8230794: Improve assert to get more information about the JDK-8227695 failure
Reviewed-by: kbarrett, sjohanss
#
# Copyright (c) 2011, 2019, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
################################################################################
# This is the main makefile containing most actual top level targets. It needs
# to be called with a SPEC file defined.
################################################################################
# Declare default target
default:
ifeq ($(wildcard $(SPEC)),)
$(error Main.gmk needs SPEC set to a proper spec.gmk)
endif
# Now load the spec
include $(SPEC)
include $(TOPDIR)/make/MainSupport.gmk
# Load the vital tools for all the makefiles.
include $(TOPDIR)/make/common/MakeBase.gmk
include $(TOPDIR)/make/common/Modules.gmk
include $(TOPDIR)/make/common/FindTests.gmk
# Declare ALL_TARGETS as an immediate variable. This variable is a list of all
# valid top level targets. It's used to declare them all as PHONY and to
# generate the -only targets.
ALL_TARGETS :=
# Hook to include the corresponding custom file, if present.
$(eval $(call IncludeCustomExtension, Main.gmk))
# All modules for the current target platform.
ALL_MODULES := $(call FindAllModules)
################################################################################
################################################################################
#
# Recipes for all targets. Only recipes, dependencies are declared later.
#
################################################################################
################################################################################
# Interim/build tools targets, compiling tools used during the build
buildtools-langtools:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f ToolsLangtools.gmk)
interim-langtools:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileInterimLangtools.gmk)
interim-rmic:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileInterimRmic.gmk)
interim-cldrconverter:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CopyInterimCLDRConverter.gmk)
interim-tzdb:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CopyInterimTZDB.gmk)
buildtools-jdk:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileToolsJdk.gmk)
buildtools-modules:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileModuleTools.gmk)
buildtools-hotspot:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileToolsHotspot.gmk)
ALL_TARGETS += buildtools-langtools interim-langtools \
interim-rmic interim-cldrconverter interim-tzdb buildtools-jdk buildtools-modules \
buildtools-hotspot
################################################################################
# Special targets for certain modules
generate-exported-symbols:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f BuildStatic.gmk)
ALL_TARGETS += generate-exported-symbols
################################################################################
# Gensrc targets, generating source before java compilation can be done
#
$(eval $(call DeclareRecipesForPhase, GENSRC, \
TARGET_SUFFIX := gensrc-src, \
FILE_PREFIX := Gensrc, \
MAKE_SUBDIR := gensrc, \
CHECK_MODULES := $(ALL_MODULES), \
))
$(foreach m, $(GENSRC_MODULES), $(eval $m-gensrc: $m-gensrc-src))
LANGTOOLS_GENSRC_TARGETS := $(filter $(addsuffix -%, $(LANGTOOLS_MODULES)), $(GENSRC_TARGETS))
INTERIM_LANGTOOLS_GENSRC_TARGETS := $(filter $(addsuffix -%, \
$(INTERIM_LANGTOOLS_BASE_MODULES)), $(GENSRC_TARGETS))
HOTSPOT_GENSRC_TARGETS := $(filter $(addsuffix -%, $(HOTSPOT_MODULES)), $(GENSRC_TARGETS))
JDK_GENSRC_TARGETS := $(filter-out $(LANGTOOLS_GENSRC_TARGETS) \
$(HOTSPOT_GENSRC_TARGETS), $(GENSRC_TARGETS))
GENSRC_MODULEINFO_MODULES := $(ALL_MODULES)
GENSRC_MODULEINFO_TARGETS := $(addsuffix -gensrc-moduleinfo, \
$(GENSRC_MODULEINFO_MODULES))
GENSRC_MODULES := $(GENSRC_MODULEINFO_MODULES)
GENSRC_TARGETS += $(sort $(GENSRC_MODULEINFO_TARGETS) \
$(addsuffix -gensrc, $(GENSRC_MODULES)))
define DeclareModuleInfoRecipe
$1-gensrc-moduleinfo:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) \
-f GensrcModuleInfo.gmk MODULE=$1)
$1-gensrc: $1-gensrc-moduleinfo
endef
$(foreach m, $(GENSRC_MODULEINFO_MODULES), $(eval $(call DeclareModuleInfoRecipe,$m)))
ALL_TARGETS += $(GENSRC_TARGETS)
################################################################################
# Generate data targets
$(eval $(call DeclareRecipesForPhase, GENDATA, \
TARGET_SUFFIX := gendata, \
FILE_PREFIX := Gendata, \
MAKE_SUBDIR := gendata, \
CHECK_MODULES := $(ALL_MODULES), \
USE_WRAPPER := true))
ALL_TARGETS += $(GENDATA_TARGETS)
################################################################################
# Copy files targets
$(eval $(call DeclareRecipesForPhase, COPY, \
TARGET_SUFFIX := copy, \
FILE_PREFIX := Copy, \
MAKE_SUBDIR := copy, \
CHECK_MODULES := $(ALL_MODULES), \
USE_WRAPPER := true, \
))
ALL_COPY_MODULES += $(COPY_MODULES)
ALL_COPY_TARGETS += $(COPY_TARGETS)
IMPORT_COPY_MODULES := $(call FindImportedModules)
IMPORT_COPY_TARGETS := $(addsuffix -copy, $(IMPORT_COPY_MODULES))
ALL_COPY_MODULES += $(IMPORT_COPY_MODULES)
ALL_COPY_TARGETS += $(IMPORT_COPY_TARGETS)
define DeclareImportCopyRecipe
$1-copy:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) \
-f CopyImportModules.gmk MODULE=$1)
endef
$(foreach m, $(IMPORT_COPY_MODULES), $(eval $(call DeclareImportCopyRecipe,$m)))
ALL_TARGETS += $(ALL_COPY_TARGETS)
################################################################################
# Targets for compiling all java modules.
JAVA_MODULES := $(ALL_MODULES)
JAVA_TARGETS := $(addsuffix -java, $(JAVA_MODULES))
define DeclareCompileJavaRecipe
$1-java:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) \
-f CompileJavaModules.gmk MODULE=$1)
endef
$(foreach m, $(JAVA_MODULES), $(eval $(call DeclareCompileJavaRecipe,$m)))
ALL_TARGETS += $(JAVA_TARGETS)
################################################################################
# Targets for running rmic.
$(eval $(call DeclareRecipesForPhase, RMIC, \
TARGET_SUFFIX := rmic, \
FILE_PREFIX := Rmic, \
MAKE_SUBDIR := rmic, \
CHECK_MODULES := $(ALL_MODULES)))
ALL_TARGETS += $(RMIC_TARGETS)
################################################################################
# Targets for compiling native libraries
$(eval $(call DeclareRecipesForPhase, LIBS, \
TARGET_SUFFIX := libs, \
FILE_PREFIX := Lib, \
MAKE_SUBDIR := lib, \
CHECK_MODULES := $(ALL_MODULES), \
USE_WRAPPER := true))
ALL_TARGETS += $(LIBS_TARGETS)
################################################################################
# Targets for compiling native executables
$(eval $(call DeclareRecipesForPhase, LAUNCHER, \
TARGET_SUFFIX := launchers, \
FILE_PREFIX := Launcher, \
MAKE_SUBDIR := launcher, \
CHECK_MODULES := $(ALL_MODULES), \
USE_WRAPPER := true))
ALL_TARGETS += $(LAUNCHER_TARGETS)
################################################################################
# Build hotspot target
HOTSPOT_VARIANT_TARGETS := $(addprefix hotspot-, $(JVM_VARIANTS))
HOTSPOT_VARIANT_GENSRC_TARGETS := $(addsuffix -gensrc, $(HOTSPOT_VARIANT_TARGETS))
HOTSPOT_VARIANT_LIBS_TARGETS := $(addsuffix -libs, $(HOTSPOT_VARIANT_TARGETS))
define DeclareHotspotGensrcRecipe
hotspot-$1-gensrc:
$$(call LogInfo, Building JVM variant '$1' with features '$(JVM_FEATURES_$1)')
+($(CD) $(TOPDIR)/make/hotspot && $(MAKE) $(MAKE_ARGS) -f gensrc/GenerateSources.gmk \
JVM_VARIANT=$1)
endef
$(foreach v, $(JVM_VARIANTS), $(eval $(call DeclareHotspotGensrcRecipe,$v)))
define DeclareHotspotLibsRecipe
hotspot-$1-libs:
+($(CD) $(TOPDIR)/make/hotspot && $(MAKE) $(MAKE_ARGS) -f lib/CompileLibraries.gmk \
JVM_VARIANT=$1)
endef
$(foreach v, $(JVM_VARIANTS), $(eval $(call DeclareHotspotLibsRecipe,$v)))
hotspot-ide-project:
+($(CD) $(TOPDIR)/make/hotspot && $(MAKE) $(MAKE_ARGS) -f ide/CreateVSProject.gmk)
ALL_TARGETS += $(HOTSPOT_VARIANT_TARGETS) $(HOTSPOT_VARIANT_GENSRC_TARGETS) \
$(HOTSPOT_VARIANT_LIBS_TARGETS) hotspot-ide-project
################################################################################
# Generate libs and launcher targets for creating compile_commands.json fragments
define DeclareCompileCommandsRecipe
$1-compile-commands:
$$(call LogInfo, Generating compile_commands.json fragments for $1)
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Main.gmk $1-only \
GENERATE_COMPILE_COMMANDS_ONLY=true)
COMPILE_COMMANDS_TARGETS_$2 += $1-compile-commands
endef
$(foreach t, $(HOTSPOT_VARIANT_LIBS_TARGETS), \
$(eval $(call DeclareCompileCommandsRecipe,$t,HOTSPOT)) \
)
$(foreach t, $(LIBS_TARGETS) $(LAUNCHER_TARGETS), \
$(eval $(call DeclareCompileCommandsRecipe,$t,JDK)) \
)
compile-commands compile-commands-hotspot:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileCommands.gmk)
ALL_TARGETS += $(COMPILE_COMMANDS_TARGETS_HOTSPOT) $(COMPILE_COMMANDS_TARGETS_JDK)
ALL_TARGETS += compile-commands compile-commands-hotspot
################################################################################
# VS Code projects
vscode-project:
+($(CD) $(TOPDIR)/make/vscode && $(MAKE) $(MAKE_ARGS) -f CreateVSCodeProject.gmk \
VSCODE_INDEXER=cpptools)
vscode-project-clangd:
+($(CD) $(TOPDIR)/make/vscode && $(MAKE) $(MAKE_ARGS) -f CreateVSCodeProject.gmk \
VSCODE_INDEXER=clangd)
vscode-project-rtags:
+($(CD) $(TOPDIR)/make/vscode && $(MAKE) $(MAKE_ARGS) -f CreateVSCodeProject.gmk \
VSCODE_INDEXER=rtags)
vscode-project-ccls:
+($(CD) $(TOPDIR)/make/vscode && $(MAKE) $(MAKE_ARGS) -f CreateVSCodeProject.gmk \
VSCODE_INDEXER=ccls)
ALL_TARGETS += vscode-project vscode-project-clangd vscode-project-rtags \
vscode-project-ccls
################################################################################
# Build demos targets
demos-jdk:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileDemos.gmk)
test-image-demos-jdk:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CompileDemos.gmk images)
ALL_TARGETS += demos-jdk test-image-demos-jdk
################################################################################
# Jigsaw specific data and analysis targets.
generate-summary:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f GenerateModuleSummary.gmk)
ALL_TARGETS += generate-summary
################################################################################
# Jmod targets
JMOD_MODULES := $(ALL_MODULES)
JMOD_TARGETS := $(addsuffix -jmod, $(JMOD_MODULES))
define DeclareJmodRecipe
$1-jmod:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CreateJmods.gmk \
MODULE=$1)
endef
$(foreach m, $(JMOD_MODULES), $(eval $(call DeclareJmodRecipe,$m)))
ALL_TARGETS += $(JMOD_TARGETS)
################################################################################
# Images targets
store-source-revision:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f SourceRevision.gmk store-source-revision)
create-source-revision-tracker:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f SourceRevision.gmk create-source-revision-tracker)
BOOTCYCLE_TARGET := product-images
bootcycle-images:
ifneq ($(COMPILE_TYPE), cross)
$(call LogWarn, Boot cycle build step 2: Building a new JDK image using previously built image)
$(call MakeDir, $(OUTPUTDIR)/bootcycle-build)
+$(MAKE) $(MAKE_ARGS) -f $(TOPDIR)/make/Init.gmk PARALLEL_TARGETS=$(BOOTCYCLE_TARGET) \
LOG_PREFIX="[bootcycle] " JOBS= SPEC=$(dir $(SPEC))bootcycle-spec.gmk main
else
$(call LogWarn, Boot cycle build disabled when cross compiling)
endif
zip-security:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f ZipSecurity.gmk)
zip-source:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f ZipSource.gmk)
jrtfs-jar:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f JrtfsJar.gmk)
jdk-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Images.gmk jdk)
legacy-jre-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Images.gmk jre)
symbols-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Images.gmk symbols)
mac-jdk-bundle:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f MacBundles.gmk jdk-bundle)
mac-legacy-jre-bundle:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f MacBundles.gmk jre-bundle)
release-file:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f ReleaseFile.gmk)
exploded-image-optimize:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f ExplodedImageOptimize.gmk)
ifeq ($(JCOV_ENABLED), true)
jcov-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Coverage.gmk jcov-image)
endif
ALL_TARGETS += store-source-revision create-source-revision-tracker bootcycle-images zip-security \
zip-source jrtfs-jar jdk-image legacy-jre-image \
symbols-image mac-jdk-bundle mac-legacy-jre-bundle \
release-file exploded-image-optimize jcov-image
################################################################################
# Docs targets
# If building full docs, to complete docs-*-api we need both the javadoc and
# modulegraph targets.
docs-jdk-api-javadoc:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-jdk-api-javadoc)
docs-jdk-api-modulegraph:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-jdk-api-modulegraph)
docs-javase-api-javadoc:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-javase-api-javadoc)
docs-javase-api-modulegraph:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-javase-api-modulegraph)
docs-reference-api-javadoc:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-reference-api-javadoc)
docs-reference-api-modulegraph:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-reference-api-modulegraph)
docs-jdk-specs:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-jdk-specs)
docs-jdk-index:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-jdk-index)
docs-zip:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-zip)
docs-specs-zip:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Docs.gmk docs-specs-zip)
update-build-docs:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f UpdateBuildDocs.gmk)
update-x11wrappers:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f UpdateX11Wrappers.gmk)
ALL_TARGETS += docs-jdk-api-javadoc docs-jdk-api-modulegraph \
docs-javase-api-javadoc docs-javase-api-modulegraph \
docs-reference-api-javadoc docs-reference-api-modulegraph docs-jdk-specs \
docs-jdk-index docs-zip docs-specs-zip update-build-docs update-x11wrappers
################################################################################
# Cross compilation support
ifeq ($(CREATING_BUILDJDK), true)
# This target is only called by the recursive call below.
create-buildjdk-interim-image-helper: interim-image jdk.jlink-launchers \
java.base-copy jdk.jdeps-launchers
endif
BUILDJDK_MODULES := $(sort $(foreach m, jdk.jlink $(INTERIM_IMAGE_MODULES), \
$(call FindTransitiveDepsForModule, $m) $m))
create-buildjdk-interim-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Main.gmk \
$@-helper \
SPEC=$(dir $(SPEC))buildjdk-spec.gmk \
HOTSPOT_SPEC=$(dir $(SPEC))buildjdk-spec.gmk \
CREATING_BUILDJDK=true \
LOG_PREFIX="[buildjdk] " \
JAVA_MODULES="$(BUILDJDK_MODULES)" \
)
ALL_TARGETS += create-buildjdk-copy create-buildjdk-interim-image
################################################################################
# The interim-image is a small jlinked image that is used to generate artifacts
# at build time for use when linking the real images.
INTERIM_JMOD_TARGETS := $(addsuffix -interim-jmod, $(INTERIM_IMAGE_MODULES))
define DeclareInterimJmodRecipe
$1-interim-jmod:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f CreateJmods.gmk \
MODULE=$1 \
JMODS_DIR=$(INTERIM_JMODS_DIR) \
JMODS_SUPPORT_DIR=$(INTERIM_JMODS_DIR)/support \
INTERIM_JMOD=true \
)
endef
$(foreach m, $(INTERIM_IMAGE_MODULES), $(eval $(call DeclareInterimJmodRecipe,$m)))
interim-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f InterimImage.gmk)
ifeq ($(ENABLE_GENERATE_CLASSLIST), true)
generate-link-opt-data:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f GenerateLinkOptData.gmk)
endif
ALL_TARGETS += $(INTERIM_JMOD_TARGETS) interim-image generate-link-opt-data
################################################################################
# Generate test names for all JTReg test groups
#
define DeclareRunTestRecipe
test-$1:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f RunTests.gmk \
TEST="$1")
exploded-test-$1:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f RunTests.gmk \
TEST="$1" JDK_IMAGE_DIR=$(JDK_OUTPUTDIR))
endef
# ALL_NAMED_TESTS is defined in FindTests.gmk
$(foreach t, $(ALL_NAMED_TESTS), $(eval $(call DeclareRunTestRecipe,$t)))
ALL_TEST_TARGETS := $(addprefix test-, $(ALL_NAMED_TESTS))
# We only support the "exploded-test-gtest" shortcut
ALL_EXPLODED_TESTS := gtest
ALL_EXPLODED_TEST_TARGETS := $(addprefix exploded-test-, $(ALL_EXPLODED_TESTS))
ALL_TARGETS += $(ALL_TEST_TARGETS) $(ALL_EXPLODED_TEST_TARGETS)
################################################################################
# Build tests and microbenchmarks
#
prepare-test-image:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f TestImage.gmk prepare-test-image)
build-test-hotspot-jtreg-native:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregNativeHotspot.gmk \
build-test-hotspot-jtreg-native)
test-image-hotspot-jtreg-native:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregNativeHotspot.gmk \
test-image-hotspot-jtreg-native)
build-test-jdk-jtreg-native:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregNativeJdk.gmk \
build-test-jdk-jtreg-native)
test-image-jdk-jtreg-native:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregNativeJdk.gmk \
test-image-jdk-jtreg-native)
build-test-hotspot-jtreg-graal:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregGraalUnit.gmk \
build-test-hotspot-jtreg-graal)
test-image-hotspot-jtreg-graal:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f JtregGraalUnit.gmk \
test-image-hotspot-jtreg-graal)
ifeq ($(BUILD_GTEST), true)
test-image-hotspot-gtest:
+($(CD) $(TOPDIR)/make/hotspot/test && $(MAKE) $(MAKE_ARGS) -f GtestImage.gmk)
endif
build-test-lib:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) -f BuildTestLib.gmk)
ifeq ($(BUILD_FAILURE_HANDLER), true)
# Builds the failure handler jtreg extension
build-test-failure-handler:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) \
-f BuildFailureHandler.gmk build)
# Copies the failure handler jtreg extension into the test image
test-image-failure-handler:
+($(CD) $(TOPDIR)/make/test && $(MAKE) $(MAKE_ARGS) \
-f BuildFailureHandler.gmk images)
endif
build-microbenchmark:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f test/BuildMicrobenchmark.gmk)
ALL_TARGETS += prepare-test-image build-test-hotspot-jtreg-native \
test-image-hotspot-jtreg-native build-test-jdk-jtreg-native \
test-image-jdk-jtreg-native build-test-lib build-test-failure-handler \
test-failure-handler test-image-failure-handler test-image-hotspot-gtest \
test-image-hotspot-jtreg-graal build-test-hotspot-jtreg-graal \
build-microbenchmark
################################################################################
# Run tests
test:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f RunTests.gmk \
TEST="$(TEST)")
exploded-test:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f RunTests.gmk \
TEST="$(TEST)" JDK_IMAGE_DIR=$(JDK_OUTPUTDIR))
jcov-test:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f RunTests.gmk \
TEST="$(TEST)" TEST_OPTS_JCOV=true)
ALL_TARGETS += test exploded-test jcov-test
################################################################################
# Bundles
product-bundles:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk product-bundles)
legacy-bundles:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk legacy-bundles)
test-bundles:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk test-bundles)
docs-bundles:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk docs-bundles)
ifeq ($(JCOV_ENABLED), true)
jcov-bundles:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Bundles.gmk jcov-bundles)
endif
ALL_TARGETS += product-bundles legacy-bundles test-bundles docs-bundles jcov-bundles
################################################################################
# Install targets
install:
+($(CD) $(TOPDIR)/make && $(MAKE) $(MAKE_ARGS) -f Install.gmk)
ALL_TARGETS += install
################################################################################
#
# Dependency declarations between targets.
#
# These are declared in two groups. First all dependencies between targets that
# have recipes above as these dependencies may be disabled. Then the aggregator
# targets that do not have recipes of their own, which will never have their
# dependencies disabled.
#
################################################################################
# Targets with recipes above
# If running an *-only target, parallel execution and dependencies between
# recipe targets are disabled. This makes it possible to run a select set of
# recipe targets in order. It's the responsibility of the user to make sure
# all prerequisites are fulfilled.
ifneq ($(findstring -only, $(MAKECMDGOALS)), )
.NOTPARALLEL:
else
$(LANGTOOLS_GENSRC_TARGETS): buildtools-langtools
interim-langtools: $(INTERIM_LANGTOOLS_GENSRC_TARGETS)
buildtools-jdk: interim-langtools interim-cldrconverter interim-tzdb
buildtools-hotspot: interim-langtools
buildtools-modules: exploded-image-base
$(HOTSPOT_GENSRC_TARGETS): interim-langtools buildtools-hotspot
$(JDK_GENSRC_TARGETS): interim-langtools buildtools-jdk
$(GENSRC_MODULEINFO_TARGETS): buildtools-jdk
$(GENDATA_TARGETS): interim-langtools buildtools-jdk
interim-rmic: interim-langtools
$(RMIC_TARGETS): interim-langtools interim-rmic
$(JAVA_TARGETS): interim-langtools
# Declare dependencies between hotspot-<variant>* targets
$(foreach v, $(JVM_VARIANTS), \
$(eval hotspot-$v-gensrc: java.base-copy) \
$(eval hotspot-$v-libs: hotspot-$v-gensrc java.base-copy) \
)
hotspot-ide-project: hotspot exploded-image
generate-exported-symbols: java.base-libs jdk.jdwp.agent-libs
# If not already set, set the JVM variant target so that the JVM will be built.
JVM_MAIN_LIB_TARGETS ?= hotspot-$(JVM_VARIANT_MAIN)-libs
# Building one JVM variant is enough to start building the other libs
$(LIBS_TARGETS): $(JVM_MAIN_LIB_TARGETS)
$(LAUNCHER_TARGETS): java.base-libs
ifeq ($(STATIC_BUILD), true)
$(LAUNCHER_TARGETS): generate-exported-symbols
endif
# The demos are currently linking to libjvm and libjava, just like all other
# jdk libs, even though they don't need to. To avoid warnings, make sure they
# aren't built until after libjava and libjvm are available to link to.
demos-jdk: java.base-libs exploded-image
test-image-demos-jdk: demos-jdk
# Declare dependency from <module>-java to <module>-gensrc
$(foreach m, $(GENSRC_MODULES), $(eval $m-java: $m-gensrc))
# Declare dependencies between java modules
$(foreach m, $(JAVA_MODULES), \
$(eval $m-java: $(addsuffix -java, $(filter $(JAVA_MODULES), \
$(call FindDepsForModule,$m)))))
# Declare dependencies between <module>-rmic to <module>-java
$(foreach m, $(RMIC_MODULES), $(eval $m-rmic: $m-java))
# Declare dependencies from <module>-lib to <module>-java
# Skip modules that do not have java source.
$(foreach m, $(filter $(JAVA_MODULES), $(LIBS_MODULES)), $(eval $m-libs: $m-java))
# Declare dependencies from all other <module>-lib to java.base-lib
$(foreach t, $(filter-out java.base-libs, $(LIBS_TARGETS)), \
$(eval $t: java.base-libs))
# jdk.accessibility depends on java.desktop
jdk.accessibility-libs: java.desktop-libs
# This dependency needs to be explicitly declared. jdk.jdi-gensrc generates a
# header file used by jdk.jdwp.agent-libs. The jdk.jdwp.agent-gensrc is a
# virtual target.
jdk.jdwp.agent-libs: jdk.jdwp.agent-gensrc
# The swing beans need to have java base properly generated to avoid errors
# in javadoc. The X11 wrappers need the java.base include files to have been
# copied and processed.
java.desktop-gensrc-src: java.base-gensrc java.base-copy
# The annotation processing for jdk.internal.vm.compiler
# and jdk.internal.vm.compiler.management needs classes from the current JDK.
jdk.internal.vm.compiler-gensrc-src: $(addsuffix -java, \
$(call FindTransitiveDepsForModule, jdk.internal.vm.compiler))
jdk.internal.vm.compiler.management-gensrc-src: $(addsuffix -java, \
$(call FindTransitiveDepsForModule, jdk.internal.vm.compiler.management))
# For these modules, the gensrc step is generating a module-info.java.extra
# file to be processed by the gensrc-moduleinfo target.
jdk.internal.vm.compiler-gensrc-moduleinfo: jdk.internal.vm.compiler-gensrc-src
jdk.internal.vm.compiler.management-gensrc-moduleinfo: jdk.internal.vm.compiler.management-gensrc-src
jdk.jdeps-gendata: java rmic
# The ct.sym generation uses all the moduleinfos as input
jdk.compiler-gendata: $(GENSRC_MODULEINFO_TARGETS)
# Declare dependencies between jmod targets.
# java.base jmod needs jrt-fs.jar and access to the other jmods to be built.
# When creating the BUILDJDK, we don't need to add hashes to java.base, thus
# we don't need to depend on all other jmods
ifneq ($(CREATING_BUILDJDK), true)
java.base-jmod: jrtfs-jar $(filter-out java.base-jmod, $(JMOD_TARGETS))
endif
# If not already set, set the JVM target so that the JVM will be built.
JVM_MAIN_TARGETS ?= hotspot
# Building java.base-jmod requires all of VM (ie hotspot) to be built.
java.base-jmod: $(JVM_MAIN_TARGETS)
# Declare dependencies from <module>-jmod to all other module targets
$(foreach m, $(JAVA_MODULES), $(eval $m_JMOD_DEPS += $m-java))
$(foreach m, $(GENDATA_MODULES), $(eval $m_JMOD_DEPS += $m-gendata))
$(foreach m, $(RMIC_MODULES), $(eval $m_JMOD_DEPS += $m-rmic))
$(foreach m, $(LIBS_MODULES), $(eval $m_JMOD_DEPS += $m-libs))
$(foreach m, $(LAUNCHER_MODULES), $(eval $m_JMOD_DEPS += $m-launchers))
$(foreach m, $(COPY_MODULES), $(eval $m_JMOD_DEPS += $m-copy))
$(foreach m, $(ALL_MODULES), $(eval $m-jmod: $($(m)_JMOD_DEPS)))
$(foreach m, $(INTERIM_IMAGE_MODULES), $(eval $m-interim-jmod: $($(m)_JMOD_DEPS)))
# Setup the minimal set of generated native source dependencies for hotspot
$(foreach v, $(JVM_VARIANTS), \
$(eval hotspot-$v-libs-compile-commands: hotspot-$v-gensrc) \
$(foreach m, $(filter java.desktop jdk.hotspot.agent, $(GENSRC_MODULES)), \
$(eval hotspot-$v-libs-compile-commands: $m-gensrc)) \
)
# For the full JDK compile commands, create all possible generated sources
$(foreach m, $(GENSRC_MODULES), $(eval $m-libs-compile-commands: $m-gensrc))
$(foreach m, $(filter $(JAVA_MODULES), $(LIBS_MODULES)), $(eval $m-libs-compile-commands: $m-java))
$(COMPILE_COMMANDS_TARGETS_HOTSPOT): clean-compile-commands
$(COMPILE_COMMANDS_TARGETS_JDK): clean-compile-commands
compile-commands-hotspot: $(COMPILE_COMMANDS_TARGETS_HOTSPOT)
compile-commands: $(COMPILE_COMMANDS_TARGETS_HOTSPOT) $(COMPILE_COMMANDS_TARGETS_JDK)
vscode-project: compile-commands
vscode-project-clangd: compile-commands
vscode-project-rtags: compile-commands
vscode-project-ccls: compile-commands
# Jmods cannot be created until we have the jmod tool ready to run. During
# a normal build we run it from the exploded image, but when cross compiling
# it's run from the buildjdk, which is either created at build time or user
# supplied.
ifeq ($(CREATE_BUILDJDK), true)
ifneq ($(CREATING_BUILDJDK), true)
# When cross compiling and buildjdk is to be created, simply depend on
# creating the buildjdk.
$(JMOD_TARGETS): create-buildjdk
buildtools-modules: create-buildjdk
else
# While actually creating the buildjdk, we need to list the bare
# minimum dependencies needed before running jmod, to avoid building
# more than necessary. This includes:
# * all java modules
# * jdk.jlink-launchers
# * copy jvm.cfg (done in java.base-copy)
# * tzdb.dat (done in java.base-gendata)
# Without all of these jimage, jlink and jmod won't start.
$(JMOD_TARGETS) $(INTERIM_JMOD_TARGETS): java.base-libs java.base-copy \
java.base-gendata jdk.jlink-launchers java
endif
else
# The normal non cross compilation case uses needs to wait for the full
# exploded-image to avoid a race with the optimize target.
$(JMOD_TARGETS) $(INTERIM_JMOD_TARGETS): exploded-image
endif
# All modules include the main license files from java.base.
$(JMOD_TARGETS): java.base-copy
zip-security: java.base-java java.security.jgss-java java.security.jgss-libs \
$(filter jdk.crypto%, $(JAVA_TARGETS))
zip-source: gensrc rmic
jrtfs-jar: interim-langtools
build-microbenchmark: interim-langtools exploded-image
ifeq ($(ENABLE_GENERATE_CLASSLIST), true)
ifeq ($(CREATE_BUILDJDK), true)
# If creating a buildjdk, the interim image needs to be based on that.
generate-link-opt-data: create-buildjdk
else ifeq ($(EXTERNAL_BUILDJDK), false)
# If an external buildjdk has been provided, we skip generating an
# interim-image and just use the external buildjdk for generating
# classlist.
generate-link-opt-data: interim-image
endif
generate-link-opt-data: buildtools-jdk
# The generated classlist needs to go into java.base-jmod.
java.base-jmod jdk.jlink-jmod jdk-image legacy-jre-image: generate-link-opt-data
endif
release-file: create-source-revision-tracker
jdk-image: jmods zip-source demos release-file
legacy-jre-image: jmods release-file
symbols-image: $(LIBS_TARGETS) $(LAUNCHER_TARGETS)
mac-jdk-bundle: jdk-image
mac-legacy-jre-bundle: legacy-jre-image
ifeq ($(JCOV_INPUT_JDK), )
jcov-image: jdk-image
endif
# The optimize target can run as soon as the modules dir has been completely
# populated (java, copy and gendata targets) and the basic libs and launchers
# have been built.
exploded-image-optimize: java copy gendata java.base-libs java.base-launchers \
buildtools-modules
bootcycle-images: jdk-image
docs-jdk-api-javadoc: $(GENSRC_TARGETS) rmic
docs-javase-api-javadoc: $(GENSRC_TARGETS) rmic
docs-reference-api-javadoc: $(GENSRC_TARGETS) rmic
docs-jdk-api-modulegraph: exploded-image buildtools-modules
docs-javase-api-modulegraph: exploded-image buildtools-modules
docs-reference-api-modulegraph: exploded-image buildtools-modules
# If not already set, then set the JVM specific docs targets
JVM_DOCS_TARGETS ?= hotspot-$(JVM_VARIANT_MAIN)-gensrc
# The gensrc steps for hotspot and jdk.jdi create html spec files.
docs-jdk-specs: buildtools-jdk $(JVM_DOCS_TARGETS) jdk.jdi-gensrc \
docs-jdk-index
docs-zip: docs-jdk
docs-specs-zip: docs-jdk-specs
# Tests
test: jdk-image test-image
exploded-test: exploded-image test-image
jcov-test: jcov-image test-image
test-make: clean-test-make compile-commands
test-make-compile-commands: compile-commands
# Declare dependency for all generated test targets
$(foreach t, $(filter-out test-make%, $(ALL_TEST_TARGETS)), $(eval $t: jdk-image test-image))
$(foreach t, $(ALL_EXPLODED_TEST_TARGETS), $(eval $t: exploded-image test-image))
interim-image: $(INTERIM_JMOD_TARGETS)
build-test-lib: exploded-image
build-test-failure-handler: interim-langtools
test-image-failure-handler: build-test-failure-handler
build-test-hotspot-jtreg-native: buildtools-jdk \
hotspot-$(JVM_VARIANT_MAIN)-libs
build-test-jdk-jtreg-native: buildtools-jdk java.base-libs
build-test-hotspot-jtreg-graal: exploded-image
test-image-hotspot-jtreg-native: build-test-hotspot-jtreg-native
test-image-jdk-jtreg-native: build-test-jdk-jtreg-native
test-image-hotspot-jtreg-graal: build-test-hotspot-jtreg-graal
test-image-hotspot-gtest: hotspot
install: product-images
product-bundles: product-images
legacy-bundles: legacy-images
test-bundles: test-image
docs-bundles: docs-image
jcov-bundles: jcov-image
generate-summary: jmods buildtools-modules
update-x11wrappers: java.base-copy buildtools-jdk
endif
################################################################################
# Virtual targets without recipes
# If not already set, set the JVM specific tools targets
JVM_TOOLS_TARGETS ?= buildtools-hotspot
buildtools: buildtools-langtools interim-langtools interim-rmic \
buildtools-jdk $(JVM_TOOLS_TARGETS)
# Declare dependencies from hotspot-<variant> targets
$(foreach v, $(JVM_VARIANTS), \
$(eval hotspot-$v: hotspot-$v-gensrc hotspot-$v-libs) \
)
hotspot: $(HOTSPOT_VARIANT_TARGETS)
# Create targets hotspot-libs and hotspot-gensrc.
$(foreach v, $(JVM_VARIANTS), \
$(eval hotspot-libs: hotspot-$v-libs) \
$(eval hotspot-gensrc: hotspot-$v-gensrc) \
)
gensrc: $(GENSRC_TARGETS)
gendata: $(GENDATA_TARGETS)
copy: $(ALL_COPY_TARGETS)
java: $(JAVA_TARGETS)
rmic: $(RMIC_TARGETS)
libs: $(LIBS_TARGETS)
launchers: $(LAUNCHER_TARGETS)
jmods: $(JMOD_TARGETS)
# Explicitly declare dependency for virtual target jdk.jdwp.agent-gensrc which
# is actually handled by jdk.jdi-gensrc
jdk.jdwp.agent-gensrc: jdk.jdi-gensrc
# Declare dependencies from <module> to all the individual targets specific
# to that module <module>-*, that are needed for the exploded image.
$(foreach m, $(GENSRC_MODULES), $(eval $m: $m-gensrc))
$(foreach m, $(JAVA_MODULES), $(eval $m: $m-java))
$(foreach m, $(GENDATA_MODULES), $(eval $m: $m-gendata))
$(foreach m, $(RMIC_MODULES), $(eval $m: $m-rmic))
$(foreach m, $(LIBS_MODULES), $(eval $m: $m-libs))
$(foreach m, $(LAUNCHER_MODULES), $(eval $m: $m-launchers))
$(foreach m, $(ALL_COPY_MODULES), $(eval $m: $m-copy))
# Building java.base includes building all of hotspot.
java.base: $(JVM_MAIN_TARGETS)
demos: demos-jdk
# The "exploded image" is a locally runnable JDK in $(OUTPUTDIR)/jdk.
exploded-image-base: $(ALL_MODULES)
exploded-image: exploded-image-base release-file
# When cross compiling, no need to optimize the exploded image since it won't
# be runnable on the host platform anyway.
ifneq ($(COMPILE_TYPE), cross)
exploded-image: exploded-image-optimize
endif
create-buildjdk: create-buildjdk-interim-image
docs-jdk-api: docs-jdk-api-javadoc
docs-javase-api: docs-javase-api-javadoc
docs-reference-api: docs-reference-api-javadoc
# If we're building full docs, we must also generate the module graphs to
# get non-broken api documentation.
ifeq ($(ENABLE_FULL_DOCS), true)
docs-jdk-api: docs-jdk-api-modulegraph
docs-javase-api: docs-javase-api-modulegraph
docs-reference-api: docs-reference-api-modulegraph
endif
docs-jdk: docs-jdk-api docs-jdk-specs docs-jdk-index
docs-javase: docs-javase-api
docs-reference: docs-reference-api
# alias for backwards compatibility
docs-javadoc: docs-jdk-api
mac-bundles: mac-jdk-bundle
# The $(OUTPUTDIR)/images directory contain the resulting deliverables,
# and in line with this, our targets for creating these are named *-image[s].
# This target builds the product images, e.g. the JDK image
# (and possibly other, more specific versions)
product-images: jdk-image symbols-image exploded-image
# This target builds the legacy images, e.g. the legacy JRE image
legacy-images: legacy-jre-image
# zip-security is actually a bundle, but for now it needs to be considered
# an image until this can be cleaned up properly.
product-images: zip-security
# The module summary cannot be run when:
# * Cross compiling and building a partial BUILDJDK for the build host
# * An external buildjdk has been supplied since it may not match the
# module selection of the target jdk
ifneq ($(CREATE_BUILDJDK), true)
ifeq ($(EXTERNAL_BUILDJDK), false)
product-images: generate-summary
endif
endif
ifeq ($(call isTargetOs, macosx), true)
product-images: mac-jdk-bundle
legacy-images: mac-legacy-jre-bundle
endif
# This target builds the documentation image
docs-image: docs-jdk
# If not already set, set the JVM specific targets to build the test image
JVM_TEST_IMAGE_TARGETS ?= test-image-hotspot-jtreg-native test-image-hotspot-gtest
ifeq ($(INCLUDE_GRAAL), true)
JVM_TEST_IMAGE_TARGETS += test-image-hotspot-jtreg-graal
endif
# This target builds the test image
test-image: prepare-test-image \
test-image-jdk-jtreg-native test-image-failure-handler \
test-image-demos-jdk $(JVM_TEST_IMAGE_TARGETS)
ifneq ($(JMH_CORE_JAR), )
test-image: build-microbenchmark
endif
################################################################################
# all-images builds all our deliverables as images.
all-images: product-images test-image docs-image
# all-bundles packages all our deliverables as tar.gz bundles.
all-bundles: product-bundles test-bundles docs-bundles
ALL_TARGETS += buildtools hotspot hotspot-libs hotspot-gensrc gensrc gendata \
copy java rmic libs launchers jmods \
jdk.jdwp.agent-gensrc $(ALL_MODULES) demos \
exploded-image-base exploded-image \
create-buildjdk docs-jdk-api docs-javase-api docs-reference-api docs-jdk \
docs-javase docs-reference docs-javadoc mac-bundles product-images legacy-images \
docs-image test-image all-images \
all-bundles
################################################################################
# Traditional targets typically run by users.
# These can be considered aliases for the targets now named by a more
# "modern" naming scheme.
default: $(DEFAULT_MAKE_TARGET)
jdk: exploded-image
images: product-images
docs: docs-image
bundles: all-bundles
all: all-images
ALL_TARGETS += default jdk images docs bundles all
# Aliases used for running tests.
# Let "run-test" be an alias for "test"
$(foreach t, $(ALL_NAMED_TESTS), $(eval run-test-$t: test-$t))
RUN_TEST_TARGETS := $(addprefix run-test-, $(ALL_NAMED_TESTS))
run-test: test
exploded-run-test: exploded-test
# "make check" is a common idiom for running basic testing
check: test-tier1
# Keep some old names as aliases
test-hotspot-jtreg: test-hotspot_all
test-hotspot-jtreg-native: test-hotspot_native_sanity
test-hotspot-gtest: exploded-test-gtest
test-jdk-jtreg-native: test-jdk_native_sanity
ALL_TARGETS += $(RUN_TEST_TARGETS) run-test exploded-run-test check \
test-hotspot-jtreg test-hotspot-jtreg-native test-hotspot-gtest \
test-jdk-jtreg-native
################################################################################
################################################################################
#
# Clean targets
#
################################################################################
# Clean targets are automatically run serially by the Makefile calling this
# file.
CLEAN_DIRS += hotspot jdk bootcycle-build test buildtools support \
images make-support test-make bundles buildjdk test-results test-support \
support/images
CLEAN_DIR_TARGETS := $(addprefix clean-, $(CLEAN_DIRS))
CLEAN_SUPPORT_DIRS += demos
CLEAN_SUPPORT_DIR_TARGETS := $(addprefix clean-, $(CLEAN_SUPPORT_DIRS))
CLEAN_TESTS += hotspot-jtreg-native jdk-jtreg-native lib
CLEAN_TEST_TARGETS += $(addprefix clean-test-, $(CLEAN_TESTS))
CLEAN_PHASES := gensrc java native include
CLEAN_PHASE_TARGETS := $(addprefix clean-, $(CLEAN_PHASES))
CLEAN_MODULE_TARGETS := $(addprefix clean-, $(ALL_MODULES))
# Construct targets of the form clean-$module-$phase
CLEAN_MODULE_PHASE_TARGETS := $(addprefix clean-, $(foreach m, $(ALL_MODULES), \
$(addprefix $m-, $(CLEAN_PHASES))))
# Remove everything, except the output from configure.
clean: $(CLEAN_DIR_TARGETS)
($(CD) $(OUTPUTDIR) && $(RM) -r build*.log* compile_commands.json)
$(ECHO) Cleaned all build artifacts.
clean-docs:
$(call CleanDocs)
clean-compile-commands:
$(call CleanMakeSupportDir,compile-commands)
$(CLEAN_DIR_TARGETS):
$(call CleanDir,$(patsubst clean-%, %, $@))
$(CLEAN_SUPPORT_DIR_TARGETS):
$(call CleanSupportDir,$(patsubst clean-%, %, $@))
$(CLEAN_TEST_TARGETS):
$(call CleanTest,$(patsubst clean-test-%, %, $@))
$(CLEAN_PHASE_TARGETS):
$(call Clean-$(patsubst clean-%,%, $@))
$(CLEAN_MODULE_TARGETS):
$(call CleanModule,$(patsubst clean-%, %, $@))
$(CLEAN_MODULE_PHASE_TARGETS):
$(call Clean-$(word 3, $(subst -,$(SPACE),$@)), \
$(word 2, $(subst -,$(SPACE),$@)))
# When removing the support dir, we must also remove jdk. Building classes has
# the side effect of generating native headers. The headers end up in support
# while classes and touch files end up in jdk.
clean-support: clean-jdk
clean-test: clean-test-results clean-test-support
# When cleaning images, also clean the support/images directory.
clean-images: clean-support/images
# Remove everything, including configure configuration. If the output
# directory was created by configure and now becomes empty, remove it as well.
dist-clean: clean
($(CD) $(OUTPUTDIR) && \
$(RM) -r *spec.gmk $(CONFIGURESUPPORT_OUTPUTDIR) Makefile compare.sh ide \
configure.log* build.log*)
$(if $(filter $(CONF_NAME),$(notdir $(OUTPUTDIR))), \
if test "x`$(LS) $(OUTPUTDIR)`" != x; then \
$(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ; \
else \
($(CD) $(TOPDIR) && $(ECHO) "Removing configuration directory for '$(CONF_NAME)'" \
&& $(RM) -r $(OUTPUTDIR)) \
fi \
)
$(ECHO) Cleaned everything, you will have to re-run configure.
ALL_TARGETS += clean clean-docs clean-compile-commands dist-clean $(CLEAN_DIR_TARGETS) \
$(CLEAN_SUPPORT_DIR_TARGETS) $(CLEAN_TEST_TARGETS) $(CLEAN_PHASE_TARGETS) \
$(CLEAN_MODULE_TARGETS) $(CLEAN_MODULE_PHASE_TARGETS)
################################################################################
# Declare *-only targets for each normal target
$(foreach t, $(ALL_TARGETS), $(eval $(t)-only: $(t)))
ALL_TARGETS += $(addsuffix -only, $(filter-out dist-clean clean%, $(ALL_TARGETS)))
################################################################################
# The following targets are intentionally not added to ALL_TARGETS since they
# are internal only, to support Init.gmk.
print-targets:
@$(ECHO) $(sort $(ALL_TARGETS))
print-modules:
@$(ECHO) $(sort $(ALL_MODULES))
print-tests:
@$(ECHO) $(sort $(ALL_NAMED_TESTS))
create-main-targets-include:
$(call LogInfo, Generating main target list)
@$(ECHO) ALL_MAIN_TARGETS := $(sort $(ALL_TARGETS)) > \
$(MAKESUPPORT_OUTPUTDIR)/main-targets.gmk
################################################################################
# Hook to include the corresponding custom file, if present.
$(eval $(call IncludeCustomExtension, Main-post.gmk))
.PHONY: $(ALL_TARGETS)
FRC: # Force target