/*

 * Copyright (c) 1997, 2012, Oracle and/or its affiliates. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 *

 */

#ifndef SHARE_VM_OPTO_SUBNODE_HPP

#define SHARE_VM_OPTO_SUBNODE_HPP

#include "opto/node.hpp"

#include "opto/opcodes.hpp"

#include "opto/type.hpp"

// Portions of code courtesy of Clifford Click

//------------------------------SUBNode----------------------------------------

// Class SUBTRACTION functionality.  This covers all the usual 'subtract'

// behaviors.  Subtract-integer, -float, -double, binary xor, compare-integer,

// -float, and -double are all inherited from this class.  The compare

// functions behave like subtract functions, except that all negative answers

// are compressed into -1, and all positive answers compressed to 1.

class SubNode : public Node {

public:

  SubNode( Node *in1, Node *in2 ) : Node(0,in1,in2) {

    init_class_id(Class_Sub);

  }

  // Handle algebraic identities here.  If we have an identity, return the Node

  // we are equivalent to.  We look for "add of zero" as an identity.

  virtual Node *Identity( PhaseTransform *phase );

  // Compute a new Type for this node.  Basically we just do the pre-check,

  // then call the virtual add() to set the type.

  virtual const Type *Value( PhaseTransform *phase ) const;

  // Supplied function returns the subtractend of the inputs.

  // This also type-checks the inputs for sanity.  Guaranteed never to

  // be passed a TOP or BOTTOM type, these are filtered out by a pre-check.

  virtual const Type *sub( const Type *, const Type * ) const = 0;

  // Supplied function to return the additive identity type.

  // This is returned whenever the subtracts inputs are the same.

  virtual const Type *add_id() const = 0;

};

// NOTE: SubINode should be taken away and replaced by add and negate

//------------------------------SubINode---------------------------------------

// Subtract 2 integers

class SubINode : public SubNode {

public:

  SubINode( Node *in1, Node *in2 ) : SubNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

  const Type *add_id() const { return TypeInt::ZERO; }

  const Type *bottom_type() const { return TypeInt::INT; }

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------SubLNode---------------------------------------

// Subtract 2 integers

class SubLNode : public SubNode {

public:

  SubLNode( Node *in1, Node *in2 ) : SubNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

  const Type *add_id() const { return TypeLong::ZERO; }

  const Type *bottom_type() const { return TypeLong::LONG; }

  virtual uint ideal_reg() const { return Op_RegL; }

};

// NOTE: SubFPNode should be taken away and replaced by add and negate

//------------------------------SubFPNode--------------------------------------

// Subtract 2 floats or doubles

class SubFPNode : public SubNode {

protected:

  SubFPNode( Node *in1, Node *in2 ) : SubNode(in1,in2) {}

public:

  const Type *Value( PhaseTransform *phase ) const;

};

// NOTE: SubFNode should be taken away and replaced by add and negate

//------------------------------SubFNode---------------------------------------

// Subtract 2 doubles

class SubFNode : public SubFPNode {

public:

  SubFNode( Node *in1, Node *in2 ) : SubFPNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

  const Type   *add_id() const { return TypeF::ZERO; }

  const Type   *bottom_type() const { return Type::FLOAT; }

  virtual uint  ideal_reg() const { return Op_RegF; }

};

// NOTE: SubDNode should be taken away and replaced by add and negate

//------------------------------SubDNode---------------------------------------

// Subtract 2 doubles

class SubDNode : public SubFPNode {

public:

  SubDNode( Node *in1, Node *in2 ) : SubFPNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

  const Type   *add_id() const { return TypeD::ZERO; }

  const Type   *bottom_type() const { return Type::DOUBLE; }

  virtual uint  ideal_reg() const { return Op_RegD; }

};

//------------------------------CmpNode---------------------------------------

// Compare 2 values, returning condition codes (-1, 0 or 1).

class CmpNode : public SubNode {

public:

  CmpNode( Node *in1, Node *in2 ) : SubNode(in1,in2) {

    init_class_id(Class_Cmp);

  }

  virtual Node *Identity( PhaseTransform *phase );

  const Type *add_id() const { return TypeInt::ZERO; }

  const Type *bottom_type() const { return TypeInt::CC; }

  virtual uint ideal_reg() const { return Op_RegFlags; }

};

//------------------------------CmpINode---------------------------------------

// Compare 2 signed values, returning condition codes (-1, 0 or 1).

class CmpINode : public CmpNode {

public:

  CmpINode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

};

//------------------------------CmpUNode---------------------------------------

// Compare 2 unsigned values (integer or pointer), returning condition codes (-1, 0 or 1).

class CmpUNode : public CmpNode {

public:

  CmpUNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual const Type *sub( const Type *, const Type * ) const;

  bool is_index_range_check() const;

};

//------------------------------CmpPNode---------------------------------------

// Compare 2 pointer values, returning condition codes (-1, 0 or 1).

class CmpPNode : public CmpNode {

public:

  CmpPNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

};

//------------------------------CmpNNode--------------------------------------

// Compare 2 narrow oop values, returning condition codes (-1, 0 or 1).

class CmpNNode : public CmpNode {

public:

  CmpNNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *sub( const Type *, const Type * ) const;

};

//------------------------------CmpLNode---------------------------------------

// Compare 2 long values, returning condition codes (-1, 0 or 1).

class CmpLNode : public CmpNode {

public:

  CmpLNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int    Opcode() const;

  virtual const Type *sub( const Type *, const Type * ) const;

};

//------------------------------CmpL3Node--------------------------------------

// Compare 2 long values, returning integer value (-1, 0 or 1).

class CmpL3Node : public CmpLNode {

public:

  CmpL3Node( Node *in1, Node *in2 ) : CmpLNode(in1,in2) {

    // Since it is not consumed by Bools, it is not really a Cmp.

    init_class_id(Class_Sub);

  }

  virtual int    Opcode() const;

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------CmpFNode---------------------------------------

// Compare 2 float values, returning condition codes (-1, 0 or 1).

// This implements the Java bytecode fcmpl, so unordered returns -1.

// Operands may not commute.

class CmpFNode : public CmpNode {

public:

  CmpFNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual const Type *sub( const Type *, const Type * ) const { ShouldNotReachHere(); return NULL; }

  const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------CmpF3Node--------------------------------------

// Compare 2 float values, returning integer value (-1, 0 or 1).

// This implements the Java bytecode fcmpl, so unordered returns -1.

// Operands may not commute.

class CmpF3Node : public CmpFNode {

public:

  CmpF3Node( Node *in1, Node *in2 ) : CmpFNode(in1,in2) {

    // Since it is not consumed by Bools, it is not really a Cmp.

    init_class_id(Class_Sub);

  }

  virtual int Opcode() const;

  // Since it is not consumed by Bools, it is not really a Cmp.

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------CmpDNode---------------------------------------

// Compare 2 double values, returning condition codes (-1, 0 or 1).

// This implements the Java bytecode dcmpl, so unordered returns -1.

// Operands may not commute.

class CmpDNode : public CmpNode {

public:

  CmpDNode( Node *in1, Node *in2 ) : CmpNode(in1,in2) {}

  virtual int Opcode() const;

  virtual const Type *sub( const Type *, const Type * ) const { ShouldNotReachHere(); return NULL; }

  const Type *Value( PhaseTransform *phase ) const;

  virtual Node  *Ideal(PhaseGVN *phase, bool can_reshape);

};

//------------------------------CmpD3Node--------------------------------------

// Compare 2 double values, returning integer value (-1, 0 or 1).

// This implements the Java bytecode dcmpl, so unordered returns -1.

// Operands may not commute.

class CmpD3Node : public CmpDNode {

public:

  CmpD3Node( Node *in1, Node *in2 ) : CmpDNode(in1,in2) {

    // Since it is not consumed by Bools, it is not really a Cmp.

    init_class_id(Class_Sub);

  }

  virtual int Opcode() const;

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------BoolTest---------------------------------------

// Convert condition codes to a boolean test value (0 or -1).

// We pick the values as 3 bits; the low order 2 bits we compare against the

// condition codes, the high bit flips the sense of the result.

struct BoolTest VALUE_OBJ_CLASS_SPEC {

  enum mask { eq = 0, ne = 4, le = 5, ge = 7, lt = 3, gt = 1, illegal = 8 };

  mask _test;

  BoolTest( mask btm ) : _test(btm) {}

  const Type *cc2logical( const Type *CC ) const;

  // Commute the test.  I use a small table lookup.  The table is created as

  // a simple char array where each element is the ASCII version of a 'mask'

  // enum from above.

  mask commute( ) const { return mask("038147858"[_test]-'0'); }

  mask negate( ) const { return mask(_test^4); }

  bool is_canonical( ) const { return (_test == BoolTest::ne || _test == BoolTest::lt || _test == BoolTest::le); }

#ifndef PRODUCT

  void dump_on(outputStream *st) const;

#endif

};

//------------------------------BoolNode---------------------------------------

// A Node to convert a Condition Codes to a Logical result.

class BoolNode : public Node {

  virtual uint hash() const;

  virtual uint cmp( const Node &n ) const;

  virtual uint size_of() const;

public:

  const BoolTest _test;

  BoolNode( Node *cc, BoolTest::mask t): _test(t), Node(0,cc) {

    init_class_id(Class_Bool);

  }

  // Convert an arbitrary int value to a Bool or other suitable predicate.

  static Node* make_predicate(Node* test_value, PhaseGVN* phase);

  // Convert self back to an integer value.

  Node* as_int_value(PhaseGVN* phase);

  // Invert sense of self, returning new Bool.

  BoolNode* negate(PhaseGVN* phase);

  virtual int Opcode() const;

  virtual Node *Ideal(PhaseGVN *phase, bool can_reshape);

  virtual const Type *Value( PhaseTransform *phase ) const;

  virtual const Type *bottom_type() const { return TypeInt::BOOL; }

  uint match_edge(uint idx) const { return 0; }

  virtual uint ideal_reg() const { return Op_RegI; }

  bool is_counted_loop_exit_test();

#ifndef PRODUCT

  virtual void dump_spec(outputStream *st) const;

#endif

};

//------------------------------AbsNode----------------------------------------

// Abstract class for absolute value.  Mostly used to get a handy wrapper

// for finding this pattern in the graph.

class AbsNode : public Node {

public:

  AbsNode( Node *value ) : Node(0,value) {}

};

//------------------------------AbsINode---------------------------------------

// Absolute value an integer.  Since a naive graph involves control flow, we

// "match" it in the ideal world (so the control flow can be removed).

class AbsINode : public AbsNode {

public:

  AbsINode( Node *in1 ) : AbsNode(in1) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return TypeInt::INT; }

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------AbsFNode---------------------------------------

// Absolute value a float, a common float-point idiom with a cheap hardware

// implemention on most chips.  Since a naive graph involves control flow, we

// "match" it in the ideal world (so the control flow can be removed).

class AbsFNode : public AbsNode {

public:

  AbsFNode( Node *in1 ) : AbsNode(in1) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::FLOAT; }

  virtual uint ideal_reg() const { return Op_RegF; }

};

//------------------------------AbsDNode---------------------------------------

// Absolute value a double, a common float-point idiom with a cheap hardware

// implemention on most chips.  Since a naive graph involves control flow, we

// "match" it in the ideal world (so the control flow can be removed).

class AbsDNode : public AbsNode {

public:

  AbsDNode( Node *in1 ) : AbsNode(in1) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

};

//------------------------------CmpLTMaskNode----------------------------------

// If p < q, return -1 else return 0.  Nice for flow-free idioms.

class CmpLTMaskNode : public Node {

public:

  CmpLTMaskNode( Node *p, Node *q ) : Node(0, p, q) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return TypeInt::INT; }

  virtual uint ideal_reg() const { return Op_RegI; }

};

//------------------------------NegNode----------------------------------------

class NegNode : public Node {

public:

  NegNode( Node *in1 ) : Node(0,in1) {}

};

//------------------------------NegFNode---------------------------------------

// Negate value a float.  Negating 0.0 returns -0.0, but subtracting from

// zero returns +0.0 (per JVM spec on 'fneg' bytecode).  As subtraction

// cannot be used to replace negation we have to implement negation as ideal

// node; note that negation and addition can replace subtraction.

class NegFNode : public NegNode {

public:

  NegFNode( Node *in1 ) : NegNode(in1) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::FLOAT; }

  virtual uint ideal_reg() const { return Op_RegF; }

};

//------------------------------NegDNode---------------------------------------

// Negate value a double.  Negating 0.0 returns -0.0, but subtracting from

// zero returns +0.0 (per JVM spec on 'dneg' bytecode).  As subtraction

// cannot be used to replace negation we have to implement negation as ideal

// node; note that negation and addition can replace subtraction.

class NegDNode : public NegNode {

public:

  NegDNode( Node *in1 ) : NegNode(in1) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

};

//------------------------------CosDNode---------------------------------------

// Cosinus of a double

class CosDNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------CosDNode---------------------------------------

// Sinus of a double

class SinDNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------TanDNode---------------------------------------

// tangens of a double

class TanDNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------AtanDNode--------------------------------------

// arcus tangens of a double

class AtanDNode : public Node {

public:

  AtanDNode(Node *c, Node *in1, Node *in2  ) : Node(c, in1, in2) {}

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

};

//------------------------------SqrtDNode--------------------------------------

// square root a double

class SqrtDNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------ExpDNode---------------------------------------

//  Exponentiate a double

class ExpDNode : public Node {

public:

  ExpDNode(Compile* C, Node *c, Node *in1) : Node(c, in1) {

    init_flags(Flag_is_expensive);

    C->add_expensive_node(this);

  }

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------LogDNode---------------------------------------

// Log_e of a double

class LogDNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------Log10DNode---------------------------------------

// Log_10 of a double

class Log10DNode : public Node {

public:

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//------------------------------PowDNode---------------------------------------

// Raise a double to a double power

class PowDNode : public Node {

public:

  PowDNode(Compile* C, Node *c, Node *in1, Node *in2 ) : Node(c, in1, in2) {

    init_flags(Flag_is_expensive);

    C->add_expensive_node(this);

  }

  virtual int Opcode() const;

  const Type *bottom_type() const { return Type::DOUBLE; }

  virtual uint ideal_reg() const { return Op_RegD; }

  virtual const Type *Value( PhaseTransform *phase ) const;

};

//-------------------------------ReverseBytesINode--------------------------------