--- a/common/autoconf/generated-configure.sh Wed Jul 05 20:30:11 2017 +0200
+++ b/common/autoconf/generated-configure.sh Wed Apr 29 22:33:42 2015 +0200
@@ -3464,6 +3464,10 @@
# Setup basic configuration paths, and platform-specific stuff related to PATHs.
+# Evaluates platform specific overrides for devkit variables.
+# $1: Name of variable
+
+
@@ -4363,7 +4367,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1429271657
+DATE_WHEN_GENERATED=1430331133
###############################################################################
#
@@ -14182,7 +14186,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -14308,7 +14312,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -14878,7 +14882,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -14965,12 +14969,63 @@
DEVKIT_ROOT="$with_devkit"
# Check for a meta data info file in the root of the devkit
if test -f "$DEVKIT_ROOT/devkit.info"; then
+ . $DEVKIT_ROOT/devkit.info
# This potentially sets the following:
- # DEVKIT_NAME: A descriptive name of the devkit
- # DEVKIT_TOOLCHAIN_PATH: Corresponds to --with-toolchain-path
- # DEVKIT_EXTRA_PATH: Corresponds to --with-extra-path
- # DEVKIT_SYSROOT: Corresponds to --with-sysroot
- . $DEVKIT_ROOT/devkit.info
+ # A descriptive name of the devkit
+
+ if test "x$DEVKIT_NAME" = x; then
+ eval DEVKIT_NAME="\${DEVKIT_NAME_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-extra-path
+
+ if test "x$DEVKIT_EXTRA_PATH" = x; then
+ eval DEVKIT_EXTRA_PATH="\${DEVKIT_EXTRA_PATH_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-toolchain-path
+
+ if test "x$DEVKIT_TOOLCHAIN_PATH" = x; then
+ eval DEVKIT_TOOLCHAIN_PATH="\${DEVKIT_TOOLCHAIN_PATH_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-sysroot
+
+ if test "x$DEVKIT_SYSROOT" = x; then
+ eval DEVKIT_SYSROOT="\${DEVKIT_SYSROOT_${OPENJDK_TARGET_CPU}}"
+ fi
+
+
+ # Identifies the Visual Studio version in the devkit
+
+ if test "x$DEVKIT_VS_VERSION" = x; then
+ eval DEVKIT_VS_VERSION="\${DEVKIT_VS_VERSION_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # The Visual Studio include environment variable
+
+ if test "x$DEVKIT_VS_INCLUDE" = x; then
+ eval DEVKIT_VS_INCLUDE="\${DEVKIT_VS_INCLUDE_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # The Visual Studio lib environment variable
+
+ if test "x$DEVKIT_VS_LIB" = x; then
+ eval DEVKIT_VS_LIB="\${DEVKIT_VS_LIB_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-msvcr-dll
+
+ if test "x$DEVKIT_MSVCR_DLL" = x; then
+ eval DEVKIT_MSVCR_DLL="\${DEVKIT_MSVCR_DLL_${OPENJDK_TARGET_CPU}}"
+ fi
+
+ # Corresponds to --with-msvcp-dll
+
+ if test "x$DEVKIT_MSVCP_DLL" = x; then
+ eval DEVKIT_MSVCP_DLL="\${DEVKIT_MSVCP_DLL_${OPENJDK_TARGET_CPU}}"
+ fi
+
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for devkit" >&5
@@ -14983,7 +15038,6 @@
$as_echo "$DEVKIT_ROOT" >&6; }
fi
- if test "x$DEVKIT_EXTRA_PATH" != x; then
if test "x$DEVKIT_EXTRA_PATH" != x; then
if test "x$EXTRA_PATH" = x; then
@@ -14993,7 +15047,6 @@
fi
fi
- fi
# Fallback default of just /bin if DEVKIT_PATH is not defined
if test "x$DEVKIT_TOOLCHAIN_PATH" = x; then
@@ -15288,8 +15341,12 @@
files_present=`$LS $OUTPUT_ROOT`
# Configure has already touched config.log and confdefs.h in the current dir when this check
# is performed.
- filtered_files=`$ECHO "$files_present" | $SED -e 's/config.log//g' -e 's/confdefs.h//g' -e 's/ //g' \
- | $TR -d '\n'`
+ filtered_files=`$ECHO "$files_present" \
+ | $SED -e 's/config.log//g' \
+ -e 's/confdefs.h//g' \
+ -e 's/fixpath.exe//g' \
+ -e 's/ //g' \
+ | $TR -d '\n'`
if test "x$filtered_files" != x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: Current directory is $CURDIR." >&5
$as_echo "$as_me: Current directory is $CURDIR." >&6;}
@@ -15356,7 +15413,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -15671,7 +15728,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -16058,7 +16115,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -16442,7 +16499,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -16831,7 +16888,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -17214,7 +17271,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -20279,7 +20336,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -20608,7 +20665,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -20799,7 +20856,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -20983,7 +21040,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -21166,7 +21223,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -21349,7 +21406,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -21523,7 +21580,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -21672,7 +21729,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -21842,7 +21899,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -22167,7 +22224,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -22379,7 +22436,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -22556,7 +22613,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -22761,7 +22818,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -22938,7 +22995,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -23143,7 +23200,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -23320,7 +23377,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -23525,7 +23582,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -23702,7 +23759,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -23894,7 +23951,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24069,7 +24126,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24262,7 +24319,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24437,7 +24494,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24629,7 +24686,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24804,7 +24861,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -24997,7 +25054,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -25172,7 +25229,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -25346,7 +25403,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -26726,11 +26783,15 @@
ORG_CFLAGS="$CFLAGS"
ORG_CXXFLAGS="$CXXFLAGS"
+ # autoconf magic only relies on PATH, so update it if tools dir is specified
+ OLD_PATH="$PATH"
+
# On Windows, we need to detect the visual studio installation first.
# This will change the PATH, but we need to keep that new PATH even
# after toolchain detection is done, since the compiler (on x86) uses
# it for DLL resolution in runtime.
- if test "x$OPENJDK_BUILD_OS" = "xwindows" && test "x$TOOLCHAIN_TYPE" = "xmicrosoft"; then
+ if test "x$OPENJDK_BUILD_OS" = "xwindows" \
+ && test "x$TOOLCHAIN_TYPE" = "xmicrosoft"; then
# Store path to cygwin link.exe to help excluding it when searching for
# VS linker. This must be done before changing the PATH when looking for VS.
@@ -26808,6 +26869,56 @@
done
exit 0
+ elif test "x$DEVKIT_VS_VERSION" != x; then
+ VS_VERSION=$DEVKIT_VS_VERSION
+ TOOLCHAIN_VERSION=$VS_VERSION
+ eval VS_DESCRIPTION="\${VS_DESCRIPTION_${VS_VERSION}}"
+ eval VS_VERSION_INTERNAL="\${VS_VERSION_INTERNAL_${VS_VERSION}}"
+ eval MSVCR_NAME="\${VS_MSVCR_${VS_VERSION}}"
+ eval MSVCP_NAME="\${VS_MSVCP_${VS_VERSION}}"
+ eval PLATFORM_TOOLSET="\${VS_VS_PLATFORM_NAME_${VS_VERSION}}"
+ VS_PATH="$TOOLCHAIN_PATH:$PATH"
+
+ # Convert DEVKIT_VS_INCLUDE into windows style VS_INCLUDE so that it
+ # can still be exported as INCLUDE for compiler invocations without
+ # SYSROOT_CFLAGS
+ OLDIFS="$IFS"
+ IFS=";"
+ for i in $DEVKIT_VS_INCLUDE; do
+ ipath=$i
+
+ unix_path="$ipath"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ windows_path=`$CYGPATH -m "$unix_path"`
+ ipath="$windows_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ windows_path=`cmd //c echo $unix_path`
+ ipath="$windows_path"
+ fi
+
+ VS_INCLUDE="$VS_INCLUDE;$ipath"
+ done
+ # Convert DEVKIT_VS_LIB into VS_LIB so that it can still be exported
+ # as LIB for compiler invocations without SYSROOT_LDFLAGS
+ for i in $DEVKIT_VS_LIB; do
+ libpath=$i
+
+ unix_path="$libpath"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ windows_path=`$CYGPATH -m "$unix_path"`
+ libpath="$windows_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ windows_path=`cmd //c echo $unix_path`
+ libpath="$windows_path"
+ fi
+
+ VS_LIB="$VS_LIB;$libpath"
+ done
+ IFS="$OLDIFS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found devkit $VS_DESCRIPTION" >&5
+$as_echo "$as_me: Found devkit $VS_DESCRIPTION" >&6;}
+
elif test "x$with_toolchain_version" != x; then
# User override; check that it is valid
if test "x${VALID_VS_VERSIONS/$with_toolchain_version/}" = "x${VALID_VS_VERSIONS}"; then
@@ -27380,8 +27491,10 @@
done
- if test "x$VS_ENV_CMD" != x; then
- # We have found a Visual Studio environment on disk, let's extract variables from the vsvars bat file.
+ # If we have a devkit, skip all of the below.
+ if test "x$DEVKIT_VS_VERSION" = x; then
+ if test "x$VS_ENV_CMD" != x; then
+ # We have found a Visual Studio environment on disk, let's extract variables from the vsvars bat file.
# Only process if variable expands to non-empty
@@ -27481,7 +27594,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -27669,17 +27782,17 @@
fi
- # Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
- { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to extract Visual Studio environment variables" >&5
+ # Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to extract Visual Studio environment variables" >&5
$as_echo "$as_me: Trying to extract Visual Studio environment variables" >&6;}
- # We need to create a couple of temporary files.
- VS_ENV_TMP_DIR="$CONFIGURESUPPORT_OUTPUTDIR/vs-env"
- $MKDIR -p $VS_ENV_TMP_DIR
-
- # Cannot use the VS10 setup script directly (since it only updates the DOS subshell environment).
- # Instead create a shell script which will set the relevant variables when run.
- WINPATH_VS_ENV_CMD="$VS_ENV_CMD"
+ # We need to create a couple of temporary files.
+ VS_ENV_TMP_DIR="$CONFIGURESUPPORT_OUTPUTDIR/vs-env"
+ $MKDIR -p $VS_ENV_TMP_DIR
+
+ # Cannot use the VS10 setup script directly (since it only updates the DOS subshell environment).
+ # Instead create a shell script which will set the relevant variables when run.
+ WINPATH_VS_ENV_CMD="$VS_ENV_CMD"
unix_path="$WINPATH_VS_ENV_CMD"
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -27690,7 +27803,7 @@
WINPATH_VS_ENV_CMD="$windows_path"
fi
- WINPATH_BASH="$BASH"
+ WINPATH_BASH="$BASH"
unix_path="$WINPATH_BASH"
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -27702,59 +27815,67 @@
fi
- # Generate a DOS batch file which runs $VS_ENV_CMD, and then creates a shell
- # script (executable by bash) that will setup the important variables.
- EXTRACT_VC_ENV_BAT_FILE="$VS_ENV_TMP_DIR/extract-vs-env.bat"
- $ECHO "@echo off" > $EXTRACT_VC_ENV_BAT_FILE
- # This will end up something like:
- # call C:/progra~2/micros~2.0/vc/bin/amd64/vcvars64.bat
- $ECHO "call $WINPATH_VS_ENV_CMD $VS_ENV_ARGS" >> $EXTRACT_VC_ENV_BAT_FILE
- # These will end up something like:
- # C:/CygWin/bin/bash -c 'echo VS_PATH=\"$PATH\" > localdevenv.sh
- # The trailing space for everyone except PATH is no typo, but is needed due
- # to trailing \ in the Windows paths. These will be stripped later.
- $ECHO "$WINPATH_BASH -c 'echo VS_PATH="'\"$PATH\" > set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VS_INCLUDE="'\"$INCLUDE\;$include \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VS_LIB="'\"$LIB\;$lib \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo VCINSTALLDIR="'\"$VCINSTALLDIR \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo WindowsSdkDir="'\"$WindowsSdkDir \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
- $ECHO "$WINPATH_BASH -c 'echo WINDOWSSDKDIR="'\"$WINDOWSSDKDIR \" >> set-vs-env.sh' >> $EXTRACT_VC_ENV_BAT_FILE
-
- # Now execute the newly created bat file.
- # The | cat is to stop SetEnv.Cmd to mess with system colors on msys.
- # Change directory so we don't need to mess with Windows paths in redirects.
- cd $VS_ENV_TMP_DIR
- cmd /c extract-vs-env.bat | $CAT
- cd $CURDIR
-
- if test ! -s $VS_ENV_TMP_DIR/set-vs-env.sh; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not succesfully extract the envionment variables needed for the VS setup." >&5
+ # Generate a DOS batch file which runs $VS_ENV_CMD, and then creates a shell
+ # script (executable by bash) that will setup the important variables.
+ EXTRACT_VC_ENV_BAT_FILE="$VS_ENV_TMP_DIR/extract-vs-env.bat"
+ $ECHO "@echo off" > $EXTRACT_VC_ENV_BAT_FILE
+ # This will end up something like:
+ # call C:/progra~2/micros~2.0/vc/bin/amd64/vcvars64.bat
+ $ECHO "call $WINPATH_VS_ENV_CMD $VS_ENV_ARGS" >> $EXTRACT_VC_ENV_BAT_FILE
+ # These will end up something like:
+ # C:/CygWin/bin/bash -c 'echo VS_PATH=\"$PATH\" > localdevenv.sh
+ # The trailing space for everyone except PATH is no typo, but is needed due
+ # to trailing \ in the Windows paths. These will be stripped later.
+ $ECHO "$WINPATH_BASH -c 'echo VS_PATH="'\"$PATH\" > set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+ $ECHO "$WINPATH_BASH -c 'echo VS_INCLUDE="'\"$INCLUDE\;$include \" >> set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+ $ECHO "$WINPATH_BASH -c 'echo VS_LIB="'\"$LIB\;$lib \" >> set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+ $ECHO "$WINPATH_BASH -c 'echo VCINSTALLDIR="'\"$VCINSTALLDIR \" >> set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+ $ECHO "$WINPATH_BASH -c 'echo WindowsSdkDir="'\"$WindowsSdkDir \" >> set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+ $ECHO "$WINPATH_BASH -c 'echo WINDOWSSDKDIR="'\"$WINDOWSSDKDIR \" >> set-vs-env.sh' \
+ >> $EXTRACT_VC_ENV_BAT_FILE
+
+ # Now execute the newly created bat file.
+ # The | cat is to stop SetEnv.Cmd to mess with system colors on msys.
+ # Change directory so we don't need to mess with Windows paths in redirects.
+ cd $VS_ENV_TMP_DIR
+ cmd /c extract-vs-env.bat | $CAT
+ cd $CURDIR
+
+ if test ! -s $VS_ENV_TMP_DIR/set-vs-env.sh; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not succesfully extract the envionment variables needed for the VS setup." >&5
$as_echo "$as_me: Could not succesfully extract the envionment variables needed for the VS setup." >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&5
$as_echo "$as_me: Try setting --with-tools-dir to the VC/bin directory within the VS installation" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&5
$as_echo "$as_me: or run \"bash.exe -l\" from a VS command prompt and then run configure from there." >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
- # Now set all paths and other env variables. This will allow the rest of
- # the configure script to find and run the compiler in the proper way.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Setting extracted environment variables" >&5
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ # Now set all paths and other env variables. This will allow the rest of
+ # the configure script to find and run the compiler in the proper way.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Setting extracted environment variables" >&5
$as_echo "$as_me: Setting extracted environment variables" >&6;}
- . $VS_ENV_TMP_DIR/set-vs-env.sh
- # Now we have VS_PATH, VS_INCLUDE, VS_LIB. For further checking, we
- # also define VCINSTALLDIR, WindowsSdkDir and WINDOWSSDKDIR.
- else
- # We did not find a vsvars bat file, let's hope we are run from a VS command prompt.
- { $as_echo "$as_me:${as_lineno-$LINENO}: Cannot locate a valid Visual Studio installation, checking current environment" >&5
+ . $VS_ENV_TMP_DIR/set-vs-env.sh
+ # Now we have VS_PATH, VS_INCLUDE, VS_LIB. For further checking, we
+ # also define VCINSTALLDIR, WindowsSdkDir and WINDOWSSDKDIR.
+ else
+ # We did not find a vsvars bat file, let's hope we are run from a VS command prompt.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Cannot locate a valid Visual Studio installation, checking current environment" >&5
$as_echo "$as_me: Cannot locate a valid Visual Studio installation, checking current environment" >&6;}
+ fi
fi
# At this point, we should have correct variables in the environment, or we can't continue.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Visual Studio variables" >&5
$as_echo_n "checking for Visual Studio variables... " >&6; }
- if test "x$VCINSTALLDIR" != x || test "x$WindowsSDKDir" != x || test "x$WINDOWSSDKDIR" != x; then
+ if test "x$VCINSTALLDIR" != x || test "x$WindowsSDKDir" != x \
+ || test "x$WINDOWSSDKDIR" != x || test "x$DEVKIT_NAME" != x; then
if test "x$VS_INCLUDE" = x || test "x$VS_LIB" = x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: present but broken" >&5
$as_echo "present but broken" >&6; }
@@ -27839,7 +27960,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -27989,7 +28110,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -28108,9 +28229,6 @@
export LIB="$VS_LIB"
fi
- # autoconf magic only relies on PATH, so update it if tools dir is specified
- OLD_PATH="$PATH"
-
# For solaris we really need solaris tools, and not the GNU equivalent.
# The build tools on Solaris reside in /usr/ccs (C Compilation System),
# so add that to path before starting to probe.
@@ -28449,7 +28567,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -28910,7 +29028,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -30197,7 +30315,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -30658,7 +30776,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -31524,7 +31642,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -31943,7 +32061,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -32291,7 +32409,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -32790,7 +32908,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -33422,7 +33540,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -33897,7 +34015,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -34240,7 +34358,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -34581,7 +34699,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -34904,7 +35022,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -35423,7 +35541,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -35895,7 +36013,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -36367,7 +36485,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -36840,7 +36958,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -37424,7 +37542,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -38006,7 +38124,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -38597,7 +38715,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -39185,7 +39303,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -39681,7 +39799,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -40153,7 +40271,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -40625,7 +40743,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -41176,7 +41294,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -44730,7 +44848,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -44856,7 +44974,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -45091,7 +45209,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -45217,7 +45335,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -45713,7 +45831,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -45839,7 +45957,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46049,7 +46167,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46175,7 +46293,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46376,7 +46494,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46502,7 +46620,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46703,7 +46821,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -46829,7 +46947,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47031,7 +47149,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47157,7 +47275,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47360,7 +47478,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47486,7 +47604,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47685,7 +47803,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -47811,7 +47929,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -48010,7 +48128,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -48136,7 +48254,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -48318,7 +48436,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -48452,7 +48570,7 @@
# Going to short mode and back again did indeed matter. Since short mode is
# case insensitive, let's make it lowercase to improve readability.
shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
+ # Now convert it back to Unix-style (cygpath)
input_path=`$CYGPATH -u "$shortmode_path"`
new_path="$input_path"
fi
@@ -49967,7 +50085,7 @@
if test "x$with_msvcr_dll" != x; then
# If given explicitely by user, do not probe. If not present, fail directly.
- DLL_NAME="$DLL_NAME"
+ DLL_NAME="$MSVCR_NAME"
POSSIBLE_MSVC_DLL="$with_msvcr_dll"
METHOD="--with-msvcr-dll"
if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
@@ -49997,6 +50115,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50012,9 +50256,183 @@
if test "x$MSVC_DLL" = x; then
as_fn_error $? "Could not find a proper $MSVCR_NAME as specified by --with-msvcr-dll" "$LINENO" 5
fi
- else
-
- VAR_NAME="MSVCR_DLL"
+ MSVCR_DLL="$MSVC_DLL"
+ elif test "x$DEVKIT_MSVCR_DLL" != x; then
+
+ DLL_NAME="$MSVCR_NAME"
+ POSSIBLE_MSVC_DLL="$DEVKIT_MSVCR_DLL"
+ METHOD="devkit"
+ if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
+$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
+
+ # Need to check if the found msvcr is correct architecture
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
+$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
+ MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
+ # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ CORRECT_MSVCR_ARCH="PE32 executable"
+ else
+ CORRECT_MSVCR_ARCH="PE32+ executable"
+ fi
+ else
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ CORRECT_MSVCR_ARCH=386
+ else
+ CORRECT_MSVCR_ARCH=x86-64
+ fi
+ fi
+ if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+ MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
+$as_echo_n "checking for $DLL_NAME... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
+$as_echo "$MSVC_DLL" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
+$as_echo "incorrect, ignoring" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
+$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
+ fi
+ fi
+
+ if test "x$MSVC_DLL" = x; then
+ as_fn_error $? "Could not find a proper $MSVCR_NAME as specified by devkit" "$LINENO" 5
+ fi
+ MSVCR_DLL="$MSVC_DLL"
+ else
+
DLL_NAME="${MSVCR_NAME}"
MSVC_DLL=
@@ -50069,6 +50487,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50118,6 +50662,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50177,6 +50847,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50243,6 +51039,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50306,6 +51228,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50329,137 +51377,9 @@
as_fn_error $? "Could not find $DLL_NAME. Please specify using --with-msvcr-dll." "$LINENO" 5
fi
- MSVCR_DLL=$MSVC_DLL
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVCR_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVCR_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVCR_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVCR_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVCR_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVCR_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVCR_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVCR_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVCR_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVCR_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVCR_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVCR_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVCR_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVCR_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVCR_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVCR_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- MSVCR_DLL="`cd "$path"; $THEPWDCMD -L`"
- fi
- fi
-
- MSVCR_DLL=$MSVCR_DLL
-
-
- fi
+ MSVCR_DLL="$MSVC_DLL"
+ fi
+
# Check whether --with-msvcp-dll was given.
@@ -50472,7 +51392,7 @@
if test "x$with_msvcp_dll" != x; then
# If given explicitely by user, do not probe. If not present, fail directly.
- DLL_NAME="$DLL_NAME"
+ DLL_NAME="$MSVCP_NAME"
POSSIBLE_MSVC_DLL="$with_msvcp_dll"
METHOD="--with-msvcp-dll"
if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
@@ -50502,6 +51422,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50517,9 +51563,183 @@
if test "x$MSVC_DLL" = x; then
as_fn_error $? "Could not find a proper $MSVCP_NAME as specified by --with-msvcp-dll" "$LINENO" 5
fi
- else
-
- VAR_NAME="MSVCP_DLL"
+ MSVCP_DLL="$MSVC_DLL"
+ elif test "x$DEVKIT_MSVCP_DLL" != x; then
+
+ DLL_NAME="$MSVCP_NAME"
+ POSSIBLE_MSVC_DLL="$DEVKIT_MSVCP_DLL"
+ METHOD="devkit"
+ if test -n "$POSSIBLE_MSVC_DLL" -a -e "$POSSIBLE_MSVC_DLL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&5
+$as_echo "$as_me: Found $DLL_NAME at $POSSIBLE_MSVC_DLL using $METHOD" >&6;}
+
+ # Need to check if the found msvcr is correct architecture
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking found $DLL_NAME architecture" >&5
+$as_echo_n "checking found $DLL_NAME architecture... " >&6; }
+ MSVC_DLL_FILETYPE=`$FILE -b "$POSSIBLE_MSVC_DLL"`
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ # The MSYS 'file' command returns "PE32 executable for MS Windows (DLL) (GUI) Intel 80386 32-bit"
+ # on x32 and "PE32+ executable for MS Windows (DLL) (GUI) Mono/.Net assembly" on x64 systems.
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ CORRECT_MSVCR_ARCH="PE32 executable"
+ else
+ CORRECT_MSVCR_ARCH="PE32+ executable"
+ fi
+ else
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
+ CORRECT_MSVCR_ARCH=386
+ else
+ CORRECT_MSVCR_ARCH=x86-64
+ fi
+ fi
+ if $ECHO "$MSVC_DLL_FILETYPE" | $GREP "$CORRECT_MSVCR_ARCH" 2>&1 > /dev/null; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+ MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
+$as_echo_n "checking for $DLL_NAME... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
+$as_echo "$MSVC_DLL" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: incorrect, ignoring" >&5
+$as_echo "incorrect, ignoring" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&5
+$as_echo "$as_me: The file type of the located $DLL_NAME is $MSVC_DLL_FILETYPE" >&6;}
+ fi
+ fi
+
+ if test "x$MSVC_DLL" = x; then
+ as_fn_error $? "Could not find a proper $MSVCP_NAME as specified by devkit" "$LINENO" 5
+ fi
+ MSVCP_DLL="$MSVC_DLL"
+ else
+
DLL_NAME="${MSVCP_NAME}"
MSVC_DLL=
@@ -50574,6 +51794,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50623,6 +51969,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50682,6 +52154,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50748,6 +52346,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50811,6 +52535,132 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
MSVC_DLL="$POSSIBLE_MSVC_DLL"
+
+ # Only process if variable expands to non-empty
+
+ if test "x$MSVC_DLL" != x; then
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+
+ # Input might be given as Windows format, start by converting to
+ # unix format.
+ path="$MSVC_DLL"
+ new_path=`$CYGPATH -u "$path"`
+
+ # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
+ # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
+ # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
+ # "foo.exe" is OK but "foo" is an error.
+ #
+ # This test is therefore slightly more accurate than "test -f" to check for file precense.
+ # It is also a way to make sure we got the proper file name for the real test later on.
+ test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
+ if test "x$test_shortpath" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Cannot locate the the path of MSVC_DLL" "$LINENO" 5
+ fi
+
+ # Call helper function which possibly converts this using DOS-style short mode.
+ # If so, the updated path is stored in $new_path.
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ shortmode_path=`$CYGPATH -s -m -a "$input_path"`
+ path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
+ if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
+ # Going to short mode and back again did indeed matter. Since short mode is
+ # case insensitive, let's make it lowercase to improve readability.
+ shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ # Now convert it back to Unix-style (cygpath)
+ input_path=`$CYGPATH -u "$shortmode_path"`
+ new_path="$input_path"
+ fi
+ fi
+
+ test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
+ if test "x$test_cygdrive_prefix" = x; then
+ # As a simple fix, exclude /usr/bin since it's not a real path.
+ if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
+ # The path is in a Cygwin special directory (e.g. /home). We need this converted to
+ # a path prefixed by /cygdrive for fixpath to work.
+ new_path="$CYGWIN_ROOT_PATH$input_path"
+ fi
+ fi
+
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+
+ path="$MSVC_DLL"
+ has_colon=`$ECHO $path | $GREP ^.:`
+ new_path="$path"
+ if test "x$has_colon" = x; then
+ # Not in mixed or Windows style, start by that.
+ new_path=`cmd //c echo $path`
+ fi
+
+
+ input_path="$new_path"
+ # Check if we need to convert this using DOS-style short mode. If the path
+ # contains just simple characters, use it. Otherwise (spaces, weird characters),
+ # take no chances and rewrite it.
+ # Note: m4 eats our [], so we need to use [ and ] instead.
+ has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
+ if test "x$has_forbidden_chars" != x; then
+ # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
+ new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+
+
+ windows_path="$new_path"
+ if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
+ unix_path=`$CYGPATH -u "$windows_path"`
+ new_path="$unix_path"
+ elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
+ unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
+ new_path="$unix_path"
+ fi
+
+ if test "x$path" != "x$new_path"; then
+ MSVC_DLL="$new_path"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVC_DLL to \"$new_path\"" >&5
+$as_echo "$as_me: Rewriting MSVC_DLL to \"$new_path\"" >&6;}
+ fi
+
+ # Save the first 10 bytes of this path to the storage, so fixpath can work.
+ all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
+
+ else
+ # We're on a unix platform. Hooray! :)
+ path="$MSVC_DLL"
+ has_space=`$ECHO "$path" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&5
+$as_echo "$as_me: The path of MSVC_DLL, which resolves as \"$path\", is invalid." >&6;}
+ as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
+ fi
+
+ # Use eval to expand a potential ~
+ eval path="$path"
+ if test ! -f "$path" && test ! -d "$path"; then
+ as_fn_error $? "The path of MSVC_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
+ fi
+
+ MSVC_DLL="`cd "$path"; $THEPWDCMD -L`"
+ fi
+ fi
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $DLL_NAME" >&5
$as_echo_n "checking for $DLL_NAME... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSVC_DLL" >&5
@@ -50834,137 +52684,9 @@
as_fn_error $? "Could not find $DLL_NAME. Please specify using --with-msvcr-dll." "$LINENO" 5
fi
- MSVCP_DLL=$MSVC_DLL
-
- # Only process if variable expands to non-empty
-
- if test "x$MSVCP_DLL" != x; then
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
-
- # Input might be given as Windows format, start by converting to
- # unix format.
- path="$MSVCP_DLL"
- new_path=`$CYGPATH -u "$path"`
-
- # Cygwin tries to hide some aspects of the Windows file system, such that binaries are
- # named .exe but called without that suffix. Therefore, "foo" and "foo.exe" are considered
- # the same file, most of the time (as in "test -f"). But not when running cygpath -s, then
- # "foo.exe" is OK but "foo" is an error.
- #
- # This test is therefore slightly more accurate than "test -f" to check for file precense.
- # It is also a way to make sure we got the proper file name for the real test later on.
- test_shortpath=`$CYGPATH -s -m "$new_path" 2> /dev/null`
- if test "x$test_shortpath" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVCP_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVCP_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Cannot locate the the path of MSVCP_DLL" "$LINENO" 5
- fi
-
- # Call helper function which possibly converts this using DOS-style short mode.
- # If so, the updated path is stored in $new_path.
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-._/a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- shortmode_path=`$CYGPATH -s -m -a "$input_path"`
- path_after_shortmode=`$CYGPATH -u "$shortmode_path"`
- if test "x$path_after_shortmode" != "x$input_to_shortpath"; then
- # Going to short mode and back again did indeed matter. Since short mode is
- # case insensitive, let's make it lowercase to improve readability.
- shortmode_path=`$ECHO "$shortmode_path" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- # Now convert it back to Unix-stile (cygpath)
- input_path=`$CYGPATH -u "$shortmode_path"`
- new_path="$input_path"
- fi
- fi
-
- test_cygdrive_prefix=`$ECHO $input_path | $GREP ^/cygdrive/`
- if test "x$test_cygdrive_prefix" = x; then
- # As a simple fix, exclude /usr/bin since it's not a real path.
- if test "x`$ECHO $new_path | $GREP ^/usr/bin/`" = x; then
- # The path is in a Cygwin special directory (e.g. /home). We need this converted to
- # a path prefixed by /cygdrive for fixpath to work.
- new_path="$CYGWIN_ROOT_PATH$input_path"
- fi
- fi
-
-
- if test "x$path" != "x$new_path"; then
- MSVCP_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVCP_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVCP_DLL to \"$new_path\"" >&6;}
- fi
-
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
-
- path="$MSVCP_DLL"
- has_colon=`$ECHO $path | $GREP ^.:`
- new_path="$path"
- if test "x$has_colon" = x; then
- # Not in mixed or Windows style, start by that.
- new_path=`cmd //c echo $path`
- fi
-
-
- input_path="$new_path"
- # Check if we need to convert this using DOS-style short mode. If the path
- # contains just simple characters, use it. Otherwise (spaces, weird characters),
- # take no chances and rewrite it.
- # Note: m4 eats our [], so we need to use [ and ] instead.
- has_forbidden_chars=`$ECHO "$input_path" | $GREP [^-_/:a-zA-Z0-9]`
- if test "x$has_forbidden_chars" != x; then
- # Now convert it to mixed DOS-style, short mode (no spaces, and / instead of \)
- new_path=`cmd /c "for %A in (\"$input_path\") do @echo %~sA"|$TR \\\\\\\\ / | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-
-
- windows_path="$new_path"
- if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
- unix_path=`$CYGPATH -u "$windows_path"`
- new_path="$unix_path"
- elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
- unix_path=`$ECHO "$windows_path" | $SED -e 's,^\\(.\\):,/\\1,g' -e 's,\\\\,/,g'`
- new_path="$unix_path"
- fi
-
- if test "x$path" != "x$new_path"; then
- MSVCP_DLL="$new_path"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MSVCP_DLL to \"$new_path\"" >&5
-$as_echo "$as_me: Rewriting MSVCP_DLL to \"$new_path\"" >&6;}
- fi
-
- # Save the first 10 bytes of this path to the storage, so fixpath can work.
- all_fixpath_prefixes=("${all_fixpath_prefixes[@]}" "${new_path:0:10}")
-
- else
- # We're on a unix platform. Hooray! :)
- path="$MSVCP_DLL"
- has_space=`$ECHO "$path" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MSVCP_DLL, which resolves as \"$path\", is invalid." >&5
-$as_echo "$as_me: The path of MSVCP_DLL, which resolves as \"$path\", is invalid." >&6;}
- as_fn_error $? "Spaces are not allowed in this path." "$LINENO" 5
- fi
-
- # Use eval to expand a potential ~
- eval path="$path"
- if test ! -f "$path" && test ! -d "$path"; then
- as_fn_error $? "The path of MSVCP_DLL, which resolves as \"$path\", is not found." "$LINENO" 5
- fi
-
- MSVCP_DLL="`cd "$path"; $THEPWDCMD -L`"
- fi
- fi
-
- MSVCP_DLL=$MSVCP_DLL
-
-
- fi
+ MSVCP_DLL="$MSVC_DLL"
+ fi
+
fi