--- a/.hgtags-top-repo Thu Dec 08 21:21:56 2016 +0000
+++ b/.hgtags-top-repo Wed Jul 05 22:32:59 2017 +0200
@@ -390,3 +390,4 @@
ff98aa9ec9fae991e426ce5926fc9036d25f5562 jdk-9+145
a22e2671d88f6b22a4aa82e3966986542ed2a381 jdk-9+146
5f6920274c48eb00d31afee6c034826a754c13d9 jdk-9+147
+3ffc3e886c74736e387f3685e86b557cdea706c8 jdk-9+148
--- a/common/autoconf/generated-configure.sh Thu Dec 08 21:21:56 2016 +0000
+++ b/common/autoconf/generated-configure.sh Wed Jul 05 22:32:59 2017 +0200
@@ -671,6 +671,8 @@
LLVM_LDFLAGS
LLVM_CFLAGS
LLVM_CONFIG
+LIBFFI_LIB_FILE
+ENABLE_LIBFFI_BUNDLING
LIBFFI_LIBS
LIBFFI_CFLAGS
ALSA_LIBS
@@ -1208,6 +1210,7 @@
with_libffi
with_libffi_include
with_libffi_lib
+enable_libffi_bundling
with_libjpeg
with_giflib
with_libpng
@@ -1990,6 +1993,9 @@
disable bundling of the freetype library with the
build result [enabled on Windows or when using
--with-freetype, disabled otherwise]
+ --enable-libffi-bundling
+ enable bundling of libffi.so to make the built JDK
+ runnable on more systems
--enable-jtreg-failure-handler
forces build of the jtreg failure handler to be
enabled, missing dependencies become fatal errors.
@@ -4171,7 +4177,7 @@
ffi)
PKGHANDLER_COMMAND="sudo apt-get install libffi-dev" ;;
x11)
- PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libx11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
ccache)
PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
dtrace)
@@ -5082,7 +5088,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1480714260
+DATE_WHEN_GENERATED=1481104795
###############################################################################
#
@@ -24451,11 +24457,10 @@
fi
else
if test "x$NO_DEFAULT_VERSION_PARTS" != xtrue; then
- # Default is to calculate a string like this <timestamp>.<username>.<base dir name>
- timestamp=`$DATE '+%Y-%m-%d-%H%M%S'`
+ # Default is to calculate a string like this 'adhoc.<username>.<base dir name>'
# Outer [ ] to quote m4.
basedirname=`$BASENAME "$TOPDIR" | $TR -d -c '[a-z][A-Z][0-9].-'`
- VERSION_OPT="$timestamp.$USERNAME.$basedirname"
+ VERSION_OPT="adhoc.$USERNAME.$basedirname"
fi
fi
@@ -62634,6 +62639,11 @@
withval=$with_libffi_lib;
fi
+ # Check whether --enable-libffi-bundling was given.
+if test "${enable_libffi_bundling+set}" = set; then :
+ enableval=$enable_libffi_bundling;
+fi
+
if test "x$NEEDS_LIB_FFI" = xfalse; then
if (test "x${with_libffi}" != x && test "x${with_libffi}" != xno) || \
@@ -62652,6 +62662,7 @@
fi
if test "x${with_libffi}" != x; then
+ LIBFFI_LIB_PATH="${with_libffi}/lib"
LIBFFI_LIBS="-L${with_libffi}/lib -lffi"
LIBFFI_CFLAGS="-I${with_libffi}/include"
LIBFFI_FOUND=yes
@@ -62661,6 +62672,7 @@
LIBFFI_FOUND=yes
fi
if test "x${with_libffi_lib}" != x; then
+ LIBFFI_LIB_PATH="${with_libffi_lib}"
LIBFFI_LIBS="-L${with_libffi_lib} -lffi"
LIBFFI_FOUND=yes
fi
@@ -62870,7 +62882,70 @@
as_fn_error $? "Found libffi but could not link and compile with it. $HELP_MSG" "$LINENO" 5
fi
- fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libffi should be bundled" >&5
+$as_echo_n "checking if libffi should be bundled... " >&6; }
+ if test "x$enable_libffi_bundling" = "x"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ENABLE_LIBFFI_BUNDLING=false
+ elif test "x$enable_libffi_bundling" = "xno"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, forced" >&5
+$as_echo "no, forced" >&6; }
+ ENABLE_LIBFFI_BUNDLING=false
+ elif test "x$enable_libffi_bundling" = "xyes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, forced" >&5
+$as_echo "yes, forced" >&6; }
+ ENABLE_LIBFFI_BUNDLING=true
+ else
+ as_fn_error $? "Invalid value for --enable-libffi-bundling" "$LINENO" 5
+ fi
+
+ # Find the libffi.so.X to bundle
+ if test "x${ENABLE_LIBFFI_BUNDLING}" = "xtrue"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libffi lib file location" >&5
+$as_echo_n "checking for libffi lib file location... " >&6; }
+ if test "x${LIBFFI_LIB_PATH}" != x; then
+ if test -e ${LIBFFI_LIB_PATH}/libffi.so.?; then
+ LIBFFI_LIB_FILE="${LIBFFI_LIB_PATH}/libffi.so.?"
+ else
+ as_fn_error $? "Could not locate libffi.so.? for bundling in ${LIBFFI_LIB_PATH}" "$LINENO" 5
+ fi
+ else
+ # If we don't have an explicit path, look in a few obvious places
+ if test "x${OPENJDK_TARGET_CPU}" = "xx86"; then
+ if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
+ elif test -e ${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.?"
+ else
+ as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
+ fi
+ elif test "x${OPENJDK_TARGET_CPU}" = "xx86_64"; then
+ if test -e ${SYSROOT}/usr/lib64/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib64/libffi.so.?"
+ elif test -e ${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.?"
+ else
+ as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
+ fi
+ else
+ # Fallback on the default /usr/lib dir
+ if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
+ else
+ as_fn_error $? "Could not locate libffi.so.? for bundling" "$LINENO" 5
+ fi
+ fi
+ fi
+ # Make sure the wildcard is evaluated
+ LIBFFI_LIB_FILE="$(ls ${LIBFFI_LIB_FILE})"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${LIBFFI_LIB_FILE}" >&5
+$as_echo "${LIBFFI_LIB_FILE}" >&6; }
+ fi
+ fi
+
+
--- a/common/autoconf/help.m4 Thu Dec 08 21:21:56 2016 +0000
+++ b/common/autoconf/help.m4 Wed Jul 05 22:32:59 2017 +0200
@@ -116,7 +116,7 @@
ffi)
PKGHANDLER_COMMAND="sudo apt-get install libffi-dev" ;;
x11)
- PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libx11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
ccache)
PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
dtrace)
--- a/common/autoconf/jdk-version.m4 Thu Dec 08 21:21:56 2016 +0000
+++ b/common/autoconf/jdk-version.m4 Wed Jul 05 22:32:59 2017 +0200
@@ -160,11 +160,10 @@
fi
else
if test "x$NO_DEFAULT_VERSION_PARTS" != xtrue; then
- # Default is to calculate a string like this <timestamp>.<username>.<base dir name>
- timestamp=`$DATE '+%Y-%m-%d-%H%M%S'`
+ # Default is to calculate a string like this 'adhoc.<username>.<base dir name>'
# Outer [ ] to quote m4.
[ basedirname=`$BASENAME "$TOPDIR" | $TR -d -c '[a-z][A-Z][0-9].-'` ]
- VERSION_OPT="$timestamp.$USERNAME.$basedirname"
+ VERSION_OPT="adhoc.$USERNAME.$basedirname"
fi
fi
--- a/common/autoconf/lib-ffi.m4 Thu Dec 08 21:21:56 2016 +0000
+++ b/common/autoconf/lib-ffi.m4 Wed Jul 05 22:32:59 2017 +0200
@@ -35,6 +35,8 @@
[specify directory for the libffi include files])])
AC_ARG_WITH(libffi-lib, [AS_HELP_STRING([--with-libffi-lib],
[specify directory for the libffi library])])
+ AC_ARG_ENABLE(libffi-bundling, [AS_HELP_STRING([--enable-libffi-bundling],
+ [enable bundling of libffi.so to make the built JDK runnable on more systems])])
if test "x$NEEDS_LIB_FFI" = xfalse; then
if (test "x${with_libffi}" != x && test "x${with_libffi}" != xno) || \
@@ -52,6 +54,7 @@
fi
if test "x${with_libffi}" != x; then
+ LIBFFI_LIB_PATH="${with_libffi}/lib"
LIBFFI_LIBS="-L${with_libffi}/lib -lffi"
LIBFFI_CFLAGS="-I${with_libffi}/include"
LIBFFI_FOUND=yes
@@ -61,6 +64,7 @@
LIBFFI_FOUND=yes
fi
if test "x${with_libffi_lib}" != x; then
+ LIBFFI_LIB_PATH="${with_libffi_lib}"
LIBFFI_LIBS="-L${with_libffi_lib} -lffi"
LIBFFI_FOUND=yes
fi
@@ -109,8 +113,65 @@
HELP_MSG_MISSING_DEPENDENCY([ffi])
AC_MSG_ERROR([Found libffi but could not link and compile with it. $HELP_MSG])
fi
+
+ AC_MSG_CHECKING([if libffi should be bundled])
+ if test "x$enable_libffi_bundling" = "x"; then
+ AC_MSG_RESULT([no])
+ ENABLE_LIBFFI_BUNDLING=false
+ elif test "x$enable_libffi_bundling" = "xno"; then
+ AC_MSG_RESULT([no, forced])
+ ENABLE_LIBFFI_BUNDLING=false
+ elif test "x$enable_libffi_bundling" = "xyes"; then
+ AC_MSG_RESULT([yes, forced])
+ ENABLE_LIBFFI_BUNDLING=true
+ else
+ AC_MSG_ERROR([Invalid value for --enable-libffi-bundling])
+ fi
+
+ # Find the libffi.so.X to bundle
+ if test "x${ENABLE_LIBFFI_BUNDLING}" = "xtrue"; then
+ AC_MSG_CHECKING([for libffi lib file location])
+ if test "x${LIBFFI_LIB_PATH}" != x; then
+ if test -e ${LIBFFI_LIB_PATH}/libffi.so.?; then
+ LIBFFI_LIB_FILE="${LIBFFI_LIB_PATH}/libffi.so.?"
+ else
+ AC_MSG_ERROR([Could not locate libffi.so.? for bundling in ${LIBFFI_LIB_PATH}])
+ fi
+ else
+ # If we don't have an explicit path, look in a few obvious places
+ if test "x${OPENJDK_TARGET_CPU}" = "xx86"; then
+ if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
+ elif test -e ${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/i386-linux-gnu/libffi.so.?"
+ else
+ AC_MSG_ERROR([Could not locate libffi.so.? for bundling])
+ fi
+ elif test "x${OPENJDK_TARGET_CPU}" = "xx86_64"; then
+ if test -e ${SYSROOT}/usr/lib64/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib64/libffi.so.?"
+ elif test -e ${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/x86_64-linux-gnu/libffi.so.?"
+ else
+ AC_MSG_ERROR([Could not locate libffi.so.? for bundling])
+ fi
+ else
+ # Fallback on the default /usr/lib dir
+ if test -e ${SYSROOT}/usr/lib/libffi.so.? ; then
+ LIBFFI_LIB_FILE="${SYSROOT}/usr/lib/libffi.so.?"
+ else
+ AC_MSG_ERROR([Could not locate libffi.so.? for bundling])
+ fi
+ fi
+ fi
+ # Make sure the wildcard is evaluated
+ LIBFFI_LIB_FILE="$(ls ${LIBFFI_LIB_FILE})"
+ AC_MSG_RESULT([${LIBFFI_LIB_FILE}])
+ fi
fi
AC_SUBST(LIBFFI_CFLAGS)
AC_SUBST(LIBFFI_LIBS)
+ AC_SUBST(ENABLE_LIBFFI_BUNDLING)
+ AC_SUBST(LIBFFI_LIB_FILE)
])
--- a/common/autoconf/spec.gmk.in Thu Dec 08 21:21:56 2016 +0000
+++ b/common/autoconf/spec.gmk.in Wed Jul 05 22:32:59 2017 +0200
@@ -319,6 +319,8 @@
ALSA_CFLAGS:=@ALSA_CFLAGS@
LIBFFI_LIBS:=@LIBFFI_LIBS@
LIBFFI_CFLAGS:=@LIBFFI_CFLAGS@
+ENABLE_LIBFFI_BUNDLING:=@ENABLE_LIBFFI_BUNDLING@
+LIBFFI_LIB_FILE:=@LIBFFI_LIB_FILE@
PACKAGE_PATH=@PACKAGE_PATH@
--- a/common/conf/jib-profiles.js Thu Dec 08 21:21:56 2016 +0000
+++ b/common/conf/jib-profiles.js Wed Jul 05 22:32:59 2017 +0200
@@ -346,6 +346,35 @@
// Generate debug profiles for the open jprt profiles
profiles = concatObjects(profiles, generateDebugProfiles(common, openOnlyProfiles));
+ // Profiles for building the zero jvm variant. These are used for verification
+ // in JPRT.
+ var zeroProfiles = {
+ "linux-x64-zero": {
+ target_os: "linux",
+ target_cpu: "x64",
+ dependencies: concat(common.dependencies, "devkit"),
+ configure_args: concat(common.configure_args,
+ "--with-zlib=system",
+ "--with-jvm-variants=zero",
+ "--enable-libffi-bundling"),
+ default_make_targets: common.default_make_targets
+ },
+
+ "linux-x86-zero": {
+ target_os: "linux",
+ target_cpu: "x86",
+ build_cpu: "x64",
+ dependencies: concat(common.dependencies, "devkit"),
+ configure_args: concat(common.configure_args, common.configure_args_32bit,
+ "--with-zlib=system",
+ "--with-jvm-variants=zero",
+ "--enable-libffi-bundling"),
+ default_make_targets: common.default_make_targets
+ },
+ }
+ profiles = concatObjects(profiles, zeroProfiles);
+ profiles = concatObjects(profiles, generateDebugProfiles(common, zeroProfiles));
+
// Profiles used to run tests. Used in JPRT.
var testOnlyProfiles = {
@@ -380,7 +409,7 @@
+ (input.build_cpu == "x86" ? "i586" : input.build_cpu);
var devkit_platform_revisions = {
- linux_x64: "gcc4.9.2-OEL6.4+1.0",
+ linux_x64: "gcc4.9.2-OEL6.4+1.1",
macosx_x64: "Xcode6.3-MacOSX10.9+1.0",
solaris_x64: "SS12u4-Solaris11u1+1.0",
solaris_sparcv9: "SS12u4-Solaris11u1+1.0",
--- a/make/Javadoc.gmk Thu Dec 08 21:21:56 2016 +0000
+++ b/make/Javadoc.gmk Wed Jul 05 22:32:59 2017 +0200
@@ -499,6 +499,21 @@
################################################################################
+$(eval $(call SetupJavadocGeneration, httpclient, \
+ MODULES := jdk.incubator.httpclient, \
+ PACKAGES := \
+ jdk.incubator.http, \
+ API_ROOT := jre, \
+ DEST_DIR := incubator/httpclient/spec, \
+ TITLE := Java™ HTTP Client API (incubator module), \
+ FIRST_COPYRIGHT_YEAR := 2015, \
+ DISABLED_DOCLINT := accessibility missing syntax, \
+))
+
+TARGETS += $(httpclient)
+
+################################################################################
+
$(eval $(call SetupJavadocGeneration, jsobject, \
MODULES := jdk.jsobject, \
PACKAGES := netscape.javascript, \
--- a/make/common/MakeBase.gmk Thu Dec 08 21:21:56 2016 +0000
+++ b/make/common/MakeBase.gmk Wed Jul 05 22:32:59 2017 +0200
@@ -507,14 +507,18 @@
if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi
endef
else
- # Running mkdir and cp in the same shell speeds up copy intensive tasks in Cygwin
- # significantly.
define install-file
$(call MakeDir, $(@D))
$(CP) -fP '$<' '$@'
endef
endif
+# Variant of install file that does not preserve symlinks
+define install-file-nolink
+ $(call MakeDir, $(@D))
+ $(CP) -f '$<' '$@'
+endef
+
################################################################################
# Take two paths and return the path of the last common directory.
# Ex: /foo/bar/baz, /foo/bar/banan -> /foo/bar
--- a/make/common/Modules.gmk Thu Dec 08 21:21:56 2016 +0000
+++ b/make/common/Modules.gmk Wed Jul 05 22:32:59 2017 +0200
@@ -48,7 +48,6 @@
java.base \
java.datatransfer \
java.desktop \
- java.httpclient \
java.instrument \
java.logging \
java.management \
@@ -98,6 +97,7 @@
PLATFORM_MODULES += \
java.compiler \
+ jdk.incubator.httpclient \
java.scripting \
java.security.jgss \
java.smartcardio \
--- a/make/devkit/Tools.gmk Thu Dec 08 21:21:56 2016 +0000
+++ b/make/devkit/Tools.gmk Wed Jul 05 22:32:59 2017 +0200
@@ -85,8 +85,8 @@
libgcc \
elfutils elfutils-libs elfutils-devel \
elfutils-libelf elfutils-libelf-devel \
- zlib zlib-devel
-
+ zlib zlib-devel \
+ libffi libffi-devel
ifeq ($(ARCH),x86_64)
RPM_DIR ?= $(RPM_DIR_x86_64)
@@ -209,6 +209,18 @@
@touch $@
##########################################################################################
+# Create links for ffi header files so that they become visible by default when using the
+# devkit.
+
+$(SYSROOT)/usr/include/ffi.h: $(rpms)
+ cd $(@D) && rm $(@F) && ln -s ../lib/libffi-*/include/$(@F) .
+
+$(SYSROOT)/usr/include/ffitarget.h: $(rpms)
+ cd $(@D) && rm $(@F) && ln -s ../lib/libffi-*/include/$(@F) .
+
+SYSROOT_LINKS += $(SYSROOT)/usr/include/ffi.h $(SYSROOT)/usr/include/ffitarget.h
+
+##########################################################################################
# Define marker files for each source package to be compiled
$(foreach t,binutils mpfr gmp mpc gcc ccache,$(eval $(t) = $(TARGETDIR)/$($(t)_ver).done))
@@ -496,7 +508,7 @@
libs : $(libs)
sysroot : rpms libs
gcc : sysroot $(gcc) $(gccpatch)
-all : binutils gcc bfdlib $(PREFIX)/devkit.info $(missing-links)
+all : binutils gcc bfdlib $(PREFIX)/devkit.info $(missing-links) $(SYSROOT_LINKS)
# this is only built for host. so separate.
ccache : $(ccache)
--- a/make/jprt.properties Thu Dec 08 21:21:56 2016 +0000
+++ b/make/jprt.properties Wed Jul 05 22:32:59 2017 +0200
@@ -118,6 +118,12 @@
jprt.windows_i586.fastdebugOpen.build.jib.profile=windows-x86-open-debug
jprt.windows_x64.fastdebugOpen.build.jib.profile=windows-x64-open-debug
+jprt.linux_i586.productZero.build.jib.profile=linux-x86-zero
+jprt.linux_x64.productZero.build.jib.profile=linux-x64-zero
+
+jprt.linux_i586.fastdebugZero.build.jib.profile=linux-x86-zero-debug
+jprt.linux_x64.fastdebugZero.build.jib.profile=linux-x64-zero-debug
+
jprt.test.jib.profile=run-test
# Set make target to use for different build flavors
@@ -128,6 +134,8 @@
jprt.build.flavor.optimized.target=jprt_bundle
jprt.build.flavor.optimizedOpen.target=jprt_bundle
jprt.build.flavor.slowdebug.target=jprt_bundle
+jprt.build.flavor.productZero.target=jprt_bundle
+jprt.build.flavor.fastdebugZero.target=jprt_bundle
# Use these configure args to define debug level or provide specific
# configuration details not covered by Jib profiles.
@@ -181,7 +189,7 @@
jprt.build.configure.args= \
--with-output-sync=recurse \
--with-jobs=$ALT_PARALLEL_COMPILE_JOBS \
- --with-version-opt=$JPRT_JOB_ID \
+ --with-version-opt=$JPRT_JOB_ID \
${my.additional.build.configure.args.${jprt.test.set}} \
${my.custom.build.configure.args}
@@ -481,15 +489,15 @@
################################################################################
# Testset buildinfra
my.build.flavors.buildinfra = \
- product,fastdebug,slowdebug, \
+ product,fastdebug,slowdebug,productZero,fastdebugZero \
${my.additional.build.flavors.buildinfra}
# Platforms built for hotspot push jobs
my.build.targets.buildinfra = \
solaris_sparcv9_5.11-{product|fastdebug|slowdebug}, \
solaris_x64_5.11-{product|fastdebug|slowdebug}, \
- linux_i586_3.8-{product|fastdebug|slowdebug}, \
- linux_x64_3.8-{product|fastdebug|slowdebug}, \
+ linux_i586_3.8-{product|fastdebug|slowdebug|productZero|fastdebugZero}, \
+ linux_x64_3.8-{product|fastdebug|slowdebug|productZero|fastdebugZero}, \
macosx_x64_10.9-{product|fastdebug|slowdebug}, \
windows_i586_6.3-{product|fastdebug|slowdebug}, \
windows_x64_6.3-{product|fastdebug|slowdebug}, \
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/test/TestCommon.gmk Wed Jul 05 22:32:59 2017 +0200
@@ -0,0 +1,422 @@
+#
+# Copyright (c) 1995, 2016, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+#
+# Common logic to run various tests for a component, to be included by the
+# component specific test makefiles.
+#
+
+# Default values for some properties that can be overridden by components.
+USE_JTREG_VERSION ?= 4.2
+JTREG_VM_TYPE ?= -agentvm
+USE_JTREG_ASSERT ?= true
+LIMIT_JTREG_VM_MEMORY ?= true
+
+.DEFAULT : all
+
+# Empty these to get rid of some default rules
+.SUFFIXES:
+.SUFFIXES: .java
+CO=
+GET=
+
+# Utilities used
+AWK = awk
+CAT = cat
+CD = cd
+CHMOD = chmod
+CP = cp
+CUT = cut
+DIRNAME = dirname
+ECHO = echo
+EGREP = egrep
+EXPAND = expand
+FIND = find
+MKDIR = mkdir
+PWD = pwd
+RM = rm -f
+SED = sed
+SORT = sort
+TEE = tee
+UNAME = uname
+UNIQ = uniq
+WC = wc
+ZIPEXE = zip
+
+# Get OS name from uname (Cygwin inexplicably adds _NT-5.1)
+UNAME_S := $(shell $(UNAME) -s | $(CUT) -f1 -d_)
+
+# Commands to run on paths to make mixed paths for java on windows
+ifeq ($(findstring CYGWIN,$(UNAME_S)), CYGWIN)
+ # Location of developer shared files
+ SLASH_JAVA = J:
+ GETMIXEDPATH = cygpath -m
+ PLATFORM = windows
+else
+ # Location of developer shared files
+ SLASH_JAVA = /java
+ GETMIXEDPATH = $(ECHO)
+ PLATFORM = unix # we only care about windows or bsd.
+ ifeq ($(UNAME_S), Darwin)
+ PLATFORM = bsd
+ endif
+ ifeq ($(findstring BSD,$(UNAME_S)), BSD)
+ PLATFORM = bsd
+ endif
+endif
+
+ifdef ALT_SLASH_JAVA
+ SLASH_JAVA = $(ALT_SLASH_JAVA)
+endif
+
+# Root of this test area (important to use full paths in some places)
+TEST_ROOT := $(shell $(PWD))
+
+# Root of all test results
+ifdef TEST_OUTPUT_DIR
+ $(shell $(MKDIR) -p $(TEST_OUTPUT_DIR)/jtreg)
+ ABS_TEST_OUTPUT_DIR := \
+ $(shell $(CD) $(TEST_OUTPUT_DIR)/jtreg && $(PWD))
+else
+ ifdef ALT_OUTPUTDIR
+ ABS_OUTPUTDIR = $(shell $(CD) $(ALT_OUTPUTDIR) && $(PWD))
+ else
+ ABS_OUTPUTDIR = $(shell $(CD) $(TEST_ROOT)/.. && $(PWD))
+ endif
+
+ ABS_PLATFORM_BUILD_ROOT = $(ABS_OUTPUTDIR)
+ ABS_TEST_OUTPUT_DIR := $(ABS_PLATFORM_BUILD_ROOT)/testoutput/$(UNIQUE_DIR)
+endif
+
+# Expect JPRT to set PRODUCT_HOME (the product or jdk in this case to test)
+ifndef PRODUCT_HOME
+ # Try to use images/jdk if it exists
+ ABS_JDK_IMAGE = $(ABS_PLATFORM_BUILD_ROOT)/images/jdk
+ PRODUCT_HOME := \
+ $(shell \
+ if [ -d $(ABS_JDK_IMAGE) ] ; then \
+ $(ECHO) "$(ABS_JDK_IMAGE)"; \
+ else \
+ $(ECHO) "$(ABS_PLATFORM_BUILD_ROOT)"; \
+ fi)
+ PRODUCT_HOME := $(PRODUCT_HOME)
+endif
+
+# Expect JPRT to set JAVA_ARGS (e.g. -server etc.)
+ifdef JAVA_ARGS
+ JAVA_OPTIONS := $(JAVA_ARGS)
+else
+ JAVA_OPTIONS :=
+endif
+
+# Expect JPRT to set JPRT_PRODUCT_ARGS (e.g. -server etc.)
+# Should be passed into 'java' only.
+# Could include: -d64 -server -client OR any java option
+ifdef JPRT_PRODUCT_ARGS
+ JAVA_ARGS = $(JPRT_PRODUCT_ARGS)
+endif
+
+# Expect JPRT to set JPRT_PRODUCT_VM_ARGS (e.g. -Xcomp etc.)
+# Should be passed into anything running the vm (java, javac, javadoc, ...).
+ifdef JPRT_PRODUCT_VM_ARGS
+ JAVA_VM_ARGS = $(JPRT_PRODUCT_VM_ARGS)
+endif
+
+ifneq ($(NATIVE_TEST_PATH), )
+ # jtreg -nativepath <dir>
+ #
+ # Local make tests will be TEST_IMAGE_DIR and JPRT with jprt.use.reg.test.bundle=true
+ # should be JPRT_TESTNATIVE_PATH
+ ifdef TEST_IMAGE_DIR
+ TESTNATIVE_DIR = $(TEST_IMAGE_DIR)
+ else ifdef JPRT_TESTNATIVE_PATH
+ TESTNATIVE_DIR = $(JPRT_TESTNATIVE_PATH)
+ endif
+ ifdef TESTNATIVE_DIR
+ JTREG_NATIVE_PATH = -nativepath:$(shell $(GETMIXEDPATH) "$(TESTNATIVE_DIR)/$(NATIVE_TEST_PATH)")
+ endif
+endif
+
+ifeq ($(USE_FAILURE_HANDLER), true)
+ # jtreg failure handler config
+ ifeq ($(FAILURE_HANDLER_DIR), )
+ ifneq ($(TESTNATIVE_DIR), )
+ FAILURE_HANDLER_DIR := $(TESTNATIVE_DIR)/failure_handler
+ endif
+ endif
+ ifneq ($(FAILURE_HANDLER_DIR), )
+ FAILURE_HANDLER_DIR_MIXED := $(shell $(GETMIXEDPATH) "$(FAILURE_HANDLER_DIR)")
+ JTREG_FAILURE_HANDLER_OPTIONS := \
+ -timeoutHandlerDir:$(FAILURE_HANDLER_DIR_MIXED)/jtregFailureHandler.jar \
+ -observerDir:$(FAILURE_HANDLER_DIR_MIXED)/jtregFailureHandler.jar \
+ -timeoutHandler:jdk.test.failurehandler.jtreg.GatherProcessInfoTimeoutHandler \
+ -observer:jdk.test.failurehandler.jtreg.GatherDiagnosticInfoObserver \
+ -timeoutHandlerTimeout:0
+ ifeq ($(PLATFORM), windows)
+ JTREG_FAILURE_HANDLER_OPTIONS += -J-Djava.library.path="$(FAILURE_HANDLER_DIR_MIXED)"
+ endif
+ endif
+endif
+
+# Expect JPRT to set JPRT_ARCHIVE_BUNDLE (path to zip bundle for results)
+ifdef JPRT_ARCHIVE_BUNDLE
+ ARCHIVE_BUNDLE = $(JPRT_ARCHIVE_BUNDLE)
+else
+ ARCHIVE_BUNDLE = $(ABS_TEST_OUTPUT_DIR)/ARCHIVE_BUNDLE.zip
+endif
+
+# How to create the test bundle (pass or fail, we want to create this)
+# Follow command with ";$(BUNDLE_UP_AND_EXIT)", so it always gets executed.
+ZIP_UP_RESULTS = ( $(MKDIR) -p `$(DIRNAME) $(ARCHIVE_BUNDLE)` \
+ && $(CD) $(ABS_TEST_OUTPUT_DIR) \
+ && $(CHMOD) -R a+r . \
+ && $(ZIPEXE) -q -r $(ARCHIVE_BUNDLE) . )
+
+# important results files
+SUMMARY_TXT = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTreport/text/summary.txt")
+STATS_TXT_NAME = Stats.txt
+STATS_TXT = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/$(STATS_TXT_NAME)")
+RUNLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/runlist.txt")
+PASSLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/passlist.txt")
+FAILLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/faillist.txt")
+EXITCODE = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/exitcode.txt")
+
+TESTEXIT = \
+ if [ ! -s $(EXITCODE) ] ; then \
+ $(ECHO) "ERROR: EXITCODE file not filled in."; \
+ $(ECHO) "1" > $(EXITCODE); \
+ fi ; \
+ testExitCode=`$(CAT) $(EXITCODE)`; \
+ $(ECHO) "EXIT CODE: $${testExitCode}"; \
+ exit $${testExitCode}
+
+ifeq ($(TREAT_EXIT_CODE_1_AS_0), true)
+ ADJUST_EXIT_CODE := \
+ if [ $${jtregExitCode} = 1 ] ; then \
+ jtregExitCode=0; \
+ fi
+else
+ # colon is the shell no-op
+ ADJUST_EXIT_CODE := :
+endif
+
+BUNDLE_UP_AND_EXIT = \
+( \
+ jtregExitCode=$$? && \
+ _summary="$(SUMMARY_TXT)"; \
+ $(ADJUST_EXIT_CODE) ; \
+ $(RM) -f $(STATS_TXT) $(RUNLIST) $(PASSLIST) $(FAILLIST) $(EXITCODE); \
+ $(ECHO) "$${jtregExitCode}" > $(EXITCODE); \
+ if [ -r "$${_summary}" ] ; then \
+ $(ECHO) "Summary: $(UNIQUE_DIR)" > $(STATS_TXT); \
+ $(EXPAND) $${_summary} | $(EGREP) -v ' Not run\.' > $(RUNLIST); \
+ $(EGREP) ' Passed\.' $(RUNLIST) \
+ | $(EGREP) -v ' Error\.' \
+ | $(EGREP) -v ' Failed\.' > $(PASSLIST); \
+ ( $(EGREP) ' Failed\.' $(RUNLIST); \
+ $(EGREP) ' Error\.' $(RUNLIST); \
+ $(EGREP) -v ' Passed\.' $(RUNLIST) ) \
+ | $(SORT) | $(UNIQ) > $(FAILLIST); \
+ if [ $${jtregExitCode} != 0 -o -s $(FAILLIST) ] ; then \
+ $(EXPAND) $(FAILLIST) \
+ | $(CUT) -d' ' -f1 \
+ | $(SED) -e 's@^@FAILED: @' >> $(STATS_TXT); \
+ if [ $${jtregExitCode} = 0 ] ; then \
+ jtregExitCode=1; \
+ fi; \
+ fi; \
+ runc="`$(CAT) $(RUNLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \
+ passc="`$(CAT) $(PASSLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \
+ failc="`$(CAT) $(FAILLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \
+ exclc="FIXME CODETOOLS-7900176"; \
+ $(ECHO) "TEST STATS: name=$(UNIQUE_DIR) run=$${runc} pass=$${passc} fail=$${failc}" \
+ >> $(STATS_TXT); \
+ else \
+ $(ECHO) "Missing file: $${_summary}" >> $(STATS_TXT); \
+ fi; \
+ if [ -f $(STATS_TXT) ] ; then \
+ $(CAT) $(STATS_TXT); \
+ fi; \
+ $(ZIP_UP_RESULTS) ; \
+ $(TESTEXIT) \
+)
+
+################################################################
+
+# Prep for output
+# Change execute permissions on shared library files.
+# Files in repositories should never have execute permissions, but
+# there are some tests that have pre-built shared libraries, and these
+# windows dll files must have execute permission. Adding execute
+# permission may happen automatically on windows when using certain
+# versions of mercurial but it cannot be guaranteed. And blindly
+# adding execute permission might be seen as a mercurial 'change', so
+# we avoid adding execute permission to repository files. But testing
+# from a plain source tree needs the chmod a+rx. Applying the chmod to
+# all shared libraries not just dll files. And with CYGWIN and sshd
+# service, you may need CYGWIN=ntsec for this to work.
+prep:
+ @$(MKDIR) -p $(ABS_TEST_OUTPUT_DIR)
+ @$(MKDIR) -p `$(DIRNAME) $(ARCHIVE_BUNDLE)`
+ @if [ ! -d $(TEST_ROOT)/../.hg ] ; then \
+ $(FIND) $(TEST_ROOT) \( -name \*.dll -o -name \*.DLL -o -name \*.so \) \
+ -exec $(CHMOD) a+rx {} \; ; \
+ fi
+
+ifeq ($(CLEAN_BEFORE_PREP), true)
+prep: clean
+
+endif
+
+# Cleanup
+clean:
+ @$(RM) -r $(ABS_TEST_OUTPUT_DIR)
+ @$(RM) $(ARCHIVE_BUNDLE)
+
+################################################################
+
+# jtreg tests
+
+# Expect JT_HOME to be set for jtreg tests. (home for jtreg)
+ifndef JT_HOME
+ JT_HOME = $(SLASH_JAVA)/re/jtreg/$(USE_JTREG_VERSION)/promoted/latest/binaries/jtreg
+ ifdef JPRT_JTREG_HOME
+ JT_HOME = $(JPRT_JTREG_HOME)
+ endif
+endif
+
+# Problematic tests to be excluded
+PROBLEM_LISTS=$(call MixedDirs,$(wildcard ProblemList.txt closed/ProblemList.txt))
+
+# Create exclude list for this platform and arch
+ifdef NO_EXCLUDES
+ JTREG_EXCLUSIONS =
+else
+ JTREG_EXCLUSIONS = $(PROBLEM_LISTS:%=-exclude:%)
+endif
+
+# convert list of directories to dos paths
+define MixedDirs
+$(foreach i,$1,$(shell $(GETMIXEDPATH) "${i}"))
+endef
+
+# ------------------------------------------------------------------
+
+# When called from JPRT the TESTDIRS variable is set to the jtreg tests to run
+ifdef TESTDIRS
+ TEST_SELECTION = $(TESTDIRS)
+endif
+
+ifdef CONCURRENCY
+ JTREG_BASIC_OPTIONS += -concurrency:$(CONCURRENCY)
+endif
+ifdef EXTRA_JTREG_OPTIONS
+ JTREG_BASIC_OPTIONS += $(EXTRA_JTREG_OPTIONS)
+endif
+
+# Default JTREG to run
+JTREG = $(JT_HOME)/bin/jtreg
+# run in agentvm/othervm mode
+JTREG_BASIC_OPTIONS += $(JTREG_VM_TYPE)
+# Only run automatic tests
+JTREG_BASIC_OPTIONS += -a
+# Always turn on assertions
+ifeq ($(USE_JTREG_ASSERT), true)
+ JTREG_ASSERT_OPTION = -ea -esa
+endif
+JTREG_BASIC_OPTIONS += $(JTREG_ASSERT_OPTION)
+# jtreg verbosity setting
+# Default is to report details on all failed or error tests, times too
+JTREG_VERBOSE ?= fail,error,time
+JTREG_BASIC_OPTIONS += $(if $(JTREG_VERBOSE),-v:$(JTREG_VERBOSE))
+# Retain all files for failing tests
+JTREG_BASIC_OPTIONS += -retain:fail,error
+# Ignore tests are not run and completely silent about it
+JTREG_IGNORE_OPTION = -ignore:quiet
+JTREG_BASIC_OPTIONS += $(JTREG_IGNORE_OPTION)
+# Multiply by 4 the timeout factor
+JTREG_TIMEOUT_OPTION = -timeoutFactor:4
+JTREG_BASIC_OPTIONS += $(JTREG_TIMEOUT_OPTION)
+ifeq ($(LIMIT_JTREG_VM_MEMORY), true)
+ # Set the max memory for jtreg control vm
+ JTREG_MEMORY_OPTION = -J-Xmx512m
+ JTREG_BASIC_OPTIONS += $(JTREG_MEMORY_OPTION)
+ # Set the max memory for jtreg target test vms
+ JTREG_TESTVM_MEMORY_OPTION = -vmoption:-Xmx512m
+ JTREG_TEST_OPTIONS += $(JTREG_TESTVM_MEMORY_OPTION)
+endif
+# Give tests access to JT_JAVA, see JDK-8141609
+JTREG_BASIC_OPTIONS += -e:JDK8_HOME=${JT_JAVA}
+# Set other vm and test options
+JTREG_TEST_OPTIONS = $(JAVA_ARGS:%=-javaoptions:%) $(JAVA_OPTIONS:%=-vmoption:%) $(JAVA_VM_ARGS:%=-vmoption:%)
+
+ifeq ($(IGNORE_MARKED_TESTS), true)
+ # Option to tell jtreg to not run tests marked with "ignore"
+ ifeq ($(PLATFORM), windows)
+ JTREG_KEY_OPTION = -k:!ignore
+ else
+ JTREG_KEY_OPTION = -k:\!ignore
+ endif
+ JTREG_BASIC_OPTIONS += $(JTREG_KEY_OPTION)
+endif
+
+# Make sure jtreg exists
+ifeq ($(USE_WINDOWS_EXISTENCE_CHECK), true)
+ jtreg_exists:
+ test -d $(shell $(GETMIXEDPATH) "$(JT_HOME)")
+ test -f $(shell $(GETMIXEDPATH) "$(JTREG)")
+
+else
+ jtreg_exists: $(JT_HOME)
+endif
+PHONY_LIST += jtreg_exists
+
+# Run jtreg
+jtreg_tests: prep jtreg_exists $(PRODUCT_HOME)
+ ( \
+ ( JT_HOME=$(shell $(GETMIXEDPATH) "$(JT_HOME)"); \
+ export JT_HOME; \
+ $(shell $(GETMIXEDPATH) "$(JTREG)") \
+ $(JTREG_BASIC_OPTIONS) \
+ -r:$(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTreport") \
+ -w:$(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTwork") \
+ -jdk:$(shell $(GETMIXEDPATH) "$(PRODUCT_HOME)") \
+ $(JTREG_NATIVE_PATH) \
+ $(JTREG_FAILURE_HANDLER_OPTIONS) \
+ $(JTREG_EXCLUSIONS) \
+ $(JTREG_TEST_OPTIONS) \
+ $(TEST_SELECTION) \
+ ) ; \
+ $(BUNDLE_UP_AND_EXIT) \
+ ) 2>&1 | $(TEE) $(ABS_TEST_OUTPUT_DIR)/output.txt ; $(TESTEXIT)
+
+PHONY_LIST += jtreg_tests
+
+################################################################
+
+# Phony targets (e.g. these are not filenames)
+.PHONY: all clean prep $(PHONY_LIST)
+
+################################################################