/*

 * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.  Oracle designates this

 * particular file as subject to the "Classpath" exception as provided

 * by Oracle in the LICENSE file that accompanied this code.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 */

/*

 * This file is available under and governed by the GNU General Public

 * License version 2 only, as published by the Free Software Foundation.

 * However, the following notice accompanied the original version of this

 * file:

 *

 * Copyright (c) 2012, Stephen Colebourne & Michael Nascimento Santos

 *

 * All rights reserved.

 *

 * Redistribution and use in source and binary forms, with or without

 * modification, are permitted provided that the following conditions are met:

 *

 *  * Redistributions of source code must retain the above copyright notice,

 *    this list of conditions and the following disclaimer.

 *

 *  * Redistributions in binary form must reproduce the above copyright notice,

 *    this list of conditions and the following disclaimer in the documentation

 *    and/or other materials provided with the distribution.

 *

 *  * Neither the name of JSR-310 nor the names of its contributors

 *    may be used to endorse or promote products derived from this software

 *    without specific prior written permission.

 *

 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS

 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR

 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR

 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 */

package java.time.temporal;

import java.time.DateTimeException;

import java.time.ZoneId;

/**

 * Framework-level interface defining read-only access to a temporal object,

 * such as a date, time, offset or some combination of these.

 * <p>

 * This is the base interface type for date, time and offset objects.

 * It is implemented by those classes that can provide information

 * as {@linkplain TemporalField fields} or {@linkplain TemporalQuery queries}.

 * <p>

 * Most date and time information can be represented as a number.

 * These are modeled using {@code TemporalField} with the number held using

 * a {@code long} to handle large values. Year, month and day-of-month are

 * simple examples of fields, but they also include instant and offsets.

 * See {@link ChronoField} for the standard set of fields.

 * <p>

 * Two pieces of date/time information cannot be represented by numbers,

 * the {@linkplain java.time.chrono.Chronology chronology} and the {@linkplain ZoneId time-zone}.

 * <p>

 * A sub-interface, {@link Temporal}, extends this definition to one that also

 * supports adjustment and manipulation on more complete temporal objects.

 * <p>

 * This interface is a framework-level interface that should not be widely

 * used in application code. Instead, applications should create and pass

 * around instances of concrete types, such as {@code LocalDate}.

 * There are many reasons for this, part of which is that implementations

 * of this interface may be in calendar systems other than ISO.

 * See {@link java.time.chrono.ChronoLocalDate} for a fuller discussion of the issues.

 *

 * <h3>Specification for implementors</h3>

 * This interface places no restrictions on the mutability of implementations,

 * however immutability is strongly recommended.

 *

 * @since 1.8

 */

public interface TemporalAccessor {

    /**

     * Checks if the specified field is supported.

     * <p>

     * This checks if the date-time can be queried for the specified field.

     * If false, then calling the {@link #range(TemporalField) range} and {@link #get(TemporalField) get}

     * methods will throw an exception.

     *

     * <h3>Specification for implementors</h3>

     * Implementations must check and handle all fields defined in {@link ChronoField}.

     * If the field is supported, then true is returned, otherwise false

     * <p>

     * If the field is not a {@code ChronoField}, then the result of this method

     * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)}

     * passing {@code this} as the argument.

     * <p>

     * Implementations must not alter either this object.

     *

     * @param field  the field to check, null returns false

     * @return true if this date-time can be queried for the field, false if not

     */

    boolean isSupported(TemporalField field);

    /**

     * Gets the range of valid values for the specified field.

     * <p>

     * All fields can be expressed as a {@code long} integer.

     * This method returns an object that describes the valid range for that value.

     * The value of this temporal object is used to enhance the accuracy of the returned range.

     * If the date-time cannot return the range, because the field is unsupported or for

     * some other reason, an exception will be thrown.

     * <p>

     * Note that the result only describes the minimum and maximum valid values

     * and it is important not to read too much into them. For example, there

     * could be values within the range that are invalid for the field.

     *

     * <h3>Specification for implementors</h3>

     * Implementations must check and handle all fields defined in {@link ChronoField}.

     * If the field is supported, then the range of the field must be returned.

     * <p>

     * If the field is not a {@code ChronoField}, then the result of this method

     * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessorl)}

     * passing {@code this} as the argument.

     * <p>

     * Implementations must not alter either this object.

     * <p>

     * The default implementation must behave equivalent to this code:

     * <pre>

     *  if (field instanceof ChronoField) {

     *    if (isSupported(field)) {

     *      return field.range();

     *    }

     *  }

     *  return field.rangeRefinedBy(this);

     * </pre>

     *

     * @param field  the field to query the range for, not null

     * @return the range of valid values for the field, not null

     * @throws DateTimeException if the range for the field cannot be obtained

     */

        if (field instanceof ChronoField) {

            if (isSupported(field)) {

                return field.range();

            }

        }

        return field.rangeRefinedBy(this);

    }

    /**

     * Gets the value of the specified field as an {@code int}.

     * <p>

     * This queries the date-time for the value for the specified field.

     * The returned value will always be within the valid range of values for the field.

     * If the date-time cannot return the value, because the field is unsupported or for

     * some other reason, an exception will be thrown.

     *

     * <h3>Specification for implementors</h3>

     * Implementations must check and handle all fields defined in {@link ChronoField}.

     * If the field is supported and has an {@code int} range, then the value of

     * the field must be returned.

     * <p>

     * If the field is not a {@code ChronoField}, then the result of this method

     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}

     * passing {@code this} as the argument.

     * <p>

     * <p>

     * The default implementation must behave equivalent to this code:

     * <pre>

     * </pre>

     *

     * @param field  the field to get, not null

     * @return the value for the field, within the valid range of values

     * @throws ArithmeticException if numeric overflow occurs

     */

    }

    /**

     * Gets the value of the specified field as a {@code long}.

     * <p>

     * This queries the date-time for the value for the specified field.

     * The returned value may be outside the valid range of values for the field.

     * If the date-time cannot return the value, because the field is unsupported or for

     * some other reason, an exception will be thrown.

     *

     * <h3>Specification for implementors</h3>

     * Implementations must check and handle all fields defined in {@link ChronoField}.

     * If the field is supported, then the value of the field must be returned.

     * <p>

     * If the field is not a {@code ChronoField}, then the result of this method

     * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)}

     * passing {@code this} as the argument.

     * <p>

     * Implementations must not alter either this object.

     *

     * @param field  the field to get, not null

     * @return the value for the field

     * @throws DateTimeException if a value for the field cannot be obtained

     * @throws ArithmeticException if numeric overflow occurs

     */

    long getLong(TemporalField field);

    /**

     * Queries this date-time.

     * <p>

     * This queries this date-time using the specified query strategy object.

     * <p>

     * Queries are a key tool for extracting information from date-times.

     * They exists to externalize the process of querying, permitting different

     * approaches, as per the strategy design pattern.

     * Examples might be a query that checks if the date is the day before February 29th

     * in a leap year, or calculates the number of days to your next birthday.

     * <p>

     * The most common query implementations are method references, such as

     * {@code LocalDate::from} and {@code ZoneId::from}.

     *

     * <h3>Specification for implementors</h3>

     * The default implementation must behave equivalent to this code:

     * <pre>

     *    return null;

     *  }

     *  return query.queryFrom(this);

     * </pre>

     * Future versions are permitted to add further queries to the if statement.

     * <p>

     * All classes implementing this interface and overriding this method must call

     * {@code TemporalAccessor.super.query(query)}. JDK classes may avoid calling

     * super if they provide behavior equivalent to the default behaviour, however

     * non-JDK classes may not utilize this optimization and must call {@code super}.

     * <p>

     * If the implementation can supply a value for one of the queries listed in the

     * if statement of the default implementation, then it must do so.

     * For example, an application-defined {@code HourMin} class storing the hour

     * and minute must override this method as follows:

     * <pre>

     *    return MINUTES;

     *  }

     *  return TemporalAccessor.super.query(query);

     * </pre>

     *

     * @param <R> the type of the result

     * @param query  the query to invoke, not null

     * @return the query result, null may be returned (defined by the query)

     * @throws DateTimeException if unable to query

     * @throws ArithmeticException if numeric overflow occurs

     */

            return null;

        }

        return query.queryFrom(this);

    }

}