--- a/hotspot/src/cpu/x86/vm/templateInterpreter_x86_64.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/cpu/x86/vm/templateInterpreter_x86_64.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -849,9 +849,9 @@
address entry = __ pc();
// rbx,: Method*
- // rsi: senderSP must preserved for slow path, set SP to it on fast path
- // rdx: scratch
- // rdi: scratch
+ // r13: senderSP must preserved for slow path, set SP to it on fast path
+ // c_rarg0: scratch (rdi on non-Win64, rcx on Win64)
+ // c_rarg1: scratch (rsi on non-Win64, rdx on Win64)
Label slow_path;
// If we need a safepoint check, generate full interpreter entry.
@@ -865,8 +865,8 @@
// Load parameters
const Register crc = rax; // crc
- const Register val = rdx; // source java byte value
- const Register tbl = rdi; // scratch
+ const Register val = c_rarg0; // source java byte value
+ const Register tbl = c_rarg1; // scratch
// Arguments are reversed on java expression stack
__ movl(val, Address(rsp, wordSize)); // byte value
@@ -880,7 +880,7 @@
// _areturn
__ pop(rdi); // get return address
- __ mov(rsp, rsi); // set sp to sender sp
+ __ mov(rsp, r13); // set sp to sender sp
__ jmp(rdi);
// generate a vanilla native entry as the slow path
@@ -919,20 +919,24 @@
const Register crc = c_rarg0; // crc
const Register buf = c_rarg1; // source java byte array address
const Register len = c_rarg2; // length
+ const Register off = len; // offset (never overlaps with 'len')
// Arguments are reversed on java expression stack
- __ movl(len, Address(rsp, wordSize)); // Length
// Calculate address of start element
if (kind == Interpreter::java_util_zip_CRC32_updateByteBuffer) {
__ movptr(buf, Address(rsp, 3*wordSize)); // long buf
- __ addptr(buf, Address(rsp, 2*wordSize)); // + offset
+ __ movl2ptr(off, Address(rsp, 2*wordSize)); // offset
+ __ addq(buf, off); // + offset
__ movl(crc, Address(rsp, 5*wordSize)); // Initial CRC
} else {
__ movptr(buf, Address(rsp, 3*wordSize)); // byte[] array
__ addptr(buf, arrayOopDesc::base_offset_in_bytes(T_BYTE)); // + header size
- __ addptr(buf, Address(rsp, 2*wordSize)); // + offset
+ __ movl2ptr(off, Address(rsp, 2*wordSize)); // offset
+ __ addq(buf, off); // + offset
__ movl(crc, Address(rsp, 4*wordSize)); // Initial CRC
}
+ // Can now load 'len' since we're finished with 'off'
+ __ movl(len, Address(rsp, wordSize)); // Length
__ super_call_VM_leaf(CAST_FROM_FN_PTR(address, StubRoutines::updateBytesCRC32()), crc, buf, len);
// result in rax
--- a/hotspot/src/share/vm/oops/method.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/oops/method.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -747,6 +747,7 @@
set_not_c2_compilable();
}
CompilationPolicy::policy()->disable_compilation(this);
+ assert(!CompilationPolicy::can_be_compiled(this, comp_level), "sanity check");
}
bool Method::is_not_osr_compilable(int comp_level) const {
@@ -773,6 +774,7 @@
set_not_c2_osr_compilable();
}
CompilationPolicy::policy()->disable_compilation(this);
+ assert(!CompilationPolicy::can_be_osr_compiled(this, comp_level), "sanity check");
}
// Revert to using the interpreter and clear out the nmethod
--- a/hotspot/src/share/vm/opto/block.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/block.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -35,10 +35,6 @@
#include "opto/rootnode.hpp"
#include "utilities/copy.hpp"
-// Optimization - Graph Style
-
-
-//-----------------------------------------------------------------------------
void Block_Array::grow( uint i ) {
assert(i >= Max(), "must be an overflow");
debug_only(_limit = i+1);
@@ -54,7 +50,6 @@
Copy::zero_to_bytes( &_blocks[old], (_size-old)*sizeof(Block*) );
}
-//=============================================================================
void Block_List::remove(uint i) {
assert(i < _cnt, "index out of bounds");
Copy::conjoint_words_to_lower((HeapWord*)&_blocks[i+1], (HeapWord*)&_blocks[i], ((_cnt-i-1)*sizeof(Block*)));
@@ -76,8 +71,6 @@
}
#endif
-//=============================================================================
-
uint Block::code_alignment() {
// Check for Root block
if (_pre_order == 0) return CodeEntryAlignment;
@@ -113,7 +106,6 @@
return unit_sz; // no particular alignment
}
-//-----------------------------------------------------------------------------
// Compute the size of first 'inst_cnt' instructions in this block.
// Return the number of instructions left to compute if the block has
// less then 'inst_cnt' instructions. Stop, and return 0 if sum_size
@@ -138,7 +130,6 @@
return inst_cnt;
}
-//-----------------------------------------------------------------------------
uint Block::find_node( const Node *n ) const {
for( uint i = 0; i < _nodes.size(); i++ ) {
if( _nodes[i] == n )
@@ -153,7 +144,6 @@
_nodes.remove(find_node(n));
}
-//------------------------------is_Empty---------------------------------------
// Return empty status of a block. Empty blocks contain only the head, other
// ideal nodes, and an optional trailing goto.
int Block::is_Empty() const {
@@ -192,7 +182,6 @@
return not_empty;
}
-//------------------------------has_uncommon_code------------------------------
// Return true if the block's code implies that it is likely to be
// executed infrequently. Check to see if the block ends in a Halt or
// a low probability call.
@@ -218,7 +207,6 @@
return op == Op_Halt;
}
-//------------------------------is_uncommon------------------------------------
// True if block is low enough frequency or guarded by a test which
// mostly does not go here.
bool Block::is_uncommon(PhaseCFG* cfg) const {
@@ -271,7 +259,6 @@
return false;
}
-//------------------------------dump-------------------------------------------
#ifndef PRODUCT
void Block::dump_bidx(const Block* orig, outputStream* st) const {
if (_pre_order) st->print("B%d",_pre_order);
@@ -364,13 +351,12 @@
}
#endif
-//=============================================================================
-//------------------------------PhaseCFG---------------------------------------
PhaseCFG::PhaseCFG(Arena* arena, RootNode* root, Matcher& matcher)
: Phase(CFG)
, _block_arena(arena)
+, _root(root)
+, _matcher(matcher)
, _node_to_block_mapping(arena)
-, _root(root)
, _node_latency(NULL)
#ifndef PRODUCT
, _trace_opto_pipelining(TraceOptoPipelining || C->method_has_option("TraceOptoPipelining"))
@@ -390,11 +376,10 @@
_goto->set_req(0,_goto);
// Build the CFG in Reverse Post Order
- _num_blocks = build_cfg();
- _broot = get_block_for_node(_root);
+ _number_of_blocks = build_cfg();
+ _root_block = get_block_for_node(_root);
}
-//------------------------------build_cfg--------------------------------------
// Build a proper looking CFG. Make every block begin with either a StartNode
// or a RegionNode. Make every block end with either a Goto, If or Return.
// The RootNode both starts and ends it's own block. Do this with a recursive
@@ -496,13 +481,12 @@
return sum;
}
-//------------------------------insert_goto_at---------------------------------
// Inserts a goto & corresponding basic block between
// block[block_no] and its succ_no'th successor block
void PhaseCFG::insert_goto_at(uint block_no, uint succ_no) {
// get block with block_no
- assert(block_no < _num_blocks, "illegal block number");
- Block* in = _blocks[block_no];
+ assert(block_no < number_of_blocks(), "illegal block number");
+ Block* in = get_block(block_no);
// get successor block succ_no
assert(succ_no < in->_num_succs, "illegal successor number");
Block* out = in->_succs[succ_no];
@@ -537,11 +521,9 @@
// Set the frequency of the new block
block->_freq = freq;
// add new basic block to basic block list
- _blocks.insert(block_no + 1, block);
- _num_blocks++;
+ add_block_at(block_no + 1, block);
}
-//------------------------------no_flip_branch---------------------------------
// Does this block end in a multiway branch that cannot have the default case
// flipped for another case?
static bool no_flip_branch( Block *b ) {
@@ -560,7 +542,6 @@
return false;
}
-//------------------------------convert_NeverBranch_to_Goto--------------------
// Check for NeverBranch at block end. This needs to become a GOTO to the
// true target. NeverBranch are treated as a conditional branch that always
// goes the same direction for most of the optimizer and are used to give a
@@ -598,7 +579,6 @@
dead->_nodes[k]->del_req(j);
}
-//------------------------------move_to_next-----------------------------------
// Helper function to move block bx to the slot following b_index. Return
// true if the move is successful, otherwise false
bool PhaseCFG::move_to_next(Block* bx, uint b_index) {
@@ -606,20 +586,22 @@
// Return false if bx is already scheduled.
uint bx_index = bx->_pre_order;
- if ((bx_index <= b_index) && (_blocks[bx_index] == bx)) {
+ if ((bx_index <= b_index) && (get_block(bx_index) == bx)) {
return false;
}
// Find the current index of block bx on the block list
bx_index = b_index + 1;
- while( bx_index < _num_blocks && _blocks[bx_index] != bx ) bx_index++;
- assert(_blocks[bx_index] == bx, "block not found");
+ while (bx_index < number_of_blocks() && get_block(bx_index) != bx) {
+ bx_index++;
+ }
+ assert(get_block(bx_index) == bx, "block not found");
// If the previous block conditionally falls into bx, return false,
// because moving bx will create an extra jump.
for(uint k = 1; k < bx->num_preds(); k++ ) {
Block* pred = get_block_for_node(bx->pred(k));
- if (pred == _blocks[bx_index-1]) {
+ if (pred == get_block(bx_index - 1)) {
if (pred->_num_succs != 1) {
return false;
}
@@ -632,7 +614,6 @@
return true;
}
-//------------------------------move_to_end------------------------------------
// Move empty and uncommon blocks to the end.
void PhaseCFG::move_to_end(Block *b, uint i) {
int e = b->is_Empty();
@@ -650,31 +631,31 @@
_blocks.push(b);
}
-//---------------------------set_loop_alignment--------------------------------
// Set loop alignment for every block
void PhaseCFG::set_loop_alignment() {
- uint last = _num_blocks;
- assert( _blocks[0] == _broot, "" );
+ uint last = number_of_blocks();
+ assert(get_block(0) == get_root_block(), "");
- for (uint i = 1; i < last; i++ ) {
- Block *b = _blocks[i];
- if (b->head()->is_Loop()) {
- b->set_loop_alignment(b);
+ for (uint i = 1; i < last; i++) {
+ Block* block = get_block(i);
+ if (block->head()->is_Loop()) {
+ block->set_loop_alignment(block);
}
}
}
-//-----------------------------remove_empty------------------------------------
// Make empty basic blocks to be "connector" blocks, Move uncommon blocks
// to the end.
-void PhaseCFG::remove_empty() {
+void PhaseCFG::remove_empty_blocks() {
// Move uncommon blocks to the end
- uint last = _num_blocks;
- assert( _blocks[0] == _broot, "" );
+ uint last = number_of_blocks();
+ assert(get_block(0) == get_root_block(), "");
for (uint i = 1; i < last; i++) {
- Block *b = _blocks[i];
- if (b->is_connector()) break;
+ Block* block = get_block(i);
+ if (block->is_connector()) {
+ break;
+ }
// Check for NeverBranch at block end. This needs to become a GOTO to the
// true target. NeverBranch are treated as a conditional branch that
@@ -682,124 +663,127 @@
// to give a fake exit path to infinite loops. At this late stage they
// need to turn into Goto's so that when you enter the infinite loop you
// indeed hang.
- if( b->_nodes[b->end_idx()]->Opcode() == Op_NeverBranch )
- convert_NeverBranch_to_Goto(b);
+ if (block->_nodes[block->end_idx()]->Opcode() == Op_NeverBranch) {
+ convert_NeverBranch_to_Goto(block);
+ }
// Look for uncommon blocks and move to end.
if (!C->do_freq_based_layout()) {
- if (b->is_uncommon(this)) {
- move_to_end(b, i);
+ if (block->is_uncommon(this)) {
+ move_to_end(block, i);
last--; // No longer check for being uncommon!
- if( no_flip_branch(b) ) { // Fall-thru case must follow?
- b = _blocks[i]; // Find the fall-thru block
- move_to_end(b, i);
+ if (no_flip_branch(block)) { // Fall-thru case must follow?
+ // Find the fall-thru block
+ block = get_block(i);
+ move_to_end(block, i);
last--;
}
- i--; // backup block counter post-increment
+ // backup block counter post-increment
+ i--;
}
}
}
// Move empty blocks to the end
- last = _num_blocks;
+ last = number_of_blocks();
for (uint i = 1; i < last; i++) {
- Block *b = _blocks[i];
- if (b->is_Empty() != Block::not_empty) {
- move_to_end(b, i);
+ Block* block = get_block(i);
+ if (block->is_Empty() != Block::not_empty) {
+ move_to_end(block, i);
last--;
i--;
}
} // End of for all blocks
}
-//-----------------------------fixup_flow--------------------------------------
// Fix up the final control flow for basic blocks.
void PhaseCFG::fixup_flow() {
// Fixup final control flow for the blocks. Remove jump-to-next
// block. If neither arm of a IF follows the conditional branch, we
// have to add a second jump after the conditional. We place the
// TRUE branch target in succs[0] for both GOTOs and IFs.
- for (uint i=0; i < _num_blocks; i++) {
- Block *b = _blocks[i];
- b->_pre_order = i; // turn pre-order into block-index
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ block->_pre_order = i; // turn pre-order into block-index
// Connector blocks need no further processing.
- if (b->is_connector()) {
- assert((i+1) == _num_blocks || _blocks[i+1]->is_connector(),
- "All connector blocks should sink to the end");
+ if (block->is_connector()) {
+ assert((i+1) == number_of_blocks() || get_block(i + 1)->is_connector(), "All connector blocks should sink to the end");
continue;
}
- assert(b->is_Empty() != Block::completely_empty,
- "Empty blocks should be connectors");
+ assert(block->is_Empty() != Block::completely_empty, "Empty blocks should be connectors");
- Block *bnext = (i < _num_blocks-1) ? _blocks[i+1] : NULL;
- Block *bs0 = b->non_connector_successor(0);
+ Block* bnext = (i < number_of_blocks() - 1) ? get_block(i + 1) : NULL;
+ Block* bs0 = block->non_connector_successor(0);
// Check for multi-way branches where I cannot negate the test to
// exchange the true and false targets.
- if( no_flip_branch( b ) ) {
+ if (no_flip_branch(block)) {
// Find fall through case - if must fall into its target
- int branch_idx = b->_nodes.size() - b->_num_succs;
- for (uint j2 = 0; j2 < b->_num_succs; j2++) {
- const ProjNode* p = b->_nodes[branch_idx + j2]->as_Proj();
+ int branch_idx = block->_nodes.size() - block->_num_succs;
+ for (uint j2 = 0; j2 < block->_num_succs; j2++) {
+ const ProjNode* p = block->_nodes[branch_idx + j2]->as_Proj();
if (p->_con == 0) {
// successor j2 is fall through case
- if (b->non_connector_successor(j2) != bnext) {
+ if (block->non_connector_successor(j2) != bnext) {
// but it is not the next block => insert a goto
insert_goto_at(i, j2);
}
// Put taken branch in slot 0
- if( j2 == 0 && b->_num_succs == 2) {
+ if (j2 == 0 && block->_num_succs == 2) {
// Flip targets in succs map
- Block *tbs0 = b->_succs[0];
- Block *tbs1 = b->_succs[1];
- b->_succs.map( 0, tbs1 );
- b->_succs.map( 1, tbs0 );
+ Block *tbs0 = block->_succs[0];
+ Block *tbs1 = block->_succs[1];
+ block->_succs.map(0, tbs1);
+ block->_succs.map(1, tbs0);
}
break;
}
}
+
// Remove all CatchProjs
- for (uint j1 = 0; j1 < b->_num_succs; j1++) b->_nodes.pop();
+ for (uint j = 0; j < block->_num_succs; j++) {
+ block->_nodes.pop();
+ }
- } else if (b->_num_succs == 1) {
+ } else if (block->_num_succs == 1) {
// Block ends in a Goto?
if (bnext == bs0) {
// We fall into next block; remove the Goto
- b->_nodes.pop();
+ block->_nodes.pop();
}
- } else if( b->_num_succs == 2 ) { // Block ends in a If?
+ } else if(block->_num_succs == 2) { // Block ends in a If?
// Get opcode of 1st projection (matches _succs[0])
// Note: Since this basic block has 2 exits, the last 2 nodes must
// be projections (in any order), the 3rd last node must be
// the IfNode (we have excluded other 2-way exits such as
// CatchNodes already).
- MachNode *iff = b->_nodes[b->_nodes.size()-3]->as_Mach();
- ProjNode *proj0 = b->_nodes[b->_nodes.size()-2]->as_Proj();
- ProjNode *proj1 = b->_nodes[b->_nodes.size()-1]->as_Proj();
+ MachNode* iff = block->_nodes[block->_nodes.size() - 3]->as_Mach();
+ ProjNode* proj0 = block->_nodes[block->_nodes.size() - 2]->as_Proj();
+ ProjNode* proj1 = block->_nodes[block->_nodes.size() - 1]->as_Proj();
// Assert that proj0 and succs[0] match up. Similarly for proj1 and succs[1].
- assert(proj0->raw_out(0) == b->_succs[0]->head(), "Mismatch successor 0");
- assert(proj1->raw_out(0) == b->_succs[1]->head(), "Mismatch successor 1");
+ assert(proj0->raw_out(0) == block->_succs[0]->head(), "Mismatch successor 0");
+ assert(proj1->raw_out(0) == block->_succs[1]->head(), "Mismatch successor 1");
- Block *bs1 = b->non_connector_successor(1);
+ Block* bs1 = block->non_connector_successor(1);
// Check for neither successor block following the current
// block ending in a conditional. If so, move one of the
// successors after the current one, provided that the
// successor was previously unscheduled, but moveable
// (i.e., all paths to it involve a branch).
- if( !C->do_freq_based_layout() && bnext != bs0 && bnext != bs1 ) {
+ if (!C->do_freq_based_layout() && bnext != bs0 && bnext != bs1) {
// Choose the more common successor based on the probability
// of the conditional branch.
- Block *bx = bs0;
- Block *by = bs1;
+ Block* bx = bs0;
+ Block* by = bs1;
// _prob is the probability of taking the true path. Make
// p the probability of taking successor #1.
float p = iff->as_MachIf()->_prob;
- if( proj0->Opcode() == Op_IfTrue ) {
+ if (proj0->Opcode() == Op_IfTrue) {
p = 1.0 - p;
}
@@ -826,14 +810,16 @@
// succs[1].
if (bnext == bs0) {
// Fall-thru case in succs[0], so flip targets in succs map
- Block *tbs0 = b->_succs[0];
- Block *tbs1 = b->_succs[1];
- b->_succs.map( 0, tbs1 );
- b->_succs.map( 1, tbs0 );
+ Block* tbs0 = block->_succs[0];
+ Block* tbs1 = block->_succs[1];
+ block->_succs.map(0, tbs1);
+ block->_succs.map(1, tbs0);
// Flip projection for each target
- { ProjNode *tmp = proj0; proj0 = proj1; proj1 = tmp; }
+ ProjNode* tmp = proj0;
+ proj0 = proj1;
+ proj1 = tmp;
- } else if( bnext != bs1 ) {
+ } else if(bnext != bs1) {
// Need a double-branch
// The existing conditional branch need not change.
// Add a unconditional branch to the false target.
@@ -843,12 +829,12 @@
}
// Make sure we TRUE branch to the target
- if( proj0->Opcode() == Op_IfFalse ) {
+ if (proj0->Opcode() == Op_IfFalse) {
iff->as_MachIf()->negate();
}
- b->_nodes.pop(); // Remove IfFalse & IfTrue projections
- b->_nodes.pop();
+ block->_nodes.pop(); // Remove IfFalse & IfTrue projections
+ block->_nodes.pop();
} else {
// Multi-exit block, e.g. a switch statement
@@ -858,7 +844,6 @@
}
-//------------------------------dump-------------------------------------------
#ifndef PRODUCT
void PhaseCFG::_dump_cfg( const Node *end, VectorSet &visited ) const {
const Node *x = end->is_block_proj();
@@ -884,10 +869,11 @@
}
void PhaseCFG::dump( ) const {
- tty->print("\n--- CFG --- %d BBs\n",_num_blocks);
+ tty->print("\n--- CFG --- %d BBs\n", number_of_blocks());
if (_blocks.size()) { // Did we do basic-block layout?
- for (uint i = 0; i < _num_blocks; i++) {
- _blocks[i]->dump(this);
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ const Block* block = get_block(i);
+ block->dump(this);
}
} else { // Else do it with a DFS
VectorSet visited(_block_arena);
@@ -896,27 +882,26 @@
}
void PhaseCFG::dump_headers() {
- for( uint i = 0; i < _num_blocks; i++ ) {
- if (_blocks[i]) {
- _blocks[i]->dump_head(this);
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ if (block != NULL) {
+ block->dump_head(this);
}
}
}
-void PhaseCFG::verify( ) const {
+void PhaseCFG::verify() const {
#ifdef ASSERT
// Verify sane CFG
- for (uint i = 0; i < _num_blocks; i++) {
- Block *b = _blocks[i];
- uint cnt = b->_nodes.size();
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ uint cnt = block->_nodes.size();
uint j;
for (j = 0; j < cnt; j++) {
- Node *n = b->_nodes[j];
- assert(get_block_for_node(n) == b, "");
- if (j >= 1 && n->is_Mach() &&
- n->as_Mach()->ideal_Opcode() == Op_CreateEx) {
- assert(j == 1 || b->_nodes[j-1]->is_Phi(),
- "CreateEx must be first instruction in block");
+ Node *n = block->_nodes[j];
+ assert(get_block_for_node(n) == block, "");
+ if (j >= 1 && n->is_Mach() && n->as_Mach()->ideal_Opcode() == Op_CreateEx) {
+ assert(j == 1 || block->_nodes[j-1]->is_Phi(), "CreateEx must be first instruction in block");
}
for (uint k = 0; k < n->req(); k++) {
Node *def = n->in(k);
@@ -926,8 +911,7 @@
// Uses must follow their definition if they are at the same block.
// Mostly done to check that MachSpillCopy nodes are placed correctly
// when CreateEx node is moved in build_ifg_physical().
- if (get_block_for_node(def) == b &&
- !(b->head()->is_Loop() && n->is_Phi()) &&
+ if (get_block_for_node(def) == block && !(block->head()->is_Loop() && n->is_Phi()) &&
// See (+++) comment in reg_split.cpp
!(n->jvms() != NULL && n->jvms()->is_monitor_use(k))) {
bool is_loop = false;
@@ -939,29 +923,29 @@
}
}
}
- assert(is_loop || b->find_node(def) < j, "uses must follow definitions");
+ assert(is_loop || block->find_node(def) < j, "uses must follow definitions");
}
}
}
}
- j = b->end_idx();
- Node *bp = (Node*)b->_nodes[b->_nodes.size()-1]->is_block_proj();
- assert( bp, "last instruction must be a block proj" );
- assert( bp == b->_nodes[j], "wrong number of successors for this block" );
+ j = block->end_idx();
+ Node* bp = (Node*)block->_nodes[block->_nodes.size() - 1]->is_block_proj();
+ assert(bp, "last instruction must be a block proj");
+ assert(bp == block->_nodes[j], "wrong number of successors for this block");
if (bp->is_Catch()) {
- while (b->_nodes[--j]->is_MachProj()) ;
- assert(b->_nodes[j]->is_MachCall(), "CatchProj must follow call");
+ while (block->_nodes[--j]->is_MachProj()) {
+ ;
+ }
+ assert(block->_nodes[j]->is_MachCall(), "CatchProj must follow call");
} else if (bp->is_Mach() && bp->as_Mach()->ideal_Opcode() == Op_If) {
- assert(b->_num_succs == 2, "Conditional branch must have two targets");
+ assert(block->_num_succs == 2, "Conditional branch must have two targets");
}
}
#endif
}
#endif
-//=============================================================================
-//------------------------------UnionFind--------------------------------------
UnionFind::UnionFind( uint max ) : _cnt(max), _max(max), _indices(NEW_RESOURCE_ARRAY(uint,max)) {
Copy::zero_to_bytes( _indices, sizeof(uint)*max );
}
@@ -986,7 +970,6 @@
for( uint i=0; i<max; i++ ) map(i,i);
}
-//------------------------------Find_compress----------------------------------
// Straight out of Tarjan's union-find algorithm
uint UnionFind::Find_compress( uint idx ) {
uint cur = idx;
@@ -1006,7 +989,6 @@
return idx;
}
-//------------------------------Find_const-------------------------------------
// Like Find above, but no path compress, so bad asymptotic behavior
uint UnionFind::Find_const( uint idx ) const {
if( idx == 0 ) return idx; // Ignore the zero idx
@@ -1021,7 +1003,6 @@
return next;
}
-//------------------------------Union------------------------------------------
// union 2 sets together.
void UnionFind::Union( uint idx1, uint idx2 ) {
uint src = Find(idx1);
@@ -1070,9 +1051,6 @@
}
#endif
-//=============================================================================
-
-//------------------------------edge_order-------------------------------------
// Comparison function for edges
static int edge_order(CFGEdge **e0, CFGEdge **e1) {
float freq0 = (*e0)->freq();
@@ -1087,7 +1065,6 @@
return dist1 - dist0;
}
-//------------------------------trace_frequency_order--------------------------
// Comparison function for edges
extern "C" int trace_frequency_order(const void *p0, const void *p1) {
Trace *tr0 = *(Trace **) p0;
@@ -1113,17 +1090,15 @@
return diff;
}
-//------------------------------find_edges-------------------------------------
// Find edges of interest, i.e, those which can fall through. Presumes that
// edges which don't fall through are of low frequency and can be generally
// ignored. Initialize the list of traces.
-void PhaseBlockLayout::find_edges()
-{
+void PhaseBlockLayout::find_edges() {
// Walk the blocks, creating edges and Traces
uint i;
Trace *tr = NULL;
- for (i = 0; i < _cfg._num_blocks; i++) {
- Block *b = _cfg._blocks[i];
+ for (i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* b = _cfg.get_block(i);
tr = new Trace(b, next, prev);
traces[tr->id()] = tr;
@@ -1147,7 +1122,7 @@
if (n->num_preds() != 1) break;
i++;
- assert(n = _cfg._blocks[i], "expecting next block");
+ assert(n = _cfg.get_block(i), "expecting next block");
tr->append(n);
uf->map(n->_pre_order, tr->id());
traces[n->_pre_order] = NULL;
@@ -1171,8 +1146,8 @@
}
// Group connector blocks into one trace
- for (i++; i < _cfg._num_blocks; i++) {
- Block *b = _cfg._blocks[i];
+ for (i++; i < _cfg.number_of_blocks(); i++) {
+ Block *b = _cfg.get_block(i);
assert(b->is_connector(), "connector blocks at the end");
tr->append(b);
uf->map(b->_pre_order, tr->id());
@@ -1180,10 +1155,8 @@
}
}
-//------------------------------union_traces----------------------------------
// Union two traces together in uf, and null out the trace in the list
-void PhaseBlockLayout::union_traces(Trace* updated_trace, Trace* old_trace)
-{
+void PhaseBlockLayout::union_traces(Trace* updated_trace, Trace* old_trace) {
uint old_id = old_trace->id();
uint updated_id = updated_trace->id();
@@ -1207,10 +1180,8 @@
traces[hi_id] = NULL;
}
-//------------------------------grow_traces-------------------------------------
// Append traces together via the most frequently executed edges
-void PhaseBlockLayout::grow_traces()
-{
+void PhaseBlockLayout::grow_traces() {
// Order the edges, and drive the growth of Traces via the most
// frequently executed edges.
edges->sort(edge_order);
@@ -1252,11 +1223,9 @@
}
}
-//------------------------------merge_traces-----------------------------------
// Embed one trace into another, if the fork or join points are sufficiently
// balanced.
-void PhaseBlockLayout::merge_traces(bool fall_thru_only)
-{
+void PhaseBlockLayout::merge_traces(bool fall_thru_only) {
// Walk the edge list a another time, looking at unprocessed edges.
// Fold in diamonds
for (int i = 0; i < edges->length(); i++) {
@@ -1310,7 +1279,7 @@
src_trace->insert_after(src_block, targ_trace);
union_traces(src_trace, targ_trace);
} else if (src_at_tail) {
- if (src_trace != trace(_cfg._broot)) {
+ if (src_trace != trace(_cfg.get_root_block())) {
e->set_state(CFGEdge::connected);
targ_trace->insert_before(targ_block, src_trace);
union_traces(targ_trace, src_trace);
@@ -1319,7 +1288,7 @@
} else if (e->state() == CFGEdge::open) {
// Append traces, even without a fall-thru connection.
// But leave root entry at the beginning of the block list.
- if (targ_trace != trace(_cfg._broot)) {
+ if (targ_trace != trace(_cfg.get_root_block())) {
e->set_state(CFGEdge::connected);
src_trace->append(targ_trace);
union_traces(src_trace, targ_trace);
@@ -1328,11 +1297,9 @@
}
}
-//----------------------------reorder_traces-----------------------------------
// Order the sequence of the traces in some desirable way, and fixup the
// jumps at the end of each block.
-void PhaseBlockLayout::reorder_traces(int count)
-{
+void PhaseBlockLayout::reorder_traces(int count) {
ResourceArea *area = Thread::current()->resource_area();
Trace ** new_traces = NEW_ARENA_ARRAY(area, Trace *, count);
Block_List worklist;
@@ -1347,15 +1314,14 @@
}
// The entry block should be first on the new trace list.
- Trace *tr = trace(_cfg._broot);
+ Trace *tr = trace(_cfg.get_root_block());
assert(tr == new_traces[0], "entry trace misplaced");
// Sort the new trace list by frequency
qsort(new_traces + 1, new_count - 1, sizeof(new_traces[0]), trace_frequency_order);
// Patch up the successor blocks
- _cfg._blocks.reset();
- _cfg._num_blocks = 0;
+ _cfg.clear_blocks();
for (int i = 0; i < new_count; i++) {
Trace *tr = new_traces[i];
if (tr != NULL) {
@@ -1364,17 +1330,15 @@
}
}
-//------------------------------PhaseBlockLayout-------------------------------
// Order basic blocks based on frequency
-PhaseBlockLayout::PhaseBlockLayout(PhaseCFG &cfg) :
- Phase(BlockLayout),
- _cfg(cfg)
-{
+PhaseBlockLayout::PhaseBlockLayout(PhaseCFG &cfg)
+: Phase(BlockLayout)
+, _cfg(cfg) {
ResourceMark rm;
ResourceArea *area = Thread::current()->resource_area();
// List of traces
- int size = _cfg._num_blocks + 1;
+ int size = _cfg.number_of_blocks() + 1;
traces = NEW_ARENA_ARRAY(area, Trace *, size);
memset(traces, 0, size*sizeof(Trace*));
next = NEW_ARENA_ARRAY(area, Block *, size);
@@ -1407,11 +1371,10 @@
// Re-order all the remaining traces by frequency
reorder_traces(size);
- assert(_cfg._num_blocks >= (uint) (size - 1), "number of blocks can not shrink");
+ assert(_cfg.number_of_blocks() >= (uint) (size - 1), "number of blocks can not shrink");
}
-//------------------------------backedge---------------------------------------
// Edge e completes a loop in a trace. If the target block is head of the
// loop, rotate the loop block so that the loop ends in a conditional branch.
bool Trace::backedge(CFGEdge *e) {
@@ -1463,14 +1426,12 @@
return loop_rotated;
}
-//------------------------------fixup_blocks-----------------------------------
// push blocks onto the CFG list
// ensure that blocks have the correct two-way branch sense
void Trace::fixup_blocks(PhaseCFG &cfg) {
Block *last = last_block();
for (Block *b = first_block(); b != NULL; b = next(b)) {
- cfg._blocks.push(b);
- cfg._num_blocks++;
+ cfg.add_block(b);
if (!b->is_connector()) {
int nfallthru = b->num_fall_throughs();
if (b != last) {
--- a/hotspot/src/share/vm/opto/block.hpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/block.hpp Mon Aug 19 09:33:29 2013 +0200
@@ -348,20 +348,77 @@
class PhaseCFG : public Phase {
friend class VMStructs;
private:
+
+ // Root of whole program
+ RootNode* _root;
+
+ // The block containing the root node
+ Block* _root_block;
+
+ // List of basic blocks that are created during CFG creation
+ Block_List _blocks;
+
+ // Count of basic blocks
+ uint _number_of_blocks;
+
// Arena for the blocks to be stored in
Arena* _block_arena;
+ // The matcher for this compilation
+ Matcher& _matcher;
+
// Map nodes to owning basic block
Block_Array _node_to_block_mapping;
+ // Loop from the root
+ CFGLoop* _root_loop;
+
+ // Outmost loop frequency
+ float _outer_loop_frequency;
+
+ // Per node latency estimation, valid only during GCM
+ GrowableArray<uint>* _node_latency;
+
// Build a proper looking cfg. Return count of basic blocks
uint build_cfg();
- // Perform DFS search.
+ // Build the dominator tree so that we know where we can move instructions
+ void build_dominator_tree();
+
+ // Estimate block frequencies based on IfNode probabilities, so that we know where we want to move instructions
+ void estimate_block_frequency();
+
+ // Global Code Motion. See Click's PLDI95 paper. Place Nodes in specific
+ // basic blocks; i.e. _node_to_block_mapping now maps _idx for all Nodes to some Block.
+ // Move nodes to ensure correctness from GVN and also try to move nodes out of loops.
+ void global_code_motion();
+
+ // Schedule Nodes early in their basic blocks.
+ bool schedule_early(VectorSet &visited, Node_List &roots);
+
+ // For each node, find the latest block it can be scheduled into
+ // and then select the cheapest block between the latest and earliest
+ // block to place the node.
+ void schedule_late(VectorSet &visited, Node_List &stack);
+
+ // Compute the (backwards) latency of a node from a single use
+ int latency_from_use(Node *n, const Node *def, Node *use);
+
+ // Compute the (backwards) latency of a node from the uses of this instruction
+ void partial_latency_of_defs(Node *n);
+
+ // Compute the instruction global latency with a backwards walk
+ void compute_latencies_backwards(VectorSet &visited, Node_List &stack);
+
+ // Pick a block between early and late that is a cheaper alternative
+ // to late. Helper for schedule_late.
+ Block* hoist_to_cheaper_block(Block* LCA, Block* early, Node* self);
+
+ // Perform a Depth First Search (DFS).
// Setup 'vertex' as DFS to vertex mapping.
// Setup 'semi' as vertex to DFS mapping.
// Set 'parent' to DFS parent.
- uint DFS( Tarjan *tarjan );
+ uint do_DFS(Tarjan* tarjan, uint rpo_counter);
// Helper function to insert a node into a block
void schedule_node_into_block( Node *n, Block *b );
@@ -372,7 +429,8 @@
void schedule_pinned_nodes( VectorSet &visited );
// I'll need a few machine-specific GotoNodes. Clone from this one.
- MachNode *_goto;
+ // Used when building the CFG and creating end nodes for blocks.
+ MachNode* _goto;
Block* insert_anti_dependences(Block* LCA, Node* load, bool verify = false);
void verify_anti_dependences(Block* LCA, Node* load) {
@@ -380,17 +438,77 @@
insert_anti_dependences(LCA, load, true);
}
+ bool move_to_next(Block* bx, uint b_index);
+ void move_to_end(Block* bx, uint b_index);
+
+ void insert_goto_at(uint block_no, uint succ_no);
+
+ // Check for NeverBranch at block end. This needs to become a GOTO to the
+ // true target. NeverBranch are treated as a conditional branch that always
+ // goes the same direction for most of the optimizer and are used to give a
+ // fake exit path to infinite loops. At this late stage they need to turn
+ // into Goto's so that when you enter the infinite loop you indeed hang.
+ void convert_NeverBranch_to_Goto(Block *b);
+
+ CFGLoop* create_loop_tree();
+
+ #ifndef PRODUCT
+ bool _trace_opto_pipelining; // tracing flag
+ #endif
+
public:
PhaseCFG(Arena* arena, RootNode* root, Matcher& matcher);
- uint _num_blocks; // Count of basic blocks
- Block_List _blocks; // List of basic blocks
- RootNode *_root; // Root of whole program
- Block *_broot; // Basic block of root
- uint _rpo_ctr;
- CFGLoop* _root_loop;
- float _outer_loop_freq; // Outmost loop frequency
+ void set_latency_for_node(Node* node, int latency) {
+ _node_latency->at_put_grow(node->_idx, latency);
+ }
+
+ uint get_latency_for_node(Node* node) {
+ return _node_latency->at_grow(node->_idx);
+ }
+
+ // Get the outer most frequency
+ float get_outer_loop_frequency() const {
+ return _outer_loop_frequency;
+ }
+
+ // Get the root node of the CFG
+ RootNode* get_root_node() const {
+ return _root;
+ }
+
+ // Get the block of the root node
+ Block* get_root_block() const {
+ return _root_block;
+ }
+ // Add a block at a position and moves the later ones one step
+ void add_block_at(uint pos, Block* block) {
+ _blocks.insert(pos, block);
+ _number_of_blocks++;
+ }
+
+ // Adds a block to the top of the block list
+ void add_block(Block* block) {
+ _blocks.push(block);
+ _number_of_blocks++;
+ }
+
+ // Clear the list of blocks
+ void clear_blocks() {
+ _blocks.reset();
+ _number_of_blocks = 0;
+ }
+
+ // Get the block at position pos in _blocks
+ Block* get_block(uint pos) const {
+ return _blocks[pos];
+ }
+
+ // Number of blocks
+ uint number_of_blocks() const {
+ return _number_of_blocks;
+ }
// set which block this node should reside in
void map_node_to_block(const Node* node, Block* block) {
@@ -412,72 +530,26 @@
return (_node_to_block_mapping.lookup(node->_idx) != NULL);
}
- // Per node latency estimation, valid only during GCM
- GrowableArray<uint> *_node_latency;
-
-#ifndef PRODUCT
- bool _trace_opto_pipelining; // tracing flag
-#endif
-
#ifdef ASSERT
Unique_Node_List _raw_oops;
#endif
- // Build dominators
- void Dominators();
-
- // Estimate block frequencies based on IfNode probabilities
- void Estimate_Block_Frequency();
-
- // Global Code Motion. See Click's PLDI95 paper. Place Nodes in specific
- // basic blocks; i.e. _node_to_block_mapping now maps _idx for all Nodes to some Block.
- void GlobalCodeMotion( Matcher &m, uint unique, Node_List &proj_list );
+ // Do global code motion by first building dominator tree and estimate block frequency
+ // Returns true on success
+ bool do_global_code_motion();
// Compute the (backwards) latency of a node from the uses
void latency_from_uses(Node *n);
- // Compute the (backwards) latency of a node from a single use
- int latency_from_use(Node *n, const Node *def, Node *use);
-
- // Compute the (backwards) latency of a node from the uses of this instruction
- void partial_latency_of_defs(Node *n);
-
- // Schedule Nodes early in their basic blocks.
- bool schedule_early(VectorSet &visited, Node_List &roots);
-
- // For each node, find the latest block it can be scheduled into
- // and then select the cheapest block between the latest and earliest
- // block to place the node.
- void schedule_late(VectorSet &visited, Node_List &stack);
-
- // Pick a block between early and late that is a cheaper alternative
- // to late. Helper for schedule_late.
- Block* hoist_to_cheaper_block(Block* LCA, Block* early, Node* self);
-
- // Compute the instruction global latency with a backwards walk
- void ComputeLatenciesBackwards(VectorSet &visited, Node_List &stack);
-
// Set loop alignment
void set_loop_alignment();
// Remove empty basic blocks
- void remove_empty();
+ void remove_empty_blocks();
void fixup_flow();
- bool move_to_next(Block* bx, uint b_index);
- void move_to_end(Block* bx, uint b_index);
- void insert_goto_at(uint block_no, uint succ_no);
- // Check for NeverBranch at block end. This needs to become a GOTO to the
- // true target. NeverBranch are treated as a conditional branch that always
- // goes the same direction for most of the optimizer and are used to give a
- // fake exit path to infinite loops. At this late stage they need to turn
- // into Goto's so that when you enter the infinite loop you indeed hang.
- void convert_NeverBranch_to_Goto(Block *b);
-
- CFGLoop* create_loop_tree();
-
- // Insert a node into a block, and update the _bbs
- void insert( Block *b, uint idx, Node *n ) {
+ // Insert a node into a block at index and map the node to the block
+ void insert(Block *b, uint idx, Node *n) {
b->_nodes.insert( idx, n );
map_node_to_block(n, b);
}
--- a/hotspot/src/share/vm/opto/buildOopMap.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/buildOopMap.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -87,7 +87,6 @@
// OptoReg::Bad for not-callee-saved.
-//------------------------------OopFlow----------------------------------------
// Structure to pass around
struct OopFlow : public ResourceObj {
short *_callees; // Array mapping register to callee-saved
@@ -119,7 +118,6 @@
OopMap *build_oop_map( Node *n, int max_reg, PhaseRegAlloc *regalloc, int* live );
};
-//------------------------------compute_reach----------------------------------
// Given reaching-defs for this block start, compute it for this block end
void OopFlow::compute_reach( PhaseRegAlloc *regalloc, int max_reg, Dict *safehash ) {
@@ -177,7 +175,6 @@
}
}
-//------------------------------merge------------------------------------------
// Merge the given flow into the 'this' flow
void OopFlow::merge( OopFlow *flow, int max_reg ) {
assert( _b == NULL, "merging into a happy flow" );
@@ -197,14 +194,12 @@
}
-//------------------------------clone------------------------------------------
void OopFlow::clone( OopFlow *flow, int max_size ) {
_b = flow->_b;
memcpy( _callees, flow->_callees, sizeof(short)*max_size);
memcpy( _defs , flow->_defs , sizeof(Node*)*max_size);
}
-//------------------------------make-------------------------------------------
OopFlow *OopFlow::make( Arena *A, int max_size, Compile* C ) {
short *callees = NEW_ARENA_ARRAY(A,short,max_size+1);
Node **defs = NEW_ARENA_ARRAY(A,Node*,max_size+1);
@@ -215,7 +210,6 @@
return flow;
}
-//------------------------------bit twiddlers----------------------------------
static int get_live_bit( int *live, int reg ) {
return live[reg>>LogBitsPerInt] & (1<<(reg&(BitsPerInt-1))); }
static void set_live_bit( int *live, int reg ) {
@@ -223,7 +217,6 @@
static void clr_live_bit( int *live, int reg ) {
live[reg>>LogBitsPerInt] &= ~(1<<(reg&(BitsPerInt-1))); }
-//------------------------------build_oop_map----------------------------------
// Build an oopmap from the current flow info
OopMap *OopFlow::build_oop_map( Node *n, int max_reg, PhaseRegAlloc *regalloc, int* live ) {
int framesize = regalloc->_framesize;
@@ -412,19 +405,18 @@
return omap;
}
-//------------------------------do_liveness------------------------------------
// Compute backwards liveness on registers
-static void do_liveness( PhaseRegAlloc *regalloc, PhaseCFG *cfg, Block_List *worklist, int max_reg_ints, Arena *A, Dict *safehash ) {
- int *live = NEW_ARENA_ARRAY(A, int, (cfg->_num_blocks+1) * max_reg_ints);
- int *tmp_live = &live[cfg->_num_blocks * max_reg_ints];
- Node *root = cfg->C->root();
+static void do_liveness(PhaseRegAlloc* regalloc, PhaseCFG* cfg, Block_List* worklist, int max_reg_ints, Arena* A, Dict* safehash) {
+ int* live = NEW_ARENA_ARRAY(A, int, (cfg->number_of_blocks() + 1) * max_reg_ints);
+ int* tmp_live = &live[cfg->number_of_blocks() * max_reg_ints];
+ Node* root = cfg->get_root_node();
// On CISC platforms, get the node representing the stack pointer that regalloc
// used for spills
Node *fp = NodeSentinel;
if (UseCISCSpill && root->req() > 1) {
fp = root->in(1)->in(TypeFunc::FramePtr);
}
- memset( live, 0, cfg->_num_blocks * (max_reg_ints<<LogBytesPerInt) );
+ memset(live, 0, cfg->number_of_blocks() * (max_reg_ints << LogBytesPerInt));
// Push preds onto worklist
for (uint i = 1; i < root->req(); i++) {
Block* block = cfg->get_block_for_node(root->in(i));
@@ -549,29 +541,32 @@
// Scan for any missing safepoints. Happens to infinite loops
// ala ZKM.jar
uint i;
- for( i=1; i<cfg->_num_blocks; i++ ) {
- Block *b = cfg->_blocks[i];
+ for (i = 1; i < cfg->number_of_blocks(); i++) {
+ Block* block = cfg->get_block(i);
uint j;
- for( j=1; j<b->_nodes.size(); j++ )
- if( b->_nodes[j]->jvms() &&
- (*safehash)[b->_nodes[j]] == NULL )
+ for (j = 1; j < block->_nodes.size(); j++) {
+ if (block->_nodes[j]->jvms() && (*safehash)[block->_nodes[j]] == NULL) {
break;
- if( j<b->_nodes.size() ) break;
+ }
+ }
+ if (j < block->_nodes.size()) {
+ break;
+ }
}
- if( i == cfg->_num_blocks )
+ if (i == cfg->number_of_blocks()) {
break; // Got 'em all
+ }
#ifndef PRODUCT
if( PrintOpto && Verbose )
tty->print_cr("retripping live calc");
#endif
// Force the issue (expensively): recheck everybody
- for( i=1; i<cfg->_num_blocks; i++ )
- worklist->push(cfg->_blocks[i]);
+ for (i = 1; i < cfg->number_of_blocks(); i++) {
+ worklist->push(cfg->get_block(i));
+ }
}
-
}
-//------------------------------BuildOopMaps-----------------------------------
// Collect GC mask info - where are all the OOPs?
void Compile::BuildOopMaps() {
NOT_PRODUCT( TracePhase t3("bldOopMaps", &_t_buildOopMaps, TimeCompiler); )
@@ -592,12 +587,12 @@
OopFlow *free_list = NULL; // Free, unused
// Array mapping blocks to completed oopflows
- OopFlow **flows = NEW_ARENA_ARRAY(A, OopFlow*, _cfg->_num_blocks);
- memset( flows, 0, _cfg->_num_blocks*sizeof(OopFlow*) );
+ OopFlow **flows = NEW_ARENA_ARRAY(A, OopFlow*, _cfg->number_of_blocks());
+ memset( flows, 0, _cfg->number_of_blocks() * sizeof(OopFlow*) );
// Do the first block 'by hand' to prime the worklist
- Block *entry = _cfg->_blocks[1];
+ Block *entry = _cfg->get_block(1);
OopFlow *rootflow = OopFlow::make(A,max_reg,this);
// Initialize to 'bottom' (not 'top')
memset( rootflow->_callees, OptoReg::Bad, max_reg*sizeof(short) );
@@ -623,7 +618,9 @@
Block *b = worklist.pop();
// Ignore root block
- if( b == _cfg->_broot ) continue;
+ if (b == _cfg->get_root_block()) {
+ continue;
+ }
// Block is already done? Happens if block has several predecessors,
// he can get on the worklist more than once.
if( flows[b->_pre_order] ) continue;
--- a/hotspot/src/share/vm/opto/chaitin.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/chaitin.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -40,10 +40,8 @@
#include "opto/opcodes.hpp"
#include "opto/rootnode.hpp"
-//=============================================================================
-
#ifndef PRODUCT
-void LRG::dump( ) const {
+void LRG::dump() const {
ttyLocker ttyl;
tty->print("%d ",num_regs());
_mask.dump();
@@ -94,7 +92,6 @@
}
#endif
-//------------------------------score------------------------------------------
// Compute score from cost and area. Low score is best to spill.
static double raw_score( double cost, double area ) {
return cost - (area*RegisterCostAreaRatio) * 1.52588e-5;
@@ -125,7 +122,6 @@
return score;
}
-//------------------------------LRG_List---------------------------------------
LRG_List::LRG_List( uint max ) : _cnt(max), _max(max), _lidxs(NEW_RESOURCE_ARRAY(uint,max)) {
memset( _lidxs, 0, sizeof(uint)*max );
}
@@ -211,7 +207,6 @@
return next;
}
-//------------------------------Chaitin----------------------------------------
PhaseChaitin::PhaseChaitin(uint unique, PhaseCFG &cfg, Matcher &matcher)
: PhaseRegAlloc(unique, cfg, matcher,
#ifndef PRODUCT
@@ -232,31 +227,31 @@
{
NOT_PRODUCT( Compile::TracePhase t3("ctorChaitin", &_t_ctorChaitin, TimeCompiler); )
- _high_frequency_lrg = MIN2(float(OPTO_LRG_HIGH_FREQ), _cfg._outer_loop_freq);
+ _high_frequency_lrg = MIN2(float(OPTO_LRG_HIGH_FREQ), _cfg.get_outer_loop_frequency());
// Build a list of basic blocks, sorted by frequency
- _blks = NEW_RESOURCE_ARRAY( Block *, _cfg._num_blocks );
+ _blks = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks());
// Experiment with sorting strategies to speed compilation
double cutoff = BLOCK_FREQUENCY(1.0); // Cutoff for high frequency bucket
Block **buckets[NUMBUCKS]; // Array of buckets
uint buckcnt[NUMBUCKS]; // Array of bucket counters
double buckval[NUMBUCKS]; // Array of bucket value cutoffs
for (uint i = 0; i < NUMBUCKS; i++) {
- buckets[i] = NEW_RESOURCE_ARRAY(Block *, _cfg._num_blocks);
+ buckets[i] = NEW_RESOURCE_ARRAY(Block *, _cfg.number_of_blocks());
buckcnt[i] = 0;
// Bump by three orders of magnitude each time
cutoff *= 0.001;
buckval[i] = cutoff;
- for (uint j = 0; j < _cfg._num_blocks; j++) {
+ for (uint j = 0; j < _cfg.number_of_blocks(); j++) {
buckets[i][j] = NULL;
}
}
// Sort blocks into buckets
- for (uint i = 0; i < _cfg._num_blocks; i++) {
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
for (uint j = 0; j < NUMBUCKS; j++) {
- if ((j == NUMBUCKS - 1) || (_cfg._blocks[i]->_freq > buckval[j])) {
+ if ((j == NUMBUCKS - 1) || (_cfg.get_block(i)->_freq > buckval[j])) {
// Assign block to end of list for appropriate bucket
- buckets[j][buckcnt[j]++] = _cfg._blocks[i];
+ buckets[j][buckcnt[j]++] = _cfg.get_block(i);
break; // kick out of inner loop
}
}
@@ -269,10 +264,9 @@
}
}
- assert(blkcnt == _cfg._num_blocks, "Block array not totally filled");
+ assert(blkcnt == _cfg.number_of_blocks(), "Block array not totally filled");
}
-//------------------------------Union------------------------------------------
// union 2 sets together.
void PhaseChaitin::Union( const Node *src_n, const Node *dst_n ) {
uint src = _lrg_map.find(src_n);
@@ -285,7 +279,6 @@
_lrg_map.uf_map(dst, src);
}
-//------------------------------new_lrg----------------------------------------
void PhaseChaitin::new_lrg(const Node *x, uint lrg) {
// Make the Node->LRG mapping
_lrg_map.extend(x->_idx,lrg);
@@ -294,24 +287,28 @@
}
-bool PhaseChaitin::clone_projs_shared(Block *b, uint idx, Node *con, Node *copy, uint max_lrg_id) {
- Block* bcon = _cfg.get_block_for_node(con);
- uint cindex = bcon->find_node(con);
- Node *con_next = bcon->_nodes[cindex+1];
- if (con_next->in(0) != con || !con_next->is_MachProj()) {
- return false; // No MachProj's follow
+int PhaseChaitin::clone_projs(Block* b, uint idx, Node* orig, Node* copy, uint& max_lrg_id) {
+ assert(b->find_node(copy) == (idx - 1), "incorrect insert index for copy kill projections");
+ DEBUG_ONLY( Block* borig = _cfg.get_block_for_node(orig); )
+ int found_projs = 0;
+ uint cnt = orig->outcnt();
+ for (uint i = 0; i < cnt; i++) {
+ Node* proj = orig->raw_out(i);
+ if (proj->is_MachProj()) {
+ assert(proj->outcnt() == 0, "only kill projections are expected here");
+ assert(_cfg.get_block_for_node(proj) == borig, "incorrect block for kill projections");
+ found_projs++;
+ // Copy kill projections after the cloned node
+ Node* kills = proj->clone();
+ kills->set_req(0, copy);
+ b->_nodes.insert(idx++, kills);
+ _cfg.map_node_to_block(kills, b);
+ new_lrg(kills, max_lrg_id++);
+ }
}
-
- // Copy kills after the cloned constant
- Node *kills = con_next->clone();
- kills->set_req(0, copy);
- b->_nodes.insert(idx, kills);
- _cfg.map_node_to_block(kills, b);
- new_lrg(kills, max_lrg_id);
- return true;
+ return found_projs;
}
-//------------------------------compact----------------------------------------
// Renumber the live ranges to compact them. Makes the IFG smaller.
void PhaseChaitin::compact() {
// Current the _uf_map contains a series of short chains which are headed
@@ -677,20 +674,19 @@
C->set_indexSet_arena(NULL); // ResourceArea is at end of scope
}
-//------------------------------de_ssa-----------------------------------------
void PhaseChaitin::de_ssa() {
// Set initial Names for all Nodes. Most Nodes get the virtual register
// number. A few get the ZERO live range number. These do not
// get allocated, but instead rely on correct scheduling to ensure that
// only one instance is simultaneously live at a time.
uint lr_counter = 1;
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
- uint cnt = b->_nodes.size();
+ for( uint i = 0; i < _cfg.number_of_blocks(); i++ ) {
+ Block* block = _cfg.get_block(i);
+ uint cnt = block->_nodes.size();
// Handle all the normal Nodes in the block
for( uint j = 0; j < cnt; j++ ) {
- Node *n = b->_nodes[j];
+ Node *n = block->_nodes[j];
// Pre-color to the zero live range, or pick virtual register
const RegMask &rm = n->out_RegMask();
_lrg_map.map(n->_idx, rm.is_NotEmpty() ? lr_counter++ : 0);
@@ -701,52 +697,55 @@
}
-//------------------------------gather_lrg_masks-------------------------------
// Gather LiveRanGe information, including register masks. Modification of
// cisc spillable in_RegMasks should not be done before AggressiveCoalesce.
void PhaseChaitin::gather_lrg_masks( bool after_aggressive ) {
// Nail down the frame pointer live range
- uint fp_lrg = _lrg_map.live_range_id(_cfg._root->in(1)->in(TypeFunc::FramePtr));
+ uint fp_lrg = _lrg_map.live_range_id(_cfg.get_root_node()->in(1)->in(TypeFunc::FramePtr));
lrgs(fp_lrg)._cost += 1e12; // Cost is infinite
// For all blocks
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
// For all instructions
- for( uint j = 1; j < b->_nodes.size(); j++ ) {
- Node *n = b->_nodes[j];
+ for (uint j = 1; j < block->_nodes.size(); j++) {
+ Node* n = block->_nodes[j];
uint input_edge_start =1; // Skip control most nodes
- if( n->is_Mach() ) input_edge_start = n->as_Mach()->oper_input_base();
+ if (n->is_Mach()) {
+ input_edge_start = n->as_Mach()->oper_input_base();
+ }
uint idx = n->is_Copy();
// Get virtual register number, same as LiveRanGe index
uint vreg = _lrg_map.live_range_id(n);
- LRG &lrg = lrgs(vreg);
- if( vreg ) { // No vreg means un-allocable (e.g. memory)
+ LRG& lrg = lrgs(vreg);
+ if (vreg) { // No vreg means un-allocable (e.g. memory)
// Collect has-copy bit
- if( idx ) {
+ if (idx) {
lrg._has_copy = 1;
uint clidx = _lrg_map.live_range_id(n->in(idx));
- LRG ©_src = lrgs(clidx);
+ LRG& copy_src = lrgs(clidx);
copy_src._has_copy = 1;
}
// Check for float-vs-int live range (used in register-pressure
// calculations)
const Type *n_type = n->bottom_type();
- if (n_type->is_floatingpoint())
+ if (n_type->is_floatingpoint()) {
lrg._is_float = 1;
+ }
// Check for twice prior spilling. Once prior spilling might have
// spilled 'soft', 2nd prior spill should have spilled 'hard' and
// further spilling is unlikely to make progress.
- if( _spilled_once.test(n->_idx) ) {
+ if (_spilled_once.test(n->_idx)) {
lrg._was_spilled1 = 1;
- if( _spilled_twice.test(n->_idx) )
+ if (_spilled_twice.test(n->_idx)) {
lrg._was_spilled2 = 1;
+ }
}
#ifndef PRODUCT
@@ -783,16 +782,18 @@
// Check for bound register masks
const RegMask &lrgmask = lrg.mask();
- if (lrgmask.is_bound(ireg))
+ if (lrgmask.is_bound(ireg)) {
lrg._is_bound = 1;
+ }
// Check for maximum frequency value
- if (lrg._maxfreq < b->_freq)
- lrg._maxfreq = b->_freq;
+ if (lrg._maxfreq < block->_freq) {
+ lrg._maxfreq = block->_freq;
+ }
// Check for oop-iness, or long/double
// Check for multi-kill projection
- switch( ireg ) {
+ switch (ireg) {
case MachProjNode::fat_proj:
// Fat projections have size equal to number of registers killed
lrg.set_num_regs(rm.Size());
@@ -962,7 +963,7 @@
// AggressiveCoalesce. This effectively pre-virtual-splits
// around uncommon uses of common defs.
const RegMask &rm = n->in_RegMask(k);
- if (!after_aggressive && _cfg.get_block_for_node(n->in(k))->_freq > 1000 * b->_freq) {
+ if (!after_aggressive && _cfg.get_block_for_node(n->in(k))->_freq > 1000 * block->_freq) {
// Since we are BEFORE aggressive coalesce, leave the register
// mask untrimmed by the call. This encourages more coalescing.
// Later, AFTER aggressive, this live range will have to spill
@@ -1006,8 +1007,9 @@
}
// Check for maximum frequency value
- if( lrg._maxfreq < b->_freq )
- lrg._maxfreq = b->_freq;
+ if (lrg._maxfreq < block->_freq) {
+ lrg._maxfreq = block->_freq;
+ }
} // End for all allocated inputs
} // end for all instructions
@@ -1029,7 +1031,6 @@
}
}
-//------------------------------set_was_low------------------------------------
// Set the was-lo-degree bit. Conservative coalescing should not change the
// colorability of the graph. If any live range was of low-degree before
// coalescing, it should Simplify. This call sets the was-lo-degree bit.
@@ -1066,7 +1067,6 @@
#define REGISTER_CONSTRAINED 16
-//------------------------------cache_lrg_info---------------------------------
// Compute cost/area ratio, in case we spill. Build the lo-degree list.
void PhaseChaitin::cache_lrg_info( ) {
@@ -1100,7 +1100,6 @@
}
}
-//------------------------------Pre-Simplify-----------------------------------
// Simplify the IFG by removing LRGs of low degree that have NO copies
void PhaseChaitin::Pre_Simplify( ) {
@@ -1151,7 +1150,6 @@
// No more lo-degree no-copy live ranges to simplify
}
-//------------------------------Simplify---------------------------------------
// Simplify the IFG by removing LRGs of low degree.
void PhaseChaitin::Simplify( ) {
@@ -1288,7 +1286,6 @@
}
-//------------------------------is_legal_reg-----------------------------------
// Is 'reg' register legal for 'lrg'?
static bool is_legal_reg(LRG &lrg, OptoReg::Name reg, int chunk) {
if (reg >= chunk && reg < (chunk + RegMask::CHUNK_SIZE) &&
@@ -1315,7 +1312,6 @@
return false;
}
-//------------------------------bias_color-------------------------------------
// Choose a color using the biasing heuristic
OptoReg::Name PhaseChaitin::bias_color( LRG &lrg, int chunk ) {
@@ -1377,7 +1373,6 @@
return OptoReg::add( reg, chunk );
}
-//------------------------------choose_color-----------------------------------
// Choose a color in the current chunk
OptoReg::Name PhaseChaitin::choose_color( LRG &lrg, int chunk ) {
assert( C->in_preserve_stack_slots() == 0 || chunk != 0 || lrg._is_bound || lrg.mask().is_bound1() || !lrg.mask().Member(OptoReg::Name(_matcher._old_SP-1)), "must not allocate stack0 (inside preserve area)");
@@ -1399,7 +1394,6 @@
return lrg.mask().find_last_elem();
}
-//------------------------------Select-----------------------------------------
// Select colors by re-inserting LRGs back into the IFG. LRGs are re-inserted
// in reverse order of removal. As long as nothing of hi-degree was yanked,
// everything going back is guaranteed a color. Select that color. If some
@@ -1574,8 +1568,6 @@
return spill_reg-LRG::SPILL_REG; // Return number of spills
}
-
-//------------------------------copy_was_spilled-------------------------------
// Copy 'was_spilled'-edness from the source Node to the dst Node.
void PhaseChaitin::copy_was_spilled( Node *src, Node *dst ) {
if( _spilled_once.test(src->_idx) ) {
@@ -1588,14 +1580,12 @@
}
}
-//------------------------------set_was_spilled--------------------------------
// Set the 'spilled_once' or 'spilled_twice' flag on a node.
void PhaseChaitin::set_was_spilled( Node *n ) {
if( _spilled_once.test_set(n->_idx) )
_spilled_twice.set(n->_idx);
}
-//------------------------------fixup_spills-----------------------------------
// Convert Ideal spill instructions into proper FramePtr + offset Loads and
// Stores. Use-def chains are NOT preserved, but Node->LRG->reg maps are.
void PhaseChaitin::fixup_spills() {
@@ -1605,16 +1595,16 @@
NOT_PRODUCT( Compile::TracePhase t3("fixupSpills", &_t_fixupSpills, TimeCompiler); )
// Grab the Frame Pointer
- Node *fp = _cfg._broot->head()->in(1)->in(TypeFunc::FramePtr);
+ Node *fp = _cfg.get_root_block()->head()->in(1)->in(TypeFunc::FramePtr);
// For all blocks
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
// For all instructions in block
- uint last_inst = b->end_idx();
- for( uint j = 1; j <= last_inst; j++ ) {
- Node *n = b->_nodes[j];
+ uint last_inst = block->end_idx();
+ for (uint j = 1; j <= last_inst; j++) {
+ Node* n = block->_nodes[j];
// Dead instruction???
assert( n->outcnt() != 0 ||// Nothing dead after post alloc
@@ -1651,7 +1641,7 @@
assert( cisc->oper_input_base() == 2, "Only adding one edge");
cisc->ins_req(1,src); // Requires a memory edge
}
- b->_nodes.map(j,cisc); // Insert into basic block
+ block->_nodes.map(j,cisc); // Insert into basic block
n->subsume_by(cisc, C); // Correct graph
//
++_used_cisc_instructions;
@@ -1677,7 +1667,6 @@
} // End of for all blocks
}
-//------------------------------find_base_for_derived--------------------------
// Helper to stretch above; recursively discover the base Node for a
// given derived Node. Easy for AddP-related machine nodes, but needs
// to be recursive for derived Phis.
@@ -1707,7 +1696,7 @@
// Initialize it once and make it shared:
// set control to _root and place it into Start block
// (where top() node is placed).
- base->init_req(0, _cfg._root);
+ base->init_req(0, _cfg.get_root_node());
Block *startb = _cfg.get_block_for_node(C->top());
startb->_nodes.insert(startb->find_node(C->top()), base );
_cfg.map_node_to_block(base, startb);
@@ -1716,7 +1705,7 @@
if (_lrg_map.live_range_id(base) == 0) {
new_lrg(base, maxlrg++);
}
- assert(base->in(0) == _cfg._root && _cfg.get_block_for_node(base) == _cfg.get_block_for_node(C->top()), "base NULL should be shared");
+ assert(base->in(0) == _cfg.get_root_node() && _cfg.get_block_for_node(base) == _cfg.get_block_for_node(C->top()), "base NULL should be shared");
derived_base_map[derived->_idx] = base;
return base;
}
@@ -1779,8 +1768,6 @@
return base;
}
-
-//------------------------------stretch_base_pointer_live_ranges---------------
// At each Safepoint, insert extra debug edges for each pair of derived value/
// base pointer that is live across the Safepoint for oopmap building. The
// edge pairs get added in after sfpt->jvmtail()->oopoff(), but are in the
@@ -1792,14 +1779,14 @@
memset( derived_base_map, 0, sizeof(Node*)*C->unique() );
// For all blocks in RPO do...
- for( uint i=0; i<_cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
// Note use of deep-copy constructor. I cannot hammer the original
// liveout bits, because they are needed by the following coalesce pass.
- IndexSet liveout(_live->live(b));
+ IndexSet liveout(_live->live(block));
- for( uint j = b->end_idx() + 1; j > 1; j-- ) {
- Node *n = b->_nodes[j-1];
+ for (uint j = block->end_idx() + 1; j > 1; j--) {
+ Node* n = block->_nodes[j - 1];
// Pre-split compares of loop-phis. Loop-phis form a cycle we would
// like to see in the same register. Compare uses the loop-phi and so
@@ -1814,7 +1801,7 @@
Node *phi = n->in(1);
if( phi->is_Phi() && phi->as_Phi()->region()->is_Loop() ) {
Block *phi_block = _cfg.get_block_for_node(phi);
- if (_cfg.get_block_for_node(phi_block->pred(2)) == b) {
+ if (_cfg.get_block_for_node(phi_block->pred(2)) == block) {
const RegMask *mask = C->matcher()->idealreg2spillmask[Op_RegI];
Node *spill = new (C) MachSpillCopyNode( phi, *mask, *mask );
insert_proj( phi_block, 1, spill, maxlrg++ );
@@ -1868,7 +1855,7 @@
if ((_lrg_map.live_range_id(base) >= _lrg_map.max_lrg_id() || // (Brand new base (hence not live) or
!liveout.member(_lrg_map.live_range_id(base))) && // not live) AND
(_lrg_map.live_range_id(base) > 0) && // not a constant
- _cfg.get_block_for_node(base) != b) { // base not def'd in blk)
+ _cfg.get_block_for_node(base) != block) { // base not def'd in blk)
// Base pointer is not currently live. Since I stretched
// the base pointer to here and it crosses basic-block
// boundaries, the global live info is now incorrect.
@@ -1903,15 +1890,12 @@
return must_recompute_live != 0;
}
-
-//------------------------------add_reference----------------------------------
// Extend the node to LRG mapping
void PhaseChaitin::add_reference(const Node *node, const Node *old_node) {
_lrg_map.extend(node->_idx, _lrg_map.live_range_id(old_node));
}
-//------------------------------dump-------------------------------------------
#ifndef PRODUCT
void PhaseChaitin::dump(const Node *n) const {
uint r = (n->_idx < _lrg_map.size()) ? _lrg_map.find_const(n) : 0;
@@ -2017,8 +2001,9 @@
_matcher._new_SP, _framesize );
// For all blocks
- for( uint i = 0; i < _cfg._num_blocks; i++ )
- dump(_cfg._blocks[i]);
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ dump(_cfg.get_block(i));
+ }
// End of per-block dump
tty->print("\n");
@@ -2059,7 +2044,6 @@
tty->print_cr("");
}
-//------------------------------dump_degree_lists------------------------------
void PhaseChaitin::dump_degree_lists() const {
// Dump lo-degree list
tty->print("Lo degree: ");
@@ -2080,7 +2064,6 @@
tty->print_cr("");
}
-//------------------------------dump_simplified--------------------------------
void PhaseChaitin::dump_simplified() const {
tty->print("Simplified: ");
for( uint i = _simplified; i; i = lrgs(i)._next )
@@ -2099,7 +2082,6 @@
return buf+strlen(buf);
}
-//------------------------------dump_register----------------------------------
// Dump a register name into a buffer. Be intelligent if we get called
// before allocation is complete.
char *PhaseChaitin::dump_register( const Node *n, char *buf ) const {
@@ -2133,7 +2115,6 @@
return buf+strlen(buf);
}
-//----------------------dump_for_spill_split_recycle--------------------------
void PhaseChaitin::dump_for_spill_split_recycle() const {
if( WizardMode && (PrintCompilation || PrintOpto) ) {
// Display which live ranges need to be split and the allocator's state
@@ -2149,7 +2130,6 @@
}
}
-//------------------------------dump_frame------------------------------------
void PhaseChaitin::dump_frame() const {
const char *fp = OptoReg::regname(OptoReg::c_frame_pointer);
const TypeTuple *domain = C->tf()->domain();
@@ -2255,17 +2235,16 @@
tty->print_cr("#");
}
-//------------------------------dump_bb----------------------------------------
void PhaseChaitin::dump_bb( uint pre_order ) const {
tty->print_cr("---dump of B%d---",pre_order);
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
- if( b->_pre_order == pre_order )
- dump(b);
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
+ if (block->_pre_order == pre_order) {
+ dump(block);
+ }
}
}
-//------------------------------dump_lrg---------------------------------------
void PhaseChaitin::dump_lrg( uint lidx, bool defs_only ) const {
tty->print_cr("---dump of L%d---",lidx);
@@ -2287,17 +2266,17 @@
tty->cr();
}
// For all blocks
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
int dump_once = 0;
// For all instructions
- for( uint j = 0; j < b->_nodes.size(); j++ ) {
- Node *n = b->_nodes[j];
+ for( uint j = 0; j < block->_nodes.size(); j++ ) {
+ Node *n = block->_nodes[j];
if (_lrg_map.find_const(n) == lidx) {
if (!dump_once++) {
tty->cr();
- b->dump_head(&_cfg);
+ block->dump_head(&_cfg);
}
dump(n);
continue;
@@ -2312,7 +2291,7 @@
if (_lrg_map.find_const(m) == lidx) {
if (!dump_once++) {
tty->cr();
- b->dump_head(&_cfg);
+ block->dump_head(&_cfg);
}
dump(n);
}
@@ -2324,7 +2303,6 @@
}
#endif // not PRODUCT
-//------------------------------print_chaitin_statistics-------------------------------
int PhaseChaitin::_final_loads = 0;
int PhaseChaitin::_final_stores = 0;
int PhaseChaitin::_final_memoves= 0;
--- a/hotspot/src/share/vm/opto/chaitin.hpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/chaitin.hpp Mon Aug 19 09:33:29 2013 +0200
@@ -412,33 +412,22 @@
uint split_DEF( Node *def, Block *b, int loc, uint max, Node **Reachblock, Node **debug_defs, GrowableArray<uint> splits, int slidx );
uint split_USE( Node *def, Block *b, Node *use, uint useidx, uint max, bool def_down, bool cisc_sp, GrowableArray<uint> splits, int slidx );
- bool clone_projs(Block *b, uint idx, Node *con, Node *copy, LiveRangeMap &lrg_map) {
- bool found_projs = clone_projs_shared(b, idx, con, copy, lrg_map.max_lrg_id());
-
- if(found_projs) {
- uint max_lrg_id = lrg_map.max_lrg_id();
- lrg_map.set_max_lrg_id(max_lrg_id + 1);
- }
-
- return found_projs;
- }
-
//------------------------------clone_projs------------------------------------
// After cloning some rematerialized instruction, clone any MachProj's that
// follow it. Example: Intel zero is XOR, kills flags. Sparc FP constants
// use G3 as an address temp.
- bool clone_projs(Block *b, uint idx, Node *con, Node *copy, uint &max_lrg_id) {
- bool found_projs = clone_projs_shared(b, idx, con, copy, max_lrg_id);
+ int clone_projs(Block* b, uint idx, Node* orig, Node* copy, uint& max_lrg_id);
- if(found_projs) {
- max_lrg_id++;
+ int clone_projs(Block* b, uint idx, Node* orig, Node* copy, LiveRangeMap& lrg_map) {
+ uint max_lrg_id = lrg_map.max_lrg_id();
+ int found_projs = clone_projs(b, idx, orig, copy, max_lrg_id);
+ if (found_projs > 0) {
+ // max_lrg_id is updated during call above
+ lrg_map.set_max_lrg_id(max_lrg_id);
}
-
return found_projs;
}
- bool clone_projs_shared(Block *b, uint idx, Node *con, Node *copy, uint max_lrg_id);
-
Node *split_Rematerialize(Node *def, Block *b, uint insidx, uint &maxlrg, GrowableArray<uint> splits,
int slidx, uint *lrg2reach, Node **Reachblock, bool walkThru);
// True if lidx is used before any real register is def'd in the block
--- a/hotspot/src/share/vm/opto/coalesce.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/coalesce.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -34,8 +34,6 @@
#include "opto/matcher.hpp"
#include "opto/regmask.hpp"
-//=============================================================================
-//------------------------------Dump-------------------------------------------
#ifndef PRODUCT
void PhaseCoalesce::dump(Node *n) const {
// Being a const function means I cannot use 'Find'
@@ -43,12 +41,11 @@
tty->print("L%d/N%d ",r,n->_idx);
}
-//------------------------------dump-------------------------------------------
void PhaseCoalesce::dump() const {
// I know I have a block layout now, so I can print blocks in a loop
- for( uint i=0; i<_phc._cfg._num_blocks; i++ ) {
+ for( uint i=0; i<_phc._cfg.number_of_blocks(); i++ ) {
uint j;
- Block *b = _phc._cfg._blocks[i];
+ Block* b = _phc._cfg.get_block(i);
// Print a nice block header
tty->print("B%d: ",b->_pre_order);
for( j=1; j<b->num_preds(); j++ )
@@ -85,7 +82,6 @@
}
#endif
-//------------------------------combine_these_two------------------------------
// Combine the live ranges def'd by these 2 Nodes. N2 is an input to N1.
void PhaseCoalesce::combine_these_two(Node *n1, Node *n2) {
uint lr1 = _phc._lrg_map.find(n1);
@@ -127,18 +123,15 @@
}
}
-//------------------------------coalesce_driver--------------------------------
// Copy coalescing
-void PhaseCoalesce::coalesce_driver( ) {
-
+void PhaseCoalesce::coalesce_driver() {
verify();
// Coalesce from high frequency to low
- for( uint i=0; i<_phc._cfg._num_blocks; i++ )
- coalesce( _phc._blks[i] );
-
+ for (uint i = 0; i < _phc._cfg.number_of_blocks(); i++) {
+ coalesce(_phc._blks[i]);
+ }
}
-//------------------------------insert_copy_with_overlap-----------------------
// I am inserting copies to come out of SSA form. In the general case, I am
// doing a parallel renaming. I'm in the Named world now, so I can't do a
// general parallel renaming. All the copies now use "names" (live-ranges)
@@ -216,7 +209,6 @@
b->_nodes.insert(last_use_idx+1,copy);
}
-//------------------------------insert_copies----------------------------------
void PhaseAggressiveCoalesce::insert_copies( Matcher &matcher ) {
// We do LRGs compressing and fix a liveout data only here since the other
// place in Split() is guarded by the assert which we never hit.
@@ -225,8 +217,8 @@
for (uint lrg = 1; lrg < _phc._lrg_map.max_lrg_id(); lrg++) {
uint compressed_lrg = _phc._lrg_map.find(lrg);
if (lrg != compressed_lrg) {
- for (uint bidx = 0; bidx < _phc._cfg._num_blocks; bidx++) {
- IndexSet *liveout = _phc._live->live(_phc._cfg._blocks[bidx]);
+ for (uint bidx = 0; bidx < _phc._cfg.number_of_blocks(); bidx++) {
+ IndexSet *liveout = _phc._live->live(_phc._cfg.get_block(bidx));
if (liveout->member(lrg)) {
liveout->remove(lrg);
liveout->insert(compressed_lrg);
@@ -239,10 +231,10 @@
// Nodes with index less than '_unique' are original, non-virtual Nodes.
_unique = C->unique();
- for( uint i=0; i<_phc._cfg._num_blocks; i++ ) {
+ for (uint i = 0; i < _phc._cfg.number_of_blocks(); i++) {
C->check_node_count(NodeLimitFudgeFactor, "out of nodes in coalesce");
if (C->failing()) return;
- Block *b = _phc._cfg._blocks[i];
+ Block *b = _phc._cfg.get_block(i);
uint cnt = b->num_preds(); // Number of inputs to the Phi
for( uint l = 1; l<b->_nodes.size(); l++ ) {
@@ -330,9 +322,7 @@
copy = m->clone();
// Insert the copy in the basic block, just before us
b->_nodes.insert(l++, copy);
- if(_phc.clone_projs(b, l, m, copy, _phc._lrg_map)) {
- l++;
- }
+ l += _phc.clone_projs(b, l, m, copy, _phc._lrg_map);
} else {
const RegMask *rm = C->matcher()->idealreg2spillmask[m->ideal_reg()];
copy = new (C) MachSpillCopyNode(m, *rm, *rm);
@@ -403,8 +393,7 @@
} // End of for all blocks
}
-//=============================================================================
-//------------------------------coalesce---------------------------------------
+
// Aggressive (but pessimistic) copy coalescing of a single block
// The following coalesce pass represents a single round of aggressive
@@ -464,20 +453,16 @@
} // End of for all instructions in block
}
-//=============================================================================
-//------------------------------PhaseConservativeCoalesce----------------------
PhaseConservativeCoalesce::PhaseConservativeCoalesce(PhaseChaitin &chaitin) : PhaseCoalesce(chaitin) {
_ulr.initialize(_phc._lrg_map.max_lrg_id());
}
-//------------------------------verify-----------------------------------------
void PhaseConservativeCoalesce::verify() {
#ifdef ASSERT
_phc.set_was_low();
#endif
}
-//------------------------------union_helper-----------------------------------
void PhaseConservativeCoalesce::union_helper( Node *lr1_node, Node *lr2_node, uint lr1, uint lr2, Node *src_def, Node *dst_copy, Node *src_copy, Block *b, uint bindex ) {
// Join live ranges. Merge larger into smaller. Union lr2 into lr1 in the
// union-find tree
@@ -520,7 +505,6 @@
}
}
-//------------------------------compute_separating_interferences---------------
// Factored code from copy_copy that computes extra interferences from
// lengthening a live range by double-coalescing.
uint PhaseConservativeCoalesce::compute_separating_interferences(Node *dst_copy, Node *src_copy, Block *b, uint bindex, RegMask &rm, uint reg_degree, uint rm_size, uint lr1, uint lr2 ) {
@@ -586,7 +570,6 @@
return reg_degree;
}
-//------------------------------update_ifg-------------------------------------
void PhaseConservativeCoalesce::update_ifg(uint lr1, uint lr2, IndexSet *n_lr1, IndexSet *n_lr2) {
// Some original neighbors of lr1 might have gone away
// because the constrained register mask prevented them.
@@ -616,7 +599,6 @@
lrgs(neighbor).inc_degree( lrg1.compute_degree(lrgs(neighbor)) );
}
-//------------------------------record_bias------------------------------------
static void record_bias( const PhaseIFG *ifg, int lr1, int lr2 ) {
// Tag copy bias here
if( !ifg->lrgs(lr1)._copy_bias )
@@ -625,7 +607,6 @@
ifg->lrgs(lr2)._copy_bias = lr1;
}
-//------------------------------copy_copy--------------------------------------
// See if I can coalesce a series of multiple copies together. I need the
// final dest copy and the original src copy. They can be the same Node.
// Compute the compatible register masks.
@@ -785,7 +766,6 @@
return true;
}
-//------------------------------coalesce---------------------------------------
// Conservative (but pessimistic) copy coalescing of a single block
void PhaseConservativeCoalesce::coalesce( Block *b ) {
// Bail out on infrequent blocks
--- a/hotspot/src/share/vm/opto/compile.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/compile.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -2136,7 +2136,9 @@
//------------------------------Code_Gen---------------------------------------
// Given a graph, generate code for it
void Compile::Code_Gen() {
- if (failing()) return;
+ if (failing()) {
+ return;
+ }
// Perform instruction selection. You might think we could reclaim Matcher
// memory PDQ, but actually the Matcher is used in generating spill code.
@@ -2148,12 +2150,11 @@
// nodes. Mapping is only valid at the root of each matched subtree.
NOT_PRODUCT( verify_graph_edges(); )
- Node_List proj_list;
- Matcher m(proj_list);
- _matcher = &m;
+ Matcher matcher;
+ _matcher = &matcher;
{
TracePhase t2("matcher", &_t_matcher, true);
- m.match();
+ matcher.match();
}
// In debug mode can dump m._nodes.dump() for mapping of ideal to machine
// nodes. Mapping is only valid at the root of each matched subtree.
@@ -2161,31 +2162,26 @@
// If you have too many nodes, or if matching has failed, bail out
check_node_count(0, "out of nodes matching instructions");
- if (failing()) return;
+ if (failing()) {
+ return;
+ }
// Build a proper-looking CFG
- PhaseCFG cfg(node_arena(), root(), m);
+ PhaseCFG cfg(node_arena(), root(), matcher);
_cfg = &cfg;
{
NOT_PRODUCT( TracePhase t2("scheduler", &_t_scheduler, TimeCompiler); )
- cfg.Dominators();
- if (failing()) return;
-
- NOT_PRODUCT( verify_graph_edges(); )
-
- cfg.Estimate_Block_Frequency();
- cfg.GlobalCodeMotion(m,unique(),proj_list);
- if (failing()) return;
+ bool success = cfg.do_global_code_motion();
+ if (!success) {
+ return;
+ }
print_method(PHASE_GLOBAL_CODE_MOTION, 2);
-
NOT_PRODUCT( verify_graph_edges(); )
-
debug_only( cfg.verify(); )
}
- NOT_PRODUCT( verify_graph_edges(); )
-
- PhaseChaitin regalloc(unique(), cfg, m);
+
+ PhaseChaitin regalloc(unique(), cfg, matcher);
_regalloc = ®alloc;
{
TracePhase t2("regalloc", &_t_registerAllocation, true);
@@ -2206,7 +2202,7 @@
// can now safely remove it.
{
NOT_PRODUCT( TracePhase t2("blockOrdering", &_t_blockOrdering, TimeCompiler); )
- cfg.remove_empty();
+ cfg.remove_empty_blocks();
if (do_freq_based_layout()) {
PhaseBlockLayout layout(cfg);
} else {
@@ -2253,38 +2249,50 @@
_regalloc->dump_frame();
Node *n = NULL;
- for( uint i=0; i<_cfg->_num_blocks; i++ ) {
- if (VMThread::should_terminate()) { cut_short = true; break; }
- Block *b = _cfg->_blocks[i];
- if (b->is_connector() && !Verbose) continue;
- n = b->_nodes[0];
- if (pcs && n->_idx < pc_limit)
+ for (uint i = 0; i < _cfg->number_of_blocks(); i++) {
+ if (VMThread::should_terminate()) {
+ cut_short = true;
+ break;
+ }
+ Block* block = _cfg->get_block(i);
+ if (block->is_connector() && !Verbose) {
+ continue;
+ }
+ n = block->_nodes[0];
+ if (pcs && n->_idx < pc_limit) {
tty->print("%3.3x ", pcs[n->_idx]);
- else
+ } else {
tty->print(" ");
- b->dump_head(_cfg);
- if (b->is_connector()) {
+ }
+ block->dump_head(_cfg);
+ if (block->is_connector()) {
tty->print_cr(" # Empty connector block");
- } else if (b->num_preds() == 2 && b->pred(1)->is_CatchProj() && b->pred(1)->as_CatchProj()->_con == CatchProjNode::fall_through_index) {
+ } else if (block->num_preds() == 2 && block->pred(1)->is_CatchProj() && block->pred(1)->as_CatchProj()->_con == CatchProjNode::fall_through_index) {
tty->print_cr(" # Block is sole successor of call");
}
// For all instructions
Node *delay = NULL;
- for( uint j = 0; j<b->_nodes.size(); j++ ) {
- if (VMThread::should_terminate()) { cut_short = true; break; }
- n = b->_nodes[j];
+ for (uint j = 0; j < block->_nodes.size(); j++) {
+ if (VMThread::should_terminate()) {
+ cut_short = true;
+ break;
+ }
+ n = block->_nodes[j];
if (valid_bundle_info(n)) {
- Bundle *bundle = node_bundling(n);
+ Bundle* bundle = node_bundling(n);
if (bundle->used_in_unconditional_delay()) {
delay = n;
continue;
}
- if (bundle->starts_bundle())
+ if (bundle->starts_bundle()) {
starts_bundle = '+';
+ }
}
- if (WizardMode) n->dump();
+ if (WizardMode) {
+ n->dump();
+ }
if( !n->is_Region() && // Dont print in the Assembly
!n->is_Phi() && // a few noisely useless nodes
--- a/hotspot/src/share/vm/opto/domgraph.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/domgraph.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -32,9 +32,6 @@
// Portions of code courtesy of Clifford Click
-// Optimization - Graph Style
-
-//------------------------------Tarjan-----------------------------------------
// A data structure that holds all the information needed to find dominators.
struct Tarjan {
Block *_block; // Basic block for this info
@@ -60,23 +57,21 @@
};
-//------------------------------Dominator--------------------------------------
// Compute the dominator tree of the CFG. The CFG must already have been
// constructed. This is the Lengauer & Tarjan O(E-alpha(E,V)) algorithm.
-void PhaseCFG::Dominators( ) {
+void PhaseCFG::build_dominator_tree() {
// Pre-grow the blocks array, prior to the ResourceMark kicking in
- _blocks.map(_num_blocks,0);
+ _blocks.map(number_of_blocks(), 0);
ResourceMark rm;
// Setup mappings from my Graph to Tarjan's stuff and back
// Note: Tarjan uses 1-based arrays
- Tarjan *tarjan = NEW_RESOURCE_ARRAY(Tarjan,_num_blocks+1);
+ Tarjan* tarjan = NEW_RESOURCE_ARRAY(Tarjan, number_of_blocks() + 1);
// Tarjan's algorithm, almost verbatim:
// Step 1:
- _rpo_ctr = _num_blocks;
- uint dfsnum = DFS( tarjan );
- if( dfsnum-1 != _num_blocks ) {// Check for unreachable loops!
+ uint dfsnum = do_DFS(tarjan, number_of_blocks());
+ if (dfsnum - 1 != number_of_blocks()) { // Check for unreachable loops!
// If the returned dfsnum does not match the number of blocks, then we
// must have some unreachable loops. These can be made at any time by
// IterGVN. They are cleaned up by CCP or the loop opts, but the last
@@ -93,14 +88,13 @@
C->record_method_not_compilable("unreachable loop");
return;
}
- _blocks._cnt = _num_blocks;
+ _blocks._cnt = number_of_blocks();
// Tarjan is using 1-based arrays, so these are some initialize flags
tarjan[0]._size = tarjan[0]._semi = 0;
tarjan[0]._label = &tarjan[0];
- uint i;
- for( i=_num_blocks; i>=2; i-- ) { // For all vertices in DFS order
+ for (uint i = number_of_blocks(); i >= 2; i--) { // For all vertices in DFS order
Tarjan *w = &tarjan[i]; // Get vertex from DFS
// Step 2:
@@ -130,19 +124,19 @@
}
// Step 4:
- for( i=2; i <= _num_blocks; i++ ) {
+ for (uint i = 2; i <= number_of_blocks(); i++) {
Tarjan *w = &tarjan[i];
if( w->_dom != &tarjan[w->_semi] )
w->_dom = w->_dom->_dom;
w->_dom_next = w->_dom_child = NULL; // Initialize for building tree later
}
// No immediate dominator for the root
- Tarjan *w = &tarjan[_broot->_pre_order];
+ Tarjan *w = &tarjan[get_root_block()->_pre_order];
w->_dom = NULL;
w->_dom_next = w->_dom_child = NULL; // Initialize for building tree later
// Convert the dominator tree array into my kind of graph
- for( i=1; i<=_num_blocks;i++){// For all Tarjan vertices
+ for(uint i = 1; i <= number_of_blocks(); i++){ // For all Tarjan vertices
Tarjan *t = &tarjan[i]; // Handy access
Tarjan *tdom = t->_dom; // Handy access to immediate dominator
if( tdom ) { // Root has no immediate dominator
@@ -152,11 +146,10 @@
} else
t->_block->_idom = NULL; // Root
}
- w->setdepth( _num_blocks+1 ); // Set depth in dominator tree
+ w->setdepth(number_of_blocks() + 1); // Set depth in dominator tree
}
-//----------------------------Block_Stack--------------------------------------
class Block_Stack {
private:
struct Block_Descr {
@@ -214,7 +207,6 @@
}
};
-//-------------------------most_frequent_successor-----------------------------
// Find the index into the b->succs[] array of the most frequent successor.
uint Block_Stack::most_frequent_successor( Block *b ) {
uint freq_idx = 0;
@@ -258,40 +250,38 @@
return freq_idx;
}
-//------------------------------DFS--------------------------------------------
// Perform DFS search. Setup 'vertex' as DFS to vertex mapping. Setup
// 'semi' as vertex to DFS mapping. Set 'parent' to DFS parent.
-uint PhaseCFG::DFS( Tarjan *tarjan ) {
- Block *b = _broot;
+uint PhaseCFG::do_DFS(Tarjan *tarjan, uint rpo_counter) {
+ Block* root_block = get_root_block();
uint pre_order = 1;
- // Allocate stack of size _num_blocks+1 to avoid frequent realloc
- Block_Stack bstack(tarjan, _num_blocks+1);
+ // Allocate stack of size number_of_blocks() + 1 to avoid frequent realloc
+ Block_Stack bstack(tarjan, number_of_blocks() + 1);
// Push on stack the state for the first block
- bstack.push(pre_order, b);
+ bstack.push(pre_order, root_block);
++pre_order;
while (bstack.is_nonempty()) {
if (!bstack.last_successor()) {
// Walk over all successors in pre-order (DFS).
- Block *s = bstack.next_successor();
- if (s->_pre_order == 0) { // Check for no-pre-order, not-visited
+ Block* next_block = bstack.next_successor();
+ if (next_block->_pre_order == 0) { // Check for no-pre-order, not-visited
// Push on stack the state of successor
- bstack.push(pre_order, s);
+ bstack.push(pre_order, next_block);
++pre_order;
}
}
else {
// Build a reverse post-order in the CFG _blocks array
Block *stack_top = bstack.pop();
- stack_top->_rpo = --_rpo_ctr;
+ stack_top->_rpo = --rpo_counter;
_blocks.map(stack_top->_rpo, stack_top);
}
}
return pre_order;
}
-//------------------------------COMPRESS---------------------------------------
void Tarjan::COMPRESS()
{
assert( _ancestor != 0, "" );
@@ -303,14 +293,12 @@
}
}
-//------------------------------EVAL-------------------------------------------
Tarjan *Tarjan::EVAL() {
if( !_ancestor ) return _label;
COMPRESS();
return (_ancestor->_label->_semi >= _label->_semi) ? _label : _ancestor->_label;
}
-//------------------------------LINK-------------------------------------------
void Tarjan::LINK( Tarjan *w, Tarjan *tarjan0 ) {
Tarjan *s = w;
while( w->_label->_semi < s->_child->_label->_semi ) {
@@ -333,7 +321,6 @@
}
}
-//------------------------------setdepth---------------------------------------
void Tarjan::setdepth( uint stack_size ) {
Tarjan **top = NEW_RESOURCE_ARRAY(Tarjan*, stack_size);
Tarjan **next = top;
@@ -362,8 +349,7 @@
} while (last < top);
}
-//*********************** DOMINATORS ON THE SEA OF NODES***********************
-//------------------------------NTarjan----------------------------------------
+// Compute dominators on the Sea of Nodes form
// A data structure that holds all the information needed to find dominators.
struct NTarjan {
Node *_control; // Control node associated with this info
@@ -396,7 +382,6 @@
#endif
};
-//------------------------------Dominator--------------------------------------
// Compute the dominator tree of the sea of nodes. This version walks all CFG
// nodes (using the is_CFG() call) and places them in a dominator tree. Thus,
// it needs a count of the CFG nodes for the mapping table. This is the
@@ -517,7 +502,6 @@
}
}
-//------------------------------DFS--------------------------------------------
// Perform DFS search. Setup 'vertex' as DFS to vertex mapping. Setup
// 'semi' as vertex to DFS mapping. Set 'parent' to DFS parent.
int NTarjan::DFS( NTarjan *ntarjan, VectorSet &visited, PhaseIdealLoop *pil, uint *dfsorder) {
@@ -560,7 +544,6 @@
return dfsnum;
}
-//------------------------------COMPRESS---------------------------------------
void NTarjan::COMPRESS()
{
assert( _ancestor != 0, "" );
@@ -572,14 +555,12 @@
}
}
-//------------------------------EVAL-------------------------------------------
NTarjan *NTarjan::EVAL() {
if( !_ancestor ) return _label;
COMPRESS();
return (_ancestor->_label->_semi >= _label->_semi) ? _label : _ancestor->_label;
}
-//------------------------------LINK-------------------------------------------
void NTarjan::LINK( NTarjan *w, NTarjan *ntarjan0 ) {
NTarjan *s = w;
while( w->_label->_semi < s->_child->_label->_semi ) {
@@ -602,7 +583,6 @@
}
}
-//------------------------------setdepth---------------------------------------
void NTarjan::setdepth( uint stack_size, uint *dom_depth ) {
NTarjan **top = NEW_RESOURCE_ARRAY(NTarjan*, stack_size);
NTarjan **next = top;
@@ -631,7 +611,6 @@
} while (last < top);
}
-//------------------------------dump-------------------------------------------
#ifndef PRODUCT
void NTarjan::dump(int offset) const {
// Dump the data from this node
--- a/hotspot/src/share/vm/opto/gcm.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/gcm.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -121,27 +121,30 @@
//------------------------------schedule_pinned_nodes--------------------------
// Set the basic block for Nodes pinned into blocks
-void PhaseCFG::schedule_pinned_nodes( VectorSet &visited ) {
+void PhaseCFG::schedule_pinned_nodes(VectorSet &visited) {
// Allocate node stack of size C->unique()+8 to avoid frequent realloc
- GrowableArray <Node *> spstack(C->unique()+8);
+ GrowableArray <Node *> spstack(C->unique() + 8);
spstack.push(_root);
- while ( spstack.is_nonempty() ) {
- Node *n = spstack.pop();
- if( !visited.test_set(n->_idx) ) { // Test node and flag it as visited
- if( n->pinned() && !has_block(n)) { // Pinned? Nail it down!
- assert( n->in(0), "pinned Node must have Control" );
+ while (spstack.is_nonempty()) {
+ Node* node = spstack.pop();
+ if (!visited.test_set(node->_idx)) { // Test node and flag it as visited
+ if (node->pinned() && !has_block(node)) { // Pinned? Nail it down!
+ assert(node->in(0), "pinned Node must have Control");
// Before setting block replace block_proj control edge
- replace_block_proj_ctrl(n);
- Node *input = n->in(0);
+ replace_block_proj_ctrl(node);
+ Node* input = node->in(0);
while (!input->is_block_start()) {
input = input->in(0);
}
- Block *b = get_block_for_node(input); // Basic block of controlling input
- schedule_node_into_block(n, b);
+ Block* block = get_block_for_node(input); // Basic block of controlling input
+ schedule_node_into_block(node, block);
}
- for( int i = n->req() - 1; i >= 0; --i ) { // For all inputs
- if( n->in(i) != NULL )
- spstack.push(n->in(i));
+
+ // process all inputs that are non NULL
+ for (int i = node->req() - 1; i >= 0; --i) {
+ if (node->in(i) != NULL) {
+ spstack.push(node->in(i));
+ }
}
}
}
@@ -205,32 +208,29 @@
// which all their inputs occur.
bool PhaseCFG::schedule_early(VectorSet &visited, Node_List &roots) {
// Allocate stack with enough space to avoid frequent realloc
- Node_Stack nstack(roots.Size() + 8); // (unique >> 1) + 24 from Java2D stats
- // roots.push(_root); _root will be processed among C->top() inputs
+ Node_Stack nstack(roots.Size() + 8);
+ // _root will be processed among C->top() inputs
roots.push(C->top());
visited.set(C->top()->_idx);
while (roots.size() != 0) {
// Use local variables nstack_top_n & nstack_top_i to cache values
// on stack's top.
- Node *nstack_top_n = roots.pop();
- uint nstack_top_i = 0;
-//while_nstack_nonempty:
+ Node* parent_node = roots.pop();
+ uint input_index = 0;
+
while (true) {
- // Get parent node and next input's index from stack's top.
- Node *n = nstack_top_n;
- uint i = nstack_top_i;
-
- if (i == 0) {
+ if (input_index == 0) {
// Fixup some control. Constants without control get attached
// to root and nodes that use is_block_proj() nodes should be attached
// to the region that starts their block.
- const Node *in0 = n->in(0);
- if (in0 != NULL) { // Control-dependent?
- replace_block_proj_ctrl(n);
- } else { // n->in(0) == NULL
- if (n->req() == 1) { // This guy is a constant with NO inputs?
- n->set_req(0, _root);
+ const Node* control_input = parent_node->in(0);
+ if (control_input != NULL) {
+ replace_block_proj_ctrl(parent_node);
+ } else {
+ // Is a constant with NO inputs?
+ if (parent_node->req() == 1) {
+ parent_node->set_req(0, _root);
}
}
}
@@ -239,37 +239,47 @@
// input is already in a block we quit following inputs (to avoid
// cycles). Instead we put that Node on a worklist to be handled
// later (since IT'S inputs may not have a block yet).
- bool done = true; // Assume all n's inputs will be processed
- while (i < n->len()) { // For all inputs
- Node *in = n->in(i); // Get input
- ++i;
- if (in == NULL) continue; // Ignore NULL, missing inputs
+
+ // Assume all n's inputs will be processed
+ bool done = true;
+
+ while (input_index < parent_node->len()) {
+ Node* in = parent_node->in(input_index++);
+ if (in == NULL) {
+ continue;
+ }
+
int is_visited = visited.test_set(in->_idx);
- if (!has_block(in)) { // Missing block selection?
+ if (!has_block(in)) {
if (is_visited) {
- // assert( !visited.test(in->_idx), "did not schedule early" );
return false;
}
- nstack.push(n, i); // Save parent node and next input's index.
- nstack_top_n = in; // Process current input now.
- nstack_top_i = 0;
- done = false; // Not all n's inputs processed.
- break; // continue while_nstack_nonempty;
- } else if (!is_visited) { // Input not yet visited?
- roots.push(in); // Visit this guy later, using worklist
+ // Save parent node and next input's index.
+ nstack.push(parent_node, input_index);
+ // Process current input now.
+ parent_node = in;
+ input_index = 0;
+ // Not all n's inputs processed.
+ done = false;
+ break;
+ } else if (!is_visited) {
+ // Visit this guy later, using worklist
+ roots.push(in);
}
}
+
if (done) {
// All of n's inputs have been processed, complete post-processing.
// Some instructions are pinned into a block. These include Region,
// Phi, Start, Return, and other control-dependent instructions and
// any projections which depend on them.
- if (!n->pinned()) {
+ if (!parent_node->pinned()) {
// Set earliest legal block.
- map_node_to_block(n, find_deepest_input(n, this));
+ Block* earliest_block = find_deepest_input(parent_node, this);
+ map_node_to_block(parent_node, earliest_block);
} else {
- assert(get_block_for_node(n) == get_block_for_node(n->in(0)), "Pinned Node should be at the same block as its control edge");
+ assert(get_block_for_node(parent_node) == get_block_for_node(parent_node->in(0)), "Pinned Node should be at the same block as its control edge");
}
if (nstack.is_empty()) {
@@ -278,12 +288,12 @@
break;
}
// Get saved parent node and next input's index.
- nstack_top_n = nstack.node();
- nstack_top_i = nstack.index();
+ parent_node = nstack.node();
+ input_index = nstack.index();
nstack.pop();
- } // if (done)
- } // while (true)
- } // while (roots.size() != 0)
+ }
+ }
+ }
return true;
}
@@ -847,7 +857,7 @@
//------------------------------ComputeLatenciesBackwards----------------------
// Compute the latency of all the instructions.
-void PhaseCFG::ComputeLatenciesBackwards(VectorSet &visited, Node_List &stack) {
+void PhaseCFG::compute_latencies_backwards(VectorSet &visited, Node_List &stack) {
#ifndef PRODUCT
if (trace_opto_pipelining())
tty->print("\n#---- ComputeLatenciesBackwards ----\n");
@@ -870,31 +880,34 @@
// Set the latency for this instruction
#ifndef PRODUCT
if (trace_opto_pipelining()) {
- tty->print("# latency_to_inputs: node_latency[%d] = %d for node",
- n->_idx, _node_latency->at_grow(n->_idx));
+ tty->print("# latency_to_inputs: node_latency[%d] = %d for node", n->_idx, get_latency_for_node(n));
dump();
}
#endif
- if (n->is_Proj())
+ if (n->is_Proj()) {
n = n->in(0);
+ }
- if (n->is_Root())
+ if (n->is_Root()) {
return;
+ }
uint nlen = n->len();
- uint use_latency = _node_latency->at_grow(n->_idx);
+ uint use_latency = get_latency_for_node(n);
uint use_pre_order = get_block_for_node(n)->_pre_order;
- for ( uint j=0; j<nlen; j++ ) {
+ for (uint j = 0; j < nlen; j++) {
Node *def = n->in(j);
- if (!def || def == n)
+ if (!def || def == n) {
continue;
+ }
// Walk backwards thru projections
- if (def->is_Proj())
+ if (def->is_Proj()) {
def = def->in(0);
+ }
#ifndef PRODUCT
if (trace_opto_pipelining()) {
@@ -907,22 +920,20 @@
Block *def_block = get_block_for_node(def);
uint def_pre_order = def_block ? def_block->_pre_order : 0;
- if ( (use_pre_order < def_pre_order) ||
- (use_pre_order == def_pre_order && n->is_Phi()) )
+ if ((use_pre_order < def_pre_order) || (use_pre_order == def_pre_order && n->is_Phi())) {
continue;
+ }
uint delta_latency = n->latency(j);
uint current_latency = delta_latency + use_latency;
- if (_node_latency->at_grow(def->_idx) < current_latency) {
- _node_latency->at_put_grow(def->_idx, current_latency);
+ if (get_latency_for_node(def) < current_latency) {
+ set_latency_for_node(def, current_latency);
}
#ifndef PRODUCT
if (trace_opto_pipelining()) {
- tty->print_cr("# %d + edge_latency(%d) == %d -> %d, node_latency[%d] = %d",
- use_latency, j, delta_latency, current_latency, def->_idx,
- _node_latency->at_grow(def->_idx));
+ tty->print_cr("# %d + edge_latency(%d) == %d -> %d, node_latency[%d] = %d", use_latency, j, delta_latency, current_latency, def->_idx, get_latency_for_node(def));
}
#endif
}
@@ -957,7 +968,7 @@
return 0;
uint nlen = use->len();
- uint nl = _node_latency->at_grow(use->_idx);
+ uint nl = get_latency_for_node(use);
for ( uint j=0; j<nlen; j++ ) {
if (use->in(j) == n) {
@@ -992,8 +1003,7 @@
// Set the latency for this instruction
#ifndef PRODUCT
if (trace_opto_pipelining()) {
- tty->print("# latency_from_outputs: node_latency[%d] = %d for node",
- n->_idx, _node_latency->at_grow(n->_idx));
+ tty->print("# latency_from_outputs: node_latency[%d] = %d for node", n->_idx, get_latency_for_node(n));
dump();
}
#endif
@@ -1006,7 +1016,7 @@
if (latency < l) latency = l;
}
- _node_latency->at_put_grow(n->_idx, latency);
+ set_latency_for_node(n, latency);
}
//------------------------------hoist_to_cheaper_block-------------------------
@@ -1016,9 +1026,9 @@
const double delta = 1+PROB_UNLIKELY_MAG(4);
Block* least = LCA;
double least_freq = least->_freq;
- uint target = _node_latency->at_grow(self->_idx);
- uint start_latency = _node_latency->at_grow(LCA->_nodes[0]->_idx);
- uint end_latency = _node_latency->at_grow(LCA->_nodes[LCA->end_idx()]->_idx);
+ uint target = get_latency_for_node(self);
+ uint start_latency = get_latency_for_node(LCA->_nodes[0]);
+ uint end_latency = get_latency_for_node(LCA->_nodes[LCA->end_idx()]);
bool in_latency = (target <= start_latency);
const Block* root_block = get_block_for_node(_root);
@@ -1035,8 +1045,7 @@
#ifndef PRODUCT
if (trace_opto_pipelining()) {
- tty->print("# Find cheaper block for latency %d: ",
- _node_latency->at_grow(self->_idx));
+ tty->print("# Find cheaper block for latency %d: ", get_latency_for_node(self));
self->dump();
tty->print_cr("# B%d: start latency for [%4d]=%d, end latency for [%4d]=%d, freq=%g",
LCA->_pre_order,
@@ -1065,9 +1074,9 @@
if (mach && LCA == root_block)
break;
- uint start_lat = _node_latency->at_grow(LCA->_nodes[0]->_idx);
+ uint start_lat = get_latency_for_node(LCA->_nodes[0]);
uint end_idx = LCA->end_idx();
- uint end_lat = _node_latency->at_grow(LCA->_nodes[end_idx]->_idx);
+ uint end_lat = get_latency_for_node(LCA->_nodes[end_idx]);
double LCA_freq = LCA->_freq;
#ifndef PRODUCT
if (trace_opto_pipelining()) {
@@ -1109,7 +1118,7 @@
tty->print_cr("# Change latency for [%4d] from %d to %d", self->_idx, target, end_latency);
}
#endif
- _node_latency->at_put_grow(self->_idx, end_latency);
+ set_latency_for_node(self, end_latency);
partial_latency_of_defs(self);
}
@@ -1255,7 +1264,7 @@
} // end ScheduleLate
//------------------------------GlobalCodeMotion-------------------------------
-void PhaseCFG::GlobalCodeMotion( Matcher &matcher, uint unique, Node_List &proj_list ) {
+void PhaseCFG::global_code_motion() {
ResourceMark rm;
#ifndef PRODUCT
@@ -1265,21 +1274,22 @@
#endif
// Initialize the node to block mapping for things on the proj_list
- for (uint i = 0; i < proj_list.size(); i++) {
- unmap_node_from_block(proj_list[i]);
+ for (uint i = 0; i < _matcher.number_of_projections(); i++) {
+ unmap_node_from_block(_matcher.get_projection(i));
}
// Set the basic block for Nodes pinned into blocks
- Arena *a = Thread::current()->resource_area();
- VectorSet visited(a);
- schedule_pinned_nodes( visited );
+ Arena* arena = Thread::current()->resource_area();
+ VectorSet visited(arena);
+ schedule_pinned_nodes(visited);
// Find the earliest Block any instruction can be placed in. Some
// instructions are pinned into Blocks. Unpinned instructions can
// appear in last block in which all their inputs occur.
visited.Clear();
- Node_List stack(a);
- stack.map( (unique >> 1) + 16, NULL); // Pre-grow the list
+ Node_List stack(arena);
+ // Pre-grow the list
+ stack.map((C->unique() >> 1) + 16, NULL);
if (!schedule_early(visited, stack)) {
// Bailout without retry
C->record_method_not_compilable("early schedule failed");
@@ -1287,29 +1297,25 @@
}
// Build Def-Use edges.
- proj_list.push(_root); // Add real root as another root
- proj_list.pop();
-
// Compute the latency information (via backwards walk) for all the
// instructions in the graph
_node_latency = new GrowableArray<uint>(); // resource_area allocation
- if( C->do_scheduling() )
- ComputeLatenciesBackwards(visited, stack);
+ if (C->do_scheduling()) {
+ compute_latencies_backwards(visited, stack);
+ }
// Now schedule all codes as LATE as possible. This is the LCA in the
// dominator tree of all USES of a value. Pick the block with the least
// loop nesting depth that is lowest in the dominator tree.
// ( visited.Clear() called in schedule_late()->Node_Backward_Iterator() )
schedule_late(visited, stack);
- if( C->failing() ) {
+ if (C->failing()) {
// schedule_late fails only when graph is incorrect.
assert(!VerifyGraphEdges, "verification should have failed");
return;
}
- unique = C->unique();
-
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print("\n---- Detect implicit null checks ----\n");
@@ -1332,10 +1338,11 @@
// By reversing the loop direction we get a very minor gain on mpegaudio.
// Feel free to revert to a forward loop for clarity.
// for( int i=0; i < (int)matcher._null_check_tests.size(); i+=2 ) {
- for( int i= matcher._null_check_tests.size()-2; i>=0; i-=2 ) {
- Node *proj = matcher._null_check_tests[i ];
- Node *val = matcher._null_check_tests[i+1];
- get_block_for_node(proj)->implicit_null_check(this, proj, val, allowed_reasons);
+ for (int i = _matcher._null_check_tests.size() - 2; i >= 0; i -= 2) {
+ Node* proj = _matcher._null_check_tests[i];
+ Node* val = _matcher._null_check_tests[i + 1];
+ Block* block = get_block_for_node(proj);
+ block->implicit_null_check(this, proj, val, allowed_reasons);
// The implicit_null_check will only perform the transformation
// if the null branch is truly uncommon, *and* it leads to an
// uncommon trap. Combined with the too_many_traps guards
@@ -1352,11 +1359,11 @@
// Schedule locally. Right now a simple topological sort.
// Later, do a real latency aware scheduler.
- uint max_idx = C->unique();
- GrowableArray<int> ready_cnt(max_idx, max_idx, -1);
+ GrowableArray<int> ready_cnt(C->unique(), C->unique(), -1);
visited.Clear();
- for (uint i = 0; i < _num_blocks; i++) {
- if (!_blocks[i]->schedule_local(this, matcher, ready_cnt, visited)) {
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ if (!block->schedule_local(this, _matcher, ready_cnt, visited)) {
if (!C->failure_reason_is(C2Compiler::retry_no_subsuming_loads())) {
C->record_method_not_compilable("local schedule failed");
}
@@ -1366,15 +1373,17 @@
// If we inserted any instructions between a Call and his CatchNode,
// clone the instructions on all paths below the Catch.
- for (uint i = 0; i < _num_blocks; i++) {
- _blocks[i]->call_catch_cleanup(this, C);
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ block->call_catch_cleanup(this, C);
}
#ifndef PRODUCT
if (trace_opto_pipelining()) {
tty->print("\n---- After GlobalCodeMotion ----\n");
- for (uint i = 0; i < _num_blocks; i++) {
- _blocks[i]->dump();
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ block->dump();
}
}
#endif
@@ -1382,10 +1391,29 @@
_node_latency = (GrowableArray<uint> *)0xdeadbeef;
}
+bool PhaseCFG::do_global_code_motion() {
+
+ build_dominator_tree();
+ if (C->failing()) {
+ return false;
+ }
+
+ NOT_PRODUCT( C->verify_graph_edges(); )
+
+ estimate_block_frequency();
+
+ global_code_motion();
+
+ if (C->failing()) {
+ return false;
+ }
+
+ return true;
+}
//------------------------------Estimate_Block_Frequency-----------------------
// Estimate block frequencies based on IfNode probabilities.
-void PhaseCFG::Estimate_Block_Frequency() {
+void PhaseCFG::estimate_block_frequency() {
// Force conditional branches leading to uncommon traps to be unlikely,
// not because we get to the uncommon_trap with less relative frequency,
@@ -1393,7 +1421,7 @@
// there once.
if (C->do_freq_based_layout()) {
Block_List worklist;
- Block* root_blk = _blocks[0];
+ Block* root_blk = get_block(0);
for (uint i = 1; i < root_blk->num_preds(); i++) {
Block *pb = get_block_for_node(root_blk->pred(i));
if (pb->has_uncommon_code()) {
@@ -1402,7 +1430,9 @@
}
while (worklist.size() > 0) {
Block* uct = worklist.pop();
- if (uct == _broot) continue;
+ if (uct == get_root_block()) {
+ continue;
+ }
for (uint i = 1; i < uct->num_preds(); i++) {
Block *pb = get_block_for_node(uct->pred(i));
if (pb->_num_succs == 1) {
@@ -1426,12 +1456,12 @@
_root_loop->scale_freq();
// Save outmost loop frequency for LRG frequency threshold
- _outer_loop_freq = _root_loop->outer_loop_freq();
+ _outer_loop_frequency = _root_loop->outer_loop_freq();
// force paths ending at uncommon traps to be infrequent
if (!C->do_freq_based_layout()) {
Block_List worklist;
- Block* root_blk = _blocks[0];
+ Block* root_blk = get_block(0);
for (uint i = 1; i < root_blk->num_preds(); i++) {
Block *pb = get_block_for_node(root_blk->pred(i));
if (pb->has_uncommon_code()) {
@@ -1451,8 +1481,8 @@
}
#ifdef ASSERT
- for (uint i = 0; i < _num_blocks; i++ ) {
- Block *b = _blocks[i];
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* b = get_block(i);
assert(b->_freq >= MIN_BLOCK_FREQUENCY, "Register Allocator requires meaningful block frequency");
}
#endif
@@ -1476,16 +1506,16 @@
CFGLoop* PhaseCFG::create_loop_tree() {
#ifdef ASSERT
- assert( _blocks[0] == _broot, "" );
- for (uint i = 0; i < _num_blocks; i++ ) {
- Block *b = _blocks[i];
+ assert(get_block(0) == get_root_block(), "first block should be root block");
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
// Check that _loop field are clear...we could clear them if not.
- assert(b->_loop == NULL, "clear _loop expected");
+ assert(block->_loop == NULL, "clear _loop expected");
// Sanity check that the RPO numbering is reflected in the _blocks array.
// It doesn't have to be for the loop tree to be built, but if it is not,
// then the blocks have been reordered since dom graph building...which
// may question the RPO numbering
- assert(b->_rpo == i, "unexpected reverse post order number");
+ assert(block->_rpo == i, "unexpected reverse post order number");
}
#endif
@@ -1495,11 +1525,11 @@
Block_List worklist;
// Assign blocks to loops
- for(uint i = _num_blocks - 1; i > 0; i-- ) { // skip Root block
- Block *b = _blocks[i];
+ for(uint i = number_of_blocks() - 1; i > 0; i-- ) { // skip Root block
+ Block* block = get_block(i);
- if (b->head()->is_Loop()) {
- Block* loop_head = b;
+ if (block->head()->is_Loop()) {
+ Block* loop_head = block;
assert(loop_head->num_preds() - 1 == 2, "loop must have 2 predecessors");
Node* tail_n = loop_head->pred(LoopNode::LoopBackControl);
Block* tail = get_block_for_node(tail_n);
@@ -1533,23 +1563,23 @@
// Create a member list for each loop consisting
// of both blocks and (immediate child) loops.
- for (uint i = 0; i < _num_blocks; i++) {
- Block *b = _blocks[i];
- CFGLoop* lp = b->_loop;
+ for (uint i = 0; i < number_of_blocks(); i++) {
+ Block* block = get_block(i);
+ CFGLoop* lp = block->_loop;
if (lp == NULL) {
// Not assigned to a loop. Add it to the method's pseudo loop.
- b->_loop = root_loop;
+ block->_loop = root_loop;
lp = root_loop;
}
- if (lp == root_loop || b != lp->head()) { // loop heads are already members
- lp->add_member(b);
+ if (lp == root_loop || block != lp->head()) { // loop heads are already members
+ lp->add_member(block);
}
if (lp != root_loop) {
if (lp->parent() == NULL) {
// Not a nested loop. Make it a child of the method's pseudo loop.
root_loop->add_nested_loop(lp);
}
- if (b == lp->head()) {
+ if (block == lp->head()) {
// Add nested loop to member list of parent loop.
lp->parent()->add_member(lp);
}
--- a/hotspot/src/share/vm/opto/idealGraphPrinter.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/idealGraphPrinter.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -416,7 +416,7 @@
if (C->cfg() != NULL) {
Block* block = C->cfg()->get_block_for_node(node);
if (block == NULL) {
- print_prop("block", C->cfg()->_blocks[0]->_pre_order);
+ print_prop("block", C->cfg()->get_block(0)->_pre_order);
} else {
print_prop("block", block->_pre_order);
}
@@ -637,10 +637,10 @@
if (C->cfg() != NULL) {
// once we have a CFG there are some nodes that aren't really
// reachable but are in the CFG so add them here.
- for (uint i = 0; i < C->cfg()->_blocks.size(); i++) {
- Block *b = C->cfg()->_blocks[i];
- for (uint s = 0; s < b->_nodes.size(); s++) {
- nodeStack.push(b->_nodes[s]);
+ for (uint i = 0; i < C->cfg()->number_of_blocks(); i++) {
+ Block* block = C->cfg()->get_block(i);
+ for (uint s = 0; s < block->_nodes.size(); s++) {
+ nodeStack.push(block->_nodes[s]);
}
}
}
@@ -698,24 +698,24 @@
tail(EDGES_ELEMENT);
if (C->cfg() != NULL) {
head(CONTROL_FLOW_ELEMENT);
- for (uint i = 0; i < C->cfg()->_blocks.size(); i++) {
- Block *b = C->cfg()->_blocks[i];
+ for (uint i = 0; i < C->cfg()->number_of_blocks(); i++) {
+ Block* block = C->cfg()->get_block(i);
begin_head(BLOCK_ELEMENT);
- print_attr(BLOCK_NAME_PROPERTY, b->_pre_order);
+ print_attr(BLOCK_NAME_PROPERTY, block->_pre_order);
end_head();
head(SUCCESSORS_ELEMENT);
- for (uint s = 0; s < b->_num_succs; s++) {
+ for (uint s = 0; s < block->_num_succs; s++) {
begin_elem(SUCCESSOR_ELEMENT);
- print_attr(BLOCK_NAME_PROPERTY, b->_succs[s]->_pre_order);
+ print_attr(BLOCK_NAME_PROPERTY, block->_succs[s]->_pre_order);
end_elem();
}
tail(SUCCESSORS_ELEMENT);
head(NODES_ELEMENT);
- for (uint s = 0; s < b->_nodes.size(); s++) {
+ for (uint s = 0; s < block->_nodes.size(); s++) {
begin_elem(NODE_ELEMENT);
- print_attr(NODE_ID_PROPERTY, get_node_id(b->_nodes[s]));
+ print_attr(NODE_ID_PROPERTY, get_node_id(block->_nodes[s]));
end_elem();
}
tail(NODES_ELEMENT);
--- a/hotspot/src/share/vm/opto/ifg.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/ifg.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -37,12 +37,9 @@
#include "opto/memnode.hpp"
#include "opto/opcodes.hpp"
-//=============================================================================
-//------------------------------IFG--------------------------------------------
PhaseIFG::PhaseIFG( Arena *arena ) : Phase(Interference_Graph), _arena(arena) {
}
-//------------------------------init-------------------------------------------
void PhaseIFG::init( uint maxlrg ) {
_maxlrg = maxlrg;
_yanked = new (_arena) VectorSet(_arena);
@@ -59,7 +56,6 @@
}
}
-//------------------------------add--------------------------------------------
// Add edge between vertices a & b. These are sorted (triangular matrix),
// then the smaller number is inserted in the larger numbered array.
int PhaseIFG::add_edge( uint a, uint b ) {
@@ -71,7 +67,6 @@
return _adjs[a].insert( b );
}
-//------------------------------add_vector-------------------------------------
// Add an edge between 'a' and everything in the vector.
void PhaseIFG::add_vector( uint a, IndexSet *vec ) {
// IFG is triangular, so do the inserts where 'a' < 'b'.
@@ -86,7 +81,6 @@
}
}
-//------------------------------test-------------------------------------------
// Is there an edge between a and b?
int PhaseIFG::test_edge( uint a, uint b ) const {
// Sort a and b, so that a is larger
@@ -95,7 +89,6 @@
return _adjs[a].member(b);
}
-//------------------------------SquareUp---------------------------------------
// Convert triangular matrix to square matrix
void PhaseIFG::SquareUp() {
assert( !_is_square, "only on triangular" );
@@ -111,7 +104,6 @@
_is_square = true;
}
-//------------------------------Compute_Effective_Degree-----------------------
// Compute effective degree in bulk
void PhaseIFG::Compute_Effective_Degree() {
assert( _is_square, "only on square" );
@@ -120,7 +112,6 @@
lrgs(i).set_degree(effective_degree(i));
}
-//------------------------------test_edge_sq-----------------------------------
int PhaseIFG::test_edge_sq( uint a, uint b ) const {
assert( _is_square, "only on square" );
// Swap, so that 'a' has the lesser count. Then binary search is on
@@ -130,7 +121,6 @@
return _adjs[a].member(b);
}
-//------------------------------Union------------------------------------------
// Union edges of B into A
void PhaseIFG::Union( uint a, uint b ) {
assert( _is_square, "only on square" );
@@ -146,7 +136,6 @@
}
}
-//------------------------------remove_node------------------------------------
// Yank a Node and all connected edges from the IFG. Return a
// list of neighbors (edges) yanked.
IndexSet *PhaseIFG::remove_node( uint a ) {
@@ -165,7 +154,6 @@
return neighbors(a);
}
-//------------------------------re_insert--------------------------------------
// Re-insert a yanked Node.
void PhaseIFG::re_insert( uint a ) {
assert( _is_square, "only on square" );
@@ -180,7 +168,6 @@
}
}
-//------------------------------compute_degree---------------------------------
// Compute the degree between 2 live ranges. If both live ranges are
// aligned-adjacent powers-of-2 then we use the MAX size. If either is
// mis-aligned (or for Fat-Projections, not-adjacent) then we have to
@@ -196,7 +183,6 @@
return tmp;
}
-//------------------------------effective_degree-------------------------------
// Compute effective degree for this live range. If both live ranges are
// aligned-adjacent powers-of-2 then we use the MAX size. If either is
// mis-aligned (or for Fat-Projections, not-adjacent) then we have to
@@ -221,7 +207,6 @@
#ifndef PRODUCT
-//------------------------------dump-------------------------------------------
void PhaseIFG::dump() const {
tty->print_cr("-- Interference Graph --%s--",
_is_square ? "square" : "triangular" );
@@ -260,7 +245,6 @@
tty->print("\n");
}
-//------------------------------stats------------------------------------------
void PhaseIFG::stats() const {
ResourceMark rm;
int *h_cnt = NEW_RESOURCE_ARRAY(int,_maxlrg*2);
@@ -276,7 +260,6 @@
tty->print_cr("");
}
-//------------------------------verify-----------------------------------------
void PhaseIFG::verify( const PhaseChaitin *pc ) const {
// IFG is square, sorted and no need for Find
for( uint i = 0; i < _maxlrg; i++ ) {
@@ -298,7 +281,6 @@
}
#endif
-//------------------------------interfere_with_live----------------------------
// Interfere this register with everything currently live. Use the RegMasks
// to trim the set of possible interferences. Return a count of register-only
// interferences as an estimate of register pressure.
@@ -315,7 +297,6 @@
_ifg->add_edge( r, l );
}
-//------------------------------build_ifg_virtual------------------------------
// Actually build the interference graph. Uses virtual registers only, no
// physical register masks. This allows me to be very aggressive when
// coalescing copies. Some of this aggressiveness will have to be undone
@@ -325,9 +306,9 @@
void PhaseChaitin::build_ifg_virtual( ) {
// For all blocks (in any order) do...
- for( uint i=0; i<_cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
- IndexSet *liveout = _live->live(b);
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
+ IndexSet* liveout = _live->live(block);
// The IFG is built by a single reverse pass over each basic block.
// Starting with the known live-out set, we remove things that get
@@ -337,8 +318,8 @@
// The defined value interferes with everything currently live. The
// value is then removed from the live-ness set and it's inputs are
// added to the live-ness set.
- for( uint j = b->end_idx() + 1; j > 1; j-- ) {
- Node *n = b->_nodes[j-1];
+ for (uint j = block->end_idx() + 1; j > 1; j--) {
+ Node* n = block->_nodes[j - 1];
// Get value being defined
uint r = _lrg_map.live_range_id(n);
@@ -408,7 +389,6 @@
} // End of forall blocks
}
-//------------------------------count_int_pressure-----------------------------
uint PhaseChaitin::count_int_pressure( IndexSet *liveout ) {
IndexSetIterator elements(liveout);
uint lidx;
@@ -424,7 +404,6 @@
return cnt;
}
-//------------------------------count_float_pressure---------------------------
uint PhaseChaitin::count_float_pressure( IndexSet *liveout ) {
IndexSetIterator elements(liveout);
uint lidx;
@@ -438,7 +417,6 @@
return cnt;
}
-//------------------------------lower_pressure---------------------------------
// Adjust register pressure down by 1. Capture last hi-to-low transition,
static void lower_pressure( LRG *lrg, uint where, Block *b, uint *pressure, uint *hrp_index ) {
if (lrg->mask().is_UP() && lrg->mask_size()) {
@@ -460,40 +438,41 @@
}
}
-//------------------------------build_ifg_physical-----------------------------
// Build the interference graph using physical registers when available.
// That is, if 2 live ranges are simultaneously alive but in their acceptable
// register sets do not overlap, then they do not interfere.
uint PhaseChaitin::build_ifg_physical( ResourceArea *a ) {
NOT_PRODUCT( Compile::TracePhase t3("buildIFG", &_t_buildIFGphysical, TimeCompiler); )
- uint spill_reg = LRG::SPILL_REG;
uint must_spill = 0;
// For all blocks (in any order) do...
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
// Clone (rather than smash in place) the liveout info, so it is alive
// for the "collect_gc_info" phase later.
- IndexSet liveout(_live->live(b));
- uint last_inst = b->end_idx();
+ IndexSet liveout(_live->live(block));
+ uint last_inst = block->end_idx();
// Compute first nonphi node index
uint first_inst;
- for( first_inst = 1; first_inst < last_inst; first_inst++ )
- if( !b->_nodes[first_inst]->is_Phi() )
+ for (first_inst = 1; first_inst < last_inst; first_inst++) {
+ if (!block->_nodes[first_inst]->is_Phi()) {
break;
+ }
+ }
// Spills could be inserted before CreateEx node which should be
// first instruction in block after Phis. Move CreateEx up.
- for( uint insidx = first_inst; insidx < last_inst; insidx++ ) {
- Node *ex = b->_nodes[insidx];
- if( ex->is_SpillCopy() ) continue;
- if( insidx > first_inst && ex->is_Mach() &&
- ex->as_Mach()->ideal_Opcode() == Op_CreateEx ) {
+ for (uint insidx = first_inst; insidx < last_inst; insidx++) {
+ Node *ex = block->_nodes[insidx];
+ if (ex->is_SpillCopy()) {
+ continue;
+ }
+ if (insidx > first_inst && ex->is_Mach() && ex->as_Mach()->ideal_Opcode() == Op_CreateEx) {
// If the CreateEx isn't above all the MachSpillCopies
// then move it to the top.
- b->_nodes.remove(insidx);
- b->_nodes.insert(first_inst, ex);
+ block->_nodes.remove(insidx);
+ block->_nodes.insert(first_inst, ex);
}
// Stop once a CreateEx or any other node is found
break;
@@ -503,12 +482,12 @@
uint pressure[2], hrp_index[2];
pressure[0] = pressure[1] = 0;
hrp_index[0] = hrp_index[1] = last_inst+1;
- b->_reg_pressure = b->_freg_pressure = 0;
+ block->_reg_pressure = block->_freg_pressure = 0;
// Liveout things are presumed live for the whole block. We accumulate
// 'area' accordingly. If they get killed in the block, we'll subtract
// the unused part of the block from the area.
int inst_count = last_inst - first_inst;
- double cost = (inst_count <= 0) ? 0.0 : b->_freq * double(inst_count);
+ double cost = (inst_count <= 0) ? 0.0 : block->_freq * double(inst_count);
assert(!(cost < 0.0), "negative spill cost" );
IndexSetIterator elements(&liveout);
uint lidx;
@@ -519,13 +498,15 @@
if (lrg.mask().is_UP() && lrg.mask_size()) {
if (lrg._is_float || lrg._is_vector) { // Count float pressure
pressure[1] += lrg.reg_pressure();
- if( pressure[1] > b->_freg_pressure )
- b->_freg_pressure = pressure[1];
+ if (pressure[1] > block->_freg_pressure) {
+ block->_freg_pressure = pressure[1];
+ }
// Count int pressure, but do not count the SP, flags
- } else if( lrgs(lidx).mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) ) {
+ } else if(lrgs(lidx).mask().overlap(*Matcher::idealreg2regmask[Op_RegI])) {
pressure[0] += lrg.reg_pressure();
- if( pressure[0] > b->_reg_pressure )
- b->_reg_pressure = pressure[0];
+ if (pressure[0] > block->_reg_pressure) {
+ block->_reg_pressure = pressure[0];
+ }
}
}
}
@@ -541,8 +522,8 @@
// value is then removed from the live-ness set and it's inputs are added
// to the live-ness set.
uint j;
- for( j = last_inst + 1; j > 1; j-- ) {
- Node *n = b->_nodes[j - 1];
+ for (j = last_inst + 1; j > 1; j--) {
+ Node* n = block->_nodes[j - 1];
// Get value being defined
uint r = _lrg_map.live_range_id(n);
@@ -551,7 +532,7 @@
if(r) {
// A DEF normally costs block frequency; rematerialized values are
// removed from the DEF sight, so LOWER costs here.
- lrgs(r)._cost += n->rematerialize() ? 0 : b->_freq;
+ lrgs(r)._cost += n->rematerialize() ? 0 : block->_freq;
// If it is not live, then this instruction is dead. Probably caused
// by spilling and rematerialization. Who cares why, yank this baby.
@@ -560,7 +541,7 @@
if( !n->is_Proj() ||
// Could also be a flags-projection of a dead ADD or such.
(_lrg_map.live_range_id(def) && !liveout.member(_lrg_map.live_range_id(def)))) {
- b->_nodes.remove(j - 1);
+ block->_nodes.remove(j - 1);
if (lrgs(r)._def == n) {
lrgs(r)._def = 0;
}
@@ -580,21 +561,21 @@
RegMask itmp = lrgs(r).mask();
itmp.AND(*Matcher::idealreg2regmask[Op_RegI]);
int iregs = itmp.Size();
- if( pressure[0]+iregs > b->_reg_pressure )
- b->_reg_pressure = pressure[0]+iregs;
- if( pressure[0] <= (uint)INTPRESSURE &&
- pressure[0]+iregs > (uint)INTPRESSURE ) {
- hrp_index[0] = j-1;
+ if (pressure[0]+iregs > block->_reg_pressure) {
+ block->_reg_pressure = pressure[0] + iregs;
+ }
+ if (pressure[0] <= (uint)INTPRESSURE && pressure[0] + iregs > (uint)INTPRESSURE) {
+ hrp_index[0] = j - 1;
}
// Count the float-only registers
RegMask ftmp = lrgs(r).mask();
ftmp.AND(*Matcher::idealreg2regmask[Op_RegD]);
int fregs = ftmp.Size();
- if( pressure[1]+fregs > b->_freg_pressure )
- b->_freg_pressure = pressure[1]+fregs;
- if( pressure[1] <= (uint)FLOATPRESSURE &&
- pressure[1]+fregs > (uint)FLOATPRESSURE ) {
- hrp_index[1] = j-1;
+ if (pressure[1] + fregs > block->_freg_pressure) {
+ block->_freg_pressure = pressure[1] + fregs;
+ }
+ if(pressure[1] <= (uint)FLOATPRESSURE && pressure[1]+fregs > (uint)FLOATPRESSURE) {
+ hrp_index[1] = j - 1;
}
}
@@ -607,7 +588,7 @@
if( n->is_SpillCopy()
&& lrgs(r).is_singledef() // MultiDef live range can still split
&& n->outcnt() == 1 // and use must be in this block
- && _cfg.get_block_for_node(n->unique_out()) == b ) {
+ && _cfg.get_block_for_node(n->unique_out()) == block) {
// All single-use MachSpillCopy(s) that immediately precede their
// use must color early. If a longer live range steals their
// color, the spill copy will split and may push another spill copy
@@ -617,14 +598,16 @@
//
Node *single_use = n->unique_out();
- assert( b->find_node(single_use) >= j, "Use must be later in block");
+ assert(block->find_node(single_use) >= j, "Use must be later in block");
// Use can be earlier in block if it is a Phi, but then I should be a MultiDef
// Find first non SpillCopy 'm' that follows the current instruction
// (j - 1) is index for current instruction 'n'
Node *m = n;
- for( uint i = j; i <= last_inst && m->is_SpillCopy(); ++i ) { m = b->_nodes[i]; }
- if( m == single_use ) {
+ for (uint i = j; i <= last_inst && m->is_SpillCopy(); ++i) {
+ m = block->_nodes[i];
+ }
+ if (m == single_use) {
lrgs(r)._area = 0.0;
}
}
@@ -633,7 +616,7 @@
if( liveout.remove(r) ) {
// Adjust register pressure.
// Capture last hi-to-lo pressure transition
- lower_pressure( &lrgs(r), j-1, b, pressure, hrp_index );
+ lower_pressure(&lrgs(r), j - 1, block, pressure, hrp_index);
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
}
@@ -646,7 +629,7 @@
if (liveout.remove(x)) {
lrgs(x)._area -= cost;
// Adjust register pressure.
- lower_pressure(&lrgs(x), j-1, b, pressure, hrp_index);
+ lower_pressure(&lrgs(x), j - 1, block, pressure, hrp_index);
assert( pressure[0] == count_int_pressure (&liveout), "" );
assert( pressure[1] == count_float_pressure(&liveout), "" );
}
@@ -718,7 +701,7 @@
// Area remaining in the block
inst_count--;
- cost = (inst_count <= 0) ? 0.0 : b->_freq * double(inst_count);
+ cost = (inst_count <= 0) ? 0.0 : block->_freq * double(inst_count);
// Make all inputs live
if( !n->is_Phi() ) { // Phi function uses come from prior block
@@ -743,7 +726,7 @@
if (k < debug_start) {
// A USE costs twice block frequency (once for the Load, once
// for a Load-delay). Rematerialized uses only cost once.
- lrg._cost += (def->rematerialize() ? b->_freq : (b->_freq + b->_freq));
+ lrg._cost += (def->rematerialize() ? block->_freq : (block->_freq + block->_freq));
}
// It is live now
if (liveout.insert(x)) {
@@ -753,12 +736,14 @@
if (lrg.mask().is_UP() && lrg.mask_size()) {
if (lrg._is_float || lrg._is_vector) {
pressure[1] += lrg.reg_pressure();
- if( pressure[1] > b->_freg_pressure )
- b->_freg_pressure = pressure[1];
+ if (pressure[1] > block->_freg_pressure) {
+ block->_freg_pressure = pressure[1];
+ }
} else if( lrg.mask().overlap(*Matcher::idealreg2regmask[Op_RegI]) ) {
pressure[0] += lrg.reg_pressure();
- if( pressure[0] > b->_reg_pressure )
- b->_reg_pressure = pressure[0];
+ if (pressure[0] > block->_reg_pressure) {
+ block->_reg_pressure = pressure[0];
+ }
}
}
assert( pressure[0] == count_int_pressure (&liveout), "" );
@@ -772,44 +757,47 @@
// If we run off the top of the block with high pressure and
// never see a hi-to-low pressure transition, just record that
// the whole block is high pressure.
- if( pressure[0] > (uint)INTPRESSURE ) {
+ if (pressure[0] > (uint)INTPRESSURE) {
hrp_index[0] = 0;
- if( pressure[0] > b->_reg_pressure )
- b->_reg_pressure = pressure[0];
+ if (pressure[0] > block->_reg_pressure) {
+ block->_reg_pressure = pressure[0];
+ }
}
- if( pressure[1] > (uint)FLOATPRESSURE ) {
+ if (pressure[1] > (uint)FLOATPRESSURE) {
hrp_index[1] = 0;
- if( pressure[1] > b->_freg_pressure )
- b->_freg_pressure = pressure[1];
+ if (pressure[1] > block->_freg_pressure) {
+ block->_freg_pressure = pressure[1];
+ }
}
// Compute high pressure indice; avoid landing in the middle of projnodes
j = hrp_index[0];
- if( j < b->_nodes.size() && j < b->end_idx()+1 ) {
- Node *cur = b->_nodes[j];
- while( cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch() ) {
+ if (j < block->_nodes.size() && j < block->end_idx() + 1) {
+ Node* cur = block->_nodes[j];
+ while (cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch()) {
j--;
- cur = b->_nodes[j];
+ cur = block->_nodes[j];
}
}
- b->_ihrp_index = j;
+ block->_ihrp_index = j;
j = hrp_index[1];
- if( j < b->_nodes.size() && j < b->end_idx()+1 ) {
- Node *cur = b->_nodes[j];
- while( cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch() ) {
+ if (j < block->_nodes.size() && j < block->end_idx() + 1) {
+ Node* cur = block->_nodes[j];
+ while (cur->is_Proj() || (cur->is_MachNullCheck()) || cur->is_Catch()) {
j--;
- cur = b->_nodes[j];
+ cur = block->_nodes[j];
}
}
- b->_fhrp_index = j;
+ block->_fhrp_index = j;
#ifndef PRODUCT
// Gather Register Pressure Statistics
if( PrintOptoStatistics ) {
- if( b->_reg_pressure > (uint)INTPRESSURE || b->_freg_pressure > (uint)FLOATPRESSURE )
+ if (block->_reg_pressure > (uint)INTPRESSURE || block->_freg_pressure > (uint)FLOATPRESSURE) {
_high_pressure++;
- else
+ } else {
_low_pressure++;
+ }
}
#endif
} // End of for all blocks
--- a/hotspot/src/share/vm/opto/lcm.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/lcm.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -501,7 +501,7 @@
n_choice = 1;
}
- uint n_latency = cfg->_node_latency->at_grow(n->_idx);
+ uint n_latency = cfg->get_latency_for_node(n);
uint n_score = n->req(); // Many inputs get high score to break ties
// Keep best latency found
@@ -797,7 +797,7 @@
Node *n = _nodes[j];
int idx = n->_idx;
tty->print("# ready cnt:%3d ", ready_cnt.at(idx));
- tty->print("latency:%3d ", cfg->_node_latency->at_grow(idx));
+ tty->print("latency:%3d ", cfg->get_latency_for_node(n));
tty->print("%4d: %s\n", idx, n->Name());
}
}
@@ -825,7 +825,7 @@
#ifndef PRODUCT
if (cfg->trace_opto_pipelining()) {
tty->print("# select %d: %s", n->_idx, n->Name());
- tty->print(", latency:%d", cfg->_node_latency->at_grow(n->_idx));
+ tty->print(", latency:%d", cfg->get_latency_for_node(n));
n->dump();
if (Verbose) {
tty->print("# ready list:");
--- a/hotspot/src/share/vm/opto/live.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/live.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -30,9 +30,6 @@
#include "opto/machnode.hpp"
-
-//=============================================================================
-//------------------------------PhaseLive--------------------------------------
// Compute live-in/live-out. We use a totally incremental algorithm. The LIVE
// problem is monotonic. The steady-state solution looks like this: pull a
// block from the worklist. It has a set of delta's - values which are newly
@@ -53,9 +50,9 @@
// Init the sparse live arrays. This data is live on exit from here!
// The _live info is the live-out info.
- _live = (IndexSet*)_arena->Amalloc(sizeof(IndexSet)*_cfg._num_blocks);
+ _live = (IndexSet*)_arena->Amalloc(sizeof(IndexSet) * _cfg.number_of_blocks());
uint i;
- for( i=0; i<_cfg._num_blocks; i++ ) {
+ for (i = 0; i < _cfg.number_of_blocks(); i++) {
_live[i].initialize(_maxlrg);
}
@@ -65,14 +62,14 @@
// Does the memory used by _defs and _deltas get reclaimed? Does it matter? TT
// Array of values defined locally in blocks
- _defs = NEW_RESOURCE_ARRAY(IndexSet,_cfg._num_blocks);
- for( i=0; i<_cfg._num_blocks; i++ ) {
+ _defs = NEW_RESOURCE_ARRAY(IndexSet,_cfg.number_of_blocks());
+ for (i = 0; i < _cfg.number_of_blocks(); i++) {
_defs[i].initialize(_maxlrg);
}
// Array of delta-set pointers, indexed by block pre_order-1.
- _deltas = NEW_RESOURCE_ARRAY(IndexSet*,_cfg._num_blocks);
- memset( _deltas, 0, sizeof(IndexSet*)* _cfg._num_blocks);
+ _deltas = NEW_RESOURCE_ARRAY(IndexSet*,_cfg.number_of_blocks());
+ memset( _deltas, 0, sizeof(IndexSet*)* _cfg.number_of_blocks());
_free_IndexSet = NULL;
@@ -80,31 +77,32 @@
VectorSet first_pass(Thread::current()->resource_area());
// Outer loop: must compute local live-in sets and push into predecessors.
- uint iters = _cfg._num_blocks; // stat counters
- for( uint j=_cfg._num_blocks; j>0; j-- ) {
- Block *b = _cfg._blocks[j-1];
+ for (uint j = _cfg.number_of_blocks(); j > 0; j--) {
+ Block* block = _cfg.get_block(j - 1);
// Compute the local live-in set. Start with any new live-out bits.
- IndexSet *use = getset( b );
- IndexSet *def = &_defs[b->_pre_order-1];
+ IndexSet* use = getset(block);
+ IndexSet* def = &_defs[block->_pre_order-1];
DEBUG_ONLY(IndexSet *def_outside = getfreeset();)
uint i;
- for( i=b->_nodes.size(); i>1; i-- ) {
- Node *n = b->_nodes[i-1];
- if( n->is_Phi() ) break;
+ for (i = block->_nodes.size(); i > 1; i--) {
+ Node* n = block->_nodes[i-1];
+ if (n->is_Phi()) {
+ break;
+ }
uint r = _names[n->_idx];
assert(!def_outside->member(r), "Use of external LRG overlaps the same LRG defined in this block");
def->insert( r );
use->remove( r );
uint cnt = n->req();
- for( uint k=1; k<cnt; k++ ) {
+ for (uint k = 1; k < cnt; k++) {
Node *nk = n->in(k);
uint nkidx = nk->_idx;
- if (_cfg.get_block_for_node(nk) != b) {
+ if (_cfg.get_block_for_node(nk) != block) {
uint u = _names[nkidx];
- use->insert( u );
- DEBUG_ONLY(def_outside->insert( u );)
+ use->insert(u);
+ DEBUG_ONLY(def_outside->insert(u);)
}
}
}
@@ -113,41 +111,38 @@
_free_IndexSet = def_outside; // Drop onto free list
#endif
// Remove anything defined by Phis and the block start instruction
- for( uint k=i; k>0; k-- ) {
- uint r = _names[b->_nodes[k-1]->_idx];
- def->insert( r );
- use->remove( r );
+ for (uint k = i; k > 0; k--) {
+ uint r = _names[block->_nodes[k - 1]->_idx];
+ def->insert(r);
+ use->remove(r);
}
// Push these live-in things to predecessors
- for( uint l=1; l<b->num_preds(); l++ ) {
- Block *p = _cfg.get_block_for_node(b->pred(l));
- add_liveout( p, use, first_pass );
+ for (uint l = 1; l < block->num_preds(); l++) {
+ Block* p = _cfg.get_block_for_node(block->pred(l));
+ add_liveout(p, use, first_pass);
// PhiNode uses go in the live-out set of prior blocks.
- for( uint k=i; k>0; k-- )
- add_liveout( p, _names[b->_nodes[k-1]->in(l)->_idx], first_pass );
+ for (uint k = i; k > 0; k--) {
+ add_liveout(p, _names[block->_nodes[k-1]->in(l)->_idx], first_pass);
+ }
}
- freeset( b );
- first_pass.set(b->_pre_order);
+ freeset(block);
+ first_pass.set(block->_pre_order);
// Inner loop: blocks that picked up new live-out values to be propagated
- while( _worklist->size() ) {
- // !!!!!
-// #ifdef ASSERT
- iters++;
-// #endif
- Block *b = _worklist->pop();
- IndexSet *delta = getset(b);
+ while (_worklist->size()) {
+ Block* block = _worklist->pop();
+ IndexSet *delta = getset(block);
assert( delta->count(), "missing delta set" );
// Add new-live-in to predecessors live-out sets
- for (uint l = 1; l < b->num_preds(); l++) {
- Block* block = _cfg.get_block_for_node(b->pred(l));
- add_liveout(block, delta, first_pass);
+ for (uint l = 1; l < block->num_preds(); l++) {
+ Block* predecessor = _cfg.get_block_for_node(block->pred(l));
+ add_liveout(predecessor, delta, first_pass);
}
- freeset(b);
+ freeset(block);
} // End of while-worklist-not-empty
} // End of for-all-blocks-outer-loop
@@ -155,7 +150,7 @@
// We explicitly clear all of the IndexSets which we are about to release.
// This allows us to recycle their internal memory into IndexSet's free list.
- for( i=0; i<_cfg._num_blocks; i++ ) {
+ for (i = 0; i < _cfg.number_of_blocks(); i++) {
_defs[i].clear();
if (_deltas[i]) {
// Is this always true?
@@ -171,13 +166,11 @@
}
-//------------------------------stats------------------------------------------
#ifndef PRODUCT
void PhaseLive::stats(uint iters) const {
}
#endif
-//------------------------------getset-----------------------------------------
// Get an IndexSet for a block. Return existing one, if any. Make a new
// empty one if a prior one does not exist.
IndexSet *PhaseLive::getset( Block *p ) {
@@ -188,7 +181,6 @@
return delta; // Return set of new live-out items
}
-//------------------------------getfreeset-------------------------------------
// Pull from free list, or allocate. Internal allocation on the returned set
// is always from thread local storage.
IndexSet *PhaseLive::getfreeset( ) {
@@ -207,7 +199,6 @@
return f;
}
-//------------------------------freeset----------------------------------------
// Free an IndexSet from a block.
void PhaseLive::freeset( const Block *p ) {
IndexSet *f = _deltas[p->_pre_order-1];
@@ -216,7 +207,6 @@
_deltas[p->_pre_order-1] = NULL;
}
-//------------------------------add_liveout------------------------------------
// Add a live-out value to a given blocks live-out set. If it is new, then
// also add it to the delta set and stick the block on the worklist.
void PhaseLive::add_liveout( Block *p, uint r, VectorSet &first_pass ) {
@@ -233,8 +223,6 @@
}
}
-
-//------------------------------add_liveout------------------------------------
// Add a vector of live-out values to a given blocks live-out set.
void PhaseLive::add_liveout( Block *p, IndexSet *lo, VectorSet &first_pass ) {
IndexSet *live = &_live[p->_pre_order-1];
@@ -262,7 +250,6 @@
}
#ifndef PRODUCT
-//------------------------------dump-------------------------------------------
// Dump the live-out set for a block
void PhaseLive::dump( const Block *b ) const {
tty->print("Block %d: ",b->_pre_order);
@@ -275,18 +262,19 @@
tty->print("\n");
}
-//------------------------------verify_base_ptrs-------------------------------
// Verify that base pointers and derived pointers are still sane.
void PhaseChaitin::verify_base_ptrs( ResourceArea *a ) const {
#ifdef ASSERT
Unique_Node_List worklist(a);
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
- Block *b = _cfg._blocks[i];
- for( uint j = b->end_idx() + 1; j > 1; j-- ) {
- Node *n = b->_nodes[j-1];
- if( n->is_Phi() ) break;
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
+ Block* block = _cfg.get_block(i);
+ for (uint j = block->end_idx() + 1; j > 1; j--) {
+ Node* n = block->_nodes[j-1];
+ if (n->is_Phi()) {
+ break;
+ }
// Found a safepoint?
- if( n->is_MachSafePoint() ) {
+ if (n->is_MachSafePoint()) {
MachSafePointNode *sfpt = n->as_MachSafePoint();
JVMState* jvms = sfpt->jvms();
if (jvms != NULL) {
@@ -358,7 +346,6 @@
#endif
}
-//------------------------------verify-------------------------------------
// Verify that graphs and base pointers are still sane.
void PhaseChaitin::verify( ResourceArea *a, bool verify_ifg ) const {
#ifdef ASSERT
--- a/hotspot/src/share/vm/opto/matcher.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/matcher.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -67,8 +67,8 @@
const uint Matcher::_end_rematerialize = _END_REMATERIALIZE;
//---------------------------Matcher-------------------------------------------
-Matcher::Matcher( Node_List &proj_list ) :
- PhaseTransform( Phase::Ins_Select ),
+Matcher::Matcher()
+: PhaseTransform( Phase::Ins_Select ),
#ifdef ASSERT
_old2new_map(C->comp_arena()),
_new2old_map(C->comp_arena()),
@@ -78,7 +78,7 @@
_swallowed(swallowed),
_begin_inst_chain_rule(_BEGIN_INST_CHAIN_RULE),
_end_inst_chain_rule(_END_INST_CHAIN_RULE),
- _must_clone(must_clone), _proj_list(proj_list),
+ _must_clone(must_clone),
_register_save_policy(register_save_policy),
_c_reg_save_policy(c_reg_save_policy),
_register_save_type(register_save_type),
@@ -1304,8 +1304,9 @@
for (int i = begin_out_arg_area; i < out_arg_limit_per_call; i++)
proj->_rout.Insert(OptoReg::Name(i));
}
- if( proj->_rout.is_NotEmpty() )
- _proj_list.push(proj);
+ if (proj->_rout.is_NotEmpty()) {
+ push_projection(proj);
+ }
}
// Transfer the safepoint information from the call to the mcall
// Move the JVMState list
@@ -1685,14 +1686,15 @@
}
// If the _leaf is an AddP, insert the base edge
- if( leaf->is_AddP() )
+ if (leaf->is_AddP()) {
mach->ins_req(AddPNode::Base,leaf->in(AddPNode::Base));
+ }
- uint num_proj = _proj_list.size();
+ uint number_of_projections_prior = number_of_projections();
// Perform any 1-to-many expansions required
- MachNode *ex = mach->Expand(s,_proj_list, mem);
- if( ex != mach ) {
+ MachNode *ex = mach->Expand(s, _projection_list, mem);
+ if (ex != mach) {
assert(ex->ideal_reg() == mach->ideal_reg(), "ideal types should match");
if( ex->in(1)->is_Con() )
ex->in(1)->set_req(0, C->root());
@@ -1713,7 +1715,7 @@
// generated belatedly during spill code generation.
if (_allocation_started) {
guarantee(ex == mach, "no expand rules during spill generation");
- guarantee(_proj_list.size() == num_proj, "no allocation during spill generation");
+ guarantee(number_of_projections_prior == number_of_projections(), "no allocation during spill generation");
}
if (leaf->is_Con() || leaf->is_DecodeNarrowPtr()) {
--- a/hotspot/src/share/vm/opto/matcher.hpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/matcher.hpp Mon Aug 19 09:33:29 2013 +0200
@@ -88,7 +88,7 @@
Node *transform( Node *dummy );
- Node_List &_proj_list; // For Machine nodes killing many values
+ Node_List _projection_list; // For Machine nodes killing many values
Node_Array _shared_nodes;
@@ -183,10 +183,30 @@
void collect_null_checks( Node *proj, Node *orig_proj );
void validate_null_checks( );
- Matcher( Node_List &proj_list );
+ Matcher();
+
+ // Get a projection node at position pos
+ Node* get_projection(uint pos) {
+ return _projection_list[pos];
+ }
+
+ // Push a projection node onto the projection list
+ void push_projection(Node* node) {
+ _projection_list.push(node);
+ }
+
+ Node* pop_projection() {
+ return _projection_list.pop();
+ }
+
+ // Number of nodes in the projection list
+ uint number_of_projections() const {
+ return _projection_list.size();
+ }
// Select instructions for entire method
- void match( );
+ void match();
+
// Helper for match
OptoReg::Name warp_incoming_stk_arg( VMReg reg );
--- a/hotspot/src/share/vm/opto/output.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/output.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -54,11 +54,10 @@
extern int emit_exception_handler(CodeBuffer &cbuf);
extern int emit_deopt_handler(CodeBuffer &cbuf);
-//------------------------------Output-----------------------------------------
// Convert Nodes to instruction bits and pass off to the VM
void Compile::Output() {
// RootNode goes
- assert( _cfg->_broot->_nodes.size() == 0, "" );
+ assert( _cfg->get_root_block()->_nodes.size() == 0, "" );
// The number of new nodes (mostly MachNop) is proportional to
// the number of java calls and inner loops which are aligned.
@@ -68,8 +67,8 @@
return;
}
// Make sure I can find the Start Node
- Block *entry = _cfg->_blocks[1];
- Block *broot = _cfg->_broot;
+ Block *entry = _cfg->get_block(1);
+ Block *broot = _cfg->get_root_block();
const StartNode *start = entry->_nodes[0]->as_Start();
@@ -109,40 +108,44 @@
}
// Insert epilogs before every return
- for( uint i=0; i<_cfg->_num_blocks; i++ ) {
- Block *b = _cfg->_blocks[i];
- if( !b->is_connector() && b->non_connector_successor(0) == _cfg->_broot ) { // Found a program exit point?
- Node *m = b->end();
- if( m->is_Mach() && m->as_Mach()->ideal_Opcode() != Op_Halt ) {
- MachEpilogNode *epilog = new (this) MachEpilogNode(m->as_Mach()->ideal_Opcode() == Op_Return);
- b->add_inst( epilog );
- _cfg->map_node_to_block(epilog, b);
+ for (uint i = 0; i < _cfg->number_of_blocks(); i++) {
+ Block* block = _cfg->get_block(i);
+ if (!block->is_connector() && block->non_connector_successor(0) == _cfg->get_root_block()) { // Found a program exit point?
+ Node* m = block->end();
+ if (m->is_Mach() && m->as_Mach()->ideal_Opcode() != Op_Halt) {
+ MachEpilogNode* epilog = new (this) MachEpilogNode(m->as_Mach()->ideal_Opcode() == Op_Return);
+ block->add_inst(epilog);
+ _cfg->map_node_to_block(epilog, block);
}
}
}
# ifdef ENABLE_ZAP_DEAD_LOCALS
- if ( ZapDeadCompiledLocals ) Insert_zap_nodes();
+ if (ZapDeadCompiledLocals) {
+ Insert_zap_nodes();
+ }
# endif
- uint* blk_starts = NEW_RESOURCE_ARRAY(uint,_cfg->_num_blocks+1);
- blk_starts[0] = 0;
+ uint* blk_starts = NEW_RESOURCE_ARRAY(uint, _cfg->number_of_blocks() + 1);
+ blk_starts[0] = 0;
// Initialize code buffer and process short branches.
CodeBuffer* cb = init_buffer(blk_starts);
- if (cb == NULL || failing()) return;
+ if (cb == NULL || failing()) {
+ return;
+ }
ScheduleAndBundle();
#ifndef PRODUCT
if (trace_opto_output()) {
tty->print("\n---- After ScheduleAndBundle ----\n");
- for (uint i = 0; i < _cfg->_num_blocks; i++) {
+ for (uint i = 0; i < _cfg->number_of_blocks(); i++) {
tty->print("\nBB#%03d:\n", i);
- Block *bb = _cfg->_blocks[i];
- for (uint j = 0; j < bb->_nodes.size(); j++) {
- Node *n = bb->_nodes[j];
+ Block* block = _cfg->get_block(i);
+ for (uint j = 0; j < block->_nodes.size(); j++) {
+ Node* n = block->_nodes[j];
OptoReg::Name reg = _regalloc->get_reg_first(n);
tty->print(" %-6s ", reg >= 0 && reg < REG_COUNT ? Matcher::regName[reg] : "");
n->dump();
@@ -151,11 +154,15 @@
}
#endif
- if (failing()) return;
+ if (failing()) {
+ return;
+ }
BuildOopMaps();
- if (failing()) return;
+ if (failing()) {
+ return;
+ }
fill_buffer(cb, blk_starts);
}
@@ -217,8 +224,8 @@
return; // no safepoints/oopmaps emitted for calls in stubs,so we don't care
// Insert call to zap runtime stub before every node with an oop map
- for( uint i=0; i<_cfg->_num_blocks; i++ ) {
- Block *b = _cfg->_blocks[i];
+ for( uint i=0; i<_cfg->number_of_blocks(); i++ ) {
+ Block *b = _cfg->get_block(i);
for ( uint j = 0; j < b->_nodes.size(); ++j ) {
Node *n = b->_nodes[j];
@@ -275,7 +282,6 @@
return _matcher->match_sfpt(ideal_node);
}
-//------------------------------is_node_getting_a_safepoint--------------------
bool Compile::is_node_getting_a_safepoint( Node* n) {
// This code duplicates the logic prior to the call of add_safepoint
// below in this file.
@@ -285,7 +291,6 @@
# endif // ENABLE_ZAP_DEAD_LOCALS
-//------------------------------compute_loop_first_inst_sizes------------------
// Compute the size of first NumberOfLoopInstrToAlign instructions at the top
// of a loop. When aligning a loop we need to provide enough instructions
// in cpu's fetch buffer to feed decoders. The loop alignment could be
@@ -302,42 +307,39 @@
// or alignment padding is larger then MaxLoopPad. By default, MaxLoopPad
// is equal to OptoLoopAlignment-1 except on new Intel cpus, where it is
// equal to 11 bytes which is the largest address NOP instruction.
- if( MaxLoopPad < OptoLoopAlignment-1 ) {
- uint last_block = _cfg->_num_blocks-1;
- for( uint i=1; i <= last_block; i++ ) {
- Block *b = _cfg->_blocks[i];
+ if (MaxLoopPad < OptoLoopAlignment - 1) {
+ uint last_block = _cfg->number_of_blocks() - 1;
+ for (uint i = 1; i <= last_block; i++) {
+ Block* block = _cfg->get_block(i);
// Check the first loop's block which requires an alignment.
- if( b->loop_alignment() > (uint)relocInfo::addr_unit() ) {
+ if (block->loop_alignment() > (uint)relocInfo::addr_unit()) {
uint sum_size = 0;
uint inst_cnt = NumberOfLoopInstrToAlign;
- inst_cnt = b->compute_first_inst_size(sum_size, inst_cnt, _regalloc);
+ inst_cnt = block->compute_first_inst_size(sum_size, inst_cnt, _regalloc);
// Check subsequent fallthrough blocks if the loop's first
// block(s) does not have enough instructions.
- Block *nb = b;
- while( inst_cnt > 0 &&
- i < last_block &&
- !_cfg->_blocks[i+1]->has_loop_alignment() &&
- !nb->has_successor(b) ) {
+ Block *nb = block;
+ while(inst_cnt > 0 &&
+ i < last_block &&
+ !_cfg->get_block(i + 1)->has_loop_alignment() &&
+ !nb->has_successor(block)) {
i++;
- nb = _cfg->_blocks[i];
+ nb = _cfg->get_block(i);
inst_cnt = nb->compute_first_inst_size(sum_size, inst_cnt, _regalloc);
} // while( inst_cnt > 0 && i < last_block )
- b->set_first_inst_size(sum_size);
+ block->set_first_inst_size(sum_size);
} // f( b->head()->is_Loop() )
} // for( i <= last_block )
} // if( MaxLoopPad < OptoLoopAlignment-1 )
}
-//----------------------shorten_branches---------------------------------------
// The architecture description provides short branch variants for some long
// branch instructions. Replace eligible long branches with short branches.
void Compile::shorten_branches(uint* blk_starts, int& code_size, int& reloc_size, int& stub_size) {
-
- // ------------------
// Compute size of each block, method size, and relocation information size
- uint nblocks = _cfg->_num_blocks;
+ uint nblocks = _cfg->number_of_blocks();
uint* jmp_offset = NEW_RESOURCE_ARRAY(uint,nblocks);
uint* jmp_size = NEW_RESOURCE_ARRAY(uint,nblocks);
@@ -364,7 +366,7 @@
uint last_avoid_back_to_back_adr = max_uint;
uint nop_size = (new (this) MachNopNode())->size(_regalloc);
for (uint i = 0; i < nblocks; i++) { // For all blocks
- Block *b = _cfg->_blocks[i];
+ Block* block = _cfg->get_block(i);
// During short branch replacement, we store the relative (to blk_starts)
// offset of jump in jmp_offset, rather than the absolute offset of jump.
@@ -377,10 +379,10 @@
DEBUG_ONLY( jmp_rule[i] = 0; )
// Sum all instruction sizes to compute block size
- uint last_inst = b->_nodes.size();
+ uint last_inst = block->_nodes.size();
uint blk_size = 0;
for (uint j = 0; j < last_inst; j++) {
- Node* nj = b->_nodes[j];
+ Node* nj = block->_nodes[j];
// Handle machine instruction nodes
if (nj->is_Mach()) {
MachNode *mach = nj->as_Mach();
@@ -441,8 +443,8 @@
// When the next block starts a loop, we may insert pad NOP
// instructions. Since we cannot know our future alignment,
// assume the worst.
- if (i< nblocks-1) {
- Block *nb = _cfg->_blocks[i+1];
+ if (i < nblocks - 1) {
+ Block* nb = _cfg->get_block(i + 1);
int max_loop_pad = nb->code_alignment()-relocInfo::addr_unit();
if (max_loop_pad > 0) {
assert(is_power_of_2(max_loop_pad+relocInfo::addr_unit()), "");
@@ -473,26 +475,26 @@
has_short_branch_candidate = false;
int adjust_block_start = 0;
for (uint i = 0; i < nblocks; i++) {
- Block *b = _cfg->_blocks[i];
+ Block* block = _cfg->get_block(i);
int idx = jmp_nidx[i];
- MachNode* mach = (idx == -1) ? NULL: b->_nodes[idx]->as_Mach();
+ MachNode* mach = (idx == -1) ? NULL: block->_nodes[idx]->as_Mach();
if (mach != NULL && mach->may_be_short_branch()) {
#ifdef ASSERT
assert(jmp_size[i] > 0 && mach->is_MachBranch(), "sanity");
int j;
// Find the branch; ignore trailing NOPs.
- for (j = b->_nodes.size()-1; j>=0; j--) {
- Node* n = b->_nodes[j];
+ for (j = block->_nodes.size()-1; j>=0; j--) {
+ Node* n = block->_nodes[j];
if (!n->is_Mach() || n->as_Mach()->ideal_Opcode() != Op_Con)
break;
}
- assert(j >= 0 && j == idx && b->_nodes[j] == (Node*)mach, "sanity");
+ assert(j >= 0 && j == idx && block->_nodes[j] == (Node*)mach, "sanity");
#endif
int br_size = jmp_size[i];
int br_offs = blk_starts[i] + jmp_offset[i];
// This requires the TRUE branch target be in succs[0]
- uint bnum = b->non_connector_successor(0)->_pre_order;
+ uint bnum = block->non_connector_successor(0)->_pre_order;
int offset = blk_starts[bnum] - br_offs;
if (bnum > i) { // adjust following block's offset
offset -= adjust_block_start;
@@ -520,7 +522,7 @@
diff -= nop_size;
}
adjust_block_start += diff;
- b->_nodes.map(idx, replacement);
+ block->_nodes.map(idx, replacement);
mach->subsume_by(replacement, C);
mach = replacement;
progress = true;
@@ -1083,8 +1085,8 @@
if (has_mach_constant_base_node()) {
// Fill the constant table.
// Note: This must happen before shorten_branches.
- for (uint i = 0; i < _cfg->_num_blocks; i++) {
- Block* b = _cfg->_blocks[i];
+ for (uint i = 0; i < _cfg->number_of_blocks(); i++) {
+ Block* b = _cfg->get_block(i);
for (uint j = 0; j < b->_nodes.size(); j++) {
Node* n = b->_nodes[j];
@@ -1170,7 +1172,7 @@
// !!!!! This preserves old handling of oopmaps for now
debug_info()->set_oopmaps(_oop_map_set);
- uint nblocks = _cfg->_num_blocks;
+ uint nblocks = _cfg->number_of_blocks();
// Count and start of implicit null check instructions
uint inct_cnt = 0;
uint *inct_starts = NEW_RESOURCE_ARRAY(uint, nblocks+1);
@@ -1218,21 +1220,21 @@
// Now fill in the code buffer
Node *delay_slot = NULL;
- for (uint i=0; i < nblocks; i++) {
- Block *b = _cfg->_blocks[i];
-
- Node *head = b->head();
+ for (uint i = 0; i < nblocks; i++) {
+ Block* block = _cfg->get_block(i);
+ Node* head = block->head();
// If this block needs to start aligned (i.e, can be reached other
// than by falling-thru from the previous block), then force the
// start of a new bundle.
- if (Pipeline::requires_bundling() && starts_bundle(head))
+ if (Pipeline::requires_bundling() && starts_bundle(head)) {
cb->flush_bundle(true);
+ }
#ifdef ASSERT
- if (!b->is_connector()) {
+ if (!block->is_connector()) {
stringStream st;
- b->dump_head(_cfg, &st);
+ block->dump_head(_cfg, &st);
MacroAssembler(cb).block_comment(st.as_string());
}
jmp_target[i] = 0;
@@ -1243,16 +1245,16 @@
int blk_offset = current_offset;
// Define the label at the beginning of the basic block
- MacroAssembler(cb).bind(blk_labels[b->_pre_order]);
-
- uint last_inst = b->_nodes.size();
+ MacroAssembler(cb).bind(blk_labels[block->_pre_order]);
+
+ uint last_inst = block->_nodes.size();
// Emit block normally, except for last instruction.
// Emit means "dump code bits into code buffer".
for (uint j = 0; j<last_inst; j++) {
// Get the node
- Node* n = b->_nodes[j];
+ Node* n = block->_nodes[j];
// See if delay slots are supported
if (valid_bundle_info(n) &&
@@ -1306,9 +1308,9 @@
assert((padding % nop_size) == 0, "padding is not a multiple of NOP size");
int nops_cnt = padding / nop_size;
MachNode *nop = new (this) MachNopNode(nops_cnt);
- b->_nodes.insert(j++, nop);
+ block->_nodes.insert(j++, nop);
last_inst++;
- _cfg->map_node_to_block(nop, b);
+ _cfg->map_node_to_block(nop, block);
nop->emit(*cb, _regalloc);
cb->flush_bundle(true);
current_offset = cb->insts_size();
@@ -1322,7 +1324,7 @@
mcall->method_set((intptr_t)mcall->entry_point());
// Save the return address
- call_returns[b->_pre_order] = current_offset + mcall->ret_addr_offset();
+ call_returns[block->_pre_order] = current_offset + mcall->ret_addr_offset();
if (mcall->is_MachCallLeaf()) {
is_mcall = false;
@@ -1359,7 +1361,7 @@
// If this is a branch, then fill in the label with the target BB's label
else if (mach->is_MachBranch()) {
// This requires the TRUE branch target be in succs[0]
- uint block_num = b->non_connector_successor(0)->_pre_order;
+ uint block_num = block->non_connector_successor(0)->_pre_order;
// Try to replace long branch if delay slot is not used,
// it is mostly for back branches since forward branch's
@@ -1392,8 +1394,8 @@
// Insert padding between avoid_back_to_back branches.
if (needs_padding && replacement->avoid_back_to_back()) {
MachNode *nop = new (this) MachNopNode();
- b->_nodes.insert(j++, nop);
- _cfg->map_node_to_block(nop, b);
+ block->_nodes.insert(j++, nop);
+ _cfg->map_node_to_block(nop, block);
last_inst++;
nop->emit(*cb, _regalloc);
cb->flush_bundle(true);
@@ -1405,7 +1407,7 @@
jmp_size[i] = new_size;
jmp_rule[i] = mach->rule();
#endif
- b->_nodes.map(j, replacement);
+ block->_nodes.map(j, replacement);
mach->subsume_by(replacement, C);
n = replacement;
mach = replacement;
@@ -1413,8 +1415,8 @@
}
mach->as_MachBranch()->label_set( &blk_labels[block_num], block_num );
} else if (mach->ideal_Opcode() == Op_Jump) {
- for (uint h = 0; h < b->_num_succs; h++) {
- Block* succs_block = b->_succs[h];
+ for (uint h = 0; h < block->_num_succs; h++) {
+ Block* succs_block = block->_succs[h];
for (uint j = 1; j < succs_block->num_preds(); j++) {
Node* jpn = succs_block->pred(j);
if (jpn->is_JumpProj() && jpn->in(0) == mach) {
@@ -1425,7 +1427,6 @@
}
}
}
-
#ifdef ASSERT
// Check that oop-store precedes the card-mark
else if (mach->ideal_Opcode() == Op_StoreCM) {
@@ -1436,17 +1437,18 @@
if (oop_store == NULL) continue;
count++;
uint i4;
- for( i4 = 0; i4 < last_inst; ++i4 ) {
- if( b->_nodes[i4] == oop_store ) break;
+ for (i4 = 0; i4 < last_inst; ++i4) {
+ if (block->_nodes[i4] == oop_store) {
+ break;
+ }
}
// Note: This test can provide a false failure if other precedence
// edges have been added to the storeCMNode.
- assert( i4 == last_inst || i4 < storeCM_idx, "CM card-mark executes before oop-store");
+ assert(i4 == last_inst || i4 < storeCM_idx, "CM card-mark executes before oop-store");
}
assert(count > 0, "storeCM expects at least one precedence edge");
}
#endif
-
else if (!n->is_Proj()) {
// Remember the beginning of the previous instruction, in case
// it's followed by a flag-kill and a null-check. Happens on
@@ -1542,12 +1544,12 @@
// If the next block is the top of a loop, pad this block out to align
// the loop top a little. Helps prevent pipe stalls at loop back branches.
if (i < nblocks-1) {
- Block *nb = _cfg->_blocks[i+1];
+ Block *nb = _cfg->get_block(i + 1);
int padding = nb->alignment_padding(current_offset);
if( padding > 0 ) {
MachNode *nop = new (this) MachNopNode(padding / nop_size);
- b->_nodes.insert( b->_nodes.size(), nop );
- _cfg->map_node_to_block(nop, b);
+ block->_nodes.insert(block->_nodes.size(), nop);
+ _cfg->map_node_to_block(nop, block);
nop->emit(*cb, _regalloc);
current_offset = cb->insts_size();
}
@@ -1587,8 +1589,6 @@
}
#endif
- // ------------------
-
#ifndef PRODUCT
// Information on the size of the method, without the extraneous code
Scheduling::increment_method_size(cb->insts_size());
@@ -1649,52 +1649,55 @@
_inc_table.set_size(cnt);
uint inct_cnt = 0;
- for( uint i=0; i<_cfg->_num_blocks; i++ ) {
- Block *b = _cfg->_blocks[i];
+ for (uint i = 0; i < _cfg->number_of_blocks(); i++) {
+ Block* block = _cfg->get_block(i);
Node *n = NULL;
int j;
// Find the branch; ignore trailing NOPs.
- for( j = b->_nodes.size()-1; j>=0; j-- ) {
- n = b->_nodes[j];
- if( !n->is_Mach() || n->as_Mach()->ideal_Opcode() != Op_Con )
+ for (j = block->_nodes.size() - 1; j >= 0; j--) {
+ n = block->_nodes[j];
+ if (!n->is_Mach() || n->as_Mach()->ideal_Opcode() != Op_Con) {
break;
+ }
}
// If we didn't find anything, continue
- if( j < 0 ) continue;
+ if (j < 0) {
+ continue;
+ }
// Compute ExceptionHandlerTable subtable entry and add it
// (skip empty blocks)
- if( n->is_Catch() ) {
+ if (n->is_Catch()) {
// Get the offset of the return from the call
- uint call_return = call_returns[b->_pre_order];
+ uint call_return = call_returns[block->_pre_order];
#ifdef ASSERT
assert( call_return > 0, "no call seen for this basic block" );
- while( b->_nodes[--j]->is_MachProj() ) ;
- assert( b->_nodes[j]->is_MachCall(), "CatchProj must follow call" );
+ while (block->_nodes[--j]->is_MachProj()) ;
+ assert(block->_nodes[j]->is_MachCall(), "CatchProj must follow call");
#endif
// last instruction is a CatchNode, find it's CatchProjNodes
- int nof_succs = b->_num_succs;
+ int nof_succs = block->_num_succs;
// allocate space
GrowableArray<intptr_t> handler_bcis(nof_succs);
GrowableArray<intptr_t> handler_pcos(nof_succs);
// iterate through all successors
for (int j = 0; j < nof_succs; j++) {
- Block* s = b->_succs[j];
+ Block* s = block->_succs[j];
bool found_p = false;
- for( uint k = 1; k < s->num_preds(); k++ ) {
- Node *pk = s->pred(k);
- if( pk->is_CatchProj() && pk->in(0) == n ) {
+ for (uint k = 1; k < s->num_preds(); k++) {
+ Node* pk = s->pred(k);
+ if (pk->is_CatchProj() && pk->in(0) == n) {
const CatchProjNode* p = pk->as_CatchProj();
found_p = true;
// add the corresponding handler bci & pco information
- if( p->_con != CatchProjNode::fall_through_index ) {
+ if (p->_con != CatchProjNode::fall_through_index) {
// p leads to an exception handler (and is not fall through)
- assert(s == _cfg->_blocks[s->_pre_order],"bad numbering");
+ assert(s == _cfg->get_block(s->_pre_order), "bad numbering");
// no duplicates, please
- if( !handler_bcis.contains(p->handler_bci()) ) {
+ if (!handler_bcis.contains(p->handler_bci())) {
uint block_num = s->non_connector()->_pre_order;
handler_bcis.append(p->handler_bci());
handler_pcos.append(blk_labels[block_num].loc_pos());
@@ -1713,9 +1716,9 @@
}
// Handle implicit null exception table updates
- if( n->is_MachNullCheck() ) {
- uint block_num = b->non_connector_successor(0)->_pre_order;
- _inc_table.append( inct_starts[inct_cnt++], blk_labels[block_num].loc_pos() );
+ if (n->is_MachNullCheck()) {
+ uint block_num = block->non_connector_successor(0)->_pre_order;
+ _inc_table.append(inct_starts[inct_cnt++], blk_labels[block_num].loc_pos());
continue;
}
} // End of for all blocks fill in exception table entries
@@ -1774,14 +1777,12 @@
memset(_current_latency, 0, node_max * sizeof(unsigned short));
// Clear the bundling information
- memcpy(_bundle_use_elements,
- Pipeline_Use::elaborated_elements,
- sizeof(Pipeline_Use::elaborated_elements));
+ memcpy(_bundle_use_elements, Pipeline_Use::elaborated_elements, sizeof(Pipeline_Use::elaborated_elements));
// Get the last node
- Block *bb = _cfg->_blocks[_cfg->_blocks.size()-1];
-
- _next_node = bb->_nodes[bb->_nodes.size()-1];
+ Block* block = _cfg->get_block(_cfg->number_of_blocks() - 1);
+
+ _next_node = block->_nodes[block->_nodes.size() - 1];
}
#ifndef PRODUCT
@@ -1831,7 +1832,6 @@
sizeof(Pipeline_Use::elaborated_elements));
}
-//------------------------------ScheduleAndBundle------------------------------
// Perform instruction scheduling and bundling over the sequence of
// instructions in backwards order.
void Compile::ScheduleAndBundle() {
@@ -1858,7 +1858,6 @@
scheduling.DoScheduling();
}
-//------------------------------ComputeLocalLatenciesForward-------------------
// Compute the latency of all the instructions. This is fairly simple,
// because we already have a legal ordering. Walk over the instructions
// from first to last, and compute the latency of the instruction based
@@ -2028,7 +2027,6 @@
return _available[0];
}
-//------------------------------AddNodeToAvailableList-------------------------
void Scheduling::AddNodeToAvailableList(Node *n) {
assert( !n->is_Proj(), "projections never directly made available" );
#ifndef PRODUCT
@@ -2074,7 +2072,6 @@
#endif
}
-//------------------------------DecrementUseCounts-----------------------------
void Scheduling::DecrementUseCounts(Node *n, const Block *bb) {
for ( uint i=0; i < n->len(); i++ ) {
Node *def = n->in(i);
@@ -2097,7 +2094,6 @@
}
}
-//------------------------------AddNodeToBundle--------------------------------
void Scheduling::AddNodeToBundle(Node *n, const Block *bb) {
#ifndef PRODUCT
if (_cfg->C->trace_opto_output()) {
@@ -2312,7 +2308,6 @@
DecrementUseCounts(n,bb);
}
-//------------------------------ComputeUseCount--------------------------------
// This method sets the use count within a basic block. We will ignore all
// uses outside the current basic block. As we are doing a backwards walk,
// any node we reach that has a use count of 0 may be scheduled. This also
@@ -2397,20 +2392,22 @@
Block *bb;
// Walk over all the basic blocks in reverse order
- for( int i=_cfg->_num_blocks-1; i >= 0; succ_bb = bb, i-- ) {
- bb = _cfg->_blocks[i];
+ for (int i = _cfg->number_of_blocks() - 1; i >= 0; succ_bb = bb, i--) {
+ bb = _cfg->get_block(i);
#ifndef PRODUCT
if (_cfg->C->trace_opto_output()) {
tty->print("# Schedule BB#%03d (initial)\n", i);
- for (uint j = 0; j < bb->_nodes.size(); j++)
+ for (uint j = 0; j < bb->_nodes.size(); j++) {
bb->_nodes[j]->dump();
+ }
}
#endif
// On the head node, skip processing
- if( bb == _cfg->_broot )
+ if (bb == _cfg->get_root_block()) {
continue;
+ }
// Skip empty, connector blocks
if (bb->is_connector())
@@ -2547,7 +2544,6 @@
} // end DoScheduling
-//------------------------------verify_good_schedule---------------------------
// Verify that no live-range used in the block is killed in the block by a
// wrong DEF. This doesn't verify live-ranges that span blocks.
@@ -2560,7 +2556,6 @@
}
#ifdef ASSERT
-//------------------------------verify_do_def----------------------------------
void Scheduling::verify_do_def( Node *n, OptoReg::Name def, const char *msg ) {
// Check for bad kills
if( OptoReg::is_valid(def) ) { // Ignore stores & control flow
@@ -2576,7 +2571,6 @@
}
}
-//------------------------------verify_good_schedule---------------------------
void Scheduling::verify_good_schedule( Block *b, const char *msg ) {
// Zap to something reasonable for the verify code
@@ -2636,7 +2630,6 @@
from->add_prec(to);
}
-//------------------------------anti_do_def------------------------------------
void Scheduling::anti_do_def( Block *b, Node *def, OptoReg::Name def_reg, int is_def ) {
if( !OptoReg::is_valid(def_reg) ) // Ignore stores & control flow
return;
@@ -2706,7 +2699,6 @@
add_prec_edge_from_to(kill,pinch);
}
-//------------------------------anti_do_use------------------------------------
void Scheduling::anti_do_use( Block *b, Node *use, OptoReg::Name use_reg ) {
if( !OptoReg::is_valid(use_reg) ) // Ignore stores & control flow
return;
@@ -2727,7 +2719,6 @@
}
}
-//------------------------------ComputeRegisterAntidependences-----------------
// We insert antidependences between the reads and following write of
// allocated registers to prevent illegal code motion. Hopefully, the
// number of added references should be fairly small, especially as we
@@ -2861,8 +2852,6 @@
}
}
-//------------------------------garbage_collect_pinch_nodes-------------------------------
-
// Garbage collect pinch nodes for reuse by other blocks.
//
// The block scheduler's insertion of anti-dependence
@@ -2937,7 +2926,6 @@
pinch->set_req(0, NULL);
}
-//------------------------------print_statistics-------------------------------
#ifndef PRODUCT
void Scheduling::dump_available() const {
--- a/hotspot/src/share/vm/opto/phaseX.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/phaseX.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -1643,8 +1643,8 @@
bool method_name_not_printed = true;
// Examine each basic block
- for( uint block_number = 1; block_number < _cfg._num_blocks; ++block_number ) {
- Block *block = _cfg._blocks[block_number];
+ for (uint block_number = 1; block_number < _cfg.number_of_blocks(); ++block_number) {
+ Block* block = _cfg.get_block(block_number);
bool block_not_printed = true;
// and each instruction within a block
--- a/hotspot/src/share/vm/opto/postaloc.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/postaloc.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -405,28 +405,29 @@
// Need a mapping from basic block Node_Lists. We need a Node_List to
// map from register number to value-producing Node.
- Node_List **blk2value = NEW_RESOURCE_ARRAY( Node_List *, _cfg._num_blocks+1);
- memset( blk2value, 0, sizeof(Node_List*)*(_cfg._num_blocks+1) );
+ Node_List **blk2value = NEW_RESOURCE_ARRAY( Node_List *, _cfg.number_of_blocks() + 1);
+ memset(blk2value, 0, sizeof(Node_List*) * (_cfg.number_of_blocks() + 1));
// Need a mapping from basic block Node_Lists. We need a Node_List to
// map from register number to register-defining Node.
- Node_List **blk2regnd = NEW_RESOURCE_ARRAY( Node_List *, _cfg._num_blocks+1);
- memset( blk2regnd, 0, sizeof(Node_List*)*(_cfg._num_blocks+1) );
+ Node_List **blk2regnd = NEW_RESOURCE_ARRAY( Node_List *, _cfg.number_of_blocks() + 1);
+ memset(blk2regnd, 0, sizeof(Node_List*) * (_cfg.number_of_blocks() + 1));
// We keep unused Node_Lists on a free_list to avoid wasting
// memory.
GrowableArray<Node_List*> free_list = GrowableArray<Node_List*>(16);
// For all blocks
- for( uint i = 0; i < _cfg._num_blocks; i++ ) {
+ for (uint i = 0; i < _cfg.number_of_blocks(); i++) {
uint j;
- Block *b = _cfg._blocks[i];
+ Block* block = _cfg.get_block(i);
// Count of Phis in block
uint phi_dex;
- for( phi_dex = 1; phi_dex < b->_nodes.size(); phi_dex++ ) {
- Node *phi = b->_nodes[phi_dex];
- if( !phi->is_Phi() )
+ for (phi_dex = 1; phi_dex < block->_nodes.size(); phi_dex++) {
+ Node* phi = block->_nodes[phi_dex];
+ if (!phi->is_Phi()) {
break;
+ }
}
// If any predecessor has not been visited, we do not know the state
@@ -434,21 +435,23 @@
// along Phi input edges
bool missing_some_inputs = false;
Block *freed = NULL;
- for( j = 1; j < b->num_preds(); j++ ) {
- Block *pb = _cfg.get_block_for_node(b->pred(j));
+ for (j = 1; j < block->num_preds(); j++) {
+ Block* pb = _cfg.get_block_for_node(block->pred(j));
// Remove copies along phi edges
- for( uint k=1; k<phi_dex; k++ )
- elide_copy( b->_nodes[k], j, b, *blk2value[pb->_pre_order], *blk2regnd[pb->_pre_order], false );
- if( blk2value[pb->_pre_order] ) { // Have a mapping on this edge?
+ for (uint k = 1; k < phi_dex; k++) {
+ elide_copy(block->_nodes[k], j, block, *blk2value[pb->_pre_order], *blk2regnd[pb->_pre_order], false);
+ }
+ if (blk2value[pb->_pre_order]) { // Have a mapping on this edge?
// See if this predecessor's mappings have been used by everybody
// who wants them. If so, free 'em.
uint k;
- for( k=0; k<pb->_num_succs; k++ ) {
- Block *pbsucc = pb->_succs[k];
- if( !blk2value[pbsucc->_pre_order] && pbsucc != b )
+ for (k = 0; k < pb->_num_succs; k++) {
+ Block* pbsucc = pb->_succs[k];
+ if (!blk2value[pbsucc->_pre_order] && pbsucc != block) {
break; // Found a future user
+ }
}
- if( k >= pb->_num_succs ) { // No more uses, free!
+ if (k >= pb->_num_succs) { // No more uses, free!
freed = pb; // Record last block freed
free_list.push(blk2value[pb->_pre_order]);
free_list.push(blk2regnd[pb->_pre_order]);
@@ -467,20 +470,20 @@
value.map(_max_reg,NULL);
regnd.map(_max_reg,NULL);
// Set mappings as OUR mappings
- blk2value[b->_pre_order] = &value;
- blk2regnd[b->_pre_order] = ®nd;
+ blk2value[block->_pre_order] = &value;
+ blk2regnd[block->_pre_order] = ®nd;
// Initialize value & regnd for this block
- if( missing_some_inputs ) {
+ if (missing_some_inputs) {
// Some predecessor has not yet been visited; zap map to empty
- for( uint k = 0; k < (uint)_max_reg; k++ ) {
+ for (uint k = 0; k < (uint)_max_reg; k++) {
value.map(k,NULL);
regnd.map(k,NULL);
}
} else {
if( !freed ) { // Didn't get a freebie prior block
// Must clone some data
- freed = _cfg.get_block_for_node(b->pred(1));
+ freed = _cfg.get_block_for_node(block->pred(1));
Node_List &f_value = *blk2value[freed->_pre_order];
Node_List &f_regnd = *blk2regnd[freed->_pre_order];
for( uint k = 0; k < (uint)_max_reg; k++ ) {
@@ -489,9 +492,11 @@
}
}
// Merge all inputs together, setting to NULL any conflicts.
- for( j = 1; j < b->num_preds(); j++ ) {
- Block *pb = _cfg.get_block_for_node(b->pred(j));
- if( pb == freed ) continue; // Did self already via freelist
+ for (j = 1; j < block->num_preds(); j++) {
+ Block* pb = _cfg.get_block_for_node(block->pred(j));
+ if (pb == freed) {
+ continue; // Did self already via freelist
+ }
Node_List &p_regnd = *blk2regnd[pb->_pre_order];
for( uint k = 0; k < (uint)_max_reg; k++ ) {
if( regnd[k] != p_regnd[k] ) { // Conflict on reaching defs?
@@ -503,9 +508,9 @@
}
// For all Phi's
- for( j = 1; j < phi_dex; j++ ) {
+ for (j = 1; j < phi_dex; j++) {
uint k;
- Node *phi = b->_nodes[j];
+ Node *phi = block->_nodes[j];
uint pidx = _lrg_map.live_range_id(phi);
OptoReg::Name preg = lrgs(_lrg_map.live_range_id(phi)).reg();
@@ -516,8 +521,8 @@
if( phi != x && u != x ) // Found a different input
u = u ? NodeSentinel : x; // Capture unique input, or NodeSentinel for 2nd input
}
- if( u != NodeSentinel ) { // Junk Phi. Remove
- b->_nodes.remove(j--);
+ if (u != NodeSentinel) { // Junk Phi. Remove
+ block->_nodes.remove(j--);
phi_dex--;
_cfg.unmap_node_from_block(phi);
phi->replace_by(u);
@@ -547,13 +552,13 @@
}
// For all remaining instructions
- for( j = phi_dex; j < b->_nodes.size(); j++ ) {
- Node *n = b->_nodes[j];
+ for (j = phi_dex; j < block->_nodes.size(); j++) {
+ Node* n = block->_nodes[j];
- if( n->outcnt() == 0 && // Dead?
- n != C->top() && // (ignore TOP, it has no du info)
- !n->is_Proj() ) { // fat-proj kills
- j -= yank_if_dead(n,b,&value,®nd);
+ if(n->outcnt() == 0 && // Dead?
+ n != C->top() && // (ignore TOP, it has no du info)
+ !n->is_Proj() ) { // fat-proj kills
+ j -= yank_if_dead(n, block, &value, ®nd);
continue;
}
@@ -598,8 +603,9 @@
const uint two_adr = n->is_Mach() ? n->as_Mach()->two_adr() : 0;
// Remove copies along input edges
- for( k = 1; k < n->req(); k++ )
- j -= elide_copy( n, k, b, value, regnd, two_adr!=k );
+ for (k = 1; k < n->req(); k++) {
+ j -= elide_copy(n, k, block, value, regnd, two_adr != k);
+ }
// Unallocated Nodes define no registers
uint lidx = _lrg_map.live_range_id(n);
@@ -630,8 +636,8 @@
// then 'n' is a useless copy. Do not update the register->node
// mapping so 'n' will go dead.
if( value[nreg] != val ) {
- if (eliminate_copy_of_constant(val, n, b, value, regnd, nreg, OptoReg::Bad)) {
- j -= replace_and_yank_if_dead(n, nreg, b, value, regnd);
+ if (eliminate_copy_of_constant(val, n, block, value, regnd, nreg, OptoReg::Bad)) {
+ j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
} else {
// Update the mapping: record new Node defined by the register
regnd.map(nreg,n);
@@ -640,8 +646,8 @@
value.map(nreg,val);
}
} else if( !may_be_copy_of_callee(n) ) {
- assert( n->is_Copy(), "" );
- j -= replace_and_yank_if_dead(n, nreg, b, value, regnd);
+ assert(n->is_Copy(), "");
+ j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
}
} else if (RegMask::is_vector(n_ideal_reg)) {
// If Node 'n' does not change the value mapped by the register,
@@ -660,7 +666,7 @@
}
} else if (n->is_Copy()) {
// Note: vector can't be constant and can't be copy of calee.
- j -= replace_and_yank_if_dead(n, nreg, b, value, regnd);
+ j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
}
} else {
// If the value occupies a register pair, record same info
@@ -674,18 +680,18 @@
tmp.Remove(nreg);
nreg_lo = tmp.find_first_elem();
}
- if( value[nreg] != val || value[nreg_lo] != val ) {
- if (eliminate_copy_of_constant(val, n, b, value, regnd, nreg, nreg_lo)) {
- j -= replace_and_yank_if_dead(n, nreg, b, value, regnd);
+ if (value[nreg] != val || value[nreg_lo] != val) {
+ if (eliminate_copy_of_constant(val, n, block, value, regnd, nreg, nreg_lo)) {
+ j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
} else {
regnd.map(nreg , n );
regnd.map(nreg_lo, n );
value.map(nreg ,val);
value.map(nreg_lo,val);
}
- } else if( !may_be_copy_of_callee(n) ) {
- assert( n->is_Copy(), "" );
- j -= replace_and_yank_if_dead(n, nreg, b, value, regnd);
+ } else if (!may_be_copy_of_callee(n)) {
+ assert(n->is_Copy(), "");
+ j -= replace_and_yank_if_dead(n, nreg, block, value, regnd);
}
}
--- a/hotspot/src/share/vm/opto/reg_split.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/opto/reg_split.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -397,10 +397,15 @@
#endif
// See if the cloned def kills any flags, and copy those kills as well
uint i = insidx+1;
- if( clone_projs( b, i, def, spill, maxlrg) ) {
+ int found_projs = clone_projs( b, i, def, spill, maxlrg);
+ if (found_projs > 0) {
// Adjust the point where we go hi-pressure
- if( i <= b->_ihrp_index ) b->_ihrp_index++;
- if( i <= b->_fhrp_index ) b->_fhrp_index++;
+ if (i <= b->_ihrp_index) {
+ b->_ihrp_index += found_projs;
+ }
+ if (i <= b->_fhrp_index) {
+ b->_fhrp_index += found_projs;
+ }
}
return spill;
@@ -529,13 +534,13 @@
// a Def is UP or DOWN. UP means that it should get a register (ie -
// it is always in LRP regions), and DOWN means that it is probably
// on the stack (ie - it crosses HRP regions).
- Node ***Reaches = NEW_SPLIT_ARRAY( Node**, _cfg._num_blocks+1 );
- bool **UP = NEW_SPLIT_ARRAY( bool*, _cfg._num_blocks+1 );
+ Node ***Reaches = NEW_SPLIT_ARRAY( Node**, _cfg.number_of_blocks() + 1);
+ bool **UP = NEW_SPLIT_ARRAY( bool*, _cfg.number_of_blocks() + 1);
Node **debug_defs = NEW_SPLIT_ARRAY( Node*, spill_cnt );
VectorSet **UP_entry= NEW_SPLIT_ARRAY( VectorSet*, spill_cnt );
// Initialize Reaches & UP
- for( bidx = 0; bidx < _cfg._num_blocks+1; bidx++ ) {
+ for (bidx = 0; bidx < _cfg.number_of_blocks() + 1; bidx++) {
Reaches[bidx] = NEW_SPLIT_ARRAY( Node*, spill_cnt );
UP[bidx] = NEW_SPLIT_ARRAY( bool, spill_cnt );
Node **Reachblock = Reaches[bidx];
@@ -555,13 +560,13 @@
//----------PASS 1----------
//----------Propagation & Node Insertion Code----------
// Walk the Blocks in RPO for DEF & USE info
- for( bidx = 0; bidx < _cfg._num_blocks; bidx++ ) {
+ for( bidx = 0; bidx < _cfg.number_of_blocks(); bidx++ ) {
if (C->check_node_count(spill_cnt, out_of_nodes)) {
return 0;
}
- b = _cfg._blocks[bidx];
+ b = _cfg.get_block(bidx);
// Reaches & UP arrays for this block
Reachblock = Reaches[b->_pre_order];
UPblock = UP[b->_pre_order];
@@ -1394,8 +1399,8 @@
// DEBUG
#ifdef ASSERT
// Validate all live range index assignments
- for (bidx = 0; bidx < _cfg._num_blocks; bidx++) {
- b = _cfg._blocks[bidx];
+ for (bidx = 0; bidx < _cfg.number_of_blocks(); bidx++) {
+ b = _cfg.get_block(bidx);
for (insidx = 0; insidx <= b->end_idx(); insidx++) {
Node *n = b->_nodes[insidx];
uint defidx = _lrg_map.find(n);
--- a/hotspot/src/share/vm/prims/whitebox.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/prims/whitebox.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -196,12 +196,22 @@
VMThread::execute(&op);
WB_END
-WB_ENTRY(jint, WB_DeoptimizeMethod(JNIEnv* env, jobject o, jobject method))
+WB_ENTRY(jint, WB_DeoptimizeMethod(JNIEnv* env, jobject o, jobject method, jboolean is_osr))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
MutexLockerEx mu(Compile_lock);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
int result = 0;
- nmethod* code = mh->code();
+ nmethod* code;
+ if (is_osr) {
+ int bci = InvocationEntryBci;
+ while ((code = mh->lookup_osr_nmethod_for(bci, CompLevel_none, false)) != NULL) {
+ code->mark_for_deoptimization();
+ ++result;
+ bci = code->osr_entry_bci() + 1;
+ }
+ } else {
+ code = mh->code();
+ }
if (code != NULL) {
code->mark_for_deoptimization();
++result;
@@ -214,22 +224,26 @@
return result;
WB_END
-WB_ENTRY(jboolean, WB_IsMethodCompiled(JNIEnv* env, jobject o, jobject method))
+WB_ENTRY(jboolean, WB_IsMethodCompiled(JNIEnv* env, jobject o, jobject method, jboolean is_osr))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
MutexLockerEx mu(Compile_lock);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
- nmethod* code = mh->code();
+ nmethod* code = is_osr ? mh->lookup_osr_nmethod_for(InvocationEntryBci, CompLevel_none, false) : mh->code();
if (code == NULL) {
return JNI_FALSE;
}
return (code->is_alive() && !code->is_marked_for_deoptimization());
WB_END
-WB_ENTRY(jboolean, WB_IsMethodCompilable(JNIEnv* env, jobject o, jobject method, jint comp_level))
+WB_ENTRY(jboolean, WB_IsMethodCompilable(JNIEnv* env, jobject o, jobject method, jint comp_level, jboolean is_osr))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
MutexLockerEx mu(Compile_lock);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
- return CompilationPolicy::can_be_compiled(mh, comp_level);
+ if (is_osr) {
+ return CompilationPolicy::can_be_osr_compiled(mh, comp_level);
+ } else {
+ return CompilationPolicy::can_be_compiled(mh, comp_level);
+ }
WB_END
WB_ENTRY(jboolean, WB_IsMethodQueuedForCompilation(JNIEnv* env, jobject o, jobject method))
@@ -239,18 +253,28 @@
return mh->queued_for_compilation();
WB_END
-WB_ENTRY(jint, WB_GetMethodCompilationLevel(JNIEnv* env, jobject o, jobject method))
+WB_ENTRY(jint, WB_GetMethodCompilationLevel(JNIEnv* env, jobject o, jobject method, jboolean is_osr))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
- nmethod* code = mh->code();
+ nmethod* code = is_osr ? mh->lookup_osr_nmethod_for(InvocationEntryBci, CompLevel_none, false) : mh->code();
return (code != NULL ? code->comp_level() : CompLevel_none);
WB_END
-
-WB_ENTRY(void, WB_MakeMethodNotCompilable(JNIEnv* env, jobject o, jobject method, jint comp_level))
+WB_ENTRY(void, WB_MakeMethodNotCompilable(JNIEnv* env, jobject o, jobject method, jint comp_level, jboolean is_osr))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
- mh->set_not_compilable(comp_level, true /* report */, "WhiteBox");
+ if (is_osr) {
+ mh->set_not_osr_compilable(comp_level, true /* report */, "WhiteBox");
+ } else {
+ mh->set_not_compilable(comp_level, true /* report */, "WhiteBox");
+ }
+WB_END
+
+WB_ENTRY(jint, WB_GetMethodEntryBci(JNIEnv* env, jobject o, jobject method))
+ jmethodID jmid = reflected_method_to_jmid(thread, env, method);
+ methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
+ nmethod* code = mh->lookup_osr_nmethod_for(InvocationEntryBci, CompLevel_none, false);
+ return (code != NULL && code->is_osr_method() ? code->osr_entry_bci() : InvocationEntryBci);
WB_END
WB_ENTRY(jboolean, WB_TestSetDontInlineMethod(JNIEnv* env, jobject o, jobject method, jboolean value))
@@ -261,12 +285,15 @@
return result;
WB_END
-WB_ENTRY(jint, WB_GetCompileQueuesSize(JNIEnv* env, jobject o))
- return CompileBroker::queue_size(CompLevel_full_optimization) /* C2 */ +
- CompileBroker::queue_size(CompLevel_full_profile) /* C1 */;
+WB_ENTRY(jint, WB_GetCompileQueueSize(JNIEnv* env, jobject o, jint comp_level))
+ if (comp_level == CompLevel_any) {
+ return CompileBroker::queue_size(CompLevel_full_optimization) /* C2 */ +
+ CompileBroker::queue_size(CompLevel_full_profile) /* C1 */;
+ } else {
+ return CompileBroker::queue_size(comp_level);
+ }
WB_END
-
WB_ENTRY(jboolean, WB_TestSetForceInlineMethod(JNIEnv* env, jobject o, jobject method, jboolean value))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
@@ -275,10 +302,10 @@
return result;
WB_END
-WB_ENTRY(jboolean, WB_EnqueueMethodForCompilation(JNIEnv* env, jobject o, jobject method, jint comp_level))
+WB_ENTRY(jboolean, WB_EnqueueMethodForCompilation(JNIEnv* env, jobject o, jobject method, jint comp_level, jint bci))
jmethodID jmid = reflected_method_to_jmid(thread, env, method);
methodHandle mh(THREAD, Method::checked_resolve_jmethod_id(jmid));
- nmethod* nm = CompileBroker::compile_method(mh, InvocationEntryBci, comp_level, mh, mh->invocation_count(), "WhiteBox", THREAD);
+ nmethod* nm = CompileBroker::compile_method(mh, bci, comp_level, mh, mh->invocation_count(), "WhiteBox", THREAD);
MutexLockerEx mu(Compile_lock);
return (mh->queued_for_compilation() || nm != NULL);
WB_END
@@ -324,7 +351,6 @@
return (StringTable::lookup(name, len) != NULL);
WB_END
-
WB_ENTRY(void, WB_FullGC(JNIEnv* env, jobject o))
Universe::heap()->collector_policy()->set_should_clear_all_soft_refs(true);
Universe::heap()->collect(GCCause::_last_ditch_collection);
@@ -423,31 +449,32 @@
{CC"NMTWaitForDataMerge", CC"()Z", (void*)&WB_NMTWaitForDataMerge},
#endif // INCLUDE_NMT
{CC"deoptimizeAll", CC"()V", (void*)&WB_DeoptimizeAll },
- {CC"deoptimizeMethod", CC"(Ljava/lang/reflect/Executable;)I",
+ {CC"deoptimizeMethod", CC"(Ljava/lang/reflect/Executable;Z)I",
(void*)&WB_DeoptimizeMethod },
- {CC"isMethodCompiled", CC"(Ljava/lang/reflect/Executable;)Z",
+ {CC"isMethodCompiled", CC"(Ljava/lang/reflect/Executable;Z)Z",
(void*)&WB_IsMethodCompiled },
- {CC"isMethodCompilable", CC"(Ljava/lang/reflect/Executable;I)Z",
+ {CC"isMethodCompilable", CC"(Ljava/lang/reflect/Executable;IZ)Z",
(void*)&WB_IsMethodCompilable},
{CC"isMethodQueuedForCompilation",
CC"(Ljava/lang/reflect/Executable;)Z", (void*)&WB_IsMethodQueuedForCompilation},
{CC"makeMethodNotCompilable",
- CC"(Ljava/lang/reflect/Executable;I)V", (void*)&WB_MakeMethodNotCompilable},
+ CC"(Ljava/lang/reflect/Executable;IZ)V", (void*)&WB_MakeMethodNotCompilable},
{CC"testSetDontInlineMethod",
CC"(Ljava/lang/reflect/Executable;Z)Z", (void*)&WB_TestSetDontInlineMethod},
{CC"getMethodCompilationLevel",
- CC"(Ljava/lang/reflect/Executable;)I", (void*)&WB_GetMethodCompilationLevel},
- {CC"getCompileQueuesSize",
- CC"()I", (void*)&WB_GetCompileQueuesSize},
+ CC"(Ljava/lang/reflect/Executable;Z)I", (void*)&WB_GetMethodCompilationLevel},
+ {CC"getMethodEntryBci",
+ CC"(Ljava/lang/reflect/Executable;)I", (void*)&WB_GetMethodEntryBci},
+ {CC"getCompileQueueSize",
+ CC"(I)I", (void*)&WB_GetCompileQueueSize},
{CC"testSetForceInlineMethod",
CC"(Ljava/lang/reflect/Executable;Z)Z", (void*)&WB_TestSetForceInlineMethod},
{CC"enqueueMethodForCompilation",
- CC"(Ljava/lang/reflect/Executable;I)Z", (void*)&WB_EnqueueMethodForCompilation},
+ CC"(Ljava/lang/reflect/Executable;II)Z", (void*)&WB_EnqueueMethodForCompilation},
{CC"clearMethodState",
CC"(Ljava/lang/reflect/Executable;)V", (void*)&WB_ClearMethodState},
{CC"isInStringTable", CC"(Ljava/lang/String;)Z", (void*)&WB_IsInStringTable },
{CC"fullGC", CC"()V", (void*)&WB_FullGC },
-
{CC"readReservedMemory", CC"()V", (void*)&WB_ReadReservedMemory },
};
--- a/hotspot/src/share/vm/runtime/compilationPolicy.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/runtime/compilationPolicy.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -138,6 +138,23 @@
return false;
}
+// Returns true if m is allowed to be osr compiled
+bool CompilationPolicy::can_be_osr_compiled(methodHandle m, int comp_level) {
+ bool result = false;
+ if (comp_level == CompLevel_all) {
+ if (TieredCompilation) {
+ // enough to be osr compilable at any level for tiered
+ result = !m->is_not_osr_compilable(CompLevel_simple) || !m->is_not_osr_compilable(CompLevel_full_optimization);
+ } else {
+ // must be osr compilable at available level for non-tiered
+ result = !m->is_not_osr_compilable(CompLevel_highest_tier);
+ }
+ } else if (is_compile(comp_level)) {
+ result = !m->is_not_osr_compilable(comp_level);
+ }
+ return (result && can_be_compiled(m, comp_level));
+}
+
bool CompilationPolicy::is_compilation_enabled() {
// NOTE: CompileBroker::should_compile_new_jobs() checks for UseCompiler
return !delay_compilation_during_startup() && CompileBroker::should_compile_new_jobs();
@@ -458,7 +475,7 @@
const int hot_count = m->backedge_count();
const char* comment = "backedge_count";
- if (is_compilation_enabled() && !m->is_not_osr_compilable(comp_level) && can_be_compiled(m, comp_level)) {
+ if (is_compilation_enabled() && can_be_osr_compiled(m, comp_level)) {
CompileBroker::compile_method(m, bci, comp_level, m, hot_count, comment, thread);
NOT_PRODUCT(trace_osr_completion(m->lookup_osr_nmethod_for(bci, comp_level, true));)
}
@@ -514,7 +531,7 @@
const int hot_count = m->backedge_count();
const char* comment = "backedge_count";
- if (is_compilation_enabled() && !m->is_not_osr_compilable(comp_level) && can_be_compiled(m, comp_level)) {
+ if (is_compilation_enabled() && can_be_osr_compiled(m, comp_level)) {
CompileBroker::compile_method(m, bci, comp_level, m, hot_count, comment, thread);
NOT_PRODUCT(trace_osr_completion(m->lookup_osr_nmethod_for(bci, comp_level, true));)
}
--- a/hotspot/src/share/vm/runtime/compilationPolicy.hpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/runtime/compilationPolicy.hpp Mon Aug 19 09:33:29 2013 +0200
@@ -52,6 +52,8 @@
static bool must_be_compiled(methodHandle m, int comp_level = CompLevel_all);
// m is allowed to be compiled
static bool can_be_compiled(methodHandle m, int comp_level = CompLevel_all);
+ // m is allowed to be osr compiled
+ static bool can_be_osr_compiled(methodHandle m, int comp_level = CompLevel_all);
static bool is_compilation_enabled();
static void set_policy(CompilationPolicy* policy) { _policy = policy; }
static CompilationPolicy* policy() { return _policy; }
--- a/hotspot/src/share/vm/runtime/frame.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/runtime/frame.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
*/
#include "precompiled.hpp"
+#include "compiler/abstractCompiler.hpp"
#include "compiler/disassembler.hpp"
#include "gc_interface/collectedHeap.inline.hpp"
#include "interpreter/interpreter.hpp"
@@ -559,7 +560,7 @@
st->print("%s frame (sp=" INTPTR_FORMAT " unextended sp=" INTPTR_FORMAT, print_name(), sp(), unextended_sp());
if (sp() != NULL)
- st->print(", fp=" INTPTR_FORMAT ", pc=" INTPTR_FORMAT, fp(), pc());
+ st->print(", fp=" INTPTR_FORMAT ", real_fp=" INTPTR_FORMAT ", pc=" INTPTR_FORMAT, fp(), real_fp(), pc());
if (StubRoutines::contains(pc())) {
st->print_cr(")");
@@ -720,11 +721,14 @@
} else if (_cb->is_buffer_blob()) {
st->print("v ~BufferBlob::%s", ((BufferBlob *)_cb)->name());
} else if (_cb->is_nmethod()) {
- Method* m = ((nmethod *)_cb)->method();
+ nmethod* nm = (nmethod*)_cb;
+ Method* m = nm->method();
if (m != NULL) {
m->name_and_sig_as_C_string(buf, buflen);
- st->print("J %s @ " PTR_FORMAT " [" PTR_FORMAT "+" SIZE_FORMAT "]",
- buf, _pc, _cb->code_begin(), _pc - _cb->code_begin());
+ st->print("J %d%s %s %s (%d bytes) @ " PTR_FORMAT " [" PTR_FORMAT "+0x%x]",
+ nm->compile_id(), (nm->is_osr_method() ? "%" : ""),
+ ((nm->compiler() != NULL) ? nm->compiler()->name() : ""),
+ buf, m->code_size(), _pc, _cb->code_begin(), _pc - _cb->code_begin());
} else {
st->print("J " PTR_FORMAT, pc());
}
--- a/hotspot/src/share/vm/runtime/vmStructs.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/runtime/vmStructs.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -1096,10 +1096,10 @@
\
c2_nonstatic_field(MachCallRuntimeNode, _name, const char*) \
\
- c2_nonstatic_field(PhaseCFG, _num_blocks, uint) \
+ c2_nonstatic_field(PhaseCFG, _number_of_blocks, uint) \
c2_nonstatic_field(PhaseCFG, _blocks, Block_List) \
c2_nonstatic_field(PhaseCFG, _node_to_block_mapping, Block_Array) \
- c2_nonstatic_field(PhaseCFG, _broot, Block*) \
+ c2_nonstatic_field(PhaseCFG, _root_block, Block*) \
\
c2_nonstatic_field(PhaseRegAlloc, _node_regs, OptoRegPair*) \
c2_nonstatic_field(PhaseRegAlloc, _node_regs_max_index, uint) \
--- a/hotspot/src/share/vm/utilities/vmError.cpp Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/src/share/vm/utilities/vmError.cpp Mon Aug 19 09:33:29 2013 +0200
@@ -586,6 +586,13 @@
while (count++ < StackPrintLimit) {
fr.print_on_error(st, buf, sizeof(buf));
st->cr();
+ // Compiled code may use EBP register on x86 so it looks like
+ // non-walkable C frame. Use frame.sender() for java frames.
+ if (_thread && _thread->is_Java_thread() && fr.is_java_frame()) {
+ RegisterMap map((JavaThread*)_thread, false); // No update
+ fr = fr.sender(&map);
+ continue;
+ }
if (os::is_first_C_frame(&fr)) break;
fr = os::get_sender_for_C_frame(&fr);
}
--- a/hotspot/test/compiler/ciReplay/common.sh Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/ciReplay/common.sh Mon Aug 19 09:33:29 2013 +0200
@@ -89,7 +89,10 @@
# $1 - initial error_code
common_tests() {
positive_test $1 "COMMON :: THE SAME FLAGS"
- positive_test `expr $1 + 1` "COMMON :: TIERED" -XX:+TieredCompilation
+ if [ $tiered_available -eq 1 ]
+ then
+ positive_test `expr $1 + 1` "COMMON :: TIERED" -XX:+TieredCompilation
+ fi
}
# $1 - initial error_code
@@ -115,8 +118,11 @@
then
negative_test $1 "SERVER :: NON-TIERED" -XX:-TieredCompilation \
-server
- positive_test `expr $1 + 1` "SERVER :: TIERED" -XX:+TieredCompilation \
- -server
+ if [ $tiered_available -eq 1 ]
+ then
+ positive_test `expr $1 + 1` "SERVER :: TIERED" -XX:+TieredCompilation \
+ -server
+ fi
fi
nontiered_tests `expr $1 + 2` $client_level
}
@@ -167,6 +173,9 @@
grep -c Client`
server_available=`${JAVA} ${TESTVMOPTS} -server -Xinternalversion 2>&1 | \
grep -c Server`
+tiered_available=`${JAVA} ${TESTVMOPTS} -XX:+TieredCompilation -XX:+PrintFlagsFinal -version | \
+ grep TieredCompilation | \
+ grep -c true`
is_tiered=`${JAVA} ${TESTVMOPTS} -XX:+PrintFlagsFinal -version | \
grep TieredCompilation | \
grep -c true`
@@ -177,6 +186,7 @@
echo "client_available=$client_available"
echo "server_available=$server_available"
+echo "tiered_available=$tiered_available"
echo "is_tiered=$is_tiered"
# crash vm in compiler thread with generation replay data and 'small' dump-file
--- a/hotspot/test/compiler/whitebox/ClearMethodStateTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/ClearMethodStateTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
/*
* @test ClearMethodStateTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build ClearMethodStateTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
@@ -59,16 +60,19 @@
WHITE_BOX.clearMethodState(method);
checkCompiled();
WHITE_BOX.clearMethodState(method);
- WHITE_BOX.deoptimizeMethod(method);
+ deoptimize();
checkNotCompiled();
-
+ if (testCase.isOsr) {
+ // part test isn't applicable for OSR test case
+ return;
+ }
if (!TIERED_COMPILATION) {
WHITE_BOX.clearMethodState(method);
compile(COMPILE_THRESHOLD);
checkCompiled();
- WHITE_BOX.deoptimizeMethod(method);
+ deoptimize();
checkNotCompiled();
WHITE_BOX.clearMethodState(method);
--- a/hotspot/test/compiler/whitebox/CompilerWhiteBoxTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/CompilerWhiteBoxTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -44,8 +44,14 @@
protected static int COMP_LEVEL_ANY = -1;
/** {@code CompLevel::CompLevel_simple} -- C1 */
protected static int COMP_LEVEL_SIMPLE = 1;
+ /** {@code CompLevel::CompLevel_limited_profile} -- C1, invocation & backedge counters */
+ protected static int COMP_LEVEL_LIMITED_PROFILE = 2;
+ /** {@code CompLevel::CompLevel_full_profile} -- C1, invocation & backedge counters + mdo */
+ protected static int COMP_LEVEL_FULL_PROFILE = 3;
/** {@code CompLevel::CompLevel_full_optimization} -- C2 or Shark */
protected static int COMP_LEVEL_FULL_OPTIMIZATION = 4;
+ /** Maximal value for CompLeveL */
+ protected static int COMP_LEVEL_MAX = COMP_LEVEL_FULL_OPTIMIZATION;
/** Instance of WhiteBox */
protected static final WhiteBox WHITE_BOX = WhiteBox.getWhiteBox();
@@ -64,6 +70,21 @@
/** Flag for verbose output, true if {@code -Dverbose} specified */
protected static final boolean IS_VERBOSE
= System.getProperty("verbose") != null;
+ /** count of invocation to triger compilation */
+ protected static final int THRESHOLD;
+ /** count of invocation to triger OSR compilation */
+ protected static final long BACKEDGE_THRESHOLD;
+
+ static {
+ if (TIERED_COMPILATION) {
+ THRESHOLD = 150000;
+ BACKEDGE_THRESHOLD = 0xFFFFFFFFL;
+ } else {
+ THRESHOLD = COMPILE_THRESHOLD;
+ BACKEDGE_THRESHOLD = COMPILE_THRESHOLD * Long.parseLong(getVMOption(
+ "OnStackReplacePercentage"));
+ }
+ }
/**
* Returns value of VM option.
@@ -112,7 +133,7 @@
/** tested method */
protected final Executable method;
- private final Callable<Integer> callable;
+ protected final TestCase testCase;
/**
* Constructor.
@@ -123,7 +144,7 @@
Objects.requireNonNull(testCase);
System.out.println("TEST CASE:" + testCase.name());
method = testCase.executable;
- callable = testCase.callable;
+ this.testCase = testCase;
}
/**
@@ -169,12 +190,18 @@
if (WHITE_BOX.isMethodQueuedForCompilation(method)) {
throw new RuntimeException(method + " must not be in queue");
}
- if (WHITE_BOX.isMethodCompiled(method)) {
+ if (WHITE_BOX.isMethodCompiled(method, false)) {
throw new RuntimeException(method + " must be not compiled");
}
- if (WHITE_BOX.getMethodCompilationLevel(method) != 0) {
+ if (WHITE_BOX.getMethodCompilationLevel(method, false) != 0) {
throw new RuntimeException(method + " comp_level must be == 0");
}
+ if (WHITE_BOX.isMethodCompiled(method, true)) {
+ throw new RuntimeException(method + " must be not osr_compiled");
+ }
+ if (WHITE_BOX.getMethodCompilationLevel(method, true) != 0) {
+ throw new RuntimeException(method + " osr_comp_level must be == 0");
+ }
}
/**
@@ -192,12 +219,44 @@
method, System.currentTimeMillis() - start);
return;
}
- if (!WHITE_BOX.isMethodCompiled(method)) {
- throw new RuntimeException(method + " must be compiled");
+ if (!WHITE_BOX.isMethodCompiled(method, testCase.isOsr)) {
+ throw new RuntimeException(method + " must be "
+ + (testCase.isOsr ? "osr_" : "") + "compiled");
+ }
+ if (WHITE_BOX.getMethodCompilationLevel(method, testCase.isOsr) == 0) {
+ throw new RuntimeException(method
+ + (testCase.isOsr ? " osr_" : " ")
+ + "comp_level must be != 0");
+ }
+ }
+
+ protected final void deoptimize() {
+ WHITE_BOX.deoptimizeMethod(method, testCase.isOsr);
+ if (testCase.isOsr) {
+ WHITE_BOX.deoptimizeMethod(method, false);
}
- if (WHITE_BOX.getMethodCompilationLevel(method) == 0) {
- throw new RuntimeException(method + " comp_level must be != 0");
- }
+ }
+
+ protected final int getCompLevel() {
+ return WHITE_BOX.getMethodCompilationLevel(method, testCase.isOsr);
+ }
+
+ protected final boolean isCompilable() {
+ return WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY,
+ testCase.isOsr);
+ }
+
+ protected final boolean isCompilable(int compLevel) {
+ return WHITE_BOX.isMethodCompilable(method, compLevel, testCase.isOsr);
+ }
+
+ protected final void makeNotCompilable() {
+ WHITE_BOX.makeMethodNotCompilable(method, COMP_LEVEL_ANY,
+ testCase.isOsr);
+ }
+
+ protected final void makeNotCompilable(int compLevel) {
+ WHITE_BOX.makeMethodNotCompilable(method, compLevel, testCase.isOsr);
}
/**
@@ -226,12 +285,18 @@
protected final void printInfo() {
System.out.printf("%n%s:%n", method);
System.out.printf("\tcompilable:\t%b%n",
- WHITE_BOX.isMethodCompilable(method));
+ WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY, false));
System.out.printf("\tcompiled:\t%b%n",
- WHITE_BOX.isMethodCompiled(method));
+ WHITE_BOX.isMethodCompiled(method, false));
System.out.printf("\tcomp_level:\t%d%n",
- WHITE_BOX.getMethodCompilationLevel(method));
- System.out.printf("\tin_queue:\t%b%n",
+ WHITE_BOX.getMethodCompilationLevel(method, false));
+ System.out.printf("\tosr_compilable:\t%b%n",
+ WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY, true));
+ System.out.printf("\tosr_compiled:\t%b%n",
+ WHITE_BOX.isMethodCompiled(method, true));
+ System.out.printf("\tosr_comp_level:\t%d%n",
+ WHITE_BOX.getMethodCompilationLevel(method, true));
+ System.out.printf("\tin_queue:\t%b%n",
WHITE_BOX.isMethodQueuedForCompilation(method));
System.out.printf("compile_queues_size:\t%d%n%n",
WHITE_BOX.getCompileQueuesSize());
@@ -244,18 +309,22 @@
/**
* Tries to trigger compilation of {@linkplain #method} by call
- * {@linkplain #callable} enough times.
+ * {@linkplain #testCase.callable} enough times.
*
* @return accumulated result
* @see #compile(int)
*/
protected final int compile() {
- return compile(Math.max(COMPILE_THRESHOLD, 150000));
+ if (testCase.isOsr) {
+ return compile(1);
+ } else {
+ return compile(THRESHOLD);
+ }
}
/**
* Tries to trigger compilation of {@linkplain #method} by call
- * {@linkplain #callable} specified times.
+ * {@linkplain #testCase.callable} specified times.
*
* @param count invocation count
* @return accumulated result
@@ -265,7 +334,7 @@
Integer tmp;
for (int i = 0; i < count; ++i) {
try {
- tmp = callable.call();
+ tmp = testCase.callable.call();
} catch (Exception e) {
tmp = null;
}
@@ -283,23 +352,36 @@
*/
enum TestCase {
/** constructor test case */
- CONSTRUCTOR_TEST(Helper.CONSTRUCTOR, Helper.CONSTRUCTOR_CALLABLE),
+ CONSTRUCTOR_TEST(Helper.CONSTRUCTOR, Helper.CONSTRUCTOR_CALLABLE, false),
/** method test case */
- METOD_TEST(Helper.METHOD, Helper.METHOD_CALLABLE),
+ METOD_TEST(Helper.METHOD, Helper.METHOD_CALLABLE, false),
/** static method test case */
- STATIC_TEST(Helper.STATIC, Helper.STATIC_CALLABLE);
+ STATIC_TEST(Helper.STATIC, Helper.STATIC_CALLABLE, false),
+
+ /** OSR constructor test case */
+ OSR_CONSTRUCTOR_TEST(Helper.OSR_CONSTRUCTOR,
+ Helper.OSR_CONSTRUCTOR_CALLABLE, true),
+ /** OSR method test case */
+ OSR_METOD_TEST(Helper.OSR_METHOD, Helper.OSR_METHOD_CALLABLE, true),
+ /** OSR static method test case */
+ OSR_STATIC_TEST(Helper.OSR_STATIC, Helper.OSR_STATIC_CALLABLE, true);
/** tested method */
final Executable executable;
/** object to invoke {@linkplain #executable} */
final Callable<Integer> callable;
+ /** flag for OSR test case */
+ final boolean isOsr;
- private TestCase(Executable executable, Callable<Integer> callable) {
+ private TestCase(Executable executable, Callable<Integer> callable,
+ boolean isOsr) {
this.executable = executable;
this.callable = callable;
+ this.isOsr = isOsr;
}
private static class Helper {
+
private static final Callable<Integer> CONSTRUCTOR_CALLABLE
= new Callable<Integer>() {
@Override
@@ -326,9 +408,39 @@
}
};
+ private static final Callable<Integer> OSR_CONSTRUCTOR_CALLABLE
+ = new Callable<Integer>() {
+ @Override
+ public Integer call() throws Exception {
+ return new Helper(null).hashCode();
+ }
+ };
+
+ private static final Callable<Integer> OSR_METHOD_CALLABLE
+ = new Callable<Integer>() {
+ private final Helper helper = new Helper();
+
+ @Override
+ public Integer call() throws Exception {
+ return helper.osrMethod();
+ }
+ };
+
+ private static final Callable<Integer> OSR_STATIC_CALLABLE
+ = new Callable<Integer>() {
+ @Override
+ public Integer call() throws Exception {
+ return osrStaticMethod();
+ }
+ };
+
+
private static final Constructor CONSTRUCTOR;
+ private static final Constructor OSR_CONSTRUCTOR;
private static final Method METHOD;
private static final Method STATIC;
+ private static final Method OSR_METHOD;
+ private static final Method OSR_STATIC;
static {
try {
@@ -338,17 +450,26 @@
"exception on getting method Helper.<init>(int)", e);
}
try {
- METHOD = Helper.class.getDeclaredMethod("method");
+ OSR_CONSTRUCTOR = Helper.class.getDeclaredConstructor(
+ Object.class);
} catch (NoSuchMethodException | SecurityException e) {
throw new RuntimeException(
- "exception on getting method Helper.method()", e);
+ "exception on getting method Helper.<init>(Object)", e);
}
+ METHOD = getMethod("method");
+ STATIC = getMethod("staticMethod");
+ OSR_METHOD = getMethod("osrMethod");
+ OSR_STATIC = getMethod("osrStaticMethod");
+ }
+
+ private static Method getMethod(String name) {
try {
- STATIC = Helper.class.getDeclaredMethod("staticMethod");
+ return Helper.class.getDeclaredMethod(name);
} catch (NoSuchMethodException | SecurityException e) {
throw new RuntimeException(
- "exception on getting method Helper.staticMethod()", e);
+ "exception on getting method Helper." + name, e);
}
+
}
private static int staticMethod() {
@@ -359,12 +480,39 @@
return 42;
}
+ private static int osrStaticMethod() {
+ int result = 0;
+ for (long i = 0; i < CompilerWhiteBoxTest.BACKEDGE_THRESHOLD; ++i) {
+ result += staticMethod();
+ }
+ return result;
+ }
+
+ private int osrMethod() {
+ int result = 0;
+ for (long i = 0; i < CompilerWhiteBoxTest.BACKEDGE_THRESHOLD; ++i) {
+ result += method();
+ }
+ return result;
+ }
+
private final int x;
+ // for method and OSR method test case
public Helper() {
x = 0;
}
+ // for OSR constructor test case
+ private Helper(Object o) {
+ int result = 0;
+ for (long i = 0; i < CompilerWhiteBoxTest.BACKEDGE_THRESHOLD; ++i) {
+ result += method();
+ }
+ x = result;
+ }
+
+ // for constructor test case
private Helper(int x) {
this.x = x;
}
--- a/hotspot/test/compiler/whitebox/DeoptimizeAllTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/DeoptimizeAllTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
/*
* @test DeoptimizeAllTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build DeoptimizeAllTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
--- a/hotspot/test/compiler/whitebox/DeoptimizeMethodTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/DeoptimizeMethodTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
/*
* @test DeoptimizeMethodTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build DeoptimizeMethodTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
@@ -54,7 +55,7 @@
protected void test() throws Exception {
compile();
checkCompiled();
- WHITE_BOX.deoptimizeMethod(method);
+ deoptimize();
checkNotCompiled();
}
}
--- a/hotspot/test/compiler/whitebox/EnqueueMethodForCompilationTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/EnqueueMethodForCompilationTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,10 +23,11 @@
/*
* @test EnqueueMethodForCompilationTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build EnqueueMethodForCompilationTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
- * @run main/othervm -Xbootclasspath/a:. -Xmixed -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* EnqueueMethodForCompilationTest
+ * @run main/othervm/timeout=600 -Xbootclasspath/a:. -Xmixed -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* EnqueueMethodForCompilationTest
* @summary testing of WB::enqueueMethodForCompilation()
* @author igor.ignatyev@oracle.com
*/
@@ -50,7 +51,7 @@
// method can not be compiled on level 'none'
WHITE_BOX.enqueueMethodForCompilation(method, COMP_LEVEL_NONE);
- if (WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_NONE)) {
+ if (isCompilable(COMP_LEVEL_NONE)) {
throw new RuntimeException(method
+ " is compilable at level COMP_LEVEL_NONE");
}
@@ -60,27 +61,29 @@
WHITE_BOX.enqueueMethodForCompilation(method, COMP_LEVEL_ANY);
checkNotCompiled();
- WHITE_BOX.enqueueMethodForCompilation(method, 5);
- if (!WHITE_BOX.isMethodCompilable(method, 5)) {
- checkNotCompiled();
- compile();
- checkCompiled();
- } else {
- checkCompiled();
- }
-
- int compLevel = WHITE_BOX.getMethodCompilationLevel(method);
- WHITE_BOX.deoptimizeMethod(method);
- checkNotCompiled();
-
- WHITE_BOX.enqueueMethodForCompilation(method, compLevel);
- checkCompiled();
- WHITE_BOX.deoptimizeMethod(method);
+ // not existing comp level
+ WHITE_BOX.enqueueMethodForCompilation(method, 42);
checkNotCompiled();
compile();
checkCompiled();
- WHITE_BOX.deoptimizeMethod(method);
+
+ int compLevel = getCompLevel();
+ int bci = WHITE_BOX.getMethodEntryBci(method);
+ System.out.println("bci = " + bci);
+ printInfo();
+ deoptimize();
+ printInfo();
+ checkNotCompiled();
+ printInfo();
+ WHITE_BOX.enqueueMethodForCompilation(method, compLevel, bci);
+ checkCompiled();
+ deoptimize();
+ checkNotCompiled();
+
+ compile();
+ checkCompiled();
+ deoptimize();
checkNotCompiled();
}
}
--- a/hotspot/test/compiler/whitebox/IsMethodCompilableTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/IsMethodCompilableTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,11 +23,11 @@
/*
* @test IsMethodCompilableTest
- * @bug 8007270
+ * @bug 8007270 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build IsMethodCompilableTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
- * @run main/othervm/timeout=600 -Xbootclasspath/a:. -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* IsMethodCompilableTest
+ * @run main/othervm/timeout=2400 -Xbootclasspath/a:. -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* IsMethodCompilableTest
* @summary testing of WB::isMethodCompilable()
* @author igor.ignatyev@oracle.com
*/
@@ -68,7 +68,7 @@
*/
@Override
protected void test() throws Exception {
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
throw new RuntimeException(method + " must be compilable");
}
System.out.println("PerMethodRecompilationCutoff = "
@@ -83,7 +83,8 @@
for (long i = 0L, n = PER_METHOD_RECOMPILATION_CUTOFF - 1; i < n; ++i) {
compileAndDeoptimize();
}
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!testCase.isOsr && !isCompilable()) {
+ // in osr test case count of deopt maybe more than iterations
throw new RuntimeException(method + " is not compilable after "
+ (PER_METHOD_RECOMPILATION_CUTOFF - 1) + " iterations");
}
@@ -92,15 +93,16 @@
// deoptimize 'PerMethodRecompilationCutoff' + 1 times
long i;
for (i = 0L; i < PER_METHOD_RECOMPILATION_CUTOFF
- && WHITE_BOX.isMethodCompilable(method); ++i) {
+ && isCompilable(); ++i) {
compileAndDeoptimize();
}
- if (i != PER_METHOD_RECOMPILATION_CUTOFF) {
+ if (!testCase.isOsr && i != PER_METHOD_RECOMPILATION_CUTOFF) {
+ // in osr test case count of deopt maybe more than iterations
throw new RuntimeException(method + " is not compilable after "
+ i + " iterations, but must only after "
+ PER_METHOD_RECOMPILATION_CUTOFF);
}
- if (WHITE_BOX.isMethodCompilable(method)) {
+ if (isCompilable()) {
throw new RuntimeException(method + " is still compilable after "
+ PER_METHOD_RECOMPILATION_CUTOFF + " iterations");
}
@@ -109,7 +111,7 @@
// WB.clearMethodState() must reset no-compilable flags
WHITE_BOX.clearMethodState(method);
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
throw new RuntimeException(method
+ " is not compilable after clearMethodState()");
}
@@ -120,6 +122,6 @@
private void compileAndDeoptimize() throws Exception {
compile();
waitBackgroundCompilation();
- WHITE_BOX.deoptimizeMethod(method);
+ deoptimize();
}
}
--- a/hotspot/test/compiler/whitebox/MakeMethodNotCompilableTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/MakeMethodNotCompilableTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,16 +23,16 @@
/*
* @test MakeMethodNotCompilableTest
- * @bug 8012322
+ * @bug 8012322 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build MakeMethodNotCompilableTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
- * @run main/othervm -Xbootclasspath/a:. -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* MakeMethodNotCompilableTest
+ * @run main/othervm/timeout=2400 -Xbootclasspath/a:. -XX:+UnlockDiagnosticVMOptions -XX:+WhiteBoxAPI -XX:CompileCommand=compileonly,TestCase$Helper::* MakeMethodNotCompilableTest
* @summary testing of WB::makeMethodNotCompilable()
* @author igor.ignatyev@oracle.com
*/
public class MakeMethodNotCompilableTest extends CompilerWhiteBoxTest {
-
+ private int bci;
public static void main(String[] args) throws Exception {
if (args.length == 0) {
for (TestCase test : TestCase.values()) {
@@ -63,25 +63,27 @@
@Override
protected void test() throws Exception {
checkNotCompiled();
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
throw new RuntimeException(method + " must be compilable");
}
+ bci = getBci();
+
if (TIERED_COMPILATION) {
final int tierLimit = TIERED_STOP_AT_LEVEL + 1;
for (int testedTier = 1; testedTier < tierLimit; ++testedTier) {
testTier(testedTier);
}
for (int testedTier = 1; testedTier < tierLimit; ++testedTier) {
- WHITE_BOX.makeMethodNotCompilable(method, testedTier);
- if (WHITE_BOX.isMethodCompilable(method, testedTier)) {
+ makeNotCompilable(testedTier);
+ if (isCompilable(testedTier)) {
throw new RuntimeException(method
+ " must be not compilable at level" + testedTier);
}
- WHITE_BOX.enqueueMethodForCompilation(method, testedTier);
+ WHITE_BOX.enqueueMethodForCompilation(method, testedTier, bci);
checkNotCompiled();
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
System.out.println(method
+ " is not compilable after level " + testedTier);
}
@@ -89,15 +91,20 @@
} else {
compile();
checkCompiled();
- int compLevel = WHITE_BOX.getMethodCompilationLevel(method);
- WHITE_BOX.deoptimizeMethod(method);
- WHITE_BOX.makeMethodNotCompilable(method, compLevel);
- if (WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY)) {
+ int compLevel = getCompLevel();
+ deoptimize();
+ makeNotCompilable(compLevel);
+ if (isCompilable(COMP_LEVEL_ANY)) {
throw new RuntimeException(method
+ " must be not compilable at CompLevel::CompLevel_any,"
+ " after it is not compilable at " + compLevel);
}
+
WHITE_BOX.clearMethodState(method);
+ if (!isCompilable()) {
+ throw new RuntimeException(method
+ + " is not compilable after clearMethodState()");
+ }
// nocompilable at opposite level must make no sense
int oppositeLevel;
@@ -106,16 +113,16 @@
} else {
oppositeLevel = COMP_LEVEL_SIMPLE;
}
- WHITE_BOX.makeMethodNotCompilable(method, oppositeLevel);
+ makeNotCompilable(oppositeLevel);
- if (!WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY)) {
+ if (!isCompilable(COMP_LEVEL_ANY)) {
throw new RuntimeException(method
+ " must be compilable at CompLevel::CompLevel_any,"
+ " even it is not compilable at opposite level ["
+ compLevel + "]");
}
- if (!WHITE_BOX.isMethodCompilable(method, compLevel)) {
+ if (!isCompilable(compLevel)) {
throw new RuntimeException(method
+ " must be compilable at level " + compLevel
+ ", even it is not compilable at opposite level ["
@@ -126,24 +133,24 @@
// clearing after tiered/non-tiered tests
// WB.clearMethodState() must reset no-compilable flags
WHITE_BOX.clearMethodState(method);
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
throw new RuntimeException(method
+ " is not compilable after clearMethodState()");
}
- WHITE_BOX.makeMethodNotCompilable(method);
- if (WHITE_BOX.isMethodCompilable(method)) {
+ makeNotCompilable();
+ if (isCompilable()) {
throw new RuntimeException(method + " must be not compilable");
}
compile();
checkNotCompiled();
- if (WHITE_BOX.isMethodCompilable(method)) {
+ if (isCompilable()) {
throw new RuntimeException(method + " must be not compilable");
}
// WB.clearMethodState() must reset no-compilable flags
WHITE_BOX.clearMethodState(method);
- if (!WHITE_BOX.isMethodCompilable(method)) {
+ if (!isCompilable()) {
throw new RuntimeException(method
+ " is not compilable after clearMethodState()");
}
@@ -153,24 +160,23 @@
// separately tests each tier
private void testTier(int testedTier) {
- if (!WHITE_BOX.isMethodCompilable(method, testedTier)) {
+ if (!isCompilable(testedTier)) {
throw new RuntimeException(method
+ " is not compilable on start");
}
- WHITE_BOX.makeMethodNotCompilable(method, testedTier);
+ makeNotCompilable(testedTier);
// tests for all other tiers
for (int anotherTier = 1, tierLimit = TIERED_STOP_AT_LEVEL + 1;
anotherTier < tierLimit; ++anotherTier) {
- boolean isCompilable = WHITE_BOX.isMethodCompilable(method,
- anotherTier);
+ boolean isCompilable = isCompilable(anotherTier);
if (sameCompile(testedTier, anotherTier)) {
if (isCompilable) {
throw new RuntimeException(method
+ " must be not compilable at level " + anotherTier
+ ", if it is not compilable at " + testedTier);
}
- WHITE_BOX.enqueueMethodForCompilation(method, anotherTier);
+ WHITE_BOX.enqueueMethodForCompilation(method, anotherTier, bci);
checkNotCompiled();
} else {
if (!isCompilable) {
@@ -179,12 +185,12 @@
+ ", even if it is not compilable at "
+ testedTier);
}
- WHITE_BOX.enqueueMethodForCompilation(method, anotherTier);
+ WHITE_BOX.enqueueMethodForCompilation(method, anotherTier, bci);
checkCompiled();
- WHITE_BOX.deoptimizeMethod(method);
+ deoptimize();
}
- if (!WHITE_BOX.isMethodCompilable(method, COMP_LEVEL_ANY)) {
+ if (!isCompilable(COMP_LEVEL_ANY)) {
throw new RuntimeException(method
+ " must be compilable at 'CompLevel::CompLevel_any'"
+ ", if it is not compilable only at " + testedTier);
@@ -193,7 +199,7 @@
// clear state after test
WHITE_BOX.clearMethodState(method);
- if (!WHITE_BOX.isMethodCompilable(method, testedTier)) {
+ if (!isCompilable(testedTier)) {
throw new RuntimeException(method
+ " is not compilable after clearMethodState()");
}
@@ -211,4 +217,13 @@
}
return false;
}
+
+ private int getBci() {
+ compile();
+ checkCompiled();
+ int result = WHITE_BOX.getMethodEntryBci(method);
+ deoptimize();
+ WHITE_BOX.clearMethodState(method);
+ return result;
+ }
}
--- a/hotspot/test/compiler/whitebox/SetDontInlineMethodTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/SetDontInlineMethodTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
/*
* @test SetDontInlineMethodTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build SetDontInlineMethodTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
--- a/hotspot/test/compiler/whitebox/SetForceInlineMethodTest.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/compiler/whitebox/SetForceInlineMethodTest.java Mon Aug 19 09:33:29 2013 +0200
@@ -23,6 +23,7 @@
/*
* @test SetForceInlineMethodTest
+ * @bug 8006683 8007288 8022832
* @library /testlibrary /testlibrary/whitebox
* @build SetForceInlineMethodTest
* @run main ClassFileInstaller sun.hotspot.WhiteBox
--- a/hotspot/test/testlibrary/whitebox/sun/hotspot/WhiteBox.java Fri Aug 16 04:24:07 2013 -0700
+++ b/hotspot/test/testlibrary/whitebox/sun/hotspot/WhiteBox.java Mon Aug 19 09:33:29 2013 +0200
@@ -93,23 +93,45 @@
// Compiler
public native void deoptimizeAll();
- public native boolean isMethodCompiled(Executable method);
- public boolean isMethodCompilable(Executable method) {
- return isMethodCompilable(method, -1 /*any*/);
+ public boolean isMethodCompiled(Executable method) {
+ return isMethodCompiled(method, false /*not osr*/);
}
- public native boolean isMethodCompilable(Executable method, int compLevel);
+ public native boolean isMethodCompiled(Executable method, boolean isOsr);
+ public boolean isMethodCompilable(Executable method) {
+ return isMethodCompilable(method, -1 /*any*/);
+ }
+ public boolean isMethodCompilable(Executable method, int compLevel) {
+ return isMethodCompilable(method, compLevel, false /*not osr*/);
+ }
+ public native boolean isMethodCompilable(Executable method, int compLevel, boolean isOsr);
public native boolean isMethodQueuedForCompilation(Executable method);
- public native int deoptimizeMethod(Executable method);
- public void makeMethodNotCompilable(Executable method) {
- makeMethodNotCompilable(method, -1 /*any*/);
+ public int deoptimizeMethod(Executable method) {
+ return deoptimizeMethod(method, false /*not osr*/);
+ }
+ public native int deoptimizeMethod(Executable method, boolean isOsr);
+ public void makeMethodNotCompilable(Executable method) {
+ makeMethodNotCompilable(method, -1 /*any*/);
+ }
+ public void makeMethodNotCompilable(Executable method, int compLevel) {
+ makeMethodNotCompilable(method, compLevel, false /*not osr*/);
+ }
+ public native void makeMethodNotCompilable(Executable method, int compLevel, boolean isOsr);
+ public int getMethodCompilationLevel(Executable method) {
+ return getMethodCompilationLevel(method, false /*not ost*/);
}
- public native void makeMethodNotCompilable(Executable method, int compLevel);
- public native int getMethodCompilationLevel(Executable method);
+ public native int getMethodCompilationLevel(Executable method, boolean isOsr);
public native boolean testSetDontInlineMethod(Executable method, boolean value);
- public native int getCompileQueuesSize();
+ public int getCompileQueuesSize() {
+ return getCompileQueueSize(-1 /*any*/);
+ }
+ public native int getCompileQueueSize(int compLevel);
public native boolean testSetForceInlineMethod(Executable method, boolean value);
- public native boolean enqueueMethodForCompilation(Executable method, int compLevel);
+ public boolean enqueueMethodForCompilation(Executable method, int compLevel) {
+ return enqueueMethodForCompilation(method, compLevel, -1 /*InvocationEntryBci*/);
+ }
+ public native boolean enqueueMethodForCompilation(Executable method, int compLevel, int entry_bci);
public native void clearMethodState(Executable method);
+ public native int getMethodEntryBci(Executable method);
// Intered strings
public native boolean isInStringTable(String str);