/*

 * Copyright (c) 2000, 2014, Oracle and/or its affiliates. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 *

 */

#ifndef SHARE_VM_MEMORY_SHAREDHEAP_HPP

#define SHARE_VM_MEMORY_SHAREDHEAP_HPP

#include "gc_interface/collectedHeap.hpp"

#include "memory/generation.hpp"

// A "SharedHeap" is an implementation of a java heap for HotSpot.  This

// is an abstract class: there may be many different kinds of heaps.  This

// class defines the functions that a heap must implement, and contains

// infrastructure common to all heaps.

class Generation;

class BarrierSet;

class GenRemSet;

class Space;

class SpaceClosure;

class OopClosure;

class OopsInGenClosure;

class ObjectClosure;

class SubTasksDone;

class WorkGang;

class FlexibleWorkGang;

class CollectorPolicy;

class KlassClosure;

// Note on use of FlexibleWorkGang's for GC.

// There are three places where task completion is determined.

// In

//    1) ParallelTaskTerminator::offer_termination() where _n_threads

//    must be set to the correct value so that count of workers that

//    have offered termination will exactly match the number

//    working on the task.  Tasks such as those derived from GCTask

//    use ParallelTaskTerminator's.  Tasks that want load balancing

//    by work stealing use this method to gauge completion.

//    2) SubTasksDone has a variable _n_threads that is used in

//    all_tasks_completed() to determine completion.  all_tasks_complete()

//    counts the number of tasks that have been done and then reset

//    the SubTasksDone so that it can be used again.  When the number of

//    tasks is set to the number of GC workers, then _n_threads must

//    be set to the number of active GC workers. G1RootProcessor and

//    GenCollectedHeap have SubTasksDone.

//    3) SequentialSubTasksDone has an _n_threads that is used in

//    a way similar to SubTasksDone and has the same dependency on the

//    number of active GC workers.  CompactibleFreeListSpace and Space

//    have SequentialSubTasksDone's.

//

// Examples of using SubTasksDone and SequentialSubTasksDone:

//  G1RootProcessor and GenCollectedHeap::process_roots() use

//  SubTasksDone* _process_strong_tasks to claim tasks for workers

//

//  GenCollectedHeap::gen_process_roots() calls

//      rem_set()->younger_refs_iterate()

//  to scan the card table and which eventually calls down into

//  CardTableModRefBS::par_non_clean_card_iterate_work().  This method

//  uses SequentialSubTasksDone* _pst to claim tasks.

//  Both SubTasksDone and SequentialSubTasksDone call their method

//  all_tasks_completed() to count the number of GC workers that have

//  finished their work.  That logic is "when all the workers are

//  finished the tasks are finished".

//

//  The pattern that appears  in the code is to set _n_threads

//  to a value > 1 before a task that you would like executed in parallel

//  and then to set it to 0 after that task has completed.  A value of

//  0 is a "special" value in set_n_threads() which translates to

//  setting _n_threads to 1.

//

//  Some code uses _n_termination to decide if work should be done in

//  parallel.  The notorious possibly_parallel_oops_do() in threads.cpp

//  is an example of such code.  Look for variable "is_par" for other

//  examples.

//

//  The active_workers is not reset to 0 after a parallel phase.  It's

//  value may be used in later phases and in one instance at least

//  (the parallel remark) it has to be used (the parallel remark depends

//  on the partitioning done in the previous parallel scavenge).

class SharedHeap : public CollectedHeap {

  friend class VMStructs;

  friend class VM_GC_Operation;

  friend class VM_CGC_Operation;

protected:

  // There should be only a single instance of "SharedHeap" in a program.

  // This is enforced with the protected constructor below, which will also

  // set the static pointer "_sh" to that instance.

  static SharedHeap* _sh;

  // A gc policy, controls global gc resource issues

  CollectorPolicy *_collector_policy;

  // If we're doing parallel GC, use this gang of threads.

  FlexibleWorkGang* _workers;

  // Full initialization is done in a concrete subtype's "initialize"

  // function.

  SharedHeap(CollectorPolicy* policy_);

  // Returns true if the calling thread holds the heap lock,

  // or the calling thread is a par gc thread and the heap_lock is held

  // by the vm thread doing a gc operation.

  bool heap_lock_held_for_gc();

  // True if the heap_lock is held by the a non-gc thread invoking a gc

  // operation.

  bool _thread_holds_heap_lock_for_gc;

public:

  static SharedHeap* heap() { return _sh; }

  void set_barrier_set(BarrierSet* bs);

  // Does operations required after initialization has been done.

  virtual void post_initialize();

  // Initialization of ("weak") reference processing support

  virtual void ref_processing_init();

  // Iteration functions.

  void oop_iterate(ExtendedOopClosure* cl) = 0;

  // Iterate over all spaces in use in the heap, in an undefined order.

  virtual void space_iterate(SpaceClosure* cl) = 0;

  // A SharedHeap will contain some number of spaces.  This finds the

  // space whose reserved area contains the given address, or else returns

  // NULL.

  virtual Space* space_containing(const void* addr) const = 0;

  bool no_gc_in_progress() { return !is_gc_active(); }

  // Such a call will involve claiming some fine-grained tasks, such as

  // scanning of threads.  To make this process simpler, we provide the

  // "strong_roots_parity()" method.  Collectors that start parallel tasks

  // whose threads invoke "process_strong_roots" must

  // call "change_strong_roots_parity" in sequential code starting such a

  // task.  (This also means that a parallel thread may only call

  // process_strong_roots once.)

  //

  // For calls to process_roots by sequential code, the parity is

  // updated automatically.

  //

  // The idea is that objects representing fine-grained tasks, such as

  // threads, will contain a "parity" field.  A task will is claimed in the

  // current "process_roots" call only if its parity field is the

  // same as the "strong_roots_parity"; task claiming is accomplished by

  // updating the parity field to the strong_roots_parity with a CAS.

  //

  // If the client meats this spec, then strong_roots_parity() will have

  // the following properties:

  //   a) to return a different value than was returned before the last

  //      call to change_strong_roots_parity, and

  //   c) to never return a distinguished value (zero) with which such

  //      task-claiming variables may be initialized, to indicate "never

  //      claimed".

 public:

  // Call these in sequential code around process_roots.

  // strong_roots_prologue calls change_strong_roots_parity, if

  // parallel tasks are enabled.

  class StrongRootsScope : public MarkingCodeBlobClosure::MarkScope {

    SharedHeap*   _sh;

   public:

    StrongRootsScope(SharedHeap* heap, bool activate = true);

  };

 private:

 public:

  FlexibleWorkGang* workers() const { return _workers; }

  // The functions below are helper functions that a subclass of

  // "SharedHeap" can use in the implementation of its virtual

  // functions.

public:

  // Do anything common to GC's.

  virtual void gc_prologue(bool full) = 0;

  virtual void gc_epilogue(bool full) = 0;

  // Sets the number of parallel threads that will be doing tasks

  // (such as process roots) subsequently.

  virtual void set_par_threads(uint t);

};

#endif // SHARE_VM_MEMORY_SHAREDHEAP_HPP