#
# Copyright (c) 2013, 2017, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.  Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#

$(eval $(call IncludeCustomExtension, hotspot, gensrc/GensrcAdlc.gmk))

ifeq ($(call check-jvm-feature, compiler2), true)

  ADLC_SUPPORT_DIR := $(JVM_SUPPORT_DIR)/adlc

  ##############################################################################
  # Build the ad compiler (the adlc build tool)

  # Flags depending on the build platform/tool chain
  # NOTE: No optimization or debug flags set here
  ifeq ($(OPENJDK_BUILD_OS), linux)
    ADLC_CFLAGS := -fno-exceptions -DLINUX
  else ifeq ($(OPENJDK_BUILD_OS), solaris)
    ADLC_LDFLAGS := -m64
    ADLC_CFLAGS := -m64
    ADLC_CFLAGS_WARNINGS := +w
  else ifeq ($(OPENJDK_BUILD_OS), aix)
    ADLC_LDFLAGS := -q64
    ADLC_CFLAGS := -qnortti -qeh -q64 -DAIX
  else ifeq ($(OPENJDK_BUILD_OS), windows)
    ADLC_LDFLAGS := -nologo
    ADLC_CFLAGS := -nologo -EHsc
    # NOTE: The old build also have -D_CRT_SECURE_NO_DEPRECATE but it doesn't
    # seem needed any more.
    ADLC_CFLAGS_WARNINGS := -W3 -D_CRT_SECURE_NO_WARNINGS
  endif

  # Set the C++ standard if supported
  ADLC_CFLAGS += $(CXXSTD_CXXFLAG)
  
  # NOTE: The old build didn't set -DASSERT for windows but it doesn't seem to
  # hurt.
  ADLC_CFLAGS += -DASSERT

  ADLC_CFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)

  ADLC_CFLAGS += -I$(HOTSPOT_TOPDIR)/src/share/vm

  $(eval $(call SetupNativeCompilation, BUILD_ADLC, \
      TOOLCHAIN := TOOLCHAIN_BUILD_LINK_CXX, \
      SRC := $(HOTSPOT_TOPDIR)/src/share/vm/adlc, \
      EXTRA_FILES := $(HOTSPOT_TOPDIR)/src/share/vm/opto/opcodes.cpp, \
      CFLAGS := $(ADLC_CFLAGS) $(ADLC_CFLAGS_WARNINGS), \
      LDFLAGS := $(ADLC_LDFLAGS), \
      LIBS := $(ADLC_LIBS), \
      OBJECT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc/objs, \
      OUTPUT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc, \
      PROGRAM := adlc, \
      DEBUG_SYMBOLS := false, \
      DISABLED_WARNINGS_clang := tautological-compare, \
      DISABLED_WARNINGS_solstudio := notemsource, \
  ))

  ADLC_TOOL := $(BUILD_ADLC_TARGET)

  ##############################################################################
  # Transform the ad source files into C++ source files using adlc

  # Setup flags for the adlc build tool (ADLCFLAGS).
  ADLCFLAGS += -q -T

  # ADLC flags depending on target OS
  ifeq ($(OPENJDK_TARGET_OS), linux)
    ADLCFLAGS += -DLINUX=1 -D_GNU_SOURCE=1
  else ifeq ($(OPENJDK_TARGET_OS), solaris)
    ADLCFLAGS += -DSOLARIS=1 -DSPARC_WORKS=1
  else ifeq ($(OPENJDK_TARGET_OS), aix)
    ADLCFLAGS += -DAIX=1
  else ifeq ($(OPENJDK_TARGET_OS), macosx)
    ADLCFLAGS += -D_ALLBSD_SOURCE=1 -D_GNU_SOURCE=1
  endif

  ifneq ($(OPENJDK_TARGET_OS), windows)
    # NOTE: Windows adlc flags was different in the old build. Is this really
    # correct?

    # -g makes #line directives in the generated C++ files.
    ADLCFLAGS += -g

    ADLCFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)=1
  endif

  # This generates checks in the generated C++ files that _LP64 is correctly
  # (un)defined when compiling them.
  ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)
    ADLCFLAGS += -D_LP64=1
  else
    ADLCFLAGS += -U_LP64
  endif

  ifeq ($(HOTSPOT_TARGET_CPU_ARCH), arm)
    ADLCFLAGS += -DARM=1
  endif

  ##############################################################################
  # Concatenate all ad source files into a single file, which will be fed to
  # adlc. Also include a #line directive at the start of every included file
  # (after the initial header block), stating the original source file name.
  #
  # Normally, debugging is done directly on the ad_<arch>*.cpp files, but the
  # #line directives in those files will be pointing back to <arch>.ad.

  # AD_SRC_ROOTS might have been added to by a custom extension
  AD_SRC_ROOTS += $(HOTSPOT_TOPDIR)/src

  AD_SRC_FILES := $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \
      $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_CPU).ad \
      $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_CPU_ARCH).ad \
      $d/os_cpu/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH).ad \
    )))

  SINGLE_AD_SRCFILE := $(ADLC_SUPPORT_DIR)/all-ad-src.ad

  INSERT_FILENAME_AWK_SCRIPT := \
      '{ \
         if (CUR_FN != FILENAME) { CUR_FN=FILENAME; NR_BASE=NR-1; need_lineno=1 } \
         if (need_lineno && $$0 !~ /\/\//) \
           { print "\n\n\#line " (NR-NR_BASE) " \"" FILENAME "\""; need_lineno=0 }; \
         print \
       }'

  $(SINGLE_AD_SRCFILE): $(AD_SRC_FILES)
	$(call LogInfo, Preprocessing adlc files $(^F))
	$(call MakeDir, $(@D))
	$(NAWK) $(INSERT_FILENAME_AWK_SCRIPT) $^ > $@

  ##############################################################################
  # Run the adlc tool on the single concatenated ad source file, and store the
  # output in support/adlc for further processing.
  ADLC_RUN_MARKER := $(ADLC_SUPPORT_DIR)/_adlc_run.marker

  $(ADLC_RUN_MARKER): $(BUILD_ADLC) $(SINGLE_AD_SRCFILE)
	$(call LogInfo, Generating adlc files)
	$(call MakeDir, $(@D))
	$(call ExecuteWithLog, $(ADLC_SUPPORT_DIR)/adlc_run, \
	    $(FIXPATH) $(ADLC_TOOL) $(ADLCFLAGS) $(SINGLE_AD_SRCFILE) \
	        -c$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
	        -h$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
	        -a$(ADLC_SUPPORT_DIR)/dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
	        -v$(ADLC_SUPPORT_DIR)/adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp)
	$(TOUCH) $@

  ##############################################################################
  # Finally copy the generated files from support/adlc into gensrc/adfiles,
  # and postprocess them by fixing dummy #line directives.

  ADLC_GENERATED_FILES := $(addprefix $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/, \
      ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_clone.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_expand.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_format.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_gen.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_misc.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_peephole.cpp \
      ad_$(HOTSPOT_TARGET_CPU_ARCH)_pipeline.cpp \
      adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp \
      dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \
  )

  $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/%: $(ADLC_RUN_MARKER)
	$(call LogInfo, Postprocessing adlc file $*)
	$(call MakeDir, $(@D))
	$(NAWK) \
	    'BEGIN { print "#line 1 \"$*\""; } \
	     /^#line 999999$$/ {print "#line " (NR+1) " \"$*\""; next} \
	     {print}' \
	    < $(ADLC_SUPPORT_DIR)/$* > $@

  TARGETS := $(ADLC_GENERATED_FILES)

endif