8143141: Bring in minor build changes from the jigsaw/jake forest
Reviewed-by: ihse, mchung
--- a/common/autoconf/flags.m4 Tue Nov 24 15:36:32 2015 +0100
+++ b/common/autoconf/flags.m4 Tue Nov 24 15:46:04 2015 +0100
@@ -980,6 +980,19 @@
DISABLE_WARNING_PREFIX=
fi
CFLAGS_WARNINGS_ARE_ERRORS="-Werror"
+ # Repeate the check for the BUILD_CC
+ CC_OLD="$CC"
+ CC="$BUILD_CC"
+ FLAGS_COMPILER_CHECK_ARGUMENTS([-Wno-this-is-a-warning-that-do-not-exist],
+ [BUILD_CC_CAN_DISABLE_WARNINGS=true],
+ [BUILD_CC_CAN_DISABLE_WARNINGS=false]
+ )
+ if test "x$BUILD_CC_CAN_DISABLE_WARNINGS" = "xtrue"; then
+ BUILD_CC_DISABLE_WARNING_PREFIX="-Wno-"
+ else
+ BUILD_CC_DISABLE_WARNING_PREFIX=
+ fi
+ CC="$CC_OLD"
;;
clang)
DISABLE_WARNING_PREFIX="-Wno-"
--- a/common/autoconf/generated-configure.sh Tue Nov 24 15:36:32 2015 +0100
+++ b/common/autoconf/generated-configure.sh Tue Nov 24 15:46:04 2015 +0100
@@ -744,7 +744,10 @@
HOTSPOT_CXX
HOTSPOT_RC
HOTSPOT_MT
+BUILD_AS
BUILD_LD
+BUILD_AR
+BUILD_NM
BUILD_CXX
BUILD_CC
BUILD_SYSROOT_LDFLAGS
@@ -1215,6 +1218,8 @@
OBJDUMP
BUILD_CC
BUILD_CXX
+BUILD_NM
+BUILD_AR
JTREGEXE
XMKMF
FREETYPE_CFLAGS
@@ -2103,6 +2108,8 @@
OBJDUMP Override default value for OBJDUMP
BUILD_CC Override default value for BUILD_CC
BUILD_CXX Override default value for BUILD_CXX
+ BUILD_NM Override default value for BUILD_NM
+ BUILD_AR Override default value for BUILD_AR
JTREGEXE Override default value for JTREGEXE
XMKMF Path to xmkmf, Makefile generator for X Window System
FREETYPE_CFLAGS
@@ -4612,7 +4619,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1448375773
+DATE_WHEN_GENERATED=1448376134
###############################################################################
#
@@ -35696,6 +35703,314 @@
fi
+ elif test "x$TOOLCHAIN_TYPE" = xgcc; then
+
+
+ # Publish this variable in the help.
+
+
+ if [ -z "${AR+x}" ]; then
+ # The variable is not set by user, try to locate tool using the code snippet
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar gcc-ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar gcc-ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+ else
+ # The variable is set, but is it from the command line or the environment?
+
+ # Try to remove the string !AR! from our list.
+ try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!AR!/}
+ if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
+ # If it failed, the variable was not from the command line. Ignore it,
+ # but warn the user (except for BASH, which is always set by the calling BASH).
+ if test "xAR" != xBASH; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&5
+$as_echo "$as_me: WARNING: Ignoring value of AR from the environment. Use command line variables instead." >&2;}
+ fi
+ # Try to locate tool using the code snippet
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar gcc-ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar gcc-ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+ else
+ # If it succeeded, then it was overridden by the user. We will use it
+ # for the tool.
+
+ # First remove it from the list of overridden variables, so we can test
+ # for unknown variables in the end.
+ CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
+
+ # Check if we try to supply an empty value
+ if test "x$AR" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool AR= (no value)" >&5
+$as_echo "$as_me: Setting user supplied tool AR= (no value)" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
+$as_echo_n "checking for AR... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
+$as_echo "disabled" >&6; }
+ else
+ # Check if the provided tool contains a complete path.
+ tool_specified="$AR"
+ tool_basename="${tool_specified##*/}"
+ if test "x$tool_basename" = "x$tool_specified"; then
+ # A command without a complete path is provided, search $PATH.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool AR=$tool_basename" >&5
+$as_echo "$as_me: Will search for user supplied tool AR=$tool_basename" >&6;}
+ # Extract the first word of "$tool_basename", so it can be a program name with args.
+set dummy $tool_basename; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $AR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_AR="$AR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_AR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+AR=$ac_cv_path_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$AR" = x; then
+ as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
+ fi
+ else
+ # Otherwise we believe it is a complete path. Use it as it is.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool AR=$tool_specified" >&5
+$as_echo "$as_me: Will use user supplied tool AR=$tool_specified" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for AR" >&5
+$as_echo_n "checking for AR... " >&6; }
+ if test ! -x "$tool_specified"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ as_fn_error $? "User supplied tool AR=$tool_specified does not exist or is not executable" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
+$as_echo "$tool_specified" >&6; }
+ fi
+ fi
+ fi
+
+ fi
+
+
else
@@ -39875,6 +40190,315 @@
fi
fi
+ if test "x$TOOLCHAIN_TYPE" = xgcc; then
+
+
+ # Publish this variable in the help.
+
+
+ if [ -z "${NM+x}" ]; then
+ # The variable is not set by user, try to locate tool using the code snippet
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in nm gcc-nm
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$NM" && break
+ done
+fi
+if test -z "$NM"; then
+ ac_ct_NM=$NM
+ for ac_prog in nm gcc-nm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NM"; then
+ ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NM="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NM=$ac_cv_prog_ac_ct_NM
+if test -n "$ac_ct_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
+$as_echo "$ac_ct_NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_NM" && break
+done
+
+ if test "x$ac_ct_NM" = x; then
+ NM=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NM=$ac_ct_NM
+ fi
+fi
+
+ else
+ # The variable is set, but is it from the command line or the environment?
+
+ # Try to remove the string !NM! from our list.
+ try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!NM!/}
+ if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
+ # If it failed, the variable was not from the command line. Ignore it,
+ # but warn the user (except for BASH, which is always set by the calling BASH).
+ if test "xNM" != xBASH; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&5
+$as_echo "$as_me: WARNING: Ignoring value of NM from the environment. Use command line variables instead." >&2;}
+ fi
+ # Try to locate tool using the code snippet
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in nm gcc-nm
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ ac_cv_prog_NM="$NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NM="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NM=$ac_cv_prog_NM
+if test -n "$NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$NM" && break
+ done
+fi
+if test -z "$NM"; then
+ ac_ct_NM=$NM
+ for ac_prog in nm gcc-nm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NM"; then
+ ac_cv_prog_ac_ct_NM="$ac_ct_NM" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NM="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NM=$ac_cv_prog_ac_ct_NM
+if test -n "$ac_ct_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NM" >&5
+$as_echo "$ac_ct_NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_NM" && break
+done
+
+ if test "x$ac_ct_NM" = x; then
+ NM=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NM=$ac_ct_NM
+ fi
+fi
+
+ else
+ # If it succeeded, then it was overridden by the user. We will use it
+ # for the tool.
+
+ # First remove it from the list of overridden variables, so we can test
+ # for unknown variables in the end.
+ CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
+
+ # Check if we try to supply an empty value
+ if test "x$NM" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool NM= (no value)" >&5
+$as_echo "$as_me: Setting user supplied tool NM= (no value)" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
+$as_echo_n "checking for NM... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
+$as_echo "disabled" >&6; }
+ else
+ # Check if the provided tool contains a complete path.
+ tool_specified="$NM"
+ tool_basename="${tool_specified##*/}"
+ if test "x$tool_basename" = "x$tool_specified"; then
+ # A command without a complete path is provided, search $PATH.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool NM=$tool_basename" >&5
+$as_echo "$as_me: Will search for user supplied tool NM=$tool_basename" >&6;}
+ # Extract the first word of "$tool_basename", so it can be a program name with args.
+set dummy $tool_basename; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $NM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_NM="$NM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_NM="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+NM=$ac_cv_path_NM
+if test -n "$NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NM" >&5
+$as_echo "$NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$NM" = x; then
+ as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
+ fi
+ else
+ # Otherwise we believe it is a complete path. Use it as it is.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool NM=$tool_specified" >&5
+$as_echo "$as_me: Will use user supplied tool NM=$tool_specified" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for NM" >&5
+$as_echo_n "checking for NM... " >&6; }
+ if test ! -x "$tool_specified"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ as_fn_error $? "User supplied tool NM=$tool_specified does not exist or is not executable" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
+$as_echo "$tool_specified" >&6; }
+ fi
+ fi
+ fi
+
+ fi
+
+
+ else
# Publish this variable in the help.
@@ -40182,6 +40806,7 @@
fi
+ fi
# Only process if variable expands to non-empty
@@ -42957,6 +43582,975 @@
fi
fi
+
+
+ # Publish this variable in the help.
+
+
+ if [ -z "${BUILD_NM+x}" ]; then
+ # The variable is not set by user, try to locate tool using the code snippet
+ for ac_prog in nm gcc-nm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_NM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_NM=$ac_cv_path_BUILD_NM
+if test -n "$BUILD_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
+$as_echo "$BUILD_NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_NM" && break
+done
+
+ else
+ # The variable is set, but is it from the command line or the environment?
+
+ # Try to remove the string !BUILD_NM! from our list.
+ try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_NM!/}
+ if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
+ # If it failed, the variable was not from the command line. Ignore it,
+ # but warn the user (except for BASH, which is always set by the calling BASH).
+ if test "xBUILD_NM" != xBASH; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_NM from the environment. Use command line variables instead." >&5
+$as_echo "$as_me: WARNING: Ignoring value of BUILD_NM from the environment. Use command line variables instead." >&2;}
+ fi
+ # Try to locate tool using the code snippet
+ for ac_prog in nm gcc-nm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_NM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_NM=$ac_cv_path_BUILD_NM
+if test -n "$BUILD_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
+$as_echo "$BUILD_NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_NM" && break
+done
+
+ else
+ # If it succeeded, then it was overridden by the user. We will use it
+ # for the tool.
+
+ # First remove it from the list of overridden variables, so we can test
+ # for unknown variables in the end.
+ CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
+
+ # Check if we try to supply an empty value
+ if test "x$BUILD_NM" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_NM= (no value)" >&5
+$as_echo "$as_me: Setting user supplied tool BUILD_NM= (no value)" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_NM" >&5
+$as_echo_n "checking for BUILD_NM... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
+$as_echo "disabled" >&6; }
+ else
+ # Check if the provided tool contains a complete path.
+ tool_specified="$BUILD_NM"
+ tool_basename="${tool_specified##*/}"
+ if test "x$tool_basename" = "x$tool_specified"; then
+ # A command without a complete path is provided, search $PATH.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_NM=$tool_basename" >&5
+$as_echo "$as_me: Will search for user supplied tool BUILD_NM=$tool_basename" >&6;}
+ # Extract the first word of "$tool_basename", so it can be a program name with args.
+set dummy $tool_basename; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_NM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_NM="$BUILD_NM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_NM="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_NM=$ac_cv_path_BUILD_NM
+if test -n "$BUILD_NM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_NM" >&5
+$as_echo "$BUILD_NM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$BUILD_NM" = x; then
+ as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
+ fi
+ else
+ # Otherwise we believe it is a complete path. Use it as it is.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_NM=$tool_specified" >&5
+$as_echo "$as_me: Will use user supplied tool BUILD_NM=$tool_specified" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_NM" >&5
+$as_echo_n "checking for BUILD_NM... " >&6; }
+ if test ! -x "$tool_specified"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ as_fn_error $? "User supplied tool BUILD_NM=$tool_specified does not exist or is not executable" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
+$as_echo "$tool_specified" >&6; }
+ fi
+ fi
+ fi
+
+ fi
+
+
+
+ # Only process if variable expands to non-empty
+
+ if test "x$BUILD_NM" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_NM"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ new_path=`$CYGPATH -u "$path"`
+
+ # Now try to locate executable using which
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in cygwin causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path=`$CYGPATH -u "$path"`
+ fi
+ if test "x$new_path" = x; then
+ # Oops. Which didn't find the executable.
+ # The splitting of arguments from the executable at a space might have been incorrect,
+ # since paths with space are more likely in Windows. Give it another try with the whole
+ # argument.
+ path="$complete"
+ arguments="EOL"
+ new_path=`$CYGPATH -u "$path"`
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in cygwin causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path=`$CYGPATH -u "$path"`
+ fi
+ if test "x$new_path" = x; then
+ # It's still not found. Now this is an unrecoverable error.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
+$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
+ fi
+ fi
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file presence.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ # Short path failed, file does not exist as specified.
+ # Try adding .exe or .cmd
+ if test -f "${new_path}.exe"; then
+ input_to_shortpath="${new_path}.exe"
+ elif test -f "${new_path}.cmd"; then
+ input_to_shortpath="${new_path}.cmd"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$new_path\", is invalid." >&5
+$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$new_path\", is invalid." >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
+$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
+ as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
+ fi
+ else
+ input_to_shortpath="$new_path"
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+ new_path="$input_to_shortpath"
+
+ input_path="$input_to_shortpath"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+ # remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_NM"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+
+ # Now try to locate executable using which
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+
+ if test "x$new_path" = x; then
+ # Oops. Which didn't find the executable.
+ # The splitting of arguments from the executable at a space might have been incorrect,
+ # since paths with space are more likely in Windows. Give it another try with the whole
+ # argument.
+ path="$complete"
+ arguments="EOL"
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in MSYS causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ fi
+
+ if test "x$new_path" = x; then
+ # It's still not found. Now this is an unrecoverable error.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
+$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
+ fi
+ fi
+
+ # Now new_path has a complete unix path to the binary
+ if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
+ # Keep paths in /bin as-is, but remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+ # Do not save /bin paths to all_fixpath_prefixes!
+ else
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $new_path`
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+ # Output is in $new_path
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ # remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+ fi
+
+ else
+ # We're on a unix platform. Hooray! :)
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_NM"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ # This is an absolute path, we can use it without further modifications.
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_NM, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_NM" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
+
+ if test "x$complete" != "x$new_complete"; then
+ BUILD_NM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_NM to \"$new_complete\"" >&5
+$as_echo "$as_me: Rewriting BUILD_NM to \"$new_complete\"" >&6;}
+ fi
+ fi
+
+
+
+ # Publish this variable in the help.
+
+
+ if [ -z "${BUILD_AR+x}" ]; then
+ # The variable is not set by user, try to locate tool using the code snippet
+ for ac_prog in ar gcc-ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_AR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_AR=$ac_cv_path_BUILD_AR
+if test -n "$BUILD_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
+$as_echo "$BUILD_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_AR" && break
+done
+
+ else
+ # The variable is set, but is it from the command line or the environment?
+
+ # Try to remove the string !BUILD_AR! from our list.
+ try_remove_var=${CONFIGURE_OVERRIDDEN_VARIABLES//!BUILD_AR!/}
+ if test "x$try_remove_var" = "x$CONFIGURE_OVERRIDDEN_VARIABLES"; then
+ # If it failed, the variable was not from the command line. Ignore it,
+ # but warn the user (except for BASH, which is always set by the calling BASH).
+ if test "xBUILD_AR" != xBASH; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring value of BUILD_AR from the environment. Use command line variables instead." >&5
+$as_echo "$as_me: WARNING: Ignoring value of BUILD_AR from the environment. Use command line variables instead." >&2;}
+ fi
+ # Try to locate tool using the code snippet
+ for ac_prog in ar gcc-ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_AR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_AR=$ac_cv_path_BUILD_AR
+if test -n "$BUILD_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
+$as_echo "$BUILD_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_AR" && break
+done
+
+ else
+ # If it succeeded, then it was overridden by the user. We will use it
+ # for the tool.
+
+ # First remove it from the list of overridden variables, so we can test
+ # for unknown variables in the end.
+ CONFIGURE_OVERRIDDEN_VARIABLES="$try_remove_var"
+
+ # Check if we try to supply an empty value
+ if test "x$BUILD_AR" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting user supplied tool BUILD_AR= (no value)" >&5
+$as_echo "$as_me: Setting user supplied tool BUILD_AR= (no value)" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_AR" >&5
+$as_echo_n "checking for BUILD_AR... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: disabled" >&5
+$as_echo "disabled" >&6; }
+ else
+ # Check if the provided tool contains a complete path.
+ tool_specified="$BUILD_AR"
+ tool_basename="${tool_specified##*/}"
+ if test "x$tool_basename" = "x$tool_specified"; then
+ # A command without a complete path is provided, search $PATH.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will search for user supplied tool BUILD_AR=$tool_basename" >&5
+$as_echo "$as_me: Will search for user supplied tool BUILD_AR=$tool_basename" >&6;}
+ # Extract the first word of "$tool_basename", so it can be a program name with args.
+set dummy $tool_basename; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_BUILD_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_AR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_AR="$BUILD_AR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_BUILD_AR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_AR=$ac_cv_path_BUILD_AR
+if test -n "$BUILD_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_AR" >&5
+$as_echo "$BUILD_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test "x$BUILD_AR" = x; then
+ as_fn_error $? "User supplied tool $tool_basename could not be found" "$LINENO" 5
+ fi
+ else
+ # Otherwise we believe it is a complete path. Use it as it is.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will use user supplied tool BUILD_AR=$tool_specified" >&5
+$as_echo "$as_me: Will use user supplied tool BUILD_AR=$tool_specified" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for BUILD_AR" >&5
+$as_echo_n "checking for BUILD_AR... " >&6; }
+ if test ! -x "$tool_specified"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ as_fn_error $? "User supplied tool BUILD_AR=$tool_specified does not exist or is not executable" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $tool_specified" >&5
+$as_echo "$tool_specified" >&6; }
+ fi
+ fi
+ fi
+
+ fi
+
+
+
+ # Only process if variable expands to non-empty
+
+ if test "x$BUILD_AR" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_AR"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ new_path=`$CYGPATH -u "$path"`
+
+ # Now try to locate executable using which
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in cygwin causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path=`$CYGPATH -u "$path"`
+ fi
+ if test "x$new_path" = x; then
+ # Oops. Which didn't find the executable.
+ # The splitting of arguments from the executable at a space might have been incorrect,
+ # since paths with space are more likely in Windows. Give it another try with the whole
+ # argument.
+ path="$complete"
+ arguments="EOL"
+ new_path=`$CYGPATH -u "$path"`
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in cygwin causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path=`$CYGPATH -u "$path"`
+ fi
+ if test "x$new_path" = x; then
+ # It's still not found. Now this is an unrecoverable error.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
+$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
+ fi
+ fi
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file presence.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ # Short path failed, file does not exist as specified.
+ # Try adding .exe or .cmd
+ if test -f "${new_path}.exe"; then
+ input_to_shortpath="${new_path}.exe"
+ elif test -f "${new_path}.cmd"; then
+ input_to_shortpath="${new_path}.cmd"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$new_path\", is invalid." >&5
+$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$new_path\", is invalid." >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&5
+$as_echo "$as_me: Neither \"$new_path\" nor \"$new_path.exe/cmd\" can be found" >&6;}
+ as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
+ fi
+ else
+ input_to_shortpath="$new_path"
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+ new_path="$input_to_shortpath"
+
+ input_path="$input_to_shortpath"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $input_to_shortpath | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+ # remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_AR"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+
+ # Now try to locate executable using which
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+
+ if test "x$new_path" = x; then
+ # Oops. Which didn't find the executable.
+ # The splitting of arguments from the executable at a space might have been incorrect,
+ # since paths with space are more likely in Windows. Give it another try with the whole
+ # argument.
+ path="$complete"
+ arguments="EOL"
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+
+ new_path=`$WHICH "$new_path" 2> /dev/null`
+ # bat and cmd files are not always considered executable in MSYS causing which
+ # to not find them
+ if test "x$new_path" = x \
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ new_path="$path"
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ fi
+
+ if test "x$new_path" = x; then
+ # It's still not found. Now this is an unrecoverable error.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You might be mixing spaces in the path and extra arguments, which is not allowed." >&5
+$as_echo "$as_me: You might be mixing spaces in the path and extra arguments, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
+ fi
+ fi
+
+ # Now new_path has a complete unix path to the binary
+ if test "x`$ECHO $new_path | $GREP ^/bin/`" != x; then
+ # Keep paths in /bin as-is, but remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+ # Do not save /bin paths to all_fixpath_prefixes!
+ else
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $new_path`
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+ # Output is in $new_path
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ # remove trailing .exe if any
+ new_path="${new_path/%.exe/}"
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+ fi
+
+ else
+ # We're on a unix platform. Hooray! :)
+ # First separate the path from the arguments. This will split at the first
+ # space.
+ complete="$BUILD_AR"
+ path="${complete%% *}"
+ tmp="$complete EOL"
+ arguments="${tmp#* }"
+
+ # Cannot rely on the command "which" here since it doesn't always work.
+ is_absolute_path=`$ECHO "$path" | $GREP ^/`
+ if test -z "$is_absolute_path"; then
+ # Path to executable is not absolute. Find it.
+ IFS_save="$IFS"
+ IFS=:
+ for p in $PATH; do
+ if test -f "$p/$path" && test -x "$p/$path"; then
+ new_path="$p/$path"
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ else
+ # This is an absolute path, we can use it without further modifications.
+ new_path="$path"
+ fi
+
+ if test "x$new_path" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&5
+$as_echo "$as_me: The path of BUILD_AR, which resolves as \"$complete\", is not found." >&6;}
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_AR" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
+
+ if test "x$complete" != "x$new_complete"; then
+ BUILD_AR="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_AR to \"$new_complete\"" >&5
+$as_echo "$as_me: Rewriting BUILD_AR to \"$new_complete\"" >&6;}
+ fi
+ fi
+
+ # Assume the C compiler is the assembler
+ BUILD_AS="$BUILD_CC -c"
+ # Just like for the target compiler, use the compiler as linker
BUILD_LD="$BUILD_CC"
PATH="$OLDPATH"
@@ -42966,9 +44560,15 @@
BUILD_CC="$CC"
BUILD_CXX="$CXX"
BUILD_LD="$LD"
+ BUILD_NM="$NM"
+ BUILD_AS="$AS"
BUILD_SYSROOT_CFLAGS="$SYSROOT_CFLAGS"
BUILD_SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS"
- fi
+ BUILD_AR="$AR"
+ fi
+
+
+
@@ -45296,6 +46896,81 @@
DISABLE_WARNING_PREFIX=
fi
CFLAGS_WARNINGS_ARE_ERRORS="-Werror"
+ # Repeate the check for the BUILD_CC
+ CC_OLD="$CC"
+ CC="$BUILD_CC"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"" >&5
+$as_echo_n "checking if compiler supports \"-Wno-this-is-a-warning-that-do-not-exist\"... " >&6; }
+ supports=yes
+
+ saved_cflags="$CFLAGS"
+ CFLAGS="$CFLAGS -Wno-this-is-a-warning-that-do-not-exist"
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int i;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ supports=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ CFLAGS="$saved_cflags"
+
+ saved_cxxflags="$CXXFLAGS"
+ CXXFLAGS="$CXXFLAG -Wno-this-is-a-warning-that-do-not-exist"
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int i;
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+ supports=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ CXXFLAGS="$saved_cxxflags"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $supports" >&5
+$as_echo "$supports" >&6; }
+ if test "x$supports" = "xyes" ; then
+ BUILD_CC_CAN_DISABLE_WARNINGS=true
+ else
+ BUILD_CC_CAN_DISABLE_WARNINGS=false
+
+ fi
+
+ if test "x$BUILD_CC_CAN_DISABLE_WARNINGS" = "xtrue"; then
+ BUILD_CC_DISABLE_WARNING_PREFIX="-Wno-"
+ else
+ BUILD_CC_DISABLE_WARNING_PREFIX=
+ fi
+ CC="$CC_OLD"
;;
clang)
DISABLE_WARNING_PREFIX="-Wno-"
--- a/common/autoconf/spec.gmk.in Tue Nov 24 15:36:32 2015 +0100
+++ b/common/autoconf/spec.gmk.in Tue Nov 24 15:46:04 2015 +0100
@@ -361,7 +361,11 @@
# BUILD_CC/BUILD_LD is a compiler/linker that generates code that is runnable on the
# build platform.
BUILD_CC:=@FIXPATH@ @BUILD_CC@
+BUILD_CXX:=@FIXPATH@ @BUILD_CXX@
BUILD_LD:=@FIXPATH@ @BUILD_LD@
+BUILD_AS:=@FIXPATH@ @BUILD_AS@
+BUILD_AR:=@FIXPATH@ @BUILD_AR@
+BUILD_NM:=@FIXPATH@ @BUILD_NM@
BUILD_SYSROOT_CFLAGS:=@BUILD_SYSROOT_CFLAGS@
BUILD_SYSROOT_LDFLAGS:=@BUILD_SYSROOT_LDFLAGS@
--- a/common/autoconf/toolchain.m4 Tue Nov 24 15:36:32 2015 +0100
+++ b/common/autoconf/toolchain.m4 Tue Nov 24 15:46:04 2015 +0100
@@ -539,6 +539,8 @@
if test "x$TOOLCHAIN_TYPE" = xmicrosoft; then
# The corresponding ar tool is lib.exe (used to create static libraries)
AC_CHECK_PROG([AR], [lib],[lib],,,)
+ elif test "x$TOOLCHAIN_TYPE" = xgcc; then
+ BASIC_CHECK_TOOLS(AR, ar gcc-ar)
else
BASIC_CHECK_TOOLS(AR, ar)
fi
@@ -584,7 +586,11 @@
# FIXME: we should unify this with the solaris case above.
BASIC_CHECK_TOOLS(STRIP, strip)
BASIC_FIXUP_EXECUTABLE(STRIP)
- BASIC_CHECK_TOOLS(NM, nm)
+ if test "x$TOOLCHAIN_TYPE" = xgcc; then
+ BASIC_CHECK_TOOLS(NM, nm gcc-nm)
+ else
+ BASIC_CHECK_TOOLS(NM, nm)
+ fi
BASIC_FIXUP_EXECUTABLE(NM)
GNM="$NM"
AC_SUBST(GNM)
@@ -717,6 +723,13 @@
BASIC_FIXUP_EXECUTABLE(BUILD_CC)
BASIC_REQUIRE_PROGS(BUILD_CXX, [cl CC g++])
BASIC_FIXUP_EXECUTABLE(BUILD_CXX)
+ BASIC_PATH_PROGS(BUILD_NM, nm gcc-nm)
+ BASIC_FIXUP_EXECUTABLE(BUILD_NM)
+ BASIC_PATH_PROGS(BUILD_AR, ar gcc-ar)
+ BASIC_FIXUP_EXECUTABLE(BUILD_AR)
+ # Assume the C compiler is the assembler
+ BUILD_AS="$BUILD_CC -c"
+ # Just like for the target compiler, use the compiler as linker
BUILD_LD="$BUILD_CC"
PATH="$OLDPATH"
@@ -726,15 +739,21 @@
BUILD_CC="$CC"
BUILD_CXX="$CXX"
BUILD_LD="$LD"
+ BUILD_NM="$NM"
+ BUILD_AS="$AS"
BUILD_SYSROOT_CFLAGS="$SYSROOT_CFLAGS"
BUILD_SYSROOT_LDFLAGS="$SYSROOT_LDFLAGS"
+ BUILD_AR="$AR"
fi
AC_SUBST(BUILD_CC)
AC_SUBST(BUILD_CXX)
AC_SUBST(BUILD_LD)
+ AC_SUBST(BUILD_NM)
+ AC_SUBST(BUILD_AS)
AC_SUBST(BUILD_SYSROOT_CFLAGS)
AC_SUBST(BUILD_SYSROOT_LDFLAGS)
+ AC_SUBST(BUILD_AR)
])
# Setup legacy variables that are still needed as alternative ways to refer to
--- a/make/CompileJavaModules.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/CompileJavaModules.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -475,33 +475,29 @@
jdk.localedata_EXCLUDE_FILES += sun/text/resources/th/BreakIteratorRules_th.java
################################################################################
-# Setup the compilation of each module
-#
-# Do not include nashorn src here since it needs to be compiled separately due
-# to nasgen.
+# Setup the compilation for the module
#
# Order src dirs in order of override with the most important first. Generated
# source before static source and platform specific source before shared.
#
-# To use this variable, use $(call ALL_SRC_DIRS,module) with no space.
GENERATED_SRC_DIRS += \
- $(SUPPORT_OUTPUTDIR)/gensrc/$1 \
- $(SUPPORT_OUTPUTDIR)/gensrc_no_docs/$1 \
+ $(SUPPORT_OUTPUTDIR)/gensrc/$(MODULE) \
+ $(SUPPORT_OUTPUTDIR)/gensrc_no_docs/$(MODULE) \
#
-OS_SRC_DIRS += $(JDK_TOPDIR)/src/$1/$(OPENJDK_TARGET_OS)/classes
+OS_SRC_DIRS += $(JDK_TOPDIR)/src/$(MODULE)/$(OPENJDK_TARGET_OS)/classes
ifneq ($(OPENJDK_TARGET_OS), $(OPENJDK_TARGET_OS_TYPE))
- OS_TYPE_SRC_DIRS += $(JDK_TOPDIR)/src/$1/$(OPENJDK_TARGET_OS_TYPE)/classes
+ OS_TYPE_SRC_DIRS += $(JDK_TOPDIR)/src/$(MODULE)/$(OPENJDK_TARGET_OS_TYPE)/classes
endif
SHARE_SRC_DIRS += \
- $(HOTSPOT_TOPDIR)/src/$1/share/classes \
- $(JDK_TOPDIR)/src/$1/share/classes \
- $(LANGTOOLS_TOPDIR)/src/$1/share/classes \
- $(CORBA_TOPDIR)/src/$1/share/classes \
- $(JAXP_TOPDIR)/src/$1/share/classes \
- $(JAXWS_TOPDIR)/src/$1/share/classes \
- $(NASHORN_TOPDIR)/src/$1/share/classes \
+ $(HOTSPOT_TOPDIR)/src/$(MODULE)/share/classes \
+ $(JDK_TOPDIR)/src/$(MODULE)/share/classes \
+ $(LANGTOOLS_TOPDIR)/src/$(MODULE)/share/classes \
+ $(CORBA_TOPDIR)/src/$(MODULE)/share/classes \
+ $(JAXP_TOPDIR)/src/$(MODULE)/share/classes \
+ $(JAXWS_TOPDIR)/src/$(MODULE)/share/classes \
+ $(NASHORN_TOPDIR)/src/$(MODULE)/share/classes \
#
ALL_SRC_DIRS = \
@@ -511,11 +507,6 @@
$(SHARE_SRC_DIRS) \
#
-# Find all modules with java sources. Filter out nashorn since it needs to be
-# compiled separately.
-ALL_JAVA_MODULES := $(filter-out jdk.scripting.nashorn, $(call FindJavaModules))
-JAVA_MODULES := $(ALL_JAVA_MODULES)
-
# The JDK_USER_DEFINED_FILTER is a poor man's incremental build: by specifying
# JDK_FILTER at the make command line, only a subset of the JDK java files will
# be recompiled. If multiple paths are separated by comma, convert that into a
@@ -526,50 +517,39 @@
EMPTY_DIR := $(SUPPORT_OUTPUTDIR)/empty-dir
$(call MakeDir, $(EMPTY_DIR))
-# This macro sets up compilation of a module and declares dependencies for it.
-# Param 1 - module name
-define SetupModuleCompilation
- # Find the module dependencies by parsing modules.list file
- $1_DEPS := $$(call FindDepsForModule, $1)
+# Find the module dependencies by parsing modules.list file
+DEPS := $(call FindDepsForModule, $(MODULE))
- $1_CLASSPATH := $$(foreach d,$$($1_DEPS), $$(if $$($$d_BIN), $$($$d_BIN), \
- $(JDK_OUTPUTDIR)/modules/$$d))
- # When crypto classes are prebuilt, need to look for classes already in
- # output dir.
- ifneq ($(BUILD_CRYPTO), true)
- $1_CLASSPATH += $(JDK_OUTPUTDIR)/modules/$1
- endif
- ifeq ($1, jdk.hotspot.agent)
- ## The source of this module is compiled elsewhere, hotspot, and imported.
- ## Service types are required in the classpath when compiing module-info
- $1_CLASSPATH := $$($1_CLASSPATH) $$(addprefix $(JDK_OUTPUTDIR)/modules/,jdk.hotspot.agent)
- endif
- $1_JAVAC_FLAGS := -bootclasspath $(EMPTY_DIR) -extdirs $(EMPTY_DIR) -endorseddirs $(EMPTY_DIR) $$($1_ADD_JAVAC_FLAGS)
+CLASSPATH := $(foreach d, $(DEPS), $(if $($d_BIN), $($d_BIN), \
+ $(JDK_OUTPUTDIR)/modules/$d))
+# When crypto classes are prebuilt, need to look for classes already in
+# output dir.
+ifneq ($(BUILD_CRYPTO), true)
+ CLASSPATH += $(JDK_OUTPUTDIR)/modules/$(MODULE)
+endif
+JAVAC_FLAGS := -bootclasspath $(EMPTY_DIR) -extdirs $(EMPTY_DIR) \
+ -endorseddirs $(EMPTY_DIR) $($(MODULE)_ADD_JAVAC_FLAGS)
- $$(eval $$(call SetupJavaCompilation,$1, \
- SETUP := $$(if $$($1_SETUP), $$($1_SETUP), GENERATE_JDKBYTECODE), \
- SRC := $$(if $$($1_SRC), $$($1_SRC), $$(wildcard $$(call ALL_SRC_DIRS,$1))), \
- INCLUDES := $(JDK_USER_DEFINED_FILTER),\
- BIN := $$(if $$($1_BIN), $$($1_BIN), $(JDK_OUTPUTDIR)/modules/$1), \
- HEADERS := $(SUPPORT_OUTPUTDIR)/headers/$1, \
- CLASSPATH := $$($1_CLASSPATH), \
- ADD_JAVAC_FLAGS := $$($1_ADD_JAVAC_FLAGS) $$($1_JAVAC_FLAGS)))
-
- $1: $$($1) $$($1_COPY_EXTRA)
+$(eval $(call SetupJavaCompilation, $(MODULE), \
+ SETUP := $(if $($(MODULE)_SETUP), $($(MODULE)_SETUP), GENERATE_JDKBYTECODE), \
+ SRC := $(if $($(MODULE)_SRC), $($(MODULE)_SRC), $(wildcard $(ALL_SRC_DIRS))), \
+ INCLUDES := $(JDK_USER_DEFINED_FILTER),\
+ BIN := $(if $($(MODULE)_BIN), $($(MODULE)_BIN), $(JDK_OUTPUTDIR)/modules/$(MODULE)), \
+ HEADERS := $(SUPPORT_OUTPUTDIR)/headers/$(MODULE), \
+ CLASSPATH := $(CLASSPATH), \
+ ADD_JAVAC_FLAGS := $($(MODULE)_ADD_JAVAC_FLAGS) $(JAVAC_FLAGS) \
+))
- # Declare dependencies between java compilation of different modules.
- # Since not all modules have been declared yet, or might be declared
- # in different invocations of this file, use the macro to find the
- # correct target file to depend on.
- # Only the javac compilation actually depends on other modules so limit
- # dependency declaration to that by using the *_COMPILE_TARGET variable.
- $$($1_COMPILE_TARGETS): $$(foreach d,$$($1_DEPS), \
- $$(call SetupJavaCompilationCompileTarget, $$d, \
- $$(if $$($$d_BIN), $$($$d_BIN), $(JDK_OUTPUTDIR)/modules/$$d)))
-endef
+TARGETS += $($(MODULE)) $($(MODULE)_COPY_EXTRA)
-# Setup compilation for each module
-$(foreach m,$(JAVA_MODULES),$(eval $(call SetupModuleCompilation,$m)))
+# Declare dependencies between java compilations of different modules.
+# Since the other modules are declared in different invocations of this file,
+# use the macro to find the correct target file to depend on.
+# Only the javac compilation actually depends on other modules so limit
+# dependency declaration to that by using the *_COMPILE_TARGET variable.
+$($(MODULE)_COMPILE_TARGET): $(foreach d, $($(MODULE)_DEPS), \
+ $(call SetupJavaCompilationCompileTarget, $d, \
+ $(if $($d_BIN), $($d_BIN), $(JDK_OUTPUTDIR)/modules/$d)))
################################################################################
# Copy zh_HK properties files from zh_TW
@@ -577,15 +557,21 @@
$(JDK_OUTPUTDIR)/modules/%_zh_HK.properties: $(JDK_OUTPUTDIR)/modules/%_zh_TW.properties
$(install-file)
-define CreateHkTargets
- $(patsubst $(JDK_TOPDIR)/src/%, $(JDK_OUTPUTDIR)/modules/%, \
- $(subst /share/classes,, \
- $(subst _zh_TW,_zh_HK, $(filter %_zh_TW.properties, $1))))
-endef
+CreateHkTargets = \
+ $(patsubst $(JDK_TOPDIR)/src/%, $(JDK_OUTPUTDIR)/modules/%, \
+ $(subst /share/classes,, \
+ $(subst _zh_TW,_zh_HK, $(filter %_zh_TW.properties, $1))))
+
+ifeq ($(MODULE), java.sql.rowset)
+ TARGETS += $(call CreateHkTargets, $(java.sql.rowset_CLEAN_FILES))
+endif
-java.sql.rowset: $(call CreateHkTargets, $(java.sql.rowset_CLEAN_FILES))
-java.rmi: $(call CreateHkTargets, $(java.rmi_CLEAN_FILES))
+ifeq ($(MODULE), java.rmi)
+ TARGETS += $(call CreateHkTargets, $(java.rmi_CLEAN_FILES))
+endif
-all: $(JAVA_MODULES)
+################################################################################
-.PHONY: all $(JAVA_MODULES)
+all: $(TARGETS)
+
+.PHONY: all
--- a/make/Images.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/Images.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -65,8 +65,8 @@
MAIN_MODULES += jdk.deploy.osx
endif
-JRE_MODULES := $(MAIN_MODULES) $(PROVIDER_MODULES)
-JDK_MODULES := $(JRE_MODULES) $(TOOLS_MODULES)
+JRE_MODULES := $(filter-out $(MODULES_FILTER), $(MAIN_MODULES) $(PROVIDER_MODULES))
+JDK_MODULES := $(filter-out $(MODULES_FILTER), $(JRE_MODULES) $(TOOLS_MODULES))
# compact3 builds have additional modules
JDK_COMPACT3_MODULES := java.compact3 java.smartcardio jdk.httpserver jdk.naming.dns \
@@ -510,7 +510,6 @@
jimages: $(TOOL_JRE_TARGETS) $(TOOL_JDK_TARGETS) $(JRE_TARGETS) $(JDK_TARGETS) \
$(SYMBOLS_TARGETS)
-
$(JRE_COMPACT1_TARGETS): $(TOOL_JRE_COMPACT1_TARGETS)
$(JRE_COMPACT2_TARGETS): $(TOOL_JRE_COMPACT2_TARGETS)
$(JRE_COMPACT3_TARGETS): $(TOOL_JRE_COMPACT3_TARGETS)
--- a/make/Jprt.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/Jprt.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -49,7 +49,7 @@
# When running in JPRT these will be provided. Need defaults so that this makefile
# is valid anyway.
ifndef JPRT_ARCHIVE_BUNDLE
- JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/j2sdk-image.zip
+ JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/jdk-image.zip
endif
ifndef JPRT_ARCHIVE_INSTALL_BUNDLE
JPRT_ARCHIVE_INSTALL_BUNDLE=/tmp/jprt_bundles/product-install.zip
--- a/make/Main.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/Main.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -144,8 +144,8 @@
define DeclareCompileJavaRecipe
$1-java:
- +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) -f CompileJavaModules.gmk \
- $1 JAVA_MODULES=$1 MODULE=$1)
+ +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) \
+ -f CompileJavaModules.gmk MODULE=$1)
endef
$(foreach m, $(filter-out jdk.scripting.nashorn, $(JAVA_MODULES)), \
@@ -154,7 +154,8 @@
# Build nashorn. Needs to be compiled separately from the rest of the modules
# due to nasgen.
jdk.scripting.nashorn-java:
- +($(CD) $(NASHORN_TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f BuildNashorn.gmk compile)
+ +($(CD) $(NASHORN_TOPDIR)/make && $(MAKE) $(MAKE_ARGS) \
+ -f BuildNashorn.gmk compile)
ALL_TARGETS += $(JAVA_TARGETS)
@@ -195,7 +196,7 @@
ifeq ($(BUILD_HOTSPOT),true)
hotspot:
- ($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
+ +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
endif
ALL_TARGETS += hotspot
@@ -511,7 +512,7 @@
jdk.jdwp.agent-gensrc: jdk.jdi-gensrc
# Declare dependencies from <module> to all the individual targets specific
-# to that module <module>-*.
+# to that module <module>-*, that are needed for the exploded image.
$(foreach m, $(GENSRC_MODULES), $(eval $m: $m-gensrc))
$(foreach m, $(JAVA_MODULES), $(eval $m: $m-java))
$(foreach m, $(GENDATA_MODULES), $(eval $m: $m-gendata))
@@ -520,15 +521,12 @@
$(foreach m, $(LAUNCHER_MODULES), $(eval $m: $m-launchers))
$(foreach m, $(COPY_MODULES), $(eval $m: $m-copy))
-ALL_MODULE_TARGETS := $(sort $(GENSRC_MODULES) $(JAVA_MODULES) \
- $(GENDATA_MODULES) $(LIBS_MODULES) $(LAUNCHER_MODULES) $(COPY_MODULES))
-
demos: demos-jdk
samples: samples-jdk
# The "exploded image" is a locally runnable JDK in $(BUILD_OUTPUT)/jdk.
-exploded-image: $(ALL_MODULE_TARGETS)
+exploded-image: $(ALL_MODULES)
mac-bundles: mac-bundles-jdk
@@ -554,7 +552,7 @@
all-images: product-images test-image docs-image
ALL_TARGETS += buildtools gensrc gendata copy java rmic libs launchers \
- jdk.jdwp.agent-gensrc $(ALL_MODULE_TARGETS) demos samples exploded-image \
+ jdk.jdwp.agent-gensrc $(ALL_MODULES) demos samples exploded-image \
mac-bundles product-images docs-image test-image all-images
################################################################################
--- a/make/common/JavaCompilation.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/common/JavaCompilation.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -74,7 +74,7 @@
# already has one
ifneq ($$($1_COPY_$$($2_TARGET)), 1)
$1_COPY_$$($2_TARGET) := 1
- # Now we can setup the depency that will trigger the copying.
+ # Now we can setup the dependency that will trigger the copying.
$$($1_BIN)$$($2_TARGET) : $2
$(MKDIR) -p $$(@D)
$(CP) $$< $$@
@@ -311,22 +311,23 @@
$1_REMOTE:=--server:portfile=$$($1_SJAVAC_PORTFILE),id=$1,sjavac=$$(subst \
$$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_SJAVAC))))
+ $1_COMPILE_TARGET := $$($1_BIN)/_the.$1_batch
+
ifeq ($$($1_DISABLE_SJAVAC)x$$(ENABLE_SJAVAC),xyes)
+ # Using sjavac to compile.
+
ifneq (,$$($1_HEADERS))
$1_HEADERS_ARG := -h $$($1_HEADERS)
endif
- # Using sjavac to compile.
- $1_COMPILE_TARGETS := $$($1_BIN)/_the.$1_batch
-
$1_VARDEPS := $$($1_JVM) $$($1_SJAVAC) $$($1_SJAVAC_ARGS) $$($1_FLAGS) \
$$($1_HEADERS_ARG) $$($1_BIN) $$($1_EXCLUDES) $$($1_INCLUDES) \
$$($1_EXCLUDE_FILES) $$($1_INCLUDE_FILES)
$1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, $$($1_BIN)/_the.$1.vardeps)
- $$($1_BIN)/_the.$1_batch: $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)
+ $$($1_COMPILE_TARGET): $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)
$(MKDIR) -p $$(@D) $$(dir $$($1_SJAVAC_PORTFILE))
- $$(eval $$(call ListPathsSafely,$1_SRCS, $$($1_BIN)/_the.$1_batch.tmp))
+ $$(eval $$(call ListPathsSafely,$1_SRCS, $$@.tmp))
$(ECHO) Compiling $1
$(call LogFailures, $$($1_BIN)/_the.$$($1_SAFE_NAME)_batch.log, $$($1_SAFE_NAME), \
$$($1_JVM) $$($1_SJAVAC) \
@@ -334,14 +335,14 @@
-j 1 \
--permit-unidentified-artifacts \
--permit-sources-without-package \
- --compare-found-sources $$($1_BIN)/_the.$1_batch.tmp \
+ --compare-found-sources $$@.tmp \
--log=$(LOG_LEVEL) \
--state-dir=$$($1_BIN) \
$$($1_SJAVAC_ARGS) \
$$($1_FLAGS) \
$$($1_HEADERS_ARG) \
-d $$($1_BIN)) && \
- $(MV) $$($1_BIN)/_the.$1_batch.tmp $$($1_BIN)/_the.$1_batch
+ $(MV) $$@.tmp $$@
# Create a pubapi file that only changes when the pubapi changes. Dependent
# compilations can use this file to only get recompiled when pubapi has changed.
# Grep returns 1 if no matching lines are found. Do not fail for this.
@@ -354,14 +355,13 @@
else
# Using plain javac to batch compile everything.
- $1_COMPILE_TARGETS := $$($1_BIN)/_the.$1_batch
# When building in batch, put headers in a temp dir to filter out those that actually
# changed before copying them to the real header dir.
ifneq (,$$($1_HEADERS))
$1_HEADERS_ARG := -h $$($1_HEADERS).$1.tmp
- $$($1_HEADERS)/_the.$1_headers: $$($1_BIN)/_the.$1_batch
+ $$($1_HEADERS)/_the.$1_headers: $$($1_COMPILE_TARGET)
$(MKDIR) -p $$(@D)
if [ -d "$$($1_HEADERS).$1.tmp" ]; then \
for f in `ls $$($1_HEADERS).$1.tmp`; do \
@@ -389,19 +389,19 @@
endif
# When not using sjavac, pass along all sources to javac using an @file.
- $$($1_BIN)/_the.$1_batch: $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)
+ $$($1_COMPILE_TARGET): $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)
$(MKDIR) -p $$(@D)
- $$(eval $$(call ListPathsSafely,$1_SRCS, $$($1_BIN)/_the.$1_batch.tmp))
- $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.$1_batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files for $1
+ $$(eval $$(call ListPathsSafely,$1_SRCS, $$@.tmp))
+ $(ECHO) Compiling `$(WC) $$@.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files for $1
$(call LogFailures, $$($1_BIN)/_the.$$($1_SAFE_NAME)_batch.log, $$($1_SAFE_NAME), \
$$($1_JVM) $$($1_JAVAC_CMD) $$($1_FLAGS) \
-implicit:none \
- -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.$1_batch.tmp) && \
- $(MV) $$($1_BIN)/_the.$1_batch.tmp $$($1_BIN)/_the.$1_batch
+ -d $$($1_BIN) $$($1_HEADERS_ARG) @$$@.tmp) && \
+ $(MV) $$@.tmp $$@
endif
# Add all targets to main variable
- $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_COMPILE_TARGETS) \
+ $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_COMPILE_TARGET) \
$$($1_HEADER_TARGETS)
# Check if a jar file was specified, then setup the rules for the jar.
--- a/make/common/NativeCompilation.gmk Tue Nov 24 15:36:32 2015 +0100
+++ b/make/common/NativeCompilation.gmk Tue Nov 24 15:46:04 2015 +0100
@@ -120,9 +120,11 @@
# are to be run during the build.
# The BUILD_SYSROOT_*FLAGS variables are empty for now.
$(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD, \
- EXTENDS := TOOLCHAIN_DEFAULT, \
CC := $(BUILD_CC), \
+ CXX := $(BUILD_CXX), \
LD := $(BUILD_LD), \
+ AR := $(BUILD_AR), \
+ AS := $(BUILD_AS), \
SYSROOT_CFLAGS := $(BUILD_SYSROOT_CFLAGS), \
SYSROOT_LDFLAGS := $(BUILD_SYSROOT_LDFLAGS), \
))