--- a/.hgtags-top-repo Tue Mar 08 16:05:16 2011 -0800
+++ b/.hgtags-top-repo Wed Jul 05 17:36:49 2017 +0200
@@ -106,3 +106,4 @@
a6b015b59fbc2518762c17ccc35702f03ef7713a jdk7-b129
cc58c11af15411042719e9c82707fdbef60a9e0f jdk7-b130
5d86d951426aaf340b1ba84ae2d5ab5da65a71e2 jdk7-b131
+0f62a65fb666b337caa585015ab6ea2e60e709ca jdk7-b132
--- a/Makefile Tue Mar 08 16:05:16 2011 -0800
+++ b/Makefile Wed Jul 05 17:36:49 2017 +0200
@@ -36,12 +36,6 @@
JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared
endif
-# For start and finish echo lines
-TITLE_TEXT = Control $(PLATFORM) $(ARCH) $(RELEASE)
-DATE_STAMP = `$(DATE) '+%y-%m-%d %H:%M'`
-START_ECHO = echo "$(TITLE_TEXT) $@ build started: $(DATE_STAMP)"
-FINISH_ECHO = echo "$(TITLE_TEXT) $@ build finished: $(DATE_STAMP)"
-
default: all
include $(JDK_MAKE_SHARED_DIR)/Defs-control.gmk
@@ -57,10 +51,6 @@
include ./make/sponsors-rules.gmk
include ./make/deploy-rules.gmk
-# What "all" means
-all::
- @$(START_ECHO)
-
all:: sanity
ifeq ($(SKIP_FASTDEBUG_BUILD), false)
@@ -73,40 +63,44 @@
all:: all_product_build
-all::
- @$(FINISH_ECHO)
+all_product_build::
# Everything for a full product build
-all_product_build::
- @$(START_ECHO)
+ifeq ($(SKIP_PRODUCT_BUILD), false)
-ifeq ($(SKIP_PRODUCT_BUILD), false)
-
all_product_build:: product_build
ifeq ($(BUILD_INSTALL), true)
all_product_build:: $(INSTALL)
clobber:: install-clobber
endif
-
+
ifeq ($(BUILD_SPONSORS), true)
all_product_build:: $(SPONSORS)
clobber:: sponsors-clobber
endif
-
+
ifneq ($(SKIP_COMPARE_IMAGES), true)
all_product_build:: compare-image
endif
endif
-all_product_build::
- @$(FINISH_ECHO)
+define StartTimer
+ $(MKDIR) -p $(BUILDTIMESDIR)
+ $(RM) $(BUILDTIMESDIR)/build_time_*
+ $(call RecordStartTime,TOTAL)
+endef
+
+define StopTimer
+ $(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,TOTAL) && $(call ReportBuildTimes,$1),)
+endef
# Generic build of basic repo series
generic_build_repo_series::
$(MKDIR) -p $(OUTPUTDIR)
$(MKDIR) -p $(OUTPUTDIR)/j2sdk-image
+ @$(call StartTimer)
ifeq ($(BUILD_LANGTOOLS), true)
generic_build_repo_series:: langtools
@@ -143,6 +137,9 @@
clobber:: deploy-clobber
endif
+generic_build_repo_series::
+ @$(call StopTimer,$(if $(DEBUG_NAME),$(DEBUG_NAME)_build,all_product_build))
+
# The debug build, fastdebug or debug. Needs special handling.
# Note that debug builds do NOT do INSTALL steps, but must be done
# after the product build and before the INSTALL step of the product build.
@@ -167,28 +164,22 @@
FRESH_DEBUG_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/../$(PLATFORM)-$(ARCH)-$(DEBUG_NAME)/j2sdk-image
create_fresh_product_bootdir: FRC
- @$(START_ECHO)
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_SETTINGS= \
build_product_image
- @$(FINISH_ECHO)
create_fresh_debug_bootdir: FRC
- @$(START_ECHO)
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_DEBUG_SETTINGS= \
build_debug_image
- @$(FINISH_ECHO)
create_fresh_fastdebug_bootdir: FRC
- @$(START_ECHO)
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_DEBUG_SETTINGS= \
build_fastdebug_image
- @$(FINISH_ECHO)
# Create boot image?
ifeq ($(SKIP_BOOT_CYCLE),false)
@@ -197,6 +188,8 @@
endif
endif
+
+
ifeq ($(DO_BOOT_CYCLE),true)
# Create the bootdir to use in the build
@@ -221,27 +214,23 @@
endif
build_product_image:
- @$(START_ECHO)
$(MAKE) \
SKIP_FASTDEBUG_BUILD=true \
SKIP_DEBUG_BUILD=true \
$(BOOT_CYCLE_SETTINGS) \
generic_build_repo_series
- @$(FINISH_ECHO)
# NOTE: On windows, do not use $(ABS_OUTPUTDIR)-$(DEBUG_NAME).
# Due to the use of short paths in $(ABS_OUTPUTDIR), this may
# not be the same location.
generic_debug_build:
- @$(START_ECHO)
$(MAKE) \
ALT_OUTPUTDIR=$(ABS_OUTPUTDIR)/../$(PLATFORM)-$(ARCH)-$(DEBUG_NAME) \
DEBUG_NAME=$(DEBUG_NAME) \
GENERATE_DOCS=false \
$(BOOT_CYCLE_DEBUG_SETTINGS) \
generic_build_repo_series
- @$(FINISH_ECHO)
build_debug_image:
$(MAKE) DEBUG_NAME=debug generic_debug_build
@@ -254,7 +243,8 @@
debug_build:: build_debug_image
fastdebug_build:: build_fastdebug_image
-clobber::
+clobber:: REPORT_BUILD_TIMES=
+clobber::
$(RM) -r $(OUTPUTDIR)/*
$(RM) -r $(OUTPUTDIR)/../$(PLATFORM)-$(ARCH)-debug/*
$(RM) -r $(OUTPUTDIR)/../$(PLATFORM)-$(ARCH)-fastdebug/*
--- a/hotspot/.hgtags Tue Mar 08 16:05:16 2011 -0800
+++ b/hotspot/.hgtags Wed Jul 05 17:36:49 2017 +0200
@@ -151,3 +151,5 @@
e9aa2ca89ad6c53420623d579765f9706ec523d7 jdk7-b130
0aa3b49089112d5faa77902ad680c582ab53f651 jdk7-b131
e9aa2ca89ad6c53420623d579765f9706ec523d7 hs21-b02
+0e531ab5ba04967a0e9aa6aef65e6eb3a0dcf632 jdk7-b132
+a8d643a4db47c7b58e0bcb49c77b5c3610de86a8 hs21-b03
--- a/make/Defs-internal.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/Defs-internal.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -28,21 +28,63 @@
# not contain rules.
#
-# Indicate that we are visiting a separate repo or component
+# The build times report is turned off by setting REPORT_BUILD_TIMES to nothing.
+# This is necessary for the target clobber/clean which will erase the
+# directories where the buildtimes are stored.
+REPORT_BUILD_TIMES=1
+# Store the build times in this directory.
+BUILDTIMESDIR=$(ABS_OUTPUTDIR)/tmp/buildtimes
+
+# Record starting time for build of a sub repository.
+define RecordStartTime
+$(MKDIR) -p $(BUILDTIMESDIR)
+$(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1
+$(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable
+endef
+
+# Indicate that we started to build a sub repository and record starting time.
define MakeStart
-$(PRINTF) "\n\n%s\n%s\n##### %-60.60s #####\n%s\n" \
+$(call RecordStartTime,$1)
+$(PRINTF) "\n\n%s\n%s\n##### %-60.60s #####\n%s\n\n" \
"########################################################################" \
"########################################################################" \
-"Entering $1 for target $2" \
+"Entering $1 for target(s) $2" \
"########################################################################"
endef
-define MakeFinish
-$(PRINTF) "%s\n##### %-60.60s #####\n%s\n%s\n\n" \
+# Record ending time and calculate the difference and store it in a
+# easy to read format. Handles builds that cross midnight. Expects
+# that a build will never take 24 hours or more.
+define RecordEndTime
+$(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1
+$(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable
+$(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \
+ $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
+ M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
+ > $(BUILDTIMESDIR)/build_time_diff_$1
+endef
+
+# Indicate that we are done.
+# Record ending time and print out the total time it took to build.
+define MakeFinish
+$(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,$1),)
+$(PRINTF) "%s\n##### %-60.60s #####\n%s\n##### %-60.60s #####\n%s\n\n" \
"########################################################################" \
-"Leaving $1 for target $2" \
+"Leaving $1 for target(s) $2" \
"########################################################################" \
-"########################################################################"
+$(if $(REPORT_BUILD_TIMES),"Build time `$(CAT) $(BUILDTIMESDIR)/build_time_diff_$1` for target(s) $2","") \
+"########################################################################"
+endef
+
+# Find all build_time_* files and print their contents in a list sorted
+# on the name of the sub repository.
+define ReportBuildTimes
+$(PRINTF) "-- Build times ----------\nTarget %s\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
+$1 \
+"`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
+"`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
+"`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \
+"`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
endef
ifdef OPENJDK
--- a/make/corba-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/corba-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -40,17 +40,17 @@
corba: corba-build
corba-build:
$(MKDIR) -p $(CORBA_OUTPUTDIR)
- @$(call MakeStart, corba, all)
+ @$(call MakeStart,corba,all)
($(CD) $(CORBA_TOPDIR)/make && \
$(MAKE) $(CORBA_BUILD_ARGUMENTS) all)
- @$(call MakeFinish, corba, all)
+ @$(call MakeFinish,corba,all)
corba-clobber::
$(MKDIR) -p $(CORBA_OUTPUTDIR)
- @$(call MakeStart, corba, clobber)
+ @$(call MakeStart,corba,clobber)
($(CD) $(CORBA_TOPDIR)/make && \
$(MAKE) $(CORBA_BUILD_ARGUMENTS) clobber)
- @$(call MakeFinish, corba, clobber)
+ @$(call MakeFinish,corba,clobber)
.PHONY: corba corba-build corba-clobber
--- a/make/deploy-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/deploy-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -116,18 +116,18 @@
deploy-build:
ifeq ($(BUILD_DEPLOY), true)
- @$(call MakeStart, deploy, $(DEPLOY_BUILD_TARGETS))
+ @$(call MakeStart,deploy,$(DEPLOY_BUILD_TARGETS))
($(CD) $(DEPLOY_TOPDIR)/make && \
$(MAKE) $(DEPLOY_BUILD_TARGETS) $(DEPLOY_BUILD_ARGUMENTS))
- @$(call MakeFinish, deploy, $(DEPLOY_BUILD_TARGETS))
+ @$(call MakeFinish,deploy,$(DEPLOY_BUILD_TARGETS))
endif
deploy-clobber::
ifeq ($(BUILD_DEPLOY), true)
- @$(call MakeStart, deploy, clobber)
+ @$(call MakeStart,deploy,clobber)
($(CD) $(DEPLOY_TOPDIR)/make && \
$(MAKE) clobber $(DEPLOY_BUILD_ARGUMENTS))
- @$(call MakeFinish, deploy, clobber)
+ @$(call MakeFinish,deploy,clobber)
endif
deploy-sanity::
--- a/make/hotspot-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/hotspot-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -96,10 +96,10 @@
hotspot-build::
$(MKDIR) -p $(HOTSPOT_OUTPUTDIR)
$(MKDIR) -p $(HOTSPOT_EXPORT_PATH)
- @$(call MakeStart, hotspot, $(HOTSPOT_TARGET))
+ @$(call MakeStart,hotspot,$(HOTSPOT_TARGET))
$(CD) $(HOTSPOT_TOPDIR)/make && \
$(MAKE) $(HOTSPOT_BUILD_ARGUMENTS) $(HOTSPOT_TARGET)
- @$(call MakeFinish, hotspot, $(HOTSPOT_TARGET))
+ @$(call MakeFinish,hotspot,$(HOTSPOT_TARGET))
#####################
# .PHONY
--- a/make/install-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/install-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -57,39 +57,39 @@
install-build:
ifeq ($(BUILD_INSTALL), true)
- @$(call MakeStart, install, $(INSTALL_BUILD_TARGETS))
+ @$(call MakeStart,install,$(INSTALL_BUILD_TARGETS))
($(CD) $(INSTALL_TOPDIR)/make && \
$(MAKE) $(INSTALL_BUILD_TARGETS) $(INSTALL_BUILD_ARGUMENTS))
- @$(call MakeFinish, install, $(INSTALL_BUILD_TARGETS))
+ @$(call MakeFinish,install,$(INSTALL_BUILD_TARGETS))
endif
update-patcher:
ifeq ($(BUILD_INSTALL), true)
if [ -r $(INSTALL_TOPDIR)/make/update/Makefile ]; then \
- $(call MakeStart, install update, all); \
+ $(call MakeStart,install_update,all); \
( $(CD) $(INSTALL_TOPDIR)/make/update && \
$(MAKE) all $(INSTALL_BUILD_ARGUMENTS) ); \
- $(call MakeFinish, install, all); \
+ $(call MakeFinish,install_update,all); \
fi
endif
update-patchgen:
ifeq ($(BUILD_INSTALL), true)
if [ -r $(INSTALL_TOPDIR)/make/update/Makefile ]; then \
- $(call MakeStart, install update, patchgen); \
+ $(call MakeStart,install_update,patchgen); \
( $(CD) $(INSTALL_TOPDIR)/make/update && \
$(MAKE) patchgen $(INSTALL_BUILD_ARGUMENTS) ); \
- $(call MakeFinish, install, patchgen); \
+ $(call MakeFinish,install_update,patchgen); \
fi
endif
installer:
ifeq ($(BUILD_INSTALL), true)
if [ -r $(INSTALL_TOPDIR)/make/installer/Makefile ]; then \
- $(call MakeStart, install installer, all); \
+ $(call MakeStart,install_installer,all); \
( $(CD) $(INSTALL_TOPDIR)/make/installer && \
$(MAKE) all $(INSTALL_BUILD_ARGUMENTS) ); \
- $(call MakeFinish, install, all); \
+ $(call MakeFinish,install_installer,all); \
fi
endif
@@ -99,10 +99,10 @@
install-clobber:
ifeq ($(BUILD_INSTALL), true)
- @$(call MakeStart, install, clobber)
+ @$(call MakeStart,install,clobber)
($(CD) $(INSTALL_TOPDIR)/make && \
$(MAKE) clobber $(INSTALL_BUILD_ARGUMENTS))
- @$(call MakeFinish, install, clobber)
+ @$(call MakeFinish,install,clobber)
endif
install-sanity::
--- a/make/jaxp-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/jaxp-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -40,17 +40,17 @@
jaxp: jaxp-build
jaxp-build:
$(MKDIR) -p $(JAXP_OUTPUTDIR)
- @$(call MakeStart, jaxp, all)
+ @$(call MakeStart,jaxp,all)
($(CD) $(JAXP_TOPDIR)/make && \
$(MAKE) $(JAXP_BUILD_ARGUMENTS) all)
- @$(call MakeFinish, jaxp, all)
+ @$(call MakeFinish,jaxp,all)
jaxp-clobber::
$(MKDIR) -p $(JAXP_OUTPUTDIR)
- @$(call MakeStart, jaxp, clobber)
+ @$(call MakeStart,jaxp,clobber)
($(CD) $(JAXP_TOPDIR)/make && \
$(MAKE) $(JAXP_BUILD_ARGUMENTS) clobber)
- @$(call MakeFinish, jaxp, clobber)
+ @$(call MakeFinish,jaxp,clobber)
.PHONY: jaxp jaxp-build jaxp-clobber
--- a/make/jaxws-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/jaxws-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -40,17 +40,17 @@
jaxws: jaxws-build
jaxws-build:
$(MKDIR) -p $(JAXWS_OUTPUTDIR)
- @$(call MakeStart, jaxws, all)
+ @$(call MakeStart,jaxws,all)
($(CD) $(JAXWS_TOPDIR)/make && \
$(MAKE) $(JAXWS_BUILD_ARGUMENTS) all)
- @$(call MakeFinish, jaxws, all)
+ @$(call MakeFinish,jaxws,all)
jaxws-clobber::
$(MKDIR) -p $(JAXWS_OUTPUTDIR)
- @$(call MakeStart, jaxws, clobber)
+ @$(call MakeStart,jaxws,clobber)
($(CD) $(JAXWS_TOPDIR)/make && \
$(MAKE) $(JAXWS_BUILD_ARGUMENTS) clobber)
- @$(call MakeFinish, jaxws, clobber)
+ @$(call MakeFinish,jaxws,clobber)
.PHONY: jaxws jaxws-build jaxws-clobber
--- a/make/jdk-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/jdk-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -75,16 +75,16 @@
jdk: jdk-build
jdk-build:
- @$(call MakeStart, jdk, $(JDK_BUILD_TARGETS))
+ @$(call MakeStart,jdk,$(JDK_BUILD_TARGETS))
( $(CD) $(JDK_TOPDIR)/make && \
$(MAKE) $(JDK_BUILD_TARGETS) $(JDK_BUILD_ARGUMENTS) ; )
- @$(call MakeFinish, jdk, $(JDK_BUILD_TARGETS))
+ @$(call MakeFinish,jdk,$(JDK_BUILD_TARGETS))
jdk-clobber::
- @$(call MakeStart, jdk, $(JDK_CLOBBER_TARGETS))
+ @$(call MakeStart,jdk,$(JDK_CLOBBER_TARGETS))
( $(CD) $(JDK_TOPDIR)/make && \
$(MAKE) $(JDK_CLOBBER_TARGETS) $(JDK_BUILD_ARGUMENTS) ; )
- @$(call MakeFinish, jdk, $(JDK_CLOBBER_TARGETS))
+ @$(call MakeFinish,jdk,$(JDK_CLOBBER_TARGETS))
jdk-sanity::
( $(CD) $(JDK_TOPDIR)/make && \
@@ -92,17 +92,17 @@
compare-images: compare-image
compare-image:
- @$(call MakeStart, jdk, compare-image)
+ @$(call MakeStart,jdk,compare-image)
( $(CD) $(JDK_TOPDIR)/make && \
$(MAKE) ALT_OUTPUTDIR=$(ABS_OUTPUTDIR) compare-image )
- @$(call MakeFinish, jdk, compare-image)
+ @$(call MakeFinish,jdk,compare-image)
compare-images-clobber: compare-image-clobber
compare-image-clobber:
- @$(call MakeStart, jdk, compare-image-clobber)
+ @$(call MakeStart,jdk,compare-image-clobber)
( $(CD) $(JDK_TOPDIR)/make && \
$(MAKE) ALT_OUTPUTDIR=$(ABS_OUTPUTDIR) compare-image-clobber )
- @$(call MakeFinish, jdk, compare-image-clobber)
+ @$(call MakeFinish,jdk,compare-image-clobber)
.PHONY: jdk jdk-build jdk-clobber jdk-sanity
--- a/make/langtools-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/langtools-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -35,17 +35,17 @@
langtools: langtools-build
langtools-build:
$(MKDIR) -p $(LANGTOOLS_OUTPUTDIR)
- @$(call MakeStart, langtools, all)
+ @$(call MakeStart,langtools,all)
($(CD) $(LANGTOOLS_TOPDIR)/make && \
$(MAKE) $(LANGTOOLS_BUILD_ARGUMENTS) all)
- @$(call MakeFinish, langtools, all)
+ @$(call MakeFinish,langtools,all)
langtools-clobber::
$(MKDIR) -p $(LANGTOOLS_OUTPUTDIR)
- @$(call MakeStart, langtools, clobber)
+ @$(call MakeStart,langtools,clobber)
($(CD) $(LANGTOOLS_TOPDIR)/make && \
$(MAKE) $(LANGTOOLS_BUILD_ARGUMENTS) clobber)
- @$(call MakeFinish, langtools, clobber)
+ @$(call MakeFinish,langtools,clobber)
.PHONY: langtools langtools-build langtools-clobber
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/scripts/webrev.ksh Wed Jul 05 17:36:49 2017 +0200
@@ -0,0 +1,3182 @@
+#!/bin/ksh -p
+#
+# CDDL HEADER START
+#
+# The contents of this file are subject to the terms of the
+# Common Development and Distribution License (the "License").
+# You may not use this file except in compliance with the License.
+#
+# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
+# or http://www.opensolaris.org/os/licensing.
+# See the License for the specific language governing permissions
+# and limitations under the License.
+#
+# When distributing Covered Code, include this CDDL HEADER in each
+# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
+# If applicable, add the following below this CDDL HEADER, with the
+# fields enclosed by brackets "[]" replaced with your own identifying
+# information: Portions Copyright [yyyy] [name of copyright owner]
+#
+# CDDL HEADER END
+#
+# Copyright (c) 2008, 2011, Oracle and/or its affiliates. All rights reserved.
+# Use is subject to license terms.
+#
+# This script takes a file list and a workspace and builds a set of html files
+# suitable for doing a code review of source changes via a web page.
+# Documentation is available via 'webrev -h'.
+#
+
+WEBREV_UPDATED=23.18-hg
+
+HTML='<?xml version="1.0"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">\n'
+
+FRAMEHTML='<?xml version="1.0"?>
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Frameset//EN"
+ "http://www.w3.org/TR/xhtml1/DTD/xhtml1-frameset.dtd">
+<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">\n'
+
+STDHEAD='<meta http-equiv="cache-control" content="no-cache" />
+<meta http-equiv="Pragma" content="no-cache" />
+<meta http-equiv="Expires" content="-1" />
+<!--
+ Note to customizers: the body of the webrev is IDed as SUNWwebrev
+ to allow easy overriding by users of webrev via the userContent.css
+ mechanism available in some browsers.
+
+ For example, to have all "removed" information be red instead of
+ brown, set a rule in your userContent.css file like:
+
+ body#SUNWwebrev span.removed { color: red ! important; }
+-->
+<style type="text/css" media="screen">
+body {
+ background-color: #eeeeee;
+}
+hr {
+ border: none 0;
+ border-top: 1px solid #aaa;
+ height: 1px;
+}
+div.summary {
+ font-size: .8em;
+ border-bottom: 1px solid #aaa;
+ padding-left: 1em;
+ padding-right: 1em;
+}
+div.summary h2 {
+ margin-bottom: 0.3em;
+}
+div.summary table th {
+ text-align: right;
+ vertical-align: top;
+ white-space: nowrap;
+}
+span.lineschanged {
+ font-size: 0.7em;
+}
+span.oldmarker {
+ color: red;
+ font-size: large;
+ font-weight: bold;
+}
+span.newmarker {
+ color: green;
+ font-size: large;
+ font-weight: bold;
+}
+span.removed {
+ color: brown;
+}
+span.changed {
+ color: blue;
+}
+span.new {
+ color: blue;
+ font-weight: bold;
+}
+a.print { font-size: x-small; }
+
+</style>
+
+<style type="text/css" media="print">
+pre { font-size: 0.8em; font-family: courier, monospace; }
+span.removed { color: #444; font-style: italic }
+span.changed { font-weight: bold; }
+span.new { font-weight: bold; }
+span.newmarker { font-size: 1.2em; font-weight: bold; }
+span.oldmarker { font-size: 1.2em; font-weight: bold; }
+a.print {display: none}
+hr { border: none 0; border-top: 1px solid #aaa; height: 1px; }
+</style>
+'
+
+#
+# UDiffs need a slightly different CSS rule for 'new' items (we don't
+# want them to be bolded as we do in cdiffs or sdiffs).
+#
+UDIFFCSS='
+<style type="text/css" media="screen">
+span.new {
+ color: blue;
+ font-weight: normal;
+}
+</style>
+'
+
+#
+# input_cmd | html_quote | output_cmd
+# or
+# html_quote filename | output_cmd
+#
+# Make a piece of source code safe for display in an HTML <pre> block.
+#
+html_quote()
+{
+ sed -e "s/&/\&/g" -e "s/</\</g" -e "s/>/\>/g" "$@" | expand
+}
+
+#
+# input_cmd | bug2url | output_cmd
+#
+# Scan for bugids and insert <a> links to the relevent bug database.
+#
+bug2url()
+{
+ sed -e 's|[0-9]\{5,\}|<a href=\"'$BUGURL'&\">&</a>|g'
+}
+
+#
+# input_cmd | sac2url | output_cmd
+#
+# Scan for ARC cases and insert <a> links to the relevent SAC database.
+# This is slightly complicated because inside the SWAN, SAC cases are
+# grouped by ARC: PSARC/2006/123. But on OpenSolaris.org, they are
+# referenced as 2006/123 (without labelling the ARC).
+#
+sac2url()
+{
+ if [[ -z $Oflag ]]; then
+ sed -e 's|\([A-Z]\{1,2\}ARC\)[ /]\([0-9]\{4\}\)/\([0-9]\{3\}\)|<a href=\"'$SACURL'\1/\2/\3\">\1 \2/\3</a>|g'
+ else
+ sed -e 's|\([A-Z]\{1,2\}ARC\)[ /]\([0-9]\{4\}\)/\([0-9]\{3\}\)|<a href=\"'$SACURL'/\2/\3\">\1 \2/\3</a>|g'
+ fi
+}
+
+#
+# strip_unchanged <infile> | output_cmd
+#
+# Removes chunks of sdiff documents that have not changed. This makes it
+# easier for a code reviewer to find the bits that have changed.
+#
+# Deleted lines of text are replaced by a horizontal rule. Some
+# identical lines are retained before and after the changed lines to
+# provide some context. The number of these lines is controlled by the
+# variable C in the $AWK script below.
+#
+# The script detects changed lines as any line that has a "<span class="
+# string embedded (unchanged lines have no particular class and are not
+# part of a <span>). Blank lines (without a sequence number) are also
+# detected since they flag lines that have been inserted or deleted.
+#
+strip_unchanged()
+{
+ $AWK '
+ BEGIN { C = c = 20 }
+ NF == 0 || /span class=/ {
+ if (c > C) {
+ c -= C
+ inx = 0
+ if (c > C) {
+ print "\n</pre><hr></hr><pre>"
+ inx = c % C
+ c = C
+ }
+
+ for (i = 0; i < c; i++)
+ print ln[(inx + i) % C]
+ }
+ c = 0;
+ print
+ next
+ }
+ { if (c >= C) {
+ ln[c % C] = $0
+ c++;
+ next;
+ }
+ c++;
+ print
+ }
+ END { if (c > (C * 2)) print "\n</pre><hr></hr>" }
+
+ ' $1
+}
+
+#
+# sdiff_to_html
+#
+# This function takes two files as arguments, obtains their diff, and
+# processes the diff output to present the files as an HTML document with
+# the files displayed side-by-side, differences shown in color. It also
+# takes a delta comment, rendered as an HTML snippet, as the third
+# argument. The function takes two files as arguments, then the name of
+# file, the path, and the comment. The HTML will be delivered on stdout,
+# e.g.
+#
+# $ sdiff_to_html old/usr/src/tools/scripts/webrev.sh \
+# new/usr/src/tools/scripts/webrev.sh \
+# webrev.sh usr/src/tools/scripts \
+# '<a href="http://monaco.sfbay.sun.com/detail.jsp?cr=1234567">
+# 1234567</a> my bugid' > <file>.html
+#
+# framed_sdiff() is then called which creates $2.frames.html
+# in the webrev tree.
+#
+# FYI: This function is rather unusual in its use of awk. The initial
+# diff run produces conventional diff output showing changed lines mixed
+# with editing codes. The changed lines are ignored - we're interested in
+# the editing codes, e.g.
+#
+# 8c8
+# 57a61
+# 63c66,76
+# 68,93d80
+# 106d90
+# 108,110d91
+#
+# These editing codes are parsed by the awk script and used to generate
+# another awk script that generates HTML, e.g the above lines would turn
+# into something like this:
+#
+# BEGIN { printf "<pre>\n" }
+# function sp(n) {for (i=0;i<n;i++)printf "\n"}
+# function wl(n) {printf "<font color=%s>%4d %s </font>\n", n, NR, $0}
+# NR==8 {wl("#7A7ADD");next}
+# NR==54 {wl("#7A7ADD");sp(3);next}
+# NR==56 {wl("#7A7ADD");next}
+# NR==57 {wl("black");printf "\n"; next}
+# : :
+#
+# This script is then run on the original source file to generate the
+# HTML that corresponds to the source file.
+#
+# The two HTML files are then combined into a single piece of HTML that
+# uses an HTML table construct to present the files side by side. You'll
+# notice that the changes are color-coded:
+#
+# black - unchanged lines
+# blue - changed lines
+# bold blue - new lines
+# brown - deleted lines
+#
+# Blank lines are inserted in each file to keep unchanged lines in sync
+# (side-by-side). This format is familiar to users of sdiff(1) or
+# Teamware's filemerge tool.
+#
+sdiff_to_html()
+{
+ diff -b $1 $2 > /tmp/$$.diffs
+
+ TNAME=$3
+ TPATH=$4
+ COMMENT=$5
+
+ #
+ # Now we have the diffs, generate the HTML for the old file.
+ #
+ $AWK '
+ BEGIN {
+ printf "function sp(n) {for (i=0;i<n;i++)printf \"\\n\"}\n"
+ printf "function removed() "
+ printf "{printf \"<span class=\\\"removed\\\">%%4d %%s</span>\\n\", NR, $0}\n"
+ printf "function changed() "
+ printf "{printf \"<span class=\\\"changed\\\">%%4d %%s</span>\\n\", NR, $0}\n"
+ printf "function bl() {printf \"%%4d %%s\\n\", NR, $0}\n"
+}
+ /^</ {next}
+ /^>/ {next}
+ /^---/ {next}
+
+ {
+ split($1, a, /[cad]/) ;
+ if (index($1, "a")) {
+ if (a[1] == 0) {
+ n = split(a[2], r, /,/);
+ if (n == 1)
+ printf "BEGIN\t\t{sp(1)}\n"
+ else
+ printf "BEGIN\t\t{sp(%d)}\n",\
+ (r[2] - r[1]) + 1
+ next
+ }
+
+ printf "NR==%s\t\t{", a[1]
+ n = split(a[2], r, /,/);
+ s = r[1];
+ if (n == 1)
+ printf "bl();printf \"\\n\"; next}\n"
+ else {
+ n = r[2] - r[1]
+ printf "bl();sp(%d);next}\n",\
+ (r[2] - r[1]) + 1
+ }
+ next
+ }
+ if (index($1, "d")) {
+ n = split(a[1], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ if (n == 1)
+ printf "NR==%s\t\t{removed(); next}\n" , n1
+ else
+ printf "NR==%s,NR==%s\t{removed(); next}\n" , n1, n2
+ next
+ }
+ if (index($1, "c")) {
+ n = split(a[1], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ final = n2
+ d1 = 0
+ if (n == 1)
+ printf "NR==%s\t\t{changed();" , n1
+ else {
+ d1 = n2 - n1
+ printf "NR==%s,NR==%s\t{changed();" , n1, n2
+ }
+ m = split(a[2], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ if (m > 1) {
+ d2 = n2 - n1
+ if (d2 > d1) {
+ if (n > 1) printf "if (NR==%d)", final
+ printf "sp(%d);", d2 - d1
+ }
+ }
+ printf "next}\n" ;
+
+ next
+ }
+ }
+
+ END { printf "{printf \"%%4d %%s\\n\", NR, $0 }\n" }
+ ' /tmp/$$.diffs > /tmp/$$.file1
+
+ #
+ # Now generate the HTML for the new file
+ #
+ $AWK '
+ BEGIN {
+ printf "function sp(n) {for (i=0;i<n;i++)printf \"\\n\"}\n"
+ printf "function new() "
+ printf "{printf \"<span class=\\\"new\\\">%%4d %%s</span>\\n\", NR, $0}\n"
+ printf "function changed() "
+ printf "{printf \"<span class=\\\"changed\\\">%%4d %%s</span>\\n\", NR, $0}\n"
+ printf "function bl() {printf \"%%4d %%s\\n\", NR, $0}\n"
+ }
+
+ /^</ {next}
+ /^>/ {next}
+ /^---/ {next}
+
+ {
+ split($1, a, /[cad]/) ;
+ if (index($1, "d")) {
+ if (a[2] == 0) {
+ n = split(a[1], r, /,/);
+ if (n == 1)
+ printf "BEGIN\t\t{sp(1)}\n"
+ else
+ printf "BEGIN\t\t{sp(%d)}\n",\
+ (r[2] - r[1]) + 1
+ next
+ }
+
+ printf "NR==%s\t\t{", a[2]
+ n = split(a[1], r, /,/);
+ s = r[1];
+ if (n == 1)
+ printf "bl();printf \"\\n\"; next}\n"
+ else {
+ n = r[2] - r[1]
+ printf "bl();sp(%d);next}\n",\
+ (r[2] - r[1]) + 1
+ }
+ next
+ }
+ if (index($1, "a")) {
+ n = split(a[2], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ if (n == 1)
+ printf "NR==%s\t\t{new() ; next}\n" , n1
+ else
+ printf "NR==%s,NR==%s\t{new() ; next}\n" , n1, n2
+ next
+ }
+ if (index($1, "c")) {
+ n = split(a[2], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ final = n2
+ d2 = 0;
+ if (n == 1) {
+ final = n1
+ printf "NR==%s\t\t{changed();" , n1
+ } else {
+ d2 = n2 - n1
+ printf "NR==%s,NR==%s\t{changed();" , n1, n2
+ }
+ m = split(a[1], r, /,/);
+ n1 = r[1]
+ n2 = r[2]
+ if (m > 1) {
+ d1 = n2 - n1
+ if (d1 > d2) {
+ if (n > 1) printf "if (NR==%d)", final
+ printf "sp(%d);", d1 - d2
+ }
+ }
+ printf "next}\n" ;
+ next
+ }
+ }
+ END { printf "{printf \"%%4d %%s\\n\", NR, $0 }\n" }
+ ' /tmp/$$.diffs > /tmp/$$.file2
+
+ #
+ # Post-process the HTML files by running them back through $AWK
+ #
+ html_quote < $1 | $AWK -f /tmp/$$.file1 > /tmp/$$.file1.html
+
+ html_quote < $2 | $AWK -f /tmp/$$.file2 > /tmp/$$.file2.html
+
+ #
+ # Now combine into a valid HTML file and side-by-side into a table
+ #
+ print "$HTML<head>$STDHEAD"
+ print "<title>$WNAME Sdiff $TPATH </title>"
+ print "</head><body id=\"SUNWwebrev\">"
+ print "<h2>$TPATH/$TNAME</h2>"
+ print "<a class=\"print\" href=\"javascript:print()\">Print this page</a>"
+ print "<pre>$COMMENT</pre>\n"
+ print "<table><tr valign=\"top\">"
+ print "<td><pre>"
+
+ strip_unchanged /tmp/$$.file1.html
+
+ print "</pre></td><td><pre>"
+
+ strip_unchanged /tmp/$$.file2.html
+
+ print "</pre></td>"
+ print "</tr></table>"
+ print "</body></html>"
+
+ framed_sdiff $TNAME $TPATH /tmp/$$.file1.html /tmp/$$.file2.html \
+ "$COMMENT"
+}
+
+
+#
+# framed_sdiff <filename> <filepath> <lhsfile> <rhsfile> <comment>
+#
+# Expects lefthand and righthand side html files created by sdiff_to_html.
+# We use insert_anchors() to augment those with HTML navigation anchors,
+# and then emit the main frame. Content is placed into:
+#
+# $WDIR/DIR/$TNAME.lhs.html
+# $WDIR/DIR/$TNAME.rhs.html
+# $WDIR/DIR/$TNAME.frames.html
+#
+# NOTE: We rely on standard usage of $WDIR and $DIR.
+#
+function framed_sdiff
+{
+ typeset TNAME=$1
+ typeset TPATH=$2
+ typeset lhsfile=$3
+ typeset rhsfile=$4
+ typeset comments=$5
+ typeset RTOP
+
+ # Enable html files to access WDIR via a relative path.
+ RTOP=$(relative_dir $TPATH $WDIR)
+
+ # Make the rhs/lhs files and output the frameset file.
+ print "$HTML<head>$STDHEAD" > $WDIR/$DIR/$TNAME.lhs.html
+
+ cat >> $WDIR/$DIR/$TNAME.lhs.html <<-EOF
+ <script type="text/javascript" src="$RTOP/ancnav.js"></script>
+ </head>
+ <body id="SUNWwebrev" onkeypress="keypress(event);">
+ <a name="0"></a>
+ <pre>$comments</pre><hr></hr>
+ EOF
+
+ cp $WDIR/$DIR/$TNAME.lhs.html $WDIR/$DIR/$TNAME.rhs.html
+
+ insert_anchors $lhsfile >> $WDIR/$DIR/$TNAME.lhs.html
+ insert_anchors $rhsfile >> $WDIR/$DIR/$TNAME.rhs.html
+
+ close='</body></html>'
+
+ print $close >> $WDIR/$DIR/$TNAME.lhs.html
+ print $close >> $WDIR/$DIR/$TNAME.rhs.html
+
+ print "$FRAMEHTML<head>$STDHEAD" > $WDIR/$DIR/$TNAME.frames.html
+ print "<title>$WNAME Framed-Sdiff " \
+ "$TPATH/$TNAME</title> </head>" >> $WDIR/$DIR/$TNAME.frames.html
+ cat >> $WDIR/$DIR/$TNAME.frames.html <<-EOF
+ <frameset rows="*,60">
+ <frameset cols="50%,50%">
+ <frame src="$TNAME.lhs.html" scrolling="auto" name="lhs" />
+ <frame src="$TNAME.rhs.html" scrolling="auto" name="rhs" />
+ </frameset>
+ <frame src="$RTOP/ancnav.html" scrolling="no" marginwidth="0"
+ marginheight="0" name="nav" />
+ <noframes>
+ <body id="SUNWwebrev">
+ Alas 'frames' webrev requires that your browser supports frames
+ and has the feature enabled.
+ </body>
+ </noframes>
+ </frameset>
+ </html>
+ EOF
+}
+
+
+#
+# fix_postscript
+#
+# Merge codereview output files to a single conforming postscript file, by:
+# - removing all extraneous headers/trailers
+# - making the page numbers right
+# - removing pages devoid of contents which confuse some
+# postscript readers.
+#
+# From Casper.
+#
+function fix_postscript
+{
+ infile=$1
+
+ cat > /tmp/$$.crmerge.pl << \EOF
+
+ print scalar(<>); # %!PS-Adobe---
+ print "%%Orientation: Landscape\n";
+
+ $pno = 0;
+ $doprint = 1;
+
+ $page = "";
+
+ while (<>) {
+ next if (/^%%Pages:\s*\d+/);
+
+ if (/^%%Page:/) {
+ if ($pno == 0 || $page =~ /\)S/) {
+ # Header or single page containing text
+ print "%%Page: ? $pno\n" if ($pno > 0);
+ print $page;
+ $pno++;
+ } else {
+ # Empty page, skip it.
+ }
+ $page = "";
+ $doprint = 1;
+ next;
+ }
+
+ # Skip from %%Trailer of one document to Endprolog
+ # %%Page of the next
+ $doprint = 0 if (/^%%Trailer/);
+ $page .= $_ if ($doprint);
+ }
+
+ if ($page =~ /\)S/) {
+ print "%%Page: ? $pno\n";
+ print $page;
+ } else {
+ $pno--;
+ }
+ print "%%Trailer\n%%Pages: $pno\n";
+EOF
+
+ $PERL /tmp/$$.crmerge.pl < $infile
+}
+
+
+#
+# input_cmd | insert_anchors | output_cmd
+#
+# Flag blocks of difference with sequentially numbered invisible
+# anchors. These are used to drive the frames version of the
+# sdiffs output.
+#
+# NOTE: Anchor zero flags the top of the file irrespective of changes,
+# an additional anchor is also appended to flag the bottom.
+#
+# The script detects changed lines as any line that has a "<span
+# class=" string embedded (unchanged lines have no class set and are
+# not part of a <span>. Blank lines (without a sequence number)
+# are also detected since they flag lines that have been inserted or
+# deleted.
+#
+function insert_anchors
+{
+ $AWK '
+ function ia() {
+ # This should be able to be a singleton <a /> but that
+ # seems to trigger a bug in firefox a:hover rule processing
+ printf "<a name=\"%d\" id=\"anc%d\"></a>", anc, anc++;
+ }
+
+ BEGIN {
+ anc=1;
+ inblock=1;
+ printf "<pre>\n";
+ }
+ NF == 0 || /^<span class=/ {
+ if (inblock == 0) {
+ ia();
+ inblock=1;
+ }
+ print;
+ next;
+ }
+ {
+ inblock=0;
+ print;
+ }
+ END {
+ ia();
+
+ printf "<b style=\"font-size: large; color: red\">";
+ printf "--- EOF ---</b>"
+ for(i=0;i<8;i++) printf "\n\n\n\n\n\n\n\n\n\n";
+ printf "</pre>"
+ printf "<form name=\"eof\">";
+ printf "<input name=\"value\" value=\"%d\" type=\"hidden\" />",
+ anc - 1;
+ printf "</form>";
+ }
+ ' $1
+}
+
+
+#
+# relative_dir
+#
+# Print a relative return path from $1 to $2. For example if
+# $1=/tmp/myreview/raw_files/usr/src/tools/scripts and $2=/tmp/myreview,
+# this function would print "../../../../".
+#
+# In the event that $1 is not in $2 a warning is printed to stderr,
+# and $2 is returned-- the result of this is that the resulting webrev
+# is not relocatable.
+#
+function relative_dir
+{
+ d1=$1
+ d2=$2
+ if [[ "$d1" == "." ]]; then
+ print "."
+ else
+ typeset cur="${d1##$d2?(/)}"
+ typeset ret=""
+ if [[ $d2 == $cur ]]; then # Should never happen.
+ # Should never happen.
+ print -u2 "\nWARNING: relative_dir: \"$1\" not relative "
+ print -u2 "to \"$2\". Check input paths. Framed webrev "
+ print -u2 "will not be relocatable!"
+ print $2
+ return
+ fi
+
+ while [[ -n ${cur} ]];
+ do
+ cur=${cur%%*(/)*([!/])}
+ if [[ -z $ret ]]; then
+ ret=".."
+ else
+ ret="../$ret"
+ fi
+ done
+ print $ret
+ fi
+}
+
+
+#
+# frame_nav_js
+#
+# Emit javascript for frame navigation
+#
+function frame_nav_js
+{
+cat << \EOF
+var myInt;
+var scrolling=0;
+var sfactor = 3;
+var scount=10;
+
+function scrollByPix() {
+ if (scount<=0) {
+ sfactor*=1.2;
+ scount=10;
+ }
+ parent.lhs.scrollBy(0,sfactor);
+ parent.rhs.scrollBy(0,sfactor);
+ scount--;
+}
+
+function scrollToAnc(num) {
+
+ // Update the value of the anchor in the form which we use as
+ // storage for this value. setAncValue() will take care of
+ // correcting for overflow and underflow of the value and return
+ // us the new value.
+ num = setAncValue(num);
+
+ // Set location and scroll back a little to expose previous
+ // lines.
+ //
+ // Note that this could be improved: it is possible although
+ // complex to compute the x and y position of an anchor, and to
+ // scroll to that location directly.
+ //
+ parent.lhs.location.replace(parent.lhs.location.pathname + "#" + num);
+ parent.rhs.location.replace(parent.rhs.location.pathname + "#" + num);
+
+ parent.lhs.scrollBy(0,-30);
+ parent.rhs.scrollBy(0,-30);
+}
+
+function getAncValue()
+{
+ return (parseInt(parent.nav.document.diff.real.value));
+}
+
+function setAncValue(val)
+{
+ if (val <= 0) {
+ val = 0;
+ parent.nav.document.diff.real.value = val;
+ parent.nav.document.diff.display.value = "BOF";
+ return (val);
+ }
+
+ //
+ // The way we compute the max anchor value is to stash it
+ // inline in the left and right hand side pages-- it's the same
+ // on each side, so we pluck from the left.
+ //
+ maxval = parent.lhs.document.eof.value.value;
+ if (val < maxval) {
+ parent.nav.document.diff.real.value = val;
+ parent.nav.document.diff.display.value = val.toString();
+ return (val);
+ }
+
+ // this must be: val >= maxval
+ val = maxval;
+ parent.nav.document.diff.real.value = val;
+ parent.nav.document.diff.display.value = "EOF";
+ return (val);
+}
+
+function stopScroll() {
+ if (scrolling==1) {
+ clearInterval(myInt);
+ scrolling=0;
+ }
+}
+
+function startScroll() {
+ stopScroll();
+ scrolling=1;
+ myInt=setInterval("scrollByPix()",10);
+}
+
+function handlePress(b) {
+
+ switch (b) {
+ case 1 :
+ scrollToAnc(-1);
+ break;
+ case 2 :
+ scrollToAnc(getAncValue() - 1);
+ break;
+ case 3 :
+ sfactor=-3;
+ startScroll();
+ break;
+ case 4 :
+ sfactor=3;
+ startScroll();
+ break;
+ case 5 :
+ scrollToAnc(getAncValue() + 1);
+ break;
+ case 6 :
+ scrollToAnc(999999);
+ break;
+ }
+}
+
+function handleRelease(b) {
+ stopScroll();
+}
+
+function keypress(ev) {
+ var keynum;
+ var keychar;
+
+ if (window.event) { // IE
+ keynum = ev.keyCode;
+ } else if (ev.which) { // non-IE
+ keynum = ev.which;
+ }
+
+ keychar = String.fromCharCode(keynum);
+
+ if (keychar == "k") {
+ handlePress(2);
+ return (0);
+ } else if (keychar == "j" || keychar == " ") {
+ handlePress(5);
+ return (0);
+ }
+ return (1);
+}
+
+function ValidateDiffNum(){
+ val = parent.nav.document.diff.display.value;
+ if (val == "EOF") {
+ scrollToAnc(999999);
+ return;
+ }
+
+ if (val == "BOF") {
+ scrollToAnc(0);
+ return;
+ }
+
+ i=parseInt(val);
+ if (isNaN(i)) {
+ parent.nav.document.diff.display.value = getAncValue();
+ } else {
+ scrollToAnc(i);
+ }
+ return false;
+}
+
+EOF
+}
+
+#
+# frame_navigation
+#
+# Output anchor navigation file for framed sdiffs.
+#
+function frame_navigation
+{
+ print "$HTML<head>$STDHEAD"
+
+ cat << \EOF
+<title>Anchor Navigation</title>
+<meta http-equiv="Content-Script-Type" content="text/javascript" />
+<meta http-equiv="Content-Type" content="text/html" />
+
+<style type="text/css">
+ div.button td { padding-left: 5px; padding-right: 5px;
+ background-color: #eee; text-align: center;
+ border: 1px #444 outset; cursor: pointer; }
+ div.button a { font-weight: bold; color: black }
+ div.button td:hover { background: #ffcc99; }
+</style>
+EOF
+
+ print "<script type=\"text/javascript\" src=\"ancnav.js\"></script>"
+
+ cat << \EOF
+</head>
+<body id="SUNWwebrev" bgcolor="#eeeeee" onload="document.diff.real.focus();"
+ onkeypress="keypress(event);">
+ <noscript lang="javascript">
+ <center>
+ <p><big>Framed Navigation controls require Javascript</big><br />
+ Either this browser is incompatable or javascript is not enabled</p>
+ </center>
+ </noscript>
+ <table width="100%" border="0" align="center">
+ <tr>
+ <td valign="middle" width="25%">Diff navigation:
+ Use 'j' and 'k' for next and previous diffs; or use buttons
+ at right</td>
+ <td align="center" valign="top" width="50%">
+ <div class="button">
+ <table border="0" align="center">
+ <tr>
+ <td>
+ <a onMouseDown="handlePress(1);return true;"
+ onMouseUp="handleRelease(1);return true;"
+ onMouseOut="handleRelease(1);return true;"
+ onClick="return false;"
+ title="Go to Beginning Of file">BOF</a></td>
+ <td>
+ <a onMouseDown="handlePress(3);return true;"
+ onMouseUp="handleRelease(3);return true;"
+ onMouseOut="handleRelease(3);return true;"
+ title="Scroll Up: Press and Hold to accelerate"
+ onClick="return false;">Scroll Up</a></td>
+ <td>
+ <a onMouseDown="handlePress(2);return true;"
+ onMouseUp="handleRelease(2);return true;"
+ onMouseOut="handleRelease(2);return true;"
+ title="Go to previous Diff"
+ onClick="return false;">Prev Diff</a>
+ </td></tr>
+
+ <tr>
+ <td>
+ <a onMouseDown="handlePress(6);return true;"
+ onMouseUp="handleRelease(6);return true;"
+ onMouseOut="handleRelease(6);return true;"
+ onClick="return false;"
+ title="Go to End Of File">EOF</a></td>
+ <td>
+ <a onMouseDown="handlePress(4);return true;"
+ onMouseUp="handleRelease(4);return true;"
+ onMouseOut="handleRelease(4);return true;"
+ title="Scroll Down: Press and Hold to accelerate"
+ onClick="return false;">Scroll Down</a></td>
+ <td>
+ <a onMouseDown="handlePress(5);return true;"
+ onMouseUp="handleRelease(5);return true;"
+ onMouseOut="handleRelease(5);return true;"
+ title="Go to next Diff"
+ onClick="return false;">Next Diff</a></td>
+ </tr>
+ </table>
+ </div>
+ </td>
+ <th valign="middle" width="25%">
+ <form action="" name="diff" onsubmit="return ValidateDiffNum();">
+ <input name="display" value="BOF" size="8" type="text" />
+ <input name="real" value="0" size="8" type="hidden" />
+ </form>
+ </th>
+ </tr>
+ </table>
+ </body>
+</html>
+EOF
+}
+
+
+
+#
+# diff_to_html <filename> <filepath> { U | C } <comment>
+#
+# Processes the output of diff to produce an HTML file representing either
+# context or unified diffs.
+#
+diff_to_html()
+{
+ TNAME=$1
+ TPATH=$2
+ DIFFTYPE=$3
+ COMMENT=$4
+
+ print "$HTML<head>$STDHEAD"
+ print "<title>$WNAME ${DIFFTYPE}diff $TPATH</title>"
+
+ if [[ $DIFFTYPE == "U" ]]; then
+ print "$UDIFFCSS"
+ fi
+
+ cat <<-EOF
+ </head>
+ <body id="SUNWwebrev">
+ <h2>$TPATH</h2>
+ <a class="print" href="javascript:print()">Print this page</a>
+ <pre>$COMMENT</pre>
+ <pre>
+EOF
+
+ html_quote | $AWK '
+ /^--- new/ { next }
+ /^\+\+\+ new/ { next }
+ /^--- old/ { next }
+ /^\*\*\* old/ { next }
+ /^\*\*\*\*/ { next }
+ /^-------/ { printf "<center><h1>%s</h1></center>\n", $0; next }
+ /^\@\@.*\@\@$/ { printf "</pre><hr /><pre>\n";
+ printf "<span class=\"newmarker\">%s</span>\n", $0;
+ next}
+
+ /^\*\*\*/ { printf "<hr /><span class=\"oldmarker\">%s</span>\n", $0;
+ next}
+ /^---/ { printf "<span class=\"newmarker\">%s</span>\n", $0;
+ next}
+ /^\+/ {printf "<span class=\"new\">%s</span>\n", $0; next}
+ /^!/ {printf "<span class=\"changed\">%s</span>\n", $0; next}
+ /^-/ {printf "<span class=\"removed\">%s</span>\n", $0; next}
+ {printf "%s\n", $0; next}
+ '
+
+ print "</pre></body></html>\n"
+}
+
+
+#
+# source_to_html { new | old } <filename>
+#
+# Process a plain vanilla source file to transform it into an HTML file.
+#
+source_to_html()
+{
+ WHICH=$1
+ TNAME=$2
+
+ print "$HTML<head>$STDHEAD"
+ print "<title>$WHICH $TNAME</title>"
+ print "<body id=\"SUNWwebrev\">"
+ print "<pre>"
+ html_quote | $AWK '{line += 1 ; printf "%4d %s\n", line, $0 }'
+ print "</pre></body></html>"
+}
+
+#
+# teamwarecomments {text|html} parent-file child-file
+#
+# Find the first delta in the child that's not in the parent. Get the
+# newest delta from the parent, get all deltas from the child starting
+# with that delta, and then get all info starting with the second oldest
+# delta in that list (the first delta unique to the child).
+#
+# This code adapted from Bill Shannon's "spc" script
+#
+comments_from_teamware()
+{
+ fmt=$1
+ pfile=$PWS/$2
+ cfile=$CWS/$3
+
+ psid=$($SCCS prs -d:I: $pfile 2>/dev/null)
+ if [[ -z "$psid" ]]; then
+ psid=1.1
+ fi
+
+ set -A sids $($SCCS prs -l -r$psid -d:I: $cfile 2>/dev/null)
+ N=${#sids[@]}
+
+ nawkprg='
+ /^COMMENTS:/ {p=1; next}
+ /^D [0-9]+\.[0-9]+/ {printf "--- %s ---\n", $2; p=0; }
+ NF == 0u { next }
+ {if (p==0) next; print $0 }'
+
+ if [[ $N -ge 2 ]]; then
+ sid1=${sids[$((N-2))]} # Gets 2nd to last sid
+
+ if [[ $fmt == "text" ]]; then
+ $SCCS prs -l -r$sid1 $cfile 2>/dev/null | \
+ $AWK "$nawkprg"
+ return
+ fi
+
+ $SCCS prs -l -r$sid1 $cfile 2>/dev/null | \
+ html_quote | bug2url | sac2url | $AWK "$nawkprg"
+ fi
+}
+
+#
+# wxcomments {text|html} filepath
+#
+# Given the pathname of a file, find its location in a "wx" active file
+# list and print the following sccs comment. Output is either text or
+# HTML; if the latter, embedded bugids (sequence of 5 or more digits) are
+# turned into URLs.
+#
+comments_from_wx()
+{
+ typeset fmt=$1
+ typeset p=$2
+
+ comm=`$AWK '
+ $1 == "'$p'" {
+ do getline ; while (NF > 0)
+ getline
+ while (NF > 0) { print ; getline }
+ exit
+ }' < $wxfile`
+
+ if [[ $fmt == "text" ]]; then
+ print "$comm"
+ return
+ fi
+
+ print "$comm" | html_quote | bug2url | sac2url
+}
+
+comments_from_mercurial()
+{
+ fmt=$1
+ pfile=$PWS/$2
+ cfile=$CWS/$3
+
+ logdir=`dirname $cfile`
+ logf=`basename $cfile`
+ if [ -d $logdir ]; then
+ ( cd $logdir;
+ active=`hg status $logf 2>/dev/null`
+ # If the output from 'hg status' is not empty, it means the file
+ # hasn't been committed, so don't fetch comments.
+ if [[ -z $active ]] ; then
+ if [[ -n $ALL_CREV ]]; then
+ rev_opt=
+ for rev in $ALL_CREV; do
+ rev_opt="$rev_opt --rev $rev"
+ done
+ comm=`hg log $rev_opt --follow --template 'rev {rev} : {desc}\n' $logf`
+ elif [[ -n $FIRST_CREV ]]; then
+ comm=`hg log --rev $FIRST_CREV:tip --follow --template 'rev {rev} : {desc}\n' $logf`
+ else
+ comm=`hg log -l1 --follow --template 'rev {rev} : {desc}\n' $logf`
+ fi
+ else
+ comm=""
+ fi
+ if [[ $fmt == "text" ]]; then
+ print "$comm"
+ return
+ fi
+
+ print "$comm" | html_quote | bug2url | sac2url
+ )
+ fi
+}
+
+
+#
+# getcomments {text|html} filepath parentpath
+#
+# Fetch the comments depending on what SCM mode we're in.
+#
+getcomments()
+{
+ typeset fmt=$1
+ typeset p=$2
+ typeset pp=$3
+
+ if [[ -n $wxfile ]]; then
+ comments_from_wx $fmt $p
+ else
+ if [[ $SCM_MODE == "teamware" ]]; then
+ comments_from_teamware $fmt $pp $p
+ elif [[ $SCM_MODE == "mercurial" ]]; then
+ comments_from_mercurial $fmt $pp $p
+ fi
+ fi
+}
+
+#
+# printCI <total-changed> <inserted> <deleted> <modified> <unchanged>
+#
+# Print out Code Inspection figures similar to sccs-prt(1) format.
+#
+function printCI
+{
+ integer tot=$1 ins=$2 del=$3 mod=$4 unc=$5
+ typeset str
+ if (( tot == 1 )); then
+ str="line"
+ else
+ str="lines"
+ fi
+ printf '%d %s changed: %d ins; %d del; %d mod; %d unchg' \
+ $tot $str $ins $del $mod $unc
+}
+
+
+#
+# difflines <oldfile> <newfile>
+#
+# Calculate and emit number of added, removed, modified and unchanged lines,
+# and total lines changed, the sum of added + removed + modified.
+#
+function difflines
+{
+ integer tot mod del ins unc err
+ typeset filename
+
+ eval $( diff -e $1 $2 | $AWK '
+ # Change range of lines: N,Nc
+ /^[0-9]*,[0-9]*c$/ {
+ n=split(substr($1,1,length($1)-1), counts, ",");
+ if (n != 2) {
+ error=2
+ exit;
+ }
+ #
+ # 3,5c means lines 3 , 4 and 5 are changed, a total of 3 lines.
+ # following would be 5 - 3 = 2! Hence +1 for correction.
+ #
+ r=(counts[2]-counts[1])+1;
+
+ #
+ # Now count replacement lines: each represents a change instead
+ # of a delete, so increment c and decrement r.
+ #
+ while (getline != /^\.$/) {
+ c++;
+ r--;
+ }
+ #
+ # If there were more replacement lines than original lines,
+ # then r will be negative; in this case there are no deletions,
+ # but there are r changes that should be counted as adds, and
+ # since r is negative, subtract it from a and add it to c.
+ #
+ if (r < 0) {
+ a-=r;
+ c+=r;
+ }
+
+ #
+ # If there were more original lines than replacement lines, then
+ # r will be positive; in this case, increment d by that much.
+ #
+ if (r > 0) {
+ d+=r;
+ }
+ next;
+ }
+
+ # Change lines: Nc
+ /^[0-9].*c$/ {
+ # The first line is a replacement; any more are additions.
+ if (getline != /^\.$/) {
+ c++;
+ while (getline != /^\.$/) a++;
+ }
+ next;
+ }
+
+ # Add lines: both Na and N,Na
+ /^[0-9].*a$/ {
+ while (getline != /^\.$/) a++;
+ next;
+ }
+
+ # Delete range of lines: N,Nd
+ /^[0-9]*,[0-9]*d$/ {
+ n=split(substr($1,1,length($1)-1), counts, ",");
+ if (n != 2) {
+ error=2
+ exit;
+ }
+ #
+ # 3,5d means lines 3 , 4 and 5 are deleted, a total of 3 lines.
+ # following would be 5 - 3 = 2! Hence +1 for correction.
+ #
+ r=(counts[2]-counts[1])+1;
+ d+=r;
+ next;
+ }
+
+ # Delete line: Nd. For example 10d says line 10 is deleted.
+ /^[0-9]*d$/ {d++; next}
+
+ # Should not get here!
+ {
+ error=1;
+ exit;
+ }
+
+ # Finish off - print results
+ END {
+ printf("tot=%d;mod=%d;del=%d;ins=%d;err=%d\n",
+ (c+d+a), c, d, a, error);
+ }' )
+
+ # End of $AWK, Check to see if any trouble occurred.
+ if (( $? > 0 || err > 0 )); then
+ print "Unexpected Error occurred reading" \
+ "\`diff -e $1 $2\`: \$?=$?, err=" $err
+ return
+ fi
+
+ # Accumulate totals
+ (( TOTL += tot ))
+ (( TMOD += mod ))
+ (( TDEL += del ))
+ (( TINS += ins ))
+ # Calculate unchanged lines
+ unc=`wc -l < $1`
+ if (( unc > 0 )); then
+ (( unc -= del + mod ))
+ (( TUNC += unc ))
+ fi
+ # print summary
+ print "<span class=\"lineschanged\">\c"
+ printCI $tot $ins $del $mod $unc
+ print "</span>"
+}
+
+
+#
+# flist_from_wx
+#
+# Sets up webrev to source its information from a wx-formatted file.
+# Sets the global 'wxfile' variable.
+#
+function flist_from_wx
+{
+ typeset argfile=$1
+ if [[ -n ${argfile%%/*} ]]; then
+ #
+ # If the wx file pathname is relative then make it absolute
+ # because the webrev does a "cd" later on.
+ #
+ wxfile=$PWD/$argfile
+ else
+ wxfile=$argfile
+ fi
+
+ $AWK '{ c = 1; print;
+ while (getline) {
+ if (NF == 0) { c = -c; continue }
+ if (c > 0) print
+ }
+ }' $wxfile > $FLIST
+
+ print " Done."
+}
+
+#
+# flist_from_teamware [ <args-to-putback-n> ]
+#
+# Generate the file list by extracting file names from a putback -n. Some
+# names may come from the "update/create" messages and others from the
+# "currently checked out" warning. Renames are detected here too. Extract
+# values for CODEMGR_WS and CODEMGR_PARENT from the output of the putback
+# -n as well, but remove them if they are already defined.
+#
+function flist_from_teamware
+{
+ if [[ -n $codemgr_parent ]]; then
+ if [[ ! -d $codemgr_parent/Codemgr_wsdata ]]; then
+ print -u2 "parent $codemgr_parent doesn't look like a" \
+ "valid teamware workspace"
+ exit 1
+ fi
+ parent_args="-p $codemgr_parent"
+ fi
+
+ print " File list from: 'putback -n $parent_args $*' ... \c"
+
+ putback -n $parent_args $* 2>&1 |
+ $AWK '
+ /^update:|^create:/ {print $2}
+ /^Parent workspace:/ {printf("CODEMGR_PARENT=%s\n",$3)}
+ /^Child workspace:/ {printf("CODEMGR_WS=%s\n",$3)}
+ /^The following files are currently checked out/ {p = 1; next}
+ NF == 0 {p=0 ; next}
+ /^rename/ {old=$3}
+ $1 == "to:" {print $2, old}
+ /^"/ {next}
+ p == 1 {print $1}' |
+ sort -r -k 1,1 -u | sort > $FLIST
+
+ print " Done."
+}
+
+function outgoing_from_mercurial_forest
+{
+ hg foutgoing --template 'rev: {rev}\n' $OUTPWS | $FILTER | $AWK '
+ BEGIN {ntree=0}
+ /^comparing/ {next}
+ /^no changes/ {next}
+ /^searching/ {next}
+ /^\[.*\]$/ {tree=substr($1,2,length($1)-2);
+ trees[ntree++] = tree;
+ revs[tree]=-1;
+ next}
+ /^rev:/ {rev=$2+0;
+ if (revs[tree] == -1 || rev < revs[tree])
+ { revs[tree] = rev; };
+ next;}
+ END {for (tree in trees)
+ { rev=revs[trees[tree]];
+ if (rev > 0)
+ {printf("%s %d\n",trees[tree],rev-1)}
+ }}' | while read LINE
+ do
+ set - $LINE
+ TREE=$1
+ REV=$2
+ A=`hg -R $CWS/$TREE log --rev $REV --template '{node}'`
+ FSTAT_OPT="--rev $A"
+ print "Revision: $A $REV" >> $FLIST
+ treestatus $TREE
+ done
+}
+
+function flist_from_mercurial_forest
+{
+ rm -f $FLIST
+ if [ -z "$Nflag" ]; then
+ print " File list from hg foutgoing $PWS ..."
+ outgoing_from_mercurial_forest
+ HG_LIST_FROM_COMMIT=1
+ fi
+ if [ ! -f $FLIST ]; then
+ # hg commit hasn't been run see what is lying around
+ print "\n No outgoing, perhaps you haven't commited."
+ print " File list from hg fstatus -mard ...\c"
+ FSTAT_OPT=
+ fstatus
+ HG_LIST_FROM_COMMIT=0
+ fi
+ print " Done."
+}
+
+#
+# Used when dealing with the result of 'hg foutgoing'
+# When now go down the tree and generate the change list
+#
+function treestatus
+{
+ TREE=$1
+ HGCMD="hg -R $CWS/$TREE status $FSTAT_OPT"
+
+ $HGCMD -mdn 2>/dev/null | $FILTER | while read F
+ do
+ echo $TREE/$F
+ done >> $FLIST
+
+ # Then all the added files
+ # But some of these could have been "moved" or renamed ones
+ # so let's make sure we get the proper info
+ # hg status -aC will produce something like:
+ # A subdir/File3
+ # A subdir/File4
+ # File4
+ # A subdir/File5
+ # The first and last are simple addition while the middle one
+ # is a move/rename
+
+ $HGCMD -aC | $FILTER | while read LINE; do
+ ldone=""
+ while [ -z "$ldone" ]; do
+ ldone="1"
+ set - $LINE
+ if [ $# -eq 2 -a "$1" == "A" ]; then
+ AFILE=$2
+ if read LINE2; then
+ set - $LINE2
+ if [ $# -eq 1 ]; then
+ echo $TREE/$AFILE $TREE/$1 >>$FLIST
+ elif [ $# -eq 2 ]; then
+ echo $TREE/$AFILE >>$FLIST
+ LINE=$LINE2
+ ldone=""
+ fi
+ else
+ echo $TREE/$AFILE >>$FLIST
+ fi
+ fi
+ done
+ done
+ $HGCMD -rn | $FILTER | while read RFILE; do
+ grep "$TREE/$RFILE" $FLIST >/dev/null
+ if [ $? -eq 1 ]; then
+ echo $TREE/$RFILE >>$FLIST
+ fi
+ done
+}
+
+function fstatus
+{
+ #
+ # forest extension is still being changed. For instance the output
+ # of fstatus used to no prepend the tree path to filenames, but
+ # this has changed recently. AWK code below does try to handle both
+ # cases
+ #
+ hg fstatus -mdn $FSTAT_OPT 2>/dev/null | $FILTER | $AWK '
+ /^\[.*\]$/ {tree=substr($1,2,length($1)-2); next}
+ $1 != "" {n=index($1,tree);
+ if (n == 0)
+ { printf("%s/%s\n",tree,$1)}
+ else
+ { printf("%s\n",$1)}}' >> $FLIST
+
+ #
+ # There is a bug in the output of fstatus -aC on recent versions: it
+ # inserts a space between the name of the tree and the filename of the
+ # old file. e.g.:
+ #
+ # $ hg fstatus -aC
+ # [.]
+ #
+ # [MyWS]
+ # A MyWS/subdir/File2
+ # MyWS/ File2
+ #
+ # [MyWS2]
+ #
+
+ hg fstatus -aC $FSTAT_OPT 2>/dev/null | $FILTER | $AWK '
+ /^\[.*\]$/ {tree=substr($1,2,length($1)-2); next}
+ /^A .*/ {n=index($2,tree);
+ if (n == 0)
+ { printf("A %s/%s\n",tree,$2)}
+ else
+ { printf("A %s\n",$2)};
+ next}
+ /^ / {n=index($1,tree);
+ if (n == 0)
+ { printf("%s/%s\n",tree,$1)}
+ else
+ { if (NF == 2)
+ printf("%s/%s\n",tree,$2)
+ else
+ printf("%s\n",$1)
+ };
+ next}
+ ' | while read LINE; do
+ ldone=""
+ while [ -z "$ldone" ]; do
+ ldone="1"
+ set - $LINE
+ if [ $# -eq 2 -a "$1" == "A" ]; then
+ AFILE=$2
+ if read LINE2; then
+ set - $LINE2
+ if [ $# -eq 1 ]; then
+ echo $AFILE $1 >>$FLIST
+ elif [ $# -eq 2 ]; then
+ echo $AFILE >>$FLIST
+ LINE=$LINE2
+ ldone=""
+ fi
+ else
+ echo $AFILE >>$FLIST
+ fi
+ fi
+ done
+ done
+ hg fstatus -rn $FSTAT_OPT 2>/dev/null | $FILTER | $AWK '
+ /^\[.*\]$/ {tree=substr($1,2,length($1)-2); next}
+ $1 != "" {n=index($1,tree);
+ if (n == 0)
+ { printf("%s/%s\n",tree,$1)}
+ else
+ { printf("%s\n",$1)}}' | while read RFILE; do
+ grep "$RFILE" $FLIST >/dev/null
+ if [ $? -eq 1 ]; then
+ echo $RFILE >>$FLIST
+ fi
+ done
+}
+
+#
+# flist_from_mercurial $PWS
+#
+# Only local file based repositories are supported at present
+# since even though we can determine the list from the parent finding
+# the changes is harder.
+#
+# We first look for any outgoing files, this is for when the user has
+# run hg commit. If we don't find any then we look with hg status.
+#
+# We need at least one of default-push or default paths set in .hg/hgrc
+# If neither are set we don't know who to compare with.
+
+function flist_from_mercurial
+{
+# if [ "${PWS##ssh://}" != "$PWS" -o \
+# "${PWS##http://}" != "$PWS" -o \
+# "${PWS##https://}" != "$PWS" ]; then
+# print "Remote Mercurial repositories not currently supported."
+# print "Set default and/or default-push to a local repository"
+# exit
+# fi
+ if [[ -n $forestflag ]]; then
+ HG_LIST_FROM_COMMIT=
+ flist_from_mercurial_forest
+ else
+ STATUS_REV=
+ if [[ -n $rflag ]]; then
+ STATUS_REV="--rev $PARENT_REV"
+ elif [[ -n $OUTREV ]]; then
+ STATUS_REV="--rev $OUTREV"
+ else
+ # hg commit hasn't been run see what is lying around
+ print "\n No outgoing, perhaps you haven't commited."
+ fi
+ # First let's list all the modified or deleted files
+
+ hg status $STATUS_REV -mdn | $FILTER > $FLIST
+
+ # Then all the added files
+ # But some of these could have been "moved" or renamed ones
+ # so let's make sure we get the proper info
+ # hg status -aC will produce something like:
+ # A subdir/File3
+ # A subdir/File4
+ # File4
+ # A subdir/File5
+ # The first and last are simple addition while the middle one
+ # is a move/rename
+
+ hg status $STATUS_REV -aC | $FILTER >$FLIST.temp
+ while read LINE; do
+ ldone=""
+ while [ -z "$ldone" ]; do
+ ldone="1"
+ set - $LINE
+ if [ $# -eq 2 -a "$1" == "A" ]; then
+ AFILE=$2
+ if read LINE2; then
+ set - $LINE2
+ if [ $# -eq 1 ]; then
+ echo $AFILE $1 >>$FLIST
+ elif [ $# -eq 2 ]; then
+ echo $AFILE >>$FLIST
+ LINE=$LINE2
+ ldone=""
+ fi
+ else
+ echo $AFILE >>$FLIST
+ fi
+ fi
+ done
+ done < $FLIST.temp
+ hg status $STATUS_REV -rn | $FILTER > $FLIST.temp
+ while read RFILE; do
+ grep "$RFILE" $FLIST >/dev/null
+ if [ $? -eq 1 ]; then
+ echo $RFILE >>$FLIST
+ fi
+ done < $FLIST.temp
+ rm -f $FLIST.temp
+ fi
+}
+
+function env_from_flist
+{
+ [[ -r $FLIST ]] || return
+
+ #
+ # Use "eval" to set env variables that are listed in the file
+ # list. Then copy those into our local versions of those
+ # variables if they have not been set already.
+ #
+ eval `sed -e "s/#.*$//" $FLIST | grep = `
+
+ [[ -z $codemgr_ws && -n $CODEMGR_WS ]] && codemgr_ws=$CODEMGR_WS
+
+ #
+ # Check to see if CODEMGR_PARENT is set in the flist file.
+ #
+ [[ -z $codemgr_parent && -n $CODEMGR_PARENT ]] && \
+ codemgr_parent=$CODEMGR_PARENT
+}
+
+#
+# detect_scm
+#
+# We dynamically test the SCM type; this allows future extensions to
+# new SCM types
+#
+function detect_scm
+{
+ #
+ # If CODEMGR_WS is specified in the flist file, we assume teamware.
+ #
+ if [[ -r $FLIST ]]; then
+ egrep '^CODEMGR_WS=' $FLIST > /dev/null 2>&1
+ if [[ $? -eq 0 ]]; then
+ print "teamware"
+ return
+ fi
+ fi
+
+ #
+ # The presence of $CODEMGR_WS and a Codemgr_wsdata directory
+ # is our clue that this is a teamware workspace.
+ # Same if true if current directory has a Codemgr_wsdata sub-dir
+ #
+ if [[ -z "$CODEMGR_WS" ]]; then
+ CODEMGR_WS=`workspace name 2>/dev/null`
+ fi
+
+ if [[ -n $CODEMGR_WS && -d "$CODEMGR_WS/Codemgr_wsdata" ]]; then
+ print "teamware"
+ elif [[ -d $PWD/Codemgr_wsdata ]]; then
+ print "teamware"
+ elif hg root >/dev/null ; then
+ print "mercurial"
+ else
+ print "unknown"
+ fi
+}
+
+#
+# Extract the parent workspace from the Codemgr_wsdata/parent file
+#
+function parent_from_teamware
+{
+ if [[ -f "$1/Codemgr_wsdata/parent" ]]; then
+ tail -1 "$1/Codemgr_wsdata/parent"
+ fi
+}
+
+function look_for_prog
+{
+ typeset path
+ typeset ppath
+ typeset progname=$1
+
+ DEVTOOLS=
+ OS=`uname`
+ if [[ "$OS" == "SunOS" ]]; then
+ DEVTOOLS="/java/devtools/`uname -p`/bin"
+ elif [[ "$OS" == "Linux" ]]; then
+ DEVTOOLS="/java/devtools/linux/bin"
+ fi
+
+ ppath=$PATH
+ ppath=$ppath:/usr/sfw/bin:/usr/bin:/usr/sbin
+ ppath=$ppath:/opt/teamware/bin:/opt/onbld/bin
+ ppath=$ppath:/opt/onbld/bin/`uname -p`
+ ppath=$ppath:/java/devtools/share/bin:$DEVTOOLS
+
+ PATH=$ppath prog=`whence $progname`
+ if [[ -n $prog ]]; then
+ print $prog
+ fi
+}
+
+function build_old_new_teamware
+{
+ # If the child's version doesn't exist then
+ # get a readonly copy.
+
+ if [[ ! -f $F && -f SCCS/s.$F ]]; then
+ $SCCS get -s $F
+ fi
+
+ #
+ # Snag new version of file.
+ #
+ rm -f $newdir/$DIR/$F
+ cp $F $newdir/$DIR/$F
+
+ #
+ # Get the parent's version of the file. First see whether the
+ # child's version is checked out and get the parent's version
+ # with keywords expanded or unexpanded as appropriate.
+ #
+ if [ -f $PWS/$PDIR/SCCS/s.$PF -o \
+ -f $PWS/$PDIR/SCCS/p.$PF ]; then
+ rm -f $olddir/$PDIR/$PF
+ if [ -f SCCS/p.$F ]; then
+ $SCCS get -s -p -k $PWS/$PDIR/$PF \
+ > $olddir/$PDIR/$PF
+ else
+ $SCCS get -s -p $PWS/$PDIR/$PF \
+ > $olddir/$PDIR/$PF
+ fi
+ else
+ if [[ -f $PWS/$PDIR/$PF ]]; then
+ # Parent is not a real workspace, but just a raw
+ # directory tree - use the file that's there as
+ # the old file.
+
+ rm -f $olddir/$DIR/$F
+ cp $PWS/$PDIR/$PF $olddir/$DIR/$F
+ fi
+ fi
+}
+
+#
+# Find the parent for $1
+#
+function find_outrev
+{
+ crev=$1
+ prev=`hg log -r $crev --template '{parents}\n'`
+ if [[ -z "$prev" ]]
+ then
+ # No specific parent means previous changeset is parent
+ prev=`expr $crev - 1`
+ else
+ # Format is either of the following two:
+ # 546:7df6fcf1183b
+ # 548:16f1915bb5cd 547:ffaa4e775815
+ prev=`echo $prev | sed -e 's/\([0-9]*\):.*/\1/'`
+ fi
+ print $prev
+}
+
+function extract_ssh_infos
+{
+ CMD=$1
+ if expr "$CMD" : 'ssh://[^/]*@' >/dev/null; then
+ ssh_user=`echo $CMD | sed -e 's/ssh:\/\/\(.*\)@.*/\1/'`
+ ssh_host=`echo $CMD | sed -e 's/ssh:\/\/.*@\([^/]*\)\/.*/\1/'`
+ ssh_dir=`echo $CMD | sed -e 's/ssh:\/\/.*@[^/]*\/\(.*\)/\1/'`
+ else
+ ssh_user=
+ ssh_host=`echo $CMD | sed -e 's/ssh:\/\/\([^/]*\)\/.*/\1/'`
+ ssh_dir=`echo $CMD | sed -e 's/ssh:\/\/[^/]*\/\(.*\)/\1/'`
+ fi
+
+}
+
+function build_old_new_mercurial
+{
+ olddir=$1
+ newdir=$2
+ DIR=$3
+ F=$4
+ #
+ # new version of the file.
+ #
+ rm -rf $newdir/$DIR/$F
+ if [ -f $F ]; then
+ cp $F $newdir/$DIR/$F
+ fi
+
+ #
+ # Old version of the file.
+ #
+ rm -rf $olddir/$DIR/$F
+
+ if [ -n "$PWS" ]; then
+ if expr "$PWS" : 'ssh://' >/dev/null
+ then
+ extract_ssh_infos $PWS
+ if [ -n "$ssh_user" ]; then
+ parent="ssh -l $ssh_user $ssh_host hg -R $ssh_dir --cwd $ssh_dir"
+ else
+ parent="ssh $ssh_host hg -R $ssh_dir --cwd $ssh_dir"
+ fi
+ else
+ parent="hg -R $PWS --cwd $PWS"
+ fi
+ else
+ parent=""
+ fi
+
+ if [ -z "$rename" ]; then
+ if [ -n "$rflag" ]; then
+ parentrev=$PARENT_REV
+ elif [ "$HG_LIST_FROM_COMMIT" -eq 1 ]; then
+ parentrev=$OUTREV
+ else
+ if [[ -n $HG_BRANCH ]]; then
+ parentrev=$HG_BRANCH
+ else
+ parentrev="tip"
+ fi
+ fi
+
+ if [ -n "$parentrev" ]; then
+ if [ -z "$parent" ]; then
+ hg cat --rev $parentrev --output $olddir/$DIR/$F $F 2>/dev/null
+ else
+ # when specifying a workspace we have to provide
+ # the full path
+ $parent cat --rev $parentrev --output $olddir/$DIR/$F $DIR/$F 2>/dev/null
+ fi
+ fi
+ else
+ # It's a rename (or a move), so let's make sure we move
+ # to the right directory first, then restore it once done
+ current_dir=`pwd`
+ cd $CWS/$PDIR
+ if [ -n "$rflag" ]; then
+ parentrev=$PARENT_REV
+ elif [ "$HG_LIST_FROM_COMMIT" -eq 1 ]; then
+ parentrev=$OUTREV
+ fi
+ if [ -z "$parentrev" ]; then
+ parentrev=`hg log -l1 $PF | $AWK -F: '/changeset/ {print $2}'`
+ fi
+ if [ -n "$parentrev" ]; then
+ mkdir -p $olddir/$PDIR
+ if [ -z "$parent" ]; then
+ hg cat --rev $parentrev --output $olddir/$PDIR/$PF $PF 2>/dev/null
+ else
+ $parent cat --rev $parentrev --output $olddir/$PDIR/$PF $PDIR/$PF 2>/dev/null
+ fi
+ fi
+ cd $current_dir
+ fi
+}
+
+function build_old_new
+{
+ if [[ $SCM_MODE == "teamware" ]]; then
+ build_old_new_teamware $@
+ fi
+
+ if [[ $SCM_MODE == "mercurial" ]]; then
+ build_old_new_mercurial $@
+ fi
+}
+
+
+#
+# Usage message.
+#
+function usage
+{
+ print "Usage:\twebrev [common-options]
+ webrev [common-options] ( <file> | - )
+ webrev [common-options] -w <wx file>
+ webrev [common-options] -l [arguments to 'putback']
+
+Options:
+ -v: Print the version of this tool.
+ -b: Do not ignore changes in the amount of white space.
+ -c <CR#>: Include link to CR (aka bugid) in the main page.
+ -O: Print bugids/arc cases suitable for OpenJDK.
+ -i <filename>: Include <filename> in the index.html file.
+ -o <outdir>: Output webrev to specified directory.
+ -p <compare-against>: Use specified parent wkspc or basis for comparison
+ -w <wxfile>: Use specified wx active file.
+ -u <username>: Use that username instead of 'guessing' one.
+ -m: Forces the use of Mercurial
+ -t: Forces the use of Teamware
+
+Mercurial only options:
+ -r rev: Compare against a specified revision
+ -N: Skip 'hg outgoing', use only 'hg status'
+ -f: Use the forest extension
+
+Environment:
+ WDIR: Control the output directory.
+ WEBREV_BUGURL: Control the URL prefix for bugids.
+ WEBREV_SACURL: Control the URL prefix for ARC cases.
+
+SCM Environment:
+ Teamware: CODEMGR_WS: Workspace location.
+ Teamware: CODEMGR_PARENT: Parent workspace location.
+
+"
+
+ exit 2
+}
+
+#
+#
+# Main program starts here
+#
+#
+LANG="C"
+LC_ALL="C"
+export LANG LC_ALL
+trap "rm -f /tmp/$$.* ; exit" 0 1 2 3 15
+
+set +o noclobber
+
+[[ -z $WDIFF ]] && WDIFF=`look_for_prog wdiff`
+[[ -z $WX ]] && WX=`look_for_prog wx`
+[[ -z $CODEREVIEW ]] && CODEREVIEW=`look_for_prog codereview`
+[[ -z $PS2PDF ]] && PS2PDF=`look_for_prog ps2pdf`
+[[ -z $PERL ]] && PERL=`look_for_prog perl`
+[[ -z $SCCS ]] && SCCS=`look_for_prog sccs`
+[[ -z $AWK ]] && AWK=`look_for_prog nawk`
+[[ -z $AWK ]] && AWK=`look_for_prog gawk`
+[[ -z $AWK ]] && AWK=`look_for_prog awk`
+[[ -z $WSPACE ]] && WSPACE=`look_for_prog workspace`
+[[ -z $JAR ]] && JAR=`look_for_prog jar`
+[[ -z $ZIP ]] && ZIP=`look_for_prog zip`
+[[ -z $GETENT ]] && GETENT=`look_for_prog getent`
+[[ -z $WGET ]] && WGET=`look_for_prog wget`
+
+if uname | grep CYGWIN >/dev/null
+then
+ ISWIN=1
+ # Under windows mercurial outputs '\' instead of '/'
+ FILTER="tr '\\\\' '/'"
+else
+ FILTER="cat"
+fi
+
+if [[ ! -x $PERL ]]; then
+ print -u2 "Error: No perl interpreter found. Exiting."
+ exit 1
+fi
+
+#
+# These aren't fatal, but we want to note them to the user.
+# We don't warn on the absence of 'wx' until later when we've
+# determined that we actually need to try to invoke it.
+#
+# [[ ! -x $CODEREVIEW ]] && print -u2 "WARNING: codereview(1) not found."
+# [[ ! -x $PS2PDF ]] && print -u2 "WARNING: ps2pdf(1) not found."
+# [[ ! -x $WDIFF ]] && print -u2 "WARNING: wdiff not found."
+
+# Declare global total counters.
+integer TOTL TINS TDEL TMOD TUNC
+
+flist_mode=
+flist_file=
+bflag=
+iflag=
+oflag=
+pflag=
+uflag=
+lflag=
+wflag=
+Oflag=
+rflag=
+Nflag=
+forestflag=
+while getopts "c:i:o:p:r:u:lmtwONvfb" opt
+do
+ case $opt in
+ b) bflag=1;;
+
+ i) iflag=1
+ INCLUDE_FILE=$OPTARG;;
+
+ o) oflag=1
+ WDIR=$OPTARG;;
+
+ p) pflag=1
+ codemgr_parent=$OPTARG;;
+
+ u) uflag=1
+ username=$OPTARG;;
+
+ c) if [[ -z $CRID ]]; then
+ CRID=$OPTARG
+ else
+ CRID="$CRID $OPTARG"
+ fi;;
+
+ m) SCM_MODE="mercurial";;
+
+ t) SCM_MODE="teamware";;
+
+ #
+ # If -l has been specified, we need to abort further options
+ # processing, because subsequent arguments are going to be
+ # arguments to 'putback -n'.
+ #
+ l) lflag=1
+ break;;
+
+ w) wflag=1;;
+
+ O) Oflag=1;;
+
+ N) Nflag=1;;
+
+ f) forestflag=1;;
+
+ r) rflag=1
+ PARENT_REV=$OPTARG;;
+
+ v) print "$0 version: $WEBREV_UPDATED";;
+
+
+ ?) usage;;
+ esac
+done
+
+FLIST=/tmp/$$.flist
+
+if [[ -n $wflag && -n $lflag ]]; then
+ usage
+fi
+
+if [[ -n $forestflag && -n $rflag ]]; then
+ print "The -r <rev> flag is incompatible with the use of forests"
+ exit 2
+fi
+
+#
+# If this manually set as the parent, and it appears to be an earlier webrev,
+# then note that fact and set the parent to the raw_files/new subdirectory.
+#
+if [[ -n $pflag && -d $codemgr_parent/raw_files/new ]]; then
+ parent_webrev="$codemgr_parent"
+ codemgr_parent="$codemgr_parent/raw_files/new"
+fi
+
+if [[ -z $wflag && -z $lflag ]]; then
+ shift $(($OPTIND - 1))
+
+ if [[ $1 == "-" ]]; then
+ cat > $FLIST
+ flist_mode="stdin"
+ flist_done=1
+ shift
+ elif [[ -n $1 ]]; then
+ if [[ ! -r $1 ]]; then
+ print -u2 "$1: no such file or not readable"
+ usage
+ fi
+ cat $1 > $FLIST
+ flist_mode="file"
+ flist_file=$1
+ flist_done=1
+ shift
+ else
+ flist_mode="auto"
+ fi
+fi
+
+#
+# Before we go on to further consider -l and -w, work out which SCM we think
+# is in use.
+#
+if [[ -z $SCM_MODE ]]; then
+ SCM_MODE=`detect_scm $FLIST`
+fi
+if [[ $SCM_MODE == "unknown" ]]; then
+ print -u2 "Unable to determine SCM type currently in use."
+ print -u2 "For teamware: webrev looks for \$CODEMGR_WS either in"
+ print -u2 " the environment or in the file list."
+ print -u2 "For mercurial: webrev runs 'hg root'."
+ exit 1
+fi
+
+print -u2 " SCM detected: $SCM_MODE"
+
+
+if [[ $SCM_MODE == "mercurial" ]]; then
+ #
+ # determine Workspace and parent workspace paths
+ #
+ CWS=`hg root | $FILTER`
+ if [[ -n $pflag && -z "$PWS" ]]; then
+ OUTPWS=$codemgr_parent
+ # Let's try to expand it if it's an alias defined in [paths]
+ tmp=`hg path $OUTPWS 2>/dev/null | $FILTER`
+ if [[ -n $tmp ]]; then
+ OUTPWS="$tmp"
+ fi
+ if [[ -n $rflag ]]; then
+ if expr "$codemgr_parent" : 'ssh://.*' >/dev/null; then
+ PWS=$codemgr_parent
+ else
+ PWS=`hg -R "$codemgr_parent" root 2>/dev/null | $FILTER`
+ fi
+ fi
+ fi
+ #
+ # OUTPWS is the parent repository to use when using 'hg outgoing'
+ #
+ if [[ -z $Nflag ]]; then
+ if [[ -n $forestflag ]]; then
+ #
+ # for forest we have to rely on properly set default and
+ # default-push because they can be different from the top one.
+ # unless of course it was explicitely speficied with -p
+ if [[ -z $pflag ]]; then
+ OUTPWS=
+ fi
+ else
+ #
+ # Unfortunately mercurial is bugged and doesn't handle
+ # aliases correctly in 'hg path default'
+ # So let's do it ourselves. Sigh...
+ if [[ -z "$OUTPWS" ]]; then
+ OUTPWS=`grep default-push $CWS/.hg/hgrc | $AWK '{print $3}' | $FILTER`
+ fi
+ # Still empty, means no default-push
+ if [[ -z "$OUTPWS" ]]; then
+ OUTPWS=`grep 'default =' $CWS/.hg/hgrc | $AWK '{print $3}' | $FILTER`
+ fi
+ # Let's try to expand it if it's an alias defined in [paths]
+ tmp=`hg path $OUTPWS 2>/dev/null | $FILTER`
+ if [[ -n $tmp ]]; then
+ OUTPWS="$tmp"
+ fi
+ fi
+ fi
+ #
+ # OUTPWS may contain username:password, let's make sure we remove the
+ # sensitive information before we print out anything in the HTML
+ #
+ OUTPWS2=$OUTPWS
+ if [[ -n $OUTPWS ]]; then
+ if [[ `expr "$OUTPWS" : '.*://[^/]*@.*'` -gt 0 ]]; then
+ # Remove everything between '://' and '@'
+ OUTPWS2=`echo $OUTPWS | sed -e 's/\(.*:\/\/\).*@\(.*\)/\1\2/'`
+ fi
+ fi
+
+ if [[ -z $HG_BRANCH ]]; then
+ HG_BRANCH=`hg branch`
+ if [ "$HG_BRANCH" == "default" ]; then
+ #
+ # 'default' means no particular branch, so let's cancel that
+ #
+ HG_BRANCH=
+ fi
+ fi
+
+ if [[ -z $forestflag ]]; then
+ if [[ -z $Nflag ]]; then
+ #
+ # If no "-N", always do "hg outgoing" against parent
+ # repository to determine list of outgoing revisions.
+ #
+ ALL_CREV=`hg outgoing -q --template '{rev}\n' $OUTPWS | sort -n`
+ if [[ -n $ALL_CREV ]]; then
+ FIRST_CREV=`echo "$ALL_CREV" | head -1`
+ #
+ # If no "-r", choose revision to compare against by
+ # finding the latest revision not in the outgoing list.
+ #
+ if [[ -z $rflag ]]; then
+ OUTREV=`find_outrev "$FIRST_CREV"`
+ if [[ -n $OUTREV ]]; then
+ HG_LIST_FROM_COMMIT=1
+ fi
+ fi
+ fi
+ elif [[ -n $rflag ]]; then
+ #
+ # If skipping "hg outgoing" but still comparing against a
+ # specific revision (not the tip), set revision for comment
+ # accumulation.
+ #
+ FIRST_CREV=`hg log --rev $PARENT_REV --template '{rev}'`
+ FIRST_CREV=`expr $FIRST_CREV + 1`
+ fi
+ fi
+ #Let's check if a merge is needed, if so, issue a warning
+ PREV=`hg parent | grep '^tag:.*tip$'`
+ if [[ -z $PREV ]]; then
+ print "WARNING: parent rev is not tip. Maybe an update or merge is needed"
+ fi
+fi
+
+if [[ -n $lflag ]]; then
+ #
+ # If the -l flag is given instead of the name of a file list,
+ # then generate the file list by extracting file names from a
+ # putback -n.
+ #
+ shift $(($OPTIND - 1))
+ if [[ $SCM_MODE == "teamware" ]]; then
+ flist_from_teamware "$*"
+ elif [[ $SCM_MODE == "mercurial" ]]; then
+ flist_from_mercurial
+ fi
+ flist_done=1
+ shift $#
+
+elif [[ -n $wflag ]]; then
+ #
+ # If the -w is given then assume the file list is in Bonwick's "wx"
+ # command format, i.e. pathname lines alternating with SCCS comment
+ # lines with blank lines as separators. Use the SCCS comments later
+ # in building the index.html file.
+ #
+ shift $(($OPTIND - 1))
+ wxfile=$1
+ if [[ -z $wxfile && -n $CODEMGR_WS ]]; then
+ if [[ -r $CODEMGR_WS/wx/active ]]; then
+ wxfile=$CODEMGR_WS/wx/active
+ fi
+ fi
+
+ [[ -z $wxfile ]] && print -u2 "wx file not specified, and could not " \
+ "be auto-detected (check \$CODEMGR_WS)" && exit 1
+
+ print -u2 " File list from: wx 'active' file '$wxfile' ... \c"
+ flist_from_wx $wxfile
+ flist_done=1
+ if [[ -n "$*" ]]; then
+ shift
+ fi
+elif [[ $flist_mode == "stdin" ]]; then
+ print -u2 " File list from: standard input"
+elif [[ $flist_mode == "file" ]]; then
+ print -u2 " File list from: $flist_file"
+fi
+
+if [[ $# -gt 0 ]]; then
+ print -u2 "WARNING: unused arguments: $*"
+fi
+
+if [[ $SCM_MODE == "teamware" ]]; then
+ #
+ # Parent (internally $codemgr_parent) and workspace ($codemgr_ws) can
+ # be set in a number of ways, in decreasing precedence:
+ #
+ # 1) on the command line (only for the parent)
+ # 2) in the user environment
+ # 3) in the flist
+ # 4) automatically based on the workspace (only for the parent)
+ #
+
+ #
+ # Here is case (2): the user environment
+ #
+ [[ -z $codemgr_ws && -n $CODEMGR_WS ]] && codemgr_ws=$CODEMGR_WS
+ [[ -z $codemgr_ws && -n $WSPACE ]] && codemgr_ws=`$WSPACE name`
+
+ if [[ -n $codemgr_ws && ! -d $codemgr_ws ]]; then
+ print -u2 "$codemgr_ws: no such workspace"
+ exit 1
+ fi
+
+ [[ -z $codemgr_parent && -n $CODEMGR_PARENT ]] && \
+ codemgr_parent=$CODEMGR_PARENT
+
+ if [[ -n $codemgr_parent && ! -d $codemgr_parent ]]; then
+ print -u2 "$codemgr_parent: no such directory"
+ exit 1
+ fi
+
+ #
+ # If we're in auto-detect mode and we haven't already gotten the file
+ # list, then see if we can get it by probing for wx.
+ #
+ if [[ -z $flist_done && $flist_mode == "auto" && -n $codemgr_ws ]]; then
+ if [[ ! -x $WX ]]; then
+ print -u2 "WARNING: wx not found!"
+ fi
+
+ #
+ # We need to use wx list -w so that we get renamed files, etc.
+ # but only if a wx active file exists-- otherwise wx will
+ # hang asking us to initialize our wx information.
+ #
+ if [[ -x $WX && -f $codemgr_ws/wx/active ]]; then
+ print -u2 " File list from: 'wx list -w' ... \c"
+ $WX list -w > $FLIST
+ $WX comments > /tmp/$$.wx_comments
+ wxfile=/tmp/$$.wx_comments
+ print -u2 "done"
+ flist_done=1
+ fi
+ fi
+
+ #
+ # If by hook or by crook we've gotten a file list by now (perhaps
+ # from the command line), eval it to extract environment variables from
+ # it: This is step (3).
+ #
+ env_from_flist
+
+ #
+ # Continuing step (3): If we still have no file list, we'll try to get
+ # it from teamware.
+ #
+ if [[ -z $flist_done ]]; then
+ flist_from_teamware
+ env_from_flist
+ fi
+
+ if [[ -z $codemgr_ws && -d $PWD/Codemgr_wsdata ]]; then
+ codemgr_ws=$PWD
+ fi
+ #
+ # Observe true directory name of CODEMGR_WS, as used later in
+ # webrev title.
+ #
+ if [[ -n $codemgr_ws ]]; then
+ codemgr_ws=$(cd $codemgr_ws;print $PWD)
+ fi
+
+ if [[ -n $codemgr_parent ]]; then
+ codemgr_parent=$(cd $codemgr_parent;print $PWD)
+ fi
+
+ #
+ # (4) If we still don't have a value for codemgr_parent, get it
+ # from workspace.
+ #
+ [[ -z $codemgr_parent && -n $WSPACE ]] && codemgr_parent=`$WSPACE parent`
+ [[ -z $codemgr_parent ]] && codemgr_parent=`parent_from_teamware $codemgr_ws`
+
+ if [[ ! -d $codemgr_parent ]]; then
+ print -u2 "$CODEMGR_PARENT: no such parent workspace"
+ exit 1
+ fi
+
+ #
+ # Reset CODEMGR_WS to make sure teamware commands are happy.
+ #
+ CODEMGR_WS=$codemgr_ws
+ CWS=$codemgr_ws
+ PWS=$codemgr_parent
+elif [[ $SCM_MODE == "mercurial" ]]; then
+ if [[ -z $flist_done ]]; then
+ flist_from_mercurial $PWS
+ fi
+fi
+
+#
+# If the user didn't specify a -i option, check to see if there is a
+# webrev-info file in the workspace directory.
+#
+if [[ -z $iflag && -r "$CWS/webrev-info" ]]; then
+ iflag=1
+ INCLUDE_FILE="$CWS/webrev-info"
+fi
+
+if [[ -n $iflag ]]; then
+ if [[ ! -r $INCLUDE_FILE ]]; then
+ print -u2 "include file '$INCLUDE_FILE' does not exist or is" \
+ "not readable."
+ exit 1
+ else
+ #
+ # $INCLUDE_FILE may be a relative path, and the script alters
+ # PWD, so we just stash a copy in /tmp.
+ #
+ cp $INCLUDE_FILE /tmp/$$.include
+ fi
+fi
+
+#
+# Output directory.
+#
+if [[ -z $WDIR ]]; then
+ WDIR=$CWS/webrev
+else
+ # If the output directory doesn't end with '/webrev' or '/webrev/'
+ # then add '/webrev'. This is for backward compatibility
+ if ! expr $WDIR : '.*/webrev/\?$' >/dev/null
+ then
+ WDIR=$WDIR/webrev
+ fi
+fi
+# WDIR=${WDIR:-$CWS/webrev}
+
+#
+# Name of the webrev, derived from the workspace name; in the
+# future this could potentially be an option.
+#
+# Let's keep what's after the last '/'
+WNAME=${CWS##*/}
+
+#
+# If WDIR doesn't start with '/' or 'x:' prepend the current dir
+#
+if [ ${WDIR%%/*} ]; then
+ if [[ -n $ISWIN ]]; then
+ if [ ${WDIR%%[A-Za-z]:*} ]; then
+ WDIR=$PWD/$WDIR
+ fi
+ else
+ WDIR=$PWD/$WDIR
+ fi
+fi
+
+if [[ ! -d $WDIR ]]; then
+ mkdir -p $WDIR
+ [[ $? != 0 ]] && exit 1
+fi
+
+#
+# Summarize what we're going to do.
+#
+print " Workspace: $CWS"
+if [[ -n $parent_webrev ]]; then
+ print "Compare against: webrev at $parent_webrev"
+elif [[ -n $OUTPWS2 ]]; then
+ print "Compare against: $OUTPWS2"
+fi
+if [[ -n $HG_BRANCH ]]; then
+ print " Branch: $HG_BRANCH"
+fi
+if [[ -n $rflag ]]; then
+ print "Compare against version: $PARENT_REV"
+fi
+[[ -n $INCLUDE_FILE ]] && print " Including: $INCLUDE_FILE"
+print " Output to: $WDIR"
+
+#
+# Save the file list in the webrev dir
+#
+[[ ! $FLIST -ef $WDIR/file.list ]] && cp $FLIST $WDIR/file.list
+
+#
+# Bug IDs will be replaced by a URL. Order of precedence
+# is: default location, $WEBREV_BUGURL, the -O flag.
+#
+BUGURL='http://monaco.sfbay.sun.com/detail.jsp?cr='
+[[ -n $WEBREV_BUGURL ]] && BUGURL="$WEBREV_BUGURL"
+[[ -n "$Oflag" ]] && \
+ BUGURL='http://bugs.sun.com/bugdatabase/view_bug.do?bug_id='
+
+#
+# Likewise, ARC cases will be replaced by a URL. Order of precedence
+# is: default, $WEBREV_SACURL, the -O flag.
+#
+# Note that -O also triggers different substitution behavior for
+# SACURL. See sac2url().
+#
+SACURL='http://sac.eng.sun.com'
+[[ -n $WEBREV_SACURL ]] && SACURL="$WEBREV_SACURL"
+[[ -n $Oflag ]] && \
+ SACURL='http://www.opensolaris.org/os/community/arc/caselog'
+
+rm -f $WDIR/$WNAME.patch
+rm -f $WDIR/$WNAME.ps
+rm -f $WDIR/$WNAME.pdf
+
+touch $WDIR/$WNAME.patch
+
+print " Output Files:"
+
+#
+# Clean up the file list: Remove comments, blank lines and env variables.
+#
+sed -e "s/#.*$//" -e "/=/d" -e "/^[ ]*$/d" $FLIST > /tmp/$$.flist.clean
+FLIST=/tmp/$$.flist.clean
+
+#
+# Clean up residual raw files
+#
+if [ -d $WDIR/raw_files ]; then
+ rm -rf $WDIR/raw_files 2>/dev/null
+fi
+
+#
+# Should we ignore changes in white spaces when generating diffs?
+#
+if [[ -n $bflag ]]; then
+ DIFFOPTS="-t"
+else
+ DIFFOPTS="-bt"
+fi
+#
+# First pass through the files: generate the per-file webrev HTML-files.
+#
+while read LINE
+do
+ set - $LINE
+ P=$1
+
+ if [[ $1 == "Revision:" ]]; then
+ OUTREV=$2
+ continue
+ fi
+ #
+ # Normally, each line in the file list is just a pathname of a
+ # file that has been modified or created in the child. A file
+ # that is renamed in the child workspace has two names on the
+ # line: new name followed by the old name.
+ #
+ oldname=""
+ oldpath=""
+ rename=
+ if [[ $# -eq 2 ]]; then
+ PP=$2 # old filename
+ oldname=" (was $PP)"
+ oldpath="$PP"
+ rename=1
+ PDIR=${PP%/*}
+ if [[ $PDIR == $PP ]]; then
+ PDIR="." # File at root of workspace
+ fi
+
+ PF=${PP##*/}
+
+ DIR=${P%/*}
+ if [[ $DIR == $P ]]; then
+ DIR="." # File at root of workspace
+ fi
+
+ F=${P##*/}
+ else
+ DIR=${P%/*}
+ if [[ "$DIR" == "$P" ]]; then
+ DIR="." # File at root of workspace
+ fi
+
+ F=${P##*/}
+
+ PP=$P
+ PDIR=$DIR
+ PF=$F
+ fi
+
+ # Make the webrev directory if necessary as it may have been
+ # removed because it was empty
+ if [ ! -d $CWS/$DIR ]; then
+ mkdir -p $CWS/$DIR
+ fi
+
+ COMM=`getcomments html $P $PP`
+
+ print "\t$P$oldname\n\t\t\c"
+
+ # Make the webrev mirror directory if necessary
+ mkdir -p $WDIR/$DIR
+
+ # cd to the directory so the names are short
+ cd $CWS/$DIR
+
+ #
+ # If we're in OpenSolaris mode, we enforce a minor policy:
+ # help to make sure the reviewer doesn't accidentally publish
+ # source which is in usr/closed/*
+ #
+ if [[ -n $Oflag ]]; then
+ pclosed=${P##usr/closed/}
+ if [[ $pclosed != $P ]]; then
+ print "*** Omitting closed source for OpenSolaris" \
+ "mode review"
+ continue
+ fi
+ fi
+
+ #
+ # We stash old and new files into parallel directories in /tmp
+ # and do our diffs there. This makes it possible to generate
+ # clean looking diffs which don't have absolute paths present.
+ #
+ olddir=$WDIR/raw_files/old
+ newdir=$WDIR/raw_files/new
+ mkdir -p $olddir
+ mkdir -p $newdir
+ mkdir -p $olddir/$PDIR
+ mkdir -p $newdir/$DIR
+
+ build_old_new $olddir $newdir $DIR $F
+
+ if [[ ! -f $F && ! -f $olddir/$DIR/$F ]]; then
+ print "*** Error: file not in parent or child"
+ continue
+ fi
+
+ cd $WDIR/raw_files
+ ofile=old/$PDIR/$PF
+ nfile=new/$DIR/$F
+
+ mv_but_nodiff=
+ cmp $ofile $nfile > /dev/null 2>&1
+ if [[ $? == 0 && $rename == 1 ]]; then
+ mv_but_nodiff=1
+ fi
+
+ #
+ # Cleaning up
+ #
+ rm -f $WDIR/$DIR/$F.cdiff.html
+ rm -f $WDIR/$DIR/$F.udiff.html
+ rm -f $WDIR/$DIR/$F.wdiff.html
+ rm -f $WDIR/$DIR/$F.sdiff.html
+ rm -f $WDIR/$DIR/$F-.html
+ rm -f $WDIR/$DIR/$F.html
+
+ its_a_jar=
+ if expr $F : '.*\.jar' >/dev/null; then
+ its_a_jar=1
+ # It's a JAR file, let's do it differntly
+ if [[ -z $JAR ]]; then
+ print "No access to jar, so can't produce diffs for jar files"
+ else
+ if [ -f $ofile ]; then
+ $JAR -tvf $ofile >"$ofile".lst
+ fi
+ if [ -f $nfile ]; then
+ $JAR -tvf $nfile >"$nfile".lst
+ fi
+
+ if [[ -f $ofile && -f $nfile && -z $mv_but_nodiff ]]; then
+
+ ${CDIFFCMD:-diff -bt -C 5} $ofile.lst $nfile.lst > $WDIR/$DIR/$F.cdiff
+ diff_to_html $F $DIR/$F "C" "$COMM" < $WDIR/$DIR/$F.cdiff \
+ > $WDIR/$DIR/$F.cdiff.html
+ print " cdiffs\c"
+
+ ${UDIFFCMD:-diff -bt -U 5} $ofile.lst $nfile.lst > $WDIR/$DIR/$F.udiff
+ diff_to_html $F $DIR/$F "U" "$COMM" < $WDIR/$DIR/$F.udiff \
+ > $WDIR/$DIR/$F.udiff.html
+
+ print " udiffs\c"
+
+ if [[ -x $WDIFF ]]; then
+ $WDIFF -c "$COMM" \
+ -t "$WNAME Wdiff $DIR/$F" $ofile.lst $nfile.lst > \
+ $WDIR/$DIR/$F.wdiff.html 2>/dev/null
+ if [[ $? -eq 0 ]]; then
+ print " wdiffs\c"
+ else
+ print " wdiffs[fail]\c"
+ fi
+ fi
+
+ sdiff_to_html $ofile $nfile $F $DIR "$COMM" \
+ > $WDIR/$DIR/$F.sdiff.html
+ print " sdiffs\c"
+
+ print " frames\c"
+
+ rm -f $WDIR/$DIR/$F.cdiff $WDIR/$DIR/$F.udiff
+
+ difflines $ofile.lst $nfile.lst > $WDIR/$DIR/$F.count
+
+ elif [[ -f $ofile && -f $nfile && -n $mv_but_nodiff ]]; then
+ # renamed file: may also have differences
+ difflines $ofile.lst $nfile.lst > $WDIR/$DIR/$F.count
+ elif [[ -f $nfile ]]; then
+ # new file: count added lines
+ difflines /dev/null $nfile.lst > $WDIR/$DIR/$F.count
+ elif [[ -f $ofile ]]; then
+ # old file: count deleted lines
+ difflines $ofile.lst /dev/null > $WDIR/$DIR/$F.count
+ fi
+ fi
+ else
+
+ #
+ # If we have old and new versions of the file then run the
+ # appropriate diffs. This is complicated by a couple of factors:
+ #
+ # - renames must be handled specially: we emit a 'remove'
+ # diff and an 'add' diff
+ # - new files and deleted files must be handled specially
+ # - Solaris patch(1m) can't cope with file creation
+ # (and hence renames) as of this writing.
+ # - To make matters worse, gnu patch doesn't interpret the
+ # output of Solaris diff properly when it comes to
+ # adds and deletes. We need to do some "cleansing"
+ # transformations:
+ # [to add a file] @@ -1,0 +X,Y @@ --> @@ -0,0 +X,Y @@
+ # [to del a file] @@ -X,Y +1,0 @@ --> @@ -X,Y +0,0 @@
+ #
+ cleanse_rmfile="sed 's/^\(@@ [0-9+,-]*\) [0-9+,-]* @@$/\1 +0,0 @@/'"
+ cleanse_newfile="sed 's/^@@ [0-9+,-]* \([0-9+,-]* @@\)$/@@ -0,0 \1/'"
+
+ rm -f $WDIR/$DIR/$F.patch
+ if [[ -z $rename ]]; then
+ if [ ! -f $ofile ]; then
+ diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
+ > $WDIR/$DIR/$F.patch
+ elif [ ! -f $nfile ]; then
+ diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
+ > $WDIR/$DIR/$F.patch
+ else
+ diff -u $ofile $nfile > $WDIR/$DIR/$F.patch
+ fi
+ else
+ diff -u $ofile /dev/null | sh -c "$cleanse_rmfile" \
+ > $WDIR/$DIR/$F.patch
+
+ diff -u /dev/null $nfile | sh -c "$cleanse_newfile" \
+ >> $WDIR/$DIR/$F.patch
+
+ fi
+
+
+ #
+ # Tack the patch we just made onto the accumulated patch for the
+ # whole wad.
+ #
+ cat $WDIR/$DIR/$F.patch >> $WDIR/$WNAME.patch
+
+ print " patch\c"
+
+ if [[ -f $ofile && -f $nfile && -z $mv_but_nodiff ]]; then
+
+ ${CDIFFCMD:-diff -bt -C 5} $ofile $nfile > $WDIR/$DIR/$F.cdiff
+ diff_to_html $F $DIR/$F "C" "$COMM" < $WDIR/$DIR/$F.cdiff \
+ > $WDIR/$DIR/$F.cdiff.html
+ print " cdiffs\c"
+
+ ${UDIFFCMD:-diff -bt -U 5} $ofile $nfile > $WDIR/$DIR/$F.udiff
+ diff_to_html $F $DIR/$F "U" "$COMM" < $WDIR/$DIR/$F.udiff \
+ > $WDIR/$DIR/$F.udiff.html
+
+ print " udiffs\c"
+
+ if [[ -x $WDIFF ]]; then
+ $WDIFF -c "$COMM" \
+ -t "$WNAME Wdiff $DIR/$F" $ofile $nfile > \
+ $WDIR/$DIR/$F.wdiff.html 2>/dev/null
+ if [[ $? -eq 0 ]]; then
+ print " wdiffs\c"
+ else
+ print " wdiffs[fail]\c"
+ fi
+ fi
+
+ sdiff_to_html $ofile $nfile $F $DIR "$COMM" \
+ > $WDIR/$DIR/$F.sdiff.html
+ print " sdiffs\c"
+
+ print " frames\c"
+
+ rm -f $WDIR/$DIR/$F.cdiff $WDIR/$DIR/$F.udiff
+
+ difflines $ofile $nfile > $WDIR/$DIR/$F.count
+
+ elif [[ -f $ofile && -f $nfile && -n $mv_but_nodiff ]]; then
+ # renamed file: may also have differences
+ difflines $ofile $nfile > $WDIR/$DIR/$F.count
+ elif [[ -f $nfile ]]; then
+ # new file: count added lines
+ difflines /dev/null $nfile > $WDIR/$DIR/$F.count
+ elif [[ -f $ofile ]]; then
+ # old file: count deleted lines
+ difflines $ofile /dev/null > $WDIR/$DIR/$F.count
+ fi
+ fi
+ #
+ # Now we generate the postscript for this file. We generate diffs
+ # only in the event that there is delta, or the file is new (it seems
+ # tree-killing to print out the contents of deleted files).
+ #
+ if [[ -f $nfile ]]; then
+ ocr=$ofile
+ [[ ! -f $ofile ]] && ocr=/dev/null
+
+ if [[ -z $mv_but_nodiff ]]; then
+ textcomm=`getcomments text $P $PP`
+ if [[ -x $CODEREVIEW ]]; then
+ $CODEREVIEW -y "$textcomm" \
+ -e $ocr $nfile \
+ > /tmp/$$.psfile 2>/dev/null &&
+ cat /tmp/$$.psfile >> $WDIR/$WNAME.ps
+ if [[ $? -eq 0 ]]; then
+ print " ps\c"
+ else
+ print " ps[fail]\c"
+ fi
+ fi
+ fi
+ fi
+
+ if [[ -f $ofile && -z $mv_but_nodiff ]]; then
+ if [[ -n $its_a_jar ]]; then
+ source_to_html Old $P < $ofile.lst > $WDIR/$DIR/$F-.html
+ else
+ source_to_html Old $P < $ofile > $WDIR/$DIR/$F-.html
+ fi
+ print " old\c"
+ fi
+
+ if [[ -f $nfile ]]; then
+ if [[ -n $its_a_jar ]]; then
+ source_to_html New $P < $nfile.lst > $WDIR/$DIR/$F.html
+ else
+ source_to_html New $P < $nfile > $WDIR/$DIR/$F.html
+ fi
+ print " new\c"
+ fi
+
+ print
+done < $FLIST
+
+frame_nav_js > $WDIR/ancnav.js
+frame_navigation > $WDIR/ancnav.html
+
+if [[ -f $WDIR/$WNAME.ps && -x $CODEREVIEW && -x $PS2PDF ]]; then
+ print " Generating PDF: \c"
+ fix_postscript $WDIR/$WNAME.ps | $PS2PDF - > $WDIR/$WNAME.pdf
+ print "Done."
+fi
+
+# Now build the index.html file that contains
+# links to the source files and their diffs.
+
+cd $CWS
+
+# Save total changed lines for Code Inspection.
+print "$TOTL" > $WDIR/TotalChangedLines
+
+print " index.html: \c"
+INDEXFILE=$WDIR/index.html
+exec 3<&1 # duplicate stdout to FD3.
+exec 1<&- # Close stdout.
+exec > $INDEXFILE # Open stdout to index file.
+
+print "$HTML<head>"
+print "<meta name=\"scm\" content=\"$SCM_MODE\" />"
+print "$STDHEAD"
+print "<title>$WNAME</title>"
+print "</head>"
+print "<body id=\"SUNWwebrev\">"
+print "<div class=\"summary\">"
+print "<h2>Code Review for $WNAME</h2>"
+
+print "<table>"
+
+if [[ -z $uflag ]]
+then
+ if [[ $SCM_MODE == "mercurial" ]]
+ then
+ #
+ # Let's try to extract the user name from the .hgrc file
+ #
+ username=`grep '^username' $HOME/.hgrc | sed 's/^username[ ]*=[ ]*\(.*\)/\1/'`
+ fi
+
+ if [[ -z $username ]]
+ then
+ #
+ # Figure out the username and gcos name. To maintain compatibility
+ # with passwd(4), we must support '&' substitutions.
+ #
+ username=`id | cut -d '(' -f 2 | cut -d ')' -f 1`
+ if [[ -x $GETENT ]]; then
+ realname=`$GETENT passwd $username | cut -d':' -f 5 | cut -d ',' -f 1`
+ fi
+ userupper=`print "$username" | sed 's/\<./\u&/g'`
+ realname=`print $realname | sed s/\&/$userupper/`
+ fi
+fi
+
+date="on `date`"
+
+if [[ -n "$username" && -n "$realname" ]]; then
+ print "<tr><th>Prepared by:</th>"
+ print "<td>$realname ($username) $date</td></tr>"
+elif [[ -n "$username" ]]; then
+ print "<tr><th>Prepared by:</th><td>$username $date</td></tr>"
+fi
+
+print "<tr><th>Workspace:</th><td>$CWS</td></tr>"
+if [[ -n $parent_webrev ]]; then
+ print "<tr><th>Compare against:</th><td>"
+ print "webrev at $parent_webrev"
+else
+ if [[ -n $OUTPWS2 ]]; then
+ print "<tr><th>Compare against:</th><td>"
+ print "$OUTPWS2"
+ fi
+fi
+print "</td></tr>"
+if [[ -n $rflag ]]; then
+ print "<tr><th>Compare against version:</th><td>$PARENT_REV</td></tr>"
+elif [[ -n $OUTREV ]]; then
+ if [[ -z $forestflag ]]; then
+ print "<tr><th>Compare against version:</th><td>$OUTREV</td></tr>"
+ fi
+fi
+if [[ -n $HG_BRANCH ]]; then
+ print "<tr><th>Branch:</th><td>$HG_BRANCH</td></tr>"
+fi
+
+print "<tr><th>Summary of changes:</th><td>"
+printCI $TOTL $TINS $TDEL $TMOD $TUNC
+print "</td></tr>"
+
+if [[ -f $WDIR/$WNAME.patch ]]; then
+ print "<tr><th>Patch of changes:</th><td>"
+ print "<a href=\"$WNAME.patch\">$WNAME.patch</a></td></tr>"
+fi
+if [[ -f $WDIR/$WNAME.pdf ]]; then
+ print "<tr><th>Printable review:</th><td>"
+ print "<a href=\"$WNAME.pdf\">$WNAME.pdf</a></td></tr>"
+fi
+
+if [[ -n "$iflag" ]]; then
+ print "<tr><th>Author comments:</th><td><div>"
+ cat /tmp/$$.include
+ print "</div></td></tr>"
+fi
+# Add links to referenced CRs, if any
+# external URL has a <title> like:
+# <title>Bug ID: 6641309 Wrong Cookie separator used in HttpURLConnection</title>
+# while internal URL has <title> like:
+# <title>6641309: Wrong Cookie separator used in HttpURLConnection</title>
+#
+if [[ -n $CRID ]]; then
+ for id in $CRID
+ do
+ print "<tr><th>Bug id:</th><td>"
+ url="${BUGURL}${id}"
+ if [[ -n $WGET ]]; then
+ msg=`$WGET -q $url -O - | grep '<title>' | sed 's/<title>\(.*\)<\/title>/\1/' | sed 's/Bug ID://'`
+ fi
+ if [[ -n $msg ]]; then
+ print "<a href=\"$url\">$msg</a>"
+ else
+ print $id | bug2url
+ fi
+
+ print "</td></tr>"
+ done
+fi
+print "<tr><th>Legend:</th><td>"
+print "<b>Modified file</b><br><font color=red><b>Deleted file</b></font><br><font color=green><b>New file</b></font></td></tr>"
+print "</table>"
+print "</div>"
+
+#
+# Second pass through the files: generate the rest of the index file
+#
+while read LINE
+do
+ set - $LINE
+ if [[ $1 == "Revision:" ]]; then
+ FIRST_CREV=`expr $3 + 1`
+ continue
+ fi
+ P=$1
+
+ if [[ $# == 2 ]]; then
+ PP=$2
+ oldname=" <i>(was $PP)</i>"
+
+ else
+ PP=$P
+ oldname=""
+ fi
+
+ DIR=${P%/*}
+ if [[ $DIR == $P ]]; then
+ DIR="." # File at root of workspace
+ fi
+
+ # Avoid processing the same file twice.
+ # It's possible for renamed files to
+ # appear twice in the file list
+
+ F=$WDIR/$P
+
+ print "<p><code>"
+
+ # If there's a diffs file, make diffs links
+
+ NODIFFS=
+ if [[ -f $F.cdiff.html ]]; then
+ print "<a href=\"$P.cdiff.html\">Cdiffs</a>"
+ print "<a href=\"$P.udiff.html\">Udiffs</a>"
+
+ if [[ -f $F.wdiff.html && -x $WDIFF ]]; then
+ print "<a href=\"$P.wdiff.html\">Wdiffs</a>"
+ fi
+
+ print "<a href=\"$P.sdiff.html\">Sdiffs</a>"
+
+ print "<a href=\"$P.frames.html\">Frames</a>"
+ else
+ NODIFFS=1
+ print " ------ ------ ------"
+
+ if [[ -x $WDIFF ]]; then
+ print " ------"
+ fi
+
+ print " ------"
+ fi
+
+ # If there's an old file, make the link
+
+ NOOLD=
+ if [[ -f $F-.html ]]; then
+ print "<a href=\"$P-.html\">Old</a>"
+ else
+ NOOLD=1
+ print " ---"
+ fi
+
+ # If there's an new file, make the link
+
+ NONEW=
+ if [[ -f $F.html ]]; then
+ print "<a href=\"$P.html\">New</a>"
+ else
+ NONEW=1
+ print " ---"
+ fi
+
+ if [[ -f $F.patch ]]; then
+ print "<a href=\"$P.patch\">Patch</a>"
+ else
+ print " -----"
+ fi
+
+ if [[ -f $WDIR/raw_files/new/$P ]]; then
+ print "<a href=\"raw_files/new/$P\">Raw</a>"
+ else
+ print " ---"
+ fi
+ print "</code>"
+ if [[ -n $NODIFFS && -z $oldname ]]; then
+ if [[ -n $NOOLD ]]; then
+ print "<font color=green><b>$P</b></font>"
+ elif [[ -n $NONEW ]]; then
+ print "<font color=red><b>$P</b></font>"
+ fi
+ else
+ print "<b>$P</b> $oldname"
+ fi
+
+ #
+ # Check for usr/closed
+ #
+ if [ ! -z "$Oflag" ]; then
+ if [[ $P == usr/closed/* ]]; then
+ print " <i>Closed source: omitted from" \
+ "this review</i>"
+ fi
+ fi
+
+ print "</p><blockquote>\c"
+ # Insert delta comments if any
+ comments=`getcomments html $P $PP`
+ if [ -n "$comments" ]; then
+ print "<pre>$comments</pre>"
+ fi
+
+ # Add additional comments comment
+
+ print "<!-- Add comments to explain changes in $P here -->"
+
+ # Add count of changes.
+
+ if [[ -f $F.count ]]; then
+ cat $F.count
+ rm $F.count
+ fi
+ print "</blockquote>"
+done < $FLIST
+
+print
+print
+print "<hr />"
+print "<p style=\"font-size: small\">"
+print "This code review page was prepared using <b>$0</b>"
+print "(vers $WEBREV_UPDATED)."
+print "</body>"
+print "</html>"
+
+if [[ -n $ZIP ]]; then
+ # Let's generate a zip file for convenience
+ cd $WDIR/..
+ if [ -f webrev.zip ]; then
+ rm webrev.zip
+ fi
+ $ZIP -r webrev webrev >/dev/null 2>&1
+fi
+
+exec 1<&- # Close FD 1.
+exec 1<&3 # dup FD 3 to restore stdout.
+exec 3<&- # close FD 3.
+
+print "Done."
+print "Output to: $WDIR"
+
--- a/make/sponsors-rules.gmk Tue Mar 08 16:05:16 2011 -0800
+++ b/make/sponsors-rules.gmk Wed Jul 05 17:36:49 2017 +0200
@@ -59,10 +59,10 @@
sponsors-build:
ifeq ($(ARCH_DATA_MODEL), 32)
ifeq ($(BUILD_SPONSORS), true)
- @$(call MakeStart, sponsors, $(SPONSORS_BUILD_TARGETS))
+ @$(call MakeStart,sponsors,$(SPONSORS_BUILD_TARGETS))
($(CD) $(SPONSORS_TOPDIR)/make && \
$(MAKE) $(SPONSORS_BUILD_TARGETS) $(SPONSORS_BUILD_ARGUMENTS))
- @$(call MakeFinish, sponsors, $(SPONSORS_BUILD_TARGETS))
+ @$(call MakeFinish,sponsors,$(SPONSORS_BUILD_TARGETS))
endif
endif