/*

 * Copyright (c) 2007, 2017, Oracle and/or its affiliates. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 */

#include "precompiled.hpp"

#include "memory/allocation.inline.hpp"

#include "opto/connode.hpp"

#include "opto/vectornode.hpp"

//------------------------------VectorNode--------------------------------------

// Return the vector operator for the specified scalar operation

// and vector length.

int VectorNode::opcode(int sopc, BasicType bt) {

  switch (sopc) {

  case Op_AddI:

    switch (bt) {

    case T_BOOLEAN:

    case T_BYTE:      return Op_AddVB;

    case T_CHAR:

    case T_SHORT:     return Op_AddVS;

    case T_INT:       return Op_AddVI;

    default:          ShouldNotReachHere(); return 0;

    }

  case Op_AddL:

    assert(bt == T_LONG, "must be");

    return Op_AddVL;

  case Op_AddF:

    assert(bt == T_FLOAT, "must be");

    return Op_AddVF;

  case Op_AddD:

    assert(bt == T_DOUBLE, "must be");

    return Op_AddVD;

  case Op_SubI:

    switch (bt) {

    case T_BOOLEAN:

    case T_BYTE:   return Op_SubVB;

    case T_CHAR:

    case T_SHORT:  return Op_SubVS;

    case T_INT:    return Op_SubVI;

    default:       ShouldNotReachHere(); return 0;

    }

  case Op_SubL:

    assert(bt == T_LONG, "must be");

    return Op_SubVL;

  case Op_SubF:

    assert(bt == T_FLOAT, "must be");

    return Op_SubVF;

  case Op_SubD:

    assert(bt == T_DOUBLE, "must be");

    return Op_SubVD;

  case Op_MulI:

    switch (bt) {

    case T_BOOLEAN:return 0;

    case T_BYTE:   return Op_MulVB;

    case T_CHAR:

    case T_SHORT:  return Op_MulVS;

    case T_INT:    return Op_MulVI;

    default:       ShouldNotReachHere(); return 0;

    }

  case Op_MulL:

    assert(bt == T_LONG, "must be");

    return Op_MulVL;

  case Op_MulF:

    assert(bt == T_FLOAT, "must be");

    return Op_MulVF;

  case Op_MulD:

    assert(bt == T_DOUBLE, "must be");

    return Op_MulVD;

  case Op_FmaD:

    assert(bt == T_DOUBLE, "must be");

    return Op_FmaVD;

  case Op_FmaF:

    assert(bt == T_FLOAT, "must be");

    return Op_FmaVF;

  case Op_CMoveF:

    assert(bt == T_FLOAT, "must be");

    return Op_CMoveVF;

  case Op_CMoveD:

    assert(bt == T_DOUBLE, "must be");

    return Op_CMoveVD;

  case Op_DivF:

    assert(bt == T_FLOAT, "must be");

    return Op_DivVF;

  case Op_DivD:

    assert(bt == T_DOUBLE, "must be");

    return Op_DivVD;

  case Op_AbsI:

    switch (bt) {

    case T_BOOLEAN:

    case T_CHAR:  return 0; // abs does not make sense for unsigned

    case T_BYTE:  return Op_AbsVB;

    case T_SHORT: return Op_AbsVS;

    case T_INT:   return Op_AbsVI;

    default: ShouldNotReachHere(); return 0;

    }

  case Op_AbsL:

    assert(bt == T_LONG, "must be");

    return Op_AbsVL;

  case Op_AbsF:

    assert(bt == T_FLOAT, "must be");

    return Op_AbsVF;

  case Op_AbsD:

    assert(bt == T_DOUBLE, "must be");

    return Op_AbsVD;

  case Op_NegF:

    assert(bt == T_FLOAT, "must be");

    return Op_NegVF;

  case Op_NegD:

    assert(bt == T_DOUBLE, "must be");

    return Op_NegVD;

  case Op_RoundDoubleMode:

    assert(bt == T_DOUBLE, "must be");

    return Op_RoundDoubleModeV;

  case Op_SqrtF:

    assert(bt == T_FLOAT, "must be");

    return Op_SqrtVF;

  case Op_SqrtD:

    assert(bt == T_DOUBLE, "must be");

    return Op_SqrtVD;

  case Op_PopCountI:

    if (bt == T_INT) {

      return Op_PopCountVI;

    }

    // Unimplemented for subword types since bit count changes

    // depending on size of lane (and sign bit).

    return 0;

  case Op_LShiftI:

    switch (bt) {

    case T_BOOLEAN:

    case T_BYTE:   return Op_LShiftVB;

    case T_CHAR:

    case T_SHORT:  return Op_LShiftVS;

    case T_INT:    return Op_LShiftVI;

      default:       ShouldNotReachHere(); return 0;

    }

  case Op_LShiftL:

    assert(bt == T_LONG, "must be");

    return Op_LShiftVL;

  case Op_RShiftI:

    switch (bt) {

    case T_BOOLEAN:return Op_URShiftVB; // boolean is unsigned value

    case T_CHAR:   return Op_URShiftVS; // char is unsigned value

    case T_BYTE:   return Op_RShiftVB;

    case T_SHORT:  return Op_RShiftVS;

    case T_INT:    return Op_RShiftVI;

    default:       ShouldNotReachHere(); return 0;

    }

  case Op_RShiftL:

    assert(bt == T_LONG, "must be");

    return Op_RShiftVL;

  case Op_URShiftI:

    switch (bt) {

    case T_BOOLEAN:return Op_URShiftVB;

    case T_CHAR:   return Op_URShiftVS;

    case T_BYTE:

    case T_SHORT:  return 0; // Vector logical right shift for signed short

                             // values produces incorrect Java result for

                             // negative data because java code should convert

                             // a short value into int value with sign

                             // extension before a shift.

    case T_INT:    return Op_URShiftVI;

    default:       ShouldNotReachHere(); return 0;

    }

  case Op_URShiftL:

    assert(bt == T_LONG, "must be");

    return Op_URShiftVL;

  case Op_AndI:

  case Op_AndL:

    return Op_AndV;

  case Op_OrI:

  case Op_OrL:

    return Op_OrV;

  case Op_XorI:

  case Op_XorL:

    return Op_XorV;

  case Op_MinF:

    assert(bt == T_FLOAT, "must be");

    return Op_MinV;

  case Op_MinD:

    assert(bt == T_DOUBLE, "must be");

    return Op_MinV;

  case Op_MaxF:

    assert(bt == T_FLOAT, "must be");

    return Op_MaxV;

  case Op_MaxD:

    assert(bt == T_DOUBLE, "must be");

    return Op_MaxV;

  case Op_LoadB:

  case Op_LoadUB:

  case Op_LoadUS:

  case Op_LoadS:

  case Op_LoadI:

  case Op_LoadL:

  case Op_LoadF:

  case Op_LoadD:

    return Op_LoadVector;

  case Op_StoreB:

  case Op_StoreC:

  case Op_StoreI:

  case Op_StoreL:

  case Op_StoreF:

  case Op_StoreD:

    return Op_StoreVector;

  case Op_MulAddS2I:

    return Op_MulAddVS2VI;

  default:

    return 0; // Unimplemented

  }

}

// Also used to check if the code generator

// supports the vector operation.

bool VectorNode::implemented(int opc, uint vlen, BasicType bt) {

  if (is_java_primitive(bt) &&

      (vlen > 1) && is_power_of_2(vlen) &&

      Matcher::vector_size_supported(bt, vlen)) {

    int vopc = VectorNode::opcode(opc, bt);

    return vopc > 0 && Matcher::match_rule_supported_vector(vopc, vlen);

  }

  return false;

}

bool VectorNode::is_type_transition_short_to_int(Node* n) {

  switch (n->Opcode()) {

  case Op_MulAddS2I:

    return true;

  }

  return false;

}

bool VectorNode::is_type_transition_to_int(Node* n) {

  return is_type_transition_short_to_int(n);

}

bool VectorNode::is_muladds2i(Node* n) {

  if (n->Opcode() == Op_MulAddS2I) {

    return true;

  }

  return false;

}

bool VectorNode::is_roundopD(Node *n) {

  if (n->Opcode() == Op_RoundDoubleMode) {

    return true;

  }

  return false;

}

bool VectorNode::is_shift(Node* n) {

  switch (n->Opcode()) {

  case Op_LShiftI:

  case Op_LShiftL:

  case Op_RShiftI:

  case Op_RShiftL:

  case Op_URShiftI:

  case Op_URShiftL:

    return true;

  default:

    return false;

  }

}

// Check if input is loop invariant vector.

bool VectorNode::is_invariant_vector(Node* n) {

  // Only Replicate vector nodes are loop invariant for now.

  switch (n->Opcode()) {

  case Op_ReplicateB:

  case Op_ReplicateS:

  case Op_ReplicateI:

  case Op_ReplicateL:

  case Op_ReplicateF:

  case Op_ReplicateD:

    return true;

  default:

    return false;

  }

}

// [Start, end) half-open range defining which operands are vectors

void VectorNode::vector_operands(Node* n, uint* start, uint* end) {

  switch (n->Opcode()) {

  case Op_LoadB:   case Op_LoadUB:

  case Op_LoadS:   case Op_LoadUS:

  case Op_LoadI:   case Op_LoadL:

  case Op_LoadF:   case Op_LoadD:

  case Op_LoadP:   case Op_LoadN:

    *start = 0;

    *end   = 0; // no vector operands

    break;

  case Op_StoreB:  case Op_StoreC:

  case Op_StoreI:  case Op_StoreL:

  case Op_StoreF:  case Op_StoreD:

  case Op_StoreP:  case Op_StoreN:

    *start = MemNode::ValueIn;

    *end   = MemNode::ValueIn + 1; // 1 vector operand

    break;

  case Op_LShiftI:  case Op_LShiftL:

  case Op_RShiftI:  case Op_RShiftL:

  case Op_URShiftI: case Op_URShiftL:

    *start = 1;

    *end   = 2; // 1 vector operand

    break;

  case Op_AddI: case Op_AddL: case Op_AddF: case Op_AddD:

  case Op_SubI: case Op_SubL: case Op_SubF: case Op_SubD:

  case Op_MulI: case Op_MulL: case Op_MulF: case Op_MulD:

  case Op_DivF: case Op_DivD:

  case Op_AndI: case Op_AndL:

  case Op_OrI:  case Op_OrL:

  case Op_XorI: case Op_XorL:

  case Op_MulAddS2I:

    *start = 1;

    *end   = 3; // 2 vector operands

    break;

  case Op_CMoveI:  case Op_CMoveL:  case Op_CMoveF:  case Op_CMoveD:

    *start = 2;

    *end   = n->req();

    break;

  case Op_FmaD:

  case Op_FmaF:

    *start = 1;

    *end   = 4; // 3 vector operands

    break;

  default:

    *start = 1;

    *end   = n->req(); // default is all operands

  }

}

// Return the vector version of a scalar operation node.

VectorNode* VectorNode::make(int opc, Node* n1, Node* n2, uint vlen, BasicType bt) {

  const TypeVect* vt = TypeVect::make(bt, vlen);

  int vopc = VectorNode::opcode(opc, bt);

  // This method should not be called for unimplemented vectors.

  guarantee(vopc > 0, "Vector for '%s' is not implemented", NodeClassNames[opc]);

  switch (vopc) {

  case Op_AddVB: return new AddVBNode(n1, n2, vt);

  case Op_AddVS: return new AddVSNode(n1, n2, vt);

  case Op_AddVI: return new AddVINode(n1, n2, vt);

  case Op_AddVL: return new AddVLNode(n1, n2, vt);

  case Op_AddVF: return new AddVFNode(n1, n2, vt);

  case Op_AddVD: return new AddVDNode(n1, n2, vt);

  case Op_SubVB: return new SubVBNode(n1, n2, vt);

  case Op_SubVS: return new SubVSNode(n1, n2, vt);

  case Op_SubVI: return new SubVINode(n1, n2, vt);

  case Op_SubVL: return new SubVLNode(n1, n2, vt);

  case Op_SubVF: return new SubVFNode(n1, n2, vt);

  case Op_SubVD: return new SubVDNode(n1, n2, vt);

  case Op_MulVB: return new MulVBNode(n1, n2, vt);

  case Op_MulVS: return new MulVSNode(n1, n2, vt);

  case Op_MulVI: return new MulVINode(n1, n2, vt);

  case Op_MulVL: return new MulVLNode(n1, n2, vt);

  case Op_MulVF: return new MulVFNode(n1, n2, vt);

  case Op_MulVD: return new MulVDNode(n1, n2, vt);

  case Op_DivVF: return new DivVFNode(n1, n2, vt);

  case Op_DivVD: return new DivVDNode(n1, n2, vt);

  case Op_AbsVB: return new AbsVBNode(n1, vt);

  case Op_AbsVS: return new AbsVSNode(n1, vt);

  case Op_AbsVI: return new AbsVINode(n1, vt);

  case Op_AbsVL: return new AbsVLNode(n1, vt);

  case Op_AbsVF: return new AbsVFNode(n1, vt);

  case Op_AbsVD: return new AbsVDNode(n1, vt);

  case Op_NegVF: return new NegVFNode(n1, vt);

  case Op_NegVD: return new NegVDNode(n1, vt);

  case Op_SqrtVF: return new SqrtVFNode(n1, vt);

  case Op_SqrtVD: return new SqrtVDNode(n1, vt);

  case Op_PopCountVI: return new PopCountVINode(n1, vt);

  case Op_LShiftVB: return new LShiftVBNode(n1, n2, vt);

  case Op_LShiftVS: return new LShiftVSNode(n1, n2, vt);

  case Op_LShiftVI: return new LShiftVINode(n1, n2, vt);

  case Op_LShiftVL: return new LShiftVLNode(n1, n2, vt);

  case Op_RShiftVB: return new RShiftVBNode(n1, n2, vt);

  case Op_RShiftVS: return new RShiftVSNode(n1, n2, vt);

  case Op_RShiftVI: return new RShiftVINode(n1, n2, vt);

  case Op_RShiftVL: return new RShiftVLNode(n1, n2, vt);

  case Op_URShiftVB: return new URShiftVBNode(n1, n2, vt);

  case Op_URShiftVS: return new URShiftVSNode(n1, n2, vt);

  case Op_URShiftVI: return new URShiftVINode(n1, n2, vt);

  case Op_URShiftVL: return new URShiftVLNode(n1, n2, vt);

  case Op_AndV: return new AndVNode(n1, n2, vt);

  case Op_OrV:  return new OrVNode (n1, n2, vt);

  case Op_XorV: return new XorVNode(n1, n2, vt);

  case Op_MinV: return new MinVNode(n1, n2, vt);

  case Op_MaxV: return new MaxVNode(n1, n2, vt);

  case Op_RoundDoubleModeV: return new RoundDoubleModeVNode(n1, n2, vt);

  case Op_MulAddVS2VI: return new MulAddVS2VINode(n1, n2, vt);

  default:

    fatal("Missed vector creation for '%s'", NodeClassNames[vopc]);

    return NULL;

  }

}

VectorNode* VectorNode::make(int opc, Node* n1, Node* n2, Node* n3, uint vlen, BasicType bt) {

  const TypeVect* vt = TypeVect::make(bt, vlen);

  int vopc = VectorNode::opcode(opc, bt);

  // This method should not be called for unimplemented vectors.

  guarantee(vopc > 0, "Vector for '%s' is not implemented", NodeClassNames[opc]);

  switch (vopc) {

  case Op_FmaVD: return new FmaVDNode(n1, n2, n3, vt);

  case Op_FmaVF: return new FmaVFNode(n1, n2, n3, vt);

  default:

    fatal("Missed vector creation for '%s'", NodeClassNames[vopc]);

    return NULL;

  }

}

// Scalar promotion

VectorNode* VectorNode::scalar2vector(Node* s, uint vlen, const Type* opd_t) {

  BasicType bt = opd_t->array_element_basic_type();

  const TypeVect* vt = opd_t->singleton() ? TypeVect::make(opd_t, vlen)

                                          : TypeVect::make(bt, vlen);

  switch (bt) {

  case T_BOOLEAN:

  case T_BYTE:

    return new ReplicateBNode(s, vt);

  case T_CHAR:

  case T_SHORT:

    return new ReplicateSNode(s, vt);

  case T_INT:

    return new ReplicateINode(s, vt);

  case T_LONG:

    return new ReplicateLNode(s, vt);

  case T_FLOAT:

    return new ReplicateFNode(s, vt);

  case T_DOUBLE:

    return new ReplicateDNode(s, vt);

  default:

    fatal("Type '%s' is not supported for vectors", type2name(bt));

    return NULL;

  }

}

VectorNode* VectorNode::shift_count(Node* shift, Node* cnt, uint vlen, BasicType bt) {

  assert(VectorNode::is_shift(shift) && !cnt->is_Con(), "only variable shift count");

  // Match shift count type with shift vector type.

  const TypeVect* vt = TypeVect::make(bt, vlen);

  switch (shift->Opcode()) {

  case Op_LShiftI:

  case Op_LShiftL:

    return new LShiftCntVNode(cnt, vt);

  case Op_RShiftI:

  case Op_RShiftL:

  case Op_URShiftI:

  case Op_URShiftL:

    return new RShiftCntVNode(cnt, vt);

  default:

    fatal("Missed vector creation for '%s'", NodeClassNames[shift->Opcode()]);

    return NULL;

  }

}

// Return initial Pack node. Additional operands added with add_opd() calls.

PackNode* PackNode::make(Node* s, uint vlen, BasicType bt) {

  const TypeVect* vt = TypeVect::make(bt, vlen);

  switch (bt) {

  case T_BOOLEAN:

  case T_BYTE: