--- a/jdk/src/share/classes/java/awt/Window.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/share/classes/java/awt/Window.java Tue Feb 08 14:19:11 2011 -0800
@@ -504,6 +504,8 @@
}
modalExclusionType = Dialog.ModalExclusionType.NO_EXCLUDE;
+
+ SunToolkit.checkAndSetPolicy(this, false);
}
/**
--- a/jdk/src/share/classes/java/awt/doc-files/FocusSpec.html Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/share/classes/java/awt/doc-files/FocusSpec.html Tue Feb 08 14:19:11 2011 -0800
@@ -894,8 +894,7 @@
focus across Windows. If the request is denied for this reason, the
request is remembered and will be granted when the Window is later
focused by the user. Otherwise, the focus change request changes the
-focused Window as well. Currently, Microsoft Windows supports cross-Window
-focus transfers while Solaris does not.
+focused Window as well.
<p>
There is no way to determine synchronously whether a focus change
request has been granted. Instead, client code must install a
--- a/jdk/src/solaris/classes/sun/awt/X11/XComponentPeer.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/solaris/classes/sun/awt/X11/XComponentPeer.java Tue Feb 08 14:19:11 2011 -0800
@@ -725,7 +725,21 @@
XGlobalCursorManager.getCursorManager().updateCursorImmediately();
}
- public void pSetCursor(Cursor cursor) {
+ public final void pSetCursor(Cursor cursor) {
+ this.pSetCursor(cursor, true);
+ }
+
+ /*
+ * The method changes the cursor.
+ * @param cursor - a new cursor to change to.
+ * @param ignoreSubComponents - if {@code true} is passed then
+ * the new cursor will be installed on window.
+ * if {@code false} is passed then
+ * subsequent components will try to handle
+ * this request and install their cursor.
+ */
+ //ignoreSubComponents not used here
+ public void pSetCursor(Cursor cursor, boolean ignoreSubComponents) {
XToolkit.awtLock();
try {
long xcursor = XGlobalCursorManager.getCursor(cursor);
--- a/jdk/src/solaris/classes/sun/awt/X11/XGlobalCursorManager.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/solaris/classes/sun/awt/X11/XGlobalCursorManager.java Tue Feb 08 14:19:11 2011 -0800
@@ -104,7 +104,9 @@
nativeContainer = new WeakReference<Component>(nc);
}
- ((XComponentPeer)nc_peer).pSetCursor(cur);
+ //6431076. A subcomponents (a XTextArea in particular)
+ //may want to override the cursor over some of their parts.
+ ((XComponentPeer)nc_peer).pSetCursor(cur, false);
// in case of grab we do for Swing we need to update keep cursor updated
// (we don't need this in case of AWT menus). Window Manager consider
// the grabber as a current window and use its cursor. So we need to
--- a/jdk/src/solaris/classes/sun/awt/X11/XSelection.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/solaris/classes/sun/awt/X11/XSelection.java Tue Feb 08 14:19:11 2011 -0800
@@ -301,13 +301,8 @@
} finally {
XToolkit.awtUnlock();
}
- if (!dataGetter.isExecuted()) {
- throw new IOException("Owner timed out");
- }
- if (dataGetter.isDisposed()) {
- throw new IOException("Owner failed to convert data");
- }
+ validateDataGetter(dataGetter);
// Handle incremental transfer.
if (dataGetter.getActualType() ==
@@ -380,14 +375,7 @@
XToolkit.awtUnlock();
}
- // The owner didn't respond - terminate the transfer.
- if (!incrDataGetter.isExecuted()) {
- throw new IOException("Owner timed out");
- }
-
- if (incrDataGetter.isDisposed()) {
- throw new IOException("Owner failed to convert data");
- }
+ validateDataGetter(dataGetter);
if (incrDataGetter.getActualFormat() != 8) {
throw new IOException("Unsupported data format: " +
@@ -445,6 +433,23 @@
return data != null ? data : new byte[0];
}
+ void validateDataGetter(WindowPropertyGetter propertyGetter)
+ throws IOException
+ {
+ // The order of checks is important because a property getter
+ // has not been executed in case of timeout as well as in case of
+ // changed selection owner.
+
+ if (propertyGetter.isDisposed()) {
+ throw new IOException("Owner failed to convert data");
+ }
+
+ // The owner didn't respond - terminate the transfer.
+ if (!propertyGetter.isExecuted()) {
+ throw new IOException("Owner timed out");
+ }
+ }
+
// To be MT-safe this method should be called under awtLock.
boolean isOwner() {
return isOwner;
--- a/jdk/src/solaris/classes/sun/awt/X11/XTextAreaPeer.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/src/solaris/classes/sun/awt/X11/XTextAreaPeer.java Tue Feb 08 14:19:11 2011 -0800
@@ -175,6 +175,34 @@
super.dispose();
}
+
+ /*
+ * The method overrides one from XComponentPeer
+ * If ignoreSubComponents=={@code true} it calls super.
+ * If ignoreSubComponents=={@code false} it uses the XTextArea machinery
+ * to change cursor appropriately. In particular it changes the cursor to
+ * default if over scrollbars.
+ */
+ @Override
+ public void pSetCursor(Cursor cursor, boolean ignoreSubComponents) {
+ Point onScreen = getLocationOnScreen();
+ if (ignoreSubComponents ||
+ javaMouseEventHandler == null ||
+ onScreen == null)
+ {
+ super.pSetCursor(cursor, true);
+ return;
+ }
+
+ Point cursorPos = new Point();
+ ((XGlobalCursorManager)XGlobalCursorManager.getCursorManager()).getCursorPos(cursorPos);
+
+ Point localPoint = new Point(cursorPos.x - onScreen.x, cursorPos.y - onScreen.y );
+
+ javaMouseEventHandler.setPointerToUnderPoint(localPoint);
+ javaMouseEventHandler.setCursor();
+ }
+
void setScrollBarVisibility() {
int visibility = ((TextArea)target).getScrollbarVisibility();
jtext.setLineWrap(false);
@@ -1264,13 +1292,13 @@
void handle( MouseEvent event ) {
if ( ! grabbed ) {
// dispatch() needs up-to-date pointer in ungrabbed case.
- setPointerToUnderEventPoint( event );
+ setPointerToUnderPoint( event.getPoint() );
}
dispatch( event );
boolean wasGrabbed = grabbed;
grabbed_update( event );
if ( wasGrabbed && ! grabbed ) {
- setPointerToUnderEventPoint( event );
+ setPointerToUnderPoint( event.getPoint() );
}
setCursor();
}
@@ -1338,7 +1366,7 @@
// 'target.getCursor()' is also applied from elsewhere
// (at least now), but only when mouse "entered", and
// before 'XTextAreaPeer.handleJavaMouseEvent' is invoked.
- outer.pSetCursor( outer.target.getCursor() );
+ outer.pSetCursor( outer.target.getCursor(), true );
}
else {
// We can write here a more intelligent cursor selection
@@ -1346,7 +1374,7 @@
// However, I see no point in doing so now. But if you feel
// like implementing it, you'll probably need to introduce
// 'Pointer.Type.PANEL'.
- outer.pSetCursor( outer.textPane.getCursor() );
+ outer.pSetCursor( outer.textPane.getCursor(), true );
}
}
@@ -1391,8 +1419,7 @@
return l;
}
- private void setPointerToUnderEventPoint( MouseEvent event ) {
- Point point = event.getPoint();
+ private void setPointerToUnderPoint( Point point ) {
if ( outer.textPane.getViewport().getBounds().contains( point ) ) {
current.setText();
}
--- a/jdk/test/java/awt/Container/CheckZOrderChange/CheckZOrderChange.java Tue Feb 08 09:22:49 2011 -0500
+++ b/jdk/test/java/awt/Container/CheckZOrderChange/CheckZOrderChange.java Tue Feb 08 14:19:11 2011 -0800
@@ -1,3 +1,26 @@
+/*
+ * Copyright (c) 2008, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
/*
@test %I% %E%
@bug 2161766
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/java/awt/KeyboardFocusmanager/DefaultPolicyChange/DefaultPolicyChange_AWT.java Tue Feb 08 14:19:11 2011 -0800
@@ -0,0 +1,44 @@
+/*
+ @test
+ @bug 6741526
+ @summary KeyboardFocusManager.setDefaultFocusTraversalPolicy(FocusTraversalPolicy) affects created components
+ @library ../../regtesthelpers
+ @build Sysout
+ @author Andrei Dmitriev : area=awt-focus
+ @run main DefaultPolicyChange_AWT
+*/
+
+import java.awt.*;
+import test.java.awt.regtesthelpers.Sysout;
+
+public class DefaultPolicyChange_AWT {
+ public static void main(String []s) {
+ DefaultPolicyChange_AWT.runTestAWT();
+ }
+
+ private static void runTestAWT(){
+ KeyboardFocusManager currentKFM = KeyboardFocusManager.getCurrentKeyboardFocusManager();
+ FocusTraversalPolicy defaultFTP = currentKFM.getDefaultFocusTraversalPolicy();
+ ContainerOrderFocusTraversalPolicy newFTP = new ContainerOrderFocusTraversalPolicy();
+
+ Frame frame = new Frame();
+ Window window = new Window(frame);
+
+ FocusTraversalPolicy resultFTP = window.getFocusTraversalPolicy();
+ Sysout.println("FocusTraversalPolicy on window = " + resultFTP);
+ /**
+ * Note: this call doesn't affect already created components as they have
+ * their policy initialized. Only new components will use this policy as
+ * their default policy.
+ **/
+ Sysout.println("Now will set another policy.");
+ currentKFM.setDefaultFocusTraversalPolicy(newFTP);
+ resultFTP = window.getFocusTraversalPolicy();
+ if (!resultFTP.equals(defaultFTP)) {
+ Sysout.println("Failure! FocusTraversalPolicy should not change");
+ Sysout.println("Was: " + defaultFTP);
+ Sysout.println("Become: " + resultFTP);
+ throw new RuntimeException("Failure! FocusTraversalPolicy should not change");
+ }
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/java/awt/KeyboardFocusmanager/DefaultPolicyChange/DefaultPolicyChange_Swing.java Tue Feb 08 14:19:11 2011 -0800
@@ -0,0 +1,69 @@
+/*
+ @test
+ @bug 6741526
+ @summary KeyboardFocusManager.setDefaultFocusTraversalPolicy(FocusTraversalPolicy) affects created components
+ @library ../../regtesthelpers
+ @build Sysout
+ @author Andrei Dmitriev : area=awt-focus
+ @run main DefaultPolicyChange_Swing
+*/
+
+import java.awt.*;
+import javax.swing.*;
+import javax.swing.table.DefaultTableModel;
+import test.java.awt.regtesthelpers.Sysout;
+
+public class DefaultPolicyChange_Swing {
+ public static void main(String []s) {
+ EventQueue.invokeLater(new Runnable(){
+ public void run (){
+ DefaultPolicyChange_Swing.runTestSwing();
+ }
+ });
+ }
+ private static void runTestSwing(){
+ KeyboardFocusManager currentKFM = KeyboardFocusManager.getCurrentKeyboardFocusManager();
+ FocusTraversalPolicy defaultFTP = currentKFM.getDefaultFocusTraversalPolicy();
+ ContainerOrderFocusTraversalPolicy newFTP = new ContainerOrderFocusTraversalPolicy();
+
+
+ JFrame jf = new JFrame("Test1");
+ JWindow jw = new JWindow(jf);
+ JDialog jd = new JDialog(jf);
+ JPanel jp1 = new JPanel();
+ JButton jb1 = new JButton("jb1");
+ JTable jt1 = new JTable(new DefaultTableModel());
+
+ jf.add(jb1);
+ jf.add(jt1);
+ jf.add(jp1);
+ System.out.println("FTP current on jf= " + jf.getFocusTraversalPolicy());
+ System.out.println("FTP current on jw= " + jw.getFocusTraversalPolicy());
+ System.out.println("FTP current on jd= " + jd.getFocusTraversalPolicy());
+
+ if (!(jf.getFocusTraversalPolicy() instanceof LayoutFocusTraversalPolicy) ||
+ !(jw.getFocusTraversalPolicy() instanceof LayoutFocusTraversalPolicy) ||
+ !(jd.getFocusTraversalPolicy() instanceof LayoutFocusTraversalPolicy))
+ {
+ throw new RuntimeException("Failure! Swing toplevel must have LayoutFocusTraversalPolicy installed");
+ }
+
+ jf.setVisible(true);
+
+ System.out.println("Now will set another policy.");
+ currentKFM.setDefaultFocusTraversalPolicy(newFTP);
+
+ FocusTraversalPolicy resultFTP = jw.getFocusTraversalPolicy();
+
+ System.out.println("FTP current on jf= " + jf.getFocusTraversalPolicy());
+ System.out.println("FTP current on jw= " + jw.getFocusTraversalPolicy());
+ System.out.println("FTP current on jd= " + jd.getFocusTraversalPolicy());
+
+ if (!resultFTP.equals(defaultFTP)) {
+ Sysout.println("Failure! FocusTraversalPolicy should not change");
+ Sysout.println("Was: " + defaultFTP);
+ Sysout.println("Become: " + resultFTP);
+ throw new RuntimeException("Failure! FocusTraversalPolicy should not change");
+ }
+ }
+}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/java/awt/TextArea/MouseOverScrollbarWhenTyping/Test.java Tue Feb 08 14:19:11 2011 -0800
@@ -0,0 +1,385 @@
+/*
+ @test
+ @bug 6431076
+ @summary Mouse cursor must remain DEFAULT over scrollbar when text is typed
+ @author Andrei Dmitriev: area=TextArea
+ @run main/manual Test
+*/
+
+import java.awt.*;
+import java.awt.event.*;
+
+public class Test {
+ private static void init() {
+ Frame f = new Frame("Test for cursor");
+ final int dim = 100;
+ String line = "";
+ for( int i=0; i<dim; ++i ) {
+ line += "a";
+ }
+ String text = "";
+ for( int i=0; i<dim; ++i ) {
+ text += line;
+ if( i < dim-1 ) {
+ text += "\n";
+ }
+ }
+
+ f.setLayout( new BorderLayout () );
+ f.add( new TextArea( text ) );
+ f.setSize(400, 300);
+
+ f.setVisible(true);
+
+ String[] instructions = {
+ "1. Place keyboard cursor inside TextArea.",
+ "2. Repeat steps 2.* for each of two TextArea's scrollbars.",
+ "2.1. Place mouse cursor over TextArea's scrollbar.",
+ "2.2. If mouse cursor is not DEFAULT_CURSOR (arrow), test failed.",
+ "2.3. Type any symbol into TextArea.",
+ "2.4. Type ENTER symbol into TextArea.",
+ "2.5. If mouse cursor changes to TEXT_CURSOR (beam), test failed",
+ "(if cursor disappears on Windows, it's OK).",
+ "3. Test passed.",
+ };
+
+ Sysout.createDialogWithInstructions( instructions );
+ }
+
+
+
+ /*****************************************************
+ * Standard Test Machinery Section
+ * DO NOT modify anything in this section -- it's a
+ * standard chunk of code which has all of the
+ * synchronisation necessary for the test harness.
+ * By keeping it the same in all tests, it is easier
+ * to read and understand someone else's test, as
+ * well as insuring that all tests behave correctly
+ * with the test harness.
+ * There is a section following this for test-defined
+ * classes
+ ******************************************************/
+ private static boolean theTestPassed = false;
+ private static boolean testGeneratedInterrupt = false;
+ private static String failureMessage = "";
+
+ private static Thread mainThread = null;
+
+ private static int sleepTime = 300000;
+
+ public static void main( String args[] ) throws InterruptedException
+ {
+ mainThread = Thread.currentThread();
+ try
+ {
+ init();
+ }
+ catch( TestPassedException e )
+ {
+ //The test passed, so just return from main and harness will
+ // interepret this return as a pass
+ return;
+ }
+ //At this point, neither test passed nor test failed has been
+ // called -- either would have thrown an exception and ended the
+ // test, so we know we have multiple threads.
+
+ //Test involves other threads, so sleep and wait for them to
+ // called pass() or fail()
+ try
+ {
+ Thread.sleep( sleepTime );
+ //Timed out, so fail the test
+ throw new RuntimeException( "Timed out after " + sleepTime/1000 + " seconds" );
+ }
+ catch (InterruptedException e)
+ {
+ if( ! testGeneratedInterrupt ) throw e;
+
+ //reset flag in case hit this code more than once for some reason (just safety)
+ testGeneratedInterrupt = false;
+ if ( theTestPassed == false )
+ {
+ throw new RuntimeException( failureMessage );
+ }
+ }
+
+ }//main
+
+ public static synchronized void setTimeoutTo( int seconds )
+ {
+ sleepTime = seconds * 1000;
+ }
+
+ public static synchronized void pass()
+ {
+ Sysout.println( "The test passed." );
+ Sysout.println( "The test is over, hit Ctl-C to stop Java VM" );
+ //first check if this is executing in main thread
+ if ( mainThread == Thread.currentThread() )
+ {
+ //Still in the main thread, so set the flag just for kicks,
+ // and throw a test passed exception which will be caught
+ // and end the test.
+ theTestPassed = true;
+ throw new TestPassedException();
+ }
+ //pass was called from a different thread, so set the flag and interrupt
+ // the main thead.
+ theTestPassed = true;
+ testGeneratedInterrupt = true;
+ if (mainThread != null){
+ mainThread.interrupt();
+ }
+ }//pass()
+
+ public static synchronized void fail()
+ {
+ //test writer didn't specify why test failed, so give generic
+ fail( "it just plain failed! :-)" );
+ }
+
+ public static synchronized void fail( String whyFailed )
+ {
+ Sysout.println( "The test failed: " + whyFailed );
+ Sysout.println( "The test is over, hit Ctl-C to stop Java VM" );
+ //check if this called from main thread
+ if ( mainThread == Thread.currentThread() )
+ {
+ //If main thread, fail now 'cause not sleeping
+ throw new RuntimeException( whyFailed );
+ }
+ theTestPassed = false;
+ testGeneratedInterrupt = true;
+ failureMessage = whyFailed;
+ mainThread.interrupt();
+ }//fail()
+
+}// class
+
+//This exception is used to exit from any level of call nesting
+// when it's determined that the test has passed, and immediately
+// end the test.
+class TestPassedException extends RuntimeException
+{
+}
+
+//*********** End Standard Test Machinery Section **********
+
+
+//************ Begin classes defined for the test ****************
+
+// make listeners in a class defined here, and instantiate them in init()
+
+/* Example of a class which may be written as part of a test
+class NewClass implements anInterface
+ {
+ static int newVar = 0;
+
+ public void eventDispatched(AWTEvent e)
+ {
+ //Counting events to see if we get enough
+ eventCount++;
+
+ if( eventCount == 20 )
+ {
+ //got enough events, so pass
+
+ ManualMainTest.pass();
+ }
+ else if( tries == 20 )
+ {
+ //tried too many times without getting enough events so fail
+
+ ManualMainTest.fail();
+ }
+
+ }// eventDispatched()
+
+ }// NewClass class
+
+*/
+
+
+//************** End classes defined for the test *******************
+
+
+
+
+/****************************************************
+ Standard Test Machinery
+ DO NOT modify anything below -- it's a standard
+ chunk of code whose purpose is to make user
+ interaction uniform, and thereby make it simpler
+ to read and understand someone else's test.
+ ****************************************************/
+
+/**
+ This is part of the standard test machinery.
+ It creates a dialog (with the instructions), and is the interface
+ for sending text messages to the user.
+ To print the instructions, send an array of strings to Sysout.createDialog
+ WithInstructions method. Put one line of instructions per array entry.
+ To display a message for the tester to see, simply call Sysout.println
+ with the string to be displayed.
+ This mimics System.out.println but works within the test harness as well
+ as standalone.
+ */
+
+class Sysout
+{
+ private static TestDialog dialog;
+ private static boolean numbering = false;
+ private static int messageNumber = 0;
+
+ public static void createDialogWithInstructions( String[] instructions )
+ {
+ dialog = new TestDialog( new Frame(), "Instructions" );
+ dialog.printInstructions( instructions );
+ dialog.setVisible(true);
+ println( "Any messages for the tester will display here." );
+ }
+
+ public static void createDialog( )
+ {
+ dialog = new TestDialog( new Frame(), "Instructions" );
+ String[] defInstr = { "Instructions will appear here. ", "" } ;
+ dialog.printInstructions( defInstr );
+ dialog.setVisible(true);
+ println( "Any messages for the tester will display here." );
+ }
+
+
+ /* Enables message counting for the tester. */
+ public static void enableNumbering(boolean enable){
+ numbering = enable;
+ }
+
+ public static void printInstructions( String[] instructions )
+ {
+ dialog.printInstructions( instructions );
+ }
+
+
+ public static void println( String messageIn )
+ {
+ if (numbering) {
+ messageIn = "" + messageNumber + " " + messageIn;
+ messageNumber++;
+ }
+ dialog.displayMessage( messageIn );
+ }
+
+}// Sysout class
+
+/**
+ This is part of the standard test machinery. It provides a place for the
+ test instructions to be displayed, and a place for interactive messages
+ to the user to be displayed.
+ To have the test instructions displayed, see Sysout.
+ To have a message to the user be displayed, see Sysout.
+ Do not call anything in this dialog directly.
+ */
+class TestDialog extends Dialog implements ActionListener
+{
+
+ TextArea instructionsText;
+ TextArea messageText;
+ int maxStringLength = 80;
+ Panel buttonP = new Panel();
+ Button passB = new Button( "pass" );
+ Button failB = new Button( "fail" );
+
+ //DO NOT call this directly, go through Sysout
+ public TestDialog( Frame frame, String name )
+ {
+ super( frame, name );
+ int scrollBoth = TextArea.SCROLLBARS_BOTH;
+ instructionsText = new TextArea( "", 15, maxStringLength, scrollBoth );
+ add( "North", instructionsText );
+
+ messageText = new TextArea( "", 5, maxStringLength, scrollBoth );
+ add("Center", messageText);
+
+ passB = new Button( "pass" );
+ passB.setActionCommand( "pass" );
+ passB.addActionListener( this );
+ buttonP.add( "East", passB );
+
+ failB = new Button( "fail" );
+ failB.setActionCommand( "fail" );
+ failB.addActionListener( this );
+ buttonP.add( "West", failB );
+
+ add( "South", buttonP );
+ pack();
+
+ setVisible(true);
+ }// TestDialog()
+
+ //DO NOT call this directly, go through Sysout
+ public void printInstructions( String[] instructions )
+ {
+ //Clear out any current instructions
+ instructionsText.setText( "" );
+
+ //Go down array of instruction strings
+
+ String printStr, remainingStr;
+ for( int i=0; i < instructions.length; i++ )
+ {
+ //chop up each into pieces maxSringLength long
+ remainingStr = instructions[ i ];
+ while( remainingStr.length() > 0 )
+ {
+ //if longer than max then chop off first max chars to print
+ if( remainingStr.length() >= maxStringLength )
+ {
+ //Try to chop on a word boundary
+ int posOfSpace = remainingStr.
+ lastIndexOf( ' ', maxStringLength - 1 );
+
+ if( posOfSpace <= 0 ) posOfSpace = maxStringLength - 1;
+
+ printStr = remainingStr.substring( 0, posOfSpace + 1 );
+ remainingStr = remainingStr.substring( posOfSpace + 1 );
+ }
+ //else just print
+ else
+ {
+ printStr = remainingStr;
+ remainingStr = "";
+ }
+
+ instructionsText.append( printStr + "\n" );
+
+ }// while
+
+ }// for
+
+ }//printInstructions()
+
+ //DO NOT call this directly, go through Sysout
+ public void displayMessage( String messageIn )
+ {
+ messageText.append( messageIn + "\n" );
+ System.out.println(messageIn);
+ }
+
+ //catch presses of the passed and failed buttons.
+ //simply call the standard pass() or fail() static methods of
+ //ManualMainTest
+ public void actionPerformed( ActionEvent e )
+ {
+ if( e.getActionCommand() == "pass" )
+ {
+ Test.pass();
+ }
+ else
+ {
+ Test.fail();
+ }
+ }
+
+}// TestDialog class
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/test/java/awt/TextArea/MouseOverScrollbarWhenTyping/Test1.java Tue Feb 08 14:19:11 2011 -0800
@@ -0,0 +1,386 @@
+/*
+ @test
+ @bug 6431076
+ @summary Mouse cursor must remain DEFAULT over scrollbar when text is typed
+ @author Andrei Dmitriev: area=TextArea
+ @run main/manual Test1
+*/
+
+import java.awt.*;
+import java.awt.event.*;
+
+public class Test1 {
+ private static void init() {
+ Frame f = new Frame("Test1 for cursor");
+ final int dim = 100;
+ String line = "";
+ for( int i=0; i<dim; ++i ) {
+ line += "a";
+ }
+ String text = "";
+ for( int i=0; i<dim; ++i ) {
+ text += line;
+ if( i < dim-1 ) {
+ text += "\n";
+ }
+ }
+
+ f.setLayout( new BorderLayout () );
+ f.add( new TextArea( text ) );
+ f.setSize(400, 300);
+ f.setCursor(Cursor.getPredefinedCursor(Cursor.HAND_CURSOR));
+
+ f.setVisible(true);
+
+ String[] instructions = {
+ "1. Place keyboard cursor inside TextArea.",
+ "2. Repeat steps 2.* for each of two TextArea's scrollbars.",
+ "2.1. Place mouse cursor over TextArea's scrollbar.",
+ "2.2. If mouse cursor is not HAND_CURSOR, test failed.",
+ "2.3. Type any symbol into TextArea.",
+ "2.4. Type ENTER symbol into TextArea.",
+ "2.5. If mouse cursor changes, test failed",
+ "(if cursor disappears on Windows, it's OK).",
+ "3. Test passed.",
+ };
+
+ Sysout.createDialogWithInstructions( instructions );
+ }
+
+
+
+ /*****************************************************
+ * Standard Test Machinery Section
+ * DO NOT modify anything in this section -- it's a
+ * standard chunk of code which has all of the
+ * synchronisation necessary for the test harness.
+ * By keeping it the same in all tests, it is easier
+ * to read and understand someone else's test, as
+ * well as insuring that all tests behave correctly
+ * with the test harness.
+ * There is a section following this for test-defined
+ * classes
+ ******************************************************/
+ private static boolean theTestPassed = false;
+ private static boolean testGeneratedInterrupt = false;
+ private static String failureMessage = "";
+
+ private static Thread mainThread = null;
+
+ private static int sleepTime = 300000;
+
+ public static void main( String args[] ) throws InterruptedException
+ {
+ mainThread = Thread.currentThread();
+ try
+ {
+ init();
+ }
+ catch( TestPassedException e )
+ {
+ //The test passed, so just return from main and harness will
+ // interepret this return as a pass
+ return;
+ }
+ //At this point, neither test passed nor test failed has been
+ // called -- either would have thrown an exception and ended the
+ // test, so we know we have multiple threads.
+
+ //Test involves other threads, so sleep and wait for them to
+ // called pass() or fail()
+ try
+ {
+ Thread.sleep( sleepTime );
+ //Timed out, so fail the test
+ throw new RuntimeException( "Timed out after " + sleepTime/1000 + " seconds" );
+ }
+ catch (InterruptedException e)
+ {
+ if( ! testGeneratedInterrupt ) throw e;
+
+ //reset flag in case hit this code more than once for some reason (just safety)
+ testGeneratedInterrupt = false;
+ if ( theTestPassed == false )
+ {
+ throw new RuntimeException( failureMessage );
+ }
+ }
+
+ }//main
+
+ public static synchronized void setTimeoutTo( int seconds )
+ {
+ sleepTime = seconds * 1000;
+ }
+
+ public static synchronized void pass()
+ {
+ Sysout.println( "The test passed." );
+ Sysout.println( "The test is over, hit Ctl-C to stop Java VM" );
+ //first check if this is executing in main thread
+ if ( mainThread == Thread.currentThread() )
+ {
+ //Still in the main thread, so set the flag just for kicks,
+ // and throw a test passed exception which will be caught
+ // and end the test.
+ theTestPassed = true;
+ throw new TestPassedException();
+ }
+ //pass was called from a different thread, so set the flag and interrupt
+ // the main thead.
+ theTestPassed = true;
+ testGeneratedInterrupt = true;
+ if (mainThread != null){
+ mainThread.interrupt();
+ }
+ }//pass()
+
+ public static synchronized void fail()
+ {
+ //test writer didn't specify why test failed, so give generic
+ fail( "it just plain failed! :-)" );
+ }
+
+ public static synchronized void fail( String whyFailed )
+ {
+ Sysout.println( "The test failed: " + whyFailed );
+ Sysout.println( "The test is over, hit Ctl-C to stop Java VM" );
+ //check if this called from main thread
+ if ( mainThread == Thread.currentThread() )
+ {
+ //If main thread, fail now 'cause not sleeping
+ throw new RuntimeException( whyFailed );
+ }
+ theTestPassed = false;
+ testGeneratedInterrupt = true;
+ failureMessage = whyFailed;
+ mainThread.interrupt();
+ }//fail()
+
+}// class
+
+//This exception is used to exit from any level of call nesting
+// when it's determined that the test has passed, and immediately
+// end the test.
+class TestPassedException extends RuntimeException
+{
+}
+
+//*********** End Standard Test Machinery Section **********
+
+
+//************ Begin classes defined for the test ****************
+
+// make listeners in a class defined here, and instantiate them in init()
+
+/* Example of a class which may be written as part of a test
+class NewClass implements anInterface
+ {
+ static int newVar = 0;
+
+ public void eventDispatched(AWTEvent e)
+ {
+ //Counting events to see if we get enough
+ eventCount++;
+
+ if( eventCount == 20 )
+ {
+ //got enough events, so pass
+
+ ManualMainTest.pass();
+ }
+ else if( tries == 20 )
+ {
+ //tried too many times without getting enough events so fail
+
+ ManualMainTest.fail();
+ }
+
+ }// eventDispatched()
+
+ }// NewClass class
+
+*/
+
+
+//************** End classes defined for the test *******************
+
+
+
+
+/****************************************************
+ Standard Test Machinery
+ DO NOT modify anything below -- it's a standard
+ chunk of code whose purpose is to make user
+ interaction uniform, and thereby make it simpler
+ to read and understand someone else's test.
+ ****************************************************/
+
+/**
+ This is part of the standard test machinery.
+ It creates a dialog (with the instructions), and is the interface
+ for sending text messages to the user.
+ To print the instructions, send an array of strings to Sysout.createDialog
+ WithInstructions method. Put one line of instructions per array entry.
+ To display a message for the tester to see, simply call Sysout.println
+ with the string to be displayed.
+ This mimics System.out.println but works within the test harness as well
+ as standalone.
+ */
+
+class Sysout
+{
+ private static TestDialog dialog;
+ private static boolean numbering = false;
+ private static int messageNumber = 0;
+
+ public static void createDialogWithInstructions( String[] instructions )
+ {
+ dialog = new TestDialog( new Frame(), "Instructions" );
+ dialog.printInstructions( instructions );
+ dialog.setVisible(true);
+ println( "Any messages for the tester will display here." );
+ }
+
+ public static void createDialog( )
+ {
+ dialog = new TestDialog( new Frame(), "Instructions" );
+ String[] defInstr = { "Instructions will appear here. ", "" } ;
+ dialog.printInstructions( defInstr );
+ dialog.setVisible(true);
+ println( "Any messages for the tester will display here." );
+ }
+
+
+ /* Enables message counting for the tester. */
+ public static void enableNumbering(boolean enable){
+ numbering = enable;
+ }
+
+ public static void printInstructions( String[] instructions )
+ {
+ dialog.printInstructions( instructions );
+ }
+
+
+ public static void println( String messageIn )
+ {
+ if (numbering) {
+ messageIn = "" + messageNumber + " " + messageIn;
+ messageNumber++;
+ }
+ dialog.displayMessage( messageIn );
+ }
+
+}// Sysout class
+
+/**
+ This is part of the standard test machinery. It provides a place for the
+ test instructions to be displayed, and a place for interactive messages
+ to the user to be displayed.
+ To have the test instructions displayed, see Sysout.
+ To have a message to the user be displayed, see Sysout.
+ Do not call anything in this dialog directly.
+ */
+class TestDialog extends Dialog implements ActionListener
+{
+
+ TextArea instructionsText;
+ TextArea messageText;
+ int maxStringLength = 80;
+ Panel buttonP = new Panel();
+ Button passB = new Button( "pass" );
+ Button failB = new Button( "fail" );
+
+ //DO NOT call this directly, go through Sysout
+ public TestDialog( Frame frame, String name )
+ {
+ super( frame, name );
+ int scrollBoth = TextArea.SCROLLBARS_BOTH;
+ instructionsText = new TextArea( "", 15, maxStringLength, scrollBoth );
+ add( "North", instructionsText );
+
+ messageText = new TextArea( "", 5, maxStringLength, scrollBoth );
+ add("Center", messageText);
+
+ passB = new Button( "pass" );
+ passB.setActionCommand( "pass" );
+ passB.addActionListener( this );
+ buttonP.add( "East", passB );
+
+ failB = new Button( "fail" );
+ failB.setActionCommand( "fail" );
+ failB.addActionListener( this );
+ buttonP.add( "West", failB );
+
+ add( "South", buttonP );
+ pack();
+
+ setVisible(true);
+ }// TestDialog()
+
+ //DO NOT call this directly, go through Sysout
+ public void printInstructions( String[] instructions )
+ {
+ //Clear out any current instructions
+ instructionsText.setText( "" );
+
+ //Go down array of instruction strings
+
+ String printStr, remainingStr;
+ for( int i=0; i < instructions.length; i++ )
+ {
+ //chop up each into pieces maxSringLength long
+ remainingStr = instructions[ i ];
+ while( remainingStr.length() > 0 )
+ {
+ //if longer than max then chop off first max chars to print
+ if( remainingStr.length() >= maxStringLength )
+ {
+ //Try to chop on a word boundary
+ int posOfSpace = remainingStr.
+ lastIndexOf( ' ', maxStringLength - 1 );
+
+ if( posOfSpace <= 0 ) posOfSpace = maxStringLength - 1;
+
+ printStr = remainingStr.substring( 0, posOfSpace + 1 );
+ remainingStr = remainingStr.substring( posOfSpace + 1 );
+ }
+ //else just print
+ else
+ {
+ printStr = remainingStr;
+ remainingStr = "";
+ }
+
+ instructionsText.append( printStr + "\n" );
+
+ }// while
+
+ }// for
+
+ }//printInstructions()
+
+ //DO NOT call this directly, go through Sysout
+ public void displayMessage( String messageIn )
+ {
+ messageText.append( messageIn + "\n" );
+ System.out.println(messageIn);
+ }
+
+ //catch presses of the passed and failed buttons.
+ //simply call the standard pass() or fail() static methods of
+ //ManualMainTest
+ public void actionPerformed( ActionEvent e )
+ {
+ if( e.getActionCommand() == "pass" )
+ {
+ Test1.pass();
+ }
+ else
+ {
+ Test1.fail();
+ }
+ }
+
+}// TestDialog class