/*
* Copyright 1998-2006 Sun Microsystems, Inc. All Rights Reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
* CA 95054 USA or visit www.sun.com if you need additional information or
* have any questions.
*
*/
#include "incls/_precompiled.incl"
#include "incls/_ifg.cpp.incl"
#define EXACT_PRESSURE 1
//=============================================================================
//------------------------------IFG--------------------------------------------
PhaseIFG::PhaseIFG( Arena *arena ) : Phase(Interference_Graph), _arena(arena) {
}
//------------------------------init-------------------------------------------
void PhaseIFG::init( uint maxlrg ) {
_maxlrg = maxlrg;
_yanked = new (_arena) VectorSet(_arena);
_is_square = false;
// Make uninitialized adjacency lists
_adjs = (IndexSet*)_arena->Amalloc(sizeof(IndexSet)*maxlrg);
// Also make empty live range structures
_lrgs = (LRG *)_arena->Amalloc( maxlrg * sizeof(LRG) );
memset(_lrgs,0,sizeof(LRG)*maxlrg);
// Init all to empty
for( uint i = 0; i < maxlrg; i++ ) {
_adjs[i].initialize(maxlrg);
_lrgs[i].Set_All();
}
}
//------------------------------add--------------------------------------------
// Add edge between vertices a & b. These are sorted (triangular matrix),
// then the smaller number is inserted in the larger numbered array.
int PhaseIFG::add_edge( uint a, uint b ) {
lrgs(a).invalid_degree();
lrgs(b).invalid_degree();
// Sort a and b, so that a is bigger
assert( !_is_square, "only on triangular" );
if( a < b ) { uint tmp = a; a = b; b = tmp; }
return _adjs[a].insert( b );
}
//------------------------------add_vector-------------------------------------
// Add an edge between 'a' and everything in the vector.
void PhaseIFG::add_vector( uint a, IndexSet *vec ) {
// IFG is triangular, so do the inserts where 'a' < 'b'.
assert( !_is_square, "only on triangular" );
IndexSet *adjs_a = &_adjs[a];
if( !vec->count() ) return;
IndexSetIterator elements(vec);
uint neighbor;
while ((neighbor = elements.next()) != 0) {
add_edge( a, neighbor );
}
}
//------------------------------test-------------------------------------------
// Is there an edge between a and b?
int PhaseIFG::test_edge( uint a, uint b ) const {
// Sort a and b, so that a is larger
assert( !_is_square, "only on triangular" );
if( a < b ) { uint tmp = a; a = b; b = tmp; }
return _adjs[a].member(b);
}
//------------------------------SquareUp---------------------------------------
// Convert triangular matrix to square matrix
void PhaseIFG::SquareUp() {
assert( !_is_square, "only on triangular" );
// Simple transpose
for( uint i = 0; i < _maxlrg; i++ ) {
IndexSetIterator elements(&_adjs[i]);
uint datum;
while ((datum = elements.next()) != 0) {
_adjs[datum].insert( i );
}
}
_is_square = true;
}
//------------------------------Compute_Effective_Degree-----------------------
// Compute effective degree in bulk
void PhaseIFG::Compute_Effective_Degree() {
assert( _is_square, "only on square" );
for( uint i = 0; i < _maxlrg; i++ )
lrgs(i).set_degree(effective_degree(i));
}
//------------------------------test_edge_sq-----------------------------------
int PhaseIFG::test_edge_sq( uint a, uint b ) const {
assert( _is_square, "only on square" );
// Swap, so that 'a' has the lesser count. Then binary search is on
// the smaller of a's list and b's list.
if( neighbor_cnt(a) > neighbor_cnt(b) ) { uint tmp = a; a = b; b = tmp; }
//return _adjs[a].unordered_member(b);
return _adjs[a].member(b);
}
//------------------------------Union------------------------------------------
// Union edges of B into A
void PhaseIFG::Union( uint a, uint b ) {
assert( _is_square, "only on square" );
IndexSet *A = &_adjs[a];
IndexSetIterator b_elements(&_adjs[b]);
uint datum;
while ((datum = b_elements.next()) != 0) {
if(A->insert(datum)) {
_adjs[datum].insert(a);
lrgs(a).invalid_degree();
lrgs(datum).invalid_degree();
}
}
}
//------------------------------remove_node------------------------------------
// Yank a Node and all connected edges from the IFG. Return a
// list of neighbors (edges) yanked.
IndexSet *PhaseIFG::remove_node( uint a ) {
assert( _is_square, "only on square" );
assert( !_yanked->test(a), "" );
_yanked->set(a);
// I remove the LRG from all neighbors.
IndexSetIterator elements(&_adjs[a]);
LRG &lrg_a = lrgs(a);
uint datum;
while ((datum = elements.next()) != 0) {
_adjs[datum].remove(a);
lrgs(datum).inc_degree( -lrg_a.compute_degree(lrgs(datum)) );
}
return neighbors(a);
}
//------------------------------re_insert--------------------------------------
// Re-insert a yanked Node.
void PhaseIFG::re_insert( uint a ) {
assert( _is_square, "only on square" );
assert( _yanked->test(a), "" );
(*_yanked) >>= a;
IndexSetIterator elements(&_adjs[a]);
uint datum;
while ((datum = elements.next()) != 0) {
_adjs[datum].insert(a);
lrgs(datum).invalid_degree();
}
}
//------------------------------compute_degree---------------------------------
// Compute the degree between 2 live ranges. If both live ranges are
// aligned-adjacent powers-of-2 then we use the MAX size. If either is
// mis-aligned (or for Fat-Projections, not-adjacent) then we have to
// MULTIPLY the sizes. Inspect Brigg's thesis on register pairs to see why
// this is so.
int LRG::compute_degree( LRG &l ) const {
int tmp;
int num_regs = _num_regs;
int nregs = l.num_regs();
tmp = (_fat_proj || l._fat_proj) // either is a fat-proj?
? (num_regs * nregs) // then use product
: MAX2(num_regs,nregs); // else use max
return tmp;
}
//------------------------------effective_degree-------------------------------
// Compute effective degree for this live range. If both live ranges are
// aligned-adjacent powers-of-2 then we use the MAX size. If either is
// mis-aligned (or for Fat-Projections, not-adjacent) then we have to
// MULTIPLY the sizes. Inspect Brigg's thesis on register pairs to see why
// this is so.
int PhaseIFG::effective_degree( uint lidx ) const {
int eff = 0;
int num_regs = lrgs(lidx).num_regs();
int fat_proj = lrgs(lidx)._fat_proj;
IndexSet *s = neighbors(lidx);
IndexSetIterator elements(s);
uint nidx;
while((nidx = elements.next()) != 0) {
LRG &lrgn = lrgs(nidx);
int nregs = lrgn.num_regs();
eff += (fat_proj || lrgn._fat_proj) // either is a fat-proj?
? (num_regs * nregs) // then use product
: MAX2(num_regs,nregs); // else use max
}
return eff;
}
#ifndef PRODUCT
//------------------------------dump-------------------------------------------
void PhaseIFG::dump() const {
tty->print_cr("-- Interference Graph --%s--",
_is_square ? "square" : "triangular" );
if( _is_square ) {
for( uint i = 0; i < _maxlrg; i++ ) {
tty->print( (*_yanked)[i] ? "XX " : " ");
tty->print("L%d: { ",i);
IndexSetIterator elements(&_adjs[i]);
uint datum;
while ((datum = elements.next()) != 0) {
tty->print("L%d ", datum);
}
tty->print_cr("}");
}
return;
}
// Triangular
for( uint i = 0; i < _maxlrg; i++ ) {
uint j;
tty->print( (*_yanked)[i] ? "XX " : " ");
tty->print("L%d: { ",i);
for( j = _maxlrg; j > i; j-- )
if( test_edge(j - 1,i) ) {
tty->print("L%d ",j - 1);
}
tty->print("| ");
IndexSetIterator elements(&_adjs[i]);
uint datum;
while ((datum = elements.next()) != 0) {
tty->print("L%d ", datum);
}
tty->print("}\n");
}
tty->print("\n");
}
//------------------------------stats------------------------------------------
void PhaseIFG::stats() const {
ResourceMark rm;
int *h_cnt = NEW_RESOURCE_ARRAY(int,_maxlrg*2);
memset( h_cnt, 0, sizeof(int)*_maxlrg*2 );
uint i;
for( i = 0; i < _maxlrg; i++ ) {
h_cnt[neighbor_cnt(i)]++;
}
tty->print_cr("--Histogram of counts--");
for( i = 0; i < _maxlrg*2; i++ )
if( h_cnt[i] )
tty->print("%d/%d ",i,h_cnt[i]);
tty->print_cr("");
}
//------------------------------verify-----------------------------------------
void PhaseIFG::verify( const PhaseChaitin *pc ) const {
// IFG is square, sorted and no need for Find
for( uint i = 0; i < _maxlrg; i++ ) {
assert(!((*_yanked)[i]) || !neighbor_cnt(i), "Is removed completely" );
IndexSet *set = &_adjs[i];
IndexSetIterator elements(set);
uint idx;
uint last = 0;
while ((idx = elements.next()) != 0) {
assert( idx != i, "Must have empty diagonal");
assert( pc->Find_const(idx) == idx, "Must not need Find" );
assert( _adjs[idx].member(i), "IFG not square" );
assert( !(*_yanked)[idx], "No yanked neighbors" );
assert( last < idx, "not sorted increasing");
last = idx;
}
assert( !lrgs(i)._degree_valid ||
effective_degree(i) == lrgs(i).degree(), "degree is valid but wrong" );
}
}
#endif
//------------------------------interfere_with_live----------------------------
// Interfere this register with everything currently live. Use the RegMasks
// to trim the set of possible interferences. Return a count of register-only
// inteferences as an estimate of register pressure.
void PhaseChaitin::interfere_with_live( uint r, IndexSet *liveout ) {
uint retval = 0;
// Interfere with everything live.
const RegMask &rm = lrgs(r).mask();
// Check for interference by checking overlap of regmasks.
// Only interfere if acceptable register masks overlap.
IndexSetIterator elements(liveout);
uint l;
while( (l = elements.next()) != 0 )
if( rm.overlap( lrgs(l).mask() ) )
_ifg->add_edge( r, l );
}
//------------------------------build_ifg_virtual------------------------------
// Actually build the interference graph. Uses virtual registers only, no
// physical register masks. This allows me to be very aggressive when
// coalescing copies. Some of this aggressiveness will have to be undone
// later, but I'd rather get all the copies I can now (since unremoved copies
// at this point can end up in bad places). Copies I re-insert later I have
// more opportunity to insert them in low-frequency locations.
void PhaseChaitin::build_ifg_virtual( ) {
// For all blocks (in any order) do...
for( uint i=0; i<_cfg._num_blocks; i++ ) {
Block *b = _cfg._blocks[i];
IndexSet *liveout = _live->live(b);
// The IFG is built by a single reverse pass over each basic block.
// Starting with the known live-out set, we remove things that get
// defined and add things that become live (essentially executing one
// pass of a standard LIVE analysis). Just before a Node defines a value
// (and removes it from the live-ness set) that value is certainly live.
// The defined value interferes with everything currently live. The
// value is then removed from the live-ness set and it's inputs are
// added to the live-ness set.
for( uint j = b->end_idx() + 1; j > 1; j-- ) {
Node *n = b->_nodes[j-1];
// Get value being defined
uint r = n2lidx(n);
// Some special values do not allocate
if( r ) {
// Remove from live-out set
liveout->remove(r);
// Copies do not define a new value and so do not interfere.
// Remove the copies source from the liveout set before interfering.
uint idx = n->is_Copy();
if( idx ) liveout->remove( n2lidx(n->in(idx)) );
// Interfere with everything live
interfere_with_live( r, liveout );
}
// Make all inputs live
if( !n->is_Phi() ) { // Phi function uses come from prior block
for( uint k = 1; k < n->req(); k++ )
liveout->insert( n2lidx(n->in(k)) );
}
// 2-address instructions always have the defined value live
// on entry to the instruction, even though it is being defined
// by the instruction. We pretend a virtual copy sits just prior
// to the instruction and kills the src-def'd register.
// In other words, for 2-address instructions the defined value
// interferes with all inputs.
uint idx;
if( n->is_Mach() && (idx = n->as_Mach()->two_adr()) ) {
const MachNode *mach = n->as_Mach();
// Sometimes my 2-address ADDs are commuted in a bad way.
// We generally want the USE-DEF register to refer to the
// loop-varying quantity, to avoid a copy.
uint op = mach->ideal_Opcode();
// Check that mach->num_opnds() == 3 to ensure instruction is
// not subsuming constants, effectively excludes addI_cin_imm
// Can NOT swap for instructions like addI_cin_imm since it
// is adding zero to yhi + carry and the second ideal-input
// points to the result of adding low-halves.
// Checking req() and num_opnds() does NOT distinguish addI_cout from addI_cout_imm
if( (op == Op_AddI && mach->req() == 3 && mach->num_opnds() == 3) &&
n->in(1)->bottom_type()->base() == Type::Int &&
// See if the ADD is involved in a tight data loop the wrong way
n->in(2)->is_Phi() &&
n->in(2)->in(2) == n ) {
Node *tmp = n->in(1);
n->set_req( 1, n->in(2) );
n->set_req( 2, tmp );
}
// Defined value interferes with all inputs
uint lidx = n2lidx(n->in(idx));
for( uint k = 1; k < n->req(); k++ ) {
uint kidx = n2lidx(n->in(k));
if( kidx != lidx )
_ifg->add_edge( r, kidx );
}
}
} // End of forall instructions in block
} // End of forall blocks
}
//------------------------------count_int_pressure-----------------------------
uint PhaseChaitin::count_int_pressure( IndexSet *liveout ) {
IndexSetIterator elements(liveout);
uint lidx;
uint cnt = 0;
while ((lidx = elements.next()) != 0) {
if( lrgs(lidx).mask().is_UP() &&
lrgs(lidx).mask_size() &&
!lrgs(lidx)._is_float &&
lrgs(lidx).mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) )
cnt += lrgs(lidx).reg_pressure();
}
return cnt;
}
//------------------------------count_float_pressure---------------------------
uint PhaseChaitin::count_float_pressure( IndexSet *liveout ) {
IndexSetIterator elements(liveout);
uint lidx;
uint cnt = 0;
while ((lidx = elements.next()) != 0) {
if( lrgs(lidx).mask().is_UP() &&
lrgs(lidx).mask_size() &&
lrgs(lidx)._is_float )
cnt += lrgs(lidx).reg_pressure();
}
return cnt;
}
//------------------------------lower_pressure---------------------------------
// Adjust register pressure down by 1. Capture last hi-to-low transition,
static void lower_pressure( LRG *lrg, uint where, Block *b, uint *pressure, uint *hrp_index ) {
if( lrg->mask().is_UP() && lrg->mask_size() ) {
if( lrg->_is_float ) {
pressure[1] -= lrg->reg_pressure();
if( pressure[1] == (uint)FLOATPRESSURE ) {
hrp_index[1] = where;
#ifdef EXACT_PRESSURE
if( pressure[1] > b->_freg_pressure )
b->_freg_pressure = pressure[1]+1;
#else
b->_freg_pressure = (uint)FLOATPRESSURE+1;
#endif
}
} else if( lrg->mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) ) {
pressure[0] -= lrg->reg_pressure();
if( pressure[0] == (uint)INTPRESSURE ) {
hrp_index[0] = where;
#ifdef EXACT_PRESSURE
if( pressure[0] > b->_reg_pressure )
b->_reg_pressure = pressure[0]+1;
#else
b->_reg_pressure = (uint)INTPRESSURE+1;
#endif
}
}
}
}
//------------------------------build_ifg_physical-----------------------------
// Build the interference graph using physical registers when available.
// That is, if 2 live ranges are simultaneously alive but in their acceptable
// register sets do not overlap, then they do not interfere.
uint PhaseChaitin::build_ifg_physical( ResourceArea *a ) {
NOT_PRODUCT( Compile::TracePhase t3("buildIFG", &_t_buildIFGphysical, TimeCompiler); )
uint spill_reg = LRG::SPILL_REG;
uint must_spill = 0;
// For all blocks (in any order) do...
for( uint i = 0; i < _cfg._num_blocks; i++ ) {
Block *b = _cfg._blocks[i];
// Clone (rather than smash in place) the liveout info, so it is alive
// for the "collect_gc_info" phase later.
IndexSet liveout(_live->live(b));
uint last_inst = b->end_idx();
// Compute last phi index
uint last_phi;
for( last_phi = 1; last_phi < last_inst; last_phi++ )
if( !b->_nodes[last_phi]->is_Phi() )
break;
// Reset block's register pressure values for each ifg construction
uint pressure[2], hrp_index[2];
pressure[0] = pressure[1] = 0;
hrp_index[0] = hrp_index[1] = last_inst+1;
b->_reg_pressure = b->_freg_pressure = 0;
// Liveout things are presumed live for the whole block. We accumulate
// 'area' accordingly. If they get killed in the block, we'll subtract
// the unused part of the block from the area.
double cost = b->_freq * double(last_inst-last_phi);
assert( cost >= 0, "negative spill cost" );
IndexSetIterator elements(&liveout);
uint lidx;
while ((lidx = elements.next()) != 0) {
LRG &lrg = lrgs(lidx);
lrg._area += cost;
// Compute initial register pressure
if( lrg.mask().is_UP() && lrg.mask_size() ) {
if( lrg._is_float ) { // Count float pressure
pressure[1] += lrg.reg_pressure();
#ifdef EXACT_PRESSURE
if( pressure[1] > b->_freg_pressure )
b->_freg_pressure = pressure[1];
#endif
// Count int pressure, but do not count the SP, flags
} else if( lrgs(lidx).mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) ) {
pressure[0] += lrg.reg_pressure();
#ifdef EXACT_PRESSURE
if( pressure[0] > b->_reg_pressure )
b->_reg_pressure = pressure[0];
#endif
}
}
}
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
// The IFG is built by a single reverse pass over each basic block.
// Starting with the known live-out set, we remove things that get
// defined and add things that become live (essentially executing one
// pass of a standard LIVE analysis). Just before a Node defines a value
// (and removes it from the live-ness set) that value is certainly live.
// The defined value interferes with everything currently live. The
// value is then removed from the live-ness set and it's inputs are added
// to the live-ness set.
uint j;
for( j = last_inst + 1; j > 1; j-- ) {
Node *n = b->_nodes[j - 1];
// Get value being defined
uint r = n2lidx(n);
// Some special values do not allocate
if( r ) {
// A DEF normally costs block frequency; rematerialized values are
// removed from the DEF sight, so LOWER costs here.
lrgs(r)._cost += n->rematerialize() ? 0 : b->_freq;
// If it is not live, then this instruction is dead. Probably caused
// by spilling and rematerialization. Who cares why, yank this baby.
if( !liveout.member(r) && n->Opcode() != Op_SafePoint ) {
Node *def = n->in(0);
if( !n->is_Proj() ||
// Could also be a flags-projection of a dead ADD or such.
(n2lidx(def) && !liveout.member(n2lidx(def)) ) ) {
b->_nodes.remove(j - 1);
if( lrgs(r)._def == n ) lrgs(r)._def = 0;
n->disconnect_inputs(NULL);
_cfg._bbs.map(n->_idx,NULL);
n->replace_by(C->top());
// Since yanking a Node from block, high pressure moves up one
hrp_index[0]--;
hrp_index[1]--;
continue;
}
// Fat-projections kill many registers which cannot be used to
// hold live ranges.
if( lrgs(r)._fat_proj ) {
// Count the int-only registers
RegMask itmp = lrgs(r).mask();
itmp.AND(*Matcher::idealreg2regmask[Op_RegI]);
int iregs = itmp.Size();
#ifdef EXACT_PRESSURE
if( pressure[0]+iregs > b->_reg_pressure )
b->_reg_pressure = pressure[0]+iregs;
#endif
if( pressure[0] <= (uint)INTPRESSURE &&
pressure[0]+iregs > (uint)INTPRESSURE ) {
#ifndef EXACT_PRESSURE
b->_reg_pressure = (uint)INTPRESSURE+1;
#endif
hrp_index[0] = j-1;
}
// Count the float-only registers
RegMask ftmp = lrgs(r).mask();
ftmp.AND(*Matcher::idealreg2regmask[Op_RegD]);
int fregs = ftmp.Size();
#ifdef EXACT_PRESSURE
if( pressure[1]+fregs > b->_freg_pressure )
b->_freg_pressure = pressure[1]+fregs;
#endif
if( pressure[1] <= (uint)FLOATPRESSURE &&
pressure[1]+fregs > (uint)FLOATPRESSURE ) {
#ifndef EXACT_PRESSURE
b->_freg_pressure = (uint)FLOATPRESSURE+1;
#endif
hrp_index[1] = j-1;
}
}
} else { // Else it is live
// A DEF also ends 'area' partway through the block.
lrgs(r)._area -= cost;
assert( lrgs(r)._area >= 0, "negative spill area" );
// Insure high score for immediate-use spill copies so they get a color
if( n->is_SpillCopy()
&& lrgs(r)._def != NodeSentinel // MultiDef live range can still split
&& n->outcnt() == 1 // and use must be in this block
&& _cfg._bbs[n->unique_out()->_idx] == b ) {
// All single-use MachSpillCopy(s) that immediately precede their
// use must color early. If a longer live range steals their
// color, the spill copy will split and may push another spill copy
// further away resulting in an infinite spill-split-retry cycle.
// Assigning a zero area results in a high score() and a good
// location in the simplify list.
//
Node *single_use = n->unique_out();
assert( b->find_node(single_use) >= j, "Use must be later in block");
// Use can be earlier in block if it is a Phi, but then I should be a MultiDef
// Find first non SpillCopy 'm' that follows the current instruction
// (j - 1) is index for current instruction 'n'
Node *m = n;
for( uint i = j; i <= last_inst && m->is_SpillCopy(); ++i ) { m = b->_nodes[i]; }
if( m == single_use ) {
lrgs(r)._area = 0.0;
}
}
// Remove from live-out set
if( liveout.remove(r) ) {
// Adjust register pressure.
// Capture last hi-to-lo pressure transition
lower_pressure( &lrgs(r), j-1, b, pressure, hrp_index );
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
}
// Copies do not define a new value and so do not interfere.
// Remove the copies source from the liveout set before interfering.
uint idx = n->is_Copy();
if( idx ) {
uint x = n2lidx(n->in(idx));
if( liveout.remove( x ) ) {
lrgs(x)._area -= cost;
// Adjust register pressure.
lower_pressure( &lrgs(x), j-1, b, pressure, hrp_index );
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
}
}
} // End of if live or not
// Interfere with everything live. If the defined value must
// go in a particular register, just remove that register from
// all conflicting parties and avoid the interference.
// Make exclusions for rematerializable defs. Since rematerializable
// DEFs are not bound but the live range is, some uses must be bound.
// If we spill live range 'r', it can rematerialize at each use site
// according to its bindings.
const RegMask &rmask = lrgs(r).mask();
if( lrgs(r).is_bound() && !(n->rematerialize()) && rmask.is_NotEmpty() ) {
// Smear odd bits; leave only aligned pairs of bits.
RegMask r2mask = rmask;
r2mask.SmearToPairs();
// Check for common case
int r_size = lrgs(r).num_regs();
OptoReg::Name r_reg = (r_size == 1) ? rmask.find_first_elem() : OptoReg::Physical;
IndexSetIterator elements(&liveout);
uint l;
while ((l = elements.next()) != 0) {
LRG &lrg = lrgs(l);
// If 'l' must spill already, do not further hack his bits.
// He'll get some interferences and be forced to spill later.
if( lrg._must_spill ) continue;
// Remove bound register(s) from 'l's choices
RegMask old = lrg.mask();
uint old_size = lrg.mask_size();
// Remove the bits from LRG 'r' from LRG 'l' so 'l' no
// longer interferes with 'r'. If 'l' requires aligned
// adjacent pairs, subtract out bit pairs.
if( lrg.num_regs() == 2 && !lrg._fat_proj ) {
lrg.SUBTRACT( r2mask );
lrg.compute_set_mask_size();
} else if( r_size != 1 ) {
lrg.SUBTRACT( rmask );
lrg.compute_set_mask_size();
} else { // Common case: size 1 bound removal
if( lrg.mask().Member(r_reg) ) {
lrg.Remove(r_reg);
lrg.set_mask_size(lrg.mask().is_AllStack() ? 65535:old_size-1);
}
}
// If 'l' goes completely dry, it must spill.
if( lrg.not_free() ) {
// Give 'l' some kind of reasonable mask, so he picks up
// interferences (and will spill later).
lrg.set_mask( old );
lrg.set_mask_size(old_size);
must_spill++;
lrg._must_spill = 1;
lrg.set_reg(OptoReg::Name(LRG::SPILL_REG));
}
}
} // End of if bound
// Now interference with everything that is live and has
// compatible register sets.
interfere_with_live(r,&liveout);
} // End of if normal register-allocated value
cost -= b->_freq; // Area remaining in the block
if( cost < 0.0 ) cost = 0.0; // Cost goes negative in the Phi area
// Make all inputs live
if( !n->is_Phi() ) { // Phi function uses come from prior block
JVMState* jvms = n->jvms();
uint debug_start = jvms ? jvms->debug_start() : 999999;
// Start loop at 1 (skip control edge) for most Nodes.
// SCMemProj's might be the sole use of a StoreLConditional.
// While StoreLConditionals set memory (the SCMemProj use)
// they also def flags; if that flag def is unused the
// allocator sees a flag-setting instruction with no use of
// the flags and assumes it's dead. This keeps the (useless)
// flag-setting behavior alive while also keeping the (useful)
// memory update effect.
for( uint k = ((n->Opcode() == Op_SCMemProj) ? 0:1); k < n->req(); k++ ) {
Node *def = n->in(k);
uint x = n2lidx(def);
if( !x ) continue;
LRG &lrg = lrgs(x);
// No use-side cost for spilling debug info
if( k < debug_start )
// A USE costs twice block frequency (once for the Load, once
// for a Load-delay). Rematerialized uses only cost once.
lrg._cost += (def->rematerialize() ? b->_freq : (b->_freq + b->_freq));
// It is live now
if( liveout.insert( x ) ) {
// Newly live things assumed live from here to top of block
lrg._area += cost;
// Adjust register pressure
if( lrg.mask().is_UP() && lrg.mask_size() ) {
if( lrg._is_float ) {
pressure[1] += lrg.reg_pressure();
#ifdef EXACT_PRESSURE
if( pressure[1] > b->_freg_pressure )
b->_freg_pressure = pressure[1];
#endif
} else if( lrg.mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) ) {
pressure[0] += lrg.reg_pressure();
#ifdef EXACT_PRESSURE
if( pressure[0] > b->_reg_pressure )
b->_reg_pressure = pressure[0];
#endif
}
}
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
}
assert( lrg._area >= 0, "negative spill area" );
}
}
} // End of reverse pass over all instructions in block
// If we run off the top of the block with high pressure and
// never see a hi-to-low pressure transition, just record that
// the whole block is high pressure.
if( pressure[0] > (uint)INTPRESSURE ) {
hrp_index[0] = 0;
#ifdef EXACT_PRESSURE
if( pressure[0] > b->_reg_pressure )
b->_reg_pressure = pressure[0];
#else
b->_reg_pressure = (uint)INTPRESSURE+1;
#endif
}
if( pressure[1] > (uint)FLOATPRESSURE ) {
hrp_index[1] = 0;
#ifdef EXACT_PRESSURE
if( pressure[1] > b->_freg_pressure )
b->_freg_pressure = pressure[1];
#else
b->_freg_pressure = (uint)FLOATPRESSURE+1;
#endif
}
// Compute high pressure indice; avoid landing in the middle of projnodes
j = hrp_index[0];
if( j < b->_nodes.size() && j < b->end_idx()+1 ) {
Node *cur = b->_nodes[j];
while( cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch() ) {
j--;
cur = b->_nodes[j];
}
}
b->_ihrp_index = j;
j = hrp_index[1];
if( j < b->_nodes.size() && j < b->end_idx()+1 ) {
Node *cur = b->_nodes[j];
while( cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch() ) {
j--;
cur = b->_nodes[j];
}
}
b->_fhrp_index = j;
#ifndef PRODUCT
// Gather Register Pressure Statistics
if( PrintOptoStatistics ) {
if( b->_reg_pressure > (uint)INTPRESSURE || b->_freg_pressure > (uint)FLOATPRESSURE )
_high_pressure++;
else
_low_pressure++;
}
#endif
} // End of for all blocks
return must_spill;
}