--- a/.hgignore Wed Jul 05 18:22:17 2017 +0200
+++ b/.hgignore Wed Jul 05 18:22:52 2017 +0200
@@ -1,6 +1,7 @@
^build/
^dist/
-/nbproject/private/
+nbproject/private/
^webrev
^.hgtip
+^.bridge2
.DS_Store
--- a/.hgtags-top-repo Wed Jul 05 18:22:17 2017 +0200
+++ b/.hgtags-top-repo Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
febd7ff5280067ca482faaeb9418ae88764c1a35 jdk8-b53
c1a277c6022affbc6855bdfb039511e73fbe2395 jdk8-b54
b85b44cced2406792cfb9baab1377ff03e7001d8 jdk8-b55
+76844579fa4b30929731115b237e477181a82394 jdk8-b56
--- a/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -1,5 +1,5 @@
#
-# Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -23,6 +23,16 @@
# questions.
#
+# If NEWBUILD is defined, use the new build-infra Makefiles and configure.
+# See NewMakefile.gmk for more information.
+
+ifeq ($(NEWBUILD),true)
+
+ # The new top level Makefile
+ include NewMakefile.gmk
+
+else # Original Makefile logic
+
BUILD_PARENT_DIRECTORY=.
# Basename of any originally supplied ALT_OUTPUTDIR directory
@@ -557,3 +567,5 @@
# Force target
FRC:
+endif # Original Makefile logic
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/NewMakefile.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,211 @@
+#
+# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# Utilities used in this Makefile
+BASENAME=basename
+CAT=cat
+CD=cd
+CMP=cmp
+CP=cp
+ECHO=echo
+MKDIR=mkdir
+PWD=pwd
+SH=sh
+ifeq ($(PLATFORM),windows)
+ ZIP=zip
+else
+ # store symbolic links as the link
+ ZIP=zip -y
+endif
+# Insure we have a path that looks like it came from pwd
+# (This is mostly for Windows sake and drive letters)
+define UnixPath # path
+$(shell (cd "$1" && $(PWD)))
+endef
+
+# Current root directory
+CURRENT_DIRECTORY := $(shell $(PWD))
+
+# Build directory root
+BUILD_DIR_ROOT = $(CURRENT_DIRECTORY)/build
+
+# All configured Makefiles to run
+ALL_MAKEFILES = $(wildcard $(BUILD_DIR_ROOT)/*-*/Makefile)
+
+# All bundles to create
+ALL_IMAGE_DIRS = $(wildcard $(BUILD_DIR_ROOT)/*-*/images/*-image)
+
+# Build all the standard 'all', 'images', and 'clean' targets
+all images clean: checks
+ @if [ "$(ALL_MAKEFILES)" = "" ] ; then \
+ $(ECHO) "ERROR: No configurations to build"; exit 1; \
+ fi
+ @for bdir in $(dir $(ALL_MAKEFILES)) ; do \
+ $(ECHO) "$(CD) $${bdir} && $(MAKE) $(EXTRA_MAKE_ARGS) $@" ; \
+ $(CD) $${bdir} && $(MAKE) $(EXTRA_MAKE_ARGS) $@ ; \
+ done
+
+# Bundle creation
+bundles:
+ @if [ "$(ALL_IMAGE_DIRS)" = "" ] ; then \
+ $(ECHO) "ERROR: No images to bundle"; exit 1; \
+ fi
+ @for i in $(ALL_IMAGE_DIRS) ; do \
+ $(MKDIR) -p $${i}/../../bundles && \
+ $(RM) $${i}/../../bundles/`$(BASENAME) $${i}`.zip && \
+ $(ECHO) "$(CD) $${i} && $(ZIP) -q -r ../../bundles/`$(BASENAME) $${i}`.zip ." && \
+ $(CD) $${i} && $(ZIP) -q -r ../../bundles/`$(BASENAME) $${i}`.zip . ; \
+ done
+
+# Clobber all the built files
+clobber::
+ $(RM) -r $(BUILD_DIR_ROOT)
+
+# Make various checks to insure the build will be successful
+# Possibilities:
+# * Check that if any closed repo is provided, they all must be.
+# * Check that all open repos exist, at least until we are ready for some
+# kind of partial build.
+checks:
+ @$(ECHO) "No checks yet"
+
+# Keep track of phony targets
+PHONY_LIST += all images clean clobber checks
+
+###########################################################################
+# To help in adoption of the new configure&&make build process, a bridge
+# build will use the old settings to run configure and do the build.
+
+# Build with the configure bridge
+bridgeBuild: bridge2configure images
+
+# Bridge from old Makefile ALT settings to configure options
+bridge2configure: .bridge2configureOpts
+ $(CD) common/makefiles && sh ../autoconf/configure $(strip $(shell $(CAT) $<))
+
+# Create a file with configure options created from old Makefile mechanisms.
+.bridge2configureOpts: .bridge2configureOptsLatest
+ $(RM) $@
+ $(CP) $< $@
+
+# In case make was invoked from a specific path
+_MAKE_COMMAND_PATH:=$(firstword $(MAKE))
+ifneq ($(dir $(_MAKE_COMMAND_PATH)),./)
+ # This could be removed someday if JPRT was fixed and we could assume that
+ # the path to make was always in PATH.
+ MAKE_BINDIR:=$(call UnixPath,$(dir $(_MAKE_COMMAND_PATH)))
+ NEWPATH:=$(MAKE_BINDIR):${PATH}
+ PATH:=$(NEWPATH)
+ export PATH
+ MAKE_COMMAND=$(MAKE_BINDIR)/$(notdir $(_MAKE_COMMAND_PATH))
+else
+ MAKE_COMMAND=$(_MAKE_COMMAND_PATH)
+endif
+
+# Use this file to only change when obvious things have changed
+.bridge2configureOptsLatest: FRC
+ $(RM) $@.tmp
+ @$(ECHO) " MAKE=$(MAKE_COMMAND) " >> $@.tmp
+ @$(ECHO) " --with-debug-level=$(if $(DEBUG_LEVEL),$(DEBUG_LEVEL),release) " >> $@.tmp
+ifdef ARCH_DATA_MODEL
+ @$(ECHO) " --with-target-bits=$(ARCH_DATA_MODEL) " >> $@.tmp
+endif
+ifdef ALT_PARALLEL_COMPILE_JOBS
+ @$(ECHO) " --with-num-cores=$(ALT_PARALLEL_COMPILE_JOBS) " >> $@.tmp
+endif
+ifdef ALT_BOOTDIR
+ @$(ECHO) " --with-boot-jdk=$(call UnixPath,$(ALT_BOOTDIR)) " >> $@.tmp
+endif
+ifdef ALT_CUPS_HEADERS_PATH
+ @$(ECHO) " --with-cups-include=$(call UnixPath,$(ALT_CUPS_HEADERS_PATH)) " >> $@.tmp
+endif
+ifdef ALT_FREETYPE_HEADERS_PATH
+ @$(ECHO) " --with-freetype=$(call UnixPath,$(ALT_FREETYPE_HEADERS_PATH)/..) " >> $@.tmp
+endif
+ @if [ -f $@ ] ; then \
+ if ! $(CMP) $@ $@.tmp > /dev/null ; then \
+ $(CP) $@.tmp $@ ; \
+ fi ; \
+ else \
+ $(CP) $@.tmp $@ ; \
+ fi
+ $(RM) $@.tmp
+
+# Clobber all the built files
+clobber:: bridge2clobber
+bridge2clobber::
+ $(RM) .bridge2*
+
+# Keep track of phony targets
+PHONY_LIST += bridge2configure bridgeBuild bridge2clobber
+
+###########################################################################
+# Javadocs
+#
+
+javadocs:
+ cd common/makefiles && $(MAKE) -f MakefileJavadoc.gmk
+
+# Keep track of phony targets
+PHONY_LIST += javadocs
+
+###########################################################################
+# JPRT targets
+
+ifndef JPRT_ARCHIVE_BUNDLE
+ JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/j2sdk-image.zip
+endif
+
+jprt_build_product: DEBUG_LEVEL=release
+jprt_build_product: BUILD_DIRNAME=*-release
+jprt_build_product: jprt_build_generic
+
+jprt_build_fastdebug: DEBUG_LEVEL=fastdebug
+jprt_build_fastdebug: BUILD_DIRNAME=*-fastdebug
+jprt_build_fastdebug: jprt_build_generic
+
+jprt_build_debug: DEBUG_LEVEL=slowdebug
+jprt_build_debug: BUILD_DIRNAME=*-debug
+jprt_build_debug: jprt_build_generic
+
+jprt_build_generic: EXTRA_MAKE_ARGS=LOG=nofile,info
+jprt_build_generic: $(JPRT_ARCHIVE_BUNDLE)
+
+$(JPRT_ARCHIVE_BUNDLE): bridgeBuild bundles
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(CP) $(BUILD_DIR_ROOT)/$(BUILD_DIRNAME)/bundles/j2sdk-image.zip $@
+
+# Keep track of phony targets
+PHONY_LIST += jprt_build_product jprt_build_fastdebug jprt_build_debug \
+ jprt_build_generic
+
+###########################################################################
+# Phony targets
+.PHONY: $(PHONY_LIST)
+
+# Force target
+FRC:
+
--- a/common/autoconf/autogen.sh Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/autogen.sh Wed Jul 05 18:22:52 2017 +0200
@@ -23,18 +23,38 @@
#
script_dir=`dirname $0`
-closed_script_dir="$script_dir/../../jdk/make/closed/autoconf"
# Create a timestamp as seconds since epoch
-TIMESTAMP=`date +%s`
+if test "x`uname -s`" = "xSunOS"; then
+ # date +%s is not available on Solaris, use this workaround
+ # from http://solarisjedi.blogspot.co.uk/2006/06/solaris-date-command-and-epoch-time.html
+ TIMESTAMP=`/usr/bin/truss /usr/bin/date 2>&1 | nawk -F= '/^time\(\)/ {gsub(/ /,"",$2);print $2}'`
+ # On Solaris /bin/sh doesn't support test -e but /usr/bin/test does.
+ TEST=`which test`
+else
+ TIMESTAMP=`date +%s`
+ TEST="test"
+fi
+if $TEST "$CUSTOM_CONFIG_DIR" = ""; then
+ custom_script_dir="$script_dir/../../jdk/make/closed/autoconf"
+else
+ custom_script_dir=$CUSTOM_CONFIG_DIR
+fi
+
+custom_hook=$custom_script_dir/custom-hook.m4
+
+echo Generating generated-configure.sh
cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | autoconf -W all -I$script_dir - > $script_dir/generated-configure.sh
rm -rf autom4te.cache
-if test -e $closed_script_dir/closed-hook.m4; then
- # We have closed sources available; also generate configure script
- # with closed hooks compiled in.
+if $TEST -e $custom_hook; then
+ echo Generating custom generated-configure.sh
+ # We have custom sources available; also generate configure script
+ # with custom hooks compiled in.
cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | \
- sed -e "s|AC_DEFUN_ONCE(\[CLOSED_HOOK\])|m4_include([$closed_script_dir/closed-hook.m4])|" | autoconf -W all -I$script_dir - > $closed_script_dir/generated-configure.sh
+ sed -e "s|AC_DEFUN_ONCE(\[CUSTOM_HOOK\])|m4_include([$custom_hook])|" | autoconf -W all -I$script_dir - > $custom_script_dir/generated-configure.sh
rm -rf autom4te.cache
+else
+ echo No custom hook found: $custom_hook
fi
--- a/common/autoconf/basics.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/basics.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -34,7 +34,7 @@
fi
])
-AC_DEFUN([WHICHCMD],
+AC_DEFUN([SET_FULL_PATH],
[
# Translate "gcc -E" into "`which gcc` -E" ie
# extract the full path to the binary and at the
@@ -46,7 +46,7 @@
cdr="${tmp#* }"
# On windows we want paths without spaces.
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- WHICHCMD_SPACESAFE(car)
+ SET_FULL_PATH_SPACESAFE(car)
else
# "which" is not portable, but is used here
# because we know that the command exists!
@@ -66,15 +66,19 @@
HAS_SPACE=`echo "[$]$1" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
$1=`$CYGPATH -s -m -a "[$]$1"`
- $1=`$CYGPATH -u "[$]$1"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ $1=`$ECHO "[$]$1" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ $1=`$CYGPATH -u "[$]$1"`
else
AC_MSG_ERROR([You cannot have spaces in $2! "[$]$1"])
fi
fi
])
-AC_DEFUN([WHICHCMD_SPACESAFE],
+AC_DEFUN([SET_FULL_PATH_SPACESAFE],
[
# Translate long cygdrive or C:\sdfsf path
# into a short mixed mode path that has no
@@ -148,15 +152,16 @@
AC_SUBST(CONFIGURE_COMMAND_LINE)
DATE_WHEN_CONFIGURED=`LANG=C date`
AC_SUBST(DATE_WHEN_CONFIGURED)
+])
+# Setup basic configuration paths, and platform-specific stuff related to PATHs.
+AC_DEFUN_ONCE([BASIC_SETUP_PATHS],
+[
# Locate the directory of this script.
SCRIPT="[$]0"
-REMOVE_SYMBOLIC_LINKS(SCRIPT)
+REMOVE_SYMBOLIC_LINKS(SCRIPT)
AUTOCONF_DIR=`dirname [$]0`
-])
-AC_DEFUN_ONCE([BASIC_SETUP_PATHS],
-[
# Where is the source? It is located two levels above the configure script.
CURDIR="$PWD"
cd "$AUTOCONF_DIR/../.."
@@ -172,18 +177,12 @@
SPACESAFE(SRC_ROOT,[the path to the source root])
SPACESAFE(CURDIR,[the path to the current directory])
-])
-AC_DEFUN_ONCE([BASIC_SETUP_SEARCHPATH],
-[
if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
# Add extra search paths on solaris for utilities like ar and as etc...
PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"
fi
-])
-AC_DEFUN_ONCE([BASIC_SETUP_PATH_SEP],
-[
# For cygwin we need cygpath first, since it is used everywhere.
AC_PATH_PROG(CYGPATH, cygpath)
PATH_SEP=":"
@@ -194,6 +193,36 @@
PATH_SEP=";"
fi
AC_SUBST(PATH_SEP)
+
+# You can force the sys-root if the sys-root encoded into the cross compiler tools
+# is not correct.
+AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root],
+ [pass this sys-root to the compilers and linker (useful if the sys-root encoded in
+ the cross compiler tools is incorrect)])])
+
+if test "x$with_sys_root" != x; then
+ SYS_ROOT=$with_sys_root
+else
+ SYS_ROOT=/
+fi
+AC_SUBST(SYS_ROOT)
+
+AC_ARG_WITH([tools-dir], [AS_HELP_STRING([--with-tools-dir],
+ [search this directory for (cross-compiling) compilers and tools])], [TOOLS_DIR=$with_tools_dir])
+
+AC_ARG_WITH([devkit], [AS_HELP_STRING([--with-devkit],
+ [use this directory as base for tools-dir and sys-root (for cross-compiling)])],
+ [
+ if test "x$with_sys_root" != x; then
+ AC_MSG_ERROR([Cannot specify both --with-devkit and --with-sys-root at the same time])
+ fi
+ if test "x$with_tools_dir" != x; then
+ AC_MSG_ERROR([Cannot specify both --with-devkit and --with-tools-dir at the same time])
+ fi
+ TOOLS_DIR=$with_devkit/bin
+ SYS_ROOT=$with_devkit/$host_alias/libc
+ ])
+
])
AC_DEFUN_ONCE([BASIC_SETUP_OUTPUT_DIR],
@@ -236,7 +265,13 @@
AC_CONFIG_HEADERS([$OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in])
# The spec.gmk file contains all variables for the make system.
AC_CONFIG_FILES([$OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in])
-# The spec.sh file contains variables for compare{images|-objects}.sh scrips.
+# The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
+AC_CONFIG_FILES([$OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in])
+# The bootcycle-spec.gmk file contains support for boot cycle builds.
+AC_CONFIG_FILES([$OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in])
+# The compare.sh is used to compare the build output to other builds.
+AC_CONFIG_FILES([$OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in])
+# Spec.sh is currently used by compare-objects.sh
AC_CONFIG_FILES([$OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in])
# The generated Makefile knows where the spec.gmk is and where the source is.
# You can run make from the OUTPUT_ROOT, or from the top-level Makefile
@@ -261,6 +296,79 @@
#%%% Simple tools %%%
+# Check if we have found a usable version of make
+# $1: the path to a potential make binary (or empty)
+# $2: the description on how we found this
+AC_DEFUN([BASIC_CHECK_MAKE_VERSION],
+[
+ MAKE_CANDIDATE="$1"
+ DESCRIPTION="$2"
+ if test "x$MAKE_CANDIDATE" != x; then
+ AC_MSG_NOTICE([Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION])
+ SET_FULL_PATH(MAKE_CANDIDATE)
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ AC_MSG_NOTICE([Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring.])
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[[12346789]]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ AC_MSG_NOTICE([Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring.])
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+])
+
+# Goes looking for a usable version of GNU make.
+AC_DEFUN([BASIC_CHECK_GNU_MAKE],
+[
+ # We need to find a recent version of GNU make. Especially on Solaris, this can be tricky.
+ if test "x$MAKE" != x; then
+ # User has supplied a make, test it.
+ if test ! -f "$MAKE"; then
+ AC_MSG_ERROR([The specified make (by MAKE=$MAKE) is not found.])
+ fi
+ BASIC_CHECK_MAKE_VERSION("$MAKE", [user supplied MAKE=])
+ if test "x$FOUND_MAKE" = x; then
+ AC_MSG_ERROR([The specified make (by MAKE=$MAKE) is not GNU make 3.81 or newer.])
+ fi
+ else
+ # Try our hardest to locate a correct version of GNU make
+ AC_PATH_PROGS(CHECK_GMAKE, gmake)
+ BASIC_CHECK_MAKE_VERSION("$CHECK_GMAKE", [gmake in PATH])
+
+ if test "x$FOUND_MAKE" = x; then
+ AC_PATH_PROGS(CHECK_MAKE, make)
+ BASIC_CHECK_MAKE_VERSION("$CHECK_MAKE", [make in PATH])
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ if test "x$TOOLS_DIR" != x; then
+ # We have a tools-dir, check that as well before giving up.
+ OLD_PATH=$PATH
+ PATH=$TOOLS_DIR:$PATH
+ AC_PATH_PROGS(CHECK_TOOLSDIR_GMAKE, gmake)
+ BASIC_CHECK_MAKE_VERSION("$CHECK_TOOLSDIR_GMAKE", [gmake in tools-dir])
+ if test "x$FOUND_MAKE" = x; then
+ AC_PATH_PROGS(CHECK_TOOLSDIR_MAKE, make)
+ BASIC_CHECK_MAKE_VERSION("$CHECK_TOOLSDIR_MAKE", [make in tools-dir])
+ fi
+ PATH=$OLD_PATH
+ fi
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ AC_MSG_ERROR([Cannot find GNU make 3.81 or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure.])
+ fi
+ fi
+
+ MAKE=$FOUND_MAKE
+ AC_SUBST(MAKE)
+ AC_MSG_NOTICE([Using GNU make 3.81 (or later) at $FOUND_MAKE (version: $MAKE_VERSION_STRING)])
+])
+
AC_DEFUN([BASIC_CHECK_FIND_DELETE],
[
# Test if find supports -delete
@@ -283,10 +391,30 @@
rmdir $DELETEDIR
])
+# Test that variable $1 denoting a program is not empty. If empty, exit with an error.
+# $1: variable to check
+# $2: executable name to print in warning (optional)
AC_DEFUN([CHECK_NONEMPTY],
[
- # Test that variable $1 is not empty.
- if test "" = "[$]$1"; then AC_MSG_ERROR(Could not find translit($1,A-Z,a-z) !); fi
+ if test "x[$]$1" = x; then
+ if test "x$2" = x; then
+ PROG_NAME=translit($1,A-Z,a-z)
+ else
+ PROG_NAME=$2
+ fi
+ AC_MSG_NOTICE([Could not find $PROG_NAME!])
+ AC_MSG_ERROR([Cannot continue])
+ fi
+])
+
+# Does AC_PATH_PROG followed by CHECK_NONEMPTY.
+# Arguments as AC_PATH_PROG:
+# $1: variable to set
+# $2: executable name to look for
+AC_DEFUN([BASIC_REQUIRE_PROG],
+[
+ AC_PATH_PROGS($1, $2)
+ CHECK_NONEMPTY($1, $2)
])
AC_DEFUN_ONCE([BASIC_SETUP_TOOLS],
@@ -295,90 +423,68 @@
# and can be expected to be found in the default PATH. These tools are
# used by configure. Nor are these tools expected to be found in the
# devkit from the builddeps server either, since they are
-# needed to download the devkit.
+# needed to download the devkit.
+
+# First are all the simple required tools.
+BASIC_REQUIRE_PROG(BASENAME, basename)
+BASIC_REQUIRE_PROG(CAT, cat)
+BASIC_REQUIRE_PROG(CHMOD, chmod)
+BASIC_REQUIRE_PROG(CMP, cmp)
+BASIC_REQUIRE_PROG(CP, cp)
+BASIC_REQUIRE_PROG(CPIO, cpio)
+BASIC_REQUIRE_PROG(CUT, cut)
+BASIC_REQUIRE_PROG(DATE, date)
+BASIC_REQUIRE_PROG(DF, df)
+BASIC_REQUIRE_PROG(DIFF, [gdiff diff])
+BASIC_REQUIRE_PROG(ECHO, echo)
+BASIC_REQUIRE_PROG(EXPR, expr)
+BASIC_REQUIRE_PROG(FILE, file)
+BASIC_REQUIRE_PROG(FIND, find)
+BASIC_REQUIRE_PROG(HEAD, head)
+BASIC_REQUIRE_PROG(LN, ln)
+BASIC_REQUIRE_PROG(LS, ls)
+BASIC_REQUIRE_PROG(MKDIR, mkdir)
+BASIC_REQUIRE_PROG(MV, mv)
+BASIC_REQUIRE_PROG(PRINTF, printf)
+BASIC_REQUIRE_PROG(SH, sh)
+BASIC_REQUIRE_PROG(SORT, sort)
+BASIC_REQUIRE_PROG(TAIL, tail)
+BASIC_REQUIRE_PROG(TAR, tar)
+BASIC_REQUIRE_PROG(TEE, tee)
+BASIC_REQUIRE_PROG(TOUCH, touch)
+BASIC_REQUIRE_PROG(TR, tr)
+BASIC_REQUIRE_PROG(UNIQ, uniq)
+BASIC_REQUIRE_PROG(UNZIP, unzip)
+BASIC_REQUIRE_PROG(WC, wc)
+BASIC_REQUIRE_PROG(XARGS, xargs)
+BASIC_REQUIRE_PROG(ZIP, zip)
+
+# Then required tools that require some special treatment.
AC_PROG_AWK
CHECK_NONEMPTY(AWK)
-AC_PATH_PROG(CAT, cat)
-CHECK_NONEMPTY(CAT)
-AC_PATH_PROG(CHMOD, chmod)
-CHECK_NONEMPTY(CHMOD)
-AC_PATH_PROG(CP, cp)
-CHECK_NONEMPTY(CP)
-AC_PATH_PROG(CPIO, cpio)
-CHECK_NONEMPTY(CPIO)
-AC_PATH_PROG(CUT, cut)
-CHECK_NONEMPTY(CUT)
-AC_PATH_PROG(DATE, date)
-CHECK_NONEMPTY(DATE)
-AC_PATH_PROG(DF, df)
-CHECK_NONEMPTY(DF)
-AC_PATH_PROG(DIFF, diff)
-CHECK_NONEMPTY(DIFF)
-# Warning echo is really, really unportable!!!!! Different
-# behaviour in bash and dash and in a lot of other shells!
-# Use printf for serious work!
-AC_PATH_PROG(ECHO, echo)
-CHECK_NONEMPTY(ECHO)
+AC_PROG_GREP
+CHECK_NONEMPTY(GREP)
AC_PROG_EGREP
CHECK_NONEMPTY(EGREP)
AC_PROG_FGREP
CHECK_NONEMPTY(FGREP)
+AC_PROG_SED
+CHECK_NONEMPTY(SED)
-AC_PATH_PROG(FIND, find)
-CHECK_NONEMPTY(FIND)
+AC_PATH_PROGS(NAWK, [nawk gawk awk])
+CHECK_NONEMPTY(NAWK)
+
+BASIC_CHECK_GNU_MAKE
+
+BASIC_REQUIRE_PROG(RM, rm)
+RM="$RM -f"
+
BASIC_CHECK_FIND_DELETE
AC_SUBST(FIND_DELETE)
-AC_PROG_GREP
-CHECK_NONEMPTY(GREP)
-AC_PATH_PROG(HEAD, head)
-CHECK_NONEMPTY(HEAD)
-AC_PATH_PROG(LN, ln)
-CHECK_NONEMPTY(LN)
-AC_PATH_PROG(LS, ls)
-CHECK_NONEMPTY(LS)
-AC_PATH_PROGS(MAKE, [gmake make])
-CHECK_NONEMPTY(MAKE)
-MAKE_VERSION=`$MAKE --version | head -n 1 | grep '3.8[[12346789]]'`
-if test "x$MAKE_VERSION" = x; then
- AC_MSG_ERROR([You must use GNU make 3.81 or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure.])
-fi
-AC_PATH_PROG(MKDIR, mkdir)
-CHECK_NONEMPTY(MKDIR)
-AC_PATH_PROG(MV, mv)
-CHECK_NONEMPTY(MV)
-AC_PATH_PROGS(NAWK, [nawk gawk awk])
-CHECK_NONEMPTY(NAWK)
-AC_PATH_PROG(PRINTF, printf)
-CHECK_NONEMPTY(PRINTF)
+# Non-required basic tools
+
AC_PATH_PROG(THEPWDCMD, pwd)
-AC_PATH_PROG(RM, rm)
-CHECK_NONEMPTY(RM)
-RM="$RM -f"
-AC_PROG_SED
-CHECK_NONEMPTY(SED)
-AC_PATH_PROG(SH, sh)
-CHECK_NONEMPTY(SH)
-AC_PATH_PROG(SORT, sort)
-CHECK_NONEMPTY(SORT)
-AC_PATH_PROG(TAR, tar)
-CHECK_NONEMPTY(TAR)
-AC_PATH_PROG(TAIL, tail)
-CHECK_NONEMPTY(TAIL)
-AC_PATH_PROG(TEE, tee)
-CHECK_NONEMPTY(TEE)
-AC_PATH_PROG(TR, tr)
-CHECK_NONEMPTY(TR)
-AC_PATH_PROG(TOUCH, touch)
-CHECK_NONEMPTY(TOUCH)
-AC_PATH_PROG(WC, wc)
-CHECK_NONEMPTY(WC)
-AC_PATH_PROG(XARGS, xargs)
-CHECK_NONEMPTY(XARGS)
-AC_PATH_PROG(ZIP, zip)
-CHECK_NONEMPTY(ZIP)
-AC_PATH_PROG(UNZIP, unzip)
-CHECK_NONEMPTY(UNZIP)
AC_PATH_PROG(LDD, ldd)
if test "x$LDD" = "x"; then
# List shared lib dependencies is used for
@@ -390,16 +496,11 @@
if test "x$OTOOL" = "x"; then
OTOOL="true"
fi
-AC_PATH_PROG(READELF, readelf)
-AC_PATH_PROG(EXPR, expr)
-CHECK_NONEMPTY(EXPR)
-AC_PATH_PROG(FILE, file)
-CHECK_NONEMPTY(FILE)
+AC_PATH_PROGS(READELF, [readelf greadelf])
+AC_PATH_PROGS(OBJDUMP, [objdump gobjdump])
AC_PATH_PROG(HG, hg)
])
-
-
AC_DEFUN_ONCE([BASIC_COMPILE_UNCYGDRIVE],
[
# When using cygwin, we need a wrapper binary that renames
@@ -433,6 +534,8 @@
fi
AC_MSG_RESULT([yes])
rm -f $OUTPUT_ROOT/uncygdrive?.??? $OUTPUT_ROOT/uncygdrive.obj
+ # The path to uncygdrive to use should be Unix-style
+ UNCYGDRIVE="$OUTPUT_ROOT/uncygdrive.exe"
fi
AC_SUBST(UNCYGDRIVE)
--- a/common/autoconf/boot-jdk.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/boot-jdk.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -23,22 +23,186 @@
# questions.
#
-# Fixes paths on windows to be mixed mode short.
-AC_DEFUN([BOOTJDK_WIN_FIX_PATH],
+# Execute the check given as argument, and verify the result
+# If the Boot JDK was previously found, do nothing
+# $1 A command line (typically autoconf macro) to execute
+AC_DEFUN([BOOTJDK_DO_CHECK],
[
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- AC_PATH_PROG(CYGPATH, cygpath)
- tmp="[$]$1"
- # Convert to C:/ mixed style path without spaces.
- tmp=`$CYGPATH -s -m "$tmp"`
- $1="$tmp"
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+ $1
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring])
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring])
+ AC_MSG_NOTICE([(This might be an JRE instead of an JDK)])
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring])
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ [FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`]
+ if test "x$FOUND_VERSION_78" = x; then
+ AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring])
+ AC_MSG_NOTICE([(Your Boot JDK must be version 7 or 8)])
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+ SPACESAFE(BOOT_JDK,[the path to the Boot JDK])
+ AC_MSG_CHECKING([for Boot JDK])
+ AC_MSG_RESULT([$BOOT_JDK ($BOOT_JDK_VERSION)])
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+])
+
+# Test: Is bootjdk explicitely set by command line arguments?
+AC_DEFUN([BOOTJDK_CHECK_ARGUMENTS],
+[
+if test "x$with_boot_jdk" != x; then
+ BOOT_JDK=$with_boot_jdk
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using configure arguments])
+fi
+])
+
+# Test: Is bootjdk available from builddeps?
+AC_DEFUN([BOOTJDK_CHECK_BUILDDEPS],
+[
+ BDEPS_CHECK_MODULE(BOOT_JDK, bootjdk, xxx, [BOOT_JDK_FOUND=maybe], [BOOT_JDK_FOUND=no])
+])
+
+# Test: Is $JAVA_HOME set?
+AC_DEFUN([BOOTJDK_CHECK_JAVA_HOME],
+[
+ if test "x$JAVA_HOME" != x; then
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ # On Windows, JAVA_HOME is likely in DOS-style
+ JAVA_HOME_PROCESSED="`$CYGPATH -u "$JAVA_HOME"`"
+ else
+ JAVA_HOME_PROCESSED="$JAVA_HOME"
+ fi
+ if test ! -d "$JAVA_HOME_PROCESSED"; then
+ AC_MSG_NOTICE([Your JAVA_HOME points to a non-existing directory!])
+ else
+ # Aha, the user has set a JAVA_HOME
+ # let us use that as the Boot JDK.
+ BOOT_JDK="$JAVA_HOME_PROCESSED"
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using JAVA_HOME])
+ fi
fi
])
-AC_DEFUN([BOOTJDK_MISSING_ERROR],
+# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+AC_DEFUN([BOOTJDK_CHECK_JAVA_IN_PATH_IS_SYMLINK],
+[
+ AC_PATH_PROG(JAVAC_CHECK, javac)
+ AC_PATH_PROG(JAVA_CHECK, java)
+ BINARY="$JAVAC_CHECK"
+ if test "x$JAVAC_CHECK" = x; then
+ BINARY="$JAVA_CHECK"
+ fi
+ if test "x$BINARY" != x; then
+ # So there is a java(c) binary, it might be part of a JDK.
+ # Lets find the JDK/JRE directory by following symbolic links.
+ # Linux/GNU systems often have links from /usr/bin/java to
+ # /etc/alternatives/java to the real JDK binary.
+ SET_FULL_PATH_SPACESAFE(BINARY)
+ REMOVE_SYMBOLIC_LINKS(BINARY)
+ BOOT_JDK=`dirname "$BINARY"`
+ BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
+ if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
+ # Looks like we found ourselves an JDK
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using java(c) in PATH])
+ fi
+ fi
+])
+
+# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+AC_DEFUN([BOOTJDK_CHECK_LIBEXEC_JAVA_HOME],
+[
+ if test -x /usr/libexec/java_home; then
+ BOOT_JDK=`/usr/libexec/java_home`
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using /usr/libexec/java_home])
+ fi
+])
+
+# Look for a jdk in the given path. If there are multiple, try to select the newest.
+# If found, set BOOT_JDK and BOOT_JDK_FOUND.
+# $1 = Path to directory containing jdk installations.
+# $2 = String to append to the found JDK directory to get the proper JDK home
+AC_DEFUN([BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY],
[
- AC_MSG_NOTICE([This might be fixed by explicitely setting --with-boot-jdk])
- AC_MSG_ERROR([Cannot continue])
+ BOOT_JDK_PREFIX="$1"
+ BOOT_JDK_SUFFIX="$2"
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)])
+ fi
+ fi
+])
+
+# Call BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY, but use the given
+# environmental variable as base for where to look.
+# $1 Name of an environmal variable, assumed to point to the Program Files directory.
+AC_DEFUN([BOOTJDK_FIND_BEST_JDK_IN_WINDOWS_VIRTUAL_DIRECTORY],
+[
+ if test "x[$]$1" != x; then
+ BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY([`$CYGPATH -u "[$]$1"`/Java])
+ fi
+])
+
+# Test: Is there a JDK installed in default, well-known locations?
+AC_DEFUN([BOOTJDK_CHECK_WELL_KNOWN_LOCATIONS],
+[
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_WINDOWS_VIRTUAL_DIRECTORY([ProgramW6432])])
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_WINDOWS_VIRTUAL_DIRECTORY([PROGRAMW6432])])
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_WINDOWS_VIRTUAL_DIRECTORY([PROGRAMFILES])])
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_WINDOWS_VIRTUAL_DIRECTORY([ProgramFiles])])
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY([/cygdrive/c/Program Files/Java])])
+ elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY([/Library/Java/JavaVirtualMachines],[/Contents/Home])])
+ BOOTJDK_DO_CHECK([BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY([/System/Library/Java/JavaVirtualMachines],[/Contents/Home])])
+ fi
+])
+
+# Check that a command-line tool in the Boot JDK is correct
+# $1 = name of variable to assign
+# $2 = name of binary
+AC_DEFUN([BOOTJDK_CHECK_TOOL_IN_BOOTJDK],
+[
+ AC_MSG_CHECKING([for $2 in Boot JDK])
+ $1=$BOOT_JDK/bin/$2
+ if test ! -x [$]$1; then
+ AC_MSG_RESULT(not found)
+ AC_MSG_NOTICE([Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk])
+ AC_MSG_ERROR([Could not find $2 in the Boot JDK])
+ fi
+ AC_MSG_RESULT(ok)
])
###############################################################################
@@ -51,204 +215,74 @@
BOOT_JDK_FOUND=no
AC_ARG_WITH(boot-jdk, [AS_HELP_STRING([--with-boot-jdk],
[path to Boot JDK (used to bootstrap build) @<:@probed@:>@])])
-
-if test "x$with_boot_jdk" != x; then
- BOOT_JDK=$with_boot_jdk
- BOOT_JDK_FOUND=yes
-fi
-if test "x$BOOT_JDK_FOUND" = xno; then
- BDEPS_CHECK_MODULE(BOOT_JDK, boot-jdk, xxx, [BOOT_JDK_FOUND=yes], [BOOT_JDK_FOUND=no])
-fi
-if test "x$BOOT_JDK_FOUND" = xno; then
- if test "x$JAVA_HOME" != x; then
- if test ! -d "$JAVA_HOME"; then
- AC_MSG_NOTICE([Your JAVA_HOME points to a non-existing directory!])
- BOOTJDK_MISSING_ERROR
- fi
- # Aha, the user has set a JAVA_HOME
- # let us use that as the Boot JDK.
- BOOT_JDK="$JAVA_HOME"
- BOOT_JDK_FOUND=yes
- # To be on the safe side, lets check that it is a JDK.
- if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
- JAVAC="$BOOT_JDK/bin/javac"
- JAVA="$BOOT_JDK/bin/java"
- BOOT_JDK_FOUND=yes
- else
- AC_MSG_NOTICE([Your JAVA_HOME points to a JRE! The build needs a JDK! Please point JAVA_HOME to a JDK. JAVA_HOME=[$]JAVA_HOME])
- BOOTJDK_MISSING_ERROR
- fi
- fi
-fi
+# We look for the Boot JDK through various means, going from more certain to
+# more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
+# we detected something (if so, the path to the jdk is in BOOT_JDK). But we
+# must check if this is indeed valid; otherwise we'll continue looking.
-if test "x$BOOT_JDK_FOUND" = xno; then
- AC_PATH_PROG(JAVAC_CHECK, javac)
- AC_PATH_PROG(JAVA_CHECK, java)
- BINARY="$JAVAC_CHECK"
- if test "x$JAVAC_CHECK" = x; then
- BINARY="$JAVA_CHECK"
- fi
- if test "x$BINARY" != x; then
- # So there is a java(c) binary, it might be part of a JDK.
- # Lets find the JDK/JRE directory by following symbolic links.
- # Linux/GNU systems often have links from /usr/bin/java to
- # /etc/alternatives/java to the real JDK binary.
- WHICHCMD_SPACESAFE(BINARY,[path to javac])
- REMOVE_SYMBOLIC_LINKS(BINARY)
- BOOT_JDK=`dirname $BINARY`
- BOOT_JDK=`cd $BOOT_JDK/..; pwd`
- if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then
- JAVAC=$BOOT_JDK/bin/javac
- JAVA=$BOOT_JDK/bin/java
- BOOT_JDK_FOUND=yes
- fi
- fi
-fi
-
-if test "x$BOOT_JDK_FOUND" = xno; then
- # Try the MacOSX way.
- if test -x /usr/libexec/java_home; then
- BOOT_JDK=`/usr/libexec/java_home`
- if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then
- JAVAC=$BOOT_JDK/bin/javac
- JAVA=$BOOT_JDK/bin/java
- BOOT_JDK_FOUND=yes
- fi
- fi
+# Test: Is bootjdk explicitely set by command line arguments?
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_ARGUMENTS])
+if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
+ # Having specified an argument which is incorrect will produce an instant failure;
+ # we should not go on looking
+ AC_MSG_ERROR([The path given by --with-boot-jdk does not contain a valid Boot JDK])
fi
+# Test: Is bootjdk available from builddeps?
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_BUILDDEPS])
+
+# Test: Is $JAVA_HOME set?
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_HOME])
+
+# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_LIBEXEC_JAVA_HOME])
+
+# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_IN_PATH_IS_SYMLINK])
+
+# Test: Is there a JDK installed in default, well-known locations?
+BOOTJDK_DO_CHECK([BOOTJDK_CHECK_WELL_KNOWN_LOCATIONS])
+
+# If we haven't found anything yet, we've truly lost. Give up.
if test "x$BOOT_JDK_FOUND" = xno; then
- AC_PATH_PROG(JAVA_CHECK, java)
- if test "x$JAVA_CHECK" != x; then
- # There is a java in the path. But apparently we have not found a javac
- # in the path, since that would have been tested earlier.
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # Now if this is a windows platform. The default installation of a JDK
- # actually puts the JRE in the path and keeps the JDK out of the path!
- # Go look in the default installation location.
- BOOT_JDK=/cygdrive/c/Program\ Files/Java/`ls /cygdrive/c/Program\ Files/Java | grep jdk | sort -r | head --lines 1`
- if test -d "$BOOT_JDK"; then
- BOOT_JDK_FOUND=yes
- fi
- fi
- if test "x$BOOT_JDK_FOUND" = xno; then
- HELP_MSG_MISSING_DEPENDENCY([openjdk])
- AC_MSG_NOTICE([Found a JRE, not not a JDK! Please remove the JRE from your path and put a JDK there instead. $HELP_MSG])
- BOOTJDK_MISSING_ERROR
- fi
- else
- HELP_MSG_MISSING_DEPENDENCY([openjdk])
- AC_MSG_NOTICE([Could not find a JDK. $HELP_MSG])
- BOOTJDK_MISSING_ERROR
- fi
+ HELP_MSG_MISSING_DEPENDENCY([openjdk])
+ AC_MSG_NOTICE([Could not find a valid Boot JDK. $HELP_MSG])
+ AC_MSG_NOTICE([This might be fixed by explicitely setting --with-boot-jdk])
+ AC_MSG_ERROR([Cannot continue])
fi
-BOOTJDK_WIN_FIX_PATH(BOOT_JDK)
-
-# Now see if we can find the rt.jar, or its nearest equivalent.
+# Setup proper paths for what we found
BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
-SPACESAFE(BOOT_RTJAR,[the path to the Boot JDK rt.jar (or nearest equivalent)])
-
-BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
-SPACESAFE(BOOT_TOOLSJAR,[the path to the Boot JDK tools.jar (or nearest equivalent)])
-
-if test ! -f $BOOT_RTJAR; then
+if test ! -f "$BOOT_RTJAR"; then
# On MacOSX it is called classes.jar
- BOOT_RTJAR=$BOOT_JDK/../Classes/classes.jar
- if test ! -f $BOOT_RTJAR; then
- AC_MSG_NOTICE([Cannot find the rt.jar or its equivalent!])
- AC_MSG_NOTICE([This typically means that configure failed to automatically find a suitable Boot JDK])
- BOOTJDK_MISSING_ERROR
+ BOOT_RTJAR="$BOOT_JDK/../Classes/classes.jar"
+ if test -f "$BOOT_RTJAR"; then
+ # Remove the ..
+ BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
fi
- # Remove the ..
- BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
- # The tools.jar is part of classes.jar
- BOOT_TOOLSJAR="$BOOT_RTJAR"
fi
-
-AC_SUBST(BOOT_JDK)
+BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
+BOOT_JDK="$BOOT_JDK"
AC_SUBST(BOOT_RTJAR)
AC_SUBST(BOOT_TOOLSJAR)
-AC_MSG_CHECKING([for Boot JDK])
-AC_MSG_RESULT([$BOOT_JDK])
-AC_MSG_CHECKING([for Boot rt.jar])
-AC_MSG_RESULT([$BOOT_RTJAR])
-AC_MSG_CHECKING([for Boot tools.jar])
-AC_MSG_RESULT([$BOOT_TOOLSJAR])
+AC_SUBST(BOOT_JDK)
-# Use the java tool from the Boot JDK.
-AC_MSG_CHECKING([for java in Boot JDK])
-JAVA=$BOOT_JDK/bin/java
-if test ! -x $JAVA; then
- AC_MSG_NOTICE([Could not find a working java])
- BOOTJDK_MISSING_ERROR
-fi
-BOOT_JDK_VERSION=`$JAVA -version 2>&1 | head -n 1`
-AC_MSG_RESULT([yes $BOOT_JDK_VERSION])
-AC_SUBST(JAVA)
+# Setup tools from the Boot JDK.
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVA,java)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAC,javac)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAH,javah)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAP,javap)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAR,jar)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(RMIC,rmic)
+BOOTJDK_CHECK_TOOL_IN_BOOTJDK(NATIVE2ASCII,native2ascii)
-# Extra M4 quote needed to protect [] in grep expression.
-[FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`]
-if test "x$FOUND_VERSION_78" = x; then
- HELP_MSG_MISSING_DEPENDENCY([openjdk])
- AC_MSG_NOTICE([Your boot-jdk must be version 7 or 8. $HELP_MSG])
- BOOTJDK_MISSING_ERROR
-fi
+# Finally, set some other options...
# When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
BOOT_JDK_SOURCETARGET="-source 7 -target 7"
AC_SUBST(BOOT_JDK_SOURCETARGET)
-
-# Use the javac tool from the Boot JDK.
-AC_MSG_CHECKING([for javac in Boot JDK])
-JAVAC=$BOOT_JDK/bin/javac
-if test ! -x $JAVAC; then
- AC_MSG_ERROR([Could not find a working javac])
-fi
-AC_MSG_RESULT(yes)
-AC_SUBST(JAVAC)
AC_SUBST(JAVAC_FLAGS)
-
-# Use the javah tool from the Boot JDK.
-AC_MSG_CHECKING([for javah in Boot JDK])
-JAVAH=$BOOT_JDK/bin/javah
-if test ! -x $JAVAH; then
- AC_MSG_NOTICE([Could not find a working javah])
- BOOTJDK_MISSING_ERROR
-fi
-AC_MSG_RESULT(yes)
-AC_SUBST(JAVAH)
-
-# Use the jar tool from the Boot JDK.
-AC_MSG_CHECKING([for jar in Boot JDK])
-JAR=$BOOT_JDK/bin/jar
-if test ! -x $JAR; then
- AC_MSG_NOTICE([Could not find a working jar])
- BOOTJDK_MISSING_ERROR
-fi
-AC_SUBST(JAR)
-AC_MSG_RESULT(yes)
-
-# Use the rmic tool from the Boot JDK.
-AC_MSG_CHECKING([for rmic in Boot JDK])
-RMIC=$BOOT_JDK/bin/rmic
-if test ! -x $RMIC; then
- AC_MSG_NOTICE([Could not find a working rmic])
- BOOTJDK_MISSING_ERROR
-fi
-AC_SUBST(RMIC)
-AC_MSG_RESULT(yes)
-
-# Use the native2ascii tool from the Boot JDK.
-AC_MSG_CHECKING([for native2ascii in Boot JDK])
-NATIVE2ASCII=$BOOT_JDK/bin/native2ascii
-if test ! -x $NATIVE2ASCII; then
- AC_MSG_NOTICE([Could not find a working native2ascii])
- BOOTJDK_MISSING_ERROR
-fi
-AC_MSG_RESULT(yes)
-AC_SUBST(NATIVE2ASCII)
])
AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK_ARGUMENTS],
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/autoconf/bootcycle-spec.gmk.in Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,43 @@
+#
+# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# Support for building boot cycle builds
+
+# First include the real base spec.gmk file
+include @SPEC@
+
+# Check that the user did not try to specify a different java to use for compiling.
+ifneq ($(firstword $(SJAVAC_SERVER_JAVA)),$(firstword $(JAVA)))
+ $(error Bootcycle builds are not possible if --with-sjavac-server-java is specified)
+endif
+
+# Override specific values to do a boot cycle build
+
+# The bootcycle build has a different output directory
+BUILD_OUTPUT:=@BUILD_OUTPUT@/bootcycle-build
+
+# Use a different Boot JDK
+BOOT_JDK:=@BUILD_OUTPUT@/images/j2sdk-image
+BOOT_RTJAR:=@BUILD_OUTPUT@/images/j2sdk-image/jre/lib/rt.jar
--- a/common/autoconf/build-aux/config.guess Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/build-aux/config.guess Wed Jul 05 18:22:52 2017 +0200
@@ -22,17 +22,39 @@
# questions.
#
-# This is a wrapper for the config.guess from autoconf. The latter does not properly
-# detect amd64 systems, since that require isainfo instead of uname. Instead of patching
-# the autoconf system (which might easily get lost in a future update), we wrap it and
-# fix the broken property, if needed.
+# This is a wrapper for the config.guess from autoconf. The latter does not
+# properly detect 64 bit systems on all platforms. Instead of patching the
+# autoconf system (which might easily get lost in a future update), we wrap it
+# and fix the broken property, if needed.
DIR=`dirname $0`
OUT=`. $DIR/autoconf-config.guess`
+
+# Test and fix solaris on x86_64
echo $OUT | grep i386-pc-solaris > /dev/null 2> /dev/null
if test $? = 0; then
- # isainfo -n returns either i386 or amd64 on Intel systems
+ # isainfo -n returns either i386 or amd64
REAL_CPU=`isainfo -n`
OUT=$REAL_CPU`echo $OUT | sed -e 's/[^-]*//'`
fi
+
+# Test and fix solaris on sparcv9
+echo $OUT | grep sparc-sun-solaris > /dev/null 2> /dev/null
+if test $? = 0; then
+ # isainfo -n returns either sparc or sparcv9
+ REAL_CPU=`isainfo -n`
+ OUT=$REAL_CPU`echo $OUT | sed -e 's/[^-]*//'`
+fi
+
+# Test and fix cygwin on x86_64
+echo $OUT | grep 86-pc-cygwin > /dev/null 2> /dev/null
+if test $? = 0; then
+ case `echo $PROCESSOR_IDENTIFIER | cut -f1 -d' '` in
+ intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64)
+ REAL_CPU=x86_64
+ OUT=$REAL_CPU`echo $OUT | sed -e 's/[^-]*//'`
+ ;;
+ esac
+fi
+
echo $OUT
--- a/common/autoconf/build-performance.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/build-performance.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -30,27 +30,19 @@
FOUND_CORES=no
if test -f /proc/cpuinfo; then
- # Looks like a Linux system
+ # Looks like a Linux (or cygwin) system
NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
FOUND_CORES=yes
- fi
-
- if test -x /usr/sbin/psrinfo; then
+ elif test -x /usr/sbin/psrinfo; then
# Looks like a Solaris system
NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
FOUND_CORES=yes
- fi
-
- if test -x /usr/sbin/system_profiler; then
+ elif test -x /usr/sbin/system_profiler; then
# Looks like a MacOSX system
NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print [$]5}'`
FOUND_CORES=yes
fi
- if test "x$build_os" = xwindows; then
- NUM_CORES=4
- fi
-
# For c/c++ code we run twice as many concurrent build
# jobs than we have cores, otherwise we will stall on io.
CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2`
@@ -66,31 +58,26 @@
AC_DEFUN([BPERF_CHECK_MEMORY_SIZE],
[
AC_MSG_CHECKING([for memory size])
- # Default to 1024MB
+ # Default to 1024 MB
MEMORY_SIZE=1024
FOUND_MEM=no
- if test -f /proc/cpuinfo; then
- # Looks like a Linux system
+ if test -f /proc/meminfo; then
+ # Looks like a Linux (or cygwin) system
MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print [$]2}'`
MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
FOUND_MEM=yes
- fi
-
- if test -x /usr/sbin/prtconf; then
+ elif test -x /usr/sbin/prtconf; then
# Looks like a Solaris system
MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print [$]3 }'`
FOUND_MEM=yes
- fi
-
- if test -x /usr/sbin/system_profiler; then
+ elif test -x /usr/sbin/system_profiler; then
# Looks like a MacOSX system
MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print [$]2}'`
MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
FOUND_MEM=yes
- fi
-
- if test "x$build_os" = xwindows; then
+ elif test "x$build_os" = xwindows; then
+ # Windows, but without cygwin
MEMORY_SIZE=`systeminfo | grep 'Total Physical Memory:' | awk '{ print [$]4 }' | sed 's/,//'`
FOUND_MEM=yes
fi
@@ -98,7 +85,7 @@
if test "x$FOUND_MEM" = xyes; then
AC_MSG_RESULT([$MEMORY_SIZE MB])
else
- AC_MSG_RESULT([could not detect memory size defaulting to 1024MB!])
+ AC_MSG_RESULT([could not detect memory size defaulting to 1024 MB!])
fi
])
@@ -240,46 +227,30 @@
AC_DEFUN_ONCE([BPERF_SETUP_SMART_JAVAC],
[
-AC_ARG_WITH(server-java, [AS_HELP_STRING([--with-server-java],
- [use this java binary for running the javac background server and other long running java tasks in the build process,
- e.g. ---with-server-java="/opt/jrockit/bin/java -server"])])
+AC_ARG_WITH(sjavac-server-java, [AS_HELP_STRING([--with-sjavac-server-java],
+ [use this java binary for running the sjavac background server and other long running java tasks in the build process,
+ e.g. ---with-sjavac-server-java="/opt/jrockit/bin/java -server"])])
-if test "x$with_server_java" != x; then
- SERVER_JAVA="$with_server_java"
- FOUND_VERSION=`$SERVER_JAVA -version 2>&1 | grep " version \""`
+if test "x$with_sjavac_server_java" != x; then
+ SJAVAC_SERVER_JAVA="$with_sjavac_server_java"
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" = x; then
- AC_MSG_ERROR([Could not execute server java: $SERVER_JAVA])
+ AC_MSG_ERROR([Could not execute server java: $SJAVAC_SERVER_JAVA])
fi
else
- SERVER_JAVA=""
+ SJAVAC_SERVER_JAVA=""
# Hotspot specific options.
- ADD_JVM_ARG_IF_OK([-XX:+UseParallelOldGC],SERVER_JAVA,[$JAVA])
- ADD_JVM_ARG_IF_OK([-verbosegc],SERVER_JAVA,[$JAVA])
+ ADD_JVM_ARG_IF_OK([-verbosegc],SJAVAC_SERVER_JAVA,[$JAVA])
# JRockit specific options.
- ADD_JVM_ARG_IF_OK([-Xverbose:gc],SERVER_JAVA,[$JAVA])
- SERVER_JAVA="$JAVA $SERVER_JAVA"
+ ADD_JVM_ARG_IF_OK([-Xverbose:gc],SJAVAC_SERVER_JAVA,[$JAVA])
+ SJAVAC_SERVER_JAVA="$JAVA $SJAVAC_SERVER_JAVA"
fi
-AC_SUBST(SERVER_JAVA)
+AC_SUBST(SJAVAC_SERVER_JAVA)
-AC_MSG_CHECKING([whether to use shared server for javac])
-AC_ARG_ENABLE([javac-server], [AS_HELP_STRING([--enable-javac-server],
- [enable the shared javac server during the build process @<:@disabled@:>@])],
- [ENABLE_JAVAC_SERVER="${enableval}"], [ENABLE_JAVAC_SERVER='no'])
-AC_MSG_RESULT([$ENABLE_JAVAC_SERVER])
-if test "x$ENABLE_JAVAC_SERVER" = xyes; then
- JAVAC_USE_REMOTE=true
- JAVAC_SERVERS="$OUTPUT_ROOT/javacservers"
-else
- JAVAC_USE_REMOTE=false
- JAVAC_SERVERS=
-fi
-AC_SUBST(JAVAC_USE_REMOTE)
-AC_SUBST(JAVAC_SERVERS)
-
-AC_ARG_WITH(javac-server-cores, [AS_HELP_STRING([--with-javac-server-cores],
- [use at most this number of concurrent threads on the javac server @<:@probed@:>@])])
-if test "x$with_javac_server_cores" != x; then
- JAVAC_SERVER_CORES="$with_javac_server_cores"
+AC_ARG_WITH(sjavac-server-cores, [AS_HELP_STRING([--with-sjavac-server-cores],
+ [use at most this number of concurrent threads on the sjavac server @<:@probed@:>@])])
+if test "x$with_sjavac_server_cores" != x; then
+ SJAVAC_SERVER_CORES="$with_sjavac_server_cores"
else
if test "$NUM_CORES" -gt 16; then
# We set this arbitrary limit because we want to limit the heap
@@ -287,86 +258,49 @@
# In the future we will make the javac compilers in the server
# share more and more state, thus enabling us to use more and
# more concurrent threads in the server.
- JAVAC_SERVER_CORES="16"
+ SJAVAC_SERVER_CORES="16"
else
- JAVAC_SERVER_CORES="$NUM_CORES"
+ SJAVAC_SERVER_CORES="$NUM_CORES"
fi
if test "$MEMORY_SIZE" -gt "17000"; then
MAX_HEAP_MEM=10000
- ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xms10G -Xmx10G],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn2G],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-d64],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms10G -Xmx10G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
elif test "$MEMORY_SIZE" -gt "10000"; then
MAX_HEAP_MEM=6000
- ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xms6G -Xmx6G],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn1G],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-d64],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms6G -Xmx6G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
elif test "$MEMORY_SIZE" -gt "5000"; then
MAX_HEAP_MEM=3000
- ADD_JVM_ARG_IF_OK([-d64],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xms1G -Xmx3G],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-d64],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms1G -Xmx3G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
elif test "$MEMORY_SIZE" -gt "3800"; then
MAX_HEAP_MEM=2500
- ADD_JVM_ARG_IF_OK([-Xms1G -Xmx2500M],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms1G -Xmx2500M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
elif test "$MEMORY_SIZE" -gt "1900"; then
MAX_HEAP_MEM=1200
- ADD_JVM_ARG_IF_OK([-Xms700M -Xmx1200M],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn256M],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms700M -Xmx1400M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
elif test "$MEMORY_SIZE" -gt "1000"; then
MAX_HEAP_MEM=900
- ADD_JVM_ARG_IF_OK([-Xms400M -Xmx900M],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn128M],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms400M -Xmx1100M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
else
MAX_HEAP_MEM=512
- ADD_JVM_ARG_IF_OK([-Xms256M -Xmx512M],SERVER_JAVA,[$SERVER_JAVA])
- ADD_JVM_ARG_IF_OK([-Xmn128M],SERVER_JAVA,[$SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms256M -Xmx512M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
fi
+ ADD_JVM_ARG_IF_OK([-XX:PermSize=32m],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-XX:MaxPermSize=160m],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-XX:ThreadStackSize=$STACK_SIZE],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+
MAX_COMPILERS_IN_HEAP=`expr $MAX_HEAP_MEM / 501`
- if test "$JAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then
+ if test "$SJAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then
AC_MSG_CHECKING([if number of server cores must be reduced])
- JAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP"
- AC_MSG_RESULT([yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB])
+ SJAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP"
+ AC_MSG_RESULT([yes, to $SJAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB])
fi
fi
-AC_SUBST(JAVAC_SERVER_CORES)
-
-AC_MSG_CHECKING([whether to track dependencies between Java packages])
-AC_ARG_ENABLE([javac-deps], [AS_HELP_STRING([--enable-javac-deps],
- [enable the dependency tracking between Java packages @<:@disabled@:>@])],
- [ENABLE_JAVAC_DEPS="${enableval}"], [ENABLE_JAVAC_DEPS='no'])
-AC_MSG_RESULT([$ENABLE_JAVAC_DEPS])
-if test "x$ENABLE_JAVAC_DEPS" = xyes; then
- JAVAC_USE_DEPS=true
-else
- JAVAC_USE_DEPS=false
-fi
-AC_SUBST(JAVAC_USE_DEPS)
-
-AC_MSG_CHECKING([whether to use multiple cores for javac compilation])
-AC_ARG_ENABLE([javac-multi-core], [AS_HELP_STRING([--enable-javac-multi-core],
- [compile Java packages concurrently @<:@disabled@:>@])],
- [ENABLE_JAVAC_MULTICORE="${enableval}"], [ENABLE_JAVAC_MULTICORE='no'])
-AC_MSG_RESULT([$ENABLE_JAVAC_MULTICORE])
-if test "x$ENABLE_JAVAC_MULTICORE" = xyes; then
- JAVAC_USE_MODE=MULTI_CORE_CONCURRENT
-else
- JAVAC_USE_MODE=SINGLE_THREADED_BATCH
- if test "x$ENABLE_JAVAC_DEPS" = xyes; then
- AC_MSG_WARN([Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options.])
- AC_MSG_WARN([Disabling dependency tracking for you now.])
- JAVAC_USE_DEPS=false
- fi
- if test "x$ENABLE_JAVAC_SERVER" = xyes; then
- AC_MSG_WARN([The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options.])
- AC_MSG_WARN([Disabling javac server for you now.])
- JAVAC_USE_REMOTE=false
- fi
-fi
-AC_SUBST(JAVAC_USE_MODE)
+AC_SUBST(SJAVAC_SERVER_CORES)
AC_MSG_CHECKING([whether to use sjavac])
AC_ARG_ENABLE([sjavac], [AS_HELP_STRING([--enable-sjavac],
@@ -375,4 +309,11 @@
AC_MSG_RESULT([$ENABLE_SJAVAC])
AC_SUBST(ENABLE_SJAVAC)
+if test "x$ENABLE_SJAVAC" = xyes; then
+ SJAVAC_SERVER_DIR="$OUTPUT_ROOT/javacservers"
+else
+ SJAVAC_SERVER_DIR=
+fi
+AC_SUBST(SJAVAC_SERVER_DIR)
+
])
--- a/common/autoconf/builddeps.conf.example Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/builddeps.conf.example Wed Jul 05 18:22:52 2017 +0200
@@ -31,7 +31,7 @@
# Translate a configuration triplet/quadruplet into something
# known by this configuration file.
-# If no rewrite was found, then rewritten_target=${OPENJDK_TARGET_SYSTEM}
+# If no rewrite was found, then rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
REWRITE_i686_pc_linux_gnu=i686-unknown-linux-gnu
REWRITE_i386_pc_solaris2_10=i686-sun-solaris2_10
--- a/common/autoconf/builddeps.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/builddeps.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -52,19 +52,19 @@
fi
# Create build and target names that use _ instead of "-" and ".".
# This is necessary to use them in variable names.
- build_var=`echo ${OPENJDK_BUILD_SYSTEM} | tr '-' '_' | tr '.' '_'`
- target_var=`echo ${OPENJDK_TARGET_SYSTEM} | tr '-' '_' | tr '.' '_'`
+ build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
# Extract rewrite information for build and target
eval rewritten_build=\${REWRITE_${build_var}}
if test "x$rewritten_build" = x; then
- rewritten_build=${OPENJDK_BUILD_SYSTEM}
+ rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
echo Build stays the same $rewritten_build
else
echo Rewriting build for builddeps into $rewritten_build
fi
eval rewritten_target=\${REWRITE_${target_var}}
if test "x$rewritten_target" = x; then
- rewritten_target=${OPENJDK_TARGET_SYSTEM}
+ rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
echo Target stays the same $rewritten_target
else
echo Rewriting target for builddeps into $rewritten_target
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/autoconf/compare.sh.in Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,1669 @@
+#!/bin/bash
+#
+# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# This script is processed by configure before it's usable. It is run from
+# the root of the build directory.
+
+
+##########################################################################################
+# Substitutions from autoconf
+
+LEGACY_BUILD_DIR=@OPENJDK_TARGET_OS@-@OPENJDK_TARGET_CPU_LEGACY@
+
+OPENJDK_TARGET_OS="@OPENJDK_TARGET_OS@"
+OPENJDK_TARGET_CPU="@OPENJDK_TARGET_CPU@"
+
+AWK="@AWK@"
+CAT="@CAT@"
+CMP="@CMP@"
+CP="@CP@"
+CUT="@CUT@"
+DIFF="@DIFF@"
+DUMPBIN="@UNCYGDRIVE@ @DUMPBIN@"
+EXPR="@EXPR@"
+FILE="@FILE@"
+FIND="@FIND@"
+GREP="@GREP@"
+JAVAP="@UNCYGDRIVE@ @BOOT_JDK@/bin/javap"
+LDD="@LDD@"
+MKDIR="@MKDIR@"
+NM="@NM@"
+OBJDUMP="@OBJDUMP@"
+OTOOL="@OTOOL@"
+PRINTF="@PRINTF@"
+READELF="@READELF@"
+RM="@RM@"
+SED="@SED@"
+SORT="@SORT@"
+STRIP="@POST_STRIP_CMD@"
+TEE="@TEE@"
+UNIQ="@UNIQ@"
+UNZIP="@UNZIP@"
+
+SRC_ROOT="@SRC_ROOT@"
+
+if [ "$OPENJDK_TARGET_OS" = "macosx" ]; then
+ READELF_CMD="otool -v -V -h -X -t -d"
+elif [ -n "$READELF" ] && [ "$OPENJDK_TARGET_OS" != "windows" ]; then
+ READELF_CMD="$READELF -a"
+fi
+
+if [ "$OPENJDK_TARGET_OS" = "macosx" ]; then
+ LDD_CMD="$OTOOL -L"
+elif [ -n "$LDD" ]; then
+ LDD_CMD="$LDD"
+fi
+
+##########################################################################################
+# Diff exceptions
+
+if [ "$OPENJDK_TARGET_OS" = "linux" ] && [ "$OPENJDK_TARGET_CPU" = "x86_64" ]; then
+STRIP_BEFORE_COMPARE="
+./demo/jvmti/compiledMethodLoad/lib/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/libgctest.so
+./demo/jvmti/heapTracker/lib/libheapTracker.so
+./demo/jvmti/heapViewer/lib/libheapViewer.so
+./demo/jvmti/hprof/lib/libhprof.so
+./demo/jvmti/minst/lib/libminst.so
+./demo/jvmti/mtrace/lib/libmtrace.so
+./demo/jvmti/versionCheck/lib/libversionCheck.so
+./demo/jvmti/waiters/lib/libwaiters.so
+"
+
+KNOWN_BIN_DIFF="
+"
+
+ACCEPTED_BIN_DIFF="
+./demo/jvmti/compiledMethodLoad/lib/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/libgctest.so
+./demo/jvmti/heapTracker/lib/libheapTracker.so
+./demo/jvmti/heapViewer/lib/libheapViewer.so
+./demo/jvmti/hprof/lib/libhprof.so
+./demo/jvmti/minst/lib/libminst.so
+./demo/jvmti/mtrace/lib/libmtrace.so
+./demo/jvmti/versionCheck/lib/libversionCheck.so
+./demo/jvmti/waiters/lib/libwaiters.so
+./jre/lib/amd64/libattach.so
+./jre/lib/amd64/libdt_socket.so
+./jre/lib/amd64/libhprof.so
+./jre/lib/amd64/libinstrument.so
+./jre/lib/amd64/libjava_crw_demo.so
+./jre/lib/amd64/libjsdt.so
+./jre/lib/amd64/libjsig.so
+./jre/lib/amd64/libmanagement.so
+./jre/lib/amd64/libnpt.so
+./jre/lib/amd64/libsaproc.so
+./jre/lib/amd64/libverify.so
+./jre/lib/amd64/server/libjsig.so
+./jre/lib/amd64/server/libjvm.so
+./bin/appletviewer
+./bin/extcheck
+./bin/idlj
+./bin/jar
+./bin/jarsigner
+./bin/java
+./bin/javac
+./bin/javadoc
+./bin/javah
+./bin/javap
+./bin/jcmd
+./bin/jconsole
+./bin/jdb
+./bin/jhat
+./bin/jinfo
+./bin/jmap
+./bin/jps
+./bin/jrunscript
+./bin/jsadebugd
+./bin/jstack
+./bin/jstat
+./bin/jstatd
+./bin/keytool
+./bin/native2ascii
+./bin/orbd
+./bin/pack200
+./bin/policytool
+./bin/rmic
+./bin/rmid
+./bin/rmiregistry
+./bin/schemagen
+./bin/serialver
+./bin/servertool
+./bin/tnameserv
+./bin/wsgen
+./bin/wsimport
+./bin/xjc
+./jre/bin/java
+./jre/bin/keytool
+./jre/bin/orbd
+./jre/bin/pack200
+./jre/bin/policytool
+./jre/bin/rmid
+./jre/bin/rmiregistry
+./jre/bin/servertool
+./jre/bin/tnameserv
+"
+
+KNOWN_SIZE_DIFF="
+"
+
+KNOWN_SYM_DIFF="
+"
+
+KNOWN_ELF_DIFF="
+./demo/jvmti/heapTracker/lib/libheapTracker.so
+./demo/jvmti/hprof/lib/libhprof.so
+./demo/jvmti/waiters/lib/libwaiters.so
+"
+fi
+
+if [ "$OPENJDK_TARGET_OS" = "solaris" ] && [ "$OPENJDK_TARGET_CPU" = "x86" ]; then
+
+STRIP_BEFORE_COMPARE="
+./demo/jni/Poller/lib/libPoller.so
+./demo/jvmti/compiledMethodLoad/lib/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/libgctest.so
+./demo/jvmti/heapTracker/lib/libheapTracker.so
+./demo/jvmti/heapViewer/lib/libheapViewer.so
+./demo/jvmti/hprof/lib/libhprof.so
+./demo/jvmti/minst/lib/libminst.so
+./demo/jvmti/mtrace/lib/libmtrace.so
+./demo/jvmti/versionCheck/lib/libversionCheck.so
+./demo/jvmti/waiters/lib/libwaiters.so
+./jre/lib/i386/jexec
+"
+
+SORT_SYMBOLS="
+./jre/lib/i386/client/libjvm.so
+./jre/lib/i386/server/libjvm.so
+"
+
+SKIP_BIN_DIFF="true"
+
+ACCEPTED_SMALL_SIZE_DIFF="
+./demo/jni/Poller/lib/libPoller.so
+./demo/jvmti/compiledMethodLoad/lib/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/libgctest.so
+./demo/jvmti/heapTracker/lib/libheapTracker.so
+./demo/jvmti/heapViewer/lib/libheapViewer.so
+./demo/jvmti/hprof/lib/libhprof.so
+./demo/jvmti/minst/lib/libminst.so
+./demo/jvmti/mtrace/lib/libmtrace.so
+./demo/jvmti/versionCheck/lib/libversionCheck.so
+./demo/jvmti/waiters/lib/libwaiters.so
+./jre/lib/i386/client/libjvm.so
+./jre/lib/i386/jli/libjli.so
+./jre/lib/i386/libJdbcOdbc.so
+./jre/lib/i386/libattach.so
+./jre/lib/i386/libawt.so
+./jre/lib/i386/libawt_headless.so
+./jre/lib/i386/libawt_xawt.so
+./jre/lib/i386/libdcpr.so
+./jre/lib/i386/libdt_socket.so
+./jre/lib/i386/libfontmanager.so
+./jre/lib/i386/libhprof.so
+./jre/lib/i386/libinstrument.so
+./jre/lib/i386/libj2gss.so
+./jre/lib/i386/libj2pcsc.so
+./jre/lib/i386/libj2pkcs11.so
+./jre/lib/i386/libj2ucrypto.so
+./jre/lib/i386/libjaas_unix.so
+./jre/lib/i386/libjava.so
+./jre/lib/i386/libjava_crw_demo.so
+./jre/lib/i386/libjawt.so
+./jre/lib/i386/libjdwp.so
+./jre/lib/i386/libjfr.so
+./jre/lib/i386/libjpeg.so
+./jre/lib/i386/libjsdt.so
+./jre/lib/i386/libjsound.so
+./jre/lib/i386/libkcms.so
+./jre/lib/i386/libmanagement.so
+./jre/lib/i386/libmlib_image.so
+./jre/lib/i386/libnet.so
+./jre/lib/i386/libnio.so
+./jre/lib/i386/libnpt.so
+./jre/lib/i386/libsctp.so
+./jre/lib/i386/libsplashscreen.so
+./jre/lib/i386/libsunec.so
+./jre/lib/i386/libsunwjdga.so
+./jre/lib/i386/libt2k.so
+./jre/lib/i386/libunpack.so
+./jre/lib/i386/libverify.so
+./jre/lib/i386/libzip.so
+./jre/lib/i386/server/libjvm.so
+./bin/appletviewer
+./bin/extcheck
+./bin/idlj
+./bin/jar
+./bin/jarsigner
+./bin/java
+./bin/javac
+./bin/javadoc
+./bin/javah
+./bin/javap
+./bin/jcmd
+./bin/jconsole
+./bin/jdb
+./bin/jhat
+./bin/jinfo
+./bin/jmap
+./bin/jps
+./bin/jrunscript
+./bin/jsadebugd
+./bin/jstack
+./bin/jstat
+./bin/jstatd
+./bin/keytool
+./bin/native2ascii
+./bin/orbd
+./bin/pack200
+./bin/policytool
+./bin/rmic
+./bin/rmid
+./bin/rmiregistry
+./bin/schemagen
+./bin/serialver
+./bin/servertool
+./bin/tnameserv
+./bin/unpack200
+./bin/wsgen
+./bin/wsimport
+./bin/xjc
+./jre/bin/java
+./jre/bin/keytool
+./jre/bin/orbd
+./jre/bin/pack200
+./jre/bin/policytool
+./jre/bin/rmid
+./jre/bin/rmiregistry
+./jre/bin/servertool
+./jre/bin/tnameserv
+./jre/bin/unpack200
+./jre/lib/i386/jexec
+"
+
+SKIP_ELF_DIFF="true"
+
+# libjvm.so differs in the random 15 char prefix on some symbols.
+ACCEPTED_DIS_DIFF="
+./jre/lib/i386/client/libjvm.so
+./jre/lib/i386/server/libjvm.so
+"
+
+fi
+
+if [ "$OPENJDK_TARGET_OS" = "solaris" ] && [ "$OPENJDK_TARGET_CPU" = "x86_64" ]; then
+
+STRIP_BEFORE_COMPARE="
+./demo/jni/Poller/lib/amd64/libPoller.so
+./demo/jvmti/compiledMethodLoad/lib/amd64/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/amd64/libgctest.so
+./demo/jvmti/heapTracker/lib/amd64/libheapTracker.so
+./demo/jvmti/heapViewer/lib/amd64/libheapViewer.so
+./demo/jvmti/hprof/lib/amd64/libhprof.so
+./demo/jvmti/minst/lib/amd64/libminst.so
+./demo/jvmti/mtrace/lib/amd64/libmtrace.so
+./demo/jvmti/versionCheck/lib/amd64/libversionCheck.so
+./demo/jvmti/waiters/lib/amd64/libwaiters.so
+"
+
+SORT_SYMBOLS="
+./jre/lib/amd64/server/libjvm.so
+"
+
+SKIP_BIN_DIFF="true"
+
+ACCEPTED_SMALL_SIZE_DIFF="
+./demo/jni/Poller/lib/amd64/libPoller.so
+./demo/jvmti/compiledMethodLoad/lib/amd64/libcompiledMethodLoad.so
+./demo/jvmti/gctest/lib/amd64/libgctest.so
+./demo/jvmti/heapTracker/lib/amd64/libheapTracker.so
+./demo/jvmti/heapViewer/lib/amd64/libheapViewer.so
+./demo/jvmti/hprof/lib/amd64/libhprof.so
+./demo/jvmti/minst/lib/amd64/libminst.so
+./demo/jvmti/mtrace/lib/amd64/libmtrace.so
+./demo/jvmti/versionCheck/lib/amd64/libversionCheck.so
+./demo/jvmti/waiters/lib/amd64/libwaiters.so
+./jre/lib/amd64/jli/libjli.so
+./jre/lib/amd64/libJdbcOdbc.so
+./jre/lib/amd64/libattach.so
+./jre/lib/amd64/libawt.so
+./jre/lib/amd64/libawt_headless.so
+./jre/lib/amd64/libawt_xawt.so
+./jre/lib/amd64/libdcpr.so
+./jre/lib/amd64/libdt_socket.so
+./jre/lib/amd64/libfontmanager.so
+./jre/lib/amd64/libhprof.so
+./jre/lib/amd64/libinstrument.so
+./jre/lib/amd64/libj2gss.so
+./jre/lib/amd64/libj2pcsc.so
+./jre/lib/amd64/libj2pkcs11.so
+./jre/lib/amd64/libj2ucrypto.so
+./jre/lib/amd64/libjaas_unix.so
+./jre/lib/amd64/libjava.so
+./jre/lib/amd64/libjava_crw_demo.so
+./jre/lib/amd64/libjawt.so
+./jre/lib/amd64/libjdwp.so
+./jre/lib/amd64/libjfr.so
+./jre/lib/amd64/libjpeg.so
+./jre/lib/amd64/libjsdt.so
+./jre/lib/amd64/libjsound.so
+./jre/lib/amd64/libkcms.so
+./jre/lib/amd64/libmanagement.so
+./jre/lib/amd64/libmlib_image.so
+./jre/lib/amd64/libnet.so
+./jre/lib/amd64/libnio.so
+./jre/lib/amd64/libnpt.so
+./jre/lib/amd64/libsctp.so
+./jre/lib/amd64/libsplashscreen.so
+./jre/lib/amd64/libsunec.so
+./jre/lib/amd64/libsunwjdga.so
+./jre/lib/amd64/libt2k.so
+./jre/lib/amd64/libunpack.so
+./jre/lib/amd64/libverify.so
+./jre/lib/amd64/libzip.so
+./jre/lib/amd64/server/64/libjvm_db.so
+./jre/lib/amd64/server/64/libjvm_dtrace.so
+./bin/amd64/appletviewer
+./bin/amd64/extcheck
+./bin/amd64/idlj
+./bin/amd64/jar
+./bin/amd64/jarsigner
+./bin/amd64/java
+./bin/amd64/javac
+./bin/amd64/javadoc
+./bin/amd64/javah
+./bin/amd64/javap
+./bin/amd64/jcmd
+./bin/amd64/jconsole
+./bin/amd64/jdb
+./bin/amd64/jhat
+./bin/amd64/jinfo
+./bin/amd64/jmap
+./bin/amd64/jps
+./bin/amd64/jrunscript
+./bin/amd64/jsadebugd
+./bin/amd64/jstack
+./bin/amd64/jstat
+./bin/amd64/jstatd
+./bin/amd64/keytool
+./bin/amd64/native2ascii
+./bin/amd64/orbd
+./bin/amd64/pack200
+./bin/amd64/policytool
+./bin/amd64/rmic
+./bin/amd64/rmid
+./bin/amd64/rmiregistry
+./bin/amd64/schemagen
+./bin/amd64/serialver
+./bin/amd64/servertool
+./bin/amd64/tnameserv
+./bin/amd64/unpack200
+./bin/amd64/wsgen
+./bin/amd64/wsimport
+./bin/amd64/xjc
+./jre/bin/amd64/java
+./jre/bin/amd64/keytool
+./jre/bin/amd64/orbd
+./jre/bin/amd64/pack200
+./jre/bin/amd64/policytool
+./jre/bin/amd64/rmid
+./jre/bin/amd64/rmiregistry
+./jre/bin/amd64/servertool
+./jre/bin/amd64/tnameserv
+./jre/bin/amd64/unpack200
+./jre/lib/amd64/jexec
+"
+
+SKIP_ELF_DIFF="true"
+
+# Can't find an explaination for the diff in libmlib_image.so.
+KNOWN_DIS_DIFF="
+./jre/lib/amd64/libmlib_image.so
+"
+# libjvm.so differs in the random 15 char prefix on some symbols.
+ACCEPTED_DIS_DIFF="
+./jre/lib/amd64/server/libjvm.so
+"
+
+fi
+
+if [ "$OPENJDK_TARGET_OS" = "windows" ] && [ "$OPENJDK_TARGET_CPU" = "x86_64" ]; then
+
+ACCEPTED_BIN_DIFF="
+./bin/jli.dll
+./demo/jvmti/compiledMethodLoad/lib/compiledMethodLoad.dll
+./demo/jvmti/gctest/lib/gctest.dll
+./demo/jvmti/heapTracker/lib/heapTracker.dll
+./demo/jvmti/heapViewer/lib/heapViewer.dll
+./demo/jvmti/hprof/lib/hprof.dll
+./demo/jvmti/minst/lib/minst.dll
+./demo/jvmti/mtrace/lib/mtrace.dll
+./demo/jvmti/versionCheck/lib/versionCheck.dll
+./demo/jvmti/waiters/lib/waiters.dll
+./jre/bin/attach.dll
+./jre/bin/awt.dll
+./jre/bin/dcpr.dll
+./jre/bin/dt_shmem.dll
+./jre/bin/dt_socket.dll
+./jre/bin/fontmanager.dll
+./jre/bin/hprof.dll
+./jre/bin/instrument.dll
+./jre/bin/j2pcsc.dll
+./jre/bin/j2pkcs11.dll
+./jre/bin/jaas_nt.dll
+./jre/bin/java.dll
+./jre/bin/java_crw_demo.dll
+./jre/bin/jawt.dll
+./jre/bin/JdbcOdbc.dll
+./jre/bin/jdwp.dll
+./jre/bin/jfr.dll
+./jre/bin/jli.dll
+./jre/bin/jpeg.dll
+./jre/bin/jsdt.dll
+./jre/bin/jsound.dll
+./jre/bin/jsoundds.dll
+./jre/bin/kcms.dll
+./jre/bin/management.dll
+./jre/bin/mlib_image.dll
+./jre/bin/net.dll
+./jre/bin/nio.dll
+./jre/bin/npt.dll
+./jre/bin/sawindbg.dll
+./jre/bin/server/jvm.dll
+./jre/bin/splashscreen.dll
+./jre/bin/sunec.dll
+./jre/bin/sunmscapi.dll
+./jre/bin/t2k.dll
+./jre/bin/unpack.dll
+./jre/bin/verify.dll
+./jre/bin/w2k_lsa_auth.dll
+./jre/bin/zip.dll
+./bin/appletviewer.exe
+./bin/extcheck.exe
+./bin/idlj.exe
+./bin/jar.exe
+./bin/jarsigner.exe
+./bin/java.exe
+./bin/javac.exe
+./bin/javadoc.exe
+./bin/javah.exe
+./bin/javap.exe
+./bin/java-rmi.exe
+./bin/javaw.exe
+./bin/jcmd.exe
+./bin/jconsole.exe
+./bin/jdb.exe
+./bin/jhat.exe
+./bin/jinfo.exe
+./bin/jmap.exe
+./bin/jps.exe
+./bin/jrunscript.exe
+./bin/jsadebugd.exe
+./bin/jstack.exe
+./bin/jstat.exe
+./bin/jstatd.exe
+./bin/keytool.exe
+./bin/kinit.exe
+./bin/klist.exe
+./bin/ktab.exe
+./bin/native2ascii.exe
+./bin/orbd.exe
+./bin/pack200.exe
+./bin/policytool.exe
+./bin/rmic.exe
+./bin/rmid.exe
+./bin/rmiregistry.exe
+./bin/schemagen.exe
+./bin/serialver.exe
+./bin/servertool.exe
+./bin/tnameserv.exe
+./bin/unpack200.exe
+./bin/wsgen.exe
+./bin/wsimport.exe
+./bin/xjc.exe
+./jre/bin/java.exe
+./jre/bin/java-rmi.exe
+./jre/bin/javaw.exe
+./jre/bin/keytool.exe
+./jre/bin/kinit.exe
+./jre/bin/klist.exe
+./jre/bin/ktab.exe
+./jre/bin/orbd.exe
+./jre/bin/pack200.exe
+./jre/bin/policytool.exe
+./jre/bin/rmid.exe
+./jre/bin/rmiregistry.exe
+./jre/bin/servertool.exe
+./jre/bin/tnameserv.exe
+./jre/bin/unpack200.exe
+"
+
+KNOWN_SIZE_DIFF="
+./demo/jvmti/heapTracker/lib/heapTracker.dll
+./demo/jvmti/minst/lib/minst.dll
+./jre/bin/awt.dll
+./jre/bin/java_crw_demo.dll
+./bin/java.exe
+./bin/javaw.exe
+./bin/unpack200.exe
+./jre/bin/java.exe
+./jre/bin/javaw.exe
+./jre/bin/unpack200.exe
+"
+
+KNOWN_SYM_DIFF="
+./jre/bin/awt.dll
+./jre/bin/java_crw_demo.dll
+"
+fi
+
+
+
+if [ "$OPENJDK_TARGET_OS" = "macosx" ]; then
+ACCEPTED_JARZIP_CONTENTS="
+/META-INF/INDEX.LIST
+"
+
+KNOWN_BIN_DIFF="
+./jre/lib/libJObjC.dylib
+./jre/lib/libsaproc.dylib
+./jre/lib/server/libjvm.dylib
+"
+
+ACCEPTED_BIN_DIFF="
+./bin/appletviewer
+./bin/extcheck
+./bin/idlj
+./bin/jar
+./bin/jarsigner
+./bin/java
+./bin/javac
+./bin/javadoc
+./bin/javah
+./bin/javap
+./bin/jcmd
+./bin/jconsole
+./bin/jdb
+./bin/jhat
+./bin/jinfo
+./bin/jmap
+./bin/jps
+./bin/jrunscript
+./bin/jsadebugd
+./bin/jstack
+./bin/jstat
+./bin/jstatd
+./bin/keytool
+./bin/native2ascii
+./bin/orbd
+./bin/pack200
+./bin/policytool
+./bin/rmic
+./bin/rmid
+./bin/rmiregistry
+./bin/schemagen
+./bin/serialver
+./bin/servertool
+./bin/tnameserv
+./bin/wsgen
+./bin/wsimport
+./bin/xjc
+./jre/bin/java
+./jre/bin/keytool
+./jre/bin/orbd
+./jre/bin/pack200
+./jre/bin/policytool
+./jre/bin/rmid
+./jre/bin/rmiregistry
+./jre/bin/servertool
+./jre/bin/tnameserv
+"
+
+KNOWN_SIZE_DIFF="
+./jre/lib/libJObjC.dylib
+./jre/lib/server/libjvm.dylib
+"
+
+KNOWN_SYM_DIFF="
+./jre/lib/libJObjC.dylib
+./jre/lib/server/libjvm.dylib
+"
+
+KNOWN_ELF_DIFF="
+./jre/lib/libJObjC.dylib
+./jre/lib/server/libjvm.dylib
+"
+
+SKIP_DIS_DIFF="true"
+
+fi
+
+##########################################################################################
+# Compare text files and ignore specific differences:
+#
+# * Timestamps in Java sources generated by idl2java
+# * Sorting order and cleanup style in .properties files
+
+diff_text() {
+ OTHER_FILE=$1
+ THIS_FILE=$2
+
+ SUFFIX="${THIS_FILE##*.}"
+
+ TMP=1
+
+ if [[ "$THIS_FILE" = *"META-INF/MANIFEST.MF" ]]; then
+ TMP=$(LANG=C $DIFF $OTHER_FILE $THIS_FILE | \
+ $GREP '^[<>]' | \
+ $SED -e '/[<>] Ant-Version: Apache Ant .*/d' \
+ -e '/[<>] Created-By: .* (Oracle Corporation).*/d')
+ fi
+ if test "x$SUFFIX" = "xjava"; then
+ TMP=$(LANG=C $DIFF $OTHER_FILE $THIS_FILE | \
+ $GREP '^[<>]' | \
+ $SED -e '/[<>] \* from.*\.idl/d' \
+ -e '/[<>] \*.*[0-9]\{4\}_[0-9]\{2\}_[0-9]\{2\}_[0-9]\{2\}_[0-9]\{2\}-b[0-9]\{2\}.*/d' \
+ -e '/[<>] \*.*[0-9]\{4\} [0-9][0-9]*:[0-9]\{2\}:[0-9]\{2\}.*/d' \
+ -e '/\/\/ Generated from input file.*/d' \
+ -e '/\/\/ This file was generated AUTOMATICALLY from a template file.*/d' \
+ -e '/\/\/ java GenerateCharacter.*/d')
+ fi
+ # Ignore date strings in class files.
+ # On Macosx the system sources for generated java classes produce different output on
+ # consequtive invokations seemingly randomly.
+ # For example a method parameter randomly named "thePoint" or "aPoint". Ignore this.
+ if test "x$SUFFIX" = "xclass"; then
+ $JAVAP -c -constants -l -p ${OTHER_FILE} > ${OTHER_FILE}.javap
+ $JAVAP -c -constants -l -p ${THIS_FILE} > ${THIS_FILE}.javap
+ TMP=$($DIFF ${OTHER_FILE}.javap ${THIS_FILE}.javap | \
+ $GREP '^[<>]' | \
+ $SED -e '/[<>].*[0-9]\{4\}_[0-9]\{2\}_[0-9]\{2\}_[0-9]\{2\}_[0-9]\{2\}-b[0-9]\{2\}.*/d' \
+ -e '/[<>].*Point Lcom\/apple\/jobjc\/foundation\/NSPoint;/d' \
+ -e '/[<>].*public com\.apple\.jobjc\.Pointer<com\.apple\.jobjc\..*itemsPtr();/d' \
+ -e '/[<>].*public void setItemsPtr(com\.apple\.jobjc\.Pointer<com\.apple\.jobjc\..*);/d')
+ fi
+ if test "x$SUFFIX" = "xproperties"; then
+ $CAT $OTHER_FILE | $SED -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' -e 's/#.*/#/g' \
+ | $SED -f "$SRC_ROOT/common/bin/unicode2x.sed" \
+ | $SED -e '/^#/d' -e '/^$/d' \
+ -e :a -e '/\\$/N; s/\\\n//; ta' \
+ -e 's/^[ \t]*//;s/[ \t]*$//' \
+ -e 's/\\=/=/' | LANG=C $SORT > $OTHER_FILE.cleaned
+ TMP=$(LANG=C $DIFF $OTHER_FILE.cleaned $THIS_FILE)
+ fi
+ if test -n "$TMP"; then
+ echo Files $OTHER_FILE and $THIS_FILE differ
+ return 1
+ fi
+
+ return 0
+}
+
+##########################################################################################
+# Compare directory structure
+
+compare_dirs() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ mkdir -p $WORK_DIR
+
+ (cd $OTHER_DIR && $FIND . -type d | $SORT > $WORK_DIR/other_dirs)
+ (cd $THIS_DIR && $FIND . -type d | $SORT > $WORK_DIR/this_dirs)
+
+ echo -n Directory structure...
+ if $DIFF $WORK_DIR/other_dirs $WORK_DIR/this_dirs > /dev/null; then
+ echo Identical!
+ else
+ echo Differences found.
+ REGRESSIONS=true
+ # Differences in directories found.
+ ONLY_OTHER=$($DIFF $WORK_DIR/other_dirs $WORK_DIR/this_dirs | $GREP '<')
+ if [ "$ONLY_OTHER" ]; then
+ echo Only in $OTHER
+ echo $ONLY_OTHER | $SED 's|< ./|\t|g' | $SED 's/ /\n/g'
+ fi
+ # Differences in directories found.
+ ONLY_THIS=$($DIFF $WORK_DIR/other_dirs $WORK_DIR/this_dirs | $GREP '>')
+ if [ "$ONLY_THIS" ]; then
+ echo Only in $THIS
+ echo $ONLY_THIS | $SED 's|> ./|\t|g' | $SED 's/ /\n/g'
+ fi
+ fi
+}
+
+
+##########################################################################################
+# Compare file structure
+
+compare_files() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ mkdir -p $WORK_DIR
+
+ (cd $OTHER_DIR && $FIND . -type f | $SORT > $WORK_DIR/other_files)
+ (cd $THIS_DIR && $FIND . -type f | $SORT > $WORK_DIR/this_files)
+
+ echo -n File names...
+ if diff $WORK_DIR/other_files $WORK_DIR/this_files > /dev/null; then
+ echo Identical!
+ else
+ echo Differences found.
+ REGRESSIONS=true
+ # Differences in directories found.
+ ONLY_OTHER=$(diff $WORK_DIR/other_files $WORK_DIR/this_files | $GREP '<')
+ if [ "$ONLY_OTHER" ]; then
+ echo Only in $OTHER
+ echo "$ONLY_OTHER" | sed 's|< ./| |g'
+ fi
+ # Differences in directories found.
+ ONLY_THIS=$(diff $WORK_DIR/other_files $WORK_DIR/this_files | $GREP '>')
+ if [ "$ONLY_THIS" ]; then
+ echo Only in $THIS
+ echo "$ONLY_THIS" | sed 's|> ./| |g'
+ fi
+ fi
+}
+
+
+##########################################################################################
+# Compare permissions
+
+compare_permissions() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ mkdir -p $WORK_DIR
+
+ echo -n Permissions...
+ found=""
+ for f in `cd $OTHER_DIR && $FIND . -type f`
+ do
+ if [ ! -f ${OTHER_DIR}/$f ]; then continue; fi
+ if [ ! -f ${THIS_DIR}/$f ]; then continue; fi
+ OP=`ls -l ${OTHER_DIR}/$f | awk '{printf("%.10s\n", $1);}'`
+ TP=`ls -l ${THIS_DIR}/$f | awk '{printf("%.10s\n", $1);}'`
+ if [ "$OP" != "$TP" ]
+ then
+ if [ -z "$found" ]; then echo ; found="yes"; fi
+ $PRINTF "\told: ${OP} new: ${TP}\t$f\n"
+ fi
+ done
+ if [ -z "$found" ]; then
+ echo "Identical!"
+ else
+ REGRESSIONS=true
+ fi
+}
+
+##########################################################################################
+# Compare file command output
+
+compare_file_types() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ $MKDIR -p $WORK_DIR
+
+ echo -n File types...
+ found=""
+ for f in `cd $OTHER_DIR && $FIND . -type f`
+ do
+ if [ ! -f ${OTHER_DIR}/$f ]; then continue; fi
+ if [ ! -f ${THIS_DIR}/$f ]; then continue; fi
+ OF=`cd ${OTHER_DIR} && $FILE $f`
+ TF=`cd ${THIS_DIR} && $FILE $f`
+ if [ "$f" = "./src.zip" ] || [ "$f" = "./jre/lib/JObjC.jar" ] || [ "$f" = "./lib/JObjC.jar" ]
+ then
+ if [ "`echo $OF | $GREP -ic zip`" -gt 0 -a "`echo $TF | $GREP -ic zip`" -gt 0 ]
+ then
+ # the way we produces zip-files make it so that directories are stored in old file
+ # but not in new (only files with full-path)
+ # this makes file-5.09 report them as different
+ continue;
+ fi
+ fi
+
+ if [ "$OF" != "$TF" ]
+ then
+ if [ -z "$found" ]; then echo ; found="yes"; fi
+ $PRINTF "\tother: ${OF}\n\tthis : ${TF}\n"
+ fi
+ done
+ if [ -z "$found" ]; then
+ echo "Identical!"
+ else
+ REGRESSIONS=true
+ fi
+}
+
+##########################################################################################
+# Compare the rest of the files
+
+compare_general_files() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ GENERAL_FILES=$(cd $THIS_DIR && $FIND . -type f ! -name "*.so" ! -name "*.jar" ! -name "*.zip" \
+ ! -name "*.debuginfo" ! -name "*.dylib" ! -name "jexec" \
+ ! -name "ct.sym" ! -name "*.diz" ! -name "*.dll" \
+ ! -name "*.pdb" ! -name "*.exp" ! -name "*.ilk" \
+ ! -name "*.lib" \
+ | $GREP -v "./bin/" | $SORT | $FILTER)
+
+ echo General files...
+ for f in $GENERAL_FILES
+ do
+ if [ -e $OTHER_DIR/$f ]; then
+ DIFF_OUT=$($DIFF $OTHER_DIR/$f $THIS_DIR/$f 2>&1)
+ if [ -n "$DIFF_OUT" ]; then
+ echo $f
+ REGRESSIONS=true
+ if [ "$SHOW_DIFFS" = "true" ]; then
+ echo "$DIFF_OUT"
+ fi
+ fi
+ fi
+ done
+
+
+}
+
+##########################################################################################
+# Compare zip file
+
+compare_zip_file() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+ ZIP_FILE=$4
+
+ THIS_ZIP=$THIS_DIR/$ZIP_FILE
+ OTHER_ZIP=$OTHER_DIR/$ZIP_FILE
+
+ THIS_SUFFIX="${THIS_ZIP##*.}"
+ OTHER_SUFFIX="${OTHER_ZIP##*.}"
+ if [ "$THIS_SUFFIX" != "$OTHER_SUFFIX" ]; then
+ echo The files do not have the same suffix type!
+ return 2
+ fi
+
+ UNARCHIVE="$UNZIP -q"
+
+ TYPE="$THIS_SUFFIX"
+
+ if $CMP $OTHER_ZIP $THIS_ZIP > /dev/null
+ then
+ return 0
+ fi
+ # Not quite identical, the might still contain the same data.
+ # Unpack the jar/zip files in temp dirs
+
+ THIS_UNZIPDIR=$WORK_DIR/$ZIP_FILE.this
+ OTHER_UNZIPDIR=$WORK_DIR/$ZIP_FILE.other
+ $RM -rf $THIS_UNZIPDIR $OTHER_UNZIPDIR
+ $MKDIR -p $THIS_UNZIPDIR
+ $MKDIR -p $OTHER_UNZIPDIR
+ (cd $THIS_UNZIPDIR && $UNARCHIVE $THIS_ZIP)
+ (cd $OTHER_UNZIPDIR && $UNARCHIVE $OTHER_ZIP)
+
+ CONTENTS_DIFF_FILE=$WORK_DIR/$ZIP_FILE.diff
+ LANG=C $DIFF -rq $OTHER_UNZIPDIR $THIS_UNZIPDIR > $CONTENTS_DIFF_FILE
+
+ ONLY_OTHER=$($GREP "^Only in $OTHER_UNZIPDIR" $CONTENTS_DIFF_FILE)
+ ONLY_THIS=$($GREP "^Only in $THIS_UNZIPDIR" $CONTENTS_DIFF_FILE)
+
+ return_value=0
+
+ if [ -n "$ONLY_OTHER" ]; then
+ echo " Only OTHER $ZIP_FILE contains:"
+ echo "$ONLY_OTHER" | sed "s|Only in $OTHER_UNZIPDIR| |"g | sed 's|: |/|g'
+ return_value=1
+ fi
+
+ if [ -n "$ONLY_THIS" ]; then
+ echo " Only THIS $ZIP_FILE contains:"
+ echo "$ONLY_THIS" | sed "s|Only in $THIS_UNZIPDIR| |"g | sed 's|: |/|g'
+ return_value=1
+ fi
+
+ DIFFING_FILES=$($GREP differ $CONTENTS_DIFF_FILE | $CUT -f 2 -d ' ' | $SED "s|$OTHER_UNZIPDIR/||g")
+
+ $RM -f $WORK_DIR/$ZIP_FILE.diffs
+ for file in $DIFFING_FILES; do
+ if [[ "$ACCEPTED_JARZIP_CONTENTS" != *"$file"* ]]; then
+ diff_text $OTHER_UNZIPDIR/$file $THIS_UNZIPDIR/$file >> $WORK_DIR/$ZIP_FILE.diffs
+ fi
+ done
+
+ if [ -s "$WORK_DIR/$ZIP_FILE.diffs" ]; then
+ return_value=1
+ echo " Differing files in $ZIP_FILE"
+ $CAT $WORK_DIR/$ZIP_FILE.diffs | $GREP differ | cut -f 2 -d ' ' | \
+ $SED "s|$OTHER_UNZIPDIR| |g" > $WORK_DIR/$ZIP_FILE.difflist
+ $CAT $WORK_DIR/$ZIP_FILE.difflist
+
+ if [ -n "$SHOW_DIFFS" ]; then
+ for i in $(cat $WORK_DIR/$ZIP_FILE.difflist) ; do
+ if [ -f "${OTHER_UNZIPDIR}/$i.javap" ]; then
+ LANG=C $DIFF ${OTHER_UNZIPDIR}/$i.javap ${THIS_UNZIPDIR}/$i.javap
+ elif [ -f "${OTHER_UNZIPDIR}/$i.cleaned" ]; then
+ LANG=C $DIFF ${OTHER_UNZIPDIR}/$i.cleaned ${THIS_UNZIPDIR}/$i
+ else
+ LANG=C $DIFF ${OTHER_UNZIPDIR}/$i ${THIS_UNZIPDIR}/$i
+ fi
+ done
+ fi
+ fi
+
+ return $return_value
+}
+
+
+##########################################################################################
+# Compare all zip files
+
+compare_all_zip_files() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ ZIPS=$(cd $THIS_DIR && $FIND . -type f -name "*.zip" | $SORT | $FILTER )
+
+ if [ -n "$ZIPS" ]; then
+ echo Zip files...
+
+ return_value=0
+ for f in $ZIPS; do
+ if [ -f "$OTHER_DIR/$f" ]; then
+ compare_zip_file $THIS_DIR $OTHER_DIR $WORK_DIR $f
+ if [ "$?" != "0" ]; then
+ return_value=1
+ REGRESSIONS=true
+ fi
+ fi
+ done
+ fi
+
+ return $return_value
+}
+
+##########################################################################################
+# Compare all jar files
+
+compare_all_jar_files() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ # TODO filter?
+ ZIPS=$(cd $THIS_DIR && $FIND . -type f -name "*.jar" | $SORT | $FILTER)
+
+ if [ -n "$ZIPS" ]; then
+ echo Jar files...
+
+ return_value=0
+ for f in $ZIPS; do
+ if [ -f "$OTHER_DIR/$f" ]; then
+ compare_zip_file $THIS_DIR $OTHER_DIR $WORK_DIR $f
+ if [ "$?" != "0" ]; then
+ return_value=1
+ REGRESSIONS=true
+ fi
+ fi
+ done
+ fi
+
+ return $return_value
+}
+
+##########################################################################################
+# Compare binary (executable/library) file
+
+compare_bin_file() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+ BIN_FILE=$4
+
+ THIS_FILE=$THIS_DIR/$BIN_FILE
+ OTHER_FILE=$OTHER_DIR/$BIN_FILE
+ NAME=$(basename $BIN_FILE)
+ WORK_FILE_BASE=$WORK_DIR/$BIN_FILE
+ FILE_WORK_DIR=$(dirname $WORK_FILE_BASE)
+
+ $MKDIR -p $FILE_WORK_DIR
+
+ ORIG_THIS_FILE="$THIS_FILE"
+ ORIG_OTHER_FILE="$OTHER_FILE"
+
+ if [[ "$STRIP_BEFORE_COMPARE" = *"$BIN_FILE"* ]]; then
+ THIS_STRIPPED_FILE=$FILE_WORK_DIR/this/$NAME
+ OTHER_STRIPPED_FILE=$FILE_WORK_DIR/other/$NAME
+ $MKDIR -p $FILE_WORK_DIR/this $FILE_WORK_DIR/other
+ $CP $THIS_FILE $THIS_STRIPPED_FILE
+ $CP $OTHER_FILE $OTHER_STRIPPED_FILE
+ $STRIP $THIS_STRIPPED_FILE
+ $STRIP $OTHER_STRIPPED_FILE
+ THIS_FILE="$THIS_STRIPPED_FILE"
+ OTHER_FILE="$OTHER_STRIPPED_FILE"
+ fi
+
+ if [ -z "$SKIP_BIN_DIFF" ]; then
+ if cmp $OTHER_FILE $THIS_FILE > /dev/null; then
+ # The files were bytewise identical.
+ if [ -n "$VERBOSE" ]; then
+ echo " : : : : : $BIN_FILE"
+ fi
+ return 0
+ fi
+ BIN_MSG=" diff "
+ if [[ "$ACCEPTED_BIN_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_BIN=true
+ if [[ "$KNOWN_BIN_DIFF" != *"$BIN_FILE"* ]]; then
+ BIN_MSG="*$BIN_MSG*"
+ REGRESSIONS=true
+ else
+ BIN_MSG=" $BIN_MSG "
+ fi
+ else
+ BIN_MSG="($BIN_MSG)"
+ DIFF_BIN=
+ fi
+ fi
+
+ THIS_SIZE=$(ls -l "$THIS_FILE" | awk '{ print $5 }')
+ OTHER_SIZE=$(ls -l "$OTHER_FILE" | awk '{ print $5 }')
+ if [ $THIS_SIZE -ne $OTHER_SIZE ]; then
+ DIFF_SIZE_NUM=$($EXPR $THIS_SIZE - $OTHER_SIZE)
+ DIFF_SIZE_REL=$($EXPR $THIS_SIZE \* 100 / $OTHER_SIZE)
+ SIZE_MSG=$($PRINTF "%3d%% %4d" $DIFF_SIZE_REL $DIFF_SIZE_NUM)
+ if [[ "$ACCEPTED_SMALL_SIZE_DIFF" = *"$BIN_FILE"* ]] && [ "$DIFF_SIZE_REL" -gt 98 ] && [ "$DIFF_SIZE_REL" -lt 102 ]; then
+ SIZE_MSG="($SIZE_MSG)"
+ DIFF_SIZE=
+ else
+ if [[ "$ACCEPTED_SIZE_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_SIZE=true
+ if [[ "$KNOWN_SIZE_DIFF" != *"$BIN_FILE"* ]]; then
+ SIZE_MSG="*$SIZE_MSG*"
+ REGRESSIONS=true
+ else
+ SIZE_MSG=" $SIZE_MSG "
+ fi
+ else
+ SIZE_MSG="($SIZE_MSG)"
+ DIFF_SIZE=
+ fi
+ fi
+ else
+ SIZE_MSG=" "
+ DIFF_SIZE=
+ if [[ "$KNOWN_SIZE_DIFF $ACCEPTED_SIZE_DIFF" = *"$BIN_FILE"* ]]; then
+ SIZE_MSG=" ! "
+ fi
+ fi
+
+ if [[ "$SORT_SYMBOLS" = *"$BIN_FILE"* ]]; then
+ SYM_SORT_CMD="sort"
+ else
+ SYM_SORT_CMD="cat"
+ fi
+
+ # Check symbols
+ if [ "$OPENJDK_TARGET_OS" = "windows" ]; then
+ $DUMPBIN -exports $OTHER_FILE | $GREP " = " | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.other
+ $DUMPBIN -exports $THIS_FILE | $GREP " = " | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.this
+ elif [ "$OPENJDK_TARGET_OS" = "solaris" ]; then
+ # Some symbols get seemingly random 15 character prefixes. Filter them out.
+ $NM -a $ORIG_OTHER_FILE | $GREP -v $NAME | $AWK '{print $2, $3, $4, $5}' | $SED 's/^\([a-zA-Z] \.\)[a-zA-Z0-9_\$]\{15,15\}\./\1./g' | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.other
+ $NM -a $ORIG_THIS_FILE | $GREP -v $NAME | $AWK '{print $2, $3, $4, $5}' | $SED 's/^\([a-zA-Z] \.\)[a-zA-Z0-9_\$]\{15,15\}\./\1./g' | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.this
+ else
+ $NM -a $ORIG_OTHER_FILE | $GREP -v $NAME | $AWK '{print $2, $3, $4, $5}' | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.other
+ $NM -a $ORIG_THIS_FILE | $GREP -v $NAME | $AWK '{print $2, $3, $4, $5}' | $SYM_SORT_CMD > $WORK_FILE_BASE.symbols.this
+ fi
+
+ LANG=C $DIFF $WORK_FILE_BASE.symbols.other $WORK_FILE_BASE.symbols.this > $WORK_FILE_BASE.symbols.diff
+ if [ -s $WORK_FILE_BASE.symbols.diff ]; then
+ SYM_MSG=" diff "
+ if [[ "$ACCEPTED_SYM_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_SYM=true
+ if [[ "$KNOWN_SYM_DIFF" != *"$BIN_FILE"* ]]; then
+ SYM_MSG="*$SYM_MSG*"
+ REGRESSIONS=true
+ else
+ SYM_MSG=" $SYM_MSG "
+ fi
+ else
+ SYM_MSG="($SYM_MSG)"
+ DIFF_SYM=
+ fi
+ else
+ SYM_MSG=" "
+ DIFF_SYM=
+ if [[ "$KNOWN_SYM_DIFF $ACCEPTED_SYM_DIFF" = *"$BIN_FILE"* ]]; then
+ SYM_MSG=" ! "
+ fi
+ fi
+
+ # Check dependencies
+ if [ -n "$LDD_CMD" ];then
+ (cd $FILE_WORK_DIR && $CP $OTHER_FILE . && $LDD_CMD $NAME | $AWK '{ print $1;}' | $SORT | $TEE $WORK_FILE_BASE.deps.other | $UNIQ > $WORK_FILE_BASE.deps.other.uniq)
+ (cd $FILE_WORK_DIR && $CP $THIS_FILE . && $LDD_CMD $NAME | $AWK '{ print $1;}' | $SORT | $TEE $WORK_FILE_BASE.deps.this | $UNIQ > $WORK_FILE_BASE.deps.this.uniq)
+ (cd $FILE_WORK_DIR && $RM -f $NAME)
+
+ LANG=C $DIFF $WORK_FILE_BASE.deps.other $WORK_FILE_BASE.deps.this > $WORK_FILE_BASE.deps.diff
+ LANG=C $DIFF $WORK_FILE_BASE.deps.other.uniq $WORK_FILE_BASE.deps.this.uniq > $WORK_FILE_BASE.deps.diff.uniq
+
+ if [ -s $WORK_FILE_BASE.deps.diff ]; then
+ if [ -s $WORK_FILE_BASE.deps.diff.uniq ]; then
+ DEP_MSG=" diff "
+ else
+ DEP_MSG=" redun "
+ fi
+ if [[ "$ACCEPTED_DEP_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_DEP=true
+ if [[ "$KNOWN_DEP_DIFF" != *"$BIN_FILE"* ]]; then
+ DEP_MSG="*$DEP_MSG*"
+ REGRESSIONS=true
+ else
+ DEP_MSG=" $DEP_MSG "
+ fi
+ else
+ DEP_MSG="($DEP_MSG)"
+ DIFF_DEP=
+ fi
+ else
+ DEP_MSG=" "
+ DIFF_DEP=
+ if [[ "$KNOWN_DEP_DIFF $ACCEPTED_DEP_DIFF" = *"$BIN_FILE"* ]]; then
+ DEP_MSG=" ! "
+ fi
+ fi
+ fi
+
+ # Compare readelf output
+ if [ -n "$READELF_CMD" ] && [ -z "$SKIP_ELF_DIFF" ]; then
+ $READELF_CMD $OTHER_FILE > $WORK_FILE_BASE.readelf.other 2>&1
+ $READELF_CMD $THIS_FILE > $WORK_FILE_BASE.readelf.this 2>&1
+
+ LANG=C $DIFF $WORK_FILE_BASE.readelf.other $WORK_FILE_BASE.readelf.this > $WORK_FILE_BASE.readelf.diff
+
+ if [ -s $WORK_FILE_BASE.readelf.diff ]; then
+ ELF_DIFF_SIZE=$(ls -n $WORK_FILE_BASE.readelf.diff | awk '{print $5}')
+ ELF_MSG=$($PRINTF "%8d" $ELF_DIFF_SIZE)
+ if [[ "$ACCEPTED_ELF_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_ELF=true
+ if [[ "$KNOWN_ELF_DIFF" != *"$BIN_FILE"* ]]; then
+ ELF_MSG="*$ELF_MSG*"
+ REGRESSIONS=true
+ else
+ ELF_MSG=" $ELF_MSG "
+ fi
+ else
+ ELF_MSG="($ELF_MSG)"
+ DIFF_ELF=
+ fi
+ else
+ ELF_MSG=" "
+ DIFF_ELF=
+ if [[ "$KNOWN_DEP_DIFF $ACCEPTED_DEP_DIFF" = *"$BIN_FILE"* ]]; then
+ ELF_MSG=" ! "
+ fi
+ fi
+ fi
+
+ # Compare disassemble output
+ if [ -f "$OBJDUMP" ] && [ -z "$SKIP_DIS_DIFF" ]; then
+ $OBJDUMP -d $OTHER_FILE | $GREP -v $NAME > $WORK_FILE_BASE.dis.other 2>&1
+ $OBJDUMP -d $THIS_FILE | $GREP -v $NAME > $WORK_FILE_BASE.dis.this 2>&1
+
+ LANG=C $DIFF $WORK_FILE_BASE.dis.other $WORK_FILE_BASE.dis.this > $WORK_FILE_BASE.dis.diff
+
+ if [ -s $WORK_FILE_BASE.dis.diff ]; then
+ DIS_DIFF_SIZE=$(ls -n $WORK_FILE_BASE.dis.diff | awk '{print $5}')
+ DIS_MSG=$($PRINTF "%8d" $DIS_DIFF_SIZE)
+ if [[ "$ACCEPTED_DIS_DIFF" != *"$BIN_FILE"* ]]; then
+ DIFF_DIS=true
+ if [[ "$KNOWN_DIS_DIFF" != *"$BIN_FILE"* ]]; then
+ DIS_MSG="*$DIS_MSG*"
+ REGRESSIONS=true
+ else
+ DIS_MSG=" $DIS_MSG "
+ fi
+ else
+ DIS_MSG="($DIS_MSG)"
+ DIFF_DIS=
+ fi
+ else
+ DIS_MSG=" "
+ DIFF_DIS=
+ if [[ "$KNOWN_DEP_DIFF $ACCEPTED_DEP_DIFF" = *"$BIN_FILE"* ]]; then
+ DIS_MSG=" ! "
+ fi
+ fi
+ fi
+
+
+ if [ -n "$DIFF_BIN$DIFF_SIZE$DIFF_SYM$DIFF_DEP$DIFF_ELF$DIFF_DIS" ] || [ -n "$VERBOSE" ]; then
+ if [ -n "$BIN_MSG" ]; then echo -n "$BIN_MSG:"; fi
+ if [ -n "$SIZE_MSG" ]; then echo -n "$SIZE_MSG:"; fi
+ if [ -n "$SYM_MSG" ]; then echo -n "$SYM_MSG:"; fi
+ if [ -n "$DEP_MSG" ]; then echo -n "$DEP_MSG:"; fi
+ if [ -n "$ELF_MSG" ]; then echo -n "$ELF_MSG:"; fi
+ if [ -n "$DIS_MSG" ]; then echo -n "$DIS_MSG:"; fi
+ echo " $BIN_FILE"
+ if [ "$SHOW_DIFFS" = "true" ]; then
+ if [ -s "$WORK_FILE_BASE.symbols.diff" ]; then
+ echo "Symbols diff:"
+ $CAT $WORK_FILE_BASE.symbols.diff
+ fi
+ if [ -s "$WORK_FILE_BASE.deps.diff" ]; then
+ echo "Deps diff:"
+ $CAT $WORK_FILE_BASE.deps.diff
+ fi
+ if [ -s "$WORK_FILE_BASE.readelf.diff" ]; then
+ echo "Readelf diff:"
+ $CAT $WORK_FILE_BASE.readelf.diff
+ fi
+ if [ -s "$WORK_FILE_BASE.dis.diff" ]; then
+ echo "Disassembly diff:"
+ $CAT $WORK_FILE_BASE.dis.diff
+ fi
+ fi
+ return 1
+ fi
+ return 0
+}
+
+##########################################################################################
+# Print binary diff header
+
+print_binary_diff_header() {
+ if [ -z "$SKIP_BIN_DIFF" ]; then echo -n " Binary :"; fi
+ if [ -z "$SKIP_SIZE_DIFF" ]; then echo -n " Size :"; fi
+ if [ -z "$SKIP_SYM_DIFF" ]; then echo -n " Symbols :"; fi
+ if [ -z "$SKIP_DEP_DIFF" ]; then echo -n " Deps :"; fi
+ if [ -z "$SKIP_ELF_DIFF" ]; then echo -n " Readelf :"; fi
+ if [ -z "$SKIP_DIS_DIFF" ]; then echo -n " Disass :"; fi
+ echo
+}
+
+##########################################################################################
+# Compare all libraries
+
+compare_all_libs() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ LIBS=$(cd $THIS_DIR && $FIND . -name 'lib*.so' -o -name '*.dylib' -o -name '*.dll' | $SORT | $FILTER)
+
+ if [ -n "$LIBS" ]; then
+ echo Libraries...
+ print_binary_diff_header
+ for l in $LIBS; do
+ if [ -f "$OTHER_DIR/$l" ]; then
+ compare_bin_file $THIS_DIR $OTHER_DIR $WORK_DIR $l
+ if [ "$?" != "0" ]; then
+ return_value=1
+ fi
+ fi
+ done
+ fi
+
+ return $return_value
+}
+
+##########################################################################################
+# Compare all executables
+
+compare_all_execs() {
+ THIS_DIR=$1
+ OTHER_DIR=$2
+ WORK_DIR=$3
+
+ if [ "$OPENJDK_TARGET_OS" = "windows" ]; then
+ EXECS=$(cd $THIS_DIR && $FIND . -type f -name '*.exe' | $SORT | $FILTER)
+ else
+ EXECS=$(cd $THIS_DIR && $FIND . -name db -prune -o -type f -perm -100 \! \( -name '*.so' -o -name '*.dylib' -o -name '*.dll' -o -name '*.cgi' \) | $SORT | $FILTER)
+ fi
+
+ if [ -n "$EXECS" ]; then
+ echo Executables...
+ print_binary_diff_header
+ for e in $EXECS; do
+ if [ -f "$OTHER_DIR/$e" ]; then
+ compare_bin_file $THIS_DIR $OTHER_DIR $WORK_DIR $e
+ if [ "$?" != "0" ]; then
+ return_value=1
+ fi
+ fi
+ done
+ fi
+
+ return $return_value
+}
+
+##########################################################################################
+# Initiate configuration
+
+COMPARE_ROOT=/tmp/cimages.$USER
+$MKDIR -p $COMPARE_ROOT
+if [ "$OPENJDK_TARGET_OS" = "windows" ]; then
+ if [ "$(uname -o)" = "Cygwin" ]; then
+ COMPARE_ROOT=$(cygpath -msa $COMPARE_ROOT)
+ fi
+fi
+
+THIS="$( cd "$( dirname "$0" )" && pwd )"
+echo "$THIS"
+THIS_SCRIPT="$0"
+
+if [ -z "$1" ] || [ "$1" = "-h" ] || [ "$1" = "-?" ] || [ "$1" = "/h" ] || [ "$1" = "/?" ] || [ "$1" = "-help" ] || [ "$1" = "--help" ]; then
+ echo "bash ./compare.sh [OPTIONS] [FILTER]"
+ echo ""
+ echo "-all Compare all files in all known ways"
+ echo "-names Compare the file names and directory structure"
+ echo "-perms Compare the permission bits on all files and directories"
+ echo "-types Compare the output of the file command on all files"
+ echo "-general Compare the files not convered by the specialized comparisons"
+ echo "-zips Compare the contents of all zip files"
+ echo "-jars Compare the contents of all jar files"
+ echo "-libs Compare all native libraries"
+ echo "-execs Compare all executables"
+ echo "-v Verbose output, does not hide known differences"
+ echo "-vv More verbose output, shows diff output of all comparisons"
+ echo "-o [OTHER] Compare with build in other directory. Will default to the old build directory"
+ echo ""
+ echo "[FILTER] List filenames in the image to compare, works for jars, zips, libs and execs"
+ echo "Example:"
+ echo "bash ./common/bin/compareimages.sh CodePointIM.jar"
+ exit 10
+fi
+
+CMP_NAMES=false
+CMP_PERMS=false
+CMP_TYPES=false
+CMP_GENERAL=false
+CMP_ZIPS=false
+CMP_JARS=false
+CMP_LIBS=false
+CMP_EXECS=false
+
+while [ -n "$1" ]; do
+ case "$1" in
+ -v)
+ VERBOSE=true
+ ;;
+ -vv)
+ VERBOSE=true
+ SHOW_DIFFS=true
+ ;;
+ -o)
+ OTHER=$2
+ shift
+ ;;
+ -all)
+ CMP_NAMES=true
+ if [ "$OPENJDK_TARGET_OS" != "windows" ]; then
+ CMP_PERMS=true
+ fi
+ CMP_TYPES=true
+ CMP_GENERAL=true
+ CMP_ZIPS=true
+ CMP_JARS=true
+ CMP_LIBS=true
+ CMP_EXECS=true
+ ;;
+ -names)
+ CMP_NAMES=true
+ ;;
+ -perms)
+ CMP_PERMS=true
+ ;;
+ -types)
+ CMP_TYPES=true
+ ;;
+ -general)
+ CMP_GENERAL=true
+ ;;
+ -zips)
+ CMP_ZIPS=true
+ ;;
+ -jars)
+ CMP_JARS=true
+ ;;
+ -libs)
+ CMP_LIBS=true
+ ;;
+ -execs)
+ CMP_EXECS=true
+ ;;
+ *)
+ CMP_NAMES=false
+ CMP_PERMS=false
+ CMP_TYPES=false
+ CMP_ZIPS=true
+ CMP_JARS=true
+ CMP_LIBS=true
+ CMP_EXECS=true
+
+ if [ -z "$FILTER" ]; then
+ FILTER="$GREP"
+ fi
+ FILTER="$FILTER -e $1"
+ ;;
+ esac
+ shift
+done
+
+if [ "$CMP_NAMES" = "false" ] && [ "$CMP_TYPES" = "false" ] && [ "$CMP_PERMS" = "false" ] && [ "$CMP_GENERAL" = "false" ] && [ "$CMP_ZIPS" = "false" ] && [ "$CMP_JARS" = "false" ] && [ "$CMP_LIBS" = "false" ] && [ "$CMP_EXECS" = "false" ]; then
+ CMP_NAMES=true
+ CMP_PERMS=true
+ CMP_TYPES=true
+ CMP_GENERAL=true
+ CMP_ZIPS=true
+ CMP_JARS=true
+ CMP_LIBS=true
+ CMP_EXECS=true
+fi
+
+if [ -z "$FILTER" ]; then
+ FILTER="$CAT"
+fi
+
+if [ -z "$OTHER" ]; then
+ OTHER="$THIS/../$LEGACY_BUILD_DIR"
+ if [ -d "$OTHER" ]; then
+ OTHER="$( cd "$OTHER" && pwd )"
+ else
+ echo "Default old build directory does not exist:"
+ echo "$OTHER"
+ fi
+ echo "Comparing to default old build:"
+ echo "$OTHER"
+ echo
+else
+ echo "Comparing to:"
+ echo "$OTHER"
+ echo
+fi
+
+if [ ! -d "$OTHER" ]; then
+ echo "Other build directory does not exist:"
+ echo "$OTHER"
+ exit 1;
+fi
+
+# Figure out the layout of the new build. Which kinds of images have been produced
+if [ -d "$THIS/images/j2sdk-image" ]; then
+ THIS_J2SDK="$THIS/images/j2sdk-image"
+ THIS_J2RE="$THIS/images/j2re-image"
+fi
+if [ -d "$THIS/images/j2sdk-overlay-image" ]; then
+ THIS_J2SDK_OVERLAY="$THIS/images/j2sdk-overlay-image"
+ THIS_J2RE_OVERLAY="$THIS/images/j2re-overlay-image"
+fi
+
+# Figure out the layout of the other build (old or new, normal or overlay image)
+if [ -d "$OTHER/j2sdk-image" ]; then
+ if [ -f "$OTHER/j2sdk-image/LICENSE" ]; then
+ OTHER_J2SDK="$OTHER/j2sdk-image"
+ OTHER_J2RE="$OTHER/j2re-image"
+ else
+ OTHER_J2SDK_OVERLAY="$OTHER/j2sdk-image"
+ OTHER_J2RE_OVERLAY="$OTHER/j2re-image"
+ fi
+
+fi
+
+if [ -z "$OTHER_J2SDK" ] && [ -n "$OTHER_J2SDK_OVERLAY" ] && [ -z "$THIS_J2SDK_OVERLAY" ]; then
+ echo "OTHER build only has an overlay image while this build does not. Nothing to compare!"
+ exit 1
+fi
+
+
+##########################################################################################
+# Do the work
+
+if [ "$CMP_NAMES" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ echo -n "J2SDK "
+ compare_dirs $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ echo -n "J2RE "
+ compare_dirs $THIS_J2RE $OTHER_J2RE $COMPARE_ROOT/j2re
+
+ echo -n "J2SDK "
+ compare_files $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ echo -n "J2RE "
+ compare_files $THIS_J2RE $OTHER_J2RE $COMPARE_ROOT/j2re
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "J2SDK Overlay "
+ compare_dirs $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ echo -n "J2RE Overlay "
+ compare_dirs $THIS_J2RE_OVERLAY $OTHER_J2RE_OVERLAY $COMPARE_ROOT/j2re-overlay
+
+ echo -n "J2SDK Overlay "
+ compare_files $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ echo -n "J2RE Overlay "
+ compare_files $THIS_J2RE_OVERLAY $OTHER_J2RE_OVERLAY $COMPARE_ROOT/j2re-overlay
+ fi
+fi
+
+if [ "$CMP_PERMS" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ echo -n "J2SDK "
+ compare_permissions $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ echo -n "J2RE "
+ compare_permissions $THIS_J2RE $OTHER_J2RE $COMPARE_ROOT/j2re
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "J2SDK Overlay "
+ compare_permissions $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ echo -n "J2RE Overlay "
+ compare_permissions $THIS_J2RE_OVERLAY $OTHER_J2RE_OVERLAY $COMPARE_ROOT/j2re-overlay
+ fi
+fi
+
+if [ "$CMP_TYPES" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ echo -n "J2SDK "
+ compare_file_types $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ echo -n "J2RE "
+ compare_file_types $THIS_J2RE $OTHER_J2RE $COMPARE_ROOT/j2re
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "J2SDK Overlay "
+ compare_file_types $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ echo -n "J2RE Overlay "
+ compare_file_types $THIS_J2RE_OVERLAY $OTHER_J2RE_OVERLAY $COMPARE_ROOT/j2re-overlay
+ fi
+fi
+
+if [ "$CMP_GENERAL" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ echo -n "J2SDK "
+ compare_general_files $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ echo -n "J2RE "
+ compare_general_files $THIS_J2RE $OTHER_J2RE $COMPARE_ROOT/j2re
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "J2SDK Overlay "
+ compare_general_files $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ echo -n "J2RE Overlay "
+ compare_general_files $THIS_J2RE_OVERLAY $OTHER_J2RE_OVERLAY $COMPARE_ROOT/j2re-overlay
+ fi
+fi
+
+if [ "$CMP_ZIPS" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ compare_all_zip_files $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ fi
+fi
+
+if [ "$CMP_JARS" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ compare_all_jar_files $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ fi
+fi
+
+if [ "$CMP_LIBS" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ compare_all_libs $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "Overlay "
+ compare_all_libs $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ fi
+fi
+
+if [ "$CMP_EXECS" = "true" ]; then
+ if [ -n "$THIS_J2SDK" ] && [ -n "$OTHER_J2SDK" ]; then
+ compare_all_execs $THIS_J2SDK $OTHER_J2SDK $COMPARE_ROOT/j2sdk
+ fi
+ if [ -n "$THIS_J2SDK_OVERLAY" ] && [ -n "$OTHER_J2SDK_OVERLAY" ]; then
+ echo -n "Overlay "
+ compare_all_execs $THIS_J2SDK_OVERLAY $OTHER_J2SDK_OVERLAY $COMPARE_ROOT/j2sdk-overlay
+ fi
+fi
+
+echo
+
+if [ -n "$REGRESSIONS" ]; then
+ echo "REGRESSIONS FOUND!"
+ echo
+ exit 1
+else
+ echo "No regressions found"
+ echo
+ exit 0
+fi
--- a/common/autoconf/configure Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/configure Wed Jul 05 18:22:52 2017 +0200
@@ -2,7 +2,12 @@
CONFIGURE_COMMAND_LINE="$@"
conf_script_dir=`dirname $0`
-conf_closed_script_dir="$conf_script_dir/../../jdk/make/closed/autoconf"
+
+if [ "$CUSTOM_CONFIG_DIR" = "" ]; then
+ conf_custom_script_dir="$conf_script_dir/../../jdk/make/closed/autoconf"
+else
+ conf_custom_script_dir=$CUSTOM_CONFIG_DIR
+fi
###
### Test that the generated configure is up-to-date
@@ -14,8 +19,12 @@
print_error_not_up_to_date() {
echo "Error: The configure source files is newer than the generated files."
echo "Please run 'sh autogen.sh' to update the generated files."
+ echo "Note that this test might trigger incorrectly sometimes due to hg timestamps".
}
+# NOTE: This test can occasionally go wrong due to the way mercurial handles
+# timestamps. It it supposed to aid during development of build-infra, but should
+# go away before making this the default build system.
for file in configure.ac *.m4 ; do
if $TEST $file -nt generated-configure.sh; then
print_error_not_up_to_date
@@ -23,26 +32,32 @@
fi
done
-if $TEST -e $conf_closed_script_dir/generated-configure.sh; then
- # If closed source configure is available, make sure it is up-to-date as well.
- for file in configure.ac *.m4 $conf_closed_script_dir/*.m4; do
- if $TEST $file -nt $conf_closed_script_dir/generated-configure.sh; then
+if $TEST -e $conf_custom_script_dir/generated-configure.sh; then
+ # If custom source configure is available, make sure it is up-to-date as well.
+ for file in configure.ac *.m4 $conf_custom_script_dir/*.m4; do
+ if $TEST $file -nt $conf_custom_script_dir/generated-configure.sh; then
print_error_not_up_to_date
exit 1
fi
done
- # Test if open configure is newer than closed configure, if so, closed needs to
- # be regenerated.
+ # Test if open configure is newer than custom configure, if so, custom needs to
+ # be regenerated. This test is required to ensure consistency with custom source.
conf_open_configure_timestamp=`grep DATE_WHEN_GENERATED: $conf_script_dir/generated-configure.sh | cut -d" " -f 3`
- conf_closed_configure_timestamp=`grep DATE_WHEN_GENERATED: $conf_closed_script_dir/generated-configure.sh | cut -d" " -f 3`
- if $TEST $conf_open_configure_timestamp -gt $conf_closed_configure_timestamp; then
- print_error_not_up_to_date
+ conf_custom_configure_timestamp=`grep DATE_WHEN_GENERATED: $conf_custom_script_dir/generated-configure.sh | cut -d" " -f 3`
+ if $TEST $conf_open_configure_timestamp -gt $conf_custom_configure_timestamp; then
+ echo "Error: The generated configure file contains changes not present in the custom generated file."
+ echo "Please run 'sh autogen.sh' to update the generated files."
exit 1
fi
fi
+# Autoconf calls the configure script recursively sometimes.
+# Don't start logging twice in that case
+if $TEST "x$conf_debug_configure" = xtrue; then
+ conf_debug_configure=recursive
+fi
###
### Process command-line arguments
###
@@ -63,6 +78,12 @@
--with-extra-cxxflags=*)
conf_extra_cxxflags=`expr "X$conf_option" : '[^=]*=\(.*\)'`
continue ;;
+ --debug-configure)
+ if $TEST "x$conf_debug_configure" != xrecursive; then
+ conf_debug_configure=true
+ export conf_debug_configure
+ fi
+ continue ;;
*)
conf_processed_arguments="$conf_processed_arguments $conf_option" ;;
esac
@@ -104,13 +125,29 @@
###
### Call the configure script
###
-if $TEST -e $conf_closed_script_dir/generated-configure.sh; then
- # Closed source configure available; run that instead
- . $conf_closed_script_dir/generated-configure.sh $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags"
+if $TEST -e $conf_custom_script_dir/generated-configure.sh; then
+ # Custom source configure available; run that instead
+ echo Running custom generated-configure.sh
+ conf_script_to_run=$conf_custom_script_dir/generated-configure.sh
else
- . $conf_script_dir/generated-configure.sh $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags"
+ echo Running generated-configure.sh
+ conf_script_to_run=$conf_script_dir/generated-configure.sh
+fi
+
+if $TEST "x$conf_debug_configure" != x; then
+ # Turn on shell debug output if requested (initial or recursive)
+ set -x
fi
+if $TEST "x$conf_debug_configure" = xtrue; then
+ # Turn on logging, but don't turn on twice when called recursive
+ conf_debug_logfile=./debug-configure.log
+ (exec 3>&1 ; (. $conf_script_to_run $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags" 2>&1 1>&3 ) | tee -a $conf_debug_logfile 1>&2 ; exec 3>&-) | tee -a $conf_debug_logfile
+else
+ . $conf_script_to_run $conf_processed_arguments --with-extra-cflags="$conf_extra_cflags" --with-extra-cxxflags="$conf_extra_cxxflags"
+fi
+
+conf_result_code=$?
###
### Post-processing
###
@@ -119,3 +156,5 @@
if $TEST -d "$OUTPUT_ROOT"; then
mv -f config.log "$OUTPUT_ROOT" 2> /dev/null
fi
+
+exit $conf_result_code
--- a/common/autoconf/configure.ac Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/configure.ac Wed Jul 05 18:22:52 2017 +0200
@@ -53,9 +53,9 @@
m4_include([toolchain.m4])
# This line needs to be here, verbatim, after all includes.
-# It is replaced with closed functionality when building
-# closed sources.
-AC_DEFUN_ONCE([CLOSED_HOOK])
+# It is replaced with custom functionality when building
+# custom sources.
+AC_DEFUN_ONCE([CUSTOM_HOOK])
###############################################################################
#
@@ -65,6 +65,12 @@
# Basic initialization that must happen first of all
BASIC_INIT
+
+# Now we can determine OpenJDK build and target platforms. This is required to
+# have early on.
+PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET
+
+# Continue setting up basic stuff.
BASIC_SETUP_PATHS
BASIC_SETUP_LOGGING
@@ -75,28 +81,18 @@
# Without these, we can't properly run the rest of the configure script.
BASIC_SETUP_TOOLS
+# Check if pkg-config is available.
+PKG_PROG_PKG_CONFIG
+
+# After basic tools have been setup, we can check build os specific details.
+PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION
+
# Setup builddeps, for automatic downloading of tools we need.
# This is needed before we can call BDEPS_CHECK_MODULE, which is done in
# boot-jdk setup, but we need to have basic tools setup first.
BDEPS_CONFIGURE_BUILDDEPS
BDEPS_SCAN_FOR_BUILDDEPS
-# Check if pkg-config is available.
-PKG_PROG_PKG_CONFIG
-
-###############################################################################
-#
-# Determine OpenJDK build and target platforms.
-#
-###############################################################################
-
-PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET
-PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION
-
-# With knowledge of the build platform, setup more basic things.
-BASIC_SETUP_PATH_SEP
-BASIC_SETUP_SEARCHPATH
-
###############################################################################
#
# Determine OpenJDK variants, options and version numbers.
@@ -148,7 +144,7 @@
# FIXME: Currently we must test this after paths but before flags. Fix!
# And we can test some aspects on the target using configure macros.
-PLATFORM_TEST_OPENJDK_TARGET_BITS
+PLATFORM_SETUP_OPENJDK_TARGET_BITS
PLATFORM_SETUP_OPENJDK_TARGET_ENDIANNESS
# Configure flags for the tools
@@ -213,8 +209,8 @@
# Check for some common pitfalls
BASIC_TEST_USABILITY_ISSUES
-# At the end, call the closed hook. (Dummy macro if no closed sources available)
-CLOSED_HOOK
+# At the end, call the custom hook. (Dummy macro if no custom sources available)
+CUSTOM_HOOK
# We're messing a bit with internal autoconf variables to put the config.status
# in the output directory instead of the current directory.
@@ -222,5 +218,8 @@
# Create the actual output files. Now the main work of configure is done.
AC_OUTPUT
+# Make the compare script executable
+$CHMOD +x $OUTPUT_ROOT/compare.sh
+
# Finally output some useful information to the user
HELP_PRINT_SUMMARY_AND_WARNINGS
--- a/common/autoconf/generated-configure.sh Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/generated-configure.sh Wed Jul 05 18:22:52 2017 +0200
@@ -597,13 +597,10 @@
LIBOBJS
CCACHE
USE_PRECOMPILED_HEADER
+SJAVAC_SERVER_DIR
ENABLE_SJAVAC
-JAVAC_USE_MODE
-JAVAC_USE_DEPS
-JAVAC_SERVER_CORES
-JAVAC_SERVERS
-JAVAC_USE_REMOTE
-SERVER_JAVA
+SJAVAC_SERVER_CORES
+SJAVAC_SERVER_JAVA
MEMORY_SIZE
CONCURRENT_BUILD_JOBS
NUM_CORES
@@ -635,6 +632,7 @@
ZIP_DEBUGINFO_FILES
ENABLE_DEBUG_SYMBOLS
UNCYGDRIVE
+LDFLAGS_CXX_JDK
LDFLAGS_JDKEXE_SUFFIX
LDFLAGS_JDKLIB_SUFFIX
LDFLAGS_JDKEXE
@@ -644,6 +642,9 @@
CFLAGS_JDKEXE
CFLAGS_JDKLIB
PACKAGE_PATH
+LEGACY_EXTRA_LDFLAGS
+LEGACY_EXTRA_CXXFLAGS
+LEGACY_EXTRA_CFLAGS
CXX_FLAG_DEPS
C_FLAG_DEPS
CXX_O_FLAG_NONE
@@ -656,6 +657,7 @@
C_O_FLAG_HIGHEST
POST_MCS_CMD
POST_STRIP_CMD
+SET_EXECUTABLE_ORIGIN
SET_SHARED_LIBRARY_ORIGIN
CXX_FLAG_REORDER
C_FLAG_REORDER
@@ -669,14 +671,11 @@
STATIC_LIBRARY
SHARED_LIBRARY
OBJ_SUFFIX
-ENDIAN
-ARCH_DATA_MODEL
-LP64
+LIPO
OBJCOPY
MCS
STRIP
NM
-ASFLAGS
AS
CXXCPP
CPP
@@ -706,30 +705,18 @@
LDFLAGS
CFLAGS
CC
-HOSTLD
-HOSTCXX
-HOSTCC
-DEFINE_CROSS_COMPILE_ARCH
+BUILD_LD
+BUILD_CXX
+BUILD_CC
MSVCR100DLL
CHECK_FOR_VCINSTALLDIR
SETUPDEVENV
+CYGWIN_LINK
AR_OUT_OPTION
LD_OUT_OPTION
EXE_OUT_OPTION
CC_OUT_OPTION
-SYS_ROOT
-HOTSPOT_DIST
-JAXWS_DIST
-JAXP_DIST
-CORBA_DIST
-LANGTOOLS_DIST
-IMAGES_OUTPUTDIR
-JDK_OUTPUTDIR
-HOTSPOT_OUTPUTDIR
-JAXWS_OUTPUTDIR
-JAXP_OUTPUTDIR
-CORBA_OUTPUTDIR
-LANGTOOLS_OUTPUTDIR
+BUILD_OUTPUT
OVERRIDE_SRC_ROOT
ADD_SRC_ROOT
JDK_TOPDIR
@@ -739,17 +726,11 @@
CORBA_TOPDIR
LANGTOOLS_TOPDIR
BOOT_JDK_JVMARGS
-NATIVE2ASCII
-RMIC
-JAR
-JAVAH
JAVAC_FLAGS
-JAVAC
BOOT_JDK_SOURCETARGET
-JAVA
+BOOT_JDK
BOOT_TOOLSJAR
BOOT_RTJAR
-BOOT_JDK
JAVA_CHECK
JAVAC_CHECK
OUTPUT_ROOT
@@ -777,9 +758,6 @@
CACERTS_FILE
TEST_IN_BUILD
DISABLE_NIMBUS
-GENERATE_DOCS
-ENABLE_DOCS
-BUILD_HEADLESS_ONLY
BUILD_HEADLESS
SUPPORT_HEADFUL
SUPPORT_HEADLESS
@@ -790,6 +768,7 @@
FASTDEBUG
VARIANT
DEBUG_LEVEL
+MACOSX_UNIVERSAL
JVM_VARIANT_ZEROSHARK
JVM_VARIANT_ZERO
JVM_VARIANT_KERNEL
@@ -797,39 +776,98 @@
JVM_VARIANT_SERVER
JVM_VARIANTS
JDK_VARIANT
-MINIMIZE_RAM_USAGE
-JAVASE_EMBEDDED
-PATH_SEP
-CYGPATH
+BDEPS_FTP
+BDEPS_UNZIP
OS_VERSION_MICRO
OS_VERSION_MINOR
OS_VERSION_MAJOR
+PKG_CONFIG
+HG
+OBJDUMP
+READELF
+OTOOL
+LDD
+THEPWDCMD
+FIND_DELETE
+RM
+MAKE
+CHECK_TOOLSDIR_MAKE
+CHECK_TOOLSDIR_GMAKE
+CHECK_MAKE
+CHECK_GMAKE
+NAWK
+SED
+FGREP
+EGREP
+GREP
+AWK
+ZIP
+XARGS
+WC
+UNZIP
+UNIQ
+TR
+TOUCH
+TEE
+TAR
+TAIL
+SORT
+SH
+PRINTF
+MV
+MKDIR
+LS
+LN
+HEAD
+FIND
+FILE
+EXPR
+ECHO
+DIFF
+DF
+DATE
+CUT
+CPIO
+CP
+CMP
+CHMOD
+CAT
+BASENAME
+PKGHANDLER
+BUILD_LOG_WRAPPER
+BUILD_LOG_PREVIOUS
+BUILD_LOG
+SYS_ROOT
+PATH_SEP
+CYGPATH
+SRC_ROOT
+READLINK
+DEFINE_CROSS_COMPILE_ARCH
+LP64
+OPENJDK_TARGET_OS_API_DIR
+OPENJDK_TARGET_CPU_JLI_CFLAGS
+OPENJDK_TARGET_CPU_OSARCH
+OPENJDK_TARGET_CPU_ISADIR
+OPENJDK_TARGET_CPU_LIBDIR
+OPENJDK_TARGET_CPU_LEGACY_LIB
+OPENJDK_TARGET_CPU_LEGACY
REQUIRED_OS_VERSION
REQUIRED_OS_NAME
-LEGACY_OPENJDK_BUILD_CPU3
-LEGACY_OPENJDK_BUILD_CPU2
-LEGACY_OPENJDK_BUILD_CPU1
+COMPILE_TYPE
OPENJDK_BUILD_CPU_ENDIAN
OPENJDK_BUILD_CPU_BITS
OPENJDK_BUILD_CPU_ARCH
OPENJDK_BUILD_CPU
-LEGACY_OPENJDK_BUILD_OS_API
OPENJDK_BUILD_OS_API
-OPENJDK_BUILD_OS_FAMILY
OPENJDK_BUILD_OS
-LEGACY_OPENJDK_TARGET_CPU3
-LEGACY_OPENJDK_TARGET_CPU2
-LEGACY_OPENJDK_TARGET_CPU1
OPENJDK_TARGET_CPU_ENDIAN
OPENJDK_TARGET_CPU_BITS
OPENJDK_TARGET_CPU_ARCH
OPENJDK_TARGET_CPU
-LEGACY_OPENJDK_TARGET_OS_API
OPENJDK_TARGET_OS_API
-OPENJDK_TARGET_OS_FAMILY
OPENJDK_TARGET_OS
-OPENJDK_BUILD_SYSTEM
-OPENJDK_TARGET_SYSTEM
+OPENJDK_BUILD_AUTOCONF_NAME
+OPENJDK_TARGET_AUTOCONF_NAME
target_os
target_vendor
target_cpu
@@ -842,60 +880,9 @@
build_vendor
build_cpu
build
-PKG_CONFIG
-BDEPS_FTP
-BDEPS_UNZIP
-HG
-FILE
-EXPR
-READELF
-OTOOL
-LDD
-UNZIP
-ZIP
-XARGS
-WC
-TOUCH
-TR
-TEE
-TAIL
-TAR
-SORT
-SH
-SED
-RM
-THEPWDCMD
-PRINTF
-NAWK
-MV
-MKDIR
-MAKE
-LS
-LN
-HEAD
-FIND_DELETE
-FIND
-FGREP
-EGREP
-GREP
-ECHO
-DIFF
-DF
-DATE
-CUT
-CPIO
-CP
-CHMOD
-CAT
-AWK
-PKGHANDLER
-BUILD_LOG_WRAPPER
-BUILD_LOG_PREVIOUS
-BUILD_LOG
-SRC_ROOT
-READLINK
DATE_WHEN_CONFIGURED
CONFIGURE_COMMAND_LINE
+CUSTOM_MAKE_DIR
target_alias
host_alias
build_alias
@@ -937,12 +924,16 @@
ac_subst_files=''
ac_user_opts='
enable_option_checking
+with_custom_make_dir
+with_target_bits
+with_sys_root
+with_tools_dir
+with_devkit
with_builddeps_conf
with_builddeps_server
with_builddeps_dir
with_builddeps_group
enable_list_builddeps
-with_target_bits
with_jdk_variant
with_jvm_variants
enable_debug
@@ -950,7 +941,6 @@
enable_openjdk_only
enable_jigsaw
enable_headful
-enable_docs
enable_nimbus
enable_hotspot_test_in_build
with_cacerts_file
@@ -968,9 +958,6 @@
with_override_hotspot
with_override_jdk
with_msvcr100dll
-with_sys_root
-with_tools_dir
-with_devkit
with_extra_cflags
with_extra_cxxflags
with_extra_ldflags
@@ -989,11 +976,8 @@
enable_static_link_stdc__
with_num_cores
with_memory_size
-with_server_java
-enable_javac_server
-with_javac_server_cores
-enable_javac_deps
-enable_javac_multi_core
+with_sjavac_server_java
+with_sjavac_server_cores
enable_sjavac
enable_precompiled_headers
enable_ccache
@@ -1649,8 +1633,6 @@
--enable-jigsaw build Jigsaw images (not yet available) [disabled]
--disable-headful build headful support (graphical UI support)
[enabled]
- --enable-docs enable generation of Javadoc documentation
- [disabled]
--disable-nimbus disable Nimbus L&F [enabled]
--enable-hotspot-test-in-build
enable running of Queens test after Hotspot build
@@ -1666,12 +1648,6 @@
--disable-static-link-stdc++
disable static linking of the C++ runtime on Linux
[enabled]
- --enable-javac-server enable the shared javac server during the build
- process [disabled]
- --enable-javac-deps enable the dependency tracking between Java packages
- [disabled]
- --enable-javac-multi-core
- compile Java packages concurrently [disabled]
--enable-sjavac use sjavac to do fast incremental compiles
[disabled]
--disable-precompiled-headers
@@ -1681,6 +1657,16 @@
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-custom-make-dir directory containing custom build/make files
+ --with-target-bits build 32-bit or 64-bit binaries (for platforms that
+ support it), e.g. --with-target-bits=32 [guessed]
+ --with-sys-root pass this sys-root to the compilers and linker
+ (useful if the sys-root encoded in the cross
+ compiler tools is incorrect)
+ --with-tools-dir search this directory for (cross-compiling)
+ compilers and tools
+ --with-devkit use this directory as base for tools-dir and
+ sys-root (for cross-compiling)
--with-builddeps-conf use this configuration file for the builddeps
--with-builddeps-server download and use build dependencies from this server
url, e.g.
@@ -1689,9 +1675,7 @@
[d/localhome/builddeps]
--with-builddeps-group chgrp the downloaded build dependencies to this
group
- --with-target-bits build 32-bit or 64-bit binaries (for platforms that
- support it), e.g. --with-target-bits=32 [guessed]
- --with-jdk-variant JDK variant to build (normal, embedded) [normal]
+ --with-jdk-variant JDK variant to build (normal) [normal]
--with-jvm-variants JVM variants (separated by commas) to build (server,
client, kernel, zero, zeroshark) [server]
--with-debug-level set the debug level (release, fastdebug, slowdebug)
@@ -1724,12 +1708,6 @@
--with-override-hotspot use this hotspot dir for the build
--with-override-jdk use this jdk dir for the build
--with-msvcr100dll copy this msvcr100.dll into the built JDK
- --with-sys-root pass this sys-root to the compilers and linker
- (useful if the sys-root encoded in the cross
- compiler tools is incorrect)
- --with-tools-dir search this directory for compilers and tools
- --with-devkit use this directory as base for tools-dir and
- sys-root
--with-extra-cflags extra flags to be used when compiling jdk c-files
--with-extra-cxxflags extra flags to be used when compiling jdk c++-files
--with-extra-ldflags extra flags to be used when linking jdk
@@ -1753,13 +1731,15 @@
--with-num-cores=8 [probed]
--with-memory-size memory (in MB) available in the build system, e.g.
--with-memory-size=1024 [probed]
- --with-server-java use this java binary for running the javac
+ --with-sjavac-server-java
+ use this java binary for running the sjavac
background server and other long running java tasks
in the build process, e.g.
- ---with-server-java="/opt/jrockit/bin/java -server"
- --with-javac-server-cores
+ ---with-sjavac-server-java="/opt/jrockit/bin/java
+ -server"
+ --with-sjavac-server-cores
use at most this number of concurrent threads on the
- javac server [probed]
+ sjavac server [probed]
--with-ccache-dir where to store ccache files [~/.ccache]
Some influential environment variables:
@@ -2053,6 +2033,97 @@
} # ac_fn_cxx_try_cpp
+# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_cxx_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval "test \"\${$3+set}\"" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ----------------------------------------- ##
+## Report this to build-dev@openjdk.java.net ##
+## ----------------------------------------- ##"
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_cxx_check_header_mongrel
+
# ac_fn_cxx_try_run LINENO
# ------------------------
# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
@@ -2095,6 +2166,37 @@
} # ac_fn_cxx_try_run
+# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
+# ---------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_cxx_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_cxx_check_header_compile
+
# ac_fn_cxx_compute_int LINENO EXPR VAR INCLUDES
# ----------------------------------------------
# Tries to find the compile-time value of EXPR in a program that includes
@@ -2273,37 +2375,6 @@
} # ac_fn_cxx_compute_int
-# ac_fn_cxx_check_header_compile LINENO HEADER VAR INCLUDES
-# ---------------------------------------------------------
-# Tests whether HEADER exists and can be compiled using the include files in
-# INCLUDES, setting the cache variable VAR accordingly.
-ac_fn_cxx_check_header_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_cxx_check_header_compile
-
# ac_fn_cxx_try_link LINENO
# -------------------------
# Try to link conftest.$ac_ext, and return whether this succeeded.
@@ -2507,97 +2578,6 @@
eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
} # ac_fn_c_check_header_mongrel
-
-# ac_fn_cxx_check_header_mongrel LINENO HEADER VAR INCLUDES
-# ---------------------------------------------------------
-# Tests whether HEADER exists, giving a warning if it cannot be compiled using
-# the include files in INCLUDES and setting the cache variable VAR
-# accordingly.
-ac_fn_cxx_check_header_mongrel ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if eval "test \"\${$3+set}\"" = set; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
- $as_echo_n "(cached) " >&6
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
- # Is the header compilable?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
-$as_echo_n "checking $2 usability... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_compile "$LINENO"; then :
- ac_header_compiler=yes
-else
- ac_header_compiler=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
-$as_echo_n "checking $2 presence... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include <$2>
-_ACEOF
-if ac_fn_cxx_try_cpp "$LINENO"; then :
- ac_header_preproc=yes
-else
- ac_header_preproc=no
-fi
-rm -f conftest.err conftest.i conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So? What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in #((
- yes:no: )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
- ;;
- no:yes:* )
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
-( $as_echo "## ----------------------------------------- ##
-## Report this to build-dev@openjdk.java.net ##
-## ----------------------------------------- ##"
- ) | sed "s/^/$as_me: WARNING: /" >&2
- ;;
-esac
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if eval "test \"\${$3+set}\"" = set; then :
- $as_echo_n "(cached) " >&6
-else
- eval "$3=\$ac_header_compiler"
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_cxx_check_header_mongrel
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
@@ -2952,7 +2932,7 @@
# Do not change or remove the following line, it is needed for consistency checks:
-# DATE_WHEN_GENERATED: 1341161875
+# DATE_WHEN_GENERATED: 1347963060
ac_aux_dir=
for ac_dir in build-aux "$srcdir"/build-aux; do
@@ -3083,10 +3063,7 @@
-
-
-
-
+# Setup basic configuration paths, and platform-specific stuff related to PATHs.
@@ -3096,10 +3073,25 @@
#%%% Simple tools %%%
-
-
-
-
+# Check if we have found a usable version of make
+# $1: the path to a potential make binary (or empty)
+# $2: the description on how we found this
+
+
+# Goes looking for a usable version of GNU make.
+
+
+
+
+# Test that variable $1 denoting a program is not empty. If empty, exit with an error.
+# $1: variable to check
+# $2: executable name to print in warning (optional)
+
+
+# Does AC_PATH_PROG followed by CHECK_NONEMPTY.
+# Arguments as AC_PATH_PROG:
+# $1: variable to set
+# $2: executable name to look for
@@ -3176,9 +3168,43 @@
# questions.
#
-# Fixes paths on windows to be mixed mode short.
-
-
+# Execute the check given as argument, and verify the result
+# If the Boot JDK was previously found, do nothing
+# $1 A command line (typically autoconf macro) to execute
+
+
+# Test: Is bootjdk explicitely set by command line arguments?
+
+
+# Test: Is bootjdk available from builddeps?
+
+
+# Test: Is $JAVA_HOME set?
+
+
+# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+
+
+# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+
+
+# Look for a jdk in the given path. If there are multiple, try to select the newest.
+# If found, set BOOT_JDK and BOOT_JDK_FOUND.
+# $1 = Path to directory containing jdk installations.
+# $2 = String to append to the found JDK directory to get the proper JDK home
+
+
+# Call BOOTJDK_FIND_BEST_JDK_IN_DIRECTORY, but use the given
+# environmental variable as base for where to look.
+# $1 Name of an environmal variable, assumed to point to the Program Files directory.
+
+
+# Test: Is there a JDK installed in default, well-known locations?
+
+
+# Check that a command-line tool in the Boot JDK is correct
+# $1 = name of variable to assign
+# $2 = name of binary
###############################################################################
@@ -3360,6 +3386,18 @@
+# Support for customization of the build process. Some build files
+# will include counterparts from this location, if they exist. This allows
+# for a degree of customization of the build targets and the rules/recipes
+# to create them
+
+# Check whether --with-custom-make-dir was given.
+if test "${with_custom_make_dir+set}" = set; then :
+ withval=$with_custom_make_dir; CUSTOM_MAKE_DIR=$with_custom_make_dir
+fi
+
+
+
#
# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
@@ -3424,14 +3462,31 @@
# questions.
#
-
-
-
-
-
-
-
-
+# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
+# Converts autoconf style CPU name to OpenJDK style, into
+# VAR_CPU, VAR_CPU_ARCH, VAR_CPU_BITS and VAR_CPU_ENDIAN.
+
+
+# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
+# Converts autoconf style OS name to OpenJDK style, into
+# VAR_OS and VAR_OS_API.
+
+
+# Expects $host_os $host_cpu $build_os and $build_cpu
+# and $with_target_bits to have been setup!
+#
+# Translate the standard triplet(quadruplet) definition
+# of the target/build system into OPENJDK_TARGET_OS, OPENJDK_TARGET_CPU,
+# OPENJDK_BUILD_OS, etc.
+
+
+# Check if a reduced build (32-bit on 64-bit platforms) is requested, and modify behaviour
+# accordingly. Must be done after setting up build and target system, but before
+# doing anything else with these values.
+
+
+ # Setup the legacy variables, for controlling the old makefiles.
+ #
@@ -3441,6 +3496,8 @@
+# Support macro for PLATFORM_SETUP_OPENJDK_TARGET_BITS.
+# Add -mX to various FLAGS variables.
@@ -3519,8 +3576,8 @@
# This line needs to be here, verbatim, after all includes.
-# It is replaced with closed functionality when building
-# closed sources.
+# It is replaced with custom functionality when building
+# custom sources.
###############################################################################
@@ -3536,6 +3593,501 @@
DATE_WHEN_CONFIGURED=`LANG=C date`
+
+# Now we can determine OpenJDK build and target platforms. This is required to
+# have early on.
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if test "${ac_cv_target+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+# Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
+# is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
+# product you're building. The target of this build is called "host". Since this is confusing to most people, we
+# have not adopted that system, but use "target" as the platform we are building for. In some places though we need
+# to use the configure naming style.
+
+
+
+
+
+ # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
+ # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
+ # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
+ # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
+ OPENJDK_TARGET_AUTOCONF_NAME="$host"
+ OPENJDK_BUILD_AUTOCONF_NAME="$build"
+
+
+
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+
+ case "$host_os" in
+ *linux*)
+ VAR_OS=linux
+ VAR_OS_API=posix
+ ;;
+ *solaris*)
+ VAR_OS=solaris
+ VAR_OS_API=posix
+ ;;
+ *darwin*)
+ VAR_OS=macosx
+ VAR_OS_API=posix
+ ;;
+ *bsd*)
+ VAR_OS=bsd
+ VAR_OS_API=posix
+ ;;
+ *cygwin*|*windows*)
+ VAR_OS=windows
+ VAR_OS_API=winapi
+ ;;
+ *)
+ as_fn_error $? "unsupported operating system $host_os" "$LINENO" 5
+ ;;
+ esac
+
+
+ # First argument is the cpu name from the trip/quad
+ case "$host_cpu" in
+ x86_64)
+ VAR_CPU=x86_64
+ VAR_CPU_ARCH=x86
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=little
+ ;;
+ i?86)
+ VAR_CPU=x86
+ VAR_CPU_ARCH=x86
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=little
+ ;;
+ arm*)
+ VAR_CPU=arm
+ VAR_CPU_ARCH=arm
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=little
+ ;;
+ powerpc)
+ VAR_CPU=ppc
+ VAR_CPU_ARCH=ppc
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=big
+ ;;
+ powerpc64)
+ VAR_CPU=ppc64
+ VAR_CPU_ARCH=ppc
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=big
+ ;;
+ sparc)
+ VAR_CPU=sparc
+ VAR_CPU_ARCH=sparc
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=big
+ ;;
+ sparcv9)
+ VAR_CPU=sparcv9
+ VAR_CPU_ARCH=sparc
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=big
+ ;;
+ *)
+ as_fn_error $? "unsupported cpu $host_cpu" "$LINENO" 5
+ ;;
+ esac
+
+ # ... and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_TARGET_OS="$VAR_OS"
+ OPENJDK_TARGET_OS_API="$VAR_OS_API"
+ OPENJDK_TARGET_CPU="$VAR_CPU"
+ OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+
+
+
+
+
+
+
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+
+ case "$build_os" in
+ *linux*)
+ VAR_OS=linux
+ VAR_OS_API=posix
+ ;;
+ *solaris*)
+ VAR_OS=solaris
+ VAR_OS_API=posix
+ ;;
+ *darwin*)
+ VAR_OS=macosx
+ VAR_OS_API=posix
+ ;;
+ *bsd*)
+ VAR_OS=bsd
+ VAR_OS_API=posix
+ ;;
+ *cygwin*|*windows*)
+ VAR_OS=windows
+ VAR_OS_API=winapi
+ ;;
+ *)
+ as_fn_error $? "unsupported operating system $build_os" "$LINENO" 5
+ ;;
+ esac
+
+
+ # First argument is the cpu name from the trip/quad
+ case "$build_cpu" in
+ x86_64)
+ VAR_CPU=x86_64
+ VAR_CPU_ARCH=x86
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=little
+ ;;
+ i?86)
+ VAR_CPU=x86
+ VAR_CPU_ARCH=x86
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=little
+ ;;
+ arm*)
+ VAR_CPU=arm
+ VAR_CPU_ARCH=arm
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=little
+ ;;
+ powerpc)
+ VAR_CPU=ppc
+ VAR_CPU_ARCH=ppc
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=big
+ ;;
+ powerpc64)
+ VAR_CPU=ppc64
+ VAR_CPU_ARCH=ppc
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=big
+ ;;
+ sparc)
+ VAR_CPU=sparc
+ VAR_CPU_ARCH=sparc
+ VAR_CPU_BITS=32
+ VAR_CPU_ENDIAN=big
+ ;;
+ sparcv9)
+ VAR_CPU=sparcv9
+ VAR_CPU_ARCH=sparc
+ VAR_CPU_BITS=64
+ VAR_CPU_ENDIAN=big
+ ;;
+ *)
+ as_fn_error $? "unsupported cpu $build_cpu" "$LINENO" 5
+ ;;
+ esac
+
+ # ..and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_BUILD_OS="$VAR_OS"
+ OPENJDK_BUILD_OS_API="$VAR_OS_API"
+ OPENJDK_BUILD_CPU="$VAR_CPU"
+ OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+
+
+
+
+
+
+
+
+
+# Check whether --with-target-bits was given.
+if test "${with_target_bits+set}" = set; then :
+ withval=$with_target_bits;
+fi
+
+
+ # We have three types of compiles:
+ # native == normal compilation, target system == build system
+ # cross == traditional cross compilation, target system != build system; special toolchain needed
+ # reduced == using native compilers, but with special flags (e.g. -m32) to produce 32-bit builds on 64-bit machines
+ #
+ if test "x$OPENJDK_BUILD_AUTOCONF_NAME" != "x$OPENJDK_TARGET_AUTOCONF_NAME"; then
+ # We're doing a proper cross-compilation
+ COMPILE_TYPE="cross"
+ else
+ COMPILE_TYPE="native"
+ fi
+
+ if test "x$with_target_bits" != x; then
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ as_fn_error $? "It is not possible to combine --with-target-bits=X and proper cross-compilation. Choose either." "$LINENO" 5
+ fi
+
+ if test "x$with_target_bits" = x32 && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ # A reduced build is requested
+ COMPILE_TYPE="reduced"
+ OPENJDK_TARGET_CPU_BITS=32
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = "xx86"; then
+ OPENJDK_TARGET_CPU=x86
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
+ OPENJDK_TARGET_CPU=sparc
+ else
+ as_fn_error $? "Reduced build (--with-target-bits=32) is only supported on x86_64 and sparcv9" "$LINENO" 5
+ fi
+ elif test "x$with_target_bits" = x64 && test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ as_fn_error $? "It is not possible to use --with-target-bits=64 on a 32 bit system. Use proper cross-compilation instead." "$LINENO" 5
+ elif test "x$with_target_bits" = "x$OPENJDK_TARGET_CPU_BITS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: --with-target-bits are set to build platform address size; argument has no meaning" >&5
+$as_echo "$as_me: --with-target-bits are set to build platform address size; argument has no meaning" >&6;}
+ else
+ as_fn_error $? "--with-target-bits can only be 32 or 64, you specified $with_target_bits!" "$LINENO" 5
+ fi
+ fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for compilation type" >&5
+$as_echo_n "checking for compilation type... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMPILE_TYPE" >&5
+$as_echo "$COMPILE_TYPE" >&6; }
+
+
+ if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ REQUIRED_OS_NAME=SunOS
+ REQUIRED_OS_VERSION=5.10
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
+ REQUIRED_OS_NAME=Linux
+ REQUIRED_OS_VERSION=2.6
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ REQUIRED_OS_NAME=Windows
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
+ REQUIRED_OS_VERSION=5.2
+ else
+ REQUIRED_OS_VERSION=5.1
+ fi
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ REQUIRED_OS_NAME=Darwin
+ REQUIRED_OS_VERSION=11.2
+ fi
+
+
+
+
+
+ # Also store the legacy naming of the cpu.
+ # Ie i586 and amd64 instead of x86 and x86_64
+ OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY="i586"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except MacOSX replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_LEGACY="amd64"
+ fi
+
+
+ # And the second legacy naming of the cpu.
+ # Ie i386 and amd64 instead of x86 and x86_64.
+ OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
+ elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
+ fi
+
+
+ # This is the name of the cpu (but using i386 and amd64 instead of
+ # x86 and x86_64, respectively), preceeded by a /, to be used when
+ # locating libraries. On macosx, it's empty, though.
+ OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ OPENJDK_TARGET_CPU_LIBDIR=""
+ fi
+
+
+ # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
+ # /amd64 or /sparcv9. This string is appended to some library paths, like this:
+ # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
+ OPENJDK_TARGET_CPU_ISADIR=""
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_ISADIR="/amd64"
+ elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
+ OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
+ fi
+ fi
+
+
+ # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
+ OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
+ # On linux only, we replace x86 with i386.
+ OPENJDK_TARGET_CPU_OSARCH="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_OSARCH="amd64"
+ fi
+
+
+ OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_JLI="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_JLI="amd64"
+ fi
+ # Now setup the -D flags for building libjli.
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
+ fi
+ fi
+
+
+ # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
+ if test "x$OPENJDK_TARGET_OS_API" = xposix; then
+ OPENJDK_TARGET_OS_API_DIR="solaris"
+ fi
+ if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
+ OPENJDK_TARGET_OS_API_DIR="windows"
+ fi
+
+
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ A_LP64="LP64:="
+ ADD_LP64="-D_LP64=1"
+ fi
+ LP64=$A_LP64
+
+
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ # FIXME: ... or should this include reduced builds..?
+ DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
+ else
+ DEFINE_CROSS_COMPILE_ARCH=""
+ fi
+
+
+
+
+# Continue setting up basic stuff.
+
# Locate the directory of this script.
SCRIPT="$0"
@@ -3622,7 +4174,6 @@
AUTOCONF_DIR=`dirname $0`
-
# Where is the source? It is located two levels above the configure script.
CURDIR="$PWD"
cd "$AUTOCONF_DIR/../.."
@@ -3642,7 +4193,11 @@
HAS_SPACE=`echo "$SRC_ROOT" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
SRC_ROOT=`$CYGPATH -s -m -a "$SRC_ROOT"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ SRC_ROOT=`$ECHO "$SRC_ROOT" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
SRC_ROOT=`$CYGPATH -u "$SRC_ROOT"`
else
as_fn_error $? "You cannot have spaces in the path to the source root! \"$SRC_ROOT\"" "$LINENO" 5
@@ -3655,7 +4210,11 @@
HAS_SPACE=`echo "$CURDIR" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
CURDIR=`$CYGPATH -s -m -a "$CURDIR"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ CURDIR=`$ECHO "$CURDIR" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
CURDIR=`$CYGPATH -u "$CURDIR"`
else
as_fn_error $? "You cannot have spaces in the path to the current directory! \"$CURDIR\"" "$LINENO" 5
@@ -3663,6 +4222,101 @@
fi
+if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
+ # Add extra search paths on solaris for utilities like ar and as etc...
+ PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"
+fi
+
+# For cygwin we need cygpath first, since it is used everywhere.
+# Extract the first word of "cygpath", so it can be a program name with args.
+set dummy cygpath; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CYGPATH+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CYGPATH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CYGPATH=$ac_cv_path_CYGPATH
+if test -n "$CYGPATH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
+$as_echo "$CYGPATH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+PATH_SEP=":"
+if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ if test "x$CYGPATH" = x; then
+ as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
+ fi
+ PATH_SEP=";"
+fi
+
+
+# You can force the sys-root if the sys-root encoded into the cross compiler tools
+# is not correct.
+
+# Check whether --with-sys-root was given.
+if test "${with_sys_root+set}" = set; then :
+ withval=$with_sys_root;
+fi
+
+
+if test "x$with_sys_root" != x; then
+ SYS_ROOT=$with_sys_root
+else
+ SYS_ROOT=/
+fi
+
+
+
+# Check whether --with-tools-dir was given.
+if test "${with_tools_dir+set}" = set; then :
+ withval=$with_tools_dir; TOOLS_DIR=$with_tools_dir
+fi
+
+
+
+# Check whether --with-devkit was given.
+if test "${with_devkit+set}" = set; then :
+ withval=$with_devkit;
+ if test "x$with_sys_root" != x; then
+ as_fn_error $? "Cannot specify both --with-devkit and --with-sys-root at the same time" "$LINENO" 5
+ fi
+ if test "x$with_tools_dir" != x; then
+ as_fn_error $? "Cannot specify both --with-devkit and --with-tools-dir at the same time" "$LINENO" 5
+ fi
+ TOOLS_DIR=$with_devkit/bin
+ SYS_ROOT=$with_devkit/$host_alias/libc
+
+fi
+
+
+
# Setup default logging of stdout and stderr to build.log in the output root.
BUILD_LOG='$(OUTPUT_ROOT)/build.log'
@@ -3721,6 +4375,1958 @@
# Setup simple tools, that do not need have cross compilation support.
# Without these, we can't properly run the rest of the configure script.
+
+# Start with tools that do not need have cross compilation support
+# and can be expected to be found in the default PATH. These tools are
+# used by configure. Nor are these tools expected to be found in the
+# devkit from the builddeps server either, since they are
+# needed to download the devkit.
+
+# First are all the simple required tools.
+
+ for ac_prog in basename
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_BASENAME+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BASENAME in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BASENAME="$BASENAME" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_BASENAME="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BASENAME=$ac_cv_path_BASENAME
+if test -n "$BASENAME"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BASENAME" >&5
+$as_echo "$BASENAME" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BASENAME" && break
+done
+
+
+ if test "x$BASENAME" = x; then
+ if test "xbasename" = x; then
+ PROG_NAME=basename
+ else
+ PROG_NAME=basename
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cat
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CAT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CAT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CAT=$ac_cv_path_CAT
+if test -n "$CAT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5
+$as_echo "$CAT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CAT" && break
+done
+
+
+ if test "x$CAT" = x; then
+ if test "xcat" = x; then
+ PROG_NAME=cat
+ else
+ PROG_NAME=cat
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in chmod
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CHMOD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CHMOD in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CHMOD=$ac_cv_path_CHMOD
+if test -n "$CHMOD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5
+$as_echo "$CHMOD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CHMOD" && break
+done
+
+
+ if test "x$CHMOD" = x; then
+ if test "xchmod" = x; then
+ PROG_NAME=chmod
+ else
+ PROG_NAME=chmod
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cmp
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CMP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CMP="$CMP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CMP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CMP=$ac_cv_path_CMP
+if test -n "$CMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CMP" >&5
+$as_echo "$CMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CMP" && break
+done
+
+
+ if test "x$CMP" = x; then
+ if test "xcmp" = x; then
+ PROG_NAME=cmp
+ else
+ PROG_NAME=cmp
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cp
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CP="$CP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CP=$ac_cv_path_CP
+if test -n "$CP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5
+$as_echo "$CP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CP" && break
+done
+
+
+ if test "x$CP" = x; then
+ if test "xcp" = x; then
+ PROG_NAME=cp
+ else
+ PROG_NAME=cp
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cpio
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CPIO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CPIO in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CPIO=$ac_cv_path_CPIO
+if test -n "$CPIO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5
+$as_echo "$CPIO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CPIO" && break
+done
+
+
+ if test "x$CPIO" = x; then
+ if test "xcpio" = x; then
+ PROG_NAME=cpio
+ else
+ PROG_NAME=cpio
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cut
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CUT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CUT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CUT="$CUT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CUT=$ac_cv_path_CUT
+if test -n "$CUT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5
+$as_echo "$CUT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CUT" && break
+done
+
+
+ if test "x$CUT" = x; then
+ if test "xcut" = x; then
+ PROG_NAME=cut
+ else
+ PROG_NAME=cut
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in date
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_DATE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DATE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DATE=$ac_cv_path_DATE
+if test -n "$DATE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5
+$as_echo "$DATE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DATE" && break
+done
+
+
+ if test "x$DATE" = x; then
+ if test "xdate" = x; then
+ PROG_NAME=date
+ else
+ PROG_NAME=date
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in df
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_DF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DF in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DF="$DF" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DF=$ac_cv_path_DF
+if test -n "$DF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5
+$as_echo "$DF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DF" && break
+done
+
+
+ if test "x$DF" = x; then
+ if test "xdf" = x; then
+ PROG_NAME=df
+ else
+ PROG_NAME=df
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in gdiff diff
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_DIFF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $DIFF in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+DIFF=$ac_cv_path_DIFF
+if test -n "$DIFF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5
+$as_echo "$DIFF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DIFF" && break
+done
+
+
+ if test "x$DIFF" = x; then
+ if test "xgdiff diff" = x; then
+ PROG_NAME=diff
+ else
+ PROG_NAME=gdiff diff
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in echo
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_ECHO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ECHO in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ECHO=$ac_cv_path_ECHO
+if test -n "$ECHO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5
+$as_echo "$ECHO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ECHO" && break
+done
+
+
+ if test "x$ECHO" = x; then
+ if test "xecho" = x; then
+ PROG_NAME=echo
+ else
+ PROG_NAME=echo
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in expr
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_EXPR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $EXPR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+EXPR=$ac_cv_path_EXPR
+if test -n "$EXPR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5
+$as_echo "$EXPR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$EXPR" && break
+done
+
+
+ if test "x$EXPR" = x; then
+ if test "xexpr" = x; then
+ PROG_NAME=expr
+ else
+ PROG_NAME=expr
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in file
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_FILE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $FILE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_FILE="$FILE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+FILE=$ac_cv_path_FILE
+if test -n "$FILE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5
+$as_echo "$FILE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FILE" && break
+done
+
+
+ if test "x$FILE" = x; then
+ if test "xfile" = x; then
+ PROG_NAME=file
+ else
+ PROG_NAME=file
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in find
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_FIND+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $FIND in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+FIND=$ac_cv_path_FIND
+if test -n "$FIND"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5
+$as_echo "$FIND" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$FIND" && break
+done
+
+
+ if test "x$FIND" = x; then
+ if test "xfind" = x; then
+ PROG_NAME=find
+ else
+ PROG_NAME=find
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in head
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_HEAD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $HEAD in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+HEAD=$ac_cv_path_HEAD
+if test -n "$HEAD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5
+$as_echo "$HEAD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$HEAD" && break
+done
+
+
+ if test "x$HEAD" = x; then
+ if test "xhead" = x; then
+ PROG_NAME=head
+ else
+ PROG_NAME=head
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in ln
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_LN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $LN in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LN="$LN" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+LN=$ac_cv_path_LN
+if test -n "$LN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5
+$as_echo "$LN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$LN" && break
+done
+
+
+ if test "x$LN" = x; then
+ if test "xln" = x; then
+ PROG_NAME=ln
+ else
+ PROG_NAME=ln
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in ls
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_LS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $LS in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LS="$LS" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+LS=$ac_cv_path_LS
+if test -n "$LS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5
+$as_echo "$LS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$LS" && break
+done
+
+
+ if test "x$LS" = x; then
+ if test "xls" = x; then
+ PROG_NAME=ls
+ else
+ PROG_NAME=ls
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in mkdir
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MKDIR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MKDIR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+MKDIR=$ac_cv_path_MKDIR
+if test -n "$MKDIR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5
+$as_echo "$MKDIR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MKDIR" && break
+done
+
+
+ if test "x$MKDIR" = x; then
+ if test "xmkdir" = x; then
+ PROG_NAME=mkdir
+ else
+ PROG_NAME=mkdir
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in mv
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MV+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MV in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MV="$MV" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+MV=$ac_cv_path_MV
+if test -n "$MV"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
+$as_echo "$MV" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$MV" && break
+done
+
+
+ if test "x$MV" = x; then
+ if test "xmv" = x; then
+ PROG_NAME=mv
+ else
+ PROG_NAME=mv
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in printf
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_PRINTF+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $PRINTF in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+PRINTF=$ac_cv_path_PRINTF
+if test -n "$PRINTF"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5
+$as_echo "$PRINTF" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$PRINTF" && break
+done
+
+
+ if test "x$PRINTF" = x; then
+ if test "xprintf" = x; then
+ PROG_NAME=printf
+ else
+ PROG_NAME=printf
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in sh
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_SH+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $SH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_SH="$SH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+SH=$ac_cv_path_SH
+if test -n "$SH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5
+$as_echo "$SH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$SH" && break
+done
+
+
+ if test "x$SH" = x; then
+ if test "xsh" = x; then
+ PROG_NAME=sh
+ else
+ PROG_NAME=sh
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in sort
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_SORT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $SORT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+SORT=$ac_cv_path_SORT
+if test -n "$SORT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
+$as_echo "$SORT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$SORT" && break
+done
+
+
+ if test "x$SORT" = x; then
+ if test "xsort" = x; then
+ PROG_NAME=sort
+ else
+ PROG_NAME=sort
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tail
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_TAIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $TAIL in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+TAIL=$ac_cv_path_TAIL
+if test -n "$TAIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5
+$as_echo "$TAIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$TAIL" && break
+done
+
+
+ if test "x$TAIL" = x; then
+ if test "xtail" = x; then
+ PROG_NAME=tail
+ else
+ PROG_NAME=tail
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_TAR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $TAR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+TAR=$ac_cv_path_TAR
+if test -n "$TAR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
+$as_echo "$TAR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$TAR" && break
+done
+
+
+ if test "x$TAR" = x; then
+ if test "xtar" = x; then
+ PROG_NAME=tar
+ else
+ PROG_NAME=tar
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tee
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_TEE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $TEE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_TEE="$TEE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+TEE=$ac_cv_path_TEE
+if test -n "$TEE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5
+$as_echo "$TEE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$TEE" && break
+done
+
+
+ if test "x$TEE" = x; then
+ if test "xtee" = x; then
+ PROG_NAME=tee
+ else
+ PROG_NAME=tee
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in touch
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_TOUCH+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $TOUCH in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+TOUCH=$ac_cv_path_TOUCH
+if test -n "$TOUCH"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5
+$as_echo "$TOUCH" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$TOUCH" && break
+done
+
+
+ if test "x$TOUCH" = x; then
+ if test "xtouch" = x; then
+ PROG_NAME=touch
+ else
+ PROG_NAME=touch
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tr
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_TR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $TR in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_TR="$TR" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+TR=$ac_cv_path_TR
+if test -n "$TR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5
+$as_echo "$TR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$TR" && break
+done
+
+
+ if test "x$TR" = x; then
+ if test "xtr" = x; then
+ PROG_NAME=tr
+ else
+ PROG_NAME=tr
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in uniq
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_UNIQ+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $UNIQ in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_UNIQ="$UNIQ" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_UNIQ="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+UNIQ=$ac_cv_path_UNIQ
+if test -n "$UNIQ"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNIQ" >&5
+$as_echo "$UNIQ" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$UNIQ" && break
+done
+
+
+ if test "x$UNIQ" = x; then
+ if test "xuniq" = x; then
+ PROG_NAME=uniq
+ else
+ PROG_NAME=uniq
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in unzip
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_UNZIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $UNZIP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+UNZIP=$ac_cv_path_UNZIP
+if test -n "$UNZIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5
+$as_echo "$UNZIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$UNZIP" && break
+done
+
+
+ if test "x$UNZIP" = x; then
+ if test "xunzip" = x; then
+ PROG_NAME=unzip
+ else
+ PROG_NAME=unzip
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in wc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_WC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $WC in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_WC="$WC" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+WC=$ac_cv_path_WC
+if test -n "$WC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
+$as_echo "$WC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$WC" && break
+done
+
+
+ if test "x$WC" = x; then
+ if test "xwc" = x; then
+ PROG_NAME=wc
+ else
+ PROG_NAME=wc
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in xargs
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_XARGS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $XARGS in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+XARGS=$ac_cv_path_XARGS
+if test -n "$XARGS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5
+$as_echo "$XARGS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$XARGS" && break
+done
+
+
+ if test "x$XARGS" = x; then
+ if test "xxargs" = x; then
+ PROG_NAME=xargs
+ else
+ PROG_NAME=xargs
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in zip
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_ZIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $ZIP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_ZIP="$ZIP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_ZIP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+ZIP=$ac_cv_path_ZIP
+if test -n "$ZIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIP" >&5
+$as_echo "$ZIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ZIP" && break
+done
+
+
+ if test "x$ZIP" = x; then
+ if test "xzip" = x; then
+ PROG_NAME=zip
+ else
+ PROG_NAME=zip
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+# Then required tools that require some special treatment.
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+
+ if test "x$AWK" = x; then
+ if test "x" = x; then
+ PROG_NAME=awk
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
if test "${ac_cv_path_GREP+set}" = set; then :
@@ -3785,455 +6391,16 @@
-# Start with tools that do not need have cross compilation support
-# and can be expected to be found in the default PATH. These tools are
-# used by configure. Nor are these tools expected to be found in the
-# devkit from the builddeps server either, since they are
-# needed to download the devkit.
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-
- # Test that variable AWK is not empty.
- if test "" = "$AWK"; then as_fn_error $? "Could not find awk !" "$LINENO" 5 ; fi
-
-# Extract the first word of "cat", so it can be a program name with args.
-set dummy cat; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CAT+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CAT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CAT="$CAT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CAT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CAT=$ac_cv_path_CAT
-if test -n "$CAT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CAT" >&5
-$as_echo "$CAT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable CAT is not empty.
- if test "" = "$CAT"; then as_fn_error $? "Could not find cat !" "$LINENO" 5 ; fi
-
-# Extract the first word of "chmod", so it can be a program name with args.
-set dummy chmod; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CHMOD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CHMOD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CHMOD="$CHMOD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CHMOD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CHMOD=$ac_cv_path_CHMOD
-if test -n "$CHMOD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHMOD" >&5
-$as_echo "$CHMOD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable CHMOD is not empty.
- if test "" = "$CHMOD"; then as_fn_error $? "Could not find chmod !" "$LINENO" 5 ; fi
-
-# Extract the first word of "cp", so it can be a program name with args.
-set dummy cp; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CP="$CP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CP=$ac_cv_path_CP
-if test -n "$CP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CP" >&5
-$as_echo "$CP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable CP is not empty.
- if test "" = "$CP"; then as_fn_error $? "Could not find cp !" "$LINENO" 5 ; fi
-
-# Extract the first word of "cpio", so it can be a program name with args.
-set dummy cpio; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CPIO+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CPIO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CPIO="$CPIO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CPIO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CPIO=$ac_cv_path_CPIO
-if test -n "$CPIO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPIO" >&5
-$as_echo "$CPIO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable CPIO is not empty.
- if test "" = "$CPIO"; then as_fn_error $? "Could not find cpio !" "$LINENO" 5 ; fi
-
-# Extract the first word of "cut", so it can be a program name with args.
-set dummy cut; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CUT+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CUT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CUT="$CUT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CUT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CUT=$ac_cv_path_CUT
-if test -n "$CUT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUT" >&5
-$as_echo "$CUT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable CUT is not empty.
- if test "" = "$CUT"; then as_fn_error $? "Could not find cut !" "$LINENO" 5 ; fi
-
-# Extract the first word of "date", so it can be a program name with args.
-set dummy date; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DATE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $DATE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DATE="$DATE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DATE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DATE=$ac_cv_path_DATE
-if test -n "$DATE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DATE" >&5
-$as_echo "$DATE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable DATE is not empty.
- if test "" = "$DATE"; then as_fn_error $? "Could not find date !" "$LINENO" 5 ; fi
-
-# Extract the first word of "df", so it can be a program name with args.
-set dummy df; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DF+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $DF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DF="$DF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DF=$ac_cv_path_DF
-if test -n "$DF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DF" >&5
-$as_echo "$DF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable DF is not empty.
- if test "" = "$DF"; then as_fn_error $? "Could not find df !" "$LINENO" 5 ; fi
-
-# Extract the first word of "diff", so it can be a program name with args.
-set dummy diff; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_DIFF+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $DIFF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_DIFF="$DIFF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_DIFF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-DIFF=$ac_cv_path_DIFF
-if test -n "$DIFF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DIFF" >&5
-$as_echo "$DIFF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable DIFF is not empty.
- if test "" = "$DIFF"; then as_fn_error $? "Could not find diff !" "$LINENO" 5 ; fi
-
-# Warning echo is really, really unportable!!!!! Different
-# behaviour in bash and dash and in a lot of other shells!
-# Use printf for serious work!
-# Extract the first word of "echo", so it can be a program name with args.
-set dummy echo; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ECHO+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $ECHO in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ECHO="$ECHO" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ECHO="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ECHO=$ac_cv_path_ECHO
-if test -n "$ECHO"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ECHO" >&5
-$as_echo "$ECHO" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable ECHO is not empty.
- if test "" = "$ECHO"; then as_fn_error $? "Could not find echo !" "$LINENO" 5 ; fi
+ if test "x$GREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=grep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
@@ -4303,8 +6470,16 @@
- # Test that variable EGREP is not empty.
- if test "" = "$EGREP"; then as_fn_error $? "Could not find egrep !" "$LINENO" 5 ; fi
+ if test "x$EGREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=egrep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
@@ -4374,597 +6549,17 @@
- # Test that variable FGREP is not empty.
- if test "" = "$FGREP"; then as_fn_error $? "Could not find fgrep !" "$LINENO" 5 ; fi
-
-
-# Extract the first word of "find", so it can be a program name with args.
-set dummy find; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_FIND+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $FIND in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FIND="$FIND" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_FIND="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FIND=$ac_cv_path_FIND
-if test -n "$FIND"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FIND" >&5
-$as_echo "$FIND" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable FIND is not empty.
- if test "" = "$FIND"; then as_fn_error $? "Could not find find !" "$LINENO" 5 ; fi
-
-
- # Test if find supports -delete
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5
-$as_echo_n "checking if find supports -delete... " >&6; }
- FIND_DELETE="-delete"
-
- DELETEDIR=`mktemp -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
-
- echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
-
- TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
- if test -f $DELETEDIR/TestIfFindSupportsDelete; then
- # No, it does not.
- rm $DELETEDIR/TestIfFindSupportsDelete
- FIND_DELETE="-exec rm \{\} \+"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- rmdir $DELETEDIR
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-
- # Test that variable GREP is not empty.
- if test "" = "$GREP"; then as_fn_error $? "Could not find grep !" "$LINENO" 5 ; fi
-
-# Extract the first word of "head", so it can be a program name with args.
-set dummy head; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_HEAD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $HEAD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HEAD="$HEAD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_HEAD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HEAD=$ac_cv_path_HEAD
-if test -n "$HEAD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HEAD" >&5
-$as_echo "$HEAD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable HEAD is not empty.
- if test "" = "$HEAD"; then as_fn_error $? "Could not find head !" "$LINENO" 5 ; fi
-
-# Extract the first word of "ln", so it can be a program name with args.
-set dummy ln; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_LN+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $LN in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LN="$LN" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_LN="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LN=$ac_cv_path_LN
-if test -n "$LN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LN" >&5
-$as_echo "$LN" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable LN is not empty.
- if test "" = "$LN"; then as_fn_error $? "Could not find ln !" "$LINENO" 5 ; fi
-
-# Extract the first word of "ls", so it can be a program name with args.
-set dummy ls; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_LS+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $LS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_LS="$LS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_LS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-LS=$ac_cv_path_LS
-if test -n "$LS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LS" >&5
-$as_echo "$LS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable LS is not empty.
- if test "" = "$LS"; then as_fn_error $? "Could not find ls !" "$LINENO" 5 ; fi
-
-for ac_prog in gmake make
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MAKE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $MAKE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MAKE="$MAKE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MAKE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MAKE=$ac_cv_path_MAKE
-if test -n "$MAKE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAKE" >&5
-$as_echo "$MAKE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$MAKE" && break
-done
-
-
- # Test that variable MAKE is not empty.
- if test "" = "$MAKE"; then as_fn_error $? "Could not find make !" "$LINENO" 5 ; fi
-
-MAKE_VERSION=`$MAKE --version | head -n 1 | grep '3.8[12346789]'`
-if test "x$MAKE_VERSION" = x; then
- as_fn_error $? "You must use GNU make 3.81 or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure." "$LINENO" 5
-fi
-# Extract the first word of "mkdir", so it can be a program name with args.
-set dummy mkdir; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MKDIR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $MKDIR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MKDIR="$MKDIR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MKDIR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MKDIR=$ac_cv_path_MKDIR
-if test -n "$MKDIR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR" >&5
-$as_echo "$MKDIR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable MKDIR is not empty.
- if test "" = "$MKDIR"; then as_fn_error $? "Could not find mkdir !" "$LINENO" 5 ; fi
-
-# Extract the first word of "mv", so it can be a program name with args.
-set dummy mv; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_MV+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $MV in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_MV="$MV" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_MV="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-MV=$ac_cv_path_MV
-if test -n "$MV"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MV" >&5
-$as_echo "$MV" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable MV is not empty.
- if test "" = "$MV"; then as_fn_error $? "Could not find mv !" "$LINENO" 5 ; fi
-
-for ac_prog in nawk gawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_NAWK+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $NAWK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-NAWK=$ac_cv_path_NAWK
-if test -n "$NAWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5
-$as_echo "$NAWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$NAWK" && break
-done
-
-
- # Test that variable NAWK is not empty.
- if test "" = "$NAWK"; then as_fn_error $? "Could not find nawk !" "$LINENO" 5 ; fi
-
-# Extract the first word of "printf", so it can be a program name with args.
-set dummy printf; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_PRINTF+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $PRINTF in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_PRINTF="$PRINTF" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_PRINTF="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-PRINTF=$ac_cv_path_PRINTF
-if test -n "$PRINTF"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PRINTF" >&5
-$as_echo "$PRINTF" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable PRINTF is not empty.
- if test "" = "$PRINTF"; then as_fn_error $? "Could not find printf !" "$LINENO" 5 ; fi
-
-# Extract the first word of "pwd", so it can be a program name with args.
-set dummy pwd; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_THEPWDCMD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $THEPWDCMD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_THEPWDCMD="$THEPWDCMD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_THEPWDCMD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-THEPWDCMD=$ac_cv_path_THEPWDCMD
-if test -n "$THEPWDCMD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $THEPWDCMD" >&5
-$as_echo "$THEPWDCMD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-# Extract the first word of "rm", so it can be a program name with args.
-set dummy rm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_RM+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $RM in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_RM="$RM" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-RM=$ac_cv_path_RM
-if test -n "$RM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
-$as_echo "$RM" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable RM is not empty.
- if test "" = "$RM"; then as_fn_error $? "Could not find rm !" "$LINENO" 5 ; fi
-
-RM="$RM -f"
+ if test "x$FGREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=fgrep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if test "${ac_cv_path_SED+set}" = set; then :
@@ -5035,492 +6630,746 @@
rm -f conftest.sed
- # Test that variable SED is not empty.
- if test "" = "$SED"; then as_fn_error $? "Could not find sed !" "$LINENO" 5 ; fi
-
-# Extract the first word of "sh", so it can be a program name with args.
-set dummy sh; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_SH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $SH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SH="$SH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_SH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SH=$ac_cv_path_SH
-if test -n "$SH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SH" >&5
-$as_echo "$SH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable SH is not empty.
- if test "" = "$SH"; then as_fn_error $? "Could not find sh !" "$LINENO" 5 ; fi
-
-# Extract the first word of "sort", so it can be a program name with args.
-set dummy sort; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_SORT+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $SORT in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_SORT="$SORT" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_SORT="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-SORT=$ac_cv_path_SORT
-if test -n "$SORT"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SORT" >&5
-$as_echo "$SORT" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable SORT is not empty.
- if test "" = "$SORT"; then as_fn_error $? "Could not find sort !" "$LINENO" 5 ; fi
-
-# Extract the first word of "tar", so it can be a program name with args.
-set dummy tar; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_TAR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAR="$TAR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TAR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAR=$ac_cv_path_TAR
-if test -n "$TAR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAR" >&5
-$as_echo "$TAR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable TAR is not empty.
- if test "" = "$TAR"; then as_fn_error $? "Could not find tar !" "$LINENO" 5 ; fi
-
-# Extract the first word of "tail", so it can be a program name with args.
-set dummy tail; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_TAIL+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $TAIL in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TAIL="$TAIL" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TAIL="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TAIL=$ac_cv_path_TAIL
-if test -n "$TAIL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TAIL" >&5
-$as_echo "$TAIL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable TAIL is not empty.
- if test "" = "$TAIL"; then as_fn_error $? "Could not find tail !" "$LINENO" 5 ; fi
-
-# Extract the first word of "tee", so it can be a program name with args.
-set dummy tee; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_TEE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $TEE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TEE="$TEE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TEE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TEE=$ac_cv_path_TEE
-if test -n "$TEE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEE" >&5
-$as_echo "$TEE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable TEE is not empty.
- if test "" = "$TEE"; then as_fn_error $? "Could not find tee !" "$LINENO" 5 ; fi
-
-# Extract the first word of "tr", so it can be a program name with args.
-set dummy tr; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_TR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $TR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TR="$TR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TR=$ac_cv_path_TR
-if test -n "$TR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TR" >&5
-$as_echo "$TR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable TR is not empty.
- if test "" = "$TR"; then as_fn_error $? "Could not find tr !" "$LINENO" 5 ; fi
-
-# Extract the first word of "touch", so it can be a program name with args.
-set dummy touch; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_TOUCH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $TOUCH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_TOUCH="$TOUCH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_TOUCH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-TOUCH=$ac_cv_path_TOUCH
-if test -n "$TOUCH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $TOUCH" >&5
-$as_echo "$TOUCH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable TOUCH is not empty.
- if test "" = "$TOUCH"; then as_fn_error $? "Could not find touch !" "$LINENO" 5 ; fi
-
-# Extract the first word of "wc", so it can be a program name with args.
-set dummy wc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_WC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $WC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WC="$WC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_WC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WC=$ac_cv_path_WC
-if test -n "$WC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WC" >&5
-$as_echo "$WC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable WC is not empty.
- if test "" = "$WC"; then as_fn_error $? "Could not find wc !" "$LINENO" 5 ; fi
-
-# Extract the first word of "xargs", so it can be a program name with args.
-set dummy xargs; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_XARGS+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $XARGS in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XARGS="$XARGS" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XARGS="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XARGS=$ac_cv_path_XARGS
-if test -n "$XARGS"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XARGS" >&5
-$as_echo "$XARGS" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable XARGS is not empty.
- if test "" = "$XARGS"; then as_fn_error $? "Could not find xargs !" "$LINENO" 5 ; fi
-
-# Extract the first word of "zip", so it can be a program name with args.
-set dummy zip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_ZIP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $ZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_ZIP="$ZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_ZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-ZIP=$ac_cv_path_ZIP
-if test -n "$ZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ZIP" >&5
-$as_echo "$ZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable ZIP is not empty.
- if test "" = "$ZIP"; then as_fn_error $? "Could not find zip !" "$LINENO" 5 ; fi
-
-# Extract the first word of "unzip", so it can be a program name with args.
-set dummy unzip; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_UNZIP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $UNZIP in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_UNZIP="$UNZIP" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_UNZIP="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-UNZIP=$ac_cv_path_UNZIP
-if test -n "$UNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $UNZIP" >&5
-$as_echo "$UNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable UNZIP is not empty.
- if test "" = "$UNZIP"; then as_fn_error $? "Could not find unzip !" "$LINENO" 5 ; fi
+ if test "x$SED" = x; then
+ if test "x" = x; then
+ PROG_NAME=sed
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+for ac_prog in nawk gawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_NAWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $NAWK in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_NAWK="$NAWK" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_NAWK="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+NAWK=$ac_cv_path_NAWK
+if test -n "$NAWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NAWK" >&5
+$as_echo "$NAWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$NAWK" && break
+done
+
+
+ if test "x$NAWK" = x; then
+ if test "x" = x; then
+ PROG_NAME=nawk
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ # We need to find a recent version of GNU make. Especially on Solaris, this can be tricky.
+ if test "x$MAKE" != x; then
+ # User has supplied a make, test it.
+ if test ! -f "$MAKE"; then
+ as_fn_error $? "The specified make (by MAKE=$MAKE) is not found." "$LINENO" 5
+ fi
+
+ MAKE_CANDIDATE=""$MAKE""
+ DESCRIPTION="user supplied MAKE="
+ if test "x$MAKE_CANDIDATE" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
+$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$MAKE_CANDIDATE"
+ car="${tmp%% *}"
+ tmp="$MAKE_CANDIDATE EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ MAKE_CANDIDATE="$car ${cdr% *}"
+ else
+ MAKE_CANDIDATE="$car"
+ fi
+
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
+$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[12346789]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
+$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ as_fn_error $? "The specified make (by MAKE=$MAKE) is not GNU make 3.81 or newer." "$LINENO" 5
+ fi
+ else
+ # Try our hardest to locate a correct version of GNU make
+ for ac_prog in gmake
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CHECK_GMAKE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CHECK_GMAKE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CHECK_GMAKE="$CHECK_GMAKE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CHECK_GMAKE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CHECK_GMAKE=$ac_cv_path_CHECK_GMAKE
+if test -n "$CHECK_GMAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_GMAKE" >&5
+$as_echo "$CHECK_GMAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CHECK_GMAKE" && break
+done
+
+
+ MAKE_CANDIDATE=""$CHECK_GMAKE""
+ DESCRIPTION="gmake in PATH"
+ if test "x$MAKE_CANDIDATE" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
+$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$MAKE_CANDIDATE"
+ car="${tmp%% *}"
+ tmp="$MAKE_CANDIDATE EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ MAKE_CANDIDATE="$car ${cdr% *}"
+ else
+ MAKE_CANDIDATE="$car"
+ fi
+
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
+$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[12346789]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
+$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+
+
+ if test "x$FOUND_MAKE" = x; then
+ for ac_prog in make
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CHECK_MAKE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CHECK_MAKE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CHECK_MAKE="$CHECK_MAKE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CHECK_MAKE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CHECK_MAKE=$ac_cv_path_CHECK_MAKE
+if test -n "$CHECK_MAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_MAKE" >&5
+$as_echo "$CHECK_MAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CHECK_MAKE" && break
+done
+
+
+ MAKE_CANDIDATE=""$CHECK_MAKE""
+ DESCRIPTION="make in PATH"
+ if test "x$MAKE_CANDIDATE" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
+$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$MAKE_CANDIDATE"
+ car="${tmp%% *}"
+ tmp="$MAKE_CANDIDATE EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ MAKE_CANDIDATE="$car ${cdr% *}"
+ else
+ MAKE_CANDIDATE="$car"
+ fi
+
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
+$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[12346789]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
+$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ if test "x$TOOLS_DIR" != x; then
+ # We have a tools-dir, check that as well before giving up.
+ OLD_PATH=$PATH
+ PATH=$TOOLS_DIR:$PATH
+ for ac_prog in gmake
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CHECK_TOOLSDIR_GMAKE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CHECK_TOOLSDIR_GMAKE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CHECK_TOOLSDIR_GMAKE="$CHECK_TOOLSDIR_GMAKE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CHECK_TOOLSDIR_GMAKE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CHECK_TOOLSDIR_GMAKE=$ac_cv_path_CHECK_TOOLSDIR_GMAKE
+if test -n "$CHECK_TOOLSDIR_GMAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_GMAKE" >&5
+$as_echo "$CHECK_TOOLSDIR_GMAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CHECK_TOOLSDIR_GMAKE" && break
+done
+
+
+ MAKE_CANDIDATE=""$CHECK_TOOLSDIR_GMAKE""
+ DESCRIPTION="gmake in tools-dir"
+ if test "x$MAKE_CANDIDATE" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
+$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$MAKE_CANDIDATE"
+ car="${tmp%% *}"
+ tmp="$MAKE_CANDIDATE EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ MAKE_CANDIDATE="$car ${cdr% *}"
+ else
+ MAKE_CANDIDATE="$car"
+ fi
+
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
+$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[12346789]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
+$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ for ac_prog in make
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CHECK_TOOLSDIR_MAKE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CHECK_TOOLSDIR_MAKE in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CHECK_TOOLSDIR_MAKE="$CHECK_TOOLSDIR_MAKE" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CHECK_TOOLSDIR_MAKE="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CHECK_TOOLSDIR_MAKE=$ac_cv_path_CHECK_TOOLSDIR_MAKE
+if test -n "$CHECK_TOOLSDIR_MAKE"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CHECK_TOOLSDIR_MAKE" >&5
+$as_echo "$CHECK_TOOLSDIR_MAKE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CHECK_TOOLSDIR_MAKE" && break
+done
+
+
+ MAKE_CANDIDATE=""$CHECK_TOOLSDIR_MAKE""
+ DESCRIPTION="make in tools-dir"
+ if test "x$MAKE_CANDIDATE" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&5
+$as_echo "$as_me: Testing potential make at $MAKE_CANDIDATE, found using $DESCRIPTION" >&6;}
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$MAKE_CANDIDATE"
+ car="${tmp%% *}"
+ tmp="$MAKE_CANDIDATE EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ MAKE_CANDIDATE="$car ${cdr% *}"
+ else
+ MAKE_CANDIDATE="$car"
+ fi
+
+ MAKE_VERSION_STRING=`$MAKE_CANDIDATE --version | $HEAD -n 1`
+ IS_GNU_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP 'GNU Make'`
+ if test "x$IS_GNU_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&5
+$as_echo "$as_me: Found potential make at $MAKE_CANDIDATE, however, this is not GNU Make. Ignoring." >&6;}
+ else
+ IS_MODERN_MAKE=`$ECHO $MAKE_VERSION_STRING | $GREP '3.8[12346789]'`
+ if test "x$IS_MODERN_MAKE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&5
+$as_echo "$as_me: Found GNU make at $MAKE_CANDIDATE, however this is not version 3.81 or later. (it is: $MAKE_VERSION_STRING). Ignoring." >&6;}
+ else
+ FOUND_MAKE=$MAKE_CANDIDATE
+ fi
+ fi
+ fi
+
+ fi
+ PATH=$OLD_PATH
+ fi
+ fi
+
+ if test "x$FOUND_MAKE" = x; then
+ as_fn_error $? "Cannot find GNU make 3.81 or newer! Please put it in the path, or add e.g. MAKE=/opt/gmake3.81/make as argument to configure." "$LINENO" 5
+ fi
+ fi
+
+ MAKE=$FOUND_MAKE
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using GNU make 3.81 (or later) at $FOUND_MAKE (version: $MAKE_VERSION_STRING)" >&5
+$as_echo "$as_me: Using GNU make 3.81 (or later) at $FOUND_MAKE (version: $MAKE_VERSION_STRING)" >&6;}
+
+
+
+ for ac_prog in rm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_RM+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $RM in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_RM="$RM" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_RM="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+RM=$ac_cv_path_RM
+if test -n "$RM"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RM" >&5
+$as_echo "$RM" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$RM" && break
+done
+
+
+ if test "x$RM" = x; then
+ if test "xrm" = x; then
+ PROG_NAME=rm
+ else
+ PROG_NAME=rm
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+RM="$RM -f"
+
+
+ # Test if find supports -delete
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5
+$as_echo_n "checking if find supports -delete... " >&6; }
+ FIND_DELETE="-delete"
+
+ DELETEDIR=`mktemp -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
+
+ echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
+
+ TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
+ if test -f $DELETEDIR/TestIfFindSupportsDelete; then
+ # No, it does not.
+ rm $DELETEDIR/TestIfFindSupportsDelete
+ FIND_DELETE="-exec rm \{\} \+"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
+ rmdir $DELETEDIR
+
+
+
+# Non-required basic tools
+
+# Extract the first word of "pwd", so it can be a program name with args.
+set dummy pwd; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_THEPWDCMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $THEPWDCMD in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_THEPWDCMD="$THEPWDCMD" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_THEPWDCMD="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+THEPWDCMD=$ac_cv_path_THEPWDCMD
+if test -n "$THEPWDCMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $THEPWDCMD" >&5
+$as_echo "$THEPWDCMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
# Extract the first word of "ldd", so it can be a program name with args.
set dummy ldd; ac_word=$2
@@ -5611,8 +7460,10 @@
if test "x$OTOOL" = "x"; then
OTOOL="true"
fi
-# Extract the first word of "readelf", so it can be a program name with args.
-set dummy readelf; ac_word=$2
+for ac_prog in readelf greadelf
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_path_READELF+set}" = set; then :
@@ -5651,93 +7502,53 @@
fi
-# Extract the first word of "expr", so it can be a program name with args.
-set dummy expr; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_EXPR+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $EXPR in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_EXPR="$EXPR" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_EXPR="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-EXPR=$ac_cv_path_EXPR
-if test -n "$EXPR"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $EXPR" >&5
-$as_echo "$EXPR" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable EXPR is not empty.
- if test "" = "$EXPR"; then as_fn_error $? "Could not find expr !" "$LINENO" 5 ; fi
-
-# Extract the first word of "file", so it can be a program name with args.
-set dummy file; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_FILE+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $FILE in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_FILE="$FILE" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_FILE="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-FILE=$ac_cv_path_FILE
-if test -n "$FILE"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FILE" >&5
-$as_echo "$FILE" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-
- # Test that variable FILE is not empty.
- if test "" = "$FILE"; then as_fn_error $? "Could not find file !" "$LINENO" 5 ; fi
+ test -n "$READELF" && break
+done
+
+for ac_prog in objdump gobjdump
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $OBJDUMP in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_OBJDUMP="$OBJDUMP" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_OBJDUMP="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+OBJDUMP=$ac_cv_path_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$OBJDUMP" && break
+done
# Extract the first word of "hg", so it can be a program name with args.
set dummy hg; ac_word=$2
@@ -5781,199 +7592,6 @@
-# Setup builddeps, for automatic downloading of tools we need.
-# This is needed before we can call BDEPS_CHECK_MODULE, which is done in
-# boot-jdk setup, but we need to have basic tools setup first.
-
-
-# Check whether --with-builddeps-conf was given.
-if test "${with_builddeps_conf+set}" = set; then :
- withval=$with_builddeps_conf;
-fi
-
-
-
-# Check whether --with-builddeps-server was given.
-if test "${with_builddeps_server+set}" = set; then :
- withval=$with_builddeps_server;
-fi
-
-
-
-# Check whether --with-builddeps-dir was given.
-if test "${with_builddeps_dir+set}" = set; then :
- withval=$with_builddeps_dir;
-else
- with_builddeps_dir=/localhome/builddeps
-fi
-
-
-
-# Check whether --with-builddeps-group was given.
-if test "${with_builddeps_group+set}" = set; then :
- withval=$with_builddeps_group;
-fi
-
-
-# Check whether --enable-list-builddeps was given.
-if test "${enable_list_builddeps+set}" = set; then :
- enableval=$enable_list_builddeps; LIST_BUILDDEPS="${enableval}"
-else
- LIST_BUILDDEPS='no'
-fi
-
-
-if test "x$LIST_BUILDDEPS" = xyes; then
- echo
- echo List of build dependencies known to the configure script,
- echo that can be used in builddeps.conf files:
- cat $AUTOCONF_DIR/*.ac $AUTOCONF_DIR/*.m4 | grep BDEPS_CHECK_MODULE\( | cut -f 2 -d ',' | tr -d ' ' | sort
- echo
- exit 1
-fi
-
-
-
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- if test "x$with_builddeps_conf" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for supplied builddeps configuration file" >&5
-$as_echo_n "checking for supplied builddeps configuration file... " >&6; }
- builddepsfile=$with_builddeps_conf
- if test -s $builddepsfile; then
- . $builddepsfile
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: loaded!" >&5
-$as_echo "loaded!" >&6; }
- else
- as_fn_error $? "The given builddeps conf file $with_builddeps_conf could not be loaded!" "$LINENO" 5
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builddeps.conf files in sources..." >&5
-$as_echo_n "checking for builddeps.conf files in sources...... " >&6; }
- builddepsfile=`mktemp`
- touch $builddepsfile
- # Put all found confs into a single file.
- find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
- # Source the file to acquire the variables
- if test -s $builddepsfile; then
- . $builddepsfile
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: found at least one!" >&5
-$as_echo "found at least one!" >&6; }
- else
- as_fn_error $? "Could not find any builddeps.conf at all!" "$LINENO" 5
- fi
- fi
- # Create build and target names that use _ instead of "-" and ".".
- # This is necessary to use them in variable names.
- build_var=`echo ${OPENJDK_BUILD_SYSTEM} | tr '-' '_' | tr '.' '_'`
- target_var=`echo ${OPENJDK_TARGET_SYSTEM} | tr '-' '_' | tr '.' '_'`
- # Extract rewrite information for build and target
- eval rewritten_build=\${REWRITE_${build_var}}
- if test "x$rewritten_build" = x; then
- rewritten_build=${OPENJDK_BUILD_SYSTEM}
- echo Build stays the same $rewritten_build
- else
- echo Rewriting build for builddeps into $rewritten_build
- fi
- eval rewritten_target=\${REWRITE_${target_var}}
- if test "x$rewritten_target" = x; then
- rewritten_target=${OPENJDK_TARGET_SYSTEM}
- echo Target stays the same $rewritten_target
- else
- echo Rewriting target for builddeps into $rewritten_target
- fi
- rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
- rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
- fi
- for ac_prog in 7z unzip
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_BDEPS_UNZIP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$BDEPS_UNZIP"; then
- ac_cv_prog_BDEPS_UNZIP="$BDEPS_UNZIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BDEPS_UNZIP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-BDEPS_UNZIP=$ac_cv_prog_BDEPS_UNZIP
-if test -n "$BDEPS_UNZIP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_UNZIP" >&5
-$as_echo "$BDEPS_UNZIP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BDEPS_UNZIP" && break
-done
-
- if test "x$BDEPS_UNZIP" = x7z; then
- BDEPS_UNZIP="7z x"
- fi
-
- for ac_prog in wget lftp ftp
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_BDEPS_FTP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$BDEPS_FTP"; then
- ac_cv_prog_BDEPS_FTP="$BDEPS_FTP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_BDEPS_FTP="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-BDEPS_FTP=$ac_cv_prog_BDEPS_FTP
-if test -n "$BDEPS_FTP"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_FTP" >&5
-$as_echo "$BDEPS_FTP" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$BDEPS_FTP" && break
-done
-
-
-
# Check if pkg-config is available.
@@ -6092,676 +7710,7 @@
fi
-###############################################################################
-#
-# Determine OpenJDK build and target platforms.
-#
-###############################################################################
-
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
- as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
- ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
-test "x$ac_build_alias" = x &&
- as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
-ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
-$as_echo "$ac_cv_build" >&6; }
-case $ac_cv_build in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
-esac
-build=$ac_cv_build
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_build
-shift
-build_cpu=$1
-build_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-build_os=$*
-IFS=$ac_save_IFS
-case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
-$as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$host_alias" = x; then
- ac_cv_host=$ac_cv_build
-else
- ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
-$as_echo "$ac_cv_host" >&6; }
-case $ac_cv_host in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
-esac
-host=$ac_cv_host
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_host
-shift
-host_cpu=$1
-host_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-host_os=$*
-IFS=$ac_save_IFS
-case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
-$as_echo_n "checking target system type... " >&6; }
-if test "${ac_cv_target+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test "x$target_alias" = x; then
- ac_cv_target=$ac_cv_host
-else
- ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
- as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
-$as_echo "$ac_cv_target" >&6; }
-case $ac_cv_target in
-*-*-*) ;;
-*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;;
-esac
-target=$ac_cv_target
-ac_save_IFS=$IFS; IFS='-'
-set x $ac_cv_target
-shift
-target_cpu=$1
-target_vendor=$2
-shift; shift
-# Remember, the first character of IFS is used to create $*,
-# except with old shells:
-target_os=$*
-IFS=$ac_save_IFS
-case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
-
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-test -n "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-# Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
-# is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
-# product you're building. The target of this build is called "host". Since this is confusing to most people, we
-# have not adopted that system, but use "target" as the platform we are building for. In some places though we need
-# to use the configure naming style.
-
-
-
-
-
-# Check whether --with-target-bits was given.
-if test "${with_target_bits+set}" = set; then :
- withval=$with_target_bits;
-fi
-
-
-if test "x$with_target_bits" != x && \
- test "x$with_target_bits" != x32 && \
- test "x$with_target_bits" != x64 ; then
- as_fn_error $? "--with-target-bits can only be 32 or 64, you specified $with_target_bits!" "$LINENO" 5
-fi
-# Translate the standard cpu-vendor-kernel-os quadruplets into
-# the new TARGET_.... and BUILD_... and the legacy names used by
-# the openjdk build.
-# It uses $host_os $host_cpu $build_os $build_cpu and $with_target_bits
-
- # Expects $host_os $host_cpu $build_os and $build_cpu
- # and $with_target_bits to have been setup!
- #
- # Translate the standard triplet(quadruplet) definition
- # of the target/build system into
- # OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows
- # OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince
- # OPENJDK_TARGET_OS_API=posix,winapi
- #
- # OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64
- # OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm
- # OPENJDK_TARGET_CPU_BITS=32,64
- # OPENJDK_TARGET_CPU_ENDIAN=big,little
- #
- # The same values are setup for BUILD_...
- #
- # And the legacy variables, for controlling the old makefiles.
- # LEGACY_OPENJDK_TARGET_CPU1=i586,amd64/x86_64,sparc,sparcv9,arm,arm64...
- # LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,sparc,sparcv9,arm,arm64...
- # LEGACY_OPENJDK_TARGET_CPU3=sparcv9,amd64 (but only on solaris)
- # LEGACY_OPENJDK_TARGET_OS_API=solaris,windows
- #
- # We also copy the autoconf trip/quadruplet
- # verbatim to OPENJDK_TARGET_SYSTEM (from the autoconf "host") and OPENJDK_BUILD_SYSTEM
- OPENJDK_TARGET_SYSTEM="$host"
- OPENJDK_BUILD_SYSTEM="$build"
-
-
-
-
-
- case "$host_os" in
- *linux*)
- VAR_OS=linux
- VAR_OS_API=posix
- VAR_OS_FAMILY=gnu
- ;;
- *solaris*)
- VAR_OS=solaris
- VAR_OS_API=posix
- VAR_OS_FAMILY=sysv
- ;;
- *darwin*)
- VAR_OS=macosx
- VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
- ;;
- *bsd*)
- VAR_OS=bsd
- VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
- ;;
- *cygwin*|*windows*)
- VAR_OS=windows
- VAR_OS_API=winapi
- VAR_OS_FAMILY=windows
- ;;
- *)
- as_fn_error $? "unsupported operating system $host_os" "$LINENO" 5
- ;;
- esac
-
- OPENJDK_TARGET_OS="$VAR_OS"
- OPENJDK_TARGET_OS_FAMILY="$VAR_OS_FAMILY"
- OPENJDK_TARGET_OS_API="$VAR_OS_API"
-
-
-
-
-
- if test "x$OPENJDK_TARGET_OS_API" = xposix; then
- LEGACY_OPENJDK_TARGET_OS_API="solaris"
- fi
- if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
- LEGACY_OPENJDK_TARGET_OS_API="windows"
- fi
-
-
-
-
- # First argument is the cpu name from the trip/quad
- case "$host_cpu" in
- x86_64)
- VAR_CPU=x64
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=amd64
- ;;
- i?86)
- VAR_CPU=ia32
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=i586
- ;;
- alpha*)
- VAR_CPU=alpha
- VAR_CPU_ARCH=alpha
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=alpha
- ;;
- arm*)
- VAR_CPU=arm
- VAR_CPU_ARCH=arm
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=arm
- ;;
- mips)
- VAR_CPU=mips
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mips
- ;;
- mipsel)
- VAR_CPU=mipsel
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mipsel
- ;;
- powerpc)
- VAR_CPU=ppc
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc
- ;;
- powerpc64)
- VAR_CPU=ppc64
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc64
- ;;
- sparc)
- VAR_CPU=sparc
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparc
- ;;
- sparc64)
- VAR_CPU=sparcv9
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparcv9
- ;;
- s390)
- VAR_CPU=s390
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390
- VAR_LEGACY_CPU=s390
- ;;
- s390x)
- VAR_CPU=s390x
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390x
- ;;
- *)
- as_fn_error $? "unsupported cpu $host_cpu" "$LINENO" 5
- ;;
- esac
-
- # Workaround cygwin not knowing about 64 bit.
- if test "x$VAR_OS" = "xwindows"; then
- if test "x$PROCESSOR_IDENTIFIER" != "x"; then
- PROC_ARCH=`echo $PROCESSOR_IDENTIFIER | $CUT -f1 -d' '`
- case "$PROC_ARCH" in
- intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64)
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- ;;
- esac
- fi
- fi
-
- # on solaris x86...default seems to be 32-bit
- if test "x$VAR_OS" = "xsolaris" && \
- test "x$with_target_bits" = "x" && \
- test "x$VAR_CPU_ARCH" = "xx86"
- then
- with_target_bits=32
- fi
-
- if test "x$VAR_CPU_ARCH" = "xx86"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- fi
- if test "x$with_target_bits" = "x32"; then
- VAR_CPU=ia32
- VAR_CPU_BITS=32
- VAR_LEGACY_CPU=i586
- fi
- fi
-
- if test "x$VAR_CPU_ARCH" = "xsparc"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=sparcv9
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=sparcv9
- fi
- fi
-
- OPENJDK_TARGET_CPU="$VAR_CPU"
- OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of ia32 and x64
- LEGACY_OPENJDK_TARGET_CPU1="$VAR_LEGACY_CPU"
-
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of ia32 and x64.
- LEGACY_OPENJDK_TARGET_CPU2="$LEGACY_OPENJDK_TARGET_CPU1"
- if test "x$LEGACY_OPENJDK_TARGET_CPU1" = xi586; then
- LEGACY_OPENJDK_TARGET_CPU2=i386
- fi
-
-
- # And the third legacy naming of the cpu.
- # Ie only amd64 or sparcv9, used for the ISA_DIR on Solaris.
- LEGACY_OPENJDK_TARGET_CPU3=""
- if test "x$OPENJDK_TARGET_CPU" = xx64; then
- LEGACY_OPENJDK_TARGET_CPU3=amd64
- fi
- if test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- LEGACY_OPENJDK_TARGET_CPU3=sparcv9
- fi
-
-
-
-
-
- case "$build_os" in
- *linux*)
- VAR_OS=linux
- VAR_OS_API=posix
- VAR_OS_FAMILY=gnu
- ;;
- *solaris*)
- VAR_OS=solaris
- VAR_OS_API=posix
- VAR_OS_FAMILY=sysv
- ;;
- *darwin*)
- VAR_OS=macosx
- VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
- ;;
- *bsd*)
- VAR_OS=bsd
- VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
- ;;
- *cygwin*|*windows*)
- VAR_OS=windows
- VAR_OS_API=winapi
- VAR_OS_FAMILY=windows
- ;;
- *)
- as_fn_error $? "unsupported operating system $build_os" "$LINENO" 5
- ;;
- esac
-
- OPENJDK_BUILD_OS="$VAR_OS"
- OPENJDK_BUILD_OS_FAMILY="$VAR_OS_FAMILY"
- OPENJDK_BUILD_OS_API="$VAR_OS_API"
-
-
-
-
-
- if test "x$OPENJDK_BUILD_OS_API" = xposix; then
- LEGACY_OPENJDK_BUILD_OS_API="solaris"
- fi
- if test "x$OPENJDK_BUILD_OS_API" = xwinapi; then
- LEGACY_OPENJDK_BUILD_OS_API="windows"
- fi
-
-
-
-
- # First argument is the cpu name from the trip/quad
- case "$build_cpu" in
- x86_64)
- VAR_CPU=x64
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=amd64
- ;;
- i?86)
- VAR_CPU=ia32
- VAR_CPU_ARCH=x86
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=i586
- ;;
- alpha*)
- VAR_CPU=alpha
- VAR_CPU_ARCH=alpha
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=alpha
- ;;
- arm*)
- VAR_CPU=arm
- VAR_CPU_ARCH=arm
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=arm
- ;;
- mips)
- VAR_CPU=mips
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mips
- ;;
- mipsel)
- VAR_CPU=mipsel
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mipsel
- ;;
- powerpc)
- VAR_CPU=ppc
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc
- ;;
- powerpc64)
- VAR_CPU=ppc64
- VAR_CPU_ARCH=ppc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc64
- ;;
- sparc)
- VAR_CPU=sparc
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparc
- ;;
- sparc64)
- VAR_CPU=sparcv9
- VAR_CPU_ARCH=sparc
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparcv9
- ;;
- s390)
- VAR_CPU=s390
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390
- VAR_LEGACY_CPU=s390
- ;;
- s390x)
- VAR_CPU=s390x
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390x
- ;;
- *)
- as_fn_error $? "unsupported cpu $build_cpu" "$LINENO" 5
- ;;
- esac
-
- # Workaround cygwin not knowing about 64 bit.
- if test "x$VAR_OS" = "xwindows"; then
- if test "x$PROCESSOR_IDENTIFIER" != "x"; then
- PROC_ARCH=`echo $PROCESSOR_IDENTIFIER | $CUT -f1 -d' '`
- case "$PROC_ARCH" in
- intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64)
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- ;;
- esac
- fi
- fi
-
- # on solaris x86...default seems to be 32-bit
- if test "x$VAR_OS" = "xsolaris" && \
- test "x$with_target_bits" = "x" && \
- test "x$VAR_CPU_ARCH" = "xx86"
- then
- with_target_bits=32
- fi
-
- if test "x$VAR_CPU_ARCH" = "xx86"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- fi
- if test "x$with_target_bits" = "x32"; then
- VAR_CPU=ia32
- VAR_CPU_BITS=32
- VAR_LEGACY_CPU=i586
- fi
- fi
-
- if test "x$VAR_CPU_ARCH" = "xsparc"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=sparcv9
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=sparcv9
- fi
- fi
-
- OPENJDK_BUILD_CPU="$VAR_CPU"
- OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of ia32 and x64
- LEGACY_OPENJDK_BUILD_CPU1="$VAR_LEGACY_CPU"
-
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of ia32 and x64.
- LEGACY_OPENJDK_BUILD_CPU2="$LEGACY_OPENJDK_BUILD_CPU1"
- if test "x$LEGACY_OPENJDK_BUILD_CPU1" = xi586; then
- LEGACY_OPENJDK_BUILD_CPU2=i386
- fi
-
-
- # And the third legacy naming of the cpu.
- # Ie only amd64 or sparcv9, used for the ISA_DIR on Solaris.
- LEGACY_OPENJDK_BUILD_CPU3=""
- if test "x$OPENJDK_BUILD_CPU" = xx64; then
- LEGACY_OPENJDK_BUILD_CPU3=amd64
- fi
- if test "x$OPENJDK_BUILD_CPU" = xsparcv9; then
- LEGACY_OPENJDK_BUILD_CPU3=sparcv9
- fi
-
-
-
- if test "x$OPENJDK_TARGET_OS" != xsolaris; then
- LEGACY_OPENJDK_TARGET_CPU3=""
- LEGACY_OPENJDK_BUILD_CPU3=""
- fi
-
- # On MacOSX and MacOSX only, we have a different name for the x64 CPU in ARCH (LEGACY_OPENJDK_TARGET_CPU1) ...
- if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$OPENJDK_TARGET_CPU" = xx64; then
- LEGACY_OPENJDK_TARGET_CPU1="x86_64"
- fi
-
-
- if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- REQUIRED_OS_NAME=SunOS
- REQUIRED_OS_VERSION=5.10
- fi
- if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
- REQUIRED_OS_NAME=Linux
- REQUIRED_OS_VERSION=2.6
- fi
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- REQUIRED_OS_NAME=Windows
- REQUIRED_OS_VERSION=5.1
- fi
- if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- REQUIRED_OS_NAME=Darwin
- REQUIRED_OS_VERSION=11.2
- fi
-
-
-
-
-
-
-# The LEGACY_OPENJDK_TARGET_CPU3 is the setting for ISA_DIR.
-if test "x$LEGACY_OPENJDK_TARGET_CPU3" != x; then
- LEGACY_OPENJDK_TARGET_CPU3="/${LEGACY_OPENJDK_TARGET_CPU3}"
-fi
-
-# Now the following vars are defined.
-# OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows
-# OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince
-# OPENJDK_TARGET_OS_API=posix,winapi
-#
-# OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64
-# OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm
-# OPENJDK_TARGET_CPU_BITS=32,64
-# OPENJDK_TARGET_CPU_ENDIAN=big,little
-#
-# There is also a:
-# LEGACY_OPENJDK_TARGET_CPU1=i586,amd64,.... # used to set the old var ARCH
-# LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,.... # used to set the old var LIBARCH
-# LEGACY_OPENJDK_TARGET_CPU3=only sparcv9,amd64 # used to set the ISA_DIR on Solaris
-# There was also a BUILDARCH that had i486,amd64,... but we do not use that
-# in the new build.
-# LEGACY_OPENJDK_TARGET_OS_API=solaris,windows # used to select source roots
-
+# After basic tools have been setup, we can check build os specific details.
###############################################################################
@@ -6776,63 +7725,197 @@
-# With knowledge of the build platform, setup more basic things.
-
-# For cygwin we need cygpath first, since it is used everywhere.
-# Extract the first word of "cygpath", so it can be a program name with args.
-set dummy cygpath; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CYGPATH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGPATH=$ac_cv_path_CYGPATH
-if test -n "$CYGPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
-$as_echo "$CYGPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-PATH_SEP=":"
-if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- if test "x$CYGPATH" = x; then
- as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
- fi
- PATH_SEP=";"
-fi
-
-
-
-if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
- # Add extra search paths on solaris for utilities like ar and as etc...
- PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"
-fi
+# Setup builddeps, for automatic downloading of tools we need.
+# This is needed before we can call BDEPS_CHECK_MODULE, which is done in
+# boot-jdk setup, but we need to have basic tools setup first.
+
+
+# Check whether --with-builddeps-conf was given.
+if test "${with_builddeps_conf+set}" = set; then :
+ withval=$with_builddeps_conf;
+fi
+
+
+
+# Check whether --with-builddeps-server was given.
+if test "${with_builddeps_server+set}" = set; then :
+ withval=$with_builddeps_server;
+fi
+
+
+
+# Check whether --with-builddeps-dir was given.
+if test "${with_builddeps_dir+set}" = set; then :
+ withval=$with_builddeps_dir;
+else
+ with_builddeps_dir=/localhome/builddeps
+fi
+
+
+
+# Check whether --with-builddeps-group was given.
+if test "${with_builddeps_group+set}" = set; then :
+ withval=$with_builddeps_group;
+fi
+
+
+# Check whether --enable-list-builddeps was given.
+if test "${enable_list_builddeps+set}" = set; then :
+ enableval=$enable_list_builddeps; LIST_BUILDDEPS="${enableval}"
+else
+ LIST_BUILDDEPS='no'
+fi
+
+
+if test "x$LIST_BUILDDEPS" = xyes; then
+ echo
+ echo List of build dependencies known to the configure script,
+ echo that can be used in builddeps.conf files:
+ cat $AUTOCONF_DIR/*.ac $AUTOCONF_DIR/*.m4 | grep BDEPS_CHECK_MODULE\( | cut -f 2 -d ',' | tr -d ' ' | sort
+ echo
+ exit 1
+fi
+
+
+
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ if test "x$with_builddeps_conf" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for supplied builddeps configuration file" >&5
+$as_echo_n "checking for supplied builddeps configuration file... " >&6; }
+ builddepsfile=$with_builddeps_conf
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: loaded!" >&5
+$as_echo "loaded!" >&6; }
+ else
+ as_fn_error $? "The given builddeps conf file $with_builddeps_conf could not be loaded!" "$LINENO" 5
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builddeps.conf files in sources..." >&5
+$as_echo_n "checking for builddeps.conf files in sources...... " >&6; }
+ builddepsfile=`mktemp`
+ touch $builddepsfile
+ # Put all found confs into a single file.
+ find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
+ # Source the file to acquire the variables
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found at least one!" >&5
+$as_echo "found at least one!" >&6; }
+ else
+ as_fn_error $? "Could not find any builddeps.conf at all!" "$LINENO" 5
+ fi
+ fi
+ # Create build and target names that use _ instead of "-" and ".".
+ # This is necessary to use them in variable names.
+ build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ # Extract rewrite information for build and target
+ eval rewritten_build=\${REWRITE_${build_var}}
+ if test "x$rewritten_build" = x; then
+ rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
+ echo Build stays the same $rewritten_build
+ else
+ echo Rewriting build for builddeps into $rewritten_build
+ fi
+ eval rewritten_target=\${REWRITE_${target_var}}
+ if test "x$rewritten_target" = x; then
+ rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
+ echo Target stays the same $rewritten_target
+ else
+ echo Rewriting target for builddeps into $rewritten_target
+ fi
+ rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
+ rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
+ fi
+ for ac_prog in 7z unzip
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_BDEPS_UNZIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$BDEPS_UNZIP"; then
+ ac_cv_prog_BDEPS_UNZIP="$BDEPS_UNZIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_BDEPS_UNZIP="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+BDEPS_UNZIP=$ac_cv_prog_BDEPS_UNZIP
+if test -n "$BDEPS_UNZIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_UNZIP" >&5
+$as_echo "$BDEPS_UNZIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BDEPS_UNZIP" && break
+done
+
+ if test "x$BDEPS_UNZIP" = x7z; then
+ BDEPS_UNZIP="7z x"
+ fi
+
+ for ac_prog in wget lftp ftp
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_BDEPS_FTP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$BDEPS_FTP"; then
+ ac_cv_prog_BDEPS_FTP="$BDEPS_FTP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_BDEPS_FTP="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+BDEPS_FTP=$ac_cv_prog_BDEPS_FTP
+if test -n "$BDEPS_FTP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BDEPS_FTP" >&5
+$as_echo "$BDEPS_FTP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BDEPS_FTP" && break
+done
+
###############################################################################
@@ -6848,7 +7931,7 @@
# Check which variant of the JDK that we want to build.
# Currently we have:
# normal: standard edition
-# embedded: cut down to a smaller footprint
+# but the custom make system may add other variants
#
# Effectively the JDK variant gives a name to a specific set of
# modules to compile into the JDK. In the future, these modules
@@ -6864,18 +7947,10 @@
if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
- JAVASE_EMBEDDED=""
- MINIMIZE_RAM_USAGE=""
JDK_VARIANT="normal"
-elif test "x$with_jdk_variant" = xembedded; then
- JAVASE_EMBEDDED="JAVASE_EMBEDDED:=true"
- MINIMIZE_RAM_USAGE="MINIMIZE_RAM_USAGE:=true"
- JDK_VARIANT="embedded"
-else
- as_fn_error $? "The available JDK variants are: normal, embedded" "$LINENO" 5
-fi
-
-
+else
+ as_fn_error $? "The available JDK variants are: normal" "$LINENO" 5
+fi
@@ -6904,11 +7979,7 @@
if test "x$with_jvm_variants" = x; then
- if test "x$JDK_VARIANT" = xembedded; then
- with_jvm_variants="client"
- else
- with_jvm_variants="server"
- fi
+ with_jvm_variants="server"
fi
JVM_VARIANTS=",$with_jvm_variants,"
@@ -6953,6 +8024,11 @@
+if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ MACOSX_UNIVERSAL="true"
+fi
+
+
@@ -7058,6 +8134,14 @@
HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
+# On Macosx universal binaries are produced, but they only contain
+# 64 bit intel. This invalidates control of which jvms are built
+# from configure, but only server is valid anyway. Fix this
+# when hotspot makefiles are rewritten.
+if test "x$MACOSX_UNIVERSAL" = xtrue; then
+ HOTSPOT_TARGET=universal_product
+fi
+
#####
@@ -7133,14 +8217,12 @@
if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
- BUILD_HEADLESS_ONLY=""
headful_msg="inlude support for both headful and headless"
fi
if test "x$SUPPORT_HEADFUL" = xno; then
# Thus we are building headless only.
BUILD_HEADLESS="BUILD_HEADLESS:=true"
- BUILD_HEADLESS_ONLY="BUILD_HEADLESS_ONLY:=true"
headful_msg="headless only"
fi
@@ -7151,29 +8233,6 @@
-
-###############################################################################
-#
-# Should we run the painfully slow javadoc tool?
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build documentation" >&5
-$as_echo_n "checking whether to build documentation... " >&6; }
-# Check whether --enable-docs was given.
-if test "${enable_docs+set}" = set; then :
- enableval=$enable_docs; ENABLE_DOCS="${enableval}"
-else
- ENABLE_DOCS='no'
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_DOCS" >&5
-$as_echo "$ENABLE_DOCS" >&6; }
-
-GENERATE_DOCS=false
-if test "x$ENABLE_DOCS" = xyes; then
- GENERATE_DOCS=true
-fi
-
-
###############################################################################
#
# Should we compile nimbus swing L&F? We can probably remove this option
@@ -7238,25 +8297,21 @@
#
COMPRESS_JARS=false
-# default for embedded is yes...
-if test "x$JDK_VARIANT" = "xembedded"; then
- COMPRESS_JARS=true
-fi
###############################################################################
#
# Should we compile JFR
-# default no, except for on closed-jdk and !embedded
+# default no, except for on closed-jdk
#
ENABLE_JFR=no
# Is the JFR source present
#
-# For closed && !embedded default is yes if the source is present
-#
-if test "x${OPENJDK}" != "xtrue" && test "x$JDK_VARIANT" != "xembedded" && test -d "$SRC_ROOT/jdk/src/closed/share/native/oracle/jfr"; then
+# For closed default is yes
+#
+if test "x${OPENJDK}" != "xtrue"; then
ENABLE_JFR=yes
fi
@@ -7374,7 +8429,11 @@
HAS_SPACE=`echo "$OUTPUT_ROOT" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
OUTPUT_ROOT=`$CYGPATH -s -m -a "$OUTPUT_ROOT"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ OUTPUT_ROOT=`$ECHO "$OUTPUT_ROOT" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
OUTPUT_ROOT=`$CYGPATH -u "$OUTPUT_ROOT"`
else
as_fn_error $? "You cannot have spaces in the path to the output root! \"$OUTPUT_ROOT\"" "$LINENO" 5
@@ -7395,7 +8454,16 @@
# The spec.gmk file contains all variables for the make system.
ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in"
-# The spec.sh file contains variables for compare{images|-objects}.sh scrips.
+# The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
+ac_config_files="$ac_config_files $OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in"
+
+# The bootcycle-spec.gmk file contains support for boot cycle builds.
+ac_config_files="$ac_config_files $OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in"
+
+# The compare.sh is used to compare the build output to other builds.
+ac_config_files="$ac_config_files $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in"
+
+# Spec.sh is currently used by compare-objects.sh
ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in"
# The generated Makefile knows where the spec.gmk is and where the source is.
@@ -7423,41 +8491,129 @@
fi
+# We look for the Boot JDK through various means, going from more certain to
+# more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
+# we detected something (if so, the path to the jdk is in BOOT_JDK). But we
+# must check if this is indeed valid; otherwise we'll continue looking.
+
+# Test: Is bootjdk explicitely set by command line arguments?
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
if test "x$with_boot_jdk" != x; then
BOOT_JDK=$with_boot_jdk
- BOOT_JDK_FOUND=yes
-fi
-if test "x$BOOT_JDK_FOUND" = xno; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using configure arguments" >&5
+$as_echo "$as_me: Found potential Boot JDK using configure arguments" >&6;}
+fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
+ # Having specified an argument which is incorrect will produce an instant failure;
+ # we should not go on looking
+ as_fn_error $? "The path given by --with-boot-jdk does not contain a valid Boot JDK" "$LINENO" 5
+fi
+
+# Test: Is bootjdk available from builddeps?
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
# Source the builddeps file again, to make sure it uses the latest variables!
. $builddepsfile
# Look for a target and build machine specific resource!
- eval resource=\${builddep_boot-jdk_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
if test "x$resource" = x; then
# Ok, lets instead look for a target specific resource
- eval resource=\${builddep_boot-jdk_TARGET_${rewritten_target_var}}
+ eval resource=\${builddep_bootjdk_TARGET_${rewritten_target_var}}
fi
if test "x$resource" = x; then
# Ok, lets instead look for a build specific resource
- eval resource=\${builddep_boot-jdk_BUILD_${rewritten_build_var}}
+ eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}}
fi
if test "x$resource" = x; then
# Ok, lets instead look for a generic resource
- # (The boot-jdk comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_boot-jdk}
+ # (The bootjdk comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_bootjdk}
fi
if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for boot-jdk" >&5
-$as_echo "$as_me: Using builddeps $resource for boot-jdk" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for bootjdk" >&5
+$as_echo "$as_me: Using builddeps $resource for bootjdk" >&6;}
# If the resource in the builddeps.conf file is an existing directory,
# for example /java/linux/cups
if test -d ${resource}; then
depdir=${resource}
else
-# boot-jdk is for example mymodule
+# bootjdk is for example mymodule
# $resource is for example libs/general/libmymod_1_2_3.zip
# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
# $with_builddeps_dir is for example /localhome/builddeps
@@ -7470,15 +8626,15 @@
extension=${filename#*.}
installdir=$with_builddeps_dir/$filebase
if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency boot-jdk from $with_builddeps_server/$resource and installing into $installdir" >&5
-$as_echo "$as_me: Downloading build dependency boot-jdk from $with_builddeps_server/$resource and installing into $installdir" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency bootjdk from $with_builddeps_server/$resource and installing into $installdir" >&5
+$as_echo "$as_me: Downloading build dependency bootjdk from $with_builddeps_server/$resource and installing into $installdir" >&6;}
if test ! -d $installdir; then
mkdir -p $installdir
fi
if test ! -d $installdir; then
as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
fi
- tmpfile=`mktemp $installdir/boot-jdk.XXXXXXXXX`
+ tmpfile=`mktemp $installdir/bootjdk.XXXXXXXXX`
touch $tmpfile
if test ! -f $tmpfile; then
as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
@@ -7549,11 +8705,11 @@
# was updated to point at the current build dependency install directory.
. $builddepsfile
# Now extract variables from the builddeps.conf files.
- theroot=${builddep_boot-jdk_ROOT}
- thecflags=${builddep_boot-jdk_CFLAGS}
- thelibs=${builddep_boot-jdk_LIBS}
+ theroot=${builddep_bootjdk_ROOT}
+ thecflags=${builddep_bootjdk_CFLAGS}
+ thelibs=${builddep_bootjdk_LIBS}
if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency boot-jdk" "$LINENO" 5
+ as_fn_error $? "Could not download build dependency bootjdk" "$LINENO" 5
fi
BOOT_JDK=$depdir
if test "x$theroot" != x; then
@@ -7565,7 +8721,7 @@
if test "x$thelibs" != x; then
BOOT_JDK_LIBS="$thelibs"
fi
- BOOT_JDK_FOUND=yes
+ BOOT_JDK_FOUND=maybe
else BOOT_JDK_FOUND=no
fi
@@ -7573,41 +8729,247 @@
fi
-fi
-
-if test "x$BOOT_JDK_FOUND" = xno; then
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+# Test: Is $JAVA_HOME set?
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
if test "x$JAVA_HOME" != x; then
- if test ! -d "$JAVA_HOME"; then
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ # On Windows, JAVA_HOME is likely in DOS-style
+ JAVA_HOME_PROCESSED="`$CYGPATH -u "$JAVA_HOME"`"
+ else
+ JAVA_HOME_PROCESSED="$JAVA_HOME"
+ fi
+ if test ! -d "$JAVA_HOME_PROCESSED"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: Your JAVA_HOME points to a non-existing directory!" >&5
$as_echo "$as_me: Your JAVA_HOME points to a non-existing directory!" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
- fi
- # Aha, the user has set a JAVA_HOME
- # let us use that as the Boot JDK.
- BOOT_JDK="$JAVA_HOME"
- BOOT_JDK_FOUND=yes
- # To be on the safe side, lets check that it is a JDK.
- if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
- JAVAC="$BOOT_JDK/bin/javac"
- JAVA="$BOOT_JDK/bin/java"
- BOOT_JDK_FOUND=yes
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your JAVA_HOME points to a JRE! The build needs a JDK! Please point JAVA_HOME to a JDK. JAVA_HOME=$JAVA_HOME" >&5
-$as_echo "$as_me: Your JAVA_HOME points to a JRE! The build needs a JDK! Please point JAVA_HOME to a JDK. JAVA_HOME=$JAVA_HOME" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
- fi
- fi
-fi
-
-if test "x$BOOT_JDK_FOUND" = xno; then
+ else
+ # Aha, the user has set a JAVA_HOME
+ # let us use that as the Boot JDK.
+ BOOT_JDK="$JAVA_HOME_PROCESSED"
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using JAVA_HOME" >&5
+$as_echo "$as_me: Found potential Boot JDK using JAVA_HOME" >&6;}
+ fi
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test -x /usr/libexec/java_home; then
+ BOOT_JDK=`/usr/libexec/java_home`
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using /usr/libexec/java_home" >&5
+$as_echo "$as_me: Found potential Boot JDK using /usr/libexec/java_home" >&6;}
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
# Extract the first word of "javac", so it can be a program name with args.
set dummy javac; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -7800,116 +9162,742 @@
fi
fi
- BOOT_JDK=`dirname $BINARY`
- BOOT_JDK=`cd $BOOT_JDK/..; pwd`
- if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then
- JAVAC=$BOOT_JDK/bin/javac
- JAVA=$BOOT_JDK/bin/java
- BOOT_JDK_FOUND=yes
- fi
- fi
-fi
-
-if test "x$BOOT_JDK_FOUND" = xno; then
- # Try the MacOSX way.
- if test -x /usr/libexec/java_home; then
- BOOT_JDK=`/usr/libexec/java_home`
- if test -x $BOOT_JDK/bin/javac && test -x $BOOT_JDK/bin/java; then
- JAVAC=$BOOT_JDK/bin/javac
- JAVA=$BOOT_JDK/bin/java
- BOOT_JDK_FOUND=yes
- fi
- fi
-fi
-
+ BOOT_JDK=`dirname "$BINARY"`
+ BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
+ if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
+ # Looks like we found ourselves an JDK
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using java(c) in PATH" >&5
+$as_echo "$as_me: Found potential Boot JDK using java(c) in PATH" >&6;}
+ fi
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+# Test: Is there a JDK installed in default, well-known locations?
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test "x$ProgramW6432" != x; then
+
+ BOOT_JDK_PREFIX="`$CYGPATH -u "$ProgramW6432"`/Java"
+ BOOT_JDK_SUFFIX=""
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test "x$PROGRAMW6432" != x; then
+
+ BOOT_JDK_PREFIX="`$CYGPATH -u "$PROGRAMW6432"`/Java"
+ BOOT_JDK_SUFFIX=""
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test "x$PROGRAMFILES" != x; then
+
+ BOOT_JDK_PREFIX="`$CYGPATH -u "$PROGRAMFILES"`/Java"
+ BOOT_JDK_SUFFIX=""
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ if test "x$ProgramFiles" != x; then
+
+ BOOT_JDK_PREFIX="`$CYGPATH -u "$ProgramFiles"`/Java"
+ BOOT_JDK_SUFFIX=""
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ BOOT_JDK_PREFIX="/cygdrive/c/Program Files/Java"
+ BOOT_JDK_SUFFIX=""
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+ elif test "x$OPENJDK_TARGET_OS" = xmacosx; then
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ BOOT_JDK_PREFIX="/Library/Java/JavaVirtualMachines"
+ BOOT_JDK_SUFFIX="/Contents/Home"
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ # Now execute the test
+
+ BOOT_JDK_PREFIX="/System/Library/Java/JavaVirtualMachines"
+ BOOT_JDK_SUFFIX="/Contents/Home"
+ BEST_JDK_FOUND=`$LS "$BOOT_JDK_PREFIX" 2> /dev/null | $GREP jdk | $SORT -r | $HEAD -n 1 `
+ if test "x$BEST_JDK_FOUND" != x; then
+ BOOT_JDK="${BOOT_JDK_PREFIX}/${BEST_JDK_FOUND}${BOOT_JDK_SUFFIX}"
+ if test -d "$BOOT_JDK"; then
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&5
+$as_echo "$as_me: Found potential Boot JDK using well-known locations (in $BOOT_JDK_PREFIX)" >&6;}
+ fi
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+ fi
+
+
+ # If previous step claimed to have found a JDK, check it to see if it seems to be valid.
+ if test "x$BOOT_JDK_FOUND" = xmaybe; then
+ # Do we have a bin/java?
+ if test ! -x "$BOOT_JDK/bin/java"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/java; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have a bin/javac?
+ if test ! -x "$BOOT_JDK/bin/javac"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (This might be an JRE instead of an JDK)" >&5
+$as_echo "$as_me: (This might be an JRE instead of an JDK)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Do we have an rt.jar? (On MacOSX it is called classes.jar)
+ if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # Oh, this is looking good! We probably have found a proper JDK. Is it the correct version?
+ BOOT_JDK_VERSION=`"$BOOT_JDK/bin/java" -version 2>&1 | head -n 1`
+
+ # Extra M4 quote needed to protect [] in grep expression.
+ FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
+ if test "x$FOUND_VERSION_78" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&5
+$as_echo "$as_me: Potential Boot JDK found at $BOOT_JDK is incorrect JDK version ($BOOT_JDK_VERSION); ignoring" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: (Your Boot JDK must be version 7 or 8)" >&5
+$as_echo "$as_me: (Your Boot JDK must be version 7 or 8)" >&6;}
+ BOOT_JDK_FOUND=no
+ else
+ # We're done! :-)
+ BOOT_JDK_FOUND=yes
+
+ # Fail with message the path to the Boot JDK if var BOOT_JDK contains a path with no spaces in it.
+ # Unless on Windows, where we can rewrite the path.
+ HAS_SPACE=`echo "$BOOT_JDK" | grep " "`
+ if test "x$HAS_SPACE" != x; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
+ BOOT_JDK=`$CYGPATH -s -m -a "$BOOT_JDK"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ BOOT_JDK=`$ECHO "$BOOT_JDK" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
+ BOOT_JDK=`$CYGPATH -u "$BOOT_JDK"`
+ else
+ as_fn_error $? "You cannot have spaces in the path to the Boot JDK! \"$BOOT_JDK\"" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
+$as_echo_n "checking for Boot JDK... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK ($BOOT_JDK_VERSION)" >&5
+$as_echo "$BOOT_JDK ($BOOT_JDK_VERSION)" >&6; }
+ fi # end check jdk version
+ fi # end check rt.jar
+ fi # end check javac
+ fi # end check java
+ fi # end check boot jdk found
+ fi
+
+
+# If we haven't found anything yet, we've truly lost. Give up.
if test "x$BOOT_JDK_FOUND" = xno; then
- # Extract the first word of "java", so it can be a program name with args.
-set dummy java; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_JAVA_CHECK+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $JAVA_CHECK in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_JAVA_CHECK="$JAVA_CHECK" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_JAVA_CHECK="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-JAVA_CHECK=$ac_cv_path_JAVA_CHECK
-if test -n "$JAVA_CHECK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JAVA_CHECK" >&5
-$as_echo "$JAVA_CHECK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- if test "x$JAVA_CHECK" != x; then
- # There is a java in the path. But apparently we have not found a javac
- # in the path, since that would have been tested earlier.
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # Now if this is a windows platform. The default installation of a JDK
- # actually puts the JRE in the path and keeps the JDK out of the path!
- # Go look in the default installation location.
- BOOT_JDK=/cygdrive/c/Program\ Files/Java/`ls /cygdrive/c/Program\ Files/Java | grep jdk | sort -r | head --lines 1`
- if test -d "$BOOT_JDK"; then
- BOOT_JDK_FOUND=yes
- fi
- fi
- if test "x$BOOT_JDK_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # openjdk is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=openjdk
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- * )
- break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found a JRE, not not a JDK! Please remove the JRE from your path and put a JDK there instead. $HELP_MSG" >&5
-$as_echo "$as_me: Found a JRE, not not a JDK! Please remove the JRE from your path and put a JDK there instead. $HELP_MSG" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
- fi
- else
# Print a helpful message on how to acquire the necessary build dependency.
# openjdk is the help tag: freetyp2, cups, pulse, alsa etc
@@ -7935,270 +9923,135 @@
HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a JDK. $HELP_MSG" >&5
-$as_echo "$as_me: Could not find a JDK. $HELP_MSG" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a valid Boot JDK. $HELP_MSG" >&5
+$as_echo "$as_me: Could not find a valid Boot JDK. $HELP_MSG" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
- fi
-fi
-
-
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- # Extract the first word of "cygpath", so it can be a program name with args.
-set dummy cygpath; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_CYGPATH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $CYGPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_CYGPATH="$CYGPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_CYGPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-CYGPATH=$ac_cv_path_CYGPATH
-if test -n "$CYGPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGPATH" >&5
-$as_echo "$CYGPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- tmp="$BOOT_JDK"
- # Convert to C:/ mixed style path without spaces.
- tmp=`$CYGPATH -s -m "$tmp"`
- BOOT_JDK="$tmp"
- fi
-
-
-# Now see if we can find the rt.jar, or its nearest equivalent.
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+fi
+
+# Setup proper paths for what we found
BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
-
- # Fail with message the path to the Boot JDK rt.jar (or nearest equivalent) if var BOOT_RTJAR contains a path with no spaces in it.
- # Unless on Windows, where we can rewrite the path.
- HAS_SPACE=`echo "$BOOT_RTJAR" | grep " "`
- if test "x$HAS_SPACE" != x; then
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- BOOT_RTJAR=`$CYGPATH -s -m -a "$BOOT_RTJAR"`
- BOOT_RTJAR=`$CYGPATH -u "$BOOT_RTJAR"`
- else
- as_fn_error $? "You cannot have spaces in the path to the Boot JDK rt.jar (or nearest equivalent)! \"$BOOT_RTJAR\"" "$LINENO" 5
- fi
- fi
-
-
+if test ! -f "$BOOT_RTJAR"; then
+ # On MacOSX it is called classes.jar
+ BOOT_RTJAR="$BOOT_JDK/../Classes/classes.jar"
+ if test -f "$BOOT_RTJAR"; then
+ # Remove the ..
+ BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
+ fi
+fi
BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
-
- # Fail with message the path to the Boot JDK tools.jar (or nearest equivalent) if var BOOT_TOOLSJAR contains a path with no spaces in it.
- # Unless on Windows, where we can rewrite the path.
- HAS_SPACE=`echo "$BOOT_TOOLSJAR" | grep " "`
- if test "x$HAS_SPACE" != x; then
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- BOOT_TOOLSJAR=`$CYGPATH -s -m -a "$BOOT_TOOLSJAR"`
- BOOT_TOOLSJAR=`$CYGPATH -u "$BOOT_TOOLSJAR"`
- else
- as_fn_error $? "You cannot have spaces in the path to the Boot JDK tools.jar (or nearest equivalent)! \"$BOOT_TOOLSJAR\"" "$LINENO" 5
- fi
- fi
-
-
-if test ! -f $BOOT_RTJAR; then
- # On MacOSX it is called classes.jar
- BOOT_RTJAR=$BOOT_JDK/../Classes/classes.jar
- if test ! -f $BOOT_RTJAR; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Cannot find the rt.jar or its equivalent!" >&5
-$as_echo "$as_me: Cannot find the rt.jar or its equivalent!" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: This typically means that configure failed to automatically find a suitable Boot JDK" >&5
-$as_echo "$as_me: This typically means that configure failed to automatically find a suitable Boot JDK" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
- fi
- # Remove the ..
- BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
- # The tools.jar is part of classes.jar
- BOOT_TOOLSJAR="$BOOT_RTJAR"
-fi
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot JDK" >&5
-$as_echo_n "checking for Boot JDK... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_JDK" >&5
-$as_echo "$BOOT_JDK" >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot rt.jar" >&5
-$as_echo_n "checking for Boot rt.jar... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_RTJAR" >&5
-$as_echo "$BOOT_RTJAR" >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Boot tools.jar" >&5
-$as_echo_n "checking for Boot tools.jar... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $BOOT_TOOLSJAR" >&5
-$as_echo "$BOOT_TOOLSJAR" >&6; }
-
-# Use the java tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for java in Boot JDK" >&5
+BOOT_JDK="$BOOT_JDK"
+
+
+
+
+# Setup tools from the Boot JDK.
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for java in Boot JDK" >&5
$as_echo_n "checking for java in Boot JDK... " >&6; }
-JAVA=$BOOT_JDK/bin/java
-if test ! -x $JAVA; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a working java" >&5
-$as_echo "$as_me: Could not find a working java" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
-BOOT_JDK_VERSION=`$JAVA -version 2>&1 | head -n 1`
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes $BOOT_JDK_VERSION" >&5
-$as_echo "yes $BOOT_JDK_VERSION" >&6; }
-
-
-# Extra M4 quote needed to protect [] in grep expression.
-FOUND_VERSION_78=`echo $BOOT_JDK_VERSION | grep '\"1\.[78]\.'`
-if test "x$FOUND_VERSION_78" = x; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # openjdk is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=openjdk
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
- yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
- * )
- break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your boot-jdk must be version 7 or 8. $HELP_MSG" >&5
-$as_echo "$as_me: Your boot-jdk must be version 7 or 8. $HELP_MSG" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
+ JAVA=$BOOT_JDK/bin/java
+ if test ! -x $JAVA; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find java in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for javac in Boot JDK" >&5
+$as_echo_n "checking for javac in Boot JDK... " >&6; }
+ JAVAC=$BOOT_JDK/bin/javac
+ if test ! -x $JAVAC; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find javac in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for javah in Boot JDK" >&5
+$as_echo_n "checking for javah in Boot JDK... " >&6; }
+ JAVAH=$BOOT_JDK/bin/javah
+ if test ! -x $JAVAH; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find javah in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for javap in Boot JDK" >&5
+$as_echo_n "checking for javap in Boot JDK... " >&6; }
+ JAVAP=$BOOT_JDK/bin/javap
+ if test ! -x $JAVAP; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find javap in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for jar in Boot JDK" >&5
+$as_echo_n "checking for jar in Boot JDK... " >&6; }
+ JAR=$BOOT_JDK/bin/jar
+ if test ! -x $JAR; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find jar in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for rmic in Boot JDK" >&5
+$as_echo_n "checking for rmic in Boot JDK... " >&6; }
+ RMIC=$BOOT_JDK/bin/rmic
+ if test ! -x $RMIC; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find rmic in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for native2ascii in Boot JDK" >&5
+$as_echo_n "checking for native2ascii in Boot JDK... " >&6; }
+ NATIVE2ASCII=$BOOT_JDK/bin/native2ascii
+ if test ! -x $NATIVE2ASCII; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+$as_echo "not found" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
+ as_fn_error $? "Could not find native2ascii in the Boot JDK" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+
+
+# Finally, set some other options...
# When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
BOOT_JDK_SOURCETARGET="-source 7 -target 7"
-# Use the javac tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for javac in Boot JDK" >&5
-$as_echo_n "checking for javac in Boot JDK... " >&6; }
-JAVAC=$BOOT_JDK/bin/javac
-if test ! -x $JAVAC; then
- as_fn_error $? "Could not find a working javac" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-
-
-# Use the javah tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for javah in Boot JDK" >&5
-$as_echo_n "checking for javah in Boot JDK... " >&6; }
-JAVAH=$BOOT_JDK/bin/javah
-if test ! -x $JAVAH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a working javah" >&5
-$as_echo "$as_me: Could not find a working javah" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-
-# Use the jar tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for jar in Boot JDK" >&5
-$as_echo_n "checking for jar in Boot JDK... " >&6; }
-JAR=$BOOT_JDK/bin/jar
-if test ! -x $JAR; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a working jar" >&5
-$as_echo "$as_me: Could not find a working jar" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-# Use the rmic tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for rmic in Boot JDK" >&5
-$as_echo_n "checking for rmic in Boot JDK... " >&6; }
-RMIC=$BOOT_JDK/bin/rmic
-if test ! -x $RMIC; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a working rmic" >&5
-$as_echo "$as_me: Could not find a working rmic" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-# Use the native2ascii tool from the Boot JDK.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for native2ascii in Boot JDK" >&5
-$as_echo_n "checking for native2ascii in Boot JDK... " >&6; }
-NATIVE2ASCII=$BOOT_JDK/bin/native2ascii
-if test ! -x $NATIVE2ASCII; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a working native2ascii" >&5
-$as_echo "$as_me: Could not find a working native2ascii" >&6;}
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
-$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
##############################################################################
@@ -8573,33 +10426,10 @@
-LANGTOOLS_OUTPUTDIR="$OUTPUT_ROOT/langtools"
-CORBA_OUTPUTDIR="$OUTPUT_ROOT/corba"
-JAXP_OUTPUTDIR="$OUTPUT_ROOT/jaxp"
-JAXWS_OUTPUTDIR="$OUTPUT_ROOT/jaxws"
-HOTSPOT_OUTPUTDIR="$OUTPUT_ROOT/hotspot"
+BUILD_OUTPUT="$OUTPUT_ROOT"
+
+
JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
-IMAGES_OUTPUTDIR="$OUTPUT_ROOT/images"
-
-
-
-
-
-
-
-
-
-LANGTOOLS_DIST="$OUTPUT_ROOT/langtools/dist"
-CORBA_DIST="$OUTPUT_ROOT/corba/dist"
-JAXP_DIST="$OUTPUT_ROOT/jaxp/dist"
-JAXWS_DIST="$OUTPUT_ROOT/jaxws/dist"
-HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
-
-
-
-
-
-
###############################################################################
@@ -8620,9 +10450,6 @@
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-DEVKIT=
-SYS_ROOT=/
-
# The option used to specify the target .o,.a or .so file.
# When compiling, how to specify the to be created object file.
@@ -8645,6 +10472,61 @@
# the set env variables into the spec file.
SETUPDEVENV="# No special vars"
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # Store path to cygwin link.exe to help excluding it when searching for
+ # VS linker.
+ # Extract the first word of "link", so it can be a program name with args.
+set dummy link; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_CYGWIN_LINK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $CYGWIN_LINK in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_CYGWIN_LINK="$CYGWIN_LINK" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_CYGWIN_LINK="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+CYGWIN_LINK=$ac_cv_path_CYGWIN_LINK
+if test -n "$CYGWIN_LINK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CYGWIN_LINK" >&5
+$as_echo "$CYGWIN_LINK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the first found link.exe is actually the Cygwin link tool" >&5
+$as_echo_n "checking if the first found link.exe is actually the Cygwin link tool... " >&6; }
+ "$CYGWIN_LINK" --version > /dev/null
+ if test $? -eq 0 ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ # This might be the VS linker. Don't exclude it later on.
+ CYGWIN_LINK=""
+ fi
+
# If vcvarsall.bat has been run, then VCINSTALLDIR is set.
if test "x$VCINSTALLDIR" != x; then
# No further setup is needed. The build will happen from this kind
@@ -8675,12 +10557,12 @@
$as_echo "no" >&6; }
as_fn_error $? "Tried to find a VS installation using both $SEARCH_ROOT but failed. Please run \"c:\\cygwin\\bin\\bash.exe -l\" from a VS command prompt and then run configure/make from there." "$LINENO" 5
fi
- case "$LEGACY_OPENJDK_TARGET_CPU1" in
- i?86)
+ case "$OPENJDK_TARGET_CPU" in
+ x86)
VARSBAT_ARCH=x86
;;
- *)
- VARSBAT_ARCH=$LEGACY_OPENJDK_TARGET_CPU1
+ x86_64)
+ VARSBAT_ARCH=amd64
;;
esac
# Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
@@ -8743,7 +10625,11 @@
HAS_SPACE=`echo "$MSVCR100DLL" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
MSVCR100DLL=`$CYGPATH -s -m -a "$MSVCR100DLL"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ MSVCR100DLL=`$ECHO "$MSVCR100DLL" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
MSVCR100DLL=`$CYGPATH -u "$MSVCR100DLL"`
else
as_fn_error $? "You cannot have spaces in the path to msvcr100.dll! \"$MSVCR100DLL\"" "$LINENO" 5
@@ -8768,64 +10654,56 @@
# Setting only --host, does not seem to be really supported.
# Please set both --build and --host if you want to cross compile.
-DEFINE_CROSS_COMPILE_ARCH=""
-HOSTCC=""
-HOSTCXX=""
-HOSTLD=""
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if this is a cross compile" >&5
-$as_echo_n "checking if this is a cross compile... " >&6; }
-if test "x$OPENJDK_BUILD_SYSTEM" != "x$OPENJDK_TARGET_SYSTEM"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, from $OPENJDK_BUILD_SYSTEM to $OPENJDK_TARGET_SYSTEM" >&5
-$as_echo "yes, from $OPENJDK_BUILD_SYSTEM to $OPENJDK_TARGET_SYSTEM" >&6; }
- # We have detected a cross compile!
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$LEGACY_OPENJDK_TARGET_CPU1"
+if test "x$COMPILE_TYPE" = "xcross"; then
# Now we to find a C/C++ compiler that can build executables for the build
# platform. We can't use the AC_PROG_CC macro, since it can only be used
- # once.
+ # once. Also, we need to do this before adding a tools dir to the path,
+ # otherwise we might pick up cross-compilers which don't use standard naming.
+ # Otherwise, we'll set the BUILD_tools to the native tools, but that'll have
+ # to wait until they are properly discovered.
for ac_prog in cl cc gcc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_HOSTCC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $HOSTCC in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HOSTCC="$HOSTCC" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_HOSTCC="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HOSTCC=$ac_cv_path_HOSTCC
-if test -n "$HOSTCC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HOSTCC" >&5
-$as_echo "$HOSTCC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HOSTCC" && break
+if test "${ac_cv_path_BUILD_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_CC in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_CC="$BUILD_CC" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_BUILD_CC="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_CC=$ac_cv_path_BUILD_CC
+if test -n "$BUILD_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CC" >&5
+$as_echo "$BUILD_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_CC" && break
done
@@ -8833,9 +10711,9 @@
# extract the full path to the binary and at the
# same time maintain any arguments passed to it.
# The command MUST exist in the path, or else!
- tmp="$HOSTCC"
+ tmp="$BUILD_CC"
car="${tmp%% *}"
- tmp="$HOSTCC EOL"
+ tmp="$BUILD_CC EOL"
cdr="${tmp#* }"
# On windows we want paths without spaces.
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
@@ -8866,9 +10744,9 @@
car=`which $car`
fi
if test "x$cdr" != xEOL; then
- HOSTCC="$car ${cdr% *}"
- else
- HOSTCC="$car"
+ BUILD_CC="$car ${cdr% *}"
+ else
+ BUILD_CC="$car"
fi
for ac_prog in cl CC g++
@@ -8877,43 +10755,43 @@
set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_HOSTCXX+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $HOSTCXX in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HOSTCXX="$HOSTCXX" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_HOSTCXX="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HOSTCXX=$ac_cv_path_HOSTCXX
-if test -n "$HOSTCXX"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HOSTCXX" >&5
-$as_echo "$HOSTCXX" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$HOSTCXX" && break
+if test "${ac_cv_path_BUILD_CXX+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_CXX in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_CXX="$BUILD_CXX" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_BUILD_CXX="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_CXX=$ac_cv_path_BUILD_CXX
+if test -n "$BUILD_CXX"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_CXX" >&5
+$as_echo "$BUILD_CXX" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$BUILD_CXX" && break
done
@@ -8921,9 +10799,9 @@
# extract the full path to the binary and at the
# same time maintain any arguments passed to it.
# The command MUST exist in the path, or else!
- tmp="$HOSTCXX"
+ tmp="$BUILD_CXX"
car="${tmp%% *}"
- tmp="$HOSTCXX EOL"
+ tmp="$BUILD_CXX EOL"
cdr="${tmp#* }"
# On windows we want paths without spaces.
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
@@ -8954,45 +10832,45 @@
car=`which $car`
fi
if test "x$cdr" != xEOL; then
- HOSTCXX="$car ${cdr% *}"
- else
- HOSTCXX="$car"
+ BUILD_CXX="$car ${cdr% *}"
+ else
+ BUILD_CXX="$car"
fi
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_HOSTLD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $HOSTLD in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_HOSTLD="$HOSTLD" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_HOSTLD="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-HOSTLD=$ac_cv_path_HOSTLD
-if test -n "$HOSTLD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HOSTLD" >&5
-$as_echo "$HOSTLD" >&6; }
+if test "${ac_cv_path_BUILD_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $BUILD_LD in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_BUILD_LD="$BUILD_LD" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_BUILD_LD="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+BUILD_LD=$ac_cv_path_BUILD_LD
+if test -n "$BUILD_LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $BUILD_LD" >&5
+$as_echo "$BUILD_LD" >&6; }
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
@@ -9004,9 +10882,9 @@
# extract the full path to the binary and at the
# same time maintain any arguments passed to it.
# The command MUST exist in the path, or else!
- tmp="$HOSTLD"
+ tmp="$BUILD_LD"
car="${tmp%% *}"
- tmp="$HOSTLD EOL"
+ tmp="$BUILD_LD EOL"
cdr="${tmp#* }"
# On windows we want paths without spaces.
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
@@ -9037,34 +10915,20 @@
car=`which $car`
fi
if test "x$cdr" != xEOL; then
- HOSTLD="$car ${cdr% *}"
- else
- HOSTLD="$car"
- fi
-
- # Building for the build platform should be easy. Therefore
- # we do not need any linkers or assemblers etc.
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-# You can force the sys-root if the sys-root encoded into the cross compiler tools
-# is not correct.
-
-# Check whether --with-sys-root was given.
-if test "${with_sys_root+set}" = set; then :
- withval=$with_sys_root;
-fi
-
-
-if test "x$with_sys_root" != x; then
- SYS_ROOT=$with_sys_root
-fi
+ BUILD_LD="$car ${cdr% *}"
+ else
+ BUILD_LD="$car"
+ fi
+
+fi
+
+
+
# If a devkit is found on the builddeps server, then prepend its path to the
# PATH variable. If there are cross compilers available in the devkit, these
# will be found by AC_PROG_CC et al.
+DEVKIT=
if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
@@ -9232,29 +11096,6 @@
ORG_CXXFLAGS="$CXXFLAGS"
ORG_OBJCFLAGS="$OBJCFLAGS"
-
-# Check whether --with-tools-dir was given.
-if test "${with_tools_dir+set}" = set; then :
- withval=$with_tools_dir; TOOLS_DIR=$with_tools_dir
-fi
-
-
-
-# Check whether --with-devkit was given.
-if test "${with_devkit+set}" = set; then :
- withval=$with_devkit;
- if test "x$with_sys_root" != x; then
- as_fn_error $? "Cannot specify both --with-devkit and --with-sys-root at the same time" "$LINENO" 5
- fi
- if test "x$with_tools_dir" != x; then
- as_fn_error $? "Cannot specify both --with-devkit and --with-tools-dir at the same time" "$LINENO" 5
- fi
- TOOLS_DIR=$with_devkit/bin
- SYS_ROOT=$with_devkit/$host_alias/libc
-
-fi
-
-
# autoconf magic only relies on PATH, so update it if tools dir is specified
OLD_PATH="$PATH"
if test "x$TOOLS_DIR" != x; then
@@ -10578,152 +12419,11 @@
CXXFLAGS="$ORG_CXXFLAGS"
OBJCFLAGS="$ORG_OBJCFLAGS"
-# If we are not cross compiling, use the same compilers for
-# building the build platform executables.
-if test "x$DEFINE_CROSS_COMPILE_ARCH" = x; then
- HOSTCC="$CC"
- HOSTCXX="$CXX"
-fi
-
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}ld", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_LD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$LD"; then
- ac_cv_prog_LD="$LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_LD="${ac_tool_prefix}ld"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-LD=$ac_cv_prog_LD
-if test -n "$LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_LD"; then
- ac_ct_LD=$LD
- # Extract the first word of "ld", so it can be a program name with args.
-set dummy ld; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_LD+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_LD"; then
- ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_LD="ld"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_LD=$ac_cv_prog_ac_ct_LD
-if test -n "$ac_ct_LD"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LD" >&5
-$as_echo "$ac_ct_LD" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_LD" = x; then
- LD=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- LD=$ac_ct_LD
- fi
-else
- LD="$ac_cv_prog_LD"
-fi
-
-
- # Translate "gcc -E" into "`which gcc` -E" ie
- # extract the full path to the binary and at the
- # same time maintain any arguments passed to it.
- # The command MUST exist in the path, or else!
- tmp="$LD"
- car="${tmp%% *}"
- tmp="$LD EOL"
- cdr="${tmp#* }"
- # On windows we want paths without spaces.
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
-
- # Translate long cygdrive or C:\sdfsf path
- # into a short mixed mode path that has no
- # spaces in it.
- tmp="$car"
-
- if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- tmp=`$CYGPATH -u "$car"`
- tmp=`which "$tmp"`
- # If file exists with .exe appended, that's the real filename
- # and cygpath needs that to convert to short style path.
- if test -f "${tmp}.exe"; then
- tmp="${tmp}.exe"
- elif test -f "${tmp}.cmd"; then
- tmp="${tmp}.cmd"
- fi
- # Convert to C:/ mixed style path without spaces.
- tmp=`$CYGPATH -s -m "$tmp"`
- fi
- car="$tmp"
-
- else
- # "which" is not portable, but is used here
- # because we know that the command exists!
- car=`which $car`
- fi
- if test "x$cdr" != xEOL; then
- LD="$car ${cdr% *}"
- else
- LD="$car"
- fi
-
LD="$CC"
LDEXE="$CC"
LDCXX="$CXX"
LDEXECXX="$CXX"
+
# LDEXE is the linker to use, when creating executables.
# Linking C++ libraries.
@@ -10731,7 +12431,8 @@
# Linking C++ executables.
-if test -n "$ac_tool_prefix"; then
+if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -10866,6 +12567,7 @@
AR="$car"
fi
+fi
if test "x$OPENJDK_BUILD_OS" = xmacosx; then
ARFLAGS="-r"
else
@@ -10882,7 +12584,7 @@
EXE_OUT_OPTION=-out:
LD_OUT_OPTION=-out:
AR_OUT_OPTION=-out:
- # On Windows, reject /usr/bin/link, which is a cygwin
+ # On Windows, reject /usr/bin/link (as determined in CYGWIN_LINK), which is a cygwin
# program for something completely different.
# Extract the first word of "link", so it can be a program name with args.
set dummy link; ac_word=$2
@@ -10902,7 +12604,7 @@
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/bin/link"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "$CYGWIN_LINK"; then
ac_prog_rejected=yes
continue
fi
@@ -10961,13 +12663,22 @@
fi
WINLD="$tmp"
+ printf "Windows linker was found at $WINLD\n"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the found link.exe is actually the Visual Studio linker" >&5
+$as_echo_n "checking if the found link.exe is actually the Visual Studio linker... " >&6; }
+ "$WINLD" --version > /dev/null
+ if test $? -eq 0 ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ as_fn_error $? "This is the Cygwin link tool. Please check your PATH and rerun configure." "$LINENO" 5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ fi
LD="$WINLD"
LDEXE="$WINLD"
LDCXX="$WINLD"
LDEXECXX="$WINLD"
- # Set HOSTLD to same as LD until we fully support cross compilation
- # on windows.
- HOSTLD="$WINLD"
# Extract the first word of "mt", so it can be a program name with args.
set dummy mt; ac_word=$2
@@ -11627,6 +13338,16 @@
fi
+if test "x$COMPILE_TYPE" != "xcross"; then
+ # If we are not cross compiling, use the same compilers for
+ # building the build platform executables. The cross-compilation
+ # case needed to be done earlier, but this can only be done after
+ # the native tools have been localized.
+ BUILD_CC="$CC"
+ BUILD_CXX="$CXX"
+ BUILD_LD="$LD"
+fi
+
# for solaris we really need solaris tools, and not gnu equivalent
# these seems to normally reside in /usr/ccs/bin so add that to path before
# starting to probe
@@ -11722,17 +13443,16 @@
AS="$car"
fi
- ASFLAGS=" "
else
AS="$CC -c"
- ASFLAGS=" "
-fi
-
+fi
if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- # Extract the first word of "nm", so it can be a program name with args.
-set dummy nm; ac_word=$2
+ for ac_prog in gnm nm
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
if test "${ac_cv_path_NM+set}" = set; then :
@@ -11771,6 +13491,9 @@
fi
+ test -n "$NM" && break
+done
+
# Translate "gcc -E" into "`which gcc` -E" ie
# extract the full path to the binary and at the
@@ -11980,7 +13703,7 @@
MCS="$car"
fi
-else
+elif test "x$OPENJDK_BUILD_OS" != xwindows; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
set dummy ${ac_tool_prefix}nm; ac_word=$2
@@ -12459,6 +14182,92 @@
fi
+if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $LIPO in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_LIPO="$LIPO" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_LIPO="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+LIPO=$ac_cv_path_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+ # Translate "gcc -E" into "`which gcc` -E" ie
+ # extract the full path to the binary and at the
+ # same time maintain any arguments passed to it.
+ # The command MUST exist in the path, or else!
+ tmp="$LIPO"
+ car="${tmp%% *}"
+ tmp="$LIPO EOL"
+ cdr="${tmp#* }"
+ # On windows we want paths without spaces.
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+
+ # Translate long cygdrive or C:\sdfsf path
+ # into a short mixed mode path that has no
+ # spaces in it.
+ tmp="$car"
+
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ tmp=`$CYGPATH -u "$car"`
+ tmp=`which "$tmp"`
+ # If file exists with .exe appended, that's the real filename
+ # and cygpath needs that to convert to short style path.
+ if test -f "${tmp}.exe"; then
+ tmp="${tmp}.exe"
+ elif test -f "${tmp}.cmd"; then
+ tmp="${tmp}.cmd"
+ fi
+ # Convert to C:/ mixed style path without spaces.
+ tmp=`$CYGPATH -s -m "$tmp"`
+ fi
+ car="$tmp"
+
+ else
+ # "which" is not portable, but is used here
+ # because we know that the command exists!
+ car=`which $car`
+ fi
+ if test "x$cdr" != xEOL; then
+ LIPO="$car ${cdr% *}"
+ else
+ LIPO="$car"
+ fi
+
+fi
+
# Restore old path without tools dir
PATH="$OLD_PATH"
@@ -12604,16 +14413,71 @@
# (The JVM can use 32 or 64 bit Java pointers but that decision
# is made at runtime.)
#
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-OLD_CXXFLAGS="$CXXFLAGS"
-if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then
- CXXFLAGS="-m${with_target_bits} $CXXFLAGS"
-fi
+if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Always specify -m flags on Solaris
+
+ # keep track of c/cxx flags that we added outselves...
+ # to prevent emitting warning...
+ ADDED_CFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_CXXFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_LDFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+
+ CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
+ CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
+ LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
+
+ CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
+ LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
+
+elif test "x$COMPILE_TYPE" = xreduced; then
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # Specify -m if running reduced on other Posix platforms
+
+ # keep track of c/cxx flags that we added outselves...
+ # to prevent emitting warning...
+ ADDED_CFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_CXXFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_LDFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+
+ CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
+ CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
+ LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
+
+ CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
+ LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
+
+ fi
+fi
+
+# Make compilation sanity check
+for ac_header in stdio.h
+do :
+ ac_fn_cxx_check_header_mongrel "$LINENO" "stdio.h" "ac_cv_header_stdio_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdio_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_STDIO_H 1
+_ACEOF
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Failed to compile stdio.h. This likely implies missing compile dependencies." >&5
+$as_echo "$as_me: Failed to compile stdio.h. This likely implies missing compile dependencies." >&6;}
+ if test "x$COMPILE_TYPE" = xreduced; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a reduced build. Check that you have 32-bit libraries installed." >&5
+$as_echo "$as_me: You are doing a reduced build. Check that you have 32-bit libraries installed." >&6;}
+ elif test "x$COMPILE_TYPE" = xcross; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&5
+$as_echo "$as_me: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&6;}
+ fi
+ as_fn_error $? "Cannot continue." "$LINENO" 5
+
+fi
+
+done
+
+
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
@@ -12647,85 +14511,28 @@
_ACEOF
-CXXFLAGS="$OLD_CXXFLAGS"
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-# keep track of c/cxx flags that we added outselves...
-# to prevent emitting warning...
-ADDED_CFLAGS=
-ADDED_CXXFLAGS=
-ADDED_LDFLAGS=
-
-if test "x$ac_cv_sizeof_int_p" = x0; then
- # The test failed, lets pick the assumed value.
- ARCH_DATA_MODEL=$OPENJDK_TARGET_CPU_BITS
-else
- ARCH_DATA_MODEL=`expr 8 \* $ac_cv_sizeof_int_p`
-
- if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then
- ADDED_CFLAGS=" -m${with_target_bits}"
- ADDED_CXXFLAGS=" -m${with_target_bits}"
- ADDED_LDFLAGS=" -m${with_target_bits}"
-
- CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
- CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
- LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
-
- CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
- fi
-fi
-
-if test "x$ARCH_DATA_MODEL" = x64; then
- A_LP64="LP64:="
- ADD_LP64="-D_LP64=1"
-fi
+
+if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
+ # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
+ SIZEOF_INT_P="$ac_cv_sizeof_int_p"
+fi
+
+if test "x$SIZEOF_INT_P" = x; then
+ # The test failed, lets stick to the assumed value.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&5
+$as_echo "$as_me: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&2;}
+else
+ TESTED_TARGET_CPU_BITS=`expr 8 \* $SIZEOF_INT_P`
+
+ if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
+ as_fn_error $? "The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" "$LINENO" 5
+ fi
+fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for target address size" >&5
$as_echo_n "checking for target address size... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ARCH_DATA_MODEL bits" >&5
-$as_echo "$ARCH_DATA_MODEL bits" >&6; }
-LP64=$A_LP64
-
-
-
-if test "x$ARCH_DATA_MODEL" != "x$OPENJDK_TARGET_CPU_BITS"; then
- as_fn_error $? "The tested number of bits in the target ($ARCH_DATA_MODEL) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" "$LINENO" 5
-fi
-
-#
-# NOTE: check for -mstackrealign needs to be below potential addition of -m32
-#
-if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
- # While waiting for a better solution, the current workaround is to use -mstackrealign.
- CFLAGS="$CFLAGS -mstackrealign"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 32-bit compiler supports -mstackrealign" >&5
-$as_echo_n "checking if 32-bit compiler supports -mstackrealign... " >&6; }
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-int main() { return 0; }
-_ACEOF
-if ac_fn_cxx_try_link "$LINENO"; then :
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-else
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path." "$LINENO" 5
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_CPU_BITS bits" >&5
+$as_echo "$OPENJDK_TARGET_CPU_BITS bits" >&6; }
###############################################################################
@@ -12956,15 +14763,9 @@
if test "x$ENDIAN" = xuniversal_endianness; then
as_fn_error $? "Building with both big and little endianness is not supported" "$LINENO" 5
fi
-if test "x$ENDIAN" = xunknown; then
- ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN"
-fi
if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)" >&5
-$as_echo "$as_me: WARNING: The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)" >&2;}
- ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN"
-fi
-
+ as_fn_error $? "The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)" "$LINENO" 5
+fi
# Configure flags for the tools
@@ -12990,15 +14791,13 @@
SET_SHARED_LIBRARY_MAPFILE='-Xlinker -version-script=$1'
C_FLAG_REORDER=''
CXX_FLAG_REORDER=''
- SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN/$1'
+ SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN$1'
+ SET_EXECUTABLE_ORIGIN='-Xlinker -rpath -Xlinker \$$$$ORIGIN$1'
LD="$CC"
LDEXE="$CC"
LDCXX="$CXX"
LDEXECXX="$CXX"
POST_STRIP_CMD="$STRIP -g"
- if test "x$JDK_VARIANT" = xembedded; then
- POST_STRIP_CMD="$STRIP --strip-unneeded"
- fi
# Linking is different on MacOSX
if test "x$OPENJDK_BUILD_OS" = xmacosx; then
@@ -13011,6 +14810,7 @@
SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/$1'
SET_SHARED_LIBRARY_MAPFILE=''
SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
POST_STRIP_CMD="$STRIP -S"
fi
else
@@ -13021,7 +14821,7 @@
LIBRARY_PREFIX=lib
SHARED_LIBRARY='lib$1.so'
STATIC_LIBRARY='lib$1.a'
- SHARED_LIBRARY_FLAGS="-z defs -xildoff -ztext -G"
+ SHARED_LIBRARY_FLAGS="-G"
SHARED_LIBRARY_SUFFIX='.so'
STATIC_LIBRARY_SUFFIX='.a'
OBJ_SUFFIX='.o'
@@ -13030,7 +14830,8 @@
SET_SHARED_LIBRARY_MAPFILE='-M$1'
C_FLAG_REORDER='-xF'
CXX_FLAG_REORDER='-xF'
- SET_SHARED_LIBRARY_ORIGIN='-R \$$$$ORIGIN/$1'
+ SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN$1'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
CFLAGS_JDKLIB_EXTRA='-xstrconst'
@@ -13052,8 +14853,10 @@
SET_SHARED_LIBRARY_NAME=''
SET_SHARED_LIBRARY_MAPFILE=''
SET_SHARED_LIBRARY_ORIGIN=''
- fi
-fi
+ SET_EXECUTABLE_ORIGIN=''
+ fi
+fi
+
@@ -13081,6 +14884,36 @@
# Setup the opt flags for different compilers
# and different operating systems.
#
+
+#
+# NOTE: check for -mstackrealign needs to be below potential addition of -m32
+#
+if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
+ # While waiting for a better solution, the current workaround is to use -mstackrealign.
+ CFLAGS="$CFLAGS -mstackrealign"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if 32-bit compiler supports -mstackrealign" >&5
+$as_echo_n "checking if 32-bit compiler supports -mstackrealign... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int main() { return 0; }
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ as_fn_error $? "The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path." "$LINENO" 5
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+
C_FLAG_DEPS="-MMD -MF"
CXX_FLAG_DEPS="-MMD -MF"
@@ -13105,7 +14938,7 @@
CXXFLAGS_DEBUG_SYMBOLS="-g"
if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
CFLAGS_DEBUG_SYMBOLS="-g1"
- CXXFLAGS_DEBUG_SYMBOLSG="-g1"
+ CXXFLAGS_DEBUG_SYMBOLS="-g1"
fi
;;
esac
@@ -13117,52 +14950,56 @@
#
# Forte has different names for this with their C++ compiler...
#
- C_FLAG_DEPS="-xMMD -xMF"
- CXX_FLAG_DEPS="-xMMD -xMF"
-
-# Extra options used with HIGHEST
-#
-# WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
-# done with care, there are some assumptions below that need to
-# be understood about the use of pointers, and IEEE behavior.
-#
-# Use non-standard floating point mode (not IEEE 754)
-CC_HIGHEST="$CC_HIGHEST -fns"
-# Do some simplification of floating point arithmetic (not IEEE 754)
-CC_HIGHEST="$CC_HIGHEST -fsimple"
-# Use single precision floating point with 'float'
-CC_HIGHEST="$CC_HIGHEST -fsingle"
-# Assume memory references via basic pointer types do not alias
-# (Source with excessing pointer casting and data access with mixed
-# pointer types are not recommended)
-CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
-# Use intrinsic or inline versions for math/std functions
-# (If you expect perfect errno behavior, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
-# Loop data dependency optimizations (need -xO3 or higher)
-CC_HIGHEST="$CC_HIGHEST -xdepend"
-# Pointer parameters to functions do not overlap
-# (Similar to -xalias_level=basic usage, but less obvious sometimes.
-# If you pass in multiple pointers to the same data, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xrestrict"
-# Inline some library routines
-# (If you expect perfect errno behavior, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xlibmil"
-# Use optimized math routines
-# (If you expect perfect errno behavior, do not use this)
-# Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
-#CC_HIGHEST="$CC_HIGHEST -xlibmopt"
-
- case $LEGACY_OPENJDK_TARGET_CPU1 in
- i586)
- C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xchip=pentium"
- C_O_FLAG_HI="-xO4 -Wu,-O4~yz"
- C_O_FLAG_NORM="-xO2 -Wu,-O2~yz"
- C_O_FLAG_NONE=""
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xchip=pentium"
- CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz"
- CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz"
- CXX_O_FLAG_NONE=""
+ C_FLAG_DEPS="-xMMD -xMF"
+ CXX_FLAG_DEPS="-xMMD -xMF"
+
+ # Extra options used with HIGHEST
+ #
+ # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
+ # done with care, there are some assumptions below that need to
+ # be understood about the use of pointers, and IEEE behavior.
+ #
+ # Use non-standard floating point mode (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fns"
+ # Do some simplification of floating point arithmetic (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fsimple"
+ # Use single precision floating point with 'float'
+ CC_HIGHEST="$CC_HIGHEST -fsingle"
+ # Assume memory references via basic pointer types do not alias
+ # (Source with excessing pointer casting and data access with mixed
+ # pointer types are not recommended)
+ CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
+ # Use intrinsic or inline versions for math/std functions
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
+ # Loop data dependency optimizations (need -xO3 or higher)
+ CC_HIGHEST="$CC_HIGHEST -xdepend"
+ # Pointer parameters to functions do not overlap
+ # (Similar to -xalias_level=basic usage, but less obvious sometimes.
+ # If you pass in multiple pointers to the same data, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xrestrict"
+ # Inline some library routines
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xlibmil"
+ # Use optimized math routines
+ # (If you expect perfect errno behavior, do not use this)
+ # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
+ #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
+
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86)
+ C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
+ C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
+ C_O_FLAG_NONE="-xregs=no%frameptr"
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NONE="-xregs=no%frameptr"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
+ fi
;;
sparc)
CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
@@ -13186,9 +15023,11 @@
;;
CL )
D_FLAG=
- C_O_FLAG_HI="-O2"
+ C_O_FLAG_HIGHEST="-O2"
+ C_O_FLAG_HI="-O1"
C_O_FLAG_NORM="-O1"
C_O_FLAG_NONE="-Od"
+ CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
CXX_O_FLAG_HI="$C_O_FLAG_HI"
CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
@@ -13217,18 +15056,18 @@
if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags\"" >&5
-$as_echo "$as_me: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags" >&5
+$as_echo "$as_me: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags" >&2;}
fi
if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags\"" >&5
-$as_echo "$as_me: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags" >&5
+$as_echo "$as_me: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags" >&2;}
fi
if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags\"" >&5
-$as_echo "$as_me: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags" >&5
+$as_echo "$as_me: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags" >&2;}
fi
@@ -13256,6 +15095,15 @@
CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
+# Hotspot needs these set in their legacy form
+LEGACY_EXTRA_CFLAGS=$with_extra_cflags
+LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
+LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
+
+
+
+
+
###############################################################################
#
# Now setup the CFLAGS and LDFLAGS for the JDK build.
@@ -13281,19 +15129,30 @@
esac
;;
ossc )
- CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -norunpath -xnolib"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX"
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -Di386"
+ CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
+ ;;
+ esac
+
+ CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
+
+ LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
+ LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
;;
cl )
CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
-D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
-D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
-DWIN32 -DIAL"
- case $LEGACY_OPENJDK_TARGET_CPU1 in
- i?86 )
+ case $OPENJDK_TARGET_CPU in
+ x86 )
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
;;
- amd64 )
+ x86_64 )
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
;;
esac
@@ -13301,24 +15160,6 @@
esac
###############################################################################
-#
-# Cross-compile arch specific flags
-
-#
-if test "x$JDK_VARIANT" = "xembedded"; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DJAVASE_EMBEDDED"
-fi
-
-case $OPENJDK_TARGET_CPU_ARCH in
-arm )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fsigned-char"
- ;;
-ppc )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fsigned-char"
- ;;
-esac
-
-###############################################################################
CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
@@ -13326,11 +15167,17 @@
PACKAGE_PATH=/opt/local
-# Sometimes we use a cpu dir (.../lib/amd64/server)
-# Sometimes not (.../lib/server)
-LIBARCHDIR="$LEGACY_OPENJDK_TARGET_CPU2/"
-if test "x$ENDIAN" = xlittle; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
+ # The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
+ # Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
+ # (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
+ # Note: -Dmacro is the same as #define macro 1
+ # -Dmacro= is the same as #define macro
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
+ else
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+ fi
else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN"
fi
@@ -13345,27 +15192,29 @@
fi
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE"
- LIBARCHDIR=""
fi
if test "x$OPENJDK_TARGET_OS" = xbsd; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE"
fi
if test "x$DEBUG_LEVEL" = xrelease; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
+ fi
else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG"
fi
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$LEGACY_OPENJDK_TARGET_CPU1\"' -D$LEGACY_OPENJDK_TARGET_CPU1"
+CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
-I${JDK_OUTPUTDIR}/include \
-I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
-I${JDK_TOPDIR}/src/share/javavm/export \
- -I${JDK_TOPDIR}/src/$LEGACY_OPENJDK_TARGET_OS_API/javavm/export \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
-I${JDK_TOPDIR}/src/share/native/common \
- -I${JDK_TOPDIR}/src/$LEGACY_OPENJDK_TARGET_OS_API/native/common"
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
# The shared libraries are compiled using the picflag.
CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
@@ -13385,7 +15234,7 @@
# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
if test "x$COMPILER_TYPE" = xCL; then
LDFLAGS_JDK="$LDFLAGS_JDK -nologo -opt:ref -incremental:no"
- if test "x$LEGACY_OPENJDK_TARGET_CPU1" = xi586; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
fi
# TODO: make -debug optional "--disable-full-debug-symbols"
@@ -13413,20 +15262,18 @@
fi
LDFLAGS_JDKLIB="${LDFLAGS_JDK} $SHARED_LIBRARY_FLAGS \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}server \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}client \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}"
- LDFLAGS_JDKLIB_SUFFIX="-ljvm -ljava"
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server \
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client \
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
+
+ LDFLAGS_JDKLIB_SUFFIX="-ljava -ljvm"
if test "x$COMPILER_NAME" = xossc; then
LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
fi
- # Only the jli library is explicitly linked when the launchers are built.
- # The libjvm is then dynamically loaded/linked by the launcher.
LDFLAGS_JDKEXE="${LDFLAGS_JDK}"
- if test "x$OPENJDK_TARGET_OS" != "xmacosx"; then
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}jli"
- LDFLAGS_JDKEXE_SUFFIX="-ljli"
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
fi
fi
@@ -13459,6 +15306,7 @@
+
# After we have toolchain, we can compile the uncygdrive helper
# When using cygwin, we need a wrapper binary that renames
@@ -13498,6 +15346,8 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
rm -f $OUTPUT_ROOT/uncygdrive?.??? $OUTPUT_ROOT/uncygdrive.obj
+ # The path to uncygdrive to use should be Unix-style
+ UNCYGDRIVE="$OUTPUT_ROOT/uncygdrive.exe"
fi
@@ -13517,11 +15367,6 @@
ENABLE_DEBUG_SYMBOLS=no
fi
-# default for embedded is no...
-if test "x$JDK_VARIANT" = "xembedded"; then
- ENABLE_DEBUG_SYMBOLS=no
-fi
-
# Check whether --enable-debug-symbols was given.
if test "${enable_debug_symbols+set}" = set; then :
enableval=$enable_debug_symbols; ENABLE_DEBUG_SYMBOLS=${enable_debug_symbols}
@@ -13644,6 +15489,10 @@
FREETYPE2_NOT_NEEDED=yes
fi
+if test "x$SUPPORT_HEADFUL" = xno; then
+ X11_NOT_NEEDED=yes
+fi
+
###############################################################################
#
# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
@@ -14817,7 +16666,11 @@
HAS_SPACE=`echo "$with_freetype" | grep " "`
if test "x$HAS_SPACE" != x; then
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # First convert it to DOS-style, short mode (no spaces)
with_freetype=`$CYGPATH -s -m -a "$with_freetype"`
+ # Now it's case insensitive; let's make it lowercase to improve readability
+ with_freetype=`$ECHO "$with_freetype" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvqxyz'`
+ # Now convert it back to Unix-stile (cygpath)
with_freetype=`$CYGPATH -u "$with_freetype"`
else
as_fn_error $? "You cannot have spaces in the path to freetype! \"$with_freetype\"" "$LINENO" 5
@@ -15677,9 +17530,7 @@
###############################################################################
LIBZIP_CAN_USE_MMAP=true
-if test "x$JDK_VARIANT" = "xembedded"; then
- LIBZIP_CAN_USE_MMAP=false
-fi
+
###############################################################################
@@ -15956,7 +17807,7 @@
# libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
- LIBCXX="/usr/lib${LEGACY_OPENJDK_TARGET_CPU3}/libCrun.so.1"
+ LIBCXX="/usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libCrun.so.1"
fi
# TODO better (platform agnostic) test
@@ -15975,7 +17826,7 @@
###############################################################################
-HOTSPOT_MAKE_ARGS="ALT_OUTPUTDIR=$HOTSPOT_OUTPUTDIR ALT_EXPORT_PATH=$HOTSPOT_DIST $HOTSPOT_TARGET"
+HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
# The name of the Service Agent jar.
@@ -16011,27 +17862,19 @@
FOUND_CORES=no
if test -f /proc/cpuinfo; then
- # Looks like a Linux system
+ # Looks like a Linux (or cygwin) system
NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
FOUND_CORES=yes
- fi
-
- if test -x /usr/sbin/psrinfo; then
+ elif test -x /usr/sbin/psrinfo; then
# Looks like a Solaris system
NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
FOUND_CORES=yes
- fi
-
- if test -x /usr/sbin/system_profiler; then
+ elif test -x /usr/sbin/system_profiler; then
# Looks like a MacOSX system
NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print $5}'`
FOUND_CORES=yes
fi
- if test "x$build_os" = xwindows; then
- NUM_CORES=4
- fi
-
# For c/c++ code we run twice as many concurrent build
# jobs than we have cores, otherwise we will stall on io.
CONCURRENT_BUILD_JOBS=`expr $NUM_CORES \* 2`
@@ -16065,31 +17908,26 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for memory size" >&5
$as_echo_n "checking for memory size... " >&6; }
- # Default to 1024MB
+ # Default to 1024 MB
MEMORY_SIZE=1024
FOUND_MEM=no
- if test -f /proc/cpuinfo; then
- # Looks like a Linux system
+ if test -f /proc/meminfo; then
+ # Looks like a Linux (or cygwin) system
MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print $2}'`
MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
FOUND_MEM=yes
- fi
-
- if test -x /usr/sbin/prtconf; then
+ elif test -x /usr/sbin/prtconf; then
# Looks like a Solaris system
MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print $3 }'`
FOUND_MEM=yes
- fi
-
- if test -x /usr/sbin/system_profiler; then
+ elif test -x /usr/sbin/system_profiler; then
# Looks like a MacOSX system
MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print $2}'`
MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
FOUND_MEM=yes
- fi
-
- if test "x$build_os" = xwindows; then
+ elif test "x$build_os" = xwindows; then
+ # Windows, but without cygwin
MEMORY_SIZE=`systeminfo | grep 'Total Physical Memory:' | awk '{ print $4 }' | sed 's/,//'`
FOUND_MEM=yes
fi
@@ -16098,8 +17936,8 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MEMORY_SIZE MB" >&5
$as_echo "$MEMORY_SIZE MB" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size defaulting to 1024MB!" >&5
-$as_echo "could not detect memory size defaulting to 1024MB!" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size defaulting to 1024 MB!" >&5
+$as_echo "could not detect memory size defaulting to 1024 MB!" >&6; }
fi
else
@@ -16111,82 +17949,52 @@
# Setup smart javac (after cores and memory have been setup)
-# Check whether --with-server-java was given.
-if test "${with_server_java+set}" = set; then :
- withval=$with_server_java;
-fi
-
-
-if test "x$with_server_java" != x; then
- SERVER_JAVA="$with_server_java"
- FOUND_VERSION=`$SERVER_JAVA -version 2>&1 | grep " version \""`
+# Check whether --with-sjavac-server-java was given.
+if test "${with_sjavac_server_java+set}" = set; then :
+ withval=$with_sjavac_server_java;
+fi
+
+
+if test "x$with_sjavac_server_java" != x; then
+ SJAVAC_SERVER_JAVA="$with_sjavac_server_java"
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" = x; then
- as_fn_error $? "Could not execute server java: $SERVER_JAVA" "$LINENO" 5
- fi
-else
- SERVER_JAVA=""
+ as_fn_error $? "Could not execute server java: $SJAVAC_SERVER_JAVA" "$LINENO" 5
+ fi
+else
+ SJAVAC_SERVER_JAVA=""
# Hotspot specific options.
- # Test if -XX:+UseParallelOldGC is a valid argument to $JAVA (often is $JAVA passed as $JAVA)
- # If so, then append -XX:+UseParallelOldGC to SERVER_JAVA
- FOUND_WARN=`$JAVA -XX:+UseParallelOldGC -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$JAVA -XX:+UseParallelOldGC -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -XX:+UseParallelOldGC"
- fi
-
-
# Test if -verbosegc is a valid argument to $JAVA (often is $JAVA passed as $JAVA)
- # If so, then append -verbosegc to SERVER_JAVA
+ # If so, then append -verbosegc to SJAVAC_SERVER_JAVA
FOUND_WARN=`$JAVA -verbosegc -version 2>&1 | grep -i warn`
FOUND_VERSION=`$JAVA -verbosegc -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -verbosegc"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -verbosegc"
fi
# JRockit specific options.
# Test if -Xverbose:gc is a valid argument to $JAVA (often is $JAVA passed as $JAVA)
- # If so, then append -Xverbose:gc to SERVER_JAVA
+ # If so, then append -Xverbose:gc to SJAVAC_SERVER_JAVA
FOUND_WARN=`$JAVA -Xverbose:gc -version 2>&1 | grep -i warn`
FOUND_VERSION=`$JAVA -Xverbose:gc -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xverbose:gc"
- fi
-
- SERVER_JAVA="$JAVA $SERVER_JAVA"
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use shared server for javac" >&5
-$as_echo_n "checking whether to use shared server for javac... " >&6; }
-# Check whether --enable-javac-server was given.
-if test "${enable_javac_server+set}" = set; then :
- enableval=$enable_javac_server; ENABLE_JAVAC_SERVER="${enableval}"
-else
- ENABLE_JAVAC_SERVER='no'
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_SERVER" >&5
-$as_echo "$ENABLE_JAVAC_SERVER" >&6; }
-if test "x$ENABLE_JAVAC_SERVER" = xyes; then
- JAVAC_USE_REMOTE=true
- JAVAC_SERVERS="$OUTPUT_ROOT/javacservers"
-else
- JAVAC_USE_REMOTE=false
- JAVAC_SERVERS=
-fi
-
-
-
-
-# Check whether --with-javac-server-cores was given.
-if test "${with_javac_server_cores+set}" = set; then :
- withval=$with_javac_server_cores;
-fi
-
-if test "x$with_javac_server_cores" != x; then
- JAVAC_SERVER_CORES="$with_javac_server_cores"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xverbose:gc"
+ fi
+
+ SJAVAC_SERVER_JAVA="$JAVA $SJAVAC_SERVER_JAVA"
+fi
+
+
+
+# Check whether --with-sjavac-server-cores was given.
+if test "${with_sjavac_server_cores+set}" = set; then :
+ withval=$with_sjavac_server_cores;
+fi
+
+if test "x$with_sjavac_server_cores" != x; then
+ SJAVAC_SERVER_CORES="$with_sjavac_server_cores"
else
if test "$NUM_CORES" -gt 16; then
# We set this arbitrary limit because we want to limit the heap
@@ -16194,237 +18002,152 @@
# In the future we will make the javac compilers in the server
# share more and more state, thus enabling us to use more and
# more concurrent threads in the server.
- JAVAC_SERVER_CORES="16"
- else
- JAVAC_SERVER_CORES="$NUM_CORES"
+ SJAVAC_SERVER_CORES="16"
+ else
+ SJAVAC_SERVER_CORES="$NUM_CORES"
fi
if test "$MEMORY_SIZE" -gt "17000"; then
MAX_HEAP_MEM=10000
- # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -d64 to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
+ # Test if -d64 is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -d64 to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -d64"
- fi
-
-
- # Test if -Xms10G -Xmx10G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms10G -Xmx10G to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep " version \""`
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -d64"
+ fi
+
+
+ # Test if -Xms10G -Xmx10G is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms10G -Xmx10G to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms10G -Xmx10G"
- fi
-
-
- # Test if -Xmn2G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn2G to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn2G -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn2G -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn2G"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G"
fi
elif test "$MEMORY_SIZE" -gt "10000"; then
MAX_HEAP_MEM=6000
- # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -d64 to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
+ # Test if -d64 is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -d64 to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -d64"
- fi
-
-
- # Test if -Xms6G -Xmx6G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms6G -Xmx6G to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep " version \""`
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -d64"
+ fi
+
+
+ # Test if -Xms6G -Xmx6G is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms6G -Xmx6G to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms6G -Xmx6G"
- fi
-
-
- # Test if -Xmn1G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn1G to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn1G -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn1G -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn1G"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G"
fi
elif test "$MEMORY_SIZE" -gt "5000"; then
MAX_HEAP_MEM=3000
- # Test if -d64 is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -d64 to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
+ # Test if -d64 is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -d64 to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -d64"
- fi
-
-
- # Test if -Xms1G -Xmx3G is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms1G -Xmx3G to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep " version \""`
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -d64"
+ fi
+
+
+ # Test if -Xms1G -Xmx3G is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms1G -Xmx3G to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms1G -Xmx3G"
- fi
-
-
- # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn256M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn256M"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G"
fi
elif test "$MEMORY_SIZE" -gt "3800"; then
MAX_HEAP_MEM=2500
- # Test if -Xms1G -Xmx2500M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms1G -Xmx2500M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep " version \""`
+ # Test if -Xms1G -Xmx2500M is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms1G -Xmx2500M to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms1G -Xmx2500M"
- fi
-
-
- # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn256M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn256M"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M"
fi
elif test "$MEMORY_SIZE" -gt "1900"; then
MAX_HEAP_MEM=1200
- # Test if -Xms700M -Xmx1200M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms700M -Xmx1200M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms700M -Xmx1200M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms700M -Xmx1200M -version 2>&1 | grep " version \""`
+ # Test if -Xms700M -Xmx1400M is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms700M -Xmx1400M to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms700M -Xmx1400M -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms700M -Xmx1400M -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms700M -Xmx1200M"
- fi
-
-
- # Test if -Xmn256M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn256M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn256M -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn256M"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms700M -Xmx1400M"
fi
elif test "$MEMORY_SIZE" -gt "1000"; then
MAX_HEAP_MEM=900
- # Test if -Xms400M -Xmx900M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms400M -Xmx900M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms400M -Xmx900M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms400M -Xmx900M -version 2>&1 | grep " version \""`
+ # Test if -Xms400M -Xmx1100M is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms400M -Xmx1100M to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms400M -Xmx900M"
- fi
-
-
- # Test if -Xmn128M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn128M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn128M"
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M"
fi
else
MAX_HEAP_MEM=512
- # Test if -Xms256M -Xmx512M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xms256M -Xmx512M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep " version \""`
+ # Test if -Xms256M -Xmx512M is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -Xms256M -Xmx512M to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version 2>&1 | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M"
+ fi
+
+ fi
+
+
+ # Test if -XX:PermSize=32m is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -XX:PermSize=32m to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -XX:PermSize=32m -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -XX:PermSize=32m -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xms256M -Xmx512M"
- fi
-
-
- # Test if -Xmn128M is a valid argument to $SERVER_JAVA (often is $JAVA passed as $SERVER_JAVA)
- # If so, then append -Xmn128M to SERVER_JAVA
- FOUND_WARN=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep -i warn`
- FOUND_VERSION=`$SERVER_JAVA -Xmn128M -version 2>&1 | grep " version \""`
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -XX:PermSize=32m"
+ fi
+
+
+ # Test if -XX:MaxPermSize=160m is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -XX:MaxPermSize=160m to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -XX:MaxPermSize=160m -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -XX:MaxPermSize=160m -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SERVER_JAVA="$SERVER_JAVA -Xmn128M"
- fi
-
- fi
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -XX:MaxPermSize=160m"
+ fi
+
+
+ # Test if -XX:ThreadStackSize=$STACK_SIZE is a valid argument to $SJAVAC_SERVER_JAVA (often is $JAVA passed as $SJAVAC_SERVER_JAVA)
+ # If so, then append -XX:ThreadStackSize=$STACK_SIZE to SJAVAC_SERVER_JAVA
+ FOUND_WARN=`$SJAVAC_SERVER_JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1 | grep -i warn`
+ FOUND_VERSION=`$SJAVAC_SERVER_JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1 | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -XX:ThreadStackSize=$STACK_SIZE"
+ fi
+
MAX_COMPILERS_IN_HEAP=`expr $MAX_HEAP_MEM / 501`
- if test "$JAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then
+ if test "$SJAVAC_SERVER_CORES" -gt "$MAX_COMPILERS_IN_HEAP"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if number of server cores must be reduced" >&5
$as_echo_n "checking if number of server cores must be reduced... " >&6; }
- JAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&5
-$as_echo "yes, to $JAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&6; }
- fi
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to track dependencies between Java packages" >&5
-$as_echo_n "checking whether to track dependencies between Java packages... " >&6; }
-# Check whether --enable-javac-deps was given.
-if test "${enable_javac_deps+set}" = set; then :
- enableval=$enable_javac_deps; ENABLE_JAVAC_DEPS="${enableval}"
-else
- ENABLE_JAVAC_DEPS='no'
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_DEPS" >&5
-$as_echo "$ENABLE_JAVAC_DEPS" >&6; }
-if test "x$ENABLE_JAVAC_DEPS" = xyes; then
- JAVAC_USE_DEPS=true
-else
- JAVAC_USE_DEPS=false
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use multiple cores for javac compilation" >&5
-$as_echo_n "checking whether to use multiple cores for javac compilation... " >&6; }
-# Check whether --enable-javac-multi-core was given.
-if test "${enable_javac_multi_core+set}" = set; then :
- enableval=$enable_javac_multi_core; ENABLE_JAVAC_MULTICORE="${enableval}"
-else
- ENABLE_JAVAC_MULTICORE='no'
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_JAVAC_MULTICORE" >&5
-$as_echo "$ENABLE_JAVAC_MULTICORE" >&6; }
-if test "x$ENABLE_JAVAC_MULTICORE" = xyes; then
- JAVAC_USE_MODE=MULTI_CORE_CONCURRENT
-else
- JAVAC_USE_MODE=SINGLE_THREADED_BATCH
- if test "x$ENABLE_JAVAC_DEPS" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options." >&5
-$as_echo "$as_me: WARNING: Dependency tracking is not supported with single threaded batch compiles of Java source roots. Please add --disable-javac-deps to your configure options." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling dependency tracking for you now." >&5
-$as_echo "$as_me: WARNING: Disabling dependency tracking for you now." >&2;}
- JAVAC_USE_DEPS=false
- fi
- if test "x$ENABLE_JAVAC_SERVER" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options." >&5
-$as_echo "$as_me: WARNING: The javac server will not be used since single threaded batch compiles are run within their own JVM. Please add --disable-javac-server to your configure options." >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Disabling javac server for you now." >&5
-$as_echo "$as_me: WARNING: Disabling javac server for you now." >&2;}
- JAVAC_USE_REMOTE=false
+ SJAVAC_SERVER_CORES="$MAX_COMPILERS_IN_HEAP"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, to $SJAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&5
+$as_echo "yes, to $SJAVAC_SERVER_CORES with max heap size $MAX_HEAP_MEM MB" >&6; }
fi
fi
@@ -16442,6 +18165,13 @@
$as_echo "$ENABLE_SJAVAC" >&6; }
+if test "x$ENABLE_SJAVAC" = xyes; then
+ SJAVAC_SERVER_DIR="$OUTPUT_ROOT/javacservers"
+else
+ SJAVAC_SERVER_DIR=
+fi
+
+
# Can the C/C++ compiler use precompiled headers?
@@ -16666,7 +18396,7 @@
-# At the end, call the closed hook. (Dummy macro if no closed sources available)
+# At the end, call the custom hook. (Dummy macro if no custom sources available)
# We're messing a bit with internal autoconf variables to put the config.status
@@ -17365,6 +19095,9 @@
case $ac_config_target in
"$OUTPUT_ROOT/config.h") CONFIG_HEADERS="$CONFIG_HEADERS $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in" ;;
"$OUTPUT_ROOT/spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in" ;;
+ "$OUTPUT_ROOT/hotspot-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in" ;;
+ "$OUTPUT_ROOT/bootcycle-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in" ;;
+ "$OUTPUT_ROOT/compare.sh") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in" ;;
"$OUTPUT_ROOT/spec.sh") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in" ;;
"$OUTPUT_ROOT/Makefile") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in" ;;
@@ -17946,6 +19679,9 @@
fi
+# Make the compare script executable
+$CHMOD +x $OUTPUT_ROOT/compare.sh
+
# Finally output some useful information to the user
# Finally output some useful information to the user
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/autoconf/hotspot-spec.gmk.in Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,90 @@
+#
+# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+
+# Chaining of spec files
+HOTSPOT_SPEC:=$(dir $(SPEC))hotspot-spec.gmk
+override SPEC=$(HOTSPOT_SPEC)
+# Now include the base spec.gmk file
+include $(BASE_SPEC)
+
+# Additional legacy variables defined for Hotspot
+
+@SET_OPENJDK@
+
+# Legacy defines controlled by the SUPPORT_HEADLESS and SUPPORT_HEADFUL options.
+@BUILD_HEADLESS@
+
+# Legacy setting: OPT or DBG
+VARIANT:=@VARIANT@
+# Legacy setting: true or false
+FASTDEBUG:=@FASTDEBUG@
+# Legacy setting: debugging the class files?
+DEBUG_CLASSFILES:=@DEBUG_CLASSFILES@
+
+ALT_CUPS_HEADERS_PATH:=$(patsubst -I%,%,$(filter -I%,@CUPS_CFLAGS@))
+
+# The HOSTCC/HOSTCXX is Hotspot terminology for the BUILD_CC/BUILD_CXX, i.e. the
+# compiler that produces code that can be run on the build platform.
+HOSTCC:=@UNCYGDRIVE@ @BUILD_CC@
+HOSTCXX:=@UNCYGDRIVE@ @BUILD_CXX@
+
+####################################################
+#
+# Legacy Hotspot support
+
+# If cross compiling, then define CROSS_COMPILE_ARCH:=cpu_name here.
+@DEFINE_CROSS_COMPILE_ARCH@
+
+# Old name for OPENJDK_TARGET_OS (aix,bsd,hpux,linux,macosx,solaris,windows etc)
+PLATFORM=$(OPENJDK_TARGET_OS)
+# 32 or 64 bit
+ARCH_DATA_MODEL=$(OPENJDK_TARGET_CPU_BITS)
+
+ALT_BOOTDIR=$(BOOT_JDK)
+# Can be /sparcv9 or /amd64 on Solaris
+ISA_DIR=$(OPENJDK_TARGET_CPU_ISADIR)
+# Yet another name for arch used for an extra subdir below the jvm lib.
+# Uses i386 and amd64, instead of x86 and x86_64.
+LIBARCH=$(OPENJDK_TARGET_CPU_LEGACY_LIB)
+# Old name for OPENJDK_TARGET_CPU, uses i586 and amd64, instead of x86 and x86_64.
+ARCH=$(OPENJDK_TARGET_CPU_LEGACY)
+# Legacy setting for building for a 64 bit machine.
+# If yes then this expands to _LP64:=1
+@LP64@
+
+ALT_OUTPUTDIR=$(HOTSPOT_OUTPUTDIR)
+ALT_EXPORT_PATH=$(HOTSPOT_DIST)
+
+HOTSPOT_MAKE_ARGS:=@HOTSPOT_MAKE_ARGS@
+# This is used from the libjvm build for C/C++ code.
+HOTSPOT_BUILD_JOBS:=@CONCURRENT_BUILD_JOBS@
+# Control wether Hotspot runs Queens test after building
+TEST_IN_BUILD=@TEST_IN_BUILD@
+
+
+EXTRA_CFLAGS=@LEGACY_EXTRA_CFLAGS@
+EXTRA_CXXFLAGS=@LEGACY_EXTRA_CXXFLAGS@
+EXTRA_LDFLAGS=@LEGACY_EXTRA_LDFLAGS@
--- a/common/autoconf/jdk-options.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/jdk-options.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -30,7 +30,7 @@
# Check which variant of the JDK that we want to build.
# Currently we have:
# normal: standard edition
-# embedded: cut down to a smaller footprint
+# but the custom make system may add other variants
#
# Effectively the JDK variant gives a name to a specific set of
# modules to compile into the JDK. In the future, these modules
@@ -38,22 +38,14 @@
#
AC_MSG_CHECKING([which variant of the JDK to build])
AC_ARG_WITH([jdk-variant], [AS_HELP_STRING([--with-jdk-variant],
- [JDK variant to build (normal, embedded) @<:@normal@:>@])])
+ [JDK variant to build (normal) @<:@normal@:>@])])
if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
- JAVASE_EMBEDDED=""
- MINIMIZE_RAM_USAGE=""
JDK_VARIANT="normal"
-elif test "x$with_jdk_variant" = xembedded; then
- JAVASE_EMBEDDED="JAVASE_EMBEDDED:=true"
- MINIMIZE_RAM_USAGE="MINIMIZE_RAM_USAGE:=true"
- JDK_VARIANT="embedded"
else
- AC_MSG_ERROR([The available JDK variants are: normal, embedded])
+ AC_MSG_ERROR([The available JDK variants are: normal])
fi
-
-AC_SUBST(JAVASE_EMBEDDED)
-AC_SUBST(MINIMIZE_RAM_USAGE)
+
AC_SUBST(JDK_VARIANT)
AC_MSG_RESULT([$JDK_VARIANT])
@@ -77,11 +69,7 @@
[JVM variants (separated by commas) to build (server, client, kernel, zero, zeroshark) @<:@server@:>@])])
if test "x$with_jvm_variants" = x; then
- if test "x$JDK_VARIANT" = xembedded; then
- with_jvm_variants="client"
- else
- with_jvm_variants="server"
- fi
+ with_jvm_variants="server"
fi
JVM_VARIANTS=",$with_jvm_variants,"
@@ -125,6 +113,11 @@
AC_SUBST(JVM_VARIANT_ZERO)
AC_SUBST(JVM_VARIANT_ZEROSHARK)
+if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ MACOSX_UNIVERSAL="true"
+fi
+
+AC_SUBST(MACOSX_UNIVERSAL)
])
@@ -223,6 +216,14 @@
HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
+# On Macosx universal binaries are produced, but they only contain
+# 64 bit intel. This invalidates control of which jvms are built
+# from configure, but only server is valid anyway. Fix this
+# when hotspot makefiles are rewritten.
+if test "x$MACOSX_UNIVERSAL" = xtrue; then
+ HOTSPOT_TARGET=universal_product
+fi
+
#####
AC_SUBST(DEBUG_LEVEL)
@@ -289,14 +290,12 @@
if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
- BUILD_HEADLESS_ONLY=""
headful_msg="inlude support for both headful and headless"
fi
if test "x$SUPPORT_HEADFUL" = xno; then
# Thus we are building headless only.
BUILD_HEADLESS="BUILD_HEADLESS:=true"
- BUILD_HEADLESS_ONLY="BUILD_HEADLESS_ONLY:=true"
headful_msg="headless only"
fi
@@ -305,23 +304,6 @@
AC_SUBST(SUPPORT_HEADLESS)
AC_SUBST(SUPPORT_HEADFUL)
AC_SUBST(BUILD_HEADLESS)
-AC_SUBST(BUILD_HEADLESS_ONLY)
-
-###############################################################################
-#
-# Should we run the painfully slow javadoc tool?
-#
-AC_MSG_CHECKING([whether to build documentation])
-AC_ARG_ENABLE([docs], [AS_HELP_STRING([--enable-docs],
- [enable generation of Javadoc documentation @<:@disabled@:>@])],
- [ENABLE_DOCS="${enableval}"], [ENABLE_DOCS='no'])
-AC_MSG_RESULT([$ENABLE_DOCS])
-AC_SUBST(ENABLE_DOCS)
-GENERATE_DOCS=false
-if test "x$ENABLE_DOCS" = xyes; then
- GENERATE_DOCS=true
-fi
-AC_SUBST(GENERATE_DOCS)
###############################################################################
#
@@ -373,25 +355,21 @@
#
COMPRESS_JARS=false
-# default for embedded is yes...
-if test "x$JDK_VARIANT" = "xembedded"; then
- COMPRESS_JARS=true
-fi
AC_SUBST(COMPRESS_JARS)
###############################################################################
#
# Should we compile JFR
-# default no, except for on closed-jdk and !embedded
+# default no, except for on closed-jdk
#
ENABLE_JFR=no
# Is the JFR source present
#
-# For closed && !embedded default is yes if the source is present
+# For closed default is yes
#
-if test "x${OPENJDK}" != "xtrue" && test "x$JDK_VARIANT" != "xembedded" && test -d "$SRC_ROOT/jdk/src/closed/share/native/oracle/jfr"; then
+if test "x${OPENJDK}" != "xtrue"; then
ENABLE_JFR=yes
fi
@@ -469,7 +447,7 @@
AC_DEFUN_ONCE([JDKOPT_SETUP_BUILD_TWEAKS],
[
-HOTSPOT_MAKE_ARGS="ALT_OUTPUTDIR=$HOTSPOT_OUTPUTDIR ALT_EXPORT_PATH=$HOTSPOT_DIST $HOTSPOT_TARGET"
+HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
AC_SUBST(HOTSPOT_MAKE_ARGS)
# The name of the Service Agent jar.
@@ -494,11 +472,6 @@
ENABLE_DEBUG_SYMBOLS=no
fi
-# default for embedded is no...
-if test "x$JDK_VARIANT" = "xembedded"; then
- ENABLE_DEBUG_SYMBOLS=no
-fi
-
AC_ARG_ENABLE([debug-symbols],
[AS_HELP_STRING([--disable-debug-symbols],[disable generation of debug symbols (@<:@enabled@:>@)])],
[ENABLE_DEBUG_SYMBOLS=${enable_debug_symbols}],
@@ -549,3 +522,11 @@
AC_SUBST(CFLAGS_DEBUG_SYMBOLS)
AC_SUBST(CXXFLAGS_DEBUG_SYMBOLS)
])
+
+# Support for customization of the build process. Some build files
+# will include counterparts from this location, if they exist. This allows
+# for a degree of customization of the build targets and the rules/recipes
+# to create them
+AC_ARG_WITH([custom-make-dir], [AS_HELP_STRING([--with-custom-make-dir],
+ [directory containing custom build/make files])], [CUSTOM_MAKE_DIR=$with_custom_make_dir])
+AC_SUBST(CUSTOM_MAKE_DIR)
--- a/common/autoconf/libraries.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/libraries.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -73,6 +73,10 @@
FREETYPE2_NOT_NEEDED=yes
fi
+if test "x$SUPPORT_HEADFUL" = xno; then
+ X11_NOT_NEEDED=yes
+fi
+
###############################################################################
#
# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
@@ -518,9 +522,7 @@
###############################################################################
LIBZIP_CAN_USE_MMAP=true
-if test "x$JDK_VARIANT" = "xembedded"; then
- LIBZIP_CAN_USE_MMAP=false
-fi
+
AC_SUBST(LIBZIP_CAN_USE_MMAP)
###############################################################################
@@ -629,7 +631,7 @@
# libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
- LIBCXX="/usr/lib${LEGACY_OPENJDK_TARGET_CPU3}/libCrun.so.1"
+ LIBCXX="/usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libCrun.so.1"
fi
# TODO better (platform agnostic) test
--- a/common/autoconf/platform.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/platform.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -23,279 +23,86 @@
# questions.
#
-AC_DEFUN([PLATFORM_EXTRACT_TARGET_AND_BUILD_AND_LEGACY_VARS],
-[
- # Expects $host_os $host_cpu $build_os and $build_cpu
- # and $with_target_bits to have been setup!
- #
- # Translate the standard triplet(quadruplet) definition
- # of the target/build system into
- # OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows
- # OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince
- # OPENJDK_TARGET_OS_API=posix,winapi
- #
- # OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64
- # OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm
- # OPENJDK_TARGET_CPU_BITS=32,64
- # OPENJDK_TARGET_CPU_ENDIAN=big,little
- #
- # The same values are setup for BUILD_...
- #
- # And the legacy variables, for controlling the old makefiles.
- # LEGACY_OPENJDK_TARGET_CPU1=i586,amd64/x86_64,sparc,sparcv9,arm,arm64...
- # LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,sparc,sparcv9,arm,arm64...
- # LEGACY_OPENJDK_TARGET_CPU3=sparcv9,amd64 (but only on solaris)
- # LEGACY_OPENJDK_TARGET_OS_API=solaris,windows
- #
- # We also copy the autoconf trip/quadruplet
- # verbatim to OPENJDK_TARGET_SYSTEM (from the autoconf "host") and OPENJDK_BUILD_SYSTEM
- OPENJDK_TARGET_SYSTEM="$host"
- OPENJDK_BUILD_SYSTEM="$build"
- AC_SUBST(OPENJDK_TARGET_SYSTEM)
- AC_SUBST(OPENJDK_BUILD_SYSTEM)
-
- PLATFORM_EXTRACT_VARS_FROM_OS_TO(OPENJDK_TARGET,$host_os)
- PLATFORM_EXTRACT_VARS_FROM_CPU_TO(OPENJDK_TARGET,$host_cpu)
-
- PLATFORM_EXTRACT_VARS_FROM_OS_TO(OPENJDK_BUILD,$build_os)
- PLATFORM_EXTRACT_VARS_FROM_CPU_TO(OPENJDK_BUILD,$build_cpu)
-
- if test "x$OPENJDK_TARGET_OS" != xsolaris; then
- LEGACY_OPENJDK_TARGET_CPU3=""
- LEGACY_OPENJDK_BUILD_CPU3=""
- fi
-
- # On MacOSX and MacOSX only, we have a different name for the x64 CPU in ARCH (LEGACY_OPENJDK_TARGET_CPU1) ...
- if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$OPENJDK_TARGET_CPU" = xx64; then
- LEGACY_OPENJDK_TARGET_CPU1="x86_64"
- fi
-
- PLATFORM_SET_RELEASE_FILE_OS_VALUES
-])
-
-AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_OS_TO],
-[
- PLATFORM_EXTRACT_VARS_FROM_OS($2)
- $1_OS="$VAR_OS"
- $1_OS_FAMILY="$VAR_OS_FAMILY"
- $1_OS_API="$VAR_OS_API"
-
- AC_SUBST($1_OS)
- AC_SUBST($1_OS_FAMILY)
- AC_SUBST($1_OS_API)
-
- if test "x$$1_OS_API" = xposix; then
- LEGACY_$1_OS_API="solaris"
- fi
- if test "x$$1_OS_API" = xwinapi; then
- LEGACY_$1_OS_API="windows"
- fi
- AC_SUBST(LEGACY_$1_OS_API)
-])
-
-AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_CPU_TO],
-[
- PLATFORM_EXTRACT_VARS_FROM_CPU($2)
- $1_CPU="$VAR_CPU"
- $1_CPU_ARCH="$VAR_CPU_ARCH"
- $1_CPU_BITS="$VAR_CPU_BITS"
- $1_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
- AC_SUBST($1_CPU)
- AC_SUBST($1_CPU_ARCH)
- AC_SUBST($1_CPU_BITS)
- AC_SUBST($1_CPU_ENDIAN)
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of ia32 and x64
- LEGACY_$1_CPU1="$VAR_LEGACY_CPU"
- AC_SUBST(LEGACY_$1_CPU1)
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of ia32 and x64.
- LEGACY_$1_CPU2="$LEGACY_$1_CPU1"
- if test "x$LEGACY_$1_CPU1" = xi586; then
- LEGACY_$1_CPU2=i386
- fi
- AC_SUBST(LEGACY_$1_CPU2)
-
- # And the third legacy naming of the cpu.
- # Ie only amd64 or sparcv9, used for the ISA_DIR on Solaris.
- LEGACY_$1_CPU3=""
- if test "x$$1_CPU" = xx64; then
- LEGACY_$1_CPU3=amd64
- fi
- if test "x$$1_CPU" = xsparcv9; then
- LEGACY_$1_CPU3=sparcv9
- fi
- AC_SUBST(LEGACY_$1_CPU3)
-])
-
+# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
+# Converts autoconf style CPU name to OpenJDK style, into
+# VAR_CPU, VAR_CPU_ARCH, VAR_CPU_BITS and VAR_CPU_ENDIAN.
AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_CPU],
[
# First argument is the cpu name from the trip/quad
case "$1" in
x86_64)
- VAR_CPU=x64
+ VAR_CPU=x86_64
VAR_CPU_ARCH=x86
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=amd64
;;
i?86)
- VAR_CPU=ia32
+ VAR_CPU=x86
VAR_CPU_ARCH=x86
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=i586
- ;;
- alpha*)
- VAR_CPU=alpha
- VAR_CPU_ARCH=alpha
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=alpha
;;
arm*)
VAR_CPU=arm
VAR_CPU_ARCH=arm
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=little
- VAR_LEGACY_CPU=arm
;;
- mips)
- VAR_CPU=mips
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mips
- ;;
- mipsel)
- VAR_CPU=mipsel
- VAR_CPU_ARCH=mips
- VAR_CPU_BITS=woot
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=mipsel
- ;;
powerpc)
VAR_CPU=ppc
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc
;;
powerpc64)
VAR_CPU=ppc64
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=ppc64
;;
sparc)
VAR_CPU=sparc
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparc
;;
- sparc64)
+ sparcv9)
VAR_CPU=sparcv9
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- VAR_LEGACY_CPU=sparcv9
- ;;
- s390)
- VAR_CPU=s390
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=32
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390
- VAR_LEGACY_CPU=s390
- ;;
- s390x)
- VAR_CPU=s390x
- VAR_CPU_ARCH=s390
- VAR_CPU_BITS=64
- VAR_CPU_ENDIAN=woot
- VAR_LEGACY_CPU=s390x
;;
*)
AC_MSG_ERROR([unsupported cpu $1])
;;
esac
-
- # Workaround cygwin not knowing about 64 bit.
- if test "x$VAR_OS" = "xwindows"; then
- if test "x$PROCESSOR_IDENTIFIER" != "x"; then
- PROC_ARCH=`echo $PROCESSOR_IDENTIFIER | $CUT -f1 -d' '`
- case "$PROC_ARCH" in
- intel64|Intel64|INTEL64|em64t|EM64T|amd64|AMD64|8664|x86_64)
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- ;;
- esac
- fi
- fi
-
- # on solaris x86...default seems to be 32-bit
- if test "x$VAR_OS" = "xsolaris" && \
- test "x$with_target_bits" = "x" && \
- test "x$VAR_CPU_ARCH" = "xx86"
- then
- with_target_bits=32
- fi
-
- if test "x$VAR_CPU_ARCH" = "xx86"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=x64
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=amd64
- fi
- if test "x$with_target_bits" = "x32"; then
- VAR_CPU=ia32
- VAR_CPU_BITS=32
- VAR_LEGACY_CPU=i586
- fi
- fi
-
- if test "x$VAR_CPU_ARCH" = "xsparc"; then
- if test "x$with_target_bits" = "x64"; then
- VAR_CPU=sparcv9
- VAR_CPU_BITS=64
- VAR_LEGACY_CPU=sparcv9
- fi
- fi
])
+# Support macro for PLATFORM_EXTRACT_TARGET_AND_BUILD.
+# Converts autoconf style OS name to OpenJDK style, into
+# VAR_OS and VAR_OS_API.
AC_DEFUN([PLATFORM_EXTRACT_VARS_FROM_OS],
[
case "$1" in
*linux*)
VAR_OS=linux
VAR_OS_API=posix
- VAR_OS_FAMILY=gnu
;;
*solaris*)
VAR_OS=solaris
VAR_OS_API=posix
- VAR_OS_FAMILY=sysv
;;
*darwin*)
VAR_OS=macosx
VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
;;
*bsd*)
VAR_OS=bsd
VAR_OS_API=posix
- VAR_OS_FAMILY=bsd
;;
*cygwin*|*windows*)
VAR_OS=windows
VAR_OS_API=winapi
- VAR_OS_FAMILY=windows
;;
*)
AC_MSG_ERROR([unsupported operating system $1])
@@ -303,6 +110,208 @@
esac
])
+# Expects $host_os $host_cpu $build_os and $build_cpu
+# and $with_target_bits to have been setup!
+#
+# Translate the standard triplet(quadruplet) definition
+# of the target/build system into OPENJDK_TARGET_OS, OPENJDK_TARGET_CPU,
+# OPENJDK_BUILD_OS, etc.
+AC_DEFUN([PLATFORM_EXTRACT_TARGET_AND_BUILD],
+[
+ # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
+ # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
+ # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
+ # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
+ OPENJDK_TARGET_AUTOCONF_NAME="$host"
+ OPENJDK_BUILD_AUTOCONF_NAME="$build"
+ AC_SUBST(OPENJDK_TARGET_AUTOCONF_NAME)
+ AC_SUBST(OPENJDK_BUILD_AUTOCONF_NAME)
+
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ PLATFORM_EXTRACT_VARS_FROM_OS($host_os)
+ PLATFORM_EXTRACT_VARS_FROM_CPU($host_cpu)
+ # ... and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_TARGET_OS="$VAR_OS"
+ OPENJDK_TARGET_OS_API="$VAR_OS_API"
+ OPENJDK_TARGET_CPU="$VAR_CPU"
+ OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+ AC_SUBST(OPENJDK_TARGET_OS)
+ AC_SUBST(OPENJDK_TARGET_OS_API)
+ AC_SUBST(OPENJDK_TARGET_CPU)
+ AC_SUBST(OPENJDK_TARGET_CPU_ARCH)
+ AC_SUBST(OPENJDK_TARGET_CPU_BITS)
+ AC_SUBST(OPENJDK_TARGET_CPU_ENDIAN)
+
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ PLATFORM_EXTRACT_VARS_FROM_OS($build_os)
+ PLATFORM_EXTRACT_VARS_FROM_CPU($build_cpu)
+ # ..and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_BUILD_OS="$VAR_OS"
+ OPENJDK_BUILD_OS_API="$VAR_OS_API"
+ OPENJDK_BUILD_CPU="$VAR_CPU"
+ OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+ AC_SUBST(OPENJDK_BUILD_OS)
+ AC_SUBST(OPENJDK_BUILD_OS_API)
+ AC_SUBST(OPENJDK_BUILD_CPU)
+ AC_SUBST(OPENJDK_BUILD_CPU_ARCH)
+ AC_SUBST(OPENJDK_BUILD_CPU_BITS)
+ AC_SUBST(OPENJDK_BUILD_CPU_ENDIAN)
+])
+
+# Check if a reduced build (32-bit on 64-bit platforms) is requested, and modify behaviour
+# accordingly. Must be done after setting up build and target system, but before
+# doing anything else with these values.
+AC_DEFUN([PLATFORM_SETUP_TARGET_CPU_BITS],
+[
+ AC_ARG_WITH(target-bits, [AS_HELP_STRING([--with-target-bits],
+ [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-target-bits=32 @<:@guessed@:>@])])
+
+ # We have three types of compiles:
+ # native == normal compilation, target system == build system
+ # cross == traditional cross compilation, target system != build system; special toolchain needed
+ # reduced == using native compilers, but with special flags (e.g. -m32) to produce 32-bit builds on 64-bit machines
+ #
+ if test "x$OPENJDK_BUILD_AUTOCONF_NAME" != "x$OPENJDK_TARGET_AUTOCONF_NAME"; then
+ # We're doing a proper cross-compilation
+ COMPILE_TYPE="cross"
+ else
+ COMPILE_TYPE="native"
+ fi
+
+ if test "x$with_target_bits" != x; then
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ AC_MSG_ERROR([It is not possible to combine --with-target-bits=X and proper cross-compilation. Choose either.])
+ fi
+
+ if test "x$with_target_bits" = x32 && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ # A reduced build is requested
+ COMPILE_TYPE="reduced"
+ OPENJDK_TARGET_CPU_BITS=32
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = "xx86"; then
+ OPENJDK_TARGET_CPU=x86
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = "xsparc"; then
+ OPENJDK_TARGET_CPU=sparc
+ else
+ AC_MSG_ERROR([Reduced build (--with-target-bits=32) is only supported on x86_64 and sparcv9])
+ fi
+ elif test "x$with_target_bits" = x64 && test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ AC_MSG_ERROR([It is not possible to use --with-target-bits=64 on a 32 bit system. Use proper cross-compilation instead.])
+ elif test "x$with_target_bits" = "x$OPENJDK_TARGET_CPU_BITS"; then
+ AC_MSG_NOTICE([--with-target-bits are set to build platform address size; argument has no meaning])
+ else
+ AC_MSG_ERROR([--with-target-bits can only be 32 or 64, you specified $with_target_bits!])
+ fi
+ fi
+ AC_SUBST(COMPILE_TYPE)
+
+AC_MSG_CHECKING([for compilation type])
+AC_MSG_RESULT([$COMPILE_TYPE])
+])
+
+ # Setup the legacy variables, for controlling the old makefiles.
+ #
+AC_DEFUN([PLATFORM_SETUP_LEGACY_VARS],
+[
+ # Also store the legacy naming of the cpu.
+ # Ie i586 and amd64 instead of x86 and x86_64
+ OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY="i586"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except MacOSX replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_LEGACY="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LEGACY)
+
+ # And the second legacy naming of the cpu.
+ # Ie i386 and amd64 instead of x86 and x86_64.
+ OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
+ elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LEGACY_LIB)
+
+ # This is the name of the cpu (but using i386 and amd64 instead of
+ # x86 and x86_64, respectively), preceeded by a /, to be used when
+ # locating libraries. On macosx, it's empty, though.
+ OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ OPENJDK_TARGET_CPU_LIBDIR=""
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LIBDIR)
+
+ # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
+ # /amd64 or /sparcv9. This string is appended to some library paths, like this:
+ # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
+ OPENJDK_TARGET_CPU_ISADIR=""
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_ISADIR="/amd64"
+ elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
+ OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
+ fi
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_ISADIR)
+
+ # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
+ OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
+ # On linux only, we replace x86 with i386.
+ OPENJDK_TARGET_CPU_OSARCH="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_OSARCH="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_OSARCH)
+
+ OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_JLI="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_JLI="amd64"
+ fi
+ # Now setup the -D flags for building libjli.
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
+ fi
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_JLI_CFLAGS)
+
+ # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
+ if test "x$OPENJDK_TARGET_OS_API" = xposix; then
+ OPENJDK_TARGET_OS_API_DIR="solaris"
+ fi
+ if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
+ OPENJDK_TARGET_OS_API_DIR="windows"
+ fi
+ AC_SUBST(OPENJDK_TARGET_OS_API_DIR)
+
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ A_LP64="LP64:="
+ ADD_LP64="-D_LP64=1"
+ fi
+ AC_SUBST(LP64,$A_LP64)
+
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ # FIXME: ... or should this include reduced builds..?
+ DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
+ else
+ DEFINE_CROSS_COMPILE_ARCH=""
+ fi
+ AC_SUBST(DEFINE_CROSS_COMPILE_ARCH)
+])
+
AC_DEFUN([PLATFORM_SET_RELEASE_FILE_OS_VALUES],
[
if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
@@ -315,7 +324,11 @@
fi
if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
REQUIRED_OS_NAME=Windows
- REQUIRED_OS_VERSION=5.1
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
+ REQUIRED_OS_VERSION=5.2
+ else
+ REQUIRED_OS_VERSION=5.1
+ fi
fi
if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
REQUIRED_OS_NAME=Darwin
@@ -338,42 +351,10 @@
AC_CANONICAL_HOST
AC_CANONICAL_TARGET
-AC_ARG_WITH(target-bits, [AS_HELP_STRING([--with-target-bits],
- [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-target-bits=32 @<:@guessed@:>@])])
-
-if test "x$with_target_bits" != x && \
- test "x$with_target_bits" != x32 && \
- test "x$with_target_bits" != x64 ; then
- AC_MSG_ERROR([--with-target-bits can only be 32 or 64, you specified $with_target_bits!])
-fi
-# Translate the standard cpu-vendor-kernel-os quadruplets into
-# the new TARGET_.... and BUILD_... and the legacy names used by
-# the openjdk build.
-# It uses $host_os $host_cpu $build_os $build_cpu and $with_target_bits
-PLATFORM_EXTRACT_TARGET_AND_BUILD_AND_LEGACY_VARS
-
-# The LEGACY_OPENJDK_TARGET_CPU3 is the setting for ISA_DIR.
-if test "x$LEGACY_OPENJDK_TARGET_CPU3" != x; then
- LEGACY_OPENJDK_TARGET_CPU3="/${LEGACY_OPENJDK_TARGET_CPU3}"
-fi
-
-# Now the following vars are defined.
-# OPENJDK_TARGET_OS=aix,bsd,hpux,linux,macosx,solaris,windows
-# OPENJDK_TARGET_OS_FAMILY=bsd,gnu,sysv,win32,wince
-# OPENJDK_TARGET_OS_API=posix,winapi
-#
-# OPENJDK_TARGET_CPU=ia32,x64,sparc,sparcv9,arm,arm64,ppc,ppc64
-# OPENJDK_TARGET_CPU_ARCH=x86,sparc,pcc,arm
-# OPENJDK_TARGET_CPU_BITS=32,64
-# OPENJDK_TARGET_CPU_ENDIAN=big,little
-#
-# There is also a:
-# LEGACY_OPENJDK_TARGET_CPU1=i586,amd64,.... # used to set the old var ARCH
-# LEGACY_OPENJDK_TARGET_CPU2=i386,amd64,.... # used to set the old var LIBARCH
-# LEGACY_OPENJDK_TARGET_CPU3=only sparcv9,amd64 # used to set the ISA_DIR on Solaris
-# There was also a BUILDARCH that had i486,amd64,... but we do not use that
-# in the new build.
-# LEGACY_OPENJDK_TARGET_OS_API=solaris,windows # used to select source roots
+PLATFORM_EXTRACT_TARGET_AND_BUILD
+PLATFORM_SETUP_TARGET_CPU_BITS
+PLATFORM_SET_RELEASE_FILE_OS_VALUES
+PLATFORM_SETUP_LEGACY_VARS
])
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION],
@@ -391,7 +372,26 @@
AC_SUBST(OS_VERSION_MICRO)
])
-AC_DEFUN_ONCE([PLATFORM_TEST_OPENJDK_TARGET_BITS],
+# Support macro for PLATFORM_SETUP_OPENJDK_TARGET_BITS.
+# Add -mX to various FLAGS variables.
+AC_DEFUN([PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS],
+[
+ # keep track of c/cxx flags that we added outselves...
+ # to prevent emitting warning...
+ ADDED_CFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_CXXFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+ ADDED_LDFLAGS=" -m${OPENJDK_TARGET_CPU_BITS}"
+
+ CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
+ CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
+ LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
+
+ CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
+ LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
+])
+
+AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_BITS],
[
###############################################################################
#
@@ -399,72 +399,47 @@
# (The JVM can use 32 or 64 bit Java pointers but that decision
# is made at runtime.)
#
-AC_LANG_PUSH(C++)
-OLD_CXXFLAGS="$CXXFLAGS"
-if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then
- CXXFLAGS="-m${with_target_bits} $CXXFLAGS"
+if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Always specify -m flags on Solaris
+ PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS
+elif test "x$COMPILE_TYPE" = xreduced; then
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # Specify -m if running reduced on other Posix platforms
+ PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS
+ fi
fi
-AC_CHECK_SIZEOF([int *], [1111])
-CXXFLAGS="$OLD_CXXFLAGS"
-AC_LANG_POP(C++)
-
-# keep track of c/cxx flags that we added outselves...
-# to prevent emitting warning...
-ADDED_CFLAGS=
-ADDED_CXXFLAGS=
-ADDED_LDFLAGS=
-if test "x$ac_cv_sizeof_int_p" = x0; then
- # The test failed, lets pick the assumed value.
- ARCH_DATA_MODEL=$OPENJDK_TARGET_CPU_BITS
-else
- ARCH_DATA_MODEL=`expr 8 \* $ac_cv_sizeof_int_p`
+# Make compilation sanity check
+AC_CHECK_HEADERS([stdio.h], , [
+ AC_MSG_NOTICE([Failed to compile stdio.h. This likely implies missing compile dependencies.])
+ if test "x$COMPILE_TYPE" = xreduced; then
+ AC_MSG_NOTICE([You are doing a reduced build. Check that you have 32-bit libraries installed.])
+ elif test "x$COMPILE_TYPE" = xcross; then
+ AC_MSG_NOTICE([You are doing a cross-compilation. Check that you have all target platform libraries installed.])
+ fi
+ AC_MSG_ERROR([Cannot continue.])
+])
+
+AC_CHECK_SIZEOF([int *], [1111])
- if test "x$OPENJDK_TARGET_OS" != xwindows && test "x$with_target_bits" != x; then
- ADDED_CFLAGS=" -m${with_target_bits}"
- ADDED_CXXFLAGS=" -m${with_target_bits}"
- ADDED_LDFLAGS=" -m${with_target_bits}"
+if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
+ # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
+ SIZEOF_INT_P="$ac_cv_sizeof_int_p"
+fi
- CFLAGS="${CFLAGS}${ADDED_CFLAGS}"
- CXXFLAGS="${CXXFLAGS}${ADDED_CXXFLAGS}"
- LDFLAGS="${LDFLAGS}${ADDED_LDFLAGS}"
+if test "x$SIZEOF_INT_P" = x; then
+ # The test failed, lets stick to the assumed value.
+ AC_MSG_WARN([The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS.])
+else
+ TESTED_TARGET_CPU_BITS=`expr 8 \* $SIZEOF_INT_P`
- CFLAGS_JDK="${CFLAGS_JDK}${ADDED_CFLAGS}"
- CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
- LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
+ if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
+ AC_MSG_ERROR([The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)])
fi
fi
-if test "x$ARCH_DATA_MODEL" = x64; then
- A_LP64="LP64:="
- ADD_LP64="-D_LP64=1"
-fi
AC_MSG_CHECKING([for target address size])
-AC_MSG_RESULT([$ARCH_DATA_MODEL bits])
-AC_SUBST(LP64,$A_LP64)
-AC_SUBST(ARCH_DATA_MODEL)
-
-if test "x$ARCH_DATA_MODEL" != "x$OPENJDK_TARGET_CPU_BITS"; then
- AC_MSG_ERROR([The tested number of bits in the target ($ARCH_DATA_MODEL) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)])
-fi
-
-#
-# NOTE: check for -mstackrealign needs to be below potential addition of -m32
-#
-if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
- # While waiting for a better solution, the current workaround is to use -mstackrealign.
- CFLAGS="$CFLAGS -mstackrealign"
- AC_MSG_CHECKING([if 32-bit compiler supports -mstackrealign])
- AC_LINK_IFELSE([AC_LANG_SOURCE([[int main() { return 0; }]])],
- [
- AC_MSG_RESULT([yes])
- ],
- [
- AC_MSG_RESULT([no])
- AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.])
- ])
-fi
+AC_MSG_RESULT([$OPENJDK_TARGET_CPU_BITS bits])
])
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_ENDIANNESS],
@@ -478,21 +453,7 @@
if test "x$ENDIAN" = xuniversal_endianness; then
AC_MSG_ERROR([Building with both big and little endianness is not supported])
fi
-if test "x$ENDIAN" = xunknown; then
- ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN"
+if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
+ AC_MSG_ERROR([The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)])
fi
-if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
- AC_MSG_WARN([The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)])
- ENDIAN="$OPENJDK_TARGET_CPU_ENDIAN"
-fi
-AC_SUBST(ENDIAN)
])
-
-AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_ISADIR],
-[
-###############################################################################
-#
-# Could someone enlighten this configure script with a comment about libCrun?
-#
-#
-])
--- a/common/autoconf/source-dirs.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/source-dirs.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -250,31 +250,8 @@
AC_DEFUN_ONCE([SRCDIRS_SETUP_OUTPUT_DIRS],
[
-LANGTOOLS_OUTPUTDIR="$OUTPUT_ROOT/langtools"
-CORBA_OUTPUTDIR="$OUTPUT_ROOT/corba"
-JAXP_OUTPUTDIR="$OUTPUT_ROOT/jaxp"
-JAXWS_OUTPUTDIR="$OUTPUT_ROOT/jaxws"
-HOTSPOT_OUTPUTDIR="$OUTPUT_ROOT/hotspot"
-JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
-IMAGES_OUTPUTDIR="$OUTPUT_ROOT/images"
+BUILD_OUTPUT="$OUTPUT_ROOT"
+AC_SUBST(BUILD_OUTPUT)
-AC_SUBST(LANGTOOLS_OUTPUTDIR)
-AC_SUBST(CORBA_OUTPUTDIR)
-AC_SUBST(JAXP_OUTPUTDIR)
-AC_SUBST(JAXWS_OUTPUTDIR)
-AC_SUBST(HOTSPOT_OUTPUTDIR)
-AC_SUBST(JDK_OUTPUTDIR)
-AC_SUBST(IMAGES_OUTPUTDIR)
-
-LANGTOOLS_DIST="$OUTPUT_ROOT/langtools/dist"
-CORBA_DIST="$OUTPUT_ROOT/corba/dist"
-JAXP_DIST="$OUTPUT_ROOT/jaxp/dist"
-JAXWS_DIST="$OUTPUT_ROOT/jaxws/dist"
-HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
-
-AC_SUBST(LANGTOOLS_DIST)
-AC_SUBST(CORBA_DIST)
-AC_SUBST(JAXP_DIST)
-AC_SUBST(JAXWS_DIST)
-AC_SUBST(HOTSPOT_DIST)
+JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
])
--- a/common/autoconf/spec.gmk.in Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/spec.gmk.in Wed Jul 05 18:22:52 2017 +0200
@@ -23,7 +23,11 @@
# questions.
#
-# Configured @DATE_WHEN_CONFIGURED@ to build for a @OPENJDK_TARGET_SYSTEM@ system,
+# Configured @DATE_WHEN_CONFIGURED@ to build
+# for target system @OPENJDK_TARGET_OS@-@OPENJDK_TARGET_CPU@
+# (called @OPENJDK_TARGET_AUTOCONF_NAME@ by autoconf)
+# on build system @OPENJDK_BUILD_OS@-@OPENJDK_BUILD_CPU@
+# (called @OPENJDK_BUILD_AUTOCONF_NAME@ by autoconf)
# using 'configure @CONFIGURE_COMMAND_LINE@'
# When calling macros, the spaces between arguments are
@@ -40,6 +44,17 @@
define NEWLINE:=
endef
+# A self-referential reference to this file.
+SPEC:=@SPEC@
+
+# Specify where the spec file is.
+MAKE_ARGS="SPEC=$(SPEC)"
+
+# TODO The logic for finding and setting MAKE is currently not working
+# well on windows. Disable it TEMPORARILY there for now.
+ifneq (@OPENJDK_TARGET_OS@,windows)
+ MAKE:=@MAKE@
+endif
# Pass along the verbosity setting.
ifeq (,$(findstring VERBOSE=,$(MAKE)))
@@ -51,27 +66,16 @@
MAKE:=$(MAKE) -R
endif
-# Specify where the spec file is.
-ifeq (,$(findstring SPEC=,$(MAKE)))
- MAKE:=$(MAKE) SPEC=@SPEC@
-endif
-
# Specify where the common include directory for makefiles is.
ifeq (,$(findstring -I @SRC_ROOT@/common/makefiles,$(MAKE)))
MAKE:=$(MAKE) -I @SRC_ROOT@/common/makefiles
endif
-# A self-referential reference to this file.
-SPEC:=@SPEC@
-
# The "human readable" name of this configuration
CONF_NAME:=@CONF_NAME@
# The built jdk will run in this target system.
-OPENJDK_TARGET_SYSTEM:=@OPENJDK_TARGET_SYSTEM@
-
OPENJDK_TARGET_OS:=@OPENJDK_TARGET_OS@
-OPENJDK_TARGET_OS_FAMILY:=@OPENJDK_TARGET_OS_FAMILY@
OPENJDK_TARGET_OS_API:=@OPENJDK_TARGET_OS_API@
OPENJDK_TARGET_CPU:=@OPENJDK_TARGET_CPU@
@@ -79,12 +83,20 @@
OPENJDK_TARGET_CPU_BITS:=@OPENJDK_TARGET_CPU_BITS@
OPENJDK_TARGET_CPU_ENDIAN:=@OPENJDK_TARGET_CPU_ENDIAN@
+COMPILE_TYPE:=@COMPILE_TYPE@
+
+# Legacy support
+OPENJDK_TARGET_CPU_ISADIR:=@OPENJDK_TARGET_CPU_ISADIR@
+OPENJDK_TARGET_CPU_LIBDIR:=@OPENJDK_TARGET_CPU_LIBDIR@
+OPENJDK_TARGET_CPU_LEGACY:=@OPENJDK_TARGET_CPU_LEGACY@
+OPENJDK_TARGET_CPU_LEGACY_LIB:=@OPENJDK_TARGET_CPU_LEGACY_LIB@
+OPENJDK_TARGET_CPU_OSARCH:=@OPENJDK_TARGET_CPU_OSARCH@
+OPENJDK_TARGET_CPU_JLI_CFLAGS:=@OPENJDK_TARGET_CPU_JLI_CFLAGS@
+OPENJDK_TARGET_OS_API_DIR:=@OPENJDK_TARGET_OS_API_DIR@
+
# We are building on this build system.
# When not cross-compiling, it is the same as the target.
-OPENJDK_BUILD_SYSTEM:=@OPENJDK_BUILD_SYSTEM@
-
OPENJDK_BUILD_OS:=@OPENJDK_BUILD_OS@
-OPENJDK_BUILD_OS_FAMILY:=@OPENJDK_BUILD_OS_FAMILY@
OPENJDK_BUILD_OS_API:=@OPENJDK_BUILD_OS_API@
OPENJDK_BUILD_CPU:=@OPENJDK_BUILD_CPU@
@@ -96,21 +108,6 @@
REQUIRED_OS_NAME:=@REQUIRED_OS_NAME@
REQUIRED_OS_VERSION:=@REQUIRED_OS_VERSION@
-# Old name for OPENJDK_TARGET_OS (aix,bsd,hpux,linux,macosx,solaris,windows etc)
-PLATFORM:=@OPENJDK_TARGET_OS@
-# Old name for OPENJDK_TARGET_CPU, uses i586 and amd64, instead of ia32 and x64.
-ARCH:=@LEGACY_OPENJDK_TARGET_CPU1@
-# Yet another name for arch used for an extra subdir below the jvm lib.
-# Uses i386 and amd64, instead of ia32 and x64.
-LIBARCH:=@LEGACY_OPENJDK_TARGET_CPU2@
-# Use to switch between solaris and windows subdirs in the jdk.
-LEGACY_OPENJDK_TARGET_OS_API:=@LEGACY_OPENJDK_TARGET_OS_API@
-# 32 or 64 bit
-ARCH_DATA_MODEL:=@OPENJDK_TARGET_CPU_BITS@
-# Legacy setting for building for a 64 bit machine.
-# If yes then this expands to _LP64:=1
-@LP64@
-ENDIAN:=@OPENJDK_TARGET_CPU_ENDIAN@
@SET_OPENJDK@
JIGSAW:=@JIGSAW@
LIBM:=-lm
@@ -143,6 +140,9 @@
HOTSPOT_TOPDIR:=@HOTSPOT_TOPDIR@
COPYRIGHT_YEAR:=@COPYRIGHT_YEAR@
+# Location where build customization files may be found
+CUSTOM_MAKE_DIR:=@CUSTOM_MAKE_DIR@
+
# Information gathered from the version.numbers file.
JDK_MAJOR_VERSION:=@JDK_MAJOR_VERSION@
JDK_MINOR_VERSION:=@JDK_MINOR_VERSION@
@@ -171,17 +171,12 @@
# The JDK variant is a name for a specific set of modules to be compiled for the JDK.
JDK_VARIANT:=@JDK_VARIANT@
-# Legacy defines controlling the JDK variant embedded.
-@JAVASE_EMBEDDED@
-@MINIMIZE_RAM_USAGE@
-
# Should we compile support for running with a graphical UI? (ie headful)
# Should we compile support for running without? (ie headless)
SUPPORT_HEADFUL:=@SUPPORT_HEADFUL@
SUPPORT_HEADLESS:=@SUPPORT_HEADLESS@
# Legacy defines controlled by the SUPPORT_HEADLESS and SUPPORT_HEADFUL options.
@BUILD_HEADLESS@
-@BUILD_HEADLESS_ONLY@
# These are the libjvms that we want to build.
# The java launcher uses the default.
@@ -194,53 +189,43 @@
JVM_VARIANT_ZERO:=@JVM_VARIANT_ZERO@
JVM_VARIANT_ZEROSHARK:=@JVM_VARIANT_ZEROSHARK@
-# Legacy setting: OPT or DBG
-VARIANT:=@VARIANT@
-# Legacy setting: true or false
-FASTDEBUG:=@FASTDEBUG@
-# Legacy setting: debugging the class files?
-DEBUG_CLASSFILES:=@DEBUG_CLASSFILES@
+# Universal binaries on macosx
+MACOSX_UNIVERSAL=@MACOSX_UNIVERSAL@
+
# Legacy setting: -debug or -fastdebug
+# Still used in version string...
BUILD_VARIANT_RELEASE:=@BUILD_VARIANT_RELEASE@
-LANGTOOLS_OUTPUTDIR:=@LANGTOOLS_OUTPUTDIR@
-CORBA_OUTPUTDIR:=@CORBA_OUTPUTDIR@
-JAXP_OUTPUTDIR:=@JAXP_OUTPUTDIR@
-JAXWS_OUTPUTDIR:=@JAXWS_OUTPUTDIR@
-HOTSPOT_OUTPUTDIR:=@HOTSPOT_OUTPUTDIR@
-
-# This where a working jvm is built.
+# JDK_OUTPUTDIR specifies where a working jvm is built.
# You can run $(JDK_OUTPUTDIR)/bin/java
# Though the layout of the contents of $(JDK_OUTPUTDIR) is not
# yet the same as a default installation.
-JDK_OUTPUTDIR:=@OUTPUT_ROOT@/jdk
-
+#
# When you run "make install" it will create the standardized
-# layout for the jdk and the jre inside the images subdir.
+# layout for the jdk and the jre inside the IMAGES_OUTPUTDIR subdir.
# Then it will copy the contents of the jdk into the installation
# directory.
-IMAGES_OUTPUTDIR:=@OUTPUT_ROOT@/images
-
-LANGTOOLS_DIST:=@LANGTOOLS_DIST@
-CORBA_DIST:=@CORBA_DIST@
-JAXP_DIST:=@JAXP_DIST@
-JAXWS_DIST:=@JAXWS_DIST@
-HOTSPOT_DIST:=@HOTSPOT_DIST@
-# Legacy variables used by Release.gmk
-JDK_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2sdk-image
-JRE_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2re-image
+BUILD_OUTPUT:=@BUILD_OUTPUT@
+LANGTOOLS_OUTPUTDIR=$(BUILD_OUTPUT)/langtools
+CORBA_OUTPUTDIR=$(BUILD_OUTPUT)/corba
+JAXP_OUTPUTDIR=$(BUILD_OUTPUT)/jaxp
+JAXWS_OUTPUTDIR=$(BUILD_OUTPUT)/jaxws
+HOTSPOT_OUTPUTDIR=$(BUILD_OUTPUT)/hotspot
+JDK_OUTPUTDIR=$(BUILD_OUTPUT)/jdk
+IMAGES_OUTPUTDIR=$(BUILD_OUTPUT)/images
-# Can be /sparcv9 or /amd64 on Solaris
-ISA_DIR:=@LEGACY_OPENJDK_TARGET_CPU3@
-BINDIR:=$(JDK_OUTPUTDIR)/bin$(ISA_DIR)
+LANGTOOLS_DIST=$(LANGTOOLS_OUTPUTDIR)/dist
+CORBA_DIST=$(CORBA_OUTPUTDIR)/dist
+JAXP_DIST=$(JAXP_OUTPUTDIR)/dist
+JAXWS_DIST=$(JAXWS_OUTPUTDIR)/dist
+HOTSPOT_DIST=$(HOTSPOT_OUTPUTDIR)/dist
# The boot jdk to use
-ALT_BOOTDIR:=@BOOT_JDK@
BOOT_JDK:=@BOOT_JDK@
BOOT_JDK_JVMARGS:=@BOOT_JDK_JVMARGS@
BOOT_RTJAR:=@BOOT_RTJAR@
-BOOT_TOOLSJAR:=@BOOT_TOOLSJAR@
+BOOT_TOOLSJAR=$(BOOT_JDK)/lib/tools.jar
# When compiling Java source to be run by the boot jdk
# use these extra flags, eg -source 6 -target 6
@@ -248,30 +233,18 @@
# Information about the build system
NUM_CORES:=@NUM_CORES@
-# This is used from the jdk build for C/C++ code.
-PARALLEL_COMPILE_JOBS:=@CONCURRENT_BUILD_JOBS@
-# Store javac server synchronization files here, and
-# the javac server log files.
-JAVAC_SERVERS:=@JAVAC_SERVERS@
-# Should we use a javac server or not? The javac server gives
-# an enormous performance improvement since it reduces the
-# startup costs of javac and reuses as much as possible of intermediate
-# compilation work. But if we want to compile with a non-Java
-# javac compiler, like gcj. Then we cannot use javac server and
-# this variable is set to false.
-JAVAC_USE_REMOTE:=@JAVAC_USE_REMOTE@
+# Enable sjavac support = use a javac server,
+# multi core javac compilation and dependency tracking.
+ENABLE_SJAVAC:=@ENABLE_SJAVAC@
+# Store sjavac server synchronization files here, and
+# the sjavac server log files.
+SJAVAC_SERVER_DIR:=@SJAVAC_SERVER_DIR@
# We can block the Javac server to never use more cores than this.
# This is not for performance reasons, but for memory usage, since each
# core requires its own JavaCompiler. We might have 64 cores and 4GB
# of memory, 64 JavaCompilers will currently not fit in a 3GB heap.
# Since there is no sharing of data between the JavaCompilers.
-JAVAC_SERVER_CORES:=@JAVAC_SERVER_CORES@
-# Should we use dependency tracking between Java packages? true or false.
-JAVAC_USE_DEPS:=@JAVAC_USE_DEPS@
-# We can invoke javac: SINGLE_THREADED_BATCH or MULTI_CORE_CONCURRENT
-JAVAC_USE_MODE:=@JAVAC_USE_MODE@
-# Enable not yet complete sjavac support.
-ENABLE_SJAVAC:=@ENABLE_SJAVAC@
+SJAVAC_SERVER_CORES:=@SJAVAC_SERVER_CORES@
# The OpenJDK makefiles should be changed to using the standard
# configure output ..._CFLAGS and ..._LIBS. In the meantime we
@@ -280,7 +253,6 @@
FREETYPE2_LIBS:=@FREETYPE2_LIBS@
FREETYPE2_CFLAGS:=@FREETYPE2_CFLAGS@
USING_SYSTEM_FT_LIB=@USING_SYSTEM_FT_LIB@
-ALT_CUPS_HEADERS_PATH:=$(patsubst -I%,%,$(filter -I%,@CUPS_CFLAGS@))
CUPS_CFLAGS:=@CUPS_CFLAGS@
PACKAGE_PATH=@PACKAGE_PATH@
@@ -288,8 +260,6 @@
# Source file for cacerts
CACERTS_FILE=@CACERTS_FILE@
-#MOZILLA_HEADERS_PATH:=
-
# Necessary additional compiler flags to compile X11
X_CFLAGS:=@X_CFLAGS@
X_LIBS:=@X_LIBS@
@@ -338,7 +308,7 @@
CPP:=@UNCYGDRIVE@ @CPP@
#CPPFLAGS:=@CPPFLAGS@
-# The linker can be gcc or ld on posix systems, or link.exe on winapi systems.
+# The linker can be gcc or ld on posix systems, or link.exe on windows systems.
LD:=@UNCYGDRIVE@ @LD@
# LDFLAGS used to link the jdk native libraries (C-code)
@@ -353,6 +323,9 @@
LDFLAGS_JDKEXE:=@LDFLAGS_JDKEXE@
LDFLAGS_JDKEXE_SUFFIX:=@LDFLAGS_JDKEXE_SUFFIX@
+# LDFLAGS specific to C++ linking.
+LDFLAGS_CXX_JDK:=@LDFLAGS_CXX_JDK@
+
# Sometimes a different linker is needed for c++ libs
LDCXX:=@UNCYGDRIVE@ @LDCXX@
# The flags for linking libstdc++ linker.
@@ -361,28 +334,22 @@
# Sometimes a different linker is needed for c++ executables
LDEXECXX:=@UNCYGDRIVE@ @LDEXECXX@
-# If cross compiling, then define CROSS_COMPILE_ARCH:=cpu_name here.
-@DEFINE_CROSS_COMPILE_ARCH@
-# The HOSTCC should really be named BUILDCC, ie build executable for
-# the build platform. Same as CC when not cross compiling.
-HOSTCC:=@UNCYGDRIVE@ @HOSTCC@
-HOSTCXX:=@UNCYGDRIVE@ @HOSTCXX@
-# And of course, the jdk spells HOSTCC as NIO_CC/HOST_CC
-HOST_CC:=@UNCYGDRIVE@ @HOSTCC@
-NIO_CC:=@UNCYGDRIVE@ @HOSTCC@
-
-HOST_LD:=@UNCYGDRIVE@ @HOSTLD@
+# BUILD_CC/BUILD_LD is a compiler/linker that generates code that is runnable on the
+# build platform.
+BUILD_CC:=@UNCYGDRIVE@ @BUILD_CC@
+BUILD_LD:=@UNCYGDRIVE@ @BUILD_LD@
AS:=@UNCYGDRIVE@ @AS@
-ASFLAGS:=@ASFLAGS@
-# AR is used to create a static library (is ar in posix, lib.exe in winapi)
+# AR is used to create a static library (is ar in posix, lib.exe in windows)
AR:=@UNCYGDRIVE@ @AR@
ARFLAGS:=@ARFLAGS@
-NM:=@UNCYGDRIVE@ @NM@
-STRIP:=@UNCYGDRIVE@ @STRIP@
-MCS:=@UNCYGDRIVE@ @MCS@
+NM:=@NM@
+STRIP:=@STRIP@
+MCS:=@MCS@
+
+LIPO:=@LIPO@
# Command to create a shared library
SHARED_LIBRARY_FLAGS:=@SHARED_LIBRARY_FLAGS@
@@ -414,6 +381,7 @@
# Set origin using the linker, ie use the relative path to the dependent library to find the dependees.
# (Note absence of := assignment, because we do not want to evaluate the macro body here)
SET_SHARED_LIBRARY_ORIGIN=@SET_SHARED_LIBRARY_ORIGIN@
+SET_EXECUTABLE_ORIGIN=@SET_EXECUTABLE_ORIGIN@
# Different OS:es have different ways of naming shared libraries.
# The SHARED_LIBRARY macro takes "verify" as and argument and returns:
@@ -432,21 +400,20 @@
JAVA_FLAGS:=@BOOT_JDK_JVMARGS@
-JAVA=@UNCYGDRIVE@ @JAVA@ $(JAVA_FLAGS)
+JAVA=@UNCYGDRIVE@ $(BOOT_JDK)/bin/java $(JAVA_FLAGS)
-JAVAC:=@UNCYGDRIVE@ @JAVAC@
-JAVAC_FLAGS:=@JAVAC_FLAGS@
-
-JAVAH:=@UNCYGDRIVE@ @JAVAH@
+JAVAC=@UNCYGDRIVE@ $(BOOT_JDK)/bin/javac
+# Hotspot sets this variable before reading the SPEC when compiling sa-jdi.jar. Avoid
+# overriding that value by using ?=.
+JAVAC_FLAGS?=@JAVAC_FLAGS@
-JAR:=@UNCYGDRIVE@ @JAR@
+JAVAH=@UNCYGDRIVE@ $(BOOT_JDK)/bin/javah
-RMIC:=@UNCYGDRIVE@ @RMIC@
+JAR=@UNCYGDRIVE@ $(BOOT_JDK)/bin/jar
-NATIVE2ASCII:=@UNCYGDRIVE@ @NATIVE2ASCII@
+RMIC=@UNCYGDRIVE@ $(BOOT_JDK)/bin/rmic
-BOOT_JAR_CMD:=@UNCYGDRIVE@ @JAR@
-BOOT_JAR_JFLAGS:=
+NATIVE2ASCII=@UNCYGDRIVE@ $(BOOT_JDK)/bin/native2ascii
# Base flags for RC
# Guarding this against resetting value. Legacy make files include spec multiple
@@ -456,11 +423,12 @@
endif
# A specific java binary with specific options can be used to run
-# the long running background javac server and other long running tasks.
-SERVER_JAVA:=@UNCYGDRIVE@ @SERVER_JAVA@
+# the long running background sjavac servers and other long running tasks.
+SJAVAC_SERVER_JAVA:=@UNCYGDRIVE@ @SJAVAC_SERVER_JAVA@
# Tools adhering to a minimal and common standard of posix compliance.
AWK:=@AWK@
+BASENAME:=@BASENAME@
CAT:=@CAT@
CCACHE:=@CCACHE@
# CD is going away, but remains to cater for legacy makefiles.
@@ -520,8 +488,6 @@
BUILD_LOG_WRAPPER:=@BUILD_LOG_WRAPPER@
# Build setup
-ENABLE_DOCS:=@ENABLE_DOCS@
-GENERATE_DOCS:=@ENABLE_DOCS@
DISABLE_NIMBUS:=@DISABLE_NIMBUS@
ENABLE_JFR=@ENABLE_JFR@
USE_EXTERNAL_LIBJPEG:=@USE_EXTERNAL_LIBJPEG@
@@ -561,17 +527,6 @@
####################################################
#
-# Legacy Hotspot support
-
-HOTSPOT_DIST:=@HOTSPOT_DIST@
-HOTSPOT_MAKE_ARGS:=@HOTSPOT_MAKE_ARGS@
-# This is used from the libjvm build for C/C++ code.
-HOTSPOT_BUILD_JOBS:=@CONCURRENT_BUILD_JOBS@
-# Control wether Hotspot runs Queens test after building
-TEST_IN_BUILD=@TEST_IN_BUILD@
-
-####################################################
-#
# INSTALLATION
#
@@ -634,5 +589,5 @@
OS_VERSION_MINOR:=@OS_VERSION_MINOR@
OS_VERSION_MICRO:=@OS_VERSION_MICRO@
-# Include the closed-spec.gmk file if it exists
--include $(dir @SPEC@)/closed-spec.gmk
+# Include the custom-spec.gmk file if it exists
+-include $(dir @SPEC@)/custom-spec.gmk
--- a/common/autoconf/spec.sh.in Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/spec.sh.in Wed Jul 05 18:22:52 2017 +0200
@@ -23,505 +23,14 @@
# questions.
#
-# Configured"@DATE_WHEN_CONFIGURED@ to build for a @OPENJDK_TARGET_SYSTEM@ system,
-# using 'configure @CONFIGURE_COMMAND_LINE@'
-
-# The "human readable" name of this configuration
-CONF_NAME="@CONF_NAME@"
-
-# The built jdk will run in this target system.
-OPENJDK_TARGET_SYSTEM="@OPENJDK_TARGET_SYSTEM@"
-
-OPENJDK_TARGET_OS="@OPENJDK_TARGET_OS@"
-OPENJDK_TARGET_OS_FAMILY="@OPENJDK_TARGET_OS_FAMILY@"
-OPENJDK_TARGET_OS_API="@OPENJDK_TARGET_OS_API@"
-
-OPENJDK_TARGET_CPU="@OPENJDK_TARGET_CPU@"
-OPENJDK_TARGET_CPU_ARCH="@OPENJDK_TARGET_CPU_ARCH@"
-OPENJDK_TARGET_CPU_BITS="@OPENJDK_TARGET_CPU_BITS@"
-OPENJDK_TARGET_CPU_ENDIAN="@OPENJDK_TARGET_CPU_ENDIAN@"
-
-# We are building on this build system.
-# When not cross-compiling, it is the same as the target.
-OPENJDK_BUILD_SYSTEM="@OPENJDK_BUILD_SYSTEM@"
-
-OPENJDK_BUILD_OS="@OPENJDK_BUILD_OS@"
-OPENJDK_BUILD_OS_FAMILY="@OPENJDK_BUILD_OS_FAMILY@"
-OPENJDK_BUILD_OS_API="@OPENJDK_BUILD_OS_API@"
-
-OPENJDK_BUILD_CPU="@OPENJDK_BUILD_CPU@"
-OPENJDK_BUILD_CPU_ARCH="@OPENJDK_BUILD_CPU_ARCH@"
-OPENJDK_BUILD_CPU_BITS="@OPENJDK_BUILD_CPU_BITS@"
-OPENJDK_BUILD_CPU_ENDIAN="@OPENJDK_BUILD_CPU_ENDIAN@"
-
-# Legacy OS values for use in release file.
-REQUIRED_OS_NAME="@REQUIRED_OS_NAME@"
-REQUIRED_OS_VERSION="@REQUIRED_OS_VERSION@"
-
-# Old name for OPENJDK_TARGET_OS (aix,bsd,hpux,linux,macosx,solaris,windows etc)
-PLATFORM="@OPENJDK_TARGET_OS@"
-# Old name for OPENJDK_TARGET_CPU, uses i586 and amd64, instead of ia32 and x64.
-ARCH="@LEGACY_OPENJDK_TARGET_CPU1@"
-# Yet another name for arch used for an extra subdir below the jvm lib.
-# Uses i386 and amd64, instead of ia32 and x64.
-LIBARCH="@LEGACY_OPENJDK_TARGET_CPU2@"
-# Use to switch between solaris and windows subdirs in the jdk.
-LEGACY_OPENJDK_TARGET_OS_API="@LEGACY_OPENJDK_TARGET_OS_API@"
-# 32 or 64 bit
-ARCH_DATA_MODEL="@OPENJDK_TARGET_CPU_BITS@"
-# Legacy setting for building for a 64 bit machine.
-# If yes then this expands to _LP64=1
-ENDIAN="@OPENJDK_TARGET_CPU_ENDIAN@"
-JIGSAW="@JIGSAW@"
-LIBM=-lm
-LIBDL="@LIBDL@"
-
-# colon or semicolon
-PATH_SEP="@PATH_SEP@"
-
-# The sys root where standard headers and libraries are found.
-# Usually not needed since the configure script should have
-# taken it into account already when setting CFLAGS et al.
-SYS_ROOT="@SYS_ROOT@"
-
-# Paths to the source code
-SRC_ROOT="@SRC_ROOT@"
-ADD_SRC_ROOT="@ADD_SRC_ROOT@"
-OVERRIDE_SRC_ROOT="@OVERRIDE_SRC_ROOT@"
-TOPDIR="@SRC_ROOT@"
-OUTPUT_ROOT="@OUTPUT_ROOT@"
-JDK_MAKE_SHARED_DIR="@JDK_TOPDIR@"/makefiles/common/shared
-JDK_TOPDIR="@JDK_TOPDIR@"
-LANGTOOLS_TOPDIR="@LANGTOOLS_TOPDIR@"
-CORBA_TOPDIR="@CORBA_TOPDIR@"
-JAXP_TOPDIR="@JAXP_TOPDIR@"
-JAXWS_TOPDIR="@JAXWS_TOPDIR@"
-HOTSPOT_TOPDIR="@HOTSPOT_TOPDIR@"
-COPYRIGHT_YEAR="@COPYRIGHT_YEAR@"
-
-# Information gathered from the version.numbers file.
-JDK_MAJOR_VERSION="@JDK_MAJOR_VERSION@"
-JDK_MINOR_VERSION="@JDK_MINOR_VERSION@"
-JDK_MICRO_VERSION="@JDK_MICRO_VERSION@"
-JDK_UPDATE_VERSION="@JDK_UPDATE_VERSION@"
-JDK_BUILD_NUMBER="@JDK_BUILD_NUMBER@"
-MILESTONE="@MILESTONE@"
-LAUNCHER_NAME="@LAUNCHER_NAME@"
-PRODUCT_NAME="@PRODUCT_NAME@"
-PRODUCT_SUFFIX="@PRODUCT_SUFFIX@"
-JDK_RC_PLATFORM_NAME="@JDK_RC_PLATFORM_NAME@"
-COMPANY_NAME="@COMPANY_NAME@"
-
-# Different version strings generated from the above information.
-JDK_VERSION="@JDK_VERSION@"
-RUNTIME_NAME="@RUNTIME_NAME@"
-FULL_VERSION="@FULL_VERSION@"
-JRE_RELEASE_VERSION="@FULL_VERSION@"
-RELEASE="@RELEASE@"
-COOKED_BUILD_NUMBER="@COOKED_BUILD_NUMBER@"
-
-# How to compile the code: release, fastdebug or slowdebug
-DEBUG_LEVEL="@DEBUG_LEVEL@"
-
-# This is the JDK variant to build.
-# The JDK variant is a name for a specific set of modules to be compiled for the JDK.
-JDK_VARIANT="@JDK_VARIANT@"
-
-# Should we compile support for running with a graphical UI? (ie headful)
-# Should we compile support for running without? (ie headless)
-SUPPORT_HEADFUL="@SUPPORT_HEADFUL@"
-SUPPORT_HEADLESS="@SUPPORT_HEADLESS@"
-
-# These are the libjvms that we want to build.
-# The java launcher uses the default.
-# The other can be selected by specifying -client -server -kernel -zero or -zeroshark
-# on the java launcher command line.
-JVM_VARIANTS="@JVM_VARIANTS@"
-JVM_VARIANT_SERVER="@JVM_VARIANT_SERVER@"
-JVM_VARIANT_CLIENT="@JVM_VARIANT_CLIENT@"
-JVM_VARIANT_KERNEL="@JVM_VARIANT_KERNEL@"
-JVM_VARIANT_ZERO="@JVM_VARIANT_ZERO@"
-JVM_VARIANT_ZEROSHARK="@JVM_VARIANT_ZEROSHARK@"
-
-# Legacy setting: OPT or DBG
-VARIANT="@VARIANT@"
-# Legacy setting: true or false
-FASTDEBUG="@FASTDEBUG@"
-# Legacy setting: debugging the class files?
-DEBUG_CLASSFILES="@DEBUG_CLASSFILES@"
-# Legacy setting: -debug or -fastdebug
-BUILD_VARIANT_RELEASE="@BUILD_VARIANT_RELEASE@"
-
-LANGTOOLS_OUTPUTDIR="@LANGTOOLS_OUTPUTDIR@"
-CORBA_OUTPUTDIR="@CORBA_OUTPUTDIR@"
-JAXP_OUTPUTDIR="@JAXP_OUTPUTDIR@"
-JAXWS_OUTPUTDIR="@JAXWS_OUTPUTDIR@"
-HOTSPOT_OUTPUTDIR="@HOTSPOT_OUTPUTDIR@"
-
-# This where a working jvm is built.
-# You can run ${JDK_OUTPUTDIR}/bin/java
-# Though the layout of the contents of ${JDK_OUTPUTDIR} is not
-# yet the same as a default installation.
-JDK_OUTPUTDIR="@OUTPUT_ROOT@"/jdk
-
-# When you run "make install" it will create the standardized
-# layout for the jdk and the jre inside the images subdir.
-# Then it will copy the contents of the jdk into the installation
-# directory.
-IMAGES_OUTPUTDIR="@OUTPUT_ROOT@"/images
-
-LANGTOOLS_DIST="@LANGTOOLS_DIST@"
-CORBA_DIST="@CORBA_DIST@"
-JAXP_DIST="@JAXP_DIST@"
-JAXWS_DIST="@JAXWS_DIST@"
-HOTSPOT_DIST="@HOTSPOT_DIST@"
-
-# Legacy variables used by Release.gmk
-JDK_IMAGE_DIR=${IMAGES_OUTPUTDIR}/j2sdk-image
-JRE_IMAGE_DIR=${IMAGES_OUTPUTDIR}/j2re-image
-
-# Can be /sparcv9 or /amd64 on Solaris
-ISA_DIR="@LEGACY_OPENJDK_TARGET_CPU3@"
-BINDIR="${JDK_OUTPUTDIR}/bin${ISA_DIR}"
-
-# The boot jdk to use
-ALT_BOOTDIR="@BOOT_JDK@"
-BOOT_JDK="@BOOT_JDK@"
-BOOT_JDK_JVMARGS="@BOOT_JDK_JVMARGS@"
-BOOT_RTJAR="@BOOT_RTJAR@"
-BOOT_TOOLSJAR="@BOOT_TOOLSJAR@"
-
-# When compiling Java source to be run by the boot jdk
-# use these extra flags, eg -source 6 -target 6
-BOOT_JDK_SOURCETARGET="@BOOT_JDK_SOURCETARGET@"
-
-# Information about the build system
-NUM_CORES="@NUM_CORES@"
-# This is used from the jdk build for C/C++ code.
-PARALLEL_COMPILE_JOBS="@CONCURRENT_BUILD_JOBS@"
-# Store javac server synchronization files here, and
-# the javac server log files.
-JAVAC_SERVERS="@JAVAC_SERVERS@"
-# Should we use a javac server or not? The javac server gives
-# an enormous performance improvement since it reduces the
-# startup costs of javac and reuses as much as possible of intermediate
-# compilation work. But if we want to compile with a non-Java
-# javac compiler, like gcj. Then we cannot use javac server and
-# this variable is set to false.
-JAVAC_USE_REMOTE="@JAVAC_USE_REMOTE@"
-# We can block the Javac server to never use more cores than this.
-# This is not for performance reasons, but for memory usage, since each
-# core requires its own JavaCompiler. We might have 64 cores and 4GB
-# of memory, 64 JavaCompilers will currently not fit in a 3GB heap.
-# Since there is no sharing of data between the JavaCompilers.
-JAVAC_SERVER_CORES="@JAVAC_SERVER_CORES@"
-# Should we use dependency tracking between Java packages? true or false.
-JAVAC_USE_DEPS="@JAVAC_USE_DEPS@"
-# We can invoke javac: SINGLE_THREADED_BATCH or MULTI_CORE_CONCURRENT
-JAVAC_USE_MODE="@JAVAC_USE_MODE@"
-# Enable not yet complete sjavac support.
-ENABLE_SJAVAC="@ENABLE_SJAVAC@"
-
-# The OpenJDK makefiles should be changed to using the standard
-# configure output ..._CFLAGS and ..._LIBS. In the meantime we
-# extract the information here.
-FREETYPE2_LIB_PATH="@FREETYPE2_LIB_PATH@"
-FREETYPE2_LIBS="@FREETYPE2_LIBS@"
-FREETYPE2_CFLAGS="@FREETYPE2_CFLAGS@"
-USING_SYSTEM_FT_LIB="@USING_SYSTEM_FT_LIB@"
-CUPS_CFLAGS="@CUPS_CFLAGS@"
-
-PACKAGE_PATH="@PACKAGE_PATH@"
-
-# Source file for cacerts
-CACERTS_FILE="@CACERTS_FILE@"
-
-#MOZILLA_HEADERS_PATH=
-
-# Necessary additional compiler flags to compile X11
-X_CFLAGS="@X_CFLAGS@"
-X_LIBS="@X_LIBS@"
-OPENWIN_HOME="@OPENWIN_HOME@"
-
-# There are two types: CC or CL
-# CC is gcc and others behaving reasonably similar.
-# CL is cl.exe only.
-COMPILER_TYPE="@COMPILER_TYPE@"
-
-# Flags used for overriding the default opt setting for a C/C++ source file.
-C_O_FLAG_HIGHEST="@C_O_FLAG_HIGHEST@"
-C_O_FLAG_HI="@C_O_FLAG_HI@"
-C_O_FLAG_NORM="@C_O_FLAG_NORM@"
-C_O_FLAG_NONE="@C_O_FLAG_NONE@"
-CXX_O_FLAG_HIGHEST="@CXX_O_FLAG_HIGHEST@"
-CXX_O_FLAG_HI="@CXX_O_FLAG_HI@"
-CXX_O_FLAG_NORM="@CXX_O_FLAG_NORM@"
-CXX_O_FLAG_NONE="@CXX_O_FLAG_NONE@"
-
-C_FLAG_DEPS="@C_FLAG_DEPS@"
-CXX_FLAG_DEPS="@CXX_FLAG_DEPS@"
-
-# Tools that potentially need to be cross compilation aware.
-CC="@UNCYGDRIVE@ @CCACHE@ @CC@"
-
-# CFLAGS used to compile the jdk native libraries (C-code)
-CFLAGS_JDKLIB="@CFLAGS_JDKLIB@"
-CXXFLAGS_JDKLIB="@CXXFLAGS_JDKLIB@"
-
-# CFLAGS used to compile the jdk native launchers (C-code)
-CFLAGS_JDKEXE="@CFLAGS_JDKEXE@"
-CXXFLAGS_JDKEXE="@CXXFLAGS_JDKEXE@"
-
-CXX="@UNCYGDRIVE@ @CCACHE@ @CXX@"
-#CXXFLAGS="@CXXFLAGS@"
-
-OBJC="@CCACHE@ @OBJC@"
-#OBJCFLAGS="@OBJCFLAGS@"
-
-CPP="@UNCYGDRIVE@ @CPP@"
-#CPPFLAGS="@CPPFLAGS@"
-
-# The linker can be gcc or ld on posix systems, or link.exe on winapi systems.
-LD="@UNCYGDRIVE@ @LD@"
-
-# LDFLAGS used to link the jdk native libraries (C-code)
-LDFLAGS_JDKLIB="@LDFLAGS_JDKLIB@"
-LDFLAGS_JDKLIB_SUFFIX="@LDFLAGS_JDKLIB_SUFFIX@"
-
-# On some platforms the linker cannot be used to create executables, thus
-# the need for a separate LDEXE command.
-LDEXE="@UNCYGDRIVE@ @LDEXE@"
-
-# LDFLAGS used to link the jdk native launchers (C-code)
-LDFLAGS_JDKEXE="@LDFLAGS_JDKEXE@"
-LDFLAGS_JDKEXE_SUFFIX="@LDFLAGS_JDKEXE_SUFFIX@"
-
-# Sometimes a different linker is needed for c++ libs
-LDCXX="@UNCYGDRIVE@ @LDCXX@"
-# The flags for linking libstdc++ linker.
-LIBCXX="@LIBCXX@"
-
-# Sometimes a different linker is needed for c++ executables
-LDEXECXX="@UNCYGDRIVE@ @LDEXECXX@"
-
-# If cross compiling, then define CROSS_COMPILE_ARCH=cpu_name here.
-# The HOSTCC should really be named BUILDCC, ie build executable for
-# the build platform. Same as CC when not cross compiling.
-HOSTCC="@HOSTCC@"
-HOSTCXX="@HOSTCXX@"
-# And of course, the jdk spells HOSTCC as NIO_CC/HOST_CC
-HOST_CC="@HOSTCC@"
-NIO_CC="@HOSTCC@"
-
-AS="@AS@"
-ASFLAGS="@ASFLAGS@"
-
-# AR is used to create a static library (is ar in posix, lib.exe in winapi)
-AR="@UNCYGDRIVE@ @AR@"
-ARFLAGS="@ARFLAGS@"
-
-NM="@NM@"
-STRIP="@STRIP@"
-MCS="@MCS@"
-
-# Command to create a shared library
-SHARED_LIBRARY_FLAGS="@SHARED_LIBRARY_FLAGS@"
-
-# Options to linker to specify a mapfile.
-# (Note absence of = assignment, because we do not want to evaluate the macro body here)
-SET_SHARED_LIBRARY_MAPFILE="@SET_SHARED_LIBRARY_MAPFILE@"
-
-# Options for C/CXX compiler to be used if linking is performed
-# using reorder file
-C_FLAG_REORDER="@C_FLAG_REORDER@"
-CXX_FLAG_REORDER="@CXX_FLAG_REORDER@"
-
-#
-# Options for generating debug symbols
-ENABLE_DEBUG_SYMBOLS="@ENABLE_DEBUG_SYMBOLS@"
-CFLAGS_DEBUG_SYMBOLS="@CFLAGS_DEBUG_SYMBOLS@"
-CXXFLAGS_DEBUG_SYMBOLS="@CXXFLAGS_DEBUG_SYMBOLS@"
-ZIP_DEBUGINFO_FILES="@ZIP_DEBUGINFO_FILES@"
-
-# Options to linker to specify the library name.
-# (Note absence of = assignment, because we do not want to evaluate the macro body here)
-SET_SHARED_LIBRARY_NAME="@SET_SHARED_LIBRARY_NAME@"
-
-# Set origin using the linker, ie use the relative path to the dependent library to find the dependees.
-# (Note absence of = assignment, because we do not want to evaluate the macro body here)
-SET_SHARED_LIBRARY_ORIGIN="@SET_SHARED_LIBRARY_ORIGIN@"
-
-# Different OS:es have different ways of naming shared libraries.
-# The SHARED_LIBRARY macro takes "verify" as and argument and returns:
-# "libverify.so" or "libverify.dylib" or "verify.dll" depending on platform.
-# (Note absence of = assignment, because we do not want to evaluate the macro body here)
-SHARED_LIBRARY="@SHARED_LIBRARY@"
-STATIC_LIBRARY="@STATIC_LIBRARY@"
-LIBRARY_PREFIX="@LIBRARY_PREFIX@"
-SHARED_LIBRARY_SUFFIX="@SHARED_LIBRARY_SUFFIX@"
-STATIC_LIBRARY_SUFFIX="@STATIC_LIBRARY_SUFFIX@"
-EXE_SUFFIX="@EXE_SUFFIX@"
-OBJ_SUFFIX="@OBJ_SUFFIX@"
+CAT="@CAT@"
+CD=cd
+CP="@CP@"
+DIFF="@DIFF@"
+ECHO="@ECHO@"
+FIND="@FIND@"
+GREP="@GREP@"
+RM="@RM@"
+SED="@SED@"
POST_STRIP_CMD="@POST_STRIP_CMD@"
-POST_MCS_CMD='@POST_MCS_CMD@'
-
-JAVA_FLAGS="@BOOT_JDK_JVMARGS@"
-
-JAVA="@UNCYGDRIVE@ @JAVA@ ${JAVA_FLAGS}"
-
-JAVAC="@UNCYGDRIVE@ @JAVAC@"
-JAVAC_FLAGS="@JAVAC_FLAGS@"
-
-JAVAH="@UNCYGDRIVE@ @JAVAH@"
-
-JAR="@UNCYGDRIVE@ @JAR@"
-
-RMIC="@UNCYGDRIVE@ @RMIC@"
-
-NATIVE2ASCII="@UNCYGDRIVE@ @NATIVE2ASCII@"
-
-BOOT_JAR_CMD="@UNCYGDRIVE@ @JAR@"
-BOOT_JAR_JFLAGS=
-
-# Tools adhering to a minimal and common standard of posix compliance.
-AWK="@AWK@"
-CAT="@CAT@"
-CCACHE="@CCACHE@"
-# CD is going away, but remains to cater for legacy makefiles.
-CD=cd
-CHMOD="@CHMOD@"
-CP="@CP@"
-CPIO="@CPIO@"
-CUT="@CUT@"
-DATE="@DATE@"
-DF="@DF@"
-DIFF="@DIFF@"
-FIND="@FIND@"
-FIND_DELETE="@FIND_DELETE@"
-ECHO="@ECHO@"
-EGREP="@EGREP@"
-FGREP="@FGREP@"
-GREP="@GREP@"
-HEAD="@HEAD@"
-LS="@LS@"
-LN="@LN@"
-MKDIR="@MKDIR@"
-MV="@MV@"
-NAWK="@NAWK@"
-PRINTF="@PRINTF@"
-PWD="@THEPWDCMD@"
-RM="@RM@"
-SED="@SED@"
-SH="@SH@"
-SORT="@SORT@"
-TAR="@TAR@"
-TAIL="@TAIL@"
-TEE="@TEE@"
-TR="@TR@"
-TOUCH="@TOUCH@"
-WC="@WC@"
-XARGS="@XARGS@"
-ZIPEXE="@ZIP@"
-ZIP="@ZIP@"
-UNZIP="@UNZIP@"
-MT="@UNCYGDRIVE@ @MT@"
-RC="@UNCYGDRIVE@ @RC@"
-DUMPBIN="@UNCYGDRIVE@ @DUMPBIN@"
-CYGPATH="@CYGPATH@"
-LDD="@LDD@"
-OTOOL="@OTOOL@"
-READELF="@READELF@"
-EXPR="@EXPR@"
-FILE="@FILE@"
-HG="@HG@"
-OBJCOPY="@OBJCOPY@"
-
-UNCYGDRIVE="@UNCYGDRIVE@"
-
-# Build setup
-ENABLE_DOCS="@ENABLE_DOCS@"
-GENERATE_DOCS="@ENABLE_DOCS@"
-DISABLE_NIMBUS="@DISABLE_NIMBUS@"
-USE_EXTERNAL_LIBJPEG="@USE_EXTERNAL_LIBJPEG@"
-USE_EXTERNAL_LIBGIF="@USE_EXTERNAL_LIBGIF@"
-USE_EXTERNAL_LIBZ="@USE_EXTERNAL_LIBZ@"
-LIBZIP_CAN_USE_MMAP="@LIBZIP_CAN_USE_MMAP@"
-CHECK_FOR_VCINSTALLDIR="@CHECK_FOR_VCINSTALLDIR@"
-MSVCRNN_DLL="@MSVCR100DLL@"
-
-
-####################################################
-#
-# Legacy Hotspot support
-
-HOTSPOT_DIST="@HOTSPOT_DIST@"
-HOTSPOT_MAKE_ARGS="@HOTSPOT_MAKE_ARGS@"
-# This is used from the libjvm build for C/C++ code.
-HOTSPOT_BUILD_JOBS="@CONCURRENT_BUILD_JOBS@"
-# Control wether Hotspot runs Queens test after building
-TEST_IN_BUILD="@TEST_IN_BUILD@"
-
-####################################################
-#
-# INSTALLATION
-#
-
-# Common prefix for all installed files. Defaults to /usr/local,
-# but /opt/myjdk is another common version.
-INSTALL_PREFIX="@prefix@"
-
-# Directories containing architecture-dependent files should be relative to exec_prefix
-INSTALL_EXECPREFIX="@exec_prefix@"
-
-# java,javac,javah,javap etc are installed here.
-INSTALL_BINDIR="@bindir@"
-
-# Read only architecture-independent data
-INSTALL_DATADIR="@datadir@"
-
-# Root of above.
-INSTALL_DATAROOTDIR="@datarootdir@"
-
-# Doc files, other than info and man.
-INSTALL_DOCDIR="@docdir@"
-
-# Html documentation
-INSTALL_HTMLDIR="@htmldir@"
-
-# Installing C header files, JNI headers for example.
-INSTALL_INCLUDEDIR="@includedir@"
-
-# Installing library files....
-INSTALL_INCLUDEDIR="@libdir@"
-
-# Executables that other programs run.
-INSTALL_LIBEXECDIR="@libexecdir@"
-
-# Locale-dependent but architecture-independent data, such as message catalogs.
-INSTALL_LOCALEDIR="@localedir@"
-
-# Modifiable single-machine data
-INSTALL_LOCALSTATEDIR="@localstatedir@"
-
-# Man pages
-INSTALL_MANDIR="@mandir@"
-
-# Modifiable architecture-independent data.
-INSTALL_SHAREDSTATEDIR="@sharedstatedir@"
-
-# Read-only single-machine data
-INSTALL_SYSCONFDIR="@sysconfdir@"
-
-
-####################################################
-#
-# Misc
-#
-
-# Name of Service Agent library
-SALIB_NAME="@SALIB_NAME@"
-
-OS_VERSION_MAJOR="@OS_VERSION_MAJOR@"
-OS_VERSION_MINOR="@OS_VERSION_MINOR@"
-OS_VERSION_MICRO="@OS_VERSION_MICRO@"
--- a/common/autoconf/toolchain.m4 Wed Jul 05 18:22:17 2017 +0200
+++ b/common/autoconf/toolchain.m4 Wed Jul 05 18:22:52 2017 +0200
@@ -31,6 +31,19 @@
# the set env variables into the spec file.
SETUPDEVENV="# No special vars"
if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ # Store path to cygwin link.exe to help excluding it when searching for
+ # VS linker.
+ AC_PATH_PROG(CYGWIN_LINK, link)
+ AC_MSG_CHECKING([if the first found link.exe is actually the Cygwin link tool])
+ "$CYGWIN_LINK" --version > /dev/null
+ if test $? -eq 0 ; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ # This might be the VS linker. Don't exclude it later on.
+ CYGWIN_LINK=""
+ fi
+
# If vcvarsall.bat has been run, then VCINSTALLDIR is set.
if test "x$VCINSTALLDIR" != x; then
# No further setup is needed. The build will happen from this kind
@@ -57,12 +70,12 @@
AC_MSG_RESULT([no])
AC_MSG_ERROR([Tried to find a VS installation using both $SEARCH_ROOT but failed. Please run "c:\\cygwin\\bin\\bash.exe -l" from a VS command prompt and then run configure/make from there.])
fi
- case "$LEGACY_OPENJDK_TARGET_CPU1" in
- i?86)
+ case "$OPENJDK_TARGET_CPU" in
+ x86)
VARSBAT_ARCH=x86
;;
- *)
- VARSBAT_ARCH=$LEGACY_OPENJDK_TARGET_CPU1
+ x86_64)
+ VARSBAT_ARCH=amd64
;;
esac
# Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
@@ -122,9 +135,6 @@
# Configure the development tool paths and potential sysroot.
#
AC_LANG(C++)
-DEVKIT=
-SYS_ROOT=/
-AC_SUBST(SYS_ROOT)
# The option used to specify the target .o,.a or .so file.
# When compiling, how to specify the to be created object file.
@@ -153,44 +163,28 @@
# Setting only --host, does not seem to be really supported.
# Please set both --build and --host if you want to cross compile.
-DEFINE_CROSS_COMPILE_ARCH=""
-HOSTCC=""
-HOSTCXX=""
-HOSTLD=""
-AC_SUBST(DEFINE_CROSS_COMPILE_ARCH)
-AC_MSG_CHECKING([if this is a cross compile])
-if test "x$OPENJDK_BUILD_SYSTEM" != "x$OPENJDK_TARGET_SYSTEM"; then
- AC_MSG_RESULT([yes, from $OPENJDK_BUILD_SYSTEM to $OPENJDK_TARGET_SYSTEM])
- # We have detected a cross compile!
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$LEGACY_OPENJDK_TARGET_CPU1"
+if test "x$COMPILE_TYPE" = "xcross"; then
# Now we to find a C/C++ compiler that can build executables for the build
# platform. We can't use the AC_PROG_CC macro, since it can only be used
- # once.
- AC_PATH_PROGS(HOSTCC, [cl cc gcc])
- WHICHCMD(HOSTCC)
- AC_PATH_PROGS(HOSTCXX, [cl CC g++])
- WHICHCMD(HOSTCXX)
- AC_PATH_PROG(HOSTLD, ld)
- WHICHCMD(HOSTLD)
- # Building for the build platform should be easy. Therefore
- # we do not need any linkers or assemblers etc.
-else
- AC_MSG_RESULT([no])
+ # once. Also, we need to do this before adding a tools dir to the path,
+ # otherwise we might pick up cross-compilers which don't use standard naming.
+ # Otherwise, we'll set the BUILD_tools to the native tools, but that'll have
+ # to wait until they are properly discovered.
+ AC_PATH_PROGS(BUILD_CC, [cl cc gcc])
+ SET_FULL_PATH(BUILD_CC)
+ AC_PATH_PROGS(BUILD_CXX, [cl CC g++])
+ SET_FULL_PATH(BUILD_CXX)
+ AC_PATH_PROG(BUILD_LD, ld)
+ SET_FULL_PATH(BUILD_LD)
fi
+AC_SUBST(BUILD_CC)
+AC_SUBST(BUILD_CXX)
+AC_SUBST(BUILD_LD)
-# You can force the sys-root if the sys-root encoded into the cross compiler tools
-# is not correct.
-AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root],
- [pass this sys-root to the compilers and linker (useful if the sys-root encoded in
- the cross compiler tools is incorrect)])])
-
-if test "x$with_sys_root" != x; then
- SYS_ROOT=$with_sys_root
-fi
-
# If a devkit is found on the builddeps server, then prepend its path to the
# PATH variable. If there are cross compilers available in the devkit, these
# will be found by AC_PROG_CC et al.
+DEVKIT=
BDEPS_CHECK_MODULE(DEVKIT, devkit, xxx,
[# Found devkit
PATH="$DEVKIT/bin:$PATH"
@@ -218,21 +212,6 @@
ORG_CXXFLAGS="$CXXFLAGS"
ORG_OBJCFLAGS="$OBJCFLAGS"
-AC_ARG_WITH([tools-dir], [AS_HELP_STRING([--with-tools-dir],
- [search this directory for compilers and tools])], [TOOLS_DIR=$with_tools_dir])
-
-AC_ARG_WITH([devkit], [AS_HELP_STRING([--with-devkit],
- [use this directory as base for tools-dir and sys-root])], [
- if test "x$with_sys_root" != x; then
- AC_MSG_ERROR([Cannot specify both --with-devkit and --with-sys-root at the same time])
- fi
- if test "x$with_tools_dir" != x; then
- AC_MSG_ERROR([Cannot specify both --with-devkit and --with-tools-dir at the same time])
- fi
- TOOLS_DIR=$with_devkit/bin
- SYS_ROOT=$with_devkit/$host_alias/libc
- ])
-
# autoconf magic only relies on PATH, so update it if tools dir is specified
OLD_PATH="$PATH"
if test "x$TOOLS_DIR" != x; then
@@ -251,7 +230,7 @@
# Do not use cc on MacOSX use gcc instead.
CC="gcc"
fi
-WHICHCMD(CC)
+SET_FULL_PATH(CC)
AC_PROG_CXX([cl CC g++])
if test "x$CXX" = xCC && test "x$OPENJDK_BUILD_OS" = xmacosx; then
@@ -259,7 +238,7 @@
# c++ code. Override.
CXX="g++"
fi
-WHICHCMD(CXX)
+SET_FULL_PATH(CXX)
if test "x$CXX" = x || test "x$CC" = x; then
HELP_MSG_MISSING_DEPENDENCY([devkit])
@@ -268,7 +247,7 @@
if test "x$OPENJDK_BUILD_OS" != xwindows; then
AC_PROG_OBJC
- WHICHCMD(OBJC)
+ SET_FULL_PATH(OBJC)
else
OBJC=
fi
@@ -279,19 +258,11 @@
CXXFLAGS="$ORG_CXXFLAGS"
OBJCFLAGS="$ORG_OBJCFLAGS"
-# If we are not cross compiling, use the same compilers for
-# building the build platform executables.
-if test "x$DEFINE_CROSS_COMPILE_ARCH" = x; then
- HOSTCC="$CC"
- HOSTCXX="$CXX"
-fi
-
-AC_CHECK_TOOL(LD, ld)
-WHICHCMD(LD)
LD="$CC"
LDEXE="$CC"
LDCXX="$CXX"
LDEXECXX="$CXX"
+AC_SUBST(LD)
# LDEXE is the linker to use, when creating executables.
AC_SUBST(LDEXE)
# Linking C++ libraries.
@@ -299,8 +270,10 @@
# Linking C++ executables.
AC_SUBST(LDEXECXX)
-AC_CHECK_TOOL(AR, ar)
-WHICHCMD(AR)
+if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ AC_CHECK_TOOL(AR, ar)
+ SET_FULL_PATH(AR)
+fi
if test "x$OPENJDK_BUILD_OS" = xmacosx; then
ARFLAGS="-r"
else
@@ -316,25 +289,31 @@
EXE_OUT_OPTION=-out:
LD_OUT_OPTION=-out:
AR_OUT_OPTION=-out:
- # On Windows, reject /usr/bin/link, which is a cygwin
+ # On Windows, reject /usr/bin/link (as determined in CYGWIN_LINK), which is a cygwin
# program for something completely different.
- AC_CHECK_PROG([WINLD], [link],[link],,, [/usr/bin/link])
+ AC_CHECK_PROG([WINLD], [link],[link],,, [$CYGWIN_LINK])
# Since we must ignore the first found link, WINLD will contain
# the full path to the link.exe program.
- WHICHCMD_SPACESAFE([WINLD])
+ SET_FULL_PATH_SPACESAFE([WINLD])
+ printf "Windows linker was found at $WINLD\n"
+ AC_MSG_CHECKING([if the found link.exe is actually the Visual Studio linker])
+ "$WINLD" --version > /dev/null
+ if test $? -eq 0 ; then
+ AC_MSG_RESULT([no])
+ AC_MSG_ERROR([This is the Cygwin link tool. Please check your PATH and rerun configure.])
+ else
+ AC_MSG_RESULT([yes])
+ fi
LD="$WINLD"
LDEXE="$WINLD"
LDCXX="$WINLD"
LDEXECXX="$WINLD"
- # Set HOSTLD to same as LD until we fully support cross compilation
- # on windows.
- HOSTLD="$WINLD"
AC_CHECK_PROG([MT], [mt], [mt],,, [/usr/bin/mt])
- WHICHCMD_SPACESAFE([MT])
+ SET_FULL_PATH_SPACESAFE([MT])
# The resource compiler
AC_CHECK_PROG([RC], [rc], [rc],,, [/usr/bin/rc])
- WHICHCMD_SPACESAFE([RC])
+ SET_FULL_PATH_SPACESAFE([RC])
RC_FLAGS="-nologo /l 0x409 /r"
AS_IF([test "x$VARIANT" = xOPT], [
@@ -354,12 +333,12 @@
# lib.exe is used to create static libraries.
AC_CHECK_PROG([WINAR], [lib],[lib],,,)
- WHICHCMD_SPACESAFE([WINAR])
+ SET_FULL_PATH_SPACESAFE([WINAR])
AR="$WINAR"
ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
AC_CHECK_PROG([DUMPBIN], [dumpbin], [dumpbin],,,)
- WHICHCMD_SPACESAFE([DUMPBIN])
+ SET_FULL_PATH_SPACESAFE([DUMPBIN])
COMPILER_TYPE=CL
CCXXFLAGS="$CCXXFLAGS -nologo"
@@ -368,10 +347,20 @@
AC_SUBST(COMPILER_TYPE)
AC_PROG_CPP
-WHICHCMD(CPP)
+SET_FULL_PATH(CPP)
AC_PROG_CXXCPP
-WHICHCMD(CXXCPP)
+SET_FULL_PATH(CXXCPP)
+
+if test "x$COMPILE_TYPE" != "xcross"; then
+ # If we are not cross compiling, use the same compilers for
+ # building the build platform executables. The cross-compilation
+ # case needed to be done earlier, but this can only be done after
+ # the native tools have been localized.
+ BUILD_CC="$CC"
+ BUILD_CXX="$CXX"
+ BUILD_LD="$LD"
+fi
# for solaris we really need solaris tools, and not gnu equivalent
# these seems to normally reside in /usr/ccs/bin so add that to path before
@@ -386,27 +375,24 @@
# Find the right assembler.
if test "x$OPENJDK_BUILD_OS" = xsolaris; then
AC_PATH_PROG(AS, as)
- WHICHCMD(AS)
- ASFLAGS=" "
+ SET_FULL_PATH(AS)
else
AS="$CC -c"
- ASFLAGS=" "
fi
AC_SUBST(AS)
-AC_SUBST(ASFLAGS)
if test "x$OPENJDK_BUILD_OS" = xsolaris; then
- AC_PATH_PROG(NM, nm)
- WHICHCMD(NM)
+ AC_PATH_PROGS(NM, [gnm nm])
+ SET_FULL_PATH(NM)
AC_PATH_PROG(STRIP, strip)
- WHICHCMD(STRIP)
+ SET_FULL_PATH(STRIP)
AC_PATH_PROG(MCS, mcs)
- WHICHCMD(MCS)
-else
+ SET_FULL_PATH(MCS)
+elif test "x$OPENJDK_BUILD_OS" != xwindows; then
AC_CHECK_TOOL(NM, nm)
- WHICHCMD(NM)
+ SET_FULL_PATH(NM)
AC_CHECK_TOOL(STRIP, strip)
- WHICHCMD(STRIP)
+ SET_FULL_PATH(STRIP)
fi
###
@@ -421,6 +407,11 @@
AC_PATH_TOOL(OBJCOPY, objcopy)
fi
+if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ AC_PATH_PROG(LIPO, lipo)
+ SET_FULL_PATH(LIPO)
+fi
+
# Restore old path without tools dir
PATH="$OLD_PATH"
])
@@ -449,15 +440,13 @@
SET_SHARED_LIBRARY_MAPFILE='-Xlinker -version-script=[$]1'
C_FLAG_REORDER=''
CXX_FLAG_REORDER=''
- SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN/[$]1'
+ SET_SHARED_LIBRARY_ORIGIN='-Xlinker -z -Xlinker origin -Xlinker -rpath -Xlinker \$$$$ORIGIN[$]1'
+ SET_EXECUTABLE_ORIGIN='-Xlinker -rpath -Xlinker \$$$$ORIGIN[$]1'
LD="$CC"
LDEXE="$CC"
LDCXX="$CXX"
LDEXECXX="$CXX"
POST_STRIP_CMD="$STRIP -g"
- if test "x$JDK_VARIANT" = xembedded; then
- POST_STRIP_CMD="$STRIP --strip-unneeded"
- fi
# Linking is different on MacOSX
if test "x$OPENJDK_BUILD_OS" = xmacosx; then
@@ -470,6 +459,7 @@
SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/[$]1'
SET_SHARED_LIBRARY_MAPFILE=''
SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
POST_STRIP_CMD="$STRIP -S"
fi
else
@@ -480,7 +470,7 @@
LIBRARY_PREFIX=lib
SHARED_LIBRARY='lib[$]1.so'
STATIC_LIBRARY='lib[$]1.a'
- SHARED_LIBRARY_FLAGS="-z defs -xildoff -ztext -G"
+ SHARED_LIBRARY_FLAGS="-G"
SHARED_LIBRARY_SUFFIX='.so'
STATIC_LIBRARY_SUFFIX='.a'
OBJ_SUFFIX='.o'
@@ -489,7 +479,8 @@
SET_SHARED_LIBRARY_MAPFILE='-M[$]1'
C_FLAG_REORDER='-xF'
CXX_FLAG_REORDER='-xF'
- SET_SHARED_LIBRARY_ORIGIN='-R \$$$$ORIGIN/[$]1'
+ SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN[$]1'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
CFLAGS_JDKLIB_EXTRA='-xstrconst'
@@ -511,6 +502,7 @@
SET_SHARED_LIBRARY_NAME=''
SET_SHARED_LIBRARY_MAPFILE=''
SET_SHARED_LIBRARY_ORIGIN=''
+ SET_EXECUTABLE_ORIGIN=''
fi
fi
@@ -527,6 +519,7 @@
AC_SUBST(C_FLAG_REORDER)
AC_SUBST(CXX_FLAG_REORDER)
AC_SUBST(SET_SHARED_LIBRARY_ORIGIN)
+AC_SUBST(SET_EXECUTABLE_ORIGIN)
AC_SUBST(POST_STRIP_CMD)
AC_SUBST(POST_MCS_CMD)
@@ -542,6 +535,25 @@
# Setup the opt flags for different compilers
# and different operating systems.
#
+
+#
+# NOTE: check for -mstackrealign needs to be below potential addition of -m32
+#
+if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ # On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
+ # While waiting for a better solution, the current workaround is to use -mstackrealign.
+ CFLAGS="$CFLAGS -mstackrealign"
+ AC_MSG_CHECKING([if 32-bit compiler supports -mstackrealign])
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[int main() { return 0; }]])],
+ [
+ AC_MSG_RESULT([yes])
+ ],
+ [
+ AC_MSG_RESULT([no])
+ AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.])
+ ])
+fi
+
C_FLAG_DEPS="-MMD -MF"
CXX_FLAG_DEPS="-MMD -MF"
@@ -566,7 +578,7 @@
CXXFLAGS_DEBUG_SYMBOLS="-g"
if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
CFLAGS_DEBUG_SYMBOLS="-g1"
- CXXFLAGS_DEBUG_SYMBOLSG="-g1"
+ CXXFLAGS_DEBUG_SYMBOLS="-g1"
fi
;;
esac
@@ -578,52 +590,56 @@
#
# Forte has different names for this with their C++ compiler...
#
- C_FLAG_DEPS="-xMMD -xMF"
- CXX_FLAG_DEPS="-xMMD -xMF"
+ C_FLAG_DEPS="-xMMD -xMF"
+ CXX_FLAG_DEPS="-xMMD -xMF"
-# Extra options used with HIGHEST
-#
-# WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
-# done with care, there are some assumptions below that need to
-# be understood about the use of pointers, and IEEE behavior.
-#
-# Use non-standard floating point mode (not IEEE 754)
-CC_HIGHEST="$CC_HIGHEST -fns"
-# Do some simplification of floating point arithmetic (not IEEE 754)
-CC_HIGHEST="$CC_HIGHEST -fsimple"
-# Use single precision floating point with 'float'
-CC_HIGHEST="$CC_HIGHEST -fsingle"
-# Assume memory references via basic pointer types do not alias
-# (Source with excessing pointer casting and data access with mixed
-# pointer types are not recommended)
-CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
-# Use intrinsic or inline versions for math/std functions
-# (If you expect perfect errno behavior, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
-# Loop data dependency optimizations (need -xO3 or higher)
-CC_HIGHEST="$CC_HIGHEST -xdepend"
-# Pointer parameters to functions do not overlap
-# (Similar to -xalias_level=basic usage, but less obvious sometimes.
-# If you pass in multiple pointers to the same data, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xrestrict"
-# Inline some library routines
-# (If you expect perfect errno behavior, do not use this)
-CC_HIGHEST="$CC_HIGHEST -xlibmil"
-# Use optimized math routines
-# (If you expect perfect errno behavior, do not use this)
-# Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
-#CC_HIGHEST="$CC_HIGHEST -xlibmopt"
+ # Extra options used with HIGHEST
+ #
+ # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
+ # done with care, there are some assumptions below that need to
+ # be understood about the use of pointers, and IEEE behavior.
+ #
+ # Use non-standard floating point mode (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fns"
+ # Do some simplification of floating point arithmetic (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fsimple"
+ # Use single precision floating point with 'float'
+ CC_HIGHEST="$CC_HIGHEST -fsingle"
+ # Assume memory references via basic pointer types do not alias
+ # (Source with excessing pointer casting and data access with mixed
+ # pointer types are not recommended)
+ CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
+ # Use intrinsic or inline versions for math/std functions
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
+ # Loop data dependency optimizations (need -xO3 or higher)
+ CC_HIGHEST="$CC_HIGHEST -xdepend"
+ # Pointer parameters to functions do not overlap
+ # (Similar to -xalias_level=basic usage, but less obvious sometimes.
+ # If you pass in multiple pointers to the same data, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xrestrict"
+ # Inline some library routines
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xlibmil"
+ # Use optimized math routines
+ # (If you expect perfect errno behavior, do not use this)
+ # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
+ #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
- case $LEGACY_OPENJDK_TARGET_CPU1 in
- i586)
- C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xchip=pentium"
- C_O_FLAG_HI="-xO4 -Wu,-O4~yz"
- C_O_FLAG_NORM="-xO2 -Wu,-O2~yz"
- C_O_FLAG_NONE=""
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xchip=pentium"
- CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz"
- CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz"
- CXX_O_FLAG_NONE=""
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86)
+ C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
+ C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
+ C_O_FLAG_NONE="-xregs=no%frameptr"
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NONE="-xregs=no%frameptr"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
+ fi
;;
sparc)
CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
@@ -647,9 +663,11 @@
;;
CL )
D_FLAG=
- C_O_FLAG_HI="-O2"
+ C_O_FLAG_HIGHEST="-O2"
+ C_O_FLAG_HI="-O1"
C_O_FLAG_NORM="-O1"
C_O_FLAG_NONE="-Od"
+ CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
CXX_O_FLAG_HI="$C_O_FLAG_HI"
CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
@@ -680,15 +698,15 @@
[
if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
- AC_MSG_WARN([Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags"])
+ AC_MSG_WARN([Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags])
fi
if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
- AC_MSG_WARN([Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags"])
+ AC_MSG_WARN([Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags])
fi
if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
- AC_MSG_WARN([Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags"])
+ AC_MSG_WARN([Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags])
fi
AC_ARG_WITH(extra-cflags, [AS_HELP_STRING([--with-extra-cflags],
@@ -704,6 +722,15 @@
CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
+# Hotspot needs these set in their legacy form
+LEGACY_EXTRA_CFLAGS=$with_extra_cflags
+LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
+LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
+
+AC_SUBST(LEGACY_EXTRA_CFLAGS)
+AC_SUBST(LEGACY_EXTRA_CXXFLAGS)
+AC_SUBST(LEGACY_EXTRA_LDFLAGS)
+
###############################################################################
#
# Now setup the CFLAGS and LDFLAGS for the JDK build.
@@ -729,19 +756,30 @@
esac
;;
ossc )
- CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -norunpath -xnolib"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX"
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -Di386"
+ CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
+ ;;
+ esac
+
+ CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
+
+ LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
+ LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
;;
cl )
CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
-D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
-D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
-DWIN32 -DIAL"
- case $LEGACY_OPENJDK_TARGET_CPU1 in
- i?86 )
+ case $OPENJDK_TARGET_CPU in
+ x86 )
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
;;
- amd64 )
+ x86_64 )
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
;;
esac
@@ -749,24 +787,6 @@
esac
###############################################################################
-#
-# Cross-compile arch specific flags
-
-#
-if test "x$JDK_VARIANT" = "xembedded"; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DJAVASE_EMBEDDED"
-fi
-
-case $OPENJDK_TARGET_CPU_ARCH in
-arm )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fsigned-char"
- ;;
-ppc )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fsigned-char"
- ;;
-esac
-
-###############################################################################
CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
@@ -774,11 +794,17 @@
PACKAGE_PATH=/opt/local
AC_SUBST(PACKAGE_PATH)
-# Sometimes we use a cpu dir (.../lib/amd64/server)
-# Sometimes not (.../lib/server)
-LIBARCHDIR="$LEGACY_OPENJDK_TARGET_CPU2/"
-if test "x$ENDIAN" = xlittle; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
+ # The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
+ # Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
+ # (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
+ # Note: -Dmacro is the same as #define macro 1
+ # -Dmacro= is the same as #define macro
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
+ else
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+ fi
else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN"
fi
@@ -793,27 +819,29 @@
fi
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE"
- LIBARCHDIR=""
fi
if test "x$OPENJDK_TARGET_OS" = xbsd; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE"
fi
if test "x$DEBUG_LEVEL" = xrelease; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
+ fi
else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG"
fi
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$LEGACY_OPENJDK_TARGET_CPU1\"' -D$LEGACY_OPENJDK_TARGET_CPU1"
+CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
-I${JDK_OUTPUTDIR}/include \
-I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
-I${JDK_TOPDIR}/src/share/javavm/export \
- -I${JDK_TOPDIR}/src/$LEGACY_OPENJDK_TARGET_OS_API/javavm/export \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
-I${JDK_TOPDIR}/src/share/native/common \
- -I${JDK_TOPDIR}/src/$LEGACY_OPENJDK_TARGET_OS_API/native/common"
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
# The shared libraries are compiled using the picflag.
CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
@@ -833,7 +861,7 @@
# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
if test "x$COMPILER_TYPE" = xCL; then
LDFLAGS_JDK="$LDFLAGS_JDK -nologo -opt:ref -incremental:no"
- if test "x$LEGACY_OPENJDK_TARGET_CPU1" = xi586; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
fi
# TODO: make -debug optional "--disable-full-debug-symbols"
@@ -861,20 +889,18 @@
fi
LDFLAGS_JDKLIB="${LDFLAGS_JDK} $SHARED_LIBRARY_FLAGS \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}server \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}client \
- -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}"
- LDFLAGS_JDKLIB_SUFFIX="-ljvm -ljava"
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server \
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client \
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
+
+ LDFLAGS_JDKLIB_SUFFIX="-ljava -ljvm"
if test "x$COMPILER_NAME" = xossc; then
LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
fi
- # Only the jli library is explicitly linked when the launchers are built.
- # The libjvm is then dynamically loaded/linked by the launcher.
LDFLAGS_JDKEXE="${LDFLAGS_JDK}"
- if test "x$OPENJDK_TARGET_OS" != "xmacosx"; then
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -L${JDK_OUTPUTDIR}/lib/${LIBARCHDIR}jli"
- LDFLAGS_JDKEXE_SUFFIX="-ljli"
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
fi
fi
@@ -905,4 +931,5 @@
AC_SUBST(LDFLAGS_JDKEXE)
AC_SUBST(LDFLAGS_JDKLIB_SUFFIX)
AC_SUBST(LDFLAGS_JDKEXE_SUFFIX)
+AC_SUBST(LDFLAGS_CXX_JDK)
])
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/bin/boot_cycle.sh Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# The boot_cycle.sh script performs two complete image builds (no javadoc though....)
+# where the second build uses the first build as the boot jdk.
+#
+# This is useful to verify that the build is self hoisting and assists
+# in flushing out bugs. You can follow up with compare_objects.sh to check
+# that the two boot_cycle_?/images/j2sdk are identical. They should be.
+#
+# Usage:
+# Specify the configure arguments to boot_cycle.sh, for example:
+#
+# sh common/bin/boot_cycle.sh --enable-debug --with-jvm-variants=server
+#
+# The same arguments will be used for both builds, except of course --with-boot-jdk
+# that will be adjusted to boot_cycle_1 for the second build.
+
+SCRIPT_DIR=`pwd`/`dirname $0`
+ROOT_DIR=`(cd $SCRIPT_DIR/../.. ; pwd)`
+BUILD_DIR=$ROOT_DIR/build
+mkdir -p $BUILD_DIR
+AUTOCONF_DIR=`(cd $SCRIPT_DIR/../autoconf ; pwd)`
+BOOT_CYCLE_1_DIR=$BUILD_DIR/boot_cycle_1
+BOOT_CYCLE_2_DIR=$BUILD_DIR/boot_cycle_2
+
+# Create the boot cycle dirs in the build directory.
+mkdir -p $BOOT_CYCLE_1_DIR
+mkdir -p $BOOT_CYCLE_2_DIR
+
+cd $BOOT_CYCLE_1_DIR
+# Configure!
+sh $AUTOCONF_DIR/configure "$@"
+# Now build!
+make images
+
+if ! test -x $BOOT_CYCLE_1_DIR/images/j2sdk-image/bin/java ; then
+ echo Failed to build the executable $BOOT_CYCLE_1_DIR/images/j2sdk-image/bin/java
+ exit 1
+fi
+
+cd $BOOT_CYCLE_2_DIR
+# Pickup the configure arguments, but drop any --with-boot-jdk=....
+# and add the correct --with-boot-jdk=...boot_cycle_1... at the end.
+ARGUMENTS="`cat $BOOT_CYCLE_1_DIR/configure-arguments|sed 's/--with-boot-jdk=[^ ]*//'` --with-boot-jdk=$BOOT_CYCLE_1_DIR/images/j2sdk-image"
+# Configure using these adjusted arguments.
+sh $AUTOCONF_DIR/configure $ARGUMENTS
+# Now build!
+make images
+
+if ! test -x $BOOT_CYCLE_2_DIR/images/j2sdk-image/bin/java ; then
+ echo Failed to build the final executable $BOOT_CYCLE_2_DIR/images/j2sdk-image/bin/java
+ exit 1
+fi
+
+
--- a/common/bin/compare-objects.sh Wed Jul 05 18:22:17 2017 +0200
+++ b/common/bin/compare-objects.sh Wed Jul 05 18:22:52 2017 +0200
@@ -30,7 +30,7 @@
#
if [ "x$1" = "x-h" ] || [ "x$1" = "x--help" ] || [ "x$1" == "x" ]; then
- echo "bash ./common/bin/compare-build.sh old_jdk_build_dir new_jdk_build_dir"
+ echo "bash ./common/bin/compare-objects.sh old_jdk_build_dir new_jdk_build_dir <pattern>"
echo ""
echo "Compare object files"
echo ""
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/bin/test_builds.sh Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,184 @@
+#!/bin/bash
+
+set -x
+set -e
+
+options="$*"
+option="$1"
+
+tmp=/tmp/test_builds.$$
+rm -f -r ${tmp}
+mkdir -p ${tmp}
+
+errMessages=${tmp}/error_messages.txt
+
+#######
+# Error function
+error() # message
+{
+ echo "ERROR: $1" | tee -a ${errMessages}
+}
+# Check errors
+checkErrors()
+{
+ if [ -s ${errMessages} ] ; then
+ cat ${errMessages}
+ exit 1
+ fi
+}
+#######
+
+os="`uname -s`"
+arch="`uname -p`"
+make=make
+
+if [ "${os}" = "SunOS" ] ; then
+ make=gmake
+ export J7="/opt/java/jdk1.7.0"
+elif [ "${os}" = "Darwin" ] ; then
+ export J7="/Library/Java/JavaVirtualMachines/1.7.0.jdk/Contents/Home"
+elif [ "${os}" = "Linux" -a "${arch}" = "x86_64" ] ; then
+ export J7="/usr/lib/jvm/java-7-openjdk-amd64/"
+else
+ echo "What os/arch is this: ${os}/${arch}"
+ exit 1
+fi
+
+# Must have a jdk7
+if [ ! -d ${J7} ] ; then
+ echo "No JDK7 found at: ${J7}"
+ exit 1
+fi
+
+# What sources we use
+fromroot="http://hg.openjdk.java.net/build-infra/jdk8"
+
+# Where we do it
+root="testbuilds"
+mkdir -p ${root}
+
+# Three areas, last three are cloned from first to insure sameness
+t0=${root}/t0
+t1=${root}/t1
+t2=${root}/t2
+t3=${root}/t3
+repolist="${t0} ${t1} ${t2} ${t3}"
+
+# Optional complete clobber
+if [ "${option}" = "clobber" ] ; then
+ for i in ${repolist} ; do
+ rm -f -r ${i}
+ done
+fi
+
+# Get top repos
+if [ ! -d ${t0}/.hg ] ; then
+ rm -f -r ${t0}
+ hg clone ${fromroot} ${t0}
+fi
+for i in ${t1} ${t2} ${t3} ; do
+ if [ ! -d ${i}/.hg ] ; then
+ hg clone ${t0} ${i}
+ fi
+done
+
+# Get repos updated
+for i in ${repolist} ; do
+ ( \
+ set -e \
+ && cd ${i} \
+ && sh ./get_source.sh \
+ || error "Cannot get source" \
+ ) 2>&1 | tee ${i}.get_source.txt
+ checkErrors
+done
+
+# Optional clean
+if [ "${option}" = "clean" ] ; then
+ for i in ${repolist} ; do
+ rm -f -r ${i}/build
+ rm -f -r ${i}/*/build
+ rm -f -r ${i}/*/dist
+ done
+fi
+
+# Check changes on working set files
+for i in ${repolist} ; do
+ ( \
+ set -e \
+ && cd ${i} \
+ && sh ./make/scripts/hgforest.sh status \
+ || error "Cannot check status" \
+ ) 2>&1 | tee ${i}.hg.status.txt
+ checkErrors
+done
+
+# Configure for build-infra building
+for i in ${t1} ${t2} ; do
+ ( \
+ set -e \
+ && cd ${i}/common/makefiles \
+ && sh ../autoconf/configure --with-boot-jdk=${J7} \
+ || error "Cannot configure" \
+ ) 2>&1 | tee ${i}.config.txt
+ checkErrors
+done
+
+# Do build-infra builds
+for i in ${t1} ${t2} ; do
+ ( \
+ set -e \
+ && cd ${i}/common/makefiles \
+ && ${make} \
+ FULL_VERSION:=1.8.0-internal-b00 \
+ JRE_RELEASE_VERSION:=1.8.0-internal-b00 \
+ USER_RELEASE_SUFFIX:=compare \
+ RELEASE:=1.8.0-internal \
+ VERBOSE= \
+ LIBARCH= \
+ all images \
+ || error "Cannot build" \
+ ) 2>&1 | tee ${i}.build.txt
+ checkErrors
+done
+
+# Compare build-infra builds
+( \
+ sh ${t0}/common/bin/compareimage.sh \
+ ${t1}/build/*/images/j2sdk-image \
+ ${t2}/build/*/images/j2sdk-image \
+ || error "Cannot compare" \
+) 2>&1 | tee ${root}/build-infra-comparison.txt
+checkErrors
+
+# Do old build
+unset JAVA_HOME
+export ALT_BOOTDIR="${J7}"
+( \
+ cd ${t3} \
+ && ${make} FULL_VERSION='"1.8.0-internal" sanity \
+ || error "Cannot sanity" \
+) 2>&1 | tee ${t3}.sanity.txt
+checkErrors
+( \
+ cd ${t3} \
+ && ${make} \
+ FULL_VERSION='"1.8.0-internal" \
+ JRE_RELEASE_VERSION:=1.8.0-internal-b00 \
+ USER_RELEASE_SUFFIX:=compare \
+ RELEASE:=1.8.0-internal \
+ || error "Cannot build old way" \
+) 2>&1 | tee ${t3}.build.txt
+checkErrors
+
+# Compare old build to build-infra build
+( \
+ sh ${t0}/common/bin/compareimage.sh \
+ ${t3}/build/*/j2sdk-image \
+ ${t1}/build/*/images/j2sdk-image \
+ || error "Cannot compare" \
+) 2>&1 | tee ${root}/build-comparison.txt
+checkErrors
+
+exit 0
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/bin/unicode2x.sed Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,100 @@
+s/\\u0020/\x20/g
+s/\\u003A/\x3A/g
+s/\\u006B/\x6B/g
+s/\\u0075/\x75/g
+s/\\u00A0/\xA0/g
+s/\\u00A3/\xA3/g
+s/\\u00B0/\xB0/g
+s/\\u00B7/\xB7/g
+s/\\u00BA/\xBA/g
+s/\\u00BF/\xBF/g
+s/\\u00C0/\xC0/g
+s/\\u00C1/\xC1/g
+s/\\u00C2/\xC2/g
+s/\\u00C4/\xC4/g
+s/\\u00C5/\xC5/g
+s/\\u00C8/\xC8/g
+s/\\u00C9/\xC9/g
+s/\\u00CA/\xCA/g
+s/\\u00CD/\xCD/g
+s/\\u00CE/\xCE/g
+s/\\u00D3/\xD3/g
+s/\\u00D4/\xD4/g
+s/\\u00D6/\xD6/g
+s/\\u00DA/\xDA/g
+s/\\u00DC/\xDC/g
+s/\\u00DD/\xDD/g
+s/\\u00DF/\xDF/g
+s/\\u00E0/\xE0/g
+s/\\u00E1/\xE1/g
+s/\\u00E2/\xE2/g
+s/\\u00E3/\xE3/g
+s/\\u00E4/\xE4/g
+s/\\u00E5/\xE5/g
+s/\\u00E6/\xE6/g
+s/\\u00E7/\xE7/g
+s/\\u00E8/\xE8/g
+s/\\u00E9/\xE9/g
+s/\\u00EA/\xEA/g
+s/\\u00EB/\xEB/g
+s/\\u00EC/\xEC/g
+s/\\u00ED/\xED/g
+s/\\u00EE/\xEE/g
+s/\\u00EF/\xEF/g
+s/\\u00F1/\xF1/g
+s/\\u00F2/\xF2/g
+s/\\u00F3/\xF3/g
+s/\\u00F4/\xF4/g
+s/\\u00F5/\xF5/g
+s/\\u00F6/\xF6/g
+s/\\u00F9/\xF9/g
+s/\\u00FA/\xFA/g
+s/\\u00FC/\xFC/g
+s/\\u0020/\x20/g
+s/\\u003f/\x3f/g
+s/\\u006f/\x6f/g
+s/\\u0075/\x75/g
+s/\\u00a0/\xa0/g
+s/\\u00a3/\xa3/g
+s/\\u00b0/\xb0/g
+s/\\u00ba/\xba/g
+s/\\u00bf/\xbf/g
+s/\\u00c1/\xc1/g
+s/\\u00c4/\xc4/g
+s/\\u00c5/\xc5/g
+s/\\u00c8/\xc8/g
+s/\\u00c9/\xc9/g
+s/\\u00ca/\xca/g
+s/\\u00cd/\xcd/g
+s/\\u00d6/\xd6/g
+s/\\u00dc/\xdc/g
+s/\\u00dd/\xdd/g
+s/\\u00df/\xdf/g
+s/\\u00e0/\xe0/g
+s/\\u00e1/\xe1/g
+s/\\u00e2/\xe2/g
+s/\\u00e3/\xe3/g
+s/\\u00e4/\xe4/g
+s/\\u00e5/\xe5/g
+s/\\u00e7/\xe7/g
+s/\\u00e8/\xe8/g
+s/\\u00e9/\xe9/g
+s/\\u00ea/\xea/g
+s/\\u00eb/\xeb/g
+s/\\u00ec/\xec/g
+s/\\u00ed/\xed/g
+s/\\u00ee/\xee/g
+s/\\u00ef/\xef/g
+s/\\u00f0/\xf0/g
+s/\\u00f1/\xf1/g
+s/\\u00f2/\xf2/g
+s/\\u00f3/\xf3/g
+s/\\u00f4/\xf4/g
+s/\\u00f5/\xf5/g
+s/\\u00f6/\xf6/g
+s/\\u00f7/\xf7/g
+s/\\u00f8/\xf8/g
+s/\\u00f9/\xf9/g
+s/\\u00fa/\xfa/g
+s/\\u00fc/\xfc/g
+s/\\u00ff/\xff/g
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/makefiles/HotspotWrapper.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,49 @@
+#
+# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# Include the legacy hotspot-spec.gmk (which in turns includes spec.gmk)
+BASE_SPEC:=$(SPEC)
+include $(dir $(SPEC))hotspot-spec.gmk
+include MakeBase.gmk
+
+# Inclusion of this pseudo-target will cause make to execute this file
+# serially, regardless of -j. Recursively called makefiles will not be
+# affected, however. This is required for correct dependency management.
+.NOTPARALLEL:
+
+default: all
+
+# Get all files except .hg in the hotspot directory.
+HOTSPOT_FILES := $(shell $(FIND) $(HOTSPOT_TOPDIR) -name ".hg" -prune -o -print)
+
+$(HOTSPOT_OUTPUTDIR)/_hotspot.timestamp: $(HOTSPOT_FILES)
+ @($(CD) $(HOTSPOT_TOPDIR)/make && $(MAKE) -j1 $(HOTSPOT_MAKE_ARGS) SPEC=$(HOTSPOT_SPEC) BASE_SPEC=$(BASE_SPEC))
+ $(TOUCH) $@
+
+hotspot: $(HOTSPOT_OUTPUTDIR)/_hotspot.timestamp
+
+all: hotspot
+
+.PHONY: default all hotspot
--- a/common/makefiles/JavaCompilation.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/common/makefiles/JavaCompilation.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -23,40 +23,14 @@
# questions.
#
-# The complexity of this makefile is not the fault of make, but the fault
-# of javac and javah. The basic problems are:
-#
-# 1) Compiling a single Java source file unpredictably generates anything
-# between zero (0!) and an infinite number of .class files!
-# 2) There is no hint, for which classes javah needs to be run,
-# and it happily generates .h files for classes with no native methods.
-# 3) javac and javah do not cleanup anything, for example if an internal
-# class (potentially with native methods) is removed from a Java source file.
-#
-# This makefile is a tribute to GNU make. And yes, it was harder to write than it is
-# to read. The include/excludes of directories and files are only a temporary measure
-# to work around the messy jdk sources that put platform specific code in src/share/classes.
-#
-# We should move most of the functionality of this makefile into a
-# smart javac/javah/javadoc/jar combo tool. sjavac ?
-#
-# I.e. 1) It always generates a single output, a zip-file from a number of source roots.
-# The zip file contains information that enable incremental builds with full
-# dependency tracking between packages.
-# 2) It automatically generates the right .h files.
-# 3) It keeps its house clean.
-# *) Generates intermediate files to be used for javadoc generation later.
-# and does all the other useful things that this makefile does, such as:
-# use all cores for compilation, reuse the running JVM for all compilations,
-# and has pubapi dependency tracking to minimize the number of files
-# that need to be recompiled during an incremental build.
-#
-# A zip file, or several zip files combined, can then be converted to a .jar file, or to a .jmod file.
-#
-# This would make this makefile much much simpler. I.e. make can be used
-# for its real purpose, track dependencies and trigger a recompile if a
-# dependency has changed.
-#
+# This makefile is much simpler now that it can use the smart javac wrapper
+# for dependency tracking between java packages and incremental compiles.
+# It could be even more simple if we added support for incremental jar updates
+# directly from the smart javac wrapper.
+
+# Cleaning/copying properties here is not a good solution. The properties
+# should be cleaned/copied by a annotation processor in sjavac.
+
# When you read this source. Remember that $(sort ...) has the side effect
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!
@@ -67,25 +41,15 @@
FALSE_FIND_PATTERN:=-name FILE_NAME_THAT_DOESNT_EXIST
-# If compilation of java package fails, then the public api file for that
-# package will not be genereated. We add this fallback rule to generate
-# an empty pubapi file.
-%.api:
- if test ! -f $@; then $(MKDIR) -p $(@D); $(TOUCH) $@; fi
-
define SetupJavaCompiler
# param 1 is for example BOOT_JAVAC or NEW_JAVAC
# This is the name later used to decide which java compiler to use.
# param 2-9 are named args.
# JVM:=The jvm used to run the javac/javah command
# JAVAC:=The javac jar and bootstrap classpath changes, or just bin/javac if JVM is left out
- # JAVAH:=The javah jar and bootstrap classpath changes, or just bin/javah if JVM is left out
# FLAGS:=Flags to be supplied to javac
- # MODE:=SINGLE_THREADED_BATCH (primarily for old javac) or MULTI_CORE_CONCURRENT
- # only for MULTI_CORE_CONCURRENT are the options below relevant:
# SERVER_DIR:=Use a javac server (-XDserver) and store the server related files here
# SERVER_JVM:=Use this JVM for the server. Defaults to the JVM above.
- # USE_DEPS:=true means use -XDdeps,-XDpubapi and -XDnativeapi to track java dependencies
$(if $2,$1_$(strip $2))
$(if $3,$1_$(strip $3))
$(if $4,$1_$(strip $4))
@@ -96,21 +60,17 @@
$(if $9,$1_$(strip $9))
$(if $(10),$(error Internal makefile error: Too many arguments to SetupJavaCompiler, please update JavaCompilation.gmk))
- ifeq ($$($1_MODE),MULTI_CORE_CONCURRENT)
- ifneq (,$$($1_SERVER_DIR))
- # A javac server has been requested.
- # The port file contains the tcp/ip on which the server listens
- # and the cookie necessary to talk to the server.
- $1_JAVAC_PORTFILE:=$$($1_SERVER_DIR)/$1.port
- ifeq ($$($1_SERVER_JVM),)
- # You can use a different JVM to run the background javac server.
- # But if not set, it defaults to the same JVM that is used to start
- # the javac command.
- $1_SERVER_JVM:=$$($1_JVM)
- endif
- # Set the $1_REMOTE to spawn a background javac server.
- $1_REMOTE:=-XDserver:portfile=$$($1_JAVAC_PORTFILE),poolsize=$(JAVAC_SERVER_CORES),javac=$$(subst $$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_JAVAC))))
+ ifeq ($$(ENABLE_SJAVAC),yes)
+ # The port file contains the tcp/ip on which the server listens
+ # and the cookie necessary to talk to the server.
+ $1_JAVAC_PORTFILE:=$$($1_SERVER_DIR)/server.port
+ # You can use a different JVM to run the background javac server.
+ ifeq ($$($1_SERVER_JVM),)
+ # It defaults to the same JVM that is used to start the javac command.
+ $1_SERVER_JVM:=$$($1_JVM)
endif
+ # Set the $1_REMOTE to spawn a background javac server.
+ $1_REMOTE:=-XDserver:portfile=$$($1_JAVAC_PORTFILE),poolsize=$(SJAVAC_SERVER_CORES),id=$1,javac=$$(subst $$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_JAVAC))))
endif
endef
@@ -127,7 +87,7 @@
# JAR:=Jar file to create
# MANIFEST:=Optional manifest file template.
# JARMAIN:=Optional main class to add to manifest
- # JARINDEX :=
+ # JARINDEX:=true means generate the index in the jar file.
# SKIP_METAINF:=Set to prevent contents of an META-INF directory to be automatically
# added to the archive.
# EXTRA_MANIFEST_ATTR:=Extra attribute to add to manifest.
@@ -152,9 +112,6 @@
$1_MANIFEST_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_manifest
$1_DELETESS_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletess
$1_DELETES_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletes
- $1_PUBAPI_NOTIFICATIONS_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_pubapi_notifications
- $1_NATIVEAPI_NOTIFICATIONS_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_native_notifications
- $1_NATIVEAPI_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_native
$1_BIN:=$$(dir $$($1_JAR))
ifeq (,$$($1_SUFFIXES))
@@ -180,6 +137,7 @@
$1_GREP_EXCLUDES:=| $(GREP) -v -f $$($1_BIN)/_the.$$($1_JARNAME)_exclude
endif
+ # Check if this jar needs to have its index generated.
ifneq (,$$($1_JARINDEX))
$1_JARINDEX = (cd $$(dir $$@) && $(JAR) -i $$(notdir $$@))
else
@@ -188,14 +146,17 @@
# When this macro is run in the same makefile as the java compilation, dependencies are transfered
# in make variables. When the macro is run in a different makefile than the java compilation, the
# dependencies need to be found in the filesystem.
- $1_ALL_SRCS:=$$(foreach src,$$($1_SRCS),$$(shell ($(FIND) $$(src) -type f \
+ ifneq (,$2)
+ $1_DEPS:=$2
+ else
+ $1_DEPS:=$$(foreach src,$$($1_SRCS),$$(shell ($(FIND) $$(src) -type f \
-a \( $$($1_FIND_PATTERNS) \) $$($1_GREP_INCLUDES) \
- $$($1_GREP_EXCLUDES) && $(ECHO) $$($1_EXTRA_FILES))))
- ifeq (,$$($1_SKIP_METAINF))
- $1_ALL_SRCS+=$$(foreach src,$$($1_SRCS),$$(shell $(FIND) $$(src)/META-INF -type f 2> /dev/null))
+ $$($1_GREP_EXCLUDES) && $(ECHO) $$(addprefix $$(src)/,$$($1_EXTRA_FILES)))))
+ ifeq (,$$($1_SKIP_METAINF))
+ $1_DEPS+=$$(foreach src,$$($1_SRCS),$$(shell $(FIND) $$(src)/META-INF -type f 2> /dev/null))
+ endif
endif
-
# Utility macros, to make the shell script receipt somewhat easier to dechipher.
# The capture contents macro finds all files (matching the patterns, typically
@@ -208,19 +169,12 @@
# The capture deletes macro finds all deleted files and concatenates them. The resulting file
# tells us what to remove from the jar-file.
$1_CAPTURE_DELETES=$$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.deleted -newer $$@ -exec $(SED) 's|$$(src)||g' \{\} >> $$($1_DELETES_FILE) \;) &&)
- # The capture pubapi notifications scans for pubapi change notifications. If such notifications are
- # found, then we will build the classes leading up to the jar again, to take into account the new timestamps
- # on the changed pubapi files.
- $1_CAPTURE_PUBAPI_NOTIFICATIONS=$$(foreach src,$$($1_SRCS),\
- (cd $$(src) && \
- $(FIND) . -name _the.package.api.notify -exec dirname \{\} \; >> $$($1_PUBAPI_NOTIFICATIONS_FILE) ; \
- true) &&)
# The update contents macro updates the jar file with the previously capture contents.
$1_UPDATE_CONTENTS=$$(foreach src,$$($1_SRCS),\
(cd $$(src) && \
if [ -s _the.$$($1_JARNAME)_contents ]; then \
$(ECHO) " updating" `$(WC) -l _the.$$($1_JARNAME)_contents | $(AWK) '{ print $$$$1 }'` files && \
- $(JAR) uf $$@ @_the.$$($1_JARNAME)_contents; \
+ $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @_the.$$($1_JARNAME)_contents; \
fi) &&)
# The s-variants of the above macros are used when the jar is created from scratch.
$1_SCAPTURE_CONTENTS=$$(foreach src,$$($1_SRCS),\
@@ -234,30 +188,25 @@
$$(src)/_the.$$($1_JARNAME)_contents) && )
endif
$1_SUPDATE_CONTENTS=$$(foreach src,$$($1_SRCS),\
- (cd $$(src) && $(JAR) uf $$@ @$$(src)/_the.$$($1_JARNAME)_contents) &&)
+ (cd $$(src) && $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @$$(src)/_the.$$($1_JARNAME)_contents) &&)
- # The TOUCH macro is used to make sure all timestamps are identical for package files and the pubapi files.
- # If we do not do this, we get random recompilations, the next time we run make, since the order of package building is random,
- # ie independent of package --dependes on-> public api of another package. This is of course
- # due to the fact that Java source often (always?) has circular dependencies. (Thus there is no correct order
- # to compile packages, and we can just as well do them in a random order. Which we do.)
- $1_TOUCH_API_FILES=$$(foreach src,$$($1_SRCS),\
- ($(FIND) $$(src) -name _the.package.api -exec $(TOUCH) -r $$($1_JAR) \{\} \; ; true) && \
- ($(FIND) $$(src) -name _the.package -exec $(TOUCH) -r $$($1_JAR) \{\} \; ; true) &&)
# Use a slightly shorter name for logging, but with enough path to identify this jar.
$1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_JAR))
ifneq (,$$($1_CHECK_COMPRESS_JAR))
$1_JAR_CREATE_OPTIONS := c0fm
+ $1_JAR_UPDATE_OPTIONS := u0f
ifeq ($(COMPRESS_JARS), true)
$1_JAR_CREATE_OPTIONS := cfm
+ $1_JAR_UPDATE_OPTIONS := uf
endif
else
$1_JAR_CREATE_OPTIONS := cfm
+ $1_JAR_UPDATE_OPTIONS := uf
endif
# Here is the rule that creates/updates the jar file.
- $$($1_JAR) : $2 $$($1_ALL_SRC)
+ $$($1_JAR) : $$($1_DEPS)
$(MKDIR) -p $$($1_BIN)
if [ -n "$$($1_MANIFEST)" ]; then \
$(SED) -e "s#@@RELEASE@@#$(RELEASE)#" \
@@ -272,46 +221,28 @@
$(PRINTF) "$$($1_EXTRA_MANIFEST_ATTR)\n" >> $$($1_MANIFEST_FILE); \
fi
+if [ -s $$@ ]; then \
- $(RM) -r $$($1_PUBAPI_NOTIFICATIONS_FILE) && \
- $$($1_CAPTURE_PUBAPI_NOTIFICATIONS) \
- if [ -s $$($1_PUBAPI_NOTIFICATIONS_FILE) ]; then \
- $(ECHO) Public api change detected in: && \
- $(CAT) $$($1_PUBAPI_NOTIFICATIONS_FILE) | $(TR) '/' '.' | $(SED) 's|^..||g' | $(SED) 's|\.$$$$||g' | $(AWK) '{print " "$$$$1}' && \
- $$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.api.notify $(FIND_DELETE); true) &&) \
- $(MAKE) -f $(word 1,$(MAKEFILE_LIST)) $$($1_JAR) ; \
- else \
- $(ECHO) Modifying $$($1_NAME) && \
- $$($1_CAPTURE_CONTENTS) \
- $$($1_CAPTURE_METAINF) \
- $(RM) $$($1_DELETES_FILE) && \
- $$($1_CAPTURE_DELETES) \
- $(CAT) $$($1_DELETES_FILE) > $$($1_DELETESS_FILE) && \
- if [ -s $$($1_DELETESS_FILE) ]; then \
- $(ECHO) " deleting" `$(WC) -l $$($1_DELETESS_FILE) | $(AWK) '{ print $$$$1 }'` files && \
- $(ZIP) -q -d $$@ `$(CAT) $$($1_DELETESS_FILE)` ; \
- fi && \
- $$($1_UPDATE_CONTENTS) true && \
- $$($1_JARINDEX) && \
- $$($1_TOUCH_API_FILES) true && \
- $$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.api.notify $(FIND_DELETE); true) &&) true ; \
- fi ; \
+ $(ECHO) Modifying $$($1_NAME) && \
+ $$($1_CAPTURE_CONTENTS) \
+ $$($1_CAPTURE_METAINF) \
+ $(RM) $$($1_DELETES_FILE) && \
+ $$($1_CAPTURE_DELETES) \
+ $(CAT) $$($1_DELETES_FILE) > $$($1_DELETESS_FILE) && \
+ if [ -s $$($1_DELETESS_FILE) ]; then \
+ $(ECHO) " deleting" `$(WC) -l $$($1_DELETESS_FILE) | $(AWK) '{ print $$$$1 }'` files && \
+ $(ZIP) -q -d $$@ `$(CAT) $$($1_DELETESS_FILE)` ; \
+ fi && \
+ $$($1_UPDATE_CONTENTS) true && \
+ $$($1_JARINDEX) && true ; \
else \
$(ECHO) Creating $$($1_NAME) && $(JAR) $$($1_JAR_CREATE_OPTIONS) $$@ $$($1_MANIFEST_FILE) && \
$$($1_SCAPTURE_CONTENTS) \
$$($1_SCAPTURE_METAINF) \
$$($1_SUPDATE_CONTENTS) \
- $$($1_JARINDEX) && \
- $$($1_TOUCH_API_FILES) true && \
- $(RM) -r $$($1_NATIVEAPI_NOTIFICATIONS_FILE) $$($1_NATIVEAPI_FILE) && \
- $$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name "*.notify" $(FIND_DELETE); true) &&) true ; \
+ $$($1_JARINDEX) && true ; \
fi;
endef
-define append_to
- $(ECHO) "$1" >> $2
-endef
-
define SetupZipArchive
# param 1 is for example ZIP_MYSOURCE
# param 2,3,4,5,6,7,8,9 are named args.
@@ -343,7 +274,7 @@
ifneq ($$($1_EXCLUDES),)
$1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
$1_ZIP_EXCLUDES := $$(addprefix -x$(SPACE)$(DQUOTE),$$(addsuffix /*$(DQUOTE),$$($1_EXCLUDES)))
- $1_ALL_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ $1_ALL_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRC))
endif
# Use a slightly shorter name for logging, but with enough path to identify this zip.
@@ -381,7 +312,8 @@
# This macro is used only for properties files that are to be
# copied over to the classes directory in cleaned form:
# Previously this was inconsistently done in different repositories.
-# This is the new clean standard.
+# This is the new clean standard. Though it is to be superseded by
+# a standard annotation processor from with sjavac.
define add_file_to_copy_and_clean
# param 1 = BUILD_MYPACKAGE
# parma 2 = The source file to copy and clean.
@@ -391,109 +323,8 @@
# Now we can setup the depency that will trigger the copying.
$$($1_BIN)$$($2_TARGET) : $2
$(MKDIR) -p $$(@D)
- $(ECHO) Cleaning $$($2_TARGET)
$(CAT) $$< | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' -e 's/#.*/#/g' \
- | $(SED) \
--e 's/\\u0020/\x20/g' \
--e 's/\\u003A/\x3A/g' \
--e 's/\\u006B/\x6B/g' \
--e 's/\\u0075/\x75/g' \
--e 's/\\u00A0/\xA0/g' \
--e 's/\\u00A3/\xA3/g' \
--e 's/\\u00B0/\xB0/g' \
--e 's/\\u00B7/\xB7/g' \
--e 's/\\u00BA/\xBA/g' \
--e 's/\\u00BF/\xBF/g' \
--e 's/\\u00C0/\xC0/g' \
--e 's/\\u00C1/\xC1/g' \
--e 's/\\u00C2/\xC2/g' \
--e 's/\\u00C4/\xC4/g' \
--e 's/\\u00C5/\xC5/g' \
--e 's/\\u00C8/\xC8/g' \
--e 's/\\u00C9/\xC9/g' \
--e 's/\\u00CA/\xCA/g' \
--e 's/\\u00CD/\xCD/g' \
--e 's/\\u00CE/\xCE/g' \
--e 's/\\u00D3/\xD3/g' \
--e 's/\\u00D4/\xD4/g' \
--e 's/\\u00D6/\xD6/g' \
--e 's/\\u00DA/\xDA/g' \
--e 's/\\u00DC/\xDC/g' \
--e 's/\\u00DD/\xDD/g' \
--e 's/\\u00DF/\xDF/g' \
--e 's/\\u00E0/\xE0/g' \
--e 's/\\u00E1/\xE1/g' \
--e 's/\\u00E2/\xE2/g' \
--e 's/\\u00E3/\xE3/g' \
--e 's/\\u00E4/\xE4/g' \
--e 's/\\u00E5/\xE5/g' \
--e 's/\\u00E6/\xE6/g' \
--e 's/\\u00E7/\xE7/g' \
--e 's/\\u00E8/\xE8/g' \
--e 's/\\u00E9/\xE9/g' \
--e 's/\\u00EA/\xEA/g' \
--e 's/\\u00EB/\xEB/g' \
--e 's/\\u00EC/\xEC/g' \
--e 's/\\u00ED/\xED/g' \
--e 's/\\u00EE/\xEE/g' \
--e 's/\\u00EF/\xEF/g' \
--e 's/\\u00F1/\xF1/g' \
--e 's/\\u00F2/\xF2/g' \
--e 's/\\u00F3/\xF3/g' \
--e 's/\\u00F4/\xF4/g' \
--e 's/\\u00F5/\xF5/g' \
--e 's/\\u00F6/\xF6/g' \
--e 's/\\u00F9/\xF9/g' \
--e 's/\\u00FA/\xFA/g' \
--e 's/\\u00FC/\xFC/g' \
--e 's/\\u0020/\x20/g' \
--e 's/\\u003f/\x3f/g' \
--e 's/\\u006f/\x6f/g' \
--e 's/\\u0075/\x75/g' \
--e 's/\\u00a0/\xa0/g' \
--e 's/\\u00a3/\xa3/g' \
--e 's/\\u00b0/\xb0/g' \
--e 's/\\u00ba/\xba/g' \
--e 's/\\u00bf/\xbf/g' \
--e 's/\\u00c1/\xc1/g' \
--e 's/\\u00c4/\xc4/g' \
--e 's/\\u00c5/\xc5/g' \
--e 's/\\u00c8/\xc8/g' \
--e 's/\\u00c9/\xc9/g' \
--e 's/\\u00ca/\xca/g' \
--e 's/\\u00cd/\xcd/g' \
--e 's/\\u00d6/\xd6/g' \
--e 's/\\u00dc/\xdc/g' \
--e 's/\\u00dd/\xdd/g' \
--e 's/\\u00df/\xdf/g' \
--e 's/\\u00e0/\xe0/g' \
--e 's/\\u00e1/\xe1/g' \
--e 's/\\u00e2/\xe2/g' \
--e 's/\\u00e3/\xe3/g' \
--e 's/\\u00e4/\xe4/g' \
--e 's/\\u00e5/\xe5/g' \
--e 's/\\u00e7/\xe7/g' \
--e 's/\\u00e8/\xe8/g' \
--e 's/\\u00e9/\xe9/g' \
--e 's/\\u00ea/\xea/g' \
--e 's/\\u00eb/\xeb/g' \
--e 's/\\u00ec/\xec/g' \
--e 's/\\u00ed/\xed/g' \
--e 's/\\u00ee/\xee/g' \
--e 's/\\u00ef/\xef/g' \
--e 's/\\u00f0/\xf0/g' \
--e 's/\\u00f1/\xf1/g' \
--e 's/\\u00f2/\xf2/g' \
--e 's/\\u00f3/\xf3/g' \
--e 's/\\u00f4/\xf4/g' \
--e 's/\\u00f5/\xf5/g' \
--e 's/\\u00f6/\xf6/g' \
--e 's/\\u00f7/\xf7/g' \
--e 's/\\u00f8/\xf8/g' \
--e 's/\\u00f9/\xf9/g' \
--e 's/\\u00fa/\xfa/g' \
--e 's/\\u00fc/\xfc/g' \
--e 's/\\u00ff/\xff/g' \
+ | $(SED) -f "$(SRC_ROOT)/common/bin/unicode2x.sed" \
| $(SED) -e '/^#/d' -e '/^$$$$/d' \
-e :a -e '/\\$$$$/N; s/\\\n//; ta' \
-e 's/^[ \t]*//;s/[ \t]*$$$$//' \
@@ -504,122 +335,6 @@
$1_ALL_COPY_CLEAN_TARGETS += $$($1_BIN)$$($2_TARGET)
endef
-define add_java_package
- # param 1 = BUILD_MYPACKAGE
- # param 2 = the package target file (_the.package)
- # param 3 = src roots, all of them, separated with space
- # param 4 = bin root
- # param 5 = include these dependecies
- # param 6 = not used
- # param 7 = if non-empty, then use -Xdeps and -Xpubapi
- # param 8 = xremote configuration, or empty.
- # param 9 = javac command
- # param 10 = javac flags
- # param 11 = exclude these files!
- # param 12 = only include these files!
- # param 13 = javah command
- # param 14 = override src roots to be passed into -sourcepath, ugly ugly ugly, do not use this!
- # it is only here to workaround ugly things in the source code in the jdk that ought
- # to be fixed instead!
- ifdef $2_USED_BY
- $$(error Attempting to add the package $2 from $3 which is already added with sources from $$($2_USED_BY))
- endif
- $2_USED_BY:=$3
- # Remove the _the.package file to get the target bin dir for the classes in this package.
- $2_PACKAGE_BDIR:=$(dir $2)
- # The source roots separated with a path separator (: or ; depending on os)
- # (The patsubst is necessary to trim away unnecessary spaces.)
- ifneq ($(14),)
- $2_SRCROOTSC:=$(subst $(SPACE),$(PATH_SEP),$(strip $(patsubst %,%,$(14))))
- else
- $2_SRCROOTSC:=$(subst $(SPACE),$(PATH_SEP),$(strip $(patsubst %,%,$3)))
- endif
- # Suffix the package path to the src roots, to get a list of all possible source locations
- # for this package.
- $2_PACKAGE_SDIRS:=$$(foreach i,$3,$$(subst $4,$$i,$$($2_PACKAGE_BDIR)))
- # Use wildcard in all potential source locations to find the actual sources.
- $2_PACKAGE_SRCS:=$$(filter-out $(11),$$(wildcard $$(addsuffix *.java,$$($2_PACKAGE_SDIRS))))
- ifneq ($(12),)
- # Filter on include file filter if set.
- $2_PACKAGE_SRCS:=$$(filter $(12),$$($2_PACKAGE_SRCS))
- endif
- # Generate a proper package name from the file name.
- $2_PACKAGE:=$(patsubst .%.,%,$(subst /,.,$(subst $4,,$(dir $2))))
- # Use a javac server for this package?
- $2_REMOTE:=$8
-
- # Include previously generated information about what classes are output by this package
- # and what sources were used for the compile.
- -include $$($2_PACKAGE_BDIR)_the.package.d
-
- # Include the notify, file, that exists if the package has been compiled during a previous make round.
- # I.e. we are now dealing with a compile triggered by a pubapi change.
- -include $$($2_PACKAGE_BDIR)_the.package.notify
-
- # If the notify file existed, then $$($2_NOTIFIED) will be equal to true.
- # Use this information to block dependency tracking for this package.
- # This is necessary to cut the circular dependency chains that are so common in Java sources.
-
- ifneq ($$($2_NOTIFIED),true)
- # No need to block, since this package has not yet been recompiled.
- # Thus include previously generated dependency information. (if it exists)
- -include $$($2_PACKAGE_BDIR)_the.package.dddd
-# else
-# $$(info WAS NOTIFIED $2)
- endif
-
- # Should we create proper dependencies between packages?
- ifneq ($7,)
- # The flag: -XDpubapi:file=foo,package=mypack,notify writes a file foo that contains a
- # database of the public api of the classes supplied on the command line and are
- # inside the package mypack. If foo already exists, javac will only write to foo,
- # if there is a change in the pubapi. I.e. we can use the timestamp of this file
- # for triggering dependencies. "notify" means create a "file" suffixed with notify
- # if the pubapi really changed.
- $2_PUBAPI=-XDpubapi=file=$$($2_PACKAGE_BDIR)_the.package.api,notify,package=$$($2_PACKAGE)
- # The flag: -XDnativeapi:file=foo,package=mypack,notify works similar to pubabi, but
- # instead tracks native methods. This file can be used to trigger dependencies for
- # native compilations.
- $2_NATIVEAPI=-XDnativeapi=file=$$($2_PACKAGE_BDIR)_the.package.native,notify,package=$$($2_PACKAGE)
- # The flag -XDdeps:file=foo.deps,groupon=package writes a foo.deps file containing packages dependencies:
- # java.net : java.io java.lang
- # I.e. the classes in .net depend on the public apis of java.io and java.lang
- # The dependencies can be grouped on classes instead (groupon=class)
- # java.net.Bar : java.io.Socket java.lang.String
- $2_DEPS:=-XDdeps=file=$$($2_PACKAGE_BDIR)_the.package.deps,groupon=package
- # The next command rewrites the deps output from javac into a proper makefile dependency.
- # The dependencies are always to an .api file generated by the pubapi option above.
- # This is necessary since java package dependencies are almost always circular.
- $2_APPEND_DEPS:=($(CAT) $$($2_PACKAGE_BDIR)_the.package.deps | $(TR) '.' '/' | $(AWK) '{ print "$4/" $$$$3 }' | sort > $$($2_PACKAGE_BDIR)_the.package.ddd && $(GREP) -f $$($2_PACKAGE_BDIR)_the.package.ddd $5 | $(AWK) '{ print "$(dir $2)_the.package : " $$$$1 "_the.package.api" }' > $$($2_PACKAGE_BDIR)_the.package.dddd ; true)
- else
- # If not using dependencies, use $2 as fallback to trigger regeneration of javah header files.
- # This will generate a surplus of header files, but this does not hurt compilation.
- $2_NATIVEAPICHANGE_TRIGGER:=$2
- $2_FETCH_NATIVEAPICHANGE_CLASSES:=$(CAT) $$($2_PACKAGE_BDIR)_the.package.now|$(GREP) -v '\$$$$'|$(SED) -e 's|$4/||g'|$(SED) 's|.class||g'| $(TR) '/' '.'
- endif
-
- # The _the.package file is dependent on the java files inside the package.
- # Fill the _the.package file with a list of the java files and compile them
- # to class files.
- $2 : $$($2_PACKAGE_SRCS)
- $(MKDIR) -p $$($2_PACKAGE_BDIR)
- $(RM) $2.tmp
- $$(call ListPathsSafely,$2_PACKAGE_SRCS,\n, >> $2.tmp)
- $(ECHO) $$($2_PACKAGE_BDIR)*.class | $(GREP) -v \*.class | $(TR) ' ' '\n' > $$($2_PACKAGE_BDIR)_the.package.prev
- $(RM) $$($2_PACKAGE_BDIR)*.class $$($2_PACKAGE_BDIR)*.notify $$($2_PACKAGE_BDIR)*.deleted
- $(ECHO) Compiling `$(WC) $2.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files in package $(patsubst $4/%/,%,$(dir $2.tmp))
- $9 $$($2_REMOTE) $$($2_DEPS) $$($2_PUBAPI) $$($2_NATIVEAPI) $(10) -implicit:none -sourcepath "$$($2_SRCROOTSC)" -d $4 @$2.tmp
- $(ECHO) $$($2_PACKAGE_BDIR)*.class | $(GREP) -v \*.class | $(TR) ' ' '\n' > $$($2_PACKAGE_BDIR)_the.package.now
- ($(GREP) -xvf $$($2_PACKAGE_BDIR)_the.package.now $$($2_PACKAGE_BDIR)_the.package.prev > $$($2_PACKAGE_BDIR)_the.package.deleted;true)
- $(ECHO) $1_CLASSES += `$(CAT) $$($2_PACKAGE_BDIR)_the.package.now` | \
- $(SED) 's/\$$$$/\$$$$\$$$$/g' > $$($2_PACKAGE_BDIR)_the.package.d
- $(ECHO) $1_JAVAS += $$($2_PACKAGE_SRCS) >> $$($2_PACKAGE_BDIR)_the.package.d
- $(ECHO) $2_NOTIFIED:=true > $$($2_PACKAGE_BDIR)_the.package.notify
- $$($2_APPEND_DEPS)
- $$($2_COPY_FILES)
- $(MV) -f $2.tmp $2
-endef
-
define remove_string
$2 := $$(subst $1,,$$($2))
endef
@@ -664,140 +379,101 @@
$(if $(14),$1_$(strip $(14)))
$(if $(15),$(error Internal makefile error: Too many arguments to SetupJavaCompilation, please update JavaCompilation.gmk))
-# Extract the info from the java compiler setup.
-$1_MODE := $$($$($1_SETUP)_MODE)
-ifneq (SINGLE_THREADED_BATCH,$$($1_MODE))
- ifneq (MULTI_CORE_CONCURRENT,$$($1_MODE))
+ # Extract the info from the java compiler setup.
+ $1_REMOTE := $$($$($1_SETUP)_REMOTE)
+ $1_JVM := $$($$($1_SETUP)_JVM)
+ $1_JAVAC := $$($$($1_SETUP)_JAVAC)
+ $1_FLAGS := $$($$($1_SETUP)_FLAGS) $(JAVAC_FLAGS) $$($1_ADD_JAVAC_FLAGS)
+ ifeq ($$($1_JAVAC),)
$$(error The Java compilation $1 refers to a non-existant java compiler setup $$($1_SETUP))
endif
-endif
-$1_USE_DEPS := $$($$($1_SETUP)_USE_DEPS)
-$1_REMOTE := $$($$($1_SETUP)_REMOTE)
-$1_JVM := $$($$($1_SETUP)_JVM)
-$1_JAVAC := $$($$($1_SETUP)_JAVAC)
-$1_JAVAH := $$($$($1_SETUP)_JAVAH)
-$1_FLAGS := $$($$($1_SETUP)_FLAGS) $(JAVAC_FLAGS) $$($1_ADD_JAVAC_FLAGS)
+
+ # Handle addons and overrides.
+ $1_SRC:=$$(call ADD_SRCS,$$($1_SRC))
+ # Make sure the dirs exist.
+ $$(shell $(MKDIR) -p $$($1_SRC) $$($1_BIN))
+ # Find all files in the source trees.
+ $1_ALL_SRCS := $$(filter-out $(OVR_SRCS),$$(foreach i,$$($1_SRC),$$(shell $(FIND) $$i -type f)))
+ # Extract the java files.
+ ifneq ($$($1_EXCLUDE_FILES),)
+ $1_EXCLUDE_FILES_PATTERN:=$$(addprefix %,$$($1_EXCLUDE_FILES))
+ endif
+ $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$(filter %.java,$$($1_ALL_SRCS)))
+ ifneq ($$($1_INCLUDE_FILES),)
+ $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
+ $1_SRCS := $$(filter $$($1_INCLUDE_FILES), $$($1_SRCS))
+ endif
-# Handle addons and overrides.
-$1_SRC:=$$(call ADD_SRCS,$$($1_SRC))
-# Make sure the dirs exist.
-$$(shell $(MKDIR) -p $$($1_SRC) $$($1_BIN))
-# Find all files in the source trees.
-$1_ALL_SRCS := $$(filter-out $(OVR_SRCS),$$(foreach i,$$($1_SRC),$$(shell $(FIND) $$i -type f)))
-# Extract the java files.
-ifneq ($$($1_EXCLUDE_FILES),)
- $1_EXCLUDE_FILES_PATTERN:=$$(addprefix %,$$($1_EXCLUDE_FILES))
-endif
-$1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$(filter %.java,$$($1_ALL_SRCS)))
-ifneq ($$($1_INCLUDE_FILES),)
- $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
- $1_SRCS := $$(filter $$($1_INCLUDE_FILES), $$($1_SRCS))
-endif
-$1_PKGS := $$(sort $$(dir $$($1_SRCS)))
-# Remove the source root from each found path.
-$$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$1_PKGS)))
-$1_PKGS := $$(sort $$($1_PKGS))
-# There can be only a single bin dir root, no need to foreach over the roots.
-$1_BINS := $$(shell $(FIND) $$($1_BIN) -name "*.class")
+ # Now we have a list of all java files to compile: $$($1_SRCS)
+
+ # Create the corresponding smart javac wrapper command line.
+ $1_SJAVAC_ARGS:=$$(addprefix -x ,$$(addsuffix .*,$$(subst /,.,$$($1_EXCLUDES)))) \
+ $$(addprefix -i ,$$(addsuffix .*,$$(subst /,.,$$($1_INCLUDES)))) \
+ $$(addprefix -xf *,$$(strip $$($1_EXCLUDE_FILES))) \
+ $$(addprefix -if *,$$(strip $$($1_INCLUDE_FILES))) \
+ -src "$$(subst $$(SPACE),$$(PATH_SEP),$$(strip $$($1_SRC)))"
-# Now we have a list of all java files to compile: $$($1_SRCS)
-# and we have a list of all existing class files: $$($1_BINS)
-
-# Create the corresponding smart javac wrapper command line.
-$1_SJAVAC_ARGS:=$$(addprefix -x ,$$(addsuffix .*,$$(subst /,.,$$($1_EXCLUDES)))) \
-$$(addprefix -i ,$$(addsuffix .*,$$(subst /,.,$$($1_INCLUDES)))) \
-$$(addprefix -xf *,$$(strip $$($1_EXCLUDE_FILES))) \
-$$(addprefix -if *,$$(strip $$($1_INCLUDE_FILES))) -src $$(subst $$(SPACE),$$(PATH_SEP),$$(strip $$($1_SRC)))
-
-# Prepend the source/bin path to the filter expressions.
-ifneq ($$($1_INCLUDES),)
- $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
- $1_PKG_INCLUDES := $$(addprefix /,$$(addsuffix /%,$$($1_INCLUDES)))
- $1_BIN_INCLUDES := $$(addprefix $$($1_BIN)/,$$(addsuffix /%,$$($1_INCLUDES)))
- $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
- $1_PKGS := $$(filter $$($1_PKG_INCLUDES),$$($1_PKGS))
- $1_BINS := $$(filter $$($1_BIN_INCLUDES),$$($1_BINS))
-endif
-ifneq ($$($1_EXCLUDES),)
- $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
- $1_PKG_EXCLUDES := $$(addprefix /,$$(addsuffix /%,$$($1_EXCLUDES)))
- $1_BIN_EXCLUDES := $$(addprefix $$($1_BIN)/,$$(addsuffix /%,$$($1_EXCLUDES)))
- $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
- $1_PKGS := $$(filter-out $$($1_PKG_EXCLUDES),$$($1_PKGS))
- $1_BINS := $$(filter-out $$($1_BIN_EXCLUDES),$$($1_BINS))
-endif
+ # Prepend the source/bin path to the filter expressions.
+ ifneq ($$($1_INCLUDES),)
+ $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
+ $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
+ endif
+ ifneq ($$($1_EXCLUDES),)
+ $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
+ $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ endif
-# Find all files to be copied from source to bin.
-ifneq (,$$($1_COPY))
- # Rewrite list of patterns into a find statement.
- $1_COPY_PATTERN:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_COPY))
- # Search for all files to be copied.
- $1_ALL_COPIES := $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i \( $$($1_COPY_PATTERN) \) -a -type f))
- # Copy these explicitly
- $1_ALL_COPIES += $$($1_COPY_FILES)
- # Copy must also respect filters.
- ifneq (,$$($1_INCLUDES))
- $1_ALL_COPIES := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_COPIES))
+ # Find all files to be copied from source to bin.
+ ifneq (,$$($1_COPY))
+ # Rewrite list of patterns into a find statement.
+ $1_COPY_PATTERN:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_COPY))
+ # Search for all files to be copied.
+ $1_ALL_COPIES := $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i \( $$($1_COPY_PATTERN) \) -a -type f))
+ # Copy these explicitly
+ $1_ALL_COPIES += $$($1_COPY_FILES)
+ # Copy must also respect filters.
+ ifneq (,$$($1_INCLUDES))
+ $1_ALL_COPIES := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_COPIES))
+ endif
+ ifneq (,$$($1_EXCLUDES))
+ $1_ALL_COPIES := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_COPIES))
+ endif
+ ifneq (,$$($1_EXCLUDE_FILES))
+ $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_COPIES))
+ endif
+ # All files below META-INF are always copied.
+ $1_ALL_COPIES += $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i/META-INF -type f 2> /dev/null))
+ ifneq (,$$($1_ALL_COPIES))
+ # Yep, there are files to be copied!
+ $1_ALL_COPY_TARGETS:=
+ $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i)))
+ # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files!
+ endif
endif
- ifneq (,$$($1_EXCLUDES))
- $1_ALL_COPIES := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_COPIES))
- endif
- ifneq (,$$($1_EXCLUDE_FILES))
- $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_COPIES))
- endif
- # All files below META-INF are always copied.
- $1_ALL_COPIES += $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i/META-INF -type f 2> /dev/null))
- ifneq (,$$($1_ALL_COPIES))
- # Yep, there are files to be copied!
- $1_ALL_COPY_TARGETS:=
- $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i)))
- # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files!
- endif
-endif
-# Find all property files to be copied and cleaned from source to bin.
-ifneq (,$$($1_CLEAN))
- # Rewrite list of patterns into a find statement.
- $1_CLEAN_PATTERN:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_CLEAN))
- # Search for all files to be copied.
- $1_ALL_CLEANS := $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i \( $$($1_CLEAN_PATTERN) \) -a -type f))
- # Copy and clean must also respect filters.
- ifneq (,$$($1_INCLUDES))
- $1_ALL_CLEANS := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_EXCLUDES))
- $1_ALL_CLEANS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_EXCLUDE_FILES))
- $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_ALL_CLEANS))
- # Yep, there are files to be copied and cleaned!
- $1_ALL_COPY_CLEAN_TARGETS:=
- $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_copy_and_clean,$1,$$i)))
- # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files!
+ # Find all property files to be copied and cleaned from source to bin.
+ ifneq (,$$($1_CLEAN))
+ # Rewrite list of patterns into a find statement.
+ $1_CLEAN_PATTERN:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_CLEAN))
+ # Search for all files to be copied.
+ $1_ALL_CLEANS := $$(foreach i,$$($1_SRC), $$(shell $(FIND) $$i \( $$($1_CLEAN_PATTERN) \) -a -type f))
+ # Copy and clean must also respect filters.
+ ifneq (,$$($1_INCLUDES))
+ $1_ALL_CLEANS := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_EXCLUDES))
+ $1_ALL_CLEANS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_EXCLUDE_FILES))
+ $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_ALL_CLEANS))
+ # Yep, there are files to be copied and cleaned!
+ $1_ALL_COPY_CLEAN_TARGETS:=
+ $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_copy_and_clean,$1,$$i)))
+ # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files!
+ endif
endif
-endif
-
-# Find all the directories that contain java sources, each directory
-# corresponds to a package because we expect the source
-# code to be organized in this standardized way!
-$1_SDIRS := $$(sort $$(dir $$($1_SRCS)))
-# Now prefix each package with the bin root.
-$1_BDIRS := $$(foreach i,$$($1_PKGS),$$(addprefix $$($1_BIN),$$i))
-# Now create a list of the packages that are about to compile. This list is
-# later used to filter out dependencies that point outside of this set.
-$$(shell $(RM) $$($1_BIN)/_the.list_of_packages)
-$$(eval $$(call ListPathsSafelyNow,$1_BDIRS,\n, >> $$($1_BIN)/_the.list_of_packages))
-
-ifeq ($$($1_MODE),SINGLE_THREADED_BATCH)
- # Ok, we will feed all the found java files into a single javac invocation.
- # There can be no dependency checking, nor incremental builds. It is
- # the best we can do with the old javac. If the javac supports a javac server
- # then we can use the javac server.
-
- # We can depend on this target file to trigger a regeneration of all the sources
- $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/_the.batch
# Prep the source paths.
ifneq ($$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE),)
@@ -807,113 +483,73 @@
endif
ifneq (,$$($1_HEADERS))
- $1_HEADERS_ARG := -h $$($1_HEADERS)
+ $1_HEADERS_ARG := -h $$($1_HEADERS)
endif
# Create a sed expression to remove the source roots and to replace / with .
# and remove .java at the end.
$1_REWRITE_INTO_CLASSES:=$$(foreach i,$$($1_SRC),-e 's|$$i/||g') -e 's|/|.|g' -e 's|.java$$$$||g'
- # Here is the batch rules that depends on all the sources.
- $$($1_BIN)/_the.batch: $$($1_SRCS) $$($1_DEPENDS)
- $(MKDIR) -p $$(@D)
- $(RM) $$($1_BIN)/_the.batch $$($1_BIN)/_the.batch.tmp
- $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
- $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files in batch $1
-ifeq ($$($1_NOSJAVAC),)
-ifeq ($$(ENABLE_SJAVAC),yes)
- mkdir -p $$($1_BIN)_sjavac
- $$($1_JVM) $$(word 1,$$($1_JAVAC)) com.sun.tools.javac.smart.Main $$($1_SJAVAC_ARGS) -mfl $$($1_BIN)/_the.batch.tmp -d $$($1_BIN)_sjavac
-endif
-endif
- ($$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) -implicit:none -sourcepath "$$($1_SRCROOTSC)" -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.batch.tmp && \
- $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
-else
- # Ok, we have a modern javac server running!
- # Since a single Java file can generate zero to an infinity number of .class files
- # the exact number and names of the .class files will only be known after the compile.
- # Thus after the compile, a list of the generated classes will be stored in _the.package.d
- # which is included by the makefile during the next compile. These .d files will
- # add the generated class names to the BUILD_MYPACKAGE_CLASSES variable and used java file names
- # to the BUILD_MYPACKAGE_JAVAS variable.
- $1_CLASSES :=
- $1_JAVAS :=
- # Create a file in each package that represents the package dependency.
- # This file (_the.package) will also contain a list of the source files
- # to be compiled for this package.
- $1 := $$(sort $$(patsubst %,%_the.package,$$($1_BDIRS)))
- # Now call add_java_package for each package to create the dependencies.
- $$(foreach p,$$($1),$$(eval $$(call add_java_package,$1,$$p,$$($1_SRC),$$($1_BIN),$$($1_BIN)/_the.list_of_packages,NOTUSED,$$($1_USE_DEPS),$$($1_REMOTE),$$($1_JVM) $$($1_JAVAC),$$($1_FLAGS),$$($1_EXCLUDE_FILES_PATTERN) $(OVR_SRCS),$$($1_INCLUDE_FILES),$$($1_JVM) $$($1_JAVAH),$$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE))))
- # All dependencies are setup, now we only need to depend on $1 (aka $(BUILD_MYPACKAGE))
- # and they will automatically be built!
+ ifeq ($$($1_DISABLE_SJAVAC)x$$(ENABLE_SJAVAC),xyes)
+ # Using sjavac to compile.
+ $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/javac_state
- # Now add on any files to copy targets
- $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1)
- # Remove the set of found classes from the set of all previously known classes
- # and the remainder is the set of missing classes.
- $1_MISSING_CLASSES:=$$(filter-out $$($1_BINS),$$($1_CLASSES))
- $1_PKGS_MISSING_CLASSES:=$$(sort $$(dir $$($1_MISSING_CLASSES)))
- # Remove the set of found java files from the set of all previously known java files
- # the remainder is Java files that have gone missing.
- $1_MISSING_JAVAS:=$$(filter-out $$($1_SRCS),$$($1_JAVAS))
- $1_PKGS_MISSING_JAVAS:=$$(sort $$(dir $$($1_MISSING_JAVAS)))
- # Remove each source root from the found paths.
- $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$1_PKGS_MISSING_JAVAS)))
- # Finally remove duplicates and prefix with the binary path instead.
- $1_PKGS_MISSING_JAVAS:= $$(addprefix $$($1_BIN),$$(sort $$($1_PKGS_MISSING_JAVAS)))
-
- # Remove the set of all theoretical classes from the set of found classes.
- # the remainder is the set of superfluous classes.
- $1_SUPERFLUOUS_CLASSES:=$$(sort $$(filter-out $$($1_CLASSES),$$($1_BINS)))
- $1_PKGS_SUPERFLUOUS_CLASSES:=$$(sort $$(dir $$($1_SUPERFLUOUS_CLASSES)))
+ $$($1_BIN)/javac_state: $$($1_SRCS) $$($1_DEPENDS)
+ $(MKDIR) -p $$(@D)
+ $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
+ $(ECHO) Compiling $1
+ $$($1_JVM) $$(word 1,$$($1_JAVAC)) com.sun.tools.sjavac.Main \
+ $$($1_REMOTE) $$($1_SJAVAC_ARGS) --permit-unidentified-artifacts -mfl $$($1_BIN)/_the.batch.tmp \
+ $$($1_FLAGS) \
+ -implicit:none -d $$($1_BIN) $$($1_HEADERS_ARG)
+ else
+ # Using plain javac to batch compile everything.
+ $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/_the.batch
- # Now delete the _the.package files inside the problematic dirs.
- # This will force a rebuild of these packages!
- $1_FOO:=$$(sort $$($1_PKGS_MISSING_CLASSES) \
- $$($1_PKGS_SUPERFLUOUS_CLASSES) \
- $$($1_PKGS_MISSING_JAVAS))
-# ifneq (,$$($1_FOO))
-# $$(info MESSED UP PACKAGES $$($1_FOO))
-# endif
-
- $$(shell $(RM) $$(addsuffix _the.package,$$(sort $$($1_PKGS_MISSING_CLASSES) \
- $$($1_PKGS_SUPERFLUOUS_CLASSES) \
- $$($1_PKGS_MISSING_JAVAS))))
-
- # Normal makefile dependencies based on timestamps will detect the normal use case
- # when Java files are simply added or modified.
-endif
-
-ifneq (,$$($1_JAR))
-
- ifeq (,$$($1_SUFFIXES))
- $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY)
+ # When not using sjavac, pass along all sources to javac using an @file.
+ $$($1_BIN)/_the.batch: $$($1_SRCS) $$($1_DEPENDS)
+ $(MKDIR) -p $$(@D)
+ $(RM) $$($1_BIN)/_the.batch $$($1_BIN)/_the.batch.tmp
+ $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
+ $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files for $1
+ ($$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) \
+ -implicit:none -sourcepath "$$($1_SRCROOTSC)" \
+ -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.batch.tmp && \
+ $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
endif
- # A jar file was specified. Set it up.
- $$(eval $$(call SetupArchive,ARCHIVE_$1,$$($1),\
- SRCS:=$$($1_BIN),\
- SUFFIXES:=$$($1_SUFFIXES),\
- EXCLUDE:=$$($1_EXCLUDES),\
- INCLUDES:=$$($1_INCLUDES),\
- EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS),\
- JAR:=$$($1_JAR),\
- JARMAIN:=$$($1_JARMAIN),\
- MANIFEST:=$$($1_MANIFEST),\
- EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR),\
- JARINDEX:=$$($1_JARINDEX),\
- HEADERS:=$$($1_HEADERS),\
- SETUP:=$$($1_SETUP)))
-endif
+ # Check if a jar file was specified, then setup the rules for the jar.
+ ifneq (,$$($1_JAR))
+ # If no suffixes was explicitly set for this jar file.
+ # Use class and the cleaned/copied properties file suffixes as the default
+ # for the types of files to be put into the jar.
+ ifeq (,$$($1_SUFFIXES))
+ $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY)
+ endif
-ifneq (,$$($1_SRCZIP))
- # A srczip file was specified. Set it up.
- $$(eval $$(call SetupZipArchive,ARCHIVE_$1,\
+ $$(eval $$(call SetupArchive,ARCHIVE_$1,$$($1),\
+ SRCS:=$$($1_BIN),\
+ SUFFIXES:=$$($1_SUFFIXES),\
+ EXCLUDE:=$$($1_EXCLUDES),\
+ INCLUDES:=$$($1_INCLUDES),\
+ EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS),\
+ JAR:=$$($1_JAR),\
+ JARMAIN:=$$($1_JARMAIN),\
+ MANIFEST:=$$($1_MANIFEST),\
+ EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR),\
+ JARINDEX:=$$($1_JARINDEX),\
+ HEADERS:=$$($1_HEADERS),\
+ SETUP:=$$($1_SETUP)))
+ endif
+
+ # Check if a srczip was specified, then setup the rules for the srczip.
+ ifneq (,$$($1_SRCZIP))
+ $$(eval $$(call SetupZipArchive,ARCHIVE_$1,\
SRC:=$$($1_SRC),\
ZIP:=$$($1_SRCZIP),\
INCLUDES:=$$($1_INCLUDES),\
EXCLUDES:=$$($1_EXCLUDES),\
EXCLUDE_FILES:=$$($1_EXCLUDE_FILES)))
-endif
+ endif
endef
--- a/common/makefiles/MakeBase.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/common/makefiles/MakeBase.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -138,7 +138,7 @@
# Hook to be called as the very first thing when running a normal build
define AtRootMakeStart
- $(if $(findstring -j,$(MAKEFLAGS)), $(error make -j is not supported, use make JOBS=n))
+ $(if $(findstring --jobserver,$(MAKEFLAGS)), $(error make -j is not supported, use make JOBS=n))
$(call PrintStartMessage)
$(call StartTimer)
endef
--- a/common/makefiles/MakeHelpers.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/common/makefiles/MakeHelpers.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -57,9 +57,25 @@
define ParseLogLevel
ifeq ($$(origin VERBOSE),undefined)
# Setup logging according to LOG (but only if VERBOSE is not given)
+
+ # If the "nofile" argument is given, act on it and strip it away
+ ifneq ($$(findstring nofile,$$(LOG)),)
+ # Reset the build log wrapper, regardless of other values
+ override BUILD_LOG_WRAPPER=
+ # COMMA is defined in spec.gmk, but that is not included yet
+ COMMA=,
+ # First try to remove ",nofile" if it exists
+ LOG_STRIPPED1=$$(subst $$(COMMA)nofile,,$$(LOG))
+ # Otherwise just remove "nofile"
+ LOG_STRIPPED2=$$(subst nofile,,$$(LOG_STRIPPED1))
+ # We might have ended up with a leading comma. Remove it
+ LOG_STRIPPED3=$$(strip $$(patsubst $$(COMMA)%,%,$$(LOG_STRIPPED2)))
+ override LOG:=$$(LOG_STRIPPED3)
+ endif
+
ifeq ($$(LOG),)
# Set LOG to "warn" as default if not set (and no VERBOSE given)
- LOG=warn
+ override LOG=warn
endif
ifeq ($$(LOG),warn)
VERBOSE=-s
@@ -182,4 +198,11 @@
$(call CheckEnvironment)
endef
+# Cleans the component given as $1
+define CleanComponent
+ @$(PRINTF) "Cleaning $1 build artifacts ..."
+ @($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)
+ @$(PRINTF) " done\n"
+endef
+
endif # _MAKEHELPERS_GMK
--- a/common/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/common/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -26,6 +26,11 @@
# This must be the first rule
default: all
+# Inclusion of this pseudo-target will cause make to execute this file
+# serially, regardless of -j. Recursively called makefiles will not be
+# affected, however. This is required for correct dependency management.
+.NOTPARALLEL:
+
# Locate this Makefile
ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
@@ -41,18 +46,18 @@
$(eval $(call SetupLogging))
$(eval $(call ParseConfAndSpec))
-# Setup number of jobs to use. -jN is unfortunately not available for us to parse from the command line,
-# hence this workaround.
-ifeq ($(JOBS),)
- JOBS=$(NUM_CORES)
-endif
-
ifneq ($(words $(SPEC)),1)
### We have multiple configurations to build, call make repeatedly
-all jdk hotspot jaxws jaxp corba langtools install images clean dist-clean:
- @$(foreach spec,$(SPEC),($(MAKE) -f $(makefile_path) SPEC=$(spec) $(VERBOSE) VERBOSE=$(VERBOSE) $@ $(MAKE_ARGS)) &&) true
+all clean dist-clean:
+langtools corba jaxp jaxws hotspot jdk images overlay-images install:
+langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only images-only overlay-images-only install-only:
+clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images:
+ @$(foreach spec,$(SPEC),($(MAKE) -f $(makefile_path) SPEC=$(spec) $(VERBOSE) VERBOSE=$(VERBOSE) $@) &&) true
-.PHONY: all jdk hotspot jaxws jaxp corba langtools install images clean dist-clean
+.PHONY: all clean dist-clean
+.PHONY: langtools corba jaxp jaxws hotspot jdk images overlay-images install
+.PHONY: langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only images-only overlay-images-only install-only
+.PHONY: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images
else
### This is the main part of the Makefile, for the normal case with SPEC specifying a single existing spec.gmk file.
@@ -77,77 +82,110 @@
endif
# Remove any javac server logs and port files. This
# prevents a new make run to reuse the previous servers.
-ifneq (,$(JAVAC_SERVERS))
- $(shell mkdir -p $(JAVAC_SERVERS) && rm -rf $(JAVAC_SERVERS)/*)
+ifneq (,$(SJAVAC_SERVER_DIR))
+ $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
endif
# Clean out any notifications from the previous build.
-$(shell find $(OUTPUT_ROOT) -name "_the.*.notify" $(FIND_DELETE))
+$(shell $(FIND) $(OUTPUT_ROOT) -name "_the.*.notify" $(FIND_DELETE))
# Reset the build timers.
$(eval $(call ResetTimers))
+# Setup number of jobs to use. -jN is unfortunately not available for us to parse from the command line,
+# hence this workaround.
+ifeq ($(JOBS),)
+ JOBS=$(NUM_CORES)
+endif
+MAKE_ARGS:=$(MAKE_ARGS) -j$(JOBS)
+
### Main targets
all: jdk
- @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port)
+ @$(if $(SJAVAC_SERVER_DIR),$(RM) -rf $(SJAVAC_SERVER_DIR)/*.port)
@$(call AtRootMakeEnd)
+.PHONY: all
langtools: start-make langtools-only
langtools-only:
@$(call MakeStart,langtools,all)
- @($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS))
+ @($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS))
@$(call MakeFinish,langtools,all)
corba: langtools corba-only
corba-only:
@$(call MakeStart,corba,all)
- @($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS))
+ @($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS))
@$(call MakeFinish,corba,all)
jaxp: langtools jaxp-only
jaxp-only:
@$(call MakeStart,jaxp,all)
- @($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS))
+ @($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS))
@$(call MakeFinish,jaxp,all)
jaxws: langtools jaxp jaxws-only
jaxws-only:
@$(call MakeStart,jaxws,all)
- @($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS))
+ @($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS))
@$(call MakeFinish,jaxws,all)
hotspot: langtools hotspot-only
hotspot-only:
@$(call MakeStart,hotspot,all)
- @($(CD) $(HOTSPOT_TOPDIR)/make && $(BUILD_LOG_WRAPPER) $(MAKE) -j1 $(HOTSPOT_MAKE_ARGS) $(MAKE_ARGS))
+ @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
@$(call MakeFinish,hotspot,all)
jdk: langtools corba jaxp jaxws hotspot jdk-only
jdk-only:
@$(call MakeStart,jdk,all)
- @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(MAKE_ARGS))
+ @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) $(JDK_TARGET))
@$(call MakeFinish,jdk,all)
images: source-tips start-make jdk langtools corba jaxp jaxws hotspot images-only
images-only:
@$(call MakeStart,jdk-images,$@)
- @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(JDK_MAKE_ARGS) $(MAKE_ARGS) images)
+ @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) images)
@$(call MakeFinish,jdk-images,$@)
- @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port)
+ @$(if $(SJAVAC_SERVER_DIR),$(RM) -rf $(SJAVAC_SERVER_DIR)/*.port)
+ @$(call AtRootMakeEnd)
+
+overlay-images: source-tips start-make jdk langtools corba jaxp jaxws hotspot overlay-images-only
+overlay-images-only:
+ @$(call MakeStart,jdk-overlay-images,$@)
+ @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) overlay-images)
+ @$(call MakeFinish,jdk-overlay-images,$@)
+ @$(if $(SJAVAC_SERVER_DIR),$(RM) -rf $(SJAVAC_SERVER_DIR)/*.port)
@$(call AtRootMakeEnd)
install: source-tips start-make jdk langtools corba jaxp jaxws hotspot install-only
install-only:
@$(call MakeStart,jdk-images,$@)
- @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) -j$(JOBS) $(JDK_MAKE_ARGS) $(MAKE_ARGS) install)
+ @($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) install)
@$(call MakeFinish,jdk-images,$@)
- @$(if $(JAVAC_SERVERS),rm -rf $(JAVAC_SERVERS)/*.port)
+ @$(if $(SJAVAC_SERVER_DIR),$(RM) -rf $(SJAVAC_SERVER_DIR)/*.port)
@$(call AtRootMakeEnd)
+docs: start-make jdk docs-only
+docs-only:
+ @$(call MakeStart,docs,$@)
+ @($(CD) $(SRC_ROOT)/common/makefiles/javadoc && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f Javadoc.gmk docs)
+ @$(call MakeFinish,docs,$@)
+ @$(if $(SJAVAC_SERVER_DIR),$(RM) -rf $(SJAVAC_SERVER_DIR)/*.port)
+ @$(call AtRootMakeEnd)
+
+
+.PHONY: langtools corba jaxp jaxws hotspot jdk images install
+.PHONY: langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only images-only install-only
+
start-make:
@$(call AtRootMakeStart)
+.PHONY: start-make
-.PHONY: jdk hotspot jaxws jaxp corba langtools install images start-make
+bootcycle-images:
+ @$(ECHO) Boot cycle build step 1: Building the JDK image normally
+ @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(SPEC) images)
+ @$(ECHO) Boot cycle build step 2: Building a new JDK image using previously built image
+ @($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(dir $(SPEC))bootcycle-spec.gmk images)
test: start-make
@$(call MakeStart,test,$(if $(TEST),$(TEST),all))
@@ -167,8 +205,8 @@
# Remove everything, except the output from configure.
-clean:
- @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v spec.sh | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | grep -v "localdevenv.*" | grep -v uncygdrive.exe`)
+clean: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images clean-bootcycle-build
+ @($(CD) $(OUTPUT_ROOT) && $(RM) -r tmp source_tips build.log*)
@$(ECHO) Cleaned everything except the build configuration.
.PHONY: clean
@@ -178,11 +216,24 @@
@$(ECHO) Cleaned everything, you will have to re-run configure.
.PHONY: dist-clean
+clean-langtools:
+ $(call CleanComponent,langtools)
+clean-corba:
+ $(call CleanComponent,corba)
+clean-jaxp:
+ $(call CleanComponent,jaxp)
+clean-jaxws:
+ $(call CleanComponent,jaxws)
+clean-hotspot:
+ $(call CleanComponent,hotspot)
clean-jdk:
- @(cd $(OUTPUT_ROOT) && $(RM) -r `$(LS) $(OUTPUT_ROOT) | grep -v spec.gmk | grep -v spec.sh | grep -v Makefile | grep -v config.status | grep -v config.log | grep -v config.h | grep -v configure-arguments | \
- grep -v langtools | grep -v corba | grep -v jaxp | grep -v jaxws | grep -v hotspot`)
- @$(ECHO) "Cleaned jdk build artifacts (but not langtools,corba,jaxp,jaxws,hotspot nor the build configuration)"
-.PHONY: clean
+ $(call CleanComponent,jdk)
+clean-images:
+ $(call CleanComponent,images)
+clean-bootcycle-build:
+ $(call CleanComponent,bootcycle-build)
+
+.PHONY: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images
endif
@@ -195,24 +246,39 @@
$(info =====================)
$(info )
$(info Common make targets)
- $(info . make [all] # Compile all code but do not create images)
- $(info . make images # Create complete j2sdk and j2re images)
- $(info . make install # Install the generated images locally)
- $(info . make clean # Remove all files generated by make, but not those generated by configure)
- $(info . make dist-clean # Remove all files generated by both make and configure)
- $(info . make help # Give some help on using make)
- $(info . make test # Run tests, default is all tests (see TEST below))
+ $(info . make [all] # Compile all code but do not create images)
+ $(info . make images # Create complete j2sdk and j2re images)
+ $(info . make overlay-images # Create limited images for sparc 64 bit platforms)
+ $(info . make bootcycle-images # Build images twice, second time with newly build JDK)
+ $(info . make install # Install the generated images locally)
+ $(info . make clean # Remove all files generated by make, but not those)
+ $(info . # generated by configure)
+ $(info . make dist-clean # Remove all files, including configuration)
+ $(info . make help # Give some help on using make)
+ $(info . make test # Run tests, default is all tests (see TEST below))
+ $(info )
+ $(info Targets for specific components)
+ $(info (Component is any of langtools, corba, jaxp, jaxws, hotspot, jdk or images))
+ $(info . make <component> # Build <component> and everything it depends on. )
+ $(info . make <component>-only # Build <component> only, without dependencies. This)
+ $(info . # is faster but can result in incorrect build results!)
+ $(info . make clean-<component> # Remove files generated by make for <component>)
$(info )
$(info Useful make variables)
- $(info . make CONF= # Build all configurations (note, assignment is empty))
- $(info . make CONF=<substring> # Build the configuration(s) with a name matching the given substring)
+ $(info . make CONF= # Build all configurations (note, assignment is empty))
+ $(info . make CONF=<substring> # Build the configuration(s) with a name matching)
+ $(info . # <substring>)
$(info )
- $(info . make LOG=<loglevel> # Change loglevel from warn (default) to the given loglevel)
- $(info . # Available loglevels are: warn, info, debug and trace)
- $(info . # To see executed command lines, use LOG=info)
+ $(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>)
+ $(info . # Available log levels are:)
+ $(info . # 'warn' (default), 'info', 'debug' and 'trace')
+ $(info . # To see executed command lines, use LOG=info)
$(info )
- $(info . make test TEST=<test> # Only run the given test or tests, e.g.)
- $(info . # make test TEST="jdk_lang jdk_net")
+ $(info . make JOBS=<n> # Run <n> parallel make jobs)
+ $(info . # Note that -jN does not work as expected!)
+ $(info )
+ $(info . make test TEST=<test> # Only run the given test or tests, e.g.)
+ $(info . # make test TEST="jdk_lang jdk_net")
$(info )
.PHONY: help
FRC: # Force target
--- a/common/makefiles/NativeCompilation.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/common/makefiles/NativeCompilation.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -55,22 +55,22 @@
ifneq (,$$(filter %.c,$2))
# Compile as a C file
- $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -c
+ $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.m,$2))
# Compile as a objective-c file
- $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -c
+ $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$5
$1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
else ifneq (,$$(filter %.s,$2))
# Compile as assembler file
- $1_$2_FLAGS=$8
+ $1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
$1_$2_COMP=$(AS)
$1_$2_DEP_FLAG:=
else
# Compile as a C++ file
- $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -c
+ $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
$1_$2_COMP=$7
$1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
endif
@@ -98,7 +98,6 @@
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
endif
ifeq ($(COMPILER_TYPE),CL)
- $$(call COMPILING_MSG,$$(notdir $2))
$$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEBUG_OUT_FLAGS) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
endif
endif
@@ -129,6 +128,7 @@
# DEBUG_SYMBOLS add debug symbols (if configured on)
# CC the compiler to use, default is $(CC)
# LDEXE the linker to use for linking executables, default is $(LDEXE)
+ # OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
$(if $2,$1_$(strip $2))
$(if $3,$1_$(strip $3))
$(if $4,$1_$(strip $4))
@@ -149,7 +149,11 @@
$(if $(19),$1_$(strip $(19)))
$(if $(20),$1_$(strip $(20)))
$(if $(21),$1_$(strip $(21)))
- $(if $(22),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
+ $(if $(22),$1_$(strip $(22)))
+ $(if $(23),$1_$(strip $(23)))
+ $(if $(24),$1_$(strip $(24)))
+ $(if $(25),$1_$(strip $(25)))
+ $(if $(26),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
ifneq (,$$($1_BIN))
$$(error BIN has been replaced with OBJECT_DIR)
@@ -315,6 +319,17 @@
$1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
endif
+ ifneq (,$$($1_DEBUG_SYMBOLS))
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
+ # Programs don't get the debug symbols added in the old build. It's not clear if
+ # this is intentional.
+ ifeq ($$($1_PROGRAM),)
+ $1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
+ $1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
+ endif
+ endif
+ endif
+
ifeq ($$($1_CXXFLAGS),)
$1_CXXFLAGS:=$$($1_CFLAGS)
endif
@@ -327,40 +342,20 @@
$1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER)
endif
- ifneq (no, $(ENABLE_DEBUG_SYMBOLS))
- ifneq ($(OPENJDK_TARGET_OS), solaris)
-# <weird code />
-# There is very weird code in Defs-solaris.gmk that first sets variables as decribed below
-# and then a couple of hundreds of line below resets them...
-# this feels like a sure bug...but before this is confirmed, mimic this behaviour
-# (note: skip indenting this as it will surely be removed anyway)
-# <weird code />
-
- ifneq (,$$($1_DEBUG_SYMBOLS))
- $1_OPTIMIZATION := LOW
- $1_EXTRA_CFLAGS += $(CFLAGS_DEBUG_SYMBOLS)
- $1_EXTRA_CXXFLAGS += $(CXXFLAGS_DEBUG_SYMBOLS)
- endif
-
-# <weird code />
- endif
-# <weird code />
- endif
-
ifeq (NONE, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $$(C_O_FLAG_NONE)
- $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_NONE)
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_NONE)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NONE)
else ifeq (LOW, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $$(C_O_FLAG_NORM)
- $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_NORM)
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_NORM)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NORM)
else ifeq (HIGH, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $$(C_O_FLAG_HI)
- $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_HI)
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_HI)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HI)
else ifeq (HIGHEST, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $$(C_O_FLAG_HIGHEST)
- $1_EXTRA_CXXFLAGS += $$(CXX_O_FLAG_HIGHEST)
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_HIGHEST)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HIGHEST)
else ifneq (, $$($1_OPTIMIZATION))
- $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
+ $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
endif
# Now create a list of the packages that are about to compile. Used when sending source
@@ -375,7 +370,7 @@
$$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX),$$($1_ASFLAGS))))
# On windows we need to create a resource file
- ifeq ($(OPENJDK_TARGET_OS_API), winapi)
+ ifeq ($(OPENJDK_TARGET_OS), windows)
ifneq (,$$($1_VERSIONINFO_RESOURCE))
$1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
$$($1_RES): $$($1_VERSIONINFO_RESOURCE)
@@ -409,8 +404,8 @@
endif
endif
- # Pickup extra OPENJDK_TARGET_OS_API dependent variables (posix or winapi) and
- # (linux,solaris,windows,bsd) for LDFLAGS and LDFLAGS_SUFFIX
+ # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables
+ # for LDFLAGS and LDFLAGS_SUFFIX
$1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS))
$1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS))
ifneq (,$$($1_REAL_MAPFILE))
@@ -432,9 +427,10 @@
"-map:$$($1_OBJECT_DIR)/$$($1_LIBRARY).map"
endif
- $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
+ ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
+ $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
$(CP) $$< $$@
-
+ endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
# gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
@@ -509,8 +505,10 @@
"-map:$$($1_OBJECT_DIR)/$$($1_PROGRAM).map"
endif
- $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
+ ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
+ $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
$(CP) $$< $$@
+ endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
# gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/makefiles/javadoc/CORE_PKGS.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,293 @@
+#
+# Copyright (c) 2001, 2011, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# EXCLUDE_PKGS is the list of packages to exclude from the
+# Java API Specification. Do not add these to CORE_PKGS.
+# The concatenation of EXCLUDE_PKGS and CORE_PKGS
+# should make up the list of all packages under the
+# src/shared/classes directory of the JDK source tree.
+#
+EXCLUDE_PKGS = \
+ java.awt.peer \
+ java.awt.dnd.peer \
+ sun.* \
+ com.sun.* \
+ org.apache.* \
+ org.jcp.* \
+ org.w3c.dom.css \
+ org.w3c.dom.html \
+ org.w3c.dom.stylesheets \
+ org.w3c.dom.traversal \
+ org.w3c.dom.ranges \
+ org.w3c.dom.views \
+ org.omg.stub.javax.management.remote.rmi
+
+#
+# ACTIVE_JSR_PKGS are packages that are part of an active JSR process--
+# one that is doing its own review. These packages are not included when
+# creating diff pages for the platform's JCP process.
+#
+# (see /java/pubs/apisrc/jdk/6.0/beta/make/docs/active_jsr_pkgs)
+# Note:
+# This is a list of regular expressions. So foo.* matches "foo" and "foo.bar".
+#
+ACTIVE_JSR_PKGS= \
+ java.lang.invoke \
+ java.sql \
+ javax.activation \
+ javax.annotation.* \
+ javax.jws.* \
+ javax.lang.* \
+ javax.management.* \
+ javax.script \
+ javax.sql.* \
+ javax.tools.* \
+ javax.xml.* \
+ org.w3c.* \
+ org.xml.sax
+
+#
+# CORE_PKGS is the list of packages that form the
+# Java API Specification.
+#
+### ***IMPORTANT NOTE***
+### There is also a "REGEXP" variable in the docs/makefile that
+### determines which table the packages go in on the main page.
+### Currently, there is only table ("Platform Packages") and
+### everything goes in it, so REGEXP is "*". But if that policy
+### changes, packages added will need to be reflected in that
+### list of wildcard expressions, as well.
+###
+CORE_PKGS = \
+ java.applet \
+ java.awt \
+ java.awt.color \
+ java.awt.datatransfer \
+ java.awt.dnd \
+ java.awt.event \
+ java.awt.font \
+ java.awt.geom \
+ java.awt.im \
+ java.awt.im.spi \
+ java.awt.image \
+ java.awt.image.renderable \
+ java.awt.print \
+ java.beans \
+ java.beans.beancontext \
+ java.io \
+ java.lang \
+ java.lang.annotation \
+ java.lang.instrument \
+ java.lang.invoke \
+ java.lang.management \
+ java.lang.ref \
+ java.lang.reflect \
+ java.math \
+ java.net \
+ java.nio \
+ java.nio.channels \
+ java.nio.channels.spi \
+ java.nio.charset \
+ java.nio.charset.spi \
+ java.nio.file \
+ java.nio.file.attribute \
+ java.nio.file.spi \
+ java.rmi \
+ java.rmi.activation \
+ java.rmi.dgc \
+ java.rmi.registry \
+ java.rmi.server \
+ java.security \
+ java.security.acl \
+ java.security.cert \
+ java.security.interfaces \
+ java.security.spec \
+ java.sql \
+ java.text \
+ java.text.spi \
+ java.util \
+ java.util.concurrent \
+ java.util.concurrent.atomic \
+ java.util.concurrent.locks \
+ java.util.jar \
+ java.util.logging \
+ java.util.prefs \
+ java.util.regex \
+ java.util.spi \
+ java.util.zip \
+ javax.accessibility \
+ javax.activation \
+ javax.activity \
+ javax.annotation \
+ javax.annotation.processing \
+ javax.crypto \
+ javax.crypto.interfaces \
+ javax.crypto.spec \
+ javax.imageio \
+ javax.imageio.event \
+ javax.imageio.metadata \
+ javax.imageio.plugins.jpeg \
+ javax.imageio.plugins.bmp \
+ javax.imageio.spi \
+ javax.imageio.stream \
+ javax.jws \
+ javax.jws.soap \
+ javax.lang.model \
+ javax.lang.model.element \
+ javax.lang.model.type \
+ javax.lang.model.util \
+ javax.management \
+ javax.management.loading \
+ javax.management.monitor \
+ javax.management.relation \
+ javax.management.openmbean \
+ javax.management.timer \
+ javax.management.modelmbean \
+ javax.management.remote \
+ javax.management.remote.rmi \
+ javax.naming \
+ javax.naming.directory \
+ javax.naming.event \
+ javax.naming.ldap \
+ javax.naming.spi \
+ javax.net \
+ javax.net.ssl \
+ javax.print \
+ javax.print.attribute \
+ javax.print.attribute.standard \
+ javax.print.event \
+ javax.rmi \
+ javax.rmi.CORBA \
+ javax.rmi.ssl \
+ javax.script \
+ javax.security.auth \
+ javax.security.auth.callback \
+ javax.security.auth.kerberos \
+ javax.security.auth.login \
+ javax.security.auth.spi \
+ javax.security.auth.x500 \
+ javax.security.cert \
+ javax.security.sasl \
+ javax.sound.sampled \
+ javax.sound.sampled.spi \
+ javax.sound.midi \
+ javax.sound.midi.spi \
+ javax.sql \
+ javax.sql.rowset \
+ javax.sql.rowset.serial \
+ javax.sql.rowset.spi \
+ javax.swing \
+ javax.swing.border \
+ javax.swing.colorchooser \
+ javax.swing.filechooser \
+ javax.swing.event \
+ javax.swing.table \
+ javax.swing.text \
+ javax.swing.text.html \
+ javax.swing.text.html.parser \
+ javax.swing.text.rtf \
+ javax.swing.tree \
+ javax.swing.undo \
+ javax.swing.plaf \
+ javax.swing.plaf.basic \
+ javax.swing.plaf.metal \
+ javax.swing.plaf.multi \
+ javax.swing.plaf.nimbus \
+ javax.swing.plaf.synth \
+ javax.tools \
+ javax.tools.annotation \
+ javax.transaction \
+ javax.transaction.xa \
+ javax.xml.parsers \
+ javax.xml.bind \
+ javax.xml.bind.annotation \
+ javax.xml.bind.annotation.adapters \
+ javax.xml.bind.attachment \
+ javax.xml.bind.helpers \
+ javax.xml.bind.util \
+ javax.xml.soap \
+ javax.xml.ws \
+ javax.xml.ws.handler \
+ javax.xml.ws.handler.soap \
+ javax.xml.ws.http \
+ javax.xml.ws.soap \
+ javax.xml.ws.spi \
+ javax.xml.ws.spi.http \
+ javax.xml.ws.wsaddressing \
+ javax.xml.transform \
+ javax.xml.transform.sax \
+ javax.xml.transform.dom \
+ javax.xml.transform.stax \
+ javax.xml.transform.stream \
+ javax.xml \
+ javax.xml.crypto \
+ javax.xml.crypto.dom \
+ javax.xml.crypto.dsig \
+ javax.xml.crypto.dsig.dom \
+ javax.xml.crypto.dsig.keyinfo \
+ javax.xml.crypto.dsig.spec \
+ javax.xml.datatype \
+ javax.xml.validation \
+ javax.xml.namespace \
+ javax.xml.xpath \
+ javax.xml.stream \
+ javax.xml.stream.events \
+ javax.xml.stream.util \
+ org.ietf.jgss \
+ org.omg.CORBA \
+ org.omg.CORBA.DynAnyPackage \
+ org.omg.CORBA.ORBPackage \
+ org.omg.CORBA.TypeCodePackage \
+ org.omg.stub.java.rmi \
+ org.omg.CORBA.portable \
+ org.omg.CORBA_2_3 \
+ org.omg.CORBA_2_3.portable \
+ org.omg.CosNaming \
+ org.omg.CosNaming.NamingContextExtPackage \
+ org.omg.CosNaming.NamingContextPackage \
+ org.omg.SendingContext \
+ org.omg.PortableServer \
+ org.omg.PortableServer.CurrentPackage \
+ org.omg.PortableServer.POAPackage \
+ org.omg.PortableServer.POAManagerPackage \
+ org.omg.PortableServer.ServantLocatorPackage \
+ org.omg.PortableServer.portable \
+ org.omg.PortableInterceptor \
+ org.omg.PortableInterceptor.ORBInitInfoPackage \
+ org.omg.Messaging \
+ org.omg.IOP \
+ org.omg.IOP.CodecFactoryPackage \
+ org.omg.IOP.CodecPackage \
+ org.omg.Dynamic \
+ org.omg.DynamicAny \
+ org.omg.DynamicAny.DynAnyPackage \
+ org.omg.DynamicAny.DynAnyFactoryPackage \
+ org.w3c.dom \
+ org.w3c.dom.events \
+ org.w3c.dom.bootstrap \
+ org.w3c.dom.ls \
+ org.xml.sax \
+ org.xml.sax.ext \
+ org.xml.sax.helpers
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/makefiles/javadoc/Javadoc.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,1184 @@
+# Copyright (c) 1997, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+include $(SPEC)
+include MakeBase.gmk
+
+.SUFFIXES: # Delete the default suffixes
+.SUFFIXES: .java
+
+#
+# Definitions for $(DOCSDIR), $(MKDIR), $(BINDIR), etc.
+#
+
+CLASSPATH_SEPARATOR = :
+
+DOCSDIR=$(OUTPUT_ROOT)/docs
+TEMPDIR=$(OUTPUT_ROOT)/docstemp
+
+JDK_SHARE_SRC=$(JDK_TOPDIR)/src/share
+JDK_SHARE_CLASSES=$(JDK_SHARE_SRC)/classes
+
+JDK_IMPSRC = $(JDK_OUTPUTDIR)/impsrc
+
+JDK_GENSRC = $(JDK_OUTPUTDIR)/gensrc
+
+HOTSPOT_DOCS_IMPORT_PATH=$(HOTSPOT_OUTPUTDIR)/docs
+
+BUILD_NUMBER=$(JDK_BUILD_NUMBER)
+
+BOOT_JAVA_CMD=$(JAVA)
+
+# Langtools
+JAVAC_JAR = $(LANGTOOLS_DIST)/bootstrap/lib/javac.jar
+JAVADOC_JAR = $(LANGTOOLS_DIST)/bootstrap/lib/javadoc.jar
+DOCLETS_JAR = $(LANGTOOLS_DIST)/bootstrap/lib/doclets.jar
+JAVADOC_CMD = $(BOOT_JAVA_CMD) \
+ -Xmx1024m \
+ -Djava.awt.headless=true \
+ "-Xbootclasspath/p:$(JAVADOC_JAR)$(CLASSPATH_SEPARATOR)$(JAVAC_JAR)$(CLASSPATH_SEPARATOR)$(DOCLETS_JAR)" \
+ -jar $(JAVADOC_JAR)
+
+JAVADOC_CMD = javadoc
+
+# Copyright year for beginning of Java and some of the apis
+# (Needed when creating the javadocs)
+FIRST_COPYRIGHT_YEAR = 1993
+DOMAPI_FIRST_COPYRIGHT_YEAR = 2005
+MIRROR_FIRST_COPYRIGHT_YEAR = 2004
+DOCLETAPI_FIRST_COPYRIGHT_YEAR = 1993
+TAGLETAPI_FIRST_COPYRIGHT_YEAR = 1993
+JDI_FIRST_COPYRIGHT_YEAR = 1999
+JAAS_FIRST_COPYRIGHT_YEAR = 1998
+JGSS_FIRST_COPYRIGHT_YEAR = 2000
+SMARTCARDIO_FIRST_COPYRIGHT_YEAR = 2005
+HTTPSERVER_FIRST_COPYRIGHT_YEAR = 2005
+MGMT_FIRST_COPYRIGHT_YEAR = 2003
+ATTACH_FIRST_COPYRIGHT_YEAR = 2005
+JCONSOLE_FIRST_COPYRIGHT_YEAR = 2006
+SCTPAPI_FIRST_COPYRIGHT_YEAR = 2009
+TRACING_FIRST_COPYRIGHT_YEAR = 2008
+TREEAPI_FIRST_COPYRIGHT_YEAR = 2005
+JNLP_FIRST_COPYRIGHT_YEAR = 1998
+PLUGIN2_FIRST_COPYRIGHT_YEAR = 2007
+
+# Oracle name
+FULL_COMPANY_NAME = Oracle and/or its affiliates
+
+# Copyright address
+COMPANY_ADDRESS = 500 Oracle Parkway<br>Redwood Shores, CA 94065 USA.
+
+# The trademark symbol
+TRADEMARK = ™
+
+# Common copyright lines used
+# The word "Copyright" might optionally be a link to the file cpyr.html.
+# The first year of copyright may vary or not be available.
+# The address to the company might be optional.
+COMMA:= ,
+EMPTY:=
+SPACE:=$(EMPTY) $(EMPTY)
+COPYRIGHT_SYMBOL = &\#x00a9;
+# Macro to construct the copyright line
+# (The GNU make 3.78.1 "if" conditional is broken, fixed in GNU make 3.81)
+define CopyrightLine # optionalurl optionalfirstyear optionaladdress
+$(if $(strip $1),<a href="$(strip $1)">Copyright</a>,Copyright) \
+$(COPYRIGHT_SYMBOL) $(if $2,$2${COMMA},) $(COPYRIGHT_YEAR),\
+$(FULL_COMPANY_NAME). $3 All rights reserved.
+endef
+
+# Url to root of documents
+DOCSDIR_URL = {@docroot}/$(GET2DOCSDIR)
+
+# Url to copyright html file
+COPYRIGHT_URL-7 = $(DOCSDIR_URL)/legal/cpyr.html
+COPYRIGHT_URL-8 = $(DOCSDIR_URL)/legal/cpyr.html
+COPYRIGHT_URL = $(COPYRIGHT_URL-$(JDK_MINOR_VERSION))
+
+# Url to bug filing site
+BUG_SUBMIT_URL = http://bugreport.sun.com/bugreport/
+
+# Common line for how to submit a bug or rfe
+BUG_SUBMIT_LINE = <a href="$(BUG_SUBMIT_URL)">Submit a bug or feature</a>
+
+# Url to devdocs page
+# Was: http://java.sun.com/javase/6/webnotes/devdocs-vs-specs.html
+DEV_DOCS_URL-7 = http://download.oracle.com/javase/7/docs/index.html
+DEV_DOCS_URL-8 = http://download.oracle.com/javase/7/docs/index.html
+DEV_DOCS_URL = $(DEV_DOCS_URL-$(JDK_MINOR_VERSION))
+DOCS_BASE_URL = http://download.oracle.com/javase/7/docs
+
+# Common Java trademark line
+JAVA_TRADEMARK_LINE = Java is a trademark or registered trademark of \
+$(FULL_COMPANY_NAME) in the US and other countries.
+
+#################################################################
+# Macros:
+
+
+# List of all possible directories for javadoc to look for sources
+# NOTE: Quotes are required around sourcepath argument only on Windows.
+# Otherwise, you get "No packages or classes specified." due
+# to $(CLASSPATH_SEPARATOR) being interpreted as an end of
+# command (newline or shell ; character)
+ALL_SOURCE_DIRS = $(JDK_IMPSRC) \
+ $(JDK_GENSRC) \
+ $(JDK_SHARE_CLASSES) \
+ $(JDK_TOPDIR)/src/solaris/classes \
+ $(JDK_TOPDIR)/src/windows/classes \
+ $(JDK_SHARE_SRC)/doc/stub
+
+# List of directories that actually exist
+ALL_EXISTING_SOURCE_DIRS := $(wildcard $(ALL_SOURCE_DIRS))
+
+# List with classpath separator between them
+EMPTY:=
+SPACE:= $(EMPTY) $(EMPTY)
+RELEASEDOCS_SOURCEPATH = \
+ $(subst $(SPACE),$(CLASSPATH_SEPARATOR),$(strip $(ALL_SOURCE_DIRS)))
+
+define prep-target
+$(MKDIR) -p $(@D)
+$(RM) $@
+endef
+
+# Prep for javadoc creation, assumes $@ is an index.html file
+define prep-javadoc
+@if [ -f "$@" -a "$?" != "" ] ; then \
+ $(ECHO) "# Dependencies have changed: $?"; \
+fi
+$(RM) -r $(@D)
+$(MKDIR) -p $(@D)
+endef
+
+# A cache of the directories in ALL_SOURCE_DIRS
+DIRECTORY_CACHE = $(DOCSTMPDIR)/directory.cache
+
+# Given a list of packages, return a list of files or dirs to be dependent on
+# (Currently only returning a list of directories)
+define PackageDependencies # packages
+$(shell \
+ if [ "$1" != "" -a -f $(DIRECTORY_CACHE) ] ; then \
+ for p in $1 ; do \
+ pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
+ $(CAT) $(DIRECTORY_CACHE) | $(GREP) "/$${pd}/" ; \
+ done; \
+ fi \
+)
+endef
+
+# Given a list of packages, add packages that exist to $@, print summary
+define PackageFilter # packages
+@if [ "$1" != "" ] ; then \
+ for p in $1 ; do \
+ pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
+ found="false"; \
+ for cp in $(ALL_SOURCE_DIRS) ; do \
+ if [ -d $${cp}/$${pd} ] ; then \
+ $(ECHO) "$${p}" >> $@; \
+ found="true"; \
+ break; \
+ fi; \
+ done; \
+ if [ "$${found}" = "false" ] ; then \
+ $(ECHO) "WARNING: Package not found: $${p}"; \
+ fi; \
+ done; \
+fi
+endef
+
+# Print out a summary of the javadoc command about to be run
+define JavadocSummary # optionsfile packagesfile
+@$(ECHO) "# Summary for $@";\
+ $(ECHO) "# Options (`$(BASENAME) $1`):"; $(SED) -e 's@^@# @' $1; \
+ $(ECHO) "# Packages (`$(BASENAME) $2`):";$(SED) -e 's@^@# @' $2
+endef
+
+#
+# Temporary directory for javadoc creation
+#
+DOCSTMPDIR = $(TEMPDIR)/doctmp
+
+#
+# Different api directories created from root directory
+#
+COREAPI_DOCSDIR = $(DOCSDIR)/api
+JDK_API_DOCSDIR = $(DOCSDIR)/jdk/api
+JRE_API_DOCSDIR = $(DOCSDIR)/jre/api
+PLATFORM_DOCSDIR = $(DOCSDIR)/platform
+
+# The non-core api javadocs need to be able to access the root of the core
+# api directory, so for jdk/api or jre/api to get to the core api/
+# directory we would use this:
+JDKJRE2COREAPI = ../../api
+
+# Common bottom argument
+define CommonBottom # year
+<font size="-1"><br> $(call CopyrightLine,,$1,)</font>
+endef
+
+# Common trademark bottom argument (Not sure why this is used sometimes)
+define CommonTrademarkBottom # year
+<font size="-1">\
+$(BUG_SUBMIT_LINE)<br>$(JAVA_TRADEMARK_LINE)<br>\
+$(call CopyrightLine,,$1,$(COMPANY_ADDRESS))\
+</font>
+endef
+
+# Common echo of option
+define OptionOnly # opt
+$(PRINTF) "%s\n" "$1"
+endef
+define OptionPair # opt arg
+$(PRINTF) "%s '%s'\n" "$1" '$2'
+endef
+define OptionTrip # opt arg arg
+$(PRINTF) "%s '%s' '%s'\n" "$1" '$2' '$3'
+endef
+
+# Core api bottom argument (with special sauce)
+COREAPI_BOTTOM = <font size="-1"> $(BUG_SUBMIT_LINE)\
+<br>For further API reference and developer documentation, \
+see <a href="$(DEV_DOCS_URL)" target="_blank">Java SE Documentation</a>. \
+That documentation contains more detailed, developer-targeted descriptions, \
+with conceptual overviews, definitions of terms, workarounds, \
+and working code examples.<br>\
+$(call CopyrightLine,$(COPYRIGHT_URL),$(FIRST_COPYRIGHT_YEAR),)\
+</font>
+
+# Common javadoc options used by all
+COMMON_JAVADOCFLAGS = \
+ -XDignore.symbol.file=true \
+ -quiet \
+ -use \
+ -keywords \
+ $(ADDITIONAL_JAVADOCFLAGS)
+
+ifdef OPENJDK
+ ADDITIONAL_JAVADOCFLAGS = \
+ -Xdocrootparent $(DOCS_BASE_URL)
+else
+ ADDITIONAL_JAVADOCFLAGS =
+endif
+
+# Draft used for non-fcs documents
+DRAFT_HEADER =
+ifneq ($(MILESTONE), fcs)
+ DRAFT_HEADER = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
+ DRAFT_BOTTOM = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
+ DRAFT_WINTITLE = $(BUILD_NUMBER)
+ # Early access top text (not used in FCS releases)
+ COREAPI_TOP_EARLYACCESS = \
+<div style="background-color: \#EEEEEE"> \
+<div style="padding: 6px; margin-top: 2px; margin-bottom: 6px; \
+margin-left: 6px; margin-right: 6px; text-align: justify; \
+font-size: 80%; font-family: Helvetica, Arial, sans-serif; \
+font-weight: normal;"> \
+Please note that the specifications and other information \
+contained herein are not final and are subject to change. \
+The information is being made available to you solely for purpose of \
+evaluation. \
+</div> </div>
+endif
+
+#################################################################
+
+#
+# CORE_PKGS environment variable has been moved to the following file
+#
+include CORE_PKGS.gmk
+
+#
+# Load environment variables for API package names that are not part of
+# the Java SE platform
+#
+include NON_CORE_PKGS.gmk
+
+#################################################################
+
+#
+# Default target is same as docs target, create core api and all others it can
+#
+
+all: docs
+docs: coredocs otherdocs
+
+#################################################################
+# Production Targets -- USE THESE TARGETS WHEN:
+# a) You're generating docs outside of release engineering's
+# standard control build.
+# b) The docs will be pushed to the web and/or included in
+# the downloaded doc bundle.
+#
+# See: Notes.html#releaseTargets
+# Note: Spaces precede ifdef/ifndef indents. Tabs precede target commands (!)
+#
+
+sanitycheckcoredocs:
+ @$(ECHO) ""
+ @$(ECHO) "Building core api docs with these values:"
+ @$(ECHO) " BUILD_NUMBER = $(BUILD_NUMBER)"
+ @$(ECHO) " MILESTONE = $(MILESTONE)"
+ @$(ECHO) ""
+ ifeq ($(BUILD_NUMBER), b00)
+ @$(ECHO) "ERROR: Build number must be defined"
+ @$(ECHO) "MILESTONE is set to $(MILESTONE)"
+ @$(ECHO) ""
+ exit 1
+ endif
+
+#############################################################
+#
+# coredocs
+#
+COREAPI_DOCTITLE = Java$(TRADEMARK) Platform, Standard Edition \
+$(JDK_MINOR_VERSION)<br>API Specification
+COREAPI_WINDOWTITLE = Java Platform SE $(JDK_MINOR_VERSION)
+COREAPI_HEADER = \
+<strong>Java$(TRADEMARK) Platform<br>Standard Ed. $(JDK_MINOR_VERSION)</strong>
+
+# Java language specification cite
+TAG_JLS = jls:a:See <cite> \
+The Java™ Language Specification</cite>:
+
+# Overview file for core apis
+COREAPI_OVERVIEW = $(JDK_SHARE_CLASSES)/overview-core.html
+
+# The index.html, options, and packages files
+COREAPI_INDEX_FILE = $(COREAPI_DOCSDIR)/index.html
+COREAPI_OPTIONS_FILE = $(DOCSTMPDIR)/coredocs.options
+COREAPI_PACKAGES_FILE = $(DOCSTMPDIR)/coredocs.packages
+
+coredocs: $(COREAPI_INDEX_FILE)
+
+# Set relative location to core api document root
+$(COREAPI_INDEX_FILE): GET2DOCSDIR=..
+
+# Run javadoc if the index file is out of date or missing
+$(COREAPI_INDEX_FILE): $(COREAPI_OPTIONS_FILE) $(COREAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(COREAPI_OPTIONS_FILE),$(COREAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(COREAPI_OPTIONS_FILE) @$(COREAPI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(COREAPI_OPTIONS_FILE): $(COREAPI_OVERVIEW)
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ISO-8859-1) ; \
+ $(call OptionPair,-tag,beaninfo:X) ; \
+ $(call OptionPair,-tag,revised:X) ; \
+ $(call OptionPair,-tag,since.unbundled:X) ; \
+ $(call OptionPair,-tag,spec:X) ; \
+ $(call OptionPair,-tag,specdefault:X) ; \
+ $(call OptionPair,-tag,Note:X) ; \
+ $(call OptionPair,-tag,ToDo:X) ; \
+ $(call OptionPair,-tag,$(TAG_JLS)) ; \
+ $(call OptionOnly,-splitIndex) ; \
+ $(call OptionPair,-overview,$(COREAPI_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(COREAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(COREAPI_WINDOWTITLE) $(DRAFT_WINTITLE)) ;\
+ $(call OptionPair,-header,$(COREAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(COREAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ ) >> $@
+ifdef COREAPI_TOP_EARLYACCESS
+ @$(call OptionPair,-top,$(COREAPI_TOP_EARLYACCESS)) >> $@
+endif
+
+# Create a file with the package names in it
+$(COREAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(CORE_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(CORE_PKGS))
+
+#############################################################
+#
+# docletapidocs
+#
+
+ALL_OTHER_TARGETS += docletapidocs
+
+DOCLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/doclet
+DOCLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+DOCLETAPI_DOCTITLE := Doclet API
+DOCLETAPI_WINDOWTITLE := Doclet API
+DOCLETAPI_HEADER := <strong>Doclet API</strong>
+DOCLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOCLETAPI_FIRST_COPYRIGHT_YEAR))
+DOCLETAPI_GROUPNAME := Packages
+DOCLETAPI_REGEXP := com.sun.javadoc
+# DOCLETAPI_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+DOCLETAPI_INDEX_FILE = $(DOCLETAPI_DOCDIR)/index.html
+DOCLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/docletapi.options
+DOCLETAPI_PACKAGES_FILE = $(DOCSTMPDIR)/docletapi.packages
+
+docletapidocs: $(DOCLETAPI_INDEX_FILE)
+
+# Set relative location to core api document root
+$(DOCLETAPI_INDEX_FILE): GET2DOCSDIR=$(DOCLETAPI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(DOCLETAPI_INDEX_FILE): $(DOCLETAPI_OPTIONS_FILE) $(DOCLETAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(DOCLETAPI_OPTIONS_FILE),$(DOCLETAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(DOCLETAPI_OPTIONS_FILE) @$(DOCLETAPI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(DOCLETAPI_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-breakiterator) ; \
+ $(call OptionPair,-doctitle,$(DOCLETAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(DOCLETAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(DOCLETAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(DOCLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-group,$(DOCLETAPI_GROUPNAME),$(DOCLETAPI_REGEXP)); \
+ $(call OptionTrip,-linkoffline,$(DOCLETAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(DOCLETAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(DOCLETAPI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(DOCLETAPI_PKGS))
+
+#############################################################
+#
+# tagletapidocs
+#
+
+ALL_OTHER_TARGETS += tagletapidocs
+TAGLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/taglet
+TAGLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+TAGLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(TAGLETAPI_FIRST_COPYRIGHT_YEAR))
+# TAGLETAPI_FILE is located in NON_CORE_PKGS.gmk
+
+# Temporary directory (special generation rules)
+TAGLETAPI_TEMPDIR = $(DOCSTMPDIR)/taglets_temp
+
+# The index.html, options, and packages files
+TAGLETAPI_INDEX_FILE = $(TAGLETAPI_DOCDIR)/com/sun/tools/doclets/Taglet.html
+TAGLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/tagletapi.options
+TAGLETAPI_PACKAGES_FILE = $(DOCSTMPDIR)/tagletapi.packages
+
+tagletapidocs: $(TAGLETAPI_INDEX_FILE)
+
+# Set relative location to core api document root
+$(TAGLETAPI_INDEX_FILE): GET2DOCSDIR=$(TAGLETAPI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(TAGLETAPI_INDEX_FILE): $(TAGLETAPI_OPTIONS_FILE) $(TAGLETAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(RM) -r $(TAGLETAPI_TEMPDIR)
+ $(MKDIR) -p $(TAGLETAPI_TEMPDIR)
+ $(call JavadocSummary,$(TAGLETAPI_OPTIONS_FILE),$(TAGLETAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(TAGLETAPI_TEMPDIR) \
+ @$(TAGLETAPI_OPTIONS_FILE) @$(TAGLETAPI_PACKAGES_FILE)
+ cp -r $(TAGLETAPI_TEMPDIR)/com $(@D)
+ cp $(TAGLETAPI_TEMPDIR)/stylesheet.css $(@D)
+ $(RM) -r $(TAGLETAPI_TEMPDIR)
+
+# Create file with javadoc options in it
+$(TAGLETAPI_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nonavbar) ; \
+ $(call OptionOnly,-noindex) ; \
+ $(call OptionPair,-bottom,$(TAGLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(TAGLETAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(TAGLETAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(TAGLETAPI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(TAGLETAPI_PKGS))
+ $(GREP) "$(TAGLETAPI_FILE)" $@ > $@.tmp
+ $(MV) $@.tmp $@
+
+#############################################################
+#
+# domapidocs
+#
+
+ALL_OTHER_TARGETS += domapidocs
+
+DOMAPI_DOCDIR := $(JRE_API_DOCSDIR)/plugin/dom
+DOMAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+DOMAPI_DOCTITLE := Common DOM API
+DOMAPI_WINDOWTITLE := Common DOM API
+DOMAPI_HEADER := <strong>Common DOM API</strong>
+DOMAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOMAPI_FIRST_COPYRIGHT_YEAR))
+DOMAPI_GROUPNAME := Packages
+DOMAPI_REGEXP := com.sun.java.browser.dom:org.w3c.dom*
+# DOMAPI_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+DOMAPI_INDEX_FILE = $(DOMAPI_DOCDIR)/index.html
+DOMAPI_OPTIONS_FILE = $(DOCSTMPDIR)/domapi.options
+DOMAPI_PACKAGES_FILE = $(DOCSTMPDIR)/domapi.packages
+
+domapidocs: $(DOMAPI_INDEX_FILE)
+
+# Set relative location to core api document root
+$(DOMAPI_INDEX_FILE): GET2DOCSDIR=$(DOMAPI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(DOMAPI_INDEX_FILE): $(DOMAPI_OPTIONS_FILE) $(DOMAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(DOMAPI_OPTIONS_FILE),$(DOMAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(DOMAPI_OPTIONS_FILE) @$(DOMAPI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(DOMAPI_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-splitIndex) ; \
+ $(call OptionPair,-doctitle,$(DOMAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(DOMAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(DOMAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(DOMAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-group,$(DOMAPI_GROUPNAME),$(DOMAPI_REGEXP)); \
+ $(call OptionTrip,-linkoffline,$(DOMAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(DOMAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(DOMAPI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(DOMAPI_PKGS))
+
+#############################################################
+#
+# jpdadocs
+#
+
+ALL_OTHER_TARGETS += jpdadocs
+
+jpdadocs: jdidocs jdwpdocs jvmtidocs
+
+#############################################################
+#
+# jdidocs
+#
+
+ALL_OTHER_TARGETS += jdidocs
+
+JDI_DOCDIR := $(JDK_API_DOCSDIR)/jpda/jdi
+JDI2COREAPI := ../../$(JDKJRE2COREAPI)
+JDI_DOCTITLE := Java$(TRADEMARK) Debug Interface
+JDI_WINDOWTITLE := Java Debug Interface
+JDI_HEADER := <strong>Java Debug Interface</strong>
+JDI_BOTTOM := $(call CommonBottom,$(JDI_FIRST_COPYRIGHT_YEAR))
+JDI_OVERVIEW := $(JDK_SHARE_CLASSES)/jdi-overview.html
+# JDI_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+JDI_INDEX_FILE = $(JDI_DOCDIR)/index.html
+JDI_OPTIONS_FILE = $(DOCSTMPDIR)/jdi.options
+JDI_PACKAGES_FILE = $(DOCSTMPDIR)/jdi.packages
+
+jdidocs: $(JDI_INDEX_FILE)
+
+# Set relative location to core api document root
+$(JDI_INDEX_FILE): GET2DOCSDIR=$(JDI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(JDI_INDEX_FILE): $(JDI_OPTIONS_FILE) $(JDI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(JDI_OPTIONS_FILE),$(JDI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(JDI_OPTIONS_FILE) @$(JDI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(JDI_OPTIONS_FILE): $(JDI_OVERVIEW)
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-overview,$(JDI_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JDI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(JDI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(JDI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JDI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(JDI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(JDI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JDI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(JDI_PKGS))
+
+#############################################################
+#
+# jdwpdocs
+#
+
+ALL_OTHER_TARGETS += jdwpdocs
+
+JDWP_DOCDIR = $(PLATFORM_DOCSDIR)/jpda/jdwp
+
+jdwpdocs: $(JDWP_DOCDIR)/jdwp-protocol.html
+$(JDWP_DOCDIR)/jdwp-protocol.html : $(JDK_OUTPUTDIR)/gensrc_jdwp_doc/jdwp-protocol.html
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(CP) $< $@
+
+#############################################################
+#
+# jvmtidocs
+#
+
+ALL_OTHER_TARGETS += jvmtidocs
+
+JVMTI_DOCDIR = $(PLATFORM_DOCSDIR)/jvmti
+JVMTI_HTML = $(HOTSPOT_DIST)/docs/platform/jvmti/jvmti.html
+
+jvmtidocs: $(JVMTI_DOCDIR)/jvmti.html
+$(JVMTI_DOCDIR)/jvmti.html:
+ @$(prep-javadoc)
+ @if [ -f $(JVMTI_HTML) ] ; then \
+ $(ECHO) "$(CP) $(JVMTI_HTML) $@"; \
+ $(CP) $(JVMTI_HTML) $@; \
+ else \
+ $(ECHO) "WARNING: Generated file does not exist: $(JVMTI_HTML)"; \
+ fi
+
+#############################################################
+#
+# jaasdocs
+#
+
+ALL_OTHER_TARGETS += jaasdocs
+
+JAAS_DOCDIR := $(JRE_API_DOCSDIR)/security/jaas/spec
+JAAS2COREAPI := ../../../$(JDKJRE2COREAPI)
+JAAS_DOCTITLE := Java$(TRADEMARK) Authentication and Authorization Service
+JAAS_WINDOWTITLE := Java Authentication and Authorization Service
+JAAS_HEADER := <strong>Java Authentication and Authorization Service</strong>
+JAAS_BOTTOM := $(call CommonBottom,$(JAAS_FIRST_COPYRIGHT_YEAR))
+# JAAS_PKGS is located in NON_CORE_PKGS.gmk
+JAAS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/auth/jaas-overview.html
+
+# The index.html, options, and packages files
+JAAS_INDEX_FILE = $(JAAS_DOCDIR)/index.html
+JAAS_OPTIONS_FILE = $(DOCSTMPDIR)/jaas.options
+JAAS_PACKAGES_FILE = $(DOCSTMPDIR)/jaas.packages
+
+jaasdocs: $(JAAS_INDEX_FILE)
+
+# Set relative location to core api document root
+$(JAAS_INDEX_FILE): GET2DOCSDIR=$(JAAS2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(JAAS_INDEX_FILE): $(JAAS_OPTIONS_FILE) $(JAAS_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(JAAS_OPTIONS_FILE),$(JAAS_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(JAAS_OPTIONS_FILE) @$(JAAS_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(JAAS_OPTIONS_FILE): $(JAAS_OVERVIEW)
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-overview,$(JAAS_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JAAS_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(JAAS_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(JAAS_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JAAS_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(JAAS2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(JAAS_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JAAS_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(JAAS_PKGS))
+
+#############################################################
+#
+# jgssdocs
+#
+
+ALL_OTHER_TARGETS += jgssdocs
+
+JGSS_DOCDIR := $(JRE_API_DOCSDIR)/security/jgss/spec
+JGSS2COREAPI := ../../../$(JDKJRE2COREAPI)
+JGSS_DOCTITLE := Java$(TRADEMARK) GSS-API Utilities
+JGSS_WINDOWTITLE := Java GSS-API Utilities
+JGSS_HEADER := <strong>Java GSS-API Utilities</strong>
+JGSS_BOTTOM := $(call CommonBottom,$(JGSS_FIRST_COPYRIGHT_YEAR))
+JGSS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/jgss/jgss-overview.html
+# JGSS_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+JGSS_INDEX_FILE = $(JGSS_DOCDIR)/index.html
+JGSS_OPTIONS_FILE = $(DOCSTMPDIR)/jgss.options
+JGSS_PACKAGES_FILE = $(DOCSTMPDIR)/jgss.packages
+
+jgssdocs: $(JGSS_INDEX_FILE)
+
+# Set relative location to core api document root
+$(JGSS_INDEX_FILE): GET2DOCSDIR=$(JGSS2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(JGSS_INDEX_FILE): $(JGSS_OPTIONS_FILE) $(JGSS_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(JGSS_OPTIONS_FILE),$(JGSS_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(JGSS_OPTIONS_FILE) @$(JGSS_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(JGSS_OPTIONS_FILE): $(JGSS_OVERVIEW)
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-overview,$(JGSS_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JGSS_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(JGSS_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(JGSS_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JGSS_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(JGSS2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(JGSS_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JGSS_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(JGSS_PKGS))
+
+#############################################################
+#
+# smartcardiodocs
+#
+
+ALL_OTHER_TARGETS += smartcardiodocs
+
+SMARTCARDIO_DOCDIR := $(JRE_API_DOCSDIR)/security/smartcardio/spec
+SMARTCARDIO2COREAPI := ../../../$(JDKJRE2COREAPI)
+SMARTCARDIO_DOCTITLE := Java$(TRADEMARK) Smart Card I/O
+SMARTCARDIO_WINDOWTITLE := Java Smart Card I/O
+SMARTCARDIO_HEADER := <strong>Java Smart Card I/O</strong>
+SMARTCARDIO_BOTTOM := $(call CommonBottom,$(SMARTCARDIO_FIRST_COPYRIGHT_YEAR))
+# SMARTCARDIO_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+SMARTCARDIO_INDEX_FILE = $(SMARTCARDIO_DOCDIR)/index.html
+SMARTCARDIO_OPTIONS_FILE = $(DOCSTMPDIR)/smartcardio.options
+SMARTCARDIO_PACKAGES_FILE = $(DOCSTMPDIR)/smartcardio.packages
+
+smartcardiodocs: $(SMARTCARDIO_INDEX_FILE)
+
+# Set relative location to core api document root
+$(SMARTCARDIO_INDEX_FILE): GET2DOCSDIR=$(SMARTCARDIO2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(SMARTCARDIO_INDEX_FILE): $(SMARTCARDIO_OPTIONS_FILE) $(SMARTCARDIO_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(SMARTCARDIO_OPTIONS_FILE),$(SMARTCARDIO_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(SMARTCARDIO_OPTIONS_FILE) @$(SMARTCARDIO_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(SMARTCARDIO_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(SMARTCARDIO_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(SMARTCARDIO_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(SMARTCARDIO_HEADER)$(DRAFT_HEADER)); \
+ $(call OptionPair,-bottom,$(SMARTCARDIO_BOTTOM)$(DRAFT_BOTTOM)); \
+ $(call OptionTrip,-linkoffline,$(SMARTCARDIO2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(SMARTCARDIO_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(SMARTCARDIO_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(SMARTCARDIO_PKGS))
+
+#############################################################
+#
+# httpserverdocs
+#
+
+ALL_OTHER_TARGETS += httpserverdocs
+
+HTTPSERVER_DOCDIR := $(JRE_API_DOCSDIR)/net/httpserver/spec
+HTTPSERVER2COREAPI := ../../../$(JDKJRE2COREAPI)
+HTTPSERVER_DOCTITLE := Java$(TRADEMARK) HTTP Server
+HTTPSERVER_WINDOWTITLE := Java HTTP Server
+HTTPSERVER_HEADER := <strong>Java HTTP Server</strong>
+HTTPSERVER_BOTTOM := $(call CommonBottom,$(HTTPSERVER_FIRST_COPYRIGHT_YEAR))
+# HTTPSERVER_PKGS is located in NON_CORE_PKGS.gmk
+
+HTTPSERVER_INDEX_HTML = $(HTTPSERVER_DOCDIR)/index.html
+HTTPSERVER_OPTIONS_FILE = $(DOCSTMPDIR)/httpserver.options
+HTTPSERVER_PACKAGES_FILE = $(DOCSTMPDIR)/httpserver.packages
+
+httpserverdocs: $(HTTPSERVER_INDEX_HTML)
+
+# Set relative location to core api document root
+$(HTTPSERVER_INDEX_HTML): GET2DOCSDIR=$(HTTPSERVER2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(HTTPSERVER_INDEX_HTML): $(HTTPSERVER_OPTIONS_FILE) $(HTTPSERVER_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(HTTPSERVER_OPTIONS_FILE),$(HTTPSERVER_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(HTTPSERVER_OPTIONS_FILE) @$(HTTPSERVER_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(HTTPSERVER_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(HTTPSERVER_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(HTTPSERVER_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(HTTPSERVER_HEADER)$(DRAFT_HEADER)); \
+ $(call OptionPair,-bottom,$(HTTPSERVER_BOTTOM)$(DRAFT_BOTTOM)); \
+ $(call OptionTrip,-linkoffline,$(HTTPSERVER2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(HTTPSERVER_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(HTTPSERVER_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(HTTPSERVER_PKGS))
+
+#############################################################
+#
+# mgmtdocs
+#
+
+ALL_OTHER_TARGETS += mgmtdocs
+
+MGMT_DOCDIR := $(JRE_API_DOCSDIR)/management/extension
+MGMT2COREAPI := ../../$(JDKJRE2COREAPI)
+JVM_MIB_NAME := JVM-MANAGEMENT-MIB.mib
+JVM_MIB_SRC := $(CLOSED_SRC)/share/classes/sun/management/snmp/$(JVM_MIB_NAME)
+MGMT_DOCTITLE := Monitoring and Management Interface for the Java$(TRADEMARK) Platform
+MGMT_WINDOWTITLE := Monitoring and Management Interface for the Java Platform
+MGMT_HEADER := <strong>Monitoring and Management Interface for the Java Platform</strong>
+MGMT_BOTTOM := $(call CommonBottom,$(MGMT_FIRST_COPYRIGHT_YEAR))
+MGMT_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/management/mgmt-overview.html
+# MGMT_PKGS is located in NON_CORE_PKGS.gmk
+
+# The index.html, options, and packages files
+MGMT_INDEX_FILE = $(MGMT_DOCDIR)/index.html
+MGMT_OPTIONS_FILE = $(DOCSTMPDIR)/mgmt.options
+MGMT_PACKAGES_FILE = $(DOCSTMPDIR)/mgmt.packages
+
+mgmtdocs: $(MGMT_INDEX_FILE)
+
+# Set relative location to core api document root
+$(MGMT_INDEX_FILE): GET2DOCSDIR=$(MGMT2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(MGMT_INDEX_FILE): $(MGMT_OPTIONS_FILE) $(MGMT_PACKAGES_FILE)
+ $(prep-javadoc)
+ @if [ -f $(JVM_MIB_SRC) ] ; then \
+ $(ECHO) "$(CP) $(JVM_MIB_SRC) $(@D)/.."; \
+ $(CP) $(JVM_MIB_SRC) $(@D)/.. ; \
+ else \
+ $(ECHO) "WARNING: File $(JVM_MIB_NAME) not available."; \
+ fi
+ $(call JavadocSummary,$(MGMT_OPTIONS_FILE),$(MGMT_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(MGMT_OPTIONS_FILE) @$(MGMT_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(MGMT_OPTIONS_FILE): $(MGMT_OVERVIEW)
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-overview,$(MGMT_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(MGMT_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(MGMT_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(MGMT_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(MGMT_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(MGMT2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(MGMT_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(MGMT_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(MGMT_PKGS))
+
+#############################################################
+#
+# attachdocs
+#
+
+ALL_OTHER_TARGETS += attachdocs
+
+ATTACH_DOCDIR := $(JDK_API_DOCSDIR)/attach/spec
+ATTACH2COREAPI := ../../$(JDKJRE2COREAPI)
+ATTACH_DOCTITLE := Attach API
+ATTACH_WINDOWTITLE := Attach API
+ATTACH_HEADER := <strong>Attach API</strong>
+ATTACH_BOTTOM := $(call CommonBottom,$(ATTACH_FIRST_COPYRIGHT_YEAR))
+# ATTACH_PKGS is located in NON_CORE_PKGS.gmk
+
+ATTACH_INDEX_HTML = $(ATTACH_DOCDIR)/index.html
+ATTACH_OPTIONS_FILE = $(DOCSTMPDIR)/attach.options
+ATTACH_PACKAGES_FILE = $(DOCSTMPDIR)/attach.packages
+
+attachdocs: $(ATTACH_INDEX_HTML)
+
+# Set relative location to core api document root
+$(ATTACH_INDEX_HTML): GET2DOCSDIR=$(ATTACH2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(ATTACH_INDEX_HTML): $(ATTACH_OPTIONS_FILE) $(ATTACH_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(ATTACH_OPTIONS_FILE),$(ATTACH_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(ATTACH_OPTIONS_FILE) @$(ATTACH_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(ATTACH_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(ATTACH_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(ATTACH_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(ATTACH_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(ATTACH_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(ATTACH2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(ATTACH_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(ATTACH_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(ATTACH_PKGS))
+
+#############################################################
+#
+# jconsoledocs
+#
+
+ALL_OTHER_TARGETS += jconsoledocs
+
+JCONSOLE_DOCDIR := $(JDK_API_DOCSDIR)/jconsole/spec
+JCONSOLE2COREAPI := ../../$(JDKJRE2COREAPI)
+JCONSOLE_DOCTITLE := JConsole API
+JCONSOLE_WINDOWTITLE := JConsole API
+JCONSOLE_HEADER := <strong>JConsole API</strong>
+JCONSOLE_BOTTOM := $(call CommonBottom,$(JCONSOLE_FIRST_COPYRIGHT_YEAR))
+# JCONSOLE_PKGS is located in NON_CORE_PKGS.gmk
+
+JCONSOLE_INDEX_HTML = $(JCONSOLE_DOCDIR)/index.html
+JCONSOLE_OPTIONS_FILE = $(DOCSTMPDIR)/jconsole.options
+JCONSOLE_PACKAGES_FILE = $(DOCSTMPDIR)/jconsole.packages
+
+jconsoledocs: $(JCONSOLE_INDEX_HTML)
+
+# Set relative location to core api document root
+$(JCONSOLE_INDEX_HTML): GET2DOCSDIR=$(JCONSOLE2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(JCONSOLE_INDEX_HTML): $(JCONSOLE_OPTIONS_FILE) $(JCONSOLE_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(JCONSOLE_OPTIONS_FILE),$(JCONSOLE_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(JCONSOLE_OPTIONS_FILE) @$(JCONSOLE_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(JCONSOLE_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(JCONSOLE_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(JCONSOLE_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(JCONSOLE_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JCONSOLE_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(JCONSOLE2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(JCONSOLE_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JCONSOLE_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(JCONSOLE_PKGS))
+
+#############################################################
+#
+# treeapidocs
+#
+
+ALL_OTHER_TARGETS += treeapidocs
+
+TREEAPI_DOCDIR := $(JDK_API_DOCSDIR)/javac/tree
+TREEAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+TREEAPI_DOCTITLE := Compiler Tree API
+TREEAPI_WINDOWTITLE := Compiler Tree API
+TREEAPI_HEADER := <strong>Compiler Tree API</strong>
+TREEAPI_BOTTOM := $(call CommonBottom,$(TREEAPI_FIRST_COPYRIGHT_YEAR))
+TREEAPI_GROUPNAME := Packages
+TREEAPI_REGEXP := com.sun.source.*
+# TREEAPI_PKGS is located in NON_CORE_PKGS.gmk
+
+TREEAPI_INDEX_HTML = $(TREEAPI_DOCDIR)/index.html
+TREEAPI_OPTIONS_FILE = $(DOCSTMPDIR)/treeapi.options
+TREEAPI_PACKAGES_FILE = $(DOCSTMPDIR)/treeapi.packages
+
+treeapidocs: $(TREEAPI_INDEX_HTML)
+
+# Set relative location to core api document root
+$(TREEAPI_INDEX_HTML): GET2DOCSDIR=$(TREEAPI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(TREEAPI_INDEX_HTML): $(TREEAPI_OPTIONS_FILE) $(TREEAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(TREEAPI_OPTIONS_FILE),$(TREEAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(TREEAPI_OPTIONS_FILE) @$(TREEAPI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(TREEAPI_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-doctitle,$(TREEAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(TREEAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(TREEAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-tag,$(TAG_JLS)) ; \
+ $(call OptionPair,-bottom,$(TREEAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-group,$(TREEAPI_GROUPNAME),$(TREEAPI_REGEXP)); \
+ $(call OptionTrip,-linkoffline,$(TREEAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(TREEAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(TREEAPI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(TREEAPI_PKGS))
+
+#############################################################
+#
+# sctpdocs
+#
+
+ALL_OTHER_TARGETS += sctpdocs
+
+SCTPAPI_DOCDIR := $(JRE_API_DOCSDIR)/nio/sctp/spec
+SCTPAPI2COREAPI := ../../../$(JDKJRE2COREAPI)
+SCTPAPI_DOCTITLE := SCTP API
+SCTPAPI_WINDOWTITLE := SCTP API
+SCTPAPI_HEADER := <strong>SCTP API</strong>
+SCTPAPI_BOTTOM := $(call CommonBottom,$(SCTPAPI_FIRST_COPYRIGHT_YEAR))
+# SCTPAPI_PKGS is located in NON_CORE_PKGS.gmk
+
+SCTPAPI_INDEX_HTML = $(SCTPAPI_DOCDIR)/index.html
+SCTPAPI_OPTIONS_FILE = $(DOCSTMPDIR)/sctp.options
+SCTPAPI_PACKAGES_FILE = $(DOCSTMPDIR)/sctp.packages
+
+sctpdocs: $(SCTPAPI_INDEX_HTML)
+
+# Set relative location to core api document root
+$(SCTPAPI_INDEX_HTML): GET2DOCSDIR=$(SCTPAPI2COREAPI)/..
+
+# Run javadoc if the index file is out of date or missing
+$(SCTPAPI_INDEX_HTML): $(SCTPAPI_OPTIONS_FILE) $(SCTPAPI_PACKAGES_FILE)
+ $(prep-javadoc)
+ $(call JavadocSummary,$(SCTPAPI_OPTIONS_FILE),$(SCTPAPI_PACKAGES_FILE))
+ $(JAVADOC_CMD) -d $(@D) \
+ @$(SCTPAPI_OPTIONS_FILE) @$(SCTPAPI_PACKAGES_FILE)
+
+# Create file with javadoc options in it
+$(SCTPAPI_OPTIONS_FILE):
+ $(prep-target)
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(SCTPAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(SCTPAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ $(call OptionPair,-header,$(SCTPAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(SCTPAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionTrip,-linkoffline,$(SCTPAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
+ ) >> $@
+
+# Create a file with the package names in it
+$(SCTPAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(SCTPAPI_PKGS))
+ $(prep-target)
+ $(call PackageFilter,$(SCTPAPI_PKGS))
+
+#############################################################
+#
+# Get a cache of all the directories
+
+$(DIRECTORY_CACHE): $(ALL_EXISTING_SOURCE_DIRS)
+ $(prep-target)
+ @for cp in $(ALL_EXISTING_SOURCE_DIRS) ; do \
+ $(ECHO) "$(FIND) $${cp} -type f >> $@"; \
+ $(FIND) $${cp} -type f >> $@; \
+ done
+
+#############################################################
+#release version of core packages ########
+# Maximize performance and ensure that build number & milestone are set.
+
+rel-coredocs: sanitycheckcoredocs
+ $(MAKE) coredocs
+
+rel-docs: rel-coredocs $(ALL_OTHER_TARGETS)
+#
+# end of production targets
+
+otherdocs: $(ALL_OTHER_TARGETS)
+
+clean:
+ $(RM) -r $(DOCSDIR) $(DOCSTMPDIR)
+
+#############################################################
+# DEBUG TARGET
+# List the values defined in the makefile hierarchy, to make sure everything
+# is set properly, and to help identify values we can use instead of making new ones.
+# (Most of them come from common/shared/Defs.gmk)
+#
+# Notes:
+# * BUILD_NUMBER defaults to b00 if not set on command line with BUILD_NUMBER=<value>
+# * MILESTONE defaults to internal unless set to beta, rc, or fcs on command line
+#
+
+#############################################################
+.PHONY: all docs coredocs rel-docs otherdocs rel-coredocs \
+ sanitycheckcoredocs $(ALL_OTHER_TARGETS)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/makefiles/javadoc/NON_CORE_PKGS.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,106 @@
+#
+# Copyright (c) 2002, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+#
+# This file contains the package names of all the "non-core"
+# API published in the Java 2 SDK documentation. "Non-core" means
+# it includes all published API outside of the JDK API specification.
+#
+# These environment variables are used by javadoc in
+# make/docs/Makefile and are referenced by the localization
+# team when determining which APIs to extract javadoc
+# comments from.
+
+DOMAPI_PKGS = com.sun.java.browser.dom \
+ org.w3c.dom \
+ org.w3c.dom.bootstrap \
+ org.w3c.dom.ls \
+ org.w3c.dom.ranges \
+ org.w3c.dom.traversal \
+ org.w3c.dom.html \
+ org.w3c.dom.stylesheets \
+ org.w3c.dom.css \
+ org.w3c.dom.events \
+ org.w3c.dom.views
+
+JDI_PKGS = com.sun.jdi \
+ com.sun.jdi.event \
+ com.sun.jdi.request \
+ com.sun.jdi.connect \
+ com.sun.jdi.connect.spi
+
+MGMT_PKGS = com.sun.management
+
+JAAS_PKGS = com.sun.security.auth \
+ com.sun.security.auth.callback \
+ com.sun.security.auth.login \
+ com.sun.security.auth.module
+
+JGSS_PKGS = com.sun.security.jgss
+
+OLD_JSSE_PKGS = com.sun.net.ssl
+
+HTTPSERVER_PKGS = com.sun.net.httpserver \
+ com.sun.net.httpserver.spi
+
+NIO_PKGS = com.sun.nio.file
+
+DOCLETAPI_PKGS = com.sun.javadoc
+
+TAGLETAPI_FILE = com/sun/tools/doclets/Taglet.java
+
+TAGLETAPI_PKGS = com.sun.tools.doclets
+
+ATTACH_PKGS = com.sun.tools.attach \
+ com.sun.tools.attach.spi
+
+JCONSOLE_PKGS = com.sun.tools.jconsole
+
+TREEAPI_PKGS = com.sun.source.tree \
+ com.sun.source.util
+
+SMARTCARDIO_PKGS = javax.smartcardio
+
+SCTPAPI_PKGS = com.sun.nio.sctp
+
+ifeq ($(PLATFORM), macosx)
+APPLE_EXT_PKGS = com.apple.concurrent \
+ com.apple.eawt \
+ com.apple.eawt.event \
+ com.apple.eio
+endif
+
+# non-core packages in rt.jar
+NON_CORE_PKGS = $(DOMAPI_PKGS) \
+ $(MGMT_PKGS) \
+ $(JAAS_PKGS) \
+ $(JGSS_PKGS) \
+ $(NIO_PKGS) \
+ $(OLD_JSSE_PKGS) \
+ $(HTTPSERVER_PKGS) \
+ $(SMARTCARDIO_PKGS) \
+ $(SCTPAPI_PKGS) \
+ $(APPLE_EXT_PKGS)
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/makefiles/javadoc/Notes.html Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,49 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
+<html>
+<head>
+<title>Doc Process Notes</title>
+<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
+</head>
+
+<body>
+<h3><a name="REGEXP"></a><br>
+REGEXP</h3>
+<p> REGEXP is a list of wildcard patterns that determines which packages listed
+ in CORE_PKGS.gmk go into which summary-table on the main API index page. It
+ was motivated by the need to divide the world into "core packages"
+ (java.*) and "extension packages" (javax.*). In time, the distinction
+ went away. The whole table is now called "Platform Packages"--which
+ eliminated the need for this list of regular expressions. But it lingered on,
+ accreting all of the packages in the JVM, one by one. I pruned it back to "*",
+ so it now covers every package in the Java platform API docs. If some separation
+ is needed in the future, it can grow back into a colon-separated list, starting
+ with this, which is in all respects equivalent to "*" at this point
+ in time:</p>
+<blockquote>
+ <pre>REGEXP = "java.*:javax.*:org.ietf*:org.omg.</pre>
+</blockquote>
+<h3><a name="releaseTargets"></a><br>
+ Release Targets</h3>
+<p> (Thanks to Kelly O'Hair for this info.)</p>
+<p> The <tt>rel-coredocs</tt> and <tt>rel-docs</tt> targets were added by Eric
+ Armstrong. <tt>rel-coredocs</tt> assumes the kind of large, 32-bit machine used
+ in the javapubs group's docs-release process. It specifies memory settings accordingly
+ to maximize performance.</p>
+<p> The performance settings, like the sanity check, are most important for the
+ core docs--the platform APIs. Running javadoc on those APIs takes a significant
+ amount of time and memory. Setting the initial heap size as large as possible
+ is important to prevent thrashing as the heap grows. Setting the maximum as
+ large as necessary is also important to keep the job from failing.</p>
+<blockquote>
+ <p> <tt>-J-Xmx512</tt> sets a maximum of 512, which became necessary in 6.0<br>
+ <tt>-J-Xms256</tt> sets starting size to 256 (default is 8)</p>
+</blockquote>
+<p> <tt>rel-coredocs</tt> also includes a sanity check to help ensure that <tt>BUILD_NUMBER</tt>
+ and <tt>MILESTONE</tt> are specified properly when docs are built outside of
+ the normal release engineering process, with the intention of releasing them
+ on the web or in a downloaded docs bundle. (When invoked in release engineering's
+ control build, the values are always set properly. But when the targets are
+ run by themselves, they default to b00 and "internal"--which silently
+ sabotage the result of a build that can take many hours to complete.</p>
+</body>
+</html>
--- a/corba/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/corba/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
63aeb7a2472fb299134ad7388e0a111a5340b02d jdk8-b53
16c82fc74695bab9b9e0fb05c086a5a08ba0082f jdk8-b54
e8a0e84383d6fbd303ce44bd355fb25972b13286 jdk8-b55
+bf1bb47414e178beff67dc255fc3b97bf401f679 jdk8-b56
--- a/corba/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/corba/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -48,10 +48,8 @@
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
FLAGS:=$(BOOT_JDK_SOURCETARGET) -bootclasspath $(BOOT_RTJAR) $(DISABLE_CORBA_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
# The "generate new bytecode" uses the new compiler to generate bytecode
# for the new jdk that is being built. The code compiled by this setup
@@ -59,13 +57,9 @@
$(eval $(call SetupJavaCompiler,GENERATE_NEWBYTECODE,\
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
- FLAGS:=-Xprefer:source -XDignore.symbol.file=true \
- -cp $(BOOT_JDK)/lib/tools.jar \
- $(DISABLE_CORBA_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ FLAGS:=-cp $(BOOT_TOOLSJAR) -XDignore.symbol.file=true $(DISABLE_CORBA_WARNINGS),\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
$(eval $(call SetupJavaCompilation,BUILD_STRIPPROP,\
SETUP:=GENERATE_OLDBYTECODE,\
--- a/hotspot/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/hotspot/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -275,3 +275,4 @@
e8fb566b94667f88462164defa654203f0ab6820 jdk8-b54
09ea7e0752b306b8ae74713aeb4eb6263e1c6836 hs24-b22
af0c8a0808516317333dcf9af15567cdd52761ce jdk8-b55
+6124ff4218296c91e4a72f1a76c064892d39d61b jdk8-b56
--- a/jaxp/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/jaxp/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
2c566f25c39f0087464b73e3bcf1c1421d0f2a7e jdk8-b53
7dd81ccb7c1134df70969b3068b1e98def701746 jdk8-b54
7c2363666890c6675194948fbcd74d81ddb84298 jdk8-b55
+f19d63b2119a0092f016203981ffef5cc31bc3c5 jdk8-b56
--- a/jaxp/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jaxp/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -40,11 +40,9 @@
$(eval $(call SetupJavaCompiler,GENERATE_NEWBYTECODE_DEBUG,\
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
- FLAGS:=-Xprefer:source -XDignore.symbol.file=true $(DISABLE_JAXP_WARNINGS) -g,\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ FLAGS:=-XDignore.symbol.file=true $(DISABLE_JAXP_WARNINGS) -g,\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
$(eval $(call SetupJavaCompilation,BUILD_JAXP,\
SETUP:=GENERATE_NEWBYTECODE_DEBUG,\
--- a/jaxws/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/jaxws/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
8a35fd644d3c0b75813ff0236adef8a1c6f895c6 jdk8-b53
91970935926a20f19a5cbbf20931745ac1975e91 jdk8-b54
109c9e1f2d8546e9954e1b7be9a37a4396434544 jdk8-b55
+7813455ccdb08c3ee6051161176821325a5d44d7 jdk8-b56
--- a/jaxws/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jaxws/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -40,12 +40,9 @@
$(eval $(call SetupJavaCompiler,GENERATE_NEWBYTECODE_DEBUG,\
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
- FLAGS:=-Xprefer:source -XDignore.symbol.file=true -cp $(BOOT_JDK)/lib/tools.jar \
- $(DISABLE_JAXWS_WARNINGS) -g,\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ FLAGS:=-XDignore.symbol.file=true $(DISABLE_JAXWS_WARNINGS) -g,\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
# Dummy here is needed to trigger copying of META-INF
$(eval $(call SetupJavaCompilation,BUILD_JAF,\
--- a/jdk/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
2c6933c5106b81a8578b70996fe5b735fb3adb60 jdk8-b53
70ad0ed1d6cef0e7712690d1bab21e4769708aad jdk8-b54
1f3f4b333341873f00da3dee85e4879f0e89c9bb jdk8-b55
+2e9eeef2909b33c9224a024afddb61ccb0b77f14 jdk8-b56
--- a/jdk/make/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/make/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -1,5 +1,5 @@
#
-# Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -29,6 +29,7 @@
#
BUILDDIR=.
+
include $(BUILDDIR)/common/Defs.gmk
#
@@ -273,6 +274,7 @@
# Release engineering targets.
#
include $(BUILDDIR)/common/Release.gmk
+-include $(CUSTOM_MAKE_DIR)/Release.gmk
#
# Cscope targets.
--- a/jdk/make/com/sun/java/pack/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/make/com/sun/java/pack/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -159,7 +159,7 @@
$(prep-target)
$(RM) $(TEMPDIR)/mapfile-vers
$(CP) mapfile-vers-unpack200 $(TEMPDIR)/mapfile-vers
- $(LINKER) $(LDDFLAGS) $(UNPACK_EXE_FILES_o) $(RES) $(LIBCXX) $(LDOUTPUT)$(TEMPDIR)/unpack200$(EXE_SUFFIX)
+ $(LINKER) $(LDDFLAGS) $(sort $(UNPACK_EXE_FILES_o)) $(RES) $(LIBCXX) $(LDOUTPUT)$(TEMPDIR)/unpack200$(EXE_SUFFIX)
ifdef MT
$(MT) /manifest $(OBJDIR)/unpack200$(EXE_SUFFIX).manifest /outputresource:$(TEMPDIR)/unpack200$(EXE_SUFFIX);#1
endif
--- a/jdk/make/common/Defs-embedded.gmk Wed Jul 05 18:22:17 2017 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,76 +0,0 @@
-#
-# Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-#
-# Variable definitions for SE Embedded builds. This file should
-# not contain rules.
-#
-ifdef JAVASE_EMBEDDED
-
-# Compress jar files
-COMPRESS_JARS = true
-
-# Don't mmap zip files
-LIBZIP_CAN_USE_MMAP = false
-
-# Disable ALSA version check
-REQUIRED_ALSA_VERSION =
-
-# Compilation settings
-OTHER_CPPFLAGS += -DJAVASE_EMBEDDED
-
-# Product naming
-PRODUCT_SUFFIX = SE Embedded Runtime Environment
-RUNTIME_NAME = $(PRODUCT_NAME) $(PRODUCT_SUFFIX)
-
-# Reduced JRE locations
-JRE_REDUCED_HEADLESS_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2re-reduced-headless-image
-JRE_REDUCED_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2re-reduced-image
-
-# Override on linux to further reduce binary/lib sizes in product build
-ifeq ($(PLATFORM), linux)
- ifeq ($(VARIANT), OPT)
- ifneq ($(NO_STRIP), true)
- ifneq ($(DEBUG_BINARIES), true)
- POST_STRIP_PROCESS = $(STRIP) --strip-unneeded
- endif
- endif
- endif
-endif
-
-# NIO Platform specific source file location
-ifdef CROSS_COMPILE_ARCH
- NIO_PLATFORM_CLASSES_ROOT_DIR = $(CLOSED_PLATFORM_SRC)/classes/
-endif
-
-# For ARM sflt we need to link to a library with improved FP accuracy
-# and it must be linked after fdlibm - this places it at the end after libc
-# -z muldefs avoids linker errors for duplicate symbols.
-ifeq ($(CROSS_COMPILE_ARCH), arm)
- EXTRA_LIBS += $(EXT_LIBS_PATH)/sflt_glibc_jdk.a -Xlinker -z -Xlinker muldefs
-endif
-
-endif # JAVASE_EMBEDDED
-
--- a/jdk/make/common/Defs.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/make/common/Defs.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -109,6 +109,21 @@
endif
endif
+# We allow for potential specialization of build files. This has to be
+# done on a file-by-file, case-by-case basis. Here we define the basic control
+# over where custom files are being used. Later we will -include the custom
+# Defs.gmk if present. This works best because all Makefiles include defs.gmk.
+# In other cases we can either have foo.gmk include custom/foo.gmk, or
+# a Makefile can do:
+# include foo.gmk
+# -include $CUSTOM_MAKE_DIR/foo.gmk
+#
+# For non-OpenJDK builds the default location is the make/closed repository.
+# For OpenJDK builds a real value has to be supplied externally.
+ifneq ($(OPENJDK),true)
+ CUSTOM_MAKE_DIR = $(BUILDDIR)/closed
+endif
+
#
# Get platform definitions
#
@@ -116,12 +131,6 @@
include $(JDK_TOPDIR)/make/common/Defs-$(PLATFORM).gmk
#
-# SE-Embedded support, if enabled
-#
-
-include $(JDK_TOPDIR)/make/common/Defs-embedded.gmk
-
-#
# Cross-compilation Settings
#
ifdef CROSS_COMPILE_ARCH
@@ -611,4 +620,6 @@
$(install-importonly-file)
endef
+-include $(CUSTOM_MAKE_DIR)/Defs.gmk
+
.PHONY: all build clean clobber
--- a/jdk/make/common/Release-embedded.gmk Wed Jul 05 18:22:17 2017 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,230 +0,0 @@
-#
-# Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-#
-# SE-Embedded Reduced JRE targets
-#
-ifdef JAVASE_EMBEDDED
-
-reduced-image-jre reduced-headless-image-jre ::
- @$(ECHO) ">>>Making "$@" @ `$(DATE)` ..."
-
-# Add the reduced-jre images as pre-reqs. These will be processed last
-images:: reduced-image-jre reduced-headless-image-jre
-
-
-######################################################
-# Create the headless rt.jar
-######################################################
-
-NOT_HEADLESS_RT_JAR_LIST = $(ABS_TEMPDIR)/not_hl_rt_jar.list
-HEADLESS_RT_JAR_FILELIST=$(JARFILELISTS_TEMPDIR)/hl_rt_jar_list
-TOTAL_HEADLESS_JAR_FILELIST=$(REORDER_TEMPDIR)/hl_file_list
-HEADLESS_CLASSLIST=$(ABS_TEMPDIR)/headless_classlist
-
-# Add the jar file directories that we don't want in the
-# headless JRE. If you want to remove most classes in a
-# directory, put the directory in the NOT_HEADLESS_RT_JAR_LIST
-# and put the individual classes you want to keep in the
-# HEADLESS_CLASSLIST file.
-$(NOT_HEADLESS_RT_JAR_LIST): $(NOT_RT_JAR_LIST)
- $(RM) $(HEADLESS_CLASSLIST)
- $(RM) $(NOT_HEADLESS_RT_JAR_LIST)
- $(CP) $(NOT_RT_JAR_LIST) $(NOT_HEADLESS_RT_JAR_LIST)
-# List all the packages to be excluded
- $(ECHO) "sun/awt/motif/" >> $@
- $(ECHO) "sun/awt/X11/" >> $@
- $(ECHO) "sun/applet/" >> $@
- $(ECHO) "sun/java2d/opengl/" >> $@
- $(ECHO) "com/sun/java/swing/plaf/" >> $@
-# List all the individual classes to be included
- $(ECHO) "sun/awt/motif/MFontConfiguration.class" >$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/applet/AppContextCreator.class" >>$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/applet/AppletAudioClip.class" >>$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/java2d/opengl/GLXSurfaceData.class" >>$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/java2d/opengl/GLXSurfaceData"\$$"GLXOffScreenSurfaceData.class" >>$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/java2d/opengl/GLXVolatileSurfaceManager.class" >>$(HEADLESS_CLASSLIST)
- $(ECHO) "sun/java2d/opengl/OGLSurfaceData.class" >>$(HEADLESS_CLASSLIST)
-
-
-$(TOTAL_HEADLESS_JAR_FILELIST): $(JARREORDER_JARFILE) $(NOT_HEADLESS_RT_JAR_LIST)
- $(prep-target)
- $(RM) $@.temp
- $(CD) $(CLASSBINDIR) ; \
- $(BOOT_JAVA_CMD) -jar $(JARREORDER_JARFILE) \
- -o $@.temp - $(NOT_HEADLESS_RT_JAR_LIST) .
-# Add on the explicitly included class files from the otherwise excluded packages
- $(CAT) $(HEADLESS_CLASSLIST) >> $@.temp
- $(MV) $@.temp $@
- @$(CD) $(CLASSBINDIR); $(java-vm-cleanup)
-
-# Create the headless rt.jar file list & non-class files list
-MakeHeadlessJarFileList: $(TOTAL_HEADLESS_JAR_FILELIST) $(JARSPLIT_JARFILE)
- @$(RM) $(HEADLESS_RT_JAR_FILELIST) $(RES_JAR_FILELIST)
- $(BOOT_JAVA_CMD) -jar $(JARSPLIT_JARFILE) $(TOTAL_HEADLESS_JAR_FILELIST) \
- -o $(HEADLESS_RT_JAR_FILELIST) $(RES_JAR_FILELIST)
- @$(java-vm-cleanup)
-
-# Create headless rt.jar
-HL_RT_JAR=$(ABS_TEMPDIR)/rt-hl-orig.jar
-$(HL_RT_JAR): MakeHeadlessJarFileList $(RT_JAR_MANIFEST_FILE)
- $(prep-target)
- $(CD) $(CLASSBINDIR) ; \
- $(BOOT_JAR_CMD) $(CREATE_JAR_OPTS) $(RT_JAR_MANIFEST_FILE) $@ @$(HEADLESS_RT_JAR_FILELIST) \
- $(JAR_JFLAGS)
- @$(CD) $(CLASSBINDIR); $(java-vm-cleanup)
-
-
-#
-# Produce a reduced Headful JRE for Embedded Devices
-#
-# The deployment binaries are added during the deployment build process
-#
-
-# Binaries that don't get included in reduced jre image bin directory
-NOT_REDUCEDJRE_BIN = \
- java_vm \
- kinit \
- klist \
- ktab \
- orbd \
- policytool \
- rmid \
- rmiregistry \
- servertool \
- tnameserv \
- pack200 \
- unpack200
-
-# jars/resources/libs that don't get included in reduced jre image lib directory
-NOT_REDUCEDJRE_LIB = \
- charsets.jar \
- ext/dnsns.jar \
- ext/localedata.jar \
- $(LIBARCH)/client/classes.jsa \
- $(LIBARCH)/libjavaplugin_jni.so \
- $(LIBARCH)/libjavaplugin_nscp_gcc29.so \
- $(LIBARCH)/libjavaplugin_nscp.so \
- $(LIBARCH)/libjavaplugin_oji.so
-
-# JRE docs that don't get included in reduced jre image top directory
-NOT_REDUCEDJRE_DOC = \
- Welcome.html
-
-reduced-image-jre::
- @$(ECHO) Starting to Produce Reduced JRE
- @#
- @# First make a copy of the full JRE
- @#
- $(RM) -r $(JRE_REDUCED_IMAGE_DIR)
- $(MKDIR) -p $(JRE_REDUCED_IMAGE_DIR)
- $(CD) $(JRE_IMAGE_DIR); \
- $(TAR) cf - . | ($(CD) $(JRE_REDUCED_IMAGE_DIR); $(TAR) xf - );
-
- @#
- @# Remove all of the files that are not needed for the
- @# reduced JRE
- @#
- for l in $(NOT_REDUCEDJRE_BIN) ; do \
- $(RM) $(JRE_REDUCED_IMAGE_DIR)/bin/$$l ; \
- done
- for l in $(NOT_REDUCEDJRE_LIB) ; do \
- $(RM) $(JRE_REDUCED_IMAGE_DIR)/lib/$$l ; \
- done
- for l in $(NOT_REDUCEDJRE_DOC) ; do \
- $(RM) $(JRE_REDUCED_IMAGE_DIR)/$$l ; \
- done
-
- @# Remove misc. other files
- $(RM) -r $(JRE_REDUCED_IMAGE_DIR)/man
- $(RM) -f $(JRE_REDUCED_IMAGE_DIR)/CHANGES
-
- @$(ECHO) Done Creating Reduced JRE
-
-#
-# Produce a reduced Headless JRE
-#
-reduced-headless-image-jre:: $(RT_JAR) $(RESOURCES_JAR) $(BUILD_META_INDEX) $(HL_RT_JAR)
- @$(ECHO) Starting to Produce Reduced Headless JRE
- @#
- @# First make a copy of the reduced JRE we just built
- @#
- $(RM) -r $(JRE_REDUCED_HEADLESS_IMAGE_DIR)
- $(MKDIR) -p $(JRE_REDUCED_HEADLESS_IMAGE_DIR)
- $(CD) $(JRE_REDUCED_IMAGE_DIR); \
- $(TAR) cf - . | ($(CD) $(JRE_REDUCED_HEADLESS_IMAGE_DIR); $(TAR) xf - );
-
- @# Replace the full rt.jar with the headless rt.jar
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/rt.jar
- $(CP) $(HL_RT_JAR) $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/rt.jar
-
- @#
- @# Remove all of the files that are not needed for the
- @# reduced Headless JRE
- @#
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/$(LIBARCH)/gtkhelper
- $(RM) $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/$(LIBARCH)/libjsoundalsa.so
- $(RM) -r $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/audio
- $(RM) -fr $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/applet
- $(RM) $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/$(LIBARCH)/awt_robot
- $(RM) $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/$(LIBARCH)/libawt_xawt.so
- $(RM) -r $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/$(LIBARCH)/libsplashscreen.so
- @# Remove oblique fonts and reduce font support to LucidaSansRegular only
- $(RM) -fr $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/oblique-fonts
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaBrightDemiBold.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaBrightDemiItalic.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaBrightItalic.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaBrightRegular.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaSansDemiBold.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaTypewriterBold.ttf
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/LucidaTypewriterRegular.ttf
-
-ifeq ($(PLATFORM), linux)
-# put out minimal fonts.dir file for the remaining font
- $(RM) -f $(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) 6>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-1">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-2">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-4">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-5">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-7">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
- $(ECHO) "LucidaSansRegular.ttf -b&h-lucidasans-medium-r-normal-sans-0-0-0-0-p-0-iso8859-9">>$(JRE_REDUCED_HEADLESS_IMAGE_DIR)/lib/fonts/fonts.dir
-
-endif # Linux
-
- @#
- @# all done with JRE reduced headless image
- @#
-
- @$(ECHO) Done Creating Reduced Headless JRE
-
-images-clobber::
- $(RM) -r $(JRE_REDUCED_IMAGE_DIR)
- $(RM) -r $(JRE_REDUCED_HEADLESS_IMAGE_DIR)
-
-.PHONY: reduced-image-jre reduced-headless-image-jre
-
-endif # JAVASE_EMBEDDED
-
--- a/jdk/make/common/Release.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/make/common/Release.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -750,10 +750,6 @@
BUILDMETAINDEX_JARFILE = $(ABS_BUILDTOOLJARDIR)/buildmetaindex.jar
-# SE-Embedded targets if enabled
-include $(JDK_TOPDIR)/make/common/Release-embedded.gmk
-
-
######################################################
# JRE Image
######################################################
--- a/jdk/make/java/jli/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/make/java/jli/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -190,7 +190,7 @@
$(STATIC_LIBRARY): $(FILES_o)
@$(prep-target)
- $(LIBEXE) -nologo -out:$@ $(FILES_o)
+ $(LIBEXE) -nologo -out:$@ $(sort $(FILES_o))
library:: $(STATIC_LIBRARY)
endif # PLATFORM
@@ -216,7 +216,7 @@
$(STATIC_LIBRARY): $(STATIC_LIBRARY_DIR)
@$(prep-target)
- $(AR) $(ARFLAGS) $@ $(FILES_o)
+ $(AR) $(ARFLAGS) $@ $(sort $(FILES_o))
library:: $(STATIC_LIBRARY)
--- a/jdk/makefiles/CompileDemos.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CompileDemos.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -44,10 +44,11 @@
define SetupAppletDemo
$$(eval $$(call SetupJavaCompilation,BUILD_DEMO_APPLET_$1,\
- SETUP:=GENERATE_USINGJDKBYTECODE$2,\
+ SETUP:=GENERATE_USINGJDKBYTECODE,\
SRC:=$(JDK_TOPDIR)/src/$3share/demo/applets/$1,\
- BIN:=$(JDK_OUTPUTDIR)/newdemo/applets/$1,\
- COPY:=.html .java .xyz .obj .au .gif))
+ BIN:=$(JDK_OUTPUTDIR)/demo/applets/$1,\
+ COPY:=.html .java .xyz .obj .au .gif,\
+ DISABLE_SJAVAC:=$2))
BUILD_DEMOS += $$(BUILD_DEMO_APPLET_$1)
endef
@@ -67,11 +68,11 @@
$(eval $(call SetupAppletDemo,SpreadSheet))
# Build WireFrame without a server since it
# has a class Matrix3D that also exists in MoleculeViewer.
-$(eval $(call SetupAppletDemo,WireFrame,_NOSERV))
+$(eval $(call SetupAppletDemo,WireFrame,true))
ifndef OPENJDK
$(eval $(call SetupAppletDemo,Animator,,closed/))
- $(eval $(call SetupAppletDemo,GraphLayout,_NOSERV,closed/))
+ $(eval $(call SetupAppletDemo,GraphLayout,true,closed/))
$(eval $(call SetupAppletDemo,JumpingBox,,closed/))
$(eval $(call SetupAppletDemo,TicTacToe,,closed/))
endif
@@ -111,29 +112,30 @@
ifneq ($$($1_JAVA_FILES_EXIST),)
$$(eval $$(call SetupJavaCompilation,BUILD_DEMO_$1,\
- SETUP:=GENERATE_USINGJDKBYTECODE$(12),\
+ SETUP:=GENERATE_USINGJDKBYTECODE,\
ADD_JAVAC_FLAGS:=$3,\
SRC:=$$($1_MAIN_SRC) $5,\
- BIN:=$(JDK_OUTPUTDIR)/newdemoclasses/$2/$1,\
+ BIN:=$(JDK_OUTPUTDIR)/democlasses/$2/$1,\
COPY:=$(PATTERNS_TO_COPY) $(10),\
- JAR:=$(JDK_OUTPUTDIR)/newdemo/$2/$1/$$($1_JARFILE),\
+ JAR:=$(JDK_OUTPUTDIR)/demo/$2/$1/$$($1_JARFILE),\
JARMAIN:=$4,\
MANIFEST:=$(JDK_TOPDIR)/make/tools/manifest.mf,\
EXTRA_MANIFEST_ATTR:=$(11),\
- SRCZIP:=$(JDK_OUTPUTDIR)/newdemo/$2/$1/src.zip,\
- EXCLUDE_FILES:=$9))
+ SRCZIP:=$(JDK_OUTPUTDIR)/demo/$2/$1/src.zip,\
+ EXCLUDE_FILES:=$9,\
+ DISABLE_SJAVAC:=$(12)))
BUILD_DEMOS += $$(BUILD_DEMO_$1) \
- $(JDK_OUTPUTDIR)/newdemo/$2/$1/$$($1_JARFILE) \
- $(JDK_OUTPUTDIR)/newdemo/$2/$1/src.zip
+ $(JDK_OUTPUTDIR)/demo/$2/$1/$$($1_JARFILE) \
+ $(JDK_OUTPUTDIR)/demo/$2/$1/src.zip
endif
# Copy files.
$1_COPY_TARGETS := $$(patsubst $(JDK_TOPDIR)/src/$6share/demo/$2/$1/%,\
- $(JDK_OUTPUTDIR)/newdemo/$2/$1/%,\
+ $(JDK_OUTPUTDIR)/demo/$2/$1/%,\
$$(wildcard $$(addprefix $(JDK_TOPDIR)/src/$6share/demo/$2/$1/,$7)))
ifneq ($7,)
- $(JDK_OUTPUTDIR)/newdemo/$2/$1/% : $(JDK_TOPDIR)/src/$6share/demo/$2/$1/%
+ $(JDK_OUTPUTDIR)/demo/$2/$1/% : $(JDK_TOPDIR)/src/$6share/demo/$2/$1/%
$(MKDIR) -p $$(@D)
$(CP) $$< $$@
$(CHMOD) -f ug+w $$@
@@ -144,20 +146,20 @@
endef
$(eval $(call SetupDemo,CodePointIM,jfc,,CodePointIM,,,*.html))
-$(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/_the.services : \
- $(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/CodePointIM.jar \
+$(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/_the.services : \
+ $(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/CodePointIM.jar \
$(JDK_TOPDIR)/src/share/demo/jfc/CodePointIM/java.awt.im.spi.InputMethodDescriptor
- (cd $(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM && \
+ (cd $(JDK_OUTPUTDIR)/demo/jfc/CodePointIM && \
$(MKDIR) -p _the.tmp/META-INF/services && \
$(CP) $(JDK_TOPDIR)/src/share/demo/jfc/CodePointIM/java.awt.im.spi.InputMethodDescriptor _the.tmp/META-INF/services && \
cd _the.tmp && \
- $(JAR) uf $(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/CodePointIM.jar META-INF/services/java.awt.im.spi.InputMethodDescriptor && \
+ $(JAR) uf $(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/CodePointIM.jar META-INF/services/java.awt.im.spi.InputMethodDescriptor && \
cd META-INF/services && \
- $(JAR) uf $(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/CodePointIM.jar java.awt.im.spi.InputMethodDescriptor)
- $(RM) -r $(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/_the.tmp
+ $(JAR) uf $(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/CodePointIM.jar java.awt.im.spi.InputMethodDescriptor)
+ $(RM) -r $(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/_the.tmp
$(TOUCH) $@
-BUILD_DEMOS+=$(JDK_OUTPUTDIR)/newdemo/jfc/CodePointIM/_the.services
+BUILD_DEMOS+=$(JDK_OUTPUTDIR)/demo/jfc/CodePointIM/_the.services
$(eval $(call SetupDemo,FileChooserDemo,jfc,,FileChooserDemo,,,README*))
$(eval $(call SetupDemo,Font2DTest,jfc,,Font2DTest,,,*.html *.txt))
@@ -182,12 +184,12 @@
$(eval $(call SetupDemo,Stylepad,jfc,,Stylepad,\
$(JDK_TOPDIR)/src/share/demo/jfc/Notepad,closed/,*.txt,,$(JDK_TOPDIR)/src/share/demo/jfc/Notepad/README.txt))
$(eval $(call SetupDemo,SwingSet2,jfc,,SwingSet2,,closed/,README* *.html,,,.java COPYRIGHT,\
- SplashScreen-Image: resources/images/splash.png,_NOSERV))
+ SplashScreen-Image: resources/images/splash.png,true))
BUILD_DEMOS += $(patsubst $(JDK_TOPDIR)/src/closed/share/demo/nbproject/%,\
- $(JDK_OUTPUTDIR)/newdemo/nbproject/%,\
+ $(JDK_OUTPUTDIR)/demo/nbproject/%,\
$(shell $(FIND) $(JDK_TOPDIR)/src/closed/share/demo/nbproject/ -type f))
- $(JDK_OUTPUTDIR)/newdemo/nbproject/% : $(JDK_TOPDIR)/src/closed/share/demo/nbproject/%
+ $(JDK_OUTPUTDIR)/demo/nbproject/% : $(JDK_TOPDIR)/src/closed/share/demo/nbproject/%
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
@@ -196,7 +198,7 @@
##################################################################################################
# Why do we install a demo jar into the main jre/lib/ext????????????????
-$(JDK_OUTPUTDIR)/lib/ext/zipfs.jar : $(JDK_OUTPUTDIR)/newdemo/nio/zipfs/zipfs.jar
+$(JDK_OUTPUTDIR)/lib/ext/zipfs.jar : $(JDK_OUTPUTDIR)/demo/nio/zipfs/zipfs.jar
$(MKDIR) -p $(@D)
$(CP) $< $@
@@ -207,52 +209,74 @@
# In the old makefiles, j2dbench was not compiled.
#$(eval $(call SetupDemo,J2DBench,java2d,/src,,j2dbench/J2DBench))
+# JVMTI demos are a bit strange and share some files, but be careful the
+# shared files are just the *.c and *.h files, not the README or sample
+# makefiles. So we always exclude the README.txt and sample.makefile.txt
+# from the extra sources.
define SetupJVMTIDemo
# Param 1 = Name of the demo
# Param 2 = add these directories to the includes, default is agent_util
# Param 3 = extra CFLAGS
# Param 4 = C or C++ (defaults to C)
# Param 5 = libs for posix
- # Param 6 = libs for winapi
+ # Param 6 = libs for windows
# Param 7 = libs for solaris
- BUILD_DEMO_JVMTI_$1_EXTRA_SRC:= $$(wildcard $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/demo/jvmti/$1) \
- $$(wildcard $$(addprefix $(JDK_TOPDIR)/src/share/demo/jvmti/,$2))
+ BUILD_DEMO_JVMTI_$1_EXTRA_SRC:= \
+ $$(wildcard $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/demo/jvmti/$1) \
+ $$(wildcard $$(addprefix $(JDK_TOPDIR)/src/share/demo/jvmti/,$2))
+ BUILD_DEMO_JVMTI_$1_EXTRA_SRC_EXCLUDE:= \
+ $$(wildcard $$(addprefix $(JDK_TOPDIR)/src/share/demo/jvmti/,$2)/README.txt) \
+ $$(wildcard $$(addprefix $(JDK_TOPDIR)/src/share/demo/jvmti/,$2)/sample.makefile.txt)
BUILD_DEMO_JVMTI_$1_EXTRA_INC:=$$(addprefix -I,$$(BUILD_DEMO_JVMTI_$1_EXTRA_SRC))
BUILD_DEMO_JVMTI_$1_LANG:=C
- BUILD_DEMO_JVMTI_$1_O_FLAG:=$(C_O_FLAG_NORM)
ifneq (,$4)
BUILD_DEMO_JVMTI_$1_LANG:=$4
endif
ifeq (C++,$4)
- $1_EXTRA_CXX:=$(LIBCXX)
- BUILD_DEMO_JVMTI_$1_O_FLAG:=$(CXX_O_FLAG_NORM)
+ $1_EXTRA_CXX:=$(LDFLAGS_CXX_JDK) $(LIBCXX)
endif
- $1_CXXFLAGS:=$(CXXFLAGS_JDKLIB) $$(BUILD_DEMO_JVMTI_$1_O_FLAG) -I$(JDK_TOPDIR)/src/share/demo/jvmti/$1 $$(BUILD_DEMO_JVMTI_$1_EXTRA_INC) $3
+ $1_CXXFLAGS:=$(CXXFLAGS_JDKLIB) -I$(JDK_TOPDIR)/src/share/demo/jvmti/$1 \
+ $$(BUILD_DEMO_JVMTI_$1_EXTRA_INC) $3 \
+ $(CXXFLAGS_DEBUG_SYMBOLS)
ifeq ($1-$(OPENJDK_TARGET_CPU_ARCH),waiters-sparc)
- $1_FILTER:=-xregs=no%appl
- $1_CXXFLAGS:=$$(filter-out $$($1_FILTER),$$($1_CXXFLAGS))
+ $1_FILTER:=-xregs=no%appl
+ $1_CXXFLAGS:=$$(filter-out $$($1_FILTER),$$($1_CXXFLAGS))
endif
+ # Workaround for CFLAGS_JDKLIB containing ',' on solaris. If this is added as 'CFLAGS' to the
+ # eval call below, the comma gets expanded too early.
+ BUILD_DEMO_JVMTI_$1_CFLAGS:=$(CFLAGS_JDKLIB) $(CFLAGS_DEBUG_SYMBOLS) \
+ -I$(JDK_TOPDIR)/src/share/demo/jvmti/$1 $$(BUILD_DEMO_JVMTI_$1_EXTRA_INC) $3
+
+ # Remove the -incremental:no setting to get .ilk-files like in the old build.
$$(eval $$(call SetupNativeCompilation,BUILD_DEMO_JVMTI_$1,\
SRC:=$(JDK_TOPDIR)/src/share/demo/jvmti/$1 $$(BUILD_DEMO_JVMTI_$1_EXTRA_SRC),\
LANG:=$$(BUILD_DEMO_JVMTI_$1_LANG),\
- CFLAGS:=$(CFLAGS_JDKLIB) $$(BUILD_DEMO_JVMTI_$1_O_FLAG) -I$(JDK_TOPDIR)/src/share/demo/jvmti/$1 $$(BUILD_DEMO_JVMTI_$1_EXTRA_INC) $3,\
+ OPTIMIZATION:=LOW,\
CXXFLAGS:=$$($1_CXXFLAGS),\
- LDFLAGS:=$(LDFLAGS_JDKLIB),\
+ LDFLAGS:=$(filter-out -incremental:no -opt:ref,$(LDFLAGS_JDKLIB)),\
+ LDFLAGS_macosx:=$(call SET_EXECUTABLE_ORIGIN),\
LDFLAGS_SUFFIX:=$$($1_EXTRA_CXX),\
LDFLAGS_SUFFIX_posix:=$5,\
- LDFLAGS_SUFFIX_winapi:=$6,\
- LDFLAGS_SUFFIX_solaris:=-lc $7,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/newdemoobjs/jvmti/$1,\
- OUTPUT_DIR:=$(JDK_OUTPUTDIR)/newdemo/jvmti/$1/lib,\
+ LDFLAGS_SUFFIX_windows:=$6,\
+ LDFLAGS_SUFFIX_solaris:=$7 -lc,\
+ LDFLAGS_SUFFIX_linux:=$8,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$$(RC_FLAGS) \
+ /D "JDK_FNAME=$1.dll" \
+ /D "JDK_INTERNAL_NAME=$1" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/demoobjs/jvmti/$1,\
+ OUTPUT_DIR:=$(JDK_OUTPUTDIR)/demo/jvmti/$1/lib,\
LIBRARY:=$1))
$$(eval $$(call SetupZipArchive,BUILD_DEMO_JVMTI_SRC_$1,\
SRC:=$(JDK_TOPDIR)/src/share/demo/jvmti/$1 $$(BUILD_DEMO_JVMTI_$1_EXTRA_SRC),\
- ZIP:=$(JDK_OUTPUTDIR)/newdemo/jvmti/$1/src.zip))
+ EXCLUDE_FILES:=$$(BUILD_DEMO_JVMTI_$1_EXTRA_SRC_EXCLUDE), \
+ ZIP:=$(JDK_OUTPUTDIR)/demo/jvmti/$1/src.zip))
- $(JDK_OUTPUTDIR)/newdemo/jvmti/$1/README.txt : $(JDK_TOPDIR)/src/share/demo/jvmti/$1/README.txt
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/README.txt : $(JDK_TOPDIR)/src/share/demo/jvmti/$1/README.txt
$(MKDIR) -p $$(@D)
$(CP) $$< $$@
$(CHMOD) -f ug+w $$@
@@ -261,29 +285,40 @@
$$(eval $$(call SetupJavaCompilation,BUILD_DEMO_JVMTI_$1_JAVA,\
SETUP:=GENERATE_USINGJDKBYTECODE,\
SRC:=$(JDK_TOPDIR)/src/share/demo/jvmti/$1,\
- BIN:=$(JDK_OUTPUTDIR)/newdemoclasses/jvmti/$1,\
+ BIN:=$(JDK_OUTPUTDIR)/democlasses/jvmti/$1,\
COPY:=$(PATTERNS_TO_COPY),\
- JAR:=$(JDK_OUTPUTDIR)/newdemo/jvmti/$1/$1.jar,\
+ JAR:=$(JDK_OUTPUTDIR)/demo/jvmti/$1/$1.jar,\
EXTRA_MANIFEST_ATTR:=Main-Class: \n,\
MANIFEST:=$(JDK_TOPDIR)/make/tools/manifest.mf))
- BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/jvmti/$1/$1.jar
+ BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/jvmti/$1/$1.jar
endif
BUILD_DEMOS += $$(BUILD_DEMO_JVMTI_$1) \
- $(JDK_OUTPUTDIR)/newdemo/jvmti/$1/src.zip \
- $(JDK_OUTPUTDIR)/newdemo/jvmti/$1/README.txt
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/src.zip \
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/README.txt
+
+ ifeq ($(OPENJDK_TARGET_OS),windows)
+ # These files normally end up in OBJECT_DIR but for demos they
+ # are supposed to be included in the distro.
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/lib/$1.lib: $$(BUILD_DEMO_JVMTI_$1)
+ $(CP) $(JDK_OUTPUTDIR)/demoobjs/jvmti/$1/$1.lib $$@
+
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/lib/$1.exp: $$(BUILD_DEMO_JVMTI_$1)
+ $(CP) $(JDK_OUTPUTDIR)/demoobjs/jvmti/$1/$1.exp $$@
+
+ BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/jvmti/$1/lib/$1.lib \
+ $(JDK_OUTPUTDIR)/demo/jvmti/$1/lib/$1.exp
+ endif
endef
$(eval $(call SetupJVMTIDemo,compiledMethodLoad, agent_util))
$(eval $(call SetupJVMTIDemo,gctest, agent_util))
$(eval $(call SetupJVMTIDemo,heapTracker, agent_util java_crw_demo))
$(eval $(call SetupJVMTIDemo,heapViewer, agent_util))
-# hprof contains error messages using __FILE__ macro. These expand to the absolute path
-# in the new build system and relative in the old, causing the binaries to differ.
$(eval $(call SetupJVMTIDemo,hprof, java_crw_demo,\
- -I$(JDK_TOPDIR)/src/share/npt -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/npt,C,\
- -ldl,ws2_32.lib winmm.lib,-lsocket -lnsl))
+ -I$(JDK_TOPDIR)/src/share/npt -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/npt,C,\
+ -ldl,ws2_32.lib winmm.lib,-lsocket -lnsl,-lpthread))
$(eval $(call SetupJVMTIDemo,minst, agent_util java_crw_demo))
$(eval $(call SetupJVMTIDemo,mtrace, agent_util java_crw_demo))
@@ -298,11 +333,11 @@
# The number of files are few enough so that we can use echo safely below to list them.
JPDA_FILES:=$(subst $(JDK_TOPDIR)/src/share/classes/,,$(JPDA_SOURCES))
-$(JDK_OUTPUTDIR)/newdemo/jpda/src.zip : $(JPDA_SOURCES)
+$(JDK_OUTPUTDIR)/demo/jpda/src.zip : $(JPDA_SOURCES)
$(MKDIR) -p $(@D)
(cd $(JDK_TOPDIR)/src/share/classes && $(ZIP) -qru $@ com -i "com/sun/tools/example/*")
-$(JDK_OUTPUTDIR)/newdemo/jpda/examples.jar : $(JPDA_SOURCES)
+$(JDK_OUTPUTDIR)/demo/jpda/examples.jar : $(JPDA_SOURCES)
$(MKDIR) -p $(@D)
$(RM) $(@D)/_the.sources
$(call ListPathsSafely,JPDA_FILES,\n, >> $(@D)/_the.sources)
@@ -312,103 +347,104 @@
(cd $(JDK_TOPDIR)/src/share/classes && $(JAR) cfm $@ $(@D)/_the.manifest @$(@D)/_the.sources)
(cd $(JDK_TOPDIR)/src/share/classes/com/sun/tools/example && $(JAR) uf $@ README)
-$(JDK_OUTPUTDIR)/newdemo/jpda/com/sun/tools/example/README : $(JDK_TOPDIR)/src/share/classes/com/sun/tools/example/README
+$(JDK_OUTPUTDIR)/demo/jpda/com/sun/tools/example/README : $(JDK_TOPDIR)/src/share/classes/com/sun/tools/example/README
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
-BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/jpda/src.zip $(JDK_OUTPUTDIR)/newdemo/jpda/examples.jar \
- $(JDK_OUTPUTDIR)/newdemo/jpda/com/sun/tools/example/README
+BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/jpda/src.zip $(JDK_OUTPUTDIR)/demo/jpda/examples.jar \
+ $(JDK_OUTPUTDIR)/demo/jpda/com/sun/tools/example/README
##################################################################################################
-$(JDK_OUTPUTDIR)/newdemo/management/index.html : $(JDK_TOPDIR)/src/share/demo/management/index.html
+$(JDK_OUTPUTDIR)/demo/management/index.html : $(JDK_TOPDIR)/src/share/demo/management/index.html
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
-$(JDK_OUTPUTDIR)/newdemo/jvmti/index.html : $(JDK_TOPDIR)/src/share/demo/jvmti/index.html
+$(JDK_OUTPUTDIR)/demo/jvmti/index.html : $(JDK_TOPDIR)/src/share/demo/jvmti/index.html
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
-BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/management/index.html \
- $(JDK_OUTPUTDIR)/newdemo/jvmti/index.html
+BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/management/index.html \
+ $(JDK_OUTPUTDIR)/demo/jvmti/index.html
##################################################################################################
# The netbeans project files are copied into the demo directory.
BUILD_DEMOS += $(patsubst $(JDK_TOPDIR)/src/share/demo/nbproject/%,\
- $(JDK_OUTPUTDIR)/newdemo/nbproject/%,\
+ $(JDK_OUTPUTDIR)/demo/nbproject/%,\
$(shell $(FIND) $(JDK_TOPDIR)/src/share/demo/nbproject/ -type f))
-$(JDK_OUTPUTDIR)/newdemo/nbproject/% : $(JDK_TOPDIR)/src/share/demo/nbproject/%
+$(JDK_OUTPUTDIR)/demo/nbproject/% : $(JDK_TOPDIR)/src/share/demo/nbproject/%
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
##################################################################################################
-$(JDK_OUTPUTDIR)/newdemo/README: $(JDK_TOPDIR)/src/share/demo/README
+$(JDK_OUTPUTDIR)/demo/README: $(JDK_TOPDIR)/src/share/demo/README
$(MKDIR) -p $(@D)
$(CP) $< $@
-BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/README
+BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/README
##################################################################################################
ifeq ($(OPENJDK_TARGET_OS), solaris)
-$(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller/% : $(JDK_TOPDIR)/src/solaris/demo/jni/Poller/%
+$(JDK_OUTPUTDIR)/democlasses/jni/Poller/% : $(JDK_TOPDIR)/src/solaris/demo/jni/Poller/%
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
-$(JDK_OUTPUTDIR)/newdemo/jni/Poller/README.txt : $(JDK_TOPDIR)/src/solaris/demo/jni/Poller/README.txt
+$(JDK_OUTPUTDIR)/demo/jni/Poller/README.txt : $(JDK_TOPDIR)/src/solaris/demo/jni/Poller/README.txt
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) -f ug+w $@
-$(JDK_OUTPUTDIR)/newdemo/jni/Poller/Poller.jar : \
- $(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller/README.txt $(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller/Poller.c
+$(JDK_OUTPUTDIR)/demo/jni/Poller/Poller.jar : \
+ $(JDK_OUTPUTDIR)/democlasses/jni/Poller/README.txt $(JDK_OUTPUTDIR)/democlasses/jni/Poller/Poller.c
$(eval $(call SetupJavaCompilation,BUILD_DEMO_POLLER_JAR,\
SETUP:=GENERATE_USINGJDKBYTECODE, \
SRC:=$(JDK_TOPDIR)/src/solaris/demo/jni/Poller, \
- BIN:=$(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller, \
- HEADERS:=$(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller, \
- JAR:=$(JDK_OUTPUTDIR)/newdemo/jni/Poller/Poller.jar, \
+ BIN:=$(JDK_OUTPUTDIR)/democlasses/jni/Poller, \
+ HEADERS:=$(JDK_OUTPUTDIR)/democlasses/jni/Poller, \
+ JAR:=$(JDK_OUTPUTDIR)/demo/jni/Poller/Poller.jar, \
MANIFEST:=$(JDK_TOPDIR)/make/tools/manifest.mf, \
- SRCZIP:=$(JDK_OUTPUTDIR)/newdemo/jni/Poller/src.zip, \
- COPY := README.txt Poller.c, \
- JARMAIN := Client))
+ SRCZIP:=$(JDK_OUTPUTDIR)/demo/jni/Poller/src.zip, \
+ COPY:=README.txt Poller.c, \
+ JARMAIN:=Client))
-BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/jni/Poller/Poller.jar $(JDK_OUTPUTDIR)/newdemo/jni/Poller/src.zip \
- $(JDK_OUTPUTDIR)/newdemo/jni/Poller/README.txt
+BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/jni/Poller/Poller.jar $(JDK_OUTPUTDIR)/demo/jni/Poller/src.zip \
+ $(JDK_OUTPUTDIR)/demo/jni/Poller/README.txt
$(eval $(call SetupNativeCompilation,BUILD_LIBPOLLER,\
SRC:=$(JDK_TOPDIR)/src/solaris/demo/jni/Poller, \
- LANG := C, \
- CFLAGS:=$(CFLAGS_JDKLIB) $(C_O_FLAG_NORM) $(SHARED_LIBRARY_FLAGS) \
- -I$(JDK_OUTPUTDIR)/newdemoclasses/jni/Poller, \
+ LANG:=C,\
+ OPTIMIZATION:=LOW,\
+ CFLAGS:=$(CFLAGS_JDKLIB) $(SHARED_LIBRARY_FLAGS) \
+ -I$(JDK_OUTPUTDIR)/democlasses/jni/Poller, \
LDFLAGS:=$(LDFLAGS_JDKLIB), \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/newdemoobjs/jni/Poller,\
- OUTPUT_DIR:=$(JDK_OUTPUTDIR)/newdemoobjs, \
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/demoobjs/jni/Poller,\
+ OUTPUT_DIR:=$(JDK_OUTPUTDIR)/demoobjs, \
LIBRARY:=Poller))
#
# We can only compile native code after jar has been build (since we depend on generated .h files)
#
-$(JDK_OUTPUTDIR)/newdemoobjs/jni/Poller/Poller.o : $(JDK_OUTPUTDIR)/newdemo/jni/Poller/Poller.jar
+$(JDK_OUTPUTDIR)/demoobjs/jni/Poller/Poller.o : $(JDK_OUTPUTDIR)/demo/jni/Poller/Poller.jar
-$(JDK_OUTPUTDIR)/newdemo/jni/Poller/lib/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX) : \
- $(JDK_OUTPUTDIR)/newdemoobjs/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX)
+$(JDK_OUTPUTDIR)/demo/jni/Poller/lib/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX) : \
+ $(JDK_OUTPUTDIR)/demoobjs/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX)
$(MKDIR) -p $(@D)
$(CP) $< $@
-BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/jni/Poller/lib/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX)
+BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/jni/Poller/lib/$(LIBRARY_PREFIX)Poller$(SHARED_LIBRARY_SUFFIX)
endif
@@ -417,20 +453,20 @@
ifndef OPENJDK
DB_DEMO_ZIPFILE := $(shell $(FIND) $(JDK_TOPDIR)/src/closed/share/db -name "*demo*.zip")
- $(JDK_OUTPUTDIR)/newdemo/_the.db.unzipped: $(DB_DEMO_ZIPFILE)
+ $(JDK_OUTPUTDIR)/demo/_the.db.unzipped: $(DB_DEMO_ZIPFILE)
$(MKDIR) -p $(@D)
- $(RM) -rf $(JDK_OUTPUTDIR)/newdemo/db $(JDK_OUTPUTDIR)/newdemo/demo
- $(CD) $(JDK_OUTPUTDIR)/newdemo && $(UNZIP) -o $<
- $(MV) $(JDK_OUTPUTDIR)/newdemo/demo $(JDK_OUTPUTDIR)/newdemo/db
+ $(RM) -r $(JDK_OUTPUTDIR)/demo/db $(JDK_OUTPUTDIR)/demo/demo
+ $(CD) $(JDK_OUTPUTDIR)/demo && $(UNZIP) -o $<
+ $(MV) $(JDK_OUTPUTDIR)/demo/demo $(JDK_OUTPUTDIR)/demo/db
$(TOUCH) $@
# Copy this after the unzip above to avoid race with directory creation and mv command.
- $(JDK_OUTPUTDIR)/newdemo/db/README-JDK-DEMOS.html: \
+ $(JDK_OUTPUTDIR)/demo/db/README-JDK-DEMOS.html: \
$(JDK_TOPDIR)/src/closed/share/db/README-JDK-DEMOS.html \
- | $(JDK_OUTPUTDIR)/newdemo/_the.db.unzipped
+ | $(JDK_OUTPUTDIR)/demo/_the.db.unzipped
$(MKDIR) -p $(@D)
$(CP) '$<' '$@'
- BUILD_DEMOS += $(JDK_OUTPUTDIR)/newdemo/_the.db.unzipped $(JDK_OUTPUTDIR)/newdemo/db/README-JDK-DEMOS.html
+ BUILD_DEMOS += $(JDK_OUTPUTDIR)/demo/_the.db.unzipped $(JDK_OUTPUTDIR)/demo/db/README-JDK-DEMOS.html
endif
##################################################################################################
--- a/jdk/makefiles/CompileJavaClasses.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CompileJavaClasses.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -45,10 +45,6 @@
com/sun/tools/example/debug/gui \
com/oracle/security
-ifeq ($(OPENJDK_TARGET_OS)-$(ARCH_DATA_MODEL),windows-64)
- EXCLUDES += sun/security/pkcs11
-endif
-
ifdef OPENJDK
EXCLUDES+= sun/dc \
com/sun/jmx/snmp \
@@ -59,6 +55,13 @@
ifndef OPENJDK
# There exists two versions of this file...
EXFILES := $(JDK_TOPDIR)/src/share/classes/javax/crypto/JarVerifier.java
+
+ ifeq ($(OPENJDK_TARGET_OS),windows)
+ # This gets built on unix platforms implicitly in the old build even though
+ # it's excluded in the closed build.
+ EXCLUDES+=sun/java2d/pisces
+ endif
+
endif
ifneq ($(OPENJDK_TARGET_OS),solaris)
@@ -90,12 +93,14 @@
# Exclude Window security related files in src/share/classes
EXFILES+=NTLoginModule.java \
NTSystem.java
-
+else
+ EXFILES+=UnixLoginModule.java \
+ UnixSystem.java
endif
ifeq ($(OPENJDK_TARGET_OS),windows)
# Don't build GTK L&F on Windows
- EXCLUDES+= com/sun/java/swing/plaf/gtk
+ EXCLUDES+=com/sun/java/swing/plaf/gtk
endif
ifneq ($(OPENJDK_TARGET_OS),linux)
@@ -115,6 +120,9 @@
sun/nio/fs/BsdFileSystem.java \
sun/nio/fs/BsdFileSystemProvider.java \
sun/nio/fs/BsdNativeDispatcher.java \
+ sun/nio/fs/MacOSXFileSystemProvider.java \
+ sun/nio/fs/MacOSXFileSystem.java \
+ sun/nio/fs/MacOSXNativeDispatcher.java \
sun/tools/attach/BsdAttachProvider.java \
sun/tools/attach/BsdVirtualMachine.java
endif
@@ -122,7 +130,7 @@
# Exclude BreakIterator classes that are just used in compile process to generate
# data files and shouldn't go in the product
EXFILES+=sun/text/resources/BreakIteratorRules.java \
- sun/text/resources/BreakIteratorRules_th.java
+ sun/text/resources/BreakIteratorRules_th.java
# TODO: Add BUILD_HEADLESS_ONLY to configure?
ifdef BUILD_HEADLESS_ONLY
@@ -245,7 +253,7 @@
ifndef OPENJDK
CLOSED_SRC_DIRS:=$(JDK_TOPDIR)/src/closed/share/classes \
- $(JDK_TOPDIR)/src/closed/$(LEGACY_OPENJDK_TARGET_OS_API)/classes
+ $(JDK_TOPDIR)/src/closed/$(OPENJDK_TARGET_OS_API_DIR)/classes
endif
MACOSX_SRC_DIRS :=
@@ -257,7 +265,8 @@
$(JDK_TOPDIR)/src/solaris/classes/sun/java2d/BackBufferCapsProvider.java \
$(JDK_TOPDIR)/src/solaris/classes/java/net/DefaultInterface.java \
$(JDK_TOPDIR)/src/solaris/classes/java/lang/ClassLoaderHelper.java \
- $(JDK_TOPDIR)/src/solaris/classes/sun/util/locale/provider/HostLocaleProviderAdapterImpl.java
+ $(JDK_TOPDIR)/src/solaris/classes/sun/util/locale/provider/HostLocaleProviderAdapterImpl.java \
+ $(JDK_TOPDIR)/src/solaris/classes/sun/nio/fs/GnomeFileTypeDetector.java
# JObjC.jar contains 1.5 byte-code...so skip it here :-(
# MACOSX_SRC_DIRS += $(JDK_TOPDIR)/src/macosx/native/jobjc/src
@@ -273,14 +282,21 @@
$(MKDIR) -p $(@D)
$(CP) $< $@
+# The JDK_USER_DEFINED_FILTER is a poor man's incremental build: by specifying
+# JDK_FILTER at the make command line, only a subset of the JDK java files will
+# be recompiled. If multiple paths are separated by comma, convert that into a
+# space separated list.
+JDK_USER_DEFINED_FILTER:=$(strip $(subst $(COMMA),$(SPACE),$(JDK_FILTER)))
+
$(eval $(call SetupJavaCompilation,BUILD_JDK,\
SETUP:=GENERATE_JDKBYTECODE,\
SRC:=$(JDK_TOPDIR)/src/share/classes \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes \
$(MACOSX_SRC_DIRS) \
$(JDK_OUTPUTDIR)/gensrc \
$(JDK_OUTPUTDIR)/gensrc_swing/javax/swing/beaninfo \
$(CLOSED_SRC_DIRS),\
+ INCLUDES:=$(JDK_USER_DEFINED_FILTER),\
EXCLUDES:=$(EXCLUDES),\
EXCLUDE_FILES:=$(EXFILES),\
BIN:=$(JDK_OUTPUTDIR)/classes,\
@@ -360,13 +376,12 @@
$(eval $(call SetupJavaCompiler,GENERATE_15BYTECODE,\
JAVAC:=$(JAVAC),\
FLAGS:=-source 1.5 -target 1.5 -g -bootclasspath $(BOOT_RTJAR) -cp $(JDK_OUTPUTDIR)/../langtools/dist/lib/classes.jar $(DISABLE_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
$(eval $(call SetupJavaCompilation,BUILD_JOBJC_JAR,\
SETUP:=GENERATE_15BYTECODE,\
+ DISABLE_SJAVAC:=true,\
SRC:=$(JDK_TOPDIR)/src/macosx/native/jobjc/src/core/java \
$(JDK_TOPDIR)/src/macosx/native/jobjc/src/runtime-additions/java \
$(JDK_OUTPUTDIR)/gensrc, \
--- a/jdk/makefiles/CompileLaunchers.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CompileLaunchers.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -1,511 +1,557 @@
-#
-# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-defalt: all
-
-include $(SPEC)
-include MakeBase.gmk
-include NativeCompilation.gmk
-
-# Setup the java compilers for the JDK build.
-include Setup.gmk
-
-# Build tools
-include Tools.gmk
-
-BUILD_LAUNCHERS=
-
-define SetupLauncher
- # TODO: Fix mapfile on solaris. Won't work with ld as linker.
- # Parameter 1 is the name of the launcher (java,javac,jar...)
- # Parameter 2 is extra CFLAGS
- # Parameter 3 is extra LDFLAGS
- # Parameter 4 is extra LDFLAGS_SUFFIX_posix
- # Parameter 5 is extra LDFLAGS_SUFFIX_winapi
- # Parameter 6 is optional Windows JLI library (full path)
- # Parameter 7 is optional Windows resource (RC) flags
- # Parameter 8 is optional Windows version resource file (.rc)
- # Parameter 9 is different output dir
- # Parameter 10 is FULL DEBUG SYMBOLS (set value to turn OFF, since most(all) seems to have it)
-
- $1_WINDOWS_JLI_LIB:=$(JDK_OUTPUTDIR)/objs/libjli/jli.lib
- ifneq ($6,)
- $1_WINDOWS_JLI_LIB:=$6
- endif
- $1_VERSION_INFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc
- ifneq ($8,)
- $1_VERSION_INFO_RESOURCE:=$8
- endif
-
- $1_LDFLAGS := $3
- ifeq ($(OPENJDK_TARGET_OS), macosx)
- $1_LDFLAGS += -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
- -F/System/Library/Frameworks/ApplicationServices.framework/Frameworks
- endif
-
- $1_LDFLAGS_SUFFIX :=
- ifeq ($(USE_EXTERNAL_LIBZ), true)
- $1_LDFLAGS_SUFFIX += -lz
- endif
-
- ifeq ($(OPENJDK_TARGET_OS), macosx)
- $1_LDFLAGS_SUFFIX += -Wl,-all_load $(JDK_OUTPUTDIR)/objs/libjli_static.a \
- -framework Cocoa -framework Security -framework ApplicationServices \
- -sectcreate __TEXT __info_plist $(JDK_TOPDIR)/src/macosx/lib/Info-cmdline.plist
- endif
-
-
- $1_OUTPUT_DIR_ARG:=$9
- ifeq (,$$($1_OUTPUT_DIR_ARG))
- $1_OUTPUT_DIR_ARG:=$(JDK_OUTPUTDIR)/bin
- endif
-
- $1_DEBUG_SYMBOLS:=yes
- ifneq (,$(10))
- $1_DEBUG_SYMBOLS:=
- endif
-
- $1_OPTIMIZATION:= LOW
-
- # TODO: maybe it's better to move this if-statement out of this function
- ifeq ($(1),java)
- $1_OPTIMIZATION:=HIGH
- endif
-
- $(call SetupNativeCompilation,BUILD_LAUNCHER_$1,\
- SRC:=$(JDK_TOPDIR)/src/share/bin,\
- INCLUDE_FILES:=main.c,\
- LANG:=C,\
- OPTIMIZATION :=$$($1_OPTIMIZATION), \
- CFLAGS:=$(CFLAGS_JDKEXE) \
- -I$(JDK_TOPDIR)/src/share/bin \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin \
- -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS)/bin \
- -DFULL_VERSION='"$(FULL_VERSION)"' \
- -DJDK_MAJOR_VERSION='"$(JDK_MAJOR_VERSION)"' \
- -DJDK_MINOR_VERSION='"$(JDK_MINOR_VERSION)"' \
- -DLIBARCHNAME='"$(ARCH)"' \
- -DLAUNCHER_NAME='"java"' \
- -DPROGNAME='"$1"' $(DPACKAGEPATH) \
- $2,\
- CFLAGS_linux:=-fPIC,\
- CFLAGS_solaris:=-KPIC -DHAVE_GETHRTIME,\
- LDFLAGS:=$(LDFLAGS_JDKEXE) \
- $(call SET_SHARED_LIBRARY_ORIGIN,../lib/$(LIBARCH)/jli) \
- $(call SET_SHARED_LIBRARY_ORIGIN,../jre/lib/$(LIBARCH)/jli) \
- $$($1_LDFLAGS),\
- MAPFILE := $(JDK_TOPDIR)/makefiles/mapfiles/launchers/mapfile-$(ARCH), \
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKEXE_SUFFIX) $$($1_LDFLAGS_SUFFIX),\
- LDFLAGS_SUFFIX_posix:=$4 -lc,\
- LDFLAGS_SUFFIX_winapi:=$$($1_WINDOWS_JLI_LIB) \
- $(JDK_OUTPUTDIR)/objs/libjava/java.lib advapi32.lib $5,\
- LDFLAGS_SUFFIX_solaris := -lthread $(LIBDL), \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/$1_objs,\
- OUTPUT_DIR:=$$($1_OUTPUT_DIR_ARG),\
- PROGRAM:=$1,\
- DEBUG_SYMBOLS:=$$($1_DEBUG_SYMBOLS),\
- VERSIONINFO_RESOURCE:=$$($1_VERSION_INFO_RESOURCE),\
- RC_FLAGS:=$(RC_FLAGS)\
- /D "JDK_FNAME=$1$(EXE_SUFFIX)" \
- /D "JDK_INTERNAL_NAME=$1" \
- /D "JDK_FTYPE=0x1L" \
- $7,\
- MANIFEST:=$(JDK_TOPDIR)/src/windows/resource/java.manifest)
-
- BUILD_LAUNCHERS += $$(BUILD_LAUNCHER_$1)
-
- ifeq ($(OPENJDK_TARGET_OS),macosx)
- $$(BUILD_LAUNCHER_$1) : $(JDK_OUTPUTDIR)/objs/libjli_static.a
- endif
-
- ifeq ($(OPENJDK_TARGET_OS),windows)
- $$(BUILD_LAUNCHER_$1) : $(JDK_OUTPUTDIR)/objs/libjava/java.lib \
- $$($1_WINDOWS_JLI_LIB)
- endif
-endef
-
-##########################################################################################
-
-XLIBS:=$(X_LIBS) -lX11
-ifeq ($(OPENJDK_TARGET_OS),macosx)
- DPACKAGEPATH:=-DPACKAGE_PATH='"$(PACKAGE_PATH)"'
- XLIBS:=
-endif
-
-ifdef OPENJDK
- JAVA_RC_FLAGS += -i "$(JDK_TOPDIR)/src/windows/resource/icons"
-else
- JAVA_RC_FLAGS += -i "$(JDK_TOPDIR)/src/closed/windows/native/sun/windows"
-endif
-
-$(eval $(call SetupLauncher,java,\
- -DEXPAND_CLASSPATH_WILDCARDS,,,user32.lib comctl32.lib,\
- $(JDK_OUTPUTDIR)/objs/jli_static.lib,$(JAVA_RC_FLAGS),\
- $(JDK_TOPDIR)/src/windows/resource/java.rc))
-
-ifeq ($(OPENJDK_TARGET_OS),windows)
- $(eval $(call SetupLauncher,javaw,\
- -DEXPAND_CLASSPATH_WILDCARDS,,,user32.lib comctl32.lib,\
- $(JDK_OUTPUTDIR)/objs/jli_static.lib,$(JAVA_RC_FLAGS),\
- $(JDK_TOPDIR)/src/windows/resource/java.rc))
-endif
-
-ifeq ($(OPENJDK_TARGET_OS),solaris)
- THREAD_LIB:=-lthread
-endif
-ifeq ($(OPENJDK_TARGET_OS),linux)
- THREAD_LIB:=-lpthread
-endif
-
-ifndef BUILD_HEADLESS_ONLY
-$(eval $(call SetupLauncher,appletviewer,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.applet.Main"$(COMMA) }',,\
- $(THREAD_LIB) $(XLIBS) -ldl))
-endif
-
-$(eval $(call SetupLauncher,extcheck,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.extcheck.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,idlj,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.corba.se.idl.toJavaPortable.Compile"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jar,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jar.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jarsigner,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.JarSigner"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,javac,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javac.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,javadoc,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javadoc.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,javah,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javah.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,javap,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javap.Main"$(COMMA) }'))
-
-BUILD_LAUNCHER_jconsole_CPPFLAGS_windows:=-DJAVAW
-BUILD_LAUNCHER_jconsole_LDFLAGS_windows:=user32.lib
-
-$(eval $(call SetupLauncher,jconsole,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "-J-Djconsole.showOutputViewer"$(COMMA) "sun.tools.jconsole.JConsole"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/jconsole.jar"$(COMMA) "/lib/tools.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jdb,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.example.debug.tty.TTY"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jhat,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.hat.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jinfo,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
- "sun.tools.jinfo.JInfo"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jmap,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
- "sun.tools.jmap.JMap"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jps,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jps.Jps"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jrunscript,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.script.shell.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jsadebugd,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.jvm.hotspot.jdi.SADebugServer"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jstack,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
- "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
- "sun.tools.jstack.JStack"$(COMMA) }' \
- -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
-
-$(eval $(call SetupLauncher,jstat,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jstat.Jstat"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jstatd,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jstatd.Jstatd"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,keytool,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.KeyTool"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,native2ascii,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.native2ascii.Main"$(COMMA) }'))
-
-ifndef BUILD_HEADLESS_ONLY
-$(eval $(call SetupLauncher,policytool,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.policytool.PolicyTool"$(COMMA) }'))
-endif
-
-$(eval $(call SetupLauncher,rmic,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.rmic.Main"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,schemagen,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.jxc.SchemaGenerator"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,serialver,\
- -DEXPAND_CLASSPATH_WILDCARDS \
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.serialver.SerialVer"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,xjc,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.xjc.Driver"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,wsgen,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.ws.WsGen"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,wsimport,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.ws.WsImport"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,orbd,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
- "-J-Dcom.sun.CORBA.activation.DbDir=./orb.db"$(COMMA) \
- "-J-Dcom.sun.CORBA.activation.Port=1049"$(COMMA) \
- "-J-Dcom.sun.CORBA.POA.ORBServerId=1"$(COMMA) \
- "com.sun.corba.se.impl.activation.ORBD"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,servertool,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.corba.se.impl.activation.ServerTool"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,tnameserv,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
- "-J-Dcom.sun.CORBA.activation.DbDir=./orb.db"$(COMMA) \
- "-J-Djava.util.logging.LoggingPermission=contol"$(COMMA) \
- "-J-Dcom.sun.CORBA.POA.ORBServerId=1"$(COMMA) \
- "com.sun.corba.se.impl.naming.cosnaming.TransientNameServer"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,pack200,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.java.util.jar.pack.Driver"$(COMMA) "--pack" }'))
-
-$(eval $(call SetupLauncher,rmid,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.server.Activation"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,rmiregistry,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.registry.RegistryImpl"$(COMMA) }'))
-
-$(eval $(call SetupLauncher,jcmd,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jcmd.JCmd"$(COMMA) }'))
-
-ifeq ($(OPENJDK_TARGET_OS),windows)
- $(eval $(call SetupLauncher,kinit,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Kinit"$(COMMA) }'))
-
- $(eval $(call SetupLauncher,klist,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Klist"$(COMMA) }'))
-
- $(eval $(call SetupLauncher,ktab,\
- -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Ktab"$(COMMA) }'))
-endif
-
-##########################################################################################
-# The order of the object files on the link command line affects the size of the resulting
-# binary (at least on linux) which causes the size to differ between old and new build.
-ifeq ($(USE_EXTERNAL_LIBZ), true)
-UNPACKEXE_CFLAGS := -DSYSTEM_ZLIB
-UNPACKEXE_ZIPOBJS := -lz
-else
-UNPACKEXE_CFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
-UNPACKEXE_ZIPOBJS := $(JDK_OUTPUTDIR)/objs/libzip/zcrc32$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/deflate$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/trees$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/zadler32$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/compress$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/zutil$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/inflate$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/infback$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/inftrees$(OBJ_SUFFIX) \
- $(JDK_OUTPUTDIR)/objs/libzip/inffast$(OBJ_SUFFIX)
-
-endif
-
-ifeq ($(OPENJDK_TARGET_CPU_ARCH), sparc)
- UNPACKEXE_CFLAGS += -xregs=no%appl
-endif
-
-$(eval $(call SetupNativeCompilation,BUILD_UNPACKEXE,\
- SRC:=$(JDK_TOPDIR)/src/share/native/com/sun/java/util/jar/pack,\
- EXCLUDE_FILES:=jni.cpp,\
- LANG:=C,\
- OPTIMIZATION := LOW, \
- CFLAGS:=$(UNPACKEXE_CFLAGS) $(CXXFLAGS_JDKEXE)\
- -DFULL, \
- CFLAGS_release:=-DPRODUCT,\
- CFLAGS_linux:=-fPIC,\
- CFLAGS_solaris := -KPIC, \
- CFLAGS_macosx := -fPIC, \
- MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libunpack/mapfile-vers-unpack200, \
- LDFLAGS:=$(LDFLAGS_JDKEXE) \
- $(call SET_SHARED_LIBRARY_ORIGIN), \
- LDFLAGS_SUFFIX:=$(UNPACKEXE_ZIPOBJS) $(LIBCXX),\
- LDFLAGS_SUFFIX_solaris:=-lc,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/unpackexe,\
- OUTPUT_DIR:=$(JDK_OUTPUTDIR)/bin,\
- PROGRAM:=unpack200,\
- VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
- RC_FLAGS:=$(RC_FLAGS)\
- /D "JDK_FNAME=unpack200.exe" \
- /D "JDK_INTERNAL_NAME=unpack200" \
- /D "JDK_FTYPE=0x1L",\
- MANIFEST:=$(JDK_TOPDIR)/src/windows/resource/unpack200_proto.exe.manifest))
-
-ifneq ($(USE_EXTERNAL_LIBZ), true)
-
-$(BUILD_UNPACKEXE) : $(UNPACKEXE_ZIPOBJS)
-
-endif
-
-BUILD_LAUNCHERS += $(BUILD_UNPACKEXE)
-
-##########################################################################################
-
-
-BUILD_JEXEC :=
-BUILD_JEXEC_SRC :=
-BUILD_JEXEC_INC :=
-BUILD_JEXEC_DST_DIR := $(JDK_OUTPUTDIR)/lib/$(LIBARCH)
-
-#
-# UNHANDLED:
-# - COMPILE_APPROACH = normal
-#
-
-#
-# jdk/make/java/Makefile
-#
-ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifeq ($(ARCH_DATA_MODEL), 32)
- BUILD_JEXEC := 1
- endif
-endif
-
-ifeq ($(OPENJDK_TARGET_OS), linux)
- BUILD_JEXEC := 1
-endif # OPENJDK_TARGET_OS
-
-#
-# jdk/make/java/jexec/Makefile
-#
-ifeq ($(BUILD_JEXEC), 1)
-
- ifeq ($(OPENJDK_TARGET_OS),windows)
- else ifeq ($(OPENJDK_TARGET_OS),macosx)
- BUILD_JEXEC_SRC := $(JDK_TOPDIR)/src/macosx/bin
- else
- BUILD_JEXEC_SRC := $(JDK_TOPDIR)/src/solaris/bin
- endif
-
- ifeq ($(OPENJDK_TARGET_OS), linux)
- BUILD_JEXEC_DST_DIR := $(JDK_OUTPUTDIR)/lib
- BUILD_JEXEC_INC += -I$(JDK_TOPDIR)/src/share/bin
- endif
-endif
-
-#
-# Note that the two Makefile's seems to contradict each other,
-# and that src/macosx/bin/jexec.c seems unused
-#
-ifneq ($(BUILD_JEXEC_SRC),)
- $(eval $(call SetupNativeCompilation,BUILD_JEXEC,\
- SRC:=$(BUILD_JEXEC_SRC),\
- INCLUDE_FILES:=jexec.c,\
- LANG:=C,\
- OPTIMIZATION := LOW, \
- CFLAGS:=$(CFLAGS_JDKEXE)\
- $(BUILD_JEXEC_INC), \
- LDFLAGS:=$(LDFLAGS_JDKEXE), \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/jexec_obj,\
- OUTPUT_DIR:=$(BUILD_JEXEC_DST_DIR),\
- PROGRAM:=jexec))
-
- BUILD_LAUNCHERS += $(BUILD_JEXEC)
-endif
-
-##########################################################################################
-
-#
-# The java-rmi.cgi script in bin/ only gets delivered in certain situations
-#
-JAVA_RMI_CGI:=$(JDK_OUTPUTDIR)/bin/java-rmi.cgi
-ifeq ($(OPENJDK_TARGET_OS), linux)
- BUILD_LAUNCHERS += $(JAVA_RMI_CGI)
-endif
-ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifeq ($(ARCH_DATA_MODEL), 32)
- BUILD_LAUNCHERS += $(JAVA_RMI_CGI)
- endif
-endif
-
-# TODO:
-# On windows java-rmi.cgi shouldn't be bundled since Java 1.2, but has been built all
-# this time anyway. Since jdk6, it has been built from the wrong source and resulted
-# in a copy of the standard java launcher named "java-rmi.exe" ending up in the final
-# images bin dir. This weird behavior is mimicked here in the converted makefiles for
-# now. Should probably just be deleted.
-# http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6512052
-ifeq ($(OPENJDK_TARGET_OS_API),winapi)
- $(eval $(call SetupLauncher,java-rmi,\
- -DEXPAND_CLASSPATH_WILDCARDS,\
- $(call SET_SHARED_LIBRARY_MAPFILE,$(JDK_TOPDIR)/makefiles/java/main/java/mapfile-$(ARCH)),\
- ,,,,,$(JDK_OUTPUTDIR)/objs))
-
- $(JAVA_RMI_CGI): $(BUILD_LAUNCHER_java-rmi)
- $(MKDIR) -p $(@D)
- $(CP) $< $@
-
- BUILD_LAUNCHERS += $(JAVA_RMI_CGI)
-else
- $(JAVA_RMI_CGI): $(JDK_TOPDIR)/src/solaris/bin/java-rmi.cgi.sh
- $(MKDIR) -p $(@D)
- $(CP) $< $@
- $(CHMOD) a+x $@
-endif
-
-##########################################################################################
-
-$(BUILD_LAUNCHERS) : $(JDK_TOPDIR)/makefiles/CompileLaunchers.gmk
-
-all: $(BUILD_LAUNCHERS)
-
-.PHONY: all
+#
+# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+defalt: all
+
+include $(SPEC)
+include MakeBase.gmk
+include NativeCompilation.gmk
+
+# Setup the java compilers for the JDK build.
+include Setup.gmk
+
+# Build tools
+include Tools.gmk
+
+BUILD_LAUNCHERS=
+
+# When building a legacy overlay image (on solaris 64 bit), the launchers
+# need to be built with a different rpath and a different output dir.
+ifeq ($(OVERLAY_IMAGES),true)
+ ORIGIN_ROOT:=/../..
+ OUTPUT_SUBDIR:=$(OPENJDK_TARGET_CPU_ISADIR)
+else
+ ORIGIN_ROOT:=/..
+endif
+
+ifeq ($(OPENJDK_TARGET_OS), macosx)
+ ORIGIN_ARG:=$(call SET_EXECUTABLE_ORIGIN)
+else
+ ORIGIN_ARG:=$(call SET_EXECUTABLE_ORIGIN,$(ORIGIN_ROOT)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/jli) \
+ $(call SET_EXECUTABLE_ORIGIN,$(ORIGIN_ROOT)/jre/lib$(OPENJDK_TARGET_CPU_LIBDIR)/jli)
+endif
+
+#
+# Applications expect to be able to link against libjawt without invoking
+# System.loadLibrary("jawt") first. This was the behaviour described in the
+# devloper documentation of JAWT and what worked with OpenJDK6.
+#
+ifneq ($(findstring $(OPENJDK_TARGET_OS), linux solaris),)
+ ORIGIN_ARG+=$(call SET_EXECUTABLE_ORIGIN,$(ORIGIN_ROOT)/lib$(OPENJDK_TARGET_CPU_LIBDIR)) \
+ $(call SET_EXECUTABLE_ORIGIN,$(ORIGIN_ROOT)/jre/lib$(OPENJDK_TARGET_CPU_LIBDIR))
+endif
+
+define SetupLauncher
+ # TODO: Fix mapfile on solaris. Won't work with ld as linker.
+ # Parameter 1 is the name of the launcher (java,javac,jar...)
+ # Parameter 2 is extra CFLAGS
+ # Parameter 3 is extra LDFLAGS
+ # Parameter 4 is extra LDFLAGS_SUFFIX_posix
+ # Parameter 5 is extra LDFLAGS_SUFFIX_windows
+ # Parameter 6 is optional Windows JLI library (full path)
+ # Parameter 7 is optional Windows resource (RC) flags
+ # Parameter 8 is optional Windows version resource file (.rc)
+ # Parameter 9 is different output dir
+ # Parameter 10 if set, link statically with c runtime on windows.
+ # Parameter 11 if set, override plist file on macosx.
+
+ $1_WINDOWS_JLI_LIB:=$(JDK_OUTPUTDIR)/objs/libjli/jli.lib
+ ifneq ($6,)
+ $1_WINDOWS_JLI_LIB:=$6
+ endif
+ $1_VERSION_INFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc
+ ifneq ($8,)
+ $1_VERSION_INFO_RESOURCE:=$8
+ endif
+
+ $1_LDFLAGS := $3
+ $1_LDFLAGS_SUFFIX :=
+ ifeq ($(OPENJDK_TARGET_OS), macosx)
+ $1_PLIST_FILE:=Info-cmdline.plist
+ ifneq ($(11),)
+ $1_PLIST_FILE:=$(11)
+ endif
+
+ $1_LDFLAGS += -Wl,-all_load $(JDK_OUTPUTDIR)/objs/libjli_static.a \
+ -framework Cocoa -framework Security -framework ApplicationServices \
+ -sectcreate __TEXT __info_plist $(JDK_TOPDIR)/src/macosx/lib/$$($1_PLIST_FILE)
+ $1_LDFLAGS_SUFFIX += -pthread
+ endif
+
+ ifeq ($(USE_EXTERNAL_LIBZ), true)
+ $1_LDFLAGS_SUFFIX += -lz
+ endif
+
+ $1_OUTPUT_DIR_ARG:=$9
+ ifeq (,$$($1_OUTPUT_DIR_ARG))
+ $1_OUTPUT_DIR_ARG:=$(JDK_OUTPUTDIR)/bin
+ endif
+
+ # TODO: maybe it's better to move this if-statement out of this function
+ ifeq ($1,java)
+ $1_OPTIMIZATION_ARG:=HIGH
+ $1_LDFLAGS_solaris:=-R$(OPENWIN_HOME)/lib$(OPENJDK_TARGET_CPU_ISADIR)
+ else
+ $1_OPTIMIZATION_ARG:=LOW
+ endif
+
+ $1_CFLAGS:=$(CFLAGS_JDKEXE)
+ ifeq ($(10),true)
+ $1_CFLAGS:=$(filter-out -MD,$(CFLAGS_JDKEXE))
+ endif
+
+ $(call SetupNativeCompilation,BUILD_LAUNCHER_$1,\
+ SRC:=$(JDK_TOPDIR)/src/share/bin,\
+ INCLUDE_FILES:=main.c,\
+ LANG:=C,\
+ OPTIMIZATION:=$$($1_OPTIMIZATION_ARG), \
+ CFLAGS:=$$($1_CFLAGS) \
+ -I$(JDK_TOPDIR)/src/share/bin \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS)/bin \
+ -DFULL_VERSION='"$(FULL_VERSION)"' \
+ -DJDK_MAJOR_VERSION='"$(JDK_MAJOR_VERSION)"' \
+ -DJDK_MINOR_VERSION='"$(JDK_MINOR_VERSION)"' \
+ -DLIBARCHNAME='"$(OPENJDK_TARGET_CPU_LEGACY)"' \
+ -DLAUNCHER_NAME='"$(LAUNCHER_NAME)"' \
+ -DPROGNAME='"$1"' $(DPACKAGEPATH) \
+ $2,\
+ CFLAGS_linux:=-fPIC,\
+ CFLAGS_solaris:=-KPIC -DHAVE_GETHRTIME,\
+ LDFLAGS:=$(LDFLAGS_JDKEXE) \
+ $(ORIGIN_ARG) \
+ $$($1_LDFLAGS),\
+ LDFLAGS_macosx:=$(call SET_SHARED_LIBRARY_NAME,$1),\
+ LDFLAGS_linux:=-lpthread \
+ $(call SET_SHARED_LIBRARY_NAME,$(LIBRARY_PREFIX)$(SHARED_LIBRARY_SUFFIX)),\
+ LDFLAGS_solaris:=$$($1_LDFLAGS_solaris) \
+ $(call SET_SHARED_LIBRARY_NAME,$(LIBRARY_PREFIX)$(SHARED_LIBRARY_SUFFIX)),\
+ MAPFILE := $(JDK_TOPDIR)/makefiles/mapfiles/launchers/mapfile-$(OPENJDK_TARGET_CPU), \
+ LDFLAGS_SUFFIX:=$(LDFLAGS_JDKEXE_SUFFIX) $$($1_LDFLAGS_SUFFIX),\
+ LDFLAGS_SUFFIX_posix:=$4,\
+ LDFLAGS_SUFFIX_windows:=$$($1_WINDOWS_JLI_LIB) \
+ $(JDK_OUTPUTDIR)/objs/libjava/java.lib advapi32.lib $5,\
+ LDFLAGS_SUFFIX_linux:=-L$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/jli -ljli $(LIBDL) -lc, \
+ LDFLAGS_SUFFIX_solaris:=-L$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/jli -ljli -lthread $(LIBDL) -lc, \
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/$1_objs$(OUTPUT_SUBDIR),\
+ OUTPUT_DIR:=$$($1_OUTPUT_DIR_ARG)$(OUTPUT_SUBDIR),\
+ PROGRAM:=$1,\
+ DEBUG_SYMBOLS:=true,\
+ VERSIONINFO_RESOURCE:=$$($1_VERSION_INFO_RESOURCE),\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=$1$(EXE_SUFFIX)" \
+ /D "JDK_INTERNAL_NAME=$1" \
+ /D "JDK_FTYPE=0x1L" \
+ $7,\
+ MANIFEST:=$(JDK_TOPDIR)/src/windows/resource/java.manifest)
+
+ BUILD_LAUNCHERS += $$(BUILD_LAUNCHER_$1)
+
+ ifeq ($(OPENJDK_TARGET_OS),macosx)
+ $$(BUILD_LAUNCHER_$1) : $(JDK_OUTPUTDIR)/objs/libjli_static.a
+ endif
+
+ ifeq ($(OPENJDK_TARGET_OS),windows)
+ $$(BUILD_LAUNCHER_$1) : $(JDK_OUTPUTDIR)/objs/libjava/java.lib \
+ $$($1_WINDOWS_JLI_LIB)
+ endif
+endef
+
+##########################################################################################
+
+XLIBS:=$(X_LIBS) -lX11
+ifeq ($(OPENJDK_TARGET_OS),macosx)
+ DPACKAGEPATH:=-DPACKAGE_PATH='"$(PACKAGE_PATH)"'
+ XLIBS:=
+endif
+
+ifdef OPENJDK
+ JAVA_RC_FLAGS += -i "$(JDK_TOPDIR)/src/windows/resource/icons"
+else
+ JAVA_RC_FLAGS += -i "$(JDK_TOPDIR)/src/closed/windows/native/sun/windows"
+endif
+
+# On windows, the debuginfo files get the same name as for java.dll. Build
+# into another dir and copy selectively so debuginfo for java.dll isn't
+# overwritten.
+$(eval $(call SetupLauncher,java,\
+ -DEXPAND_CLASSPATH_WILDCARDS,,,user32.lib comctl32.lib,\
+ $(JDK_OUTPUTDIR)/objs/jli_static.lib,$(JAVA_RC_FLAGS),\
+ $(JDK_TOPDIR)/src/windows/resource/java.rc,$(JDK_OUTPUTDIR)/objs/java_objs,true))
+
+$(JDK_OUTPUTDIR)/bin$(OUTPUT_SUBDIR)/java$(EXE_SUFFIX): $(BUILD_LAUNCHER_java)
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(CP) $(JDK_OUTPUTDIR)/objs/java_objs$(OUTPUT_SUBDIR)/java$(EXE_SUFFIX) $@
+
+BUILD_LAUNCHERS += $(JDK_OUTPUTDIR)/bin$(OUTPUT_SUBDIR)/java$(EXE_SUFFIX)
+
+ifeq ($(OPENJDK_TARGET_OS),windows)
+ $(eval $(call SetupLauncher,javaw,\
+ -DJAVAW -DEXPAND_CLASSPATH_WILDCARDS,,,user32.lib comctl32.lib,\
+ $(JDK_OUTPUTDIR)/objs/jli_static.lib,$(JAVA_RC_FLAGS),\
+ $(JDK_TOPDIR)/src/windows/resource/java.rc,,true))
+endif
+
+
+ifndef BUILD_HEADLESS_ONLY
+$(eval $(call SetupLauncher,appletviewer,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.applet.Main"$(COMMA) }',,\
+ $(XLIBS)))
+endif
+
+$(eval $(call SetupLauncher,extcheck,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.extcheck.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,idlj,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.corba.se.idl.toJavaPortable.Compile"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jar,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jar.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jarsigner,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.JarSigner"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,javac,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javac.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,javadoc,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javadoc.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,javah,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javah.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,javap,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DNEVER_ACT_AS_SERVER_CLASS_MACHINE \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.javap.Main"$(COMMA) }'))
+
+BUILD_LAUNCHER_jconsole_CFLAGS_windows:=-DJAVAW
+BUILD_LAUNCHER_jconsole_LDFLAGS_windows:=user32.lib
+
+$(eval $(call SetupLauncher,jconsole,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "-J-Djconsole.showOutputViewer"$(COMMA) "sun.tools.jconsole.JConsole"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/jconsole.jar"$(COMMA) "/lib/tools.jar"$(COMMA) "/classes" }'))
+
+$(eval $(call SetupLauncher,jdb,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.example.debug.tty.TTY"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }'))
+
+$(eval $(call SetupLauncher,jhat,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.hat.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jinfo,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
+ "sun.tools.jinfo.JInfo"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }' \
+ ,,,,,,,,,Info-privileged.plist))
+
+$(eval $(call SetupLauncher,jmap,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
+ "sun.tools.jmap.JMap"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }' \
+ ,,,,,,,,,Info-privileged.plist))
+
+$(eval $(call SetupLauncher,jps,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jps.Jps"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jrunscript,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.script.shell.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jsadebugd,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.jvm.hotspot.jdi.SADebugServer"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }' \
+ ,,,,,,,,,Info-privileged.plist))
+
+$(eval $(call SetupLauncher,jstack,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useProcDebugger"$(COMMA) \
+ "-J-Dsun.jvm.hotspot.debugger.useWindbgDebugger"$(COMMA) \
+ "sun.tools.jstack.JStack"$(COMMA) }' \
+ -DAPP_CLASSPATH='{ "/lib/tools.jar"$(COMMA) "/lib/sa-jdi.jar"$(COMMA) "/classes" }' \
+ ,,,,,,,,,Info-privileged.plist))
+
+$(eval $(call SetupLauncher,jstat,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jstat.Jstat"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jstatd,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jstatd.Jstatd"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,keytool,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.KeyTool"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,native2ascii,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.native2ascii.Main"$(COMMA) }'))
+
+ifndef BUILD_HEADLESS_ONLY
+$(eval $(call SetupLauncher,policytool,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.tools.policytool.PolicyTool"$(COMMA) }',,\
+ $(XLIBS)))
+endif
+
+$(eval $(call SetupLauncher,rmic,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.rmic.Main"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,schemagen,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.jxc.SchemaGenerator"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,serialver,\
+ -DEXPAND_CLASSPATH_WILDCARDS \
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.serialver.SerialVer"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,xjc,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.xjc.Driver"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,wsgen,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.ws.WsGen"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,wsimport,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.tools.internal.ws.WsImport"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,orbd,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
+ "-J-Dcom.sun.CORBA.activation.DbDir=./orb.db"$(COMMA) \
+ "-J-Dcom.sun.CORBA.activation.Port=1049"$(COMMA) \
+ "-J-Dcom.sun.CORBA.POA.ORBServerId=1"$(COMMA) \
+ "com.sun.corba.se.impl.activation.ORBD"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,servertool,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.corba.se.impl.activation.ServerTool"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,tnameserv,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) \
+ "-J-Dcom.sun.CORBA.activation.DbDir=./orb.db"$(COMMA) \
+ "-J-Djava.util.logging.LoggingPermission=contol"$(COMMA) \
+ "-J-Dcom.sun.CORBA.POA.ORBServerId=1"$(COMMA) \
+ "com.sun.corba.se.impl.naming.cosnaming.TransientNameServer"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,pack200,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "com.sun.java.util.jar.pack.Driver"$(COMMA) "--pack" }'))
+
+$(eval $(call SetupLauncher,rmid,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.server.Activation"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,rmiregistry,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.rmi.registry.RegistryImpl"$(COMMA) }'))
+
+$(eval $(call SetupLauncher,jcmd,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.tools.jcmd.JCmd"$(COMMA) }'))
+
+ifeq ($(OPENJDK_TARGET_OS),windows)
+ $(eval $(call SetupLauncher,kinit,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Kinit"$(COMMA) }'))
+
+ $(eval $(call SetupLauncher,klist,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Klist"$(COMMA) }'))
+
+ $(eval $(call SetupLauncher,ktab,\
+ -DJAVA_ARGS='{ "-J-ms8m"$(COMMA) "sun.security.krb5.internal.tools.Ktab"$(COMMA) }'))
+endif
+
+##########################################################################################
+# The order of the object files on the link command line affects the size of the resulting
+# binary (at least on linux) which causes the size to differ between old and new build.
+ifeq ($(USE_EXTERNAL_LIBZ), true)
+UNPACKEXE_CFLAGS := -DSYSTEM_ZLIB
+UNPACKEXE_ZIPOBJS := -lz
+else
+UNPACKEXE_CFLAGS := -I$(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
+UNPACKEXE_ZIPOBJS := $(JDK_OUTPUTDIR)/objs/libzip/zcrc32$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/deflate$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/trees$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/zadler32$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/compress$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/zutil$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/inflate$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/infback$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/inftrees$(OBJ_SUFFIX) \
+ $(JDK_OUTPUTDIR)/objs/libzip/inffast$(OBJ_SUFFIX)
+
+endif
+
+ifeq ($(OPENJDK_TARGET_CPU_ARCH), sparc)
+ UNPACKEXE_CFLAGS += -xregs=no%appl
+endif
+
+UNPACKEXE_LANG:=C
+ifeq ($(OPENJDK_TARGET_OS),solaris)
+ UNPACKEXE_LANG:=C++
+endif
+
+$(eval $(call SetupNativeCompilation,BUILD_UNPACKEXE,\
+ SRC:=$(JDK_TOPDIR)/src/share/native/com/sun/java/util/jar/pack,\
+ EXCLUDE_FILES:=jni.cpp,\
+ LANG:=$(UNPACKEXE_LANG),\
+ OPTIMIZATION := LOW, \
+ CFLAGS:=$(UNPACKEXE_CFLAGS) $(CXXFLAGS_JDKEXE)\
+ -DFULL, \
+ CFLAGS_release:=-DPRODUCT,\
+ CFLAGS_linux:=-fPIC,\
+ CFLAGS_solaris := -KPIC, \
+ CFLAGS_macosx := -fPIC, \
+ MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libunpack/mapfile-vers-unpack200, \
+ LDFLAGS:=$(LDFLAGS_JDKEXE) $(LDFLAGS_CXX_JDK) \
+ $(call SET_SHARED_LIBRARY_NAME,$(LIBRARY_PREFIX)unpack$(SHARED_LIBRARY_SUFFIX)) \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(UNPACKEXE_ZIPOBJS),\
+ LDFLAGS_linux:=-lc,\
+ LDFLAGS_SUFFIX:=$(LIBCXX),\
+ LDFLAGS_SUFFIX_solaris:=-lc,\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/unpackexe$(OUTPUT_SUBDIR),\
+ OUTPUT_DIR:=$(JDK_OUTPUTDIR)/bin$(OUTPUT_SUBDIR),\
+ PROGRAM:=unpack200,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=unpack200.exe" \
+ /D "JDK_INTERNAL_NAME=unpack200" \
+ /D "JDK_FTYPE=0x1L",\
+ MANIFEST:=$(JDK_TOPDIR)/src/windows/resource/unpack200_proto.exe.manifest))
+
+ifneq ($(USE_EXTERNAL_LIBZ), true)
+
+$(BUILD_UNPACKEXE) : $(UNPACKEXE_ZIPOBJS)
+
+endif
+
+BUILD_LAUNCHERS += $(BUILD_UNPACKEXE)
+
+##########################################################################################
+
+
+BUILD_JEXEC :=
+BUILD_JEXEC_SRC :=
+BUILD_JEXEC_INC :=
+BUILD_JEXEC_DST_DIR := $(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)
+
+#
+# UNHANDLED:
+# - COMPILE_APPROACH = normal
+#
+
+#
+# jdk/make/java/Makefile
+#
+ifeq ($(OPENJDK_TARGET_OS), solaris)
+ ifeq ($(OPENJDK_TARGET_CPU_BITS), 32)
+ BUILD_JEXEC := 1
+ endif
+endif
+
+ifeq ($(OPENJDK_TARGET_OS), linux)
+ BUILD_JEXEC := 1
+endif # OPENJDK_TARGET_OS
+
+#
+# jdk/make/java/jexec/Makefile
+#
+ifeq ($(BUILD_JEXEC), 1)
+
+ ifeq ($(OPENJDK_TARGET_OS),windows)
+ else ifeq ($(OPENJDK_TARGET_OS),macosx)
+ BUILD_JEXEC_SRC := $(JDK_TOPDIR)/src/macosx/bin
+ else
+ BUILD_JEXEC_SRC := $(JDK_TOPDIR)/src/solaris/bin
+ endif
+
+ ifeq ($(OPENJDK_TARGET_OS), linux)
+ BUILD_JEXEC_DST_DIR := $(JDK_OUTPUTDIR)/lib
+ BUILD_JEXEC_INC += -I$(JDK_TOPDIR)/src/share/bin
+ endif
+endif
+
+#
+# Note that the two Makefile's seems to contradict each other,
+# and that src/macosx/bin/jexec.c seems unused
+#
+ifneq ($(BUILD_JEXEC_SRC),)
+ $(eval $(call SetupNativeCompilation,BUILD_JEXEC,\
+ SRC:=$(BUILD_JEXEC_SRC),\
+ INCLUDE_FILES:=jexec.c,\
+ LANG:=C,\
+ OPTIMIZATION := LOW, \
+ CFLAGS:=$(CFLAGS_JDKEXE)\
+ $(BUILD_JEXEC_INC), \
+ CFLAGS_linux:=-fPIC,\
+ CFLAGS_solaris:=-KPIC,\
+ LDFLAGS:=$(LDFLAGS_JDKEXE) \
+ $(call SET_SHARED_LIBRARY_NAME,$(LIBRARY_PREFIX)$(SHARED_LIBRARY_SUFFIX)), \
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/jexec_obj,\
+ OUTPUT_DIR:=$(BUILD_JEXEC_DST_DIR),\
+ PROGRAM:=jexec))
+
+ BUILD_LAUNCHERS += $(BUILD_JEXEC)
+endif
+
+##########################################################################################
+
+#
+# The java-rmi.cgi script in bin/ only gets delivered in certain situations
+#
+JAVA_RMI_CGI:=$(JDK_OUTPUTDIR)/bin$(OUTPUT_SUBDIR)/java-rmi.cgi
+ifeq ($(OPENJDK_TARGET_OS), linux)
+ BUILD_LAUNCHERS += $(JAVA_RMI_CGI)
+endif
+ifeq ($(OPENJDK_TARGET_OS), solaris)
+ ifeq ($(OPENJDK_TARGET_CPU_BITS), 32)
+ BUILD_LAUNCHERS += $(JAVA_RMI_CGI)
+ endif
+endif
+
+# TODO:
+# On windows java-rmi.cgi shouldn't be bundled since Java 1.2, but has been built all
+# this time anyway. Since jdk6, it has been built from the wrong source and resulted
+# in a copy of the standard java launcher named "java-rmi.exe" ending up in the final
+# images bin dir. This weird behavior is mimicked here in the converted makefiles for
+# now. Should probably just be deleted.
+# http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6512052
+ifeq ($(OPENJDK_TARGET_OS),windows)
+ $(eval $(call SetupLauncher,java-rmi,\
+ -DEXPAND_CLASSPATH_WILDCARDS,\
+ $(call SET_SHARED_LIBRARY_MAPFILE,$(JDK_TOPDIR)/makefiles/java/main/java/mapfile-$(OPENJDK_TARGET_CPU))))
+else
+ $(JAVA_RMI_CGI): $(JDK_TOPDIR)/src/solaris/bin/java-rmi.cgi.sh
+ $(MKDIR) -p $(@D)
+ $(CP) $< $@
+ $(CHMOD) a+x $@
+endif
+
+##########################################################################################
+
+$(BUILD_LAUNCHERS) : $(JDK_TOPDIR)/makefiles/CompileLaunchers.gmk
+
+all: $(BUILD_LAUNCHERS)
+
+.PHONY: all
--- a/jdk/makefiles/CompileNativeLibraries.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CompileNativeLibraries.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -44,13 +44,7 @@
# Put the libraries here. Different locations for different target apis.
ifeq ($(OPENJDK_TARGET_OS_API),posix)
- ifneq ($(OPENJDK_TARGET_OS),macosx)
- INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib/$(LIBARCH)
- LIBARCHDIR=$(LIBARCH)/
- else
- INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib
- LIBARCHDIR=/
- endif
+ INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)
else
INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/bin
endif
@@ -63,6 +57,18 @@
WIN_JAVA_LIB := $(JDK_OUTPUTDIR)/objs/libjava/java.lib
WIN_AWT_LIB := $(JDK_OUTPUTDIR)/objs/libawt/awt.lib
+# Use this variable to set DEBUG_SYMBOLS true on windows for all libraries, but
+# not on other platforms.
+ifeq ($(OPENJDK_TARGET_OS), windows)
+ WINDOWS_ONLY := true
+endif
+
+#
+# TODO replace with X_FLAGS / X_LIBS
+# and add them to configure
+#
+OPENWIN_LIB:=$(OPENWIN_HOME)/lib
+
##########################################################################################
BUILD_LIBFDLIBM_OPTIMIZATION:=HIGH
@@ -80,7 +86,7 @@
OPTIMIZATION:=$(BUILD_LIBFDLIBM_OPTIMIZATION), \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/java/lang/fdlibm/include,\
- CFLAGS_winapi_debug:=-DLOGGING,\
+ CFLAGS_windows_debug:=-DLOGGING,\
ARFLAGS:=$(ARFLAGS),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libfdlibm))
@@ -98,7 +104,7 @@
LANG:=C,\
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/java/lang/fdlibm/include,\
- LDFLAGS:=-nostdlib -r,\
+ LDFLAGS:=-nostdlib -r -arch i386 -arch x86_64,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libfdlibm))
$(JDK_OUTPUTDIR)/objs/$(LIBRARY_PREFIX)fdlibm$(STATIC_LIBRARY_SUFFIX) : $(BUILD_LIBFDLIBM)
@@ -112,11 +118,18 @@
BUILD_LIBVERIFY_SRC:=check_code.c check_format.c
ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifneq ($(ARCH), amd64)
- BUILD_LIBVERIFY_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libverify/reorder-$(ARCH)
+ ifneq ($(OPENJDK_TARGET_CPU), x86_64)
+ BUILD_LIBVERIFY_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libverify/reorder-$(OPENJDK_TARGET_CPU)
endif
endif
+LIBVERIFY_OPTIMIZATION:=HIGH
+ifneq ($(findstring $(OPENJDK_TARGET_OS),solaris linux),)
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
+ LIBVERIFY_OPTIMIZATION:=LOW
+ endif
+endif
+
$(eval $(call SetupNativeCompilation,BUILD_LIBVERIFY,\
LIBRARY:=verify, \
@@ -124,13 +137,18 @@
SRC:=$(JDK_TOPDIR)/src/share/native/common,\
INCLUDE_FILES:=$(BUILD_LIBVERIFY_SRC),\
LANG:=C,\
- OPTIMIZATION:=HIGH, \
+ OPTIMIZATION:=$(LIBVERIFY_OPTIMIZATION), \
CFLAGS:=$(CFLAGS_JDKLIB),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libverify/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN), \
LDFLAGS_SUFFIX_posix:=-ljvm -lc,\
LDFLAGS_SUFFIX_windows:=jvm.lib,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS) \
+ /D "JDK_FNAME=verify.dll" \
+ /D "JDK_INTERNAL_NAME=verify" \
+ /D "JDK_FTYPE=0x2L",\
REORDER:=$(BUILD_LIBVERIFY_REORDER),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libverify,\
DEBUG_SYMBOLS:=true))
@@ -139,40 +157,32 @@
##########################################################################################
-LIBJAVA_SRC_DIRS:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/lang \
+LIBJAVA_SRC_DIRS:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/lang \
$(JDK_TOPDIR)/src/share/native/java/lang \
$(JDK_TOPDIR)/src/share/native/java/lang/ref \
$(JDK_TOPDIR)/src/share/native/java/lang/reflect \
$(JDK_TOPDIR)/src/share/native/java/io \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/io \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/io \
$(JDK_TOPDIR)/src/share/native/java/nio \
$(JDK_TOPDIR)/src/share/native/java/security \
$(JDK_TOPDIR)/src/share/native/common \
$(JDK_TOPDIR)/src/share/native/sun/misc \
$(JDK_TOPDIR)/src/share/native/sun/reflect \
- $(JDK_TOPDIR)/src/share/native/java/sql \
$(JDK_TOPDIR)/src/share/native/java/util \
$(JDK_TOPDIR)/src/share/native/java/util/concurrent/atomic \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/common \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/util \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/provider \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/io
-
-#
-# TODO
-#
-ARCHPROPNAME:=$(LIBARCH)
-ifeq ($(OPENJDK_TARGET_OS)-$(ARCH), solaris-i586)
- ARCHPROPNAME:=x86
-else ifeq ($(OPENJDK_TARGET_OS)-$(ARCH_DATA_MODEL), windows-32)
- ARCHPROPNAME:=x86
-else ifeq ($(OPENJDK_TARGET_OS), macosx)
- ARCHPROPNAME:=$(ARCH)
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/common \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/util \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/provider \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/io
+ifneq ($(OPENJDK_TARGET_OS),macosx)
+ LIBJAVA_SRC_DIRS+=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/util/locale/provider
+else
+ LIBJAVA_SRC_DIRS+=$(JDK_TOPDIR)/src/macosx/native/sun/util/locale/provider
endif
LIBJAVA_CFLAGS:=$(foreach dir,$(LIBJAVA_SRC_DIRS),-I$(dir)) \
-I$(JDK_TOPDIR)/src/share/native/java/lang/fdlibm/include \
- -DARCHPROPNAME='"$(ARCHPROPNAME)"'
+ -DARCHPROPNAME='"$(OPENJDK_TARGET_CPU_OSARCH)"'
LIBJAVA_CFLAGS += -DJDK_MAJOR_VERSION='"$(JDK_MAJOR_VERSION)"' \
-DJDK_MINOR_VERSION='"$(JDK_MINOR_VERSION)"' \
@@ -208,8 +218,8 @@
endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifneq ($(ARCH), amd64)
- LIBJAVA_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libjava/reorder-$(ARCH)
+ ifneq ($(OPENJDK_TARGET_CPU), x86_64)
+ LIBJAVA_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libjava/reorder-$(OPENJDK_TARGET_CPU)
endif
endif
@@ -233,11 +243,17 @@
LDFLAGS_SUFFIX_posix:=-ljvm -lverify, \
LDFLAGS_SUFFIX_solaris:=-lnsl -lsocket -lscf $(LIBDL) $(BUILD_LIBFDLIBM) -lc,\
LDFLAGS_SUFFIX_linux:=$(LIBDL) $(BUILD_LIBFDLIBM),\
- LDFLAGS_SUFFIX_macosx:=$(BUILD_LIBFDLIBM) \
+ LDFLAGS_SUFFIX_macosx:=-L$(JDK_OUTPUTDIR)/objs/ -lfdlibm \
-framework CoreFoundation \
-framework Security -framework SystemConfiguration, \
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=java.dll" \
+ /D "JDK_INTERNAL_NAME=java" \
+ /D "JDK_FTYPE=0x2L",\
REORDER:=$(LIBJAVA_REORDER), \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjava))
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjava,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBJAVA)
@@ -252,20 +268,14 @@
BUILD_LIBMLIB_SRC:=$(JDK_TOPDIR)/src/share/native/sun/awt/medialib
BUILD_LIBMLIB_CFLAGS:=-D__USE_J2D_NAMES -D__MEDIALIB_OLD_NAMES \
-I$(BUILD_LIBMLIB_SRC) \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt/medialib
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt/medialib
BUILD_LIBMLIB_LDLIBS:=
BUILD_LIBMLIB_IMAGE_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libmlib_image/mapfile-vers
-ifneq ($(OPENJDK_TARGET_OS), sparc)
-#
-# Yes, this will always be true (until someone makes an OS called sparc)
-# but this is how it was writtin in old system...keep it like this for now
-#
- BUILD_LIBMLIB_CFLAGS += -DMLIB_NO_LIBSUNMATH
-endif
-
-ifeq ($(ARCH_DATA_MODEL), 64)
+BUILD_LIBMLIB_CFLAGS += -DMLIB_NO_LIBSUNMATH
+
+ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
BUILD_LIBMLIB_CFLAGS += -DMLIB_OS64BIT
endif
@@ -284,11 +294,16 @@
$(BUILD_LIBMLIB_CFLAGS),\
MAPFILE:=$(BUILD_LIBMLIB_IMAGE_MAPFILE), \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
- $(BUILD_LIBMLIB_LDLIBS) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- LDFLAGS_SUFFIX_posix:=-lm,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libmlib_image))
+ LDFLAGS_SUFFIX:=$(BUILD_LIBMLIB_LDLIBS) \
+ $(LDFLAGS_JDKLIB_SUFFIX),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=mlib_image.dll" \
+ /D "JDK_INTERNAL_NAME=mlib_image" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libmlib_image,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBMLIB_IMAGE) : $(BUILD_LIBJAVA)
@@ -296,15 +311,7 @@
##########################################################################################
-ifeq ($(OPENJDK_TARGET_OS),solaris)
-ifeq ($(ARCH),sparc)
- BUILD_LIBMLIB_IMAGE_V:=1
-else ifeq ($(ARCH), sparcv9)
- BUILD_LIBMLIB_IMAGE_V:=1
-endif
-endif
-
-ifeq ($(BUILD_LIBMLIB_IMAGE_V), 1)
+ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH),solaris-sparc)
BUILD_LIBMLIB_IMAGE_V_FILES:=\
mlib_v_ImageLookUp.c \
@@ -411,7 +418,7 @@
INCLUDE_FILES:=$(BUILD_LIBMLIB_IMAGE_V_FILES),\
OPTIMIZATION:=HIGHEST, \
CFLAGS:=-xarch=sparcvis \
- $(JDK_TOPDIR)/src/solaris/native/sun/awt/medialib/vis_$(ARCH_DATA_MODEL).il\
+ $(JDK_TOPDIR)/src/solaris/native/sun/awt/medialib/vis_$(OPENJDK_TARGET_CPU_BITS).il\
$(BUILD_LIBMLIB_V_CFLAGS) \
$(CFLAGS_JDKLIB), \
MAPFILE:=$(BUILD_LIBMLIB_IMAGE_MAPFILE), \
@@ -428,7 +435,7 @@
LIBAWT_DIRS:=\
$(JDK_TOPDIR)/src/share/native/sun/awt \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt \
$(JDK_TOPDIR)/src/share/native/sun/awt/image \
$(JDK_TOPDIR)/src/share/native/sun/awt/image/gif \
$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils \
@@ -437,17 +444,17 @@
$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
$(JDK_TOPDIR)/src/share/native/sun/awt/utility \
$(JDK_TOPDIR)/src/share/native/sun/java2d \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d \
$(JDK_TOPDIR)/src/share/native/sun/java2d/loops \
$(JDK_TOPDIR)/src/share/native/sun/java2d/pipe \
$(JDK_TOPDIR)/src/share/native/sun/awt/image \
$(JDK_TOPDIR)/src/share/native/sun/java2d/opengl \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/opengl \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/x11 \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/opengl \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/x11 \
$(JDK_TOPDIR)/src/share/native/sun/font \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/windows \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/windows \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/d3d
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/windows \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/windows \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/d3d
LIBAWT_CFLAGS:=-D__MEDIALIB_OLD_NAMES -D__USE_J2D_NAMES \
@@ -524,11 +531,12 @@
debug_trace.c \
debug_util.c
-ifneq (,$(filter $(OPENJDK_TARGET_OS), solaris linux macosx))
+ifneq (,$(filter $(OPENJDK_TARGET_OS), solaris linux))
LIBAWT_FILES += awt_LoadLibrary.c initIDs.c img_colors.c
endif
ifeq ($(OPENJDK_TARGET_OS),macosx)
+ LIBAWT_FILES += awt_LoadLibrary.c img_colors.c
LIBAWT_DIRS += $(JDK_TOPDIR)/src/macosx/native/com/apple/resources
LIBAWT_FILES += awt_LoadLibrary.c MacOSXResourceBundle.m
LIBAWT_CFLAGS += -F/System/Library/Frameworks/JavaVM.framework/Frameworks
@@ -539,7 +547,7 @@
ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH), solaris-sparc)
LIBAWT_CFLAGS += -DMLIB_ADD_SUFF
LIBAWT_CFLAGS += -xarch=sparcvis
- LIBAWT_CFLAGS += $(JDK_TOPDIR)/src/solaris/native/sun/awt/medialib/vis_$(ARCH_DATA_MODEL).il
+ LIBAWT_CFLAGS += $(JDK_TOPDIR)/src/solaris/native/sun/awt/medialib/vis_$(OPENJDK_TARGET_CPU_BITS).il
LIBAWT_CFLAGS += \
-I$(JDK_TOPDIR)/src/solaris/native/sun/awt/medialib \
-I$(JDK_TOPDIR)/src/solaris/native/sun/java2d/medialib \
@@ -591,7 +599,7 @@
vis_XorBlit.c \
mlib_v_ImageCopy_blk.s
- ifeq ($(OPENJDK_TARGET_CPU_BITS),64)
+ ifeq ($(OPENJDK_TARGET_CPU),sparcv9)
LIBAWT_ASFLAGS=-P -xarch=v9a
else
LIBAWT_ASFLAGS=-P -xarch=v8plusa
@@ -644,8 +652,8 @@
MouseInfo.cpp \
rect.c
LIBAWT_LANG:=C++
- LIBAWT_CFLAGS += $(GX_OPTION) -DUNICODE -D_UNICODE
- ifeq ($(ARCH_DATA_MODEL), 64)
+ LIBAWT_CFLAGS += -EHsc -DUNICODE -D_UNICODE
+ ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
LIBAWT_CFLAGS += -DMLIB_OS64BIT
endif
@@ -686,22 +694,25 @@
/DELAYLOAD:winspool.drv /DELAYLOAD:imm32.dll \
/DELAYLOAD:ole32.dll /DELAYLOAD:comdlg32.dll \
/DELAYLOAD:comctl32.dll /DELAYLOAD:shlwapi.dll,\
- LDFLAGS_macosx:=-lmlib_image \
- -framework Cocoa \
- -framework OpenGL \
- -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
- -framework JavaNativeFoundation \
- -framework JavaRuntimeSupport \
- -framework ApplicationServices \
- -framework AudioToolbox,\
- LDFLAGS_solaris:=-R/usr/dt/lib$(ISA_DIR) -R$(OPENWIN_LIB)$(ISA_DIR),\
- LDFLAGS_SUFFIX_posix:=-ljvm $(LIBM) -ljava $(LIBDL),\
+ LDFLAGS_solaris:=-R/usr/dt/lib$(OPENJDK_TARGET_CPU_ISADIR) -R$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR),\
+ LDFLAGS_SUFFIX_linux:=-ljvm $(LIBM) $(LIBDL) -ljava,\
+ LDFLAGS_SUFFIX_solaris:=-ljvm $(LIBM) $(LIBDL) -ljava,\
+ LDFLAGS_SUFFIX_macosx:=-lmlib_image -ljvm $(LIBM) \
+ -framework Cocoa \
+ -framework OpenGL \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -framework JavaNativeFoundation \
+ -framework JavaRuntimeSupport \
+ -framework ApplicationServices \
+ -framework AudioToolbox \
+ -ljava,\
VERSIONINFO_RESOURCE:=$(LIBAWT_VERSIONINFO_RESOURCE),\
RC_FLAGS:=$(RC_FLAGS) $(LIBAWT_RC_FLAGS) \
/D "JDK_FNAME=awt.dll" \
/D "JDK_INTERNAL_NAME=awt" \
/D "JDK_FTYPE=0x2L",\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libawt))
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libawt,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBAWT) : $(BUILD_LIBJAVA)
@@ -728,25 +739,25 @@
$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
$(JDK_TOPDIR)/src/share/native/sun/awt/utility \
$(JDK_TOPDIR)/src/share/native/sun/font \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/font \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/font \
$(JDK_TOPDIR)/src/share/native/sun/java2d/opengl \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/opengl \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/x11 \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/xawt \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/opengl \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/x11 \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/xawt \
LIBAWT_XAWT_CFLAGS:=-DXAWT -DXAWT_HACK \
-DX11_PATH=\"$(X11_PATH)\" -DPACKAGE_PATH=\"$(PACKAGE_PATH)\" \
$(CUPS_CFLAGS) \
$(foreach dir,$(LIBAWT_XAWT_DIRS),-I$(dir)) \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/loops \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/pipe \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/jdga
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/jdga
ifeq ($(OPENJDK_TARGET_OS),solaris)
LIBAWT_XAWT_CFLAGS += -DFUNCPROTO=15
@@ -816,13 +827,15 @@
LIBAWT_XAWT_LDFLAGS_SUFFIX:=$(LIBM) -lawt -lXext -lX11 -lXrender $(LIBDL) -lXtst -lXi -ljava -ljvm -lc
ifeq ($(OPENJDK_TARGET_OS), linux)
- LIBAWT_XAWT_LDFLAGS_SUFFIX += -lpthread
+ # To match old build, add this to LDFLAGS instead of suffix.
+ LIBAWT_XAWT_LDFLAGS += -lpthread
endif
ifeq ($(OPENJDK_TARGET_OS), macosx)
LIBAWT_XAWT_LDFLAGS_SUFFIX += -lpthread
endif
+# On macosx, the shared library origin is set twice for this lib.
$(eval $(call SetupNativeCompilation,BUILD_LIBAWT_XAWT,\
LIBRARY:=awt_xawt,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
@@ -834,12 +847,26 @@
$(X_CFLAGS),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libawt_xawt/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
- $(call SET_SHARED_LIBRARY_ORIGIN) \
- $(X_LIBS),\
- LDFLAGS_solaris:=-L$(OPENWIN_HOME)/sfw/lib$(ISA_DIR) -L$(OPENWIN_HOME)/lib$(ISA_DIR) \
- -R$(OPENWIN_HOME)/sfw/lib$(ISA_DIR) -R$(OPENWIN_HOME)/lib$(ISA_DIR) \
- -R/usr/dt/lib$(ISA_DIR),\
+ $(X_LIBS) $(LIBAWT_XAWT_LDFLAGS),\
+ LDFLAGS_linux:=$(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(call SET_SHARED_LIBRARY_ORIGIN,/..),\
+ LDFLAGS_solaris:=-L$(OPENWIN_HOME)/sfw/lib$(OPENJDK_TARGET_CPU_ISADIR) \
+ -L$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR) \
+ -R$(OPENWIN_HOME)/sfw/lib$(OPENJDK_TARGET_CPU_ISADIR) \
+ -R$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR) \
+ -R/usr/dt/lib$(OPENJDK_TARGET_CPU_ISADIR) \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(call SET_SHARED_LIBRARY_ORIGIN,/..),\
+ LDFLAGS_macosx:=$(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(call SET_SHARED_LIBRARY_ORIGIN). \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(call SET_SHARED_LIBRARY_ORIGIN).,\
LDFLAGS_SUFFIX:=$(LIBAWT_XAWT_LDFLAGS_SUFFIX),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=xawt.dll" \
+ /D "JDK_INTERNAL_NAME=xawt" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libawt_xawt))
$(BUILD_LIBAWT_XAWT) : $(BUILD_LIBJAVA)
@@ -885,8 +912,8 @@
BUILD_LIBZIP_REORDER:=
ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifneq ($(ARCH), amd64)
- BUILD_LIBZIP_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libzip/reorder-$(ARCH)
+ ifneq ($(OPENJDK_TARGET_CPU), x86_64)
+ BUILD_LIBZIP_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libzip/reorder-$(OPENJDK_TARGET_CPU)
endif
endif
@@ -905,17 +932,26 @@
CFLAGS:=$(CFLAGS_JDKLIB) \
$(LIBZ_INCLUDE) \
-I$(JDK_TOPDIR)/src/share/native/java/io \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/io,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/io,\
CFLAGS_posix:=$(BUILD_LIBZIP_MMAP) -UDEBUG,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libzip/mapfile-vers, \
REORDER:=$(BUILD_LIBZIP_REORDER), \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
$(EXPORT_ZIP_FUNCS), \
- LDFLAGS_winapi:=-export:ZIP_Open -export:ZIP_Close -export:ZIP_FindEntry \
+ LDFLAGS_windows:=-export:ZIP_Open -export:ZIP_Close -export:ZIP_FindEntry \
-export:ZIP_ReadEntry -export:ZIP_GetNextEntry jvm.lib \
$(WIN_JAVA_LIB),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBZ),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libzip))
+ LDFLAGS_SUFFIX_linux:=-ljvm -ljava $(LIBZ),\
+ LDFLAGS_SUFFIX_solaris:=-ljvm -ljava $(LIBZ),\
+ LDFLAGS_SUFFIX_macosx:=$(LIBZ) -ljava -ljvm,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=zip.dll" \
+ /D "JDK_INTERNAL_NAME=zip" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libzip,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBZIP) : $(BUILD_LIBJAVA)
@@ -934,24 +970,24 @@
-DNO_ZLIB -DUNPACK_JNI -DFULL,\
CFLAGS_release:=-DPRODUCT,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libunpack/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB)\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_winapi:=-map:$(JDK_OUTPUTDIR)/objs/unpack.map /debug \
+ LDFLAGS_windows:=-map:$(JDK_OUTPUTDIR)/objs/unpack.map /debug \
jvm.lib $(WIN_JAVA_LIB),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- LDFLAGS_SUFFIX_posix:=$(LIBCXX),\
+ LDFLAGS_SUFFIX_posix:=-ljvm $(LIBCXX) -ljava -lc,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libunpack,\
VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
RC_FLAGS:=$(RC_FLAGS)\
/D "JDK_FNAME=unpack.dll" \
/D "JDK_INTERNAL_NAME=unpack" \
- /D "JDK_FTYPE=0x2L"))
+ /D "JDK_FTYPE=0x2L",\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBUNPACK) : $(BUILD_LIBJAVA)
BUILD_LIBRARIES += $(BUILD_LIBUNPACK)
-ifeq ($(OPENJDK_TARGET_OS_API),winapi)
+ifeq ($(OPENJDK_TARGET_OS),windows)
$(INSTALL_LIBRARIES_HERE)/$(LIBRARY_PREFIX)unpack.map: $(BUILD_LIBUNPACK)
$(ECHO) Copying $(@F)
$(CP) $(patsubst %$(SHARED_LIBRARY_SUFFIX),%.map,$<) $@
@@ -977,16 +1013,21 @@
$(eval $(call SetupNativeCompilation,BUILD_LIBATTACH,\
LIBRARY:=attach, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/tools/attach,\
+ SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/tools/attach,\
EXCLUDE_FILES:=$(LIBATTACH_EXCLUDE_FILES),\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libattach/mapfile-$(OPENJDK_TARGET_OS), \
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS) \
+ /D "JDK_FNAME=attach.dll" \
+ /D "JDK_INTERNAL_NAME=attach" \
+ /D "JDK_FTYPE=0x2L",\
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_solaris:=-ldoor,\
- LDFLAGS_winapi:=psapi.lib advapi32.lib $(WIN_JAVA_LIB) jvm.lib,\
+ LDFLAGS_windows:=psapi.lib advapi32.lib $(WIN_JAVA_LIB) jvm.lib,\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libattach,\
DEBUG_SYMBOLS:=true))
@@ -1001,21 +1042,26 @@
LIBRARY:=dt_socket,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/transport/socket \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/transport/socket,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/transport/socket,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) -DUSE_MMAP \
-I$(INCLUDEDIR) -I$(JDK_OUTPUTDIR)/include/$(OPENJDK_TARGET_OS) \
-I$(JDK_TOPDIR)/src/share/transport/socket \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/transport/socket \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/transport/socket \
-I$(JDK_TOPDIR)/src/share/back/export \
-I$(JDK_TOPDIR)/src/share/back,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libdt_socket/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB), \
- LDFLAGS_SUFFIX_linux:=$(LDFLAGS_JDKLIB_SUFFIX) -lpthread,\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ $(call SET_SHARED_LIBRARY_ORIGIN), \
+ LDFLAGS_SUFFIX_linux:=-lpthread,\
LDFLAGS_SUFFIX_solaris:=-lnsl -lsocket,\
- LDFLAGS_SUFFIX_winapi:=$(LDFLAGS_JDKLIB_SUFFIX) -export:jdwpTransport_OnLoad ws2_32.lib,\
- LDFLAGS_SUFFIX:=,\
+ LDFLAGS_SUFFIX_windows:=$(LDFLAGS_JDKLIB_SUFFIX) -export:jdwpTransport_OnLoad ws2_32.lib,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=dt_socket.dll" \
+ /D "JDK_INTERNAL_NAME=dt_socket" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libdt_socket,\
DEBUG_SYMBOLS:=true))
@@ -1025,55 +1071,66 @@
##########################################################################################
-ifeq ($(OPENJDK_TARGET_OS_API),winapi)
+ifeq ($(OPENJDK_TARGET_OS),windows)
$(eval $(call SetupNativeCompilation,BUILD_LIBDT_SHMEM,\
LIBRARY:=dt_shmem,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/com/sun/tools/jdi \
$(JDK_TOPDIR)/src/share/transport/shmem \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/transport/shmem,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/transport/shmem,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) -DUSE_MMAP\
-I$(INCLUDEDIR) -I$(JDK_OUTPUTDIR)/include/$(OPENJDK_TARGET_OS) \
-I$(JDK_TOPDIR)/src/share/transport/shmem \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/transport/shmem \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/transport/shmem \
-I$(JDK_TOPDIR)/src/share/back/export, \
LDFLAGS:=$(LDFLAGS_JDKLIB),\
- LDFLAGS_winapi:=-export:jdwpTransport_OnLoad,\
+ LDFLAGS_windows:=-export:jdwpTransport_OnLoad,\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libdt_shmem))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=dt_shmem.dll" \
+ /D "JDK_INTERNAL_NAME=dt_shmem" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libdt_shmem,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBDT_SHMEM)
endif # OPENJDK_TARGET_OS
##########################################################################################
-# JDWP_LOGGING causes log messages to be compiled into the library. These reference the
-# __FILE__ macro which here expands to the absolute path of the file while the old build
-# system used a relative path. This causes the binaries to differ in size.
+# JDWP_LOGGING causes log messages to be compiled into the library.
$(eval $(call SetupNativeCompilation,BUILD_LIBJDWP,\
LIBRARY:=jdwp, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/share/back $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/back,\
+ SRC:=$(JDK_TOPDIR)/src/share/back $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/back,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) -DJDWP_LOGGING\
-I$(JDK_TOPDIR)/src/share/transport/export \
-I$(JDK_TOPDIR)/src/share/back/export \
-I$(JDK_TOPDIR)/src/share/npt \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/npt \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/npt \
-I$(JDK_TOPDIR)/src/share/back \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/back \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/back \
-I$(JDK_OUTPUTDIR)/gensrc_jdwp_headers,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjdwp/mapfile-vers, \
- LDFLAGS:=$(filter-out -ljava,$(LDFLAGS_JDKLIB)), \
- LDFLAGS_SUFFIX_linux:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBDL),\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ $(call SET_SHARED_LIBRARY_ORIGIN),\
+ LDFLAGS_SUFFIX_linux:=$(LIBDL),\
LDFLAGS_SUFFIX_solaris:=$(LIBDL),\
LDFLAGS_SUFFIX_windows:=$(LDFLAGS_JDKLIB_SUFFIX),\
LDFLAGS_SUFFIX:=,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjdwp))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jdwp.dll" \
+ /D "JDK_INTERNAL_NAME=jdwp" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjdwp,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJDWP) : $(BUILD_LIBJAVA)
@@ -1097,19 +1154,24 @@
$(eval $(call SetupNativeCompilation,BUILD_LIBJAAS,\
LIBRARY:=$(LIBJAAS_NAME),\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/com/sun/security/auth/module,\
+ SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/com/sun/security/auth/module,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB),\
MAPFILE:=$(LIBJAAS_MAPFILE),\
LDFLAGS:=$(filter-out -ljava,$(LDFLAGS_JDKLIB)) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_winapi:=netapi32.lib user32.lib mpr.lib advapi32.lib,\
- LDFLAGS_SUFFIX_linux:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ LDFLAGS_windows:=netapi32.lib user32.lib mpr.lib advapi32.lib,\
LDFLAGS_SUFFIX_windows:=$(LDFLAGS_JDKLIB_SUFFIX),\
LDFLAGS_SUFFIX:=,\
EXCLUDE_FILES:=$(LIBJAAS_EXCLUDE_FILES),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjaas))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS) \
+ /D "JDK_FNAME=$(LIBJAAS_NAME).dll" \
+ /D "JDK_INTERNAL_NAME=$(LIBJAAS_NAME)" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjaas,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJAAS) : $(BUILD_LIBJAVA)
@@ -1121,7 +1183,7 @@
LIBRARY:=jsdt,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/tracing/dtrace\
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/tracing/dtrace,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/tracing/dtrace,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB)\
@@ -1129,12 +1191,17 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjsdt/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX_linux:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBDL),\
- LDFLAGS_SUFFIX_winapi:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBDL),\
+ LDFLAGS_SUFFIX_linux:=$(LIBDL),\
+ LDFLAGS_SUFFIX_windows:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBDL),\
LDFLAGS_SUFFIX_macosx:= $(LIBDL),\
LDFLAGS_SUFFIX:=,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jsdt.dll" \
+ /D "JDK_INTERNAL_NAME=jsdt" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsdt, \
- DEBUG_SYMBOLS:= yes))
+ DEBUG_SYMBOLS:=true))
$(BUILD_LIBJSDT) : $(BUILD_LIBJAVA)
@@ -1163,14 +1230,20 @@
-I$(JDK_TOPDIR)/src/share/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug,\
CFLAGS_solaris:=-xc99=no_lib,\
- CFLAGS_winapi:=-DCMS_IS_WINDOWS_,\
+ CFLAGS_windows:=-DCMS_IS_WINDOWS_,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/liblcms/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB), \
- LDFLAGS_solaris:=/usr/lib$(ISA_DIR)/libm.so.2,\
- LDFLAGS_winapi:=$(WIN_AWT_LIB) $(WIN_JAVA_LIB),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- LDFLAGS_SUFFIX_posix:=-lawt,\
- LDFLAGS_SUFFIX_linux:=-lm,\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ $(call SET_SHARED_LIBRARY_ORIGIN), \
+ LDFLAGS_solaris:=/usr/lib$(OPENJDK_TARGET_CPU_ISADIR)/libm.so.2,\
+ LDFLAGS_windows:=$(WIN_AWT_LIB) $(WIN_JAVA_LIB),\
+ LDFLAGS_SUFFIX_solaris:=-lawt -ljava -ljvm,\
+ LDFLAGS_SUFFIX_macosx:=$(LIBM) -lawt -ljava -ljvm,\
+ LDFLAGS_SUFFIX_linux:=-lm -lawt -ljava -ljvm,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=lcms.dll" \
+ /D "JDK_INTERNAL_NAME=lcms" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/liblcms))
BUILD_LIBRARIES += $(BUILD_LIBLCMS)
@@ -1190,8 +1263,8 @@
BUILD_LIBJPEG_REORDER:=
ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifneq ($(ARCH), amd64)
- BUILD_LIBJPEG_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libjpeg/reorder-$(ARCH)
+ ifneq ($(OPENJDK_TARGET_CPU), x86_64)
+ BUILD_LIBJPEG_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libjpeg/reorder-$(OPENJDK_TARGET_CPU)
endif
endif
@@ -1223,11 +1296,16 @@
MAPFILE:=$(BUILD_LIBJPEG_MAPFILE), \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_linux:=$(LIBDL),\
- LDFLAGS_winapi:=$(WIN_JAVA_LIB) jvm.lib,\
+ LDFLAGS_windows:=$(WIN_JAVA_LIB) jvm.lib,\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jpeg.dll" \
+ /D "JDK_INTERNAL_NAME=jpeg" \
+ /D "JDK_FTYPE=0x2L",\
REORDER:=$(BUILD_LIBJPEG_REORDER),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjpeg))
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjpeg,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJPEG) : $(BUILD_LIBJAVA)
@@ -1263,11 +1341,11 @@
-I$(JDK_TOPDIR)/src/share/native/sun/font \
-I$(JDK_TOPDIR)/src/share/native/sun/font/layout \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/loops \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/pipe \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d
# Turn off aliasing with GCC for ExtensionSubtables.cpp
@@ -1279,25 +1357,30 @@
LIBRARY:=fontmanager, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/font\
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/font,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/font,\
EXCLUDE_FILES:=$(LIBFONTMANAGER_EXCLUDE_FILES) \
AccelGlyphCache.c,\
LANG:=C++,\
CFLAGS:=$(CFLAGS_JDKLIB) $(BUILD_LIBFONTMANAGER_CFLAGS_COMMON),\
CXXFLAGS:=$(CXXFLAGS_JDKLIB) $(BUILD_LIBFONTMANAGER_CFLAGS_COMMON),\
OPTIMIZATION:=$(LIBFONTMANAGER_OPTIMIZATION), \
- CFLAGS_windows= -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/windows \
+ CFLAGS_windows= -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/windows \
-DCC_NOEX, \
MAPFILE:=$(BUILD_LIBFONTMANAGER_MAPFILE), \
- LDFLAGS:=$(subst -Xlinker -z -Xlinker defs,,$(LDFLAGS_JDKLIB)) \
+ LDFLAGS:=$(subst -Xlinker -z -Xlinker defs,,$(LDFLAGS_JDKLIB)) $(LDFLAGS_CXX_JDK) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_windows:=advapi32.lib user32.lib gdi32.lib $(WIN_AWT_LIB) $(WIN_JAVA_LIB),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) \
- $(BUILD_LIBFONTMANAGER_FONTLIB),\
- LDFLAGS_SUFFIX_linux:=-lawt $(LIBM) $(LIBCXX),\
- LDFLAGS_SUFFIX_solaris:=-lawt -lawt_xawt -lc $(LIBM) $(LIBCXX),\
- LDFLAGS_SUFFIX_macosx:=-lawt $(LIBM) $(LIBCXX) -undefined dynamic_lookup,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libfontmanager))
+ LDFLAGS_SUFFIX:=$(BUILD_LIBFONTMANAGER_FONTLIB),\
+ LDFLAGS_SUFFIX_linux:=-lawt $(LIBM) $(LIBCXX) -ljava -ljvm -lc,\
+ LDFLAGS_SUFFIX_solaris:=-lawt -lawt_xawt -lc $(LIBM) $(LIBCXX) -ljava -ljvm,\
+ LDFLAGS_SUFFIX_macosx:=-lawt $(LIBM) $(LIBCXX) -undefined dynamic_lookup -ljava -ljvm,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=fontmanager.dll" \
+ /D "JDK_INTERNAL_NAME=fontmanager" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libfontmanager,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBFONTMANAGER) : $(BUILD_LIBAWT)
@@ -1323,10 +1406,10 @@
-I$(JDK_TOPDIR)/src/closed/share/native/sun/font/t2k \
-I$(JDK_TOPDIR)/src/closed/share/native/sun/font \
-I$(JDK_TOPDIR)/src/share/share/native/sun/font \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/font \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/font \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/loops \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/pipe \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d
$(eval $(call SetupNativeCompilation,BUILD_LIBT2K,\
@@ -1343,15 +1426,18 @@
CFLAGS_windows=-DCC_NOEX, \
CXXFLAGS_windows=-DCC_NOEX, \
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libt2k/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_windows:=user32.lib $(JDK_OUTPUTDIR)/objs/libfontmanager/fontmanager.lib,\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- LDFLAGS_SUFFIX_macosx:=$(LIBCXX) $(LIBM) -lfontmanager,\
- LDFLAGS_SUFFIX_linux:=$(LIBCXX) $(LIBM) -lfontmanager,\
- LDFLAGS_SUFFIX_solaris:=$(LIBCXX) $(LIBM) -lfontmanager -lawt \
- -lawt_xawt,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libt2k))
+ LDFLAGS_SUFFIX_posix:=$(LIBM) $(LIBCXX) -lfontmanager -ljava -ljvm -lc,\
+ LDFLAGS_SUFFIX_solaris:=-lawt -lawt_xawt,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=t2k.dll" \
+ /D "JDK_INTERNAL_NAME=t2k" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libt2k,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
# t2k is linked against fontmanager
$(BUILD_LIBT2K) : $(BUILD_LIBFONTMANAGER)
@@ -1361,40 +1447,40 @@
##########################################################################################
-#
-# TODO replace with X_FLAGS / X_LIBS
-# and add them to configure
-#
-OPENWIN_LIB:=$(OPENWIN_HOME)/lib
-
ifeq ($(OPENJDK_TARGET_OS), windows)
- ifeq ($(ARCH_DATA_MODEL), 32)
+ ifeq ($(OPENJDK_TARGET_CPU), x86)
KERNEL32_LIB:=kernel32.lib
endif
$(eval $(call SetupNativeCompilation,BUILD_LIBJAWT,\
LIBRARY:=jawt, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/windows,\
+ SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/windows,\
INCLUDE_FILES:=jawt.cpp,\
LANG:=C++,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CXXFLAGS_JDKLIB) \
-EHsc -DUNICODE -D_UNICODE \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/windows \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/windows \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d/windows, \
- LDFLAGS:=$(LDFLAGS_JDKLIB) $(KERNEL32_LIB) \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d/windows, \
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(KERNEL32_LIB) $(LDFLAGS_CXX_JDK) \
advapi32.lib $(WIN_AWT_LIB),\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjawt))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jawt.dll" \
+ /D "JDK_INTERNAL_NAME=jawt" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjawt,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJAWT) : $(BUILD_LIBAWT)
$(JDK_OUTPUTDIR)/lib/$(LIBRARY_PREFIX)jawt$(STATIC_LIBRARY_SUFFIX): $(BUILD_LIBJAWT)
$(ECHO) Copying $(@F)
- $(CP) $< $@
+ $(CP) $(JDK_OUTPUTDIR)/objs/libjawt/$(LIBRARY_PREFIX)jawt$(STATIC_LIBRARY_SUFFIX) $@
BUILD_LIBRARIES += $(JDK_OUTPUTDIR)/lib/$(LIBRARY_PREFIX)jawt$(STATIC_LIBRARY_SUFFIX)
@@ -1421,7 +1507,7 @@
$(eval $(call SetupNativeCompilation,BUILD_LIBJAWT,\
LIBRARY:=jawt, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt \
+ SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt \
$(JDK_TOPDIR)/src/macosx/native/sun/awt,\
INCLUDE_FILES:=$(JAWT_FILES),\
LANG:=C,\
@@ -1432,10 +1518,11 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjawt/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_solaris:=-L$(OPENWIN_HOME)/sfw/lib$(ISA_DIR) -L$(OPENWIN_LIB)$(ISA_DIR),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) $(JAWT_LIBS),\
- LDFLAGS_SUFFIX_solaris:=-lXrender,\
- LDFLAGS_SUFFIX_macosx:=-framework Cocoa, \
+ LDFLAGS_solaris:=-L$(OPENWIN_HOME)/sfw/lib$(OPENJDK_TARGET_CPU_ISADIR) -L$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR),\
+ LDFLAGS_SUFFIX_linux:=$(JAWT_LIBS) $(LDFLAGS_JDKLIB_SUFFIX),\
+ LDFLAGS_SUFFIX_solaris:=$(JAWT_LIBS) $(LDFLAGS_JDKLIB_SUFFIX) -lXrender,\
+ LDFLAGS_SUFFIX_macosx:=-Xlinker -rpath -Xlinker @loader_path $(JAWT_LIBS) \
+ -framework Cocoa $(LDFLAGS_JDKLIB_SUFFIX),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjawt))
ifndef BUILD_HEADLESS_ONLY
@@ -1494,7 +1581,13 @@
LDFLAGS:=$(LIBJDBCODBC_LDFLAGS) \
$(call SET_SHARED_LIBRARY_ORIGIN) $(LIBJDBCODBC_LIBS),\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBJDBCODBC_SONAME),\
- OBJECT_DIR:=$(LIBJDBCODBC_DIR)))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=JdbcOdbc.dll" \
+ /D "JDK_INTERNAL_NAME=JdbcOdbc" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(LIBJDBCODBC_DIR),\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJDBCODBC) : $(BUILD_LIBJAVA)
@@ -1538,11 +1631,11 @@
##########################################################################################
-BUILD_LIBINSTRUMENT_SRC :=$(JDK_TOPDIR)/src/share/instrument \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/io \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/instrument
-
-BUILD_LIBINSTRUMENT_FILES :=\
+LIBINSTRUMENT_SRC :=$(JDK_TOPDIR)/src/share/instrument \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/io \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/instrument
+
+LIBINSTRUMENT_FILES :=\
EncodingSupport.c \
EncodingSupport_md.c \
FileSystemSupport_md.c \
@@ -1557,50 +1650,54 @@
Utilities.c \
canonicalize_md.c
-BUILD_LIBINSTRUMENT_DIR :=$(JDK_OUTPUTDIR)/objs/libinstrument
-BUILD_LIBINSTRUMENT_CFLAGS:=-I$(JDK_TOPDIR)/src/share/instrument \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/instrument \
- -I$(JDK_TOPDIR)/src/share/bin
-
-BUILD_LIBINSTRUMENT_LDFLAGS:=
-BUILD_LIBINSTRUMENT_LDFLAGS_SUFFIX:=
+LIBINSTRUMENT_DIR :=$(JDK_OUTPUTDIR)/objs/libinstrument
+LIBINSTRUMENT_CFLAGS:=$(CFLAGS_JDKLIB) \
+ -I$(JDK_TOPDIR)/src/share/instrument \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/instrument \
+ -I$(JDK_TOPDIR)/src/share/bin
+
+LIBINSTRUMENT_LDFLAGS:=
+LIBINSTRUMENT_LDFLAGS_SUFFIX:=
ifeq ($(OPENJDK_TARGET_OS), windows)
- BUILD_LIBINSTRUMENT_LDFLAGS += $(JDK_OUTPUTDIR)/objs/jli_static.lib $(WIN_JAVA_LIB) \
- -export:Agent_OnAttach
- # equivalent of strcasecmp is stricmp on Windows
- BUILD_LIBINSTRUMENT_CFLAGS += -Dstrcasecmp=stricmp
-else ifneq (,$(findstring $(OPENJDK_TARGET_OS), macosx))
- ifneq ($(ARCH), universal)
- BUILD_LIBINSTRUMENT_LDFLAGS += -Wl,-all_load
- endif
-
- BUILD_LIBINSTRUMENT_LDFLAGS += $(JDK_OUTPUTDIR)/objs/libjli_static.a
- BUILD_LIBINSTRUMENT_LDFLAGS += -liconv
- BUILD_LIBINSTRUMENT_LDFLAGS += -framework Cocoa -framework Security -framework ApplicationServices
- BUILD_LIBINSTRUMENT_LDFLAGS += $(LIBZ)
-else
- BUILD_LIBINSTRUMENT_LDFLAGS += -L $(INSTALL_LIBRARIES_HERE)/jli
- BUILD_LIBINSTRUMENT_LDFLAGS_SUFFIX += -ljli $(LIBDL)
+ LIBINSTRUMENT_LDFLAGS += $(JDK_OUTPUTDIR)/objs/jli_static.lib $(WIN_JAVA_LIB) \
+ -export:Agent_OnAttach advapi32.lib
+ # Statically link the C runtime so that there are not dependencies on modules
+ # not on the search patch when invoked from the Windows system directory
+ # (or elsewhere).
+ LIBINSTRUMENT_CFLAGS := $(filter-out -MD,$(LIBINSTRUMENT_CFLAGS))
+ # equivalent of strcasecmp is stricmp on Windows
+ LIBINSTRUMENT_CFLAGS += -Dstrcasecmp=stricmp
endif
$(eval $(call SetupNativeCompilation,BUILD_LIBINSTRUMENT,\
LIBRARY:=instrument, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(BUILD_LIBINSTRUMENT_SRC),\
- INCLUDE_FILES:=$(BUILD_LIBINSTRUMENT_FILES),\
+ SRC:=$(LIBINSTRUMENT_SRC),\
+ INCLUDE_FILES:=$(LIBINSTRUMENT_FILES),\
LANG:=C,\
OPTIMIZATION:=LOW, \
- CFLAGS:=$(CFLAGS_JDKLIB) \
- $(BUILD_LIBINSTRUMENT_CFLAGS),\
+ CFLAGS:=$(LIBINSTRUMENT_CFLAGS),\
CFLAGS_debug:=-DJPLIS_LOGGING,\
CFLAGS_release:=-DNO_JPLIS_LOGGING,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libinstrument/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB) $(call SET_SHARED_LIBRARY_ORIGIN)\
- $(call SET_SHARED_LIBRARY_ORIGIN,jli) \
- $(BUILD_LIBINSTRUMENT_LDFLAGS),\
- LDFLAGS_SUFFIX:=$(LIBZ) $(BUILD_LIBINSTRUMENT_LDFLAGS_SUFFIX),\
- OBJECT_DIR:=$(BUILD_LIBINSTRUMENT_DIR),\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
+ $(LIBINSTRUMENT_LDFLAGS),\
+ LDFLAGS_linux:=$(call SET_SHARED_LIBRARY_ORIGIN,/jli),\
+ LDFLAGS_solaris:= $(call SET_SHARED_LIBRARY_ORIGIN,/jli),\
+ LDFLAGS_macosx:=-Xlinker -all_load $(JDK_OUTPUTDIR)/objs/libjli_static.a \
+ -framework Cocoa -framework Security -framework ApplicationServices,\
+ LDFLAGS_SUFFIX:=$(LIBINSTRUMENT_LDFLAGS_SUFFIX),\
+ LDFLAGS_SUFFIX_macosx:=-liconv $(LIBZ),\
+ LDFLAGS_SUFFIX_solaris:=$(LIBZ) -L $(INSTALL_LIBRARIES_HERE)/jli -ljli $(LIBDL),\
+ LDFLAGS_SUFFIX_linux:=$(LIBZ) -L $(INSTALL_LIBRARIES_HERE)/jli -ljli $(LIBDL),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=instrument.dll" \
+ /D "JDK_INTERNAL_NAME=instrument" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(LIBINSTRUMENT_DIR),\
DEBUG_SYMBOLS:=true))
ifneq (,$(findstring $(OPENJDK_TARGET_OS), macosx windows))
@@ -1615,8 +1712,8 @@
##########################################################################################
BUILD_LIBMANAGEMENT_SRC:=$(JDK_TOPDIR)/src/share/native/sun/management \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/management \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/com/sun/management
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/management \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/com/sun/management
BUILD_LIBMANAGEMENT_EXCLUDES:=
@@ -1640,6 +1737,12 @@
BUILD_LIBMANAGEMENT_EXCLUDES += MacosxOperatingSystem.c
endif
+LIBMANAGEMENT_OPTIMIZATION:=HIGH
+ifneq ($(findstring $(OPENJDK_TARGET_OS),solaris linux),)
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
+ LIBMANAGEMENT_OPTIMIZATION:=LOW
+ endif
+endif
$(eval $(call SetupNativeCompilation,BUILD_LIBMANAGEMENT,\
LIBRARY:=management,\
@@ -1647,7 +1750,7 @@
SRC:=$(BUILD_LIBMANAGEMENT_SRC),\
EXCLUDE_FILES:=$(BUILD_LIBMANAGEMENT_EXCLUDES),\
LANG:=C,\
- OPTIMIZATION:=HIGH, \
+ OPTIMIZATION:=$(LIBMANAGEMENT_OPTIMIZATION), \
CFLAGS:=$(CFLAGS_JDKLIB) $(BUILD_LIBMANAGEMENT_CFLAGS),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libmanagement/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
@@ -1655,6 +1758,11 @@
LDFLAGS_windows:=$(WIN_JAVA_LIB) jvm.lib advapi32.lib psapi.lib,\
LDFLAGS_solaris:=-lkstat,\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=management.dll" \
+ /D "JDK_INTERNAL_NAME=management" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libmanagement,\
DEBUG_SYMBOLS:=true))
@@ -1664,10 +1772,10 @@
##########################################################################################
-BUILD_LIBHPROF_SRC:=$(JDK_TOPDIR)/src/share/demo/jvmti/hprof $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/demo/jvmti/hprof
+BUILD_LIBHPROF_SRC:=$(JDK_TOPDIR)/src/share/demo/jvmti/hprof $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/demo/jvmti/hprof
BUILD_LIBHPROF_CFLAGS:=-I$(JDK_TOPDIR)/src/share/demo/jvmti/hprof \
-I$(JDK_TOPDIR)/src/share/npt \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/npt \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/npt \
-I$(JDK_TOPDIR)/src/share/demo/jvmti/java_crw_demo
BUILD_LIBHPROF_LDFLAGS:=
@@ -1676,6 +1784,13 @@
BUILD_LIBHPROF_LDFLAGS += -lsocket -lnsl
endif
+LIBHPROF_OPTIMIZATION:=HIGHEST
+ifneq ($(findstring $(OPENJDK_TARGET_OS),solaris linux),)
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), yes)
+ LIBHPROF_OPTIMIZATION:=LOW
+ endif
+endif
+
ifneq ($(OPENJDK_TARGET_OS),windows)
BUILD_LIBHPROF_LDFLAGS += $(LIBDL)
endif
@@ -1685,7 +1800,7 @@
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(BUILD_LIBHPROF_SRC),\
LANG:=C,\
- OPTIMIZATION:=HIGHEST, \
+ OPTIMIZATION:=$(LIBHPROF_OPTIMIZATION), \
CFLAGS:=$(CFLAGS_JDKLIB) \
$(BUILD_LIBHPROF_CFLAGS),\
CFLAGS_debug:=-DHPROF_LOGGING,\
@@ -1694,6 +1809,11 @@
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_windows:=wsock32.lib winmm.lib advapi32.lib,\
LDFLAGS_SUFFIX:=$(BUILD_LIBHPROF_LDFLAGS),\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=hprof.dll" \
+ /D "JDK_INTERNAL_NAME=hprof" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libhprof_jvmti,\
DEBUG_SYMBOLS:=true))
@@ -1712,7 +1832,11 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjava_crw_demo/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=java_crw_demo.dll" \
+ /D "JDK_INTERNAL_NAME=java_crw_demo" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjava_crw_demo,\
DEBUG_SYMBOLS:=true))
@@ -1723,17 +1847,22 @@
$(eval $(call SetupNativeCompilation,BUILD_LIBNPT,\
LIBRARY:=npt, \
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/share/npt $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/npt,\
+ SRC:=$(JDK_TOPDIR)/src/share/npt $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/npt,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/npt \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/npt,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/npt,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnpt/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_macosx:=-liconv,\
LDFLAGS_SUFFIX_windows:=-export:nptInitialize -export:nptTerminate,\
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=npt.dll" \
+ /D "JDK_INTERNAL_NAME=npt" \
+ /D "JDK_FTYPE=0x2L",\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libnpt,\
DEBUG_SYMBOLS:=true))
@@ -1742,11 +1871,11 @@
##########################################################################################
LIBNET_SRC_DIRS:=$(JDK_TOPDIR)/src/share/native/java/net \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/net \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/net/dns \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/net/www/protocol/http/ntlm \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/net/sdp \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/net/spi
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/net \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/net/dns \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/net/www/protocol/http/ntlm \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/net/sdp \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/net/spi
LIBNET_CFLAGS:=$(foreach dir,$(LIBNET_SRC_DIRS),-I$(dir))
@@ -1767,8 +1896,6 @@
NTLMAuthSequence.c NetworkInterface_winXP.c
endif
-LIBNET_LDFLAGS_SUFFIX:=
-
$(eval $(call SetupNativeCompilation,BUILD_LIBNET,\
LIBRARY:=net,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
@@ -1781,13 +1908,19 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnet/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) $(LIBNET_LDFLAGS_SUFFIX),\
- LDFLAGS_SUFFIX_solaris:=-lnsl -lsocket $(LIBDL) ,\
- LDFLAGS_SUFFIX_linux:=$(LIBDL) -lpthread ,\
+ LDFLAGS_SUFFIX_macosx:=-ljvm -ljava,\
+ LDFLAGS_SUFFIX_solaris:=-ljvm -ljava -lnsl -lsocket $(LIBDL) ,\
+ LDFLAGS_SUFFIX_linux:=$(LIBDL) -ljvm -lpthread -ljava,\
LDFLAGS_SUFFIX_windows:=ws2_32.lib $(JVMLIB) secur32.lib iphlpapi.lib \
delayimp.lib $(WIN_JAVA_LIB) jvm.lib advapi32.lib \
/DELAYLOAD:secur32.dll /DELAYLOAD:iphlpapi.dll, \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libnet))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=net.dll" \
+ /D "JDK_INTERNAL_NAME=net" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libnet,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBNET) : $(BUILD_LIBJAVA)
@@ -1801,7 +1934,7 @@
COPY_FILES += $(JDK_OUTPUTDIR)/lib/net.properties
ifeq ($(OPENJDK_TARGET_OS), solaris)
-$(JDK_OUTPUTDIR)/lib/sdp/sdp.conf.template : $(JDK_TOPDIR)/src/${LEGACY_OPENJDK_TARGET_OS_API}/lib/sdp/sdp.conf.template
+$(JDK_OUTPUTDIR)/lib/sdp/sdp.conf.template : $(JDK_TOPDIR)/src/${OPENJDK_TARGET_OS_API_DIR}/lib/sdp/sdp.conf.template
$(ECHO) Copying $(@F)
$(MKDIR) -p $(@D)
$(CP) $< $@
@@ -1812,15 +1945,15 @@
##########################################################################################
BUILD_LIBNIO_SRC:=\
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/nio \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/ch \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/fs
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/nio \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/ch \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/fs
BUILD_LIBNIO_CFLAGS:=\
-I$(JDK_TOPDIR)/src/share/native/sun/nio/ch \
-I$(JDK_TOPDIR)/src/share/native/java/io \
-I$(JDK_TOPDIR)/src/share/native/java/net \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/net
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/net
BUILD_LIBNIO_FILES:=\
DatagramChannelImpl.c \
@@ -1847,14 +1980,14 @@
endif
ifeq ($(OPENJDK_TARGET_OS), linux)
- BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-linux
+ BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-$(OPENJDK_TARGET_OS)
BUILD_LIBNIO_FILES += \
EPoll.c \
EPollArrayWrapper.c \
EPollPort.c \
InheritedChannel.c \
NativeThread.c \
- PollArrayWrapper.c \
+ PollArrayWrapper.c \
UnixAsynchronousServerSocketChannelImpl.c \
UnixAsynchronousSocketChannelImpl.c \
GnomeFileTypeDetector.c \
@@ -1865,7 +1998,7 @@
endif
ifeq ($(OPENJDK_TARGET_OS), macosx)
- BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-bsd
+ BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-$(OPENJDK_TARGET_OS)
BUILD_LIBNIO_SRC += $(JDK_TOPDIR)/src/macosx/native/sun/nio/ch
BUILD_LIBNIO_FILES += \
InheritedChannel.c \
@@ -1873,8 +2006,8 @@
PollArrayWrapper.c \
UnixAsynchronousServerSocketChannelImpl.c \
UnixAsynchronousSocketChannelImpl.c \
- GnomeFileTypeDetector.c \
BsdNativeDispatcher.c \
+ MacOSXNativeDispatcher.c \
UnixCopyFile.c \
UnixNativeDispatcher.c \
KQueue.c \
@@ -1883,7 +2016,7 @@
endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
- BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-solaris
+ BUILD_LIBNIO_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libnio/mapfile-$(OPENJDK_TARGET_OS)
BUILD_LIBNIO_FILES += \
DevPollArrayWrapper.c \
InheritedChannel.c \
@@ -1912,17 +2045,22 @@
LDFLAGS:=$(LDFLAGS_JDKLIB) $(BUILD_LIBNIO_LDFLAGS) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX_linux:=-ljava -lnet -lpthread $(LIBDL),\
- LDFLAGS_SUFFIX_solaris:=$(LDFLAGS_JDKLIB_SUFFIX) \
- $(JVMLIB) -lsocket -lposix4 $(LIBDL) -lsendfile \
- -ljava -lnet,\
+ LDFLAGS_SUFFIX_solaris:=-ljvm -lsocket -lposix4 $(LIBDL) \
+ -lsendfile -ljava -lnet -lc,\
LDFLAGS_SUFFIX_windows:=$(LDFLAGS_JDKLIB_SUFFIX) \
$(WIN_JAVA_LIB) $(JDK_OUTPUTDIR)/objs/libnet/net.lib \
advapi32.lib jvm.lib ws2_32.lib\
$(JDK_OUTPUTDIR)/objs/libjava/io_util.obj \
$(JDK_OUTPUTDIR)/objs/libjava/FileDescriptor_md.obj ,\
- LDFLAGS_SUFFIX_macosx:=-ljava -lnet -pthread,\
+ LDFLAGS_SUFFIX_macosx:=-ljava -lnet -pthread -framework CoreFoundation,\
LDFLAGS_SUFFIX:=,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libnio))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=nio.dll" \
+ /D "JDK_INTERNAL_NAME=nio" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libnio,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBNIO)
@@ -1942,23 +2080,23 @@
$(eval $(call SetupNativeCompilation,BUILD_LIBSCTP,\
LIBRARY:=sctp,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
- SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/ch/sctp,\
+ SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/ch/sctp,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB)\
-I$(JDK_TOPDIR)/src/share/native/sun/nio/ch \
-I$(JDK_TOPDIR)/src/share/native/sun/nio/ch/sctp \
-I$(JDK_TOPDIR)/src/share/native/java/net \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/ch \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/java/net,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/ch \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/java/net,\
CFLAGS_linux:=$(SCTP_WERROR),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libsctp/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX_linux:=$(LIBDL) -lpthread,\
+ LDFLAGS_SUFFIX_linux:=-lpthread $(LIBDL) -ljava -ljvm,\
LDFLAGS_SUFFIX_posix:=-lnio -lnet,\
- LDFLAGS_SUFFIX_solaris:=-lsocket,\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ LDFLAGS_SUFFIX_solaris:=-lsocket -ljava -ljvm,\
+ LDFLAGS_SUFFIX_macosx:=-ljava -ljvm,\
INCLUDE_FILES:=SctpNet.c SctpChannelImpl.c SctpServerChannelImpl.c,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsctp))
@@ -1970,8 +2108,8 @@
##########################################################################################
-BUILD_LIBJLI_SRC_DIRS:=$(JDK_TOPDIR)/src/share/bin $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin
-BUILD_LIBJLI_CFLAGS:=$(foreach dir,$(BUILD_LIBJLI_SRC_DIRS),-I$(dir))
+BUILD_LIBJLI_SRC_DIRS:=$(JDK_TOPDIR)/src/share/bin $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin
+LIBJLI_CFLAGS:=$(CFLAGS_JDKLIB) $(foreach dir,$(BUILD_LIBJLI_SRC_DIRS),-I$(dir))
BUILD_LIBJLI_FILES:=\
java.c \
@@ -1983,16 +2121,16 @@
ifeq ($(JVM_VARIANT_ZERO), true)
ERGO_FAMILY:=zero
-else # !ZERO_BUILD
- ifneq (,$(findstring $(ARCH), amd64 x86_64))
+else
+ ifeq ($(OPENJDK_TARGET_CPU_ARCH), x86)
ERGO_FAMILY:=i586
- else # !X86 FAMILY
- ERGO_FAMILY:=$(ARCH)
- endif #ARCH_FAMILY
-endif # ZERO_BUILD
+ else
+ ERGO_FAMILY:=$(OPENJDK_TARGET_CPU_ARCH)
+ endif
+endif
ifeq ($(OPENJDK_TARGET_OS), macosx)
- BUILD_LIBJLI_CFLAGS += -I$(JDK_TOPDIR)/src/macosx/bin
+ LIBJLI_CFLAGS += -I$(JDK_TOPDIR)/src/macosx/bin
BUILD_LIBJLI_SRC_DIRS += $(JDK_TOPDIR)/src/macosx/bin
BUILD_LIBJLI_FILES += java_md_common.c java_md_macosx.c
@@ -2001,7 +2139,10 @@
endif
ifeq ($(OPENJDK_TARGET_OS), windows)
- BUILD_LIBJLI_FILES += java_md.c
+ BUILD_LIBJLI_FILES += java_md.c \
+ cmdtoargs.c
+ # Staticically link with c runtime on windows.
+ LIBJLI_CFLAGS:=$(filter-out -MD,$(LIBJLI_CFLAGS))
else ifneq ($(OPENJDK_TARGET_OS), macosx)
BUILD_LIBJLI_FILES += java_md_common.c
@@ -2011,36 +2152,23 @@
# if the architecture specific ergo file exists then
# use it, else use the generic definitions from ergo.c
- ifneq ($(wildcard $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin/$(ERGO_ARCH_FILE)),)
+ ifneq ($(wildcard $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin/$(ERGO_ARCH_FILE)),)
BUILD_LIBJLI_FILES += $(ERGO_ARCH_FILE)
else # !ERGO_ARCH_FILE
- BUILD_LIBJLI_CFLAGS += -DUSE_GENERIC_ERGO
+ LIBJLI_CFLAGS += -DUSE_GENERIC_ERGO
endif # ERGO_ARCH_FILE
endif #WINDOWS
-# Names of arch directories
-ifneq ($(OPENJDK_TARGET_OS), macosx)
- BUILD_LIBJLI_CFLAGS += -DLIBARCHNAME='"$(LIBARCH)"'
-else
- BUILD_LIBJLI_CFLAGS += -DLIBARCHNAME='"$(ARCH)"'
-endif
-ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifeq ($(OPENJDK_TARGET_CPU_ARCH), sparc)
- BUILD_LIBJLI_CFLAGS += -DLIBARCH32NAME='"sparc"'
- BUILD_LIBJLI_CFLAGS += -DLIBARCH64NAME='"sparcv9"'
- else
- BUILD_LIBJLI_CFLAGS += -DLIBARCH32NAME='"i386"'
- BUILD_LIBJLI_CFLAGS += -DLIBARCH64NAME='"amd64"'
- endif
-endif # OPENJDK_TARGET_OS
+# Append defines depending on target platform
+LIBJLI_CFLAGS += $(OPENJDK_TARGET_CPU_JLI_CFLAGS)
ifeq ($(OPENJDK_TARGET_OS), macosx)
- BUILD_LIBJLI_CFLAGS += -DPACKAGE_PATH=\"$(PACKAGE_PATH)\"
+ LIBJLI_CFLAGS += -DPACKAGE_PATH=\"$(PACKAGE_PATH)\"
endif
ifneq ($(USE_EXTERNAL_LIBZ),true)
BUILD_LIBJLI_SRC_DIRS += $(JDK_TOPDIR)/src/share/native/java/util/zip/zlib-1.2.5
- BUILD_LIBJLI_CFLAGS += $(LIBZ_INCLUDE)
+ LIBJLI_CFLAGS += $(LIBZ_INCLUDE)
BUILD_LIBJLI_FILES += \
inflate.c \
inftrees.c \
@@ -2063,13 +2191,16 @@
INCLUDE_FILES:=$(BUILD_LIBJLI_FILES),\
LANG:=C,\
OPTIMIZATION:=HIGH, \
- CFLAGS:=$(CFLAGS_JDKLIB) $(BUILD_LIBJLI_CFLAGS),\
+ CFLAGS:=$(LIBJLI_CFLAGS),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjli/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=$(LIBZ),\
- LDFLAGS_SUFFIX_posix:=$(LIBDL) -lc,\
- LDFLAGS_SUFFIX_linux:=-lpthread,\
+ LDFLAGS_linux:=$(call SET_SHARED_LIBRARY_ORIGIN,/..),\
+ LDFLAGS_solaris:=$(call SET_SHARED_LIBRARY_ORIGIN,/..),\
+ LDFLAGS_macosx:=-framework Cocoa -framework Security -framework ApplicationServices,\
+ LDFLAGS_SUFFIX_solaris:=$(LIBZ) $(LIBDL) -lc,\
+ LDFLAGS_SUFFIX_linux:=$(LIBZ) $(LIBDL) -lc -lpthread,\
+ LDFLAGS_SUFFIX_macosx:=$(LIBZ),\
LDFLAGS_SUFFIX_windows:=\
-export:JLI_Launch \
-export:JLI_ManifestIterate \
@@ -2078,11 +2209,20 @@
-export:JLI_ReportErrorMessageSys \
-export:JLI_ReportMessage \
-export:JLI_ReportExceptionDescription \
+ -export:JLI_MemAlloc \
+ -export:JLI_CmdToArgs \
+ -export:JLI_GetStdArgc \
+ -export:JLI_GetStdArgs \
advapi32.lib \
comctl32.lib \
user32.lib,\
- LDFLAGS_SUFFIX_macosx:=-framework Cocoa -framework Security -framework ApplicationServices, \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjli))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS) \
+ /D "JDK_FNAME=jli.dll" \
+ /D "JDK_INTERNAL_NAME=jli" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjli,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBJLI)
@@ -2097,7 +2237,7 @@
INCLUDE_FILES:=$(BUILD_LIBJLI_FILES),\
LANG:=C,\
OPTIMIZATION:=HIGH, \
- CFLAGS:=$(CFLAGS_JDKLIB) $(STATIC_LIBRARY_FLAGS) $(BUILD_LIBJLI_CFLAGS),\
+ CFLAGS:=$(STATIC_LIBRARY_FLAGS) $(LIBJLI_CFLAGS),\
ARFLAGS:=$(ARFLAGS),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjli_static))
@@ -2115,7 +2255,7 @@
INCLUDE_FILES:=$(BUILD_LIBJLI_FILES),\
LANG:=C,\
OPTIMIZATION:=HIGH, \
- CFLAGS:=$(CFLAGS_JDKLIB) $(BUILD_LIBJLI_CFLAGS),\
+ CFLAGS:=$(CFLAGS_JDKLIB) $(LIBJLI_CFLAGS),\
LDFLAGS:=-nostdlib -r,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjli_static))
@@ -2140,7 +2280,13 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjfr/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjfr))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jfr.dll" \
+ /D "JDK_INTERNAL_NAME=jfr" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjfr,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBJFR)
@@ -2180,11 +2326,17 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libkcms/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX_linux:=-lpthread,\
+ LDFLAGS_SUFFIX_linux:=-lc -lpthread,\
LDFLAGS_SUFFIX_windows:=$(WIN_JAVA_LIB) advapi32.lib user32.lib version.lib, \
LDFLAGS_SUFFIX:=-lm $(LDFLAGS_JDKLIB_SUFFIX),\
VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/closed/share/native/sun/java2d/cmm/kcms/cmm.rc,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libkcms))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/closed/share/native/sun/java2d/cmm/kcms/cmm.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=kcms.dll" \
+ /D "JDK_INTERNAL_NAME=kcms" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libkcms,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBKCMS) : $(BUILD_LIBJAVA)
@@ -2196,12 +2348,12 @@
ifndef OPENJDK
ifeq ($(OPENJDK_TARGET_OS), solaris)
-ifneq ($(ARCH), amd64)
+ifneq ($(OPENJDK_TARGET_CPU), x86_64)
ifeq ($(shell if test "$(OS_VERSION_MAJOR)" -eq 5 -a "$(OS_VERSION_MINOR)" -le 10; then $(ECHO) ok; fi), ok)
SUNWJDGA_MAPFILE:=
-ifneq (,$(findstring $(ARCH),sparc))
+ifeq ($(OPENJDK_TARGET_CPU_ARCH), sparc)
SUNWJDGA_MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjdga/mapfile-vers
endif
@@ -2213,12 +2365,12 @@
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/javavm/export \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/javavm/export \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export \
-I$(OPENWIN_HOME)/include, \
MAPFILE:=$(SUNWJDGA_MAPFILE), \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN), \
- LDFLAGS_SUFFIX:=-L$(OPENWIN_LIB)$(ISA_DIR) -R$(OPENWIN_LIB)$(ISA_DIR) -ldga -lX11 $(LIBDL) -lc, \
+ LDFLAGS_SUFFIX:=-L$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR) -R$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR) -ldga -lX11 $(LIBDL) -lc, \
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsunwjdga))
BUILD_LIBRARIES += $(BUILD_LIBSUNWJDGA)
@@ -2245,13 +2397,13 @@
$(CUPS_CFLAGS) \
$(X_CFLAGS) \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/java2d \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/java2d \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/loops \
-I$(JDK_TOPDIR)/src/share/native/sun/java2d/pipe \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/jdga \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/jdga \
$(foreach dir,$(LIBAWT_HEADLESS_DIRS),-I$(dir))
LIBAWT_HEADLESS_FILES:=\
@@ -2282,12 +2434,10 @@
AccelGlyphCache.c \
CUPSfuncs.c
-LIBAWT_HEADLESS_LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) -lawt -lm
-
LIBAWT_HEADLESS_REORDER:=
ifeq ($(OPENJDK_TARGET_OS), solaris)
- ifneq ($(ARCH), amd64)
- LIBAWT_HEADLESS_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libawt_headless/reorder-$(ARCH)
+ ifneq ($(OPENJDK_TARGET_CPU), x86_64)
+ LIBAWT_HEADLESS_REORDER:=$(JDK_TOPDIR)/makefiles/mapfiles/libawt_headless/reorder-$(OPENJDK_TARGET_CPU)
endif
endif
@@ -2302,11 +2452,15 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libawt_headless/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
+ LDFLAGS_linux:=$(call SET_SHARED_LIBRARY_ORIGIN,/..),\
+ LDFLAGS_solaris:=$(call SET_SHARED_LIBRARY_ORIGIN,/..) \
+ -R/usr/dt/lib$(OPENJDK_TARGET_CPU_ISADIR) \
+ -R$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR),\
+ LDFLAGS_macosx:=$(call SET_SHARED_LIBRARY_ORIGIN).,\
REORDER:=$(LIBAWT_HEADLESS_REORDER), \
- LDFLAGS_SUFFIX:=$(LIBAWT_HEADLESS_LDFLAGS_SUFFIX),\
- LDFLAGS_SUFFIX_posix:=$(LIBDL),\
- LDFLAGS_SUFFIX_macosx:=$(LIBCXX), \
- LDFLAGS_SUFFIX_solaris:=$(LIBCXX), \
+ LDFLAGS_SUFFIX_linux:=-ljvm -lawt -lm $(LIBDL) -ljava,\
+ LDFLAGS_SUFFIX_solaris:=$(LIBDL) -ljvm -lawt -lm -ljava $(LIBCXX), \
+ LDFLAGS_SUFFIX_macosx:=-ljvm $(LIBCXX) -lawt $(LIBDL) -ljava, \
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libawt_headless))
$(BUILD_LIBAWT_HEADLESS) : $(BUILD_LIBAWT)
@@ -2324,7 +2478,7 @@
$(JDK_TOPDIR)/src/share/native/sun/awt/image/jpeg \
$(JDK_TOPDIR)/src/share/native/sun/awt/libpng \
$(JDK_TOPDIR)/src/share/native/sun/awt/splashscreen \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/awt/splashscreen
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/awt/splashscreen
LIBSPLASHSCREEN_CFLAGS:=-DSPLASHSCREEN -DPNG_NO_MMX_CODE \
$(foreach dir,$(LIBSPLASHSCREEN_DIRS),-I$(dir))
@@ -2458,7 +2612,7 @@
-F/System/Library/Frameworks/JavaVM.framework/Frameworks \
-framework JavaNativeFoundation
else ifneq ($(OPENJDK_TARGET_OS), windows)
- LIBSPLASHSCREEN_LDFLAGS_SUFFIX += -L$(OPENWIN_LIB)$(ISA_DIR) -lX11 -lXext $(LIBM) -lpthread
+ LIBSPLASHSCREEN_LDFLAGS_SUFFIX += -L$(OPENWIN_LIB)$(OPENJDK_TARGET_CPU_ISADIR) -lX11 -lXext $(LIBM) -lpthread
else # OPENJDK_TARGET_OS
LIBSPLASHSCREEN_LDFLAGS_SUFFIX += kernel32.lib user32.lib gdi32.lib delayimp.lib /DELAYLOAD:user32.dll
endif # OPENJDK_TARGET_OS
@@ -2474,9 +2628,14 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libsplashscreen/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX_linux:=$(LIBDL), \
LDFLAGS_SUFFIX:=$(LIBSPLASHSCREEN_LDFLAGS_SUFFIX) $(LIBZ),\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsplashscreen))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=splashscreen.dll" \
+ /D "JDK_INTERNAL_NAME=splashscreen" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsplashscreen,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(LIBSPLASHSCREEN)
@@ -2508,11 +2667,17 @@
CFLAGS:=$(CFLAGS_JDKLIB) \
$(LIBDCPR_CFLAGS), \
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libdcpr/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB) $(LIBM)\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ LDFLAGS_SUFFIX:=$(LIBM) $(LDFLAGS_JDKLIB_SUFFIX),\
LDFLAGS_SUFFIX_posix:=-lm,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libdcpr))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=dcpr.dll" \
+ /D "JDK_INTERNAL_NAME=dcpr" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libdcpr,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBDCPR) : $(BUILD_LIBJAVA)
@@ -2526,20 +2691,26 @@
LIBRARY:=j2pcsc,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/security/smartcardio \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/smartcardio,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/smartcardio,\
LANG:=C,\
CFLAGS_posix:=-D__sun_jdk,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/sun/security/smartcardio \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/smartcardio\
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/smartcardio/MUSCLE,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/smartcardio\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/smartcardio/MUSCLE,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libj2pcsc/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX_posix:=$(LIBDL), \
LDFLAGS_SUFFIX_windows:=winscard.lib,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libj2pcsc))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=j2pcsc.dll" \
+ /D "JDK_INTERNAL_NAME=j2pcsc" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libj2pcsc,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBJ2PCSC)
@@ -2550,12 +2721,12 @@
LIBRARY:=j2gss,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/security/jgss/wrapper \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/jgss/wrapper,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/jgss/wrapper,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/sun/security/jgss/wrapper \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/jgss/wrapper,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/jgss/wrapper,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libj2gss/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
@@ -2571,7 +2742,7 @@
ifeq ($(OPENJDK_TARGET_OS), windows)
BUILD_LIBKRB5_NAME:=w2k_lsa_auth
BUILD_LIBKRB5_FILES:=NativeCreds.c WindowsDirectory.c
- BUILD_LIBKRB5_SRC:=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/krb5
+ BUILD_LIBKRB5_SRC:=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/krb5
BUILD_LIBKRB5_LIBS:=Secur32.lib netapi32.lib \
kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib \
advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib \
@@ -2593,11 +2764,17 @@
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/sun/security/krb5 \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/krb5 ,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/krb5 ,\
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX:=$(BUILD_LIBKRB5_LIBS) ,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libkrb5))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=$(BUILD_LIBKRB5_NAME).dll" \
+ /D "JDK_INTERNAL_NAME=$(BUILD_LIBKRB5_NAME)" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libkrb5,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBKRB5)
endif
@@ -2610,46 +2787,56 @@
LIBRARY:=sunmscapi,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/security/mscapi \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/mscapi,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/mscapi,\
INCLUDE_FILES:=security.cpp, \
LANG:=C++,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/sun/security/mscapi \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/mscapi ,\
- LDFLAGS:=$(LDFLAGS_JDKLIB) \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/mscapi ,\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX:=Crypt32.Lib advapi32.lib,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsunmscapi))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=sunmscapi.dll" \
+ /D "JDK_INTERNAL_NAME=sunmscapi" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsunmscapi,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBSUNMSCAPI)
endif
##########################################################################################
-ifneq ($(OPENJDK_TARGET_OS)-$(ARCH_DATA_MODEL), windows-64)
$(eval $(call SetupNativeCompilation,BUILD_LIBJ2PKCS11,\
LIBRARY:=j2pkcs11,\
OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
SRC:=$(JDK_TOPDIR)/src/share/native/sun/security/pkcs11 \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/pkcs11 \
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/pkcs11 \
$(JDK_TOPDIR)/src/share/native/sun/security/pkcs11/wrapper \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/pkcs11/wrapper,\
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/pkcs11/wrapper,\
LANG:=C,\
OPTIMIZATION:=LOW, \
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/share/native/sun/security/pkcs11 \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/pkcs11 \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/pkcs11 \
-I$(JDK_TOPDIR)/src/share/native/sun/security/pkcs11/wrapper \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/security/pkcs11/wrapper,\
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/security/pkcs11/wrapper,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libj2pkcs11/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX_posix:=$(LIBDL), \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libj2pkcs11))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=j2pkcs11.dll" \
+ /D "JDK_INTERNAL_NAME=j2pkcs11" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libj2pkcs11,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBJ2PKCS11)
-endif
##########################################################################################
@@ -2685,11 +2872,18 @@
CXXFLAGS:=$(filter-out $(ECC_JNI_SOLSPARC_FILTER), $(CXXFLAGS_JDKLIB)) \
$(BUILD_LIBSUNEC_FLAGS),\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libsunec/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB) \
- $(call SET_SHARED_LIBRARY_ORIGIN),\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK),\
+ LDFLAGS_macosx:=$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX:=$(LIBCXX),\
+ LDFLAGS_SUFFIX_linux:=-lc ,\
LDFLAGS_SUFFIX_solaris:=-lc ,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsunec))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=sunec.dll" \
+ /D "JDK_INTERNAL_NAME=sunec" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libsunec,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
BUILD_LIBRARIES += $(BUILD_LIBSUNEC)
endif
@@ -2698,7 +2892,7 @@
LIBJSOUND_SRC_DIRS:=\
$(JDK_TOPDIR)/src/share/native/com/sun/media/sound \
- $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/com/sun/media/sound
+ $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/com/sun/media/sound
LIBJSOUND_SRC_FILES:=Utilities.c Platform.c
@@ -2781,29 +2975,29 @@
ifeq ($(JVM_VARIANT_ZERO), true)
LIBJSOUND_CFLAGS += -DX_ARCH=X_ZERO
else
- ifeq ($(ARCH), i586)
+ ifeq ($(OPENJDK_TARGET_CPU), x86)
LIBJSOUND_CFLAGS += -DX_ARCH=X_I586
- endif # ARCH i586
-
- ifeq ($(ARCH), sparc)
+ endif
+
+ ifeq ($(OPENJDK_TARGET_CPU), sparc)
LIBJSOUND_CFLAGS += -DX_ARCH=X_SPARC
- endif # ARCH sparc
-
- ifeq ($(ARCH), sparcv9)
+ endif
+
+ ifeq ($(OPENJDK_TARGET_CPU), sparcv9)
LIBJSOUND_CFLAGS += -DX_ARCH=X_SPARCV9
- endif # ARCH sparcv9
-
- ifeq ($(ARCH), amd64)
+ endif
+
+ ifeq ($(OPENJDK_TARGET_CPU), x86_64)
LIBJSOUND_CFLAGS += -DX_ARCH=X_AMD64
- endif # ARCH amd64
-
- ifeq ($(ARCH), arm)
+ endif
+
+ ifeq ($(OPENJDK_TARGET_CPU), arm)
LIBJSOUND_CFLAGS += -DX_ARCH=X_ARM
- endif # ARCH arm
-
- ifeq ($(ARCH), ppc)
+ endif
+
+ ifeq ($(OPENJDK_TARGET_CPU), ppc)
LIBJSOUND_CFLAGS += -DX_ARCH=X_PPC
- endif # ARCH ppc
+ endif
endif
LIBJSOUND_CFLAGS += -DEXTRA_SOUND_JNI_LIBS='"$(EXTRA_SOUND_JNI_LIBS)"'
@@ -2815,18 +3009,25 @@
INCLUDE_FILES:=$(LIBJSOUND_SRC_FILES),\
LANG:=$(LIBJSOUND_LANG),\
OPTIMIZATION:=LOW, \
- CFLAGS:=$(CFLAGS_JDKLIB) $(LIBJSOUND_CFLAGS), \
+ CFLAGS:=$(CFLAGS_JDKLIB) \
+ $(LIBJSOUND_CFLAGS), \
CXXFLAGS:=$(CXXFLAGS_JDKLIB) $(LIBJSOUND_CFLAGS), \
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjsound/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB)\
$(call SET_SHARED_LIBRARY_ORIGIN),\
+ LDFLAGS_macosx:=-framework CoreAudio -framework CoreFoundation \
+ -framework CoreServices -framework AudioUnit $(LIBCXX) \
+ -framework CoreMIDI -framework AudioToolbox,\
LDFLAGS_windows:=$(WIN_JAVA_LIB) advapi32.lib winmm.lib,\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX),\
+ LDFLAGS_SUFFIX:=-ljava -ljvm,\
LDFLAGS_SUFFIX_solaris:=-lc ,\
- LDFLAGS_SUFFIX_macosx:=-framework CoreAudio -framework CoreFoundation \
- -framework CoreServices -framework AudioUnit $(LIBCXX) \
- -framework CoreMIDI -framework AudioToolbox ,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsound))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jsound.dll" \
+ /D "JDK_INTERNAL_NAME=jsound" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsound,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJSOUND) : $(BUILD_LIBJAVA)
@@ -2860,7 +3061,7 @@
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libjsoundalsa/mapfile-vers, \
LDFLAGS:=$(LDFLAGS_JDKLIB)\
$(call SET_SHARED_LIBRARY_ORIGIN),\
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) -lasound,\
+ LDFLAGS_SUFFIX:=-lasound -ljava -ljvm,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsoundalsa))
$(BUILD_LIBJSOUNDALSA) : $(BUILD_LIBJAVA)
@@ -2884,10 +3085,16 @@
CFLAGS:=$(CFLAGS_JDKLIB) \
$(LIBJSOUND_CFLAGS) \
-DUSE_DAUDIO=TRUE, \
- LDFLAGS:=$(LDFLAGS_JDKLIB)\
+ LDFLAGS:=$(LDFLAGS_JDKLIB) $(LDFLAGS_CXX_JDK) \
$(call SET_SHARED_LIBRARY_ORIGIN),\
LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) dsound.lib winmm.lib user32.lib ole32.lib,\
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsoundds))
+ VERSIONINFO_RESOURCE:=$(JDK_TOPDIR)/src/windows/resource/version.rc,\
+ RC_FLAGS:=$(RC_FLAGS)\
+ /D "JDK_FNAME=jsoundds.dll" \
+ /D "JDK_INTERNAL_NAME=jsoundds" \
+ /D "JDK_FTYPE=0x2L",\
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjsoundds,\
+ DEBUG_SYMBOLS:=$(WINDOWS_ONLY)))
$(BUILD_LIBJSOUNDDS) : $(BUILD_LIBJAVA)
@@ -2909,8 +3116,7 @@
CFLAGS:=$(CFLAGS_JDKLIB) \
-I$(JDK_TOPDIR)/src/closed/solaris/native/com/oracle/security/ucrypto ,\
MAPFILE:=$(JDK_TOPDIR)/makefiles/mapfiles/libj2ucrypto/mapfile-vers, \
- LDFLAGS:=$(LDFLAGS_JDKLIB)\
- $(call SET_SHARED_LIBRARY_ORIGIN), \
+ LDFLAGS:=$(LDFLAGS_JDKLIB),\
LDFLAGS_SUFFIX:=$(LIBDL),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libj2ucrypto))
@@ -2944,11 +3150,11 @@
-F/System/Library/Frameworks/ApplicationServices.framework/Frameworks, \
LDFLAGS:=$(LDFLAGS_JDKLIB)\
$(call SET_SHARED_LIBRARY_ORIGIN), \
- LDFLAGS_SUFFIX:=$(LDFLAGS_JDKLIB_SUFFIX) \
- -framework Cocoa \
- -framework Carbon \
- -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
- -framework JavaNativeFoundation, \
+ LDFLAGS_SUFFIX:=-framework Cocoa \
+ -framework Carbon \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -framework JavaNativeFoundation \
+ $(LDFLAGS_JDKLIB_SUFFIX),\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libAppleScriptEngine))
$(BUILD_LIBAPPLESCRIPTENGINE) : $(BUILD_LIBJAVA)
@@ -3161,20 +3367,19 @@
-F/System/Library/Frameworks/ApplicationServices.framework/Frameworks,\
LDFLAGS:=$(LDFLAGS_JDKLIB)\
$(call SET_SHARED_LIBRARY_ORIGIN), \
- LDFLAGS_SUFFIX_macosx:=\
- -lawt -lmlib_image -losxapp $(LDFLAGS_JDKLIB_SUFFIX) $(LIBM) \
- -framework Accelerate \
- -framework ApplicationServices \
- -framework AudioToolbox \
- -framework Carbon \
- -framework Cocoa \
- -framework Security \
- -framework ExceptionHandling \
- -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
- -framework JavaNativeFoundation \
- -framework JavaRuntimeSupport \
- -framework OpenGL \
- -framework QuartzCore ,\
+ LDFLAGS_SUFFIX_macosx:=-lawt -lmlib_image -losxapp -ljvm $(LIBM) \
+ -framework Accelerate \
+ -framework ApplicationServices \
+ -framework AudioToolbox \
+ -framework Carbon \
+ -framework Cocoa \
+ -framework Security \
+ -framework ExceptionHandling \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -framework JavaNativeFoundation \
+ -framework JavaRuntimeSupport \
+ -framework OpenGL \
+ -framework QuartzCore -ljava,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libawt_lwawt))
BUILD_LIBRARIES += $(BUILD_LIBAWT_LWAWT)
@@ -3216,16 +3421,16 @@
-I$(JDK_TOPDIR)/src/macosx/native/sun/awt \
-F/System/Library/Frameworks/JavaVM.framework/Frameworks, \
LDFLAGS:=$(LDFLAGS_JDKLIB)\
- $(call SET_SHARED_LIBRARY_ORIGIN), \
- LDFLAGS_SUFFIX_macosx:=\
- $(LDFLAGS_JDKLIB_SUFFIX) \
- -lawt -losxapp -lawt_lwawt \
- -framework Cocoa \
- -framework Carbon \
- -framework ApplicationServices \
- -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
- -framework JavaNativeFoundation \
- -framework JavaRuntimeSupport, \
+ $(call SET_SHARED_LIBRARY_ORIGIN) \
+ -Xlinker -rpath -Xlinker @loader_path,\
+ LDFLAGS_SUFFIX_macosx:=-lawt -losxapp -lawt_lwawt \
+ -framework Cocoa \
+ -framework Carbon \
+ -framework ApplicationServices \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -framework JavaNativeFoundation \
+ -framework JavaRuntimeSupport \
+ -ljava -ljvm,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libosxui))
BUILD_LIBRARIES += $(BUILD_LIBOSXUI)
@@ -3244,9 +3449,33 @@
ifeq ($(OPENJDK_TARGET_OS), macosx)
-$(eval $(call SetupNativeCompilation,BUILD_LIBJOBJC,\
+# Ugly hack to mimic behaviour in old build where this is built as an xcode project.
+SET_SHARED_LIBRARY_NAME=-Xlinker -install_name -Xlinker /usr/local/lib/libJObjC.dylib
+
+$(eval $(call SetupNativeCompilation,BUILD_LIBJOBJC32,\
LIBRARY:=JObjC,\
- OUTPUT_DIR:=$(INSTALL_LIBRARIES_HERE),\
+ OUTPUT_DIR:=$(JDK_OUTPUTDIR)/objs/libjobjc32,\
+ SRC:=$(JDK_TOPDIR)/src/macosx/native/jobjc/src/core/native \
+ $(JDK_TOPDIR)/src/macosx/native/jobjc/src/runtime-additions/native ,\
+ LANG:=C,\
+ OPTIMIZATION:=LOW, \
+ CFLAGS:=-fpascal-strings \
+ -fobjc-gc \
+ -gdwarf-2 \
+ $(CFLAGS_JDKLIB) \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -m32,\
+ LDFLAGS:=$(LDFLAGS_JDKLIB)\
+ -m32, \
+ LDFLAGS_SUFFIX:=-framework Foundation -framework JavaVM \
+ -F/System/Library/Frameworks/JavaVM.framework/Frameworks \
+ -framework JavaNativeFoundation \
+ -lffi, \
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjobjc32))
+
+$(eval $(call SetupNativeCompilation,BUILD_LIBJOBJC64,\
+ LIBRARY:=JObjC,\
+ OUTPUT_DIR:=$(JDK_OUTPUTDIR)/objs/libjobjc64,\
SRC:=$(JDK_TOPDIR)/src/macosx/native/jobjc/src/core/native \
$(JDK_TOPDIR)/src/macosx/native/jobjc/src/runtime-additions/native ,\
LANG:=C,\
@@ -3266,9 +3495,12 @@
-F/System/Library/Frameworks/JavaVM.framework/Frameworks \
-framework JavaNativeFoundation \
-lffi, \
- OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjobjc))
-
-BUILD_LIBRARIES += $(BUILD_LIBJOBJC)
+ OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/libjobjc64))
+
+$(INSTALL_LIBRARIES_HERE)/$(LIBRARY_PREFIX)JObjC$(SHARED_LIBRARY_SUFFIX): $(BUILD_LIBJOBJC32) $(BUILD_LIBJOBJC64)
+ $(LIPO) -create -output $@ $(BUILD_LIBJOBJC32) $(BUILD_LIBJOBJC64)
+
+BUILD_LIBRARIES += $(INSTALL_LIBRARIES_HERE)/$(LIBRARY_PREFIX)JObjC$(SHARED_LIBRARY_SUFFIX)
endif
--- a/jdk/makefiles/CopyFiles.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CopyFiles.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -47,12 +47,12 @@
$(INCLUDEDIR)/%.h: $(JDK_TOPDIR)/src/share/javavm/export/%.h
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
-$(OPENJDK_TARGET_OS_INCLUDE)/%.h: $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/javavm/export/%.h
+$(OPENJDK_TARGET_OS_INCLUDE)/%.h: $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export/%.h
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES = $(H_TARGET_FILES)
@@ -64,7 +64,7 @@
$(SERVICETAG_LIBDIR)/jdk_header.png: $(JDK_TOPDIR)/src/share/classes/com/sun/servicetag/resources/jdk_header.png
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(CHMOD) 444 $@
@@ -79,20 +79,20 @@
$(MGMT_LIBDIR)/management.properties: $(MGMT_LIB_SRC)/management.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(CHMOD) 644 $@
# this file has different permissions...don't know why...
$(MGMT_LIBDIR)/jmxremote.access: $(MGMT_LIB_SRC)/jmxremote.access
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(CHMOD) 644 $@
$(MGMT_LIBDIR)/%: $(MGMT_LIB_SRC)/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(CHMOD) 444 $@
@@ -104,7 +104,7 @@
$(LIBDIR)/logging.properties: $(LOGGING_LIB_SRC)/logging.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/logging.properties
@@ -119,7 +119,7 @@
$(LIBDIR)/%: $(PSFONTPROPFILE_SRC_DIR)/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(PSFONTPROPFILE_TARGET_FILES)
@@ -129,24 +129,24 @@
# Copy flavormap.properties, cursor.properties and cursors gif files to LIBDIR
#
ifneq ($(OPENJDK_TARGET_OS), macosx)
-OPENJDK_TARGET_OS_LIB_SRC = $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/lib
+OPENJDK_TARGET_OS_LIB_SRC = $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/lib
else
OPENJDK_TARGET_OS_LIB_SRC = $(JDK_TOPDIR)/src/macosx/lib
endif
$(LIBDIR)/flavormap.properties: $(OPENJDK_TARGET_OS_LIB_SRC)/flavormap.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/flavormap.properties
CURSORS_DEST_DIR = $(LIBDIR)/images/cursors
-CURSORS_OPENJDK_TARGET_OS_LIB_SRC = $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/lib/images/cursors
+CURSORS_OPENJDK_TARGET_OS_LIB_SRC = $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/lib/images/cursors
$(CURSORS_DEST_DIR)/cursors.properties: $(CURSORS_OPENJDK_TARGET_OS_LIB_SRC)/cursors.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(CURSORS_DEST_DIR)/cursors.properties
@@ -161,18 +161,18 @@
$(CURSORS_DEST_DIR)/%: $(CURSORS_LIB_SRC)/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(CURSORS_TARGET_FILES)
##########################################################################################
-CONTENT_TYPES_SRC=$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/lib
+CONTENT_TYPES_SRC=$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/lib
$(LIBDIR)/content-types.properties: $(CONTENT_TYPES_SRC)/content-types.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/content-types.properties
@@ -183,7 +183,7 @@
$(LIBDIR)/calendars.properties: $(CALENDARS_SRC)/calendars.properties
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/calendars.properties
@@ -192,11 +192,11 @@
ifeq ($(OPENJDK_TARGET_OS),windows)
-TZMAPPINGS_SRC := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/lib
+TZMAPPINGS_SRC := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/lib
$(LIBDIR)/tzmappings: $(TZMAPPINGS_SRC)/tzmappings
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/tzmappings
@@ -218,7 +218,7 @@
$(ICCPROFILE_DEST_DIR)%.pf: $(ICCPROFILE_SRC_DIR)%.pf
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(CHMOD) 444 $@
@@ -248,7 +248,7 @@
FREETYPE_LIB = $(JDK_OUTPUTDIR)/bin/$(call SHARED_LIBRARY,freetype)
else
ifeq ($(USING_SYSTEM_FT_LIB), false)
- FREETYPE_LIB = $(JDK_OUTPUTDIR)/lib/$(LIBARCH)/$(call SHARED_LIBRARY,freetype).6
+ FREETYPE_LIB = $(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/$(call SHARED_LIBRARY,freetype).6
endif
endif
@@ -269,7 +269,7 @@
MSVCRNN_TARGET := $(JDK_OUTPUTDIR)/bin/$(notdir $(MSVCRNN_DLL))
$(MSVCRNN_TARGET): $(MSVCRNN_DLL)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(MSVCRNN_TARGET)
@@ -281,7 +281,7 @@
$(LIBDIR)/jvm.hprof.txt : $(HPROF_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(LIBDIR)/jvm.hprof.txt
@@ -292,26 +292,21 @@
# How to install jvm.cfg.
#
ifeq ($(JVM_VARIANT_ZERO), true)
-JVMCFG_ARCH := zero
+ JVMCFG_ARCH := zero
else
- JVMCFG_ARCH := $(ARCH)
+ JVMCFG_ARCH := $(OPENJDK_TARGET_CPU_LEGACY)
endif
ifeq ($(OPENJDK_TARGET_OS),macosx)
- ifeq ($(JVMCFG_ARCH),amd64)
- JVMCFG_ARCH := x86_64
- endif
JVMCFG_SRC := $(JDK_TOPDIR)/src/macosx/bin/$(JVMCFG_ARCH)/jvm.cfg
- JVMCFG_DIR := $(JDK_OUTPUTDIR)/lib
else
- JVMCFG_SRC := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin/$(JVMCFG_ARCH)/jvm.cfg
- JVMCFG_DIR := $(JDK_OUTPUTDIR)/lib/$(LIBARCH)
+ JVMCFG_SRC := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin/$(JVMCFG_ARCH)/jvm.cfg
endif
-
+JVMCFG_DIR := $(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)
JVMCFG := $(JVMCFG_DIR)/jvm.cfg
-ifeq ($(ARCH_DATA_MODEL),32)
+ifeq ($(OPENJDK_TARGET_CPU_BITS),32)
# On 32 bit machines, we can have client and/or server libjvms installed.
# Since the currently committed jvm.cfg expects clientANDserver, we need
# to patch the jvm.cfg when we have built only a client or only a server.
@@ -320,7 +315,7 @@
# Create a patched jvm.cfg to use -client by default and alias -server to -client.
$(JVMCFG):
$(MKDIR) -p $(@D)
- $(RM) -f $(JVMCFG)
+ $(RM) $(JVMCFG)
$(PRINTF) "-client KNOWN\n">$(JVMCFG)
$(PRINTF) "-server IGNORE\n">>$(JVMCFG)
$(PRINTF) "-hotspot ALIASED_TO -client\n">>$(JVMCFG)
@@ -334,7 +329,7 @@
$(JVMCFG):
$(MKDIR) -p $(@D)
- $(RM) -f $(JVMCFG)
+ $(RM) $(JVMCFG)
$(PRINTF) "-server KNOWN\n">$(JVMCFG)
$(PRINTF) "-client IGNORE\n">>$(JVMCFG)
$(PRINTF) "-hotspot IGNORE\n">>$(JVMCFG)
@@ -345,7 +340,7 @@
# Use the default jvm.cfg for this 32 bit setup.
$(JVMCFG): $(JVMCFG_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
endif
endif
@@ -353,7 +348,7 @@
# Use the default jvm.cfg for this 64 bit setup.
$(JVMCFG): $(JVMCFG_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
endif
@@ -378,7 +373,7 @@
$(PROPS_DST): $(PROPS_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(PROPS_DST)
@@ -390,7 +385,7 @@
$(POLICY_DST): $(POLICY_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(POLICY_DST)
@@ -402,7 +397,7 @@
$(CACERTS_DST): $(CACERTS_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(CACERTS_DST)
@@ -419,14 +414,14 @@
$(BLACKLIST_DST): $(BLACKLIST_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(BLACKLIST_DST)
$(TRUSTEDLIBS_DST): $(TRUSTEDLIBS_SRC)
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(TRUSTEDLIBS_DST)
@@ -462,7 +457,11 @@
$(RM) $@
$(CP) $< $@
-COPY_FILES += $(SHARED_FONTS_DST) $(SHARED_FONTS_DST_DIR)/fonts.dir
+COPY_FILES += $(SHARED_FONTS_DST)
+
+ifneq ($(OPENJDK_TARGET_OS), windows)
+ COPY_FILES += $(SHARED_FONTS_DST_DIR)/fonts.dir
+endif
ifeq ($(OPENJDK_TARGET_OS), linux)
@@ -537,21 +536,21 @@
_DGALIBS_amd64 = # no amd64 library yet
-DGALIBS = $(_DGALIBS_$(ARCH):%=$(JDK_OUTPUTDIR)/lib/$(LIBARCH)/%)
+DGALIBS = $(_DGALIBS_$(OPENJDK_TARGET_CPU_LEGACY):%=$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/%)
-$(JDK_OUTPUTDIR)/lib/$(LIBARCH)/libxinerama.so: $(JDK_TOPDIR)/src/closed/solaris/lib/$(ARCH)/libxinerama.so
+$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libxinerama.so: $(JDK_TOPDIR)/src/closed/solaris/lib/$(OPENJDK_TARGET_CPU_LEGACY)/libxinerama.so
$(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
$(CHMOD) 755 $@
-$(JDK_OUTPUTDIR)/lib/$(LIBARCH)/libjdgaSUNW%.so: $(JDK_TOPDIR)/src/closed/solaris/lib/$(ARCH)/libjdgaSUNW%.so
+$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libjdgaSUNW%.so: $(JDK_TOPDIR)/src/closed/solaris/lib/$(OPENJDK_TARGET_CPU_LEGACY)/libjdgaSUNW%.so
$(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
$(CHMOD) 755 $@
-$(JDK_OUTPUTDIR)/lib/$(LIBARCH)/libjdgaSUNWafb.so: $(JDK_OUTPUTDIR)/lib/$(LIBARCH)/libjdgaSUNWffb.so
+$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libjdgaSUNWafb.so: $(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libjdgaSUNWffb.so
$(MKDIR) -p $(@D)
$(RM) $@
$(LN) -s $< $@
--- a/jdk/makefiles/CopyIntoClasses.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CopyIntoClasses.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -174,11 +174,11 @@
$(shell $(MKDIR) -p $(JDK_OUTPUTDIR)/classes/META-INF/services)
# Find all META-INF/services/* files
ALL_META-INF_DIRS_share:=$(shell $(FIND) $(JDK_TOPDIR)/src/share/classes -type d -a -name META-INF)
-ALL_META-INF_DIRS_targetapi:=$(shell $(FIND) $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes -type d -a -name META-INF)
+ALL_META-INF_DIRS_targetapi:=$(shell $(FIND) $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes -type d -a -name META-INF)
# Platform specific overrides shared
ifneq ($(ALL_META-INF_DIRS_targetapi),)
ALL_META-INF_DIRS:=$(ALL_META-INF_DIRS_targetapi) \
- $(filter-out %$(patsubst $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes%,%,$(ALL_META-INF_DIRS_targetapi)),\
+ $(filter-out %$(patsubst $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes%,%,$(ALL_META-INF_DIRS_targetapi)),\
$(ALL_META-INF_DIRS_share))
else
ALL_META-INF_DIRS:=$(ALL_META-INF_DIRS_share)
@@ -216,9 +216,9 @@
$(shell $(PRINTF) "$(SRC_SERVICES_FILES)\n" | $(SED) -e 's|/[^ ]*/META-INF/services/||g'))
OUT_SERVICES_FILES_COLON:=$(addsuffix :,$(OUT_SERVICES_FILES))
# Exception handling for print services with no META-INF directory
-SRC_SERVICES_FILES_PRINT = $(wildcard $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/sun/print/services/*)
+SRC_SERVICES_FILES_PRINT = $(wildcard $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes/sun/print/services/*)
OUT_SERVICES_FILES_PRINT = $(addprefix $(JDK_OUTPUTDIR)/classes/META-INF/services/,\
- $(patsubst $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/sun/print/services/%,%,\
+ $(patsubst $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes/sun/print/services/%,%,\
$(SRC_SERVICES_FILES_PRINT)))
OUT_SERVICES_FILES_PRINT_COLON = $(addsuffix :,$(OUT_SERVICES_FILES_PRINT))
RULES_SERVICES_PRINT = $(join $(OUT_SERVICES_FILES_PRINT_COLON),$(SRC_SERVICES_FILES_PRINT))
@@ -257,23 +257,10 @@
javax.sound.midi.spi.SoundbankReader \
javax.sound.sampled.spi.AudioFileReader \
javax.sound.sampled.spi.AudioFileWriter \
- javax.sound.sampled.spi.FormatConversionProvider
-
-COPY_EXTRA += $(foreach F,$(notdir $(JAVAX_SOUND_SRC_FILES)),$(JDK_OUTPUTDIR)/classes/META-INF/services/${F})
+ javax.sound.sampled.spi.FormatConversionProvider \
+ javax.sound.sampled.spi.MixerProvider
-ifeq ($(OPENJDK_TARGET_OS)-$(ARCH),windows-ia64)
- JAVAX_SOUND_SRC_FILES += windows-ia64/javax.sound.sampled.spi.MixerProvider
- COPY_EXTRA += $(JDK_OUTPUTDIR)/classes/META-INF/services/javax.sound.sampled.spi.MixerProvider
-else ifeq ($(OPENJDK_TARGET_OS),windows)
- JAVAX_SOUND_SRC_FILES += windows-i586/javax.sound.sampled.spi.MixerProvider
- COPY_EXTRA += $(JDK_OUTPUTDIR)/classes/META-INF/services/javax.sound.sampled.spi.MixerProvider
-else ifeq ($(OPENJDK_TARGET_OS)-$(ARCH),linux-i586)
- JAVAX_SOUND_SRC_FILES += linux-i586/javax.sound.sampled.spi.MixerProvider
- COPY_EXTRA += $(JDK_OUTPUTDIR)/classes/META-INF/services/javax.sound.sampled.spi.MixerProvider
-else
- JAVAX_SOUND_SRC_FILES += javax.sound.sampled.spi.MixerProvider
- COPY_EXTRA += $(JDK_OUTPUTDIR)/classes/META-INF/services/javax.sound.sampled.spi.MixerProvider
-endif
+COPY_EXTRA += $(addprefix $(JDK_OUTPUTDIR)/classes/META-INF/services/,$(JAVAX_SOUND_SRC_FILES))
JAVAX_SOUND_RULES := $(foreach F,$(JAVAX_SOUND_SRC_FILES),$(JDK_OUTPUTDIR)/classes/META-INF/services/$(notdir $F):$(JAVAX_SOUND_SRC)/$F)
--- a/jdk/makefiles/CopySamples.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CopySamples.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -54,17 +54,17 @@
$(SAMPLE_TARGET_DIR)/dtrace/%: $(SAMPLE_SOLARIS_SOURCE_DIR)/dtrace/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(SAMPLE_TARGET_DIR)/webservices/%: $(SAMPLE_CLOSED_SOURCE_DIR)/webservices/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
$(SAMPLE_TARGET_DIR)/%: $(SAMPLE_SOURCE_DIR)/%
$(MKDIR) -p $(@D)
- $(RM) -f $@
+ $(RM) $@
$(CP) $< $@
COPY_FILES += $(SAMPLE_TARGET)
--- a/jdk/makefiles/CreateJars.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/CreateJars.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -151,10 +151,12 @@
sun/security/ec/ECDSASignature\$$$$SHA384.class \
sun/security/ec/ECDSASignature\$$$$SHA512.class \
sun/security/ec/ECDSASignature.class \
+ sun/security/ec/ECKeyFactory.class \
sun/security/ec/ECKeyPairGenerator.class \
sun/security/ec/SunEC\$$$$1.class \
sun/security/ec/SunEC.class \
sun/security/ec/SunECEntries.class \
+ sun/security/mscapi \
sun/security/pkcs11 \
com/sun/net/ssl/internal/ssl \
javax/crypto \
@@ -260,50 +262,64 @@
# Find all files in the classes dir to use as dependencies. This could be more fine granular.
ALL_FILES_IN_CLASSES := $(shell $(FIND) $(JDK_OUTPUTDIR)/classes -type f \
- | $(GREP) -v -e '/_the\.*' -e '^_the\.*')
+ | $(GREP) -v -e '/_the\.*' -e '^_the\.*' -e 'javac_state')
RT_JAR_MANIFEST_FILE := $(JDK_OUTPUTDIR)/lib/_the.rt.jar_manifest
RESOURCE_JAR_MANIFEST_FILE := $(JDK_OUTPUTDIR)/lib/_the.resources.jar_manifest
$(RT_JAR_MANIFEST_FILE): $(MAINMANIFEST) $(BEANMANIFEST)
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(SED) -e "s#@@RELEASE@@#$(RELEASE)#" \
-e "s#@@COMPANY_NAME@@#$(COMPANY_NAME)#" \
- $(MAINMANIFEST) >> $@
- $(ECHO) >> $@
- $(CAT) $(BEANMANIFEST) >> $@
+ $(MAINMANIFEST) >> $@.tmp
+ $(ECHO) >> $@.tmp
+ $(CAT) $(BEANMANIFEST) >> $@.tmp
+ $(MV) $@.tmp $@
$(RESOURCE_JAR_MANIFEST_FILE): $(MAINMANIFEST)
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(SED) -e "s#@@RELEASE@@#$(RELEASE)#" \
-e "s#@@COMPANY_NAME@@#$(COMPANY_NAME)#" \
- $(MAINMANIFEST) >> $@
+ $(MAINMANIFEST) >> $@.tmp
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/_the.jars.exclude: $(MAKEFILE)
$(MKDIR) -p $(@D)
- $(call ListPathsSafely,RT_JAR_EXCLUDES,\n, >> $@)
+ $(RM) $@ $@.tmp
+ $(call ListPathsSafely,RT_JAR_EXCLUDES,\n, >> $@.tmp)
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/classlist : $(JDK_TOPDIR)/make/tools/sharing/classlist.$(OPENJDK_TARGET_OS) \
$(MAKEFILE)
$(MKDIR) -p $(@D)
- $(RM) -f $@.temp
- $(TOOL_ADDJSUM) $< $@.temp
- $(MV) $@.temp $@
+ $(RM) $@ $@.tmp
+ $(TOOL_ADDJSUM) $< $@.tmp
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/_the.jars.contents: $(BUILD_TOOLS) $(JDK_OUTPUTDIR)/lib/_the.jars.exclude \
$(ALL_FILES_IN_CLASSES) $(JDK_OUTPUTDIR)/lib/classlist
$(MKDIR) -p $(@D)
- $(RM) $@.temp
+ $(RM) $@ $@.tmp
($(CD) $(JDK_OUTPUTDIR)/classes && \
$(TOOL_JARREORDER) \
- -o $@.temp $(JDK_OUTPUTDIR)/lib/classlist $(JDK_OUTPUTDIR)/lib/_the.jars.exclude . )
- $(MV) $@.temp $@
+ -o $@.tmp $(JDK_OUTPUTDIR)/lib/classlist $(JDK_OUTPUTDIR)/lib/_the.jars.exclude . )
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/_the.rt.jar.contents: $(JDK_OUTPUTDIR)/lib/_the.jars.contents
- $(GREP) -e '\.class$$' $(JDK_OUTPUTDIR)/lib/_the.jars.contents > $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
+ $(GREP) -e '\.class$$' $(JDK_OUTPUTDIR)/lib/_the.jars.contents > $@.tmp
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/_the.resources.jar.contents: $(JDK_OUTPUTDIR)/lib/_the.jars.contents
- $(GREP) -v -e '\.class$$' -e '/_the\.*' -e '^_the\.*' $(JDK_OUTPUTDIR)/lib/_the.jars.contents > $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
+ $(GREP) -v -e '\.class$$' \
+ -e '/_the\.*' -e '^_the\.*' -e '\\_the\.*' -e 'javac_state' \
+ $(JDK_OUTPUTDIR)/lib/_the.jars.contents > $@.tmp
+ $(MV) $@.tmp $@
RT_JAR_CREATE_OPTIONS := c0fm
ifeq ($(COMPRESS_JARS), true)
@@ -312,16 +328,22 @@
$(JDK_OUTPUTDIR)/lib/rt.jar: $(JDK_OUTPUTDIR)/lib/_the.rt.jar.contents $(RT_JAR_MANIFEST_FILE)
$(ECHO) Creating rt.jar
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(CD) $(JDK_OUTPUTDIR)/classes && \
- $(JAR) $(RT_JAR_CREATE_OPTIONS) $@ $(RT_JAR_MANIFEST_FILE) \
+ $(JAR) $(RT_JAR_CREATE_OPTIONS) $@.tmp $(RT_JAR_MANIFEST_FILE) \
@$(JDK_OUTPUTDIR)/lib/_the.rt.jar.contents
+ $(MV) $@.tmp $@
$(JDK_OUTPUTDIR)/lib/resources.jar: $(JDK_OUTPUTDIR)/lib/_the.resources.jar.contents \
$(RESOURCE_JAR_MANIFEST_FILE)
$(ECHO) Creating resources.jar
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(CD) $(JDK_OUTPUTDIR)/classes && \
- $(JAR) $(RT_JAR_CREATE_OPTIONS) $@ $(RESOURCE_JAR_MANIFEST_FILE) \
+ $(JAR) $(RT_JAR_CREATE_OPTIONS) $@.tmp $(RESOURCE_JAR_MANIFEST_FILE) \
@$(JDK_OUTPUTDIR)/lib/_the.resources.jar.contents
+ $(MV) $@.tmp $@
JARS+=$(JDK_OUTPUTDIR)/lib/rt.jar $(JDK_OUTPUTDIR)/lib/resources.jar
@@ -385,31 +407,30 @@
##########################################################################################
-ifneq ($(OPENJDK_TARGET_OS)-$(ARCH_DATA_MODEL),windows-64)
- SUNPKCS11_JAR_DST := $(JDK_OUTPUTDIR)/lib/ext/sunpkcs11.jar
+SUNPKCS11_JAR_DST := $(JDK_OUTPUTDIR)/lib/ext/sunpkcs11.jar
- ifndef OPENJDK
+ifndef OPENJDK
+
+ SUNPKCS11_JAR_SRC := $(JDK_TOPDIR)/make/closed/tools/crypto/pkcs11/sunpkcs11.jar
- SUNPKCS11_JAR_SRC := $(JDK_TOPDIR)/make/closed/tools/crypto/pkcs11/sunpkcs11.jar
-
- $(SUNPKCS11_JAR_DST) : $(SUNPKCS11_JAR_SRC)
- @$(ECHO) "\n>>>Installing prebuilt SunPKCS11 provider..."
- $(RM) $@
- $(CP) $< $@
+ $(SUNPKCS11_JAR_DST) : $(SUNPKCS11_JAR_SRC)
+ @$(ECHO) "\n>>>Installing prebuilt SunPKCS11 provider..."
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(CP) $< $@
- else
+else
- $(eval $(call SetupArchive,BUILD_SUNPKCS11_JAR,$(SUNPKCS11_JAR_DEPS),\
- SRCS:=$(JDK_OUTPUTDIR)/classes, \
- SUFFIXES:=.class,\
- INCLUDES:=sun/security/pkcs11,\
- JAR:=$(SUNPKCS11_JAR_DST), \
- SKIP_METAINF := true))
+ $(eval $(call SetupArchive,BUILD_SUNPKCS11_JAR,$(SUNPKCS11_JAR_DEPS),\
+ SRCS:=$(JDK_OUTPUTDIR)/classes, \
+ SUFFIXES:=.class,\
+ INCLUDES:=sun/security/pkcs11,\
+ JAR:=$(SUNPKCS11_JAR_DST), \
+ SKIP_METAINF := true))
- endif
+endif
- JARS += $(SUNPKCS11_JAR_DST)
-endif
+JARS += $(SUNPKCS11_JAR_DST)
##########################################################################################
@@ -421,6 +442,7 @@
$(SUNEC_JAR_DST) : $(SUNEC_JAR_SRC)
@$(ECHO) "\n>>>Installing prebuilt SunEC provider..."
+ $(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
@@ -430,12 +452,6 @@
SRCS:=$(JDK_OUTPUTDIR)/classes, \
SUFFIXES:=.class,\
INCLUDES:=sun/security/ec,\
- EXCLUDE_FILES := sun/security/ec/ECKeyFactory.class \
- sun/security/ec/ECParameters.class \
- sun/security/ec/ECPrivateKeyImpl.class \
- sun/security/ec/ECPublicKeyImpl.class \
- sun/security/ec/NamedCurve.class \
- sun/security/ec/ECKeyFactory*,\
JAR:=$(SUNEC_JAR_DST), \
SKIP_METAINF := true))
@@ -465,6 +481,7 @@
$(SUNJCE_PROVIDER_JAR_DST) : $(SUNJCE_PROVIDER_JAR_SRC)
@$(ECHO) "\n>>>Installing prebuilt SunJCE provider..."
+ $(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
else
@@ -489,6 +506,7 @@
$(JCE_JAR_DST) : $(JCE_JAR_SRC)
@$(ECHO) "\n>>>Installing prebuilt jce.jar..."
+ $(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
@@ -520,6 +538,7 @@
$(US_EXPORT_POLICY_JAR_TMP)/% : $(US_EXPORT_POLICY_JAR_SRC_DIR)/%
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
US_EXPORT_POLICY_JAR_DEPS := $(US_EXPORT_POLICY_JAR_TMP)/default_US_export.policy
@@ -552,6 +571,7 @@
$(LOCAL_POLICY_JAR_TMP)/% : $(LOCAL_POLICY_JAR_SRC_DIR)/%
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
$(eval $(call SetupArchive,BUILD_LOCAL_POLICY_JAR,$(LOCAL_POLICY_JAR_DEPS),\
@@ -576,6 +596,7 @@
$(SUNMSCAPI_JAR_DST) : $(SUNMSCAPI_JAR_SRC)
@$(ECHO) "\n>>>Installing prebuilt SunMSCAPI provider..."
+ $(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
@@ -586,9 +607,9 @@
SUFFIXES:=.class,\
INCLUDES:= sun/security/mscapi,\
JAR:=$(SUNMSCAPI_JAR_DST), \
- MANIFEST := $(JDK_TOPDIR)/make/tools/manifest.mf, \
- EXTRA_MANIFEST_ATTR := Extension-Name: javax.crypto\nImplementation-Vendor-Id: com.sun, \
- SKIP_METAINF := true))
+ MANIFEST:=$(JDK_TOPDIR)/make/tools/manifest.mf, \
+ EXTRA_MANIFEST_ATTR:=Extension-Name: javax.crypto\nImplementation-Vendor-Id: com.sun, \
+ SKIP_METAINF:=true))
endif
JARS += $(SUNMSCAPI_JAR_DST)
@@ -605,6 +626,7 @@
$(UCRYPTO_JAR_DST) : $(UCRYPTO_JAR_SRC)
@$(ECHO) "\n>>>Installing prebuilt OracleUcrypto provider..."
+ $(MKDIR) -p $(@D)
$(RM) $@
$(CP) $< $@
@@ -711,8 +733,8 @@
##########################################################################################
-include $(JDK_TOPDIR)/makefiles/docs/CORE_PKGS.gmk
-include $(JDK_TOPDIR)/makefiles/docs/NON_CORE_PKGS.gmk
+include javadoc/CORE_PKGS.gmk
+include javadoc/NON_CORE_PKGS.gmk
# The compiler should not issue a "Proprietary" warning when compiling
# classes in the com.sun.java.swing.plaf packages, since we've always
@@ -740,7 +762,7 @@
com.oracle.nio
$(IMAGES_OUTPUTDIR)/symbols/_the.symbols: $(JDK_OUTPUTDIR)/lib/rt.jar
- $(RM) -rf $(IMAGES_OUTPUTDIR)/symbols/META-INF/sym
+ $(RM) -r $(IMAGES_OUTPUTDIR)/symbols/META-INF/sym
$(MKDIR) -p $(IMAGES_OUTPUTDIR)/symbols/META-INF/sym
$(JAVA) \
-Xbootclasspath/a:$(JDK_OUTPUTDIR)/classes \
@@ -808,9 +830,10 @@
org/ietf \
org/omg \
org/w3c/dom \
- org/xml/sax
+ org/xml/sax \
+ sunw
-SRC_ZIP_SRCS = $(JDK_TOPDIR)/src/share/classes $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes
+SRC_ZIP_SRCS = $(JDK_TOPDIR)/src/share/classes $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes
SRC_ZIP_SRCS += $(JDK_OUTPUTDIR)/gensrc
SRC_ZIP_SRCS += $(JDK_OUTPUTDIR)/impsrc
SRC_ZIP_SRCS += $(JDK_OUTPUTDIR)/gendocsrc_rmic
@@ -821,17 +844,19 @@
# Need to copy launcher src files into desired directory structure
# before zipping the sources.
LAUNCHER_SRC_FILES := $(wildcard $(JDK_TOPDIR)/src/share/bin/*) \
- $(wildcard $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin/java_md*)
+ $(wildcard $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin/java_md*)
LAUNCHER_ZIP_SRC := $(patsubst $(JDK_TOPDIR)/src/share/bin/%,$(IMAGES_OUTPUTDIR)/src/launcher/%,\
- $(patsubst $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin/%,$(IMAGES_OUTPUTDIR)/src/launcher/%,\
+ $(patsubst $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin/%,$(IMAGES_OUTPUTDIR)/src/launcher/%,\
$(LAUNCHER_SRC_FILES)))
$(IMAGES_OUTPUTDIR)/src/launcher/%: $(JDK_TOPDIR)/src/share/bin/%
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
-$(IMAGES_OUTPUTDIR)/src/launcher/%: $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/bin/%
+$(IMAGES_OUTPUTDIR)/src/launcher/%: $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/bin/%
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
$(IMAGES_OUTPUTDIR)/src.zip: $(LAUNCHER_ZIP_SRC)
@@ -849,6 +874,10 @@
##########################################################################################
+-include $(CUSTOM_MAKE_DIR)/CreateJars.gmk
+
+##########################################################################################
+
all: $(JARS)
.PHONY: default all
--- a/jdk/makefiles/GendataBreakIterator.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GendataBreakIterator.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -48,10 +48,12 @@
# two files in that directory and not get anything implicit from
# surrounding directories which aren't jdk 6 compatible.
# Because we are targeting jdk 6, but the surrounding source code is jdk 7. Ugh.
-# These two files should be moved out to a build tool!
+# These two files should be moved out to a build tool! We have to disable
+# sjavac here as well.
$(eval $(call SetupJavaCompilation,BUILD_BREAKITERATOR,\
SETUP:=GENERATE_OLDBYTECODE,\
SRC:=$(TEXT_SRCDIR),\
+ DISABLE_SJAVAC:=true,\
JAVAC_SOURCE_PATH_UGLY_OVERRIDE:=$(TEXT_SRCDIR)/$(TEXT_PKG),\
INCLUDES:=$(TEXT_PKG),\
INCLUDE_FILES:=$(TEXT_SOURCES),\
@@ -70,23 +72,23 @@
BIFILES_TH = $(DATA_PKG_DIR)/th/WordBreakIteratorData_th \
$(DATA_PKG_DIR)/th/LineBreakIteratorData_th
-$(BIFILES): $(BREAK_ITERATOR_DIR)/_the.bifiles
-$(BREAK_ITERATOR_DIR)/_the.bifiles: JAVA_FLAGS += -Xbootclasspath/p:$(BREAK_ITERATOR_CLASSES)
-$(BREAK_ITERATOR_DIR)/_the.bifiles: $(BUILD_TOOLS) $(UNICODEDATA) $(BUILD_BREAKITERATOR)
+$(BIFILES): $(DATA_PKG_DIR)/_the.bifiles
+$(DATA_PKG_DIR)/_the.bifiles: JAVA_FLAGS += -Xbootclasspath/p:$(BREAK_ITERATOR_CLASSES)
+$(DATA_PKG_DIR)/_the.bifiles: $(BUILD_TOOLS) $(UNICODEDATA) $(BUILD_BREAKITERATOR)
$(ECHO) "Generating BreakIteratorData"
$(MKDIR) -p $(DATA_PKG_DIR)
- $(RM) -f $(BIFILES)
+ $(RM) $(BIFILES)
$(TOOL_GENERATEBREAKITERATORDATA) \
-o $(DATA_PKG_DIR) \
-spec $(UNICODEDATA)
$(TOUCH) $@
-$(BIFILES_TH): $(BREAK_ITERATOR_DIR)/_the.bifiles_th
-$(BREAK_ITERATOR_DIR)/_the.bifiles_th: JAVA_FLAGS += -Xbootclasspath/p:$(BREAK_ITERATOR_CLASSES)
-$(BREAK_ITERATOR_DIR)/_the.bifiles_th: $(BUILD_TOOLS) $(UNICODEDATA) $(BUILD_BREAKITERATOR)
+$(BIFILES_TH): $(DATA_PKG_DIR)/_the.bifiles_th
+$(DATA_PKG_DIR)/_the.bifiles_th: JAVA_FLAGS += -Xbootclasspath/p:$(BREAK_ITERATOR_CLASSES)
+$(DATA_PKG_DIR)/_the.bifiles_th: $(BUILD_TOOLS) $(UNICODEDATA) $(BUILD_BREAKITERATOR)
$(ECHO) "Generating BreakIteratorData_th"
$(MKDIR) -p $(DATA_PKG_DIR)/th
- $(RM) -f $(BIFILES_TH)
+ $(RM) $(BIFILES_TH)
$(TOOL_GENERATEBREAKITERATORDATA) \
-o $(DATA_PKG_DIR) \
-spec $(UNICODEDATA) \
--- a/jdk/makefiles/GendataFontConfig.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GendataFontConfig.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -26,53 +26,61 @@
GENDATA_FONT_CONFIG_DST := $(JDK_OUTPUTDIR)/lib
ifeq ($(OPENJDK_TARGET_OS), windows)
-GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/windows/classes/sun/awt/windows
-GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
-GENDATA_FONT_CONFIG_SRC_PREFIX :=
+ GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/windows/classes/sun/awt/windows
+ GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
+ GENDATA_FONT_CONFIG_SRC_PREFIX :=
endif
ifeq ($(OPENJDK_TARGET_OS), linux)
-GENDATA_FONT_CONFIG_SRC_PREFIX := linux.
-ifdef OPENJDK
-GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/fontconfigs
-GENDATA_FONT_CONFIG_SRC_FILES := \
+ GENDATA_FONT_CONFIG_SRC_PREFIX := linux.
+ ifdef OPENJDK
+ GENDATA_FONT_CONFIG_SRC_DIR := \
+ $(JDK_TOPDIR)/src/solaris/classes/sun/awt/fontconfigs
+ GENDATA_FONT_CONFIG_SRC_FILES := \
fontconfig.properties \
fontconfig.SuSE.properties \
fontconfig.Ubuntu.properties \
fontconfig.Fedora.properties
-else
-GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/closed/solaris/classes/sun/awt/fontconfigs
-GENDATA_FONT_CONFIG_SRC_FILES := \
+ else
+ GENDATA_FONT_CONFIG_SRC_DIR := \
+ $(JDK_TOPDIR)/src/closed/solaris/classes/sun/awt/fontconfigs
+ GENDATA_FONT_CONFIG_SRC_FILES := \
fontconfig.properties \
fontconfig.RedHat.5.properties \
fontconfig.RedHat.6.properties \
fontconfig.Turbo.properties \
fontconfig.SuSE.10.properties \
fontconfig.SuSE.11.properties
-endif
+ endif
endif
ifeq ($(OPENJDK_TARGET_OS), solaris)
-GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/fontconfigs
-GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
-GENDATA_FONT_CONFIG_SRC_PREFIX := solaris.
+ GENDATA_FONT_CONFIG_SRC_DIR := \
+ $(JDK_TOPDIR)/src/solaris/classes/sun/awt/fontconfigs
+ GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
+ GENDATA_FONT_CONFIG_SRC_PREFIX := solaris.
endif
ifeq ($(OPENJDK_TARGET_OS), macosx)
-GENDATA_FONT_CONFIG_SRC_DIR := $(JDK_TOPDIR)/src/macosx/classes/sun/awt/fontconfigs
-GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
-GENDATA_FONT_CONFIG_SRC_PREFIX := macosx.
-endif # OPENJDK_TARGET_OS
+ GENDATA_FONT_CONFIG_SRC_DIR := \
+ $(JDK_TOPDIR)/src/macosx/classes/sun/awt/fontconfigs
+ GENDATA_FONT_CONFIG_SRC_FILES := fontconfig.properties
+ GENDATA_FONT_CONFIG_SRC_PREFIX := macosx.
+endif
###
-$(GENDATA_FONT_CONFIG_DST)/%.src : $(GENDATA_FONT_CONFIG_SRC_DIR)/$(GENDATA_FONT_CONFIG_SRC_PREFIX)%
+$(GENDATA_FONT_CONFIG_DST)/%.src : \
+ $(GENDATA_FONT_CONFIG_SRC_DIR)/$(GENDATA_FONT_CONFIG_SRC_PREFIX)%
+ $(RM) $@
$(MKDIR) -p $(@D)
$(CP) $< $@
$(CHMOD) 644 $@
-$(GENDATA_FONT_CONFIG_DST)/%.bfc : $(GENDATA_FONT_CONFIG_SRC_DIR)/$(GENDATA_FONT_CONFIG_SRC_PREFIX)%.properties
+$(GENDATA_FONT_CONFIG_DST)/%.bfc : \
+ $(GENDATA_FONT_CONFIG_SRC_DIR)/$(GENDATA_FONT_CONFIG_SRC_PREFIX)%.properties
$(MKDIR) -p $(@D)
+ $(RM) $@
$(TOOL_COMPILEFONTCONFIG) $< $@
$(CHMOD) 444 $@
@@ -84,3 +92,4 @@
GENDATA_FONT_CONFIG := $(GENDATA_FONT_CONFIGS) $(GENDATA_BFONT_CONFIGS)
###
+
--- a/jdk/makefiles/GendataTimeZone.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GendataTimeZone.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -46,9 +46,9 @@
GENDATA_TIMEZONE_MAPFILE:=ZoneInfoMappings
$(GENDATA_TIMEZONE_DST)/$(GENDATA_TIMEZONE_MAPFILE) : $(TZFILES)
- $(RM) -rf $(GENDATA_TIMEZONE_TMP)
+ $(RM) -r $(GENDATA_TIMEZONE_TMP)
$(MKDIR) -p $(GENDATA_TIMEZONE_TMP)
- $(RM) -rf $(GENDATA_TIMEZONE_DST)
+ $(RM) -r $(GENDATA_TIMEZONE_DST)
$(MKDIR) -p $(GENDATA_TIMEZONE_DST)
$(TOOL_JAVAZIC) -V "$(GENDATA_TIMEZONE_VERSION)" -d $(GENDATA_TIMEZONE_TMP) $(TZFILES)
$(CP) -r $(GENDATA_TIMEZONE_TMP)/* $(GENDATA_TIMEZONE_DST)/
--- a/jdk/makefiles/GenerateClasses.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GenerateClasses.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -31,7 +31,7 @@
# To ensure the latest stub generator files are picked up from corba repo
# when available, we need to run with latest rmic version available.
-ifeq ($(CROSS_COMPILE_ARCH),)
+ifneq ($(COMPILE_TYPE),cross)
RMIC := $(UNCYGDRIVE) $(JDK_OUTPUTDIR)/bin/rmic
endif
--- a/jdk/makefiles/GenerateData.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GenerateData.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -67,8 +67,8 @@
$(GENDATA_CURDATA): $(JDK_TOPDIR)/src/share/classes/java/util/CurrencyData.properties $(BUILD_TOOLS)
$(MKDIR) -p $(@D)
$(RM) $@
- $(TOOL_GENERATECURRENCYDATA) -o $@.temp < $<
- $(MV) $@.temp $@
+ $(TOOL_GENERATECURRENCYDATA) -o $@.tmp < $<
+ $(MV) $@.tmp $@
$(CHMOD) 444 $@
GENDATA += $(GENDATA_CURDATA)
@@ -77,6 +77,9 @@
$(GENDATA) : $(BUILD_TOOLS)
-all: $(GENDATA)
+$(JDK_OUTPUTDIR)/classes/_the.gendata : $(GENDATA)
+ $(TOUCH) $@
+
+all: $(JDK_OUTPUTDIR)/classes/_the.gendata
.PHONY: all
--- a/jdk/makefiles/GensrcBuffer.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcBuffer.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -226,7 +226,7 @@
endif
$$($1_DST) : $$($1_DEP) $(GENSRC_BUFFER_DST)/_the.dir
- $(TOOL_SPP) < $$($1_SRC) > $$($1_OUT).temp \
+ $(TOOL_SPP) < $$($1_SRC) > $$($1_OUT).tmp \
-K$$($1_type) \
-K$$($1_category) \
-Dtype=$$($1_type) \
@@ -248,19 +248,19 @@
-Da=$$($1_a) \
-DA=$$($1_A) \
-Kbo$$($1_BO)
- $(MV) $$($1_OUT).temp $$($1_OUT)
+ $(MV) $$($1_OUT).tmp $$($1_OUT)
# Do the extra bin thing
ifeq ($$($1_BIN),1)
- $(SED) -e '/#BIN/,$$$$d' < $$($1_OUT) > $$($1_DST).temp
+ $(SED) -e '/#BIN/,$$$$d' < $$($1_OUT) > $$($1_DST).tmp
$(RM) $$($1_OUT)
- $$($1_char_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $$($1_short_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $$($1_int_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $$($1_long_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $$($1_float_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $$($1_double_CMD) < $$($1_SRC_BIN) >> $$($1_DST).temp
- $(PRINTF) "}\n" >> $$($1_DST).temp
- mv $$($1_DST).temp $$($1_DST)
+ $$($1_char_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $$($1_short_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $$($1_int_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $$($1_long_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $$($1_float_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $$($1_double_CMD) < $$($1_SRC_BIN) >> $$($1_DST).tmp
+ $(PRINTF) "}\n" >> $$($1_DST).tmp
+ mv $$($1_DST).tmp $$($1_DST)
endif
GENSRC_BUFFER += $$($1_DST)
--- a/jdk/makefiles/GensrcCharsetCoder.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcCharsetCoder.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -36,8 +36,8 @@
$(GENSRC_CHARSETCODER_DST)/CharsetDecoder.java : $(GENSRC_CHARSETCODER_TEMPLATE)
$(MKDIR) -p $(@D)
- -$(RM) $@.temp
- $(TOOL_SPP) < $< >$@.temp \
+ -$(RM) $@.tmp
+ $(TOOL_SPP) < $< >$@.tmp \
-Kdecoder \
-DA='A' \
-Da='a' \
@@ -63,7 +63,7 @@
-DnotLegal='not legal for this charset' \
-Dotypes-per-itype='chars-per-byte' \
-DoutSequence='Unicode character'
- $(MV) $@.temp $@
+ $(MV) $@.tmp $@
GENSRC_CHARSETCODER += $(GENSRC_CHARSETCODER_DST)/CharsetDecoder.java
@@ -71,8 +71,8 @@
$(GENSRC_CHARSETCODER_DST)/CharsetEncoder.java : $(GENSRC_CHARSETCODER_TEMPLATE)
$(MKDIR) -p $(@D)
- -$(RM) $@.temp
- $(TOOL_SPP) < $< >$@.temp \
+ -$(RM) $@.tmp
+ $(TOOL_SPP) < $< >$@.tmp \
-Kencoder \
-DA='An' \
-Da='an' \
@@ -98,7 +98,7 @@
-DnotLegal='not a legal sixteen-bit Unicode sequence' \
-Dotypes-per-itype='bytes-per-char' \
-DoutSequence='byte sequence in the given charset'
- $(MV) $@.temp $@
+ $(MV) $@.tmp $@
GENSRC_CHARSETCODER += $(GENSRC_CHARSETCODER_DST)/CharsetEncoder.java
--- a/jdk/makefiles/GensrcIcons.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcIcons.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -29,7 +29,7 @@
GENSRC_ICONS_DST := $(GENSRC_ICONS_TMP)/sun/awt/X11
ifdef OPENJDK
- ICONS_PATH_PREFIX := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)
+ ICONS_PATH_PREFIX := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)
else
ICONS_PATH_PREFIX := $(JDK_TOPDIR)/src/closed/solaris
endif
@@ -41,7 +41,7 @@
$(ICONS_PATH_PREFIX)/classes/sun/awt/X11/java-icon48.png
-ICONPATH := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/sun/awt/X11
+ICONPATH := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes/sun/awt/X11
GENSRC_ICONS_SRC += \
$(ICONPATH)/security-icon-bw16.png \
@@ -85,10 +85,7 @@
$(ECHO) "package sun.awt.X11;" > $$@.tmp
$(ECHO) "public class $$($1_NAME32) {" >> $$@.tmp
$(ECHO) "public static int[] $$($1_SHORTNAME) = { " >> $$@.tmp
-# TODO FIX FIX FIX
-ifneq ($(OPENJDK_TARGET_OS),macosx)
$(CAT) $$< | $(TOOL_TOBIN) >> $$@.tmp
-endif
$(ECHO) "}; }" >> $$@.tmp
$(MV) $$@.tmp $$@
@@ -99,10 +96,7 @@
$(ECHO) "package sun.awt.X11;" > $$@.tmp
$(ECHO) "public class $$($1_NAME64) {" >> $$@.tmp
$(ECHO) "public static long[] $$($1_SHORTNAME) = { " >> $$@.tmp
-# TODO FIX FIX FIX
-ifneq ($(OPENJDK_TARGET_OS),macosx)
$(CAT) $$< | $(TOOL_TOBIN) >> $$@.tmp
-endif
$(ECHO) "}; }" >> $$@.tmp
$(MV) $$@.tmp $$@
--- a/jdk/makefiles/GensrcJDWP.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcJDWP.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -31,8 +31,17 @@
$(JDK_OUTPUTDIR)/gensrc_jdwp/com/sun/tools/jdi/JDWP.java : $(JDK_TOPDIR)/makefiles/jpda/jdwp/jdwp.spec
$(MKDIR) -p $(@D)
$(MKDIR) -p $(JDK_OUTPUTDIR)/gensrc_jdwp_headers
+ $(RM) $@ $(JDK_OUTPUTDIR)/gensrc_jdwp_headers/JDWPCommands.h
$(ECHO) Creating JDWP.java and JDWPCommands.h from jdwp.spec
$(TOOL_JDWPGEN) $< -jdi $@ -include $(JDK_OUTPUTDIR)/gensrc_jdwp_headers/JDWPCommands.h
+$(JDK_OUTPUTDIR)/gensrc_jdwp_doc/jdwp-protocol.html : $(JDK_TOPDIR)/makefiles/jpda/jdwp/jdwp.spec
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(ECHO) Creating $(@F) from jdwp.spec
+ $(TOOL_JDWPGEN) $< -doc $@
+
GENSRC_JDWP:= $(JDK_OUTPUTDIR)/gensrc_jdwp/com/sun/tools/jdi/JDWP.java \
- $(JDK_OUTPUTDIR)/gensrc_jdwp_headers/JDWPCommands.h
+ $(JDK_OUTPUTDIR)/gensrc_jdwp_headers/JDWPCommands.h \
+ $(JDK_OUTPUTDIR)/gensrc_jdwp_doc/jdwp-protocol.html
+
--- a/jdk/makefiles/GensrcJObjC.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcJObjC.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -38,43 +38,71 @@
#
$(eval $(call SetupJavaCompilation,BUILD_JOBJC_PRIMITIVE_CODER,\
SETUP:=GENERATE_OLDBYTECODE,\
+ DISABLE_SJAVAC:=true,\
INCLUDES:=core/java \
com/apple,\
- HEADERS :=$(JOBJC_DST)/jni_headers/core ,\
+ HEADERS:=$(JOBJC_DST)/jni_headers/core ,\
SRC:=$(JOBJC_SRC)/src \
$(JOBJC_SRC)/src/generator/java, \
BIN:=$(JOBJC_TMP)/bin))
-GENSRC_JOBJC += $(JOBJC_TMP)/bin/_the.batch
+GENSRC_JOBJC += $(BUILD_JOBJC_PRIMITIVE_CODER)
#
-# Generate bridge support
+# Generate bridge support for select frameworks
#
BRIDGESUPPORT := $(addprefix $(JOBJC_TMP)/bridge/,$(addsuffix Full.bridgesupport,$(JOBJC_FRAMEWORKS)))
-$(JOBJC_TMP)/bridge/%Full.bridgesupport : $(FRAMEWORKS_DIR)/%.framework/Headers/*.h
- $(MKDIR) -p $(@D)
- if [ -f $(FRAMEWORKS_DIR)/$*.framework/Resources/BridgeSupport/$(@F) ]; then \
- cp $(FRAMEWORKS_DIR)/$*.framework/Resources/BridgeSupport/$(@F) $@ ;\
- else \
- $(GBM) -F complete --framework $* -o $@ ; \
- fi
+#
+# Define macro for rules to create bridge support
+# Not sure why, but if the system has this framework bridge support,
+# we appear to copy that, otherwise we run GBM which can be very slow.
+#
+define CreateBridgeSupport # Framework
+$(RM) $@ $@.tmp
+$(MKDIR) -p $(@D)
+if [ -f $(FRAMEWORKS_DIR)/$1.framework/Resources/BridgeSupport/$(@F) ]; then \
+ $(CP) $(FRAMEWORKS_DIR)/$1.framework/Resources/BridgeSupport/$(@F) $@.tmp ;\
+else \
+ $(GBM) -F complete --framework $1 -o $@.tmp ; \
+fi
+$(MV) $@.tmp $@
+endef
#
-# Find Xbootclasspath
+# Currently 3 frameworks, avoid pattern rule due to the names being conflicting
#
-$(JOBJC_TMP)/_the.generator_bootclasspath : $(JOBJC_TMP)/bin/_the.batch
+$(JOBJC_TMP)/bridge/FoundationFull.bridgesupport : \
+ $(wildcard $(FRAMEWORKS_DIR)/Foundation.framework/Headers/*.h)
+ $(call CreateBridgeSupport,Foundation)
+$(JOBJC_TMP)/bridge/CoreFoundationFull.bridgesupport : \
+ $(wildcard $(FRAMEWORKS_DIR)/CoreFoundation.framework/Headers/*.h)
+ $(call CreateBridgeSupport,CoreFoundation)
+$(JOBJC_TMP)/bridge/AppKitFull.bridgesupport : \
+ $(wildcard $(FRAMEWORKS_DIR)/AppKit.framework/Headers/*.h)
+ $(call CreateBridgeSupport,AppKit)
+
+#
+# Find Xbootclasspath, for some reason, this involves firing up Java just
+# so we can get the boot classpath, so we can remove anything in that
+# classpath that ends with "JObjC.jar", and emit the new bootclasspath.
+#
+$(JOBJC_TMP)/_the.generator_bootclasspath : $(BUILD_JOBJC_PRIMITIVE_CODER)
+ $(RM) $@
$(JAVA) -cp $(JOBJC_TMP)/bin com.apple.internal.jobjc.generator.BootClassPathMinus JObjC.jar > $@.tmp
$(MV) $@.tmp $@
-
#
# Run generator
+# Now we use bootclasspath to run java again, with the bridge support to
+# generate more source.
+# Note the use of the | (order-only) on the BRIDGESUPPORT, should serialize
+# them just in case GBM run in parallel has issues.
#
-TOOL_JOBJC := $(JAVA) -cp $(JOBJC_TMP)/bin -ea com.apple.internal.jobjc.generator.Generator
-
-$(JOBJC_TMP)/_the.generator : $(JOBJC_TMP)/bin/_the.batch $(JOBJC_TMP)/_the.generator_bootclasspath $(BRIDGESUPPORT)
+$(JOBJC_TMP)/_the.generator : $(JOBJC_TMP)/_the.generator_bootclasspath | $(BRIDGESUPPORT)
+ $(RM) $@
$(JAVA) -d64 -Xbootclasspath:`$(CAT) $(JOBJC_TMP)/_the.generator_bootclasspath` -cp $(JOBJC_TMP)/bin -ea com.apple.internal.jobjc.generator.Generator dst=$(JOBJC_DST) frameworks=$(JOBJC_TMP)/bridge
$(TOUCH) $@
GENSRC_JOBJC += $(JOBJC_TMP)/_the.generator
+
--- a/jdk/makefiles/GensrcMisc.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcMisc.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -31,12 +31,14 @@
$(JDK_OUTPUTDIR)/gensrc_misc/sun/misc/Version.java: \
$(JDK_TOPDIR)/src/share/classes/sun/misc/Version.java.template
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(ECHO) Generating sun/misc/Version.java
$(SED) -e 's/@@launcher_name@@/$(LAUNCHER_NAME)/g' \
-e 's/@@java_version@@/$(RELEASE)/g' \
-e 's/@@java_runtime_version@@/$(FULL_VERSION)/g' \
-e 's/@@java_runtime_name@@/$(RUNTIME_NAME)/g' \
- $< > $@
+ $< > $@.tmp
+ $(MV) $@.tmp $@
GENSRC_MISC += $(JDK_OUTPUTDIR)/gensrc_misc/sun/misc/Version.java
@@ -46,8 +48,10 @@
$(JDK_OUTPUTDIR)/gensrc_misc/sun/tools/jconsole/Version.java: \
$(JDK_TOPDIR)/src/share/classes/sun/tools/jconsole/Version.java.template
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$(ECHO) Generating sun/tools/jconsole/Version.java
- $(SED) -e 's/@@jconsole_version@@/$(FULL_VERSION)/g' $< > $@
+ $(SED) -e 's/@@jconsole_version@@/$(FULL_VERSION)/g' $< > $@.tmp
+ $(MV) $@.tmp $@
GENSRC_MISC += $(JDK_OUTPUTDIR)/gensrc_misc/sun/tools/jconsole/Version.java
@@ -80,12 +84,14 @@
$(JDK_OUTPUTDIR)/gensrc_c/libjdbcodbc/dummyodbc1.c :
$(MKDIR) -p $(@D)
+ $(RM) $@
$(ECHO) Creating $@
$(PRINTF) "void dummyOdbc(void){}\n" > $@
$(ECHO) Created $@
$(JDK_OUTPUTDIR)/gensrc_c/libjdbcodbc/dummyodbc2.c :
$(MKDIR) -p $(@D)
+ $(RM) $@
$(ECHO) Creating $@
$(PRINTF) "void dummyOdbc(void){}\n" > $@
$(ECHO) Created $@
@@ -110,21 +116,27 @@
SRC:=$(GENSRC_SOR_SRC),\
INCLUDE_FILES:=$(GENSRC_SOR_SRC_FILE),\
LANG:=C,\
- CC:=$(HOST_CC),\
- LDEXE:=$(HOST_LD),\
+ CC:=$(BUILD_CC),\
+ LDEXE:=$(BUILD_LD),\
OBJECT_DIR:=$(GENSRC_SOR_BIN),\
OUTPUT_DIR:=$(GENSRC_SOR_BIN),\
PROGRAM:=genSocketOptionRegistry))
-ifneq ($(JAVASE_EMBEDDED), true)
+ifneq ($(wildcard $(JDK_TOPDIR)/src/closed/solaris/classes/sun/nio/ch/SocketOptionRegistry-$(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH).java),)
+ HAS_SOCKET_OPTION_REGISTRY:=true
+endif
+
+ifneq ($(HAS_SOCKET_OTION_REGISTRY),true)
$(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/ch/SocketOptionRegistry.java : $(BUILD_GENSRC_SOR_EXE)
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
NAWK="$(NAWK)" SH="$(SH)" $(SH) -e $(JDK_TOPDIR)/makefiles/scripts/addNotices.sh "$(SOR_COPYRIGHT_YEARS)" > $@.tmp
$(BUILD_GENSRC_SOR_EXE) >> $@.tmp
$(MV) $@.tmp $@
else
$(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/ch/SocketOptionRegistry.java : $(JDK_TOPDIR)/src/closed/solaris/classes/sun/nio/ch/SocketOptionRegistry-$(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH).java
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
endif
@@ -134,7 +146,7 @@
GENSRC_MISC += $(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/fs/UnixConstants.java
-GENSRC_UC_SRC := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/fs
+GENSRC_UC_SRC := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/fs
GENSRC_UC_SRC_FILE := genUnixConstants.c
GENSRC_UC_BIN := $(JDK_OUTPUTDIR)/gensrc_misc/genUnixConstants
@@ -145,21 +157,27 @@
SRC:=$(GENSRC_UC_SRC),\
INCLUDE_FILES:=$(GENSRC_UC_SRC_FILE),\
LANG:=C,\
- CC:=$(HOST_CC),\
- LDEXE:=$(HOST_CC),\
+ CC:=$(BUILD_CC),\
+ LDEXE:=$(BUILD_CC),\
OBJECT_DIR:=$(GENSRC_UC_BIN),\
OUTPUT_DIR:=$(GENSRC_UC_BIN),\
PROGRAM:=genUnixConstants))
-ifneq ($(JAVASE_EMBEDDED), true)
+ifneq ($(wildcard $(JDK_TOPDIR)/src/closed/solaris/classes/sun/nio/fs/UnixConstants-$(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH).java),)
+ HAS_UNIX_CONSTANTS:=true
+endif
+
+ifneq ($(HAS_UNIX_CONSTANTS),true)
$(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/fs/UnixConstants.java : $(BUILD_GENSRC_UC_EXE)
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
NAWK="$(NAWK)" SH="$(SH)" $(SH) -e $(JDK_TOPDIR)/makefiles/scripts/addNotices.sh "$(UC_COPYRIGHT_YEARS)" > $@.tmp
$(BUILD_GENSRC_UC_EXE) >> $@.tmp
$(MV) $@.tmp $@
else
$(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/fs/UnixConstants.java : $(JDK_TOPDIR)/src/closed/solaris/classes/sun/nio/fs/UnixConstants-$(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU_ARCH).java
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
endif
@@ -171,7 +189,7 @@
GENSRC_MISC += $(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/fs/SolarisConstants.java
-GENSRC_SOL_SRC := $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/sun/nio/fs
+GENSRC_SOL_SRC := $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/sun/nio/fs
GENSRC_SOL_SRC_FILE := genSolarisConstants.c
GENSRC_SOL_BIN := $(JDK_OUTPUTDIR)/gensrc_misc/genSolarisConstants
@@ -182,14 +200,15 @@
SRC:=$(GENSRC_SOL_SRC),\
INCLUDE_FILES:=$(GENSRC_SOL_SRC_FILE),\
LANG:=C,\
- CC:=$(HOST_CC),\
- LDEXE:=$(HOST_CC),\
+ CC:=$(BUILD_CC),\
+ LDEXE:=$(BUILD_CC),\
OBJECT_DIR:=$(GENSRC_SOL_BIN),\
OUTPUT_DIR:=$(GENSRC_SOL_BIN),\
PROGRAM:=genSolarisConstants))
$(JDK_OUTPUTDIR)/gensrc_misc/sun/nio/fs/SolarisConstants.java : $(BUILD_GENSRC_SOL_EXE)
$(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
NAWK="$(NAWK)" SH="$(SH)" $(SH) -e $(JDK_TOPDIR)/makefiles/scripts/addNotices.sh "$(SOL_COPYRIGHT_YEARS)" > $@.tmp
$(BUILD_GENSRC_SOL_EXE) >> $@.tmp
$(MV) $@.tmp $@
--- a/jdk/makefiles/GensrcProperties.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcProperties.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -46,8 +46,9 @@
# Strip away prefix and suffix,
# leaving for example: sun/util/resources/CurrencyNames_sv
- $1_PROPPATHS:=$$(patsubst $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/%.properties,%,\
- $$(patsubst $(JDK_TOPDIR)/src/share/classes/%.properties,%,$2))
+ $1_PROPPATHS:=$$(patsubst $(JDK_TOPDIR)/src/windows/classes/%.properties,%,\
+ $$(patsubst $(JDK_TOPDIR)/src/macosx/classes/%.properties,%,\
+ $$(patsubst $(JDK_TOPDIR)/src/share/classes/%.properties,%,$2)))
# Apply optional name transformation, example: hz_TW -> hz_HK
$(if $4,$1_PROPPATHS:=$$(patsubst $4,$5,$$($1_PROPPATHS)))
@@ -75,7 +76,7 @@
# Strip away prefix and suffix,
# leaving for example: sun/util/resources/CurrencyNames_sv
- $1_PROPPATHS:=$$(patsubst $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/%.properties,%,\
+ $1_PROPPATHS:=$$(patsubst $(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/classes/%.properties,%,\
$$(patsubst $(JDK_TOPDIR)/src/share/classes/%.properties,%,$2))
# Apply optional name transformation, example: hz_TW -> hz_HK
@@ -113,6 +114,13 @@
# Some packages have properties that need to be converted to java source files.
+#com/apple/laf/resources
+ifeq ($(OPENJDK_TARGET_OS),macosx)
+ $(eval $(call add_properties_to_compile,COM_APPLE_LAF,\
+ $(shell find $(JDK_TOPDIR)/src/macosx/classes/com/apple/laf/resources -name "*.properties"),\
+ ListResourceBundle))
+endif
+
#com/sun/accessibility/internal/resources
$(eval $(call add_properties_to_compile,COM_SUN_ACCESSIBILITY,\
$(shell find $(JDK_TOPDIR)/src/share/classes/com/sun/accessibility/internal/resources -name "*.properties"),\
@@ -210,6 +218,16 @@
$(eval $(call add_properties_to_compile,SUN_AWT_HK,\
$(shell find $(JDK_TOPDIR)/src/share/classes/sun/awt/resources -name "*.properties"),\
ListResourceBundle,%zh_TW,%zh_HK))
+#sun/awt/windows/
+ifeq ($(OPENJDK_TARGET_OS),windows)
+ $(eval $(call add_properties_to_compile,SUN_AWT,\
+ $(shell find $(JDK_TOPDIR)/src/windows/classes/sun/awt/windows -name "awtLocalization*.properties"),\
+ ListResourceBundle))
+ $(eval $(call add_properties_to_compile,SUN_AWT_HK,\
+ $(shell find $(JDK_TOPDIR)/src/windows/classes/sun/awt/windows -name "awtLocalization*.properties"),\
+ ListResourceBundle,%zh_TW,%zh_HK))
+endif
+
#sun/launcher/resources
$(eval $(call add_properties_to_compile,SUN_LAUNCHER,\
$(shell find $(JDK_TOPDIR)/src/share/classes/sun/launcher/resources -name "*.properties"),\
@@ -286,7 +304,7 @@
# Now setup the rule for the generation of the resource bundles.
$(JDK_OUTPUTDIR)/gensrc_properties/_the.compiled_properties : $(ALL_COMPILED_PROPSOURCES) $(BUILD_TOOLS)
- $(RM) -rf $(JDK_OUTPUTDIR)/gensrc_properties/*
+ $(RM) -r $(JDK_OUTPUTDIR)/gensrc_properties/*
# Generate all output directories in advance since the build tool does not do that...
$(MKDIR) -p $(sort $(dir $(ALL_COMPILED_PROPJAVAS)))
$(ECHO) Compiling $(words $(ALL_COMPILED_PROPSOURCES)) properties into resource bundles
@@ -297,7 +315,7 @@
# Now setup the rule for the generation of the cleaned properties.
# FIXME: We currently don't handle removed properties incrementally.
$(JDK_OUTPUTDIR)/classes/_the.cleaned_properties : $(ALL_CLEANED_PROPSOURCES) $(BUILD_TOOLS)
- $(RM) -f $(JDK_OUTPUTDIR)/classes/_the.cleaned_properties.cmdline
+ $(RM) $(JDK_OUTPUTDIR)/classes/_the.cleaned_properties.cmdline
# Generate all output directories in advance since the build tool does not do that...
$(MKDIR) -p $(sort $(dir $(ALL_CLEANED_PROPOUTPUT)))
$(ECHO) Copying and cleaning $(words $(ALL_CLEANED_PROPSOURCES)) properties
--- a/jdk/makefiles/GensrcX11Wrappers.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/GensrcX11Wrappers.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -23,36 +23,33 @@
# questions.
#
+
+# This file is responsible for extracting the x11 native struct offsets to
+# the xawt Java library. This is done by compiling and running a native
+# binary, which dumps output to a text file. The offsets differ on 32 and 64
+# bit systems, so care must be taken here.
+
+# Note: Some of the more complex logic here is most likely not needed anymore.
+
GENSRC_X11WRAPPERS :=
GENSRC_X11WRAPPERS_TMP := $(JDK_OUTPUTDIR)/gensrc_x11wrappers
GENSRC_SIZER_SRC := $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator
-GENSRC_SIZES :=
+# Normal case is to generate version according to target bits
+GENSRC_SIZES := sizes.$(OPENJDK_TARGET_CPU_BITS)
-ifeq ($(OPENJDK_TARGET_OS)-$(LIBARCH), solaris-i386)
-GENSRC_SIZES := sizes.32 sizes.64
-else ifeq ($(OPENJDK_TARGET_OS), solaris)
-isalist:=$(shell isainfo)
-ifneq (,$(findstring sparcv9, $(isalist)))
-# On sparcv9 we generate both 32 and 64-bit sizers in spite of ARCH_DATA_MODEL.
-GENSRC_SIZES := sizes.32 sizes.64
-else
-ifneq (,$(findstring amd64, $(isalist)))
-# On amd64 we generate both 32 and 64-bit sizers in spite of ARCH_DATA_MODEL.
+ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
+ifneq ($(OPENJDK_TARGET_OS), linux)
+# On all 64-bit systems except Linux, generate both 32 and 64 bit versions
GENSRC_SIZES := sizes.32 sizes.64
-else # !sparcv9 : includes (32-bit) sparc, i586
-GENSRC_SIZES := sizes.32
-endif # amd64
-endif # sparcv9
-else # !solaris
-ifeq ($(OPENJDK_TARGET_OS), macosx)
+endif
+else
+ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU), solaris-x86)
+# As a special case, solaris on x86 (32-bit) also generates the 64-bit version
GENSRC_SIZES := sizes.32 sizes.64
-else # !macosx
-GENSRC_SIZES := sizes.$(ARCH_DATA_MODEL)
-endif # !macosx
-endif # solaris
-
+endif
+endif
##########################################################################################
@@ -62,40 +59,44 @@
$(TOOL_WRAPPERGENERATOR) $(@D) $< "sizer" $*
$(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.exe : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.c
- (cd $(@D) && $(HOST_CC) -m$* -o $@ $< \
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
+ (cd $(@D) && $(BUILD_CC) -m$* -o $@.tmp $< \
-I$(JDK_OUTPUTDIR)/include \
-I$(JDK_TOPDIR)/src/share/javavm/export \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/javavm/export \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/javavm/export \
-I$(JDK_TOPDIR)//src/share/native/common \
- -I$(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/native/common \
+ -I$(JDK_TOPDIR)/src/$(OPENJDK_TARGET_OS_API_DIR)/native/common \
-I$(JDK_TOPDIR)/src/solaris/native/sun/awt \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/debug \
-I$(JDK_TOPDIR)/src/share/native/sun/awt/image/cvutils -lc)
+ $(MV) $@.tmp $@
-ifeq ($(OPENJDK_TARGET_OS)-$(LIBARCH), solaris-i386)
-
-$(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.32 : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.32.exe
+# Run the generated sizer binary to create the sizes text file
+$(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.% : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.exe
+ $(MKDIR) -p $(@D)
+ $(RM) $@ $@.tmp
$< > $@.tmp
$(MV) $@.tmp $@
-$(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 : $(JDK_TOPDIR)/src/$(LEGACY_OPENJDK_TARGET_OS_API)/classes/sun/awt/X11/generator/sizes.64-$(OPENJDK_TARGET_OS)-$(LIBARCH)
+ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU), solaris-x86)
+ # On solaris-x86 we also need to create the 64-bit version, but we can't run a 64-bit binary
+ # As a workaround, copy this from a pre-generated file.
+$(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 : $(JDK_TOPDIR)/src/solaris/classes/sun/awt/X11/generator/sizes.64-solaris-i386
$(MKDIR) -p $(@D)
+ $(RM) $@
$(CP) $< $@
-else
-
-$(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.% : $(GENSRC_X11WRAPPERS_TMP)/sizer/sizer.%.exe
- $< > $@.tmp
- $(MV) $@.tmp $@
-
endif
$(GENSRC_X11WRAPPERS_TMP)/classes/_the.classes : $(foreach S,$(GENSRC_SIZES),$(GENSRC_X11WRAPPERS_TMP)/sizer/$(S))
+ $(RM) $@
$(MKDIR) -p $(@D)/sun/awt/X11
$(RM) $(@D)/sun/awt/X11/*
$(TOOL_WRAPPERGENERATOR) $(@D)/sun/awt/X11 $(GENSRC_SIZER_SRC)/xlibtypes.txt "gen" $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes
-ifeq ($(OPENJDK_TARGET_OS)-$(LIBARCH), solaris-amd64)
- $(ECHO) COMPARING $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 and $(GENSRC_SIZER_SRC)/sizes.64-$(OPENJDK_TARGET_OS)-i386
- $(DIFF) $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 $(GENSRC_SIZER_SRC)/sizes.64-$(OPENJDK_TARGET_OS)-i386
+ifeq ($(OPENJDK_TARGET_OS)-$(OPENJDK_TARGET_CPU), solaris-x86_64)
+ # On solaris-x86_64, as a safety measure, compare the generated file with the checked-in version
+ $(ECHO) COMPARING $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 and $(GENSRC_SIZER_SRC)/sizes.64-solaris-i386
+ $(DIFF) $(GENSRC_X11WRAPPERS_TMP)/sizer/sizes.64 $(GENSRC_SIZER_SRC)/sizes.64-solaris-i386
endif
$(TOUCH) $@
--- a/jdk/makefiles/Images.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/Images.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -32,11 +32,21 @@
include Tools.gmk
-images: jre-image jdk-image
+# Note: This double-colon rule is intentional, to support
+# custom make file integration.
+images:: jre-image jdk-image
+
+overlay-images: jre-overlay-image jdk-overlay-image
+
+
+-include $(CUSTOM_MAKE_DIR)/Images.gmk
+
ifeq ($(OPENJDK_TARGET_OS),solaris)
+# On Solaris, if the target is a symlink and exists, cp won't overwrite.
define install-file
$(MKDIR) -p $(@D)
+ $(RM) '$@'
$(CP) -f -r -P '$<' '$(@D)'
endef
else ifeq ($(OPENJDK_TARGET_OS),macosx)
@@ -51,11 +61,34 @@
endef
endif
+# Processing license files from source area to image area
+# These will be modified to have the platform specific EOL chars.
+define process-doc-file
+ $(ECHO) Processing $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(SED) 's/$$//g' $< > $@
+ $(CHMOD) 444 $@
+endef
+
+
+JDK_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2sdk-image
+JRE_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2re-image
+
+JDK_OVERLAY_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2sdk-overlay-image
+JRE_OVERLAY_IMAGE_DIR:=$(IMAGES_OUTPUTDIR)/j2re-overlay-image
+
################################################################################
#
# JRE and JDK build rules
#
################################################################################
+#
+# Variable prefixes explained:
+# JRE_ refers to files in the j2re-image.
+# JDK_ refers to files in the j2sdk-image outside of the jre subdir.
+# JDKJRE_ refers to files in the j2sdk-image inside the jre subdir.
+#
################################################################################
# /bin dir
@@ -72,6 +105,19 @@
$(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
$(install-file)
+# Overaly image targets
+$(JRE_OVERLAY_IMAGE_DIR)/bin/%: $(JDK_OUTPUTDIR)/bin/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
+$(JDK_OVERLAY_IMAGE_DIR)/bin/%: $(JDK_OUTPUTDIR)/bin/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
+$(JDK_OVERLAY_IMAGE_DIR)/jre/bin/%: $(JDK_OUTPUTDIR)/bin/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
NOT_JRE_BIN_FILES := \
appletviewer$(EXE_SUFFIX) \
extcheck$(EXE_SUFFIX) \
@@ -107,26 +153,54 @@
WINDOWS_JDK_BIN_FILES = \
$(EXE_SUFFIX) \
- $(LIB_PREFIX)jli$(SHARED_LIBRARY_SUFFIX) \
- $(MSVCRNN_DLL)
+ $(LIBRARY_PREFIX)jli$(SHARED_LIBRARY_SUFFIX) \
+ $(notdir $(MSVCRNN_DLL))
+
+WINDOWS_JDKJRE_BIN_FILES := \
+ $(LIBRARY_PREFIX)attach$(SHARED_LIBRARY_SUFFIX) \
+ $(SALIB_NAME)
# Find all files in bin dir
ALL_BIN_LIST := $(shell $(FIND) $(JDK_OUTPUTDIR)/bin -type f)
-# For unknown reason the debuginfo files for binaries are not put into images
+# For unknown reason the debuginfo files for executables are not put into images
# e.g filter them out
-ALL_BIN_LIST := $(filter-out %.debuginfo %.diz, $(ALL_BIN_LIST))
+ifneq ($(OPENJDK_TARGET_OS),windows)
+ ALL_BIN_LIST := $(filter-out %.debuginfo %.diz, $(ALL_BIN_LIST))
+else
+# On windows, the libraries are in the bin dir, only filter out debuginfo files
+# for executables. "java" is both a library and executable.
+ ALL_BIN_EXEC_FILES := $(filter-out java.exe,$(notdir $(shell $(FIND) $(JDK_OUTPUTDIR)/bin -type f -name "*.exe")))
+ ALL_BIN_DEBUG_FILTER := $(addprefix %,$(patsubst %.exe,%.debuginfo,$(ALL_BIN_EXEC_FILES)) \
+ $(patsubst %.exe,%.diz,$(ALL_BIN_EXEC_FILES))) %.pdb
+ ALL_BIN_LIST := $(filter-out $(ALL_BIN_DEBUG_FILTER),$(ALL_BIN_LIST))
+endif
ifeq ($(OPENJDK_TARGET_OS),windows)
JDK_BIN_LIST := $(filter $(addprefix %,$(WINDOWS_JDK_BIN_FILES)), $(ALL_BIN_LIST))
else
JDK_BIN_LIST := $(ALL_BIN_LIST)
endif
-JRE_BIN_LIST := $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES)), $(ALL_BIN_LIST))
+JDKJRE_BIN_LIST := $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES)), $(ALL_BIN_LIST))
+JRE_BIN_LIST := $(filter-out $(addprefix %,$(WINDOWS_JDKJRE_BIN_FILES)), $(JDKJRE_BIN_LIST))
+
+ifneq ($(OPENJDK_TARGET_CPU_ISADIR),)
+ OVERLAY_FILTER := $(JDK_OUTPUTDIR)/bin$(OPENJDK_TARGET_CPU_ISADIR)%
+endif
-JRE_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JRE_IMAGE_DIR)/%, $(JRE_BIN_LIST))
-JDK_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/%, $(JDK_BIN_LIST))
-JDKJRE_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/jre/%, $(JRE_BIN_LIST))
+JRE_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JRE_IMAGE_DIR)/%, \
+ $(filter-out $(OVERLAY_FILTER),$(JRE_BIN_LIST)))
+JDK_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/%, \
+ $(filter-out $(OVERLAY_FILTER),$(JDK_BIN_LIST)))
+JDKJRE_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/jre/%, \
+ $(filter-out $(OVERLAY_FILTER),$(JDKJRE_BIN_LIST)))
+
+JRE_OVERLAY_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JRE_OVERLAY_IMAGE_DIR)/%, \
+ $(filter $(OVERLAY_FILTER),$(JRE_BIN_LIST)))
+JDK_OVERLAY_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_OVERLAY_IMAGE_DIR)/%, \
+ $(filter $(OVERLAY_FILTER),$(JDK_BIN_LIST)))
+JDKJRE_OVERLAY_BIN_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_OVERLAY_IMAGE_DIR)/jre/%, \
+ $(filter $(OVERLAY_FILTER),$(JDKJRE_BIN_LIST)))
################################################################################
# /lib dir
@@ -143,9 +217,24 @@
$(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
$(install-file)
-JDKJRE_LIB_FILES := \
- $(LIB_PREFIX)attach$(SHARED_LIBRARY_SUFFIX) \
+# Overlay image targets
+$(JRE_OVERLAY_IMAGE_DIR)/lib/%: $(JDK_OUTPUTDIR)/lib/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
+$(JDK_OVERLAY_IMAGE_DIR)/lib/%: $(JDK_OUTPUTDIR)/lib/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
+$(JDK_OVERLAY_IMAGE_DIR)/jre/lib/%: $(JDK_OUTPUTDIR)/lib/%
+ $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(install-file)
+
+ifneq ($(OPENJDK_TARGET_OS), macosx)
+ JDKJRE_LIB_FILES := \
+ $(LIBRARY_PREFIX)attach$(SHARED_LIBRARY_SUFFIX) \
$(SALIB_NAME)
+endif
NOT_JRE_LIB_FILES := \
tools.jar \
@@ -156,12 +245,16 @@
ir.idl \
ct.sym
+ifeq ($(OPENJDK_TARGET_OS), windows)
+ NOT_JRE_LIB_FILES += jawt.lib jvm.lib
+endif
+
JDK_LIB_FILES := $(NOT_JRE_LIB_FILES)
ifeq ($(OPENJDK_TARGET_OS), linux)
JDK_LIB_FILES += jexec
endif
-ALL_LIB_LIST := $(shell $(FIND) $(JDK_OUTPUTDIR)/lib \( -type f -o -type l \) ! -name "_the*")
+ALL_LIB_LIST := $(shell $(FIND) $(JDK_OUTPUTDIR)/lib \( -type f -o -type l \) -a ! \( -name "_the*" -o -name "javac_state " \) )
JRE_LIB_LIST := $(filter-out $(addprefix %,$(NOT_JRE_LIB_FILES) $(JDKJRE_LIB_FILES)),$(ALL_LIB_LIST))
JDKJRE_LIB_LIST := $(filter-out $(addprefix %,$(NOT_JRE_LIB_FILES)),$(ALL_LIB_LIST))
JDK_LIB_LIST := $(filter $(addprefix %,$(JDK_LIB_FILES)),$(ALL_LIB_LIST))
@@ -170,6 +263,13 @@
JDK_LIB_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/%,$(JDK_LIB_LIST))
JDKJRE_LIB_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/%,$(JDK_IMAGE_DIR)/jre/%,$(JDKJRE_LIB_LIST))
+JRE_OVERLAY_LIB_TARGETS := $(subst $(JRE_IMAGE_DIR),$(JRE_OVERLAY_IMAGE_DIR),\
+ $(filter $(JRE_IMAGE_DIR)/lib$(OPENJDK_TARGET_CPU_ISADIR)/%,$(JRE_LIB_TARGETS)))
+JDK_OVERLAY_LIB_TARGETS := $(subst $(JDK_IMAGE_DIR),$(JDK_OVERLAY_IMAGE_DIR),\
+ $(filter $(JDK_IMAGE_DIR)/lib$(OPENJDK_TARGET_CPU_ISADIR)/%,$(JDK_LIB_TARGETS)))
+JDKJRE_OVERLAY_LIB_TARGETS := $(subst $(JDK_IMAGE_DIR),$(JDK_OVERLAY_IMAGE_DIR),\
+ $(filter $(JDK_IMAGE_DIR)/jre/lib$(OPENJDK_TARGET_CPU_ISADIR)/%,$(JDKJRE_LIB_TARGETS)))
+
# CTE plugin security change require new empty directory lib/applet
$(JRE_IMAGE_DIR)/lib/applet:
$(ECHO) Creating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
@@ -179,19 +279,20 @@
$(ECHO) Creating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
$(MKDIR) -p $@
+# In the old build, JObjC.jar is not part of the meta-index
$(JRE_IMAGE_DIR)/lib/meta-index: $(JRE_LIB_TARGETS)
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index *.jar
+ $(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index `$(LS) *.jar | $(SED) 's/JObjC\.jar//g'`
$(JDK_IMAGE_DIR)/jre/lib/meta-index: $(JDKJRE_LIB_TARGETS)
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index *.jar
+ $(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index `$(LS) *.jar | $(SED) 's/JObjC\.jar//g'`
$(JRE_IMAGE_DIR)/lib/ext/meta-index: $(JRE_LIB_TARGETS)
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
$(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index *.jar
-$(JDK_IMAGE_DIR)/jre/lib/ext/meta-index: $(JRE_LIB_TARGETS)
+$(JDK_IMAGE_DIR)/jre/lib/ext/meta-index: $(JDKJRE_LIB_TARGETS)
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
$(CD) $(@D) && $(TOOL_BUILDMETAINDEX) -o meta-index *.jar
@@ -378,12 +479,12 @@
# /demo dir
ifndef NO_DEMOS
-# FIXME: newdemo/applets/GraphLayout/GraphPanel$2.class is sometimes not copied.
+# FIXME: demo/applets/GraphLayout/GraphPanel$2.class is sometimes not copied.
# The db demo contains an empty dir that needs to be copied. The other
# directories will always trigger the rule for recompile since
# _the.list_of_packages files are touched.
- $(JDK_IMAGE_DIR)/demo/%: $(JDK_OUTPUTDIR)/newdemo/%
+ $(JDK_IMAGE_DIR)/demo/%: $(JDK_OUTPUTDIR)/demo/%
if [ ! -d "$@" ]; then \
$(ECHO) Copying '$(patsubst $(OUTPUT_ROOT)/%,%,$@)'; \
$(MKDIR) -p $(@D); \
@@ -391,8 +492,25 @@
fi
# Find all files including directories
- JDK_DEMO_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/newdemo/%,$(JDK_IMAGE_DIR)/demo/%,\
- $(shell $(FIND) $(JDK_OUTPUTDIR)/newdemo ! -name "_the.*"))
+ JDK_DEMO_TARGETS := $(patsubst $(JDK_OUTPUTDIR)/demo/%,$(JDK_IMAGE_DIR)/demo/%,\
+ $(shell $(FIND) $(JDK_OUTPUTDIR)/demo ! \( -name "_the*" -o -name "javac_state" \) ))
+
+
+
+ # Param 1 is source file
+ define CreateOverlayDemoRule
+ $1_TARGET:=$$(subst $(JDK_OUTPUTDIR),$(JDK_OVERLAY_IMAGE_DIR),\
+ $$(dir $1)$(OPENJDK_TARGET_CPU_ISADIR)/$$(notdir $1))
+ $$($1_TARGET): $1
+ $(ECHO) Copying '$$(patsubst $(OUTPUT_ROOT)/%,%,$$@)'
+ $(MKDIR) -p $$(@D)
+ $(RM) $$@
+ $(CP) -f '$$<' '$$@'
+
+ JDK_OVERLAY_DEMO_TARGETS += $$($1_TARGET)
+ endef
+ JDK_OVERLAY_DEMO_SOURCES := $(shell $(FIND) $(JDK_OUTPUTDIR)/demo -name "*$(SHARED_LIBRARY_SUFFIX)")
+ $(foreach lib,$(JDK_OVERLAY_DEMO_SOURCES),$(eval $(call CreateOverlayDemoRule,$(lib))))
endif
@@ -471,50 +589,47 @@
JDK_DOC_TARGETS := $(addprefix $(JDK_IMAGE_DIR)/,$(JDK_DOC_FILES))
$(JRE_IMAGE_DIR)/%: $(JRE_DOC_LOCATION)/%
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(install-file)
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JDK_IMAGE_DIR)/jre/%: $(JRE_DOC_LOCATION)/%
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(install-file)
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JRE_IMAGE_DIR)/README.txt: $(JRE_DOC_LOCATION)/README
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(MKDIR) -p $(@D)
- $(CP) $< $@
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JDK_IMAGE_DIR)/jre/README.txt: $(JRE_DOC_LOCATION)/README
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(MKDIR) -p $(@D)
- $(CP) $< $@
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JDK_IMAGE_DIR)/%: $(JDK_DOC_LOCATION)/%
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(install-file)
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JDK_IMAGE_DIR)/demo/%: $(JDK_DOC_LOCATION)/%
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(install-file)
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
$(JDK_IMAGE_DIR)/sample/%: $(JDK_DOC_LOCATION)/%
- $(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(install-file)
- $(CHMOD) 444 $(@)
+ $(process-doc-file)
JRE_INFO_FILE := $(JRE_IMAGE_DIR)/release
JDK_INFO_FILE := $(JDK_IMAGE_DIR)/release
+JRE_OVERLAY_INFO_FILE := $(JRE_OVERLAY_IMAGE_DIR)/release
+JDK_OVERLAY_INFO_FILE := $(JDK_OVERLAY_IMAGE_DIR)/release
+
# Common way to emit a line into the release or info file
define info-file-item # name value
$(PRINTF) '%s="%s"\n' $1 $2 >> $@
endef
+define create-info-file
+ $(MKDIR) -p $(@D)
+ $(RM) $@
+ $(call info-file-item, "JAVA_VERSION", "$(JDK_VERSION)")
+ $(call info-file-item, "OS_NAME", "$(REQUIRED_OS_NAME)")
+ $(call info-file-item, "OS_VERSION", "$(REQUIRED_OS_VERSION)")
+ $(call info-file-item, "OS_ARCH", "$(OPENJDK_TARGET_CPU_LEGACY)")
+ $(call info-file-item, "SOURCE", "$(ALL_SOURCE_TIPS)")
+endef
+
ALL_SOURCE_TIPS = $(shell \
if [ -f $(OUTPUT_ROOT)/source_tips ] ; then \
$(CAT) $(OUTPUT_ROOT)/source_tips ; \
@@ -522,23 +637,19 @@
$(JRE_INFO_FILE): $(OUTPUT_ROOT)/spec.gmk $(OUTPUT_ROOT)/source_tips
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(MKDIR) -p $(@D)
- $(RM) $@
- $(call info-file-item, "JAVA_VERSION", "$(JDK_VERSION)")
- $(call info-file-item, "OS_NAME", "$(REQUIRED_OS_NAME)")
- $(call info-file-item, "OS_VERSION", "$(REQUIRED_OS_VERSION)")
- $(call info-file-item, "OS_ARCH", "$(ARCH)")
- $(call info-file-item, "SOURCE", "$(ALL_SOURCE_TIPS)")
+ $(call create-info-file)
$(JDK_INFO_FILE): $(OUTPUT_ROOT)/spec.gmk $(OUTPUT_ROOT)/source_tips
$(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
- $(MKDIR) -p $(@D)
- $(RM) $@
- $(call info-file-item, "JAVA_VERSION", "$(JDK_VERSION)")
- $(call info-file-item, "OS_NAME", "$(REQUIRED_OS_NAME)")
- $(call info-file-item, "OS_VERSION", "$(REQUIRED_OS_VERSION)")
- $(call info-file-item, "OS_ARCH", "$(ARCH)")
- $(call info-file-item, "SOURCE", "$(ALL_SOURCE_TIPS)")
+ $(call create-info-file)
+
+$(JRE_OVERLAY_INFO_FILE): $(OUTPUT_ROOT)/spec.gmk $(OUTPUT_ROOT)/source_tips
+ $(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(call create-info-file)
+
+$(JDK_OVERLAY_INFO_FILE): $(OUTPUT_ROOT)/spec.gmk $(OUTPUT_ROOT)/source_tips
+ $(ECHO) Generating $(patsubst $(OUTPUT_ROOT)/%,%,$@)
+ $(call create-info-file)
$(JDK_IMAGE_DIR)/src.zip: $(IMAGES_OUTPUTDIR)/src.zip
$(ECHO) Copying $(patsubst $(OUTPUT_ROOT)/%,%,$@)
@@ -549,51 +660,75 @@
ifneq ($(POST_STRIP_CMD),)
ifeq ($(OPENJDK_TARGET_OS), windows)
- EXEC_LIST:=$(shell $(FIND) $(JDK_OUTPUTDIR)/bin -type f -name \*.exe \
+ EXEC_LIST_BIN:=$(shell $(FIND) $(JDK_OUTPUTDIR)/bin -type f -name \*.exe \
-o -name \*.dll | $(EGREP) -v -i "$(MSVCRNN_DLL)")
else
# Find all executables in JDK_OUTPUTDIR since they exist when this makefile is parsed
- EXEC_LIST:=$(shell $(FIND) $(JDK_OUTPUTDIR)/lib -type f -name \*$(SHARED_LIBRARY_SUFFIX) && \
- $(FILE) `$(FIND) $(JDK_OUTPUTDIR)/bin -type f -name \*$(EXE_SUFFIX)` \
+ EXEC_LIST_BIN:=$(shell $(FILE) `$(FIND) $(JDK_OUTPUTDIR)/bin -type f -name \*$(EXE_SUFFIX)` \
| $(EGREP) 'ELF' | $(CUT) -d':' -f1)
+ # On mac, the old build searches for static libraries for stripping instead of shared.
+ # Not clear if it's intentional.
+ ifneq ($(OPENJDK_TARGET_OS), macosx)
+ EXEC_LIST_LIB:=$(shell $(FIND) $(JDK_OUTPUTDIR)/lib -type f -name \*$(SHARED_LIBRARY_SUFFIX))
+ endif
endif
+
+ # Filter out the overlay specific bin files
+ EXEC_LIST:=$(filter-out $(OVERLAY_FILTER),$(EXEC_LIST_BIN)) $(EXEC_LIST_LIB)
+ EXEC_LIST_OVERLAY:=$(filter $(OVERLAY_FILTER),$(EXEC_LIST_BIN)) $(EXEC_LIST_LIB)
+
# Filter out non JRE files and convert to unique touch files to depend on
- JRE_EXEC_TOUCH_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%,$(IMAGES_OUTPUTDIR)/_strip_jre/%.stripped,\
- $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES) $(NOT_JRE_LIB_FILES)), $(EXEC_LIST)))
+ JRE_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%,$(IMAGES_OUTPUTDIR)/_strip_jre/%.stripped,\
+ $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES) $(NOT_JRE_LIB_FILES) $(JDKJRE_LIB_FILES)),\
+ $(EXEC_LIST)))
- JDK_JRE_EXEC_TOUCH_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%, \
+ JDKJRE_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%, \
$(IMAGES_OUTPUTDIR)/_strip_jdk/jre/%.stripped, \
$(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES) $(NOT_JRE_LIB_FILES)), $(EXEC_LIST)))
- JDK_BIN_EXEC_TOUCH_LIST := $(patsubst $(JDK_OUTPUTDIR)/%, \
+ JDK_BIN_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%, \
$(IMAGES_OUTPUTDIR)/_strip_jdk/%.stripped, \
$(filter-out $(JDK_OUTPUTDIR)/lib/%, $(EXEC_LIST)))
+ # Do the same for overlay image
+ JRE_OVERLAY_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%,$(IMAGES_OUTPUTDIR)/_strip_jre_overlay/%.stripped,\
+ $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES) $(NOT_JRE_LIB_FILES) $(JDKJRE_LIB_FILES)),\
+ $(EXEC_LIST_OVERLAY)))
+
+ JDKJRE_OVERLAY_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%, \
+ $(IMAGES_OUTPUTDIR)/_strip_jdk_overlay/jre/%.stripped, \
+ $(filter-out $(addprefix %,$(NOT_JRE_BIN_FILES) $(NOT_JRE_LIB_FILES)), $(EXEC_LIST_OVERLAY)))
+
+ JDK_OVERLAY_BIN_STRIP_LIST:=$(patsubst $(JDK_OUTPUTDIR)/%, \
+ $(IMAGES_OUTPUTDIR)/_strip_jdk_overlay/%.stripped, \
+ $(filter-out $(JDK_OUTPUTDIR)/lib/%, $(EXEC_LIST_OVERLAY)))
+
+ define mcs-file
+ $(if $(POST_MCS_CMD),$(POST_MCS_CMD) $<)
+ endef
+
+ define strip-file
+ $(ECHO) Stripping $(patsubst $(OUTPUT_ROOT)/%,%,$<)
+ $(CHMOD) u+w $<
+ $(POST_STRIP_CMD) $<
+ $(call mcs-file)
+ $(CHMOD) go-w $<
+ $(MKDIR) -p $(@D)
+ $(TOUCH) $@
+ endef
+
# Setup a rule for stripping files based on touch files
$(IMAGES_OUTPUTDIR)/_strip_jre/%.stripped: $(JRE_IMAGE_DIR)/%
- $(ECHO) Stripping $(patsubst $(OUTPUT_ROOT)/%,%,$<)
- $(CHMOD) u+w $<
- $(POST_STRIP_CMD) $<
- $(CHMOD) go-w $<
- $(MKDIR) -p $(@D)
- $(TOUCH) $@
+ $(call strip-file)
+
+ $(IMAGES_OUTPUTDIR)/_strip_jdk/%.stripped: $(JDK_IMAGE_DIR)/%
+ $(call strip-file)
- $(IMAGES_OUTPUTDIR)/_strip_jdk/bin/%.stripped: $(JDK_IMAGE_DIR)/bin/%
- $(ECHO) Stripping $(patsubst $(OUTPUT_ROOT)/%,%,$<)
- $(CHMOD) u+w $<
- $(POST_STRIP_CMD) $<
- $(CHMOD) go-w $<
- $(MKDIR) -p $(@D)
- $(TOUCH) $@
+ $(IMAGES_OUTPUTDIR)/_strip_jre_overlay/%.stripped: $(JRE_OVERLAY_IMAGE_DIR)/%
+ $(call strip-file)
- # Setup a rule for stripping files based on touch files
- $(IMAGES_OUTPUTDIR)/_strip_jdk/jre/%.stripped: $(JDK_IMAGE_DIR)/jre/%
- $(ECHO) Stripping $(patsubst $(OUTPUT_ROOT)/%,%,$<)
- $(CHMOD) u+w $<
- $(POST_STRIP_CMD) $<
- $(CHMOD) go-w $<
- $(MKDIR) -p $(@D)
- $(TOUCH) $@
+ $(IMAGES_OUTPUTDIR)/_strip_jdk_overlay/%.stripped: $(JDK_OVERLAY_IMAGE_DIR)/%
+ $(call strip-file)
endif
@@ -602,7 +737,7 @@
jre-image: $(JRE_BIN_TARGETS) $(JRE_LIB_TARGETS) $(JRE_IMAGE_DIR)/lib/applet \
$(JRE_IMAGE_DIR)/lib/meta-index $(JRE_IMAGE_DIR)/lib/ext/meta-index \
- $(JRE_MAN_PAGE_LIST) $(JRE_DOC_TARGETS) $(JRE_INFO_FILE) $(JRE_EXEC_TOUCH_LIST)
+ $(JRE_MAN_PAGE_LIST) $(JRE_DOC_TARGETS) $(JRE_INFO_FILE) $(JRE_STRIP_LIST)
jdk-image: $(JDK_BIN_TARGETS) $(JDKJRE_BIN_TARGETS) \
$(JDK_LIB_TARGETS) $(JDKJRE_LIB_TARGETS) \
@@ -612,9 +747,17 @@
$(JDK_MAN_PAGE_LIST) $(JDK_SAMPLE_TARGETS) \
$(JDK_DB_TARGETS) $(JDK_INCLUDE_TARGETS) \
$(JDKJRE_DOC_TARGETS) $(JDK_DOC_TARGETS) \
- $(JDK_INFO_FILE) $(JDK_JRE_EXEC_TOUCH_LIST) $(JDK_BIN_EXEC_TOUCH_LIST) \
+ $(JDK_INFO_FILE) $(JDKJRE_STRIP_LIST) $(JDK_BIN_STRIP_LIST) \
$(JDK_IMAGE_DIR)/src.zip
+jre-overlay-image: $(JRE_OVERLAY_BIN_TARGETS) $(JRE_OVERLAY_LIB_TARGETS) \
+ $(JRE_OVERLAY_INFO_FILE) $(JRE_OVERLAY_STRIP_LIST)
+
+jdk-overlay-image: $(JDK_OVERLAY_BIN_TARGETS) $(JDKJRE_OVERLAY_BIN_TARGETS) \
+ $(JDK_OVERLAY_LIB_TARGETS) $(JDKJRE_OVERLAY_LIB_TARGETS) \
+ $(JDK_OVERLAY_DEMO_TARGETS) $(JDK_OVERLAY_INFO_FILE) \
+ $(JDKJRE_OVERLAY_STRIP_LIST) $(JDK_OVERLAY_BIN_STRIP_LIST)
+
################################################################################
.PHONY: default images jre-image jdk-image
--- a/jdk/makefiles/Import.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/Import.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -41,12 +41,8 @@
# Put the libraries here. Different locations for different target apis.
ifeq ($(OPENJDK_TARGET_OS_API),posix)
- ifneq ($(OPENJDK_TARGET_OS),macosx)
- INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib/$(LIBARCH)
- else
- INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib
- endif
- HOTSPOT_LIB_DIR:=$(HOTSPOT_DIST)/jre/lib/$(LIBARCH)
+ INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/lib$(OPENJDK_TARGET_CPU_LIBDIR)
+ HOTSPOT_LIB_DIR:=$(HOTSPOT_DIST)/jre/lib$(OPENJDK_TARGET_CPU_LIBDIR)
else
INSTALL_LIBRARIES_HERE:=$(JDK_OUTPUTDIR)/bin
HOTSPOT_LIB_DIR:=$(HOTSPOT_DIST)/jre/bin
@@ -65,6 +61,7 @@
$(JDK_OUTPUTDIR)/classes/_the.$1.classes.imported : $$($1_DIST)/lib/classes.jar $$($1_CLASSES_DEP)
$(ECHO) Importing $1 classes.jar
$(MKDIR) -p $$(@D)
+ $(RM) $$@ $$@.tmp
($(CD) $$(@D) && $(JAR) xvf $$< > $$@.tmp)
$(MV) $$@.tmp $$@
endef
@@ -76,6 +73,7 @@
$(JDK_OUTPUTDIR)/impsrc/_the.$1.src.imported : $$($1_DIST)/lib/src.zip $$($1_SOURCES_DEP)
$(ECHO) Importing $1 src.zip
$(MKDIR) -p $$(@D)
+ $(RM) $$@ $$@.tmp
($(CD) $$(@D) && $(JAR) xvf $$< > $$@.tmp)
$(MV) $$@.tmp $$@
endef
@@ -87,6 +85,7 @@
$(JDK_OUTPUTDIR)/_the.$1.binaries.imported : $$($1_DIST)/lib/bin.zip $$($1_BINARIES_DEP)
$(ECHO) Importing $1 bin.zip
$(MKDIR) -p $$(@D)
+ $(RM) $$@ $$@.tmp
($(CD) $$(@D) && $(JAR) xvf $$< > $$@.tmp)
$(MV) $$@.tmp $$@
endef
@@ -103,23 +102,26 @@
ifeq ($(OPENJDK_TARGET_OS),solaris)
define do-install-file
- $(MKDIR) -p $$(@D)
+ $(MKDIR) -p '$$(@D)'
+ $(RM) '$$@'
$(CP) -r -P '$$<' '$$(@D)'
endef
else ifeq ($(OPENJDK_TARGET_OS),macosx)
define do-install-file
- $(MKDIR) -p $$(@D)
+ $(MKDIR) -p '$$(@D)'
+ $(RM) '$$@'
$(CP) -pRP '$$<' '$$@'
endef
else
define do-install-file
- $(MKDIR) -p $$(@D)
+ $(MKDIR) -p '$$(@D)'
+ $(RM) '$$@'
$(CP) -P '$$<' '$$@'
endef
endif
define CopyDir
- $1_SRC_FILES := $(shell $(FIND) $2 -type f)
+ $1_SRC_FILES := $(shell $(FIND) $2 -type f -a ! -name "wb.jar")
$1_DST_FILES := $$(patsubst $2/%,$3/%,$$($1_SRC_FILES))
IMPORT_TARGET_FILES += $$($1_DST_FILES)
$3/% : $2/%
@@ -136,8 +138,8 @@
$(eval $(call CopyDir,HOTSPOT0, $(HOTSPOT_LIB_DIR), $(INSTALL_LIBRARIES_HERE)))
$(eval $(call CopyDir,HOTSPOT1, $(HOTSPOT_DIST)/lib, $(JDK_OUTPUTDIR)/lib))
-JSIG_DEBUGINFO := $(wildcard $(HOTSPOT_DIST)/jre/lib/$(LIBARCH)/libjsig.debuginfo) \
- $(wildcard $(HOTSPOT_DIST)/jre/lib/$(LIBARCH)/libjsig.diz)
+JSIG_DEBUGINFO := $(strip $(wildcard $(HOTSPOT_DIST)/jre/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libjsig.debuginfo) \
+ $(wildcard $(HOTSPOT_DIST)/jre/lib$(OPENJDK_TARGET_CPU_LIBDIR)/libjsig.diz) )
ifneq ($(OPENJDK_TARGET_OS), windows)
ifeq ($(JVM_VARIANT_SERVER), true)
@@ -155,64 +157,75 @@
endif
$(INSTALL_LIBRARIES_HERE)/server/%$(SHARED_LIBRARY_SUFFIX) : $(INSTALL_LIBRARIES_HERE)/%$(SHARED_LIBRARY_SUFFIX)
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
$(LN) -s ../$(@F) $@
$(INSTALL_LIBRARIES_HERE)/server/%.debuginfo : $(INSTALL_LIBRARIES_HERE)/%.debuginfo
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
$(LN) -s ../$(@F) $@
$(INSTALL_LIBRARIES_HERE)/server/%.diz : $(INSTALL_LIBRARIES_HERE)/%.diz
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
ifeq (REALLY_WEIRD,1)
$(LN) -s ../$(@F) $@
else
#
# TODO: Check if this is what they really want...a zip containing a symlink
#
- $(RM) -f $(basename $@).debuginfo
+ $(RM) $@.tmp $(basename $@).debuginfo
$(LN) -s ../$(basename $(@F)).debuginfo $(basename $@).debuginfo
- $(ZIP) -q -y $@ $(basename $@).debuginfo
- $(RM) -f $(basename $@).debuginfo
+ $(ZIP) -q -y $@.tmp $(basename $@).debuginfo
+ $(RM) $(basename $@).debuginfo
+ $(MV) $@.tmp $@
endif
$(INSTALL_LIBRARIES_HERE)/client/%$(SHARED_LIBRARY_SUFFIX) : $(INSTALL_LIBRARIES_HERE)/%$(SHARED_LIBRARY_SUFFIX)
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
$(LN) -s ../$(@F) $@
$(INSTALL_LIBRARIES_HERE)/client/%.debuginfo : $(INSTALL_LIBRARIES_HERE)/%.debuginfo
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
$(LN) -s ../$(@F) $@
$(INSTALL_LIBRARIES_HERE)/client/%.diz : $(INSTALL_LIBRARIES_HERE)/%.diz
- $(RM) -f $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
ifeq (REALLY_WEIRD,1)
$(LN) -s ../$(@F) $@
else
#
# TODO: Check if this is what they really want...a zip containing a symlink
#
- $(RM) -f $(basename $@).debuginfo
+ $(RM) $@.tmp $(basename $@).debuginfo
$(LN) -s ../$(basename $(@F)).debuginfo $(basename $@).debuginfo
- $(ZIP) -q -y $@ $(basename $@).debuginfo
- $(RM) -f $(basename $@).debuginfo
+ $(ZIP) -q -y $@.tmp $(basename $@).debuginfo
+ $(RM) $(basename $@).debuginfo
+ $(MV) $@.tmp $@
endif
#######
ifeq ($(OPENJDK_TARGET_OS),solaris)
define install-file
- $(MKDIR) -p $(@D)
+ $(MKDIR) -p '$(@D)'
+ $(RM) '$@'
$(CP) -r -P '$<' '$(@D)'
endef
else ifeq ($(OPENJDK_TARGET_OS),macosx)
define install-file
- $(MKDIR) -p $(@D)
+ $(MKDIR) -p '$(@D)'
+ $(RM) '$@'
$(CP) -pRP '$<' '$@'
endef
else
define install-file
- $(MKDIR) -p $(@D)
+ $(MKDIR) -p '$(@D)'
+ $(RM) '$@'
$(CP) -P '$<' '$@'
endef
endif
--- a/jdk/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -26,6 +26,11 @@
# This must be the first rule
default: all
+# Inclusion of this pseudo-target will cause make to execute this file
+# serially, regardless of -j. Recursively called makefiles will not be
+# affected, however. This is required for correct dependency management.
+.NOTPARALLEL:
+
include $(SPEC)
include MakeBase.gmk
include JavaCompilation.gmk
@@ -37,39 +42,72 @@
# Setup the build tools.
include Tools.gmk
-all: $(BUILD_TOOLS)
+import: $(BUILD_TOOLS) import-only
+import-only:
# Import (corba jaxp jaxws langtools hotspot)
+$(MAKE) -f Import.gmk
-#
+
+gensrc: import gensrc-only
+gensrc-only:
+$(MAKE) -f GenerateJavaSources.gmk
# Ok, now gensrc is fully populated.
+
+gendata: gensrc gendata-only
+gendata-only:
+$(MAKE) -f GenerateData.gmk
+
+classes: gendata classes-only
+classes-only:
+$(MAKE) -f CompileJavaClasses.gmk
# The classes are now built and
# any javah files have now been generated.
+
+libs: classes libs-only
+libs-only:
+$(MAKE) -f CompileNativeLibraries.gmk
+
+launchers: libs launchers-only
+launchers-only:
# Finally compile the launchers.
+$(MAKE) -f CompileLaunchers.gmk
+
+genclasses: launchers genclasses-only
+genclasses-only:
# Generate classes that have other sources. Needs
# to execute launchers.
+$(MAKE) -f GenerateClasses.gmk
+
+demos: genclasses demos-only
+demos-only:
# Now we have a complete jdk, which you can run.
# It is not yet wrapped up as an installed image.
# The demos are compiled against this jdk.
ifndef NO_DEMOS
+$(MAKE) -f CompileDemos.gmk
endif
+
+samples: demos samples-only
+samples-only:
# Now copy the sample sources into the jdk.
ifndef NO_SAMPLES
+$(MAKE) -f CopySamples.gmk
endif
+# The all target builds the JDK, but not the images
+all: import gensrc gendata classes libs launchers genclasses demos samples
+
+.PHONY: all images install overlay-images import-only gensrc-only gendata-only classes-only
+.PHONY: libs-only launchers-only genclasses-only demos-only samples-only
+
# Create the final jdk and jre images, to be wrapped up
# into packages, or installed.
images:
+$(MAKE) -f CreateJars.gmk
+$(MAKE) -f Images.gmk
+overlay-images:
+ +$(MAKE) -f CompileLaunchers.gmk OVERLAY_IMAGES=true
+ +$(MAKE) -f Images.gmk overlay-images
BINARIES:=$(shell if test -d $(IMAGES_OUTPUTDIR)/j2sdk-image/bin; then cd $(IMAGES_OUTPUTDIR)/j2sdk-image/bin && $(LS) ; fi)
INSTALLDIR:=openjdk-$(RELEASE)
@@ -84,5 +122,3 @@
$(CP) -rp $(IMAGES_OUTPUTDIR)/j2sdk-image/* $(INSTALL_PREFIX)/jvm/$(INSTALLDIR)
$(RM) $(addprefix $(INSTALL_PREFIX)/bin/,$(BINARIES))
$(foreach b,$(BINARIES),$(LN) -s $(INSTALL_PREFIX)/jvm/$(INSTALLDIR)/bin/$b $(INSTALL_PREFIX)/bin/$b &&) true
-
-.PHONY: all install images
--- a/jdk/makefiles/Setup.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/Setup.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -36,10 +36,8 @@
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
FLAGS:=-source 7 -target 7 -bootclasspath $(BOOT_RTJAR) $(DISABLE_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
# The generate new bytecode javac setup uses the new compiler to compile for the
# new jdk. This new bytecode might only be possible to run using the new jvm.
@@ -47,11 +45,9 @@
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
JAVAH:=$(JAVAH_JARS),\
- FLAGS:=-bootclasspath "$(JDK_OUTPUTDIR)/classes" -Xprefer:source -XDignore.symbol.file=true $(DISABLE_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ FLAGS:=-bootclasspath $(JDK_OUTPUTDIR)/classes -source 7 -target 7 -encoding ascii -XDignore.symbol.file=true $(DISABLE_WARNINGS),\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
# After the jdk is built, we want to build demos using only the recently
# generated jdk classes and nothing else, no jdk source, etc etc.
@@ -60,19 +56,6 @@
$(eval $(call SetupJavaCompiler,GENERATE_USINGJDKBYTECODE,\
JVM:=$(JAVA),\
JAVAC:=$(JAVAC_JARS),\
- FLAGS:= -Xbootclasspath:$(JDK_OUTPUTDIR)/classes $(DISABLE_WARNINGS),\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
-
-# A temporary solution to work around the fact that Matrix3D.java
-# exists in several applets. The javacserver does not like to be
-# fed the same class twice. Thus we compile one applet outside of the
-# javacserver.
-$(eval $(call SetupJavaCompiler,GENERATE_USINGJDKBYTECODE_NOSERV,\
- JVM:=$(JAVA),\
- JAVAC:=$(JAVAC_JARS),\
- FLAGS:= -Xbootclasspath:$(JDK_OUTPUTDIR)/classes $(DISABLE_WARNINGS),\
- MODE:=SINGLE_THREADED_BATCH,\
- USE_DEPS:=FALSE))
+ FLAGS:=-bootclasspath $(JDK_OUTPUTDIR)/classes $(DISABLE_WARNINGS),\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
--- a/jdk/makefiles/Tools.gmk Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/Tools.gmk Wed Jul 05 18:22:52 2017 +0200
@@ -134,8 +134,8 @@
$(eval $(call SetupNativeCompilation,ADD_GNU_DEBUGLINK,\
SRC:=$(JDK_TOPDIR)/make/tools/add_gnu_debuglink,\
LANG:=C,\
- CC:=$(HOST_CC),\
- LDEXE:=$(HOST_LD),\
+ CC:=$(BUILD_CC),\
+ LDEXE:=$(BUILD_LD),\
LDFLAGS:=-lelf,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/add_gnu_debuglink,\
OUTPUT_DIR:=$(JDK_OUTPUTDIR)/btbin,\
@@ -144,8 +144,8 @@
$(eval $(call SetupNativeCompilation,FIX_EMPTY_SEC_HDR_FLAGS,\
SRC:=$(JDK_TOPDIR)/make/tools/fix_empty_sec_hdr_flags,\
LANG:=C,\
- CC:=$(HOST_CC),\
- LDEXE:=$(HOST_LD),\
+ CC:=$(BUILD_CC),\
+ LDEXE:=$(BUILD_LD),\
LDFLAGS:=-lelf,\
OBJECT_DIR:=$(JDK_OUTPUTDIR)/objs/fix_empty_sec_hdr_flags,\
OUTPUT_DIR:=$(JDK_OUTPUTDIR)/btbin,\
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/launchers/mapfile-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,48 @@
+#
+# Copyright (c) 2004, 2011, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+#
+# Specify what global symbols we export. Note that we're not really
+# interested in declaring a version, simply scoping the file is sufficient.
+#
+
+SUNWprivate_1.1 {
+ global:
+ main; # Provides basic adb symbol offsets
+ environ; # Public symbols and required by Java run time
+ _environ;
+ __environ_lock;
+ ___Argv; # The following are private, but as they are
+ _start; # exported from ctr1/crtn, the clever hacker
+ _init; # might know about them. However note, that
+ _fini; # their use is strictly not supported.
+ _lib_version;
+# _mcount;
+ __fsr;
+ __fsr_init_value;
+ __longdouble_used;
+
+ local:
+ *;
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/launchers/mapfile-x86_64 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,39 @@
+#
+# Copyright (c) 2004, 2011, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+#
+# Specify what global symbols we export. Note that we're not really
+# interested in declaring a version, simply scoping the file is sufficient.
+#
+
+SUNWprivate_1.1 {
+ global:
+ main; # Provides basic adb symbol offsets
+ environ; # Public symbols and required by Java run time
+ _environ;
+ __environ_lock;
+
+ local:
+ *;
+};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libawt_headless/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,1 @@
+# Temporary file for headless
--- a/jdk/makefiles/mapfiles/libjava/mapfile-vers Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/mapfiles/libjava/mapfile-vers Wed Jul 05 18:22:52 2017 +0200
@@ -285,6 +285,8 @@
# Java_sun_misc_VM_unsuspendSomeThreads; threads.c
# Java_sun_misc_VM_unsuspendThreads; threads.c
+ Java_sun_util_locale_provider_HostLocaleProviderAdapterImpl_getPattern;
+
# Outcalls from libjvm done using dlsym().
VerifyClassCodes;
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libjava/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,109 @@
+data = R0x2000;
+text = LOAD ?RXO;
+# Test Null
+text: .text%_init;
+text: .text%init64IO: OUTPUTDIR/UnixFileSystem_md.o;
+text: .text%JNI_OnLoad;
+text: .text%Canonicalize;
+text: .text%canonicalize;
+text: .text%collapse: OUTPUTDIR/canonicalize_md.o;
+text: .text%Java_java_lang_Object_registerNatives;
+text: .text%Java_java_lang_System_registerNatives;
+text: .text%Java_java_lang_Thread_registerNatives;
+text: .text%Java_java_security_AccessController_getStackAccessControlContext;
+text: .text%Java_java_security_AccessController_getInheritedAccessControlContext;
+text: .text%Java_java_lang_ClassLoader_registerNatives;
+text: .text%Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2;
+text: .text%Java_java_lang_Class_registerNatives;
+text: .text%Java_java_lang_Class_getPrimitiveClass;
+text: .text%Java_java_lang_System_initProperties;
+text: .text%GetJavaProperties;
+text: .text%uname: OUTPUTDIR/java_props_md.o;
+text: .text%mapLookup: OUTPUTDIR/java_props_md.o;
+text: .text%setPathEnvironment: OUTPUTDIR/java_props_md.o;
+text: .text%JNU_NewStringPlatform;
+text: .text%JNU_CallStaticMethodByName;
+text: .text%NewStringPlatform;
+text: .text%Java_java_io_FileInputStream_initIDs;
+text: .text%Java_java_io_FileDescriptor_initIDs;
+text: .text%Java_java_io_FileOutputStream_initIDs;
+text: .text%Java_java_lang_System_setIn0;
+text: .text%Java_sun_reflect_Reflection_getCallerClass;
+text: .text%Java_java_lang_Class_forName0;
+text: .text%Java_java_lang_String_intern;
+text: .text%Java_sun_reflect_NativeConstructorAccessorImpl_newInstance0;
+text: .text%Java_java_lang_Throwable_fillInStackTrace;
+text: .text%Java_java_lang_System_setOut0;
+text: .text%Java_java_lang_System_setErr0;
+text: .text%Java_java_lang_Compiler_registerNatives;
+text: .text%Java_java_io_FileSystem_getFileSystem;
+text: .text%JNU_NewObjectByName;
+text: .text%Java_java_io_UnixFileSystem_initIDs;
+text: .text%Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedExceptionAction_2;
+text: .text%Java_java_io_UnixFileSystem_list;
+text: .text%JNU_GetStringPlatformChars;
+text: .text%JNU_ReleaseStringPlatformChars;
+text: .text%JNU_ClassString;
+text: .text%JNU_CopyObjectArray;
+text: .text%Java_java_io_UnixFileSystem_canonicalize;
+text: .text%Java_java_io_UnixFileSystem_getBooleanAttributes0;
+text: .text%Java_java_lang_ClassLoader_findLoadedClass;
+text: .text%Java_java_lang_ClassLoader_findBootstrapClass;
+text: .text%Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedExceptionAction_2Ljava_security_AccessControlContext_2;
+text: .text%Java_java_lang_System_mapLibraryName;
+text: .text%cpchars: OUTPUTDIR/System.o;
+text: .text%Java_java_lang_ClassLoader_00024NativeLibrary_load;
+text: .text%Java_java_lang_ClassLoader_00024NativeLibrary_find;
+text: .text%Java_java_lang_Float_floatToIntBits;
+text: .text%Java_java_lang_Double_doubleToLongBits;
+text: .text%Java_java_io_FileInputStream_open;
+text: .text%fileOpen;
+text: .text%Java_java_io_UnixFileSystem_getLength;
+text: .text%Java_java_io_FileInputStream_readBytes;
+text: .text%readBytes;
+text: .text%Java_java_io_FileInputStream_close0;
+text: .text%Java_java_lang_Object_getClass;
+text: .text%Java_java_lang_ClassLoader_defineClass0;
+text: .text%VerifyClassCodes;
+# Test Exit
+text: .text%Java_java_lang_Shutdown_halt;
+# Test Hello
+text: .text%Java_java_io_FileOutputStream_writeBytes;
+text: .text%writeBytes;
+# Test Sleep
+# Test IntToString
+# Test LoadToolkit
+text: .text%Java_java_util_ResourceBundle_getClassContext;
+text: .text%Java_java_security_AccessController_doPrivileged__Ljava_security_PrivilegedAction_2Ljava_security_AccessControlContext_2;
+text: .text%JNU_GetEnv;
+text: .text%Java_java_io_UnixFileSystem_checkAccess;
+text: .text%Java_sun_reflect_NativeMethodAccessorImpl_invoke0;
+text: .text%Java_java_lang_ref_Finalizer_invokeFinalizeMethod;
+text: .text%Java_java_io_FileInputStream_available;
+text: .text%Java_java_lang_reflect_Array_newArray;
+text: .text%Java_java_lang_Throwable_getStackTraceDepth;
+text: .text%Java_java_lang_Throwable_getStackTraceElement;
+text: .text%Java_java_lang_System_identityHashCode;
+text: .text%Java_sun_misc_Signal_findSignal;
+text: .text%Java_sun_misc_Signal_handle0;
+text: .text%JNU_NotifyAll;
+# Test LoadFrame
+text: .text%JNU_CallMethodByName;
+text: .text%JNU_CallMethodByNameV;
+text: .text%Java_java_util_logging_FileHandler_lockFile;
+text: .text%Java_java_io_FileOutputStream_open;
+text: .text%Java_java_io_UnixFileSystem_createDirectory;
+text: .text%Java_java_io_UnixFileSystem_getLastModifiedTime;
+text: .text%Java_java_util_prefs_FileSystemPreferences_lockFile0;
+text: .text%Java_java_io_UnixFileSystem_setLastModifiedTime;
+text: .text%Java_java_util_prefs_FileSystemPreferences_unlockFile0;
+text: .text%Java_java_io_FileOutputStream_close0;
+text: .text%Java_java_util_logging_FileHandler_unlockFile;
+# Test LoadJFrame
+text: .text%Java_java_lang_Class_isAssignableFrom;
+text: .text%Java_java_lang_Class_isInstance;
+# Test JHello
+# SwingSet
+text: .text%Java_java_util_TimeZone_getSystemTimeZoneID;
+text: .text%findJavaTZ_md;
+text: .text%Java_java_lang_StrictMath_log;
--- a/jdk/makefiles/mapfiles/libjli/mapfile-vers Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/mapfiles/libjli/mapfile-vers Wed Jul 05 18:22:52 2017 +0200
@@ -34,6 +34,8 @@
JLI_ReportErrorMessageSys;
JLI_ReportMessage;
JLI_ReportExceptionDescription;
+ JLI_GetStdArgs;
+ JLI_GetStdArgc;
local:
*;
};
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libjpeg/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,119 @@
+data = R0x2000;
+text = LOAD ?RXO;
+# Test Null
+# Test Exit
+# Test Hello
+# Test Sleep
+# Test IntToString
+# Test LoadToolkit
+# Test LoadFrame
+# Test LoadJFrame
+# Test JHello
+# SwingSet
+text: .text%JNI_OnLoad;
+text: .text%Java_sun_awt_image_JPEGImageDecoder_initIDs;
+text: .text%Java_sun_awt_image_JPEGImageDecoder_readImage;
+text: .text%jStdError;
+text: .text%jCreaDecompress;
+text: .text%jIMemMgr;
+text: .text%jMemInit;
+text: .text%jGetSmall;
+text: .text%jIMReader;
+text: .text%alloc_small: OUTPUTDIR/jmemmgr.o;
+text: .text%reset_marker_reader: OUTPUTDIR/jdmarker.o;
+text: .text%jIInCtlr;
+# text: .text%GET_ARRAYS: OUTPUTDIR/jpegdecoder.o;
+text: .text%jReadHeader;
+text: .text%jConsumeInput;
+text: .text%reset_input_controller: OUTPUTDIR/jdinput.o;
+text: .text%reset_error_mgr: OUTPUTDIR/jerror.o;
+text: .text%sun_jpeg_init_source;
+text: .text%consume_markers: OUTPUTDIR/jdinput.o;
+text: .text%read_markers: OUTPUTDIR/jdmarker.o;
+# text: .text%first_marker: OUTPUTDIR/jdmarker.o;
+text: .text%sun_jpeg_fill_input_buffer;
+# text: .text%RELEASE_ARRAYS: OUTPUTDIR/jpegdecoder.o;
+# text: .text%get_soi: OUTPUTDIR/jdmarker.o;
+text: .text%emit_message: OUTPUTDIR/jerror.o;
+# text: .text%next_marker: OUTPUTDIR/jdmarker.o;
+text: .text%get_interesting_appn: OUTPUTDIR/jdmarker.o;
+# text: .text%examine_app0: OUTPUTDIR/jdmarker.o;
+text: .text%skip_variable: OUTPUTDIR/jdmarker.o;
+text: .text%sun_jpeg_skip_input_data;
+# text: .text%examine_app14: OUTPUTDIR/jdmarker.o;
+text: .text%get_dqt: OUTPUTDIR/jdmarker.o;
+text: .text%jAlcQTable;
+text: .text%get_sof: OUTPUTDIR/jdmarker.o;
+# text: .text%get_dri: OUTPUTDIR/jdmarker.o;
+text: .text%get_dht: OUTPUTDIR/jdmarker.o;
+text: .text%jAlcHTable;
+text: .text%get_sos: OUTPUTDIR/jdmarker.o;
+# text: .text%initial_setup: OUTPUTDIR/jdinput.o;
+text: .text%jDivRound;
+# text: .text%default_decompress_parms: OUTPUTDIR/jdapimin.o;
+text: .text%jHasMultScn;
+text: .text%jStrtDecompress;
+text: .text%jIDMaster;
+# text: .text%master_selection: OUTPUTDIR/jdmaster.o;
+text: .text%jCalcDimensions;
+# text: .text%use_merged_upsample: OUTPUTDIR/jdmaster.o;
+# text: .text%prepare_range_limit_table: OUTPUTDIR/jdmaster.o;
+text: .text%jIDColor;
+# text: .text%build_ycc_rgb_table: OUTPUTDIR/jdcolor.o;
+text: .text%jIUpsampler;
+text: .text%jRound;
+text: .text%alloc_sarray: OUTPUTDIR/jmemmgr.o;
+text: .text%alloc_large: OUTPUTDIR/jmemmgr.o;
+text: .text%jGetLarge;
+text: .text%jIDPostC;
+text: .text%jIIDCT;
+text: .text%jIHDecoder;
+text: .text%jIDCoefC;
+text: .text%jIDMainC;
+# text: .text%alloc_funny_pointers: OUTPUTDIR/jdmainct.o;
+text: .text%realize_virt_arrays: OUTPUTDIR/jmemmgr.o;
+text: .text%start_input_pass: OUTPUTDIR/jdinput.o;
+# text: .text%per_scan_setup: OUTPUTDIR/jdinput.o;
+# text: .text%latch_quant_tables: OUTPUTDIR/jdinput.o;
+text: .text%start_pass_huff_decoder: OUTPUTDIR/jdhuff.o;
+text: .text%jMkDDerived;
+text: .text%start_input_pass: OUTPUTDIR/jdcoefct.o;
+# text: .text%start_iMCU_row: OUTPUTDIR/jdcoefct.o;
+# text: .text%output_pass_setup: OUTPUTDIR/jdapistd.o;
+text: .text%prepare_for_output_pass: OUTPUTDIR/jdmaster.o;
+text: .text%start_pass: OUTPUTDIR/jddctmgr.o;
+text: .text%start_output_pass: OUTPUTDIR/jdcoefct.o;
+text: .text%start_pass_dcolor: OUTPUTDIR/jdcolor.o;
+text: .text%start_pass_upsample: OUTPUTDIR/jdsample.o;
+text: .text%start_pass_dpost: OUTPUTDIR/jdpostct.o;
+text: .text%start_pass_main: OUTPUTDIR/jdmainct.o;
+# text: .text%make_funny_pointers: OUTPUTDIR/jdmainct.o;
+text: .text%jReadScanlines;
+text: .text%process_data_context_main: OUTPUTDIR/jdmainct.o;
+text: .text%decompress_onepass: OUTPUTDIR/jdcoefct.o;
+text: .text%jZeroFar;
+text: .text%decode_mcu: OUTPUTDIR/jdhuff.o;
+text: .text%jFilBitBuf;
+text: .text%jHufDecode;
+text: .text%jRDislow;
+text: .text%sep_upsample: OUTPUTDIR/jdsample.o;
+text: .text%fullsize_upsample: OUTPUTDIR/jdsample.o;
+text: .text%h2v2_fancy_upsample: OUTPUTDIR/jdsample.o;
+text: .text%ycc_rgb_convert: OUTPUTDIR/jdcolor.o;
+# text: .text%set_wraparound_pointers: OUTPUTDIR/jdmainct.o;
+# text: .text%process_restart: OUTPUTDIR/jdhuff.o;
+text: .text%read_restart_marker: OUTPUTDIR/jdmarker.o;
+text: .text%finish_input_pass: OUTPUTDIR/jdinput.o;
+# text: .text%set_bottom_pointers: OUTPUTDIR/jdmainct.o;
+text: .text%jFinDecompress;
+text: .text%finish_output_pass: OUTPUTDIR/jdmaster.o;
+text: .text%sun_jpeg_term_source;
+text: .text%jAbort;
+text: .text%free_pool: OUTPUTDIR/jmemmgr.o;
+text: .text%jFreeLarge;
+text: .text%jFreeSmall;
+text: .text%jDestDecompress;
+text: .text%jDestroy;
+text: .text%self_destruct: OUTPUTDIR/jmemmgr.o;
+text: .text%jMemTerm;
+text: .text%process_data_simple_main: OUTPUTDIR/jdmainct.o;
--- a/jdk/makefiles/mapfiles/libnio/mapfile-linux Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/mapfiles/libnio/mapfile-linux Wed Jul 05 18:22:52 2017 +0200
@@ -143,6 +143,7 @@
Java_sun_nio_fs_LinuxNativeDispatcher_fsetxattr0;
Java_sun_nio_fs_LinuxNativeDispatcher_fremovexattr0;
Java_sun_nio_fs_LinuxNativeDispatcher_setmntent0;
+ Java_sun_nio_fs_LinuxNativeDispatcher_getmntent;
Java_sun_nio_fs_LinuxNativeDispatcher_endmntent;
Java_sun_nio_fs_UnixNativeDispatcher_init;
Java_sun_nio_fs_UnixNativeDispatcher_getcwd;
@@ -189,7 +190,6 @@
Java_sun_nio_fs_UnixNativeDispatcher_getgrgid;
Java_sun_nio_fs_UnixNativeDispatcher_getpwnam0;
Java_sun_nio_fs_UnixNativeDispatcher_getgrnam0;
- Java_sun_nio_fs_UnixNativeDispatcher_getextmntent;
Java_sun_nio_fs_UnixCopyFile_transfer;
handleSocketError;
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libnio/mapfile-macosx Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,174 @@
+#
+# Copyright (c) 2001, 2011, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+SUNWprivate_1.1 {
+ global:
+ Java_java_nio_MappedByteBuffer_force0;
+ Java_java_nio_MappedByteBuffer_isLoaded0;
+ Java_java_nio_MappedByteBuffer_load0;
+ Java_sun_nio_ch_DatagramChannelImpl_disconnect0;
+ Java_sun_nio_ch_DatagramChannelImpl_initIDs;
+ Java_sun_nio_ch_DatagramChannelImpl_receive0;
+ Java_sun_nio_ch_DatagramChannelImpl_send0;
+ Java_sun_nio_ch_DatagramDispatcher_read0;
+ Java_sun_nio_ch_DatagramDispatcher_readv0;
+ Java_sun_nio_ch_DatagramDispatcher_write0;
+ Java_sun_nio_ch_DatagramDispatcher_writev0;
+ Java_sun_nio_ch_FileChannelImpl_close0;
+ Java_sun_nio_ch_FileChannelImpl_initIDs;
+ Java_sun_nio_ch_FileChannelImpl_map0;
+ Java_sun_nio_ch_FileChannelImpl_position0;
+ Java_sun_nio_ch_FileChannelImpl_transferTo0;
+ Java_sun_nio_ch_FileChannelImpl_unmap0;
+ Java_sun_nio_ch_FileDispatcherImpl_close0;
+ Java_sun_nio_ch_FileDispatcherImpl_closeIntFD;
+ Java_sun_nio_ch_FileDispatcherImpl_force0;
+ Java_sun_nio_ch_FileDispatcherImpl_init;
+ Java_sun_nio_ch_FileDispatcherImpl_lock0;
+ Java_sun_nio_ch_FileDispatcherImpl_preClose0;
+ Java_sun_nio_ch_FileDispatcherImpl_pread0;
+ Java_sun_nio_ch_FileDispatcherImpl_pwrite0;
+ Java_sun_nio_ch_FileDispatcherImpl_read0;
+ Java_sun_nio_ch_FileDispatcherImpl_readv0;
+ Java_sun_nio_ch_FileDispatcherImpl_release0;
+ Java_sun_nio_ch_FileDispatcherImpl_size0;
+ Java_sun_nio_ch_FileDispatcherImpl_truncate0;
+ Java_sun_nio_ch_FileDispatcherImpl_write0;
+ Java_sun_nio_ch_FileDispatcherImpl_writev0;
+ Java_sun_nio_ch_FileKey_init;
+ Java_sun_nio_ch_FileKey_initIDs;
+ Java_sun_nio_ch_InheritedChannel_close0;
+ Java_sun_nio_ch_InheritedChannel_dup;
+ Java_sun_nio_ch_InheritedChannel_dup2;
+ Java_sun_nio_ch_InheritedChannel_open0;
+ Java_sun_nio_ch_InheritedChannel_peerAddress0;
+ Java_sun_nio_ch_InheritedChannel_peerPort0;
+ Java_sun_nio_ch_InheritedChannel_soType0;
+ Java_sun_nio_ch_IOUtil_configureBlocking;
+ Java_sun_nio_ch_IOUtil_drain;
+ Java_sun_nio_ch_IOUtil_fdVal;
+ Java_sun_nio_ch_IOUtil_initIDs;
+ Java_sun_nio_ch_IOUtil_makePipe;
+ Java_sun_nio_ch_IOUtil_randomBytes;
+ Java_sun_nio_ch_IOUtil_setfdVal;
+ Java_sun_nio_ch_KQueue_kqueue;
+ Java_sun_nio_ch_KQueue_keventRegister;
+ Java_sun_nio_ch_KQueue_keventPoll;
+ Java_sun_nio_ch_KQueue_keventSize;
+ Java_sun_nio_ch_KQueue_identOffset;
+ Java_sun_nio_ch_KQueue_filterOffset;
+ Java_sun_nio_ch_KQueue_flagsOffset;
+ Java_sun_nio_ch_KQueuePort_socketpair;
+ Java_sun_nio_ch_KQueuePort_interrupt;
+ Java_sun_nio_ch_KQueuePort_drain1;
+ Java_sun_nio_ch_KQueuePort_close0;
+ Java_sun_nio_ch_NativeThread_current;
+ Java_sun_nio_ch_NativeThread_init;
+ Java_sun_nio_ch_NativeThread_signal;
+ Java_sun_nio_ch_Net_canIPv6SocketJoinIPv4Group0;
+ Java_sun_nio_ch_Net_canJoin6WithIPv4Group0;
+ Java_sun_nio_ch_Net_socket0;
+ Java_sun_nio_ch_Net_bind0;
+ Java_sun_nio_ch_Net_connect0;
+ Java_sun_nio_ch_Net_listen;
+ Java_sun_nio_ch_Net_localPort;
+ Java_sun_nio_ch_Net_localInetAddress;
+ Java_sun_nio_ch_Net_getIntOption0;
+ Java_sun_nio_ch_Net_setIntOption0;
+ Java_sun_nio_ch_Net_initIDs;
+ Java_sun_nio_ch_Net_isIPv6Available0;
+ Java_sun_nio_ch_Net_joinOrDrop4;
+ Java_sun_nio_ch_Net_blockOrUnblock4;
+ Java_sun_nio_ch_Net_joinOrDrop6;
+ Java_sun_nio_ch_Net_blockOrUnblock6;
+ Java_sun_nio_ch_Net_setInterface4;
+ Java_sun_nio_ch_Net_getInterface4;
+ Java_sun_nio_ch_Net_setInterface6;
+ Java_sun_nio_ch_Net_getInterface6;
+ Java_sun_nio_ch_Net_shutdown;
+ Java_sun_nio_ch_PollArrayWrapper_interrupt;
+ Java_sun_nio_ch_PollArrayWrapper_poll0;
+ Java_sun_nio_ch_ServerSocketChannelImpl_accept0;
+ Java_sun_nio_ch_ServerSocketChannelImpl_initIDs;
+ Java_sun_nio_ch_SocketChannelImpl_checkConnect;
+ Java_sun_nio_ch_SocketChannelImpl_sendOutOfBandData;
+ Java_sun_nio_ch_UnixAsynchronousServerSocketChannelImpl_accept0;
+ Java_sun_nio_ch_UnixAsynchronousServerSocketChannelImpl_initIDs;
+ Java_sun_nio_ch_UnixAsynchronousSocketChannelImpl_checkConnect;
+ Java_sun_nio_fs_BsdNativeDispatcher_initIDs;
+ Java_sun_nio_fs_BsdNativeDispatcher_getfsstat;
+ Java_sun_nio_fs_BsdNativeDispatcher_fsstatEntry;
+ Java_sun_nio_fs_BsdNativeDispatcher_endfsstat;
+ Java_sun_nio_fs_UnixNativeDispatcher_init;
+ Java_sun_nio_fs_UnixNativeDispatcher_getcwd;
+ Java_sun_nio_fs_UnixNativeDispatcher_strerror;
+ Java_sun_nio_fs_UnixNativeDispatcher_dup;
+ Java_sun_nio_fs_UnixNativeDispatcher_access0;
+ Java_sun_nio_fs_UnixNativeDispatcher_stat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_lstat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fstat;
+ Java_sun_nio_fs_UnixNativeDispatcher_fstatat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_chmod0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fchmod;
+ Java_sun_nio_fs_UnixNativeDispatcher_chown0;
+ Java_sun_nio_fs_UnixNativeDispatcher_lchown0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fchown;
+ Java_sun_nio_fs_UnixNativeDispatcher_utimes0;
+ Java_sun_nio_fs_UnixNativeDispatcher_futimes;
+ Java_sun_nio_fs_UnixNativeDispatcher_open0;
+ Java_sun_nio_fs_UnixNativeDispatcher_openat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_close;
+ Java_sun_nio_fs_UnixNativeDispatcher_read;
+ Java_sun_nio_fs_UnixNativeDispatcher_write;
+ Java_sun_nio_fs_UnixNativeDispatcher_fopen0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fclose;
+ Java_sun_nio_fs_UnixNativeDispatcher_opendir0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fdopendir;
+ Java_sun_nio_fs_UnixNativeDispatcher_readdir;
+ Java_sun_nio_fs_UnixNativeDispatcher_closedir;
+ Java_sun_nio_fs_UnixNativeDispatcher_link0;
+ Java_sun_nio_fs_UnixNativeDispatcher_unlink0;
+ Java_sun_nio_fs_UnixNativeDispatcher_unlinkat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_rename0;
+ Java_sun_nio_fs_UnixNativeDispatcher_renameat0;
+ Java_sun_nio_fs_UnixNativeDispatcher_mkdir0;
+ Java_sun_nio_fs_UnixNativeDispatcher_rmdir0;
+ Java_sun_nio_fs_UnixNativeDispatcher_symlink0;
+ Java_sun_nio_fs_UnixNativeDispatcher_readlink0;
+ Java_sun_nio_fs_UnixNativeDispatcher_realpath0;
+ Java_sun_nio_fs_UnixNativeDispatcher_statvfs0;
+ Java_sun_nio_fs_UnixNativeDispatcher_pathconf0;
+ Java_sun_nio_fs_UnixNativeDispatcher_fpathconf;
+ Java_sun_nio_fs_UnixNativeDispatcher_mknod0;
+ Java_sun_nio_fs_UnixNativeDispatcher_getpwuid;
+ Java_sun_nio_fs_UnixNativeDispatcher_getgrgid;
+ Java_sun_nio_fs_UnixNativeDispatcher_getpwnam0;
+ Java_sun_nio_fs_UnixNativeDispatcher_getgrnam0;
+ Java_sun_nio_fs_UnixCopyFile_transfer;
+ handleSocketError;
+
+ local:
+ *;
+};
--- a/jdk/makefiles/mapfiles/libnio/mapfile-solaris Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/mapfiles/libnio/mapfile-solaris Wed Jul 05 18:22:52 2017 +0200
@@ -169,10 +169,10 @@
Java_sun_nio_fs_UnixNativeDispatcher_getgrgid;
Java_sun_nio_fs_UnixNativeDispatcher_getpwnam0;
Java_sun_nio_fs_UnixNativeDispatcher_getgrnam0;
- Java_sun_nio_fs_UnixNativeDispatcher_getextmntent;
Java_sun_nio_fs_UnixCopyFile_transfer;
Java_sun_nio_fs_SolarisNativeDispatcher_init;
Java_sun_nio_fs_SolarisNativeDispatcher_facl;
+ Java_sun_nio_fs_SolarisNativeDispatcher_getextmntent;
Java_sun_nio_fs_SolarisWatchService_init;
Java_sun_nio_fs_SolarisWatchService_portCreate;
Java_sun_nio_fs_SolarisWatchService_portAssociate;
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libnio/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,17 @@
+data = R0x2000;
+text = LOAD ?RXO;
+# Test Null
+# Test Exit
+# Test Hello
+# Test Sleep
+# Test IntToString
+# Test LoadToolkit
+text: .text%Java_sun_nio_ch_FileChannelImpl_initIDs;
+text: .text%Java_sun_nio_ch_FileDispatcher_initIDs;
+text: .text%Java_sun_nio_ch_IOUtil_initIDs;
+text: .text%Java_sun_nio_ch_FileDispatcher_read0;
+text: .text%convertReturnVal;
+# Test LoadFrame
+# Test LoadJFrame
+# Test JHello
+# SwingSet
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libverify/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,40 @@
+data = R0x2000;
+text = LOAD ?RXO;
+# Test Null
+text: .text%VerifyFixClassname;
+text: .text%VerifyClassname;
+text: .text%skip_over_fieldname: OUTPUTDIR/check_format.o;
+text: .text%skip_over_field_signature: OUTPUTDIR/check_format.o;
+text: .text%VerifyClass;
+text: .text%make_class_info_from_name: OUTPUTDIR/check_code.o;
+text: .text%class_name_to_ID: OUTPUTDIR/check_code.o;
+text: .text%make_class_info: OUTPUTDIR/check_code.o;
+text: .text%free_block: OUTPUTDIR/check_code.o;
+text: .text%verify_method: OUTPUTDIR/check_code.o;
+text: .text%verify_opcode_operands: OUTPUTDIR/check_code.o;
+text: .text%initialize_dataflow: OUTPUTDIR/check_code.o;
+text: .text%signature_to_fieldtype: OUTPUTDIR/check_code.o;
+text: .text%check_register_values: OUTPUTDIR/check_code.o;
+text: .text%pop_stack: OUTPUTDIR/check_code.o;
+text: .text%update_registers: OUTPUTDIR/check_code.o;
+text: .text%push_stack: OUTPUTDIR/check_code.o;
+text: .text%merge_into_successors: OUTPUTDIR/check_code.o;
+text: .text%cp_index_to_class_fullinfo: OUTPUTDIR/check_code.o;
+text: .text%set_protected: OUTPUTDIR/check_code.o;
+text: .text%merge_into_one_successor: OUTPUTDIR/check_code.o;
+text: .text%merge_registers: OUTPUTDIR/check_code.o;
+# Test Exit
+# Test Hello
+text: .text%merge_fullinfo_types: OUTPUTDIR/check_code.o;
+text: .text%isAssignableTo: OUTPUTDIR/check_code.o;
+# Test Sleep
+text: .text%isLegalTarget: OUTPUTDIR/check_code.o;
+text: .text%verify_constant_pool_type: OUTPUTDIR/check_code.o;
+# Test IntToString
+# Test LoadToolkit
+# Test LoadFrame
+# Test LoadJFrame
+# Test JHello
+# SwingSet
+text: .text%copy_stack: OUTPUTDIR/check_code.o;
+text: .text%ntohl: OUTPUTDIR/check_code.o;
--- a/jdk/makefiles/mapfiles/libzip/mapfile-vers Wed Jul 05 18:22:17 2017 +0200
+++ b/jdk/makefiles/mapfiles/libzip/mapfile-vers Wed Jul 05 18:22:52 2017 +0200
@@ -37,16 +37,12 @@
Java_java_util_zip_Deflater_deflateBytes;
Java_java_util_zip_Deflater_end;
Java_java_util_zip_Deflater_getAdler;
- Java_java_util_zip_Deflater_getBytesRead;
- Java_java_util_zip_Deflater_getBytesWritten;
Java_java_util_zip_Deflater_init;
Java_java_util_zip_Deflater_initIDs;
Java_java_util_zip_Deflater_reset;
Java_java_util_zip_Deflater_setDictionary;
Java_java_util_zip_Inflater_end;
Java_java_util_zip_Inflater_getAdler;
- Java_java_util_zip_Inflater_getBytesRead;
- Java_java_util_zip_Inflater_getBytesWritten;
Java_java_util_zip_Inflater_inflateBytes;
Java_java_util_zip_Inflater_init;
Java_java_util_zip_Inflater_initIDs;
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/makefiles/mapfiles/libzip/reorder-x86 Wed Jul 05 18:22:52 2017 +0200
@@ -0,0 +1,49 @@
+data = R0x2000;
+text = LOAD ?RXO;
+# Test Null
+text: .text%ZIP_Open;
+text: .text%ZIP_Open_Generic;
+text: .text%InitializeZip;
+text: .text%allocZip;
+text: .text%readCEN: OUTPUTDIR/zip_util.o;
+text: .text%findEND: OUTPUTDIR/zip_util.o;
+text: .text%hash: OUTPUTDIR/zip_util.o;
+text: .text%isMetaName: OUTPUTDIR/zip_util.o;
+text: .text%addMetaName: OUTPUTDIR/zip_util.o;
+text: .text%ZIP_FindEntry;
+text: .text%ZIP_GetEntry;
+text: .text%ZIP_Lock;
+text: .text%readLOC: OUTPUTDIR/zip_util.o;
+text: .text%ZIP_Unlock;
+text: .text%ZIP_FreeEntry;
+text: .text%Java_java_util_zip_ZipFile_initIDs;
+text: .text%Java_java_util_zip_ZipFile_open;
+text: .text%Java_java_util_zip_ZipFile_getTotal;
+text: .text%Java_java_util_zip_ZipFile_getEntry;
+text: .text%Java_java_util_zip_ZipFile_freeEntry;
+text: .text%Java_java_util_zip_ZipFile_getEntryTime;
+text: .text%Java_java_util_zip_ZipFile_getEntryCrc;
+text: .text%Java_java_util_zip_ZipFile_getEntryCSize;
+text: .text%Java_java_util_zip_ZipFile_getEntrySize;
+text: .text%Java_java_util_zip_ZipFile_getEntryFlag;
+text: .text%Java_java_util_zip_ZipFile_getEntryMethod;
+text: .text%Java_java_util_zip_ZipFile_getEntryBytes;
+text: .text%Java_java_util_zip_Inflater_initIDs;
+text: .text%Java_java_util_zip_Inflater_init;
+text: .text%inflateInit2_;
+text: .text%zcalloc;
+text: .text%inflateReset;
+text: .text%Java_java_util_zip_Inflater_inflateBytes;
+text: .text%inflate;
+text: .text%Java_java_util_zip_ZipFile_read;
+text: .text%ZIP_Read;
+text: .text%huft_build: OUTPUTDIR/inftrees.o;
+text: .text%zcfree;
+text: .text%Java_java_util_jar_JarFile_getMetaInfEntryNames;
+text: .text%ZIP_ReadEntry;
+text: .text%InflateFully;
+text: .text%inflateEnd;
+text: .text%Java_java_util_zip_Inflater_reset;
+text: .text%Java_java_util_zip_ZipFile_close;
+text: .text%ZIP_Close;
+text: .text%Java_java_util_zip_Inflater_end;
--- a/langtools/.hgtags Wed Jul 05 18:22:17 2017 +0200
+++ b/langtools/.hgtags Wed Jul 05 18:22:52 2017 +0200
@@ -177,3 +177,4 @@
d3d0b9cd76e04bf9e381b402630ac3cfe464bb38 jdk8-b53
9cf72631baf5cb1ebd8736c5efeab7746977ea68 jdk8-b54
e48e7e1f026b82d921433150180799898c088890 jdk8-b55
+363e9198b9de68ebf37a3e2c2f3f23543d3915cd jdk8-b56
--- a/langtools/makefiles/Makefile Wed Jul 05 18:22:17 2017 +0200
+++ b/langtools/makefiles/Makefile Wed Jul 05 18:22:52 2017 +0200
@@ -34,8 +34,9 @@
# and the bootstrap javac, to be run by the bootdir jvm.
$(eval $(call SetupJavaCompiler,BOOT_JAVAC,\
JAVAC:=$(JAVAC),\
- FLAGS:=-Xprefer:source -XDignore.symbol.file=true -g,\
- MODE:=SINGLE_THREADED_BATCH))
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA),\
+ FLAGS:=-XDignore.symbol.file=true -g -Xlint:all$(COMMA)-deprecation -Werror))
# Now setup the compilation of the properties compilation tool. You can depend
# upon $(BUILD_TOOLS) to trigger a compilation of the tools. Note that we
@@ -43,6 +44,8 @@
# program needs to be linked and run towards the new javac sources.
$(eval $(call SetupJavaCompilation,BUILD_TOOLS,\
SETUP:=BOOT_JAVAC,\
+ DISABLE_SJAVAC:=true,\
+ ADD_JAVAC_FLAGS:=-Xprefer:source,\
SRC:=$(LANGTOOLS_TOPDIR)/make/tools $(LANGTOOLS_TOPDIR)/src/share/classes,\
INCLUDES:=compileproperties genstubs,\
BIN:=$(LANGTOOLS_OUTPUTDIR)/btclasses))
@@ -93,6 +96,7 @@
# to compile javac again and to build the complete new jdk.
$(eval $(call SetupJavaCompilation,BUILD_BOOTSTRAP_LANGTOOLS,\
SETUP:=BOOT_JAVAC,\
+ DISABLE_SJAVAC:=true,\
SRC:=$(LANGTOOLS_TOPDIR)/src/share/classes $(LANGTOOLS_OUTPUTDIR)/gensrc,\
EXCLUDES:=com/sun/tools/javac/nio,\
BIN:=$(LANGTOOLS_OUTPUTDIR)/btclasses/bootstrap))
@@ -122,7 +126,7 @@
# exercises the functionality to verify that it works.
TOOL_GENSTUBS_CMD=$(JAVA) \
"-Xbootclasspath/p:$(LANGTOOLS_OUTPUTDIR)/dist/bootstrap/lib/javac.jar" \
- -cp "$(LANGTOOLS_OUTPUTDIR)/dist/bootstrap/lib/javac.jar$(PATH_SEP)$(LANGTOOLS_OUTPUTDIR)/btclasses" \
+ -classpath $(LANGTOOLS_OUTPUTDIR)/btclasses \
genstubs.GenStubs
# We fetch source from the JDK...
JDKS=$(JDK_TOPDIR)/src/share/classes
@@ -164,11 +168,9 @@
JVM:=$(JAVA),\
JAVAC:="-Xbootclasspath/p:$(LANGTOOLS_OUTPUTDIR)/dist/bootstrap/lib/javac.jar" \
-jar $(LANGTOOLS_OUTPUTDIR)/dist/bootstrap/lib/javac.jar,\
- FLAGS:=-Xprefer:source -XDignore.symbol.file=true,\
- SERVER_DIR:=$(JAVAC_SERVERS),\
- SERVER_JVM:=$(SERVER_JAVA),\
- MODE:=$(JAVAC_USE_MODE),\
- USE_DEPS:=$(JAVAC_USE_DEPS)))
+ FLAGS:=-XDignore.symbol.file=true -Xlint:all$(COMMA)-deprecation -Werror,\
+ SERVER_DIR:=$(SJAVAC_SERVER_DIR),\
+ SERVER_JVM:=$(SJAVAC_SERVER_JAVA)))
# javax.tools.JavaCompilerTool isn't really a suffix but this gets the file copied.
RESOURCE_SUFFIXES:=.gif .xml .css javax.tools.JavaCompilerTool