author | roland |
Fri, 29 May 2015 16:09:16 +0200 | |
changeset 31048 | ad1dfe0256a7 |
parent 30595 | 1416b16e7f55 |
child 33588 | 13edf132ffa0 |
permissions | -rw-r--r-- |
# # Copyright (c) 1995, 2015, Oracle and/or its affiliates. All rights reserved. # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. # # This code is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License version 2 only, as # published by the Free Software Foundation. # # This code is distributed in the hope that it will be useful, but WITHOUT # ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or # FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License # version 2 for more details (a copy is included in the LICENSE file that # accompanied this code). # # You should have received a copy of the GNU General Public License version # 2 along with this work; if not, write to the Free Software Foundation, # Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. # # Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA # or visit www.oracle.com if you need additional information or have any # questions. # # # # Makefile to run various hotspot tests # ALT_MAKE ?= closed GETMIXEDPATH=echo # Utilities used AWK = awk CAT = cat CD = cd CHMOD = chmod CP = cp CUT = cut DIRNAME = dirname ECHO = echo EGREP = egrep EXPAND = expand FIND = find MKDIR = mkdir PWD = pwd SED = sed SORT = sort TEE = tee UNAME = uname UNIQ = uniq WC = wc ZIP = zip # Get OS name from uname (Cygwin inexplicably adds _NT-5.1) UNAME_S := $(shell $(UNAME) -s | $(CUT) -f1 -d_) ifeq ($(UNAME_S), SunOS) PLATFORM = solaris SLASH_JAVA = /java ARCH = $(shell uname -p) ifeq ($(ARCH), i386) ARCH=i586 endif endif ifeq ($(UNAME_S), Linux) PLATFORM = linux SLASH_JAVA = /java ARCH = $(shell uname -m) ifeq ($(ARCH), i386) ARCH = i586 endif endif ifeq ($(UNAME_S), Darwin) PLATFORM = bsd SLASH_JAVA = /java ARCH = $(shell uname -m) ifeq ($(ARCH), i386) ARCH = i586 endif endif ifeq ($(findstring BSD,$(UNAME_S)), BSD) PLATFORM = bsd SLASH_JAVA = /java ARCH = $(shell uname -m) ifeq ($(ARCH), i386) ARCH = i586 endif endif ifeq ($(PLATFORM),) # detect whether we're running in MKS or cygwin ifeq ($(UNAME_S), Windows_NT) # MKS GETMIXEDPATH=dosname -s endif ifeq ($(findstring CYGWIN,$(UNAME_S)), CYGWIN) GETMIXEDPATH=cygpath -m endif PLATFORM = windows SLASH_JAVA = J: ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),ia64) ARCH = ia64 else ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),AMD64) ARCH = x64 else ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),EM64T) ARCH = x64 else ARCH = i586 endif endif endif EXESUFFIX = .exe endif ifdef ALT_SLASH_JAVA SLASH_JAVA = $(ALT_SLASH_JAVA) endif # Root of this test area (important to use full paths in some places) TEST_ROOT := $(shell pwd) # Root of all test results ifdef ALT_OUTPUTDIR ABS_BUILD_ROOT = $(ALT_OUTPUTDIR)/$(PLATFORM)-$(ARCH) else ABS_BUILD_ROOT = $(TEST_ROOT)/../build/$(PLATFORM)-$(ARCH) endif ABS_TEST_OUTPUT_DIR = $(ABS_BUILD_ROOT)/testoutput # Expect JPRT to set PRODUCT_HOME (the product or jdk in this case to test) ifndef PRODUCT_HOME # Try to use j2sdk-image if it exists ABS_JDK_IMAGE = $(ABS_BUILD_ROOT)/j2sdk-image PRODUCT_HOME := \ $(shell \ if [ -d $(ABS_JDK_IMAGE) ] ; then \ $(ECHO) "$(ABS_JDK_IMAGE)"; \ else \ $(ECHO) "$(ABS_BUILD_ROOT)" ; \ fi) endif # Expect JPRT to set JAVA_ARGS (e.g. -server etc.) JAVA_OPTIONS = ifdef JAVA_ARGS JAVA_OPTIONS = $(JAVA_ARGS) endif # jtreg -nativepath <dir> # # Local make tests will be TEST_IMAGE_DIR and JPRT with jprt.use.reg.test.bundle=true # should be JPRT_TESTNATIVE_PATH ifdef TEST_IMAGE_DIR TESTNATIVE_DIR = $(TEST_IMAGE_DIR) else ifdef JPRT_TESTNATIVE_PATH TESTNATIVE_DIR = $(JPRT_TESTNATIVE_PATH) endif ifdef TESTNATIVE_DIR JTREG_NATIVE_PATH = -nativepath:$(shell $(GETMIXEDPATH) "$(TESTNATIVE_DIR)/hotspot/jtreg/native") endif # Expect JPRT to set JPRT_ARCHIVE_BUNDLE (path to zip bundle for results) ARCHIVE_BUNDLE = $(ABS_TEST_OUTPUT_DIR)/ARCHIVE_BUNDLE.zip ifdef JPRT_ARCHIVE_BUNDLE ARCHIVE_BUNDLE = $(JPRT_ARCHIVE_BUNDLE) endif # How to create the test bundle (pass or fail, we want to create this) # Follow command with ";$(BUNDLE_UP_AND_EXIT)", so it always gets executed. ZIP_UP_RESULTS = ( $(MKDIR) -p `$(DIRNAME) $(ARCHIVE_BUNDLE)` \ && $(CD) $(ABS_TEST_OUTPUT_DIR) \ && $(CHMOD) -R a+r . \ && $(ZIP) -q -r $(ARCHIVE_BUNDLE) . ) # important results files SUMMARY_TXT = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTreport/text/summary.txt") STATS_TXT_NAME = Stats.txt STATS_TXT = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/$(STATS_TXT_NAME)") RUNLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/runlist.txt") PASSLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/passlist.txt") FAILLIST = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/faillist.txt") EXITCODE = $(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/exitcode.txt") TESTEXIT = \ if [ ! -s $(EXITCODE) ] ; then \ $(ECHO) "ERROR: EXITCODE file not filled in."; \ $(ECHO) "1" > $(EXITCODE); \ fi ; \ testExitCode=`$(CAT) $(EXITCODE)`; \ $(ECHO) "EXIT CODE: $${testExitCode}"; \ exit $${testExitCode} BUNDLE_UP_AND_EXIT = \ ( \ jtregExitCode=$$? && \ _summary="$(SUMMARY_TXT)"; \ $(RM) -f $(STATS_TXT) $(RUNLIST) $(PASSLIST) $(FAILLIST) $(EXITCODE); \ $(ECHO) "$${jtregExitCode}" > $(EXITCODE); \ if [ -r "$${_summary}" ] ; then \ $(ECHO) "Summary: $(UNIQUE_DIR)" > $(STATS_TXT); \ $(EXPAND) $${_summary} | $(EGREP) -v ' Not run\.' > $(RUNLIST); \ $(EGREP) ' Passed\.' $(RUNLIST) \ | $(EGREP) -v ' Error\.' \ | $(EGREP) -v ' Failed\.' > $(PASSLIST); \ ( $(EGREP) ' Failed\.' $(RUNLIST); \ $(EGREP) ' Error\.' $(RUNLIST); \ $(EGREP) -v ' Passed\.' $(RUNLIST) ) \ | $(SORT) | $(UNIQ) > $(FAILLIST); \ if [ $${jtregExitCode} != 0 -o -s $(FAILLIST) ] ; then \ $(EXPAND) $(FAILLIST) \ | $(CUT) -d' ' -f1 \ | $(SED) -e 's@^@FAILED: @' >> $(STATS_TXT); \ if [ $${jtregExitCode} = 0 ] ; then \ jtregExitCode=1; \ fi; \ fi; \ runc="`$(CAT) $(RUNLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \ passc="`$(CAT) $(PASSLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \ failc="`$(CAT) $(FAILLIST) | $(WC) -l | $(AWK) '{print $$1;}'`"; \ exclc="FIXME CODETOOLS-7900176"; \ $(ECHO) "TEST STATS: name=$(UNIQUE_DIR) run=$${runc} pass=$${passc} fail=$${failc}" \ >> $(STATS_TXT); \ else \ $(ECHO) "Missing file: $${_summary}" >> $(STATS_TXT); \ fi; \ if [ -f $(STATS_TXT) ] ; then \ $(CAT) $(STATS_TXT); \ fi; \ $(ZIP_UP_RESULTS) ; \ $(TESTEXIT) \ ) ################################################################ # Default make rule (runs jtreg_tests) all: hotspot_all @$(ECHO) "Testing completed successfully" # Support "hotspot_" prefixed test make targets (too) # The hotspot_% targets are used by the top level Makefile # Unless explicitly defined below, hotspot_<x> is interpreted as a jtreg test group name hotspot_%: $(ECHO) "Running tests: $@" $(MAKE) -j 1 TEST_SELECTION=":$@" UNIQUE_DIR=$@ jtreg_tests; # Prep for output prep: clean @$(MKDIR) -p $(ABS_TEST_OUTPUT_DIR) @$(MKDIR) -p `dirname $(ARCHIVE_BUNDLE)` # Cleanup clean: $(RM) -r $(ABS_TEST_OUTPUT_DIR) $(RM) $(ARCHIVE_BUNDLE) ################################################################ # jtreg tests # Expect JT_HOME to be set for jtreg tests. (home for jtreg) ifndef JT_HOME JT_HOME = $(SLASH_JAVA)/re/jtreg/4.1/promoted/latest/binaries/jtreg ifdef JPRT_JTREG_HOME JT_HOME = $(JPRT_JTREG_HOME) endif endif # When called from JPRT the TESTDIRS variable is set to the jtreg tests to run ifdef TESTDIRS TEST_SELECTION = $(TESTDIRS) endif ifdef CONCURRENCY EXTRA_JTREG_OPTIONS += -concurrency:$(CONCURRENCY) endif # Default JTREG to run JTREG = $(JT_HOME)/bin/jtreg # Use agent mode JTREG_BASIC_OPTIONS += -agentvm # Only run automatic tests JTREG_BASIC_OPTIONS += -a # Report details on all failed or error tests, times too JTREG_BASIC_OPTIONS += -v:fail,error,time # Retain all files for failing tests JTREG_BASIC_OPTIONS += -retain:fail,error # Ignore tests are not run and completely silent about it JTREG_IGNORE_OPTION = -ignore:quiet JTREG_BASIC_OPTIONS += $(JTREG_IGNORE_OPTION) # Multiply by 4 the timeout factor JTREG_TIMEOUT_OPTION = -timeoutFactor:4 JTREG_BASIC_OPTIONS += $(JTREG_TIMEOUT_OPTION) # Add any extra options JTREG_BASIC_OPTIONS += $(EXTRA_JTREG_OPTIONS) # Set other vm and test options JTREG_TEST_OPTIONS = $(JAVA_ARGS:%=-javaoptions:%) $(JAVA_OPTIONS:%=-vmoption:%) $(JAVA_VM_ARGS:%=-vmoption:%) # Option to tell jtreg to not run tests marked with "ignore" ifeq ($(PLATFORM), windows) JTREG_KEY_OPTION = -k:!ignore else JTREG_KEY_OPTION = -k:\!ignore endif JTREG_BASIC_OPTIONS += $(JTREG_KEY_OPTION) -include $(ALT_MAKE)/Makefile # Make sure jtreg exists $(JTREG): $(JT_HOME) jtreg_tests: prep $(PRODUCT_HOME) $(JTREG) ( \ ( JT_HOME=$(shell $(GETMIXEDPATH) "$(JT_HOME)"); \ export JT_HOME; \ $(shell $(GETMIXEDPATH) "$(JTREG)") \ $(JTREG_BASIC_OPTIONS) \ -r:$(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTreport") \ -w:$(shell $(GETMIXEDPATH) "$(ABS_TEST_OUTPUT_DIR)/JTwork") \ -jdk:$(shell $(GETMIXEDPATH) "$(PRODUCT_HOME)") \ $(JTREG_NATIVE_PATH) \ $(JTREG_EXCLUSIONS) \ $(JTREG_TEST_OPTIONS) \ $(TEST_SELECTION) \ ) ; \ $(BUNDLE_UP_AND_EXIT) \ ) 2>&1 | $(TEE) $(ABS_TEST_OUTPUT_DIR)/output.txt ; $(TESTEXIT) PHONY_LIST += jtreg_tests # flags used to execute java in test targets TEST_FLAGS += -version -Xinternalversion -X -help sanitytest: prep $(PRODUCT_HOME) @for flag in $(TEST_FLAGS); \ do \ echo Executing java $(JAVA_OPTIONS) $$flag; \ $(PRODUCT_HOME)/bin/java $(JAVA_OPTIONS) $$flag; \ res=$$?; \ if [ $$res -ne 0 ]; then \ exit $$res; \ fi; \ done PHONY_LIST += sanitytest ################################################################ # basicvmtest (make sure various basic java options work) # Set up the directory in which the jvm directories live (client/, server/, etc.) ifeq ($(PLATFORM),windows) JVMS_DIR := $(PRODUCT_HOME)/bin else ifeq ($(PLATFORM),bsd) JVMS_DIR := $(PRODUCT_HOME)/lib else # The jvms live in the architecture directory (amd64, sparcv9, # etc.). By using a wildcard there's no need to figure out the exact # name of that directory. JVMS_DIR := $(PRODUCT_HOME)/lib/* endif # Use the existance of a directory as a sign that jvm variant is available CANDIDATE_JVM_VARIANTS := client minimal server JVM_VARIANTS := $(strip $(foreach x,$(CANDIDATE_JVM_VARIANTS),$(if $(wildcard $(JVMS_DIR)/$(x)),$(x)))) hotspot_basicvmtest: for variant in $(JVM_VARIANTS); \ do \ $(MAKE) JAVA_ARGS="$(JAVA_ARGS) -$$variant" hotspot_$${variant}test; \ res=$$?; \ if [ $$res -ne 0 ]; then \ exit $$res; \ fi; \ done PHONY_LIST += hotspot_basicvmtest ################################################################ # clienttest (make sure various basic java client options work) hotspot_clienttest clienttest: sanitytest $(RM) $(PRODUCT_HOME)/jre/lib/*/client/classes.jsa $(RM) $(PRODUCT_HOME)/jre/bin/client/classes.jsa $(PRODUCT_HOME)/bin/java $(JAVA_OPTIONS) -Xshare:dump PHONY_LIST += hotspot_clienttest clienttest ################################################################ # minimaltest (make sure various basic java minimal options work) hotspot_minimaltest minimaltest: sanitytest PHONY_LIST += hotspot_minimaltest minimaltest ################################################################ # servertest (make sure various basic java server options work) hotspot_servertest servertest: sanitytest PHONY_LIST += hotspot_servertest servertest ################################################################ # Phony targets (e.g. these are not filenames) .PHONY: all clean prep $(PHONY_LIST) ################################################################