#
# Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# This must be the first rule
default:
# Inclusion of this pseudo-target will cause make to execute this file
# serially, regardless of -j. Recursively called makefiles will not be
# affected, however. This is required for correct dependency management.
.NOTPARALLEL:
# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make.
# /usr/ccs/bin/make lacks basically every other flow control mechanism.
TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
# Assume we have GNU make, but check version.
ifeq ($(strip $(foreach v, 3.81% 3.82% 4.%, $(filter $v, $(MAKE_VERSION)))), )
$(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
endif
# Locate this Makefile
ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
else
makefile_path:=$(lastword $(MAKEFILE_LIST))
endif
root_dir:=$(dir $(makefile_path))
# ... and then we can include our helper functions
include $(root_dir)/make/MakeHelpers.gmk
$(eval $(call ParseLogLevel))
$(eval $(call ParseConfAndSpec))
# Now determine if we have zero, one or several configurations to build.
ifeq ($(SPEC),)
# Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
else
# In Cygwin, the MAKE variable gets messed up if the make executable is called with
# a Windows mixed path (c:/cygwin/bin/make.exe). If that's the case, fix it by removing
# the prepended root_dir.
ifneq ($(findstring :, $(MAKE)), )
MAKE := $(patsubst $(root_dir)%, %, $(MAKE))
endif
# We are potentially building multiple configurations.
# First, find out the valid targets
# Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
# available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
all_phony_targets := $(sort $(filter-out $(global_targets), $(strip $(shell \
cd $(root_dir)/make && $(MAKE) -f Main.gmk -p -q FRC SPEC=$(firstword $(SPEC)) | \
grep "^.PHONY:" | head -n 1 | cut -d " " -f 2-))))
# Loop through the configurations and call the main-wrapper for each one. The wrapper
# target will execute with a single configuration loaded.
$(all_phony_targets):
@$(if $(TARGET_RUN),,\
$(foreach spec,$(SPEC),\
(cd $(root_dir) && $(MAKE) SPEC=$(spec) MAIN_TARGETS="$(call GetRealTarget)" \
$(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) main-wrapper) &&) true)
@echo > /dev/null
$(eval TARGET_RUN=true)
.PHONY: $(all_phony_targets)
ifneq ($(MAIN_TARGETS), )
# The wrapper target was called so we now have a single configuration. Load the spec file
# and call the real Main.gmk.
include $(SPEC)
### Clean up from previous run
# Remove any build.log from a previous run, if they exist
ifneq (,$(BUILD_LOG))
ifneq (,$(BUILD_LOG_PREVIOUS))
# Rotate old log
$(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
$(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
else
$(shell $(RM) $(BUILD_LOG) 2> /dev/null)
endif
$(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
endif
# Remove any javac server logs and port files. This
# prevents a new make run to reuse the previous servers.
ifneq (,$(SJAVAC_SERVER_DIR))
$(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
endif
main-wrapper:
@$(if $(findstring clean, $(MAIN_TARGETS)), , $(call AtMakeStart))
(cd $(root_dir)/make && $(BUILD_LOG_WRAPPER) $(MAKE) -f Main.gmk SPEC=$(SPEC) -j $(JOBS) \
$(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $(MAIN_TARGETS) \
$(if $(filter true, $(OUTPUT_SYNC_SUPPORTED)), -O$(OUTPUT_SYNC)))
@$(if $(findstring clean, $(MAIN_TARGETS)), , $(call AtMakeEnd))
.PHONY: main-wrapper
endif
endif
# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration.
# If you add more global targets, please update the variable global_targets in MakeHelpers.
help:
$(info )
$(info OpenJDK Makefile help)
$(info =====================)
$(info )
$(info Common make targets)
$(info . make [default] # Compile all modules in langtools, hotspot, jaxp, jaxws,)
$(info . # corba and jdk and create a runnable "exploded" image)
$(info . make all # Compile everything, all repos, docs and images)
$(info . make images # Create complete j2sdk and j2re images)
$(info . make docs # Create all docs)
$(info . make docs-javadoc # Create just javadocs, depends on less than full docs)
$(info . make profiles # Create complete j2re compact profile images)
$(info . make bootcycle-images # Build images twice, second time with newly build JDK)
$(info . make install # Install the generated images locally)
$(info . make clean # Remove all files generated by make, but not those)
$(info . # generated by configure)
$(info . make dist-clean # Remove all files, including configuration)
$(info . make help # Give some help on using make)
$(info . make test # Run tests, default is all tests (see TEST below))
$(info )
$(info Targets for specific modules)
$(info . make <module> # Build <module> and everything it depends on. )
$(info . make <module>-only # Build <module> only, without dependencies. This)
$(info . # is faster but can result in incorrect build results!)
$(info . make <module>-java # Compile java classes for <module> and everything it)
$(info . # depends on)
$(info . make <module>-libs # Build native libraries for <module> and everything it)
$(info . # depends on)
$(info . make <module>-launchers# Build native executables for <module> and everything it)
$(info . # depends on)
$(info . make <module>-gensrc # Execute the gensrc step for <module> and everything it)
$(info . # depends on)
$(info )
$(info Useful make variables)
$(info . make CONF= # Build all configurations (note, assignment is empty))
$(info . make CONF=<substring> # Build the configuration(s) with a name matching)
$(info . # <substring>)
$(info )
$(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>)
$(info . # Available log levels are:)
$(info . # 'warn' (default), 'info', 'debug' and 'trace')
$(info . # To see executed command lines, use LOG=debug)
$(info )
$(info . make JOBS=<n> # Run <n> parallel make jobs)
$(info . # Note that -jN does not work as expected!)
$(info )
$(info . make test TEST=<test> # Only run the given test or tests, e.g.)
$(info . # make test TEST="jdk_lang jdk_net")
$(info )
.PHONY: help