<?xml version="1.0" encoding="UTF-8"?>

<!--

DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS HEADER.

Copyright (c) 2014, 2016 Oracle and/or its affiliates. All rights reserved.

Oracle and Java are registered trademarks of Oracle and/or its affiliates.

Other names may be trademarks of their respective owners.

The contents of this file are subject to the terms of either the GNU

General Public License Version 2 only ("GPL") or the Common

Development and Distribution License("CDDL") (collectively, the

"License"). You may not use this file except in compliance with the

License. You can obtain a copy of the License at

http://www.netbeans.org/cddl-gplv2.html

or nbbuild/licenses/CDDL-GPL-2-CP. See the License for the

specific language governing permissions and limitations under the

License.  When distributing the software, include this License Header

Notice in each file and include the License file at

nbbuild/licenses/CDDL-GPL-2-CP.  Oracle designates this

particular file as subject to the "Classpath" exception as provided

by Oracle in the GPL Version 2 section of the License file that

accompanied this code. If applicable, add the following below the

License Header, with the fields enclosed by brackets [] replaced by

your own identifying information:

"Portions Copyrighted [year] [name of copyright owner]"

If you wish your version of this file to be governed by only the CDDL

or only the GPL Version 2, indicate your decision by adding

"[Contributor] elects to include this software in this distribution

under the [CDDL or GPL Version 2] license." If you do not indicate a

single choice of license, a recipient has the option to distribute

your version of this file under either the CDDL, the GPL Version 2 or

to extend the choice of license to its licensees as provided above.

However, if you add GPL Version 2 code and therefore, elected the GPL

Version 2 license, then the option applies only if the new code is

made subject to such option by the copyright holder.

Contributor(s):

-->

<configurationDescriptor version="100">

  <logicalFolder name="root" displayName="root" projectFiles="true" kind="ROOT">

    <df root="." name="0">

      <df name="build">

        <df name="Debug">

          <df name="src">

            <df name="generated-sources">

              <in>DBusAdaptor.cpp</in>

            </df>

            <in>DBusAdaptor.cpp</in>

          </df>

        </df>

        <df name="qt">

          <df name="src">

            <df name="cadMousePro_autogen">

              <in>mocs_compilation.cpp</in>

            </df>

          </df>

        </df>

      </df>

      <df name="src">

        <in>Daemon.h</in>

        <in>cadMousePro.cpp</in>

      </df>

    </df>

    <logicalFolder name="cadMousePro_autogen"

                   displayName="cadMousePro_autogen"

                   projectFiles="true"

                   root="build/Debug/src/cadMousePro_autogen">

      <logicalFolder name="7JU4VIX55Q" displayName="7JU4VIX55Q" projectFiles="true">

        <itemPath>build/Debug/src/cadMousePro_autogen/7JU4VIX55Q/moc_DBusAdaptor.cpp</itemPath>

      </logicalFolder>

      <logicalFolder name="EWIEGA46WW" displayName="EWIEGA46WW" projectFiles="true">

        <itemPath>build/Debug/src/cadMousePro_autogen/EWIEGA46WW/moc_DBusAdaptor.cpp</itemPath>

        <itemPath>build/Debug/src/cadMousePro_autogen/EWIEGA46WW/moc_Daemon.cpp</itemPath>

      </logicalFolder>

      <logicalFolder name="S5VNLJ26FI" displayName="S5VNLJ26FI" projectFiles="true">

        <itemPath>build/Debug/src/cadMousePro_autogen/S5VNLJ26FI/moc_DBusAdaptor.cpp</itemPath>

      </logicalFolder>

      <itemPath>build/Debug/src/cadMousePro_autogen/mocs_compilation.cpp</itemPath>

    </logicalFolder>

    <logicalFolder name="Modules"

                   displayName="Modules"

                   projectFiles="true"

                   root="/usr/share/cmake-3.10/Modules">

      <itemPath>/usr/share/cmake-3.10/Modules/CMakeCXXCompilerABI.cpp</itemPath>

      <itemPath>/usr/share/cmake-3.10/Modules/CMakeCompilerABI.h</itemPath>

    </logicalFolder>

    <logicalFolder name="ExternalFiles"

                   displayName="Important Files"

                   projectFiles="false"

                   kind="IMPORTANT_FILES_FOLDER">

      <itemPath>CMakeLists.txt</itemPath>

      <itemPath>build/Debug/Makefile</itemPath>

      <itemPath>build/Release/Makefile</itemPath>

    </logicalFolder>

  </logicalFolder>

  <sourceFolderFilter>^(nbproject|build)$</sourceFolderFilter>

  <sourceRootList>

    <Elem>.</Elem>

  </sourceRootList>

  <projectmakefile>build/Debug/Makefile</projectmakefile>

  <confs>

    <conf name="Debug" type="0">

      <toolsSet>

        <compilerSet>default</compilerSet>

        <dependencyChecking>false</dependencyChecking>

        <rebuildPropChanged>false</rebuildPropChanged>

      </toolsSet>

      <flagsDictionary>

        <element flagsID="0" commonFlags="-fsanitize=address -fPIC -std=gnu++11"/>

        <element flagsID="1"

                 commonFlags="-mtune=generic -march=x86-64 -std=gnu++11 -fsanitize=address -fPIC -fstack-protector-strong"/>

      </flagsDictionary>

      <codeAssistance>

      </codeAssistance>

      <makefileType>

        <makeTool>

          <buildCommandWorkingDir>build/Debug</buildCommandWorkingDir>

          <buildCommand>${MAKE} -f Makefile</buildCommand>

          <cleanCommand>${MAKE} -f Makefile clean</cleanCommand>

        </makeTool>

        <preBuild>

          <preBuildCommandWorkingDir>build/Debug</preBuildCommandWorkingDir>

          <preBuildCommand>${CMAKE} -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Debug -DCMAKE_C_COMPILER=${IDE_CC} -DCMAKE_CXX_COMPILER=${IDE_CXX} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON ../..</preBuildCommand>

          <preBuildFirst>true</preBuildFirst>

        </preBuild>

      </makefileType>

      <item path="/usr/share/cmake-3.10/Modules/CMakeCXXCompilerABI.cpp"

            ex="false"

            tool="1"

            flavor2="11">

      </item>

      <item path="build/Debug/src/DBusAdaptor.cpp" ex="false" tool="1" flavor2="8">

        <ccTool flags="0">

          <incDir>

            <pElem>build/Debug/src/cadMousePro_autogen/include</pElem>

          </incDir>

        </ccTool>

      </item>

      <item path="build/Debug/src/cadMousePro_autogen/7JU4VIX55Q/moc_DBusAdaptor.cpp"

            ex="true"

            tool="3"

            flavor2="0">

      </item>

      <item path="build/Debug/src/cadMousePro_autogen/EWIEGA46WW/moc_DBusAdaptor.cpp"

            ex="true"

            tool="3"

            flavor2="0">

      </item>

      <item path="build/Debug/src/cadMousePro_autogen/EWIEGA46WW/moc_Daemon.cpp"

            ex="true"

            tool="3"

            flavor2="0">

      </item>

      <item path="build/Debug/src/cadMousePro_autogen/S5VNLJ26FI/moc_DBusAdaptor.cpp"

            ex="true"

            tool="3"

            flavor2="0">

      </item>

      <item path="build/Debug/src/cadMousePro_autogen/mocs_compilation.cpp"

            ex="false"

            tool="1"

            flavor2="8">

        <ccTool flags="0">

        </ccTool>

      </item>

      <item path="build/Debug/src/generated-sources/DBusAdaptor.cpp"

            ex="false"

            tool="1"

            flavor2="8">

        <ccTool flags="0">

        </ccTool>

      </item>

      <item path="build/qt/src/cadMousePro_autogen/mocs_compilation.cpp"

            ex="false"

            tool="1"

            flavor2="8">

        <ccTool flags="1">

        </ccTool>

      </item>

      <folder path="0/build">

        <ccTool>

          <incDir>

            <pElem>/usr/include/hidapi</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtDBus</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtCore</pElem>

            <pElem>/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++</pElem>

          </incDir>

        </ccTool>

      </folder>

      <folder path="0/build/Debug">

        <ccTool>

          <incDir>

            <pElem>build/Debug/src</pElem>

            <pElem>src</pElem>

          </incDir>

          <preprocessorList>

            <Elem>QT_CORE_LIB</Elem>

            <Elem>QT_DBUS_LIB</Elem>

          </preprocessorList>

        </ccTool>

      </folder>

      <folder path="0/build/qt">

        <ccTool>

          <incDir>

            <pElem>src</pElem>

            <pElem>build/qt/src/cadMousePro_autogen/EWIEGA46WW</pElem>

            <pElem>build/qt/src/cadMousePro_autogen</pElem>

            <pElem>build/qt/src</pElem>

          </incDir>

        </ccTool>

      </folder>

      <folder path="0/src">

        <ccTool>

          <incDir>

            <pElem>build/Debug/src</pElem>

            <pElem>src</pElem>

            <pElem>build/Debug/src/cadMousePro_autogen/include</pElem>

            <pElem>/usr/include/hidapi</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtDBus</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtCore</pElem>

            <pElem>/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++</pElem>

          </incDir>

          <preprocessorList>

            <Elem>QT_CORE_LIB</Elem>

            <Elem>QT_DBUS_LIB</Elem>

          </preprocessorList>

        </ccTool>

      </folder>

      <folder path="Modules">

        <ccTool>

          <incDir>

            <pElem>build/Debug/src</pElem>

            <pElem>src</pElem>

            <pElem>build/Debug/src/cadMousePro_autogen/include</pElem>

            <pElem>/usr/include/hidapi</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtDBus</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtCore</pElem>

            <pElem>/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++</pElem>

          </incDir>

          <preprocessorList>

            <Elem>QT_CORE_LIB</Elem>

            <Elem>QT_DBUS_LIB</Elem>

          </preprocessorList>

        </ccTool>

      </folder>

      <folder path="cadMousePro_autogen">

        <ccTool>

          <incDir>

            <pElem>build/Debug/src</pElem>

            <pElem>src</pElem>

            <pElem>build/Debug/src/cadMousePro_autogen/include</pElem>

            <pElem>/usr/include/hidapi</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtDBus</pElem>

            <pElem>/usr/include/x86_64-linux-gnu/qt5/QtCore</pElem>

            <pElem>/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++</pElem>

          </incDir>

          <preprocessorList>

            <Elem>QT_CORE_LIB</Elem>

            <Elem>QT_DBUS_LIB</Elem>

          </preprocessorList>

        </ccTool>

      </folder>

      <item path="src/cadMousePro.cpp" ex="false" tool="1" flavor2="8">

        <ccTool flags="0">

        </ccTool>

      </item>

    </conf>

    <conf name="Release" type="0">

      <toolsSet>

        <compilerSet>default</compilerSet>

        <dependencyChecking>false</dependencyChecking>

        <rebuildPropChanged>false</rebuildPropChanged>

      </toolsSet>

      <flagsDictionary>

        <element flagsID="0" commonFlags="-O3"/>

      </flagsDictionary>

      <codeAssistance>

      </codeAssistance>

      <makefileType>

        <makeTool>

          <buildCommandWorkingDir>build/Release</buildCommandWorkingDir>

          <buildCommand>${MAKE} -f Makefile</buildCommand>

          <cleanCommand>${MAKE} -f Makefile clean</cleanCommand>

          <ccTool>

            <incDir>

              <pElem>build/Release/src</pElem>

            </incDir>

            <preprocessorList>

              <Elem>NDEBUG</Elem>

            </preprocessorList>

          </ccTool>

        </makeTool>

        <preBuild>

          <preBuildCommandWorkingDir>build/Release</preBuildCommandWorkingDir>

          <preBuildCommand>${CMAKE} -G "Unix Makefiles" -DCMAKE_BUILD_TYPE=Release -DCMAKE_C_COMPILER=${IDE_CC} -DCMAKE_CXX_COMPILER=${IDE_CXX} -DCMAKE_EXPORT_COMPILE_COMMANDS=ON ../..</preBuildCommand>

          <preBuildFirst>true</preBuildFirst>

        </preBuild>

      </makefileType>

      <item path="src/Daemon.h" ex="false" tool="3" flavor2="0">

      </item>

      <item path="src/cadMousePro.cpp" ex="false" tool="1" flavor2="0">

        <ccTool flags="0">

        </ccTool>

      </item>

    </conf>

  </confs>

</configurationDescriptor>