8015986: Incorrect Localization of HijrahChronology
Reviewed-by: naoto
Contributed-by: scolebourne@joda.org, roger.riggs@oracle.com
#
# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# If NEWBUILD is defined, use the new build-infra Makefiles and configure.
# See NewMakefile.gmk for more information.
# If not specified, select what the default build is
ifndef NEWBUILD
NEWBUILD=true
endif
ifeq ($(NEWBUILD),true)
# The new top level Makefile
include NewMakefile.gmk
else # Original Makefile logic
BUILD_PARENT_DIRECTORY=.
# Basename of any originally supplied ALT_OUTPUTDIR directory
ifndef ORIG_OUTPUTDIR_BASENAME
ifdef ALT_OUTPUTDIR
ORIG_OUTPUTDIR_BASENAME := $(shell basename $(ALT_OUTPUTDIR))
else
ORIG_OUTPUTDIR_BASENAME = $(PLATFORM)-$(ARCH)
endif
endif
export ORIG_OUTPUTDIR_BASENAME
# The three possible directories created for output (3 build flavors)
OUTPUTDIR_BASENAME- = $(ORIG_OUTPUTDIR_BASENAME)
OUTPUTDIR_BASENAME-debug = $(ORIG_OUTPUTDIR_BASENAME)-debug
OUTPUTDIR_BASENAME-fastdebug = $(ORIG_OUTPUTDIR_BASENAME)-fastdebug
# Relative path to a debug output area
REL_JDK_OUTPUTDIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))
# The created jdk image directory
JDK_IMAGE_DIRNAME = j2sdk-image
JDK_IMAGE_DIR = $(OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
ABS_JDK_IMAGE_DIR = $(ABS_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
# Relative path from an output directory to the image directory
REL_JDK_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))/$(JDK_IMAGE_DIRNAME)
REL_JDK_DEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-debug)/$(JDK_IMAGE_DIRNAME)
REL_JDK_FASTDEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-fastdebug)/$(JDK_IMAGE_DIRNAME)
ifndef TOPDIR
TOPDIR:=.
endif
ifndef JDK_TOPDIR
JDK_TOPDIR=$(TOPDIR)/jdk
endif
ifndef JDK_MAKE_SHARED_DIR
JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared
endif
default: all
include $(JDK_MAKE_SHARED_DIR)/Defs-control.gmk
include ./make/Defs-internal.gmk
include ./make/sanity-rules.gmk
include ./make/hotspot-rules.gmk
include ./make/langtools-rules.gmk
include ./make/corba-rules.gmk
include ./make/jaxp-rules.gmk
include ./make/jaxws-rules.gmk
include ./make/jdk-rules.gmk
include ./make/nashorn-rules.gmk
include ./make/install-rules.gmk
include ./make/sponsors-rules.gmk
include ./make/deploy-rules.gmk
all:: sanity
ifeq ($(SKIP_FASTDEBUG_BUILD), false)
all:: fastdebug_build
endif
ifeq ($(SKIP_DEBUG_BUILD), false)
all:: debug_build
endif
all:: all_product_build
all_product_build::
# Everything for a full product build
ifeq ($(SKIP_PRODUCT_BUILD), false)
all_product_build:: product_build
ifeq ($(BUILD_INSTALL), true)
all_product_build:: $(INSTALL)
clobber:: install-clobber
endif
ifeq ($(BUILD_SPONSORS), true)
all_product_build:: $(SPONSORS)
clobber:: sponsors-clobber
endif
ifneq ($(SKIP_COMPARE_IMAGES), true)
all_product_build:: compare-image
endif
endif
define StartTimer
$(MKDIR) -p $(BUILDTIMESDIR)
$(RM) $(BUILDTIMESDIR)/build_time_*
$(call RecordStartTime,TOTAL)
endef
define StopTimer
$(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,TOTAL) && $(call ReportBuildTimes,$1),)
endef
# Generic build of basic repo series
generic_build_repo_series:: $(SOURCE_TIPS)
$(MKDIR) -p $(JDK_IMAGE_DIR)
@$(call StartTimer)
ifeq ($(BUILD_LANGTOOLS), true)
generic_build_repo_series:: langtools
clobber:: langtools-clobber
endif
ifeq ($(BUILD_CORBA), true)
generic_build_repo_series:: corba
clobber:: corba-clobber
endif
ifeq ($(BUILD_JAXP), true)
generic_build_repo_series:: jaxp
clobber:: jaxp-clobber
endif
ifeq ($(BUILD_JAXWS), true)
generic_build_repo_series:: jaxws
clobber:: jaxws-clobber
endif
ifeq ($(BUILD_HOTSPOT), true)
generic_build_repo_series:: $(HOTSPOT)
clobber:: hotspot-clobber
endif
ifeq ($(BUILD_JDK), true)
generic_build_repo_series:: $(JDK_JAVA_EXE)
clobber:: jdk-clobber
endif
ifeq ($(BUILD_NASHORN), true)
generic_build_repo_series:: $(NASHORN)
clobber:: nashorn-clobber
endif
ifeq ($(BUILD_DEPLOY), true)
generic_build_repo_series:: $(DEPLOY)
clobber:: deploy-clobber
endif
generic_build_repo_series::
@$(call StopTimer,$(if $(DEBUG_NAME),$(DEBUG_NAME)_build,all_product_build))
# The debug build, fastdebug or debug. Needs special handling.
# Note that debug builds do NOT do INSTALL steps, but must be done
# after the product build and before the INSTALL step of the product build.
#
# DEBUG_NAME is fastdebug or debug
# ALT_OUTPUTDIR is changed to have -debug or -fastdebug suffix
# The resulting image directory (j2sdk-image) is used by the install makefiles
# to create a debug install bundle jdk-*-debug-** bundle (tar or zip)
# which will install in the debug or fastdebug subdirectory of the
# normal product install area.
# The install process needs to know what the DEBUG_NAME is, so
# look for INSTALL_DEBUG_NAME in the install rules.
#
# NOTE: On windows, do not use $(ABS_BOOTDIR_OUTPUTDIR)-$(DEBUG_NAME).
# Due to the use of short paths in $(ABS_OUTPUTDIR), this may
# not be the same location.
#
# Location of fresh bootdir output
ABS_BOOTDIR_OUTPUTDIR=$(ABS_OUTPUTDIR)/bootjdk
FRESH_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
FRESH_DEBUG_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(REL_JDK_IMAGE_DIR)
create_fresh_product_bootdir: FRC
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_SETTINGS= \
build_product_image
create_fresh_debug_bootdir: FRC
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_DEBUG_SETTINGS= \
build_debug_image
create_fresh_fastdebug_bootdir: FRC
$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
GENERATE_DOCS=false \
BOOT_CYCLE_DEBUG_SETTINGS= \
build_fastdebug_image
# Create boot image?
ifeq ($(SKIP_BOOT_CYCLE),false)
ifneq ($(PLATFORM)$(ARCH_DATA_MODEL),solaris64)
DO_BOOT_CYCLE=true
endif
endif
ifeq ($(DO_BOOT_CYCLE),true)
# Create the bootdir to use in the build
product_build:: create_fresh_product_bootdir
debug_build:: create_fresh_debug_bootdir
fastdebug_build:: create_fresh_fastdebug_bootdir
# Define variables to be used now for the boot jdk
BOOT_CYCLE_SETTINGS= \
ALT_BOOTDIR=$(FRESH_BOOTDIR) \
ALT_JDK_IMPORT_PATH=$(FRESH_BOOTDIR)
BOOT_CYCLE_DEBUG_SETTINGS= \
ALT_BOOTDIR=$(FRESH_DEBUG_BOOTDIR) \
ALT_JDK_IMPORT_PATH=$(FRESH_DEBUG_BOOTDIR)
else
# Use the supplied ALT_BOOTDIR as the boot
BOOT_CYCLE_SETTINGS=
BOOT_CYCLE_DEBUG_SETTINGS=
endif
build_product_image:
$(MAKE) \
SKIP_FASTDEBUG_BUILD=true \
SKIP_DEBUG_BUILD=true \
$(BOOT_CYCLE_SETTINGS) \
generic_build_repo_series
# NOTE: On windows, do not use $(ABS_OUTPUTDIR)-$(DEBUG_NAME).
# Due to the use of short paths in $(ABS_OUTPUTDIR), this may
# not be the same location.
generic_debug_build:
$(MAKE) \
ALT_OUTPUTDIR=$(ABS_OUTPUTDIR)/$(REL_JDK_OUTPUTDIR) \
DEBUG_NAME=$(DEBUG_NAME) \
GENERATE_DOCS=false \
$(BOOT_CYCLE_DEBUG_SETTINGS) \
generic_build_repo_series
build_debug_image:
$(MAKE) DEBUG_NAME=debug generic_debug_build
build_fastdebug_image:
$(MAKE) DEBUG_NAME=fastdebug generic_debug_build
# Build final image
product_build:: build_product_image
debug_build:: build_debug_image
fastdebug_build:: build_fastdebug_image
# The source tips are stored with the relative path to the repo.
# This file will be used when constructing the jdk image.
source_tips: $(SOURCE_TIPS)
$(CAT) $<
$(SOURCE_TIPS): FRC
@$(prep-target)
@$(call GetSourceTips)
clobber:: REPORT_BUILD_TIMES=
clobber::
$(RM) -r $(OUTPUTDIR)/*
-($(RMDIR) -p $(OUTPUTDIR) > $(DEV_NULL) 2>&1; $(TRUE))
clean: clobber
#
# Dev builds
#
dev : dev-build
dev-build:
$(MAKE) DEV_ONLY=true all
dev-sanity:
$(MAKE) DEV_ONLY=true sanity
dev-clobber:
$(MAKE) DEV_ONLY=true clobber
#
# Quick jdk verification build
#
jdk_only:
$(MAKE) SKIP_FASTDEBUG_BUILD=true BUILD_HOTSPOT=false all
#
# Quick jdk verification fastdebug build
#
jdk_fastdebug_only:
$(MAKE) DEBUG_NAME=fastdebug BUILD_HOTSPOT=false BUILD_DEPLOY=false \
BUILD_INSTALL=false BUILD_SPONSORS=false generic_debug_build
#
# Quick deploy verification fastdebug build
#
deploy_fastdebug_only:
$(MAKE) \
DEBUG_NAME=fastdebug \
BUILD_HOTSPOT=false \
BUILD_JDK=false \
BUILD_LANGTOOLS=false \
BUILD_NASHORN=false \
BUILD_CORBA=false \
BUILD_JAXP=false \
BUILD_JAXWS=false \
BUILD_INSTALL=false \
BUILD_SPONSORS=false \
generic_debug_build
#
# Product build (skip debug builds)
#
product_only:
$(MAKE) SKIP_FASTDEBUG_BUILD=true all
#
# Check target
#
check: variable_check
#
# Help target
#
help: intro_help target_help variable_help notes_help examples_help
# Intro help message
intro_help:
@$(ECHO) "\
Makefile for the JDK builds (all the JDK). \n\
"
# Target help
target_help:
@$(ECHO) "\
--- Common Targets --- \n\
all -- build the core JDK (default target) \n\
help -- Print out help information \n\
check -- Check make variable values for correctness \n\
sanity -- Perform detailed sanity checks on system and settings \n\
fastdebug_build -- build the core JDK in 'fastdebug' mode (-g -O) \n\
debug_build -- build the core JDK in 'debug' mode (-g) \n\
clean -- remove all built and imported files \n\
clobber -- same as clean \n\
"
# Variable help (only common ones used by this Makefile)
variable_help: variable_help_intro variable_list variable_help_end
variable_help_intro:
@$(ECHO) "--- Common Variables ---"
variable_help_end:
@$(ECHO) " "
# One line descriptions for the variables
OUTPUTDIR.desc = Output directory
PARALLEL_COMPILE_JOBS.desc = Solaris/Linux parallel compile run count
SLASH_JAVA.desc = Root of all build tools, e.g. /java or J:
BOOTDIR.desc = JDK used to boot the build
JDK_IMPORT_PATH.desc = JDK used to import components of the build
COMPILER_PATH.desc = Compiler install directory
CACERTS_FILE.desc = Location of certificates file
DEVTOOLS_PATH.desc = Directory containing zip and gnumake
CUPS_HEADERS_PATH.desc = Include directory location for CUPS header files
DXSDK_PATH.desc = Root directory of DirectX SDK
# Make variables to print out (description and value)
VARIABLE_PRINTVAL_LIST += \
OUTPUTDIR \
PARALLEL_COMPILE_JOBS \
SLASH_JAVA \
BOOTDIR \
JDK_IMPORT_PATH \
COMPILER_PATH \
CACERTS_FILE \
DEVTOOLS_PATH
# Make variables that should refer to directories that exist
VARIABLE_CHECKDIR_LIST += \
SLASH_JAVA \
BOOTDIR \
JDK_IMPORT_PATH \
COMPILER_PATH \
DEVTOOLS_PATH
# Make variables that should refer to files that exist
VARIABLE_CHECKFIL_LIST += \
CACERTS_FILE
# Some are windows specific
ifeq ($(PLATFORM), windows)
VARIABLE_PRINTVAL_LIST += \
DXSDK_PATH
VARIABLE_CHECKDIR_LIST += \
DXSDK_PATH
endif
# For pattern rules below, so all are treated the same
DO_PRINTVAL_LIST=$(VARIABLE_PRINTVAL_LIST:%=%.printval)
DO_CHECKDIR_LIST=$(VARIABLE_CHECKDIR_LIST:%=%.checkdir)
DO_CHECKFIL_LIST=$(VARIABLE_CHECKFIL_LIST:%=%.checkfil)
# Complete variable check
variable_check: $(DO_CHECKDIR_LIST) $(DO_CHECKFIL_LIST)
variable_list: $(DO_PRINTVAL_LIST) variable_check
# Pattern rule for printing out a variable
%.printval:
@$(ECHO) " ALT_$* - $($*.desc)"
@$(ECHO) " \t $*=$($*)"
# Pattern rule for checking to see if a variable with a directory exists
%.checkdir:
@if [ ! -d $($*) ] ; then \
$(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \
fi
# Pattern rule for checking to see if a variable with a file exists
%.checkfil:
@if [ ! -f $($*) ] ; then \
$(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \
fi
# Misc notes on help
notes_help:
@$(ECHO) "\
--- Notes --- \n\
- All builds use same output directory unless overridden with \n\
\t ALT_OUTPUTDIR=<dir>, changing from product to fastdebug you may want \n\
\t to use the clean target first. \n\
- JDK_IMPORT_PATH must refer to a compatible build, not all past promoted \n\
\t builds or previous release JDK builds will work. \n\
- The fastest builds have been when the sources and the BOOTDIR are on \n\
\t local disk. \n\
"
examples_help:
@$(ECHO) "\
--- Examples --- \n\
$(MAKE) fastdebug_build \n\
$(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\
$(MAKE) ALT_OUTPUTDIR=/tmp/foobar fastdebug_build \n\
$(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\
$(MAKE) ALT_BOOTDIR=/opt/java/jdk1.5.0 \n\
$(MAKE) ALT_JDK_IMPORT_PATH=/opt/java/jdk1.6.0 \n\
"
################################################################
# Source bundling
################################################################
ifeq ($(BUNDLE_RULES_AVAILABLE), true)
include $(BUNDLE_RULES)
endif
################################################################
# rule to test
################################################################
.NOTPARALLEL: test_run
test:
$(MAKE) test_run
test_run: test_clean test_start test_summary
test_start:
@$(ECHO) "Tests started at `$(DATE)`"
test_clean:
$(RM) $(OUTPUTDIR)/test_failures.txt $(OUTPUTDIR)/test_log.txt
test_summary: $(OUTPUTDIR)/test_failures.txt
@$(ECHO) "#################################################"
@$(ECHO) "Tests completed at `$(DATE)`"
@( $(EGREP) '^TEST STATS:' $(OUTPUTDIR)/test_log.txt \
|| $(ECHO) "No TEST STATS seen in log" )
@$(ECHO) "For complete details see: $(OUTPUTDIR)/test_log.txt"
@$(ECHO) "#################################################"
@if [ -s $< ] ; then \
$(ECHO) "ERROR: Test failure count: `$(CAT) $< | $(WC) -l`"; \
$(CAT) $<; \
exit 1; \
else \
$(ECHO) "Success! No failures detected"; \
fi
# Get failure list from log
$(OUTPUTDIR)/test_failures.txt: $(OUTPUTDIR)/test_log.txt
@$(RM) $@
@( $(EGREP) '^FAILED:' $< || $(ECHO) "" ) | $(NAWK) 'length>0' > $@
# Get log file of all tests run
JDK_TO_TEST := $(shell \
if [ -d "$(ABS_JDK_IMAGE_DIR)" ] ; then \
$(ECHO) "$(ABS_JDK_IMAGE_DIR)"; \
elif [ -d "$(ABS_OUTPUTDIR)/bin" ] ; then \
$(ECHO) "$(ABS_OUTPUTDIR)"; \
elif [ "$(PRODUCT_HOME)" != "" -a -d "$(PRODUCT_HOME)/bin" ] ; then \
$(ECHO) "$(PRODUCT_HOME)"; \
fi \
)
TEST_TARGETS=all
$(OUTPUTDIR)/test_log.txt:
$(RM) $@
( $(CD) test && \
$(MAKE) NO_STOPPING=- PRODUCT_HOME=$(JDK_TO_TEST) $(TEST_TARGETS) \
) | tee $@
################################################################
# JPRT rule to build
################################################################
include ./make/jprt.gmk
################################################################
# PHONY
################################################################
.PHONY: all test test_run test_start test_summary test_clean \
generic_build_repo_series \
what clobber insane \
dev dev-build dev-sanity dev-clobber \
product_build \
fastdebug_build \
debug_build \
build_product_image \
build_debug_image \
build_fastdebug_image \
create_fresh_product_bootdir \
create_fresh_debug_bootdir \
create_fresh_fastdebug_bootdir \
generic_debug_build
# Force target
FRC:
endif # Original Makefile logic