#
# Copyright (c) 2007, 2011, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
#
# Makefile for building sunjce_provider.jar.
#
# This file was derived from make/javax/crypto/Makefile.
#
#
# (The terms "OpenJDK" and "JDK" below refer to OpenJDK and Sun JDK builds
# respectively.)
#
# JCE builds are very different between OpenJDK and JDK. The OpenJDK JCE
# jar files do not require signing, but those for JDK do. If an unsigned
# jar file is installed into JDK, things will break when the crypto
# routines are called.
#
# This Makefile does the "real" build of the JCE files. There are some
# javac options currently specific to JCE, so we recompile now to make
# sure any implicit compilations didn't use any incorrect flags.
#
# For OpenJDK, the jar files built here are installed directly into the
# OpenJDK.
#
# For JDK, the binaries use pre-built/pre-signed binary files stored in
# the closed workspace that are not shipped in the OpenJDK workspaces.
# We still build the JDK files here to verify the files compile, and in
# preparation for possible signing. Developers working on JCE in JDK
# must sign the JCE files before testing. The JCE signing key is kept
# separate from the JDK workspace to prevent its disclosure.
#
# SPECIAL NOTE TO JCE/JDK developers: The source files must eventually
# be built and signed, and the resulting jar files MUST BE CHECKED INTO
# THE CLOSED PART OF THE WORKSPACE*. This separate step *MUST NOT BE
# FORGOTTEN*, otherwise a bug fixed in the source code will not be
# reflected in the shipped binaries. The "release" target should be
# used to generate the required files.
#
# There are a number of targets to help both JDK/OpenJDK developers.
#
# Main Targets (JDK/OPENJDK):
#
# all/clobber/clean The usual.
# If OpenJDK, installs sunjce_provider.jar.
# If JDK, installs prebuilt
# sunjce_provider.jar.
#
# jar Builds/installs sunjce_provider.jar
# If OpenJDK, does not sign.
# If JDK, tries to sign.
#
# Other lesser-used Targets (JDK/OPENJDK):
#
# build-jar Builds sunjce_provider.jar
# (does not sign/install)
#
# install-jar Alias for "jar" above.
#
# Other targets (JDK only):
#
# sign Alias for sign-jar
# sign-jar Builds/signs sunjce_provider.jar (no install)
#
# release Builds all targets in preparation
# for workspace integration.
#
# install-prebuilt Installs the pre-built jar files
#
# This makefile was written to support parallel target execution.
#
BUILDDIR = ../../../..
PACKAGE = com.sun.crypto.provider
PRODUCT = sun
#
# The following is for when we need to do postprocessing
# (signing) against a read-only build. If the OUTPUTDIR
# isn't writable, the build currently crashes out.
#
ifndef OPENJDK
ifdef ALT_JCE_BUILD_DIR
# =====================================================
# Where to place the output, in case we're building from a read-only
# build area. (e.g. a release engineering build.)
JCE_BUILD_DIR=${ALT_JCE_BUILD_DIR}
IGNORE_WRITABLE_OUTPUTDIR_TEST=true
else
JCE_BUILD_DIR=${TEMPDIR}
endif
endif
JAVAC_MAX_WARNINGS = false
JAVAC_LINT_OPTIONS = -Xlint:all,-deprecation
JAVAC_WARNINGS_FATAL = true
include $(BUILDDIR)/common/Defs.gmk
#
# Location for the newly built classfiles.
#
CLASSDESTDIR = $(TEMPDIR)/classes
#
# Subdirectories of these are automatically included.
#
AUTO_FILES_JAVA_DIRS = \
com/sun/crypto/provider
include $(BUILDDIR)/common/Classes.gmk
#
# Rules
#
#
# Some licensees do not get the security sources, but we still need to
# be able to build "all" for them. Check here to see if the sources were
# available. If not, then we don't need to continue this rule.
#
ifdef OPENJDK
all: build-jar install-jar
else # OPENJDK
ifeq ($(strip $(FILES_java)),)
all: install-prebuilt
$(no-source-warning)
else # FILES_java available
all: build-jar install-prebuilt
$(build-warning)
endif # $(FILES_java) available
endif # OPENJDK
#
# We use a variety of subdirectories in the $(TEMPDIR) depending on what
# part of the build we're doing. Both OPENJDK/JDK builds are initially
# done in the unsigned area. When files are signed in JDK, they will be
# placed in the appropriate areas.
#
UNSIGNED_DIR = $(TEMPDIR)/unsigned
include $(BUILDDIR)/javax/crypto/Defs-jce.gmk
# =====================================================
# Build the unsigned sunjce_provider.jar file.
#
JAR_DESTFILE = $(EXTDIR)/sunjce_provider.jar
#
# The sunjce_provider.jar needs to be in the extension class directory,
# therefore none of its classes should appear in $(CLASSBINDIR).
# Currently no one is using any of the SunJCE internals, so these files
# should not have been built.
#
#
# Since the -C option to jar is used below, each directory entry must be
# preceded with the appropriate directory to "cd" into.
#
JAR_DIRS = $(patsubst %, -C $(CLASSDESTDIR) %, $(AUTO_FILES_JAVA_DIRS))
build-jar: $(UNSIGNED_DIR)/sunjce_provider.jar
#
# Build sunjce_provider.jar.
#
$(UNSIGNED_DIR)/sunjce_provider.jar: build $(JCE_MANIFEST_FILE)
$(prep-target)
$(BOOT_JAR_CMD) cmf $(JCE_MANIFEST_FILE) $@ $(JAR_DIRS) \
$(BOOT_JAR_JFLAGS)
@$(java-vm-cleanup)
ifndef OPENJDK
# =====================================================
# Sign the provider jar file. Not needed for OpenJDK.
#
SIGNED_DIR = $(JCE_BUILD_DIR)/signed
sign: sign-jar
sign-jar: $(SIGNED_DIR)/sunjce_provider.jar
ifndef ALT_JCE_BUILD_DIR
$(SIGNED_DIR)/sunjce_provider.jar: $(UNSIGNED_DIR)/sunjce_provider.jar
else
#
# We have to remove the build dependency, otherwise, we'll try to rebuild it
# which we can't do on a read-only filesystem.
#
$(SIGNED_DIR)/sunjce_provider.jar:
@if [ ! -r $(UNSIGNED_DIR)/sunjce_provider.jar ] ; then \
$(ECHO) "Couldn't find $(UNSIGNED_DIR)/sunjce_provider.jar"; \
exit 1; \
fi
endif
$(call sign-file, $(UNSIGNED_DIR)/sunjce_provider.jar)
# =====================================================
# Create the Release Engineering files. Signed builds, etc.
#
release: $(SIGNED_DIR)/sunjce_provider.jar
$(RM) $(JCE_BUILD_DIR)/release/sunjce_provider.jar
$(MKDIR) -p $(JCE_BUILD_DIR)/release
$(CP) $(SIGNED_DIR)/sunjce_provider.jar $(JCE_BUILD_DIR)/release
$(release-warning)
endif # OPENJDK
# =====================================================
# Install routines.
#
#
# Install sunjce_provider.jar, depending on which type is requested.
#
install-jar jar: $(JAR_DESTFILE)
ifndef OPENJDK
$(release-warning)
endif
ifdef OPENJDK
$(JAR_DESTFILE): $(UNSIGNED_DIR)/sunjce_provider.jar
else
$(JAR_DESTFILE): $(SIGNED_DIR)/sunjce_provider.jar
endif
$(install-file)
ifndef OPENJDK
install-prebuilt:
@$(ECHO) "\n>>>Installing prebuilt SunJCE provider..."
$(RM) $(JAR_DESTFILE)
$(CP) $(PREBUILT_DIR)/jce/sunjce_provider.jar $(JAR_DESTFILE)
endif
# =====================================================
# Support routines.
#
clobber clean::
$(RM) -r $(JAR_DESTFILE) $(TEMPDIR) $(JCE_BUILD_DIR)
.PHONY: build-jar jar install-jar
ifndef OPENJDK
.PHONY: sign sign-jar release install-prebuilt
endif