8180724: move ModuleInfoMaker to the top level testlibrary
Reviewed-by: psandoz, mchung
## Copyright (c) 2013, 2016, Oracle and/or its affiliates. All rights reserved.# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.## This code is free software; you can redistribute it and/or modify it# under the terms of the GNU General Public License version 2 only, as# published by the Free Software Foundation. Oracle designates this# particular file as subject to the "Classpath" exception as provided# by Oracle in the LICENSE file that accompanied this code.## This code is distributed in the hope that it will be useful, but WITHOUT# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License# version 2 for more details (a copy is included in the LICENSE file that# accompanied this code).## You should have received a copy of the GNU General Public License version# 2 along with this work; if not, write to the Free Software Foundation,# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.## Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA# or visit www.oracle.com if you need additional information or have any# questions.############################################################################################# Workhorse makefile for creating ONE cross compiler# Needs either to be from BUILD -> BUILD OR have# BUILD -> HOST prebuilt## NOTE: There is a bug here. We don't limit the# PATH when building BUILD -> BUILD, which means that# if you configure after you've once build the BUILD->BUILD# compiler THAT one will be picked up as the compiler for itself.# This is not so great, especially if you did a partial delete# of the target tree.## Fix this...#$(info TARGET=$(TARGET))$(info HOST=$(HOST))$(info BUILD=$(BUILD))ARCH := $(word 1,$(subst -, ,$(TARGET)))########################################################################################### Define external dependencies# Latest that could be made to work.gcc_ver := gcc-4.9.2binutils_ver := binutils-2.25ccache_ver := ccache-3.2.1mpfr_ver := mpfr-3.0.1gmp_ver := gmp-4.3.2mpc_ver := mpc-1.0.1GCC := http://ftp.gnu.org/pub/gnu/gcc/$(gcc_ver)/$(gcc_ver).tar.bz2BINUTILS := http://ftp.gnu.org/pub/gnu/binutils/$(binutils_ver).tar.bz2CCACHE := http://samba.org/ftp/ccache/$(ccache_ver).tar.gzMPFR := http://www.mpfr.org/${mpfr_ver}/${mpfr_ver}.tar.bz2GMP := http://ftp.gnu.org/pub/gnu/gmp/${gmp_ver}.tar.bz2MPC := http://www.multiprecision.org/mpc/download/${mpc_ver}.tar.gz# RPMs in OEL6.4LINUX_VERSION := OEL6.4RPM_LIST := \ kernel-headers \ glibc glibc-headers glibc-devel \ cups-libs cups-devel \ libX11 libX11-devel \ xorg-x11-proto-devel \ alsa-lib alsa-lib-devel \ libXext libXext-devel \ libXtst libXtst-devel \ libXrender libXrender-devel \ freetype freetype-devel \ libXt libXt-devel \ libSM libSM-devel \ libICE libICE-devel \ libXi libXi-devel \ libXdmcp libXdmcp-devel \ libXau libXau-devel \ libgcc \ elfutils elfutils-libs elfutils-devel \ elfutils-libelf elfutils-libelf-devel \ zlib zlib-devel \ libffi libffi-develifeq ($(ARCH),x86_64) RPM_DIR ?= $(RPM_DIR_x86_64) RPM_ARCHS := x86_64 noarch ifeq ($(BUILD),$(HOST)) ifeq ($(TARGET),$(HOST)) # When building the native compiler for x86_64, enable mixed mode. RPM_ARCHS += i386 i686 endif endifelse RPM_DIR ?= $(RPM_DIR_i686) RPM_ARCHS := i386 i686endif# Sort to remove duplicatesRPM_FILE_LIST := $(sort $(foreach a,$(RPM_ARCHS),$(wildcard $(patsubst %,$(RPM_DIR)/%*$a.rpm,$(RPM_LIST)))))#$(info RPM_FILE_LIST $(RPM_FILE_LIST))ifeq ($(RPM_FILE_LIST),) $(error Found no RPMs, RPM_DIR must point to list of directories to search for RPMs)endif########################################################################################### Define common directories and files# Ensure we have 32-bit libs also for x64. We enable mixed-mode.ifeq (x86_64,$(ARCH)) LIBDIRS := lib64 lib CFLAGS_lib := -m32else LIBDIRS := libendif# Define directoriesRESULT := $(OUTPUT_ROOT)/resultBUILDDIR := $(OUTPUT_ROOT)/$(HOST)/$(TARGET)PREFIX := $(RESULT)/$(HOST)TARGETDIR := $(PREFIX)/$(TARGET)SYSROOT := $(TARGETDIR)/sysrootDOWNLOAD := $(OUTPUT_ROOT)/downloadSRCDIR := $(OUTPUT_ROOT)/src# Marker file for unpacking rpmsrpms := $(SYSROOT)/rpms_unpacked# Need to patch libs that are linker scripts to use non-absolute pathslibs := $(SYSROOT)/libs_patched########################################################################################### Unpack source packages# Generate downloading + unpacking of sources.define Download $(1)_DIR = $(abspath $(SRCDIR)/$(basename $(basename $(notdir $($(1)))))) $(1)_CFG = $$($(1)_DIR)/configure $(1)_FILE = $(DOWNLOAD)/$(notdir $($(1))) $$($(1)_CFG) : $$($(1)_FILE) mkdir -p $$(SRCDIR) tar -C $$(SRCDIR) -x$$(if $$(findstring .gz, $$<),z,j)f $$< $$(foreach p,$$(abspath $$(wildcard $$(notdir $$($(1)_DIR)).patch)), \ echo PATCHING $$(p) ; \ patch -d $$($(1)_DIR) -p1 -i $$(p) ; \ ) touch $$@ $$($(1)_FILE) : wget -P $(DOWNLOAD) $$($(1))endef# Download and unpack all source packages$(foreach p,GCC BINUTILS CCACHE MPFR GMP MPC,$(eval $(call Download,$(p))))########################################################################################### Unpack RPMS# Note. For building linux you should install rpm2cpio.define unrpm $(SYSROOT)/$(notdir $(1)).unpacked \ : $(1) $$(rpms) : $(SYSROOT)/$(notdir $(1)).unpackedendef%.unpacked : $(info Unpacking target rpms and libraries from $<) @(mkdir -p $(@D); \ cd $(@D); \ rpm2cpio $< | \ cpio --extract --make-directories \ -f \ "./usr/share/doc/*" \ "./usr/share/man/*" \ "./usr/X11R6/man/*" \ "*/X11/locale/*" \ || die ; ) touch $@$(foreach p,$(RPM_FILE_LIST),$(eval $(call unrpm,$(p))))########################################################################################### Note: MUST create a <sysroot>/usr/lib even if not really needed.# gcc will use a path relative to it to resolve lib64. (x86_64).# we're creating multi-lib compiler with 32bit libc as well, so we should# have it anyway, but just to make sure...# Patch libc.so and libpthread.so to force linking against libraries in sysroot# and not the ones installed on the build machine.$(libs) : $(rpms) @echo Patching libc and pthreads @(for f in `find $(SYSROOT) -name libc.so -o -name libpthread.so`; do \ (cat $$f | sed -e 's|/usr/lib64/||g' \ -e 's|/usr/lib/||g' \ -e 's|/lib64/||g' \ -e 's|/lib/||g' ) > $$f.tmp ; \ mv $$f.tmp $$f ; \ done) @mkdir -p $(SYSROOT)/usr/lib @touch $@########################################################################################### Create links for ffi header files so that they become visible by default when using the# devkit.$(SYSROOT)/usr/include/ffi.h: $(rpms) cd $(@D) && rm $(@F) && ln -s ../lib/libffi-*/include/$(@F) .$(SYSROOT)/usr/include/ffitarget.h: $(rpms) cd $(@D) && rm $(@F) && ln -s ../lib/libffi-*/include/$(@F) .SYSROOT_LINKS += $(SYSROOT)/usr/include/ffi.h $(SYSROOT)/usr/include/ffitarget.h########################################################################################### Define marker files for each source package to be compiled$(foreach t,binutils mpfr gmp mpc gcc ccache,$(eval $(t) = $(TARGETDIR)/$($(t)_ver).done))########################################################################################### Default base configCONFIG = --target=$(TARGET) \ --host=$(HOST) --build=$(BUILD) \ --prefix=$(PREFIX)PATHEXT = $(RESULT)/$(BUILD)/bin:PATHPRE = PATH=$(PATHEXT)$(PATH)BUILDPAR = -j16# Default commands to when makingMAKECMD =INSTALLCMD = installdeclare_tools = CC$(1)=$(2)gcc LD$(1)=$(2)ld AR$(1)=$(2)ar AS$(1)=$(2)as RANLIB$(1)=$(2)ranlib CXX$(1)=$(2)g++ OBJDUMP$(1)=$(2)objdumpifeq ($(HOST),$(BUILD)) ifeq ($(HOST),$(TARGET)) TOOLS = $(call declare_tools,_FOR_TARGET,) endifendifTOOLS ?= $(call declare_tools,_FOR_TARGET,$(TARGET)-)########################################################################################### Create a TARGET bfd + libiberty only.# Configure one or two times depending on mulitlib arch.# If multilib, the second should be 32-bit, and we resolve# CFLAG_<name> to most likely -m32.define mk_bfd $$(info Libs for $(1)) $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \ : CFLAGS += $$(CFLAGS_$(1)) $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \ : LIBDIRS = --libdir=$(TARGETDIR)/$(1) bfdlib += $$(TARGETDIR)/$$(binutils_ver)-$(subst /,-,$(1)).done bfdmakes += $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefileendef# Create one set of bfds etc for each multilib arch$(foreach l,$(LIBDIRS),$(eval $(call mk_bfd,$(l))))# Only build these two libs.$(bfdlib) : MAKECMD = all-libiberty all-bfd$(bfdlib) : INSTALLCMD = install-libiberty install-bfd# Building targets libbfd + libiberty. HOST==TARGET, i.e not# for a cross env.$(bfdmakes) : CONFIG = --target=$(TARGET) \ --host=$(TARGET) --build=$(BUILD) \ --prefix=$(TARGETDIR) \ --with-sysroot=$(SYSROOT) \ $(LIBDIRS)$(bfdmakes) : TOOLS = $(call declare_tools,_FOR_TARGET,$(TARGET)-) $(call declare_tools,,$(TARGET)-)##########################################################################################$(gcc) \ $(binutils) \ $(gmp) \ $(mpfr) \ $(mpc) \ $(bfdmakes) \ $(ccache) : ENVS += $(TOOLS)# libdir to work around hateful bfd stuff installing into wrong dirs...# ensure we have 64 bit bfd support in the HOST library. I.e our# compiler on i686 will know 64 bit symbols, BUT later# we build just the libs again for TARGET, then with whatever the arch# wants.$(BUILDDIR)/$(binutils_ver)/Makefile : CONFIG += --enable-64-bit-bfd --libdir=$(PREFIX)/$(word 1,$(LIBDIRS))# Makefile creation. Simply run configure in build dir.$(bfdmakes) \$(BUILDDIR)/$(binutils_ver)/Makefile \ : $(BINUTILS_CFG) $(info Configuring $@. Log in $(@D)/log.config) @mkdir -p $(@D) ( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \ $(BINUTILS_CFG) \ $(CONFIG) \ --with-sysroot=$(SYSROOT) \ --disable-nls \ --program-prefix=$(TARGET)- \ --enable-multilib \ ) > $(@D)/log.config 2>&1 @echo 'done'$(BUILDDIR)/$(mpfr_ver)/Makefile \ : $(MPFR_CFG) $(info Configuring $@. Log in $(@D)/log.config) @mkdir -p $(@D) ( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \ $(MPFR_CFG) \ $(CONFIG) \ --program-prefix=$(TARGET)- \ --enable-shared=no \ --with-gmp=$(PREFIX) \ ) > $(@D)/log.config 2>&1 @echo 'done'$(BUILDDIR)/$(gmp_ver)/Makefile \ : $(GMP_CFG) $(info Configuring $@. Log in $(@D)/log.config) @mkdir -p $(@D) ( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \ $(GMP_CFG) \ --host=$(HOST) --build=$(BUILD) \ --prefix=$(PREFIX) \ --disable-nls \ --program-prefix=$(TARGET)- \ --enable-shared=no \ --with-mpfr=$(PREFIX) \ ) > $(@D)/log.config 2>&1 @echo 'done'$(BUILDDIR)/$(mpc_ver)/Makefile \ : $(MPC_CFG) $(info Configuring $@. Log in $(@D)/log.config) @mkdir -p $(@D) ( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \ $(MPC_CFG) \ $(CONFIG) \ --program-prefix=$(TARGET)- \ --enable-shared=no \ --with-mpfr=$(PREFIX) \ --with-gmp=$(PREFIX) \ ) > $(@D)/log.config 2>&1 @echo 'done'# Only valid if glibc target -> linux# proper destructor handling for c++ifneq (,$(findstring linux,$(TARGET))) $(BUILDDIR)/$(gcc_ver)/Makefile : CONFIG += --enable-__cxa_atexitendif# Want:# c,c++# shared libs# multilib (-m32/-m64 on x64)# skip native language.# and link and assemble with the binutils we created# earlier, so --with-gnu*$(BUILDDIR)/$(gcc_ver)/Makefile \ : $(GCC_CFG) $(info Configuring $@. Log in $(@D)/log.config) mkdir -p $(@D) ( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) $(GCC_CFG) $(EXTRA_CFLAGS) \ $(CONFIG) \ --with-sysroot=$(SYSROOT) \ --enable-languages=c,c++ \ --enable-shared \ --enable-multilib \ --disable-nls \ --with-gnu-as \ --with-gnu-ld \ --with-mpfr=$(PREFIX) \ --with-gmp=$(PREFIX) \ --with-mpc=$(PREFIX) \ ) > $(@D)/log.config 2>&1 @echo 'done'# need binutils for gcc$(gcc) : $(binutils)# as of 4.3 or so need these for doing config$(BUILDDIR)/$(gcc_ver)/Makefile : $(gmp) $(mpfr) $(mpc)$(mpfr) : $(gmp)$(mpc) : $(gmp) $(mpfr)########################################################################################### very straightforward. just build a ccache. it is only for host.$(BUILDDIR)/$(ccache_ver)/Makefile \ : $(CCACHE_CFG) $(info Configuring $@. Log in $(@D)/log.config) @mkdir -p $(@D) @( \ cd $(@D) ; \ $(PATHPRE) $(ENVS) $(CCACHE_CFG) \ $(CONFIG) \ ) > $(@D)/log.config 2>&1 @echo 'done'gccpatch = $(TARGETDIR)/gcc-patched########################################################################################### For some reason cpp is not created as a target-compilerifeq ($(HOST),$(TARGET)) $(gccpatch) : $(gcc) link_libs @echo -n 'Creating compiler symlinks...' @for f in cpp; do \ if [ ! -e $(PREFIX)/bin/$(TARGET)-$$f ]; \ then \ cd $(PREFIX)/bin && \ ln -s $$f $(TARGET)-$$f ; \ fi \ done @touch $@ @echo 'done' ########################################################################################## # Ugly at best. Seems that when we compile host->host compiler, that are NOT # the BUILD compiler, the result will not try searching for libs in package root. # "Solve" this by create links from the target libdirs to where they are. link_libs: @echo -n 'Creating library symlinks...' @$(foreach l,$(LIBDIRS), \ for f in `cd $(PREFIX)/$(l) && ls`; do \ if [ ! -e $(TARGETDIR)/$(l)/$$f ]; then \ mkdir -p $(TARGETDIR)/$(l) && \ cd $(TARGETDIR)/$(l)/ && \ ln -s $(if $(findstring /,$(l)),../,)../../$(l)/$$f $$f; \ fi \ done;) @echo 'done'else $(gccpatch) : @echo 'done'endif########################################################################################### Build in two steps.# make <default># make install.# Use path to our build hosts cross tools# Always need to build cross tools for build host self.$(TARGETDIR)/%.done : $(BUILDDIR)/%/Makefile $(info Building $(basename $@). Log in $(<D)/log.build) $(PATHPRE) $(ENVS) $(MAKE) $(BUILDPAR) -f $< -C $(<D) $(MAKECMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.build 2>&1 @echo -n 'installing...' $(PATHPRE) $(MAKE) $(INSTALLPAR) -f $< -C $(<D) $(INSTALLCMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.install 2>&1 @touch $@ @echo 'done'##########################################################################################$(PREFIX)/devkit.info: FRC @echo 'Creating devkit.info in the root of the kit' rm -f $@ touch $@ echo '# This file describes to configure how to interpret the contents of this' >> $@ echo '# devkit' >> $@ echo '' >> $@ echo 'DEVKIT_NAME="$(gcc_ver) - $(LINUX_VERSION)"' >> $@ echo 'DEVKIT_TOOLCHAIN_PATH="$$DEVKIT_ROOT/bin"' >> $@ echo 'DEVKIT_SYSROOT="$$DEVKIT_ROOT/$$host/sysroot"' >> $@##########################################################################################ifeq ($(TARGET), $(HOST)) $(PREFIX)/bin/%: @echo 'Creating missing $* soft link' ln -s $(TARGET)-$* $@ missing-links := $(addprefix $(PREFIX)/bin/, \ addr2line ar as c++ c++filt elfedit g++ gcc gprof ld nm objcopy ranlib readelf \ size strings strip)endif##########################################################################################bfdlib : $(bfdlib)binutils : $(binutils)rpms : $(rpms)libs : $(libs)sysroot : rpms libsgcc : sysroot $(gcc) $(gccpatch)all : binutils gcc bfdlib $(PREFIX)/devkit.info $(missing-links) $(SYSROOT_LINKS)# this is only built for host. so separate.ccache : $(ccache)# Force targetFRC:.PHONY : gcc all binutils bfdlib link_libs rpms libs sysroot