6988353: refactor contended sync subsystem
Summary: reduce complexity by factoring synchronizer.cpp
Reviewed-by: dholmes, never, coleenp
--- a/hotspot/src/os/linux/vm/objectMonitor_linux.cpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,24 +0,0 @@
-
-/*
- * Copyright (c) 1999, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
--- a/hotspot/src/os/linux/vm/objectMonitor_linux.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 1999, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
-
- private:
--- a/hotspot/src/os/linux/vm/objectMonitor_linux.inline.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 1999, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
--- a/hotspot/src/os/solaris/vm/objectMonitor_solaris.cpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
--- a/hotspot/src/os/solaris/vm/objectMonitor_solaris.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
-
- private:
--- a/hotspot/src/os/solaris/vm/objectMonitor_solaris.inline.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
--- a/hotspot/src/os/windows/vm/objectMonitor_windows.cpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
-
-#include "incls/_precompiled.incl"
--- a/hotspot/src/os/windows/vm/objectMonitor_windows.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,25 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
-
- private:
--- a/hotspot/src/os/windows/vm/objectMonitor_windows.inline.hpp Mon Oct 18 09:33:24 2010 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,23 +0,0 @@
-/*
- * Copyright (c) 1998, 2005, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- *
- */
--- a/hotspot/src/share/vm/includeDB_compiler1 Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/includeDB_compiler1 Fri Oct 22 15:59:34 2010 -0400
@@ -301,6 +301,7 @@
c1_MacroAssembler.hpp assembler_<arch>.inline.hpp
c1_MacroAssembler_<arch>.cpp arrayOop.hpp
+c1_MacroAssembler_<arch>.cpp basicLock.hpp
c1_MacroAssembler_<arch>.cpp biasedLocking.hpp
c1_MacroAssembler_<arch>.cpp c1_MacroAssembler.hpp
c1_MacroAssembler_<arch>.cpp c1_Runtime1.hpp
@@ -309,7 +310,6 @@
c1_MacroAssembler_<arch>.cpp markOop.hpp
c1_MacroAssembler_<arch>.cpp os.hpp
c1_MacroAssembler_<arch>.cpp stubRoutines.hpp
-c1_MacroAssembler_<arch>.cpp synchronizer.hpp
c1_MacroAssembler_<arch>.cpp systemDictionary.hpp
c1_MacroAssembler_<arch>.hpp generate_platform_dependent_include
--- a/hotspot/src/share/vm/includeDB_core Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/includeDB_core Fri Oct 22 15:59:34 2010 -0400
@@ -300,10 +300,17 @@
barrierSet.inline.hpp barrierSet.hpp
barrierSet.inline.hpp cardTableModRefBS.hpp
+basicLock.cpp basicLock.hpp
+basicLock.cpp synchronizer.hpp
+
+basicLock.hpp handles.hpp
+basicLock.hpp markOop.hpp
+basicLock.hpp top.hpp
+
+biasedLocking.cpp basicLock.hpp
biasedLocking.cpp biasedLocking.hpp
biasedLocking.cpp klass.inline.hpp
biasedLocking.cpp markOop.hpp
-biasedLocking.cpp synchronizer.hpp
biasedLocking.cpp task.hpp
biasedLocking.cpp vframe.hpp
biasedLocking.cpp vmThread.hpp
@@ -404,13 +411,13 @@
bytecodeInterpreterWithChecks.cpp bytecodeInterpreter.cpp
bytecodeInterpreter.hpp allocation.hpp
+bytecodeInterpreter.hpp basicLock.hpp
bytecodeInterpreter.hpp bytes_<arch>.hpp
bytecodeInterpreter.hpp frame.hpp
bytecodeInterpreter.hpp globalDefinitions.hpp
bytecodeInterpreter.hpp globals.hpp
bytecodeInterpreter.hpp methodDataOop.hpp
bytecodeInterpreter.hpp methodOop.hpp
-bytecodeInterpreter.hpp synchronizer.hpp
bytecodeInterpreter.inline.hpp bytecodeInterpreter.hpp
bytecodeInterpreter.inline.hpp stubRoutines.hpp
@@ -1667,10 +1674,10 @@
frame.cpp universe.inline.hpp
frame.hpp assembler.hpp
+frame.hpp basicLock.hpp
frame.hpp methodOop.hpp
frame.hpp monitorChunk.hpp
frame.hpp registerMap.hpp
-frame.hpp synchronizer.hpp
frame.hpp top.hpp
frame.inline.hpp bytecodeInterpreter.hpp
@@ -2120,6 +2127,7 @@
interfaceSupport_<os_family>.hpp generate_platform_dependent_include
interp_masm_<arch_model>.cpp arrayOop.hpp
+interp_masm_<arch_model>.cpp basicLock.hpp
interp_masm_<arch_model>.cpp biasedLocking.hpp
interp_masm_<arch_model>.cpp interp_masm_<arch_model>.hpp
interp_masm_<arch_model>.cpp interpreterRuntime.hpp
@@ -2131,7 +2139,6 @@
interp_masm_<arch_model>.cpp methodDataOop.hpp
interp_masm_<arch_model>.cpp methodOop.hpp
interp_masm_<arch_model>.cpp sharedRuntime.hpp
-interp_masm_<arch_model>.cpp synchronizer.hpp
interp_masm_<arch_model>.cpp thread_<os_family>.inline.hpp
interp_masm_<arch_model>.hpp assembler_<arch>.inline.hpp
@@ -3094,25 +3101,26 @@
objArrayOop.hpp arrayOop.hpp
+objectMonitor.cpp dtrace.hpp
+objectMonitor.cpp handles.inline.hpp
+objectMonitor.cpp interfaceSupport.hpp
+objectMonitor.cpp markOop.hpp
+objectMonitor.cpp mutexLocker.hpp
+objectMonitor.cpp objectMonitor.hpp
+objectMonitor.cpp objectMonitor.inline.hpp
+objectMonitor.cpp oop.inline.hpp
+objectMonitor.cpp osThread.hpp
+objectMonitor.cpp os_<os_family>.inline.hpp
+objectMonitor.cpp preserveException.hpp
+objectMonitor.cpp resourceArea.hpp
+objectMonitor.cpp stubRoutines.hpp
+objectMonitor.cpp thread.hpp
+objectMonitor.cpp thread_<os_family>.inline.hpp
+objectMonitor.cpp threadService.hpp
+objectMonitor.cpp vmSymbols.hpp
+
objectMonitor.hpp os.hpp
-
-objectMonitor_<os_family>.cpp dtrace.hpp
-objectMonitor_<os_family>.cpp interfaceSupport.hpp
-objectMonitor_<os_family>.cpp objectMonitor.hpp
-objectMonitor_<os_family>.cpp objectMonitor.inline.hpp
-objectMonitor_<os_family>.cpp oop.inline.hpp
-objectMonitor_<os_family>.cpp osThread.hpp
-objectMonitor_<os_family>.cpp os_<os_family>.inline.hpp
-objectMonitor_<os_family>.cpp threadService.hpp
-objectMonitor_<os_family>.cpp thread_<os_family>.inline.hpp
-objectMonitor_<os_family>.cpp vmSymbols.hpp
-
-objectMonitor_<os_family>.hpp generate_platform_dependent_include
-objectMonitor_<os_family>.hpp os_<os_family>.inline.hpp
-objectMonitor_<os_family>.hpp thread_<os_family>.inline.hpp
-objectMonitor_<os_family>.hpp top.hpp
-
-objectMonitor_<os_family>.inline.hpp generate_platform_dependent_include
+objectMonitor.hpp perfData.hpp
oop.cpp copy.hpp
oop.cpp handles.inline.hpp
@@ -3329,7 +3337,6 @@
os_<os_family>.cpp nativeInst_<arch>.hpp
os_<os_family>.cpp no_precompiled_headers
os_<os_family>.cpp objectMonitor.hpp
-os_<os_family>.cpp objectMonitor.inline.hpp
os_<os_family>.cpp oop.inline.hpp
os_<os_family>.cpp osThread.hpp
os_<os_family>.cpp os_share_<os_family>.hpp
@@ -3389,6 +3396,12 @@
ostream.hpp allocation.hpp
ostream.hpp timer.hpp
+// include thread.hpp to prevent cyclic includes
+park.cpp thread.hpp
+
+park.hpp debug.hpp
+park.hpp globalDefinitions.hpp
+
pcDesc.cpp debugInfoRec.hpp
pcDesc.cpp nmethod.hpp
pcDesc.cpp pcDesc.hpp
@@ -4063,10 +4076,10 @@
synchronizer.cpp resourceArea.hpp
synchronizer.cpp stubRoutines.hpp
synchronizer.cpp synchronizer.hpp
-synchronizer.cpp threadService.hpp
synchronizer.cpp thread_<os_family>.inline.hpp
synchronizer.cpp vmSymbols.hpp
+synchronizer.hpp basicLock.hpp
synchronizer.hpp handles.hpp
synchronizer.hpp markOop.hpp
synchronizer.hpp perfData.hpp
@@ -4238,7 +4251,6 @@
thread.cpp mutexLocker.hpp
thread.cpp objArrayOop.hpp
thread.cpp objectMonitor.hpp
-thread.cpp objectMonitor.inline.hpp
thread.cpp oop.inline.hpp
thread.cpp oopFactory.hpp
thread.cpp osThread.hpp
@@ -4276,6 +4288,7 @@
thread.hpp oop.hpp
thread.hpp os.hpp
thread.hpp osThread.hpp
+thread.hpp park.hpp
thread.hpp safepoint.hpp
thread.hpp stubRoutines.hpp
thread.hpp threadLocalAllocBuffer.hpp
@@ -4587,6 +4600,7 @@
vframeArray.hpp growableArray.hpp
vframeArray.hpp monitorChunk.hpp
+vframe_hp.cpp basicLock.hpp
vframe_hp.cpp codeCache.hpp
vframe_hp.cpp debugInfoRec.hpp
vframe_hp.cpp handles.inline.hpp
@@ -4600,7 +4614,6 @@
vframe_hp.cpp scopeDesc.hpp
vframe_hp.cpp signature.hpp
vframe_hp.cpp stubRoutines.hpp
-vframe_hp.cpp synchronizer.hpp
vframe_hp.cpp vframeArray.hpp
vframe_hp.cpp vframe_hp.hpp
@@ -4752,6 +4765,7 @@
workgroup.cpp workgroup.hpp
workgroup.hpp taskqueue.hpp
+
workgroup.hpp thread_<os_family>.inline.hpp
xmlstream.cpp allocation.hpp
--- a/hotspot/src/share/vm/includeDB_features Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/includeDB_features Fri Oct 22 15:59:34 2010 -0400
@@ -184,6 +184,13 @@
jvmtiImpl.hpp systemDictionary.hpp
jvmtiImpl.hpp vm_operations.hpp
+jvmtiRawMonitor.cpp interfaceSupport.hpp
+jvmtiRawMonitor.cpp jvmtiRawMonitor.hpp
+jvmtiRawMonitor.cpp thread.hpp
+
+jvmtiRawMonitor.hpp growableArray.hpp
+jvmtiRawMonitor.hpp objectMonitor.hpp
+
jvmtiTagMap.cpp biasedLocking.hpp
jvmtiTagMap.cpp javaCalls.hpp
jvmtiTagMap.cpp jniHandles.hpp
--- a/hotspot/src/share/vm/includeDB_jvmti Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/includeDB_jvmti Fri Oct 22 15:59:34 2010 -0400
@@ -35,6 +35,7 @@
// jvmtiCodeBlobEvents is jck optional, please put deps in includeDB_features
jvmtiEnter.cpp jvmtiEnter.hpp
+jvmtiEnter.cpp jvmtiRawMonitor.hpp
jvmtiEnter.cpp jvmtiUtil.hpp
jvmtiEnter.hpp interfaceSupport.hpp
@@ -44,6 +45,7 @@
jvmtiEnter.hpp systemDictionary.hpp
jvmtiEnterTrace.cpp jvmtiEnter.hpp
+jvmtiEnterTrace.cpp jvmtiRawMonitor.hpp
jvmtiEnterTrace.cpp jvmtiUtil.hpp
jvmtiEnv.cpp arguments.hpp
@@ -66,11 +68,11 @@
jvmtiEnv.cpp jvmtiGetLoadedClasses.hpp
jvmtiEnv.cpp jvmtiImpl.hpp
jvmtiEnv.cpp jvmtiManageCapabilities.hpp
+jvmtiEnv.cpp jvmtiRawMonitor.hpp
jvmtiEnv.cpp jvmtiRedefineClasses.hpp
jvmtiEnv.cpp jvmtiTagMap.hpp
jvmtiEnv.cpp jvmtiThreadState.inline.hpp
jvmtiEnv.cpp jvmtiUtil.hpp
-jvmtiEnv.cpp objectMonitor.inline.hpp
jvmtiEnv.cpp osThread.hpp
jvmtiEnv.cpp preserveException.hpp
jvmtiEnv.cpp reflectionUtils.hpp
@@ -178,11 +180,13 @@
jvmtiExport.cpp jvmtiExport.hpp
jvmtiExport.cpp jvmtiImpl.hpp
jvmtiExport.cpp jvmtiManageCapabilities.hpp
+jvmtiExport.cpp jvmtiRawMonitor.hpp
jvmtiExport.cpp jvmtiTagMap.hpp
jvmtiExport.cpp jvmtiThreadState.inline.hpp
jvmtiExport.cpp nmethod.hpp
jvmtiExport.cpp objArrayKlass.hpp
jvmtiExport.cpp objArrayOop.hpp
+jvmtiExport.cpp objectMonitor.hpp
jvmtiExport.cpp objectMonitor.inline.hpp
jvmtiExport.cpp pcDesc.hpp
jvmtiExport.cpp resourceArea.hpp
@@ -210,6 +214,8 @@
jvmtiManageCapabilities.hpp allocation.hpp
jvmtiManageCapabilities.hpp jvmti.h
+// jvmtiRawMonitor is jck optional, please put deps in includeDB_features
+
jvmtiRedefineClasses.cpp bitMap.inline.hpp
jvmtiRedefineClasses.cpp codeCache.hpp
jvmtiRedefineClasses.cpp deoptimization.hpp
--- a/hotspot/src/share/vm/prims/jvmtiImpl.cpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/prims/jvmtiImpl.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -25,26 +25,6 @@
# include "incls/_precompiled.incl"
# include "incls/_jvmtiImpl.cpp.incl"
-GrowableArray<JvmtiRawMonitor*> *JvmtiPendingMonitors::_monitors = new (ResourceObj::C_HEAP) GrowableArray<JvmtiRawMonitor*>(1,true);
-
-void JvmtiPendingMonitors::transition_raw_monitors() {
- assert((Threads::number_of_threads()==1),
- "Java thread has not created yet or more than one java thread \
-is running. Raw monitor transition will not work");
- JavaThread *current_java_thread = JavaThread::current();
- assert(current_java_thread->thread_state() == _thread_in_vm, "Must be in vm");
- {
- ThreadBlockInVM __tbivm(current_java_thread);
- for(int i=0; i< count(); i++) {
- JvmtiRawMonitor *rmonitor = monitors()->at(i);
- int r = rmonitor->raw_enter(current_java_thread);
- assert(r == ObjectMonitor::OM_OK, "raw_enter should have worked");
- }
- }
- // pending monitors are converted to real monitor so delete them all.
- dispose();
-}
-
//
// class JvmtiAgentThread
//
@@ -216,57 +196,6 @@
}
}
-
-//
-// class JvmtiRawMonitor
-//
-
-JvmtiRawMonitor::JvmtiRawMonitor(const char *name) {
-#ifdef ASSERT
- _name = strcpy(NEW_C_HEAP_ARRAY(char, strlen(name) + 1), name);
-#else
- _name = NULL;
-#endif
- _magic = JVMTI_RM_MAGIC;
-}
-
-JvmtiRawMonitor::~JvmtiRawMonitor() {
-#ifdef ASSERT
- FreeHeap(_name);
-#endif
- _magic = 0;
-}
-
-
-bool
-JvmtiRawMonitor::is_valid() {
- int value = 0;
-
- // This object might not be a JvmtiRawMonitor so we can't assume
- // the _magic field is properly aligned. Get the value in a safe
- // way and then check against JVMTI_RM_MAGIC.
-
- switch (sizeof(_magic)) {
- case 2:
- value = Bytes::get_native_u2((address)&_magic);
- break;
-
- case 4:
- value = Bytes::get_native_u4((address)&_magic);
- break;
-
- case 8:
- value = Bytes::get_native_u8((address)&_magic);
- break;
-
- default:
- guarantee(false, "_magic field is an unexpected size");
- }
-
- return value == JVMTI_RM_MAGIC;
-}
-
-
//
// class JvmtiBreakpoint
//
--- a/hotspot/src/share/vm/prims/jvmtiImpl.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/prims/jvmtiImpl.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -26,7 +26,6 @@
// Forward Declarations
//
-class JvmtiRawMonitor;
class JvmtiBreakpoint;
class JvmtiBreakpoints;
@@ -327,76 +326,6 @@
return false;
}
-
-///////////////////////////////////////////////////////////////
-//
-// class JvmtiRawMonitor
-//
-// Used by JVMTI methods: All RawMonitor methods (CreateRawMonitor, EnterRawMonitor, etc.)
-//
-// Wrapper for ObjectMonitor class that saves the Monitor's name
-//
-
-class JvmtiRawMonitor : public ObjectMonitor {
-private:
- int _magic;
- char * _name;
- // JVMTI_RM_MAGIC is set in contructor and unset in destructor.
- enum { JVMTI_RM_MAGIC = (int)(('T' << 24) | ('I' << 16) | ('R' << 8) | 'M') };
-
-public:
- JvmtiRawMonitor(const char *name);
- ~JvmtiRawMonitor();
- int magic() { return _magic; }
- const char *get_name() { return _name; }
- bool is_valid();
-};
-
-// Onload pending raw monitors
-// Class is used to cache onload or onstart monitor enter
-// which will transition into real monitor when
-// VM is fully initialized.
-class JvmtiPendingMonitors : public AllStatic {
-
-private:
- static GrowableArray<JvmtiRawMonitor*> *_monitors; // Cache raw monitor enter
-
- inline static GrowableArray<JvmtiRawMonitor*>* monitors() { return _monitors; }
-
- static void dispose() {
- delete monitors();
- }
-
-public:
- static void enter(JvmtiRawMonitor *monitor) {
- monitors()->append(monitor);
- }
-
- static int count() {
- return monitors()->length();
- }
-
- static void destroy(JvmtiRawMonitor *monitor) {
- while (monitors()->contains(monitor)) {
- monitors()->remove(monitor);
- }
- }
-
- // Return false if monitor is not found in the list.
- static bool exit(JvmtiRawMonitor *monitor) {
- if (monitors()->contains(monitor)) {
- monitors()->remove(monitor);
- return true;
- } else {
- return false;
- }
- }
-
- static void transition_raw_monitors();
-};
-
-
-
///////////////////////////////////////////////////////////////
// The get/set local operations must only be done by the VM thread
// because the interpreter version needs to access oop maps, which can
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/prims/jvmtiRawMonitor.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,420 @@
+/*
+ * Copyright (c) 2003, 2007, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+# include "incls/_precompiled.incl"
+# include "incls/_jvmtiRawMonitor.cpp.incl"
+
+GrowableArray<JvmtiRawMonitor*> *JvmtiPendingMonitors::_monitors = new (ResourceObj::C_HEAP) GrowableArray<JvmtiRawMonitor*>(1,true);
+
+void JvmtiPendingMonitors::transition_raw_monitors() {
+ assert((Threads::number_of_threads()==1),
+ "Java thread has not created yet or more than one java thread \
+is running. Raw monitor transition will not work");
+ JavaThread *current_java_thread = JavaThread::current();
+ assert(current_java_thread->thread_state() == _thread_in_vm, "Must be in vm");
+ {
+ ThreadBlockInVM __tbivm(current_java_thread);
+ for(int i=0; i< count(); i++) {
+ JvmtiRawMonitor *rmonitor = monitors()->at(i);
+ int r = rmonitor->raw_enter(current_java_thread);
+ assert(r == ObjectMonitor::OM_OK, "raw_enter should have worked");
+ }
+ }
+ // pending monitors are converted to real monitor so delete them all.
+ dispose();
+}
+
+//
+// class JvmtiRawMonitor
+//
+
+JvmtiRawMonitor::JvmtiRawMonitor(const char *name) {
+#ifdef ASSERT
+ _name = strcpy(NEW_C_HEAP_ARRAY(char, strlen(name) + 1), name);
+#else
+ _name = NULL;
+#endif
+ _magic = JVMTI_RM_MAGIC;
+}
+
+JvmtiRawMonitor::~JvmtiRawMonitor() {
+#ifdef ASSERT
+ FreeHeap(_name);
+#endif
+ _magic = 0;
+}
+
+
+bool
+JvmtiRawMonitor::is_valid() {
+ int value = 0;
+
+ // This object might not be a JvmtiRawMonitor so we can't assume
+ // the _magic field is properly aligned. Get the value in a safe
+ // way and then check against JVMTI_RM_MAGIC.
+
+ switch (sizeof(_magic)) {
+ case 2:
+ value = Bytes::get_native_u2((address)&_magic);
+ break;
+
+ case 4:
+ value = Bytes::get_native_u4((address)&_magic);
+ break;
+
+ case 8:
+ value = Bytes::get_native_u8((address)&_magic);
+ break;
+
+ default:
+ guarantee(false, "_magic field is an unexpected size");
+ }
+
+ return value == JVMTI_RM_MAGIC;
+}
+
+// -------------------------------------------------------------------------
+// The raw monitor subsystem is entirely distinct from normal
+// java-synchronization or jni-synchronization. raw monitors are not
+// associated with objects. They can be implemented in any manner
+// that makes sense. The original implementors decided to piggy-back
+// the raw-monitor implementation on the existing Java objectMonitor mechanism.
+// This flaw needs to fixed. We should reimplement raw monitors as sui-generis.
+// Specifically, we should not implement raw monitors via java monitors.
+// Time permitting, we should disentangle and deconvolve the two implementations
+// and move the resulting raw monitor implementation over to the JVMTI directories.
+// Ideally, the raw monitor implementation would be built on top of
+// park-unpark and nothing else.
+//
+// raw monitors are used mainly by JVMTI
+// The raw monitor implementation borrows the ObjectMonitor structure,
+// but the operators are degenerate and extremely simple.
+//
+// Mixed use of a single objectMonitor instance -- as both a raw monitor
+// and a normal java monitor -- is not permissible.
+//
+// Note that we use the single RawMonitor_lock to protect queue operations for
+// _all_ raw monitors. This is a scalability impediment, but since raw monitor usage
+// is deprecated and rare, this is not of concern. The RawMonitor_lock can not
+// be held indefinitely. The critical sections must be short and bounded.
+//
+// -------------------------------------------------------------------------
+
+int JvmtiRawMonitor::SimpleEnter (Thread * Self) {
+ for (;;) {
+ if (Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
+ return OS_OK ;
+ }
+
+ ObjectWaiter Node (Self) ;
+ Self->_ParkEvent->reset() ; // strictly optional
+ Node.TState = ObjectWaiter::TS_ENTER ;
+
+ RawMonitor_lock->lock_without_safepoint_check() ;
+ Node._next = _EntryList ;
+ _EntryList = &Node ;
+ OrderAccess::fence() ;
+ if (_owner == NULL && Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
+ _EntryList = Node._next ;
+ RawMonitor_lock->unlock() ;
+ return OS_OK ;
+ }
+ RawMonitor_lock->unlock() ;
+ while (Node.TState == ObjectWaiter::TS_ENTER) {
+ Self->_ParkEvent->park() ;
+ }
+ }
+}
+
+int JvmtiRawMonitor::SimpleExit (Thread * Self) {
+ guarantee (_owner == Self, "invariant") ;
+ OrderAccess::release_store_ptr (&_owner, NULL) ;
+ OrderAccess::fence() ;
+ if (_EntryList == NULL) return OS_OK ;
+ ObjectWaiter * w ;
+
+ RawMonitor_lock->lock_without_safepoint_check() ;
+ w = _EntryList ;
+ if (w != NULL) {
+ _EntryList = w->_next ;
+ }
+ RawMonitor_lock->unlock() ;
+ if (w != NULL) {
+ guarantee (w ->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ ParkEvent * ev = w->_event ;
+ w->TState = ObjectWaiter::TS_RUN ;
+ OrderAccess::fence() ;
+ ev->unpark() ;
+ }
+ return OS_OK ;
+}
+
+int JvmtiRawMonitor::SimpleWait (Thread * Self, jlong millis) {
+ guarantee (_owner == Self , "invariant") ;
+ guarantee (_recursions == 0, "invariant") ;
+
+ ObjectWaiter Node (Self) ;
+ Node._notified = 0 ;
+ Node.TState = ObjectWaiter::TS_WAIT ;
+
+ RawMonitor_lock->lock_without_safepoint_check() ;
+ Node._next = _WaitSet ;
+ _WaitSet = &Node ;
+ RawMonitor_lock->unlock() ;
+
+ SimpleExit (Self) ;
+ guarantee (_owner != Self, "invariant") ;
+
+ int ret = OS_OK ;
+ if (millis <= 0) {
+ Self->_ParkEvent->park();
+ } else {
+ ret = Self->_ParkEvent->park(millis);
+ }
+
+ // If thread still resides on the waitset then unlink it.
+ // Double-checked locking -- the usage is safe in this context
+ // as we TState is volatile and the lock-unlock operators are
+ // serializing (barrier-equivalent).
+
+ if (Node.TState == ObjectWaiter::TS_WAIT) {
+ RawMonitor_lock->lock_without_safepoint_check() ;
+ if (Node.TState == ObjectWaiter::TS_WAIT) {
+ // Simple O(n) unlink, but performance isn't critical here.
+ ObjectWaiter * p ;
+ ObjectWaiter * q = NULL ;
+ for (p = _WaitSet ; p != &Node; p = p->_next) {
+ q = p ;
+ }
+ guarantee (p == &Node, "invariant") ;
+ if (q == NULL) {
+ guarantee (p == _WaitSet, "invariant") ;
+ _WaitSet = p->_next ;
+ } else {
+ guarantee (p == q->_next, "invariant") ;
+ q->_next = p->_next ;
+ }
+ Node.TState = ObjectWaiter::TS_RUN ;
+ }
+ RawMonitor_lock->unlock() ;
+ }
+
+ guarantee (Node.TState == ObjectWaiter::TS_RUN, "invariant") ;
+ SimpleEnter (Self) ;
+
+ guarantee (_owner == Self, "invariant") ;
+ guarantee (_recursions == 0, "invariant") ;
+ return ret ;
+}
+
+int JvmtiRawMonitor::SimpleNotify (Thread * Self, bool All) {
+ guarantee (_owner == Self, "invariant") ;
+ if (_WaitSet == NULL) return OS_OK ;
+
+ // We have two options:
+ // A. Transfer the threads from the WaitSet to the EntryList
+ // B. Remove the thread from the WaitSet and unpark() it.
+ //
+ // We use (B), which is crude and results in lots of futile
+ // context switching. In particular (B) induces lots of contention.
+
+ ParkEvent * ev = NULL ; // consider using a small auto array ...
+ RawMonitor_lock->lock_without_safepoint_check() ;
+ for (;;) {
+ ObjectWaiter * w = _WaitSet ;
+ if (w == NULL) break ;
+ _WaitSet = w->_next ;
+ if (ev != NULL) { ev->unpark(); ev = NULL; }
+ ev = w->_event ;
+ OrderAccess::loadstore() ;
+ w->TState = ObjectWaiter::TS_RUN ;
+ OrderAccess::storeload();
+ if (!All) break ;
+ }
+ RawMonitor_lock->unlock() ;
+ if (ev != NULL) ev->unpark();
+ return OS_OK ;
+}
+
+// Any JavaThread will enter here with state _thread_blocked
+int JvmtiRawMonitor::raw_enter(TRAPS) {
+ TEVENT (raw_enter) ;
+ void * Contended ;
+
+ // don't enter raw monitor if thread is being externally suspended, it will
+ // surprise the suspender if a "suspended" thread can still enter monitor
+ JavaThread * jt = (JavaThread *)THREAD;
+ if (THREAD->is_Java_thread()) {
+ jt->SR_lock()->lock_without_safepoint_check();
+ while (jt->is_external_suspend()) {
+ jt->SR_lock()->unlock();
+ jt->java_suspend_self();
+ jt->SR_lock()->lock_without_safepoint_check();
+ }
+ // guarded by SR_lock to avoid racing with new external suspend requests.
+ Contended = Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) ;
+ jt->SR_lock()->unlock();
+ } else {
+ Contended = Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) ;
+ }
+
+ if (Contended == THREAD) {
+ _recursions ++ ;
+ return OM_OK ;
+ }
+
+ if (Contended == NULL) {
+ guarantee (_owner == THREAD, "invariant") ;
+ guarantee (_recursions == 0, "invariant") ;
+ return OM_OK ;
+ }
+
+ THREAD->set_current_pending_monitor(this);
+
+ if (!THREAD->is_Java_thread()) {
+ // No other non-Java threads besides VM thread would acquire
+ // a raw monitor.
+ assert(THREAD->is_VM_thread(), "must be VM thread");
+ SimpleEnter (THREAD) ;
+ } else {
+ guarantee (jt->thread_state() == _thread_blocked, "invariant") ;
+ for (;;) {
+ jt->set_suspend_equivalent();
+ // cleared by handle_special_suspend_equivalent_condition() or
+ // java_suspend_self()
+ SimpleEnter (THREAD) ;
+
+ // were we externally suspended while we were waiting?
+ if (!jt->handle_special_suspend_equivalent_condition()) break ;
+
+ // This thread was externally suspended
+ //
+ // This logic isn't needed for JVMTI raw monitors,
+ // but doesn't hurt just in case the suspend rules change. This
+ // logic is needed for the JvmtiRawMonitor.wait() reentry phase.
+ // We have reentered the contended monitor, but while we were
+ // waiting another thread suspended us. We don't want to reenter
+ // the monitor while suspended because that would surprise the
+ // thread that suspended us.
+ //
+ // Drop the lock -
+ SimpleExit (THREAD) ;
+
+ jt->java_suspend_self();
+ }
+
+ assert(_owner == THREAD, "Fatal error with monitor owner!");
+ assert(_recursions == 0, "Fatal error with monitor recursions!");
+ }
+
+ THREAD->set_current_pending_monitor(NULL);
+ guarantee (_recursions == 0, "invariant") ;
+ return OM_OK;
+}
+
+// Used mainly for JVMTI raw monitor implementation
+// Also used for JvmtiRawMonitor::wait().
+int JvmtiRawMonitor::raw_exit(TRAPS) {
+ TEVENT (raw_exit) ;
+ if (THREAD != _owner) {
+ return OM_ILLEGAL_MONITOR_STATE;
+ }
+ if (_recursions > 0) {
+ --_recursions ;
+ return OM_OK ;
+ }
+
+ void * List = _EntryList ;
+ SimpleExit (THREAD) ;
+
+ return OM_OK;
+}
+
+// Used for JVMTI raw monitor implementation.
+// All JavaThreads will enter here with state _thread_blocked
+
+int JvmtiRawMonitor::raw_wait(jlong millis, bool interruptible, TRAPS) {
+ TEVENT (raw_wait) ;
+ if (THREAD != _owner) {
+ return OM_ILLEGAL_MONITOR_STATE;
+ }
+
+ // To avoid spurious wakeups we reset the parkevent -- This is strictly optional.
+ // The caller must be able to tolerate spurious returns from raw_wait().
+ THREAD->_ParkEvent->reset() ;
+ OrderAccess::fence() ;
+
+ // check interrupt event
+ if (interruptible && Thread::is_interrupted(THREAD, true)) {
+ return OM_INTERRUPTED;
+ }
+
+ intptr_t save = _recursions ;
+ _recursions = 0 ;
+ _waiters ++ ;
+ if (THREAD->is_Java_thread()) {
+ guarantee (((JavaThread *) THREAD)->thread_state() == _thread_blocked, "invariant") ;
+ ((JavaThread *)THREAD)->set_suspend_equivalent();
+ }
+ int rv = SimpleWait (THREAD, millis) ;
+ _recursions = save ;
+ _waiters -- ;
+
+ guarantee (THREAD == _owner, "invariant") ;
+ if (THREAD->is_Java_thread()) {
+ JavaThread * jSelf = (JavaThread *) THREAD ;
+ for (;;) {
+ if (!jSelf->handle_special_suspend_equivalent_condition()) break ;
+ SimpleExit (THREAD) ;
+ jSelf->java_suspend_self();
+ SimpleEnter (THREAD) ;
+ jSelf->set_suspend_equivalent() ;
+ }
+ }
+ guarantee (THREAD == _owner, "invariant") ;
+
+ if (interruptible && Thread::is_interrupted(THREAD, true)) {
+ return OM_INTERRUPTED;
+ }
+ return OM_OK ;
+}
+
+int JvmtiRawMonitor::raw_notify(TRAPS) {
+ TEVENT (raw_notify) ;
+ if (THREAD != _owner) {
+ return OM_ILLEGAL_MONITOR_STATE;
+ }
+ SimpleNotify (THREAD, false) ;
+ return OM_OK;
+}
+
+int JvmtiRawMonitor::raw_notifyAll(TRAPS) {
+ TEVENT (raw_notifyAll) ;
+ if (THREAD != _owner) {
+ return OM_ILLEGAL_MONITOR_STATE;
+ }
+ SimpleNotify (THREAD, true) ;
+ return OM_OK;
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/prims/jvmtiRawMonitor.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 1999, 2007, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+//
+// class JvmtiRawMonitor
+//
+// Used by JVMTI methods: All RawMonitor methods (CreateRawMonitor, EnterRawMonitor, etc.)
+//
+// Wrapper for ObjectMonitor class that saves the Monitor's name
+//
+
+class JvmtiRawMonitor : public ObjectMonitor {
+private:
+ int _magic;
+ char * _name;
+ // JVMTI_RM_MAGIC is set in contructor and unset in destructor.
+ enum { JVMTI_RM_MAGIC = (int)(('T' << 24) | ('I' << 16) | ('R' << 8) | 'M') };
+
+ int SimpleEnter (Thread * Self) ;
+ int SimpleExit (Thread * Self) ;
+ int SimpleWait (Thread * Self, jlong millis) ;
+ int SimpleNotify (Thread * Self, bool All) ;
+
+public:
+ JvmtiRawMonitor(const char *name);
+ ~JvmtiRawMonitor();
+ int raw_enter(TRAPS);
+ int raw_exit(TRAPS);
+ int raw_wait(jlong millis, bool interruptable, TRAPS);
+ int raw_notify(TRAPS);
+ int raw_notifyAll(TRAPS);
+ int magic() { return _magic; }
+ const char *get_name() { return _name; }
+ bool is_valid();
+};
+
+// Onload pending raw monitors
+// Class is used to cache onload or onstart monitor enter
+// which will transition into real monitor when
+// VM is fully initialized.
+class JvmtiPendingMonitors : public AllStatic {
+
+private:
+ static GrowableArray<JvmtiRawMonitor*> *_monitors; // Cache raw monitor enter
+
+ inline static GrowableArray<JvmtiRawMonitor*>* monitors() { return _monitors; }
+
+ static void dispose() {
+ delete monitors();
+ }
+
+public:
+ static void enter(JvmtiRawMonitor *monitor) {
+ monitors()->append(monitor);
+ }
+
+ static int count() {
+ return monitors()->length();
+ }
+
+ static void destroy(JvmtiRawMonitor *monitor) {
+ while (monitors()->contains(monitor)) {
+ monitors()->remove(monitor);
+ }
+ }
+
+ // Return false if monitor is not found in the list.
+ static bool exit(JvmtiRawMonitor *monitor) {
+ if (monitors()->contains(monitor)) {
+ monitors()->remove(monitor);
+ return true;
+ } else {
+ return false;
+ }
+ }
+
+ static void transition_raw_monitors();
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/basicLock.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+# include "incls/_precompiled.incl"
+# include "incls/_basicLock.cpp.incl"
+
+void BasicLock::print_on(outputStream* st) const {
+ st->print("monitor");
+}
+
+void BasicLock::move_to(oop obj, BasicLock* dest) {
+ // Check to see if we need to inflate the lock. This is only needed
+ // if an object is locked using "this" lightweight monitor. In that
+ // case, the displaced_header() is unlocked, because the
+ // displaced_header() contains the header for the originally unlocked
+ // object. However the object could have already been inflated. But it
+ // does not matter, the inflation will just a no-op. For other cases,
+ // the displaced header will be either 0x0 or 0x3, which are location
+ // independent, therefore the BasicLock is free to move.
+ //
+ // During OSR we may need to relocate a BasicLock (which contains a
+ // displaced word) from a location in an interpreter frame to a
+ // new location in a compiled frame. "this" refers to the source
+ // basiclock in the interpreter frame. "dest" refers to the destination
+ // basiclock in the new compiled frame. We *always* inflate in move_to().
+ // The always-Inflate policy works properly, but in 1.5.0 it can sometimes
+ // cause performance problems in code that makes heavy use of a small # of
+ // uncontended locks. (We'd inflate during OSR, and then sync performance
+ // would subsequently plummet because the thread would be forced thru the slow-path).
+ // This problem has been made largely moot on IA32 by inlining the inflated fast-path
+ // operations in Fast_Lock and Fast_Unlock in i486.ad.
+ //
+ // Note that there is a way to safely swing the object's markword from
+ // one stack location to another. This avoids inflation. Obviously,
+ // we need to ensure that both locations refer to the current thread's stack.
+ // There are some subtle concurrency issues, however, and since the benefit is
+ // is small (given the support for inflated fast-path locking in the fast_lock, etc)
+ // we'll leave that optimization for another time.
+
+ if (displaced_header()->is_neutral()) {
+ ObjectSynchronizer::inflate_helper(obj);
+ // WARNING: We can not put check here, because the inflation
+ // will not update the displaced header. Once BasicLock is inflated,
+ // no one should ever look at its content.
+ } else {
+ // Typically the displaced header will be 0 (recursive stack lock) or
+ // unused_mark. Naively we'd like to assert that the displaced mark
+ // value is either 0, neutral, or 3. But with the advent of the
+ // store-before-CAS avoidance in fast_lock/compiler_lock_object
+ // we can find any flavor mark in the displaced mark.
+ }
+// [RGV] The next line appears to do nothing!
+ intptr_t dh = (intptr_t) displaced_header();
+ dest->set_displaced_header(displaced_header());
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/basicLock.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,72 @@
+/*
+ * Copyright (c) 1998, 2007, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+class BasicLock VALUE_OBJ_CLASS_SPEC {
+ friend class VMStructs;
+ private:
+ volatile markOop _displaced_header;
+ public:
+ markOop displaced_header() const { return _displaced_header; }
+ void set_displaced_header(markOop header) { _displaced_header = header; }
+
+ void print_on(outputStream* st) const;
+
+ // move a basic lock (used during deoptimization
+ void move_to(oop obj, BasicLock* dest);
+
+ static int displaced_header_offset_in_bytes() { return offset_of(BasicLock, _displaced_header); }
+};
+
+// A BasicObjectLock associates a specific Java object with a BasicLock.
+// It is currently embedded in an interpreter frame.
+
+// Because some machines have alignment restrictions on the control stack,
+// the actual space allocated by the interpreter may include padding words
+// after the end of the BasicObjectLock. Also, in order to guarantee
+// alignment of the embedded BasicLock objects on such machines, we
+// put the embedded BasicLock at the beginning of the struct.
+
+class BasicObjectLock VALUE_OBJ_CLASS_SPEC {
+ friend class VMStructs;
+ private:
+ BasicLock _lock; // the lock, must be double word aligned
+ oop _obj; // object holds the lock;
+
+ public:
+ // Manipulation
+ oop obj() const { return _obj; }
+ void set_obj(oop obj) { _obj = obj; }
+ BasicLock* lock() { return &_lock; }
+
+ // Note: Use frame::interpreter_frame_monitor_size() for the size of BasicObjectLocks
+ // in interpreter activation frames since it includes machine-specific padding.
+ static int size() { return sizeof(BasicObjectLock)/wordSize; }
+
+ // GC support
+ void oops_do(OopClosure* f) { f->do_oop(&_obj); }
+
+ static int obj_offset_in_bytes() { return offset_of(BasicObjectLock, _obj); }
+ static int lock_offset_in_bytes() { return offset_of(BasicObjectLock, _lock); }
+};
+
--- a/hotspot/src/share/vm/runtime/mutex.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/mutex.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -265,48 +265,3 @@
}
};
-/*
- * Per-thread blocking support for JSR166. See the Java-level
- * Documentation for rationale. Basically, park acts like wait, unpark
- * like notify.
- *
- * 6271289 --
- * To avoid errors where an os thread expires but the JavaThread still
- * exists, Parkers are immortal (type-stable) and are recycled across
- * new threads. This parallels the ParkEvent implementation.
- * Because park-unpark allow spurious wakeups it is harmless if an
- * unpark call unparks a new thread using the old Parker reference.
- *
- * In the future we'll want to think about eliminating Parker and using
- * ParkEvent instead. There's considerable duplication between the two
- * services.
- *
- */
-
-class Parker : public os::PlatformParker {
-private:
- volatile int _counter ;
- Parker * FreeNext ;
- JavaThread * AssociatedWith ; // Current association
-
-public:
- Parker() : PlatformParker() {
- _counter = 0 ;
- FreeNext = NULL ;
- AssociatedWith = NULL ;
- }
-protected:
- ~Parker() { ShouldNotReachHere(); }
-public:
- // For simplicity of interface with Java, all forms of park (indefinite,
- // relative, and absolute) are multiplexed into one call.
- void park(bool isAbsolute, jlong time);
- void unpark();
-
- // Lifecycle operators
- static Parker * Allocate (JavaThread * t) ;
- static void Release (Parker * e) ;
-private:
- static Parker * volatile FreeList ;
- static volatile int ListLock ;
-};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/objectMonitor.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,2421 @@
+/*
+ * Copyright (c) 1998, 2009, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+# include "incls/_precompiled.incl"
+# include "incls/_objectMonitor.cpp.incl"
+
+#if defined(__GNUC__) && !defined(IA64)
+ // Need to inhibit inlining for older versions of GCC to avoid build-time failures
+ #define ATTR __attribute__((noinline))
+#else
+ #define ATTR
+#endif
+
+
+#ifdef DTRACE_ENABLED
+
+// Only bother with this argument setup if dtrace is available
+// TODO-FIXME: probes should not fire when caller is _blocked. assert() accordingly.
+
+HS_DTRACE_PROBE_DECL4(hotspot, monitor__notify,
+ jlong, uintptr_t, char*, int);
+HS_DTRACE_PROBE_DECL4(hotspot, monitor__notifyAll,
+ jlong, uintptr_t, char*, int);
+HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__enter,
+ jlong, uintptr_t, char*, int);
+HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__entered,
+ jlong, uintptr_t, char*, int);
+HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__exit,
+ jlong, uintptr_t, char*, int);
+
+#define DTRACE_MONITOR_PROBE_COMMON(klassOop, thread) \
+ char* bytes = NULL; \
+ int len = 0; \
+ jlong jtid = SharedRuntime::get_java_tid(thread); \
+ symbolOop klassname = ((oop)(klassOop))->klass()->klass_part()->name(); \
+ if (klassname != NULL) { \
+ bytes = (char*)klassname->bytes(); \
+ len = klassname->utf8_length(); \
+ }
+
+#define DTRACE_MONITOR_WAIT_PROBE(monitor, klassOop, thread, millis) \
+ { \
+ if (DTraceMonitorProbes) { \
+ DTRACE_MONITOR_PROBE_COMMON(klassOop, thread); \
+ HS_DTRACE_PROBE5(hotspot, monitor__wait, jtid, \
+ (monitor), bytes, len, (millis)); \
+ } \
+ }
+
+#define DTRACE_MONITOR_PROBE(probe, monitor, klassOop, thread) \
+ { \
+ if (DTraceMonitorProbes) { \
+ DTRACE_MONITOR_PROBE_COMMON(klassOop, thread); \
+ HS_DTRACE_PROBE4(hotspot, monitor__##probe, jtid, \
+ (uintptr_t)(monitor), bytes, len); \
+ } \
+ }
+
+#else // ndef DTRACE_ENABLED
+
+#define DTRACE_MONITOR_WAIT_PROBE(klassOop, thread, millis, mon) {;}
+#define DTRACE_MONITOR_PROBE(probe, klassOop, thread, mon) {;}
+
+#endif // ndef DTRACE_ENABLED
+
+// Tunables ...
+// The knob* variables are effectively final. Once set they should
+// never be modified hence. Consider using __read_mostly with GCC.
+
+int ObjectMonitor::Knob_Verbose = 0 ;
+int ObjectMonitor::Knob_SpinLimit = 5000 ; // derived by an external tool -
+static int Knob_LogSpins = 0 ; // enable jvmstat tally for spins
+static int Knob_HandOff = 0 ;
+static int Knob_ReportSettings = 0 ;
+
+static int Knob_SpinBase = 0 ; // Floor AKA SpinMin
+static int Knob_SpinBackOff = 0 ; // spin-loop backoff
+static int Knob_CASPenalty = -1 ; // Penalty for failed CAS
+static int Knob_OXPenalty = -1 ; // Penalty for observed _owner change
+static int Knob_SpinSetSucc = 1 ; // spinners set the _succ field
+static int Knob_SpinEarly = 1 ;
+static int Knob_SuccEnabled = 1 ; // futile wake throttling
+static int Knob_SuccRestrict = 0 ; // Limit successors + spinners to at-most-one
+static int Knob_MaxSpinners = -1 ; // Should be a function of # CPUs
+static int Knob_Bonus = 100 ; // spin success bonus
+static int Knob_BonusB = 100 ; // spin success bonus
+static int Knob_Penalty = 200 ; // spin failure penalty
+static int Knob_Poverty = 1000 ;
+static int Knob_SpinAfterFutile = 1 ; // Spin after returning from park()
+static int Knob_FixedSpin = 0 ;
+static int Knob_OState = 3 ; // Spinner checks thread state of _owner
+static int Knob_UsePause = 1 ;
+static int Knob_ExitPolicy = 0 ;
+static int Knob_PreSpin = 10 ; // 20-100 likely better
+static int Knob_ResetEvent = 0 ;
+static int BackOffMask = 0 ;
+
+static int Knob_FastHSSEC = 0 ;
+static int Knob_MoveNotifyee = 2 ; // notify() - disposition of notifyee
+static int Knob_QMode = 0 ; // EntryList-cxq policy - queue discipline
+static volatile int InitDone = 0 ;
+
+#define TrySpin TrySpin_VaryDuration
+
+// -----------------------------------------------------------------------------
+// Theory of operations -- Monitors lists, thread residency, etc:
+//
+// * A thread acquires ownership of a monitor by successfully
+// CAS()ing the _owner field from null to non-null.
+//
+// * Invariant: A thread appears on at most one monitor list --
+// cxq, EntryList or WaitSet -- at any one time.
+//
+// * Contending threads "push" themselves onto the cxq with CAS
+// and then spin/park.
+//
+// * After a contending thread eventually acquires the lock it must
+// dequeue itself from either the EntryList or the cxq.
+//
+// * The exiting thread identifies and unparks an "heir presumptive"
+// tentative successor thread on the EntryList. Critically, the
+// exiting thread doesn't unlink the successor thread from the EntryList.
+// After having been unparked, the wakee will recontend for ownership of
+// the monitor. The successor (wakee) will either acquire the lock or
+// re-park itself.
+//
+// Succession is provided for by a policy of competitive handoff.
+// The exiting thread does _not_ grant or pass ownership to the
+// successor thread. (This is also referred to as "handoff" succession").
+// Instead the exiting thread releases ownership and possibly wakes
+// a successor, so the successor can (re)compete for ownership of the lock.
+// If the EntryList is empty but the cxq is populated the exiting
+// thread will drain the cxq into the EntryList. It does so by
+// by detaching the cxq (installing null with CAS) and folding
+// the threads from the cxq into the EntryList. The EntryList is
+// doubly linked, while the cxq is singly linked because of the
+// CAS-based "push" used to enqueue recently arrived threads (RATs).
+//
+// * Concurrency invariants:
+//
+// -- only the monitor owner may access or mutate the EntryList.
+// The mutex property of the monitor itself protects the EntryList
+// from concurrent interference.
+// -- Only the monitor owner may detach the cxq.
+//
+// * The monitor entry list operations avoid locks, but strictly speaking
+// they're not lock-free. Enter is lock-free, exit is not.
+// See http://j2se.east/~dice/PERSIST/040825-LockFreeQueues.html
+//
+// * The cxq can have multiple concurrent "pushers" but only one concurrent
+// detaching thread. This mechanism is immune from the ABA corruption.
+// More precisely, the CAS-based "push" onto cxq is ABA-oblivious.
+//
+// * Taken together, the cxq and the EntryList constitute or form a
+// single logical queue of threads stalled trying to acquire the lock.
+// We use two distinct lists to improve the odds of a constant-time
+// dequeue operation after acquisition (in the ::enter() epilog) and
+// to reduce heat on the list ends. (c.f. Michael Scott's "2Q" algorithm).
+// A key desideratum is to minimize queue & monitor metadata manipulation
+// that occurs while holding the monitor lock -- that is, we want to
+// minimize monitor lock holds times. Note that even a small amount of
+// fixed spinning will greatly reduce the # of enqueue-dequeue operations
+// on EntryList|cxq. That is, spinning relieves contention on the "inner"
+// locks and monitor metadata.
+//
+// Cxq points to the the set of Recently Arrived Threads attempting entry.
+// Because we push threads onto _cxq with CAS, the RATs must take the form of
+// a singly-linked LIFO. We drain _cxq into EntryList at unlock-time when
+// the unlocking thread notices that EntryList is null but _cxq is != null.
+//
+// The EntryList is ordered by the prevailing queue discipline and
+// can be organized in any convenient fashion, such as a doubly-linked list or
+// a circular doubly-linked list. Critically, we want insert and delete operations
+// to operate in constant-time. If we need a priority queue then something akin
+// to Solaris' sleepq would work nicely. Viz.,
+// http://agg.eng/ws/on10_nightly/source/usr/src/uts/common/os/sleepq.c.
+// Queue discipline is enforced at ::exit() time, when the unlocking thread
+// drains the cxq into the EntryList, and orders or reorders the threads on the
+// EntryList accordingly.
+//
+// Barring "lock barging", this mechanism provides fair cyclic ordering,
+// somewhat similar to an elevator-scan.
+//
+// * The monitor synchronization subsystem avoids the use of native
+// synchronization primitives except for the narrow platform-specific
+// park-unpark abstraction. See the comments in os_solaris.cpp regarding
+// the semantics of park-unpark. Put another way, this monitor implementation
+// depends only on atomic operations and park-unpark. The monitor subsystem
+// manages all RUNNING->BLOCKED and BLOCKED->READY transitions while the
+// underlying OS manages the READY<->RUN transitions.
+//
+// * Waiting threads reside on the WaitSet list -- wait() puts
+// the caller onto the WaitSet.
+//
+// * notify() or notifyAll() simply transfers threads from the WaitSet to
+// either the EntryList or cxq. Subsequent exit() operations will
+// unpark the notifyee. Unparking a notifee in notify() is inefficient -
+// it's likely the notifyee would simply impale itself on the lock held
+// by the notifier.
+//
+// * An interesting alternative is to encode cxq as (List,LockByte) where
+// the LockByte is 0 iff the monitor is owned. _owner is simply an auxiliary
+// variable, like _recursions, in the scheme. The threads or Events that form
+// the list would have to be aligned in 256-byte addresses. A thread would
+// try to acquire the lock or enqueue itself with CAS, but exiting threads
+// could use a 1-0 protocol and simply STB to set the LockByte to 0.
+// Note that is is *not* word-tearing, but it does presume that full-word
+// CAS operations are coherent with intermix with STB operations. That's true
+// on most common processors.
+//
+// * See also http://blogs.sun.com/dave
+
+
+// -----------------------------------------------------------------------------
+// Enter support
+
+bool ObjectMonitor::try_enter(Thread* THREAD) {
+ if (THREAD != _owner) {
+ if (THREAD->is_lock_owned ((address)_owner)) {
+ assert(_recursions == 0, "internal state error");
+ _owner = THREAD ;
+ _recursions = 1 ;
+ OwnerIsThread = 1 ;
+ return true;
+ }
+ if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
+ return false;
+ }
+ return true;
+ } else {
+ _recursions++;
+ return true;
+ }
+}
+
+void ATTR ObjectMonitor::enter(TRAPS) {
+ // The following code is ordered to check the most common cases first
+ // and to reduce RTS->RTO cache line upgrades on SPARC and IA32 processors.
+ Thread * const Self = THREAD ;
+ void * cur ;
+
+ cur = Atomic::cmpxchg_ptr (Self, &_owner, NULL) ;
+ if (cur == NULL) {
+ // Either ASSERT _recursions == 0 or explicitly set _recursions = 0.
+ assert (_recursions == 0 , "invariant") ;
+ assert (_owner == Self, "invariant") ;
+ // CONSIDER: set or assert OwnerIsThread == 1
+ return ;
+ }
+
+ if (cur == Self) {
+ // TODO-FIXME: check for integer overflow! BUGID 6557169.
+ _recursions ++ ;
+ return ;
+ }
+
+ if (Self->is_lock_owned ((address)cur)) {
+ assert (_recursions == 0, "internal state error");
+ _recursions = 1 ;
+ // Commute owner from a thread-specific on-stack BasicLockObject address to
+ // a full-fledged "Thread *".
+ _owner = Self ;
+ OwnerIsThread = 1 ;
+ return ;
+ }
+
+ // We've encountered genuine contention.
+ assert (Self->_Stalled == 0, "invariant") ;
+ Self->_Stalled = intptr_t(this) ;
+
+ // Try one round of spinning *before* enqueueing Self
+ // and before going through the awkward and expensive state
+ // transitions. The following spin is strictly optional ...
+ // Note that if we acquire the monitor from an initial spin
+ // we forgo posting JVMTI events and firing DTRACE probes.
+ if (Knob_SpinEarly && TrySpin (Self) > 0) {
+ assert (_owner == Self , "invariant") ;
+ assert (_recursions == 0 , "invariant") ;
+ assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
+ Self->_Stalled = 0 ;
+ return ;
+ }
+
+ assert (_owner != Self , "invariant") ;
+ assert (_succ != Self , "invariant") ;
+ assert (Self->is_Java_thread() , "invariant") ;
+ JavaThread * jt = (JavaThread *) Self ;
+ assert (!SafepointSynchronize::is_at_safepoint(), "invariant") ;
+ assert (jt->thread_state() != _thread_blocked , "invariant") ;
+ assert (this->object() != NULL , "invariant") ;
+ assert (_count >= 0, "invariant") ;
+
+ // Prevent deflation at STW-time. See deflate_idle_monitors() and is_busy().
+ // Ensure the object-monitor relationship remains stable while there's contention.
+ Atomic::inc_ptr(&_count);
+
+ { // Change java thread status to indicate blocked on monitor enter.
+ JavaThreadBlockedOnMonitorEnterState jtbmes(jt, this);
+
+ DTRACE_MONITOR_PROBE(contended__enter, this, object(), jt);
+ if (JvmtiExport::should_post_monitor_contended_enter()) {
+ JvmtiExport::post_monitor_contended_enter(jt, this);
+ }
+
+ OSThreadContendState osts(Self->osthread());
+ ThreadBlockInVM tbivm(jt);
+
+ Self->set_current_pending_monitor(this);
+
+ // TODO-FIXME: change the following for(;;) loop to straight-line code.
+ for (;;) {
+ jt->set_suspend_equivalent();
+ // cleared by handle_special_suspend_equivalent_condition()
+ // or java_suspend_self()
+
+ EnterI (THREAD) ;
+
+ if (!ExitSuspendEquivalent(jt)) break ;
+
+ //
+ // We have acquired the contended monitor, but while we were
+ // waiting another thread suspended us. We don't want to enter
+ // the monitor while suspended because that would surprise the
+ // thread that suspended us.
+ //
+ _recursions = 0 ;
+ _succ = NULL ;
+ exit (Self) ;
+
+ jt->java_suspend_self();
+ }
+ Self->set_current_pending_monitor(NULL);
+ }
+
+ Atomic::dec_ptr(&_count);
+ assert (_count >= 0, "invariant") ;
+ Self->_Stalled = 0 ;
+
+ // Must either set _recursions = 0 or ASSERT _recursions == 0.
+ assert (_recursions == 0 , "invariant") ;
+ assert (_owner == Self , "invariant") ;
+ assert (_succ != Self , "invariant") ;
+ assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
+
+ // The thread -- now the owner -- is back in vm mode.
+ // Report the glorious news via TI,DTrace and jvmstat.
+ // The probe effect is non-trivial. All the reportage occurs
+ // while we hold the monitor, increasing the length of the critical
+ // section. Amdahl's parallel speedup law comes vividly into play.
+ //
+ // Another option might be to aggregate the events (thread local or
+ // per-monitor aggregation) and defer reporting until a more opportune
+ // time -- such as next time some thread encounters contention but has
+ // yet to acquire the lock. While spinning that thread could
+ // spinning we could increment JVMStat counters, etc.
+
+ DTRACE_MONITOR_PROBE(contended__entered, this, object(), jt);
+ if (JvmtiExport::should_post_monitor_contended_entered()) {
+ JvmtiExport::post_monitor_contended_entered(jt, this);
+ }
+ if (ObjectMonitor::_sync_ContendedLockAttempts != NULL) {
+ ObjectMonitor::_sync_ContendedLockAttempts->inc() ;
+ }
+}
+
+
+// Caveat: TryLock() is not necessarily serializing if it returns failure.
+// Callers must compensate as needed.
+
+int ObjectMonitor::TryLock (Thread * Self) {
+ for (;;) {
+ void * own = _owner ;
+ if (own != NULL) return 0 ;
+ if (Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
+ // Either guarantee _recursions == 0 or set _recursions = 0.
+ assert (_recursions == 0, "invariant") ;
+ assert (_owner == Self, "invariant") ;
+ // CONSIDER: set or assert that OwnerIsThread == 1
+ return 1 ;
+ }
+ // The lock had been free momentarily, but we lost the race to the lock.
+ // Interference -- the CAS failed.
+ // We can either return -1 or retry.
+ // Retry doesn't make as much sense because the lock was just acquired.
+ if (true) return -1 ;
+ }
+}
+
+void ATTR ObjectMonitor::EnterI (TRAPS) {
+ Thread * Self = THREAD ;
+ assert (Self->is_Java_thread(), "invariant") ;
+ assert (((JavaThread *) Self)->thread_state() == _thread_blocked , "invariant") ;
+
+ // Try the lock - TATAS
+ if (TryLock (Self) > 0) {
+ assert (_succ != Self , "invariant") ;
+ assert (_owner == Self , "invariant") ;
+ assert (_Responsible != Self , "invariant") ;
+ return ;
+ }
+
+ DeferredInitialize () ;
+
+ // We try one round of spinning *before* enqueueing Self.
+ //
+ // If the _owner is ready but OFFPROC we could use a YieldTo()
+ // operation to donate the remainder of this thread's quantum
+ // to the owner. This has subtle but beneficial affinity
+ // effects.
+
+ if (TrySpin (Self) > 0) {
+ assert (_owner == Self , "invariant") ;
+ assert (_succ != Self , "invariant") ;
+ assert (_Responsible != Self , "invariant") ;
+ return ;
+ }
+
+ // The Spin failed -- Enqueue and park the thread ...
+ assert (_succ != Self , "invariant") ;
+ assert (_owner != Self , "invariant") ;
+ assert (_Responsible != Self , "invariant") ;
+
+ // Enqueue "Self" on ObjectMonitor's _cxq.
+ //
+ // Node acts as a proxy for Self.
+ // As an aside, if were to ever rewrite the synchronization code mostly
+ // in Java, WaitNodes, ObjectMonitors, and Events would become 1st-class
+ // Java objects. This would avoid awkward lifecycle and liveness issues,
+ // as well as eliminate a subset of ABA issues.
+ // TODO: eliminate ObjectWaiter and enqueue either Threads or Events.
+ //
+
+ ObjectWaiter node(Self) ;
+ Self->_ParkEvent->reset() ;
+ node._prev = (ObjectWaiter *) 0xBAD ;
+ node.TState = ObjectWaiter::TS_CXQ ;
+
+ // Push "Self" onto the front of the _cxq.
+ // Once on cxq/EntryList, Self stays on-queue until it acquires the lock.
+ // Note that spinning tends to reduce the rate at which threads
+ // enqueue and dequeue on EntryList|cxq.
+ ObjectWaiter * nxt ;
+ for (;;) {
+ node._next = nxt = _cxq ;
+ if (Atomic::cmpxchg_ptr (&node, &_cxq, nxt) == nxt) break ;
+
+ // Interference - the CAS failed because _cxq changed. Just retry.
+ // As an optional optimization we retry the lock.
+ if (TryLock (Self) > 0) {
+ assert (_succ != Self , "invariant") ;
+ assert (_owner == Self , "invariant") ;
+ assert (_Responsible != Self , "invariant") ;
+ return ;
+ }
+ }
+
+ // Check for cxq|EntryList edge transition to non-null. This indicates
+ // the onset of contention. While contention persists exiting threads
+ // will use a ST:MEMBAR:LD 1-1 exit protocol. When contention abates exit
+ // operations revert to the faster 1-0 mode. This enter operation may interleave
+ // (race) a concurrent 1-0 exit operation, resulting in stranding, so we
+ // arrange for one of the contending thread to use a timed park() operations
+ // to detect and recover from the race. (Stranding is form of progress failure
+ // where the monitor is unlocked but all the contending threads remain parked).
+ // That is, at least one of the contended threads will periodically poll _owner.
+ // One of the contending threads will become the designated "Responsible" thread.
+ // The Responsible thread uses a timed park instead of a normal indefinite park
+ // operation -- it periodically wakes and checks for and recovers from potential
+ // strandings admitted by 1-0 exit operations. We need at most one Responsible
+ // thread per-monitor at any given moment. Only threads on cxq|EntryList may
+ // be responsible for a monitor.
+ //
+ // Currently, one of the contended threads takes on the added role of "Responsible".
+ // A viable alternative would be to use a dedicated "stranding checker" thread
+ // that periodically iterated over all the threads (or active monitors) and unparked
+ // successors where there was risk of stranding. This would help eliminate the
+ // timer scalability issues we see on some platforms as we'd only have one thread
+ // -- the checker -- parked on a timer.
+
+ if ((SyncFlags & 16) == 0 && nxt == NULL && _EntryList == NULL) {
+ // Try to assume the role of responsible thread for the monitor.
+ // CONSIDER: ST vs CAS vs { if (Responsible==null) Responsible=Self }
+ Atomic::cmpxchg_ptr (Self, &_Responsible, NULL) ;
+ }
+
+ // The lock have been released while this thread was occupied queueing
+ // itself onto _cxq. To close the race and avoid "stranding" and
+ // progress-liveness failure we must resample-retry _owner before parking.
+ // Note the Dekker/Lamport duality: ST cxq; MEMBAR; LD Owner.
+ // In this case the ST-MEMBAR is accomplished with CAS().
+ //
+ // TODO: Defer all thread state transitions until park-time.
+ // Since state transitions are heavy and inefficient we'd like
+ // to defer the state transitions until absolutely necessary,
+ // and in doing so avoid some transitions ...
+
+ TEVENT (Inflated enter - Contention) ;
+ int nWakeups = 0 ;
+ int RecheckInterval = 1 ;
+
+ for (;;) {
+
+ if (TryLock (Self) > 0) break ;
+ assert (_owner != Self, "invariant") ;
+
+ if ((SyncFlags & 2) && _Responsible == NULL) {
+ Atomic::cmpxchg_ptr (Self, &_Responsible, NULL) ;
+ }
+
+ // park self
+ if (_Responsible == Self || (SyncFlags & 1)) {
+ TEVENT (Inflated enter - park TIMED) ;
+ Self->_ParkEvent->park ((jlong) RecheckInterval) ;
+ // Increase the RecheckInterval, but clamp the value.
+ RecheckInterval *= 8 ;
+ if (RecheckInterval > 1000) RecheckInterval = 1000 ;
+ } else {
+ TEVENT (Inflated enter - park UNTIMED) ;
+ Self->_ParkEvent->park() ;
+ }
+
+ if (TryLock(Self) > 0) break ;
+
+ // The lock is still contested.
+ // Keep a tally of the # of futile wakeups.
+ // Note that the counter is not protected by a lock or updated by atomics.
+ // That is by design - we trade "lossy" counters which are exposed to
+ // races during updates for a lower probe effect.
+ TEVENT (Inflated enter - Futile wakeup) ;
+ if (ObjectMonitor::_sync_FutileWakeups != NULL) {
+ ObjectMonitor::_sync_FutileWakeups->inc() ;
+ }
+ ++ nWakeups ;
+
+ // Assuming this is not a spurious wakeup we'll normally find _succ == Self.
+ // We can defer clearing _succ until after the spin completes
+ // TrySpin() must tolerate being called with _succ == Self.
+ // Try yet another round of adaptive spinning.
+ if ((Knob_SpinAfterFutile & 1) && TrySpin (Self) > 0) break ;
+
+ // We can find that we were unpark()ed and redesignated _succ while
+ // we were spinning. That's harmless. If we iterate and call park(),
+ // park() will consume the event and return immediately and we'll
+ // just spin again. This pattern can repeat, leaving _succ to simply
+ // spin on a CPU. Enable Knob_ResetEvent to clear pending unparks().
+ // Alternately, we can sample fired() here, and if set, forgo spinning
+ // in the next iteration.
+
+ if ((Knob_ResetEvent & 1) && Self->_ParkEvent->fired()) {
+ Self->_ParkEvent->reset() ;
+ OrderAccess::fence() ;
+ }
+ if (_succ == Self) _succ = NULL ;
+
+ // Invariant: after clearing _succ a thread *must* retry _owner before parking.
+ OrderAccess::fence() ;
+ }
+
+ // Egress :
+ // Self has acquired the lock -- Unlink Self from the cxq or EntryList.
+ // Normally we'll find Self on the EntryList .
+ // From the perspective of the lock owner (this thread), the
+ // EntryList is stable and cxq is prepend-only.
+ // The head of cxq is volatile but the interior is stable.
+ // In addition, Self.TState is stable.
+
+ assert (_owner == Self , "invariant") ;
+ assert (object() != NULL , "invariant") ;
+ // I'd like to write:
+ // guarantee (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
+ // but as we're at a safepoint that's not safe.
+
+ UnlinkAfterAcquire (Self, &node) ;
+ if (_succ == Self) _succ = NULL ;
+
+ assert (_succ != Self, "invariant") ;
+ if (_Responsible == Self) {
+ _Responsible = NULL ;
+ // Dekker pivot-point.
+ // Consider OrderAccess::storeload() here
+
+ // We may leave threads on cxq|EntryList without a designated
+ // "Responsible" thread. This is benign. When this thread subsequently
+ // exits the monitor it can "see" such preexisting "old" threads --
+ // threads that arrived on the cxq|EntryList before the fence, above --
+ // by LDing cxq|EntryList. Newly arrived threads -- that is, threads
+ // that arrive on cxq after the ST:MEMBAR, above -- will set Responsible
+ // non-null and elect a new "Responsible" timer thread.
+ //
+ // This thread executes:
+ // ST Responsible=null; MEMBAR (in enter epilog - here)
+ // LD cxq|EntryList (in subsequent exit)
+ //
+ // Entering threads in the slow/contended path execute:
+ // ST cxq=nonnull; MEMBAR; LD Responsible (in enter prolog)
+ // The (ST cxq; MEMBAR) is accomplished with CAS().
+ //
+ // The MEMBAR, above, prevents the LD of cxq|EntryList in the subsequent
+ // exit operation from floating above the ST Responsible=null.
+ //
+ // In *practice* however, EnterI() is always followed by some atomic
+ // operation such as the decrement of _count in ::enter(). Those atomics
+ // obviate the need for the explicit MEMBAR, above.
+ }
+
+ // We've acquired ownership with CAS().
+ // CAS is serializing -- it has MEMBAR/FENCE-equivalent semantics.
+ // But since the CAS() this thread may have also stored into _succ,
+ // EntryList, cxq or Responsible. These meta-data updates must be
+ // visible __before this thread subsequently drops the lock.
+ // Consider what could occur if we didn't enforce this constraint --
+ // STs to monitor meta-data and user-data could reorder with (become
+ // visible after) the ST in exit that drops ownership of the lock.
+ // Some other thread could then acquire the lock, but observe inconsistent
+ // or old monitor meta-data and heap data. That violates the JMM.
+ // To that end, the 1-0 exit() operation must have at least STST|LDST
+ // "release" barrier semantics. Specifically, there must be at least a
+ // STST|LDST barrier in exit() before the ST of null into _owner that drops
+ // the lock. The barrier ensures that changes to monitor meta-data and data
+ // protected by the lock will be visible before we release the lock, and
+ // therefore before some other thread (CPU) has a chance to acquire the lock.
+ // See also: http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
+ //
+ // Critically, any prior STs to _succ or EntryList must be visible before
+ // the ST of null into _owner in the *subsequent* (following) corresponding
+ // monitorexit. Recall too, that in 1-0 mode monitorexit does not necessarily
+ // execute a serializing instruction.
+
+ if (SyncFlags & 8) {
+ OrderAccess::fence() ;
+ }
+ return ;
+}
+
+// ReenterI() is a specialized inline form of the latter half of the
+// contended slow-path from EnterI(). We use ReenterI() only for
+// monitor reentry in wait().
+//
+// In the future we should reconcile EnterI() and ReenterI(), adding
+// Knob_Reset and Knob_SpinAfterFutile support and restructuring the
+// loop accordingly.
+
+void ATTR ObjectMonitor::ReenterI (Thread * Self, ObjectWaiter * SelfNode) {
+ assert (Self != NULL , "invariant") ;
+ assert (SelfNode != NULL , "invariant") ;
+ assert (SelfNode->_thread == Self , "invariant") ;
+ assert (_waiters > 0 , "invariant") ;
+ assert (((oop)(object()))->mark() == markOopDesc::encode(this) , "invariant") ;
+ assert (((JavaThread *)Self)->thread_state() != _thread_blocked, "invariant") ;
+ JavaThread * jt = (JavaThread *) Self ;
+
+ int nWakeups = 0 ;
+ for (;;) {
+ ObjectWaiter::TStates v = SelfNode->TState ;
+ guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
+ assert (_owner != Self, "invariant") ;
+
+ if (TryLock (Self) > 0) break ;
+ if (TrySpin (Self) > 0) break ;
+
+ TEVENT (Wait Reentry - parking) ;
+
+ // State transition wrappers around park() ...
+ // ReenterI() wisely defers state transitions until
+ // it's clear we must park the thread.
+ {
+ OSThreadContendState osts(Self->osthread());
+ ThreadBlockInVM tbivm(jt);
+
+ // cleared by handle_special_suspend_equivalent_condition()
+ // or java_suspend_self()
+ jt->set_suspend_equivalent();
+ if (SyncFlags & 1) {
+ Self->_ParkEvent->park ((jlong)1000) ;
+ } else {
+ Self->_ParkEvent->park () ;
+ }
+
+ // were we externally suspended while we were waiting?
+ for (;;) {
+ if (!ExitSuspendEquivalent (jt)) break ;
+ if (_succ == Self) { _succ = NULL; OrderAccess::fence(); }
+ jt->java_suspend_self();
+ jt->set_suspend_equivalent();
+ }
+ }
+
+ // Try again, but just so we distinguish between futile wakeups and
+ // successful wakeups. The following test isn't algorithmically
+ // necessary, but it helps us maintain sensible statistics.
+ if (TryLock(Self) > 0) break ;
+
+ // The lock is still contested.
+ // Keep a tally of the # of futile wakeups.
+ // Note that the counter is not protected by a lock or updated by atomics.
+ // That is by design - we trade "lossy" counters which are exposed to
+ // races during updates for a lower probe effect.
+ TEVENT (Wait Reentry - futile wakeup) ;
+ ++ nWakeups ;
+
+ // Assuming this is not a spurious wakeup we'll normally
+ // find that _succ == Self.
+ if (_succ == Self) _succ = NULL ;
+
+ // Invariant: after clearing _succ a contending thread
+ // *must* retry _owner before parking.
+ OrderAccess::fence() ;
+
+ if (ObjectMonitor::_sync_FutileWakeups != NULL) {
+ ObjectMonitor::_sync_FutileWakeups->inc() ;
+ }
+ }
+
+ // Self has acquired the lock -- Unlink Self from the cxq or EntryList .
+ // Normally we'll find Self on the EntryList.
+ // Unlinking from the EntryList is constant-time and atomic-free.
+ // From the perspective of the lock owner (this thread), the
+ // EntryList is stable and cxq is prepend-only.
+ // The head of cxq is volatile but the interior is stable.
+ // In addition, Self.TState is stable.
+
+ assert (_owner == Self, "invariant") ;
+ assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
+ UnlinkAfterAcquire (Self, SelfNode) ;
+ if (_succ == Self) _succ = NULL ;
+ assert (_succ != Self, "invariant") ;
+ SelfNode->TState = ObjectWaiter::TS_RUN ;
+ OrderAccess::fence() ; // see comments at the end of EnterI()
+}
+
+// after the thread acquires the lock in ::enter(). Equally, we could defer
+// unlinking the thread until ::exit()-time.
+
+void ObjectMonitor::UnlinkAfterAcquire (Thread * Self, ObjectWaiter * SelfNode)
+{
+ assert (_owner == Self, "invariant") ;
+ assert (SelfNode->_thread == Self, "invariant") ;
+
+ if (SelfNode->TState == ObjectWaiter::TS_ENTER) {
+ // Normal case: remove Self from the DLL EntryList .
+ // This is a constant-time operation.
+ ObjectWaiter * nxt = SelfNode->_next ;
+ ObjectWaiter * prv = SelfNode->_prev ;
+ if (nxt != NULL) nxt->_prev = prv ;
+ if (prv != NULL) prv->_next = nxt ;
+ if (SelfNode == _EntryList ) _EntryList = nxt ;
+ assert (nxt == NULL || nxt->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ assert (prv == NULL || prv->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ TEVENT (Unlink from EntryList) ;
+ } else {
+ guarantee (SelfNode->TState == ObjectWaiter::TS_CXQ, "invariant") ;
+ // Inopportune interleaving -- Self is still on the cxq.
+ // This usually means the enqueue of self raced an exiting thread.
+ // Normally we'll find Self near the front of the cxq, so
+ // dequeueing is typically fast. If needbe we can accelerate
+ // this with some MCS/CHL-like bidirectional list hints and advisory
+ // back-links so dequeueing from the interior will normally operate
+ // in constant-time.
+ // Dequeue Self from either the head (with CAS) or from the interior
+ // with a linear-time scan and normal non-atomic memory operations.
+ // CONSIDER: if Self is on the cxq then simply drain cxq into EntryList
+ // and then unlink Self from EntryList. We have to drain eventually,
+ // so it might as well be now.
+
+ ObjectWaiter * v = _cxq ;
+ assert (v != NULL, "invariant") ;
+ if (v != SelfNode || Atomic::cmpxchg_ptr (SelfNode->_next, &_cxq, v) != v) {
+ // The CAS above can fail from interference IFF a "RAT" arrived.
+ // In that case Self must be in the interior and can no longer be
+ // at the head of cxq.
+ if (v == SelfNode) {
+ assert (_cxq != v, "invariant") ;
+ v = _cxq ; // CAS above failed - start scan at head of list
+ }
+ ObjectWaiter * p ;
+ ObjectWaiter * q = NULL ;
+ for (p = v ; p != NULL && p != SelfNode; p = p->_next) {
+ q = p ;
+ assert (p->TState == ObjectWaiter::TS_CXQ, "invariant") ;
+ }
+ assert (v != SelfNode, "invariant") ;
+ assert (p == SelfNode, "Node not found on cxq") ;
+ assert (p != _cxq, "invariant") ;
+ assert (q != NULL, "invariant") ;
+ assert (q->_next == p, "invariant") ;
+ q->_next = p->_next ;
+ }
+ TEVENT (Unlink from cxq) ;
+ }
+
+ // Diagnostic hygiene ...
+ SelfNode->_prev = (ObjectWaiter *) 0xBAD ;
+ SelfNode->_next = (ObjectWaiter *) 0xBAD ;
+ SelfNode->TState = ObjectWaiter::TS_RUN ;
+}
+
+// -----------------------------------------------------------------------------
+// Exit support
+//
+// exit()
+// ~~~~~~
+// Note that the collector can't reclaim the objectMonitor or deflate
+// the object out from underneath the thread calling ::exit() as the
+// thread calling ::exit() never transitions to a stable state.
+// This inhibits GC, which in turn inhibits asynchronous (and
+// inopportune) reclamation of "this".
+//
+// We'd like to assert that: (THREAD->thread_state() != _thread_blocked) ;
+// There's one exception to the claim above, however. EnterI() can call
+// exit() to drop a lock if the acquirer has been externally suspended.
+// In that case exit() is called with _thread_state as _thread_blocked,
+// but the monitor's _count field is > 0, which inhibits reclamation.
+//
+// 1-0 exit
+// ~~~~~~~~
+// ::exit() uses a canonical 1-1 idiom with a MEMBAR although some of
+// the fast-path operators have been optimized so the common ::exit()
+// operation is 1-0. See i486.ad fast_unlock(), for instance.
+// The code emitted by fast_unlock() elides the usual MEMBAR. This
+// greatly improves latency -- MEMBAR and CAS having considerable local
+// latency on modern processors -- but at the cost of "stranding". Absent the
+// MEMBAR, a thread in fast_unlock() can race a thread in the slow
+// ::enter() path, resulting in the entering thread being stranding
+// and a progress-liveness failure. Stranding is extremely rare.
+// We use timers (timed park operations) & periodic polling to detect
+// and recover from stranding. Potentially stranded threads periodically
+// wake up and poll the lock. See the usage of the _Responsible variable.
+//
+// The CAS() in enter provides for safety and exclusion, while the CAS or
+// MEMBAR in exit provides for progress and avoids stranding. 1-0 locking
+// eliminates the CAS/MEMBAR from the exist path, but it admits stranding.
+// We detect and recover from stranding with timers.
+//
+// If a thread transiently strands it'll park until (a) another
+// thread acquires the lock and then drops the lock, at which time the
+// exiting thread will notice and unpark the stranded thread, or, (b)
+// the timer expires. If the lock is high traffic then the stranding latency
+// will be low due to (a). If the lock is low traffic then the odds of
+// stranding are lower, although the worst-case stranding latency
+// is longer. Critically, we don't want to put excessive load in the
+// platform's timer subsystem. We want to minimize both the timer injection
+// rate (timers created/sec) as well as the number of timers active at
+// any one time. (more precisely, we want to minimize timer-seconds, which is
+// the integral of the # of active timers at any instant over time).
+// Both impinge on OS scalability. Given that, at most one thread parked on
+// a monitor will use a timer.
+
+void ATTR ObjectMonitor::exit(TRAPS) {
+ Thread * Self = THREAD ;
+ if (THREAD != _owner) {
+ if (THREAD->is_lock_owned((address) _owner)) {
+ // Transmute _owner from a BasicLock pointer to a Thread address.
+ // We don't need to hold _mutex for this transition.
+ // Non-null to Non-null is safe as long as all readers can
+ // tolerate either flavor.
+ assert (_recursions == 0, "invariant") ;
+ _owner = THREAD ;
+ _recursions = 0 ;
+ OwnerIsThread = 1 ;
+ } else {
+ // NOTE: we need to handle unbalanced monitor enter/exit
+ // in native code by throwing an exception.
+ // TODO: Throw an IllegalMonitorStateException ?
+ TEVENT (Exit - Throw IMSX) ;
+ assert(false, "Non-balanced monitor enter/exit!");
+ if (false) {
+ THROW(vmSymbols::java_lang_IllegalMonitorStateException());
+ }
+ return;
+ }
+ }
+
+ if (_recursions != 0) {
+ _recursions--; // this is simple recursive enter
+ TEVENT (Inflated exit - recursive) ;
+ return ;
+ }
+
+ // Invariant: after setting Responsible=null an thread must execute
+ // a MEMBAR or other serializing instruction before fetching EntryList|cxq.
+ if ((SyncFlags & 4) == 0) {
+ _Responsible = NULL ;
+ }
+
+ for (;;) {
+ assert (THREAD == _owner, "invariant") ;
+
+
+ if (Knob_ExitPolicy == 0) {
+ // release semantics: prior loads and stores from within the critical section
+ // must not float (reorder) past the following store that drops the lock.
+ // On SPARC that requires MEMBAR #loadstore|#storestore.
+ // But of course in TSO #loadstore|#storestore is not required.
+ // I'd like to write one of the following:
+ // A. OrderAccess::release() ; _owner = NULL
+ // B. OrderAccess::loadstore(); OrderAccess::storestore(); _owner = NULL;
+ // Unfortunately OrderAccess::release() and OrderAccess::loadstore() both
+ // store into a _dummy variable. That store is not needed, but can result
+ // in massive wasteful coherency traffic on classic SMP systems.
+ // Instead, I use release_store(), which is implemented as just a simple
+ // ST on x64, x86 and SPARC.
+ OrderAccess::release_store_ptr (&_owner, NULL) ; // drop the lock
+ OrderAccess::storeload() ; // See if we need to wake a successor
+ if ((intptr_t(_EntryList)|intptr_t(_cxq)) == 0 || _succ != NULL) {
+ TEVENT (Inflated exit - simple egress) ;
+ return ;
+ }
+ TEVENT (Inflated exit - complex egress) ;
+
+ // Normally the exiting thread is responsible for ensuring succession,
+ // but if other successors are ready or other entering threads are spinning
+ // then this thread can simply store NULL into _owner and exit without
+ // waking a successor. The existence of spinners or ready successors
+ // guarantees proper succession (liveness). Responsibility passes to the
+ // ready or running successors. The exiting thread delegates the duty.
+ // More precisely, if a successor already exists this thread is absolved
+ // of the responsibility of waking (unparking) one.
+ //
+ // The _succ variable is critical to reducing futile wakeup frequency.
+ // _succ identifies the "heir presumptive" thread that has been made
+ // ready (unparked) but that has not yet run. We need only one such
+ // successor thread to guarantee progress.
+ // See http://www.usenix.org/events/jvm01/full_papers/dice/dice.pdf
+ // section 3.3 "Futile Wakeup Throttling" for details.
+ //
+ // Note that spinners in Enter() also set _succ non-null.
+ // In the current implementation spinners opportunistically set
+ // _succ so that exiting threads might avoid waking a successor.
+ // Another less appealing alternative would be for the exiting thread
+ // to drop the lock and then spin briefly to see if a spinner managed
+ // to acquire the lock. If so, the exiting thread could exit
+ // immediately without waking a successor, otherwise the exiting
+ // thread would need to dequeue and wake a successor.
+ // (Note that we'd need to make the post-drop spin short, but no
+ // shorter than the worst-case round-trip cache-line migration time.
+ // The dropped lock needs to become visible to the spinner, and then
+ // the acquisition of the lock by the spinner must become visible to
+ // the exiting thread).
+ //
+
+ // It appears that an heir-presumptive (successor) must be made ready.
+ // Only the current lock owner can manipulate the EntryList or
+ // drain _cxq, so we need to reacquire the lock. If we fail
+ // to reacquire the lock the responsibility for ensuring succession
+ // falls to the new owner.
+ //
+ if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
+ return ;
+ }
+ TEVENT (Exit - Reacquired) ;
+ } else {
+ if ((intptr_t(_EntryList)|intptr_t(_cxq)) == 0 || _succ != NULL) {
+ OrderAccess::release_store_ptr (&_owner, NULL) ; // drop the lock
+ OrderAccess::storeload() ;
+ // Ratify the previously observed values.
+ if (_cxq == NULL || _succ != NULL) {
+ TEVENT (Inflated exit - simple egress) ;
+ return ;
+ }
+
+ // inopportune interleaving -- the exiting thread (this thread)
+ // in the fast-exit path raced an entering thread in the slow-enter
+ // path.
+ // We have two choices:
+ // A. Try to reacquire the lock.
+ // If the CAS() fails return immediately, otherwise
+ // we either restart/rerun the exit operation, or simply
+ // fall-through into the code below which wakes a successor.
+ // B. If the elements forming the EntryList|cxq are TSM
+ // we could simply unpark() the lead thread and return
+ // without having set _succ.
+ if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
+ TEVENT (Inflated exit - reacquired succeeded) ;
+ return ;
+ }
+ TEVENT (Inflated exit - reacquired failed) ;
+ } else {
+ TEVENT (Inflated exit - complex egress) ;
+ }
+ }
+
+ guarantee (_owner == THREAD, "invariant") ;
+
+ ObjectWaiter * w = NULL ;
+ int QMode = Knob_QMode ;
+
+ if (QMode == 2 && _cxq != NULL) {
+ // QMode == 2 : cxq has precedence over EntryList.
+ // Try to directly wake a successor from the cxq.
+ // If successful, the successor will need to unlink itself from cxq.
+ w = _cxq ;
+ assert (w != NULL, "invariant") ;
+ assert (w->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
+ ExitEpilog (Self, w) ;
+ return ;
+ }
+
+ if (QMode == 3 && _cxq != NULL) {
+ // Aggressively drain cxq into EntryList at the first opportunity.
+ // This policy ensure that recently-run threads live at the head of EntryList.
+ // Drain _cxq into EntryList - bulk transfer.
+ // First, detach _cxq.
+ // The following loop is tantamount to: w = swap (&cxq, NULL)
+ w = _cxq ;
+ for (;;) {
+ assert (w != NULL, "Invariant") ;
+ ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
+ if (u == w) break ;
+ w = u ;
+ }
+ assert (w != NULL , "invariant") ;
+
+ ObjectWaiter * q = NULL ;
+ ObjectWaiter * p ;
+ for (p = w ; p != NULL ; p = p->_next) {
+ guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
+ p->TState = ObjectWaiter::TS_ENTER ;
+ p->_prev = q ;
+ q = p ;
+ }
+
+ // Append the RATs to the EntryList
+ // TODO: organize EntryList as a CDLL so we can locate the tail in constant-time.
+ ObjectWaiter * Tail ;
+ for (Tail = _EntryList ; Tail != NULL && Tail->_next != NULL ; Tail = Tail->_next) ;
+ if (Tail == NULL) {
+ _EntryList = w ;
+ } else {
+ Tail->_next = w ;
+ w->_prev = Tail ;
+ }
+
+ // Fall thru into code that tries to wake a successor from EntryList
+ }
+
+ if (QMode == 4 && _cxq != NULL) {
+ // Aggressively drain cxq into EntryList at the first opportunity.
+ // This policy ensure that recently-run threads live at the head of EntryList.
+
+ // Drain _cxq into EntryList - bulk transfer.
+ // First, detach _cxq.
+ // The following loop is tantamount to: w = swap (&cxq, NULL)
+ w = _cxq ;
+ for (;;) {
+ assert (w != NULL, "Invariant") ;
+ ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
+ if (u == w) break ;
+ w = u ;
+ }
+ assert (w != NULL , "invariant") ;
+
+ ObjectWaiter * q = NULL ;
+ ObjectWaiter * p ;
+ for (p = w ; p != NULL ; p = p->_next) {
+ guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
+ p->TState = ObjectWaiter::TS_ENTER ;
+ p->_prev = q ;
+ q = p ;
+ }
+
+ // Prepend the RATs to the EntryList
+ if (_EntryList != NULL) {
+ q->_next = _EntryList ;
+ _EntryList->_prev = q ;
+ }
+ _EntryList = w ;
+
+ // Fall thru into code that tries to wake a successor from EntryList
+ }
+
+ w = _EntryList ;
+ if (w != NULL) {
+ // I'd like to write: guarantee (w->_thread != Self).
+ // But in practice an exiting thread may find itself on the EntryList.
+ // Lets say thread T1 calls O.wait(). Wait() enqueues T1 on O's waitset and
+ // then calls exit(). Exit release the lock by setting O._owner to NULL.
+ // Lets say T1 then stalls. T2 acquires O and calls O.notify(). The
+ // notify() operation moves T1 from O's waitset to O's EntryList. T2 then
+ // release the lock "O". T2 resumes immediately after the ST of null into
+ // _owner, above. T2 notices that the EntryList is populated, so it
+ // reacquires the lock and then finds itself on the EntryList.
+ // Given all that, we have to tolerate the circumstance where "w" is
+ // associated with Self.
+ assert (w->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ ExitEpilog (Self, w) ;
+ return ;
+ }
+
+ // If we find that both _cxq and EntryList are null then just
+ // re-run the exit protocol from the top.
+ w = _cxq ;
+ if (w == NULL) continue ;
+
+ // Drain _cxq into EntryList - bulk transfer.
+ // First, detach _cxq.
+ // The following loop is tantamount to: w = swap (&cxq, NULL)
+ for (;;) {
+ assert (w != NULL, "Invariant") ;
+ ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
+ if (u == w) break ;
+ w = u ;
+ }
+ TEVENT (Inflated exit - drain cxq into EntryList) ;
+
+ assert (w != NULL , "invariant") ;
+ assert (_EntryList == NULL , "invariant") ;
+
+ // Convert the LIFO SLL anchored by _cxq into a DLL.
+ // The list reorganization step operates in O(LENGTH(w)) time.
+ // It's critical that this step operate quickly as
+ // "Self" still holds the outer-lock, restricting parallelism
+ // and effectively lengthening the critical section.
+ // Invariant: s chases t chases u.
+ // TODO-FIXME: consider changing EntryList from a DLL to a CDLL so
+ // we have faster access to the tail.
+
+ if (QMode == 1) {
+ // QMode == 1 : drain cxq to EntryList, reversing order
+ // We also reverse the order of the list.
+ ObjectWaiter * s = NULL ;
+ ObjectWaiter * t = w ;
+ ObjectWaiter * u = NULL ;
+ while (t != NULL) {
+ guarantee (t->TState == ObjectWaiter::TS_CXQ, "invariant") ;
+ t->TState = ObjectWaiter::TS_ENTER ;
+ u = t->_next ;
+ t->_prev = u ;
+ t->_next = s ;
+ s = t;
+ t = u ;
+ }
+ _EntryList = s ;
+ assert (s != NULL, "invariant") ;
+ } else {
+ // QMode == 0 or QMode == 2
+ _EntryList = w ;
+ ObjectWaiter * q = NULL ;
+ ObjectWaiter * p ;
+ for (p = w ; p != NULL ; p = p->_next) {
+ guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
+ p->TState = ObjectWaiter::TS_ENTER ;
+ p->_prev = q ;
+ q = p ;
+ }
+ }
+
+ // In 1-0 mode we need: ST EntryList; MEMBAR #storestore; ST _owner = NULL
+ // The MEMBAR is satisfied by the release_store() operation in ExitEpilog().
+
+ // See if we can abdicate to a spinner instead of waking a thread.
+ // A primary goal of the implementation is to reduce the
+ // context-switch rate.
+ if (_succ != NULL) continue;
+
+ w = _EntryList ;
+ if (w != NULL) {
+ guarantee (w->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ ExitEpilog (Self, w) ;
+ return ;
+ }
+ }
+}
+
+// ExitSuspendEquivalent:
+// A faster alternate to handle_special_suspend_equivalent_condition()
+//
+// handle_special_suspend_equivalent_condition() unconditionally
+// acquires the SR_lock. On some platforms uncontended MutexLocker()
+// operations have high latency. Note that in ::enter() we call HSSEC
+// while holding the monitor, so we effectively lengthen the critical sections.
+//
+// There are a number of possible solutions:
+//
+// A. To ameliorate the problem we might also defer state transitions
+// to as late as possible -- just prior to parking.
+// Given that, we'd call HSSEC after having returned from park(),
+// but before attempting to acquire the monitor. This is only a
+// partial solution. It avoids calling HSSEC while holding the
+// monitor (good), but it still increases successor reacquisition latency --
+// the interval between unparking a successor and the time the successor
+// resumes and retries the lock. See ReenterI(), which defers state transitions.
+// If we use this technique we can also avoid EnterI()-exit() loop
+// in ::enter() where we iteratively drop the lock and then attempt
+// to reacquire it after suspending.
+//
+// B. In the future we might fold all the suspend bits into a
+// composite per-thread suspend flag and then update it with CAS().
+// Alternately, a Dekker-like mechanism with multiple variables
+// would suffice:
+// ST Self->_suspend_equivalent = false
+// MEMBAR
+// LD Self_>_suspend_flags
+//
+
+
+bool ObjectMonitor::ExitSuspendEquivalent (JavaThread * jSelf) {
+ int Mode = Knob_FastHSSEC ;
+ if (Mode && !jSelf->is_external_suspend()) {
+ assert (jSelf->is_suspend_equivalent(), "invariant") ;
+ jSelf->clear_suspend_equivalent() ;
+ if (2 == Mode) OrderAccess::storeload() ;
+ if (!jSelf->is_external_suspend()) return false ;
+ // We raced a suspension -- fall thru into the slow path
+ TEVENT (ExitSuspendEquivalent - raced) ;
+ jSelf->set_suspend_equivalent() ;
+ }
+ return jSelf->handle_special_suspend_equivalent_condition() ;
+}
+
+
+void ObjectMonitor::ExitEpilog (Thread * Self, ObjectWaiter * Wakee) {
+ assert (_owner == Self, "invariant") ;
+
+ // Exit protocol:
+ // 1. ST _succ = wakee
+ // 2. membar #loadstore|#storestore;
+ // 2. ST _owner = NULL
+ // 3. unpark(wakee)
+
+ _succ = Knob_SuccEnabled ? Wakee->_thread : NULL ;
+ ParkEvent * Trigger = Wakee->_event ;
+
+ // Hygiene -- once we've set _owner = NULL we can't safely dereference Wakee again.
+ // The thread associated with Wakee may have grabbed the lock and "Wakee" may be
+ // out-of-scope (non-extant).
+ Wakee = NULL ;
+
+ // Drop the lock
+ OrderAccess::release_store_ptr (&_owner, NULL) ;
+ OrderAccess::fence() ; // ST _owner vs LD in unpark()
+
+ if (SafepointSynchronize::do_call_back()) {
+ TEVENT (unpark before SAFEPOINT) ;
+ }
+
+ DTRACE_MONITOR_PROBE(contended__exit, this, object(), Self);
+ Trigger->unpark() ;
+
+ // Maintain stats and report events to JVMTI
+ if (ObjectMonitor::_sync_Parks != NULL) {
+ ObjectMonitor::_sync_Parks->inc() ;
+ }
+}
+
+
+// -----------------------------------------------------------------------------
+// Class Loader deadlock handling.
+//
+// complete_exit exits a lock returning recursion count
+// complete_exit/reenter operate as a wait without waiting
+// complete_exit requires an inflated monitor
+// The _owner field is not always the Thread addr even with an
+// inflated monitor, e.g. the monitor can be inflated by a non-owning
+// thread due to contention.
+intptr_t ObjectMonitor::complete_exit(TRAPS) {
+ Thread * const Self = THREAD;
+ assert(Self->is_Java_thread(), "Must be Java thread!");
+ JavaThread *jt = (JavaThread *)THREAD;
+
+ DeferredInitialize();
+
+ if (THREAD != _owner) {
+ if (THREAD->is_lock_owned ((address)_owner)) {
+ assert(_recursions == 0, "internal state error");
+ _owner = THREAD ; /* Convert from basiclock addr to Thread addr */
+ _recursions = 0 ;
+ OwnerIsThread = 1 ;
+ }
+ }
+
+ guarantee(Self == _owner, "complete_exit not owner");
+ intptr_t save = _recursions; // record the old recursion count
+ _recursions = 0; // set the recursion level to be 0
+ exit (Self) ; // exit the monitor
+ guarantee (_owner != Self, "invariant");
+ return save;
+}
+
+// reenter() enters a lock and sets recursion count
+// complete_exit/reenter operate as a wait without waiting
+void ObjectMonitor::reenter(intptr_t recursions, TRAPS) {
+ Thread * const Self = THREAD;
+ assert(Self->is_Java_thread(), "Must be Java thread!");
+ JavaThread *jt = (JavaThread *)THREAD;
+
+ guarantee(_owner != Self, "reenter already owner");
+ enter (THREAD); // enter the monitor
+ guarantee (_recursions == 0, "reenter recursion");
+ _recursions = recursions;
+ return;
+}
+
+
+// -----------------------------------------------------------------------------
+// A macro is used below because there may already be a pending
+// exception which should not abort the execution of the routines
+// which use this (which is why we don't put this into check_slow and
+// call it with a CHECK argument).
+
+#define CHECK_OWNER() \
+ do { \
+ if (THREAD != _owner) { \
+ if (THREAD->is_lock_owned((address) _owner)) { \
+ _owner = THREAD ; /* Convert from basiclock addr to Thread addr */ \
+ _recursions = 0; \
+ OwnerIsThread = 1 ; \
+ } else { \
+ TEVENT (Throw IMSX) ; \
+ THROW(vmSymbols::java_lang_IllegalMonitorStateException()); \
+ } \
+ } \
+ } while (false)
+
+// check_slow() is a misnomer. It's called to simply to throw an IMSX exception.
+// TODO-FIXME: remove check_slow() -- it's likely dead.
+
+void ObjectMonitor::check_slow(TRAPS) {
+ TEVENT (check_slow - throw IMSX) ;
+ assert(THREAD != _owner && !THREAD->is_lock_owned((address) _owner), "must not be owner");
+ THROW_MSG(vmSymbols::java_lang_IllegalMonitorStateException(), "current thread not owner");
+}
+
+static int Adjust (volatile int * adr, int dx) {
+ int v ;
+ for (v = *adr ; Atomic::cmpxchg (v + dx, adr, v) != v; v = *adr) ;
+ return v ;
+}
+// -----------------------------------------------------------------------------
+// Wait/Notify/NotifyAll
+//
+// Note: a subset of changes to ObjectMonitor::wait()
+// will need to be replicated in complete_exit above
+void ObjectMonitor::wait(jlong millis, bool interruptible, TRAPS) {
+ Thread * const Self = THREAD ;
+ assert(Self->is_Java_thread(), "Must be Java thread!");
+ JavaThread *jt = (JavaThread *)THREAD;
+
+ DeferredInitialize () ;
+
+ // Throw IMSX or IEX.
+ CHECK_OWNER();
+
+ // check for a pending interrupt
+ if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
+ // post monitor waited event. Note that this is past-tense, we are done waiting.
+ if (JvmtiExport::should_post_monitor_waited()) {
+ // Note: 'false' parameter is passed here because the
+ // wait was not timed out due to thread interrupt.
+ JvmtiExport::post_monitor_waited(jt, this, false);
+ }
+ TEVENT (Wait - Throw IEX) ;
+ THROW(vmSymbols::java_lang_InterruptedException());
+ return ;
+ }
+ TEVENT (Wait) ;
+
+ assert (Self->_Stalled == 0, "invariant") ;
+ Self->_Stalled = intptr_t(this) ;
+ jt->set_current_waiting_monitor(this);
+
+ // create a node to be put into the queue
+ // Critically, after we reset() the event but prior to park(), we must check
+ // for a pending interrupt.
+ ObjectWaiter node(Self);
+ node.TState = ObjectWaiter::TS_WAIT ;
+ Self->_ParkEvent->reset() ;
+ OrderAccess::fence(); // ST into Event; membar ; LD interrupted-flag
+
+ // Enter the waiting queue, which is a circular doubly linked list in this case
+ // but it could be a priority queue or any data structure.
+ // _WaitSetLock protects the wait queue. Normally the wait queue is accessed only
+ // by the the owner of the monitor *except* in the case where park()
+ // returns because of a timeout of interrupt. Contention is exceptionally rare
+ // so we use a simple spin-lock instead of a heavier-weight blocking lock.
+
+ Thread::SpinAcquire (&_WaitSetLock, "WaitSet - add") ;
+ AddWaiter (&node) ;
+ Thread::SpinRelease (&_WaitSetLock) ;
+
+ if ((SyncFlags & 4) == 0) {
+ _Responsible = NULL ;
+ }
+ intptr_t save = _recursions; // record the old recursion count
+ _waiters++; // increment the number of waiters
+ _recursions = 0; // set the recursion level to be 1
+ exit (Self) ; // exit the monitor
+ guarantee (_owner != Self, "invariant") ;
+
+ // As soon as the ObjectMonitor's ownership is dropped in the exit()
+ // call above, another thread can enter() the ObjectMonitor, do the
+ // notify(), and exit() the ObjectMonitor. If the other thread's
+ // exit() call chooses this thread as the successor and the unpark()
+ // call happens to occur while this thread is posting a
+ // MONITOR_CONTENDED_EXIT event, then we run the risk of the event
+ // handler using RawMonitors and consuming the unpark().
+ //
+ // To avoid the problem, we re-post the event. This does no harm
+ // even if the original unpark() was not consumed because we are the
+ // chosen successor for this monitor.
+ if (node._notified != 0 && _succ == Self) {
+ node._event->unpark();
+ }
+
+ // The thread is on the WaitSet list - now park() it.
+ // On MP systems it's conceivable that a brief spin before we park
+ // could be profitable.
+ //
+ // TODO-FIXME: change the following logic to a loop of the form
+ // while (!timeout && !interrupted && _notified == 0) park()
+
+ int ret = OS_OK ;
+ int WasNotified = 0 ;
+ { // State transition wrappers
+ OSThread* osthread = Self->osthread();
+ OSThreadWaitState osts(osthread, true);
+ {
+ ThreadBlockInVM tbivm(jt);
+ // Thread is in thread_blocked state and oop access is unsafe.
+ jt->set_suspend_equivalent();
+
+ if (interruptible && (Thread::is_interrupted(THREAD, false) || HAS_PENDING_EXCEPTION)) {
+ // Intentionally empty
+ } else
+ if (node._notified == 0) {
+ if (millis <= 0) {
+ Self->_ParkEvent->park () ;
+ } else {
+ ret = Self->_ParkEvent->park (millis) ;
+ }
+ }
+
+ // were we externally suspended while we were waiting?
+ if (ExitSuspendEquivalent (jt)) {
+ // TODO-FIXME: add -- if succ == Self then succ = null.
+ jt->java_suspend_self();
+ }
+
+ } // Exit thread safepoint: transition _thread_blocked -> _thread_in_vm
+
+
+ // Node may be on the WaitSet, the EntryList (or cxq), or in transition
+ // from the WaitSet to the EntryList.
+ // See if we need to remove Node from the WaitSet.
+ // We use double-checked locking to avoid grabbing _WaitSetLock
+ // if the thread is not on the wait queue.
+ //
+ // Note that we don't need a fence before the fetch of TState.
+ // In the worst case we'll fetch a old-stale value of TS_WAIT previously
+ // written by the is thread. (perhaps the fetch might even be satisfied
+ // by a look-aside into the processor's own store buffer, although given
+ // the length of the code path between the prior ST and this load that's
+ // highly unlikely). If the following LD fetches a stale TS_WAIT value
+ // then we'll acquire the lock and then re-fetch a fresh TState value.
+ // That is, we fail toward safety.
+
+ if (node.TState == ObjectWaiter::TS_WAIT) {
+ Thread::SpinAcquire (&_WaitSetLock, "WaitSet - unlink") ;
+ if (node.TState == ObjectWaiter::TS_WAIT) {
+ DequeueSpecificWaiter (&node) ; // unlink from WaitSet
+ assert(node._notified == 0, "invariant");
+ node.TState = ObjectWaiter::TS_RUN ;
+ }
+ Thread::SpinRelease (&_WaitSetLock) ;
+ }
+
+ // The thread is now either on off-list (TS_RUN),
+ // on the EntryList (TS_ENTER), or on the cxq (TS_CXQ).
+ // The Node's TState variable is stable from the perspective of this thread.
+ // No other threads will asynchronously modify TState.
+ guarantee (node.TState != ObjectWaiter::TS_WAIT, "invariant") ;
+ OrderAccess::loadload() ;
+ if (_succ == Self) _succ = NULL ;
+ WasNotified = node._notified ;
+
+ // Reentry phase -- reacquire the monitor.
+ // re-enter contended monitor after object.wait().
+ // retain OBJECT_WAIT state until re-enter successfully completes
+ // Thread state is thread_in_vm and oop access is again safe,
+ // although the raw address of the object may have changed.
+ // (Don't cache naked oops over safepoints, of course).
+
+ // post monitor waited event. Note that this is past-tense, we are done waiting.
+ if (JvmtiExport::should_post_monitor_waited()) {
+ JvmtiExport::post_monitor_waited(jt, this, ret == OS_TIMEOUT);
+ }
+ OrderAccess::fence() ;
+
+ assert (Self->_Stalled != 0, "invariant") ;
+ Self->_Stalled = 0 ;
+
+ assert (_owner != Self, "invariant") ;
+ ObjectWaiter::TStates v = node.TState ;
+ if (v == ObjectWaiter::TS_RUN) {
+ enter (Self) ;
+ } else {
+ guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
+ ReenterI (Self, &node) ;
+ node.wait_reenter_end(this);
+ }
+
+ // Self has reacquired the lock.
+ // Lifecycle - the node representing Self must not appear on any queues.
+ // Node is about to go out-of-scope, but even if it were immortal we wouldn't
+ // want residual elements associated with this thread left on any lists.
+ guarantee (node.TState == ObjectWaiter::TS_RUN, "invariant") ;
+ assert (_owner == Self, "invariant") ;
+ assert (_succ != Self , "invariant") ;
+ } // OSThreadWaitState()
+
+ jt->set_current_waiting_monitor(NULL);
+
+ guarantee (_recursions == 0, "invariant") ;
+ _recursions = save; // restore the old recursion count
+ _waiters--; // decrement the number of waiters
+
+ // Verify a few postconditions
+ assert (_owner == Self , "invariant") ;
+ assert (_succ != Self , "invariant") ;
+ assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
+
+ if (SyncFlags & 32) {
+ OrderAccess::fence() ;
+ }
+
+ // check if the notification happened
+ if (!WasNotified) {
+ // no, it could be timeout or Thread.interrupt() or both
+ // check for interrupt event, otherwise it is timeout
+ if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
+ TEVENT (Wait - throw IEX from epilog) ;
+ THROW(vmSymbols::java_lang_InterruptedException());
+ }
+ }
+
+ // NOTE: Spurious wake up will be consider as timeout.
+ // Monitor notify has precedence over thread interrupt.
+}
+
+
+// Consider:
+// If the lock is cool (cxq == null && succ == null) and we're on an MP system
+// then instead of transferring a thread from the WaitSet to the EntryList
+// we might just dequeue a thread from the WaitSet and directly unpark() it.
+
+void ObjectMonitor::notify(TRAPS) {
+ CHECK_OWNER();
+ if (_WaitSet == NULL) {
+ TEVENT (Empty-Notify) ;
+ return ;
+ }
+ DTRACE_MONITOR_PROBE(notify, this, object(), THREAD);
+
+ int Policy = Knob_MoveNotifyee ;
+
+ Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notify") ;
+ ObjectWaiter * iterator = DequeueWaiter() ;
+ if (iterator != NULL) {
+ TEVENT (Notify1 - Transfer) ;
+ guarantee (iterator->TState == ObjectWaiter::TS_WAIT, "invariant") ;
+ guarantee (iterator->_notified == 0, "invariant") ;
+ if (Policy != 4) {
+ iterator->TState = ObjectWaiter::TS_ENTER ;
+ }
+ iterator->_notified = 1 ;
+
+ ObjectWaiter * List = _EntryList ;
+ if (List != NULL) {
+ assert (List->_prev == NULL, "invariant") ;
+ assert (List->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ assert (List != iterator, "invariant") ;
+ }
+
+ if (Policy == 0) { // prepend to EntryList
+ if (List == NULL) {
+ iterator->_next = iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ } else {
+ List->_prev = iterator ;
+ iterator->_next = List ;
+ iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ }
+ } else
+ if (Policy == 1) { // append to EntryList
+ if (List == NULL) {
+ iterator->_next = iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ } else {
+ // CONSIDER: finding the tail currently requires a linear-time walk of
+ // the EntryList. We can make tail access constant-time by converting to
+ // a CDLL instead of using our current DLL.
+ ObjectWaiter * Tail ;
+ for (Tail = List ; Tail->_next != NULL ; Tail = Tail->_next) ;
+ assert (Tail != NULL && Tail->_next == NULL, "invariant") ;
+ Tail->_next = iterator ;
+ iterator->_prev = Tail ;
+ iterator->_next = NULL ;
+ }
+ } else
+ if (Policy == 2) { // prepend to cxq
+ // prepend to cxq
+ if (List == NULL) {
+ iterator->_next = iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ } else {
+ iterator->TState = ObjectWaiter::TS_CXQ ;
+ for (;;) {
+ ObjectWaiter * Front = _cxq ;
+ iterator->_next = Front ;
+ if (Atomic::cmpxchg_ptr (iterator, &_cxq, Front) == Front) {
+ break ;
+ }
+ }
+ }
+ } else
+ if (Policy == 3) { // append to cxq
+ iterator->TState = ObjectWaiter::TS_CXQ ;
+ for (;;) {
+ ObjectWaiter * Tail ;
+ Tail = _cxq ;
+ if (Tail == NULL) {
+ iterator->_next = NULL ;
+ if (Atomic::cmpxchg_ptr (iterator, &_cxq, NULL) == NULL) {
+ break ;
+ }
+ } else {
+ while (Tail->_next != NULL) Tail = Tail->_next ;
+ Tail->_next = iterator ;
+ iterator->_prev = Tail ;
+ iterator->_next = NULL ;
+ break ;
+ }
+ }
+ } else {
+ ParkEvent * ev = iterator->_event ;
+ iterator->TState = ObjectWaiter::TS_RUN ;
+ OrderAccess::fence() ;
+ ev->unpark() ;
+ }
+
+ if (Policy < 4) {
+ iterator->wait_reenter_begin(this);
+ }
+
+ // _WaitSetLock protects the wait queue, not the EntryList. We could
+ // move the add-to-EntryList operation, above, outside the critical section
+ // protected by _WaitSetLock. In practice that's not useful. With the
+ // exception of wait() timeouts and interrupts the monitor owner
+ // is the only thread that grabs _WaitSetLock. There's almost no contention
+ // on _WaitSetLock so it's not profitable to reduce the length of the
+ // critical section.
+ }
+
+ Thread::SpinRelease (&_WaitSetLock) ;
+
+ if (iterator != NULL && ObjectMonitor::_sync_Notifications != NULL) {
+ ObjectMonitor::_sync_Notifications->inc() ;
+ }
+}
+
+
+void ObjectMonitor::notifyAll(TRAPS) {
+ CHECK_OWNER();
+ ObjectWaiter* iterator;
+ if (_WaitSet == NULL) {
+ TEVENT (Empty-NotifyAll) ;
+ return ;
+ }
+ DTRACE_MONITOR_PROBE(notifyAll, this, object(), THREAD);
+
+ int Policy = Knob_MoveNotifyee ;
+ int Tally = 0 ;
+ Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notifyall") ;
+
+ for (;;) {
+ iterator = DequeueWaiter () ;
+ if (iterator == NULL) break ;
+ TEVENT (NotifyAll - Transfer1) ;
+ ++Tally ;
+
+ // Disposition - what might we do with iterator ?
+ // a. add it directly to the EntryList - either tail or head.
+ // b. push it onto the front of the _cxq.
+ // For now we use (a).
+
+ guarantee (iterator->TState == ObjectWaiter::TS_WAIT, "invariant") ;
+ guarantee (iterator->_notified == 0, "invariant") ;
+ iterator->_notified = 1 ;
+ if (Policy != 4) {
+ iterator->TState = ObjectWaiter::TS_ENTER ;
+ }
+
+ ObjectWaiter * List = _EntryList ;
+ if (List != NULL) {
+ assert (List->_prev == NULL, "invariant") ;
+ assert (List->TState == ObjectWaiter::TS_ENTER, "invariant") ;
+ assert (List != iterator, "invariant") ;
+ }
+
+ if (Policy == 0) { // prepend to EntryList
+ if (List == NULL) {
+ iterator->_next = iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ } else {
+ List->_prev = iterator ;
+ iterator->_next = List ;
+ iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ }
+ } else
+ if (Policy == 1) { // append to EntryList
+ if (List == NULL) {
+ iterator->_next = iterator->_prev = NULL ;
+ _EntryList = iterator ;
+ } else {
+ // CONSIDER: finding the tail currently requires a linear-time walk of
+ // the EntryList. We can make tail access constant-time by converting to
+ // a CDLL instead of using our current DLL.
+ ObjectWaiter * Tail ;
+ for (Tail = List ; Tail->_next != NULL ; Tail = Tail->_next) ;
+ assert (Tail != NULL && Tail->_next == NULL, "invariant") ;
+ Tail->_next = iterator ;
+ iterator->_prev = Tail ;
+ iterator->_next = NULL ;
+ }
+ } else
+ if (Policy == 2) { // prepend to cxq
+ // prepend to cxq
+ iterator->TState = ObjectWaiter::TS_CXQ ;
+ for (;;) {
+ ObjectWaiter * Front = _cxq ;
+ iterator->_next = Front ;
+ if (Atomic::cmpxchg_ptr (iterator, &_cxq, Front) == Front) {
+ break ;
+ }
+ }
+ } else
+ if (Policy == 3) { // append to cxq
+ iterator->TState = ObjectWaiter::TS_CXQ ;
+ for (;;) {
+ ObjectWaiter * Tail ;
+ Tail = _cxq ;
+ if (Tail == NULL) {
+ iterator->_next = NULL ;
+ if (Atomic::cmpxchg_ptr (iterator, &_cxq, NULL) == NULL) {
+ break ;
+ }
+ } else {
+ while (Tail->_next != NULL) Tail = Tail->_next ;
+ Tail->_next = iterator ;
+ iterator->_prev = Tail ;
+ iterator->_next = NULL ;
+ break ;
+ }
+ }
+ } else {
+ ParkEvent * ev = iterator->_event ;
+ iterator->TState = ObjectWaiter::TS_RUN ;
+ OrderAccess::fence() ;
+ ev->unpark() ;
+ }
+
+ if (Policy < 4) {
+ iterator->wait_reenter_begin(this);
+ }
+
+ // _WaitSetLock protects the wait queue, not the EntryList. We could
+ // move the add-to-EntryList operation, above, outside the critical section
+ // protected by _WaitSetLock. In practice that's not useful. With the
+ // exception of wait() timeouts and interrupts the monitor owner
+ // is the only thread that grabs _WaitSetLock. There's almost no contention
+ // on _WaitSetLock so it's not profitable to reduce the length of the
+ // critical section.
+ }
+
+ Thread::SpinRelease (&_WaitSetLock) ;
+
+ if (Tally != 0 && ObjectMonitor::_sync_Notifications != NULL) {
+ ObjectMonitor::_sync_Notifications->inc(Tally) ;
+ }
+}
+
+// -----------------------------------------------------------------------------
+// Adaptive Spinning Support
+//
+// Adaptive spin-then-block - rational spinning
+//
+// Note that we spin "globally" on _owner with a classic SMP-polite TATAS
+// algorithm. On high order SMP systems it would be better to start with
+// a brief global spin and then revert to spinning locally. In the spirit of MCS/CLH,
+// a contending thread could enqueue itself on the cxq and then spin locally
+// on a thread-specific variable such as its ParkEvent._Event flag.
+// That's left as an exercise for the reader. Note that global spinning is
+// not problematic on Niagara, as the L2$ serves the interconnect and has both
+// low latency and massive bandwidth.
+//
+// Broadly, we can fix the spin frequency -- that is, the % of contended lock
+// acquisition attempts where we opt to spin -- at 100% and vary the spin count
+// (duration) or we can fix the count at approximately the duration of
+// a context switch and vary the frequency. Of course we could also
+// vary both satisfying K == Frequency * Duration, where K is adaptive by monitor.
+// See http://j2se.east/~dice/PERSIST/040824-AdaptiveSpinning.html.
+//
+// This implementation varies the duration "D", where D varies with
+// the success rate of recent spin attempts. (D is capped at approximately
+// length of a round-trip context switch). The success rate for recent
+// spin attempts is a good predictor of the success rate of future spin
+// attempts. The mechanism adapts automatically to varying critical
+// section length (lock modality), system load and degree of parallelism.
+// D is maintained per-monitor in _SpinDuration and is initialized
+// optimistically. Spin frequency is fixed at 100%.
+//
+// Note that _SpinDuration is volatile, but we update it without locks
+// or atomics. The code is designed so that _SpinDuration stays within
+// a reasonable range even in the presence of races. The arithmetic
+// operations on _SpinDuration are closed over the domain of legal values,
+// so at worst a race will install and older but still legal value.
+// At the very worst this introduces some apparent non-determinism.
+// We might spin when we shouldn't or vice-versa, but since the spin
+// count are relatively short, even in the worst case, the effect is harmless.
+//
+// Care must be taken that a low "D" value does not become an
+// an absorbing state. Transient spinning failures -- when spinning
+// is overall profitable -- should not cause the system to converge
+// on low "D" values. We want spinning to be stable and predictable
+// and fairly responsive to change and at the same time we don't want
+// it to oscillate, become metastable, be "too" non-deterministic,
+// or converge on or enter undesirable stable absorbing states.
+//
+// We implement a feedback-based control system -- using past behavior
+// to predict future behavior. We face two issues: (a) if the
+// input signal is random then the spin predictor won't provide optimal
+// results, and (b) if the signal frequency is too high then the control
+// system, which has some natural response lag, will "chase" the signal.
+// (b) can arise from multimodal lock hold times. Transient preemption
+// can also result in apparent bimodal lock hold times.
+// Although sub-optimal, neither condition is particularly harmful, as
+// in the worst-case we'll spin when we shouldn't or vice-versa.
+// The maximum spin duration is rather short so the failure modes aren't bad.
+// To be conservative, I've tuned the gain in system to bias toward
+// _not spinning. Relatedly, the system can sometimes enter a mode where it
+// "rings" or oscillates between spinning and not spinning. This happens
+// when spinning is just on the cusp of profitability, however, so the
+// situation is not dire. The state is benign -- there's no need to add
+// hysteresis control to damp the transition rate between spinning and
+// not spinning.
+//
+
+intptr_t ObjectMonitor::SpinCallbackArgument = 0 ;
+int (*ObjectMonitor::SpinCallbackFunction)(intptr_t, int) = NULL ;
+
+// Spinning: Fixed frequency (100%), vary duration
+
+
+int ObjectMonitor::TrySpin_VaryDuration (Thread * Self) {
+
+ // Dumb, brutal spin. Good for comparative measurements against adaptive spinning.
+ int ctr = Knob_FixedSpin ;
+ if (ctr != 0) {
+ while (--ctr >= 0) {
+ if (TryLock (Self) > 0) return 1 ;
+ SpinPause () ;
+ }
+ return 0 ;
+ }
+
+ for (ctr = Knob_PreSpin + 1; --ctr >= 0 ; ) {
+ if (TryLock(Self) > 0) {
+ // Increase _SpinDuration ...
+ // Note that we don't clamp SpinDuration precisely at SpinLimit.
+ // Raising _SpurDuration to the poverty line is key.
+ int x = _SpinDuration ;
+ if (x < Knob_SpinLimit) {
+ if (x < Knob_Poverty) x = Knob_Poverty ;
+ _SpinDuration = x + Knob_BonusB ;
+ }
+ return 1 ;
+ }
+ SpinPause () ;
+ }
+
+ // Admission control - verify preconditions for spinning
+ //
+ // We always spin a little bit, just to prevent _SpinDuration == 0 from
+ // becoming an absorbing state. Put another way, we spin briefly to
+ // sample, just in case the system load, parallelism, contention, or lock
+ // modality changed.
+ //
+ // Consider the following alternative:
+ // Periodically set _SpinDuration = _SpinLimit and try a long/full
+ // spin attempt. "Periodically" might mean after a tally of
+ // the # of failed spin attempts (or iterations) reaches some threshold.
+ // This takes us into the realm of 1-out-of-N spinning, where we
+ // hold the duration constant but vary the frequency.
+
+ ctr = _SpinDuration ;
+ if (ctr < Knob_SpinBase) ctr = Knob_SpinBase ;
+ if (ctr <= 0) return 0 ;
+
+ if (Knob_SuccRestrict && _succ != NULL) return 0 ;
+ if (Knob_OState && NotRunnable (Self, (Thread *) _owner)) {
+ TEVENT (Spin abort - notrunnable [TOP]);
+ return 0 ;
+ }
+
+ int MaxSpin = Knob_MaxSpinners ;
+ if (MaxSpin >= 0) {
+ if (_Spinner > MaxSpin) {
+ TEVENT (Spin abort -- too many spinners) ;
+ return 0 ;
+ }
+ // Slighty racy, but benign ...
+ Adjust (&_Spinner, 1) ;
+ }
+
+ // We're good to spin ... spin ingress.
+ // CONSIDER: use Prefetch::write() to avoid RTS->RTO upgrades
+ // when preparing to LD...CAS _owner, etc and the CAS is likely
+ // to succeed.
+ int hits = 0 ;
+ int msk = 0 ;
+ int caspty = Knob_CASPenalty ;
+ int oxpty = Knob_OXPenalty ;
+ int sss = Knob_SpinSetSucc ;
+ if (sss && _succ == NULL ) _succ = Self ;
+ Thread * prv = NULL ;
+
+ // There are three ways to exit the following loop:
+ // 1. A successful spin where this thread has acquired the lock.
+ // 2. Spin failure with prejudice
+ // 3. Spin failure without prejudice
+
+ while (--ctr >= 0) {
+
+ // Periodic polling -- Check for pending GC
+ // Threads may spin while they're unsafe.
+ // We don't want spinning threads to delay the JVM from reaching
+ // a stop-the-world safepoint or to steal cycles from GC.
+ // If we detect a pending safepoint we abort in order that
+ // (a) this thread, if unsafe, doesn't delay the safepoint, and (b)
+ // this thread, if safe, doesn't steal cycles from GC.
+ // This is in keeping with the "no loitering in runtime" rule.
+ // We periodically check to see if there's a safepoint pending.
+ if ((ctr & 0xFF) == 0) {
+ if (SafepointSynchronize::do_call_back()) {
+ TEVENT (Spin: safepoint) ;
+ goto Abort ; // abrupt spin egress
+ }
+ if (Knob_UsePause & 1) SpinPause () ;
+
+ int (*scb)(intptr_t,int) = SpinCallbackFunction ;
+ if (hits > 50 && scb != NULL) {
+ int abend = (*scb)(SpinCallbackArgument, 0) ;
+ }
+ }
+
+ if (Knob_UsePause & 2) SpinPause() ;
+
+ // Exponential back-off ... Stay off the bus to reduce coherency traffic.
+ // This is useful on classic SMP systems, but is of less utility on
+ // N1-style CMT platforms.
+ //
+ // Trade-off: lock acquisition latency vs coherency bandwidth.
+ // Lock hold times are typically short. A histogram
+ // of successful spin attempts shows that we usually acquire
+ // the lock early in the spin. That suggests we want to
+ // sample _owner frequently in the early phase of the spin,
+ // but then back-off and sample less frequently as the spin
+ // progresses. The back-off makes a good citizen on SMP big
+ // SMP systems. Oversampling _owner can consume excessive
+ // coherency bandwidth. Relatedly, if we _oversample _owner we
+ // can inadvertently interfere with the the ST m->owner=null.
+ // executed by the lock owner.
+ if (ctr & msk) continue ;
+ ++hits ;
+ if ((hits & 0xF) == 0) {
+ // The 0xF, above, corresponds to the exponent.
+ // Consider: (msk+1)|msk
+ msk = ((msk << 2)|3) & BackOffMask ;
+ }
+
+ // Probe _owner with TATAS
+ // If this thread observes the monitor transition or flicker
+ // from locked to unlocked to locked, then the odds that this
+ // thread will acquire the lock in this spin attempt go down
+ // considerably. The same argument applies if the CAS fails
+ // or if we observe _owner change from one non-null value to
+ // another non-null value. In such cases we might abort
+ // the spin without prejudice or apply a "penalty" to the
+ // spin count-down variable "ctr", reducing it by 100, say.
+
+ Thread * ox = (Thread *) _owner ;
+ if (ox == NULL) {
+ ox = (Thread *) Atomic::cmpxchg_ptr (Self, &_owner, NULL) ;
+ if (ox == NULL) {
+ // The CAS succeeded -- this thread acquired ownership
+ // Take care of some bookkeeping to exit spin state.
+ if (sss && _succ == Self) {
+ _succ = NULL ;
+ }
+ if (MaxSpin > 0) Adjust (&_Spinner, -1) ;
+
+ // Increase _SpinDuration :
+ // The spin was successful (profitable) so we tend toward
+ // longer spin attempts in the future.
+ // CONSIDER: factor "ctr" into the _SpinDuration adjustment.
+ // If we acquired the lock early in the spin cycle it
+ // makes sense to increase _SpinDuration proportionally.
+ // Note that we don't clamp SpinDuration precisely at SpinLimit.
+ int x = _SpinDuration ;
+ if (x < Knob_SpinLimit) {
+ if (x < Knob_Poverty) x = Knob_Poverty ;
+ _SpinDuration = x + Knob_Bonus ;
+ }
+ return 1 ;
+ }
+
+ // The CAS failed ... we can take any of the following actions:
+ // * penalize: ctr -= Knob_CASPenalty
+ // * exit spin with prejudice -- goto Abort;
+ // * exit spin without prejudice.
+ // * Since CAS is high-latency, retry again immediately.
+ prv = ox ;
+ TEVENT (Spin: cas failed) ;
+ if (caspty == -2) break ;
+ if (caspty == -1) goto Abort ;
+ ctr -= caspty ;
+ continue ;
+ }
+
+ // Did lock ownership change hands ?
+ if (ox != prv && prv != NULL ) {
+ TEVENT (spin: Owner changed)
+ if (oxpty == -2) break ;
+ if (oxpty == -1) goto Abort ;
+ ctr -= oxpty ;
+ }
+ prv = ox ;
+
+ // Abort the spin if the owner is not executing.
+ // The owner must be executing in order to drop the lock.
+ // Spinning while the owner is OFFPROC is idiocy.
+ // Consider: ctr -= RunnablePenalty ;
+ if (Knob_OState && NotRunnable (Self, ox)) {
+ TEVENT (Spin abort - notrunnable);
+ goto Abort ;
+ }
+ if (sss && _succ == NULL ) _succ = Self ;
+ }
+
+ // Spin failed with prejudice -- reduce _SpinDuration.
+ // TODO: Use an AIMD-like policy to adjust _SpinDuration.
+ // AIMD is globally stable.
+ TEVENT (Spin failure) ;
+ {
+ int x = _SpinDuration ;
+ if (x > 0) {
+ // Consider an AIMD scheme like: x -= (x >> 3) + 100
+ // This is globally sample and tends to damp the response.
+ x -= Knob_Penalty ;
+ if (x < 0) x = 0 ;
+ _SpinDuration = x ;
+ }
+ }
+
+ Abort:
+ if (MaxSpin >= 0) Adjust (&_Spinner, -1) ;
+ if (sss && _succ == Self) {
+ _succ = NULL ;
+ // Invariant: after setting succ=null a contending thread
+ // must recheck-retry _owner before parking. This usually happens
+ // in the normal usage of TrySpin(), but it's safest
+ // to make TrySpin() as foolproof as possible.
+ OrderAccess::fence() ;
+ if (TryLock(Self) > 0) return 1 ;
+ }
+ return 0 ;
+}
+
+// NotRunnable() -- informed spinning
+//
+// Don't bother spinning if the owner is not eligible to drop the lock.
+// Peek at the owner's schedctl.sc_state and Thread._thread_values and
+// spin only if the owner thread is _thread_in_Java or _thread_in_vm.
+// The thread must be runnable in order to drop the lock in timely fashion.
+// If the _owner is not runnable then spinning will not likely be
+// successful (profitable).
+//
+// Beware -- the thread referenced by _owner could have died
+// so a simply fetch from _owner->_thread_state might trap.
+// Instead, we use SafeFetchXX() to safely LD _owner->_thread_state.
+// Because of the lifecycle issues the schedctl and _thread_state values
+// observed by NotRunnable() might be garbage. NotRunnable must
+// tolerate this and consider the observed _thread_state value
+// as advisory.
+//
+// Beware too, that _owner is sometimes a BasicLock address and sometimes
+// a thread pointer. We differentiate the two cases with OwnerIsThread.
+// Alternately, we might tag the type (thread pointer vs basiclock pointer)
+// with the LSB of _owner. Another option would be to probablistically probe
+// the putative _owner->TypeTag value.
+//
+// Checking _thread_state isn't perfect. Even if the thread is
+// in_java it might be blocked on a page-fault or have been preempted
+// and sitting on a ready/dispatch queue. _thread state in conjunction
+// with schedctl.sc_state gives us a good picture of what the
+// thread is doing, however.
+//
+// TODO: check schedctl.sc_state.
+// We'll need to use SafeFetch32() to read from the schedctl block.
+// See RFE #5004247 and http://sac.sfbay.sun.com/Archives/CaseLog/arc/PSARC/2005/351/
+//
+// The return value from NotRunnable() is *advisory* -- the
+// result is based on sampling and is not necessarily coherent.
+// The caller must tolerate false-negative and false-positive errors.
+// Spinning, in general, is probabilistic anyway.
+
+
+int ObjectMonitor::NotRunnable (Thread * Self, Thread * ox) {
+ // Check either OwnerIsThread or ox->TypeTag == 2BAD.
+ if (!OwnerIsThread) return 0 ;
+
+ if (ox == NULL) return 0 ;
+
+ // Avoid transitive spinning ...
+ // Say T1 spins or blocks trying to acquire L. T1._Stalled is set to L.
+ // Immediately after T1 acquires L it's possible that T2, also
+ // spinning on L, will see L.Owner=T1 and T1._Stalled=L.
+ // This occurs transiently after T1 acquired L but before
+ // T1 managed to clear T1.Stalled. T2 does not need to abort
+ // its spin in this circumstance.
+ intptr_t BlockedOn = SafeFetchN ((intptr_t *) &ox->_Stalled, intptr_t(1)) ;
+
+ if (BlockedOn == 1) return 1 ;
+ if (BlockedOn != 0) {
+ return BlockedOn != intptr_t(this) && _owner == ox ;
+ }
+
+ assert (sizeof(((JavaThread *)ox)->_thread_state == sizeof(int)), "invariant") ;
+ int jst = SafeFetch32 ((int *) &((JavaThread *) ox)->_thread_state, -1) ; ;
+ // consider also: jst != _thread_in_Java -- but that's overspecific.
+ return jst == _thread_blocked || jst == _thread_in_native ;
+}
+
+
+// -----------------------------------------------------------------------------
+// WaitSet management ...
+
+ObjectWaiter::ObjectWaiter(Thread* thread) {
+ _next = NULL;
+ _prev = NULL;
+ _notified = 0;
+ TState = TS_RUN ;
+ _thread = thread;
+ _event = thread->_ParkEvent ;
+ _active = false;
+ assert (_event != NULL, "invariant") ;
+}
+
+void ObjectWaiter::wait_reenter_begin(ObjectMonitor *mon) {
+ JavaThread *jt = (JavaThread *)this->_thread;
+ _active = JavaThreadBlockedOnMonitorEnterState::wait_reenter_begin(jt, mon);
+}
+
+void ObjectWaiter::wait_reenter_end(ObjectMonitor *mon) {
+ JavaThread *jt = (JavaThread *)this->_thread;
+ JavaThreadBlockedOnMonitorEnterState::wait_reenter_end(jt, _active);
+}
+
+inline void ObjectMonitor::AddWaiter(ObjectWaiter* node) {
+ assert(node != NULL, "should not dequeue NULL node");
+ assert(node->_prev == NULL, "node already in list");
+ assert(node->_next == NULL, "node already in list");
+ // put node at end of queue (circular doubly linked list)
+ if (_WaitSet == NULL) {
+ _WaitSet = node;
+ node->_prev = node;
+ node->_next = node;
+ } else {
+ ObjectWaiter* head = _WaitSet ;
+ ObjectWaiter* tail = head->_prev;
+ assert(tail->_next == head, "invariant check");
+ tail->_next = node;
+ head->_prev = node;
+ node->_next = head;
+ node->_prev = tail;
+ }
+}
+
+inline ObjectWaiter* ObjectMonitor::DequeueWaiter() {
+ // dequeue the very first waiter
+ ObjectWaiter* waiter = _WaitSet;
+ if (waiter) {
+ DequeueSpecificWaiter(waiter);
+ }
+ return waiter;
+}
+
+inline void ObjectMonitor::DequeueSpecificWaiter(ObjectWaiter* node) {
+ assert(node != NULL, "should not dequeue NULL node");
+ assert(node->_prev != NULL, "node already removed from list");
+ assert(node->_next != NULL, "node already removed from list");
+ // when the waiter has woken up because of interrupt,
+ // timeout or other spurious wake-up, dequeue the
+ // waiter from waiting list
+ ObjectWaiter* next = node->_next;
+ if (next == node) {
+ assert(node->_prev == node, "invariant check");
+ _WaitSet = NULL;
+ } else {
+ ObjectWaiter* prev = node->_prev;
+ assert(prev->_next == node, "invariant check");
+ assert(next->_prev == node, "invariant check");
+ next->_prev = prev;
+ prev->_next = next;
+ if (_WaitSet == node) {
+ _WaitSet = next;
+ }
+ }
+ node->_next = NULL;
+ node->_prev = NULL;
+}
+
+// -----------------------------------------------------------------------------
+// PerfData support
+PerfCounter * ObjectMonitor::_sync_ContendedLockAttempts = NULL ;
+PerfCounter * ObjectMonitor::_sync_FutileWakeups = NULL ;
+PerfCounter * ObjectMonitor::_sync_Parks = NULL ;
+PerfCounter * ObjectMonitor::_sync_EmptyNotifications = NULL ;
+PerfCounter * ObjectMonitor::_sync_Notifications = NULL ;
+PerfCounter * ObjectMonitor::_sync_PrivateA = NULL ;
+PerfCounter * ObjectMonitor::_sync_PrivateB = NULL ;
+PerfCounter * ObjectMonitor::_sync_SlowExit = NULL ;
+PerfCounter * ObjectMonitor::_sync_SlowEnter = NULL ;
+PerfCounter * ObjectMonitor::_sync_SlowNotify = NULL ;
+PerfCounter * ObjectMonitor::_sync_SlowNotifyAll = NULL ;
+PerfCounter * ObjectMonitor::_sync_FailedSpins = NULL ;
+PerfCounter * ObjectMonitor::_sync_SuccessfulSpins = NULL ;
+PerfCounter * ObjectMonitor::_sync_MonInCirculation = NULL ;
+PerfCounter * ObjectMonitor::_sync_MonScavenged = NULL ;
+PerfCounter * ObjectMonitor::_sync_Inflations = NULL ;
+PerfCounter * ObjectMonitor::_sync_Deflations = NULL ;
+PerfLongVariable * ObjectMonitor::_sync_MonExtant = NULL ;
+
+// One-shot global initialization for the sync subsystem.
+// We could also defer initialization and initialize on-demand
+// the first time we call inflate(). Initialization would
+// be protected - like so many things - by the MonitorCache_lock.
+
+void ObjectMonitor::Initialize () {
+ static int InitializationCompleted = 0 ;
+ assert (InitializationCompleted == 0, "invariant") ;
+ InitializationCompleted = 1 ;
+ if (UsePerfData) {
+ EXCEPTION_MARK ;
+ #define NEWPERFCOUNTER(n) {n = PerfDataManager::create_counter(SUN_RT, #n, PerfData::U_Events,CHECK); }
+ #define NEWPERFVARIABLE(n) {n = PerfDataManager::create_variable(SUN_RT, #n, PerfData::U_Events,CHECK); }
+ NEWPERFCOUNTER(_sync_Inflations) ;
+ NEWPERFCOUNTER(_sync_Deflations) ;
+ NEWPERFCOUNTER(_sync_ContendedLockAttempts) ;
+ NEWPERFCOUNTER(_sync_FutileWakeups) ;
+ NEWPERFCOUNTER(_sync_Parks) ;
+ NEWPERFCOUNTER(_sync_EmptyNotifications) ;
+ NEWPERFCOUNTER(_sync_Notifications) ;
+ NEWPERFCOUNTER(_sync_SlowEnter) ;
+ NEWPERFCOUNTER(_sync_SlowExit) ;
+ NEWPERFCOUNTER(_sync_SlowNotify) ;
+ NEWPERFCOUNTER(_sync_SlowNotifyAll) ;
+ NEWPERFCOUNTER(_sync_FailedSpins) ;
+ NEWPERFCOUNTER(_sync_SuccessfulSpins) ;
+ NEWPERFCOUNTER(_sync_PrivateA) ;
+ NEWPERFCOUNTER(_sync_PrivateB) ;
+ NEWPERFCOUNTER(_sync_MonInCirculation) ;
+ NEWPERFCOUNTER(_sync_MonScavenged) ;
+ NEWPERFVARIABLE(_sync_MonExtant) ;
+ #undef NEWPERFCOUNTER
+ }
+}
+
+
+// Compile-time asserts
+// When possible, it's better to catch errors deterministically at
+// compile-time than at runtime. The down-side to using compile-time
+// asserts is that error message -- often something about negative array
+// indices -- is opaque.
+
+#define CTASSERT(x) { int tag[1-(2*!(x))]; printf ("Tag @" INTPTR_FORMAT "\n", (intptr_t)tag); }
+
+void ObjectMonitor::ctAsserts() {
+ CTASSERT(offset_of (ObjectMonitor, _header) == 0);
+}
+
+
+static char * kvGet (char * kvList, const char * Key) {
+ if (kvList == NULL) return NULL ;
+ size_t n = strlen (Key) ;
+ char * Search ;
+ for (Search = kvList ; *Search ; Search += strlen(Search) + 1) {
+ if (strncmp (Search, Key, n) == 0) {
+ if (Search[n] == '=') return Search + n + 1 ;
+ if (Search[n] == 0) return (char *) "1" ;
+ }
+ }
+ return NULL ;
+}
+
+static int kvGetInt (char * kvList, const char * Key, int Default) {
+ char * v = kvGet (kvList, Key) ;
+ int rslt = v ? ::strtol (v, NULL, 0) : Default ;
+ if (Knob_ReportSettings && v != NULL) {
+ ::printf (" SyncKnob: %s %d(%d)\n", Key, rslt, Default) ;
+ ::fflush (stdout) ;
+ }
+ return rslt ;
+}
+
+void ObjectMonitor::DeferredInitialize () {
+ if (InitDone > 0) return ;
+ if (Atomic::cmpxchg (-1, &InitDone, 0) != 0) {
+ while (InitDone != 1) ;
+ return ;
+ }
+
+ // One-shot global initialization ...
+ // The initialization is idempotent, so we don't need locks.
+ // In the future consider doing this via os::init_2().
+ // SyncKnobs consist of <Key>=<Value> pairs in the style
+ // of environment variables. Start by converting ':' to NUL.
+
+ if (SyncKnobs == NULL) SyncKnobs = "" ;
+
+ size_t sz = strlen (SyncKnobs) ;
+ char * knobs = (char *) malloc (sz + 2) ;
+ if (knobs == NULL) {
+ vm_exit_out_of_memory (sz + 2, "Parse SyncKnobs") ;
+ guarantee (0, "invariant") ;
+ }
+ strcpy (knobs, SyncKnobs) ;
+ knobs[sz+1] = 0 ;
+ for (char * p = knobs ; *p ; p++) {
+ if (*p == ':') *p = 0 ;
+ }
+
+ #define SETKNOB(x) { Knob_##x = kvGetInt (knobs, #x, Knob_##x); }
+ SETKNOB(ReportSettings) ;
+ SETKNOB(Verbose) ;
+ SETKNOB(FixedSpin) ;
+ SETKNOB(SpinLimit) ;
+ SETKNOB(SpinBase) ;
+ SETKNOB(SpinBackOff);
+ SETKNOB(CASPenalty) ;
+ SETKNOB(OXPenalty) ;
+ SETKNOB(LogSpins) ;
+ SETKNOB(SpinSetSucc) ;
+ SETKNOB(SuccEnabled) ;
+ SETKNOB(SuccRestrict) ;
+ SETKNOB(Penalty) ;
+ SETKNOB(Bonus) ;
+ SETKNOB(BonusB) ;
+ SETKNOB(Poverty) ;
+ SETKNOB(SpinAfterFutile) ;
+ SETKNOB(UsePause) ;
+ SETKNOB(SpinEarly) ;
+ SETKNOB(OState) ;
+ SETKNOB(MaxSpinners) ;
+ SETKNOB(PreSpin) ;
+ SETKNOB(ExitPolicy) ;
+ SETKNOB(QMode);
+ SETKNOB(ResetEvent) ;
+ SETKNOB(MoveNotifyee) ;
+ SETKNOB(FastHSSEC) ;
+ #undef SETKNOB
+
+ if (os::is_MP()) {
+ BackOffMask = (1 << Knob_SpinBackOff) - 1 ;
+ if (Knob_ReportSettings) ::printf ("BackOffMask=%X\n", BackOffMask) ;
+ // CONSIDER: BackOffMask = ROUNDUP_NEXT_POWER2 (ncpus-1)
+ } else {
+ Knob_SpinLimit = 0 ;
+ Knob_SpinBase = 0 ;
+ Knob_PreSpin = 0 ;
+ Knob_FixedSpin = -1 ;
+ }
+
+ if (Knob_LogSpins == 0) {
+ ObjectMonitor::_sync_FailedSpins = NULL ;
+ }
+
+ free (knobs) ;
+ OrderAccess::fence() ;
+ InitDone = 1 ;
+}
+
+#ifndef PRODUCT
+void ObjectMonitor::verify() {
+}
+
+void ObjectMonitor::print() {
+}
+#endif
--- a/hotspot/src/share/vm/runtime/objectMonitor.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/objectMonitor.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -22,6 +22,32 @@
*
*/
+
+// ObjectWaiter serves as a "proxy" or surrogate thread.
+// TODO-FIXME: Eliminate ObjectWaiter and use the thread-specific
+// ParkEvent instead. Beware, however, that the JVMTI code
+// knows about ObjectWaiters, so we'll have to reconcile that code.
+// See next_waiter(), first_waiter(), etc.
+
+class ObjectWaiter : public StackObj {
+ public:
+ enum TStates { TS_UNDEF, TS_READY, TS_RUN, TS_WAIT, TS_ENTER, TS_CXQ } ;
+ enum Sorted { PREPEND, APPEND, SORTED } ;
+ ObjectWaiter * volatile _next;
+ ObjectWaiter * volatile _prev;
+ Thread* _thread;
+ ParkEvent * _event;
+ volatile int _notified ;
+ volatile TStates TState ;
+ Sorted _Sorted ; // List placement disposition
+ bool _active ; // Contention monitoring is enabled
+ public:
+ ObjectWaiter(Thread* thread);
+
+ void wait_reenter_begin(ObjectMonitor *mon);
+ void wait_reenter_end(ObjectMonitor *mon);
+};
+
// WARNING:
// This is a very sensitive and fragile class. DO NOT make any
// change unless you are fully aware of the underlying semantics.
@@ -38,8 +64,6 @@
// It is also used as RawMonitor by the JVMTI
-class ObjectWaiter;
-
class ObjectMonitor {
public:
enum {
@@ -74,13 +98,16 @@
public:
- ObjectMonitor();
- ~ObjectMonitor();
-
markOop header() const;
void set_header(markOop hdr);
- intptr_t is_busy() const;
+ intptr_t is_busy() const {
+ // TODO-FIXME: merge _count and _waiters.
+ // TODO-FIXME: assert _owner == null implies _recursions = 0
+ // TODO-FIXME: assert _WaitSet != null implies _count > 0
+ return _count|_waiters|intptr_t(_owner)|intptr_t(_cxq)|intptr_t(_EntryList ) ;
+ }
+
intptr_t is_entered(Thread* current) const;
void* owner() const;
@@ -91,13 +118,58 @@
intptr_t count() const;
void set_count(intptr_t count);
intptr_t contentions() const ;
+ intptr_t recursions() const { return _recursions; }
// JVM/DI GetMonitorInfo() needs this
- Thread * thread_of_waiter (ObjectWaiter *) ;
- ObjectWaiter * first_waiter () ;
- ObjectWaiter * next_waiter(ObjectWaiter* o);
+ ObjectWaiter* first_waiter() { return _WaitSet; }
+ ObjectWaiter* next_waiter(ObjectWaiter* o) { return o->_next; }
+ Thread* thread_of_waiter(ObjectWaiter* o) { return o->_thread; }
+
+ // initialize the monitor, exception the semaphore, all other fields
+ // are simple integers or pointers
+ ObjectMonitor() {
+ _header = NULL;
+ _count = 0;
+ _waiters = 0,
+ _recursions = 0;
+ _object = NULL;
+ _owner = NULL;
+ _WaitSet = NULL;
+ _WaitSetLock = 0 ;
+ _Responsible = NULL ;
+ _succ = NULL ;
+ _cxq = NULL ;
+ FreeNext = NULL ;
+ _EntryList = NULL ;
+ _SpinFreq = 0 ;
+ _SpinClock = 0 ;
+ OwnerIsThread = 0 ;
+ }
- intptr_t recursions() const { return _recursions; }
+ ~ObjectMonitor() {
+ // TODO: Add asserts ...
+ // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0
+ // _count == 0 _EntryList == NULL etc
+ }
+
+private:
+ void Recycle () {
+ // TODO: add stronger asserts ...
+ // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0
+ // _count == 0 EntryList == NULL
+ // _recursions == 0 _WaitSet == NULL
+ // TODO: assert (is_busy()|_recursions) == 0
+ _succ = NULL ;
+ _EntryList = NULL ;
+ _cxq = NULL ;
+ _WaitSet = NULL ;
+ _recursions = 0 ;
+ _SpinFreq = 0 ;
+ _SpinClock = 0 ;
+ OwnerIsThread = 0 ;
+ }
+
+public:
void* object() const;
void* object_addr();
@@ -122,22 +194,9 @@
intptr_t complete_exit(TRAPS);
void reenter(intptr_t recursions, TRAPS);
- int raw_enter(TRAPS);
- int raw_exit(TRAPS);
- int raw_wait(jlong millis, bool interruptable, TRAPS);
- int raw_notify(TRAPS);
- int raw_notifyAll(TRAPS);
-
private:
- // JVMTI support -- remove ASAP
- int SimpleEnter (Thread * Self) ;
- int SimpleExit (Thread * Self) ;
- int SimpleWait (Thread * Self, jlong millis) ;
- int SimpleNotify (Thread * Self, bool All) ;
-
- private:
- void Recycle () ;
void AddWaiter (ObjectWaiter * waiter) ;
+ static void DeferredInitialize();
ObjectWaiter * DequeueWaiter () ;
void DequeueSpecificWaiter (ObjectWaiter * waiter) ;
@@ -172,13 +231,17 @@
// The VM assumes write ordering wrt these fields, which can be
// read from other threads.
+ protected: // protected for jvmtiRawMonitor
void * volatile _owner; // pointer to owning thread OR BasicLock
volatile intptr_t _recursions; // recursion count, 0 for first entry
+ private:
int OwnerIsThread ; // _owner is (Thread *) vs SP/BasicLock
ObjectWaiter * volatile _cxq ; // LL of recently-arrived threads blocked on entry.
// The list is actually composed of WaitNodes, acting
// as proxies for Threads.
+ protected:
ObjectWaiter * volatile _EntryList ; // Threads blocked on entry or reentry.
+ private:
Thread * volatile _succ ; // Heir presumptive thread - used for futile wakeup throttling
Thread * volatile _Responsible ;
int _PromptDrain ; // rqst to drain cxq into EntryList ASAP
@@ -196,8 +259,12 @@
volatile intptr_t _count; // reference count to prevent reclaimation/deflation
// at stop-the-world time. See deflate_idle_monitors().
// _count is approximately |_WaitSet| + |_EntryList|
+ protected:
volatile intptr_t _waiters; // number of waiting threads
+ private:
+ protected:
ObjectWaiter * volatile _WaitSet; // LL of threads wait()ing on the monitor
+ private:
volatile int _WaitSetLock; // protects Wait Queue - simple spinlock
public:
@@ -205,4 +272,37 @@
ObjectMonitor * FreeNext ; // Free list linkage
intptr_t StatA, StatsB ;
+ public:
+ static void Initialize () ;
+ static PerfCounter * _sync_ContendedLockAttempts ;
+ static PerfCounter * _sync_FutileWakeups ;
+ static PerfCounter * _sync_Parks ;
+ static PerfCounter * _sync_EmptyNotifications ;
+ static PerfCounter * _sync_Notifications ;
+ static PerfCounter * _sync_SlowEnter ;
+ static PerfCounter * _sync_SlowExit ;
+ static PerfCounter * _sync_SlowNotify ;
+ static PerfCounter * _sync_SlowNotifyAll ;
+ static PerfCounter * _sync_FailedSpins ;
+ static PerfCounter * _sync_SuccessfulSpins ;
+ static PerfCounter * _sync_PrivateA ;
+ static PerfCounter * _sync_PrivateB ;
+ static PerfCounter * _sync_MonInCirculation ;
+ static PerfCounter * _sync_MonScavenged ;
+ static PerfCounter * _sync_Inflations ;
+ static PerfCounter * _sync_Deflations ;
+ static PerfLongVariable * _sync_MonExtant ;
+
+ public:
+ static int Knob_Verbose;
+ static int Knob_SpinLimit;
};
+
+#undef TEVENT
+#define TEVENT(nom) {if (SyncVerbose) FEVENT(nom); }
+
+#define FEVENT(nom) { static volatile int ctr = 0 ; int v = ++ctr ; if ((v & (v-1)) == 0) { ::printf (#nom " : %d \n", v); ::fflush(stdout); }}
+
+#undef TEVENT
+#define TEVENT(nom) {;}
+
--- a/hotspot/src/share/vm/runtime/objectMonitor.inline.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/objectMonitor.inline.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -104,7 +104,3 @@
_count = 0;
}
-
-// here are the platform-dependent bodies:
-
-# include "incls/_objectMonitor_pd.inline.hpp.incl"
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/park.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,237 @@
+/*
+ * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+
+
+# include "incls/_precompiled.incl"
+# include "incls/_park.cpp.incl"
+
+
+// Lifecycle management for TSM ParkEvents.
+// ParkEvents are type-stable (TSM).
+// In our particular implementation they happen to be immortal.
+//
+// We manage concurrency on the FreeList with a CAS-based
+// detach-modify-reattach idiom that avoids the ABA problems
+// that would otherwise be present in a simple CAS-based
+// push-pop implementation. (push-one and pop-all)
+//
+// Caveat: Allocate() and Release() may be called from threads
+// other than the thread associated with the Event!
+// If we need to call Allocate() when running as the thread in
+// question then look for the PD calls to initialize native TLS.
+// Native TLS (Win32/Linux/Solaris) can only be initialized or
+// accessed by the associated thread.
+// See also pd_initialize().
+//
+// Note that we could defer associating a ParkEvent with a thread
+// until the 1st time the thread calls park(). unpark() calls to
+// an unprovisioned thread would be ignored. The first park() call
+// for a thread would allocate and associate a ParkEvent and return
+// immediately.
+
+volatile int ParkEvent::ListLock = 0 ;
+ParkEvent * volatile ParkEvent::FreeList = NULL ;
+
+ParkEvent * ParkEvent::Allocate (Thread * t) {
+ // In rare cases -- JVM_RawMonitor* operations -- we can find t == null.
+ ParkEvent * ev ;
+
+ // Start by trying to recycle an existing but unassociated
+ // ParkEvent from the global free list.
+ for (;;) {
+ ev = FreeList ;
+ if (ev == NULL) break ;
+ // 1: Detach - sequester or privatize the list
+ // Tantamount to ev = Swap (&FreeList, NULL)
+ if (Atomic::cmpxchg_ptr (NULL, &FreeList, ev) != ev) {
+ continue ;
+ }
+
+ // We've detached the list. The list in-hand is now
+ // local to this thread. This thread can operate on the
+ // list without risk of interference from other threads.
+ // 2: Extract -- pop the 1st element from the list.
+ ParkEvent * List = ev->FreeNext ;
+ if (List == NULL) break ;
+ for (;;) {
+ // 3: Try to reattach the residual list
+ guarantee (List != NULL, "invariant") ;
+ ParkEvent * Arv = (ParkEvent *) Atomic::cmpxchg_ptr (List, &FreeList, NULL) ;
+ if (Arv == NULL) break ;
+
+ // New nodes arrived. Try to detach the recent arrivals.
+ if (Atomic::cmpxchg_ptr (NULL, &FreeList, Arv) != Arv) {
+ continue ;
+ }
+ guarantee (Arv != NULL, "invariant") ;
+ // 4: Merge Arv into List
+ ParkEvent * Tail = List ;
+ while (Tail->FreeNext != NULL) Tail = Tail->FreeNext ;
+ Tail->FreeNext = Arv ;
+ }
+ break ;
+ }
+
+ if (ev != NULL) {
+ guarantee (ev->AssociatedWith == NULL, "invariant") ;
+ } else {
+ // Do this the hard way -- materialize a new ParkEvent.
+ // In rare cases an allocating thread might detach a long list --
+ // installing null into FreeList -- and then stall or be obstructed.
+ // A 2nd thread calling Allocate() would see FreeList == null.
+ // The list held privately by the 1st thread is unavailable to the 2nd thread.
+ // In that case the 2nd thread would have to materialize a new ParkEvent,
+ // even though free ParkEvents existed in the system. In this case we end up
+ // with more ParkEvents in circulation than we need, but the race is
+ // rare and the outcome is benign. Ideally, the # of extant ParkEvents
+ // is equal to the maximum # of threads that existed at any one time.
+ // Because of the race mentioned above, segments of the freelist
+ // can be transiently inaccessible. At worst we may end up with the
+ // # of ParkEvents in circulation slightly above the ideal.
+ // Note that if we didn't have the TSM/immortal constraint, then
+ // when reattaching, above, we could trim the list.
+ ev = new ParkEvent () ;
+ guarantee ((intptr_t(ev) & 0xFF) == 0, "invariant") ;
+ }
+ ev->reset() ; // courtesy to caller
+ ev->AssociatedWith = t ; // Associate ev with t
+ ev->FreeNext = NULL ;
+ return ev ;
+}
+
+void ParkEvent::Release (ParkEvent * ev) {
+ if (ev == NULL) return ;
+ guarantee (ev->FreeNext == NULL , "invariant") ;
+ ev->AssociatedWith = NULL ;
+ for (;;) {
+ // Push ev onto FreeList
+ // The mechanism is "half" lock-free.
+ ParkEvent * List = FreeList ;
+ ev->FreeNext = List ;
+ if (Atomic::cmpxchg_ptr (ev, &FreeList, List) == List) break ;
+ }
+}
+
+// Override operator new and delete so we can ensure that the
+// least significant byte of ParkEvent addresses is 0.
+// Beware that excessive address alignment is undesirable
+// as it can result in D$ index usage imbalance as
+// well as bank access imbalance on Niagara-like platforms,
+// although Niagara's hash function should help.
+
+void * ParkEvent::operator new (size_t sz) {
+ return (void *) ((intptr_t (CHeapObj::operator new (sz + 256)) + 256) & -256) ;
+}
+
+void ParkEvent::operator delete (void * a) {
+ // ParkEvents are type-stable and immortal ...
+ ShouldNotReachHere();
+}
+
+
+// 6399321 As a temporary measure we copied & modified the ParkEvent::
+// allocate() and release() code for use by Parkers. The Parker:: forms
+// will eventually be removed as we consolide and shift over to ParkEvents
+// for both builtin synchronization and JSR166 operations.
+
+volatile int Parker::ListLock = 0 ;
+Parker * volatile Parker::FreeList = NULL ;
+
+Parker * Parker::Allocate (JavaThread * t) {
+ guarantee (t != NULL, "invariant") ;
+ Parker * p ;
+
+ // Start by trying to recycle an existing but unassociated
+ // Parker from the global free list.
+ for (;;) {
+ p = FreeList ;
+ if (p == NULL) break ;
+ // 1: Detach
+ // Tantamount to p = Swap (&FreeList, NULL)
+ if (Atomic::cmpxchg_ptr (NULL, &FreeList, p) != p) {
+ continue ;
+ }
+
+ // We've detached the list. The list in-hand is now
+ // local to this thread. This thread can operate on the
+ // list without risk of interference from other threads.
+ // 2: Extract -- pop the 1st element from the list.
+ Parker * List = p->FreeNext ;
+ if (List == NULL) break ;
+ for (;;) {
+ // 3: Try to reattach the residual list
+ guarantee (List != NULL, "invariant") ;
+ Parker * Arv = (Parker *) Atomic::cmpxchg_ptr (List, &FreeList, NULL) ;
+ if (Arv == NULL) break ;
+
+ // New nodes arrived. Try to detach the recent arrivals.
+ if (Atomic::cmpxchg_ptr (NULL, &FreeList, Arv) != Arv) {
+ continue ;
+ }
+ guarantee (Arv != NULL, "invariant") ;
+ // 4: Merge Arv into List
+ Parker * Tail = List ;
+ while (Tail->FreeNext != NULL) Tail = Tail->FreeNext ;
+ Tail->FreeNext = Arv ;
+ }
+ break ;
+ }
+
+ if (p != NULL) {
+ guarantee (p->AssociatedWith == NULL, "invariant") ;
+ } else {
+ // Do this the hard way -- materialize a new Parker..
+ // In rare cases an allocating thread might detach
+ // a long list -- installing null into FreeList --and
+ // then stall. Another thread calling Allocate() would see
+ // FreeList == null and then invoke the ctor. In this case we
+ // end up with more Parkers in circulation than we need, but
+ // the race is rare and the outcome is benign.
+ // Ideally, the # of extant Parkers is equal to the
+ // maximum # of threads that existed at any one time.
+ // Because of the race mentioned above, segments of the
+ // freelist can be transiently inaccessible. At worst
+ // we may end up with the # of Parkers in circulation
+ // slightly above the ideal.
+ p = new Parker() ;
+ }
+ p->AssociatedWith = t ; // Associate p with t
+ p->FreeNext = NULL ;
+ return p ;
+}
+
+
+void Parker::Release (Parker * p) {
+ if (p == NULL) return ;
+ guarantee (p->AssociatedWith != NULL, "invariant") ;
+ guarantee (p->FreeNext == NULL , "invariant") ;
+ p->AssociatedWith = NULL ;
+ for (;;) {
+ // Push p onto FreeList
+ Parker * List = FreeList ;
+ p->FreeNext = List ;
+ if (Atomic::cmpxchg_ptr (p, &FreeList, List) == List) break ;
+ }
+}
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/src/share/vm/runtime/park.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -0,0 +1,169 @@
+/*
+ * Copyright (c) 1997, 2010, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ *
+ */
+/*
+ * Per-thread blocking support for JSR166. See the Java-level
+ * Documentation for rationale. Basically, park acts like wait, unpark
+ * like notify.
+ *
+ * 6271289 --
+ * To avoid errors where an os thread expires but the JavaThread still
+ * exists, Parkers are immortal (type-stable) and are recycled across
+ * new threads. This parallels the ParkEvent implementation.
+ * Because park-unpark allow spurious wakeups it is harmless if an
+ * unpark call unparks a new thread using the old Parker reference.
+ *
+ * In the future we'll want to think about eliminating Parker and using
+ * ParkEvent instead. There's considerable duplication between the two
+ * services.
+ *
+ */
+
+class Parker : public os::PlatformParker {
+private:
+ volatile int _counter ;
+ Parker * FreeNext ;
+ JavaThread * AssociatedWith ; // Current association
+
+public:
+ Parker() : PlatformParker() {
+ _counter = 0 ;
+ FreeNext = NULL ;
+ AssociatedWith = NULL ;
+ }
+protected:
+ ~Parker() { ShouldNotReachHere(); }
+public:
+ // For simplicity of interface with Java, all forms of park (indefinite,
+ // relative, and absolute) are multiplexed into one call.
+ void park(bool isAbsolute, jlong time);
+ void unpark();
+
+ // Lifecycle operators
+ static Parker * Allocate (JavaThread * t) ;
+ static void Release (Parker * e) ;
+private:
+ static Parker * volatile FreeList ;
+ static volatile int ListLock ;
+
+};
+
+/////////////////////////////////////////////////////////////
+//
+// ParkEvents are type-stable and immortal.
+//
+// Lifecycle: Once a ParkEvent is associated with a thread that ParkEvent remains
+// associated with the thread for the thread's entire lifetime - the relationship is
+// stable. A thread will be associated at most one ParkEvent. When the thread
+// expires, the ParkEvent moves to the EventFreeList. New threads attempt to allocate from
+// the EventFreeList before creating a new Event. Type-stability frees us from
+// worrying about stale Event or Thread references in the objectMonitor subsystem.
+// (A reference to ParkEvent is always valid, even though the event may no longer be associated
+// with the desired or expected thread. A key aspect of this design is that the callers of
+// park, unpark, etc must tolerate stale references and spurious wakeups).
+//
+// Only the "associated" thread can block (park) on the ParkEvent, although
+// any other thread can unpark a reachable parkevent. Park() is allowed to
+// return spuriously. In fact park-unpark a really just an optimization to
+// avoid unbounded spinning and surrender the CPU to be a polite system citizen.
+// A degenerate albeit "impolite" park-unpark implementation could simply return.
+// See http://blogs.sun.com/dave for more details.
+//
+// Eventually I'd like to eliminate Events and ObjectWaiters, both of which serve as
+// thread proxies, and simply make the THREAD structure type-stable and persistent.
+// Currently, we unpark events associated with threads, but ideally we'd just
+// unpark threads.
+//
+// The base-class, PlatformEvent, is platform-specific while the ParkEvent is
+// platform-independent. PlatformEvent provides park(), unpark(), etc., and
+// is abstract -- that is, a PlatformEvent should never be instantiated except
+// as part of a ParkEvent.
+// Equivalently we could have defined a platform-independent base-class that
+// exported Allocate(), Release(), etc. The platform-specific class would extend
+// that base-class, adding park(), unpark(), etc.
+//
+// A word of caution: The JVM uses 2 very similar constructs:
+// 1. ParkEvent are used for Java-level "monitor" synchronization.
+// 2. Parkers are used by JSR166-JUC park-unpark.
+//
+// We'll want to eventually merge these redundant facilities and use ParkEvent.
+
+
+class ParkEvent : public os::PlatformEvent {
+ private:
+ ParkEvent * FreeNext ;
+
+ // Current association
+ Thread * AssociatedWith ;
+ intptr_t RawThreadIdentity ; // LWPID etc
+ volatile int Incarnation ;
+
+ // diagnostic : keep track of last thread to wake this thread.
+ // this is useful for construction of dependency graphs.
+ void * LastWaker ;
+
+ public:
+ // MCS-CLH list linkage and Native Mutex/Monitor
+ ParkEvent * volatile ListNext ;
+ ParkEvent * volatile ListPrev ;
+ volatile intptr_t OnList ;
+ volatile int TState ;
+ volatile int Notified ; // for native monitor construct
+ volatile int IsWaiting ; // Enqueued on WaitSet
+
+
+ private:
+ static ParkEvent * volatile FreeList ;
+ static volatile int ListLock ;
+
+ // It's prudent to mark the dtor as "private"
+ // ensuring that it's not visible outside the package.
+ // Unfortunately gcc warns about such usage, so
+ // we revert to the less desirable "protected" visibility.
+ // The other compilers accept private dtors.
+
+ protected: // Ensure dtor is never invoked
+ ~ParkEvent() { guarantee (0, "invariant") ; }
+
+ ParkEvent() : PlatformEvent() {
+ AssociatedWith = NULL ;
+ FreeNext = NULL ;
+ ListNext = NULL ;
+ ListPrev = NULL ;
+ OnList = 0 ;
+ TState = 0 ;
+ Notified = 0 ;
+ IsWaiting = 0 ;
+ }
+
+ // We use placement-new to force ParkEvent instances to be
+ // aligned on 256-byte address boundaries. This ensures that the least
+ // significant byte of a ParkEvent address is always 0.
+
+ void * operator new (size_t sz) ;
+ void operator delete (void * a) ;
+
+ public:
+ static ParkEvent * Allocate (Thread * t) ;
+ static void Release (ParkEvent * e) ;
+} ;
--- a/hotspot/src/share/vm/runtime/synchronizer.cpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/synchronizer.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -32,15 +32,12 @@
#define ATTR
#endif
-// Native markword accessors for synchronization and hashCode().
-//
// The "core" versions of monitor enter and exit reside in this file.
// The interpreter and compilers contain specialized transliterated
// variants of the enter-exit fast-path operations. See i486.ad fast_lock(),
// for instance. If you make changes here, make sure to modify the
// interpreter, and both C1 and C2 fast-path inline locking code emission.
//
-// TODO: merge the objectMonitor and synchronizer classes.
//
// -----------------------------------------------------------------------------
@@ -53,16 +50,6 @@
jlong, uintptr_t, char*, int, long);
HS_DTRACE_PROBE_DECL4(hotspot, monitor__waited,
jlong, uintptr_t, char*, int);
-HS_DTRACE_PROBE_DECL4(hotspot, monitor__notify,
- jlong, uintptr_t, char*, int);
-HS_DTRACE_PROBE_DECL4(hotspot, monitor__notifyAll,
- jlong, uintptr_t, char*, int);
-HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__enter,
- jlong, uintptr_t, char*, int);
-HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__entered,
- jlong, uintptr_t, char*, int);
-HS_DTRACE_PROBE_DECL4(hotspot, monitor__contended__exit,
- jlong, uintptr_t, char*, int);
#define DTRACE_MONITOR_PROBE_COMMON(klassOop, thread) \
char* bytes = NULL; \
@@ -99,61 +86,300 @@
#endif // ndef DTRACE_ENABLED
-// ObjectWaiter serves as a "proxy" or surrogate thread.
-// TODO-FIXME: Eliminate ObjectWaiter and use the thread-specific
-// ParkEvent instead. Beware, however, that the JVMTI code
-// knows about ObjectWaiters, so we'll have to reconcile that code.
-// See next_waiter(), first_waiter(), etc.
+// This exists only as a workaround of dtrace bug 6254741
+int dtrace_waited_probe(ObjectMonitor* monitor, Handle obj, Thread* thr) {
+ DTRACE_MONITOR_PROBE(waited, monitor, obj(), thr);
+ return 0;
+}
+
+#define NINFLATIONLOCKS 256
+static volatile intptr_t InflationLocks [NINFLATIONLOCKS] ;
+
+ObjectMonitor * ObjectSynchronizer::gBlockList = NULL ;
+ObjectMonitor * volatile ObjectSynchronizer::gFreeList = NULL ;
+ObjectMonitor * volatile ObjectSynchronizer::gOmInUseList = NULL ;
+int ObjectSynchronizer::gOmInUseCount = 0;
+static volatile intptr_t ListLock = 0 ; // protects global monitor free-list cache
+static volatile int MonitorFreeCount = 0 ; // # on gFreeList
+static volatile int MonitorPopulation = 0 ; // # Extant -- in circulation
+#define CHAINMARKER ((oop)-1)
+
+// -----------------------------------------------------------------------------
+// Fast Monitor Enter/Exit
+// This the fast monitor enter. The interpreter and compiler use
+// some assembly copies of this code. Make sure update those code
+// if the following function is changed. The implementation is
+// extremely sensitive to race condition. Be careful.
+
+void ObjectSynchronizer::fast_enter(Handle obj, BasicLock* lock, bool attempt_rebias, TRAPS) {
+ if (UseBiasedLocking) {
+ if (!SafepointSynchronize::is_at_safepoint()) {
+ BiasedLocking::Condition cond = BiasedLocking::revoke_and_rebias(obj, attempt_rebias, THREAD);
+ if (cond == BiasedLocking::BIAS_REVOKED_AND_REBIASED) {
+ return;
+ }
+ } else {
+ assert(!attempt_rebias, "can not rebias toward VM thread");
+ BiasedLocking::revoke_at_safepoint(obj);
+ }
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+
+ slow_enter (obj, lock, THREAD) ;
+}
+
+void ObjectSynchronizer::fast_exit(oop object, BasicLock* lock, TRAPS) {
+ assert(!object->mark()->has_bias_pattern(), "should not see bias pattern here");
+ // if displaced header is null, the previous enter is recursive enter, no-op
+ markOop dhw = lock->displaced_header();
+ markOop mark ;
+ if (dhw == NULL) {
+ // Recursive stack-lock.
+ // Diagnostics -- Could be: stack-locked, inflating, inflated.
+ mark = object->mark() ;
+ assert (!mark->is_neutral(), "invariant") ;
+ if (mark->has_locker() && mark != markOopDesc::INFLATING()) {
+ assert(THREAD->is_lock_owned((address)mark->locker()), "invariant") ;
+ }
+ if (mark->has_monitor()) {
+ ObjectMonitor * m = mark->monitor() ;
+ assert(((oop)(m->object()))->mark() == mark, "invariant") ;
+ assert(m->is_entered(THREAD), "invariant") ;
+ }
+ return ;
+ }
+
+ mark = object->mark() ;
-class ObjectWaiter : public StackObj {
- public:
- enum TStates { TS_UNDEF, TS_READY, TS_RUN, TS_WAIT, TS_ENTER, TS_CXQ } ;
- enum Sorted { PREPEND, APPEND, SORTED } ;
- ObjectWaiter * volatile _next;
- ObjectWaiter * volatile _prev;
- Thread* _thread;
- ParkEvent * _event;
- volatile int _notified ;
- volatile TStates TState ;
- Sorted _Sorted ; // List placement disposition
- bool _active ; // Contention monitoring is enabled
- public:
- ObjectWaiter(Thread* thread) {
- _next = NULL;
- _prev = NULL;
- _notified = 0;
- TState = TS_RUN ;
- _thread = thread;
- _event = thread->_ParkEvent ;
- _active = false;
- assert (_event != NULL, "invariant") ;
+ // If the object is stack-locked by the current thread, try to
+ // swing the displaced header from the box back to the mark.
+ if (mark == (markOop) lock) {
+ assert (dhw->is_neutral(), "invariant") ;
+ if ((markOop) Atomic::cmpxchg_ptr (dhw, object->mark_addr(), mark) == mark) {
+ TEVENT (fast_exit: release stacklock) ;
+ return;
+ }
+ }
+
+ ObjectSynchronizer::inflate(THREAD, object)->exit (THREAD) ;
+}
+
+// -----------------------------------------------------------------------------
+// Interpreter/Compiler Slow Case
+// This routine is used to handle interpreter/compiler slow case
+// We don't need to use fast path here, because it must have been
+// failed in the interpreter/compiler code.
+void ObjectSynchronizer::slow_enter(Handle obj, BasicLock* lock, TRAPS) {
+ markOop mark = obj->mark();
+ assert(!mark->has_bias_pattern(), "should not see bias pattern here");
+
+ if (mark->is_neutral()) {
+ // Anticipate successful CAS -- the ST of the displaced mark must
+ // be visible <= the ST performed by the CAS.
+ lock->set_displaced_header(mark);
+ if (mark == (markOop) Atomic::cmpxchg_ptr(lock, obj()->mark_addr(), mark)) {
+ TEVENT (slow_enter: release stacklock) ;
+ return ;
+ }
+ // Fall through to inflate() ...
+ } else
+ if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
+ assert(lock != mark->locker(), "must not re-lock the same lock");
+ assert(lock != (BasicLock*)obj->mark(), "don't relock with same BasicLock");
+ lock->set_displaced_header(NULL);
+ return;
+ }
+
+#if 0
+ // The following optimization isn't particularly useful.
+ if (mark->has_monitor() && mark->monitor()->is_entered(THREAD)) {
+ lock->set_displaced_header (NULL) ;
+ return ;
+ }
+#endif
+
+ // The object header will never be displaced to this lock,
+ // so it does not matter what the value is, except that it
+ // must be non-zero to avoid looking like a re-entrant lock,
+ // and must not look locked either.
+ lock->set_displaced_header(markOopDesc::unused_mark());
+ ObjectSynchronizer::inflate(THREAD, obj())->enter(THREAD);
+}
+
+// This routine is used to handle interpreter/compiler slow case
+// We don't need to use fast path here, because it must have
+// failed in the interpreter/compiler code. Simply use the heavy
+// weight monitor should be ok, unless someone find otherwise.
+void ObjectSynchronizer::slow_exit(oop object, BasicLock* lock, TRAPS) {
+ fast_exit (object, lock, THREAD) ;
+}
+
+// -----------------------------------------------------------------------------
+// Class Loader support to workaround deadlocks on the class loader lock objects
+// Also used by GC
+// complete_exit()/reenter() are used to wait on a nested lock
+// i.e. to give up an outer lock completely and then re-enter
+// Used when holding nested locks - lock acquisition order: lock1 then lock2
+// 1) complete_exit lock1 - saving recursion count
+// 2) wait on lock2
+// 3) when notified on lock2, unlock lock2
+// 4) reenter lock1 with original recursion count
+// 5) lock lock2
+// NOTE: must use heavy weight monitor to handle complete_exit/reenter()
+intptr_t ObjectSynchronizer::complete_exit(Handle obj, TRAPS) {
+ TEVENT (complete_exit) ;
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
}
- void wait_reenter_begin(ObjectMonitor *mon) {
- JavaThread *jt = (JavaThread *)this->_thread;
- _active = JavaThreadBlockedOnMonitorEnterState::wait_reenter_begin(jt, mon);
+ ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
+
+ return monitor->complete_exit(THREAD);
+}
+
+// NOTE: must use heavy weight monitor to handle complete_exit/reenter()
+void ObjectSynchronizer::reenter(Handle obj, intptr_t recursion, TRAPS) {
+ TEVENT (reenter) ;
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+
+ ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
+
+ monitor->reenter(recursion, THREAD);
+}
+// -----------------------------------------------------------------------------
+// JNI locks on java objects
+// NOTE: must use heavy weight monitor to handle jni monitor enter
+void ObjectSynchronizer::jni_enter(Handle obj, TRAPS) { // possible entry from jni enter
+ // the current locking is from JNI instead of Java code
+ TEVENT (jni_enter) ;
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+ THREAD->set_current_pending_monitor_is_from_java(false);
+ ObjectSynchronizer::inflate(THREAD, obj())->enter(THREAD);
+ THREAD->set_current_pending_monitor_is_from_java(true);
+}
+
+// NOTE: must use heavy weight monitor to handle jni monitor enter
+bool ObjectSynchronizer::jni_try_enter(Handle obj, Thread* THREAD) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
}
- void wait_reenter_end(ObjectMonitor *mon) {
- JavaThread *jt = (JavaThread *)this->_thread;
- JavaThreadBlockedOnMonitorEnterState::wait_reenter_end(jt, _active);
+ ObjectMonitor* monitor = ObjectSynchronizer::inflate_helper(obj());
+ return monitor->try_enter(THREAD);
+}
+
+
+// NOTE: must use heavy weight monitor to handle jni monitor exit
+void ObjectSynchronizer::jni_exit(oop obj, Thread* THREAD) {
+ TEVENT (jni_exit) ;
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ }
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+
+ ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj);
+ // If this thread has locked the object, exit the monitor. Note: can't use
+ // monitor->check(CHECK); must exit even if an exception is pending.
+ if (monitor->check(THREAD)) {
+ monitor->exit(THREAD);
}
-};
+}
+
+// -----------------------------------------------------------------------------
+// Internal VM locks on java objects
+// standard constructor, allows locking failures
+ObjectLocker::ObjectLocker(Handle obj, Thread* thread, bool doLock) {
+ _dolock = doLock;
+ _thread = thread;
+ debug_only(if (StrictSafepointChecks) _thread->check_for_valid_safepoint_state(false);)
+ _obj = obj;
-enum ManifestConstants {
- ClearResponsibleAtSTW = 0,
- MaximumRecheckInterval = 1000
-} ;
+ if (_dolock) {
+ TEVENT (ObjectLocker) ;
+
+ ObjectSynchronizer::fast_enter(_obj, &_lock, false, _thread);
+ }
+}
+
+ObjectLocker::~ObjectLocker() {
+ if (_dolock) {
+ ObjectSynchronizer::fast_exit(_obj(), &_lock, _thread);
+ }
+}
-#undef TEVENT
-#define TEVENT(nom) {if (SyncVerbose) FEVENT(nom); }
+// -----------------------------------------------------------------------------
+// Wait/Notify/NotifyAll
+// NOTE: must use heavy weight monitor to handle wait()
+void ObjectSynchronizer::wait(Handle obj, jlong millis, TRAPS) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+ if (millis < 0) {
+ TEVENT (wait - throw IAX) ;
+ THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
+ }
+ ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
+ DTRACE_MONITOR_WAIT_PROBE(monitor, obj(), THREAD, millis);
+ monitor->wait(millis, true, THREAD);
+
+ /* This dummy call is in place to get around dtrace bug 6254741. Once
+ that's fixed we can uncomment the following line and remove the call */
+ // DTRACE_MONITOR_PROBE(waited, monitor, obj(), THREAD);
+ dtrace_waited_probe(monitor, obj, THREAD);
+}
-#define FEVENT(nom) { static volatile int ctr = 0 ; int v = ++ctr ; if ((v & (v-1)) == 0) { ::printf (#nom " : %d \n", v); ::fflush(stdout); }}
+void ObjectSynchronizer::waitUninterruptibly (Handle obj, jlong millis, TRAPS) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+ if (millis < 0) {
+ TEVENT (wait - throw IAX) ;
+ THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
+ }
+ ObjectSynchronizer::inflate(THREAD, obj()) -> wait(millis, false, THREAD) ;
+}
+
+void ObjectSynchronizer::notify(Handle obj, TRAPS) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
-#undef TEVENT
-#define TEVENT(nom) {;}
+ markOop mark = obj->mark();
+ if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
+ return;
+ }
+ ObjectSynchronizer::inflate(THREAD, obj())->notify(THREAD);
+}
+// NOTE: see comment of notify()
+void ObjectSynchronizer::notifyall(Handle obj, TRAPS) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(obj, false, THREAD);
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+
+ markOop mark = obj->mark();
+ if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
+ return;
+ }
+ ObjectSynchronizer::inflate(THREAD, obj())->notifyAll(THREAD);
+}
+
+// -----------------------------------------------------------------------------
+// Hash Code handling
+//
// Performance concern:
// OrderAccess::storestore() calls release() which STs 0 into the global volatile
// OrderAccess::Dummy variable. This store is unnecessary for correctness.
@@ -188,44 +414,73 @@
static int MonitorScavengeThreshold = 1000000 ;
static volatile int ForceMonitorScavenge = 0 ; // Scavenge required and pending
-
-// Tunables ...
-// The knob* variables are effectively final. Once set they should
-// never be modified hence. Consider using __read_mostly with GCC.
+static markOop ReadStableMark (oop obj) {
+ markOop mark = obj->mark() ;
+ if (!mark->is_being_inflated()) {
+ return mark ; // normal fast-path return
+ }
-static int Knob_LogSpins = 0 ; // enable jvmstat tally for spins
-static int Knob_HandOff = 0 ;
-static int Knob_Verbose = 0 ;
-static int Knob_ReportSettings = 0 ;
+ int its = 0 ;
+ for (;;) {
+ markOop mark = obj->mark() ;
+ if (!mark->is_being_inflated()) {
+ return mark ; // normal fast-path return
+ }
+
+ // The object is being inflated by some other thread.
+ // The caller of ReadStableMark() must wait for inflation to complete.
+ // Avoid live-lock
+ // TODO: consider calling SafepointSynchronize::do_call_back() while
+ // spinning to see if there's a safepoint pending. If so, immediately
+ // yielding or blocking would be appropriate. Avoid spinning while
+ // there is a safepoint pending.
+ // TODO: add inflation contention performance counters.
+ // TODO: restrict the aggregate number of spinners.
-static int Knob_SpinLimit = 5000 ; // derived by an external tool -
-static int Knob_SpinBase = 0 ; // Floor AKA SpinMin
-static int Knob_SpinBackOff = 0 ; // spin-loop backoff
-static int Knob_CASPenalty = -1 ; // Penalty for failed CAS
-static int Knob_OXPenalty = -1 ; // Penalty for observed _owner change
-static int Knob_SpinSetSucc = 1 ; // spinners set the _succ field
-static int Knob_SpinEarly = 1 ;
-static int Knob_SuccEnabled = 1 ; // futile wake throttling
-static int Knob_SuccRestrict = 0 ; // Limit successors + spinners to at-most-one
-static int Knob_MaxSpinners = -1 ; // Should be a function of # CPUs
-static int Knob_Bonus = 100 ; // spin success bonus
-static int Knob_BonusB = 100 ; // spin success bonus
-static int Knob_Penalty = 200 ; // spin failure penalty
-static int Knob_Poverty = 1000 ;
-static int Knob_SpinAfterFutile = 1 ; // Spin after returning from park()
-static int Knob_FixedSpin = 0 ;
-static int Knob_OState = 3 ; // Spinner checks thread state of _owner
-static int Knob_UsePause = 1 ;
-static int Knob_ExitPolicy = 0 ;
-static int Knob_PreSpin = 10 ; // 20-100 likely better
-static int Knob_ResetEvent = 0 ;
-static int BackOffMask = 0 ;
-
-static int Knob_FastHSSEC = 0 ;
-static int Knob_MoveNotifyee = 2 ; // notify() - disposition of notifyee
-static int Knob_QMode = 0 ; // EntryList-cxq policy - queue discipline
-static volatile int InitDone = 0 ;
-
+ ++its ;
+ if (its > 10000 || !os::is_MP()) {
+ if (its & 1) {
+ os::NakedYield() ;
+ TEVENT (Inflate: INFLATING - yield) ;
+ } else {
+ // Note that the following code attenuates the livelock problem but is not
+ // a complete remedy. A more complete solution would require that the inflating
+ // thread hold the associated inflation lock. The following code simply restricts
+ // the number of spinners to at most one. We'll have N-2 threads blocked
+ // on the inflationlock, 1 thread holding the inflation lock and using
+ // a yield/park strategy, and 1 thread in the midst of inflation.
+ // A more refined approach would be to change the encoding of INFLATING
+ // to allow encapsulation of a native thread pointer. Threads waiting for
+ // inflation to complete would use CAS to push themselves onto a singly linked
+ // list rooted at the markword. Once enqueued, they'd loop, checking a per-thread flag
+ // and calling park(). When inflation was complete the thread that accomplished inflation
+ // would detach the list and set the markword to inflated with a single CAS and
+ // then for each thread on the list, set the flag and unpark() the thread.
+ // This is conceptually similar to muxAcquire-muxRelease, except that muxRelease
+ // wakes at most one thread whereas we need to wake the entire list.
+ int ix = (intptr_t(obj) >> 5) & (NINFLATIONLOCKS-1) ;
+ int YieldThenBlock = 0 ;
+ assert (ix >= 0 && ix < NINFLATIONLOCKS, "invariant") ;
+ assert ((NINFLATIONLOCKS & (NINFLATIONLOCKS-1)) == 0, "invariant") ;
+ Thread::muxAcquire (InflationLocks + ix, "InflationLock") ;
+ while (obj->mark() == markOopDesc::INFLATING()) {
+ // Beware: NakedYield() is advisory and has almost no effect on some platforms
+ // so we periodically call Self->_ParkEvent->park(1).
+ // We use a mixed spin/yield/block mechanism.
+ if ((YieldThenBlock++) >= 16) {
+ Thread::current()->_ParkEvent->park(1) ;
+ } else {
+ os::NakedYield() ;
+ }
+ }
+ Thread::muxRelease (InflationLocks + ix ) ;
+ TEVENT (Inflate: INFLATING - yield/park) ;
+ }
+ } else {
+ SpinPause() ; // SMP-polite spinning
+ }
+ }
+}
// hashCode() generation :
//
@@ -290,416 +545,272 @@
TEVENT (hashCode: GENERATE) ;
return value;
}
+//
+intptr_t ObjectSynchronizer::FastHashCode (Thread * Self, oop obj) {
+ if (UseBiasedLocking) {
+ // NOTE: many places throughout the JVM do not expect a safepoint
+ // to be taken here, in particular most operations on perm gen
+ // objects. However, we only ever bias Java instances and all of
+ // the call sites of identity_hash that might revoke biases have
+ // been checked to make sure they can handle a safepoint. The
+ // added check of the bias pattern is to avoid useless calls to
+ // thread-local storage.
+ if (obj->mark()->has_bias_pattern()) {
+ // Box and unbox the raw reference just in case we cause a STW safepoint.
+ Handle hobj (Self, obj) ;
+ // Relaxing assertion for bug 6320749.
+ assert (Universe::verify_in_progress() ||
+ !SafepointSynchronize::is_at_safepoint(),
+ "biases should not be seen by VM thread here");
+ BiasedLocking::revoke_and_rebias(hobj, false, JavaThread::current());
+ obj = hobj() ;
+ assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+ }
-void BasicLock::print_on(outputStream* st) const {
- st->print("monitor");
+ // hashCode() is a heap mutator ...
+ // Relaxing assertion for bug 6320749.
+ assert (Universe::verify_in_progress() ||
+ !SafepointSynchronize::is_at_safepoint(), "invariant") ;
+ assert (Universe::verify_in_progress() ||
+ Self->is_Java_thread() , "invariant") ;
+ assert (Universe::verify_in_progress() ||
+ ((JavaThread *)Self)->thread_state() != _thread_blocked, "invariant") ;
+
+ ObjectMonitor* monitor = NULL;
+ markOop temp, test;
+ intptr_t hash;
+ markOop mark = ReadStableMark (obj);
+
+ // object should remain ineligible for biased locking
+ assert (!mark->has_bias_pattern(), "invariant") ;
+
+ if (mark->is_neutral()) {
+ hash = mark->hash(); // this is a normal header
+ if (hash) { // if it has hash, just return it
+ return hash;
+ }
+ hash = get_next_hash(Self, obj); // allocate a new hash code
+ temp = mark->copy_set_hash(hash); // merge the hash code into header
+ // use (machine word version) atomic operation to install the hash
+ test = (markOop) Atomic::cmpxchg_ptr(temp, obj->mark_addr(), mark);
+ if (test == mark) {
+ return hash;
+ }
+ // If atomic operation failed, we must inflate the header
+ // into heavy weight monitor. We could add more code here
+ // for fast path, but it does not worth the complexity.
+ } else if (mark->has_monitor()) {
+ monitor = mark->monitor();
+ temp = monitor->header();
+ assert (temp->is_neutral(), "invariant") ;
+ hash = temp->hash();
+ if (hash) {
+ return hash;
+ }
+ // Skip to the following code to reduce code size
+ } else if (Self->is_lock_owned((address)mark->locker())) {
+ temp = mark->displaced_mark_helper(); // this is a lightweight monitor owned
+ assert (temp->is_neutral(), "invariant") ;
+ hash = temp->hash(); // by current thread, check if the displaced
+ if (hash) { // header contains hash code
+ return hash;
+ }
+ // WARNING:
+ // The displaced header is strictly immutable.
+ // It can NOT be changed in ANY cases. So we have
+ // to inflate the header into heavyweight monitor
+ // even the current thread owns the lock. The reason
+ // is the BasicLock (stack slot) will be asynchronously
+ // read by other threads during the inflate() function.
+ // Any change to stack may not propagate to other threads
+ // correctly.
+ }
+
+ // Inflate the monitor to set hash code
+ monitor = ObjectSynchronizer::inflate(Self, obj);
+ // Load displaced header and check it has hash code
+ mark = monitor->header();
+ assert (mark->is_neutral(), "invariant") ;
+ hash = mark->hash();
+ if (hash == 0) {
+ hash = get_next_hash(Self, obj);
+ temp = mark->copy_set_hash(hash); // merge hash code into header
+ assert (temp->is_neutral(), "invariant") ;
+ test = (markOop) Atomic::cmpxchg_ptr(temp, monitor, mark);
+ if (test != mark) {
+ // The only update to the header in the monitor (outside GC)
+ // is install the hash code. If someone add new usage of
+ // displaced header, please update this code
+ hash = test->hash();
+ assert (test->is_neutral(), "invariant") ;
+ assert (hash != 0, "Trivial unexpected object/monitor header usage.");
+ }
+ }
+ // We finally get the hash
+ return hash;
}
-void BasicLock::move_to(oop obj, BasicLock* dest) {
- // Check to see if we need to inflate the lock. This is only needed
- // if an object is locked using "this" lightweight monitor. In that
- // case, the displaced_header() is unlocked, because the
- // displaced_header() contains the header for the originally unlocked
- // object. However the object could have already been inflated. But it
- // does not matter, the inflation will just a no-op. For other cases,
- // the displaced header will be either 0x0 or 0x3, which are location
- // independent, therefore the BasicLock is free to move.
- //
- // During OSR we may need to relocate a BasicLock (which contains a
- // displaced word) from a location in an interpreter frame to a
- // new location in a compiled frame. "this" refers to the source
- // basiclock in the interpreter frame. "dest" refers to the destination
- // basiclock in the new compiled frame. We *always* inflate in move_to().
- // The always-Inflate policy works properly, but in 1.5.0 it can sometimes
- // cause performance problems in code that makes heavy use of a small # of
- // uncontended locks. (We'd inflate during OSR, and then sync performance
- // would subsequently plummet because the thread would be forced thru the slow-path).
- // This problem has been made largely moot on IA32 by inlining the inflated fast-path
- // operations in Fast_Lock and Fast_Unlock in i486.ad.
- //
- // Note that there is a way to safely swing the object's markword from
- // one stack location to another. This avoids inflation. Obviously,
- // we need to ensure that both locations refer to the current thread's stack.
- // There are some subtle concurrency issues, however, and since the benefit is
- // is small (given the support for inflated fast-path locking in the fast_lock, etc)
- // we'll leave that optimization for another time.
+// Deprecated -- use FastHashCode() instead.
- if (displaced_header()->is_neutral()) {
- ObjectSynchronizer::inflate_helper(obj);
- // WARNING: We can not put check here, because the inflation
- // will not update the displaced header. Once BasicLock is inflated,
- // no one should ever look at its content.
- } else {
- // Typically the displaced header will be 0 (recursive stack lock) or
- // unused_mark. Naively we'd like to assert that the displaced mark
- // value is either 0, neutral, or 3. But with the advent of the
- // store-before-CAS avoidance in fast_lock/compiler_lock_object
- // we can find any flavor mark in the displaced mark.
- }
-// [RGV] The next line appears to do nothing!
- intptr_t dh = (intptr_t) displaced_header();
- dest->set_displaced_header(displaced_header());
+intptr_t ObjectSynchronizer::identity_hash_value_for(Handle obj) {
+ return FastHashCode (Thread::current(), obj()) ;
}
-// -----------------------------------------------------------------------------
-// standard constructor, allows locking failures
-ObjectLocker::ObjectLocker(Handle obj, Thread* thread, bool doLock) {
- _dolock = doLock;
- _thread = thread;
- debug_only(if (StrictSafepointChecks) _thread->check_for_valid_safepoint_state(false);)
- _obj = obj;
+bool ObjectSynchronizer::current_thread_holds_lock(JavaThread* thread,
+ Handle h_obj) {
+ if (UseBiasedLocking) {
+ BiasedLocking::revoke_and_rebias(h_obj, false, thread);
+ assert(!h_obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+
+ assert(thread == JavaThread::current(), "Can only be called on current thread");
+ oop obj = h_obj();
+
+ markOop mark = ReadStableMark (obj) ;
- if (_dolock) {
- TEVENT (ObjectLocker) ;
-
- ObjectSynchronizer::fast_enter(_obj, &_lock, false, _thread);
+ // Uncontended case, header points to stack
+ if (mark->has_locker()) {
+ return thread->is_lock_owned((address)mark->locker());
}
-}
-
-ObjectLocker::~ObjectLocker() {
- if (_dolock) {
- ObjectSynchronizer::fast_exit(_obj(), &_lock, _thread);
+ // Contended case, header points to ObjectMonitor (tagged pointer)
+ if (mark->has_monitor()) {
+ ObjectMonitor* monitor = mark->monitor();
+ return monitor->is_entered(thread) != 0 ;
}
+ // Unlocked case, header in place
+ assert(mark->is_neutral(), "sanity check");
+ return false;
}
-// -----------------------------------------------------------------------------
+// Be aware of this method could revoke bias of the lock object.
+// This method querys the ownership of the lock handle specified by 'h_obj'.
+// If the current thread owns the lock, it returns owner_self. If no
+// thread owns the lock, it returns owner_none. Otherwise, it will return
+// ower_other.
+ObjectSynchronizer::LockOwnership ObjectSynchronizer::query_lock_ownership
+(JavaThread *self, Handle h_obj) {
+ // The caller must beware this method can revoke bias, and
+ // revocation can result in a safepoint.
+ assert (!SafepointSynchronize::is_at_safepoint(), "invariant") ;
+ assert (self->thread_state() != _thread_blocked , "invariant") ;
+ // Possible mark states: neutral, biased, stack-locked, inflated
+
+ if (UseBiasedLocking && h_obj()->mark()->has_bias_pattern()) {
+ // CASE: biased
+ BiasedLocking::revoke_and_rebias(h_obj, false, self);
+ assert(!h_obj->mark()->has_bias_pattern(),
+ "biases should be revoked by now");
+ }
-PerfCounter * ObjectSynchronizer::_sync_Inflations = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_Deflations = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_ContendedLockAttempts = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_FutileWakeups = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_Parks = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_EmptyNotifications = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_Notifications = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_PrivateA = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_PrivateB = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_SlowExit = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_SlowEnter = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_SlowNotify = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_SlowNotifyAll = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_FailedSpins = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_SuccessfulSpins = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_MonInCirculation = NULL ;
-PerfCounter * ObjectSynchronizer::_sync_MonScavenged = NULL ;
-PerfLongVariable * ObjectSynchronizer::_sync_MonExtant = NULL ;
+ assert(self == JavaThread::current(), "Can only be called on current thread");
+ oop obj = h_obj();
+ markOop mark = ReadStableMark (obj) ;
+
+ // CASE: stack-locked. Mark points to a BasicLock on the owner's stack.
+ if (mark->has_locker()) {
+ return self->is_lock_owned((address)mark->locker()) ?
+ owner_self : owner_other;
+ }
-// One-shot global initialization for the sync subsystem.
-// We could also defer initialization and initialize on-demand
-// the first time we call inflate(). Initialization would
-// be protected - like so many things - by the MonitorCache_lock.
+ // CASE: inflated. Mark (tagged pointer) points to an objectMonitor.
+ // The Object:ObjectMonitor relationship is stable as long as we're
+ // not at a safepoint.
+ if (mark->has_monitor()) {
+ void * owner = mark->monitor()->_owner ;
+ if (owner == NULL) return owner_none ;
+ return (owner == self ||
+ self->is_lock_owned((address)owner)) ? owner_self : owner_other;
+ }
+
+ // CASE: neutral
+ assert(mark->is_neutral(), "sanity check");
+ return owner_none ; // it's unlocked
+}
-void ObjectSynchronizer::Initialize () {
- static int InitializationCompleted = 0 ;
- assert (InitializationCompleted == 0, "invariant") ;
- InitializationCompleted = 1 ;
- if (UsePerfData) {
- EXCEPTION_MARK ;
- #define NEWPERFCOUNTER(n) {n = PerfDataManager::create_counter(SUN_RT, #n, PerfData::U_Events,CHECK); }
- #define NEWPERFVARIABLE(n) {n = PerfDataManager::create_variable(SUN_RT, #n, PerfData::U_Events,CHECK); }
- NEWPERFCOUNTER(_sync_Inflations) ;
- NEWPERFCOUNTER(_sync_Deflations) ;
- NEWPERFCOUNTER(_sync_ContendedLockAttempts) ;
- NEWPERFCOUNTER(_sync_FutileWakeups) ;
- NEWPERFCOUNTER(_sync_Parks) ;
- NEWPERFCOUNTER(_sync_EmptyNotifications) ;
- NEWPERFCOUNTER(_sync_Notifications) ;
- NEWPERFCOUNTER(_sync_SlowEnter) ;
- NEWPERFCOUNTER(_sync_SlowExit) ;
- NEWPERFCOUNTER(_sync_SlowNotify) ;
- NEWPERFCOUNTER(_sync_SlowNotifyAll) ;
- NEWPERFCOUNTER(_sync_FailedSpins) ;
- NEWPERFCOUNTER(_sync_SuccessfulSpins) ;
- NEWPERFCOUNTER(_sync_PrivateA) ;
- NEWPERFCOUNTER(_sync_PrivateB) ;
- NEWPERFCOUNTER(_sync_MonInCirculation) ;
- NEWPERFCOUNTER(_sync_MonScavenged) ;
- NEWPERFVARIABLE(_sync_MonExtant) ;
- #undef NEWPERFCOUNTER
+// FIXME: jvmti should call this
+JavaThread* ObjectSynchronizer::get_lock_owner(Handle h_obj, bool doLock) {
+ if (UseBiasedLocking) {
+ if (SafepointSynchronize::is_at_safepoint()) {
+ BiasedLocking::revoke_at_safepoint(h_obj);
+ } else {
+ BiasedLocking::revoke_and_rebias(h_obj, false, JavaThread::current());
+ }
+ assert(!h_obj->mark()->has_bias_pattern(), "biases should be revoked by now");
+ }
+
+ oop obj = h_obj();
+ address owner = NULL;
+
+ markOop mark = ReadStableMark (obj) ;
+
+ // Uncontended case, header points to stack
+ if (mark->has_locker()) {
+ owner = (address) mark->locker();
+ }
+
+ // Contended case, header points to ObjectMonitor (tagged pointer)
+ if (mark->has_monitor()) {
+ ObjectMonitor* monitor = mark->monitor();
+ assert(monitor != NULL, "monitor should be non-null");
+ owner = (address) monitor->owner();
+ }
+
+ if (owner != NULL) {
+ return Threads::owning_thread_from_monitor_owner(owner, doLock);
+ }
+
+ // Unlocked case, header in place
+ // Cannot have assertion since this object may have been
+ // locked by another thread when reaching here.
+ // assert(mark->is_neutral(), "sanity check");
+
+ return NULL;
+}
+// Visitors ...
+
+void ObjectSynchronizer::monitors_iterate(MonitorClosure* closure) {
+ ObjectMonitor* block = gBlockList;
+ ObjectMonitor* mid;
+ while (block) {
+ assert(block->object() == CHAINMARKER, "must be a block header");
+ for (int i = _BLOCKSIZE - 1; i > 0; i--) {
+ mid = block + i;
+ oop object = (oop) mid->object();
+ if (object != NULL) {
+ closure->do_monitor(mid);
+ }
+ }
+ block = (ObjectMonitor*) block->FreeNext;
}
}
-// Compile-time asserts
-// When possible, it's better to catch errors deterministically at
-// compile-time than at runtime. The down-side to using compile-time
-// asserts is that error message -- often something about negative array
-// indices -- is opaque.
-
-#define CTASSERT(x) { int tag[1-(2*!(x))]; printf ("Tag @" INTPTR_FORMAT "\n", (intptr_t)tag); }
-
-void ObjectMonitor::ctAsserts() {
- CTASSERT(offset_of (ObjectMonitor, _header) == 0);
-}
-
-static int Adjust (volatile int * adr, int dx) {
- int v ;
- for (v = *adr ; Atomic::cmpxchg (v + dx, adr, v) != v; v = *adr) ;
- return v ;
-}
-
-// Ad-hoc mutual exclusion primitives: SpinLock and Mux
-//
-// We employ SpinLocks _only for low-contention, fixed-length
-// short-duration critical sections where we're concerned
-// about native mutex_t or HotSpot Mutex:: latency.
-// The mux construct provides a spin-then-block mutual exclusion
-// mechanism.
-//
-// Testing has shown that contention on the ListLock guarding gFreeList
-// is common. If we implement ListLock as a simple SpinLock it's common
-// for the JVM to devolve to yielding with little progress. This is true
-// despite the fact that the critical sections protected by ListLock are
-// extremely short.
-//
-// TODO-FIXME: ListLock should be of type SpinLock.
-// We should make this a 1st-class type, integrated into the lock
-// hierarchy as leaf-locks. Critically, the SpinLock structure
-// should have sufficient padding to avoid false-sharing and excessive
-// cache-coherency traffic.
-
-
-typedef volatile int SpinLockT ;
-
-void Thread::SpinAcquire (volatile int * adr, const char * LockName) {
- if (Atomic::cmpxchg (1, adr, 0) == 0) {
- return ; // normal fast-path return
- }
-
- // Slow-path : We've encountered contention -- Spin/Yield/Block strategy.
- TEVENT (SpinAcquire - ctx) ;
- int ctr = 0 ;
- int Yields = 0 ;
- for (;;) {
- while (*adr != 0) {
- ++ctr ;
- if ((ctr & 0xFFF) == 0 || !os::is_MP()) {
- if (Yields > 5) {
- // Consider using a simple NakedSleep() instead.
- // Then SpinAcquire could be called by non-JVM threads
- Thread::current()->_ParkEvent->park(1) ;
- } else {
- os::NakedYield() ;
- ++Yields ;
- }
- } else {
- SpinPause() ;
- }
- }
- if (Atomic::cmpxchg (1, adr, 0) == 0) return ;
- }
-}
-
-void Thread::SpinRelease (volatile int * adr) {
- assert (*adr != 0, "invariant") ;
- OrderAccess::fence() ; // guarantee at least release consistency.
- // Roach-motel semantics.
- // It's safe if subsequent LDs and STs float "up" into the critical section,
- // but prior LDs and STs within the critical section can't be allowed
- // to reorder or float past the ST that releases the lock.
- *adr = 0 ;
+// Get the next block in the block list.
+static inline ObjectMonitor* next(ObjectMonitor* block) {
+ assert(block->object() == CHAINMARKER, "must be a block header");
+ block = block->FreeNext ;
+ assert(block == NULL || block->object() == CHAINMARKER, "must be a block header");
+ return block;
}
-// muxAcquire and muxRelease:
-//
-// * muxAcquire and muxRelease support a single-word lock-word construct.
-// The LSB of the word is set IFF the lock is held.
-// The remainder of the word points to the head of a singly-linked list
-// of threads blocked on the lock.
-//
-// * The current implementation of muxAcquire-muxRelease uses its own
-// dedicated Thread._MuxEvent instance. If we're interested in
-// minimizing the peak number of extant ParkEvent instances then
-// we could eliminate _MuxEvent and "borrow" _ParkEvent as long
-// as certain invariants were satisfied. Specifically, care would need
-// to be taken with regards to consuming unpark() "permits".
-// A safe rule of thumb is that a thread would never call muxAcquire()
-// if it's enqueued (cxq, EntryList, WaitList, etc) and will subsequently
-// park(). Otherwise the _ParkEvent park() operation in muxAcquire() could
-// consume an unpark() permit intended for monitorenter, for instance.
-// One way around this would be to widen the restricted-range semaphore
-// implemented in park(). Another alternative would be to provide
-// multiple instances of the PlatformEvent() for each thread. One
-// instance would be dedicated to muxAcquire-muxRelease, for instance.
-//
-// * Usage:
-// -- Only as leaf locks
-// -- for short-term locking only as muxAcquire does not perform
-// thread state transitions.
-//
-// Alternatives:
-// * We could implement muxAcquire and muxRelease with MCS or CLH locks
-// but with parking or spin-then-park instead of pure spinning.
-// * Use Taura-Oyama-Yonenzawa locks.
-// * It's possible to construct a 1-0 lock if we encode the lockword as
-// (List,LockByte). Acquire will CAS the full lockword while Release
-// will STB 0 into the LockByte. The 1-0 scheme admits stranding, so
-// acquiring threads use timers (ParkTimed) to detect and recover from
-// the stranding window. Thread/Node structures must be aligned on 256-byte
-// boundaries by using placement-new.
-// * Augment MCS with advisory back-link fields maintained with CAS().
-// Pictorially: LockWord -> T1 <-> T2 <-> T3 <-> ... <-> Tn <-> Owner.
-// The validity of the backlinks must be ratified before we trust the value.
-// If the backlinks are invalid the exiting thread must back-track through the
-// the forward links, which are always trustworthy.
-// * Add a successor indication. The LockWord is currently encoded as
-// (List, LOCKBIT:1). We could also add a SUCCBIT or an explicit _succ variable
-// to provide the usual futile-wakeup optimization.
-// See RTStt for details.
-// * Consider schedctl.sc_nopreempt to cover the critical section.
-//
-
-typedef volatile intptr_t MutexT ; // Mux Lock-word
-enum MuxBits { LOCKBIT = 1 } ;
-
-void Thread::muxAcquire (volatile intptr_t * Lock, const char * LockName) {
- intptr_t w = Atomic::cmpxchg_ptr (LOCKBIT, Lock, 0) ;
- if (w == 0) return ;
- if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- return ;
- }
-
- TEVENT (muxAcquire - Contention) ;
- ParkEvent * const Self = Thread::current()->_MuxEvent ;
- assert ((intptr_t(Self) & LOCKBIT) == 0, "invariant") ;
- for (;;) {
- int its = (os::is_MP() ? 100 : 0) + 1 ;
-
- // Optional spin phase: spin-then-park strategy
- while (--its >= 0) {
- w = *Lock ;
- if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- return ;
- }
- }
-
- Self->reset() ;
- Self->OnList = intptr_t(Lock) ;
- // The following fence() isn't _strictly necessary as the subsequent
- // CAS() both serializes execution and ratifies the fetched *Lock value.
- OrderAccess::fence();
- for (;;) {
- w = *Lock ;
- if ((w & LOCKBIT) == 0) {
- if (Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- Self->OnList = 0 ; // hygiene - allows stronger asserts
- return ;
- }
- continue ; // Interference -- *Lock changed -- Just retry
- }
- assert (w & LOCKBIT, "invariant") ;
- Self->ListNext = (ParkEvent *) (w & ~LOCKBIT );
- if (Atomic::cmpxchg_ptr (intptr_t(Self)|LOCKBIT, Lock, w) == w) break ;
- }
-
- while (Self->OnList != 0) {
- Self->park() ;
- }
- }
-}
-
-void Thread::muxAcquireW (volatile intptr_t * Lock, ParkEvent * ev) {
- intptr_t w = Atomic::cmpxchg_ptr (LOCKBIT, Lock, 0) ;
- if (w == 0) return ;
- if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- return ;
- }
-
- TEVENT (muxAcquire - Contention) ;
- ParkEvent * ReleaseAfter = NULL ;
- if (ev == NULL) {
- ev = ReleaseAfter = ParkEvent::Allocate (NULL) ;
- }
- assert ((intptr_t(ev) & LOCKBIT) == 0, "invariant") ;
- for (;;) {
- guarantee (ev->OnList == 0, "invariant") ;
- int its = (os::is_MP() ? 100 : 0) + 1 ;
-
- // Optional spin phase: spin-then-park strategy
- while (--its >= 0) {
- w = *Lock ;
- if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- if (ReleaseAfter != NULL) {
- ParkEvent::Release (ReleaseAfter) ;
- }
- return ;
+void ObjectSynchronizer::oops_do(OopClosure* f) {
+ assert(SafepointSynchronize::is_at_safepoint(), "must be at safepoint");
+ for (ObjectMonitor* block = gBlockList; block != NULL; block = next(block)) {
+ assert(block->object() == CHAINMARKER, "must be a block header");
+ for (int i = 1; i < _BLOCKSIZE; i++) {
+ ObjectMonitor* mid = &block[i];
+ if (mid->object() != NULL) {
+ f->do_oop((oop*)mid->object_addr());
}
}
-
- ev->reset() ;
- ev->OnList = intptr_t(Lock) ;
- // The following fence() isn't _strictly necessary as the subsequent
- // CAS() both serializes execution and ratifies the fetched *Lock value.
- OrderAccess::fence();
- for (;;) {
- w = *Lock ;
- if ((w & LOCKBIT) == 0) {
- if (Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
- ev->OnList = 0 ;
- // We call ::Release while holding the outer lock, thus
- // artificially lengthening the critical section.
- // Consider deferring the ::Release() until the subsequent unlock(),
- // after we've dropped the outer lock.
- if (ReleaseAfter != NULL) {
- ParkEvent::Release (ReleaseAfter) ;
- }
- return ;
- }
- continue ; // Interference -- *Lock changed -- Just retry
- }
- assert (w & LOCKBIT, "invariant") ;
- ev->ListNext = (ParkEvent *) (w & ~LOCKBIT );
- if (Atomic::cmpxchg_ptr (intptr_t(ev)|LOCKBIT, Lock, w) == w) break ;
- }
-
- while (ev->OnList != 0) {
- ev->park() ;
- }
}
}
-// Release() must extract a successor from the list and then wake that thread.
-// It can "pop" the front of the list or use a detach-modify-reattach (DMR) scheme
-// similar to that used by ParkEvent::Allocate() and ::Release(). DMR-based
-// Release() would :
-// (A) CAS() or swap() null to *Lock, releasing the lock and detaching the list.
-// (B) Extract a successor from the private list "in-hand"
-// (C) attempt to CAS() the residual back into *Lock over null.
-// If there were any newly arrived threads and the CAS() would fail.
-// In that case Release() would detach the RATs, re-merge the list in-hand
-// with the RATs and repeat as needed. Alternately, Release() might
-// detach and extract a successor, but then pass the residual list to the wakee.
-// The wakee would be responsible for reattaching and remerging before it
-// competed for the lock.
-//
-// Both "pop" and DMR are immune from ABA corruption -- there can be
-// multiple concurrent pushers, but only one popper or detacher.
-// This implementation pops from the head of the list. This is unfair,
-// but tends to provide excellent throughput as hot threads remain hot.
-// (We wake recently run threads first).
-void Thread::muxRelease (volatile intptr_t * Lock) {
- for (;;) {
- const intptr_t w = Atomic::cmpxchg_ptr (0, Lock, LOCKBIT) ;
- assert (w & LOCKBIT, "invariant") ;
- if (w == LOCKBIT) return ;
- ParkEvent * List = (ParkEvent *) (w & ~LOCKBIT) ;
- assert (List != NULL, "invariant") ;
- assert (List->OnList == intptr_t(Lock), "invariant") ;
- ParkEvent * nxt = List->ListNext ;
-
- // The following CAS() releases the lock and pops the head element.
- if (Atomic::cmpxchg_ptr (intptr_t(nxt), Lock, w) != w) {
- continue ;
- }
- List->OnList = 0 ;
- OrderAccess::fence() ;
- List->unpark () ;
- return ;
- }
-}
-
+// -----------------------------------------------------------------------------
// ObjectMonitor Lifecycle
// -----------------------
// Inflation unlinks monitors from the global gFreeList and
@@ -718,41 +829,7 @@
// -- assigned to an object. The object is inflated and the mark refers
// to the objectmonitor.
//
-// TODO-FIXME:
-//
-// * We currently protect the gFreeList with a simple lock.
-// An alternate lock-free scheme would be to pop elements from the gFreeList
-// with CAS. This would be safe from ABA corruption as long we only
-// recycled previously appearing elements onto the list in deflate_idle_monitors()
-// at STW-time. Completely new elements could always be pushed onto the gFreeList
-// with CAS. Elements that appeared previously on the list could only
-// be installed at STW-time.
-//
-// * For efficiency and to help reduce the store-before-CAS penalty
-// the objectmonitors on gFreeList or local free lists should be ready to install
-// with the exception of _header and _object. _object can be set after inflation.
-// In particular, keep all objectMonitors on a thread's private list in ready-to-install
-// state with m.Owner set properly.
-//
-// * We could all diffuse contention by using multiple global (FreeList, Lock)
-// pairs -- threads could use trylock() and a cyclic-scan strategy to search for
-// an unlocked free list.
-//
-// * Add lifecycle tags and assert()s.
-//
-// * Be more consistent about when we clear an objectmonitor's fields:
-// A. After extracting the objectmonitor from a free list.
-// B. After adding an objectmonitor to a free list.
-//
-ObjectMonitor * ObjectSynchronizer::gBlockList = NULL ;
-ObjectMonitor * volatile ObjectSynchronizer::gFreeList = NULL ;
-ObjectMonitor * volatile ObjectSynchronizer::gOmInUseList = NULL ;
-int ObjectSynchronizer::gOmInUseCount = 0;
-static volatile intptr_t ListLock = 0 ; // protects global monitor free-list cache
-static volatile int MonitorFreeCount = 0 ; // # on gFreeList
-static volatile int MonitorPopulation = 0 ; // # Extant -- in circulation
-#define CHAINMARKER ((oop)-1)
// Constraining monitor pool growth via MonitorBound ...
//
@@ -768,41 +845,8 @@
// we'll incur more safepoints, which are harmful to performance.
// See also: GuaranteedSafepointInterval
//
-// As noted elsewhere, the correct long-term solution is to deflate at
-// monitorexit-time, in which case the number of inflated objects is bounded
-// by the number of threads. That policy obviates the need for scavenging at
-// STW safepoint time. As an aside, scavenging can be time-consuming when the
-// # of extant monitors is large. Unfortunately there's a day-1 assumption baked
-// into much HotSpot code that the object::monitor relationship, once established
-// or observed, will remain stable except over potential safepoints.
-//
-// We can use either a blocking synchronous VM operation or an async VM operation.
-// -- If we use a blocking VM operation :
-// Calls to ScavengeCheck() should be inserted only into 'safe' locations in paths
-// that lead to ::inflate() or ::omAlloc().
-// Even though the safepoint will not directly induce GC, a GC might
-// piggyback on the safepoint operation, so the caller should hold no naked oops.
-// Furthermore, monitor::object relationships are NOT necessarily stable over this call
-// unless the caller has made provisions to "pin" the object to the monitor, say
-// by incrementing the monitor's _count field.
-// -- If we use a non-blocking asynchronous VM operation :
-// the constraints above don't apply. The safepoint will fire in the future
-// at a more convenient time. On the other hand the latency between posting and
-// running the safepoint introduces or admits "slop" or laxity during which the
-// monitor population can climb further above the threshold. The monitor population,
-// however, tends to converge asymptotically over time to a count that's slightly
-// above the target value specified by MonitorBound. That is, we avoid unbounded
-// growth, albeit with some imprecision.
-//
// The current implementation uses asynchronous VM operations.
//
-// Ideally we'd check if (MonitorPopulation > MonitorBound) in omAlloc()
-// immediately before trying to grow the global list via allocation.
-// If the predicate was true then we'd induce a synchronous safepoint, wait
-// for the safepoint to complete, and then again to allocate from the global
-// free list. This approach is much simpler and precise, admitting no "slop".
-// Unfortunately we can't safely safepoint in the midst of omAlloc(), so
-// instead we use asynchronous safepoints.
static void InduceScavenge (Thread * Self, const char * Whence) {
// Induce STW safepoint to trim monitors
@@ -812,7 +856,7 @@
// TODO: assert thread state is reasonable
if (ForceMonitorScavenge == 0 && Atomic::xchg (1, &ForceMonitorScavenge) == 0) {
- if (Knob_Verbose) {
+ if (ObjectMonitor::Knob_Verbose) {
::printf ("Monitor scavenge - Induced STW @%s (%d)\n", Whence, ForceMonitorScavenge) ;
::fflush(stdout) ;
}
@@ -822,7 +866,7 @@
// The VMThread will delete the op when completed.
VMThread::execute (new VM_ForceAsyncSafepoint()) ;
- if (Knob_Verbose) {
+ if (ObjectMonitor::Knob_Verbose) {
::printf ("Monitor scavenge - STW posted @%s (%d)\n", Whence, ForceMonitorScavenge) ;
::fflush(stdout) ;
}
@@ -844,7 +888,6 @@
assert(freetally == Self->omFreeCount, "free count off");
}
*/
-
ObjectMonitor * ATTR ObjectSynchronizer::omAlloc (Thread * Self) {
// A large MAXPRIVATE value reduces both list lock contention
// and list coherency traffic, but also tends to increase the
@@ -974,12 +1017,6 @@
// attempt failed. This doesn't allow unbounded #s of monitors to
// accumulate on a thread's free list.
//
-// In the future the usage of omRelease() might change and monitors
-// could migrate between free lists. In that case to avoid excessive
-// accumulation we could limit omCount to (omProvision*2), otherwise return
-// the objectMonitor to the global list. We should drain (return) in reasonable chunks.
-// That is, *not* one-at-a-time.
-
void ObjectSynchronizer::omRelease (Thread * Self, ObjectMonitor * m, bool fromPerThreadAlloc) {
guarantee (m->object() == NULL, "invariant") ;
@@ -1082,15 +1119,6 @@
TEVENT (omFlush) ;
}
-
-// Get the next block in the block list.
-static inline ObjectMonitor* next(ObjectMonitor* block) {
- assert(block->object() == CHAINMARKER, "must be a block header");
- block = block->FreeNext ;
- assert(block == NULL || block->object() == CHAINMARKER, "must be a block header");
- return block;
-}
-
// Fast path code shared by multiple functions
ObjectMonitor* ObjectSynchronizer::inflate_helper(oop obj) {
markOop mark = obj->mark();
@@ -1102,79 +1130,10 @@
return ObjectSynchronizer::inflate(Thread::current(), obj);
}
+
// Note that we could encounter some performance loss through false-sharing as
// multiple locks occupy the same $ line. Padding might be appropriate.
-#define NINFLATIONLOCKS 256
-static volatile intptr_t InflationLocks [NINFLATIONLOCKS] ;
-
-static markOop ReadStableMark (oop obj) {
- markOop mark = obj->mark() ;
- if (!mark->is_being_inflated()) {
- return mark ; // normal fast-path return
- }
-
- int its = 0 ;
- for (;;) {
- markOop mark = obj->mark() ;
- if (!mark->is_being_inflated()) {
- return mark ; // normal fast-path return
- }
-
- // The object is being inflated by some other thread.
- // The caller of ReadStableMark() must wait for inflation to complete.
- // Avoid live-lock
- // TODO: consider calling SafepointSynchronize::do_call_back() while
- // spinning to see if there's a safepoint pending. If so, immediately
- // yielding or blocking would be appropriate. Avoid spinning while
- // there is a safepoint pending.
- // TODO: add inflation contention performance counters.
- // TODO: restrict the aggregate number of spinners.
-
- ++its ;
- if (its > 10000 || !os::is_MP()) {
- if (its & 1) {
- os::NakedYield() ;
- TEVENT (Inflate: INFLATING - yield) ;
- } else {
- // Note that the following code attenuates the livelock problem but is not
- // a complete remedy. A more complete solution would require that the inflating
- // thread hold the associated inflation lock. The following code simply restricts
- // the number of spinners to at most one. We'll have N-2 threads blocked
- // on the inflationlock, 1 thread holding the inflation lock and using
- // a yield/park strategy, and 1 thread in the midst of inflation.
- // A more refined approach would be to change the encoding of INFLATING
- // to allow encapsulation of a native thread pointer. Threads waiting for
- // inflation to complete would use CAS to push themselves onto a singly linked
- // list rooted at the markword. Once enqueued, they'd loop, checking a per-thread flag
- // and calling park(). When inflation was complete the thread that accomplished inflation
- // would detach the list and set the markword to inflated with a single CAS and
- // then for each thread on the list, set the flag and unpark() the thread.
- // This is conceptually similar to muxAcquire-muxRelease, except that muxRelease
- // wakes at most one thread whereas we need to wake the entire list.
- int ix = (intptr_t(obj) >> 5) & (NINFLATIONLOCKS-1) ;
- int YieldThenBlock = 0 ;
- assert (ix >= 0 && ix < NINFLATIONLOCKS, "invariant") ;
- assert ((NINFLATIONLOCKS & (NINFLATIONLOCKS-1)) == 0, "invariant") ;
- Thread::muxAcquire (InflationLocks + ix, "InflationLock") ;
- while (obj->mark() == markOopDesc::INFLATING()) {
- // Beware: NakedYield() is advisory and has almost no effect on some platforms
- // so we periodically call Self->_ParkEvent->park(1).
- // We use a mixed spin/yield/block mechanism.
- if ((YieldThenBlock++) >= 16) {
- Thread::current()->_ParkEvent->park(1) ;
- } else {
- os::NakedYield() ;
- }
- }
- Thread::muxRelease (InflationLocks + ix ) ;
- TEVENT (Inflate: INFLATING - yield/park) ;
- }
- } else {
- SpinPause() ; // SMP-polite spinning
- }
- }
-}
ObjectMonitor * ATTR ObjectSynchronizer::inflate (Thread * Self, oop object) {
// Inflate mutates the heap ...
@@ -1242,7 +1201,7 @@
m->_Responsible = NULL ;
m->OwnerIsThread = 0 ;
m->_recursions = 0 ;
- m->_SpinDuration = Knob_SpinLimit ; // Consider: maintain by type/class
+ m->_SpinDuration = ObjectMonitor::Knob_SpinLimit ; // Consider: maintain by type/class
markOop cmp = (markOop) Atomic::cmpxchg_ptr (markOopDesc::INFLATING(), object->mark_addr(), mark) ;
if (cmp != mark) {
@@ -1302,7 +1261,7 @@
// Hopefully the performance counters are allocated on distinct cache lines
// to avoid false sharing on MP systems ...
- if (_sync_Inflations != NULL) _sync_Inflations->inc() ;
+ if (ObjectMonitor::_sync_Inflations != NULL) ObjectMonitor::_sync_Inflations->inc() ;
TEVENT(Inflate: overwrite stacklock) ;
if (TraceMonitorInflation) {
if (object->is_instance()) {
@@ -1335,7 +1294,7 @@
m->OwnerIsThread = 1 ;
m->_recursions = 0 ;
m->_Responsible = NULL ;
- m->_SpinDuration = Knob_SpinLimit ; // consider: keep metastats by type/class
+ m->_SpinDuration = ObjectMonitor::Knob_SpinLimit ; // consider: keep metastats by type/class
if (Atomic::cmpxchg_ptr (markOopDesc::encode(m), object->mark_addr(), mark) != mark) {
m->set_object (NULL) ;
@@ -1352,7 +1311,7 @@
// Hopefully the performance counters are allocated on distinct
// cache lines to avoid false sharing on MP systems ...
- if (_sync_Inflations != NULL) _sync_Inflations->inc() ;
+ if (ObjectMonitor::_sync_Inflations != NULL) ObjectMonitor::_sync_Inflations->inc() ;
TEVENT(Inflate: overwrite neutral) ;
if (TraceMonitorInflation) {
if (object->is_instance()) {
@@ -1366,547 +1325,9 @@
}
}
-
-// This the fast monitor enter. The interpreter and compiler use
-// some assembly copies of this code. Make sure update those code
-// if the following function is changed. The implementation is
-// extremely sensitive to race condition. Be careful.
-
-void ObjectSynchronizer::fast_enter(Handle obj, BasicLock* lock, bool attempt_rebias, TRAPS) {
- if (UseBiasedLocking) {
- if (!SafepointSynchronize::is_at_safepoint()) {
- BiasedLocking::Condition cond = BiasedLocking::revoke_and_rebias(obj, attempt_rebias, THREAD);
- if (cond == BiasedLocking::BIAS_REVOKED_AND_REBIASED) {
- return;
- }
- } else {
- assert(!attempt_rebias, "can not rebias toward VM thread");
- BiasedLocking::revoke_at_safepoint(obj);
- }
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- slow_enter (obj, lock, THREAD) ;
-}
-
-void ObjectSynchronizer::fast_exit(oop object, BasicLock* lock, TRAPS) {
- assert(!object->mark()->has_bias_pattern(), "should not see bias pattern here");
- // if displaced header is null, the previous enter is recursive enter, no-op
- markOop dhw = lock->displaced_header();
- markOop mark ;
- if (dhw == NULL) {
- // Recursive stack-lock.
- // Diagnostics -- Could be: stack-locked, inflating, inflated.
- mark = object->mark() ;
- assert (!mark->is_neutral(), "invariant") ;
- if (mark->has_locker() && mark != markOopDesc::INFLATING()) {
- assert(THREAD->is_lock_owned((address)mark->locker()), "invariant") ;
- }
- if (mark->has_monitor()) {
- ObjectMonitor * m = mark->monitor() ;
- assert(((oop)(m->object()))->mark() == mark, "invariant") ;
- assert(m->is_entered(THREAD), "invariant") ;
- }
- return ;
- }
-
- mark = object->mark() ;
-
- // If the object is stack-locked by the current thread, try to
- // swing the displaced header from the box back to the mark.
- if (mark == (markOop) lock) {
- assert (dhw->is_neutral(), "invariant") ;
- if ((markOop) Atomic::cmpxchg_ptr (dhw, object->mark_addr(), mark) == mark) {
- TEVENT (fast_exit: release stacklock) ;
- return;
- }
- }
-
- ObjectSynchronizer::inflate(THREAD, object)->exit (THREAD) ;
-}
-
-// This routine is used to handle interpreter/compiler slow case
-// We don't need to use fast path here, because it must have been
-// failed in the interpreter/compiler code.
-void ObjectSynchronizer::slow_enter(Handle obj, BasicLock* lock, TRAPS) {
- markOop mark = obj->mark();
- assert(!mark->has_bias_pattern(), "should not see bias pattern here");
-
- if (mark->is_neutral()) {
- // Anticipate successful CAS -- the ST of the displaced mark must
- // be visible <= the ST performed by the CAS.
- lock->set_displaced_header(mark);
- if (mark == (markOop) Atomic::cmpxchg_ptr(lock, obj()->mark_addr(), mark)) {
- TEVENT (slow_enter: release stacklock) ;
- return ;
- }
- // Fall through to inflate() ...
- } else
- if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
- assert(lock != mark->locker(), "must not re-lock the same lock");
- assert(lock != (BasicLock*)obj->mark(), "don't relock with same BasicLock");
- lock->set_displaced_header(NULL);
- return;
- }
-
-#if 0
- // The following optimization isn't particularly useful.
- if (mark->has_monitor() && mark->monitor()->is_entered(THREAD)) {
- lock->set_displaced_header (NULL) ;
- return ;
- }
-#endif
-
- // The object header will never be displaced to this lock,
- // so it does not matter what the value is, except that it
- // must be non-zero to avoid looking like a re-entrant lock,
- // and must not look locked either.
- lock->set_displaced_header(markOopDesc::unused_mark());
- ObjectSynchronizer::inflate(THREAD, obj())->enter(THREAD);
-}
-
-// This routine is used to handle interpreter/compiler slow case
-// We don't need to use fast path here, because it must have
-// failed in the interpreter/compiler code. Simply use the heavy
-// weight monitor should be ok, unless someone find otherwise.
-void ObjectSynchronizer::slow_exit(oop object, BasicLock* lock, TRAPS) {
- fast_exit (object, lock, THREAD) ;
-}
-
-// NOTE: must use heavy weight monitor to handle jni monitor enter
-void ObjectSynchronizer::jni_enter(Handle obj, TRAPS) { // possible entry from jni enter
- // the current locking is from JNI instead of Java code
- TEVENT (jni_enter) ;
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
- THREAD->set_current_pending_monitor_is_from_java(false);
- ObjectSynchronizer::inflate(THREAD, obj())->enter(THREAD);
- THREAD->set_current_pending_monitor_is_from_java(true);
-}
-
-// NOTE: must use heavy weight monitor to handle jni monitor enter
-bool ObjectSynchronizer::jni_try_enter(Handle obj, Thread* THREAD) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- ObjectMonitor* monitor = ObjectSynchronizer::inflate_helper(obj());
- return monitor->try_enter(THREAD);
-}
-
-
-// NOTE: must use heavy weight monitor to handle jni monitor exit
-void ObjectSynchronizer::jni_exit(oop obj, Thread* THREAD) {
- TEVENT (jni_exit) ;
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- }
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
-
- ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj);
- // If this thread has locked the object, exit the monitor. Note: can't use
- // monitor->check(CHECK); must exit even if an exception is pending.
- if (monitor->check(THREAD)) {
- monitor->exit(THREAD);
- }
-}
-
-// complete_exit()/reenter() are used to wait on a nested lock
-// i.e. to give up an outer lock completely and then re-enter
-// Used when holding nested locks - lock acquisition order: lock1 then lock2
-// 1) complete_exit lock1 - saving recursion count
-// 2) wait on lock2
-// 3) when notified on lock2, unlock lock2
-// 4) reenter lock1 with original recursion count
-// 5) lock lock2
-// NOTE: must use heavy weight monitor to handle complete_exit/reenter()
-intptr_t ObjectSynchronizer::complete_exit(Handle obj, TRAPS) {
- TEVENT (complete_exit) ;
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
-
- return monitor->complete_exit(THREAD);
-}
-
-// NOTE: must use heavy weight monitor to handle complete_exit/reenter()
-void ObjectSynchronizer::reenter(Handle obj, intptr_t recursion, TRAPS) {
- TEVENT (reenter) ;
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
-
- monitor->reenter(recursion, THREAD);
-}
-
-// This exists only as a workaround of dtrace bug 6254741
-int dtrace_waited_probe(ObjectMonitor* monitor, Handle obj, Thread* thr) {
- DTRACE_MONITOR_PROBE(waited, monitor, obj(), thr);
- return 0;
-}
-
-// NOTE: must use heavy weight monitor to handle wait()
-void ObjectSynchronizer::wait(Handle obj, jlong millis, TRAPS) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
- if (millis < 0) {
- TEVENT (wait - throw IAX) ;
- THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
- }
- ObjectMonitor* monitor = ObjectSynchronizer::inflate(THREAD, obj());
- DTRACE_MONITOR_WAIT_PROBE(monitor, obj(), THREAD, millis);
- monitor->wait(millis, true, THREAD);
-
- /* This dummy call is in place to get around dtrace bug 6254741. Once
- that's fixed we can uncomment the following line and remove the call */
- // DTRACE_MONITOR_PROBE(waited, monitor, obj(), THREAD);
- dtrace_waited_probe(monitor, obj, THREAD);
-}
-
-void ObjectSynchronizer::waitUninterruptibly (Handle obj, jlong millis, TRAPS) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
- if (millis < 0) {
- TEVENT (wait - throw IAX) ;
- THROW_MSG(vmSymbols::java_lang_IllegalArgumentException(), "timeout value is negative");
- }
- ObjectSynchronizer::inflate(THREAD, obj()) -> wait(millis, false, THREAD) ;
-}
-
-void ObjectSynchronizer::notify(Handle obj, TRAPS) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- markOop mark = obj->mark();
- if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
- return;
- }
- ObjectSynchronizer::inflate(THREAD, obj())->notify(THREAD);
-}
-
-// NOTE: see comment of notify()
-void ObjectSynchronizer::notifyall(Handle obj, TRAPS) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(obj, false, THREAD);
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- markOop mark = obj->mark();
- if (mark->has_locker() && THREAD->is_lock_owned((address)mark->locker())) {
- return;
- }
- ObjectSynchronizer::inflate(THREAD, obj())->notifyAll(THREAD);
-}
-
-intptr_t ObjectSynchronizer::FastHashCode (Thread * Self, oop obj) {
- if (UseBiasedLocking) {
- // NOTE: many places throughout the JVM do not expect a safepoint
- // to be taken here, in particular most operations on perm gen
- // objects. However, we only ever bias Java instances and all of
- // the call sites of identity_hash that might revoke biases have
- // been checked to make sure they can handle a safepoint. The
- // added check of the bias pattern is to avoid useless calls to
- // thread-local storage.
- if (obj->mark()->has_bias_pattern()) {
- // Box and unbox the raw reference just in case we cause a STW safepoint.
- Handle hobj (Self, obj) ;
- // Relaxing assertion for bug 6320749.
- assert (Universe::verify_in_progress() ||
- !SafepointSynchronize::is_at_safepoint(),
- "biases should not be seen by VM thread here");
- BiasedLocking::revoke_and_rebias(hobj, false, JavaThread::current());
- obj = hobj() ;
- assert(!obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
- }
+// Note that we could encounter some performance loss through false-sharing as
+// multiple locks occupy the same $ line. Padding might be appropriate.
- // hashCode() is a heap mutator ...
- // Relaxing assertion for bug 6320749.
- assert (Universe::verify_in_progress() ||
- !SafepointSynchronize::is_at_safepoint(), "invariant") ;
- assert (Universe::verify_in_progress() ||
- Self->is_Java_thread() , "invariant") ;
- assert (Universe::verify_in_progress() ||
- ((JavaThread *)Self)->thread_state() != _thread_blocked, "invariant") ;
-
- ObjectMonitor* monitor = NULL;
- markOop temp, test;
- intptr_t hash;
- markOop mark = ReadStableMark (obj);
-
- // object should remain ineligible for biased locking
- assert (!mark->has_bias_pattern(), "invariant") ;
-
- if (mark->is_neutral()) {
- hash = mark->hash(); // this is a normal header
- if (hash) { // if it has hash, just return it
- return hash;
- }
- hash = get_next_hash(Self, obj); // allocate a new hash code
- temp = mark->copy_set_hash(hash); // merge the hash code into header
- // use (machine word version) atomic operation to install the hash
- test = (markOop) Atomic::cmpxchg_ptr(temp, obj->mark_addr(), mark);
- if (test == mark) {
- return hash;
- }
- // If atomic operation failed, we must inflate the header
- // into heavy weight monitor. We could add more code here
- // for fast path, but it does not worth the complexity.
- } else if (mark->has_monitor()) {
- monitor = mark->monitor();
- temp = monitor->header();
- assert (temp->is_neutral(), "invariant") ;
- hash = temp->hash();
- if (hash) {
- return hash;
- }
- // Skip to the following code to reduce code size
- } else if (Self->is_lock_owned((address)mark->locker())) {
- temp = mark->displaced_mark_helper(); // this is a lightweight monitor owned
- assert (temp->is_neutral(), "invariant") ;
- hash = temp->hash(); // by current thread, check if the displaced
- if (hash) { // header contains hash code
- return hash;
- }
- // WARNING:
- // The displaced header is strictly immutable.
- // It can NOT be changed in ANY cases. So we have
- // to inflate the header into heavyweight monitor
- // even the current thread owns the lock. The reason
- // is the BasicLock (stack slot) will be asynchronously
- // read by other threads during the inflate() function.
- // Any change to stack may not propagate to other threads
- // correctly.
- }
-
- // Inflate the monitor to set hash code
- monitor = ObjectSynchronizer::inflate(Self, obj);
- // Load displaced header and check it has hash code
- mark = monitor->header();
- assert (mark->is_neutral(), "invariant") ;
- hash = mark->hash();
- if (hash == 0) {
- hash = get_next_hash(Self, obj);
- temp = mark->copy_set_hash(hash); // merge hash code into header
- assert (temp->is_neutral(), "invariant") ;
- test = (markOop) Atomic::cmpxchg_ptr(temp, monitor, mark);
- if (test != mark) {
- // The only update to the header in the monitor (outside GC)
- // is install the hash code. If someone add new usage of
- // displaced header, please update this code
- hash = test->hash();
- assert (test->is_neutral(), "invariant") ;
- assert (hash != 0, "Trivial unexpected object/monitor header usage.");
- }
- }
- // We finally get the hash
- return hash;
-}
-
-// Deprecated -- use FastHashCode() instead.
-
-intptr_t ObjectSynchronizer::identity_hash_value_for(Handle obj) {
- return FastHashCode (Thread::current(), obj()) ;
-}
-
-bool ObjectSynchronizer::current_thread_holds_lock(JavaThread* thread,
- Handle h_obj) {
- if (UseBiasedLocking) {
- BiasedLocking::revoke_and_rebias(h_obj, false, thread);
- assert(!h_obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- assert(thread == JavaThread::current(), "Can only be called on current thread");
- oop obj = h_obj();
-
- markOop mark = ReadStableMark (obj) ;
-
- // Uncontended case, header points to stack
- if (mark->has_locker()) {
- return thread->is_lock_owned((address)mark->locker());
- }
- // Contended case, header points to ObjectMonitor (tagged pointer)
- if (mark->has_monitor()) {
- ObjectMonitor* monitor = mark->monitor();
- return monitor->is_entered(thread) != 0 ;
- }
- // Unlocked case, header in place
- assert(mark->is_neutral(), "sanity check");
- return false;
-}
-
-// Be aware of this method could revoke bias of the lock object.
-// This method querys the ownership of the lock handle specified by 'h_obj'.
-// If the current thread owns the lock, it returns owner_self. If no
-// thread owns the lock, it returns owner_none. Otherwise, it will return
-// ower_other.
-ObjectSynchronizer::LockOwnership ObjectSynchronizer::query_lock_ownership
-(JavaThread *self, Handle h_obj) {
- // The caller must beware this method can revoke bias, and
- // revocation can result in a safepoint.
- assert (!SafepointSynchronize::is_at_safepoint(), "invariant") ;
- assert (self->thread_state() != _thread_blocked , "invariant") ;
-
- // Possible mark states: neutral, biased, stack-locked, inflated
-
- if (UseBiasedLocking && h_obj()->mark()->has_bias_pattern()) {
- // CASE: biased
- BiasedLocking::revoke_and_rebias(h_obj, false, self);
- assert(!h_obj->mark()->has_bias_pattern(),
- "biases should be revoked by now");
- }
-
- assert(self == JavaThread::current(), "Can only be called on current thread");
- oop obj = h_obj();
- markOop mark = ReadStableMark (obj) ;
-
- // CASE: stack-locked. Mark points to a BasicLock on the owner's stack.
- if (mark->has_locker()) {
- return self->is_lock_owned((address)mark->locker()) ?
- owner_self : owner_other;
- }
-
- // CASE: inflated. Mark (tagged pointer) points to an objectMonitor.
- // The Object:ObjectMonitor relationship is stable as long as we're
- // not at a safepoint.
- if (mark->has_monitor()) {
- void * owner = mark->monitor()->_owner ;
- if (owner == NULL) return owner_none ;
- return (owner == self ||
- self->is_lock_owned((address)owner)) ? owner_self : owner_other;
- }
-
- // CASE: neutral
- assert(mark->is_neutral(), "sanity check");
- return owner_none ; // it's unlocked
-}
-
-// FIXME: jvmti should call this
-JavaThread* ObjectSynchronizer::get_lock_owner(Handle h_obj, bool doLock) {
- if (UseBiasedLocking) {
- if (SafepointSynchronize::is_at_safepoint()) {
- BiasedLocking::revoke_at_safepoint(h_obj);
- } else {
- BiasedLocking::revoke_and_rebias(h_obj, false, JavaThread::current());
- }
- assert(!h_obj->mark()->has_bias_pattern(), "biases should be revoked by now");
- }
-
- oop obj = h_obj();
- address owner = NULL;
-
- markOop mark = ReadStableMark (obj) ;
-
- // Uncontended case, header points to stack
- if (mark->has_locker()) {
- owner = (address) mark->locker();
- }
-
- // Contended case, header points to ObjectMonitor (tagged pointer)
- if (mark->has_monitor()) {
- ObjectMonitor* monitor = mark->monitor();
- assert(monitor != NULL, "monitor should be non-null");
- owner = (address) monitor->owner();
- }
-
- if (owner != NULL) {
- return Threads::owning_thread_from_monitor_owner(owner, doLock);
- }
-
- // Unlocked case, header in place
- // Cannot have assertion since this object may have been
- // locked by another thread when reaching here.
- // assert(mark->is_neutral(), "sanity check");
-
- return NULL;
-}
-
-// Iterate through monitor cache and attempt to release thread's monitors
-// Gives up on a particular monitor if an exception occurs, but continues
-// the overall iteration, swallowing the exception.
-class ReleaseJavaMonitorsClosure: public MonitorClosure {
-private:
- TRAPS;
-
-public:
- ReleaseJavaMonitorsClosure(Thread* thread) : THREAD(thread) {}
- void do_monitor(ObjectMonitor* mid) {
- if (mid->owner() == THREAD) {
- (void)mid->complete_exit(CHECK);
- }
- }
-};
-
-// Release all inflated monitors owned by THREAD. Lightweight monitors are
-// ignored. This is meant to be called during JNI thread detach which assumes
-// all remaining monitors are heavyweight. All exceptions are swallowed.
-// Scanning the extant monitor list can be time consuming.
-// A simple optimization is to add a per-thread flag that indicates a thread
-// called jni_monitorenter() during its lifetime.
-//
-// Instead of No_Savepoint_Verifier it might be cheaper to
-// use an idiom of the form:
-// auto int tmp = SafepointSynchronize::_safepoint_counter ;
-// <code that must not run at safepoint>
-// guarantee (((tmp ^ _safepoint_counter) | (tmp & 1)) == 0) ;
-// Since the tests are extremely cheap we could leave them enabled
-// for normal product builds.
-
-void ObjectSynchronizer::release_monitors_owned_by_thread(TRAPS) {
- assert(THREAD == JavaThread::current(), "must be current Java thread");
- No_Safepoint_Verifier nsv ;
- ReleaseJavaMonitorsClosure rjmc(THREAD);
- Thread::muxAcquire(&ListLock, "release_monitors_owned_by_thread");
- ObjectSynchronizer::monitors_iterate(&rjmc);
- Thread::muxRelease(&ListLock);
- THREAD->clear_pending_exception();
-}
-
-// Visitors ...
-
-void ObjectSynchronizer::monitors_iterate(MonitorClosure* closure) {
- ObjectMonitor* block = gBlockList;
- ObjectMonitor* mid;
- while (block) {
- assert(block->object() == CHAINMARKER, "must be a block header");
- for (int i = _BLOCKSIZE - 1; i > 0; i--) {
- mid = block + i;
- oop object = (oop) mid->object();
- if (object != NULL) {
- closure->do_monitor(mid);
- }
- }
- block = (ObjectMonitor*) block->FreeNext;
- }
-}
-
-void ObjectSynchronizer::oops_do(OopClosure* f) {
- assert(SafepointSynchronize::is_at_safepoint(), "must be at safepoint");
- for (ObjectMonitor* block = gBlockList; block != NULL; block = next(block)) {
- assert(block->object() == CHAINMARKER, "must be a block header");
- for (int i = 1; i < _BLOCKSIZE; i++) {
- ObjectMonitor* mid = &block[i];
- if (mid->object() != NULL) {
- f->do_oop((oop*)mid->object_addr());
- }
- }
- }
-}
// Deflate_idle_monitors() is called at all safepoints, immediately
// after all mutators are stopped, but before any objects have moved.
@@ -1936,12 +1357,11 @@
// which in turn can mean large(r) numbers of objectmonitors in circulation.
// This is an unfortunate aspect of this design.
//
-// Another refinement would be to refrain from calling deflate_idle_monitors()
-// except at stop-the-world points associated with garbage collections.
-//
-// An even better solution would be to deflate on-the-fly, aggressively,
-// at monitorexit-time as is done in EVM's metalock or Relaxed Locks.
+enum ManifestConstants {
+ ClearResponsibleAtSTW = 0,
+ MaximumRecheckInterval = 1000
+} ;
// Deflate a single monitor if not in use
// Return true if deflated, false if in use
@@ -2088,7 +1508,7 @@
// Consider: audit gFreeList to ensure that MonitorFreeCount and list agree.
- if (Knob_Verbose) {
+ if (ObjectMonitor::Knob_Verbose) {
::printf ("Deflate: InCirc=%d InUse=%d Scavenged=%d ForceMonitorScavenge=%d : pop=%d free=%d\n",
nInCirculation, nInuse, nScavenged, ForceMonitorScavenge,
MonitorPopulation, MonitorFreeCount) ;
@@ -2107,8 +1527,8 @@
}
Thread::muxRelease (&ListLock) ;
- if (_sync_Deflations != NULL) _sync_Deflations->inc(nScavenged) ;
- if (_sync_MonExtant != NULL) _sync_MonExtant ->set_value(nInCirculation);
+ if (ObjectMonitor::_sync_Deflations != NULL) ObjectMonitor::_sync_Deflations->inc(nScavenged) ;
+ if (ObjectMonitor::_sync_MonExtant != NULL) ObjectMonitor::_sync_MonExtant ->set_value(nInCirculation);
// TODO: Add objectMonitor leak detection.
// Audit/inventory the objectMonitors -- make sure they're all accounted for.
@@ -2116,2810 +1536,49 @@
GVars.stwCycle ++ ;
}
-// A macro is used below because there may already be a pending
-// exception which should not abort the execution of the routines
-// which use this (which is why we don't put this into check_slow and
-// call it with a CHECK argument).
-
-#define CHECK_OWNER() \
- do { \
- if (THREAD != _owner) { \
- if (THREAD->is_lock_owned((address) _owner)) { \
- _owner = THREAD ; /* Convert from basiclock addr to Thread addr */ \
- _recursions = 0; \
- OwnerIsThread = 1 ; \
- } else { \
- TEVENT (Throw IMSX) ; \
- THROW(vmSymbols::java_lang_IllegalMonitorStateException()); \
- } \
- } \
- } while (false)
-
-// TODO-FIXME: eliminate ObjectWaiters. Replace this visitor/enumerator
-// interface with a simple FirstWaitingThread(), NextWaitingThread() interface.
-
-ObjectWaiter* ObjectMonitor::first_waiter() {
- return _WaitSet;
-}
-
-ObjectWaiter* ObjectMonitor::next_waiter(ObjectWaiter* o) {
- return o->_next;
-}
-
-Thread* ObjectMonitor::thread_of_waiter(ObjectWaiter* o) {
- return o->_thread;
-}
-
-// initialize the monitor, exception the semaphore, all other fields
-// are simple integers or pointers
-ObjectMonitor::ObjectMonitor() {
- _header = NULL;
- _count = 0;
- _waiters = 0,
- _recursions = 0;
- _object = NULL;
- _owner = NULL;
- _WaitSet = NULL;
- _WaitSetLock = 0 ;
- _Responsible = NULL ;
- _succ = NULL ;
- _cxq = NULL ;
- FreeNext = NULL ;
- _EntryList = NULL ;
- _SpinFreq = 0 ;
- _SpinClock = 0 ;
- OwnerIsThread = 0 ;
-}
-
-ObjectMonitor::~ObjectMonitor() {
- // TODO: Add asserts ...
- // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0
- // _count == 0 _EntryList == NULL etc
-}
+// Monitor cleanup on JavaThread::exit
-intptr_t ObjectMonitor::is_busy() const {
- // TODO-FIXME: merge _count and _waiters.
- // TODO-FIXME: assert _owner == null implies _recursions = 0
- // TODO-FIXME: assert _WaitSet != null implies _count > 0
- return _count|_waiters|intptr_t(_owner)|intptr_t(_cxq)|intptr_t(_EntryList ) ;
-}
-
-void ObjectMonitor::Recycle () {
- // TODO: add stronger asserts ...
- // _cxq == 0 _succ == NULL _owner == NULL _waiters == 0
- // _count == 0 EntryList == NULL
- // _recursions == 0 _WaitSet == NULL
- // TODO: assert (is_busy()|_recursions) == 0
- _succ = NULL ;
- _EntryList = NULL ;
- _cxq = NULL ;
- _WaitSet = NULL ;
- _recursions = 0 ;
- _SpinFreq = 0 ;
- _SpinClock = 0 ;
- OwnerIsThread = 0 ;
-}
-
-// WaitSet management ...
+// Iterate through monitor cache and attempt to release thread's monitors
+// Gives up on a particular monitor if an exception occurs, but continues
+// the overall iteration, swallowing the exception.
+class ReleaseJavaMonitorsClosure: public MonitorClosure {
+private:
+ TRAPS;
-inline void ObjectMonitor::AddWaiter(ObjectWaiter* node) {
- assert(node != NULL, "should not dequeue NULL node");
- assert(node->_prev == NULL, "node already in list");
- assert(node->_next == NULL, "node already in list");
- // put node at end of queue (circular doubly linked list)
- if (_WaitSet == NULL) {
- _WaitSet = node;
- node->_prev = node;
- node->_next = node;
- } else {
- ObjectWaiter* head = _WaitSet ;
- ObjectWaiter* tail = head->_prev;
- assert(tail->_next == head, "invariant check");
- tail->_next = node;
- head->_prev = node;
- node->_next = head;
- node->_prev = tail;
- }
-}
-
-inline ObjectWaiter* ObjectMonitor::DequeueWaiter() {
- // dequeue the very first waiter
- ObjectWaiter* waiter = _WaitSet;
- if (waiter) {
- DequeueSpecificWaiter(waiter);
- }
- return waiter;
-}
-
-inline void ObjectMonitor::DequeueSpecificWaiter(ObjectWaiter* node) {
- assert(node != NULL, "should not dequeue NULL node");
- assert(node->_prev != NULL, "node already removed from list");
- assert(node->_next != NULL, "node already removed from list");
- // when the waiter has woken up because of interrupt,
- // timeout or other spurious wake-up, dequeue the
- // waiter from waiting list
- ObjectWaiter* next = node->_next;
- if (next == node) {
- assert(node->_prev == node, "invariant check");
- _WaitSet = NULL;
- } else {
- ObjectWaiter* prev = node->_prev;
- assert(prev->_next == node, "invariant check");
- assert(next->_prev == node, "invariant check");
- next->_prev = prev;
- prev->_next = next;
- if (_WaitSet == node) {
- _WaitSet = next;
+public:
+ ReleaseJavaMonitorsClosure(Thread* thread) : THREAD(thread) {}
+ void do_monitor(ObjectMonitor* mid) {
+ if (mid->owner() == THREAD) {
+ (void)mid->complete_exit(CHECK);
}
}
- node->_next = NULL;
- node->_prev = NULL;
-}
-
-static char * kvGet (char * kvList, const char * Key) {
- if (kvList == NULL) return NULL ;
- size_t n = strlen (Key) ;
- char * Search ;
- for (Search = kvList ; *Search ; Search += strlen(Search) + 1) {
- if (strncmp (Search, Key, n) == 0) {
- if (Search[n] == '=') return Search + n + 1 ;
- if (Search[n] == 0) return (char *) "1" ;
- }
- }
- return NULL ;
-}
-
-static int kvGetInt (char * kvList, const char * Key, int Default) {
- char * v = kvGet (kvList, Key) ;
- int rslt = v ? ::strtol (v, NULL, 0) : Default ;
- if (Knob_ReportSettings && v != NULL) {
- ::printf (" SyncKnob: %s %d(%d)\n", Key, rslt, Default) ;
- ::fflush (stdout) ;
- }
- return rslt ;
-}
-
-// By convention we unlink a contending thread from EntryList|cxq immediately
-// after the thread acquires the lock in ::enter(). Equally, we could defer
-// unlinking the thread until ::exit()-time.
-
-void ObjectMonitor::UnlinkAfterAcquire (Thread * Self, ObjectWaiter * SelfNode)
-{
- assert (_owner == Self, "invariant") ;
- assert (SelfNode->_thread == Self, "invariant") ;
-
- if (SelfNode->TState == ObjectWaiter::TS_ENTER) {
- // Normal case: remove Self from the DLL EntryList .
- // This is a constant-time operation.
- ObjectWaiter * nxt = SelfNode->_next ;
- ObjectWaiter * prv = SelfNode->_prev ;
- if (nxt != NULL) nxt->_prev = prv ;
- if (prv != NULL) prv->_next = nxt ;
- if (SelfNode == _EntryList ) _EntryList = nxt ;
- assert (nxt == NULL || nxt->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- assert (prv == NULL || prv->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- TEVENT (Unlink from EntryList) ;
- } else {
- guarantee (SelfNode->TState == ObjectWaiter::TS_CXQ, "invariant") ;
- // Inopportune interleaving -- Self is still on the cxq.
- // This usually means the enqueue of self raced an exiting thread.
- // Normally we'll find Self near the front of the cxq, so
- // dequeueing is typically fast. If needbe we can accelerate
- // this with some MCS/CHL-like bidirectional list hints and advisory
- // back-links so dequeueing from the interior will normally operate
- // in constant-time.
- // Dequeue Self from either the head (with CAS) or from the interior
- // with a linear-time scan and normal non-atomic memory operations.
- // CONSIDER: if Self is on the cxq then simply drain cxq into EntryList
- // and then unlink Self from EntryList. We have to drain eventually,
- // so it might as well be now.
-
- ObjectWaiter * v = _cxq ;
- assert (v != NULL, "invariant") ;
- if (v != SelfNode || Atomic::cmpxchg_ptr (SelfNode->_next, &_cxq, v) != v) {
- // The CAS above can fail from interference IFF a "RAT" arrived.
- // In that case Self must be in the interior and can no longer be
- // at the head of cxq.
- if (v == SelfNode) {
- assert (_cxq != v, "invariant") ;
- v = _cxq ; // CAS above failed - start scan at head of list
- }
- ObjectWaiter * p ;
- ObjectWaiter * q = NULL ;
- for (p = v ; p != NULL && p != SelfNode; p = p->_next) {
- q = p ;
- assert (p->TState == ObjectWaiter::TS_CXQ, "invariant") ;
- }
- assert (v != SelfNode, "invariant") ;
- assert (p == SelfNode, "Node not found on cxq") ;
- assert (p != _cxq, "invariant") ;
- assert (q != NULL, "invariant") ;
- assert (q->_next == p, "invariant") ;
- q->_next = p->_next ;
- }
- TEVENT (Unlink from cxq) ;
- }
-
- // Diagnostic hygiene ...
- SelfNode->_prev = (ObjectWaiter *) 0xBAD ;
- SelfNode->_next = (ObjectWaiter *) 0xBAD ;
- SelfNode->TState = ObjectWaiter::TS_RUN ;
-}
-
-// Caveat: TryLock() is not necessarily serializing if it returns failure.
-// Callers must compensate as needed.
-
-int ObjectMonitor::TryLock (Thread * Self) {
- for (;;) {
- void * own = _owner ;
- if (own != NULL) return 0 ;
- if (Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
- // Either guarantee _recursions == 0 or set _recursions = 0.
- assert (_recursions == 0, "invariant") ;
- assert (_owner == Self, "invariant") ;
- // CONSIDER: set or assert that OwnerIsThread == 1
- return 1 ;
- }
- // The lock had been free momentarily, but we lost the race to the lock.
- // Interference -- the CAS failed.
- // We can either return -1 or retry.
- // Retry doesn't make as much sense because the lock was just acquired.
- if (true) return -1 ;
- }
-}
-
-// NotRunnable() -- informed spinning
-//
-// Don't bother spinning if the owner is not eligible to drop the lock.
-// Peek at the owner's schedctl.sc_state and Thread._thread_values and
-// spin only if the owner thread is _thread_in_Java or _thread_in_vm.
-// The thread must be runnable in order to drop the lock in timely fashion.
-// If the _owner is not runnable then spinning will not likely be
-// successful (profitable).
-//
-// Beware -- the thread referenced by _owner could have died
-// so a simply fetch from _owner->_thread_state might trap.
-// Instead, we use SafeFetchXX() to safely LD _owner->_thread_state.
-// Because of the lifecycle issues the schedctl and _thread_state values
-// observed by NotRunnable() might be garbage. NotRunnable must
-// tolerate this and consider the observed _thread_state value
-// as advisory.
-//
-// Beware too, that _owner is sometimes a BasicLock address and sometimes
-// a thread pointer. We differentiate the two cases with OwnerIsThread.
-// Alternately, we might tag the type (thread pointer vs basiclock pointer)
-// with the LSB of _owner. Another option would be to probablistically probe
-// the putative _owner->TypeTag value.
-//
-// Checking _thread_state isn't perfect. Even if the thread is
-// in_java it might be blocked on a page-fault or have been preempted
-// and sitting on a ready/dispatch queue. _thread state in conjunction
-// with schedctl.sc_state gives us a good picture of what the
-// thread is doing, however.
-//
-// TODO: check schedctl.sc_state.
-// We'll need to use SafeFetch32() to read from the schedctl block.
-// See RFE #5004247 and http://sac.sfbay.sun.com/Archives/CaseLog/arc/PSARC/2005/351/
-//
-// The return value from NotRunnable() is *advisory* -- the
-// result is based on sampling and is not necessarily coherent.
-// The caller must tolerate false-negative and false-positive errors.
-// Spinning, in general, is probabilistic anyway.
-
-
-int ObjectMonitor::NotRunnable (Thread * Self, Thread * ox) {
- // Check either OwnerIsThread or ox->TypeTag == 2BAD.
- if (!OwnerIsThread) return 0 ;
-
- if (ox == NULL) return 0 ;
-
- // Avoid transitive spinning ...
- // Say T1 spins or blocks trying to acquire L. T1._Stalled is set to L.
- // Immediately after T1 acquires L it's possible that T2, also
- // spinning on L, will see L.Owner=T1 and T1._Stalled=L.
- // This occurs transiently after T1 acquired L but before
- // T1 managed to clear T1.Stalled. T2 does not need to abort
- // its spin in this circumstance.
- intptr_t BlockedOn = SafeFetchN ((intptr_t *) &ox->_Stalled, intptr_t(1)) ;
-
- if (BlockedOn == 1) return 1 ;
- if (BlockedOn != 0) {
- return BlockedOn != intptr_t(this) && _owner == ox ;
- }
-
- assert (sizeof(((JavaThread *)ox)->_thread_state == sizeof(int)), "invariant") ;
- int jst = SafeFetch32 ((int *) &((JavaThread *) ox)->_thread_state, -1) ; ;
- // consider also: jst != _thread_in_Java -- but that's overspecific.
- return jst == _thread_blocked || jst == _thread_in_native ;
-}
-
-
-// Adaptive spin-then-block - rational spinning
-//
-// Note that we spin "globally" on _owner with a classic SMP-polite TATAS
-// algorithm. On high order SMP systems it would be better to start with
-// a brief global spin and then revert to spinning locally. In the spirit of MCS/CLH,
-// a contending thread could enqueue itself on the cxq and then spin locally
-// on a thread-specific variable such as its ParkEvent._Event flag.
-// That's left as an exercise for the reader. Note that global spinning is
-// not problematic on Niagara, as the L2$ serves the interconnect and has both
-// low latency and massive bandwidth.
-//
-// Broadly, we can fix the spin frequency -- that is, the % of contended lock
-// acquisition attempts where we opt to spin -- at 100% and vary the spin count
-// (duration) or we can fix the count at approximately the duration of
-// a context switch and vary the frequency. Of course we could also
-// vary both satisfying K == Frequency * Duration, where K is adaptive by monitor.
-// See http://j2se.east/~dice/PERSIST/040824-AdaptiveSpinning.html.
-//
-// This implementation varies the duration "D", where D varies with
-// the success rate of recent spin attempts. (D is capped at approximately
-// length of a round-trip context switch). The success rate for recent
-// spin attempts is a good predictor of the success rate of future spin
-// attempts. The mechanism adapts automatically to varying critical
-// section length (lock modality), system load and degree of parallelism.
-// D is maintained per-monitor in _SpinDuration and is initialized
-// optimistically. Spin frequency is fixed at 100%.
-//
-// Note that _SpinDuration is volatile, but we update it without locks
-// or atomics. The code is designed so that _SpinDuration stays within
-// a reasonable range even in the presence of races. The arithmetic
-// operations on _SpinDuration are closed over the domain of legal values,
-// so at worst a race will install and older but still legal value.
-// At the very worst this introduces some apparent non-determinism.
-// We might spin when we shouldn't or vice-versa, but since the spin
-// count are relatively short, even in the worst case, the effect is harmless.
-//
-// Care must be taken that a low "D" value does not become an
-// an absorbing state. Transient spinning failures -- when spinning
-// is overall profitable -- should not cause the system to converge
-// on low "D" values. We want spinning to be stable and predictable
-// and fairly responsive to change and at the same time we don't want
-// it to oscillate, become metastable, be "too" non-deterministic,
-// or converge on or enter undesirable stable absorbing states.
-//
-// We implement a feedback-based control system -- using past behavior
-// to predict future behavior. We face two issues: (a) if the
-// input signal is random then the spin predictor won't provide optimal
-// results, and (b) if the signal frequency is too high then the control
-// system, which has some natural response lag, will "chase" the signal.
-// (b) can arise from multimodal lock hold times. Transient preemption
-// can also result in apparent bimodal lock hold times.
-// Although sub-optimal, neither condition is particularly harmful, as
-// in the worst-case we'll spin when we shouldn't or vice-versa.
-// The maximum spin duration is rather short so the failure modes aren't bad.
-// To be conservative, I've tuned the gain in system to bias toward
-// _not spinning. Relatedly, the system can sometimes enter a mode where it
-// "rings" or oscillates between spinning and not spinning. This happens
-// when spinning is just on the cusp of profitability, however, so the
-// situation is not dire. The state is benign -- there's no need to add
-// hysteresis control to damp the transition rate between spinning and
-// not spinning.
-//
-// - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-//
-// Spin-then-block strategies ...
-//
-// Thoughts on ways to improve spinning :
-//
-// * Periodically call {psr_}getloadavg() while spinning, and
-// permit unbounded spinning if the load average is <
-// the number of processors. Beware, however, that getloadavg()
-// is exceptionally fast on solaris (about 1/10 the cost of a full
-// spin cycle, but quite expensive on linux. Beware also, that
-// multiple JVMs could "ring" or oscillate in a feedback loop.
-// Sufficient damping would solve that problem.
-//
-// * We currently use spin loops with iteration counters to approximate
-// spinning for some interval. Given the availability of high-precision
-// time sources such as gethrtime(), %TICK, %STICK, RDTSC, etc., we should
-// someday reimplement the spin loops to duration-based instead of iteration-based.
-//
-// * Don't spin if there are more than N = (CPUs/2) threads
-// currently spinning on the monitor (or globally).
-// That is, limit the number of concurrent spinners.
-// We might also limit the # of spinners in the JVM, globally.
-//
-// * If a spinning thread observes _owner change hands it should
-// abort the spin (and park immediately) or at least debit
-// the spin counter by a large "penalty".
-//
-// * Classically, the spin count is either K*(CPUs-1) or is a
-// simple constant that approximates the length of a context switch.
-// We currently use a value -- computed by a special utility -- that
-// approximates round-trip context switch times.
-//
-// * Normally schedctl_start()/_stop() is used to advise the kernel
-// to avoid preempting threads that are running in short, bounded
-// critical sections. We could use the schedctl hooks in an inverted
-// sense -- spinners would set the nopreempt flag, but poll the preempt
-// pending flag. If a spinner observed a pending preemption it'd immediately
-// abort the spin and park. As such, the schedctl service acts as
-// a preemption warning mechanism.
-//
-// * In lieu of spinning, if the system is running below saturation
-// (that is, loadavg() << #cpus), we can instead suppress futile
-// wakeup throttling, or even wake more than one successor at exit-time.
-// The net effect is largely equivalent to spinning. In both cases,
-// contending threads go ONPROC and opportunistically attempt to acquire
-// the lock, decreasing lock handover latency at the expense of wasted
-// cycles and context switching.
-//
-// * We might to spin less after we've parked as the thread will
-// have less $ and TLB affinity with the processor.
-// Likewise, we might spin less if we come ONPROC on a different
-// processor or after a long period (>> rechose_interval).
-//
-// * A table-driven state machine similar to Solaris' dispadmin scheduling
-// tables might be a better design. Instead of encoding information in
-// _SpinDuration, _SpinFreq and _SpinClock we'd just use explicit,
-// discrete states. Success or failure during a spin would drive
-// state transitions, and each state node would contain a spin count.
-//
-// * If the processor is operating in a mode intended to conserve power
-// (such as Intel's SpeedStep) or to reduce thermal output (thermal
-// step-down mode) then the Java synchronization subsystem should
-// forgo spinning.
-//
-// * The minimum spin duration should be approximately the worst-case
-// store propagation latency on the platform. That is, the time
-// it takes a store on CPU A to become visible on CPU B, where A and
-// B are "distant".
-//
-// * We might want to factor a thread's priority in the spin policy.
-// Threads with a higher priority might spin for slightly longer.
-// Similarly, if we use back-off in the TATAS loop, lower priority
-// threads might back-off longer. We don't currently use a
-// thread's priority when placing it on the entry queue. We may
-// want to consider doing so in future releases.
-//
-// * We might transiently drop a thread's scheduling priority while it spins.
-// SCHED_BATCH on linux and FX scheduling class at priority=0 on Solaris
-// would suffice. We could even consider letting the thread spin indefinitely at
-// a depressed or "idle" priority. This brings up fairness issues, however --
-// in a saturated system a thread would with a reduced priority could languish
-// for extended periods on the ready queue.
-//
-// * While spinning try to use the otherwise wasted time to help the VM make
-// progress:
-//
-// -- YieldTo() the owner, if the owner is OFFPROC but ready
-// Done our remaining quantum directly to the ready thread.
-// This helps "push" the lock owner through the critical section.
-// It also tends to improve affinity/locality as the lock
-// "migrates" less frequently between CPUs.
-// -- Walk our own stack in anticipation of blocking. Memoize the roots.
-// -- Perform strand checking for other thread. Unpark potential strandees.
-// -- Help GC: trace or mark -- this would need to be a bounded unit of work.
-// Unfortunately this will pollute our $ and TLBs. Recall that we
-// spin to avoid context switching -- context switching has an
-// immediate cost in latency, a disruptive cost to other strands on a CMT
-// processor, and an amortized cost because of the D$ and TLB cache
-// reload transient when the thread comes back ONPROC and repopulates
-// $s and TLBs.
-// -- call getloadavg() to see if the system is saturated. It'd probably
-// make sense to call getloadavg() half way through the spin.
-// If the system isn't at full capacity the we'd simply reset
-// the spin counter to and extend the spin attempt.
-// -- Doug points out that we should use the same "helping" policy
-// in thread.yield().
-//
-// * Try MONITOR-MWAIT on systems that support those instructions.
-//
-// * The spin statistics that drive spin decisions & frequency are
-// maintained in the objectmonitor structure so if we deflate and reinflate
-// we lose spin state. In practice this is not usually a concern
-// as the default spin state after inflation is aggressive (optimistic)
-// and tends toward spinning. So in the worst case for a lock where
-// spinning is not profitable we may spin unnecessarily for a brief
-// period. But then again, if a lock is contended it'll tend not to deflate
-// in the first place.
-
-
-intptr_t ObjectMonitor::SpinCallbackArgument = 0 ;
-int (*ObjectMonitor::SpinCallbackFunction)(intptr_t, int) = NULL ;
-
-// Spinning: Fixed frequency (100%), vary duration
-
-int ObjectMonitor::TrySpin_VaryDuration (Thread * Self) {
-
- // Dumb, brutal spin. Good for comparative measurements against adaptive spinning.
- int ctr = Knob_FixedSpin ;
- if (ctr != 0) {
- while (--ctr >= 0) {
- if (TryLock (Self) > 0) return 1 ;
- SpinPause () ;
- }
- return 0 ;
- }
-
- for (ctr = Knob_PreSpin + 1; --ctr >= 0 ; ) {
- if (TryLock(Self) > 0) {
- // Increase _SpinDuration ...
- // Note that we don't clamp SpinDuration precisely at SpinLimit.
- // Raising _SpurDuration to the poverty line is key.
- int x = _SpinDuration ;
- if (x < Knob_SpinLimit) {
- if (x < Knob_Poverty) x = Knob_Poverty ;
- _SpinDuration = x + Knob_BonusB ;
- }
- return 1 ;
- }
- SpinPause () ;
- }
-
- // Admission control - verify preconditions for spinning
- //
- // We always spin a little bit, just to prevent _SpinDuration == 0 from
- // becoming an absorbing state. Put another way, we spin briefly to
- // sample, just in case the system load, parallelism, contention, or lock
- // modality changed.
- //
- // Consider the following alternative:
- // Periodically set _SpinDuration = _SpinLimit and try a long/full
- // spin attempt. "Periodically" might mean after a tally of
- // the # of failed spin attempts (or iterations) reaches some threshold.
- // This takes us into the realm of 1-out-of-N spinning, where we
- // hold the duration constant but vary the frequency.
-
- ctr = _SpinDuration ;
- if (ctr < Knob_SpinBase) ctr = Knob_SpinBase ;
- if (ctr <= 0) return 0 ;
-
- if (Knob_SuccRestrict && _succ != NULL) return 0 ;
- if (Knob_OState && NotRunnable (Self, (Thread *) _owner)) {
- TEVENT (Spin abort - notrunnable [TOP]);
- return 0 ;
- }
-
- int MaxSpin = Knob_MaxSpinners ;
- if (MaxSpin >= 0) {
- if (_Spinner > MaxSpin) {
- TEVENT (Spin abort -- too many spinners) ;
- return 0 ;
- }
- // Slighty racy, but benign ...
- Adjust (&_Spinner, 1) ;
- }
-
- // We're good to spin ... spin ingress.
- // CONSIDER: use Prefetch::write() to avoid RTS->RTO upgrades
- // when preparing to LD...CAS _owner, etc and the CAS is likely
- // to succeed.
- int hits = 0 ;
- int msk = 0 ;
- int caspty = Knob_CASPenalty ;
- int oxpty = Knob_OXPenalty ;
- int sss = Knob_SpinSetSucc ;
- if (sss && _succ == NULL ) _succ = Self ;
- Thread * prv = NULL ;
-
- // There are three ways to exit the following loop:
- // 1. A successful spin where this thread has acquired the lock.
- // 2. Spin failure with prejudice
- // 3. Spin failure without prejudice
-
- while (--ctr >= 0) {
-
- // Periodic polling -- Check for pending GC
- // Threads may spin while they're unsafe.
- // We don't want spinning threads to delay the JVM from reaching
- // a stop-the-world safepoint or to steal cycles from GC.
- // If we detect a pending safepoint we abort in order that
- // (a) this thread, if unsafe, doesn't delay the safepoint, and (b)
- // this thread, if safe, doesn't steal cycles from GC.
- // This is in keeping with the "no loitering in runtime" rule.
- // We periodically check to see if there's a safepoint pending.
- if ((ctr & 0xFF) == 0) {
- if (SafepointSynchronize::do_call_back()) {
- TEVENT (Spin: safepoint) ;
- goto Abort ; // abrupt spin egress
- }
- if (Knob_UsePause & 1) SpinPause () ;
-
- int (*scb)(intptr_t,int) = SpinCallbackFunction ;
- if (hits > 50 && scb != NULL) {
- int abend = (*scb)(SpinCallbackArgument, 0) ;
- }
- }
-
- if (Knob_UsePause & 2) SpinPause() ;
-
- // Exponential back-off ... Stay off the bus to reduce coherency traffic.
- // This is useful on classic SMP systems, but is of less utility on
- // N1-style CMT platforms.
- //
- // Trade-off: lock acquisition latency vs coherency bandwidth.
- // Lock hold times are typically short. A histogram
- // of successful spin attempts shows that we usually acquire
- // the lock early in the spin. That suggests we want to
- // sample _owner frequently in the early phase of the spin,
- // but then back-off and sample less frequently as the spin
- // progresses. The back-off makes a good citizen on SMP big
- // SMP systems. Oversampling _owner can consume excessive
- // coherency bandwidth. Relatedly, if we _oversample _owner we
- // can inadvertently interfere with the the ST m->owner=null.
- // executed by the lock owner.
- if (ctr & msk) continue ;
- ++hits ;
- if ((hits & 0xF) == 0) {
- // The 0xF, above, corresponds to the exponent.
- // Consider: (msk+1)|msk
- msk = ((msk << 2)|3) & BackOffMask ;
- }
-
- // Probe _owner with TATAS
- // If this thread observes the monitor transition or flicker
- // from locked to unlocked to locked, then the odds that this
- // thread will acquire the lock in this spin attempt go down
- // considerably. The same argument applies if the CAS fails
- // or if we observe _owner change from one non-null value to
- // another non-null value. In such cases we might abort
- // the spin without prejudice or apply a "penalty" to the
- // spin count-down variable "ctr", reducing it by 100, say.
-
- Thread * ox = (Thread *) _owner ;
- if (ox == NULL) {
- ox = (Thread *) Atomic::cmpxchg_ptr (Self, &_owner, NULL) ;
- if (ox == NULL) {
- // The CAS succeeded -- this thread acquired ownership
- // Take care of some bookkeeping to exit spin state.
- if (sss && _succ == Self) {
- _succ = NULL ;
- }
- if (MaxSpin > 0) Adjust (&_Spinner, -1) ;
-
- // Increase _SpinDuration :
- // The spin was successful (profitable) so we tend toward
- // longer spin attempts in the future.
- // CONSIDER: factor "ctr" into the _SpinDuration adjustment.
- // If we acquired the lock early in the spin cycle it
- // makes sense to increase _SpinDuration proportionally.
- // Note that we don't clamp SpinDuration precisely at SpinLimit.
- int x = _SpinDuration ;
- if (x < Knob_SpinLimit) {
- if (x < Knob_Poverty) x = Knob_Poverty ;
- _SpinDuration = x + Knob_Bonus ;
- }
- return 1 ;
- }
-
- // The CAS failed ... we can take any of the following actions:
- // * penalize: ctr -= Knob_CASPenalty
- // * exit spin with prejudice -- goto Abort;
- // * exit spin without prejudice.
- // * Since CAS is high-latency, retry again immediately.
- prv = ox ;
- TEVENT (Spin: cas failed) ;
- if (caspty == -2) break ;
- if (caspty == -1) goto Abort ;
- ctr -= caspty ;
- continue ;
- }
-
- // Did lock ownership change hands ?
- if (ox != prv && prv != NULL ) {
- TEVENT (spin: Owner changed)
- if (oxpty == -2) break ;
- if (oxpty == -1) goto Abort ;
- ctr -= oxpty ;
- }
- prv = ox ;
-
- // Abort the spin if the owner is not executing.
- // The owner must be executing in order to drop the lock.
- // Spinning while the owner is OFFPROC is idiocy.
- // Consider: ctr -= RunnablePenalty ;
- if (Knob_OState && NotRunnable (Self, ox)) {
- TEVENT (Spin abort - notrunnable);
- goto Abort ;
- }
- if (sss && _succ == NULL ) _succ = Self ;
- }
-
- // Spin failed with prejudice -- reduce _SpinDuration.
- // TODO: Use an AIMD-like policy to adjust _SpinDuration.
- // AIMD is globally stable.
- TEVENT (Spin failure) ;
- {
- int x = _SpinDuration ;
- if (x > 0) {
- // Consider an AIMD scheme like: x -= (x >> 3) + 100
- // This is globally sample and tends to damp the response.
- x -= Knob_Penalty ;
- if (x < 0) x = 0 ;
- _SpinDuration = x ;
- }
- }
-
- Abort:
- if (MaxSpin >= 0) Adjust (&_Spinner, -1) ;
- if (sss && _succ == Self) {
- _succ = NULL ;
- // Invariant: after setting succ=null a contending thread
- // must recheck-retry _owner before parking. This usually happens
- // in the normal usage of TrySpin(), but it's safest
- // to make TrySpin() as foolproof as possible.
- OrderAccess::fence() ;
- if (TryLock(Self) > 0) return 1 ;
- }
- return 0 ;
-}
-
-#define TrySpin TrySpin_VaryDuration
-
-static void DeferredInitialize () {
- if (InitDone > 0) return ;
- if (Atomic::cmpxchg (-1, &InitDone, 0) != 0) {
- while (InitDone != 1) ;
- return ;
- }
-
- // One-shot global initialization ...
- // The initialization is idempotent, so we don't need locks.
- // In the future consider doing this via os::init_2().
- // SyncKnobs consist of <Key>=<Value> pairs in the style
- // of environment variables. Start by converting ':' to NUL.
-
- if (SyncKnobs == NULL) SyncKnobs = "" ;
-
- size_t sz = strlen (SyncKnobs) ;
- char * knobs = (char *) malloc (sz + 2) ;
- if (knobs == NULL) {
- vm_exit_out_of_memory (sz + 2, "Parse SyncKnobs") ;
- guarantee (0, "invariant") ;
- }
- strcpy (knobs, SyncKnobs) ;
- knobs[sz+1] = 0 ;
- for (char * p = knobs ; *p ; p++) {
- if (*p == ':') *p = 0 ;
- }
-
- #define SETKNOB(x) { Knob_##x = kvGetInt (knobs, #x, Knob_##x); }
- SETKNOB(ReportSettings) ;
- SETKNOB(Verbose) ;
- SETKNOB(FixedSpin) ;
- SETKNOB(SpinLimit) ;
- SETKNOB(SpinBase) ;
- SETKNOB(SpinBackOff);
- SETKNOB(CASPenalty) ;
- SETKNOB(OXPenalty) ;
- SETKNOB(LogSpins) ;
- SETKNOB(SpinSetSucc) ;
- SETKNOB(SuccEnabled) ;
- SETKNOB(SuccRestrict) ;
- SETKNOB(Penalty) ;
- SETKNOB(Bonus) ;
- SETKNOB(BonusB) ;
- SETKNOB(Poverty) ;
- SETKNOB(SpinAfterFutile) ;
- SETKNOB(UsePause) ;
- SETKNOB(SpinEarly) ;
- SETKNOB(OState) ;
- SETKNOB(MaxSpinners) ;
- SETKNOB(PreSpin) ;
- SETKNOB(ExitPolicy) ;
- SETKNOB(QMode);
- SETKNOB(ResetEvent) ;
- SETKNOB(MoveNotifyee) ;
- SETKNOB(FastHSSEC) ;
- #undef SETKNOB
-
- if (os::is_MP()) {
- BackOffMask = (1 << Knob_SpinBackOff) - 1 ;
- if (Knob_ReportSettings) ::printf ("BackOffMask=%X\n", BackOffMask) ;
- // CONSIDER: BackOffMask = ROUNDUP_NEXT_POWER2 (ncpus-1)
- } else {
- Knob_SpinLimit = 0 ;
- Knob_SpinBase = 0 ;
- Knob_PreSpin = 0 ;
- Knob_FixedSpin = -1 ;
- }
-
- if (Knob_LogSpins == 0) {
- ObjectSynchronizer::_sync_FailedSpins = NULL ;
- }
-
- free (knobs) ;
- OrderAccess::fence() ;
- InitDone = 1 ;
-}
-
-// Theory of operations -- Monitors lists, thread residency, etc:
-//
-// * A thread acquires ownership of a monitor by successfully
-// CAS()ing the _owner field from null to non-null.
-//
-// * Invariant: A thread appears on at most one monitor list --
-// cxq, EntryList or WaitSet -- at any one time.
-//
-// * Contending threads "push" themselves onto the cxq with CAS
-// and then spin/park.
-//
-// * After a contending thread eventually acquires the lock it must
-// dequeue itself from either the EntryList or the cxq.
-//
-// * The exiting thread identifies and unparks an "heir presumptive"
-// tentative successor thread on the EntryList. Critically, the
-// exiting thread doesn't unlink the successor thread from the EntryList.
-// After having been unparked, the wakee will recontend for ownership of
-// the monitor. The successor (wakee) will either acquire the lock or
-// re-park itself.
-//
-// Succession is provided for by a policy of competitive handoff.
-// The exiting thread does _not_ grant or pass ownership to the
-// successor thread. (This is also referred to as "handoff" succession").
-// Instead the exiting thread releases ownership and possibly wakes
-// a successor, so the successor can (re)compete for ownership of the lock.
-// If the EntryList is empty but the cxq is populated the exiting
-// thread will drain the cxq into the EntryList. It does so by
-// by detaching the cxq (installing null with CAS) and folding
-// the threads from the cxq into the EntryList. The EntryList is
-// doubly linked, while the cxq is singly linked because of the
-// CAS-based "push" used to enqueue recently arrived threads (RATs).
-//
-// * Concurrency invariants:
-//
-// -- only the monitor owner may access or mutate the EntryList.
-// The mutex property of the monitor itself protects the EntryList
-// from concurrent interference.
-// -- Only the monitor owner may detach the cxq.
-//
-// * The monitor entry list operations avoid locks, but strictly speaking
-// they're not lock-free. Enter is lock-free, exit is not.
-// See http://j2se.east/~dice/PERSIST/040825-LockFreeQueues.html
-//
-// * The cxq can have multiple concurrent "pushers" but only one concurrent
-// detaching thread. This mechanism is immune from the ABA corruption.
-// More precisely, the CAS-based "push" onto cxq is ABA-oblivious.
-//
-// * Taken together, the cxq and the EntryList constitute or form a
-// single logical queue of threads stalled trying to acquire the lock.
-// We use two distinct lists to improve the odds of a constant-time
-// dequeue operation after acquisition (in the ::enter() epilog) and
-// to reduce heat on the list ends. (c.f. Michael Scott's "2Q" algorithm).
-// A key desideratum is to minimize queue & monitor metadata manipulation
-// that occurs while holding the monitor lock -- that is, we want to
-// minimize monitor lock holds times. Note that even a small amount of
-// fixed spinning will greatly reduce the # of enqueue-dequeue operations
-// on EntryList|cxq. That is, spinning relieves contention on the "inner"
-// locks and monitor metadata.
-//
-// Cxq points to the the set of Recently Arrived Threads attempting entry.
-// Because we push threads onto _cxq with CAS, the RATs must take the form of
-// a singly-linked LIFO. We drain _cxq into EntryList at unlock-time when
-// the unlocking thread notices that EntryList is null but _cxq is != null.
-//
-// The EntryList is ordered by the prevailing queue discipline and
-// can be organized in any convenient fashion, such as a doubly-linked list or
-// a circular doubly-linked list. Critically, we want insert and delete operations
-// to operate in constant-time. If we need a priority queue then something akin
-// to Solaris' sleepq would work nicely. Viz.,
-// http://agg.eng/ws/on10_nightly/source/usr/src/uts/common/os/sleepq.c.
-// Queue discipline is enforced at ::exit() time, when the unlocking thread
-// drains the cxq into the EntryList, and orders or reorders the threads on the
-// EntryList accordingly.
-//
-// Barring "lock barging", this mechanism provides fair cyclic ordering,
-// somewhat similar to an elevator-scan.
-//
-// * The monitor synchronization subsystem avoids the use of native
-// synchronization primitives except for the narrow platform-specific
-// park-unpark abstraction. See the comments in os_solaris.cpp regarding
-// the semantics of park-unpark. Put another way, this monitor implementation
-// depends only on atomic operations and park-unpark. The monitor subsystem
-// manages all RUNNING->BLOCKED and BLOCKED->READY transitions while the
-// underlying OS manages the READY<->RUN transitions.
-//
-// * Waiting threads reside on the WaitSet list -- wait() puts
-// the caller onto the WaitSet.
-//
-// * notify() or notifyAll() simply transfers threads from the WaitSet to
-// either the EntryList or cxq. Subsequent exit() operations will
-// unpark the notifyee. Unparking a notifee in notify() is inefficient -
-// it's likely the notifyee would simply impale itself on the lock held
-// by the notifier.
-//
-// * An interesting alternative is to encode cxq as (List,LockByte) where
-// the LockByte is 0 iff the monitor is owned. _owner is simply an auxiliary
-// variable, like _recursions, in the scheme. The threads or Events that form
-// the list would have to be aligned in 256-byte addresses. A thread would
-// try to acquire the lock or enqueue itself with CAS, but exiting threads
-// could use a 1-0 protocol and simply STB to set the LockByte to 0.
-// Note that is is *not* word-tearing, but it does presume that full-word
-// CAS operations are coherent with intermix with STB operations. That's true
-// on most common processors.
-//
-// * See also http://blogs.sun.com/dave
-
-
-void ATTR ObjectMonitor::EnterI (TRAPS) {
- Thread * Self = THREAD ;
- assert (Self->is_Java_thread(), "invariant") ;
- assert (((JavaThread *) Self)->thread_state() == _thread_blocked , "invariant") ;
-
- // Try the lock - TATAS
- if (TryLock (Self) > 0) {
- assert (_succ != Self , "invariant") ;
- assert (_owner == Self , "invariant") ;
- assert (_Responsible != Self , "invariant") ;
- return ;
- }
-
- DeferredInitialize () ;
-
- // We try one round of spinning *before* enqueueing Self.
- //
- // If the _owner is ready but OFFPROC we could use a YieldTo()
- // operation to donate the remainder of this thread's quantum
- // to the owner. This has subtle but beneficial affinity
- // effects.
-
- if (TrySpin (Self) > 0) {
- assert (_owner == Self , "invariant") ;
- assert (_succ != Self , "invariant") ;
- assert (_Responsible != Self , "invariant") ;
- return ;
- }
-
- // The Spin failed -- Enqueue and park the thread ...
- assert (_succ != Self , "invariant") ;
- assert (_owner != Self , "invariant") ;
- assert (_Responsible != Self , "invariant") ;
-
- // Enqueue "Self" on ObjectMonitor's _cxq.
- //
- // Node acts as a proxy for Self.
- // As an aside, if were to ever rewrite the synchronization code mostly
- // in Java, WaitNodes, ObjectMonitors, and Events would become 1st-class
- // Java objects. This would avoid awkward lifecycle and liveness issues,
- // as well as eliminate a subset of ABA issues.
- // TODO: eliminate ObjectWaiter and enqueue either Threads or Events.
- //
-
- ObjectWaiter node(Self) ;
- Self->_ParkEvent->reset() ;
- node._prev = (ObjectWaiter *) 0xBAD ;
- node.TState = ObjectWaiter::TS_CXQ ;
-
- // Push "Self" onto the front of the _cxq.
- // Once on cxq/EntryList, Self stays on-queue until it acquires the lock.
- // Note that spinning tends to reduce the rate at which threads
- // enqueue and dequeue on EntryList|cxq.
- ObjectWaiter * nxt ;
- for (;;) {
- node._next = nxt = _cxq ;
- if (Atomic::cmpxchg_ptr (&node, &_cxq, nxt) == nxt) break ;
-
- // Interference - the CAS failed because _cxq changed. Just retry.
- // As an optional optimization we retry the lock.
- if (TryLock (Self) > 0) {
- assert (_succ != Self , "invariant") ;
- assert (_owner == Self , "invariant") ;
- assert (_Responsible != Self , "invariant") ;
- return ;
- }
- }
-
- // Check for cxq|EntryList edge transition to non-null. This indicates
- // the onset of contention. While contention persists exiting threads
- // will use a ST:MEMBAR:LD 1-1 exit protocol. When contention abates exit
- // operations revert to the faster 1-0 mode. This enter operation may interleave
- // (race) a concurrent 1-0 exit operation, resulting in stranding, so we
- // arrange for one of the contending thread to use a timed park() operations
- // to detect and recover from the race. (Stranding is form of progress failure
- // where the monitor is unlocked but all the contending threads remain parked).
- // That is, at least one of the contended threads will periodically poll _owner.
- // One of the contending threads will become the designated "Responsible" thread.
- // The Responsible thread uses a timed park instead of a normal indefinite park
- // operation -- it periodically wakes and checks for and recovers from potential
- // strandings admitted by 1-0 exit operations. We need at most one Responsible
- // thread per-monitor at any given moment. Only threads on cxq|EntryList may
- // be responsible for a monitor.
- //
- // Currently, one of the contended threads takes on the added role of "Responsible".
- // A viable alternative would be to use a dedicated "stranding checker" thread
- // that periodically iterated over all the threads (or active monitors) and unparked
- // successors where there was risk of stranding. This would help eliminate the
- // timer scalability issues we see on some platforms as we'd only have one thread
- // -- the checker -- parked on a timer.
-
- if ((SyncFlags & 16) == 0 && nxt == NULL && _EntryList == NULL) {
- // Try to assume the role of responsible thread for the monitor.
- // CONSIDER: ST vs CAS vs { if (Responsible==null) Responsible=Self }
- Atomic::cmpxchg_ptr (Self, &_Responsible, NULL) ;
- }
-
- // The lock have been released while this thread was occupied queueing
- // itself onto _cxq. To close the race and avoid "stranding" and
- // progress-liveness failure we must resample-retry _owner before parking.
- // Note the Dekker/Lamport duality: ST cxq; MEMBAR; LD Owner.
- // In this case the ST-MEMBAR is accomplished with CAS().
- //
- // TODO: Defer all thread state transitions until park-time.
- // Since state transitions are heavy and inefficient we'd like
- // to defer the state transitions until absolutely necessary,
- // and in doing so avoid some transitions ...
-
- TEVENT (Inflated enter - Contention) ;
- int nWakeups = 0 ;
- int RecheckInterval = 1 ;
-
- for (;;) {
-
- if (TryLock (Self) > 0) break ;
- assert (_owner != Self, "invariant") ;
-
- if ((SyncFlags & 2) && _Responsible == NULL) {
- Atomic::cmpxchg_ptr (Self, &_Responsible, NULL) ;
- }
-
- // park self
- if (_Responsible == Self || (SyncFlags & 1)) {
- TEVENT (Inflated enter - park TIMED) ;
- Self->_ParkEvent->park ((jlong) RecheckInterval) ;
- // Increase the RecheckInterval, but clamp the value.
- RecheckInterval *= 8 ;
- if (RecheckInterval > 1000) RecheckInterval = 1000 ;
- } else {
- TEVENT (Inflated enter - park UNTIMED) ;
- Self->_ParkEvent->park() ;
- }
-
- if (TryLock(Self) > 0) break ;
-
- // The lock is still contested.
- // Keep a tally of the # of futile wakeups.
- // Note that the counter is not protected by a lock or updated by atomics.
- // That is by design - we trade "lossy" counters which are exposed to
- // races during updates for a lower probe effect.
- TEVENT (Inflated enter - Futile wakeup) ;
- if (ObjectSynchronizer::_sync_FutileWakeups != NULL) {
- ObjectSynchronizer::_sync_FutileWakeups->inc() ;
- }
- ++ nWakeups ;
-
- // Assuming this is not a spurious wakeup we'll normally find _succ == Self.
- // We can defer clearing _succ until after the spin completes
- // TrySpin() must tolerate being called with _succ == Self.
- // Try yet another round of adaptive spinning.
- if ((Knob_SpinAfterFutile & 1) && TrySpin (Self) > 0) break ;
-
- // We can find that we were unpark()ed and redesignated _succ while
- // we were spinning. That's harmless. If we iterate and call park(),
- // park() will consume the event and return immediately and we'll
- // just spin again. This pattern can repeat, leaving _succ to simply
- // spin on a CPU. Enable Knob_ResetEvent to clear pending unparks().
- // Alternately, we can sample fired() here, and if set, forgo spinning
- // in the next iteration.
-
- if ((Knob_ResetEvent & 1) && Self->_ParkEvent->fired()) {
- Self->_ParkEvent->reset() ;
- OrderAccess::fence() ;
- }
- if (_succ == Self) _succ = NULL ;
-
- // Invariant: after clearing _succ a thread *must* retry _owner before parking.
- OrderAccess::fence() ;
- }
-
- // Egress :
- // Self has acquired the lock -- Unlink Self from the cxq or EntryList.
- // Normally we'll find Self on the EntryList .
- // From the perspective of the lock owner (this thread), the
- // EntryList is stable and cxq is prepend-only.
- // The head of cxq is volatile but the interior is stable.
- // In addition, Self.TState is stable.
-
- assert (_owner == Self , "invariant") ;
- assert (object() != NULL , "invariant") ;
- // I'd like to write:
- // guarantee (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
- // but as we're at a safepoint that's not safe.
-
- UnlinkAfterAcquire (Self, &node) ;
- if (_succ == Self) _succ = NULL ;
-
- assert (_succ != Self, "invariant") ;
- if (_Responsible == Self) {
- _Responsible = NULL ;
- // Dekker pivot-point.
- // Consider OrderAccess::storeload() here
-
- // We may leave threads on cxq|EntryList without a designated
- // "Responsible" thread. This is benign. When this thread subsequently
- // exits the monitor it can "see" such preexisting "old" threads --
- // threads that arrived on the cxq|EntryList before the fence, above --
- // by LDing cxq|EntryList. Newly arrived threads -- that is, threads
- // that arrive on cxq after the ST:MEMBAR, above -- will set Responsible
- // non-null and elect a new "Responsible" timer thread.
- //
- // This thread executes:
- // ST Responsible=null; MEMBAR (in enter epilog - here)
- // LD cxq|EntryList (in subsequent exit)
- //
- // Entering threads in the slow/contended path execute:
- // ST cxq=nonnull; MEMBAR; LD Responsible (in enter prolog)
- // The (ST cxq; MEMBAR) is accomplished with CAS().
- //
- // The MEMBAR, above, prevents the LD of cxq|EntryList in the subsequent
- // exit operation from floating above the ST Responsible=null.
- //
- // In *practice* however, EnterI() is always followed by some atomic
- // operation such as the decrement of _count in ::enter(). Those atomics
- // obviate the need for the explicit MEMBAR, above.
- }
-
- // We've acquired ownership with CAS().
- // CAS is serializing -- it has MEMBAR/FENCE-equivalent semantics.
- // But since the CAS() this thread may have also stored into _succ,
- // EntryList, cxq or Responsible. These meta-data updates must be
- // visible __before this thread subsequently drops the lock.
- // Consider what could occur if we didn't enforce this constraint --
- // STs to monitor meta-data and user-data could reorder with (become
- // visible after) the ST in exit that drops ownership of the lock.
- // Some other thread could then acquire the lock, but observe inconsistent
- // or old monitor meta-data and heap data. That violates the JMM.
- // To that end, the 1-0 exit() operation must have at least STST|LDST
- // "release" barrier semantics. Specifically, there must be at least a
- // STST|LDST barrier in exit() before the ST of null into _owner that drops
- // the lock. The barrier ensures that changes to monitor meta-data and data
- // protected by the lock will be visible before we release the lock, and
- // therefore before some other thread (CPU) has a chance to acquire the lock.
- // See also: http://gee.cs.oswego.edu/dl/jmm/cookbook.html.
- //
- // Critically, any prior STs to _succ or EntryList must be visible before
- // the ST of null into _owner in the *subsequent* (following) corresponding
- // monitorexit. Recall too, that in 1-0 mode monitorexit does not necessarily
- // execute a serializing instruction.
-
- if (SyncFlags & 8) {
- OrderAccess::fence() ;
- }
- return ;
-}
-
-// ExitSuspendEquivalent:
-// A faster alternate to handle_special_suspend_equivalent_condition()
-//
-// handle_special_suspend_equivalent_condition() unconditionally
-// acquires the SR_lock. On some platforms uncontended MutexLocker()
-// operations have high latency. Note that in ::enter() we call HSSEC
-// while holding the monitor, so we effectively lengthen the critical sections.
-//
-// There are a number of possible solutions:
-//
-// A. To ameliorate the problem we might also defer state transitions
-// to as late as possible -- just prior to parking.
-// Given that, we'd call HSSEC after having returned from park(),
-// but before attempting to acquire the monitor. This is only a
-// partial solution. It avoids calling HSSEC while holding the
-// monitor (good), but it still increases successor reacquisition latency --
-// the interval between unparking a successor and the time the successor
-// resumes and retries the lock. See ReenterI(), which defers state transitions.
-// If we use this technique we can also avoid EnterI()-exit() loop
-// in ::enter() where we iteratively drop the lock and then attempt
-// to reacquire it after suspending.
-//
-// B. In the future we might fold all the suspend bits into a
-// composite per-thread suspend flag and then update it with CAS().
-// Alternately, a Dekker-like mechanism with multiple variables
-// would suffice:
-// ST Self->_suspend_equivalent = false
-// MEMBAR
-// LD Self_>_suspend_flags
-//
-
-
-bool ObjectMonitor::ExitSuspendEquivalent (JavaThread * jSelf) {
- int Mode = Knob_FastHSSEC ;
- if (Mode && !jSelf->is_external_suspend()) {
- assert (jSelf->is_suspend_equivalent(), "invariant") ;
- jSelf->clear_suspend_equivalent() ;
- if (2 == Mode) OrderAccess::storeload() ;
- if (!jSelf->is_external_suspend()) return false ;
- // We raced a suspension -- fall thru into the slow path
- TEVENT (ExitSuspendEquivalent - raced) ;
- jSelf->set_suspend_equivalent() ;
- }
- return jSelf->handle_special_suspend_equivalent_condition() ;
-}
-
-
-// ReenterI() is a specialized inline form of the latter half of the
-// contended slow-path from EnterI(). We use ReenterI() only for
-// monitor reentry in wait().
-//
-// In the future we should reconcile EnterI() and ReenterI(), adding
-// Knob_Reset and Knob_SpinAfterFutile support and restructuring the
-// loop accordingly.
-
-void ATTR ObjectMonitor::ReenterI (Thread * Self, ObjectWaiter * SelfNode) {
- assert (Self != NULL , "invariant") ;
- assert (SelfNode != NULL , "invariant") ;
- assert (SelfNode->_thread == Self , "invariant") ;
- assert (_waiters > 0 , "invariant") ;
- assert (((oop)(object()))->mark() == markOopDesc::encode(this) , "invariant") ;
- assert (((JavaThread *)Self)->thread_state() != _thread_blocked, "invariant") ;
- JavaThread * jt = (JavaThread *) Self ;
-
- int nWakeups = 0 ;
- for (;;) {
- ObjectWaiter::TStates v = SelfNode->TState ;
- guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
- assert (_owner != Self, "invariant") ;
-
- if (TryLock (Self) > 0) break ;
- if (TrySpin (Self) > 0) break ;
-
- TEVENT (Wait Reentry - parking) ;
-
- // State transition wrappers around park() ...
- // ReenterI() wisely defers state transitions until
- // it's clear we must park the thread.
- {
- OSThreadContendState osts(Self->osthread());
- ThreadBlockInVM tbivm(jt);
-
- // cleared by handle_special_suspend_equivalent_condition()
- // or java_suspend_self()
- jt->set_suspend_equivalent();
- if (SyncFlags & 1) {
- Self->_ParkEvent->park ((jlong)1000) ;
- } else {
- Self->_ParkEvent->park () ;
- }
-
- // were we externally suspended while we were waiting?
- for (;;) {
- if (!ExitSuspendEquivalent (jt)) break ;
- if (_succ == Self) { _succ = NULL; OrderAccess::fence(); }
- jt->java_suspend_self();
- jt->set_suspend_equivalent();
- }
- }
-
- // Try again, but just so we distinguish between futile wakeups and
- // successful wakeups. The following test isn't algorithmically
- // necessary, but it helps us maintain sensible statistics.
- if (TryLock(Self) > 0) break ;
-
- // The lock is still contested.
- // Keep a tally of the # of futile wakeups.
- // Note that the counter is not protected by a lock or updated by atomics.
- // That is by design - we trade "lossy" counters which are exposed to
- // races during updates for a lower probe effect.
- TEVENT (Wait Reentry - futile wakeup) ;
- ++ nWakeups ;
-
- // Assuming this is not a spurious wakeup we'll normally
- // find that _succ == Self.
- if (_succ == Self) _succ = NULL ;
-
- // Invariant: after clearing _succ a contending thread
- // *must* retry _owner before parking.
- OrderAccess::fence() ;
-
- if (ObjectSynchronizer::_sync_FutileWakeups != NULL) {
- ObjectSynchronizer::_sync_FutileWakeups->inc() ;
- }
- }
-
- // Self has acquired the lock -- Unlink Self from the cxq or EntryList .
- // Normally we'll find Self on the EntryList.
- // Unlinking from the EntryList is constant-time and atomic-free.
- // From the perspective of the lock owner (this thread), the
- // EntryList is stable and cxq is prepend-only.
- // The head of cxq is volatile but the interior is stable.
- // In addition, Self.TState is stable.
-
- assert (_owner == Self, "invariant") ;
- assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
- UnlinkAfterAcquire (Self, SelfNode) ;
- if (_succ == Self) _succ = NULL ;
- assert (_succ != Self, "invariant") ;
- SelfNode->TState = ObjectWaiter::TS_RUN ;
- OrderAccess::fence() ; // see comments at the end of EnterI()
-}
-
-bool ObjectMonitor::try_enter(Thread* THREAD) {
- if (THREAD != _owner) {
- if (THREAD->is_lock_owned ((address)_owner)) {
- assert(_recursions == 0, "internal state error");
- _owner = THREAD ;
- _recursions = 1 ;
- OwnerIsThread = 1 ;
- return true;
- }
- if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
- return false;
- }
- return true;
- } else {
- _recursions++;
- return true;
- }
-}
-
-void ATTR ObjectMonitor::enter(TRAPS) {
- // The following code is ordered to check the most common cases first
- // and to reduce RTS->RTO cache line upgrades on SPARC and IA32 processors.
- Thread * const Self = THREAD ;
- void * cur ;
-
- cur = Atomic::cmpxchg_ptr (Self, &_owner, NULL) ;
- if (cur == NULL) {
- // Either ASSERT _recursions == 0 or explicitly set _recursions = 0.
- assert (_recursions == 0 , "invariant") ;
- assert (_owner == Self, "invariant") ;
- // CONSIDER: set or assert OwnerIsThread == 1
- return ;
- }
-
- if (cur == Self) {
- // TODO-FIXME: check for integer overflow! BUGID 6557169.
- _recursions ++ ;
- return ;
- }
-
- if (Self->is_lock_owned ((address)cur)) {
- assert (_recursions == 0, "internal state error");
- _recursions = 1 ;
- // Commute owner from a thread-specific on-stack BasicLockObject address to
- // a full-fledged "Thread *".
- _owner = Self ;
- OwnerIsThread = 1 ;
- return ;
- }
-
- // We've encountered genuine contention.
- assert (Self->_Stalled == 0, "invariant") ;
- Self->_Stalled = intptr_t(this) ;
-
- // Try one round of spinning *before* enqueueing Self
- // and before going through the awkward and expensive state
- // transitions. The following spin is strictly optional ...
- // Note that if we acquire the monitor from an initial spin
- // we forgo posting JVMTI events and firing DTRACE probes.
- if (Knob_SpinEarly && TrySpin (Self) > 0) {
- assert (_owner == Self , "invariant") ;
- assert (_recursions == 0 , "invariant") ;
- assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
- Self->_Stalled = 0 ;
- return ;
- }
-
- assert (_owner != Self , "invariant") ;
- assert (_succ != Self , "invariant") ;
- assert (Self->is_Java_thread() , "invariant") ;
- JavaThread * jt = (JavaThread *) Self ;
- assert (!SafepointSynchronize::is_at_safepoint(), "invariant") ;
- assert (jt->thread_state() != _thread_blocked , "invariant") ;
- assert (this->object() != NULL , "invariant") ;
- assert (_count >= 0, "invariant") ;
-
- // Prevent deflation at STW-time. See deflate_idle_monitors() and is_busy().
- // Ensure the object-monitor relationship remains stable while there's contention.
- Atomic::inc_ptr(&_count);
-
- { // Change java thread status to indicate blocked on monitor enter.
- JavaThreadBlockedOnMonitorEnterState jtbmes(jt, this);
-
- DTRACE_MONITOR_PROBE(contended__enter, this, object(), jt);
- if (JvmtiExport::should_post_monitor_contended_enter()) {
- JvmtiExport::post_monitor_contended_enter(jt, this);
- }
-
- OSThreadContendState osts(Self->osthread());
- ThreadBlockInVM tbivm(jt);
-
- Self->set_current_pending_monitor(this);
-
- // TODO-FIXME: change the following for(;;) loop to straight-line code.
- for (;;) {
- jt->set_suspend_equivalent();
- // cleared by handle_special_suspend_equivalent_condition()
- // or java_suspend_self()
-
- EnterI (THREAD) ;
-
- if (!ExitSuspendEquivalent(jt)) break ;
-
- //
- // We have acquired the contended monitor, but while we were
- // waiting another thread suspended us. We don't want to enter
- // the monitor while suspended because that would surprise the
- // thread that suspended us.
- //
- _recursions = 0 ;
- _succ = NULL ;
- exit (Self) ;
-
- jt->java_suspend_self();
- }
- Self->set_current_pending_monitor(NULL);
- }
-
- Atomic::dec_ptr(&_count);
- assert (_count >= 0, "invariant") ;
- Self->_Stalled = 0 ;
-
- // Must either set _recursions = 0 or ASSERT _recursions == 0.
- assert (_recursions == 0 , "invariant") ;
- assert (_owner == Self , "invariant") ;
- assert (_succ != Self , "invariant") ;
- assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
-
- // The thread -- now the owner -- is back in vm mode.
- // Report the glorious news via TI,DTrace and jvmstat.
- // The probe effect is non-trivial. All the reportage occurs
- // while we hold the monitor, increasing the length of the critical
- // section. Amdahl's parallel speedup law comes vividly into play.
- //
- // Another option might be to aggregate the events (thread local or
- // per-monitor aggregation) and defer reporting until a more opportune
- // time -- such as next time some thread encounters contention but has
- // yet to acquire the lock. While spinning that thread could
- // spinning we could increment JVMStat counters, etc.
-
- DTRACE_MONITOR_PROBE(contended__entered, this, object(), jt);
- if (JvmtiExport::should_post_monitor_contended_entered()) {
- JvmtiExport::post_monitor_contended_entered(jt, this);
- }
- if (ObjectSynchronizer::_sync_ContendedLockAttempts != NULL) {
- ObjectSynchronizer::_sync_ContendedLockAttempts->inc() ;
- }
-}
-
-void ObjectMonitor::ExitEpilog (Thread * Self, ObjectWaiter * Wakee) {
- assert (_owner == Self, "invariant") ;
-
- // Exit protocol:
- // 1. ST _succ = wakee
- // 2. membar #loadstore|#storestore;
- // 2. ST _owner = NULL
- // 3. unpark(wakee)
-
- _succ = Knob_SuccEnabled ? Wakee->_thread : NULL ;
- ParkEvent * Trigger = Wakee->_event ;
+};
- // Hygiene -- once we've set _owner = NULL we can't safely dereference Wakee again.
- // The thread associated with Wakee may have grabbed the lock and "Wakee" may be
- // out-of-scope (non-extant).
- Wakee = NULL ;
-
- // Drop the lock
- OrderAccess::release_store_ptr (&_owner, NULL) ;
- OrderAccess::fence() ; // ST _owner vs LD in unpark()
-
- // TODO-FIXME:
- // If there's a safepoint pending the best policy would be to
- // get _this thread to a safepoint and only wake the successor
- // after the safepoint completed. monitorexit uses a "leaf"
- // state transition, however, so this thread can't become
- // safe at this point in time. (Its stack isn't walkable).
- // The next best thing is to defer waking the successor by
- // adding to a list of thread to be unparked after at the
- // end of the forthcoming STW).
- if (SafepointSynchronize::do_call_back()) {
- TEVENT (unpark before SAFEPOINT) ;
- }
-
- // Possible optimizations ...
- //
- // * Consider: set Wakee->UnparkTime = timeNow()
- // When the thread wakes up it'll compute (timeNow() - Self->UnparkTime()).
- // By measuring recent ONPROC latency we can approximate the
- // system load. In turn, we can feed that information back
- // into the spinning & succession policies.
- // (ONPROC latency correlates strongly with load).
- //
- // * Pull affinity:
- // If the wakee is cold then transiently setting it's affinity
- // to the current CPU is a good idea.
- // See http://j2se.east/~dice/PERSIST/050624-PullAffinity.txt
- DTRACE_MONITOR_PROBE(contended__exit, this, object(), Self);
- Trigger->unpark() ;
-
- // Maintain stats and report events to JVMTI
- if (ObjectSynchronizer::_sync_Parks != NULL) {
- ObjectSynchronizer::_sync_Parks->inc() ;
- }
-}
-
-
-// exit()
-// ~~~~~~
-// Note that the collector can't reclaim the objectMonitor or deflate
-// the object out from underneath the thread calling ::exit() as the
-// thread calling ::exit() never transitions to a stable state.
-// This inhibits GC, which in turn inhibits asynchronous (and
-// inopportune) reclamation of "this".
-//
-// We'd like to assert that: (THREAD->thread_state() != _thread_blocked) ;
-// There's one exception to the claim above, however. EnterI() can call
-// exit() to drop a lock if the acquirer has been externally suspended.
-// In that case exit() is called with _thread_state as _thread_blocked,
-// but the monitor's _count field is > 0, which inhibits reclamation.
-//
-// 1-0 exit
-// ~~~~~~~~
-// ::exit() uses a canonical 1-1 idiom with a MEMBAR although some of
-// the fast-path operators have been optimized so the common ::exit()
-// operation is 1-0. See i486.ad fast_unlock(), for instance.
-// The code emitted by fast_unlock() elides the usual MEMBAR. This
-// greatly improves latency -- MEMBAR and CAS having considerable local
-// latency on modern processors -- but at the cost of "stranding". Absent the
-// MEMBAR, a thread in fast_unlock() can race a thread in the slow
-// ::enter() path, resulting in the entering thread being stranding
-// and a progress-liveness failure. Stranding is extremely rare.
-// We use timers (timed park operations) & periodic polling to detect
-// and recover from stranding. Potentially stranded threads periodically
-// wake up and poll the lock. See the usage of the _Responsible variable.
-//
-// The CAS() in enter provides for safety and exclusion, while the CAS or
-// MEMBAR in exit provides for progress and avoids stranding. 1-0 locking
-// eliminates the CAS/MEMBAR from the exist path, but it admits stranding.
-// We detect and recover from stranding with timers.
+// Release all inflated monitors owned by THREAD. Lightweight monitors are
+// ignored. This is meant to be called during JNI thread detach which assumes
+// all remaining monitors are heavyweight. All exceptions are swallowed.
+// Scanning the extant monitor list can be time consuming.
+// A simple optimization is to add a per-thread flag that indicates a thread
+// called jni_monitorenter() during its lifetime.
//
-// If a thread transiently strands it'll park until (a) another
-// thread acquires the lock and then drops the lock, at which time the
-// exiting thread will notice and unpark the stranded thread, or, (b)
-// the timer expires. If the lock is high traffic then the stranding latency
-// will be low due to (a). If the lock is low traffic then the odds of
-// stranding are lower, although the worst-case stranding latency
-// is longer. Critically, we don't want to put excessive load in the
-// platform's timer subsystem. We want to minimize both the timer injection
-// rate (timers created/sec) as well as the number of timers active at
-// any one time. (more precisely, we want to minimize timer-seconds, which is
-// the integral of the # of active timers at any instant over time).
-// Both impinge on OS scalability. Given that, at most one thread parked on
-// a monitor will use a timer.
-
-void ATTR ObjectMonitor::exit(TRAPS) {
- Thread * Self = THREAD ;
- if (THREAD != _owner) {
- if (THREAD->is_lock_owned((address) _owner)) {
- // Transmute _owner from a BasicLock pointer to a Thread address.
- // We don't need to hold _mutex for this transition.
- // Non-null to Non-null is safe as long as all readers can
- // tolerate either flavor.
- assert (_recursions == 0, "invariant") ;
- _owner = THREAD ;
- _recursions = 0 ;
- OwnerIsThread = 1 ;
- } else {
- // NOTE: we need to handle unbalanced monitor enter/exit
- // in native code by throwing an exception.
- // TODO: Throw an IllegalMonitorStateException ?
- TEVENT (Exit - Throw IMSX) ;
- assert(false, "Non-balanced monitor enter/exit!");
- if (false) {
- THROW(vmSymbols::java_lang_IllegalMonitorStateException());
- }
- return;
- }
- }
-
- if (_recursions != 0) {
- _recursions--; // this is simple recursive enter
- TEVENT (Inflated exit - recursive) ;
- return ;
- }
-
- // Invariant: after setting Responsible=null an thread must execute
- // a MEMBAR or other serializing instruction before fetching EntryList|cxq.
- if ((SyncFlags & 4) == 0) {
- _Responsible = NULL ;
- }
-
- for (;;) {
- assert (THREAD == _owner, "invariant") ;
-
- // Fast-path monitor exit:
- //
- // Observe the Dekker/Lamport duality:
- // A thread in ::exit() executes:
- // ST Owner=null; MEMBAR; LD EntryList|cxq.
- // A thread in the contended ::enter() path executes the complementary:
- // ST EntryList|cxq = nonnull; MEMBAR; LD Owner.
- //
- // Note that there's a benign race in the exit path. We can drop the
- // lock, another thread can reacquire the lock immediately, and we can
- // then wake a thread unnecessarily (yet another flavor of futile wakeup).
- // This is benign, and we've structured the code so the windows are short
- // and the frequency of such futile wakeups is low.
- //
- // We could eliminate the race by encoding both the "LOCKED" state and
- // the queue head in a single word. Exit would then use either CAS to
- // clear the LOCKED bit/byte. This precludes the desirable 1-0 optimization,
- // however.
- //
- // Possible fast-path ::exit() optimization:
- // The current fast-path exit implementation fetches both cxq and EntryList.
- // See also i486.ad fast_unlock(). Testing has shown that two LDs
- // isn't measurably slower than a single LD on any platforms.
- // Still, we could reduce the 2 LDs to one or zero by one of the following:
- //
- // - Use _count instead of cxq|EntryList
- // We intend to eliminate _count, however, when we switch
- // to on-the-fly deflation in ::exit() as is used in
- // Metalocks and RelaxedLocks.
- //
- // - Establish the invariant that cxq == null implies EntryList == null.
- // set cxq == EMPTY (1) to encode the state where cxq is empty
- // by EntryList != null. EMPTY is a distinguished value.
- // The fast-path exit() would fetch cxq but not EntryList.
- //
- // - Encode succ as follows:
- // succ = t : Thread t is the successor -- t is ready or is spinning.
- // Exiting thread does not need to wake a successor.
- // succ = 0 : No successor required -> (EntryList|cxq) == null
- // Exiting thread does not need to wake a successor
- // succ = 1 : Successor required -> (EntryList|cxq) != null and
- // logically succ == null.
- // Exiting thread must wake a successor.
- //
- // The 1-1 fast-exit path would appear as :
- // _owner = null ; membar ;
- // if (_succ == 1 && CAS (&_owner, null, Self) == null) goto SlowPath
- // goto FastPathDone ;
- //
- // and the 1-0 fast-exit path would appear as:
- // if (_succ == 1) goto SlowPath
- // Owner = null ;
- // goto FastPathDone
- //
- // - Encode the LSB of _owner as 1 to indicate that exit()
- // must use the slow-path and make a successor ready.
- // (_owner & 1) == 0 IFF succ != null || (EntryList|cxq) == null
- // (_owner & 1) == 0 IFF succ == null && (EntryList|cxq) != null (obviously)
- // The 1-0 fast exit path would read:
- // if (_owner != Self) goto SlowPath
- // _owner = null
- // goto FastPathDone
-
- if (Knob_ExitPolicy == 0) {
- // release semantics: prior loads and stores from within the critical section
- // must not float (reorder) past the following store that drops the lock.
- // On SPARC that requires MEMBAR #loadstore|#storestore.
- // But of course in TSO #loadstore|#storestore is not required.
- // I'd like to write one of the following:
- // A. OrderAccess::release() ; _owner = NULL
- // B. OrderAccess::loadstore(); OrderAccess::storestore(); _owner = NULL;
- // Unfortunately OrderAccess::release() and OrderAccess::loadstore() both
- // store into a _dummy variable. That store is not needed, but can result
- // in massive wasteful coherency traffic on classic SMP systems.
- // Instead, I use release_store(), which is implemented as just a simple
- // ST on x64, x86 and SPARC.
- OrderAccess::release_store_ptr (&_owner, NULL) ; // drop the lock
- OrderAccess::storeload() ; // See if we need to wake a successor
- if ((intptr_t(_EntryList)|intptr_t(_cxq)) == 0 || _succ != NULL) {
- TEVENT (Inflated exit - simple egress) ;
- return ;
- }
- TEVENT (Inflated exit - complex egress) ;
-
- // Normally the exiting thread is responsible for ensuring succession,
- // but if other successors are ready or other entering threads are spinning
- // then this thread can simply store NULL into _owner and exit without
- // waking a successor. The existence of spinners or ready successors
- // guarantees proper succession (liveness). Responsibility passes to the
- // ready or running successors. The exiting thread delegates the duty.
- // More precisely, if a successor already exists this thread is absolved
- // of the responsibility of waking (unparking) one.
- //
- // The _succ variable is critical to reducing futile wakeup frequency.
- // _succ identifies the "heir presumptive" thread that has been made
- // ready (unparked) but that has not yet run. We need only one such
- // successor thread to guarantee progress.
- // See http://www.usenix.org/events/jvm01/full_papers/dice/dice.pdf
- // section 3.3 "Futile Wakeup Throttling" for details.
- //
- // Note that spinners in Enter() also set _succ non-null.
- // In the current implementation spinners opportunistically set
- // _succ so that exiting threads might avoid waking a successor.
- // Another less appealing alternative would be for the exiting thread
- // to drop the lock and then spin briefly to see if a spinner managed
- // to acquire the lock. If so, the exiting thread could exit
- // immediately without waking a successor, otherwise the exiting
- // thread would need to dequeue and wake a successor.
- // (Note that we'd need to make the post-drop spin short, but no
- // shorter than the worst-case round-trip cache-line migration time.
- // The dropped lock needs to become visible to the spinner, and then
- // the acquisition of the lock by the spinner must become visible to
- // the exiting thread).
- //
-
- // It appears that an heir-presumptive (successor) must be made ready.
- // Only the current lock owner can manipulate the EntryList or
- // drain _cxq, so we need to reacquire the lock. If we fail
- // to reacquire the lock the responsibility for ensuring succession
- // falls to the new owner.
- //
- if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
- return ;
- }
- TEVENT (Exit - Reacquired) ;
- } else {
- if ((intptr_t(_EntryList)|intptr_t(_cxq)) == 0 || _succ != NULL) {
- OrderAccess::release_store_ptr (&_owner, NULL) ; // drop the lock
- OrderAccess::storeload() ;
- // Ratify the previously observed values.
- if (_cxq == NULL || _succ != NULL) {
- TEVENT (Inflated exit - simple egress) ;
- return ;
- }
-
- // inopportune interleaving -- the exiting thread (this thread)
- // in the fast-exit path raced an entering thread in the slow-enter
- // path.
- // We have two choices:
- // A. Try to reacquire the lock.
- // If the CAS() fails return immediately, otherwise
- // we either restart/rerun the exit operation, or simply
- // fall-through into the code below which wakes a successor.
- // B. If the elements forming the EntryList|cxq are TSM
- // we could simply unpark() the lead thread and return
- // without having set _succ.
- if (Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) != NULL) {
- TEVENT (Inflated exit - reacquired succeeded) ;
- return ;
- }
- TEVENT (Inflated exit - reacquired failed) ;
- } else {
- TEVENT (Inflated exit - complex egress) ;
- }
- }
-
- guarantee (_owner == THREAD, "invariant") ;
-
- // Select an appropriate successor ("heir presumptive") from the EntryList
- // and make it ready. Generally we just wake the head of EntryList .
- // There's no algorithmic constraint that we use the head - it's just
- // a policy decision. Note that the thread at head of the EntryList
- // remains at the head until it acquires the lock. This means we'll
- // repeatedly wake the same thread until it manages to grab the lock.
- // This is generally a good policy - if we're seeing lots of futile wakeups
- // at least we're waking/rewaking a thread that's like to be hot or warm
- // (have residual D$ and TLB affinity).
- //
- // "Wakeup locality" optimization:
- // http://j2se.east/~dice/PERSIST/040825-WakeLocality.txt
- // In the future we'll try to bias the selection mechanism
- // to preferentially pick a thread that recently ran on
- // a processor element that shares cache with the CPU on which
- // the exiting thread is running. We need access to Solaris'
- // schedctl.sc_cpu to make that work.
- //
- ObjectWaiter * w = NULL ;
- int QMode = Knob_QMode ;
-
- if (QMode == 2 && _cxq != NULL) {
- // QMode == 2 : cxq has precedence over EntryList.
- // Try to directly wake a successor from the cxq.
- // If successful, the successor will need to unlink itself from cxq.
- w = _cxq ;
- assert (w != NULL, "invariant") ;
- assert (w->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
- ExitEpilog (Self, w) ;
- return ;
- }
-
- if (QMode == 3 && _cxq != NULL) {
- // Aggressively drain cxq into EntryList at the first opportunity.
- // This policy ensure that recently-run threads live at the head of EntryList.
- // Drain _cxq into EntryList - bulk transfer.
- // First, detach _cxq.
- // The following loop is tantamount to: w = swap (&cxq, NULL)
- w = _cxq ;
- for (;;) {
- assert (w != NULL, "Invariant") ;
- ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
- if (u == w) break ;
- w = u ;
- }
- assert (w != NULL , "invariant") ;
-
- ObjectWaiter * q = NULL ;
- ObjectWaiter * p ;
- for (p = w ; p != NULL ; p = p->_next) {
- guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
- p->TState = ObjectWaiter::TS_ENTER ;
- p->_prev = q ;
- q = p ;
- }
-
- // Append the RATs to the EntryList
- // TODO: organize EntryList as a CDLL so we can locate the tail in constant-time.
- ObjectWaiter * Tail ;
- for (Tail = _EntryList ; Tail != NULL && Tail->_next != NULL ; Tail = Tail->_next) ;
- if (Tail == NULL) {
- _EntryList = w ;
- } else {
- Tail->_next = w ;
- w->_prev = Tail ;
- }
-
- // Fall thru into code that tries to wake a successor from EntryList
- }
-
- if (QMode == 4 && _cxq != NULL) {
- // Aggressively drain cxq into EntryList at the first opportunity.
- // This policy ensure that recently-run threads live at the head of EntryList.
-
- // Drain _cxq into EntryList - bulk transfer.
- // First, detach _cxq.
- // The following loop is tantamount to: w = swap (&cxq, NULL)
- w = _cxq ;
- for (;;) {
- assert (w != NULL, "Invariant") ;
- ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
- if (u == w) break ;
- w = u ;
- }
- assert (w != NULL , "invariant") ;
-
- ObjectWaiter * q = NULL ;
- ObjectWaiter * p ;
- for (p = w ; p != NULL ; p = p->_next) {
- guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
- p->TState = ObjectWaiter::TS_ENTER ;
- p->_prev = q ;
- q = p ;
- }
-
- // Prepend the RATs to the EntryList
- if (_EntryList != NULL) {
- q->_next = _EntryList ;
- _EntryList->_prev = q ;
- }
- _EntryList = w ;
-
- // Fall thru into code that tries to wake a successor from EntryList
- }
-
- w = _EntryList ;
- if (w != NULL) {
- // I'd like to write: guarantee (w->_thread != Self).
- // But in practice an exiting thread may find itself on the EntryList.
- // Lets say thread T1 calls O.wait(). Wait() enqueues T1 on O's waitset and
- // then calls exit(). Exit release the lock by setting O._owner to NULL.
- // Lets say T1 then stalls. T2 acquires O and calls O.notify(). The
- // notify() operation moves T1 from O's waitset to O's EntryList. T2 then
- // release the lock "O". T2 resumes immediately after the ST of null into
- // _owner, above. T2 notices that the EntryList is populated, so it
- // reacquires the lock and then finds itself on the EntryList.
- // Given all that, we have to tolerate the circumstance where "w" is
- // associated with Self.
- assert (w->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- ExitEpilog (Self, w) ;
- return ;
- }
-
- // If we find that both _cxq and EntryList are null then just
- // re-run the exit protocol from the top.
- w = _cxq ;
- if (w == NULL) continue ;
-
- // Drain _cxq into EntryList - bulk transfer.
- // First, detach _cxq.
- // The following loop is tantamount to: w = swap (&cxq, NULL)
- for (;;) {
- assert (w != NULL, "Invariant") ;
- ObjectWaiter * u = (ObjectWaiter *) Atomic::cmpxchg_ptr (NULL, &_cxq, w) ;
- if (u == w) break ;
- w = u ;
- }
- TEVENT (Inflated exit - drain cxq into EntryList) ;
-
- assert (w != NULL , "invariant") ;
- assert (_EntryList == NULL , "invariant") ;
-
- // Convert the LIFO SLL anchored by _cxq into a DLL.
- // The list reorganization step operates in O(LENGTH(w)) time.
- // It's critical that this step operate quickly as
- // "Self" still holds the outer-lock, restricting parallelism
- // and effectively lengthening the critical section.
- // Invariant: s chases t chases u.
- // TODO-FIXME: consider changing EntryList from a DLL to a CDLL so
- // we have faster access to the tail.
-
- if (QMode == 1) {
- // QMode == 1 : drain cxq to EntryList, reversing order
- // We also reverse the order of the list.
- ObjectWaiter * s = NULL ;
- ObjectWaiter * t = w ;
- ObjectWaiter * u = NULL ;
- while (t != NULL) {
- guarantee (t->TState == ObjectWaiter::TS_CXQ, "invariant") ;
- t->TState = ObjectWaiter::TS_ENTER ;
- u = t->_next ;
- t->_prev = u ;
- t->_next = s ;
- s = t;
- t = u ;
- }
- _EntryList = s ;
- assert (s != NULL, "invariant") ;
- } else {
- // QMode == 0 or QMode == 2
- _EntryList = w ;
- ObjectWaiter * q = NULL ;
- ObjectWaiter * p ;
- for (p = w ; p != NULL ; p = p->_next) {
- guarantee (p->TState == ObjectWaiter::TS_CXQ, "Invariant") ;
- p->TState = ObjectWaiter::TS_ENTER ;
- p->_prev = q ;
- q = p ;
- }
- }
-
- // In 1-0 mode we need: ST EntryList; MEMBAR #storestore; ST _owner = NULL
- // The MEMBAR is satisfied by the release_store() operation in ExitEpilog().
-
- // See if we can abdicate to a spinner instead of waking a thread.
- // A primary goal of the implementation is to reduce the
- // context-switch rate.
- if (_succ != NULL) continue;
-
- w = _EntryList ;
- if (w != NULL) {
- guarantee (w->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- ExitEpilog (Self, w) ;
- return ;
- }
- }
-}
-// complete_exit exits a lock returning recursion count
-// complete_exit/reenter operate as a wait without waiting
-// complete_exit requires an inflated monitor
-// The _owner field is not always the Thread addr even with an
-// inflated monitor, e.g. the monitor can be inflated by a non-owning
-// thread due to contention.
-intptr_t ObjectMonitor::complete_exit(TRAPS) {
- Thread * const Self = THREAD;
- assert(Self->is_Java_thread(), "Must be Java thread!");
- JavaThread *jt = (JavaThread *)THREAD;
-
- DeferredInitialize();
-
- if (THREAD != _owner) {
- if (THREAD->is_lock_owned ((address)_owner)) {
- assert(_recursions == 0, "internal state error");
- _owner = THREAD ; /* Convert from basiclock addr to Thread addr */
- _recursions = 0 ;
- OwnerIsThread = 1 ;
- }
- }
-
- guarantee(Self == _owner, "complete_exit not owner");
- intptr_t save = _recursions; // record the old recursion count
- _recursions = 0; // set the recursion level to be 0
- exit (Self) ; // exit the monitor
- guarantee (_owner != Self, "invariant");
- return save;
-}
-
-// reenter() enters a lock and sets recursion count
-// complete_exit/reenter operate as a wait without waiting
-void ObjectMonitor::reenter(intptr_t recursions, TRAPS) {
- Thread * const Self = THREAD;
- assert(Self->is_Java_thread(), "Must be Java thread!");
- JavaThread *jt = (JavaThread *)THREAD;
-
- guarantee(_owner != Self, "reenter already owner");
- enter (THREAD); // enter the monitor
- guarantee (_recursions == 0, "reenter recursion");
- _recursions = recursions;
- return;
-}
-
-// Note: a subset of changes to ObjectMonitor::wait()
-// will need to be replicated in complete_exit above
-void ObjectMonitor::wait(jlong millis, bool interruptible, TRAPS) {
- Thread * const Self = THREAD ;
- assert(Self->is_Java_thread(), "Must be Java thread!");
- JavaThread *jt = (JavaThread *)THREAD;
-
- DeferredInitialize () ;
-
- // Throw IMSX or IEX.
- CHECK_OWNER();
-
- // check for a pending interrupt
- if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
- // post monitor waited event. Note that this is past-tense, we are done waiting.
- if (JvmtiExport::should_post_monitor_waited()) {
- // Note: 'false' parameter is passed here because the
- // wait was not timed out due to thread interrupt.
- JvmtiExport::post_monitor_waited(jt, this, false);
- }
- TEVENT (Wait - Throw IEX) ;
- THROW(vmSymbols::java_lang_InterruptedException());
- return ;
- }
- TEVENT (Wait) ;
-
- assert (Self->_Stalled == 0, "invariant") ;
- Self->_Stalled = intptr_t(this) ;
- jt->set_current_waiting_monitor(this);
-
- // create a node to be put into the queue
- // Critically, after we reset() the event but prior to park(), we must check
- // for a pending interrupt.
- ObjectWaiter node(Self);
- node.TState = ObjectWaiter::TS_WAIT ;
- Self->_ParkEvent->reset() ;
- OrderAccess::fence(); // ST into Event; membar ; LD interrupted-flag
-
- // Enter the waiting queue, which is a circular doubly linked list in this case
- // but it could be a priority queue or any data structure.
- // _WaitSetLock protects the wait queue. Normally the wait queue is accessed only
- // by the the owner of the monitor *except* in the case where park()
- // returns because of a timeout of interrupt. Contention is exceptionally rare
- // so we use a simple spin-lock instead of a heavier-weight blocking lock.
-
- Thread::SpinAcquire (&_WaitSetLock, "WaitSet - add") ;
- AddWaiter (&node) ;
- Thread::SpinRelease (&_WaitSetLock) ;
-
- if ((SyncFlags & 4) == 0) {
- _Responsible = NULL ;
- }
- intptr_t save = _recursions; // record the old recursion count
- _waiters++; // increment the number of waiters
- _recursions = 0; // set the recursion level to be 1
- exit (Self) ; // exit the monitor
- guarantee (_owner != Self, "invariant") ;
-
- // As soon as the ObjectMonitor's ownership is dropped in the exit()
- // call above, another thread can enter() the ObjectMonitor, do the
- // notify(), and exit() the ObjectMonitor. If the other thread's
- // exit() call chooses this thread as the successor and the unpark()
- // call happens to occur while this thread is posting a
- // MONITOR_CONTENDED_EXIT event, then we run the risk of the event
- // handler using RawMonitors and consuming the unpark().
- //
- // To avoid the problem, we re-post the event. This does no harm
- // even if the original unpark() was not consumed because we are the
- // chosen successor for this monitor.
- if (node._notified != 0 && _succ == Self) {
- node._event->unpark();
- }
-
- // The thread is on the WaitSet list - now park() it.
- // On MP systems it's conceivable that a brief spin before we park
- // could be profitable.
- //
- // TODO-FIXME: change the following logic to a loop of the form
- // while (!timeout && !interrupted && _notified == 0) park()
-
- int ret = OS_OK ;
- int WasNotified = 0 ;
- { // State transition wrappers
- OSThread* osthread = Self->osthread();
- OSThreadWaitState osts(osthread, true);
- {
- ThreadBlockInVM tbivm(jt);
- // Thread is in thread_blocked state and oop access is unsafe.
- jt->set_suspend_equivalent();
-
- if (interruptible && (Thread::is_interrupted(THREAD, false) || HAS_PENDING_EXCEPTION)) {
- // Intentionally empty
- } else
- if (node._notified == 0) {
- if (millis <= 0) {
- Self->_ParkEvent->park () ;
- } else {
- ret = Self->_ParkEvent->park (millis) ;
- }
- }
-
- // were we externally suspended while we were waiting?
- if (ExitSuspendEquivalent (jt)) {
- // TODO-FIXME: add -- if succ == Self then succ = null.
- jt->java_suspend_self();
- }
-
- } // Exit thread safepoint: transition _thread_blocked -> _thread_in_vm
-
-
- // Node may be on the WaitSet, the EntryList (or cxq), or in transition
- // from the WaitSet to the EntryList.
- // See if we need to remove Node from the WaitSet.
- // We use double-checked locking to avoid grabbing _WaitSetLock
- // if the thread is not on the wait queue.
- //
- // Note that we don't need a fence before the fetch of TState.
- // In the worst case we'll fetch a old-stale value of TS_WAIT previously
- // written by the is thread. (perhaps the fetch might even be satisfied
- // by a look-aside into the processor's own store buffer, although given
- // the length of the code path between the prior ST and this load that's
- // highly unlikely). If the following LD fetches a stale TS_WAIT value
- // then we'll acquire the lock and then re-fetch a fresh TState value.
- // That is, we fail toward safety.
-
- if (node.TState == ObjectWaiter::TS_WAIT) {
- Thread::SpinAcquire (&_WaitSetLock, "WaitSet - unlink") ;
- if (node.TState == ObjectWaiter::TS_WAIT) {
- DequeueSpecificWaiter (&node) ; // unlink from WaitSet
- assert(node._notified == 0, "invariant");
- node.TState = ObjectWaiter::TS_RUN ;
- }
- Thread::SpinRelease (&_WaitSetLock) ;
- }
+// Instead of No_Savepoint_Verifier it might be cheaper to
+// use an idiom of the form:
+// auto int tmp = SafepointSynchronize::_safepoint_counter ;
+// <code that must not run at safepoint>
+// guarantee (((tmp ^ _safepoint_counter) | (tmp & 1)) == 0) ;
+// Since the tests are extremely cheap we could leave them enabled
+// for normal product builds.
- // The thread is now either on off-list (TS_RUN),
- // on the EntryList (TS_ENTER), or on the cxq (TS_CXQ).
- // The Node's TState variable is stable from the perspective of this thread.
- // No other threads will asynchronously modify TState.
- guarantee (node.TState != ObjectWaiter::TS_WAIT, "invariant") ;
- OrderAccess::loadload() ;
- if (_succ == Self) _succ = NULL ;
- WasNotified = node._notified ;
-
- // Reentry phase -- reacquire the monitor.
- // re-enter contended monitor after object.wait().
- // retain OBJECT_WAIT state until re-enter successfully completes
- // Thread state is thread_in_vm and oop access is again safe,
- // although the raw address of the object may have changed.
- // (Don't cache naked oops over safepoints, of course).
-
- // post monitor waited event. Note that this is past-tense, we are done waiting.
- if (JvmtiExport::should_post_monitor_waited()) {
- JvmtiExport::post_monitor_waited(jt, this, ret == OS_TIMEOUT);
- }
- OrderAccess::fence() ;
-
- assert (Self->_Stalled != 0, "invariant") ;
- Self->_Stalled = 0 ;
-
- assert (_owner != Self, "invariant") ;
- ObjectWaiter::TStates v = node.TState ;
- if (v == ObjectWaiter::TS_RUN) {
- enter (Self) ;
- } else {
- guarantee (v == ObjectWaiter::TS_ENTER || v == ObjectWaiter::TS_CXQ, "invariant") ;
- ReenterI (Self, &node) ;
- node.wait_reenter_end(this);
- }
-
- // Self has reacquired the lock.
- // Lifecycle - the node representing Self must not appear on any queues.
- // Node is about to go out-of-scope, but even if it were immortal we wouldn't
- // want residual elements associated with this thread left on any lists.
- guarantee (node.TState == ObjectWaiter::TS_RUN, "invariant") ;
- assert (_owner == Self, "invariant") ;
- assert (_succ != Self , "invariant") ;
- } // OSThreadWaitState()
-
- jt->set_current_waiting_monitor(NULL);
-
- guarantee (_recursions == 0, "invariant") ;
- _recursions = save; // restore the old recursion count
- _waiters--; // decrement the number of waiters
-
- // Verify a few postconditions
- assert (_owner == Self , "invariant") ;
- assert (_succ != Self , "invariant") ;
- assert (((oop)(object()))->mark() == markOopDesc::encode(this), "invariant") ;
-
- if (SyncFlags & 32) {
- OrderAccess::fence() ;
- }
-
- // check if the notification happened
- if (!WasNotified) {
- // no, it could be timeout or Thread.interrupt() or both
- // check for interrupt event, otherwise it is timeout
- if (interruptible && Thread::is_interrupted(Self, true) && !HAS_PENDING_EXCEPTION) {
- TEVENT (Wait - throw IEX from epilog) ;
- THROW(vmSymbols::java_lang_InterruptedException());
- }
- }
-
- // NOTE: Spurious wake up will be consider as timeout.
- // Monitor notify has precedence over thread interrupt.
-}
-
-
-// Consider:
-// If the lock is cool (cxq == null && succ == null) and we're on an MP system
-// then instead of transferring a thread from the WaitSet to the EntryList
-// we might just dequeue a thread from the WaitSet and directly unpark() it.
-
-void ObjectMonitor::notify(TRAPS) {
- CHECK_OWNER();
- if (_WaitSet == NULL) {
- TEVENT (Empty-Notify) ;
- return ;
- }
- DTRACE_MONITOR_PROBE(notify, this, object(), THREAD);
-
- int Policy = Knob_MoveNotifyee ;
-
- Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notify") ;
- ObjectWaiter * iterator = DequeueWaiter() ;
- if (iterator != NULL) {
- TEVENT (Notify1 - Transfer) ;
- guarantee (iterator->TState == ObjectWaiter::TS_WAIT, "invariant") ;
- guarantee (iterator->_notified == 0, "invariant") ;
- // Disposition - what might we do with iterator ?
- // a. add it directly to the EntryList - either tail or head.
- // b. push it onto the front of the _cxq.
- // For now we use (a).
- if (Policy != 4) {
- iterator->TState = ObjectWaiter::TS_ENTER ;
- }
- iterator->_notified = 1 ;
-
- ObjectWaiter * List = _EntryList ;
- if (List != NULL) {
- assert (List->_prev == NULL, "invariant") ;
- assert (List->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- assert (List != iterator, "invariant") ;
- }
-
- if (Policy == 0) { // prepend to EntryList
- if (List == NULL) {
- iterator->_next = iterator->_prev = NULL ;
- _EntryList = iterator ;
- } else {
- List->_prev = iterator ;
- iterator->_next = List ;
- iterator->_prev = NULL ;
- _EntryList = iterator ;
- }
- } else
- if (Policy == 1) { // append to EntryList
- if (List == NULL) {
- iterator->_next = iterator->_prev = NULL ;
- _EntryList = iterator ;
- } else {
- // CONSIDER: finding the tail currently requires a linear-time walk of
- // the EntryList. We can make tail access constant-time by converting to
- // a CDLL instead of using our current DLL.
- ObjectWaiter * Tail ;
- for (Tail = List ; Tail->_next != NULL ; Tail = Tail->_next) ;
- assert (Tail != NULL && Tail->_next == NULL, "invariant") ;
- Tail->_next = iterator ;
- iterator->_prev = Tail ;
- iterator->_next = NULL ;
- }
- } else
- if (Policy == 2) { // prepend to cxq
- // prepend to cxq
- if (List == NULL) {
- iterator->_next = iterator->_prev = NULL ;
- _EntryList = iterator ;
- } else {
- iterator->TState = ObjectWaiter::TS_CXQ ;
- for (;;) {
- ObjectWaiter * Front = _cxq ;
- iterator->_next = Front ;
- if (Atomic::cmpxchg_ptr (iterator, &_cxq, Front) == Front) {
- break ;
- }
- }
- }
- } else
- if (Policy == 3) { // append to cxq
- iterator->TState = ObjectWaiter::TS_CXQ ;
- for (;;) {
- ObjectWaiter * Tail ;
- Tail = _cxq ;
- if (Tail == NULL) {
- iterator->_next = NULL ;
- if (Atomic::cmpxchg_ptr (iterator, &_cxq, NULL) == NULL) {
- break ;
- }
- } else {
- while (Tail->_next != NULL) Tail = Tail->_next ;
- Tail->_next = iterator ;
- iterator->_prev = Tail ;
- iterator->_next = NULL ;
- break ;
- }
- }
- } else {
- ParkEvent * ev = iterator->_event ;
- iterator->TState = ObjectWaiter::TS_RUN ;
- OrderAccess::fence() ;
- ev->unpark() ;
- }
-
- if (Policy < 4) {
- iterator->wait_reenter_begin(this);
- }
-
- // _WaitSetLock protects the wait queue, not the EntryList. We could
- // move the add-to-EntryList operation, above, outside the critical section
- // protected by _WaitSetLock. In practice that's not useful. With the
- // exception of wait() timeouts and interrupts the monitor owner
- // is the only thread that grabs _WaitSetLock. There's almost no contention
- // on _WaitSetLock so it's not profitable to reduce the length of the
- // critical section.
- }
-
- Thread::SpinRelease (&_WaitSetLock) ;
-
- if (iterator != NULL && ObjectSynchronizer::_sync_Notifications != NULL) {
- ObjectSynchronizer::_sync_Notifications->inc() ;
- }
-}
-
-
-void ObjectMonitor::notifyAll(TRAPS) {
- CHECK_OWNER();
- ObjectWaiter* iterator;
- if (_WaitSet == NULL) {
- TEVENT (Empty-NotifyAll) ;
- return ;
- }
- DTRACE_MONITOR_PROBE(notifyAll, this, object(), THREAD);
-
- int Policy = Knob_MoveNotifyee ;
- int Tally = 0 ;
- Thread::SpinAcquire (&_WaitSetLock, "WaitSet - notifyall") ;
-
- for (;;) {
- iterator = DequeueWaiter () ;
- if (iterator == NULL) break ;
- TEVENT (NotifyAll - Transfer1) ;
- ++Tally ;
-
- // Disposition - what might we do with iterator ?
- // a. add it directly to the EntryList - either tail or head.
- // b. push it onto the front of the _cxq.
- // For now we use (a).
- //
- // TODO-FIXME: currently notifyAll() transfers the waiters one-at-a-time from the waitset
- // to the EntryList. This could be done more efficiently with a single bulk transfer,
- // but in practice it's not time-critical. Beware too, that in prepend-mode we invert the
- // order of the waiters. Lets say that the waitset is "ABCD" and the EntryList is "XYZ".
- // After a notifyAll() in prepend mode the waitset will be empty and the EntryList will
- // be "DCBAXYZ".
-
- guarantee (iterator->TState == ObjectWaiter::TS_WAIT, "invariant") ;
- guarantee (iterator->_notified == 0, "invariant") ;
- iterator->_notified = 1 ;
- if (Policy != 4) {
- iterator->TState = ObjectWaiter::TS_ENTER ;
- }
-
- ObjectWaiter * List = _EntryList ;
- if (List != NULL) {
- assert (List->_prev == NULL, "invariant") ;
- assert (List->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- assert (List != iterator, "invariant") ;
- }
-
- if (Policy == 0) { // prepend to EntryList
- if (List == NULL) {
- iterator->_next = iterator->_prev = NULL ;
- _EntryList = iterator ;
- } else {
- List->_prev = iterator ;
- iterator->_next = List ;
- iterator->_prev = NULL ;
- _EntryList = iterator ;
- }
- } else
- if (Policy == 1) { // append to EntryList
- if (List == NULL) {
- iterator->_next = iterator->_prev = NULL ;
- _EntryList = iterator ;
- } else {
- // CONSIDER: finding the tail currently requires a linear-time walk of
- // the EntryList. We can make tail access constant-time by converting to
- // a CDLL instead of using our current DLL.
- ObjectWaiter * Tail ;
- for (Tail = List ; Tail->_next != NULL ; Tail = Tail->_next) ;
- assert (Tail != NULL && Tail->_next == NULL, "invariant") ;
- Tail->_next = iterator ;
- iterator->_prev = Tail ;
- iterator->_next = NULL ;
- }
- } else
- if (Policy == 2) { // prepend to cxq
- // prepend to cxq
- iterator->TState = ObjectWaiter::TS_CXQ ;
- for (;;) {
- ObjectWaiter * Front = _cxq ;
- iterator->_next = Front ;
- if (Atomic::cmpxchg_ptr (iterator, &_cxq, Front) == Front) {
- break ;
- }
- }
- } else
- if (Policy == 3) { // append to cxq
- iterator->TState = ObjectWaiter::TS_CXQ ;
- for (;;) {
- ObjectWaiter * Tail ;
- Tail = _cxq ;
- if (Tail == NULL) {
- iterator->_next = NULL ;
- if (Atomic::cmpxchg_ptr (iterator, &_cxq, NULL) == NULL) {
- break ;
- }
- } else {
- while (Tail->_next != NULL) Tail = Tail->_next ;
- Tail->_next = iterator ;
- iterator->_prev = Tail ;
- iterator->_next = NULL ;
- break ;
- }
- }
- } else {
- ParkEvent * ev = iterator->_event ;
- iterator->TState = ObjectWaiter::TS_RUN ;
- OrderAccess::fence() ;
- ev->unpark() ;
- }
-
- if (Policy < 4) {
- iterator->wait_reenter_begin(this);
- }
-
- // _WaitSetLock protects the wait queue, not the EntryList. We could
- // move the add-to-EntryList operation, above, outside the critical section
- // protected by _WaitSetLock. In practice that's not useful. With the
- // exception of wait() timeouts and interrupts the monitor owner
- // is the only thread that grabs _WaitSetLock. There's almost no contention
- // on _WaitSetLock so it's not profitable to reduce the length of the
- // critical section.
- }
-
- Thread::SpinRelease (&_WaitSetLock) ;
-
- if (Tally != 0 && ObjectSynchronizer::_sync_Notifications != NULL) {
- ObjectSynchronizer::_sync_Notifications->inc(Tally) ;
- }
+void ObjectSynchronizer::release_monitors_owned_by_thread(TRAPS) {
+ assert(THREAD == JavaThread::current(), "must be current Java thread");
+ No_Safepoint_Verifier nsv ;
+ ReleaseJavaMonitorsClosure rjmc(THREAD);
+ Thread::muxAcquire(&ListLock, "release_monitors_owned_by_thread");
+ ObjectSynchronizer::monitors_iterate(&rjmc);
+ Thread::muxRelease(&ListLock);
+ THREAD->clear_pending_exception();
}
-// check_slow() is a misnomer. It's called to simply to throw an IMSX exception.
-// TODO-FIXME: remove check_slow() -- it's likely dead.
-
-void ObjectMonitor::check_slow(TRAPS) {
- TEVENT (check_slow - throw IMSX) ;
- assert(THREAD != _owner && !THREAD->is_lock_owned((address) _owner), "must not be owner");
- THROW_MSG(vmSymbols::java_lang_IllegalMonitorStateException(), "current thread not owner");
-}
-
-
-// -------------------------------------------------------------------------
-// The raw monitor subsystem is entirely distinct from normal
-// java-synchronization or jni-synchronization. raw monitors are not
-// associated with objects. They can be implemented in any manner
-// that makes sense. The original implementors decided to piggy-back
-// the raw-monitor implementation on the existing Java objectMonitor mechanism.
-// This flaw needs to fixed. We should reimplement raw monitors as sui-generis.
-// Specifically, we should not implement raw monitors via java monitors.
-// Time permitting, we should disentangle and deconvolve the two implementations
-// and move the resulting raw monitor implementation over to the JVMTI directories.
-// Ideally, the raw monitor implementation would be built on top of
-// park-unpark and nothing else.
-//
-// raw monitors are used mainly by JVMTI
-// The raw monitor implementation borrows the ObjectMonitor structure,
-// but the operators are degenerate and extremely simple.
-//
-// Mixed use of a single objectMonitor instance -- as both a raw monitor
-// and a normal java monitor -- is not permissible.
-//
-// Note that we use the single RawMonitor_lock to protect queue operations for
-// _all_ raw monitors. This is a scalability impediment, but since raw monitor usage
-// is deprecated and rare, this is not of concern. The RawMonitor_lock can not
-// be held indefinitely. The critical sections must be short and bounded.
-//
-// -------------------------------------------------------------------------
-
-int ObjectMonitor::SimpleEnter (Thread * Self) {
- for (;;) {
- if (Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
- return OS_OK ;
- }
-
- ObjectWaiter Node (Self) ;
- Self->_ParkEvent->reset() ; // strictly optional
- Node.TState = ObjectWaiter::TS_ENTER ;
-
- RawMonitor_lock->lock_without_safepoint_check() ;
- Node._next = _EntryList ;
- _EntryList = &Node ;
- OrderAccess::fence() ;
- if (_owner == NULL && Atomic::cmpxchg_ptr (Self, &_owner, NULL) == NULL) {
- _EntryList = Node._next ;
- RawMonitor_lock->unlock() ;
- return OS_OK ;
- }
- RawMonitor_lock->unlock() ;
- while (Node.TState == ObjectWaiter::TS_ENTER) {
- Self->_ParkEvent->park() ;
- }
- }
-}
-
-int ObjectMonitor::SimpleExit (Thread * Self) {
- guarantee (_owner == Self, "invariant") ;
- OrderAccess::release_store_ptr (&_owner, NULL) ;
- OrderAccess::fence() ;
- if (_EntryList == NULL) return OS_OK ;
- ObjectWaiter * w ;
-
- RawMonitor_lock->lock_without_safepoint_check() ;
- w = _EntryList ;
- if (w != NULL) {
- _EntryList = w->_next ;
- }
- RawMonitor_lock->unlock() ;
- if (w != NULL) {
- guarantee (w ->TState == ObjectWaiter::TS_ENTER, "invariant") ;
- ParkEvent * ev = w->_event ;
- w->TState = ObjectWaiter::TS_RUN ;
- OrderAccess::fence() ;
- ev->unpark() ;
- }
- return OS_OK ;
-}
-
-int ObjectMonitor::SimpleWait (Thread * Self, jlong millis) {
- guarantee (_owner == Self , "invariant") ;
- guarantee (_recursions == 0, "invariant") ;
-
- ObjectWaiter Node (Self) ;
- Node._notified = 0 ;
- Node.TState = ObjectWaiter::TS_WAIT ;
-
- RawMonitor_lock->lock_without_safepoint_check() ;
- Node._next = _WaitSet ;
- _WaitSet = &Node ;
- RawMonitor_lock->unlock() ;
-
- SimpleExit (Self) ;
- guarantee (_owner != Self, "invariant") ;
-
- int ret = OS_OK ;
- if (millis <= 0) {
- Self->_ParkEvent->park();
- } else {
- ret = Self->_ParkEvent->park(millis);
- }
-
- // If thread still resides on the waitset then unlink it.
- // Double-checked locking -- the usage is safe in this context
- // as we TState is volatile and the lock-unlock operators are
- // serializing (barrier-equivalent).
-
- if (Node.TState == ObjectWaiter::TS_WAIT) {
- RawMonitor_lock->lock_without_safepoint_check() ;
- if (Node.TState == ObjectWaiter::TS_WAIT) {
- // Simple O(n) unlink, but performance isn't critical here.
- ObjectWaiter * p ;
- ObjectWaiter * q = NULL ;
- for (p = _WaitSet ; p != &Node; p = p->_next) {
- q = p ;
- }
- guarantee (p == &Node, "invariant") ;
- if (q == NULL) {
- guarantee (p == _WaitSet, "invariant") ;
- _WaitSet = p->_next ;
- } else {
- guarantee (p == q->_next, "invariant") ;
- q->_next = p->_next ;
- }
- Node.TState = ObjectWaiter::TS_RUN ;
- }
- RawMonitor_lock->unlock() ;
- }
-
- guarantee (Node.TState == ObjectWaiter::TS_RUN, "invariant") ;
- SimpleEnter (Self) ;
-
- guarantee (_owner == Self, "invariant") ;
- guarantee (_recursions == 0, "invariant") ;
- return ret ;
-}
-
-int ObjectMonitor::SimpleNotify (Thread * Self, bool All) {
- guarantee (_owner == Self, "invariant") ;
- if (_WaitSet == NULL) return OS_OK ;
-
- // We have two options:
- // A. Transfer the threads from the WaitSet to the EntryList
- // B. Remove the thread from the WaitSet and unpark() it.
- //
- // We use (B), which is crude and results in lots of futile
- // context switching. In particular (B) induces lots of contention.
-
- ParkEvent * ev = NULL ; // consider using a small auto array ...
- RawMonitor_lock->lock_without_safepoint_check() ;
- for (;;) {
- ObjectWaiter * w = _WaitSet ;
- if (w == NULL) break ;
- _WaitSet = w->_next ;
- if (ev != NULL) { ev->unpark(); ev = NULL; }
- ev = w->_event ;
- OrderAccess::loadstore() ;
- w->TState = ObjectWaiter::TS_RUN ;
- OrderAccess::storeload();
- if (!All) break ;
- }
- RawMonitor_lock->unlock() ;
- if (ev != NULL) ev->unpark();
- return OS_OK ;
-}
-
-// Any JavaThread will enter here with state _thread_blocked
-int ObjectMonitor::raw_enter(TRAPS) {
- TEVENT (raw_enter) ;
- void * Contended ;
-
- // don't enter raw monitor if thread is being externally suspended, it will
- // surprise the suspender if a "suspended" thread can still enter monitor
- JavaThread * jt = (JavaThread *)THREAD;
- if (THREAD->is_Java_thread()) {
- jt->SR_lock()->lock_without_safepoint_check();
- while (jt->is_external_suspend()) {
- jt->SR_lock()->unlock();
- jt->java_suspend_self();
- jt->SR_lock()->lock_without_safepoint_check();
- }
- // guarded by SR_lock to avoid racing with new external suspend requests.
- Contended = Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) ;
- jt->SR_lock()->unlock();
- } else {
- Contended = Atomic::cmpxchg_ptr (THREAD, &_owner, NULL) ;
- }
-
- if (Contended == THREAD) {
- _recursions ++ ;
- return OM_OK ;
- }
-
- if (Contended == NULL) {
- guarantee (_owner == THREAD, "invariant") ;
- guarantee (_recursions == 0, "invariant") ;
- return OM_OK ;
- }
-
- THREAD->set_current_pending_monitor(this);
-
- if (!THREAD->is_Java_thread()) {
- // No other non-Java threads besides VM thread would acquire
- // a raw monitor.
- assert(THREAD->is_VM_thread(), "must be VM thread");
- SimpleEnter (THREAD) ;
- } else {
- guarantee (jt->thread_state() == _thread_blocked, "invariant") ;
- for (;;) {
- jt->set_suspend_equivalent();
- // cleared by handle_special_suspend_equivalent_condition() or
- // java_suspend_self()
- SimpleEnter (THREAD) ;
-
- // were we externally suspended while we were waiting?
- if (!jt->handle_special_suspend_equivalent_condition()) break ;
-
- // This thread was externally suspended
- //
- // This logic isn't needed for JVMTI raw monitors,
- // but doesn't hurt just in case the suspend rules change. This
- // logic is needed for the ObjectMonitor.wait() reentry phase.
- // We have reentered the contended monitor, but while we were
- // waiting another thread suspended us. We don't want to reenter
- // the monitor while suspended because that would surprise the
- // thread that suspended us.
- //
- // Drop the lock -
- SimpleExit (THREAD) ;
-
- jt->java_suspend_self();
- }
-
- assert(_owner == THREAD, "Fatal error with monitor owner!");
- assert(_recursions == 0, "Fatal error with monitor recursions!");
- }
-
- THREAD->set_current_pending_monitor(NULL);
- guarantee (_recursions == 0, "invariant") ;
- return OM_OK;
-}
-
-// Used mainly for JVMTI raw monitor implementation
-// Also used for ObjectMonitor::wait().
-int ObjectMonitor::raw_exit(TRAPS) {
- TEVENT (raw_exit) ;
- if (THREAD != _owner) {
- return OM_ILLEGAL_MONITOR_STATE;
- }
- if (_recursions > 0) {
- --_recursions ;
- return OM_OK ;
- }
-
- void * List = _EntryList ;
- SimpleExit (THREAD) ;
-
- return OM_OK;
-}
-
-// Used for JVMTI raw monitor implementation.
-// All JavaThreads will enter here with state _thread_blocked
-
-int ObjectMonitor::raw_wait(jlong millis, bool interruptible, TRAPS) {
- TEVENT (raw_wait) ;
- if (THREAD != _owner) {
- return OM_ILLEGAL_MONITOR_STATE;
- }
-
- // To avoid spurious wakeups we reset the parkevent -- This is strictly optional.
- // The caller must be able to tolerate spurious returns from raw_wait().
- THREAD->_ParkEvent->reset() ;
- OrderAccess::fence() ;
-
- // check interrupt event
- if (interruptible && Thread::is_interrupted(THREAD, true)) {
- return OM_INTERRUPTED;
- }
-
- intptr_t save = _recursions ;
- _recursions = 0 ;
- _waiters ++ ;
- if (THREAD->is_Java_thread()) {
- guarantee (((JavaThread *) THREAD)->thread_state() == _thread_blocked, "invariant") ;
- ((JavaThread *)THREAD)->set_suspend_equivalent();
- }
- int rv = SimpleWait (THREAD, millis) ;
- _recursions = save ;
- _waiters -- ;
-
- guarantee (THREAD == _owner, "invariant") ;
- if (THREAD->is_Java_thread()) {
- JavaThread * jSelf = (JavaThread *) THREAD ;
- for (;;) {
- if (!jSelf->handle_special_suspend_equivalent_condition()) break ;
- SimpleExit (THREAD) ;
- jSelf->java_suspend_self();
- SimpleEnter (THREAD) ;
- jSelf->set_suspend_equivalent() ;
- }
- }
- guarantee (THREAD == _owner, "invariant") ;
-
- if (interruptible && Thread::is_interrupted(THREAD, true)) {
- return OM_INTERRUPTED;
- }
- return OM_OK ;
-}
-
-int ObjectMonitor::raw_notify(TRAPS) {
- TEVENT (raw_notify) ;
- if (THREAD != _owner) {
- return OM_ILLEGAL_MONITOR_STATE;
- }
- SimpleNotify (THREAD, false) ;
- return OM_OK;
-}
-
-int ObjectMonitor::raw_notifyAll(TRAPS) {
- TEVENT (raw_notifyAll) ;
- if (THREAD != _owner) {
- return OM_ILLEGAL_MONITOR_STATE;
- }
- SimpleNotify (THREAD, true) ;
- return OM_OK;
-}
-
-#ifndef PRODUCT
-void ObjectMonitor::verify() {
-}
-
-void ObjectMonitor::print() {
-}
-#endif
-
//------------------------------------------------------------------------------
// Non-product code
--- a/hotspot/src/share/vm/runtime/synchronizer.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/synchronizer.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -22,53 +22,6 @@
*
*/
-class BasicLock VALUE_OBJ_CLASS_SPEC {
- friend class VMStructs;
- private:
- volatile markOop _displaced_header;
- public:
- markOop displaced_header() const { return _displaced_header; }
- void set_displaced_header(markOop header) { _displaced_header = header; }
-
- void print_on(outputStream* st) const;
-
- // move a basic lock (used during deoptimization
- void move_to(oop obj, BasicLock* dest);
-
- static int displaced_header_offset_in_bytes() { return offset_of(BasicLock, _displaced_header); }
-};
-
-// A BasicObjectLock associates a specific Java object with a BasicLock.
-// It is currently embedded in an interpreter frame.
-
-// Because some machines have alignment restrictions on the control stack,
-// the actual space allocated by the interpreter may include padding words
-// after the end of the BasicObjectLock. Also, in order to guarantee
-// alignment of the embedded BasicLock objects on such machines, we
-// put the embedded BasicLock at the beginning of the struct.
-
-class BasicObjectLock VALUE_OBJ_CLASS_SPEC {
- friend class VMStructs;
- private:
- BasicLock _lock; // the lock, must be double word aligned
- oop _obj; // object holds the lock;
-
- public:
- // Manipulation
- oop obj() const { return _obj; }
- void set_obj(oop obj) { _obj = obj; }
- BasicLock* lock() { return &_lock; }
-
- // Note: Use frame::interpreter_frame_monitor_size() for the size of BasicObjectLocks
- // in interpreter activation frames since it includes machine-specific padding.
- static int size() { return sizeof(BasicObjectLock)/wordSize; }
-
- // GC support
- void oops_do(OopClosure* f) { f->do_oop(&_obj); }
-
- static int obj_offset_in_bytes() { return offset_of(BasicObjectLock, _obj); }
- static int lock_offset_in_bytes() { return offset_of(BasicObjectLock, _lock); }
-};
class ObjectMonitor;
@@ -163,6 +116,8 @@
static void verify() PRODUCT_RETURN;
static int verify_objmon_isinpool(ObjectMonitor *addr) PRODUCT_RETURN0;
+ static void RegisterSpinCallback (int (*)(intptr_t, int), intptr_t) ;
+
private:
enum { _BLOCKSIZE = 128 };
static ObjectMonitor* gBlockList;
@@ -170,30 +125,6 @@
static ObjectMonitor * volatile gOmInUseList; // for moribund thread, so monitors they inflated still get scanned
static int gOmInUseCount;
- public:
- static void Initialize () ;
- static PerfCounter * _sync_ContendedLockAttempts ;
- static PerfCounter * _sync_FutileWakeups ;
- static PerfCounter * _sync_Parks ;
- static PerfCounter * _sync_EmptyNotifications ;
- static PerfCounter * _sync_Notifications ;
- static PerfCounter * _sync_SlowEnter ;
- static PerfCounter * _sync_SlowExit ;
- static PerfCounter * _sync_SlowNotify ;
- static PerfCounter * _sync_SlowNotifyAll ;
- static PerfCounter * _sync_FailedSpins ;
- static PerfCounter * _sync_SuccessfulSpins ;
- static PerfCounter * _sync_PrivateA ;
- static PerfCounter * _sync_PrivateB ;
- static PerfCounter * _sync_MonInCirculation ;
- static PerfCounter * _sync_MonScavenged ;
- static PerfCounter * _sync_Inflations ;
- static PerfCounter * _sync_Deflations ;
- static PerfLongVariable * _sync_MonExtant ;
-
- public:
- static void RegisterSpinCallback (int (*)(intptr_t, int), intptr_t) ;
-
};
// ObjectLocker enforced balanced locking and can never thrown an
--- a/hotspot/src/share/vm/runtime/thread.cpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/thread.cpp Fri Oct 22 15:59:34 2010 -0400
@@ -2995,8 +2995,8 @@
// crash Linux VM, see notes in os_linux.cpp.
main_thread->create_stack_guard_pages();
- // Initialize Java-Leve synchronization subsystem
- ObjectSynchronizer::Initialize() ;
+ // Initialize Java-Level synchronization subsystem
+ ObjectMonitor::Initialize() ;
// Initialize global modules
jint status = init_globals();
@@ -3965,215 +3965,272 @@
}
}
-
-// Lifecycle management for TSM ParkEvents.
-// ParkEvents are type-stable (TSM).
-// In our particular implementation they happen to be immortal.
+// Internal SpinLock and Mutex
+// Based on ParkEvent
+
+// Ad-hoc mutual exclusion primitives: SpinLock and Mux
//
-// We manage concurrency on the FreeList with a CAS-based
-// detach-modify-reattach idiom that avoids the ABA problems
-// that would otherwise be present in a simple CAS-based
-// push-pop implementation. (push-one and pop-all)
+// We employ SpinLocks _only for low-contention, fixed-length
+// short-duration critical sections where we're concerned
+// about native mutex_t or HotSpot Mutex:: latency.
+// The mux construct provides a spin-then-block mutual exclusion
+// mechanism.
+//
+// Testing has shown that contention on the ListLock guarding gFreeList
+// is common. If we implement ListLock as a simple SpinLock it's common
+// for the JVM to devolve to yielding with little progress. This is true
+// despite the fact that the critical sections protected by ListLock are
+// extremely short.
//
-// Caveat: Allocate() and Release() may be called from threads
-// other than the thread associated with the Event!
-// If we need to call Allocate() when running as the thread in
-// question then look for the PD calls to initialize native TLS.
-// Native TLS (Win32/Linux/Solaris) can only be initialized or
-// accessed by the associated thread.
-// See also pd_initialize().
-//
-// Note that we could defer associating a ParkEvent with a thread
-// until the 1st time the thread calls park(). unpark() calls to
-// an unprovisioned thread would be ignored. The first park() call
-// for a thread would allocate and associate a ParkEvent and return
-// immediately.
-
-volatile int ParkEvent::ListLock = 0 ;
-ParkEvent * volatile ParkEvent::FreeList = NULL ;
-
-ParkEvent * ParkEvent::Allocate (Thread * t) {
- // In rare cases -- JVM_RawMonitor* operations -- we can find t == null.
- ParkEvent * ev ;
-
- // Start by trying to recycle an existing but unassociated
- // ParkEvent from the global free list.
+// TODO-FIXME: ListLock should be of type SpinLock.
+// We should make this a 1st-class type, integrated into the lock
+// hierarchy as leaf-locks. Critically, the SpinLock structure
+// should have sufficient padding to avoid false-sharing and excessive
+// cache-coherency traffic.
+
+
+typedef volatile int SpinLockT ;
+
+void Thread::SpinAcquire (volatile int * adr, const char * LockName) {
+ if (Atomic::cmpxchg (1, adr, 0) == 0) {
+ return ; // normal fast-path return
+ }
+
+ // Slow-path : We've encountered contention -- Spin/Yield/Block strategy.
+ TEVENT (SpinAcquire - ctx) ;
+ int ctr = 0 ;
+ int Yields = 0 ;
for (;;) {
- ev = FreeList ;
- if (ev == NULL) break ;
- // 1: Detach - sequester or privatize the list
- // Tantamount to ev = Swap (&FreeList, NULL)
- if (Atomic::cmpxchg_ptr (NULL, &FreeList, ev) != ev) {
- continue ;
- }
-
- // We've detached the list. The list in-hand is now
- // local to this thread. This thread can operate on the
- // list without risk of interference from other threads.
- // 2: Extract -- pop the 1st element from the list.
- ParkEvent * List = ev->FreeNext ;
- if (List == NULL) break ;
- for (;;) {
- // 3: Try to reattach the residual list
- guarantee (List != NULL, "invariant") ;
- ParkEvent * Arv = (ParkEvent *) Atomic::cmpxchg_ptr (List, &FreeList, NULL) ;
- if (Arv == NULL) break ;
-
- // New nodes arrived. Try to detach the recent arrivals.
- if (Atomic::cmpxchg_ptr (NULL, &FreeList, Arv) != Arv) {
- continue ;
+ while (*adr != 0) {
+ ++ctr ;
+ if ((ctr & 0xFFF) == 0 || !os::is_MP()) {
+ if (Yields > 5) {
+ // Consider using a simple NakedSleep() instead.
+ // Then SpinAcquire could be called by non-JVM threads
+ Thread::current()->_ParkEvent->park(1) ;
+ } else {
+ os::NakedYield() ;
+ ++Yields ;
+ }
+ } else {
+ SpinPause() ;
}
- guarantee (Arv != NULL, "invariant") ;
- // 4: Merge Arv into List
- ParkEvent * Tail = List ;
- while (Tail->FreeNext != NULL) Tail = Tail->FreeNext ;
- Tail->FreeNext = Arv ;
- }
- break ;
- }
-
- if (ev != NULL) {
- guarantee (ev->AssociatedWith == NULL, "invariant") ;
- } else {
- // Do this the hard way -- materialize a new ParkEvent.
- // In rare cases an allocating thread might detach a long list --
- // installing null into FreeList -- and then stall or be obstructed.
- // A 2nd thread calling Allocate() would see FreeList == null.
- // The list held privately by the 1st thread is unavailable to the 2nd thread.
- // In that case the 2nd thread would have to materialize a new ParkEvent,
- // even though free ParkEvents existed in the system. In this case we end up
- // with more ParkEvents in circulation than we need, but the race is
- // rare and the outcome is benign. Ideally, the # of extant ParkEvents
- // is equal to the maximum # of threads that existed at any one time.
- // Because of the race mentioned above, segments of the freelist
- // can be transiently inaccessible. At worst we may end up with the
- // # of ParkEvents in circulation slightly above the ideal.
- // Note that if we didn't have the TSM/immortal constraint, then
- // when reattaching, above, we could trim the list.
- ev = new ParkEvent () ;
- guarantee ((intptr_t(ev) & 0xFF) == 0, "invariant") ;
- }
- ev->reset() ; // courtesy to caller
- ev->AssociatedWith = t ; // Associate ev with t
- ev->FreeNext = NULL ;
- return ev ;
-}
-
-void ParkEvent::Release (ParkEvent * ev) {
- if (ev == NULL) return ;
- guarantee (ev->FreeNext == NULL , "invariant") ;
- ev->AssociatedWith = NULL ;
- for (;;) {
- // Push ev onto FreeList
- // The mechanism is "half" lock-free.
- ParkEvent * List = FreeList ;
- ev->FreeNext = List ;
- if (Atomic::cmpxchg_ptr (ev, &FreeList, List) == List) break ;
+ }
+ if (Atomic::cmpxchg (1, adr, 0) == 0) return ;
}
}
-// Override operator new and delete so we can ensure that the
-// least significant byte of ParkEvent addresses is 0.
-// Beware that excessive address alignment is undesirable
-// as it can result in D$ index usage imbalance as
-// well as bank access imbalance on Niagara-like platforms,
-// although Niagara's hash function should help.
-
-void * ParkEvent::operator new (size_t sz) {
- return (void *) ((intptr_t (CHeapObj::operator new (sz + 256)) + 256) & -256) ;
-}
-
-void ParkEvent::operator delete (void * a) {
- // ParkEvents are type-stable and immortal ...
- ShouldNotReachHere();
+void Thread::SpinRelease (volatile int * adr) {
+ assert (*adr != 0, "invariant") ;
+ OrderAccess::fence() ; // guarantee at least release consistency.
+ // Roach-motel semantics.
+ // It's safe if subsequent LDs and STs float "up" into the critical section,
+ // but prior LDs and STs within the critical section can't be allowed
+ // to reorder or float past the ST that releases the lock.
+ *adr = 0 ;
}
-
-// 6399321 As a temporary measure we copied & modified the ParkEvent::
-// allocate() and release() code for use by Parkers. The Parker:: forms
-// will eventually be removed as we consolide and shift over to ParkEvents
-// for both builtin synchronization and JSR166 operations.
-
-volatile int Parker::ListLock = 0 ;
-Parker * volatile Parker::FreeList = NULL ;
-
-Parker * Parker::Allocate (JavaThread * t) {
- guarantee (t != NULL, "invariant") ;
- Parker * p ;
-
- // Start by trying to recycle an existing but unassociated
- // Parker from the global free list.
+// muxAcquire and muxRelease:
+//
+// * muxAcquire and muxRelease support a single-word lock-word construct.
+// The LSB of the word is set IFF the lock is held.
+// The remainder of the word points to the head of a singly-linked list
+// of threads blocked on the lock.
+//
+// * The current implementation of muxAcquire-muxRelease uses its own
+// dedicated Thread._MuxEvent instance. If we're interested in
+// minimizing the peak number of extant ParkEvent instances then
+// we could eliminate _MuxEvent and "borrow" _ParkEvent as long
+// as certain invariants were satisfied. Specifically, care would need
+// to be taken with regards to consuming unpark() "permits".
+// A safe rule of thumb is that a thread would never call muxAcquire()
+// if it's enqueued (cxq, EntryList, WaitList, etc) and will subsequently
+// park(). Otherwise the _ParkEvent park() operation in muxAcquire() could
+// consume an unpark() permit intended for monitorenter, for instance.
+// One way around this would be to widen the restricted-range semaphore
+// implemented in park(). Another alternative would be to provide
+// multiple instances of the PlatformEvent() for each thread. One
+// instance would be dedicated to muxAcquire-muxRelease, for instance.
+//
+// * Usage:
+// -- Only as leaf locks
+// -- for short-term locking only as muxAcquire does not perform
+// thread state transitions.
+//
+// Alternatives:
+// * We could implement muxAcquire and muxRelease with MCS or CLH locks
+// but with parking or spin-then-park instead of pure spinning.
+// * Use Taura-Oyama-Yonenzawa locks.
+// * It's possible to construct a 1-0 lock if we encode the lockword as
+// (List,LockByte). Acquire will CAS the full lockword while Release
+// will STB 0 into the LockByte. The 1-0 scheme admits stranding, so
+// acquiring threads use timers (ParkTimed) to detect and recover from
+// the stranding window. Thread/Node structures must be aligned on 256-byte
+// boundaries by using placement-new.
+// * Augment MCS with advisory back-link fields maintained with CAS().
+// Pictorially: LockWord -> T1 <-> T2 <-> T3 <-> ... <-> Tn <-> Owner.
+// The validity of the backlinks must be ratified before we trust the value.
+// If the backlinks are invalid the exiting thread must back-track through the
+// the forward links, which are always trustworthy.
+// * Add a successor indication. The LockWord is currently encoded as
+// (List, LOCKBIT:1). We could also add a SUCCBIT or an explicit _succ variable
+// to provide the usual futile-wakeup optimization.
+// See RTStt for details.
+// * Consider schedctl.sc_nopreempt to cover the critical section.
+//
+
+
+typedef volatile intptr_t MutexT ; // Mux Lock-word
+enum MuxBits { LOCKBIT = 1 } ;
+
+void Thread::muxAcquire (volatile intptr_t * Lock, const char * LockName) {
+ intptr_t w = Atomic::cmpxchg_ptr (LOCKBIT, Lock, 0) ;
+ if (w == 0) return ;
+ if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ return ;
+ }
+
+ TEVENT (muxAcquire - Contention) ;
+ ParkEvent * const Self = Thread::current()->_MuxEvent ;
+ assert ((intptr_t(Self) & LOCKBIT) == 0, "invariant") ;
for (;;) {
- p = FreeList ;
- if (p == NULL) break ;
- // 1: Detach
- // Tantamount to p = Swap (&FreeList, NULL)
- if (Atomic::cmpxchg_ptr (NULL, &FreeList, p) != p) {
- continue ;
- }
-
- // We've detached the list. The list in-hand is now
- // local to this thread. This thread can operate on the
- // list without risk of interference from other threads.
- // 2: Extract -- pop the 1st element from the list.
- Parker * List = p->FreeNext ;
- if (List == NULL) break ;
- for (;;) {
- // 3: Try to reattach the residual list
- guarantee (List != NULL, "invariant") ;
- Parker * Arv = (Parker *) Atomic::cmpxchg_ptr (List, &FreeList, NULL) ;
- if (Arv == NULL) break ;
-
- // New nodes arrived. Try to detach the recent arrivals.
- if (Atomic::cmpxchg_ptr (NULL, &FreeList, Arv) != Arv) {
- continue ;
+ int its = (os::is_MP() ? 100 : 0) + 1 ;
+
+ // Optional spin phase: spin-then-park strategy
+ while (--its >= 0) {
+ w = *Lock ;
+ if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ return ;
+ }
+ }
+
+ Self->reset() ;
+ Self->OnList = intptr_t(Lock) ;
+ // The following fence() isn't _strictly necessary as the subsequent
+ // CAS() both serializes execution and ratifies the fetched *Lock value.
+ OrderAccess::fence();
+ for (;;) {
+ w = *Lock ;
+ if ((w & LOCKBIT) == 0) {
+ if (Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ Self->OnList = 0 ; // hygiene - allows stronger asserts
+ return ;
+ }
+ continue ; // Interference -- *Lock changed -- Just retry
}
- guarantee (Arv != NULL, "invariant") ;
- // 4: Merge Arv into List
- Parker * Tail = List ;
- while (Tail->FreeNext != NULL) Tail = Tail->FreeNext ;
- Tail->FreeNext = Arv ;
- }
- break ;
- }
-
- if (p != NULL) {
- guarantee (p->AssociatedWith == NULL, "invariant") ;
- } else {
- // Do this the hard way -- materialize a new Parker..
- // In rare cases an allocating thread might detach
- // a long list -- installing null into FreeList --and
- // then stall. Another thread calling Allocate() would see
- // FreeList == null and then invoke the ctor. In this case we
- // end up with more Parkers in circulation than we need, but
- // the race is rare and the outcome is benign.
- // Ideally, the # of extant Parkers is equal to the
- // maximum # of threads that existed at any one time.
- // Because of the race mentioned above, segments of the
- // freelist can be transiently inaccessible. At worst
- // we may end up with the # of Parkers in circulation
- // slightly above the ideal.
- p = new Parker() ;
- }
- p->AssociatedWith = t ; // Associate p with t
- p->FreeNext = NULL ;
- return p ;
-}
-
-
-void Parker::Release (Parker * p) {
- if (p == NULL) return ;
- guarantee (p->AssociatedWith != NULL, "invariant") ;
- guarantee (p->FreeNext == NULL , "invariant") ;
- p->AssociatedWith = NULL ;
- for (;;) {
- // Push p onto FreeList
- Parker * List = FreeList ;
- p->FreeNext = List ;
- if (Atomic::cmpxchg_ptr (p, &FreeList, List) == List) break ;
+ assert (w & LOCKBIT, "invariant") ;
+ Self->ListNext = (ParkEvent *) (w & ~LOCKBIT );
+ if (Atomic::cmpxchg_ptr (intptr_t(Self)|LOCKBIT, Lock, w) == w) break ;
+ }
+
+ while (Self->OnList != 0) {
+ Self->park() ;
+ }
}
}
+void Thread::muxAcquireW (volatile intptr_t * Lock, ParkEvent * ev) {
+ intptr_t w = Atomic::cmpxchg_ptr (LOCKBIT, Lock, 0) ;
+ if (w == 0) return ;
+ if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ return ;
+ }
+
+ TEVENT (muxAcquire - Contention) ;
+ ParkEvent * ReleaseAfter = NULL ;
+ if (ev == NULL) {
+ ev = ReleaseAfter = ParkEvent::Allocate (NULL) ;
+ }
+ assert ((intptr_t(ev) & LOCKBIT) == 0, "invariant") ;
+ for (;;) {
+ guarantee (ev->OnList == 0, "invariant") ;
+ int its = (os::is_MP() ? 100 : 0) + 1 ;
+
+ // Optional spin phase: spin-then-park strategy
+ while (--its >= 0) {
+ w = *Lock ;
+ if ((w & LOCKBIT) == 0 && Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ if (ReleaseAfter != NULL) {
+ ParkEvent::Release (ReleaseAfter) ;
+ }
+ return ;
+ }
+ }
+
+ ev->reset() ;
+ ev->OnList = intptr_t(Lock) ;
+ // The following fence() isn't _strictly necessary as the subsequent
+ // CAS() both serializes execution and ratifies the fetched *Lock value.
+ OrderAccess::fence();
+ for (;;) {
+ w = *Lock ;
+ if ((w & LOCKBIT) == 0) {
+ if (Atomic::cmpxchg_ptr (w|LOCKBIT, Lock, w) == w) {
+ ev->OnList = 0 ;
+ // We call ::Release while holding the outer lock, thus
+ // artificially lengthening the critical section.
+ // Consider deferring the ::Release() until the subsequent unlock(),
+ // after we've dropped the outer lock.
+ if (ReleaseAfter != NULL) {
+ ParkEvent::Release (ReleaseAfter) ;
+ }
+ return ;
+ }
+ continue ; // Interference -- *Lock changed -- Just retry
+ }
+ assert (w & LOCKBIT, "invariant") ;
+ ev->ListNext = (ParkEvent *) (w & ~LOCKBIT );
+ if (Atomic::cmpxchg_ptr (intptr_t(ev)|LOCKBIT, Lock, w) == w) break ;
+ }
+
+ while (ev->OnList != 0) {
+ ev->park() ;
+ }
+ }
+}
+
+// Release() must extract a successor from the list and then wake that thread.
+// It can "pop" the front of the list or use a detach-modify-reattach (DMR) scheme
+// similar to that used by ParkEvent::Allocate() and ::Release(). DMR-based
+// Release() would :
+// (A) CAS() or swap() null to *Lock, releasing the lock and detaching the list.
+// (B) Extract a successor from the private list "in-hand"
+// (C) attempt to CAS() the residual back into *Lock over null.
+// If there were any newly arrived threads and the CAS() would fail.
+// In that case Release() would detach the RATs, re-merge the list in-hand
+// with the RATs and repeat as needed. Alternately, Release() might
+// detach and extract a successor, but then pass the residual list to the wakee.
+// The wakee would be responsible for reattaching and remerging before it
+// competed for the lock.
+//
+// Both "pop" and DMR are immune from ABA corruption -- there can be
+// multiple concurrent pushers, but only one popper or detacher.
+// This implementation pops from the head of the list. This is unfair,
+// but tends to provide excellent throughput as hot threads remain hot.
+// (We wake recently run threads first).
+
+void Thread::muxRelease (volatile intptr_t * Lock) {
+ for (;;) {
+ const intptr_t w = Atomic::cmpxchg_ptr (0, Lock, LOCKBIT) ;
+ assert (w & LOCKBIT, "invariant") ;
+ if (w == LOCKBIT) return ;
+ ParkEvent * List = (ParkEvent *) (w & ~LOCKBIT) ;
+ assert (List != NULL, "invariant") ;
+ assert (List->OnList == intptr_t(Lock), "invariant") ;
+ ParkEvent * nxt = List->ListNext ;
+
+ // The following CAS() releases the lock and pops the head element.
+ if (Atomic::cmpxchg_ptr (intptr_t(nxt), Lock, w) != w) {
+ continue ;
+ }
+ List->OnList = 0 ;
+ OrderAccess::fence() ;
+ List->unpark () ;
+ return ;
+ }
+}
+
+
void Threads::verify() {
ALL_JAVA_THREADS(p) {
p->verify();
--- a/hotspot/src/share/vm/runtime/thread.hpp Mon Oct 18 09:33:24 2010 -0700
+++ b/hotspot/src/share/vm/runtime/thread.hpp Fri Oct 22 15:59:34 2010 -0400
@@ -30,6 +30,7 @@
class ThreadStatistics;
class ConcurrentLocksDump;
class ParkEvent ;
+class Parker;
class ciEnv;
class CompileThread;
@@ -544,7 +545,6 @@
static void muxAcquire (volatile intptr_t * Lock, const char * Name) ;
static void muxAcquireW (volatile intptr_t * Lock, ParkEvent * ev) ;
static void muxRelease (volatile intptr_t * Lock) ;
-
};
// Inline implementation of Thread::current()
@@ -1769,100 +1769,3 @@
}
};
-// ParkEvents are type-stable and immortal.
-//
-// Lifecycle: Once a ParkEvent is associated with a thread that ParkEvent remains
-// associated with the thread for the thread's entire lifetime - the relationship is
-// stable. A thread will be associated at most one ParkEvent. When the thread
-// expires, the ParkEvent moves to the EventFreeList. New threads attempt to allocate from
-// the EventFreeList before creating a new Event. Type-stability frees us from
-// worrying about stale Event or Thread references in the objectMonitor subsystem.
-// (A reference to ParkEvent is always valid, even though the event may no longer be associated
-// with the desired or expected thread. A key aspect of this design is that the callers of
-// park, unpark, etc must tolerate stale references and spurious wakeups).
-//
-// Only the "associated" thread can block (park) on the ParkEvent, although
-// any other thread can unpark a reachable parkevent. Park() is allowed to
-// return spuriously. In fact park-unpark a really just an optimization to
-// avoid unbounded spinning and surrender the CPU to be a polite system citizen.
-// A degenerate albeit "impolite" park-unpark implementation could simply return.
-// See http://blogs.sun.com/dave for more details.
-//
-// Eventually I'd like to eliminate Events and ObjectWaiters, both of which serve as
-// thread proxies, and simply make the THREAD structure type-stable and persistent.
-// Currently, we unpark events associated with threads, but ideally we'd just
-// unpark threads.
-//
-// The base-class, PlatformEvent, is platform-specific while the ParkEvent is
-// platform-independent. PlatformEvent provides park(), unpark(), etc., and
-// is abstract -- that is, a PlatformEvent should never be instantiated except
-// as part of a ParkEvent.
-// Equivalently we could have defined a platform-independent base-class that
-// exported Allocate(), Release(), etc. The platform-specific class would extend
-// that base-class, adding park(), unpark(), etc.
-//
-// A word of caution: The JVM uses 2 very similar constructs:
-// 1. ParkEvent are used for Java-level "monitor" synchronization.
-// 2. Parkers are used by JSR166-JUC park-unpark.
-//
-// We'll want to eventually merge these redundant facilities and use ParkEvent.
-
-
-class ParkEvent : public os::PlatformEvent {
- private:
- ParkEvent * FreeNext ;
-
- // Current association
- Thread * AssociatedWith ;
- intptr_t RawThreadIdentity ; // LWPID etc
- volatile int Incarnation ;
-
- // diagnostic : keep track of last thread to wake this thread.
- // this is useful for construction of dependency graphs.
- void * LastWaker ;
-
- public:
- // MCS-CLH list linkage and Native Mutex/Monitor
- ParkEvent * volatile ListNext ;
- ParkEvent * volatile ListPrev ;
- volatile intptr_t OnList ;
- volatile int TState ;
- volatile int Notified ; // for native monitor construct
- volatile int IsWaiting ; // Enqueued on WaitSet
-
-
- private:
- static ParkEvent * volatile FreeList ;
- static volatile int ListLock ;
-
- // It's prudent to mark the dtor as "private"
- // ensuring that it's not visible outside the package.
- // Unfortunately gcc warns about such usage, so
- // we revert to the less desirable "protected" visibility.
- // The other compilers accept private dtors.
-
- protected: // Ensure dtor is never invoked
- ~ParkEvent() { guarantee (0, "invariant") ; }
-
- ParkEvent() : PlatformEvent() {
- AssociatedWith = NULL ;
- FreeNext = NULL ;
- ListNext = NULL ;
- ListPrev = NULL ;
- OnList = 0 ;
- TState = 0 ;
- Notified = 0 ;
- IsWaiting = 0 ;
- }
-
- // We use placement-new to force ParkEvent instances to be
- // aligned on 256-byte address boundaries. This ensures that the least
- // significant byte of a ParkEvent address is always 0.
-
- void * operator new (size_t sz) ;
- void operator delete (void * a) ;
-
- public:
- static ParkEvent * Allocate (Thread * t) ;
- static void Release (ParkEvent * e) ;
-} ;