/*

 * Copyright (c) 2012, 2016 SAP SE. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 *

 */

#include "precompiled.hpp"

#include "runtime/interfaceSupport.inline.hpp"

#include "runtime/os.inline.hpp"

#include "services/attachListener.hpp"

#include "services/dtraceAttacher.hpp"

#include <unistd.h>

#include <signal.h>

#include <sys/types.h>

#include <sys/socket.h>

#include <sys/un.h>

#include <sys/stat.h>

#ifndef UNIX_PATH_MAX

#define UNIX_PATH_MAX   sizeof(((struct sockaddr_un *)0)->sun_path)

#endif

// The attach mechanism on AIX  uses a UNIX domain socket. An attach listener

// thread is created at startup or is created on-demand via a signal from

// the client tool. The attach listener creates a socket and binds it to a file

// in the filesystem. The attach listener then acts as a simple (single-

// threaded) server - it waits for a client to connect, reads the request,

// executes it, and returns the response to the client via the socket

// connection.

//

// As the socket is a UNIX domain socket it means that only clients on the

// local machine can connect. In addition there are two other aspects to

// the security:

// 1. The well known file that the socket is bound to has permission 400

// 2. When a client connect, the SO_PEERID socket option is used to

//    obtain the credentials of client. We check that the effective uid

//    of the client matches this process.

// forward reference

class AixAttachOperation;

class AixAttachListener: AllStatic {

 private:

  // the path to which we bind the UNIX domain socket

  static char _path[UNIX_PATH_MAX];

  static bool _has_path;

  // Shutdown marker to prevent accept blocking during clean-up.

  static bool _shutdown;

  // the file descriptor for the listening socket

  static int _listener;

  static void set_path(char* path) {

    if (path == NULL) {

      _has_path = false;

    } else {

      strncpy(_path, path, UNIX_PATH_MAX);

      _path[UNIX_PATH_MAX-1] = '\0';

      _has_path = true;

    }

  }

  static void set_listener(int s)               { _listener = s; }

  // reads a request from the given connected socket

  static AixAttachOperation* read_request(int s);

 public:

  enum {

    ATTACH_PROTOCOL_VER = 1                     // protocol version

  };

  enum {

    ATTACH_ERROR_BADVERSION     = 101           // error codes

  };

  // initialize the listener, returns 0 if okay

  static int init();

  static char* path()                   { return _path; }

  static bool has_path()                { return _has_path; }

  static int listener()                 { return _listener; }

  // Shutdown marker to prevent accept blocking during clean-up

  static void set_shutdown(bool shutdown) { _shutdown = shutdown; }

  static bool is_shutdown()     { return _shutdown; }

  // write the given buffer to a socket

  static int write_fully(int s, char* buf, int len);

  static AixAttachOperation* dequeue();

};

class AixAttachOperation: public AttachOperation {

 private:

  // the connection to the client

  int _socket;

 public:

  void complete(jint res, bufferedStream* st);

  void set_socket(int s)                                { _socket = s; }

  int socket() const                                    { return _socket; }

  AixAttachOperation(char* name) : AttachOperation(name) {

    set_socket(-1);

  }

};

// statics

char AixAttachListener::_path[UNIX_PATH_MAX];

bool AixAttachListener::_has_path;

int AixAttachListener::_listener = -1;

// Shutdown marker to prevent accept blocking during clean-up

bool AixAttachListener::_shutdown = false;

// Supporting class to help split a buffer into individual components

class ArgumentIterator : public StackObj {

 private:

  char* _pos;

  char* _end;

 public:

  ArgumentIterator(char* arg_buffer, size_t arg_size) {

    _pos = arg_buffer;

    _end = _pos + arg_size - 1;

  }

  char* next() {

    if (*_pos == '\0') {

      if (_pos < _end) {

        _pos += 1;

      }

      return NULL;

    }

    char* res = _pos;

    char* next_pos = strchr(_pos, '\0');

    if (next_pos < _end)  {

      next_pos++;

    }

    _pos = next_pos;

    return res;

  }

};

// On AIX if sockets block until all data has been transmitted

// successfully in some communication domains a socket "close" may

// never complete. We have to take care that after the socket shutdown

// the listener never enters accept state.

// atexit hook to stop listener and unlink the file that it is

// bound too.

// Some modifications to the listener logic to prevent deadlocks on exit.

// 1. We Shutdown the socket here instead. AixAttachOperation::complete() is not the right place

//    since more than one agent in a sequence in JPLIS live tests wouldn't work (Listener thread

//    would be dead after the first operation completion).

// 2. close(s) may never return if the listener thread is in socket accept(). Unlinking the file

//    should be sufficient for cleanup.

extern "C" {

  static void listener_cleanup() {

    static int cleanup_done;

    if (!cleanup_done) {

      cleanup_done = 1;

      AixAttachListener::set_shutdown(true);

      int s = AixAttachListener::listener();

      if (s != -1) {

        ::shutdown(s, 2);

      }

      if (AixAttachListener::has_path()) {

        ::unlink(AixAttachListener::path());

      }

    }

  }

}

// Initialization - create a listener socket and bind it to a file

int AixAttachListener::init() {

  char path[UNIX_PATH_MAX];          // socket file

  char initial_path[UNIX_PATH_MAX];  // socket file during setup

  int listener;                      // listener socket (file descriptor)

  // register function to cleanup

  ::atexit(listener_cleanup);

  int n = snprintf(path, UNIX_PATH_MAX, "%s/.java_pid%d",

                   os::get_temp_directory(), os::current_process_id());

  if (n < (int)UNIX_PATH_MAX) {

    n = snprintf(initial_path, UNIX_PATH_MAX, "%s.tmp", path);

  }

  if (n >= (int)UNIX_PATH_MAX) {

    return -1;

  }

  // create the listener socket

  listener = ::socket(PF_UNIX, SOCK_STREAM, 0);

  if (listener == -1) {

    return -1;

  }

  // bind socket

  struct sockaddr_un addr;

  memset((void *)&addr, 0, sizeof(addr));

  addr.sun_family = AF_UNIX;

  strcpy(addr.sun_path, initial_path);

  ::unlink(initial_path);

  // We must call bind with the actual socketaddr length. This is obligatory for AS400.

  int res = ::bind(listener, (struct sockaddr*)&addr, SUN_LEN(&addr));

  if (res == -1) {

    ::close(listener);

    return -1;

  }

  // put in listen mode, set permissions, and rename into place

  res = ::listen(listener, 5);

  if (res == 0) {

      RESTARTABLE(::chmod(initial_path, (S_IREAD|S_IWRITE) & ~(S_IRGRP|S_IWGRP|S_IROTH|S_IWOTH)), res);

      if (res == 0) {

          res = ::rename(initial_path, path);

      }

  }

  if (res == -1) {

    ::close(listener);

    ::unlink(initial_path);

    return -1;

  }

  set_path(path);

  set_listener(listener);

  set_shutdown(false);

  return 0;

}

// Given a socket that is connected to a peer we read the request and

// create an AttachOperation. As the socket is blocking there is potential

// for a denial-of-service if the peer does not response. However this happens

// after the peer credentials have been checked and in the worst case it just

// means that the attach listener thread is blocked.

//

AixAttachOperation* AixAttachListener::read_request(int s) {

  char ver_str[8];

  sprintf(ver_str, "%d", ATTACH_PROTOCOL_VER);

  // The request is a sequence of strings so we first figure out the

  // expected count and the maximum possible length of the request.

  // The request is:

  //   <ver>0<cmd>0<arg>0<arg>0<arg>0

  // where <ver> is the protocol version (1), <cmd> is the command

  // name ("load", "datadump", ...), and <arg> is an argument

  int expected_str_count = 2 + AttachOperation::arg_count_max;

  const int max_len = (sizeof(ver_str) + 1) + (AttachOperation::name_length_max + 1) +

    AttachOperation::arg_count_max*(AttachOperation::arg_length_max + 1);

  char buf[max_len];

  int str_count = 0;

  // Read until all (expected) strings have been read, the buffer is

  // full, or EOF.

  int off = 0;

  int left = max_len;

  do {

    int n;

    // Don't block on interrupts because this will

    // hang in the clean-up when shutting down.

    n = read(s, buf+off, left);

    if (n == -1) {

      return NULL;      // reset by peer or other error

    }

    if (n == 0) {       // end of file reached

      break;

    }

    for (int i=0; i<n; i++) {

      if (buf[off+i] == 0) {

        // EOS found

        str_count++;

        // The first string is <ver> so check it now to

        // check for protocol mis-match

        if (str_count == 1) {

          if ((strlen(buf) != strlen(ver_str)) ||

              (atoi(buf) != ATTACH_PROTOCOL_VER)) {

            char msg[32];

            sprintf(msg, "%d\n", ATTACH_ERROR_BADVERSION);

            write_fully(s, msg, strlen(msg));

            return NULL;

          }

        }

      }

    }

    off += n;

    left -= n;

  } while (left > 0 && str_count < expected_str_count);

  if (str_count != expected_str_count) {

    return NULL;        // incomplete request

  }

  // parse request

  ArgumentIterator args(buf, (max_len)-left);

  // version already checked

  char* v = args.next();

  char* name = args.next();

  if (name == NULL || strlen(name) > AttachOperation::name_length_max) {

    return NULL;

  }

  AixAttachOperation* op = new AixAttachOperation(name);

  for (int i=0; i<AttachOperation::arg_count_max; i++) {

    char* arg = args.next();

    if (arg == NULL) {

      op->set_arg(i, NULL);

    } else {

      if (strlen(arg) > AttachOperation::arg_length_max) {

        delete op;

        return NULL;

      }

      op->set_arg(i, arg);

    }

  }

  op->set_socket(s);

  return op;

}

// Dequeue an operation

//

// In the Aix implementation there is only a single operation and clients

// cannot queue commands (except at the socket level).

//

AixAttachOperation* AixAttachListener::dequeue() {

  for (;;) {

    int s;

    // wait for client to connect

    struct sockaddr addr;

    socklen_t len = sizeof(addr);

    memset(&addr, 0, len);

    // We must prevent accept blocking on the socket if it has been shut down.

    // Therefore we allow interrups and check whether we have been shut down already.

    if (AixAttachListener::is_shutdown()) {

      return NULL;

    }

    s=::accept(listener(), &addr, &len);

    if (s == -1) {

      return NULL;      // log a warning?

    }

    // Added timeouts for read and write.  If we get no request within the

    // next AttachListenerTimeout milliseconds we just finish the connection.

    struct timeval tv;

    tv.tv_sec = 0;

    tv.tv_usec = AttachListenerTimeout * 1000;

    ::setsockopt(s, SOL_SOCKET, SO_RCVTIMEO, (char*)&tv, sizeof(tv));

    ::setsockopt(s, SOL_SOCKET, SO_SNDTIMEO, (char*)&tv, sizeof(tv));

    // get the credentials of the peer and check the effective uid/guid

    // - check with jeff on this.

    struct peercred_struct cred_info;

    socklen_t optlen = sizeof(cred_info);

    if (::getsockopt(s, SOL_SOCKET, SO_PEERID, (void*)&cred_info, &optlen) == -1) {

      ::close(s);

      continue;

    }

    uid_t euid = geteuid();

    gid_t egid = getegid();

    if (cred_info.euid != euid || cred_info.egid != egid) {

      ::close(s);

      continue;

    }

    // peer credential look okay so we read the request

    AixAttachOperation* op = read_request(s);

    if (op == NULL) {

      ::close(s);

      continue;

    } else {

      return op;

    }

  }

}

// write the given buffer to the socket

int AixAttachListener::write_fully(int s, char* buf, int len) {

  do {

    int n = ::write(s, buf, len);

    if (n == -1) {

      if (errno != EINTR) return -1;

    } else {

      buf += n;

      len -= n;

    }

  }

  while (len > 0);

  return 0;

}

// Complete an operation by sending the operation result and any result

// output to the client. At this time the socket is in blocking mode so

// potentially we can block if there is a lot of data and the client is

// non-responsive. For most operations this is a non-issue because the

// default send buffer is sufficient to buffer everything. In the future

// if there are operations that involves a very big reply then it the

// socket could be made non-blocking and a timeout could be used.

void AixAttachOperation::complete(jint result, bufferedStream* st) {

  JavaThread* thread = JavaThread::current();

  ThreadBlockInVM tbivm(thread);

  thread->set_suspend_equivalent();

  // cleared by handle_special_suspend_equivalent_condition() or

  // java_suspend_self() via check_and_wait_while_suspended()

  // write operation result

  char msg[32];

  sprintf(msg, "%d\n", result);

  int rc = AixAttachListener::write_fully(this->socket(), msg, strlen(msg));

  // write any result data

  if (rc == 0) {

    // Shutdown the socket in the cleanup function to enable more than

    // one agent attach in a sequence (see comments to listener_cleanup()).

    AixAttachListener::write_fully(this->socket(), (char*) st->base(), st->size());

  }

  // done

  ::close(this->socket());

  // were we externally suspended while we were waiting?

  thread->check_and_wait_while_suspended();

  delete this;

}

// AttachListener functions

AttachOperation* AttachListener::dequeue() {

  JavaThread* thread = JavaThread::current();

  ThreadBlockInVM tbivm(thread);

  thread->set_suspend_equivalent();

  // cleared by handle_special_suspend_equivalent_condition() or

  // java_suspend_self() via check_and_wait_while_suspended()

  AttachOperation* op = AixAttachListener::dequeue();

  // were we externally suspended while we were waiting?

  thread->check_and_wait_while_suspended();

  return op;

}

// Performs initialization at vm startup

// For AIX we remove any stale .java_pid file which could cause

// an attaching process to think we are ready to receive on the

// domain socket before we are properly initialized

void AttachListener::vm_start() {

  char fn[UNIX_PATH_MAX];

  struct stat64 st;

  int ret;

  int n = snprintf(fn, UNIX_PATH_MAX, "%s/.java_pid%d",

           os::get_temp_directory(), os::current_process_id());

  assert(n < (int)UNIX_PATH_MAX, "java_pid file name buffer overflow");

  RESTARTABLE(::stat64(fn, &st), ret);

  if (ret == 0) {

    ret = ::unlink(fn);

    if (ret == -1) {

      log_debug(attach)("Failed to remove stale attach pid file at %s", fn);

    }

  }

}

int AttachListener::pd_init() {

  JavaThread* thread = JavaThread::current();

  ThreadBlockInVM tbivm(thread);

  thread->set_suspend_equivalent();

  // cleared by handle_special_suspend_equivalent_condition() or

  // java_suspend_self() via check_and_wait_while_suspended()

  int ret_code = AixAttachListener::init();

  // were we externally suspended while we were waiting?

  thread->check_and_wait_while_suspended();

  return ret_code;

}

// Attach Listener is started lazily except in the case when

// +ReduseSignalUsage is used

bool AttachListener::init_at_startup() {

  if (ReduceSignalUsage) {

    return true;

  } else {

    return false;