#

# Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

#

# Common variables used by all the Java makefiles.  This file should

# not contain rules.

#

# WARNING: This file is shared with other workspaces.

#          So when it includes other files, it must use JDK_TOPDIR.

#

# Check for strange explicit settings (change to empty or true)

ifdef OPENJDK

  ifneq ($(OPENJDK),true)

    x:=$(error "OPENJDK (if defined) can only be set to true")

  endif

endif

#

# On Solaris, the 'make' utility from Sun will not work with these makefiles.

#    This little rule is only understood by Sun's make, and is harmless

#    when seen by the GNU make tool. If using Sun's make, this causes the

#    make command to fail.

#

SUN_MAKE_TEST:sh = echo "ERROR: PLEASE USE GNU VERSION OF MAKE"; exit 33

include $(SPEC)

include $(JDK_MAKE_SHARED_DIR)/Platform.gmk

# Historically PLATFORM_SRC used to be src/$(PLATFORM), but we switched it to

# src/solaris so if you want to build on Linux you didn't need a src/linux

# directory.  In an ideal world it would be called src/genunix but we are not

# there yet.

#

ifndef SHARE_SRC

  SHARE_SRC    = $(BUILDDIR)/../src/share

endif

# Files that cannot be included in the OpenJDK distribution are

# collected under a parent directory which contains just those files.

ifndef CLOSED_SRC

  CLOSED_SRC  = $(BUILDDIR)/../src/closed

endif

# If CLOSE_SRC_INCLUDED isn't set to true, check if there's any

# closed directory.

ifneq ($(CLOSED_SRC_INCLUDED), true)

  CLOSED_SRC_INCLUDED := $(shell \

    if [ -d $(CLOSED_SRC) ] ; then \

      echo true; \

    else \

      echo false; \

    fi)

endif

# Set OPENJDK based on CLOSED_SRC_INCLUDED

ifeq ($(CLOSED_SRC_INCLUDED), false)

  OPENJDK = true

endif

# Define where closed directories are

ifdef OPENJDK

  CLOSED_SRC =

  CLOSED_SHARE_SRC =

else

  ifndef CLOSED_SHARE_SRC

    CLOSED_SHARE_SRC    = $(CLOSED_SRC)/share

  endif

endif

#

# Get platform definitions

#

include $(JDK_TOPDIR)/makefiles/common/Defs-$(PLATFORM).gmk

#

# SE-Embedded support, if enabled

#

include $(JDK_TOPDIR)/makefiles/common/Defs-embedded.gmk

#

# Cross-compilation Settings

#

ifdef CROSS_COMPILE_ARCH

  # Can't run the tools we just built

  USE_ONLY_BOOTDIR_TOOLS = true

  # When cross-compiling CC generates code for the target, but

  # some parts of the build generate C code that has to be compiled

  # and executed on the build host - HOST_CC is the 'local' compiler.

  # For linux the default is /usr/bin/gcc; other platforms need to

  # set it explicitly

  ifeq ($(PLATFORM), linux)

    ifndef HOST_CC

      HOST_CC = $(USRBIN_PATH)gcc

    endif

  endif

else

  # Must set HOST_CC if not already set

  ifndef HOST_CC

    HOST_CC = $(CC)

  endif

endif

# Reset the VM name for client-only builds

ifeq ($(JVM_VARIANT),client)

  VM_NAME = client

endif

#

# Freetype logic is applicable to OpenJDK only

#

ifdef OPENJDK

ifeq ($(PLATFORM), windows)

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/win32/freetype-$(ARCH)

endif

ifeq ($(PLATFORM), linux)

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(PLATFORM)/freetype-$(ARCH)

endif

ifeq ($(PLATFORM), solaris)

  # historically for Solaris we have slightly different devtools 

  # naming conventions

  DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(ARCH_FAMILY)/freetype-$(ARCH)

endif

DEVTOOLS_FT_DIR_EXISTS = $(shell \

  if [ -f $(DEVTOOLS_FT_DIR)/include/ft2build.h ] ; then \

    echo true; \

  else \

    echo false; \

  fi)

  ifdef ALT_FREETYPE_LIB_PATH

    FREETYPE_LIB_PATH = $(ALT_FREETYPE_LIB_PATH)

    ifeq ($(PLATFORM), macosx)

      USING_SYSTEM_FT_LIB=true

    endif

  else

    ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)

      FREETYPE_LIB_PATH = $(DEVTOOLS_FT_DIR)/lib

    else

      ifeq ($(PLATFORM), macosx)

        FREETYPE_LIB_PATH = /usr/X11R6/lib

      else

        FREETYPE_LIB_PATH = /usr/lib

      endif

      USING_SYSTEM_FT_LIB=true

    endif

  endif 

  ifdef ALT_FREETYPE_HEADERS_PATH

    FREETYPE_HEADERS_PATH = $(ALT_FREETYPE_HEADERS_PATH)

  else

    ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)

      FREETYPE_HEADERS_PATH = $(DEVTOOLS_FT_DIR)/include

    else

      ifeq ($(PLATFORM), macosx)

        FREETYPE_HEADERS_PATH = /usr/X11R6/include

      else

        FREETYPE_HEADERS_PATH = /usr/include

      endif

    endif

  endif

endif

#

# zlib version

#

ZLIB_VERSION = 1.2.5

#

# Localizations for the different parts of the product beyond English

#

JRE_LOCALES   = de es fr it ja ko pt_BR sv zh_CN zh_TW zh_HK

PLUGIN_LOCALES = de es fr it ja ko pt_BR sv zh_CN zh_TW zh_HK

JDK_LOCALES  = ja zh_CN

#

# A list of locales we support but don't have resource files.

# This is defined to optimize the search of resource bundles.

#

JRE_NONEXIST_LOCALES = en en_US de_DE es_ES fr_FR it_IT ja_JP ko_KR sv_SE zh

#

# For now, most libraries except libjava and libjvm itself link against libjvm

# and libjava, the latter for its exported common utilities. libjava only

# links against libjvm. Programs' makefiles take their own responsibility for

# adding other libs.

#

# The makefiles for these packages do not link against libjvm and libjava.

# This list will eventually go away and each Programs' makefiles

# will have to explicitly declare that they want to link to libjava/libjvm

#

NO_JAVALIB_PKGS = \

		sun.security.mscapi \

		sun.security.krb5 \

		sun.security.pkcs11 \

		sun.security.jgss \

		sun.security.jgss.wrapper \

		sun.security.ec \

		sun.security.smartcardio \

		com.sun.security.auth.module

ifdef PACKAGE

# put JAVALIB first, but do not lose any platform specific values....

  ifeq (,$(findstring $(PACKAGE),$(NO_JAVALIB_PKGS)))

    LDLIBS_COMMON = $(JAVALIB)

  endif

endif # PACKAGE

#

# Libraries that must appear ahead of libc.so on the link command line

#

ifdef PROGRAM

  ifeq ($(PLATFORM), solaris)

    LDLIBS_COMMON = -lthread -ldl

  endif

  ifeq ($(PLATFORM), linux)

    LDLIBS_COMMON = -ldl

  endif

  ifeq ($(PLATFORM), macosx)

    LDLIBS_COMMON = -pthread

  endif

endif # PROGRAM

LDLIBS_COMMON += $(EXTRA_LIBS)

# for generated binaries

BINDIR              = $(OUTPUTDIR)/bin$(ISA_DIR)

# for generated libraries

LIBDIR              = $(OUTPUTDIR)/lib

ABS_LIBDIR          = $(ABS_OUTPUTDIR)/lib

# Optional place to save the windows .lib files

LIBFILES_DIR        = $(OUTPUTDIR)/libfiles

# for ext jre files

EXTDIR              = $(LIBDIR)/ext

# for generated include files

INCLUDEDIR          = $(OUTPUTDIR)/include

# for generated class files

CLASSBINDIR         = $(OUTPUTDIR)/classes

DEMOCLASSDIR        = $(OUTPUTDIR)/democlasses

# for generated tool class files

BUILDTOOLCLASSDIR   = $(OUTPUTDIR)/btclasses

# for build tool jar files

BUILDTOOLJARDIR     = $(OUTPUTDIR)/btjars

ABS_BUILDTOOLJARDIR = $(ABS_OUTPUTDIR)/btjars

# for generated tool class files

BUILDTOOLBINDIR     = $(OUTPUTDIR)/btbins

# for generated java source files

GENSRCDIR           = $(OUTPUTDIR)/gensrc

# for generated C source files (not javah)

GENNATIVESRCDIR     = $(OUTPUTDIR)/gennativesrc

# for imported source files

IMPORTSRCDIR        = $(OUTPUTDIR)/impsrc

# for imported documents

IMPORTDOCDIR        = $(OUTPUTDIR)/impdoc

# for generated demo

DEMODIR             = $(OUTPUTDIR)/demo

NEWDEMODIR	    = $(OUTPUTDIR)/newdemo

# for sample code

SAMPLEDIR           = $(OUTPUTDIR)/sample

# for generated documentation

DOCSDIR             = $(OUTPUTDIR)/docs$(DOCSDIRSUFFIX)

DOCSDIRSUFFIX       =

# The MESSAGE, WARNING and ERROR files are used to store sanityck and 

# warnings and errors. 

ifndef ERROR_FILE

  ERROR_FILE   = $(OUTPUTDIR)/sanityCheckErrors.txt

endif

ifndef WARNING_FILE

  WARNING_FILE = $(OUTPUTDIR)/sanityCheckWarnings.txt

endif

ifndef MESSAGE_FILE

  MESSAGE_FILE = $(OUTPUTDIR)/sanityCheckMessages.txt

endif

#where the demo source can be found

DEMOSRCDIR          = $(SHARE_SRC)/demo

#where the sample source can be found

SAMPLESRCDIR          = $(SHARE_SRC)/sample

# An attempt is made to generate unique enough directories for the

# generated files to not have name collisisons. Most build units

# defines PRODUCT (except Release.gmk), but then they may or may 

# not define PACKAGE, PROGRAM, and LIBRARY. This code attempts to

# generate a unique OBJDIR/CLASSHDRDIR for each build unit based

# on which of those values are set within each build unit.

UNIQUE_LOCATION_STRING = tmp

ifneq ($(PRODUCT),)

  UNIQUE_LOCATION_STRING += /$(PRODUCT)

endif

ifneq ($(PACKAGE),)

  UNIQUE_LOCATION_STRING += /$(PACKAGE)

endif

ifneq ($(PROGRAM),)

  UNIQUE_LOCATION_STRING += /$(PROGRAM)

endif

ifneq ($(LIBRARY),)

  ifneq ($(LIBRARY_OUTPUT),)

    UNIQUE_LOCATION_STRING += /$(LIBRARY_OUTPUT)

  else

    UNIQUE_LOCATION_STRING += /$(LIBRARY)

  endif

endif

# the use of += above makes a space separated list which we need to 

# remove for filespecs.

#

NULLSTRING :=

ONESPACE := $(NULLSTRING) # space before this comment is required.

UNIQUE_PATH = $(subst $(ONESPACE),,$(UNIQUE_LOCATION_STRING))

# TEMPDIR is a unique general purpose directory

# need to use 'override' because GNU Make on Linux exports the wrong

# value.

TEMPDIR      ?= $(OUTPUTDIR)/$(UNIQUE_PATH)

ABS_TEMPDIR  ?= $(ABS_OUTPUTDIR)/$(UNIQUE_PATH)

# This must be created right away for pattern rules in Sanity.gmk to work.

dummy1:=$(shell $(MKDIR) -p $(TEMPDIR))

dummy2:=$(shell $(MKDIR) -p $(TEMP_DISK))

# OBJDIRNAME is the name of the directory where the object code is to

#   be placed. It's name depends on whether the data model architecture 

#   is 32-bit or not.

ifneq ($(ARCH_DATA_MODEL), 32)

  OBJDIRNAME  = obj$(ARCH_DATA_MODEL)$(OBJDIRNAME_SUFFIX)

else

  OBJDIRNAME  = obj$(OBJDIRNAME_SUFFIX)

endif

OBJDIR      = $(TEMPDIR)/$(OBJDIRNAME)

# CLASSHDRDIR is where the generated C Class Header files go.

CLASSHDRDIR = $(TEMPDIR)/CClassHeaders

#

# CLASSDESTDIR can be used to specify the directory where generated classes

# are to be placed. The default is CLASSBINDIR.

#

ifndef CLASSDESTDIR

CLASSDESTDIR = $(CLASSBINDIR)

endif

INCLUDES = -I. -I$(CLASSHDRDIR) \

	$(patsubst %,-I%,$(subst $(CLASSPATH_SEPARATOR), ,$(VPATH.h))) $(OTHER_INCLUDES)

OTHER_CPPFLAGS += $(INCLUDES)

#

# vpaths.  These are the default locations searched for source files.

# GNUmakefiles of individual areas often override the default settings.

# There are no longer default vpath entries for C and assembler files

# so we can ensure that libraries don't get their hands on JVM files.

#

# We define an intermediate variable for Java files because

# we use its value later to help define $SOURCEPATH

ifeq ($(PLATFORM), macosx)

  VPATH0.java = $(subst $(ONESPACE),:,$(GENSRCDIR) $(call JavaSrcDirList,,classes))

else

  VPATH0.java = $(GENSRCDIR)$(CLASSPATH_SEPARATOR)$(PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/classes

endif

ifdef OPENJDK

  VPATH.java = $(VPATH0.java)

else

  #

  # If filenames are duplicated between open/closed workspaces, prefer

  # the closed files.

  #

  # Source ordering is important: some targets depend on closed files

  # replacing open ones, and thus the closed file sources must be found

  # before the open ones.

  #

  # Don't reorder without consulting the teams that depend on this behavior.

  #

  VPATH.java = $(CLOSED_PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(CLOSED_SHARE_SRC)/classes$(CLASSPATH_SEPARATOR)$(VPATH0.java)

endif

vpath %.java $(VPATH.java)

vpath %.class $(CLASSBINDIR)

vpath %.$(OBJECT_SUFFIX) $(OBJDIR)

#

# VPATH.h is used elsewhere to generate include flags.  By default, 

# anyone has access to the include files that the JVM area exports,

# namely jni.h, jvm.h, and jni_utils.h, plus their platform-specific

# relatives.

#

VPATH0.h =   $(PLATFORM_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/javavm/export

ifdef OPENJDK

  VPATH.h = $(VPATH0.h)

else

  VPATH.h = $(CLOSED_SHARE_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(VPATH0.h)

endif

vpath %.h   $(VPATH.h)

#

# Used in two ways: helps link against libjava.so. Also if overridden

# determines where your shared library is installed.

#

ifndef LIB_LOCATION

  LIB_LOCATION    =  $(LIBDIR)/$(LIBARCH)

endif

#

# Java header and stub variables

#

CLASSHDRS     = $(patsubst %,$(CLASSHDRDIR)/%.h,$(subst .,_,$(CLASSES.export)))

CLASSSTUBOBJS = classstubs.$(OBJECT_SUFFIX)

STUBPREAMBLE  = $(INCLUDEDIR)/StubPreamble.h

#

# Classpath seen by javac (different from the one seen by the VM

# running javac), and useful variables.

#

SOURCEPATH	= $(VPATH.java)

PKG		= $(shell $(EXPR) $(PACKAGE) : '\([a-z]*\)')

PKGDIR		= $(subst .,/,$(PACKAGE))

#

# The java/javac/jdk variables (JAVAC_CMD, JAVA_CMD, etc.)

#

include $(JDK_MAKE_SHARED_DIR)/Defs-java.gmk

UNIQUE_PATH_PATTERN = $(subst /,.,$(UNIQUE_PATH))

# Run MAKE $@ for a launcher:

#   $(call make-launcher, name, mainclass, java-args, main-args)

define make-launcher

$(CD) $(BUILDDIR)/launchers && \

$(MAKE) -f Makefile.launcher \

        PROGRAM=$(strip $1) \

        MAIN_CLASS=$(strip $2) \

        MAIN_JAVA_ARGS="$(strip $3)" \

        MAIN_ARGS="$(strip $4)"

endef

#

# Convenient macros

#

# Prepare $@ target, remove old one and making sure directory exists

define prep-target

mkdir -p $(@D)

rm -f $@

endef

# Simple install of $< file to $@

define install-file

$(prep-target)

$(CP) $< $@

endef

define chmod-file

$(CHMOD) $1 $@

endef

define install-sym-link

$(LN) -s $1 $@

endef

define install-manifest-file

$(install-file)

endef

# Cleanup rule for after debug java run (hotspot.log file is left around)

#   (This could be an old leftover file in a read-only area, use the @- prefix)

HOTSPOT_LOG_NAME = hotspot.log

define java-vm-cleanup

if [ -w $(HOTSPOT_LOG_NAME) ] ; then rm -f $(HOTSPOT_LOG_NAME); fi

endef

# Current directory

CURRENT_DIRECTORY := $(shell $(PWD))

#

# Create BYFILE OPT and DBG settings, if CFLAGS_OPT/foobar.o is set then it is

#    used for this file, otherwise the default settings are used.

#

CFLAGS_$(VARIANT)/BYFILE    = $(CFLAGS_$(VARIANT)/$(@F)) \

                              $(CFLAGS_$(VARIANT)$(CFLAGS_$(VARIANT)/$(@F)))

CXXFLAGS_$(VARIANT)/BYFILE  = $(CXXFLAGS_$(VARIANT)/$(@F)) \

                              $(CXXFLAGS_$(VARIANT)$(CXXFLAGS_$(VARIANT)/$(@F)))

#

# Tool flags

#

# EXTRA_CFLAGS are used to define cross-compilation options

#

ASFLAGS         = $(ASFLAGS_$(VARIANT)) $(ASFLAGS_COMMON) $(OTHER_ASFLAGS)

CFLAGS          = $(CFLAGS_$(VARIANT)/BYFILE)   $(CFLAGS_COMMON) $(OTHER_CFLAGS) $(EXTRA_CFLAGS)