/*

 * Copyright (c) 2018, Red Hat, Inc. All rights reserved.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 *

 */

#include "precompiled.hpp"

#include "gc/shenandoah/shenandoahFreeSet.hpp"

#include "gc/shenandoah/shenandoahHeap.hpp"

#include "gc/shenandoah/shenandoahHeap.inline.hpp"

#include "gc/shenandoah/shenandoahPacer.hpp"

/*

 * In normal concurrent cycle, we have to pace the application to let GC finish.

 *

 * Here, we do not know how large would be the collection set, and what are the

 * relative performances of the each stage in the concurrent cycle, and so we have to

 * make some assumptions.

 *

 * For concurrent mark, there is no clear notion of progress. The moderately accurate

 * and easy to get metric is the amount of live objects the mark had encountered. But,

 * that does directly correlate with the used heap, because the heap might be fully

 * dead or fully alive. We cannot assume either of the extremes: we would either allow

 * application to run out of memory if we assume heap is fully dead but it is not, and,

 * conversely, we would pacify application excessively if we assume heap is fully alive

 * but it is not. So we need to guesstimate the particular expected value for heap liveness.

 * The best way to do this is apparently recording the past history.

 *

 * For concurrent evac and update-refs, we are walking the heap per-region, and so the

 * notion of progress is clear: we get reported the "used" size from the processed regions

 * and use the global heap-used as the baseline.

 *

 * The allocatable space when GC is running is "free" at the start of cycle, but the

 * accounted budget is based on "used". So, we need to adjust the tax knowing that.

 * Also, since we effectively count the used space three times (mark, evac, update-refs),

 * we need to multiply the tax by 3. Example: for 10 MB free and 90 MB used, GC would

 * come back with 3*90 MB budget, and thus for each 1 MB of allocation, we have to pay

 * 3*90 / 10 MBs. In the end, we would pay back the entire budget.

 */

void ShenandoahPacer::setup_for_mark() {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  size_t live = update_and_get_progress_history();

  size_t free = _heap->free_set()->available();

  size_t non_taxable = free * ShenandoahPacingCycleSlack / 100;

  size_t taxable = free - non_taxable;

  double tax = 1.0 * live / taxable; // base tax for available free space

  tax *= 3;                          // mark is phase 1 of 3, claim 1/3 of free for it

  tax *= ShenandoahPacingSurcharge;  // additional surcharge to help unclutter heap

  restart_with(non_taxable, tax);

  log_info(gc, ergo)("Pacer for Mark. Expected Live: " SIZE_FORMAT "M, Free: " SIZE_FORMAT

                     "M, Non-Taxable: " SIZE_FORMAT "M, Alloc Tax Rate: %.1fx",

                     live / M, free / M, non_taxable / M, tax);

}

void ShenandoahPacer::setup_for_evac() {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  size_t used = _heap->collection_set()->used();

  size_t free = _heap->free_set()->available();

  size_t non_taxable = free * ShenandoahPacingCycleSlack / 100;

  size_t taxable = free - non_taxable;

  double tax = 1.0 * used / taxable; // base tax for available free space

  tax *= 2;                          // evac is phase 2 of 3, claim 1/2 of remaining free

  tax = MAX2<double>(1, tax);        // never allocate more than GC processes during the phase

  tax *= ShenandoahPacingSurcharge;  // additional surcharge to help unclutter heap

  restart_with(non_taxable, tax);

  log_info(gc, ergo)("Pacer for Evacuation. Used CSet: " SIZE_FORMAT "M, Free: " SIZE_FORMAT

                     "M, Non-Taxable: " SIZE_FORMAT "M, Alloc Tax Rate: %.1fx",

                     used / M, free / M, non_taxable / M, tax);

}

void ShenandoahPacer::setup_for_updaterefs() {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  size_t used = _heap->used();

  size_t free = _heap->free_set()->available();

  size_t non_taxable = free * ShenandoahPacingCycleSlack / 100;

  size_t taxable = free - non_taxable;

  double tax = 1.0 * used / taxable; // base tax for available free space

  tax *= 1;                          // update-refs is phase 3 of 3, claim the remaining free

  tax = MAX2<double>(1, tax);        // never allocate more than GC processes during the phase

  tax *= ShenandoahPacingSurcharge;  // additional surcharge to help unclutter heap

  restart_with(non_taxable, tax);

  log_info(gc, ergo)("Pacer for Update Refs. Used: " SIZE_FORMAT "M, Free: " SIZE_FORMAT

                     "M, Non-Taxable: " SIZE_FORMAT "M, Alloc Tax Rate: %.1fx",

                     used / M, free / M, non_taxable / M, tax);

}

/*

 * Traversal walks the entire heap once, and therefore we have to make assumptions about its

 * liveness, like concurrent mark does.

 */

void ShenandoahPacer::setup_for_traversal() {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  size_t live = update_and_get_progress_history();

  size_t free = _heap->free_set()->available();

  size_t non_taxable = free * ShenandoahPacingCycleSlack / 100;

  size_t taxable = free - non_taxable;

  double tax = 1.0 * live / taxable; // base tax for available free space

  tax *= ShenandoahPacingSurcharge;  // additional surcharge to help unclutter heap

  restart_with(non_taxable, tax);

  log_info(gc, ergo)("Pacer for Traversal. Expected Live: " SIZE_FORMAT "M, Free: " SIZE_FORMAT

                     "M, Non-Taxable: " SIZE_FORMAT "M, Alloc Tax Rate: %.1fx",

                     live / M, free / M, non_taxable / M, tax);

}

/*

 * In idle phase, we have to pace the application to let control thread react with GC start.

 *

 * Here, we have rendezvous with concurrent thread that adds up the budget as it acknowledges

 * it had seen recent allocations. It will naturally pace the allocations if control thread is

 * not catching up. To bootstrap this feedback cycle, we need to start with some initial budget

 * for applications to allocate at.

 */

void ShenandoahPacer::setup_for_idle() {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  size_t initial = _heap->capacity() * ShenandoahPacingIdleSlack / 100;

  double tax = 1;

  restart_with(initial, tax);

  log_info(gc, ergo)("Pacer for Idle. Initial: " SIZE_FORMAT "M, Alloc Tax Rate: %.1fx",

                     initial / M, tax);

}

size_t ShenandoahPacer::update_and_get_progress_history() {

  if (_progress == -1) {

    // First initialization, report some prior

    Atomic::store((intptr_t)PACING_PROGRESS_ZERO, &_progress);

    return (size_t) (_heap->capacity() * 0.1);

  } else {

    // Record history, and reply historical data

    _progress_history->add(_progress);

    Atomic::store((intptr_t)PACING_PROGRESS_ZERO, &_progress);

    return (size_t) (_progress_history->avg() * HeapWordSize);

  }

}

void ShenandoahPacer::restart_with(size_t non_taxable_bytes, double tax_rate) {

  size_t initial = (size_t)(non_taxable_bytes * tax_rate) >> LogHeapWordSize;

  STATIC_ASSERT(sizeof(size_t) <= sizeof(intptr_t));

  Atomic::xchg((intptr_t)initial, &_budget);

  Atomic::store(tax_rate, &_tax_rate);

  Atomic::inc(&_epoch);

}

bool ShenandoahPacer::claim_for_alloc(size_t words, bool force) {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  intptr_t tax = MAX2<intptr_t>(1, words * Atomic::load(&_tax_rate));

  intptr_t cur = 0;

  intptr_t new_val = 0;

  do {

    cur = Atomic::load(&_budget);

    if (cur < tax && !force) {

      // Progress depleted, alas.

      return false;

    }

    new_val = cur - tax;

  } while (Atomic::cmpxchg(new_val, &_budget, cur) != cur);

  return true;

}

void ShenandoahPacer::unpace_for_alloc(intptr_t epoch, size_t words) {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  if (_epoch != epoch) {

    // Stale ticket, no need to unpace.

    return;

  }

  intptr_t tax = MAX2<intptr_t>(1, words * Atomic::load(&_tax_rate));

  Atomic::add(tax, &_budget);

}

intptr_t ShenandoahPacer::epoch() {

  return Atomic::load(&_epoch);

}

void ShenandoahPacer::pace_for_alloc(size_t words) {

  assert(ShenandoahPacing, "Only be here when pacing is enabled");

  // Fast path: try to allocate right away

  if (claim_for_alloc(words, false)) {

    return;

  }

  size_t max = ShenandoahPacingMaxDelay;

  double start = os::elapsedTime();

  size_t total = 0;

  size_t cur = 0;

  while (true) {

    // We could instead assist GC, but this would suffice for now.

    // This code should also participate in safepointing.

    // Perform the exponential backoff, limited by max.

    cur = cur * 2;

    if (total + cur > max) {

      cur = (max > total) ? (max - total) : 0;

    }

    cur = MAX2<size_t>(1, cur);

    os::sleep(Thread::current(), cur, true);

    double end = os::elapsedTime();

    total = (size_t)((end - start) * 1000);

    if (total > max) {

      // Spent local time budget to wait for enough GC progress.

      // Breaking out and allocating anyway, which may mean we outpace GC,

      // and start Degenerated GC cycle.

      _delays.add(total);

      // Forcefully claim the budget: it may go negative at this point, and

      // GC should replenish for this and subsequent allocations

      claim_for_alloc(words, true);

      break;

    }

    if (claim_for_alloc(words, false)) {

      // Acquired enough permit, nice. Can allocate now.

      _delays.add(total);

      break;

    }

  }

}

void ShenandoahPacer::print_on(outputStream* out) const {

  out->print_cr("ALLOCATION PACING:");

  out->cr();

  out->print_cr("Max pacing delay is set for " UINTX_FORMAT " ms.", ShenandoahPacingMaxDelay);

  out->cr();

  out->print_cr("Higher delay would prevent application outpacing the GC, but it will hide the GC latencies");

  out->print_cr("from the STW pause times. Pacing affects the individual threads, and so it would also be");

  out->print_cr("invisible to the usual profiling tools, but would add up to end-to-end application latency.");

  out->print_cr("Raise max pacing delay with care.");

  out->cr();

  out->print_cr("Actual pacing delays histogram:");

  out->cr();

  out->print_cr("%10s - %10s  %12s%12s", "From", "To", "Count", "Sum");

  size_t total_count = 0;

  size_t total_sum = 0;

  for (int c = _delays.min_level(); c <= _delays.max_level(); c++) {

    int l = (c == 0) ? 0 : 1 << (c - 1);

    int r = 1 << c;

    size_t count = _delays.level(c);

    size_t sum   = count * (r - l) / 2;

    total_count += count;

    total_sum   += sum;

    out->print_cr("%7d ms - %7d ms: " SIZE_FORMAT_W(12) SIZE_FORMAT_W(12) " ms", l, r, count, sum);

  }

  out->print_cr("%23s: " SIZE_FORMAT_W(12) SIZE_FORMAT_W(12) " ms", "Total", total_count, total_sum);

  out->cr();

}