#
# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
### This is the main part of the Makefile, for the normal case with SPEC specifying a single existing spec.gmk file.
# Now load the spec
include $(SPEC)
# Load the vital tools for all the makefiles.
include $(SRC_ROOT)/common/makefiles/MakeBase.gmk
# Include the corresponding custom file, if present.
-include $(CUSTOM_MAKE_DIR)/Main.gmk
### Clean up from previous run
# Remove any build.log from a previous run, if they exist
ifneq (,$(BUILD_LOG))
ifneq (,$(BUILD_LOG_PREVIOUS))
# Rotate old log
$(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
$(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
else
$(shell $(RM) $(BUILD_LOG) 2> /dev/null)
endif
$(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
endif
# Remove any javac server logs and port files. This
# prevents a new make run to reuse the previous servers.
ifneq (,$(SJAVAC_SERVER_DIR))
$(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
endif
# Reset the build timers.
$(eval $(call ResetAllTimers))
# Setup number of jobs to use. -jN is unfortunately not available for us to parse from the command line,
# hence this workaround.
ifeq ($(JOBS),)
JOBS=$(NUM_CORES)
endif
MAKE_ARGS:=$(MAKE_ARGS) -j$(JOBS)
### Main targets
all: jdk
start-make:
@$(call AtMakeStart)
langtools: langtools-only
langtools-only: start-make
@$(call TargetEnter)
@($(CD) $(LANGTOOLS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildLangtools.gmk)
@$(call TargetExit)
corba: langtools corba-only
corba-only: start-make
@$(call TargetEnter)
@($(CD) $(CORBA_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildCorba.gmk)
@$(call TargetExit)
jaxp: langtools jaxp-only
jaxp-only: start-make
@$(call TargetEnter)
@($(CD) $(JAXP_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJaxp.gmk)
@$(call TargetExit)
jaxws: langtools jaxp jaxws-only
jaxws-only: start-make
@$(call TargetEnter)
@($(CD) $(JAXWS_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJaxws.gmk)
@$(call TargetExit)
hotspot: hotspot-only
hotspot-only: start-make
@$(call TargetEnter)
@($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
@$(call TargetExit)
jdk: langtools hotspot corba jaxp jaxws jdk-only
jdk-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk $(JDK_TARGET))
@$(call TargetExit)
demos: jdk demos-only
demos-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk demos)
@$(call TargetExit)
images: source-tips demos images-only
images-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk images)
@$(call TargetExit)
overlay-images: source-tips demos overlay-images-only
overlay-images-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk overlay-images)
@$(call TargetExit)
bundles: images bundles-only
bundles-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk bundles)
@$(call TargetExit)
install: images install-only
install-only: start-make
@$(call TargetEnter)
@($(CD) $(JDK_TOPDIR)/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f BuildJdk.gmk install)
@$(call TargetExit)
docs: jdk docs-only
docs-only: start-make
@$(call TargetEnter)
@($(CD) $(SRC_ROOT)/common/makefiles/javadoc && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f Javadoc.gmk docs)
@$(call TargetExit)
bootcycle-images:
@$(ECHO) Boot cycle build step 1: Building the JDK image normally
@($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(SPEC) images)
@$(ECHO) Boot cycle build step 2: Building a new JDK image using previously built image
@($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) SPEC=$(dir $(SPEC))bootcycle-spec.gmk images)
test: start-make
@$(call TargetEnter)
@($(CD) $(SRC_ROOT)/test && $(BUILD_LOG_WRAPPER) $(MAKE) MAKEFLAGS= -j1 PRODUCT_HOME=$(OUTPUT_ROOT)/jdk JPRT_JAVA_HOME=$(OUTPUT_ROOT)/jdk ALT_OUTPUTDIR=$(OUTPUT_ROOT) $(TEST)) || true
@$(call TargetExit)
# Stores the tips for each repository. This file is be used when constructing the jdk image and can be
# used to track the exact sources used to build that image.
source-tips: $(OUTPUT_ROOT)/source_tips
$(OUTPUT_ROOT)/source_tips: FRC
@$(MKDIR) -p $(@D)
@$(RM) $@
@$(if $(HG),$(call GetSourceTips),$(ECHO) "hg not installed" > $@)
# Remove everything, except the output from configure.
clean: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images clean-overlay-images clean-bootcycle-build
@($(CD) $(OUTPUT_ROOT) && $(RM) -r tmp source_tips build.log* build-trace*.log*)
@$(ECHO) Cleaned all build artifacts.
# Remove everything, including configure configuration.
# If the output directory was created by configure and now becomes empty, remove it as well.
# FIXME: tmp should not be here, fix ResetTimers instead. And remove spec.sh!
dist-clean: clean
@($(CD) $(OUTPUT_ROOT) && $(RM) -r *spec.gmk config.* configure-arguments Makefile compare.sh spec.sh tmp)
@$(if $(filter $(CONF_NAME),$(notdir $(OUTPUT_ROOT))), \
if test "x`$(LS) $(OUTPUT_ROOT)`" != x; then \
$(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ;\
else \
($(CD) $(SRC_ROOT) && $(ECHO) "Removing configuration directory for '$(CONF_NAME)'" && $(RM) -r $(OUTPUT_ROOT)) \
fi \
)
@$(ECHO) Cleaned everything, you will have to re-run configure.
clean-langtools:
$(call CleanComponent,langtools)
clean-corba:
$(call CleanComponent,corba)
clean-jaxp:
$(call CleanComponent,jaxp)
clean-jaxws:
$(call CleanComponent,jaxws)
clean-hotspot:
$(call CleanComponent,hotspot)
clean-jdk:
$(call CleanComponent,jdk)
clean-images:
$(call CleanComponent,images)
clean-overlay-images:
$(call CleanComponent,overlay-images)
clean-bootcycle-build:
$(call CleanComponent,bootcycle-build)
.PHONY: langtools corba jaxp jaxws hotspot jdk images overlay-images install
.PHONY: langtools-only corba-only jaxp-only jaxws-only hotspot-only jdk-only images-only overlay-images-only install-only
.PHONY: all test clean dist-clean bootcycle-images start-make
.PHONY: clean-langtools clean-corba clean-jaxp clean-jaxws clean-hotspot clean-jdk clean-images clean-overlay-images clean-bootcycle-build
FRC: # Force target