--- a/common/bin/hgforest.sh Thu Apr 11 09:39:46 2013 -0700
+++ b/common/bin/hgforest.sh Tue Apr 16 08:10:59 2013 -0700
@@ -30,7 +30,7 @@
# Python always buffers stdout significantly, thus we will not see any output from hg clone jdk,
# until a lot of time has passed! By passing -u to python, we get incremental updates
# on stdout. Much nicer.
-whichhg="`which hg`"
+whichhg="`which hg 2> /dev/null | grep -v '^no hg in'`"
if [ "${whichhg}" = "" ] ; then
echo Cannot find hg!
@@ -51,7 +51,7 @@
bpython="`basename "$python"`"
fi
-if [ "python" = "$bpython" -a -x "$python" ] ; then
+if [ -x "$python" -a ! -d "$python" -a "`${python} -V 2>&1 | cut -f 1 -d ' '`" = "Python" ] ; then
hg="${python} -u ${whichhg}"
else
echo Cannot find python from hg launcher. Running plain hg, which probably has buffered stdout.
--- a/common/makefiles/Main.gmk Thu Apr 11 09:39:46 2013 -0700
+++ b/common/makefiles/Main.gmk Tue Apr 16 08:10:59 2013 -0700
@@ -196,7 +196,7 @@
# Remove everything, except the output from configure.
-clean: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-nashorn clean-images clean-overlay-images clean-bootcycle-build clean-docs
+clean: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-nashorn clean-images clean-overlay-images clean-bootcycle-build clean-docs clean-test
@($(CD) $(OUTPUT_ROOT) && $(RM) -r tmp source_tips build.log* build-trace*.log*)
@$(ECHO) Cleaned all build artifacts.
@@ -237,6 +237,8 @@
clean-docs:
$(call CleanComponent,docs)
$(call CleanComponent,docstemp)
+clean-test:
+ $(call CleanComponent,testoutput)
.PHONY: langtools corba jaxp jaxws hotspot jdk nashorn images overlay-images install
.PHONY: langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only nashorn-only images-only overlay-images-only install-only
--- a/make/scripts/webrev.ksh Thu Apr 11 09:39:46 2013 -0700
+++ b/make/scripts/webrev.ksh Tue Apr 16 08:10:59 2013 -0700
@@ -1436,14 +1436,15 @@
{
rm -f $FLIST
if [ -z "$Nflag" ]; then
- print " File list from hg foutgoing $PWS ..."
+ print " File list from hg foutgoing $PWS ..."
outgoing_from_mercurial_forest
HG_LIST_FROM_COMMIT=1
fi
if [ ! -f $FLIST ]; then
# hg commit hasn't been run see what is lying around
- print "\n No outgoing, perhaps you haven't commited."
- print " File list from hg fstatus -mard ...\c"
+ print "\n No outgoing, perhaps you haven't commited."
+ NO_OUTGOING=
+ print " File list from hg fstatus -mard ...\c"
FSTAT_OPT=
fstatus
HG_LIST_FROM_COMMIT=0
@@ -1466,7 +1467,7 @@
done >> $FLIST
# Then all the added files
- # But some of these could have been "moved" or renamed ones
+ # But some of these could have been "moved" or renamed ones or copied ones
# so let's make sure we get the proper info
# hg status -aC will produce something like:
# A subdir/File3
@@ -1474,8 +1475,11 @@
# File4
# A subdir/File5
# The first and last are simple addition while the middle one
- # is a move/rename
-
+ # is a move/rename or a copy. We can't distinguish from a rename vs a copy
+ # without also getting the status of removed files. The middle case above
+ # is a rename if File4 is also shown a being removed. If File4 is not a
+ # removed file, then the middle case is a copy from File4 to subdir/File4
+ # FIXME - we're not distinguishing copy from rename
$HGCMD -aC | $FILTER | while read LINE; do
ldone=""
while [ -z "$ldone" ]; do
@@ -1625,6 +1629,7 @@
else
# hg commit hasn't been run see what is lying around
print "\n No outgoing, perhaps you haven't commited."
+ NO_OUTGOING=
fi
# First let's list all the modified or deleted files
@@ -1638,8 +1643,12 @@
# A subdir/File4
# File4
# A subdir/File5
- # The first and last are simple addition while the middle one
- # is a move/rename
+ # The first and last are simple addition while the middle one
+ # is a move/rename or a copy. We can't distinguish from a rename vs a copy
+ # without also getting the status of removed files. The middle case above
+ # is a rename if File4 is also shown a being removed. If File4 is not a
+ # removed file, then the middle case is a copy from File4 to subdir/File4
+ # FIXME - we're not distinguishing copy from rename
hg status $STATUS_REV -aC | $FILTER >$FLIST.temp
while read LINE; do
@@ -1905,7 +1914,7 @@
fi
fi
else
- # It's a rename (or a move), so let's make sure we move
+ # It's a rename (or a move), or a copy, so let's make sure we move
# to the right directory first, then restore it once done
current_dir=`pwd`
cd $CWS/$PDIR
@@ -2774,34 +2783,38 @@
cleanse_rmfile="sed 's/^\(@@ [0-9+,-]*\) [0-9+,-]* @@$/\1 +0,0 @@/'"
cleanse_newfile="sed 's/^@@ [0-9+,-]* \([0-9+,-]* @@\)$/@@ -0,0 \1/'"
- rm -f $WDIR/$DIR/$F.patch
- if [[ -z $rename ]]; then
- if [ ! -f $ofile ]; then
- diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
- > $WDIR/$DIR/$F.patch
- elif [ ! -f $nfile ]; then
- diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
- > $WDIR/$DIR/$F.patch
- else
- diff -u $ofile $nfile > $WDIR/$DIR/$F.patch
- fi
- else
- diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
- > $WDIR/$DIR/$F.patch
-
- diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
- >> $WDIR/$DIR/$F.patch
-
- fi
-
-
- #
- # Tack the patch we just made onto the accumulated patch for the
- # whole wad.
- #
- cat $WDIR/$DIR/$F.patch >> $WDIR/$WNAME.patch
-
- print " patch\c"
+ if [[ -v NO_OUTGOING ]];
+ then
+ # Only need to generate a patch file here if there are no commits in outgoing
+ rm -f $WDIR/$DIR/$F.patch
+ if [[ -z $rename ]]; then
+ if [ ! -f $ofile ]; then
+ diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
+ > $WDIR/$DIR/$F.patch
+ elif [ ! -f $nfile ]; then
+ diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
+ > $WDIR/$DIR/$F.patch
+ else
+ diff -u $ofile $nfile > $WDIR/$DIR/$F.patch
+ fi
+ else
+ diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
+ > $WDIR/$DIR/$F.patch
+
+ diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
+ >> $WDIR/$DIR/$F.patch
+
+ fi
+
+
+ #
+ # Tack the patch we just made onto the accumulated patch for the
+ # whole wad.
+ #
+ cat $WDIR/$DIR/$F.patch >> $WDIR/$WNAME.patch
+ fi
+
+ print " patch\c"
if [[ -f $ofile && -f $nfile && -z $mv_but_nodiff ]]; then
@@ -2894,6 +2907,32 @@
print
done < $FLIST
+# Create the new style mercurial patch here using hg export -r [all-revs] -g -o $CHANGESETPATH
+if [[ $SCM_MODE == "mercurial" ]]; then
+ if [[ !(-v NO_OUTGOING) ]]; then
+ EXPORTCHANGESET="$WNAME.changeset"
+ CHANGESETPATH=${WDIR}/${EXPORTCHANGESET}
+ rm -f $CHANGESETPATH
+ touch $CHANGESETPATH
+ if [[ -n $ALL_CREV ]]; then
+ rev_opt=
+ for rev in $ALL_CREV; do
+ rev_opt="$rev_opt --rev $rev"
+ done
+ elif [[ -n $FIRST_CREV ]]; then
+ rev_opt="--rev $FIRST_CREV"
+ fi
+
+ if [[ -n $rev_opt ]]; then
+ (cd $CWS;hg export -g $rev_opt -o $CHANGESETPATH)
+ # echo "Created new-patch: $CHANGESETPATH" 1>&2
+ # Use it in place of the jdk.patch created above
+ rm -f $WDIR/$WNAME.patch
+ fi
+ set +x
+ fi
+fi
+
frame_nav_js > $WDIR/ancnav.js
frame_navigation > $WDIR/ancnav.html
@@ -2989,9 +3028,13 @@
print "</td></tr>"
if [[ -f $WDIR/$WNAME.patch ]]; then
- print "<tr><th>Patch of changes:</th><td>"
- print "<a href=\"$WNAME.patch\">$WNAME.patch</a></td></tr>"
+ print "<tr><th>Patch of changes:</th><td>"
+ print "<a href=\"$WNAME.patch\">$WNAME.patch</a></td></tr>"
+elif [[ -f $CHANGESETPATH ]]; then
+ print "<tr><th>Changeset:</th><td>"
+ print "<a href=\"$EXPORTCHANGESET\">$EXPORTCHANGESET</a></td></tr>"
fi
+
if [[ -f $WDIR/$WNAME.pdf ]]; then
print "<tr><th>Printable review:</th><td>"
print "<a href=\"$WNAME.pdf\">$WNAME.pdf</a></td></tr>"