--- a/README Mon Dec 20 13:13:52 2010 -0500
+++ b/README Tue Dec 21 14:51:50 2010 -0800
@@ -26,6 +26,6 @@
gnumake all
The resulting JDK image should be found in build/*/j2sdk-image
-where gnumake is GNU make 3.78.1 or newer, /usr/bin/make on Linux and
+where gnumake is GNU make 3.81 or newer, /usr/bin/make on Linux and
/usr/sfw/bin/gmake or /opt/sfw/bin/gmake on Solaris.
--- a/README-builds.html Mon Dec 20 13:13:52 2010 -0500
+++ b/README-builds.html Tue Dec 21 14:51:50 2010 -0800
@@ -524,7 +524,7 @@
A few notes about using GNU make:
<ul>
<li>
- In general, you need GNU make version 3.78.1 or newer.
+ In general, you need GNU make version 3.81 or newer.
</li>
<li>
Place the location of the GNU make binary in the <tt>PATH</tt>.
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/scripts/vsvars.sh Tue Dec 21 14:51:50 2010 -0800
@@ -0,0 +1,546 @@
+#!/bin/sh
+
+#
+# Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+# This file should be used to set the Visual Studio environment
+# variables normally set by the vcvars32.bat or vcvars64.bat file or
+# SetEnv.cmd for older SDKs.
+
+# Use cygpath?
+isCygwin="`uname -s | grep CYGWIN`"
+if [ "${isCygwin}" != "" ] ; then
+ cygpath="/usr/bin/cygpath"
+ cygpath_short="${cygpath} -m -s"
+ cygpath_windows="${cygpath} -w -s"
+ cygpath_path="${cygpath} -p"
+ pathsep=':'
+else
+ cygpath="dosname"
+ cygpath_short="${cygpath} -s"
+ cygpath_windows="${cygpath} -s"
+ cygpath_path="echo"
+ pathsep=';'
+fi
+
+########################################################################
+# Error functions
+msg() # message
+{
+ echo "$1" 1>&2
+}
+error() # message
+{
+ msg "ERROR: $1"
+ exit 1
+}
+warning() # message
+{
+ msg "WARNING: $1"
+}
+envpath() # path
+{
+ if [ "${cygpath_short}" != "" -a -d "$1" ] ; then
+ ${cygpath_short} "$1"
+ else
+ echo "$1"
+ fi
+}
+########################################################################
+
+
+# Defaults settings
+debug="false"
+verbose="false"
+shellStyle="sh"
+parentCsh="` ps -p ${PPID} 2> /dev/null | grep csh `"
+if [ "${parentCsh}" != "" ] ; then
+ shellStyle="csh"
+fi
+
+set -e
+
+# Check environment first
+if [ "${PROGRAMFILES}" != "" ] ; then
+ progfiles=`envpath "${PROGRAMFILES}"`
+elif [ "${ProgramFiles}" != "" ] ; then
+ progfiles=`envpath "${ProgramFiles}"`
+elif [ "${SYSTEMDRIVE}" != "" ] ; then
+ progfiles=`envpath "${SYSTEMDRIVE}/Program Files"`
+elif [ "${SystemDrive}" != "" ] ; then
+ progfiles=`envpath "${SystemDrive}/Program Files"`
+else
+ error "No PROGRAMFILES or SYSTEMDRIVE defined in environment"
+fi
+
+# Arch data model
+if [ "${PROCESSOR_IDENTIFIER}" != "" ] ; then
+ arch=`echo "${PROCESSOR_IDENTIFIER}" | cut -d' ' -f1`
+elif [ "${MACHTYPE}" != "" ] ; then
+ if [ "`echo ${MACHTYPE} | grep 64`" != "" ] ; then
+ # Assume this is X64, not IA64
+ arch="x64"
+ else
+ arch="x86"
+ fi
+else
+ arch="`uname -m`"
+fi
+if [ "${arch}" = "X86" -o \
+ "${arch}" = "386" -o "${arch}" = "i386" -o \
+ "${arch}" = "486" -o "${arch}" = "i486" -o \
+ "${arch}" = "586" -o "${arch}" = "i586" -o \
+ "${arch}" = "686" -o "${arch}" = "i686" -o \
+ "${arch}" = "86" ] ; then
+ arch="x86"
+fi
+if [ "${arch}" = "X64" -o \
+ "${arch}" = "8664" -o "${arch}" = "i8664" -o \
+ "${arch}" = "amd64" -o "${arch}" = "AMD64" -o \
+ "${arch}" = "EM64T" -o "${arch}" = "emt64t" -o \
+ "${arch}" = "intel64" -o "${arch}" = "Intel64" -o \
+ "${arch}" = "64" ] ; then
+ arch="x64"
+ binarch64="/amd64"
+fi
+if [ "${arch}" = "IA64" ] ; then
+ arch="ia64"
+ binarch64="/ia64"
+fi
+if [ "${arch}" != "x86" -a "${arch}" != "x64" -a "${arch}" != "ia64" ] ; then
+ error "No PROCESSOR_IDENTIFIER or MACHTYPE environment variables and uname -m is not helping"
+fi
+if [ "${arch}" = "x86" ] ; then
+ arch_data_model=32
+ progfiles32="${progfiles}"
+ progfiles64="${progfiles}"
+else
+ arch_data_model=64
+ progfiles32="${progfiles}"
+ if [ "${PROGRAMW6432}" != "" ] ; then
+ progfiles64=`envpath "${PROGRAMW6432}"`
+ else
+ progfiles64=`envpath "C:/Program Files"`
+ fi
+fi
+
+# VS2010 (VC10)
+if [ "${VS100COMNTOOLS}" = "" ] ; then
+ VS100COMNTOOLS="${progfiles32}/Microsoft Visual Studio 10.0/Common7/Tools/"
+ export VS100COMNTOOLS
+fi
+vc10Bin32Dir=`envpath "${VS100COMNTOOLS}"`/../../VC/Bin
+vc10Bin64Dir="${vc10Bin32Dir}${binarch64}"
+vc10vars32Bat="vcvars32.bat"
+vc10vars64Bat="vcvars64.bat"
+
+# VS2008 (VC9)
+if [ "${VS90COMNTOOLS}" = "" ] ; then
+ VS90COMNTOOLS="${progfiles32}/Microsoft Visual Studio 9.0/Common7/Tools/"
+ export VS90COMNTOOLS
+fi
+vc9Bin32Dir=`envpath "${VS90COMNTOOLS}"`/../../VC/Bin
+vc9Bin64Dir="${vc9Bin32Dir}"
+vc9vars32Bat="vcvars32.bat"
+vc9vars64Bat="vcvars64.bat"
+
+# VS2005 (VC8)
+if [ "${VS80COMNTOOLS}" = "" ] ; then
+ VS80COMNTOOLS="${progfiles32}/Microsoft Visual Studio 8.0/Common7/Tools/"
+ export VS80COMNTOOLS
+fi
+vc8Bin32Dir=`envpath "${VS80COMNTOOLS}"`/../../VC/Bin
+vc8Bin64Dir="${progfiles64}/Microsoft Platform SDK"
+vc8vars32Bat="vcvars32.bat"
+vc8vars64Bat="SetEnv.cmd /X64"
+
+# VS2003 (VC7)
+if [ "${VS71COMNTOOLS}" = "" ] ; then
+ VS71COMNTOOLS="${progfiles32}/Microsoft Visual Studio .NET 2003/Common7/Tools/"
+ export VS71COMNTOOLS
+fi
+vc7Bin32Dir=`envpath "${VS71COMNTOOLS}"`/../../VC7/Bin
+vc7Bin64Dir="${progfiles64}/Microsoft Platform SDK"
+vc7vars32Bat="vcvars32.bat"
+vc7vars64Bat="SetEnv.cmd /X64"
+
+# Force user to select
+vcSelection=""
+
+# Parse options
+usage="Usage: $0 [-help] [-debug] [-v] [-c] [-s] [-p] [-v10] [-v9] [-v8] [-v7] [-32] [-64]"
+while [ $# -gt 0 ] ; do
+ if [ "$1" = "-help" ] ; then
+ msg "${usage}"
+ msg " -help Print out this help message"
+ msg " -debug Print out extra env variables to help debug this script"
+ msg " -v Verbose output warns about missing directories"
+ msg " -c Print out csh style output"
+ msg " -s Print out sh style output"
+ msg " -p Print out properties style output"
+ msg " -v10 Use Visual Studio 10 VS2010"
+ msg " -v9 Use Visual Studio 9 VS2008"
+ msg " -v8 Use Visual Studio 8 VS2005"
+ msg " -v7 Use Visual Studio 7 VS2003"
+ msg " -32 Force 32bit"
+ msg " -64 Force 64bit"
+ exit 0
+ elif [ "$1" = "-debug" ] ; then
+ debug="true"
+ shift
+ elif [ "$1" = "-v" ] ; then
+ verbose="true"
+ shift
+ elif [ "$1" = "-c" ] ; then
+ shellStyle="csh"
+ shift
+ elif [ "$1" = "-s" ] ; then
+ shellStyle="sh"
+ shift
+ elif [ "$1" = "-p" ] ; then
+ shellStyle="props"
+ shift
+ elif [ "$1" = "-v10" ] ; then
+ vcBin32Dir="${vc10Bin32Dir}"
+ vcBin64Dir="${vc10Bin64Dir}"
+ vcvars32Bat="${vc10vars32Bat}"
+ vcvars64Bat="${vc10vars64Bat}"
+ vcSelection="10"
+ shift
+ elif [ "$1" = "-v9" ] ; then
+ vcBin32Dir="${vc9Bin32Dir}"
+ vcBin64Dir="${vc9Bin64Dir}"
+ vcvars32Bat="${vc9vars32Bat}"
+ vcvars64Bat="${vc9vars64Bat}"
+ vcSelection="9"
+ shift
+ elif [ "$1" = "-v8" ] ; then
+ vcBin32Dir="${vc8Bin32Dir}"
+ vcBin64Dir="${vc8Bin64Dir}"
+ vcvars32Bat="${vc8vars32Bat}"
+ vcvars64Bat="${vc8vars64Bat}"
+ vcSelection="8"
+ shift
+ elif [ "$1" = "-v7" ] ; then
+ vcBin32Dir="${vc7Bin32Dir}"
+ vcBin64Dir="${vc7Bin64Dir}"
+ vcvars32Bat="${vc7vars32Bat}"
+ vcvars64Bat="${vc7vars64Bat}"
+ vcSelection="7"
+ shift
+ elif [ "$1" = "-32" ] ; then
+ arch_data_model=32
+ shift
+ elif [ "$1" = "-64" ] ; then
+ arch_data_model=64
+ shift
+ else
+ msg "${usage}"
+ error "Unknown option: $1"
+ fi
+done
+
+# Need to pick
+if [ "${vcSelection}" = "" ] ; then
+ msg "${usage}"
+ error "You must pick the version"
+fi
+
+# Which vcvars bat file to run
+if [ "${arch_data_model}" = "32" ] ; then
+ vcBinDir="${vcBin32Dir}"
+ vcvarsBat="${vcvars32Bat}"
+fi
+if [ "${arch_data_model}" = "64" ] ; then
+ vcBinDir="${vcBin64Dir}"
+ vcvarsBat="${vcvars64Bat}"
+fi
+
+# Do not allow any error returns
+set -e
+
+# Different systems have different awk's
+if [ -f /usr/bin/nawk ] ; then
+ awk="nawk"
+elif [ -f /usr/bin/gawk ] ; then
+ awk="gawk"
+else
+ awk="awk"
+fi
+
+if [ "${verbose}" = "true" ] ; then
+ echo "# Welcome to verbose mode"
+ set -x
+fi
+
+if [ "${debug}" = "true" ] ; then
+ echo "# Welcome to debug mode"
+ set -x
+fi
+
+# Temp file area
+tmp="/tmp/vsvars.$$"
+rm -f -r ${tmp}
+mkdir -p ${tmp}
+
+# Check paths
+checkPaths() # var path sep
+{
+ set -e
+ sep="$3"
+ checklist="${tmp}/checklist"
+ printf "%s\n" "$2" | \
+ sed -e 's@\\@/@g' | \
+ sed -e 's@//@/@g' | \
+ ${awk} -F"${sep}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \
+ > ${checklist}
+ cat ${checklist} | while read orig; do
+ if [ "${orig}" != "" ] ; then
+ if [ ! -d "${orig}" ] ; then
+ warning "Directory in $1 does not exist: ${orig}"
+ fi
+ fi
+ done
+}
+
+# Remove all duplicate entries
+removeDeadDups() # string sep
+{
+ set -e
+ sep="$2"
+ pathlist="${tmp}/pathlist"
+ printf "%s\n" "$1" | \
+ sed -e 's@\\@/@g' | \
+ sed -e 's@//@/@g' | \
+ ${awk} -F"${sep}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \
+ > ${pathlist}
+ upaths="${tmp}/upaths"
+ cat ${pathlist} | while read orig; do
+ p="${orig}"
+ if [ "${cygpath_short}" != "" ] ; then
+ if [ "${p}" != "" ] ; then
+ if [ -d "${p}" ] ; then
+ short=`${cygpath_short} "${p}"`
+ if [ "${short}" != "" -a -d "${short}" ] ; then
+ p=`${cygpath} "${short}"`
+ fi
+ echo "${p}" >> ${upaths}
+ fi
+ fi
+ fi
+ done
+ newpaths=""
+ for i in `cat ${upaths}` ; do
+ # For some reason, \r characters can get into this
+ i=`echo "${i}" | tr -d '\r' | sed -e 's@/$@@'`
+ if [ "${newpaths}" = "" ] ; then
+ newpaths="${i}"
+ else
+ newpaths="${newpaths}${sep}${i}"
+ fi
+ done
+ printf "%s\n" "${newpaths}" | \
+ ${awk} -F"${sep}" \
+ '{a[$1];printf "%s",$1;for(i=2;i<=NF;i++){if(!($i in a)){a[$i];printf "%s%s",FS,$i;}};printf "\n";}'
+}
+
+# Create bat file to process Visual Studio vcvars*.bat files
+createBat() # batfile bindir command
+{
+ bat="$1"
+ bindir="$2"
+ command="$3"
+ stdout="${bat}.stdout"
+ rm -f ${bat} ${stdout}
+ echo "Output from: ${command}" > ${stdout}
+ bdir=`envpath "${bindir}"`
+ cat > ${bat} << EOF
+REM Pick the right vcvars bat file
+REM Empty these out so we only get the additions we want
+set INCLUDE=
+set LIB=
+set LIBPATH=
+set MSVCDIR=
+set MSSdk=
+set Mstools=
+set DevEnvDir=
+set VCINSTALLDIR=
+set VSINSTALLDIR=
+set WindowsSdkDir=
+REM Run the vcvars bat file, send all output to stderr
+call `${cygpath_windows} ${bdir}`\\${command} > `${cygpath_windows} "${stdout}"`
+REM Echo out env var settings
+echo VS_VS71COMNTOOLS="%VS71COMNTOOLS%"
+echo export VS_VS71COMNTOOLS
+echo VS_VS80COMNTOOLS="%VS80COMNTOOLS%"
+echo export VS_VS80COMNTOOLS
+echo VS_VS90COMNTOOLS="%VS90COMNTOOLS%"
+echo export VS_VS90COMNTOOLS
+echo VS_VS100COMNTOOLS="%VS100COMNTOOLS%"
+echo export VS_VS100COMNTOOLS
+echo VS_VCINSTALLDIR="%VCINSTALLDIR%"
+echo export VS_VCINSTALLDIR
+echo VS_VSINSTALLDIR="%VSINSTALLDIR%"
+echo export VS_VSINSTALLDIR
+echo VS_DEVENVDIR="%DevEnvDir%"
+echo export VS_DEVENVDIR
+echo VS_MSVCDIR="%MSVCDIR%"
+echo export VS_MSVCDIR
+echo VS_MSSDK="%MSSdk%"
+echo export VS_MSSDK
+echo VS_MSTOOLS="%Mstools%"
+echo export VS_MSTOOLS
+echo VS_WINDOWSSDKDIR="%WindowsSdkDir%"
+echo export VS_WINDOWSSDKDIR
+echo VS_INCLUDE="%INCLUDE%"
+echo export VS_INCLUDE
+echo VS_LIB="%LIB%"
+echo export VS_LIB
+echo VS_LIBPATH="%LIBPATH%"
+echo export VS_LIBPATH
+echo VS_WPATH="%PATH%"
+echo export VS_WPATH
+EOF
+ chmod a+x ${bat}
+}
+
+# Create env file
+createEnv() # batfile envfile
+{
+ rm -f ${1}.stdout
+ cmd.exe /Q /C `${cygpath_short} $1` | \
+ sed -e 's@\\@/@g' | \
+ sed -e 's@//@/@g' > $2
+ if [ -f "${1}.stdout" ] ; then
+ cat ${1}.stdout 1>&2
+ fi
+ chmod a+x $2
+}
+
+printEnv() # name pname vsname val
+{
+ name="$1"
+ pname="$2"
+ vsname="$3"
+ val="$4"
+ if [ "${val}" != "" ] ; then
+ if [ "${shellStyle}" = "csh" ] ; then
+ if [ "${debug}" = "true" ] ; then
+ echo "setenv ${vsname} \"${val}\";"
+ fi
+ echo "setenv ${name} \"${val}\";"
+ elif [ "${shellStyle}" = "sh" ] ; then
+ if [ "${debug}" = "true" ] ; then
+ echo "${vsname}=\"${val}\";"
+ echo "export ${vsname};"
+ fi
+ echo "${name}=\"${val}\";"
+ echo "export ${name};"
+ elif [ "${shellStyle}" = "props" ] ; then
+ echo "vs.${pname}=${val}"
+ fi
+ fi
+}
+
+#############################################################################
+
+# Get Visual Studio settings
+if [ "${cygpath}" != "" ] ; then
+
+ # Create bat file to run
+ batfile="${tmp}/vs-to-env.bat"
+ if [ ! -d "${vcBinDir}" ] ; then
+ error "Does not exist: ${vcBinDir}"
+ elif [ "${vcvarsBat}" = "" ] ; then
+ error "No vcvars script: ${vcvarsBat}"
+ else
+ createBat "${batfile}" "${vcBinDir}" "${vcvarsBat}"
+ fi
+
+ # Run bat file to create environment variable settings
+ envfile="${tmp}/env.sh"
+ createEnv "${batfile}" "${envfile}"
+
+ # Read in the VS_* settings
+ . ${envfile}
+
+ # Derive unix style path, save old, and define new (remove dups)
+ VS_UPATH=`${cygpath_path} "${VS_WPATH}"`
+ export VS_UPATH
+ VS_OPATH=`printf "%s" "${PATH}" | sed -e 's@\\\\@/@g'`
+ export VS_OPATH
+ VS_PATH=`removeDeadDups "${VS_UPATH}${pathsep}${VS_OPATH}" "${pathsep}"`
+ export VS_PATH
+
+fi
+
+# Adjustments due to differences in vcvars*bat files
+if [ "${VS_MSVCDIR}" = "" ] ; then
+ VS_MSVCDIR="${VS_VCINSTALLDIR}"
+fi
+if [ "${VS_DEVENVDIR}" = "" ] ; then
+ VS_DEVENVDIR="${VS_VSINSTALLDIR}"
+fi
+
+# Print env settings
+# env vs.prop vs env value
+# ------- ------- ---------- -----
+printEnv INCLUDE include VS_INCLUDE "${VS_INCLUDE}"
+printEnv LIB lib VS_LIB "${VS_LIB}"
+printEnv LIBPATH libpath VS_LIBPATH "${VS_LIBPATH}"
+if [ "${debug}" = "true" ] ; then
+ printEnv UPATH upath VS_UPATH "${VS_UPATH}"
+ printEnv WPATH wpath VS_WPATH "${VS_WPATH}"
+ printEnv OPATH opath VS_OPATH "${VS_OPATH}"
+fi
+printEnv PATH path VS_PATH "${VS_PATH}"
+printEnv VCINSTALLDIR vcinstalldir VS_VCINSTALLDIR "${VS_VCINSTALLDIR}"
+printEnv VSINSTALLDIR vsinstalldir VS_VSINSTALLDIR "${VS_VSINSTALLDIR}"
+printEnv MSVCDIR msvcdir VS_MSVCDIR "${VS_MSVCDIR}"
+printEnv MSSDK mssdk VS_MSSDK "${VS_MSSDK}"
+printEnv MSTOOLS mstools VS_MSTOOLS "${VS_MSTOOLS}"
+printEnv DEVENVDIR devenvdir VS_DEVENVDIR "${VS_DEVENVDIR}"
+printEnv WINDOWSSDKDIR windowssdkdir VS_WINDOWSSDKDIR "${VS_WINDOWSSDKDIR}"
+if [ "${vcSelection}" = "10" ] ; then
+ printEnv VS100COMNTOOLS vs100comntools VS_VS100COMNTOOLS "${VS_VS100COMNTOOLS}"
+elif [ "${vcSelection}" = "9" ] ; then
+ printEnv VS90COMNTOOLS vs90comntools VS_VS90COMNTOOLS "${VS_VS90COMNTOOLS}"
+elif [ "${vcSelection}" = "7" ] ; then
+ printEnv VS71COMNTOOLS vs71comntools VS_VS71COMNTOOLS "${VS_VS71COMNTOOLS}"
+elif [ "${vcSelection}" = "8" ] ; then
+ printEnv VS80COMNTOOLS vs80comntools VS_VS80COMNTOOLS "${VS_VS80COMNTOOLS}"
+fi
+
+# Check final settings
+if [ "${verbose}" = "true" ] ; then
+ checkPaths "Windows PATH" "${VS_WPATH}" ";"
+ checkPaths LIB "${VS_LIB}" ";"
+ checkPaths INCLUDE "${VS_INCLUDE}" ";"
+ checkPaths PATH "${VS_PATH}" "${pathsep}"
+fi
+
+# Remove all temp files
+rm -f -r ${tmp}
+
+exit 0
+
--- a/make/templates/bsd-header Mon Dec 20 13:13:52 2010 -0500
+++ b/make/templates/bsd-header Tue Dec 21 14:51:50 2010 -0800
@@ -1,4 +1,4 @@
-Copyright %YEARS% Sun Microsystems, Inc. All Rights Reserved.
+Copyright (c) %YEARS% Oracle and/or its affiliates. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
@@ -26,3 +26,4 @@
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
--- a/make/templates/gpl-cp-header Mon Dec 20 13:13:52 2010 -0500
+++ b/make/templates/gpl-cp-header Tue Dec 21 14:51:50 2010 -0800
@@ -1,4 +1,4 @@
-Copyright %YEARS% Sun Microsystems, Inc. All Rights Reserved.
+Copyright (c) %YEARS% Oracle and/or its affiliates. All rights reserved.
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
This code is free software; you can redistribute it and/or modify it
@@ -20,3 +20,4 @@
Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
or visit www.oracle.com if you need additional information or have any
questions.
+
--- a/make/templates/gpl-header Mon Dec 20 13:13:52 2010 -0500
+++ b/make/templates/gpl-header Tue Dec 21 14:51:50 2010 -0800
@@ -1,4 +1,4 @@
-Copyright %YEARS% Sun Microsystems, Inc. All Rights Reserved.
+Copyright (c) %YEARS% Oracle and/or its affiliates. All rights reserved.
DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
This code is free software; you can redistribute it and/or modify it
@@ -18,3 +18,4 @@
Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
or visit www.oracle.com if you need additional information or have any
questions.
+