8007786: JDK-8002048 testcase doesn't work on Solaris
Summary: test built in into Solaris shell doesn't have -e operator
Reviewed-by: sla, sspitsyn
/*
* Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.
* DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
*
* This code is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 only, as
* published by the Free Software Foundation. Oracle designates this
* particular file as subject to the "Classpath" exception as provided
* by Oracle in the LICENSE file that accompanied this code.
*
* This code is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* version 2 for more details (a copy is included in the LICENSE file that
* accompanied this code).
*
* You should have received a copy of the GNU General Public License version
* 2 along with this work; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
* or visit www.oracle.com if you need additional information or have any
* questions.
*/
/*
* This file is available under and governed by the GNU General Public
* License version 2 only, as published by the Free Software Foundation.
* However, the following notice accompanied the original version of this
* file:
*
* Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* * Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* * Neither the name of JSR-310 nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
package java.time.temporal;
import static java.time.temporal.ChronoField.EPOCH_DAY;
import static java.time.temporal.ChronoField.OFFSET_SECONDS;
import static java.time.temporal.ChronoLocalDateTimeImpl.SECONDS_PER_DAY;
import static java.time.temporal.ChronoUnit.DAYS;
import java.io.IOException;
import java.io.InvalidObjectException;
import java.io.ObjectInput;
import java.io.ObjectOutput;
import java.io.ObjectStreamException;
import java.io.Serializable;
import java.time.Clock;
import java.time.DateTimeException;
import java.time.DayOfWeek;
import java.time.Instant;
import java.time.LocalDate;
import java.time.LocalTime;
import java.time.Month;
import java.time.ZoneId;
import java.time.ZoneOffset;
import java.time.format.DateTimeFormatter;
import java.time.format.DateTimeFormatters;
import java.time.format.DateTimeParseException;
import java.time.zone.ZoneRules;
import java.util.Objects;
/**
* A date with an offset from UTC/Greenwich in the ISO-8601 calendar system,
* such as {@code 2007-12-03+01:00}.
* <p>
* {@code OffsetDate} is an immutable date-time object that represents a date, often viewed
* as year-month-day-offset. This object can also access other date fields such as
* day-of-year, day-of-week and week-of-year.
* <p>
* This class does not store or represent a time.
* For example, the value "2nd October 2007 +02:00" can be stored
* in an {@code OffsetDate}.
*
* <h3>Specification for implementors</h3>
* This class is immutable and thread-safe.
*
* @since 1.8
*/
public final class OffsetDate
implements Temporal, TemporalAdjuster, Comparable<OffsetDate>, Serializable {
/**
* The minimum supported {@code OffsetDate}, '-999999999-01-01+18:00'.
* This is the minimum local date in the maximum offset
* (larger offsets are earlier on the time-line).
* This combines {@link LocalDate#MIN} and {@link ZoneOffset#MAX}.
* This could be used by an application as a "far past" date.
*/
public static final OffsetDate MIN = LocalDate.MIN.atOffset(ZoneOffset.MAX);
/**
* The maximum supported {@code OffsetDate}, '+999999999-12-31-18:00'.
* This is the maximum local date in the minimum offset
* (larger negative offsets are later on the time-line).
* This combines {@link LocalDate#MAX} and {@link ZoneOffset#MIN}.
* This could be used by an application as a "far future" date.
*/
public static final OffsetDate MAX = LocalDate.MAX.atOffset(ZoneOffset.MIN);
/**
* Serialization version.
*/
private static final long serialVersionUID = -4382054179074397774L;
/**
* The local date.
*/
private final LocalDate date;
/**
* The offset from UTC/Greenwich.
*/
private final ZoneOffset offset;
//-----------------------------------------------------------------------
/**
* Obtains the current date from the system clock in the default time-zone.
* <p>
* This will query the {@link java.time.Clock#systemDefaultZone() system clock} in the default
* time-zone to obtain the current date.
* The offset will be calculated from the time-zone in the clock.
* <p>
* Using this method will prevent the ability to use an alternate clock for testing
* because the clock is hard-coded.
*
* @return the current date using the system clock, not null
*/
public static OffsetDate now() {
return now(Clock.systemDefaultZone());
}
/**
* Obtains the current date from the system clock in the specified time-zone.
* <p>
* This will query the {@link Clock#system(java.time.ZoneId) system clock} to obtain the current date.
* Specifying the time-zone avoids dependence on the default time-zone.
* The offset will be calculated from the specified time-zone.
* <p>
* Using this method will prevent the ability to use an alternate clock for testing
* because the clock is hard-coded.
*
* @param zone the zone ID to use, not null
* @return the current date using the system clock, not null
*/
public static OffsetDate now(ZoneId zone) {
return now(Clock.system(zone));
}
/**
* Obtains the current date from the specified clock.
* <p>
* This will query the specified clock to obtain the current date - today.
* The offset will be calculated from the time-zone in the clock.
* <p>
* Using this method allows the use of an alternate clock for testing.
* The alternate clock may be introduced using {@link Clock dependency injection}.
*
* @param clock the clock to use, not null
* @return the current date, not null
*/
public static OffsetDate now(Clock clock) {
Objects.requireNonNull(clock, "clock");
final Instant now = clock.instant(); // called once
return ofInstant(now, clock.getZone().getRules().getOffset(now));
}
//-----------------------------------------------------------------------
/**
* Obtains an instance of {@code OffsetDate} from a local date and an offset.
*
* @param date the local date, not null
* @param offset the zone offset, not null
* @return the offset date, not null
*/
public static OffsetDate of(LocalDate date, ZoneOffset offset) {
return new OffsetDate(date, offset);
}
//-----------------------------------------------------------------------
/**
* Obtains an instance of {@code OffsetDate} from an {@code Instant} and zone ID.
* <p>
* This creates an offset date with the same instant as midnight at the
* start of day of the instant specified.
* Finding the offset from UTC/Greenwich is simple as there is only one valid
* offset for each instant.
*
* @param instant the instant to create the time from, not null
* @param zone the time-zone, which may be an offset, not null
* @return the offset time, not null
*/
public static OffsetDate ofInstant(Instant instant, ZoneId zone) {
Objects.requireNonNull(instant, "instant");
Objects.requireNonNull(zone, "zone");
ZoneRules rules = zone.getRules();
ZoneOffset offset = rules.getOffset(instant);
long epochSec = instant.getEpochSecond() + offset.getTotalSeconds(); // overflow caught later
long epochDay = Math.floorDiv(epochSec, SECONDS_PER_DAY);
LocalDate date = LocalDate.ofEpochDay(epochDay);
return new OffsetDate(date, offset);
}
//-----------------------------------------------------------------------
/**
* Obtains an instance of {@code OffsetDate} from a temporal object.
* <p>
* A {@code TemporalAccessor} represents some form of date and time information.
* This factory converts the arbitrary temporal object to an instance of {@code OffsetDate}.
* <p>
* The conversion extracts and combines {@code LocalDate} and {@code ZoneOffset}.
* <p>
* This method matches the signature of the functional interface {@link TemporalQuery}
* allowing it to be used in queries via method reference, {@code OffsetDate::from}.
*
* @param temporal the temporal object to convert, not null
* @return the offset date, not null
* @throws DateTimeException if unable to convert to an {@code OffsetDate}
*/
public static OffsetDate from(TemporalAccessor temporal) {
if (temporal instanceof OffsetDate) {
return (OffsetDate) temporal;
}
try {
LocalDate date = LocalDate.from(temporal);
ZoneOffset offset = ZoneOffset.from(temporal);
return new OffsetDate(date, offset);
} catch (DateTimeException ex) {
throw new DateTimeException("Unable to obtain OffsetDate from TemporalAccessor: " + temporal.getClass(), ex);
}
}
//-----------------------------------------------------------------------
/**
* Obtains an instance of {@code OffsetDate} from a text string such as {@code 2007-12-03+01:00}.
* <p>
* The string must represent a valid date and is parsed using
* {@link java.time.format.DateTimeFormatters#isoOffsetDate()}.
*
* @param text the text to parse such as "2007-12-03+01:00", not null
* @return the parsed offset date, not null
* @throws DateTimeParseException if the text cannot be parsed
*/
public static OffsetDate parse(CharSequence text) {
return parse(text, DateTimeFormatters.isoOffsetDate());
}
/**
* Obtains an instance of {@code OffsetDate} from a text string using a specific formatter.
* <p>
* The text is parsed using the formatter, returning a date.
*
* @param text the text to parse, not null
* @param formatter the formatter to use, not null
* @return the parsed offset date, not null
* @throws DateTimeParseException if the text cannot be parsed
*/
public static OffsetDate parse(CharSequence text, DateTimeFormatter formatter) {
Objects.requireNonNull(formatter, "formatter");
return formatter.parse(text, OffsetDate::from);
}
//-----------------------------------------------------------------------
/**
* Constructor.
*
* @param date the local date, not null
* @param offset the zone offset, not null
*/
private OffsetDate(LocalDate date, ZoneOffset offset) {
this.date = Objects.requireNonNull(date, "date");
this.offset = Objects.requireNonNull(offset, "offset");
}
/**
* Returns a new date based on this one, returning {@code this} where possible.
*
* @param date the date to create with, not null
* @param offset the zone offset to create with, not null
*/
private OffsetDate with(LocalDate date, ZoneOffset offset) {
if (this.date == date && this.offset.equals(offset)) {
return this;
}
return new OffsetDate(date, offset);
}
//-----------------------------------------------------------------------
/**
* Checks if the specified field is supported.
* <p>
* This checks if this date can be queried for the specified field.
* If false, then calling the {@link #range(TemporalField) range} and
* {@link #get(TemporalField) get} methods will throw an exception.
* <p>
* If the field is a {@link ChronoField} then the query is implemented here.
* The {@link #isSupported(TemporalField) supported fields} will return valid
* values based on this date-time.
* The supported fields are:
* <ul>
* <li>{@code DAY_OF_WEEK}
* <li>{@code ALIGNED_DAY_OF_WEEK_IN_MONTH}
* <li>{@code ALIGNED_DAY_OF_WEEK_IN_YEAR}
* <li>{@code DAY_OF_MONTH}
* <li>{@code DAY_OF_YEAR}
* <li>{@code EPOCH_DAY}
* <li>{@code ALIGNED_WEEK_OF_MONTH}
* <li>{@code ALIGNED_WEEK_OF_YEAR}
* <li>{@code MONTH_OF_YEAR}
* <li>{@code EPOCH_MONTH}
* <li>{@code YEAR_OF_ERA}
* <li>{@code YEAR}
* <li>{@code ERA}
* <li>{@code OFFSET_SECONDS}
* </ul>
* All other {@code ChronoField} instances will return false.
* <p>
* If the field is not a {@code ChronoField}, then the result of this method
* is obtained by invoking {@code TemporalField.doIsSupported(TemporalAccessor)}
* passing {@code this} as the argument.
* Whether the field is supported is determined by the field.
*
* @param field the field to check, null returns false
* @return true if the field is supported on this date, false if not
*/
@Override
public boolean isSupported(TemporalField field) {
if (field instanceof ChronoField) {
return ((ChronoField) field).isDateField() || field == OFFSET_SECONDS;
}
return field != null && field.doIsSupported(this);
}
/**
* Gets the range of valid values for the specified field.
* <p>
* The range object expresses the minimum and maximum valid values for a field.
* This date is used to enhance the accuracy of the returned range.
* If it is not possible to return the range, because the field is not supported
* or for some other reason, an exception is thrown.
* <p>
* If the field is a {@link ChronoField} then the query is implemented here.
* The {@link #isSupported(TemporalField) supported fields} will return
* appropriate range instances.
* All other {@code ChronoField} instances will throw a {@code DateTimeException}.
* <p>
* If the field is not a {@code ChronoField}, then the result of this method
* is obtained by invoking {@code TemporalField.doRange(TemporalAccessor)}
* passing {@code this} as the argument.
* Whether the range can be obtained is determined by the field.
*
* @param field the field to query the range for, not null
* @return the range of valid values for the field, not null
* @throws DateTimeException if the range for the field cannot be obtained
*/
@Override
public ValueRange range(TemporalField field) {
if (field instanceof ChronoField) {
if (field == OFFSET_SECONDS) {
return field.range();
}
return date.range(field);
}
return field.doRange(this);
}
/**
* Gets the value of the specified field from this date as an {@code int}.
* <p>
* This queries this date for the value for the specified field.
* The returned value will always be within the valid range of values for the field.
* If it is not possible to return the value, because the field is not supported
* or for some other reason, an exception is thrown.
* <p>
* If the field is a {@link ChronoField} then the query is implemented here.
* The {@link #isSupported(TemporalField) supported fields} will return valid
* values based on this date, except {@code EPOCH_DAY} and {@code EPOCH_MONTH}
* which are too large to fit in an {@code int} and throw a {@code DateTimeException}.
* All other {@code ChronoField} instances will throw a {@code DateTimeException}.
* <p>
* If the field is not a {@code ChronoField}, then the result of this method
* is obtained by invoking {@code TemporalField.doGet(TemporalAccessor)}
* passing {@code this} as the argument. Whether the value can be obtained,
* and what the value represents, is determined by the field.
*
* @param field the field to get, not null
* @return the value for the field
* @throws DateTimeException if a value for the field cannot be obtained
* @throws ArithmeticException if numeric overflow occurs
*/
@Override // override for Javadoc
public int get(TemporalField field) {
return Temporal.super.get(field);
}
/**
* Gets the value of the specified field from this date as a {@code long}.
* <p>
* This queries this date for the value for the specified field.
* If it is not possible to return the value, because the field is not supported
* or for some other reason, an exception is thrown.
* <p>
* If the field is a {@link ChronoField} then the query is implemented here.
* The {@link #isSupported(TemporalField) supported fields} will return valid
* values based on this date.
* All other {@code ChronoField} instances will throw a {@code DateTimeException}.
* <p>
* If the field is not a {@code ChronoField}, then the result of this method
* is obtained by invoking {@code TemporalField.doGet(TemporalAccessor)}
* passing {@code this} as the argument. Whether the value can be obtained,
* and what the value represents, is determined by the field.
*
* @param field the field to get, not null
* @return the value for the field
* @throws DateTimeException if a value for the field cannot be obtained
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public long getLong(TemporalField field) {
if (field instanceof ChronoField) {
if (field == OFFSET_SECONDS) {
return getOffset().getTotalSeconds();
}
return date.getLong(field);
}
return field.doGet(this);
}
//-----------------------------------------------------------------------
/**
* Gets the zone offset, such as '+01:00'.
* <p>
* This is the offset of the local date from UTC/Greenwich.
*
* @return the zone offset, not null
*/
public ZoneOffset getOffset() {
return offset;
}
/**
* Returns a copy of this {@code OffsetDate} with the specified offset.
* <p>
* This method returns an object with the same {@code LocalDate} and the specified {@code ZoneOffset}.
* No calculation is needed or performed.
* For example, if this time represents {@code 2007-12-03+02:00} and the offset specified is
* {@code +03:00}, then this method will return {@code 2007-12-03+03:00}.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param offset the zone offset to change to, not null
* @return an {@code OffsetDate} based on this date with the requested offset, not null
*/
public OffsetDate withOffset(ZoneOffset offset) {
Objects.requireNonNull(offset, "offset");
return with(date, offset);
}
//-----------------------------------------------------------------------
/**
* Gets the {@code LocalDate} part of this date-time.
* <p>
* This returns a {@code LocalDate} with the same year, month and day
* as this date-time.
*
* @return the date part of this date-time, not null
*/
public LocalDate getDate() {
return date;
}
//-----------------------------------------------------------------------
/**
* Gets the year field.
* <p>
* This method returns the primitive {@code int} value for the year.
* <p>
* The year returned by this method is proleptic as per {@code get(YEAR)}.
* To obtain the year-of-era, use {@code get(YEAR_OF_ERA}.
*
* @return the year, from MIN_YEAR to MAX_YEAR
*/
public int getYear() {
return date.getYear();
}
/**
* Gets the month-of-year field from 1 to 12.
* <p>
* This method returns the month as an {@code int} from 1 to 12.
* Application code is frequently clearer if the enum {@link Month}
* is used by calling {@link #getMonth()}.
*
* @return the month-of-year, from 1 to 12
* @see #getMonth()
*/
public int getMonthValue() {
return date.getMonthValue();
}
/**
* Gets the month-of-year field using the {@code Month} enum.
* <p>
* This method returns the enum {@link Month} for the month.
* This avoids confusion as to what {@code int} values mean.
* If you need access to the primitive {@code int} value then the enum
* provides the {@link Month#getValue() int value}.
*
* @return the month-of-year, not null
* @see #getMonthValue()
*/
public Month getMonth() {
return date.getMonth();
}
/**
* Gets the day-of-month field.
* <p>
* This method returns the primitive {@code int} value for the day-of-month.
*
* @return the day-of-month, from 1 to 31
*/
public int getDayOfMonth() {
return date.getDayOfMonth();
}
/**
* Gets the day-of-year field.
* <p>
* This method returns the primitive {@code int} value for the day-of-year.
*
* @return the day-of-year, from 1 to 365, or 366 in a leap year
*/
public int getDayOfYear() {
return date.getDayOfYear();
}
/**
* Gets the day-of-week field, which is an enum {@code DayOfWeek}.
* <p>
* This method returns the enum {@link java.time.DayOfWeek} for the day-of-week.
* This avoids confusion as to what {@code int} values mean.
* If you need access to the primitive {@code int} value then the enum
* provides the {@link java.time.DayOfWeek#getValue() int value}.
* <p>
* Additional information can be obtained from the {@code DayOfWeek}.
* This includes textual names of the values.
*
* @return the day-of-week, not null
*/
public DayOfWeek getDayOfWeek() {
return date.getDayOfWeek();
}
//-----------------------------------------------------------------------
/**
* Returns an adjusted copy of this date.
* <p>
* This returns a new {@code OffsetDate}, based on this one, with the date adjusted.
* The adjustment takes place using the specified adjuster strategy object.
* Read the documentation of the adjuster to understand what adjustment will be made.
* <p>
* A simple adjuster might simply set the one of the fields, such as the year field.
* A more complex adjuster might set the date to the last day of the month.
* A selection of common adjustments is provided in {@link java.time.temporal.Adjusters}.
* These include finding the "last day of the month" and "next Wednesday".
* Key date-time classes also implement the {@code TemporalAdjuster} interface,
* such as {@link Month} and {@link java.time.temporal.MonthDay MonthDay}.
* The adjuster is responsible for handling special cases, such as the varying
* lengths of month and leap years.
* <p>
* For example this code returns a date on the last day of July:
* <pre>
* import static java.time.Month.*;
* import static java.time.temporal.Adjusters.*;
*
* result = offsetDate.with(JULY).with(lastDayOfMonth());
* </pre>
* <p>
* The classes {@link LocalDate} and {@link ZoneOffset} implement {@code TemporalAdjuster},
* thus this method can be used to change the date or offset:
* <pre>
* result = offsetDate.with(date);
* result = offsetDate.with(offset);
* </pre>
* <p>
* The result of this method is obtained by invoking the
* {@link TemporalAdjuster#adjustInto(Temporal)} method on the
* specified adjuster passing {@code this} as the argument.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param adjuster the adjuster to use, not null
* @return an {@code OffsetDate} based on {@code this} with the adjustment made, not null
* @throws DateTimeException if the adjustment cannot be made
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public OffsetDate with(TemporalAdjuster adjuster) {
// optimizations
if (adjuster instanceof LocalDate) {
return with((LocalDate) adjuster, offset);
} else if (adjuster instanceof ZoneOffset) {
return with(date, (ZoneOffset) adjuster);
} else if (adjuster instanceof OffsetDate) {
return (OffsetDate) adjuster;
}
return (OffsetDate) adjuster.adjustInto(this);
}
/**
* Returns a copy of this date with the specified field set to a new value.
* <p>
* This returns a new {@code OffsetDate}, based on this one, with the value
* for the specified field changed.
* This can be used to change any supported field, such as the year, month or day-of-month.
* If it is not possible to set the value, because the field is not supported or for
* some other reason, an exception is thrown.
* <p>
* In some cases, changing the specified field can cause the resulting date to become invalid,
* such as changing the month from 31st January to February would make the day-of-month invalid.
* In cases like this, the field is responsible for resolving the date. Typically it will choose
* the previous valid date, which would be the last valid day of February in this example.
* <p>
* If the field is a {@link ChronoField} then the adjustment is implemented here.
* <p>
* The {@code OFFSET_SECONDS} field will return a date with the specified offset.
* The local date is unaltered. If the new offset value is outside the valid range
* then a {@code DateTimeException} will be thrown.
* <p>
* The other {@link #isSupported(TemporalField) supported fields} will behave as per
* the matching method on {@link LocalDate#with(TemporalField, long)} LocalDate}.
* In this case, the offset is not part of the calculation and will be unchanged.
* <p>
* All other {@code ChronoField} instances will throw a {@code DateTimeException}.
* <p>
* If the field is not a {@code ChronoField}, then the result of this method
* is obtained by invoking {@code TemporalField.doWith(Temporal, long)}
* passing {@code this} as the argument. In this case, the field determines
* whether and how to adjust the instant.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param field the field to set in the result, not null
* @param newValue the new value of the field in the result
* @return an {@code OffsetDate} based on {@code this} with the specified field set, not null
* @throws DateTimeException if the field cannot be set
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public OffsetDate with(TemporalField field, long newValue) {
if (field instanceof ChronoField) {
if (field == OFFSET_SECONDS) {
ChronoField f = (ChronoField) field;
return with(date, ZoneOffset.ofTotalSeconds(f.checkValidIntValue(newValue)));
}
return with(date.with(field, newValue), offset);
}
return field.doWith(this, newValue);
}
//-----------------------------------------------------------------------
/**
* Returns a copy of this {@code OffsetDate} with the year altered.
* The offset does not affect the calculation and will be the same in the result.
* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param year the year to set in the result, from MIN_YEAR to MAX_YEAR
* @return an {@code OffsetDate} based on this date with the requested year, not null
* @throws DateTimeException if the year value is invalid
*/
public OffsetDate withYear(int year) {
return with(date.withYear(year), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the month-of-year altered.
* The offset does not affect the calculation and will be the same in the result.
* If the day-of-month is invalid for the year, it will be changed to the last valid day of the month.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param month the month-of-year to set in the result, from 1 (January) to 12 (December)
* @return an {@code OffsetDate} based on this date with the requested month, not null
* @throws DateTimeException if the month-of-year value is invalid
*/
public OffsetDate withMonth(int month) {
return with(date.withMonth(month), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the day-of-month altered.
* If the resulting date is invalid, an exception is thrown.
* The offset does not affect the calculation and will be the same in the result.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param dayOfMonth the day-of-month to set in the result, from 1 to 28-31
* @return an {@code OffsetDate} based on this date with the requested day, not null
* @throws DateTimeException if the day-of-month value is invalid
* @throws DateTimeException if the day-of-month is invalid for the month-year
*/
public OffsetDate withDayOfMonth(int dayOfMonth) {
return with(date.withDayOfMonth(dayOfMonth), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the day-of-year altered.
* If the resulting date is invalid, an exception is thrown.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param dayOfYear the day-of-year to set in the result, from 1 to 365-366
* @return an {@code OffsetDate} based on this date with the requested day, not null
* @throws DateTimeException if the day-of-year value is invalid
* @throws DateTimeException if the day-of-year is invalid for the year
*/
public OffsetDate withDayOfYear(int dayOfYear) {
return with(date.withDayOfYear(dayOfYear), offset);
}
//-----------------------------------------------------------------------
/**
* Returns a copy of this date with the specified period added.
* <p>
* This method returns a new date based on this date with the specified period added.
* The adder is typically {@link java.time.Period} but may be any other type implementing
* the {@link TemporalAdder} interface.
* The calculation is delegated to the specified adjuster, which typically calls
* back to {@link #plus(long, TemporalUnit)}.
* The offset is not part of the calculation and will be unchanged in the result.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param adder the adder to use, not null
* @return an {@code OffsetDate} based on this date with the addition made, not null
* @throws DateTimeException if the addition cannot be made
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public OffsetDate plus(TemporalAdder adder) {
return (OffsetDate) adder.addTo(this);
}
/**
* Returns a copy of this date with the specified period added.
* <p>
* This method returns a new date based on this date with the specified period added.
* This can be used to add any period that is defined by a unit, for example to add years, months or days.
* The unit is responsible for the details of the calculation, including the resolution
* of any edge cases in the calculation.
* The offset is not part of the calculation and will be unchanged in the result.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param amountToAdd the amount of the unit to add to the result, may be negative
* @param unit the unit of the period to add, not null
* @return an {@code OffsetDate} based on this date with the specified period added, not null
* @throws DateTimeException if the unit cannot be added to this type
*/
@Override
public OffsetDate plus(long amountToAdd, TemporalUnit unit) {
if (unit instanceof ChronoUnit) {
return with(date.plus(amountToAdd, unit), offset);
}
return unit.doPlus(this, amountToAdd);
}
//-----------------------------------------------------------------------
/**
* Returns a copy of this {@code OffsetDate} with the specified period in years added.
* <p>
* This method adds the specified amount to the years field in three steps:
* <ol>
* <li>Add the input years to the year field</li>
* <li>Check if the resulting date would be invalid</li>
* <li>Adjust the day-of-month to the last valid day if necessary</li>
* </ol>
* <p>
* For example, 2008-02-29 (leap year) plus one year would result in the
* invalid date 2009-02-29 (standard year). Instead of returning an invalid
* result, the last valid day of the month, 2009-02-28, is selected instead.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param years the years to add, may be negative
* @return an {@code OffsetDate} based on this date with the years added, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate plusYears(long years) {
return with(date.plusYears(years), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified period in months added.
* <p>
* This method adds the specified amount to the months field in three steps:
* <ol>
* <li>Add the input months to the month-of-year field</li>
* <li>Check if the resulting date would be invalid</li>
* <li>Adjust the day-of-month to the last valid day if necessary</li>
* </ol>
* <p>
* For example, 2007-03-31 plus one month would result in the invalid date
* 2007-04-31. Instead of returning an invalid result, the last valid day
* of the month, 2007-04-30, is selected instead.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param months the months to add, may be negative
* @return an {@code OffsetDate} based on this date with the months added, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate plusMonths(long months) {
return with(date.plusMonths(months), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified period in weeks added.
* <p>
* This method adds the specified amount in weeks to the days field incrementing
* the month and year fields as necessary to ensure the result remains valid.
* The result is only invalid if the maximum/minimum year is exceeded.
* <p>
* For example, 2008-12-31 plus one week would result in 2009-01-07.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param weeks the weeks to add, may be negative
* @return an {@code OffsetDate} based on this date with the weeks added, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate plusWeeks(long weeks) {
return with(date.plusWeeks(weeks), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified period in days added.
* <p>
* This method adds the specified amount to the days field incrementing the
* month and year fields as necessary to ensure the result remains valid.
* The result is only invalid if the maximum/minimum year is exceeded.
* <p>
* For example, 2008-12-31 plus one day would result in 2009-01-01.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param days the days to add, may be negative
* @return an {@code OffsetDate} based on this date with the days added, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate plusDays(long days) {
return with(date.plusDays(days), offset);
}
//-----------------------------------------------------------------------
/**
* Returns a copy of this date with the specified period subtracted.
* <p>
* This method returns a new date based on this date with the specified period subtracted.
* The subtractor is typically {@link java.time.Period} but may be any other type implementing
* the {@link TemporalSubtractor} interface.
* The calculation is delegated to the specified adjuster, which typically calls
* back to {@link #minus(long, TemporalUnit)}.
* The offset is not part of the calculation and will be unchanged in the result.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param subtractor the subtractor to use, not null
* @return an {@code OffsetDate} based on this date with the subtraction made, not null
* @throws DateTimeException if the subtraction cannot be made
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public OffsetDate minus(TemporalSubtractor subtractor) {
return (OffsetDate) subtractor.subtractFrom(this);
}
/**
* Returns a copy of this date with the specified period subtracted.
* <p>
* This method returns a new date based on this date with the specified period subtracted.
* This can be used to subtract any period that is defined by a unit, for example to subtract years, months or days.
* The unit is responsible for the details of the calculation, including the resolution
* of any edge cases in the calculation.
* The offset is not part of the calculation and will be unchanged in the result.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param amountToSubtract the amount of the unit to subtract from the result, may be negative
* @param unit the unit of the period to subtract, not null
* @return an {@code OffsetDate} based on this date with the specified period subtracted, not null
* @throws DateTimeException if the unit cannot be added to this type
*/
@Override
public OffsetDate minus(long amountToSubtract, TemporalUnit unit) {
return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit));
}
//-----------------------------------------------------------------------
/**
* Returns a copy of this {@code OffsetDate} with the specified period in years subtracted.
* <p>
* This method subtracts the specified amount from the years field in three steps:
* <ol>
* <li>Subtract the input years to the year field</li>
* <li>Check if the resulting date would be invalid</li>
* <li>Adjust the day-of-month to the last valid day if necessary</li>
* </ol>
* <p>
* For example, 2008-02-29 (leap year) minus one year would result in the
* invalid date 2007-02-29 (standard year). Instead of returning an invalid
* result, the last valid day of the month, 2007-02-28, is selected instead.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param years the years to subtract, may be negative
* @return an {@code OffsetDate} based on this date with the years subtracted, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate minusYears(long years) {
return with(date.minusYears(years), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified period in months subtracted.
* <p>
* This method subtracts the specified amount from the months field in three steps:
* <ol>
* <li>Subtract the input months to the month-of-year field</li>
* <li>Check if the resulting date would be invalid</li>
* <li>Adjust the day-of-month to the last valid day if necessary</li>
* </ol>
* <p>
* For example, 2007-03-31 minus one month would result in the invalid date
* 2007-02-31. Instead of returning an invalid result, the last valid day
* of the month, 2007-02-28, is selected instead.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param months the months to subtract, may be negative
* @return an {@code OffsetDate} based on this date with the months subtracted, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate minusMonths(long months) {
return with(date.minusMonths(months), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified period in weeks subtracted.
* <p>
* This method subtracts the specified amount in weeks from the days field decrementing
* the month and year fields as necessary to ensure the result remains valid.
* The result is only invalid if the maximum/minimum year is exceeded.
* <p>
* For example, 2009-01-07 minus one week would result in 2008-12-31.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param weeks the weeks to subtract, may be negative
* @return an {@code OffsetDate} based on this date with the weeks subtracted, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate minusWeeks(long weeks) {
return with(date.minusWeeks(weeks), offset);
}
/**
* Returns a copy of this {@code OffsetDate} with the specified number of days subtracted.
* <p>
* This method subtracts the specified amount from the days field decrementing the
* month and year fields as necessary to ensure the result remains valid.
* The result is only invalid if the maximum/minimum year is exceeded.
* <p>
* For example, 2009-01-01 minus one day would result in 2008-12-31.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param days the days to subtract, may be negative
* @return an {@code OffsetDate} based on this date with the days subtracted, not null
* @throws DateTimeException if the result exceeds the supported date range
*/
public OffsetDate minusDays(long days) {
return with(date.minusDays(days), offset);
}
//-----------------------------------------------------------------------
/**
* Queries this date using the specified query.
* <p>
* This queries this date using the specified query strategy object.
* The {@code TemporalQuery} object defines the logic to be used to
* obtain the result. Read the documentation of the query to understand
* what the result of this method will be.
* <p>
* The result of this method is obtained by invoking the
* {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the
* specified query passing {@code this} as the argument.
*
* @param <R> the type of the result
* @param query the query to invoke, not null
* @return the query result, null may be returned (defined by the query)
* @throws DateTimeException if unable to query (defined by the query)
* @throws ArithmeticException if numeric overflow occurs (defined by the query)
*/
@SuppressWarnings("unchecked")
@Override
public <R> R query(TemporalQuery<R> query) {
if (query == Queries.chrono()) {
return (R) ISOChrono.INSTANCE;
} else if (query == Queries.precision()) {
return (R) DAYS;
} else if (query == Queries.offset() || query == Queries.zone()) {
return (R) getOffset();
}
return Temporal.super.query(query);
}
/**
* Adjusts the specified temporal object to have the same offset and date
* as this object.
* <p>
* This returns a temporal object of the same observable type as the input
* with the offset and date changed to be the same as this.
* <p>
* The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)}
* twice, passing {@link ChronoField#OFFSET_SECONDS} and
* {@link ChronoField#EPOCH_DAY} as the fields.
* <p>
* In most cases, it is clearer to reverse the calling pattern by using
* {@link Temporal#with(TemporalAdjuster)}:
* <pre>
* // these two lines are equivalent, but the second approach is recommended
* temporal = thisOffsetDate.adjustInto(temporal);
* temporal = temporal.with(thisOffsetDate);
* </pre>
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param temporal the target object to be adjusted, not null
* @return the adjusted object, not null
* @throws DateTimeException if unable to make the adjustment
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public Temporal adjustInto(Temporal temporal) {
return temporal
.with(OFFSET_SECONDS, getOffset().getTotalSeconds())
.with(EPOCH_DAY, getDate().toEpochDay());
}
/**
* Calculates the period between this date and another date in
* terms of the specified unit.
* <p>
* This calculates the period between two dates in terms of a single unit.
* The start and end points are {@code this} and the specified date.
* The result will be negative if the end is before the start.
* For example, the period in days between two dates can be calculated
* using {@code startDate.periodUntil(endDate, DAYS)}.
* <p>
* The {@code Temporal} passed to this method must be an {@code OffsetDate}.
* If the offset differs between the two times, then the specified
* end time is normalized to have the same offset as this time.
* <p>
* The calculation returns a whole number, representing the number of
* complete units between the two dates.
* For example, the period in months between 2012-06-15Z and 2012-08-14Z
* will only be one month as it is one day short of two months.
* <p>
* This method operates in association with {@link TemporalUnit#between}.
* The result of this method is a {@code long} representing the amount of
* the specified unit. By contrast, the result of {@code between} is an
* object that can be used directly in addition/subtraction:
* <pre>
* long period = start.periodUntil(end, MONTHS); // this method
* dateTime.plus(MONTHS.between(start, end)); // use in plus/minus
* </pre>
* <p>
* The calculation is implemented in this method for {@link ChronoUnit}.
* The units {@code DAYS}, {@code WEEKS}, {@code MONTHS}, {@code YEARS},
* {@code DECADES}, {@code CENTURIES}, {@code MILLENNIA} and {@code ERAS}
* are supported. Other {@code ChronoUnit} values will throw an exception.
* <p>
* If the unit is not a {@code ChronoUnit}, then the result of this method
* is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)}
* passing {@code this} as the first argument and the input temporal as
* the second argument.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param endDate the end date, which must be an {@code OffsetDate}, not null
* @param unit the unit to measure the period in, not null
* @return the amount of the period between this date and the end date
* @throws DateTimeException if the period cannot be calculated
* @throws ArithmeticException if numeric overflow occurs
*/
@Override
public long periodUntil(Temporal endDate, TemporalUnit unit) {
if (endDate instanceof OffsetDate == false) {
Objects.requireNonNull(endDate, "endDate");
throw new DateTimeException("Unable to calculate period between objects of two different types");
}
if (unit instanceof ChronoUnit) {
OffsetDate end = (OffsetDate) endDate;
long offsetDiff = end.offset.getTotalSeconds() - offset.getTotalSeconds();
LocalDate endLocal = end.date.plusDays(Math.floorDiv(-offsetDiff, SECONDS_PER_DAY));
return date.periodUntil(endLocal, unit);
}
return unit.between(this, endDate).getAmount();
}
//-----------------------------------------------------------------------
/**
* Returns an offset date-time formed from this date at the specified time.
* <p>
* This combines this date with the specified time to form an {@code OffsetDateTime}.
* All possible combinations of date and time are valid.
* <p>
* This instance is immutable and unaffected by this method call.
*
* @param time the time to combine with, not null
* @return the offset date-time formed from this date and the specified time, not null
*/
public OffsetDateTime atTime(LocalTime time) {
return OffsetDateTime.of(date, time, offset);
}
//-----------------------------------------------------------------------
/**
* Converts this date to midnight at the start of day in epoch seconds.
*
* @return the epoch seconds value
*/
private long toEpochSecond() {
long epochDay = date.toEpochDay();
long secs = epochDay * SECONDS_PER_DAY;
return secs - offset.getTotalSeconds();
}
//-----------------------------------------------------------------------
/**
* Compares this {@code OffsetDate} to another date.
* <p>
* The comparison is based first on the UTC equivalent instant, then on the local date.
* It is "consistent with equals", as defined by {@link Comparable}.
* <p>
* For example, the following is the comparator order:
* <ol>
* <li>2008-06-29-11:00</li>
* <li>2008-06-29-12:00</li>
* <li>2008-06-30+12:00</li>
* <li>2008-06-29-13:00</li>
* </ol>
* Values #2 and #3 represent the same instant on the time-line.
* When two values represent the same instant, the local date is compared
* to distinguish them. This step is needed to make the ordering
* consistent with {@code equals()}.
* <p>
* To compare the underlying local date of two {@code TemporalAccessor} instances,
* use {@link ChronoField#EPOCH_DAY} as a comparator.
*
* @param other the other date to compare to, not null
* @return the comparator value, negative if less, positive if greater
*/
@Override
public int compareTo(OffsetDate other) {
if (offset.equals(other.offset)) {
return date.compareTo(other.date);
}
int compare = Long.compare(toEpochSecond(), other.toEpochSecond());
if (compare == 0) {
compare = date.compareTo(other.date);
}
return compare;
}
//-----------------------------------------------------------------------
/**
* Checks if the instant of midnight at the start of this {@code OffsetDate}
* is after midnight at the start of the specified date.
* <p>
* This method differs from the comparison in {@link #compareTo} in that it
* only compares the instant of the date. This is equivalent to using
* {@code date1.toEpochSecond().isAfter(date2.toEpochSecond())}.
*
* @param other the other date to compare to, not null
* @return true if this is after the instant of the specified date
*/
public boolean isAfter(OffsetDate other) {
return toEpochSecond() > other.toEpochSecond();
}
/**
* Checks if the instant of midnight at the start of this {@code OffsetDate}
* is before midnight at the start of the specified date.
* <p>
* This method differs from the comparison in {@link #compareTo} in that it
* only compares the instant of the date. This is equivalent to using
* {@code date1.toEpochSecond().isBefore(date2.toEpochSecond())}.
*
* @param other the other date to compare to, not null
* @return true if this is before the instant of the specified date
*/
public boolean isBefore(OffsetDate other) {
return toEpochSecond() < other.toEpochSecond();
}
/**
* Checks if the instant of midnight at the start of this {@code OffsetDate}
* equals midnight at the start of the specified date.
* <p>
* This method differs from the comparison in {@link #compareTo} and {@link #equals}
* in that it only compares the instant of the date. This is equivalent to using
* {@code date1.toEpochSecond().equals(date2.toEpochSecond())}.
*
* @param other the other date to compare to, not null
* @return true if the instant equals the instant of the specified date
*/
public boolean isEqual(OffsetDate other) {
return toEpochSecond() == other.toEpochSecond();
}
//-----------------------------------------------------------------------
/**
* Checks if this date is equal to another date.
* <p>
* The comparison is based on the local-date and the offset.
* To compare for the same instant on the time-line, use {@link #isEqual(OffsetDate)}.
* <p>
* Only objects of type {@code OffsetDate} are compared, other types return false.
* To compare the underlying local date of two {@code TemporalAccessor} instances,
* use {@link ChronoField#EPOCH_DAY} as a comparator.
*
* @param obj the object to check, null returns false
* @return true if this is equal to the other date
*/
@Override
public boolean equals(Object obj) {
if (this == obj) {
return true;
}
if (obj instanceof OffsetDate) {
OffsetDate other = (OffsetDate) obj;
return date.equals(other.date) && offset.equals(other.offset);
}
return false;
}
/**
* A hash code for this date.
*
* @return a suitable hash code
*/
@Override
public int hashCode() {
return date.hashCode() ^ offset.hashCode();
}
//-----------------------------------------------------------------------
/**
* Outputs this date as a {@code String}, such as {@code 2007-12-03+01:00}.
* <p>
* The output will be in the ISO-8601 format {@code yyyy-MM-ddXXXXX}.
*
* @return a string representation of this date, not null
*/
@Override
public String toString() {
return date.toString() + offset.toString();
}
/**
* Outputs this date as a {@code String} using the formatter.
* <p>
* This date will be passed to the formatter
* {@link DateTimeFormatter#print(TemporalAccessor) print method}.
*
* @param formatter the formatter to use, not null
* @return the formatted date string, not null
* @throws DateTimeException if an error occurs during printing
*/
public String toString(DateTimeFormatter formatter) {
Objects.requireNonNull(formatter, "formatter");
return formatter.print(this);
}
//-----------------------------------------------------------------------
/**
* Writes the object using a
* <a href="../../../serialized-form.html#java.time.temporal.Ser">dedicated serialized form</a>.
* <pre>
* out.writeByte(1); // identifies this as a OffsetDateTime
* out.writeObject(date);
* out.writeObject(offset);
* </pre>
*
* @return the instance of {@code Ser}, not null
*/
private Object writeReplace() {
return new Ser(Ser.OFFSET_DATE_TYPE, this);
}
/**
* Defend against malicious streams.
* @return never
* @throws InvalidObjectException always
*/
private Object readResolve() throws ObjectStreamException {
throw new InvalidObjectException("Deserialization via serialization delegate");
}
void writeExternal(ObjectOutput out) throws IOException {
out.writeObject(date);
out.writeObject(offset);
}
static OffsetDate readExternal(ObjectInput in) throws IOException, ClassNotFoundException {
LocalDate date = (LocalDate) in.readObject();
ZoneOffset offset = (ZoneOffset) in.readObject();
return OffsetDate.of(date, offset);
}
}