--- a/Makefile Wed Jul 05 20:26:30 2017 +0200
+++ b/Makefile Fri Apr 03 16:33:01 2015 -0700
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -23,200 +23,42 @@
# questions.
#
-# This must be the first rule
-default:
+###
+### This file is just a very small wrapper needed to run the real make/Init.gmk.
+### It also performs some sanity checks on make.
+###
-# Inclusion of this pseudo-target will cause make to execute this file
-# serially, regardless of -j. Recursively called makefiles will not be
-# affected, however. This is required for correct dependency management.
-.NOTPARALLEL:
+# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU Make.
+# /usr/ccs/bin/make lacks basically every other flow control mechanism.
+.TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU Make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
-# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make.
-# /usr/ccs/bin/make lacks basically every other flow control mechanism.
-.TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
+# The .FEATURES variable is likely to be unique for GNU Make.
+ifeq ($(.FEATURES), )
+ $(info Error: '$(MAKE)' does not seem to be GNU Make, which is a requirement.)
+ $(info Check your path, or upgrade to GNU Make 3.81 or newer.)
+ $(error Cannot continue)
+endif
-# Assume we have GNU make, but check version.
+# Assume we have GNU Make, but check version.
ifeq ($(strip $(foreach v, 3.81% 3.82% 4.%, $(filter $v, $(MAKE_VERSION)))), )
- $(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
+ $(info Error: This version of GNU Make is too low ($(MAKE_VERSION)).)
+ $(info Check your path, or upgrade to GNU Make 3.81 or newer.)
+ $(error Cannot continue)
+endif
+
+# In Cygwin, the MAKE variable gets prepended with the current directory if the
+# make executable is called using a Windows mixed path (c:/cygwin/bin/make.exe).
+ifneq ($(findstring :, $(MAKE)), )
+ MAKE := $(patsubst $(CURDIR)%, %, $(patsubst $(CURDIR)/%, %, $(MAKE)))
endif
# Locate this Makefile
-ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
- makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
+ifeq ($(filter /%, $(lastword $(MAKEFILE_LIST))),)
+ makefile_path := $(CURDIR)/$(strip $(lastword $(MAKEFILE_LIST)))
else
- makefile_path:=$(lastword $(MAKEFILE_LIST))
-endif
-root_dir:=$(patsubst %/,%,$(dir $(makefile_path)))
-
-ifeq ($(MAIN_TARGETS), )
- COMMAND_LINE_VARIABLES:=$(subst =command,,$(filter %=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var))))))
- MAKE_CONTROL_VARIABLES:=LOG CONF SPEC JOBS TEST IGNORE_OLD_CONFIG
- UNKNOWN_COMMAND_LINE_VARIABLES:=$(strip $(filter-out $(MAKE_CONTROL_VARIABLES), $(COMMAND_LINE_VARIABLES)))
- ifneq ($(UNKNOWN_COMMAND_LINE_VARIABLES), )
- $(info Note: Command line contains non-control variables: $(UNKNOWN_COMMAND_LINE_VARIABLES).)
- $(info Make sure it is not mistyped, and that you intend to override this variable.)
- $(info 'make help' will list known control variables)
- endif
-endif
-
-ifneq ($(findstring qp,$(MAKEFLAGS)),)
- # When called with -qp, assume an external part (e.g. bash completion) is trying
- # to understand our targets.
- # Duplication of global targets, needed before ParseConfAndSpec in case we have
- # no configurations.
- help:
- # If both CONF and SPEC are unset, look for all available configurations by
- # setting CONF to the empty string.
- ifeq ($(SPEC), )
- CONF?=
- endif
+ makefile_path := $(lastword $(MAKEFILE_LIST))
endif
-
-# ... and then we can include our helper functions
-include $(root_dir)/make/MakeHelpers.gmk
-
-$(eval $(call ParseLogLevel))
-$(eval $(call ParseConfAndSpec))
-
-# Now determine if we have zero, one or several configurations to build.
-ifeq ($(SPEC),)
- # Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
-else
- # In Cygwin, the MAKE variable gets messed up if the make executable is called with
- # a Windows mixed path (c:/cygwin/bin/make.exe). If that's the case, fix it by removing
- # the prepended root_dir.
- ifneq ($(findstring :, $(MAKE)), )
- MAKE := $(patsubst $(root_dir)%, %, $(MAKE))
- endif
-
- # We are potentially building multiple configurations.
- # First, find out the valid targets
- # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
- # available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
- all_phony_targets := $(sort $(filter-out $(global_targets), $(strip $(shell \
- cd $(root_dir)/make && $(MAKE) -f Main.gmk -p -q FRC SPEC=$(firstword $(SPEC)) \
- -I $(root_dir)/make/common | grep "^.PHONY:" | head -n 1 | cut -d " " -f 2-))))
-
- # Loop through the configurations and call the main-wrapper for each one. The wrapper
- # target will execute with a single configuration loaded.
- $(all_phony_targets):
- @$(if $(TARGET_RUN),,\
- $(foreach spec,$(SPEC),\
- (cd $(root_dir) && $(MAKE) SPEC=$(spec) MAIN_TARGETS="$(call GetRealTarget)" \
- $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) main-wrapper) &&) true)
- @echo > /dev/null
- $(eval TARGET_RUN=true)
-
- .PHONY: $(all_phony_targets)
-
- ifneq ($(MAIN_TARGETS), )
- # The wrapper target was called so we now have a single configuration. Load the spec file
- # and call the real Main.gmk.
- include $(SPEC)
- include $(SRC_ROOT)/make/common/MakeBase.gmk
+topdir := $(strip $(patsubst %/, %, $(dir $(makefile_path))))
- ### Clean up from previous run
- # Remove any build.log from a previous run, if they exist
- ifneq (,$(BUILD_LOG))
- ifneq (,$(BUILD_LOG_PREVIOUS))
- # Rotate old log
- $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
- $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
- else
- $(shell $(RM) $(BUILD_LOG) 2> /dev/null)
- endif
- $(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
- endif
- # Remove any javac server logs and port files. This
- # prevents a new make run to reuse the previous servers.
- ifneq (,$(SJAVAC_SERVER_DIR))
- $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
- endif
-
- # Split out the targets requiring sequential execution. Run these targets separately
- # from the rest so that the rest may still enjoy full parallel execution.
- SEQUENTIAL_TARGETS := $(filter dist-clean clean% reconfigure, $(MAIN_TARGETS))
- PARALLEL_TARGETS := $(filter-out $(SEQUENTIAL_TARGETS), $(MAIN_TARGETS))
-
- main-wrapper:
- ifneq ($(SEQUENTIAL_TARGETS), )
- (cd $(SRC_ROOT)/make && $(MAKE) -f Main.gmk SPEC=$(SPEC) -j 1 \
- $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $(SEQUENTIAL_TARGETS))
- endif
- ifneq ($(PARALLEL_TARGETS), )
- @$(call AtMakeStart)
- (cd $(SRC_ROOT)/make && $(BUILD_LOG_WRAPPER) $(MAKE) -f Main.gmk SPEC=$(SPEC) -j $(JOBS) \
- $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $(PARALLEL_TARGETS) \
- $(if $(filter true, $(OUTPUT_SYNC_SUPPORTED)), -O$(OUTPUT_SYNC)))
- @$(call AtMakeEnd)
- endif
-
- .PHONY: main-wrapper
-
- endif
-endif
-
-# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration.
-# If you add more global targets, please update the variable global_targets in MakeHelpers.
-
-# Helper macro to allow $(info) to properly print strings beginning with spaces.
-_:=
-
-help:
- $(info )
- $(info OpenJDK Makefile help)
- $(info =====================)
- $(info )
- $(info Common make targets)
- $(info $(_) make [default] # Compile all modules in langtools, hotspot, jdk, jaxws,)
- $(info $(_) # jaxp and corba, and create a runnable "exploded" image)
- $(info $(_) make all # Compile everything, all repos, docs and images)
- $(info $(_) make images # Create complete j2sdk and j2re images)
- $(info $(_) make <phase> # Build the specified phase and everything it depends on)
- $(info $(_) # (gensrc, java, copy, libs, launchers, gendata, rmic))
- $(info $(_) make *-only # Applies to most targets and disables compling the)
- $(info $(_) # dependencies for the target. This is faster but may)
- $(info $(_) # result in incorrect build results!)
- $(info $(_) make docs # Create all docs)
- $(info $(_) make docs-javadoc # Create just javadocs, depends on less than full docs)
- $(info $(_) make profiles # Create complete j2re compact profile images)
- $(info $(_) make bootcycle-images # Build images twice, second time with newly built JDK)
- $(info $(_) make install # Install the generated images locally)
- $(info $(_) make reconfigure # Rerun configure with the same arguments as last time)
- $(info $(_) make help # Give some help on using make)
- $(info $(_) make test # Run tests, default is all tests (see TEST below))
- $(info )
- $(info Targets for cleaning)
- $(info $(_) make clean # Remove all files generated by make, but not those)
- $(info $(_) # generated by configure)
- $(info $(_) make dist-clean # Remove all files, including configuration)
- $(info $(_) make clean-<outputdir> # Remove the subdir in the output dir with the name)
- $(info $(_) make clean-<phase> # Remove all build results related to a certain build)
- $(info $(_) # phase (gensrc, java, libs, launchers))
- $(info $(_) make clean-<module> # Remove all build results related to a certain module)
- $(info $(_) make clean-<module>-<phase> # Remove all build results related to a certain)
- $(info $(_) # module and phase)
- $(info )
- $(info Targets for specific modules)
- $(info $(_) make <module> # Build <module> and everything it depends on.)
- $(info $(_) make <module>-<phase> # Compile the specified phase for the specified module)
- $(info $(_) # and everything it depends on)
- $(info $(_) # (gensrc, java, copy, libs, launchers, gendata, rmic))
- $(info )
- $(info Make control variables)
- $(info $(_) CONF= # Build all configurations (note, assignment is empty))
- $(info $(_) CONF=<substring> # Build the configuration(s) with a name matching)
- $(info $(_) # <substring>)
- $(info $(_) SPEC=<spec file> # Build the configuration given by the spec file)
- $(info $(_) LOG=<loglevel> # Change the log level from warn to <loglevel>)
- $(info $(_) # Available log levels are:)
- $(info $(_) # 'warn' (default), 'info', 'debug' and 'trace')
- $(info $(_) # To see executed command lines, use LOG=debug)
- $(info $(_) JOBS=<n> # Run <n> parallel make jobs)
- $(info $(_) # Note that -jN does not work as expected!)
- $(info $(_) IGNORE_OLD_CONFIG=true # Skip tests if spec file is up to date)
- $(info $(_) make test TEST=<test> # Only run the given test or tests, e.g.)
- $(info $(_) # make test TEST="jdk_lang jdk_net")
- $(info )
-
-.PHONY: help
+# ... and then we can include the real makefile
+include $(topdir)/make/Init.gmk
--- a/common/autoconf/basics.m4 Wed Jul 05 20:26:30 2017 +0200
+++ b/common/autoconf/basics.m4 Fri Apr 03 16:33:01 2015 -0700
@@ -78,7 +78,7 @@
AC_DEFUN([BASIC_FIXUP_PATH],
[
# Only process if variable expands to non-empty
-
+
if test "x[$]$1" != x; then
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
BASIC_FIXUP_PATH_CYGWIN($1)
@@ -118,7 +118,7 @@
AC_DEFUN([BASIC_FIXUP_EXECUTABLE],
[
# Only process if variable expands to non-empty
-
+
if test "x[$]$1" != x; then
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
BASIC_FIXUP_EXECUTABLE_CYGWIN($1)
@@ -459,12 +459,21 @@
AC_MSG_RESULT([$TOPDIR])
AC_SUBST(TOPDIR)
+ # Save the original version of TOPDIR for string comparisons
+ ORIGINAL_TOPDIR="$TOPDIR"
+ AC_SUBST(ORIGINAL_TOPDIR)
+
# We can only call BASIC_FIXUP_PATH after BASIC_CHECK_PATHS_WINDOWS.
BASIC_FIXUP_PATH(CURDIR)
BASIC_FIXUP_PATH(TOPDIR)
# SRC_ROOT is a traditional alias for TOPDIR.
SRC_ROOT=$TOPDIR
+ # Calculate a canonical version of TOPDIR for string comparisons
+ CANONICAL_TOPDIR=$TOPDIR
+ BASIC_REMOVE_SYMBOLIC_LINKS([CANONICAL_TOPDIR])
+ AC_SUBST(CANONICAL_TOPDIR)
+
# Locate the directory of this script.
AUTOCONF_DIR=$TOPDIR/common/autoconf
])
@@ -709,18 +718,6 @@
AC_CONFIG_FILES([$OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in])
])
-AC_DEFUN_ONCE([BASIC_SETUP_LOGGING],
-[
- # Setup default logging of stdout and stderr to build.log in the output root.
- BUILD_LOG='$(OUTPUT_ROOT)/build.log'
- BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
- BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
- AC_SUBST(BUILD_LOG)
- AC_SUBST(BUILD_LOG_PREVIOUS)
- AC_SUBST(BUILD_LOG_WRAPPER)
-])
-
-
#%%% Simple tools %%%
# Check if we have found a usable version of make
--- a/common/autoconf/configure.ac Wed Jul 05 20:26:30 2017 +0200
+++ b/common/autoconf/configure.ac Fri Apr 03 16:33:01 2015 -0700
@@ -1,5 +1,5 @@
#
-# Copyright (c) 2011, 2014, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -88,7 +88,6 @@
# Continue setting up basic stuff. Most remaining code require fundamental tools.
BASIC_SETUP_PATHS
-BASIC_SETUP_LOGGING
# Check if it's a pure open build or if custom sources are to be used.
JDKOPT_SETUP_OPEN_OR_CUSTOM
--- a/common/autoconf/generated-configure.sh Wed Jul 05 20:26:30 2017 +0200
+++ b/common/autoconf/generated-configure.sh Fri Apr 03 16:33:01 2015 -0700
@@ -907,9 +907,8 @@
JVM_INTERPRETER
JDK_VARIANT
SET_OPENJDK
-BUILD_LOG_WRAPPER
-BUILD_LOG_PREVIOUS
-BUILD_LOG
+CANONICAL_TOPDIR
+ORIGINAL_TOPDIR
TOPDIR
PATH_SEP
ZERO_ARCHDEF
@@ -3471,9 +3470,6 @@
-
-
-
#%%% Simple tools %%%
# Check if we have found a usable version of make
@@ -14141,6 +14137,10 @@
$as_echo "$TOPDIR" >&6; }
+ # Save the original version of TOPDIR for string comparisons
+ ORIGINAL_TOPDIR="$TOPDIR"
+
+
# We can only call BASIC_FIXUP_PATH after BASIC_CHECK_PATHS_WINDOWS.
# Only process if variable expands to non-empty
@@ -14397,19 +14397,62 @@
# SRC_ROOT is a traditional alias for TOPDIR.
SRC_ROOT=$TOPDIR
+ # Calculate a canonical version of TOPDIR for string comparisons
+ CANONICAL_TOPDIR=$TOPDIR
+
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ CANONICAL_TOPDIR=`$READLINK -f $CANONICAL_TOPDIR`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $CANONICAL_TOPDIR`
+ sym_link_file=`$BASENAME $CANONICAL_TOPDIR`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ CANONICAL_TOPDIR=$sym_link_dir/$sym_link_file
+ fi
+ fi
+
+
+
# Locate the directory of this script.
AUTOCONF_DIR=$TOPDIR/common/autoconf
- # Setup default logging of stdout and stderr to build.log in the output root.
- BUILD_LOG='$(OUTPUT_ROOT)/build.log'
- BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
- BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
-
-
-
-
-
# Check if it's a pure open build or if custom sources are to be used.
# Check whether --enable-openjdk-only was given.
--- a/common/autoconf/spec.gmk.in Wed Jul 05 20:26:30 2017 +0200
+++ b/common/autoconf/spec.gmk.in Fri Apr 03 16:33:01 2015 -0700
@@ -55,25 +55,12 @@
# A self-referential reference to this file.
SPEC:=@SPEC@
-# Specify where the spec file is.
-MAKE_ARGS="SPEC=$(SPEC)"
-
-MAKE:=@MAKE@
-
-# Pass along the verbosity and log level settings.
-ifeq (,$(findstring VERBOSE=,$(MAKE)))
- MAKE:=$(MAKE) $(VERBOSE) VERBOSE="$(VERBOSE)" LOG_LEVEL="$(LOG_LEVEL)"
-endif
+# What make to use for main processing, after bootstrapping top-level Makefile.
+MAKE := @MAKE@
-# No implicit variables or rules!
-ifeq (,$(findstring -R,$(MAKE)))
- MAKE:=$(MAKE) -R
-endif
-
-# Specify where the common include directory for makefiles is.
-ifeq (,$(findstring -I @TOPDIR@/make/common,$(MAKE)))
- MAKE:=$(MAKE) -I @TOPDIR@/make/common
-endif
+# The default make arguments
+MAKE_ARGS = $(MAKE_LOG_FLAGS) -R -I $(TOPDIR)/make/common SPEC=$(SPEC) \
+ MAKE_LOG_FLAGS="$(MAKE_LOG_FLAGS)" LOG_LEVEL=$(LOG_LEVEL)
OUTPUT_SYNC_SUPPORTED:=@OUTPUT_SYNC_SUPPORTED@
OUTPUT_SYNC:=@OUTPUT_SYNC@
@@ -146,6 +133,9 @@
# The top-level directory of the forest (SRC_ROOT is a traditional alias)
TOPDIR:=@TOPDIR@
+# These two versions of TOPDIR are used in string comparisons
+ORIGINAL_TOPDIR:=@ORIGINAL_TOPDIR@
+CANONICAL_TOPDIR:=@CANONICAL_TOPDIR@
SRC_ROOT:=@TOPDIR@
OUTPUT_ROOT:=@OUTPUT_ROOT@
@@ -573,18 +563,6 @@
XCODEBUILD=@XCODEBUILD@
FIXPATH:=@FIXPATH@
-# Where the build output is stored for your convenience.
-BUILD_LOG:=@BUILD_LOG@
-BUILD_LOG_PREVIOUS:=@BUILD_LOG_PREVIOUS@
-# Disable the build log wrapper on sjavac+windows until
-# we have solved how to prevent the log wrapper to wait
-# for the background sjavac server process.
-ifeq (@ENABLE_SJAVAC@X@OPENJDK_BUILD_OS@,yesXwindows)
- BUILD_LOG_WRAPPER:=
-else
- BUILD_LOG_WRAPPER:=@BUILD_LOG_WRAPPER@
-endif
-
# Build setup
ENABLE_JFR=@ENABLE_JFR@
ENABLE_INTREE_EC=@ENABLE_INTREE_EC@
--- a/configure Wed Jul 05 20:26:30 2017 +0200
+++ b/configure Fri Apr 03 16:33:01 2015 -0700
@@ -31,4 +31,5 @@
# Delegate to wrapper, forcing wrapper to believe $0 is this script by using -c.
# This trick is needed to get autoconf to co-operate properly.
-bash -c ". $this_script_dir/common/autoconf/configure" $this_script_dir/configure CHECKME $this_script_dir "$@"
+# The ${-:+-$-} construction passes on bash options.
+bash ${-:+-$-} -c ". $this_script_dir/common/autoconf/configure" $this_script_dir/configure CHECKME $this_script_dir "$@"
--- a/make/CompileJavaModules.gmk Wed Jul 05 20:26:30 2017 +0200
+++ b/make/CompileJavaModules.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -151,9 +151,19 @@
ifeq ($(OPENJDK_TARGET_OS), macosx)
# exclude all X11 on Mac.
- java.desktop_EXCLUDES += sun/awt/X11
+ java.desktop_EXCLUDES += \
+ sun/awt/X11 \
+ sun/java2d/x11 \
+ sun/java2d/jules \
+ sun/java2d/xr \
+ com/sun/java/swing/plaf/gtk \
+ #
java.desktop_EXCLUDE_FILES += \
- $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/java2d/BackBufferCapsProvider.java \
+ $(wildcard $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/java2d/*.java) \
+ $(wildcard $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/java2d/opengl/*.java) \
+ $(wildcard $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/awt/*.java) \
+ $(wildcard $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/awt/motif/*.java) \
+ $(wildcard $(JDK_TOPDIR)/src/java.desktop/unix/classes/sun/font/*.java) \
#
else
# TBD: figure out how to eliminate this long list
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/Help.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -0,0 +1,115 @@
+#
+# Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+###
+### Global targets for printing help etc.
+###
+
+# Helper macro to allow $(info) to properly print strings beginning with spaces.
+_:=
+
+help:
+ $(info )
+ $(info OpenJDK Makefile help)
+ $(info =====================)
+ $(info )
+ $(info Common make targets)
+ $(info $(_) make [default] # Compile all modules in langtools, hotspot, jdk, jaxws,)
+ $(info $(_) # jaxp and corba, and create a runnable "exploded" image)
+ $(info $(_) make all # Compile everything, all repos, docs and images)
+ $(info $(_) make images # Create complete jdk and jre images)
+ $(info $(_) make <phase> # Build the specified phase and everything it depends on)
+ $(info $(_) # (gensrc, java, copy, libs, launchers, gendata, rmic))
+ $(info $(_) make *-only # Applies to most targets and disables compling the)
+ $(info $(_) # dependencies for the target. This is faster but may)
+ $(info $(_) # result in incorrect build results!)
+ $(info $(_) make docs # Create all docs)
+ $(info $(_) make docs-javadoc # Create just javadocs, depends on less than full docs)
+ $(info $(_) make profiles # Create complete jre compact profile images)
+ $(info $(_) make bootcycle-images # Build images twice, second time with newly built JDK)
+ $(info $(_) make install # Install the generated images locally)
+ $(info $(_) make reconfigure # Rerun configure with the same arguments as last time)
+ $(info $(_) make help # Give some help on using make)
+ $(info $(_) make test # Run tests, default is all tests (see TEST below))
+ $(info )
+ $(info Targets for cleaning)
+ $(info $(_) make clean # Remove all files generated by make, but not those)
+ $(info $(_) # generated by configure)
+ $(info $(_) make dist-clean # Remove all files, including configuration)
+ $(info $(_) make clean-<outputdir> # Remove the subdir in the output dir with the name)
+ $(info $(_) make clean-<phase> # Remove all build results related to a certain build)
+ $(info $(_) # phase (gensrc, java, libs, launchers))
+ $(info $(_) make clean-<module> # Remove all build results related to a certain module)
+ $(info $(_) make clean-<module>-<phase> # Remove all build results related to a certain)
+ $(info $(_) # module and phase)
+ $(info )
+ $(info Targets for specific modules)
+ $(info $(_) make <module> # Build <module> and everything it depends on)
+ $(info $(_) make <module>-<phase> # Compile the specified phase for the specified module)
+ $(info $(_) # and everything it depends on)
+ $(info $(_) # (gensrc, java, copy, libs, launchers, gendata, rmic))
+ $(info )
+ $(info Make control variables)
+ $(info $(_) CONF= # Build all configurations (note, assignment is empty))
+ $(info $(_) CONF=<substring> # Build the configuration(s) with a name matching)
+ $(info $(_) # <substring>)
+ $(info $(_) SPEC=<spec file> # Build the configuration given by the spec file)
+ $(info $(_) LOG=<loglevel> # Change the log level from warn to <loglevel>)
+ $(info $(_) # Available log levels are:)
+ $(info $(_) # 'warn' (default), 'info', 'debug' and 'trace')
+ $(info $(_) # To see executed command lines, use LOG=debug)
+ $(info $(_) JOBS=<n> # Run <n> parallel make jobs)
+ $(info $(_) # Note that -jN does not work as expected!)
+ $(info $(_) CONF_CHECK=<method> # What to do if spec file is out of date)
+ $(info $(_) # method is 'auto', 'ignore' or 'fail' (default))
+ $(info $(_) make test TEST=<test> # Only run the given test or tests, e.g.)
+ $(info $(_) # make test TEST="jdk_lang jdk_net")
+ $(info )
+ $(if $(all_confs), $(info Available configurations in $(build_dir):) $(foreach var,$(all_confs),$(info * $(var))),\
+ $(info No configurations were found in $(build_dir).) $(info Run 'bash configure' to create a configuration))
+ # We need a dummy rule otherwise make will complain
+ @true
+
+print-targets:
+ $(if $(any_spec_file), ,\
+ @echo "Note: More targets will be available when at least one configuration exists." 1>&2\
+ )
+ @echo $(ALL_TARGETS)
+
+print-modules:
+ $(if $(any_spec_file), \
+ @$(MAKE) -s -f $(topdir)/make/Main.gmk -I $(topdir)/make/common SPEC=$(any_spec_file) print-modules \
+ , \
+ @echo print-modules can currently only be run when at least one configuration exists \
+ )
+
+print-configurations:
+ $(foreach var, $(all_confs), $(info $(var)))
+ # We need a dummy rule otherwise make will complain
+ @true
+
+ALL_GLOBAL_TARGETS := help print-modules print-targets print-configurations
+
+.PHONY: $(ALL_GLOBAL_TARGETS)
--- a/make/HotspotWrapper.gmk Wed Jul 05 20:26:30 2017 +0200
+++ b/make/HotspotWrapper.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -42,7 +42,7 @@
# not doing it breaks builds on msys.
$(HOTSPOT_OUTPUTDIR)/_hotspot.timestamp: $(HOTSPOT_FILES)
@$(MKDIR) -p $(HOTSPOT_OUTPUTDIR)
- @($(CD) $(HOTSPOT_TOPDIR)/make && $(MAKE) $(HOTSPOT_MAKE_ARGS) SPEC=$(HOTSPOT_SPEC) BASE_SPEC=$(BASE_SPEC))
+ @($(CD) $(HOTSPOT_TOPDIR)/make && $(MAKE) $(HOTSPOT_MAKE_ARGS) LOG_LEVEL=$(LOG_LEVEL) SPEC=$(HOTSPOT_SPEC) BASE_SPEC=$(BASE_SPEC))
$(TOUCH) $@
hotspot: $(HOTSPOT_OUTPUTDIR)/_hotspot.timestamp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/Init.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -0,0 +1,229 @@
+#
+# Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+################################################################################
+# This is the bootstrapping part of the build. This file is included from the
+# top level Makefile, and is responsible for launching the Main.gmk file with
+# the proper make and the proper make arguments.
+################################################################################
+
+# This must be the first rule
+default:
+.PHONY: default
+
+# Inclusion of this pseudo-target will cause make to execute this file
+# serially, regardless of -j.
+.NOTPARALLEL:
+
+# If included from the top-level Makefile then topdir is set, but not when
+# recursively calling ourself with a spec.
+ifeq ($(topdir),)
+ topdir := $(strip $(patsubst %/make/, %, $(dir $(lastword $(MAKEFILE_LIST)))))
+endif
+
+# Our helper functions. Will include $(SPEC) if $(HAS_SPEC) is true.
+include $(topdir)/make/InitSupport.gmk
+
+# Here are "global" targets, i.e. targets that can be executed without having a configuration.
+# This will define ALL_GLOBAL_TARGETS.
+include $(topdir)/make/Help.gmk
+
+# Extract main targets from Main.gmk.
+ifneq ($(any_spec_file), )
+ ifeq ($(wildcard $(dir $(any_spec_file))/make-support/module-deps.gmk),)
+ # If make-support does not exist, we need to build the genmodules java tool first.
+ $(info Creating data for first make execution in new configuration...)
+ ignore_output := $(shell $(MAKE) -r -R -f $(topdir)/make/Main.gmk \
+ -I $(topdir)/make/common SPEC=$(any_spec_file) NO_RECIPES=true FRC)
+ $(info Done)
+ endif
+ ALL_MAIN_TARGETS := $(shell $(MAKE) -r -R -f $(topdir)/make/Main.gmk \
+ -I $(topdir)/make/common SPEC=$(any_spec_file) NO_RECIPES=true print-targets)
+else
+ # Without at least a single valid configuration, we cannot extract any real
+ # targets. To provide a helpful error message about the missing configuration
+ # later on, accept whatever targets the user has provided for now.
+ ALL_MAIN_TARGETS := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), default)
+endif
+
+# Targets provided by this file.
+ALL_INIT_TARGETS := reconfigure
+
+ALL_TARGETS := $(sort $(ALL_GLOBAL_TARGETS) $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS))
+
+ifneq ($(findstring qp, $(MAKEFLAGS)),)
+ ##############################################################################
+ # When called with -qp, assume an external part (e.g. bash completion) is trying
+ # to understand our targets. Just list our targets and do no more checking.
+ ##############################################################################
+
+ $(ALL_TARGETS):
+
+ .PHONY: $(ALL_TARGETS)
+
+else ifeq ($(HAS_SPEC),)
+
+ ##############################################################################
+ # This is the normal case, we have been called from the command line by the
+ # user and we need to call ourself back with a proper SPEC.
+ ##############################################################################
+
+ $(eval $(call CheckControlVariables))
+ $(eval $(call CheckDeprecatedEnvironment))
+ $(eval $(call CheckInvalidMakeFlags))
+
+ $(eval $(call ParseConfCheckOption))
+
+ # Check that the LOG given is valid, and set LOG_LEVEL, LOG_NOFILE and MAKE_LOG_FLAGS.
+ $(eval $(call ParseLogLevel))
+
+ ifneq ($(findstring $(LOG_LEVEL),info debug trace),)
+ $(info Running make as '$(strip $(MAKE) $(MFLAGS) $(COMMAND_LINE_VARIABLES) $(MAKECMDGOALS))')
+ endif
+
+ # CALLED_TARGETS is the list of targets that the user provided,
+ # or "default" if unspecified.
+ CALLED_TARGETS := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), default)
+ CALLED_SPEC_TARGETS := $(filter $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS), $(CALLED_TARGETS))
+ ifneq ($(CALLED_SPEC_TARGETS),)
+ # We have at least one non-global target, which need a SPEC
+ $(eval $(call ParseConfAndSpec))
+ # Now SPECS contain 1..N spec files (otherwise ParseConfAndSpec fails)
+
+ INIT_TARGETS := $(filter $(ALL_INIT_TARGETS), $(CALLED_SPEC_TARGETS))
+ SEQUENTIAL_TARGETS := $(filter dist-clean clean%, $(CALLED_SPEC_TARGETS))
+ PARALLEL_TARGETS := $(filter-out $(INIT_TARGETS) $(SEQUENTIAL_TARGETS), $(CALLED_SPEC_TARGETS))
+
+ # The spec files depend on the autoconf source code. This check makes sure
+ # the configuration is up to date after changes to configure.
+ $(SPECS): $(wildcard $(topdir)/common/autoconf/*)
+ ifeq ($(CONF_CHECK), fail)
+ @echo "Error: The configuration is not up to date for '$(lastword $(subst /, , $(dir $@)))'."
+ $(call PrintConfCheckFailed)
+ @exit 2
+ else ifeq ($(CONF_CHECK), auto)
+ @echo "Note: The configuration is not up to date for '$(lastword $(subst /, , $(dir $@)))'."
+ @( cd $(topdir) && \
+ $(MAKE) $(MFLAGS) $(MAKE_LOG_FLAGS) -f $(topdir)/make/Init.gmk SPEC=$@ HAS_SPEC=true \
+ reconfigure )
+ else ifeq ($(CONF_CHECK), ignore)
+ # Do nothing
+ endif
+
+ # Unless reconfigure is explicitely called, let all targets depend on the spec files to be up to date.
+ ifeq ($(findstring reconfigure, $(CALLED_SPEC_TARGETS)), )
+ $(CALLED_SPEC_TARGETS): $(SPECS)
+ endif
+
+ # The recipe will be run once for every target specified, but we only want to execute the
+ # recipe a single time, hence the TARGET_DONE with a dummy command if true.
+ $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS):
+ @$(if $(TARGET_DONE), \
+ true \
+ , \
+ $(foreach spec, $(SPECS), \
+ ( cd $(topdir) && \
+ $(MAKE) $(MFLAGS) $(MAKE_LOG_FLAGS) -j 1 -f $(topdir)/make/Init.gmk \
+ SPEC=$(spec) HAS_SPEC=true \
+ USER_MAKE_VARS="$(USER_MAKE_VARS)" MAKE_LOG_FLAGS=$(MAKE_LOG_FLAGS) \
+ LOG_LEVEL=$(LOG_LEVEL) LOG_NOFILE=$(LOG_NOFILE) \
+ INIT_TARGETS="$(INIT_TARGETS)" SEQUENTIAL_TARGETS="$(SEQUENTIAL_TARGETS)" \
+ PARALLEL_TARGETS="$(PARALLEL_TARGETS)" \
+ main ) && \
+ ) true \
+ $(eval TARGET_DONE=true) \
+ )
+
+ .PHONY: $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS)
+
+ endif # has $(CALLED_SPEC_TARGETS)
+
+else # HAS_SPEC=true
+
+ ##############################################################################
+ # Now we have a spec. This part provides the "main" target that acts as a
+ # trampoline to call the Main.gmk with the value of $(MAKE) found in the spec
+ # file.
+ ##############################################################################
+
+ ifeq ($(LOG_NOFILE), true)
+ # Disable log wrapper if LOG=[level,]nofile was given
+ override BUILD_LOG_WRAPPER :=
+ endif
+
+ ifeq ($(OUTPUT_SYNC_SUPPORTED), true)
+ OUTPUT_SYNC_FLAG := -O$(OUTPUT_SYNC)
+ endif
+
+ $(eval $(call CheckSpecSanity))
+
+ reconfigure:
+ ifneq ($(CONFIGURE_COMMAND_LINE), )
+ $(ECHO) "Re-running configure using arguments '$(CONFIGURE_COMMAND_LINE)'"
+ else
+ $(ECHO) "Re-running configure using default settings"
+ endif
+ ( cd $(OUTPUT_ROOT) && PATH="$(ORIGINAL_PATH)" \
+ $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) )
+
+ main-init:
+ $(call RotateLogFiles)
+ $(BUILD_LOG_WRAPPER) $(PRINTF) "Building target(s) '$(strip \
+ $(INIT_TARGETS) $(SEQUENTIAL_TARGETS) $(PARALLEL_TARGETS) \
+ )' in configuration '$(CONF_NAME)'\n"
+
+
+ # MAKEOVERRIDES is automatically set and propagated by Make to sub-Make calls.
+ # We need to clear it of the init-specific variables. The user-specified
+ # variables are explicitely propagated using $(USER_MAKE_VARS).
+ main: MAKEOVERRIDES :=
+
+ main: $(INIT_TARGETS) main-init
+ ifneq ($(SEQUENTIAL_TARGETS), )
+ # Don't touch build output dir since we might be cleaning. That means
+ # no log wrapper.
+ ( cd $(TOPDIR) && \
+ $(MAKE) $(MAKE_ARGS) -j 1 -f make/Main.gmk $(USER_MAKE_VARS) \
+ $(SEQUENTIAL_TARGETS) \
+ )
+ endif
+ ifneq ($(PARALLEL_TARGETS), )
+ $(call StartGlobalTimer)
+ $(call PrepareSmartJavac)
+ ( cd $(TOPDIR) && \
+ $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) $(OUTPUT_SYNC_FLAG) \
+ -j $(JOBS) -f make/Main.gmk $(USER_MAKE_VARS) \
+ $(PARALLEL_TARGETS) \
+ )
+ $(call CleanupSmartJavac)
+ $(call StopGlobalTimer)
+ $(call ReportBuildTimes)
+ endif
+ $(BUILD_LOG_WRAPPER) $(PRINTF) "Finished building target(s) '$(strip \
+ $(INIT_TARGETS) $(SEQUENTIAL_TARGETS) $(PARALLEL_TARGETS) \
+ )' in configuration '$(CONF_NAME)'\n"
+
+ .PHONY: reconfigure main-init main
+endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/InitSupport.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -0,0 +1,328 @@
+#
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+################################################################################
+# This file contains helper functions for Init.gmk.
+# It is divided in two parts, depending on if a SPEC is present or not
+# (HAS_SPEC is true or not).
+################################################################################
+
+ifndef _INITSUPPORT_GMK
+_INITSUPPORT_GMK := 1
+
+# Setup information about available configurations, if any.
+build_dir=$(topdir)/build
+all_spec_files=$(wildcard $(build_dir)/*/spec.gmk)
+# Extract the configuration names from the path
+all_confs=$(patsubst %/spec.gmk, %, $(patsubst $(build_dir)/%, %, $(all_spec_files)))
+any_spec_file=$(firstword $(all_spec_files))
+
+ifeq ($(HAS_SPEC),)
+ ##############################################################################
+ # Helper functions for the initial part of Init.gmk, before the spec file is
+ # loaded. Most of these functions provide parsing and setting up make options
+ # from the command-line.
+ ##############################################################################
+
+ # Make control variables, handled by Init.gmk
+ INIT_CONTROL_VARIABLES := LOG CONF SPEC JOBS CONF_CHECK
+
+ # All known make control variables
+ MAKE_CONTROL_VARIABLES := $(INIT_CONTROL_VARIABLES) TEST JDK_FILTER
+
+ # Define a simple reverse function.
+ # Should maybe move to MakeBase.gmk, but we can't include that file now.
+ reverse = \
+ $(if $(strip $(1)), $(call reverse, $(wordlist 2, $(words $(1)), $(1)))) \
+ $(firstword $(1))
+
+ # The variable MAKEOVERRIDES contains variable assignments from the command
+ # line, but in reverse order to what the user entered.
+ COMMAND_LINE_VARIABLES := $(subst \#,\ , $(call reverse, $(subst \ ,\#,$(MAKEOVERRIDES))))
+
+ # A list like FOO="val1" BAR="val2" containing all user-supplied make variables
+ # that we should propagate.
+ USER_MAKE_VARS := $(filter-out $(addsuffix =%, $(INIT_CONTROL_VARIABLES)), \
+ $(MAKEOVERRIDES))
+
+ # Check for unknown command-line variables
+ define CheckControlVariables
+ command_line_variables := $$(strip $$(foreach var, \
+ $$(subst \ ,_,$$(MAKEOVERRIDES)), \
+ $$(firstword $$(subst =, , $$(var)))))
+ unknown_command_line_variables := $$(strip $$(filter-out $$(MAKE_CONTROL_VARIABLES), $$(command_line_variables)))
+ ifneq ($$(unknown_command_line_variables), )
+ $$(info Note: Command line contains non-control variables:)
+ $$(foreach var, $$(unknown_command_line_variables), $$(info * $$(var)=$$($$(var))))
+ $$(info Make sure it is not mistyped, and that you intend to override this variable.)
+ $$(info 'make help' will list known control variables.)
+ $$(info )
+ endif
+ endef
+
+ # Check for deprecated ALT_ variables
+ define CheckDeprecatedEnvironment
+ defined_alt_variables := $$(filter ALT_%, $$(.VARIABLES))
+ ifneq ($$(defined_alt_variables), )
+ $$(info Warning: You have the following ALT_ variables set:)
+ $$(foreach var, $$(defined_alt_variables), $$(info * $$(var)=$$($$(var))))
+ $$(info ALT_ variables are deprecated, and may result in a failed build.)
+ $$(info Please clean your environment.)
+ $$(info )
+ endif
+ endef
+
+ # Check for invalid make flags like -j
+ define CheckInvalidMakeFlags
+ # This is a trick to get this rule to execute before any other rules
+ # MAKEFLAGS only indicate -j if read in a recipe (!)
+ $$(topdir)/make/Init.gmk: .FORCE
+ $$(if $$(findstring --jobserver, $$(MAKEFLAGS)), \
+ $$(info Error: 'make -jN' is not supported, use 'make JOBS=N') \
+ $$(error Cannot continue) \
+ )
+ .FORCE:
+ .PHONY: .FORCE
+ endef
+
+ # Check that the CONF_CHECK option is valid and set up handling
+ define ParseConfCheckOption
+ ifeq ($$(CONF_CHECK), )
+ # Default behavior is fail
+ CONF_CHECK := fail
+ else ifneq ($$(filter-out auto fail ignore, $$(CONF_CHECK)),)
+ $$(info Error: CONF_CHECK must be one of: auto, fail or ignore.)
+ $$(error Cannot continue)
+ endif
+ endef
+
+ define ParseLogLevel
+ # Catch old-style VERBOSE= command lines.
+ ifneq ($$(origin VERBOSE), undefined)
+ $$(info Error: VERBOSE is deprecated. Use LOG=<warn|info|debug|trace> instead.)
+ $$(error Cannot continue)
+ endif
+
+ # Setup logging according to LOG
+
+ # If the "nofile" argument is given, act on it and strip it away
+ ifneq ($$(findstring nofile, $$(LOG)),)
+ LOG_NOFILE := true
+ # COMMA is defined in spec.gmk, but that is not included yet
+ COMMA := ,
+ # First try to remove ",nofile" if it exists, otherwise just remove "nofile"
+ LOG_STRIPPED := $$(subst nofile,, $$(subst $$(COMMA)nofile,, $$(LOG)))
+ # We might have ended up with a leading comma. Remove it
+ LOG_LEVEL := $$(strip $$(patsubst $$(COMMA)%, %, $$(LOG_STRIPPED)))
+ else
+ LOG_LEVEL := $$(LOG)
+ endif
+
+ ifeq ($$(LOG_LEVEL),)
+ # Set LOG to "warn" as default if not set
+ LOG_LEVEL := warn
+ endif
+
+ ifeq ($$(LOG_LEVEL), warn)
+ MAKE_LOG_FLAGS := -s
+ else ifeq ($$(LOG_LEVEL), info)
+ MAKE_LOG_FLAGS := -s
+ else ifeq ($$(LOG_LEVEL), debug)
+ MAKE_LOG_FLAGS :=
+ else ifeq ($$(LOG_LEVEL), trace)
+ MAKE_LOG_FLAGS := -d
+ else
+ $$(info Error: LOG must be one of: warn, info, debug or trace.)
+ $$(error Cannot continue)
+ endif
+ endef
+
+ define ParseConfAndSpec
+ ifneq ($$(origin SPEC), undefined)
+ # We have been given a SPEC, check that it works out properly
+ ifneq ($$(origin CONF), undefined)
+ # We also have a CONF argument. We can't have both.
+ $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)
+ $$(error Cannot continue)
+ endif
+ ifeq ($$(wildcard $$(SPEC)),)
+ $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).)
+ $$(error Cannot continue)
+ endif
+ ifeq ($$(filter /%, $$(SPEC)),)
+ # If given with relative path, make it absolute
+ SPECS := $$(CURDIR)/$$(strip $$(SPEC))
+ else
+ SPECS := $$(SPEC)
+ endif
+
+ # For now, unset this SPEC variable.
+ override SPEC :=
+ else
+ # Use spec.gmk files in the build output directory
+ ifeq ($$(any_spec_file),)
+ $$(info Error: No configurations found for $$(topdir).)
+ $$(info Please run 'bash configure' to create a configuration.)
+ $$(info )
+ $$(error Cannot continue)
+ endif
+
+ ifneq ($$(origin CONF), undefined)
+ # User have given a CONF= argument.
+ ifeq ($$(CONF),)
+ # If given CONF=, match all configurations
+ matching_confs := $$(strip $$(all_confs))
+ else
+ # Otherwise select those that contain the given CONF string
+ matching_confs := $$(strip $$(foreach var, $$(all_confs), $$(if $$(findstring $$(CONF), $$(var)), $$(var))))
+ endif
+ ifeq ($$(matching_confs),)
+ $$(info Error: No configurations found matching CONF=$$(CONF).)
+ $$(info Available configurations in $$(build_dir):)
+ $$(foreach var, $$(all_confs), $$(info * $$(var)))
+ $$(error Cannot continue)
+ else
+ ifeq ($$(words $$(matching_confs)), 1)
+ $$(info Building configuration '$$(matching_confs)' (matching CONF=$$(CONF)))
+ else
+ $$(info Building these configurations (matching CONF=$$(CONF)):)
+ $$(foreach var, $$(matching_confs), $$(info * $$(var)))
+ endif
+ endif
+
+ # Create a SPEC definition. This will contain the path to one or more spec.gmk files.
+ SPECS := $$(addsuffix /spec.gmk, $$(addprefix $$(build_dir)/, $$(matching_confs)))
+ else
+ # No CONF or SPEC given, check the available configurations
+ ifneq ($$(words $$(all_spec_files)), 1)
+ $$(info Error: No CONF given, but more than one configuration found.)
+ $$(info Available configurations in $$(build_dir):)
+ $$(foreach var, $$(all_confs), $$(info * $$(var)))
+ $$(info Please retry building with CONF=<config pattern> (or SPEC=<spec file>).)
+ $$(info )
+ $$(error Cannot continue)
+ endif
+
+ # We found exactly one configuration, use it
+ SPECS := $$(strip $$(all_spec_files))
+ endif
+ endif
+ endef
+
+ define PrintConfCheckFailed
+ @echo ' '
+ @echo "Please rerun configure! Easiest way to do this is by running"
+ @echo "'make reconfigure'."
+ @echo "This behavior may also be changed using CONF_CHECK=<ignore|auto>."
+ @echo ' '
+ endef
+
+else # $(HAS_SPEC)=true
+ ##############################################################################
+ # Helper functions for the 'main' target. These functions assume a single,
+ # proper and existing SPEC is provided, and will load it.
+ ##############################################################################
+
+ include $(SPEC)
+ include $(SRC_ROOT)/make/common/MakeBase.gmk
+
+ # Define basic logging setup
+ BUILD_LOG := $(OUTPUT_ROOT)/build.log
+ BUILD_TRACE_LOG := $(OUTPUT_ROOT)/build-trace-time.log
+
+ BUILD_LOG_WRAPPER := $(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)
+
+ # Disable the build log wrapper on sjavac+windows until
+ # we have solved how to prevent the log wrapper to wait
+ # for the background sjavac server process.
+ ifeq ($(ENABLE_SJAVAC)X$(OPENJDK_BUILD_OS),yesXwindows)
+ LOG_NOFILE := true
+ endif
+
+ # Sanity check the spec file, so it matches this source code
+ define CheckSpecSanity
+ ifneq ($$(topdir), $$(TOPDIR))
+ ifneq ($$(topdir), $$(ORIGINAL_TOPDIR))
+ ifneq ($$(topdir), $$(CANONICAL_TOPDIR))
+ $$(info Error: SPEC mismatch! Current working directory)
+ $$(info $$(topdir))
+ $$(info does not match either TOPDIR, ORIGINAL_TOPDIR or CANONICAL_TOPDIR)
+ $$(info $$(TOPDIR))
+ $$(info $$(ORIGINAL_TOPDIR))
+ $$(info $$(CANONICAL_TOPDIR))
+ $$(error Cannot continue)
+ endif
+ endif
+ endif
+ endef
+
+ define RotateLogFiles
+ $(RM) $(BUILD_LOG).old 2> /dev/null
+ $(MV) $(BUILD_LOG) $(BUILD_LOG).old 2> /dev/null || true
+ $(if $(findstring trace, $(LOG_LEVEL)), \
+ $(RM) $(BUILD_TRACE_LOG).old 2> /dev/null && \
+ $(MV) $(BUILD_TRACE_LOG) $(BUILD_TRACE_LOG).old 2> /dev/null || true \
+ )
+ endef
+
+ # Remove any javac server logs and port files. This
+ # prevents a new make run to reuse the previous servers.
+ define PrepareSmartJavac
+ $(if $(SJAVAC_SERVER_DIR), \
+ $(RM) -r $(SJAVAC_SERVER_DIR) 2> /dev/null && \
+ $(MKDIR) -p $(SJAVAC_SERVER_DIR) \
+ )
+ endef
+
+ define CleanupSmartJavac
+ [ -f $(SJAVAC_SERVER_DIR)/server.port ] && $(ECHO) Stopping sjavac server && \
+ $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true
+ endef
+
+ define StartGlobalTimer
+ $(RM) -r $(BUILDTIMESDIR) 2> /dev/null
+ $(MKDIR) -p $(BUILDTIMESDIR)
+ $(call RecordStartTime,TOTAL)
+ endef
+
+ define StopGlobalTimer
+ $(call RecordEndTime,TOTAL)
+ endef
+
+ # Find all build_time_* files and print their contents in a list sorted
+ # on the name of the sub repository.
+ define ReportBuildTimes
+ $(BUILD_LOG_WRAPPER) $(PRINTF) $(LOG_INFO) -- \
+ "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
+ "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | \
+ $(XARGS) $(CAT) | $(SORT) -k 2`" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
+ endef
+
+endif # HAS_SPEC
+
+endif # _INITSUPPORT_GMK
--- a/make/Jprt.gmk Wed Jul 05 20:26:30 2017 +0200
+++ b/make/Jprt.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -130,7 +130,4 @@
endif
@$(call TargetExit)
-
-###########################################################################
-# Phony targets
-.PHONY: jprt_bundle bundles final-images
+ALL_TARGETS += jprt_bundle bundles final-images
--- a/make/Main.gmk Wed Jul 05 20:26:30 2017 +0200
+++ b/make/Main.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -26,14 +26,19 @@
################################################################################
# This is the main makefile containing most actual top level targets. It needs
# to be called with a SPEC file defined.
+################################################################################
# Declare default target
default:
+ifeq ($(wildcard $(SPEC)),)
+ $(error Main.gmk needs SPEC set to a proper spec.gmk)
+endif
+
# Now load the spec
include $(SPEC)
-include $(SRC_ROOT)/make/MakeHelpers.gmk
+include $(SRC_ROOT)/make/MainSupport.gmk
# Load the vital tools for all the makefiles.
include $(SRC_ROOT)/make/common/MakeBase.gmk
@@ -215,7 +220,8 @@
BOOTCYCLE_TARGET := product-images
bootcycle-images:
@$(ECHO) Boot cycle build step 2: Building a new JDK image using previously built image
- +$(MAKE) $(MAKE_ARGS) -f Main.gmk SPEC=$(dir $(SPEC))bootcycle-spec.gmk $(BOOTCYCLE_TARGET)
+ +$(MAKE) $(MAKE_ARGS) -f $(SRC_ROOT)/make/Main.gmk \
+ SPEC=$(dir $(SPEC))bootcycle-spec.gmk $(BOOTCYCLE_TARGET)
zip-security:
+($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) -f ZipSecurity.gmk)
@@ -589,42 +595,29 @@
$(CLEAN_PHASE_TARGETS) $(CLEAN_MODULE_TARGETS) $(CLEAN_MODULE_PHASE_TARGETS)
################################################################################
-
-# Setup a rule for SPEC file that fails if executed. This check makes sure the
-# configuration is up to date after changes to configure.
-ifeq ($(findstring reconfigure, $(MAKECMDGOALS)), )
- $(SPEC): $(wildcard $(SRC_ROOT)/common/autoconf/*)
- @$(ECHO) "ERROR: $(SPEC) is not up to date."
- @$(ECHO) "Please rerun configure! Easiest way to do this is by running"
- @$(ECHO) "'make reconfigure'."
- @$(ECHO) "It may also be ignored by setting IGNORE_OLD_CONFIG=true"
- @if test "x$(IGNORE_OLD_CONFIG)" != "xtrue"; then exit 1; fi
-endif
-
-# The reconfigure target is automatically run serially from everything else
-# by the Makefile calling this file.
-
-reconfigure:
- ifneq ($(CONFIGURE_COMMAND_LINE), )
- @$(ECHO) "Re-running configure using arguments '$(CONFIGURE_COMMAND_LINE)'"
- else
- @$(ECHO) "Re-running configure using default settings"
- endif
- @( cd $(OUTPUT_ROOT) && PATH="$(ORIGINAL_PATH)" \
- $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) )
-
-ALL_TARGETS += reconfigure
-
-################################################################################
# Declare *-only targets for each normal target
$(foreach t, $(ALL_TARGETS), $(eval $(t)-only: $(t)))
-ALL_TARGETS += $(addsuffix -only, $(filter-out clean%, $(ALL_TARGETS)))
+ALL_TARGETS += $(addsuffix -only, $(filter-out dist-clean clean%, $(ALL_TARGETS)))
+
+################################################################################
+
+# Include JPRT targets
+include $(SRC_ROOT)/make/Jprt.gmk
+
+################################################################################
+
+print-targets:
+ @$(ECHO) $(sort $(ALL_TARGETS))
+
+print-modules:
+ @$(ECHO) $(sort $(ALL_MODULES))
+
+# print-* targets intentionally not added to ALL_TARGETS since they are internal only.
+# The corresponding external targets are in Help.gmk
################################################################################
.PHONY: $(ALL_TARGETS)
-include $(SRC_ROOT)/make/Jprt.gmk
-
FRC: # Force target
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/make/MainSupport.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -0,0 +1,186 @@
+#
+# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation. Oracle designates this
+# particular file as subject to the "Classpath" exception as provided
+# by Oracle in the LICENSE file that accompanied this code.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+# or visit www.oracle.com if you need additional information or have any
+# questions.
+#
+
+################################################################################
+# This file contains helper functions for Main.gmk.
+################################################################################
+
+ifndef _MAINSUPPORT_GMK
+_MAINSUPPORT_GMK := 1
+
+# Run the tests specified by $1.
+define RunTests
+ ($(CD) $(SRC_ROOT)/test && $(MAKE) $(MAKE_ARGS) -j1 -k MAKEFLAGS= \
+ JT_HOME=$(JT_HOME) PRODUCT_HOME=$(JDK_IMAGE_DIR) \
+ TEST_IMAGE_DIR=$(TEST_IMAGE_DIR) \
+ ALT_OUTPUTDIR=$(OUTPUT_ROOT) CONCURRENCY=$(JOBS) $1) || true
+endef
+
+# Cleans the dir given as $1
+define CleanDir
+ @$(PRINTF) "Cleaning $(strip $1) build artifacts ..."
+ @($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)
+ @$(PRINTF) " done\n"
+endef
+
+define CleanTest
+ @$(PRINTF) "Cleaning test $(strip $1) ..."
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/test/$(strip $(subst -,/,$1))
+ @$(PRINTF) " done\n"
+endef
+
+define Clean-gensrc
+ @$(PRINTF) "Cleaning gensrc $(if $1,for $(strip $1) )..."
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc_no_docs/$(strip $1)
+ @$(PRINTF) " done\n"
+endef
+
+define Clean-java
+ @$(PRINTF) "Cleaning java $(if $1,for $(strip $1) )..."
+ @$(RM) -r $(JDK_OUTPUTDIR)/modules/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/misc/$(strip $1)
+ @$(PRINTF) " done\n"
+ @$(PRINTF) "Cleaning headers $(if $1,for $(strip $1)) ..."
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/headers/$(strip $1)
+ @$(PRINTF) " done\n"
+endef
+
+define Clean-native
+ @$(PRINTF) "Cleaning native $(if $1,for $(strip $1) )..."
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/native/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs-stripped/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds/$(strip $1)
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds-stripped/$(strip $1)
+ @$(PRINTF) " done\n"
+endef
+
+define Clean-include
+ @$(PRINTF) "Cleaning include $(if $1,for $(strip $1) )..."
+ @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_include/$(strip $1)
+ @$(PRINTF) " done\n"
+endef
+
+define CleanModule
+ $(call Clean-gensrc, $1)
+ $(call Clean-java, $1)
+ $(call Clean-native, $1)
+ $(call Clean-include, $1)
+endef
+
+
+################################################################################
+
+MAKE_TOPDIR_LIST := $(JDK_TOPDIR) $(CORBA_TOPDIR) $(LANGTOOLS_TOPDIR)
+MAKE_MAKEDIR_LIST := make
+
+# Helper macro for DeclareRecipesForPhase
+# Declare a recipe for calling the module and phase specific makefile.
+# If there are multiple makefiles to call, create a rule for each topdir
+# that contains a makefile with the target $module-$suffix-$repodir,
+# (i.e: java.base-gensrc-jdk)
+# Normally there is only one makefile, and the target will just be
+# $module-$suffix
+# Param 1: Name of list to add targets to
+# Param 2: Module name
+# Param 3: Topdir
+define DeclareRecipeForModuleMakefile
+ ifeq ($$($1_MULTIPLE_MAKEFILES), true)
+ $2-$$($1_TARGET_SUFFIX): $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)
+ $1 += $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)
+
+ $2-$$($1_TARGET_SUFFIX)-$$(notdir $3):
+ else
+ $2-$$($1_TARGET_SUFFIX):
+ endif
+ $(ECHO) $(LOG_INFO) "Building $$@"
+ ifeq ($$($1_USE_WRAPPER), true)
+ +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) \
+ -f ModuleWrapper.gmk \
+ $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \
+ $$(addsuffix /$$($1_MAKE_SUBDIR), $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \
+ MODULE=$2 MAKEFILE_PREFIX=$$($1_FILE_PREFIX))
+ else
+ +($(CD) $$(dir $$(firstword $$(wildcard $$(patsubst %, \
+ $3/%/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, $(MAKE_MAKEDIR_LIST))))) \
+ && $(MAKE) $(MAKE_ARGS) \
+ -f $$($1_FILE_PREFIX)-$2.gmk \
+ $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \
+ $$(addsuffix /$$($1_MAKE_SUBDIR), $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \
+ MODULE=$2)
+ endif
+
+endef
+
+# Helper macro for DeclareRecipesForPhase
+# Param 1: Name of list to add targets to
+# Param 2: Module name
+define DeclareRecipesForPhaseAndModule
+ $1_$2_TOPDIRS := $$(strip $$(sort $$(foreach d, $(MAKE_TOPDIR_LIST), \
+ $$(patsubst $$d/%, $$d, $$(filter $$d/%, \
+ $$(wildcard $$(patsubst %, %/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, \
+ $$(foreach s, $(MAKE_MAKEDIR_LIST), \
+ $$(addsuffix /$$s, $(MAKE_TOPDIR_LIST))))))))))
+
+ # Only declare recipes if there are makefiles to call
+ ifneq ($$($1_$2_TOPDIRS), )
+ ifeq ($(NO_RECIPES),)
+ $$(foreach d, $$($1_$2_TOPDIRS), \
+ $$(eval $$(call DeclareRecipeForModuleMakefile,$1,$2,$$d)))
+ endif
+ $1 += $2-$$($1_TARGET_SUFFIX)
+ $1_MODULES += $2
+ endif
+endef
+
+# Declare recipes for a specific module and build phase if there are makefiles
+# present for the specific combination.
+# Param 1: Name of list to add targets to
+# Named params:
+# TARGET_SUFFIX : Suffix of target to create for recipe
+# MAKE_SUBDIR : Subdir for this build phase
+# FILE_PREFIX : File prefix for this build phase
+# USE_WRAPPER : Set to true to use ModuleWrapper.gmk
+# CHECK_MODULES : List of modules to try
+# MULTIPLE_MAKEFILES : Set to true to handle makefils for the same module in
+# phase in multiple repos
+# Exported variables:
+# $1_MODULES : All modules that had rules generated
+# $1_TARGETS : All targets generated
+define DeclareRecipesForPhase
+ $(foreach i,2 3 4 5 6 7, $(if $($i),$(strip $1)_$(strip $($i)))$(NEWLINE))
+ $(if $(8),$(error Internal makefile error: Too many arguments to \
+ DeclareRecipesForPhase, please update MakeHelper.gmk))
+
+ $$(foreach m, $$($(strip $1)_CHECK_MODULES), \
+ $$(eval $$(call DeclareRecipesForPhaseAndModule,$(strip $1),$$m)))
+
+ $(strip $1)_TARGETS := $$($(strip $1))
+endef
+
+################################################################################
+
+endif # _MAINSUPPORT_GMK
--- a/make/MakeHelpers.gmk Wed Jul 05 20:26:30 2017 +0200
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,451 +0,0 @@
-#
-# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation. Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-################################################################
-#
-# This file contains helper functions for the top-level Makefile that does
-# not depend on the spec.gmk file having been read. (The purpose of this
-# file is ju to avoid cluttering the top-level Makefile.)
-#
-################################################################
-
-ifndef _MAKEHELPERS_GMK
-_MAKEHELPERS_GMK := 1
-
-##############################
-# Stuff to run at include time
-##############################
-
-# Find out which variables were passed explicitely on the make command line. These
-# will be passed on to sub-makes, overriding spec.gmk settings.
-MAKE_ARGS=$(foreach var,$(subst =command,,$(filter %=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var)))))),$(var)="$($(var))")
-
-list_alt_overrides_with_origins=$(filter ALT_%=environment ALT_%=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var)))))
-list_alt_overrides=$(subst =command,,$(subst =environment,,$(list_alt_overrides_with_origins)))
-
-# Store the build times in this directory.
-BUILDTIMESDIR=$(OUTPUT_ROOT)/make-support/build-times
-
-# Global targets are possible to run either with or without a SPEC. The prototypical
-# global target is "help".
-global_targets=help
-
-##############################
-# Functions
-##############################
-
-define CheckEnvironment
- # Find all environment or command line variables that begin with ALT.
- $(if $(list_alt_overrides),
- @$(PRINTF) "\nWARNING: You have the following ALT_ variables set:\n"
- @$(PRINTF) "$(foreach var,$(list_alt_overrides),$(var)=$$$(var))\n"
- @$(PRINTF) "ALT_ variables are deprecated and will be ignored. Please clean your environment.\n\n"
- )
-endef
-
-### Functions for timers
-
-# Record starting time for build of a sub repository.
-define RecordStartTime
- $(MKDIR) -p $(BUILDTIMESDIR)
- $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1
- $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable
-endef
-
-# Record ending time and calculate the difference and store it in a
-# easy to read format. Handles builds that cross midnight. Expects
-# that a build will never take 24 hours or more.
-define RecordEndTime
- $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1
- $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable
- $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \
- $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
- M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
- > $(BUILDTIMESDIR)/build_time_diff_$1
-endef
-
-# Find all build_time_* files and print their contents in a list sorted
-# on the name of the sub repository.
-define ReportBuildTimes
- $(BUILD_LOG_WRAPPER) $(PRINTF) -- "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
- "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
-endef
-
-define ResetAllTimers
- $$(shell $(MKDIR) -p $(BUILDTIMESDIR) && $(RM) $(BUILDTIMESDIR)/build_time_*)
-endef
-
-define StartGlobalTimer
- $(call RecordStartTime,TOTAL)
-endef
-
-define StopGlobalTimer
- $(call RecordEndTime,TOTAL)
-endef
-
-### Functions for managing makefile structure (start/end of makefile and individual targets)
-
-# Do not indent this function, this will add whitespace at the start which the caller won't handle
-define GetRealTarget
-$(strip $(if $(findstring main-wrapper, $(MAKECMDGOALS)), $(MAIN_TARGETS), \
- $(if $(MAKECMDGOALS),$(MAKECMDGOALS),default)))
-endef
-
-# Do not indent this function, this will add whitespace at the start which the caller won't handle
-define LastGoal
-$(strip $(lastword $(call GetRealTarget)))
-endef
-
-# Check if the current target is the final target, as specified by
-# the user on the command line. If so, call AtRootMakeEnd.
-define CheckIfMakeAtEnd
- # Check if the current target is the last goal
- $(if $(filter $@,$(call LastGoal)),$(call AtMakeEnd))
- # If the target is 'foo-only', check if our goal was stated as 'foo'
- $(if $(filter $@,$(call LastGoal)-only),$(call AtMakeEnd))
-endef
-
-# Hook to be called when starting to execute a top-level target
-define TargetEnter
- $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"
- $(call RecordStartTime,$(patsubst %-only,%,$@))
-endef
-
-# Hook to be called when finish executing a top-level target
-define TargetExit
- $(call RecordEndTime,$(patsubst %-only,%,$@))
- $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"
-endef
-
-# Hook to be called as the very first thing when running a normal build
-define AtMakeStart
- $(if $(findstring --jobserver,$(MAKEFLAGS)),$(error make -j is not supported, use make JOBS=n))
- $(call CheckEnvironment)
- $(BUILD_LOG_WRAPPER) $(PRINTF) $(LOG_INFO) "Running make as '$(MAKE) $(MFLAGS) $(MAKE_ARGS)'\n"
- $(BUILD_LOG_WRAPPER) $(PRINTF) "Building $(PRODUCT_NAME) for target '$(call GetRealTarget)' in configuration '$(CONF_NAME)'\n\n"
- $(call StartGlobalTimer)
-endef
-
-# Hook to be called as the very last thing for targets that are "top level" targets
-define AtMakeEnd
- [ -f $(SJAVAC_SERVER_DIR)/server.port ] && echo Stopping sjavac server && $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true
- $(call StopGlobalTimer)
- $(call ReportBuildTimes)
- @$(PRINTF) "\nFinished building $(PRODUCT_NAME) for target '$(call GetRealTarget)'\n"
- $(call CheckEnvironment)
-endef
-
-### Functions for parsing and setting up make options from command-line
-
-define FatalError
- # If the user specificed a "global" target (e.g. 'help'), do not exit but continue running
- $$(if $$(filter-out $(global_targets),$$(call GetRealTarget)),$$(error Cannot continue))
-endef
-
-define ParseLogLevel
- ifeq ($$(origin VERBOSE),undefined)
- # Setup logging according to LOG (but only if VERBOSE is not given)
-
- # If the "nofile" argument is given, act on it and strip it away
- ifneq ($$(findstring nofile,$$(LOG)),)
- # Reset the build log wrapper, regardless of other values
- override BUILD_LOG_WRAPPER=
- # COMMA is defined in spec.gmk, but that is not included yet
- COMMA=,
- # First try to remove ",nofile" if it exists
- LOG_STRIPPED1=$$(subst $$(COMMA)nofile,,$$(LOG))
- # Otherwise just remove "nofile"
- LOG_STRIPPED2=$$(subst nofile,,$$(LOG_STRIPPED1))
- # We might have ended up with a leading comma. Remove it
- LOG_STRIPPED3=$$(strip $$(patsubst $$(COMMA)%,%,$$(LOG_STRIPPED2)))
- LOG_LEVEL:=$$(LOG_STRIPPED3)
- else
- LOG_LEVEL:=$$(LOG)
- endif
-
- ifeq ($$(LOG_LEVEL),)
- # Set LOG to "warn" as default if not set (and no VERBOSE given)
- override LOG_LEVEL=warn
- endif
- ifeq ($$(LOG_LEVEL),warn)
- VERBOSE=-s
- else ifeq ($$(LOG_LEVEL),info)
- VERBOSE=-s
- else ifeq ($$(LOG_LEVEL),debug)
- VERBOSE=
- else ifeq ($$(LOG_LEVEL),trace)
- VERBOSE=
- else
- $$(info Error: LOG must be one of: warn, info, debug or trace.)
- $$(eval $$(call FatalError))
- endif
- else
- # Provide resonable interpretations of LOG_LEVEL if VERBOSE is given.
- ifeq ($(VERBOSE),)
- LOG_LEVEL:=debug
- else
- LOG_LEVEL:=warn
- endif
- ifneq ($$(LOG),)
- # We have both a VERBOSE and a LOG argument. This is OK only if this is a repeated call by ourselves,
- # but complain if this is the top-level make call.
- ifeq ($$(MAKELEVEL),0)
- $$(info Cannot use LOG=$$(LOG) and VERBOSE=$$(VERBOSE) at the same time. Choose one.)
- $$(eval $$(call FatalError))
- endif
- endif
- endif
-endef
-
-define ParseConfAndSpec
- ifneq ($$(filter-out $(global_targets),$$(call GetRealTarget)),)
- # If we only have global targets, no need to bother with SPEC or CONF
- ifneq ($$(origin SPEC),undefined)
- # We have been given a SPEC, check that it works out properly
- ifneq ($$(origin CONF),undefined)
- # We also have a CONF argument. This is OK only if this is a repeated call by ourselves,
- # but complain if this is the top-level make call.
- ifeq ($$(MAKELEVEL),0)
- $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)
- $$(eval $$(call FatalError))
- endif
- endif
- ifeq ($$(wildcard $$(SPEC)),)
- $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).)
- $$(eval $$(call FatalError))
- endif
- # ... OK, we're satisfied, we'll use this SPEC later on
- else
- # Find all spec.gmk files in the build output directory
- output_dir=$$(root_dir)/build
- all_spec_files=$$(wildcard $$(output_dir)/*/spec.gmk)
- ifeq ($$(all_spec_files),)
- $$(info Error: No configurations found for $$(root_dir).)
- $$(info Please run 'bash configure' to create a configuration.)
- $$(eval $$(call FatalError))
- endif
- # Extract the configuration names from the path
- all_confs=$$(patsubst %/spec.gmk,%,$$(patsubst $$(output_dir)/%,%,$$(all_spec_files)))
-
- ifneq ($$(origin CONF),undefined)
- # User have given a CONF= argument.
- ifeq ($$(CONF),)
- # If given CONF=, match all configurations
- matching_confs=$$(strip $$(all_confs))
- else
- # Otherwise select those that contain the given CONF string
- matching_confs=$$(strip $$(foreach var,$$(all_confs),$$(if $$(findstring $$(CONF),$$(var)),$$(var))))
- endif
- ifeq ($$(matching_confs),)
- $$(info Error: No configurations found matching CONF=$$(CONF).)
- $$(info Available configurations in $$(output_dir):)
- $$(foreach var,$$(all_confs),$$(info * $$(var)))
- $$(eval $$(call FatalError))
- else
- ifeq ($$(words $$(matching_confs)),1)
- $$(info Building '$$(matching_confs)' (matching CONF=$$(CONF)))
- else
- $$(info Building target '$(call GetRealTarget)' in these configurations (matching CONF=$$(CONF)):)
- $$(foreach var,$$(matching_confs),$$(info * $$(var)))
- endif
- endif
-
- # Create a SPEC definition. This will contain the path to one or more spec.gmk files.
- SPEC=$$(addsuffix /spec.gmk,$$(addprefix $$(output_dir)/,$$(matching_confs)))
- else
- # No CONF or SPEC given, check the available configurations
- ifneq ($$(words $$(all_spec_files)),1)
- $$(info Error: No CONF given, but more than one configuration found.)
- $$(info Available configurations in $$(output_dir):)
- $$(foreach var,$$(all_confs),$$(info * $$(var)))
- $$(info Please retry building with CONF=<config pattern> (or SPEC=<specfile>).)
- $$(eval $$(call FatalError))
- endif
-
- # We found exactly one configuration, use it
- SPEC=$$(strip $$(all_spec_files))
- endif
- endif
- endif
-endef
-
-### Convenience functions from Main.gmk
-
-# Run the tests specified by $1.
-define RunTests
- ($(CD) $(SRC_ROOT)/test && $(MAKE) $(MAKE_ARGS) -j1 -k MAKEFLAGS= \
- JT_HOME=$(JT_HOME) PRODUCT_HOME=$(JDK_IMAGE_DIR) \
- TEST_IMAGE_DIR=$(TEST_IMAGE_DIR) \
- ALT_OUTPUTDIR=$(OUTPUT_ROOT) CONCURRENCY=$(JOBS) $1) || true
-endef
-
-# Cleans the dir given as $1
-define CleanDir
- @$(PRINTF) "Cleaning $(strip $1) build artifacts ..."
- @($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)
- @$(PRINTF) " done\n"
-endef
-
-define CleanTest
- @$(PRINTF) "Cleaning test $(strip $1) ..."
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/test/$(strip $(subst -,/,$1))
- @$(PRINTF) " done\n"
-endef
-
-define Clean-gensrc
- @$(PRINTF) "Cleaning gensrc $(if $1,for $(strip $1) )..."
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc_no_docs/$(strip $1)
- @$(PRINTF) " done\n"
-endef
-
-define Clean-java
- @$(PRINTF) "Cleaning java $(if $1,for $(strip $1) )..."
- @$(RM) -r $(JDK_OUTPUTDIR)/modules/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/misc/$(strip $1)
- @$(PRINTF) " done\n"
- @$(PRINTF) "Cleaning headers $(if $1,for $(strip $1)) ..."
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/headers/$(strip $1)
- @$(PRINTF) " done\n"
-endef
-
-define Clean-native
- @$(PRINTF) "Cleaning native $(if $1,for $(strip $1) )..."
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/native/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs-stripped/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds/$(strip $1)
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds-stripped/$(strip $1)
- @$(PRINTF) " done\n"
-endef
-
-define Clean-include
- @$(PRINTF) "Cleaning include $(if $1,for $(strip $1) )..."
- @$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_include/$(strip $1)
- @$(PRINTF) " done\n"
-endef
-
-define CleanModule
- $(call Clean-gensrc, $1)
- $(call Clean-java, $1)
- $(call Clean-native, $1)
- $(call Clean-include, $1)
-endef
-
-
-################################################################################
-
-MAKE_TOPDIR_LIST := $(JDK_TOPDIR) $(CORBA_TOPDIR) $(LANGTOOLS_TOPDIR)
-MAKE_MAKEDIR_LIST := make
-
-# Helper macro for DeclareRecipesForPhase
-# Declare a recipe for calling the module and phase specific makefile.
-# If there are multiple makefiles to call, create a rule for each topdir
-# that contains a makefile with the target $module-$suffix-$repodir,
-# (i.e: java.base-gensrc-jdk)
-# Normally there is only one makefile, and the target will just be
-# $module-$suffix
-# Param 1: Name of list to add targets to
-# Param 2: Module name
-# Param 3: Topdir
-define DeclareRecipeForModuleMakefile
- ifeq ($$($1_MULTIPLE_MAKEFILES), true)
- $2-$$($1_TARGET_SUFFIX): $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)
- $1 += $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)
-
- $2-$$($1_TARGET_SUFFIX)-$$(notdir $3):
- else
- $2-$$($1_TARGET_SUFFIX):
- endif
- $(ECHO) $(LOG_INFO) "Building $$@"
- ifeq ($$($1_USE_WRAPPER), true)
- +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) \
- -f ModuleWrapper.gmk \
- $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \
- $$(addsuffix /$$($1_MAKE_SUBDIR), $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \
- MODULE=$2 MAKEFILE_PREFIX=$$($1_FILE_PREFIX))
- else
- +($(CD) $$(dir $$(firstword $$(wildcard $$(patsubst %, \
- $3/%/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, $(MAKE_MAKEDIR_LIST))))) \
- && $(MAKE) $(MAKE_ARGS) \
- -f $$($1_FILE_PREFIX)-$2.gmk \
- $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \
- $$(addsuffix /$$($1_MAKE_SUBDIR), $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \
- MODULE=$2)
- endif
-
-endef
-
-# Helper macro for DeclareRecipesForPhase
-# Param 1: Name of list to add targets to
-# Param 2: Module name
-define DeclareRecipesForPhaseAndModule
- $1_$2_TOPDIRS := $$(strip $$(sort $$(foreach d, $(MAKE_TOPDIR_LIST), \
- $$(patsubst $$d/%, $$d, $$(filter $$d/%, \
- $$(wildcard $$(patsubst %, %/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, \
- $$(foreach s, $(MAKE_MAKEDIR_LIST), \
- $$(addsuffix /$$s, $(MAKE_TOPDIR_LIST))))))))))
-
- # Only declare recipes if there are makefiles to call
- ifneq ($$($1_$2_TOPDIRS), )
- $$(foreach d, $$($1_$2_TOPDIRS), \
- $$(eval $$(call DeclareRecipeForModuleMakefile,$1,$2,$$d)))
- $1 += $2-$$($1_TARGET_SUFFIX)
- $1_MODULES += $2
- endif
-endef
-
-# Declare recipes for a specific module and build phase if there are makefiles
-# present for the specific combination.
-# Param 1: Name of list to add targets to
-# Named params:
-# TARGET_SUFFIX : Suffix of target to create for recipe
-# MAKE_SUBDIR : Subdir for this build phase
-# FILE_PREFIX : File prefix for this build phase
-# USE_WRAPPER : Set to true to use ModuleWrapper.gmk
-# CHECK_MODULES : List of modules to try
-# MULTIPLE_MAKEFILES : Set to true to handle makefils for the same module in
-# phase in multiple repos
-# Exported variables:
-# $1_MODULES : All modules that had rules generated
-# $1_TARGETS : All targets generated
-define DeclareRecipesForPhase
- $(foreach i,2 3 4 5 6 7, $(if $($i),$(strip $1)_$(strip $($i)))$(NEWLINE))
- $(if $(8),$(error Internal makefile error: Too many arguments to \
- DeclareRecipesForPhase, please update MakeHelper.gmk))
-
- $$(foreach m, $$($(strip $1)_CHECK_MODULES), \
- $$(eval $$(call DeclareRecipesForPhaseAndModule,$(strip $1),$$m)))
-
- $(strip $1)_TARGETS := $$($(strip $1))
-endef
-
-################################################################################
-
-endif # _MAKEHELPERS_GMK
--- a/make/common/MakeBase.gmk Wed Jul 05 20:26:30 2017 +0200
+++ b/make/common/MakeBase.gmk Fri Apr 03 16:33:01 2015 -0700
@@ -32,6 +32,53 @@
ifndef _MAKEBASE_GMK
_MAKEBASE_GMK := 1
+ifeq ($(wildcard $(SPEC)),)
+ $(error MakeBase.gmk needs SPEC set to a proper spec.gmk)
+endif
+
+
+##############################
+# Functions
+##############################
+
+
+### Functions for timers
+
+# Store the build times in this directory.
+BUILDTIMESDIR=$(OUTPUT_ROOT)/make-support/build-times
+
+# Record starting time for build of a sub repository.
+define RecordStartTime
+ $(MKDIR) -p $(BUILDTIMESDIR)
+ $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)
+ $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$(strip $1)_human_readable
+endef
+
+# Record ending time and calculate the difference and store it in a
+# easy to read format. Handles builds that cross midnight. Expects
+# that a build will never take 24 hours or more.
+define RecordEndTime
+ $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)
+ $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$(strip $1)_human_readable
+ $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$(strip $1)` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$(strip $1)` $1 | \
+ $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
+ M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
+ > $(BUILDTIMESDIR)/build_time_diff_$(strip $1)
+endef
+
+# Hook to be called when starting to execute a top-level target
+define TargetEnter
+ $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"
+ $(call RecordStartTime,$(patsubst %-only,%,$@))
+endef
+
+# Hook to be called when finish executing a top-level target
+define TargetExit
+ $(call RecordEndTime,$(patsubst %-only,%,$@))
+ $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"
+endef
+
################################################################################
# This macro translates $ into \$ to protect the $ from expansion in the shell.
# To make this macro resilient against already escaped strings, first remove
@@ -341,7 +388,7 @@
endef
define SetupLogging
- ifeq ($$(LOG_LEVEL),trace)
+ ifeq ($$(LOG_LEVEL), trace)
# Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
# For each target executed, will print
# Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
@@ -349,25 +396,25 @@
# (and causing a crash on Cygwin).
# Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
# Only use time if it's GNU time which supports format and output file.
- WRAPPER_SHELL:=$$(BASH) $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log $$(SHELL)
- SHELL=$$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
+ WRAPPER_SHELL := $$(BASH) $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log $$(SHELL)
+ SHELL := $$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
endif
# Never remove warning messages; this is just for completeness
- LOG_WARN=
- ifneq ($$(findstring $$(LOG_LEVEL),info debug trace),)
- LOG_INFO=
+ LOG_WARN :=
+ ifneq ($$(findstring $$(LOG_LEVEL), info debug trace),)
+ LOG_INFO :=
else
- LOG_INFO=> /dev/null
+ LOG_INFO := > /dev/null
endif
- ifneq ($$(findstring $$(LOG_LEVEL),debug trace),)
- LOG_DEBUG=
+ ifneq ($$(findstring $$(LOG_LEVEL), debug trace),)
+ LOG_DEBUG :=
else
- LOG_DEBUG=> /dev/null
+ LOG_DEBUG := > /dev/null
endif
- ifneq ($$(findstring $$(LOG_LEVEL),trace),)
- LOG_TRACE=
+ ifneq ($$(findstring $$(LOG_LEVEL), trace),)
+ LOG_TRACE :=
else
- LOG_TRACE=> /dev/null
+ LOG_TRACE := > /dev/null
endif
endef
--- a/test/lib/sun/hotspot/WhiteBox.java Wed Jul 05 20:26:30 2017 +0200
+++ b/test/lib/sun/hotspot/WhiteBox.java Fri Apr 03 16:33:01 2015 -0700
@@ -24,6 +24,7 @@
package sun.hotspot;
+import java.lang.management.MemoryUsage;
import java.lang.reflect.Executable;
import java.util.Arrays;
import java.util.List;
@@ -95,8 +96,10 @@
// G1
public native boolean g1InConcurrentMark();
public native boolean g1IsHumongous(Object o);
+ public native long g1NumMaxRegions();
public native long g1NumFreeRegions();
public native int g1RegionSize();
+ public native MemoryUsage g1AuxiliaryMemoryUsage();
public native Object[] parseCommandLine(String commandline, char delim, DiagnosticCommand[] args);
// NMT