--- a/common/autoconf/generated-configure.sh Thu Feb 27 09:17:58 2014 +0100
+++ b/common/autoconf/generated-configure.sh Thu Feb 27 09:40:35 2014 +0100
@@ -882,8 +882,8 @@
BUILD_LOG_PREVIOUS
BUILD_LOG
SYS_ROOT
+TOPDIR
PATH_SEP
-TOPDIR
ZERO_ARCHDEF
DEFINE_CROSS_COMPILE_ARCH
LP64
@@ -4220,7 +4220,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1393416124
+DATE_WHEN_GENERATED=1393490405
###############################################################################
#
@@ -13869,12 +13869,237 @@
# Continue setting up basic stuff. Most remaining code require fundamental tools.
+ # Save the current directory this script was started from
+ CURDIR="$PWD"
+
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ PATH_SEP=";"
+
+ SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
+ if test $SRC_ROOT_LENGTH -gt 100; then
+ as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
+ fi
+
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin release" >&5
+$as_echo_n "checking cygwin release... " >&6; }
+ CYGWIN_VERSION=`$UNAME -r`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_VERSION" >&5
+$as_echo "$CYGWIN_VERSION" >&6; }
+ WINDOWS_ENV_VENDOR='cygwin'
+ WINDOWS_ENV_VERSION="$CYGWIN_VERSION"
+
+ CYGWIN_VERSION_OK=`$ECHO $CYGWIN_VERSION | $GREP ^1.7.`
+ if test "x$CYGWIN_VERSION_OK" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&5
+$as_echo "$as_me: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+ if test "x$CYGPATH" = x; then
+ as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin root directory as unix-style path" >&5
+$as_echo_n "checking cygwin root directory as unix-style path... " >&6; }
+ # The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
+ cygwin_winpath_root=`cd / ; cmd /c cd | grep ".*"`
+ # Force cygpath to report the proper root by including a trailing space, and then stripping it off again.
+ CYGWIN_ROOT_PATH=`$CYGPATH -u "$cygwin_winpath_root " | $CUT -f 1 -d " "`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_ROOT_PATH" >&5
+$as_echo "$CYGWIN_ROOT_PATH" >&6; }
+ WINDOWS_ENV_ROOT_PATH="$CYGWIN_ROOT_PATH"
+ test_cygdrive_prefix=`$ECHO $CYGWIN_ROOT_PATH | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ as_fn_error $? "Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c." "$LINENO" 5
+ fi
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys release" >&5
+$as_echo_n "checking msys release... " >&6; }
+ MSYS_VERSION=`$UNAME -r`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_VERSION" >&5
+$as_echo "$MSYS_VERSION" >&6; }
+
+ WINDOWS_ENV_VENDOR='msys'
+ WINDOWS_ENV_VERSION="$MSYS_VERSION"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys root directory as unix-style path" >&5
+$as_echo_n "checking msys root directory as unix-style path... " >&6; }
+ # The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
+ MSYS_ROOT_PATH=`cd / ; cmd /c cd | grep ".*"`
+
+ windows_path="$MSYS_ROOT_PATH"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ MSYS_ROOT_PATH="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ MSYS_ROOT_PATH="$unix_path"
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_ROOT_PATH" >&5
+$as_echo "$MSYS_ROOT_PATH" >&6; }
+ WINDOWS_ENV_ROOT_PATH="$MSYS_ROOT_PATH"
+ else
+ as_fn_error $? "Unknown Windows environment. Neither cygwin nor msys was detected." "$LINENO" 5
+ fi
+
+ # Test if windows or unix (cygwin/msys) find is first in path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking what kind of 'find' is first on the PATH" >&5
+$as_echo_n "checking what kind of 'find' is first on the PATH... " >&6; }
+ FIND_BINARY_OUTPUT=`find --version 2>&1`
+ if test "x`echo $FIND_BINARY_OUTPUT | $GREP GNU`" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unix style" >&5
+$as_echo "unix style" >&6; }
+ elif test "x`echo $FIND_BINARY_OUTPUT | $GREP FIND`" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: Windows" >&5
+$as_echo "Windows" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&5
+$as_echo "$as_me: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&5
+$as_echo "$as_me: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
+$as_echo "unknown" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: It seems that your find utility is non-standard." >&5
+$as_echo "$as_me: WARNING: It seems that your find utility is non-standard." >&2;}
+ fi
+
+ else
+ PATH_SEP=":"
+ fi
+
+
# We get the top-level directory from the supporting wrappers.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for top-level directory" >&5
$as_echo_n "checking for top-level directory... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOPDIR" >&5
$as_echo "$TOPDIR" >&6; }
+
+ # We can only call BASIC_FIXUP_PATH after BASIC_CHECK_PATHS_WINDOWS.
+
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$CURDIR"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of CURDIR" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ CURDIR="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$CURDIR"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ CURDIR="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a posix platform. Hooray! :)
+ path="$CURDIR"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of CURDIR, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ CURDIR="`cd "$path"; $THEPWDCMD -L`"
+ fi
+
+
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
# Input might be given as Windows format, start by converting to
@@ -13996,236 +14221,12 @@
TOPDIR="`cd "$path"; $THEPWDCMD -L`"
fi
-
-
# SRC_ROOT is a traditional alias for TOPDIR.
SRC_ROOT=$TOPDIR
# Locate the directory of this script.
AUTOCONF_DIR=$TOPDIR/common/autoconf
- # Save the current directory this script was started from
- CURDIR="$PWD"
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$CURDIR"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of CURDIR" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- CURDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$CURDIR"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- CURDIR="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CURDIR to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting CURDIR to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a posix platform. Hooray! :)
- path="$CURDIR"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CURDIR, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of CURDIR, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of CURDIR, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- CURDIR="`cd "$path"; $THEPWDCMD -L`"
- fi
-
-
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- PATH_SEP=";"
-
- SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
- if test $SRC_ROOT_LENGTH -gt 100; then
- as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
- fi
-
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin release" >&5
-$as_echo_n "checking cygwin release... " >&6; }
- CYGWIN_VERSION=`$UNAME -r`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_VERSION" >&5
-$as_echo "$CYGWIN_VERSION" >&6; }
- WINDOWS_ENV_VENDOR='cygwin'
- WINDOWS_ENV_VERSION="$CYGWIN_VERSION"
-
- CYGWIN_VERSION_OK=`$ECHO $CYGWIN_VERSION | $GREP ^1.7.`
- if test "x$CYGWIN_VERSION_OK" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&5
-$as_echo "$as_me: Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
- if test "x$CYGPATH" = x; then
- as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin root directory as unix-style path" >&5
-$as_echo_n "checking cygwin root directory as unix-style path... " >&6; }
- # The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
- cygwin_winpath_root=`cd / ; cmd /c cd | grep ".*"`
- # Force cygpath to report the proper root by including a trailing space, and then stripping it off again.
- CYGWIN_ROOT_PATH=`$CYGPATH -u "$cygwin_winpath_root " | $CUT -f 1 -d " "`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_ROOT_PATH" >&5
-$as_echo "$CYGWIN_ROOT_PATH" >&6; }
- WINDOWS_ENV_ROOT_PATH="$CYGWIN_ROOT_PATH"
- test_cygdrive_prefix=`$ECHO $CYGWIN_ROOT_PATH | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- as_fn_error $? "Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c." "$LINENO" 5
- fi
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys release" >&5
-$as_echo_n "checking msys release... " >&6; }
- MSYS_VERSION=`$UNAME -r`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_VERSION" >&5
-$as_echo "$MSYS_VERSION" >&6; }
-
- WINDOWS_ENV_VENDOR='msys'
- WINDOWS_ENV_VERSION="$MSYS_VERSION"
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking msys root directory as unix-style path" >&5
-$as_echo_n "checking msys root directory as unix-style path... " >&6; }
- # The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
- MSYS_ROOT_PATH=`cd / ; cmd /c cd | grep ".*"`
-
- windows_path="$MSYS_ROOT_PATH"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- MSYS_ROOT_PATH="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- MSYS_ROOT_PATH="$unix_path"
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSYS_ROOT_PATH" >&5
-$as_echo "$MSYS_ROOT_PATH" >&6; }
- WINDOWS_ENV_ROOT_PATH="$MSYS_ROOT_PATH"
- else
- as_fn_error $? "Unknown Windows environment. Neither cygwin nor msys was detected." "$LINENO" 5
- fi
-
- # Test if windows or unix (cygwin/msys) find is first in path.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking what kind of 'find' is first on the PATH" >&5
-$as_echo_n "checking what kind of 'find' is first on the PATH... " >&6; }
- FIND_BINARY_OUTPUT=`find --version 2>&1`
- if test "x`echo $FIND_BINARY_OUTPUT | $GREP GNU`" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unix style" >&5
-$as_echo "unix style" >&6; }
- elif test "x`echo $FIND_BINARY_OUTPUT | $GREP FIND`" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: Windows" >&5
-$as_echo "Windows" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&5
-$as_echo "$as_me: Your path contains Windows tools (C:\Windows\system32) before your unix (cygwin or msys) tools." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&5
-$as_echo "$as_me: This will not work. Please correct and make sure /usr/bin (or similar) is first in path." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unknown" >&5
-$as_echo "unknown" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: It seems that your find utility is non-standard." >&5
-$as_echo "$as_me: WARNING: It seems that your find utility is non-standard." >&2;}
- fi
-
- else
- PATH_SEP=":"
- fi
-
-
if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
# Add extra search paths on solaris for utilities like ar and as etc...
PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"