--- a/NewMakefile.gmk Wed Oct 02 13:26:25 2013 -0700
+++ b/NewMakefile.gmk Tue Oct 08 13:09:20 2013 -0700
@@ -66,7 +66,7 @@
else
# We are building multiple configurations.
# First, find out the valid targets
- # Run the makefile with an arbitraty SPEC using -p -q (quiet dry-run and dump rules) to find
+ # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
# available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
all_phony_targets=$(filter-out $(global_targets) bundles-only, $(strip $(shell \
$(MAKE) -p -q -f common/makefiles/Main.gmk FRC SPEC=$(firstword $(SPEC)) | \
--- a/common/autoconf/generated-configure.sh Wed Oct 02 13:26:25 2013 -0700
+++ b/common/autoconf/generated-configure.sh Tue Oct 08 13:09:20 2013 -0700
@@ -1016,8 +1016,8 @@
enable_unlimited_crypto
with_milestone
with_update_version
+with_user_release_suffix
with_build_number
-with_user_release_suffix
with_boot_jdk
with_boot_jdk_jvmargs
with_add_source_root
@@ -1755,10 +1755,10 @@
--with-cacerts-file specify alternative cacerts file
--with-milestone Set milestone value for build [internal]
--with-update-version Set update version value for build [b00]
- --with-build-number Set build number value for build [b00]
--with-user-release-suffix
Add a custom string to the version string if build
number isn't set.[username_builddateb00]
+ --with-build-number Set build number value for build [b00]
--with-boot-jdk path to Boot JDK (used to bootstrap build) [probed]
--with-boot-jdk-jvmargs specify JVM arguments to be passed to all
invocations of the Boot JDK, overriding the default
@@ -3818,7 +3818,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1379504921
+DATE_WHEN_GENERATED=1381162713
###############################################################################
#
@@ -10935,7 +10935,7 @@
if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
- headful_msg="inlude support for both headful and headless"
+ headful_msg="include support for both headful and headless"
fi
if test "x$SUPPORT_HEADFUL" = xno; then
@@ -11048,6 +11048,18 @@
fi
+# Check whether --with-user-release-suffix was given.
+if test "${with_user_release_suffix+set}" = set; then :
+ withval=$with_user_release_suffix;
+fi
+
+if test "x$with_user_release_suffix" = xyes; then
+ as_fn_error $? "Release suffix must have a value" "$LINENO" 5
+elif test "x$with_user_release_suffix" != x; then
+ USER_RELEASE_SUFFIX="$with_user_release_suffix"
+fi
+
+
# Check whether --with-build-number was given.
if test "${with_build_number+set}" = set; then :
withval=$with_build_number;
@@ -11058,27 +11070,16 @@
elif test "x$with_build_number" != x; then
JDK_BUILD_NUMBER="$with_build_number"
fi
+# Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
if test "x$JDK_BUILD_NUMBER" = x; then
JDK_BUILD_NUMBER=b00
-fi
-
-
-# Check whether --with-user-release-suffix was given.
-if test "${with_user_release_suffix+set}" = set; then :
- withval=$with_user_release_suffix;
-fi
-
-if test "x$with_user_release_suffix" = xyes; then
- as_fn_error $? "Release suffix must have a value" "$LINENO" 5
-elif test "x$with_user_release_suffix" != x; then
- USER_RELEASE_SUFFIX="$with_user_release_suffix"
-else
- BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
- # Avoid [:alnum:] since it depends on the locale.
- CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
- USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-fi
-
+ if test "x$USER_RELEASE_SUFFIX" = x; then
+ BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
+ # Avoid [:alnum:] since it depends on the locale.
+ CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
+ USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+fi
# Now set the JDK version, milestone, build number etc.
@@ -11095,6 +11096,7 @@
+
COPYRIGHT_YEAR=`date +'%Y'`
--- a/common/autoconf/jdk-options.m4 Wed Oct 02 13:26:25 2013 -0700
+++ b/common/autoconf/jdk-options.m4 Tue Oct 08 13:09:20 2013 -0700
@@ -316,7 +316,7 @@
if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
- headful_msg="inlude support for both headful and headless"
+ headful_msg="include support for both headful and headless"
fi
if test "x$SUPPORT_HEADFUL" = xno; then
@@ -426,6 +426,14 @@
JDK_UPDATE_VERSION="$with_update_version"
fi
+AC_ARG_WITH(user-release-suffix, [AS_HELP_STRING([--with-user-release-suffix],
+ [Add a custom string to the version string if build number isn't set.@<:@username_builddateb00@:>@])])
+if test "x$with_user_release_suffix" = xyes; then
+ AC_MSG_ERROR([Release suffix must have a value])
+elif test "x$with_user_release_suffix" != x; then
+ USER_RELEASE_SUFFIX="$with_user_release_suffix"
+fi
+
AC_ARG_WITH(build-number, [AS_HELP_STRING([--with-build-number],
[Set build number value for build @<:@b00@:>@])])
if test "x$with_build_number" = xyes; then
@@ -433,25 +441,19 @@
elif test "x$with_build_number" != x; then
JDK_BUILD_NUMBER="$with_build_number"
fi
+# Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
if test "x$JDK_BUILD_NUMBER" = x; then
JDK_BUILD_NUMBER=b00
+ if test "x$USER_RELEASE_SUFFIX" = x; then
+ BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
+ # Avoid [:alnum:] since it depends on the locale.
+ CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
+ USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
fi
-AC_ARG_WITH(user-release-suffix, [AS_HELP_STRING([--with-user-release-suffix],
- [Add a custom string to the version string if build number isn't set.@<:@username_builddateb00@:>@])])
-if test "x$with_user_release_suffix" = xyes; then
- AC_MSG_ERROR([Release suffix must have a value])
-elif test "x$with_user_release_suffix" != x; then
- USER_RELEASE_SUFFIX="$with_user_release_suffix"
-else
- BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
- # Avoid [:alnum:] since it depends on the locale.
- CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
- USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-fi
+# Now set the JDK version, milestone, build number etc.
AC_SUBST(USER_RELEASE_SUFFIX)
-
-# Now set the JDK version, milestone, build number etc.
AC_SUBST(JDK_MAJOR_VERSION)
AC_SUBST(JDK_MINOR_VERSION)
AC_SUBST(JDK_MICRO_VERSION)
--- a/common/autoconf/spec.gmk.in Wed Oct 02 13:26:25 2013 -0700
+++ b/common/autoconf/spec.gmk.in Tue Oct 08 13:09:20 2013 -0700
@@ -161,6 +161,7 @@
COMPANY_NAME:=@COMPANY_NAME@
MACOSX_BUNDLE_NAME_BASE=@MACOSX_BUNDLE_NAME_BASE@
MACOSX_BUNDLE_ID_BASE=@MACOSX_BUNDLE_ID_BASE@
+USER_RELEASE_SUFFIX=@USER_RELEASE_SUFFIX@
# Different version strings generated from the above information.
JDK_VERSION:=@JDK_VERSION@
@@ -173,8 +174,8 @@
else
RELEASE=$(JDK_VERSION)-$(MILESTONE)$(BUILD_VARIANT_RELEASE)
endif
-ifeq ($(JDK_BUILD_NUMBER),b00)
- USER_RELEASE_SUFFIX=@USER_RELEASE_SUFFIX@
+
+ifneq ($(USER_RELEASE_SUFFIX),)
FULL_VERSION=$(RELEASE)-$(USER_RELEASE_SUFFIX)-$(JDK_BUILD_NUMBER)
else
FULL_VERSION=$(RELEASE)-$(JDK_BUILD_NUMBER)
--- a/common/makefiles/JavaCompilation.gmk Wed Oct 02 13:26:25 2013 -0700
+++ b/common/makefiles/JavaCompilation.gmk Tue Oct 08 13:09:20 2013 -0700
@@ -159,7 +159,7 @@
endif
endif
- # Utility macros, to make the shell script receipt somewhat easier to dechipher.
+ # Utility macros, to make the shell script receipt somewhat easier to decipher.
# The capture contents macro finds all files (matching the patterns, typically
# .class and .prp) that are newer than the jar-file, ie the new content to be put into the jar.
@@ -520,7 +520,7 @@
# Using plain javac to batch compile everything.
$1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/_the.batch
- # When buliding in batch, put headers in a temp dir to filter out those that actually
+ # When building in batch, put headers in a temp dir to filter out those that actually
# changed before copying them to the real header dir.
ifneq (,$$($1_HEADERS))
$1_HEADERS_ARG := -h $$($1_HEADERS).tmp
--- a/make/scripts/webrev.ksh Wed Oct 02 13:26:25 2013 -0700
+++ b/make/scripts/webrev.ksh Tue Oct 08 13:09:20 2013 -0700
@@ -2704,11 +2704,11 @@
rm -f $WDIR/$DIR/$F.html
its_a_jar=
- if expr $F : '.*\.jar' >/dev/null; then
+ if expr $F : '.*\.jar' \| $F : '.*\.zip' >/dev/null; then
its_a_jar=1
- # It's a JAR file, let's do it differntly
+ # It's a JAR or ZIP file, let's do it differently
if [[ -z $JAR ]]; then
- print "No access to jar, so can't produce diffs for jar files"
+ print "No access to jar, so can't produce diffs for jar or zip files"
else
if [ -f $ofile ]; then
$JAR -tvf $ofile >"$ofile".lst