8028198: SIGSEGV in PhaseIdealLoop::build_loop_late_post
Reviewed-by: iveresov, kvn
#!/bin/sh
#
# Copyright (c) 2009, 2012, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
# This file should be used to set the Visual Studio environment
# variables normally set by the vcvars32.bat or vcvars64.bat file or
# SetEnv.cmd for older SDKs.
########################################################################
# Error functions
msg() # message
{
echo "$1" 1>&2
}
error() # message
{
msg "ERROR: $1"
exit 1
}
warning() # message
{
msg "WARNING: $1"
}
envpath() # path
{
if [ "${fixpath}" != "" -a -d "$1" ] ; then
${fixpath} "$1"
else
echo "$1"
fi
}
########################################################################
# Defaults settings
debug="false"
verbose="false"
set -e
CYGWIN="nodosfilewarning ntsec"
export CYGWIN
# pathsepIn is always ; because the input strings are coming from
# vcvarsxx.bat. This is true under all of MKS, Cygwin, MINGW/msys
pathsepIn=';'
OS="`uname -s`"
case "${OS}" in
CYGWIN*)
pathflag='-c'
devnull=/dev/null
pathsepOut=':'
;;
MINGW*)
pathflag='-m'
devnull=/dev/null
pathsepOut=':'
;;
*)
# MKS?
# Continue using dosname -s
pathflag='-s'
fixpath="dosname ${pathflag}"
fixpath_windows="${fixpath}"
fixpath_path="echo"
devnull=NUL
pathsepOut=';'
;;
esac
case "${OS}" in
CYGWIN*|MINGW*)
t=`dirname ${0}`
wd=`cd ${t} 2> ${devnull} && pwd`
fixpath_script="${wd}/fixpath.pl"
if [ ! -f "${fixpath_script}" ] ; then
error "Does not exist: ${fixpath_script}"
fi
fixpath="perl ${fixpath_script} ${pathflag}"
fixpath_windows="perl ${fixpath_script} -d"
fixpath_path="${fixpath_windows}"
;;
esac
shellStyle="sh"
## As far as I can tell from hg history, this has not worked
## for a long time because PPID is unset. When run under Cygwin
## the script quits due to the 1 return from grep.
##parentCsh="` ps -p ${PPID} 2> ${devnull} | grep csh `"
##if [ "${parentCsh}" != "" ] ; then
## shellStyle="csh"
##fi
# Check environment first
if [ "${PROGRAMFILES}" != "" ] ; then
progfiles=`envpath "${PROGRAMFILES}"`
elif [ "${ProgramFiles}" != "" ] ; then
progfiles=`envpath "${ProgramFiles}"`
elif [ "${SYSTEMDRIVE}" != "" ] ; then
progfiles=`envpath "${SYSTEMDRIVE}/Program Files"`
elif [ "${SystemDrive}" != "" ] ; then
progfiles=`envpath "${SystemDrive}/Program Files"`
else
error "No PROGRAMFILES or SYSTEMDRIVE defined in environment"
fi
# Arch data model
if [ "${PROCESSOR_IDENTIFIER}" != "" ] ; then
arch=`echo "${PROCESSOR_IDENTIFIER}" | cut -d' ' -f1`
else
if [ "${MACHTYPE}" != "" ] ; then
if [ "`echo ${MACHTYPE} | grep 64`" != "" ] ; then
# Assume this is X64, not IA64
arch="x64"
else
arch="x86"
fi
else
arch="`uname -m`"
fi
PROCESSOR_IDENTIFIER="${arch}"
export PROCESSOR_IDENTIFIER
fi
if [ "${arch}" = "X86" -o \
"${arch}" = "386" -o "${arch}" = "i386" -o \
"${arch}" = "486" -o "${arch}" = "i486" -o \
"${arch}" = "586" -o "${arch}" = "i586" -o \
"${arch}" = "686" -o "${arch}" = "i686" -o \
"${arch}" = "86" ] ; then
arch="x86"
fi
if [ "${arch}" = "X64" -o \
"${arch}" = "8664" -o "${arch}" = "i8664" -o \
"${arch}" = "amd64" -o "${arch}" = "AMD64" -o \
"${arch}" = "EM64T" -o "${arch}" = "emt64t" -o \
"${arch}" = "intel64" -o "${arch}" = "Intel64" -o \
"${arch}" = "64" ] ; then
arch="x64"
binarch64="\\amd64"
fi
if [ "${arch}" = "IA64" ] ; then
arch="ia64"
binarch64="\\ia64"
fi
if [ "${arch}" != "x86" -a "${arch}" != "x64" -a "${arch}" != "ia64" ] ; then
error "No PROCESSOR_IDENTIFIER or MACHTYPE environment variables and uname -m is not helping"
fi
if [ "${arch}" = "x86" ] ; then
arch_data_model=32
progfiles32="${progfiles}"
progfiles64="${progfiles}"
else
arch_data_model=64
progfiles32="${progfiles}"
if [ "${PROGRAMW6432}" != "" ] ; then
progfiles64=`envpath "${PROGRAMW6432}"`
else
progfiles64=`envpath "C:/Program Files"`
fi
fi
# VS2012 (VC11)
if [ "${VS110COMNTOOLS}" = "" ] ; then
VS110COMNTOOLS="${progfiles32}/Microsoft Visual Studio 11.0/Common7/Tools/"
export VS110COMNTOOLS
fi
vc11Bin32Dir=`envpath "${VS110COMNTOOLS}"`/../../VC/Bin
vc11Bin64Dir="${vc11Bin32Dir}"
vc11vars32Bat="vcvars32.bat"
vc11vars64Bat="vcvars64.bat"
# VS2010 (VC10)
if [ "${VS100COMNTOOLS}" = "" ] ; then
VS100COMNTOOLS="${progfiles32}/Microsoft Visual Studio 10.0/Common7/Tools/"
export VS100COMNTOOLS
fi
vc10Bin32Dir=`envpath "${VS100COMNTOOLS}"`/../../VC/Bin
vc10Bin64Dir="${vc10Bin32Dir}${binarch64}"
vc10vars32Bat="vcvars32.bat"
vc10vars64Bat="vcvars64.bat"
# VS2008 (VC9)
if [ "${VS90COMNTOOLS}" = "" ] ; then
VS90COMNTOOLS="${progfiles32}/Microsoft Visual Studio 9.0/Common7/Tools/"
export VS90COMNTOOLS
fi
vc9Bin32Dir=`envpath "${VS90COMNTOOLS}"`/../../VC/Bin
vc9Bin64Dir="${vc9Bin32Dir}"
vc9vars32Bat="vcvars32.bat"
vc9vars64Bat="vcvars64.bat"
# VS2005 (VC8)
if [ "${VS80COMNTOOLS}" = "" ] ; then
VS80COMNTOOLS="${progfiles32}/Microsoft Visual Studio 8.0/Common7/Tools/"
export VS80COMNTOOLS
fi
vc8Bin32Dir=`envpath "${VS80COMNTOOLS}"`/../../VC/Bin
vc8Bin64Dir="${progfiles64}/Microsoft Platform SDK"
vc8vars32Bat="vcvars32.bat"
vc8vars64Bat="SetEnv.cmd /X64"
# VS2003 (VC7)
if [ "${VS71COMNTOOLS}" = "" ] ; then
VS71COMNTOOLS="${progfiles32}/Microsoft Visual Studio .NET 2003/Common7/Tools/"
export VS71COMNTOOLS
fi
vc7Bin32Dir=`envpath "${VS71COMNTOOLS}"`/../../VC7/Bin
vc7Bin64Dir="${progfiles64}/Microsoft Platform SDK"
vc7vars32Bat="vcvars32.bat"
vc7vars64Bat="SetEnv.cmd /X64"
# Force user to select
vcSelection=""
# Parse options
usage="Usage: $0 [-help] [-debug] [-v] [-c] [-s] [-p] [-v11] [-v10] [-v9] [-v8] [-v7] [-32] [-64]"
while [ $# -gt 0 ] ; do
if [ "$1" = "-help" ] ; then
msg "${usage}"
msg " -help Print out this help message"
msg " -debug Print out extra env variables to help debug this script"
msg " -v Verbose output warns about missing directories"
msg " -c Print out csh style output"
msg " -s Print out sh style output"
msg " -p Print out properties style output"
msg " -v11 Use Visual Studio 11 VS2012"
msg " -v10 Use Visual Studio 10 VS2010"
msg " -v9 Use Visual Studio 9 VS2008"
msg " -v8 Use Visual Studio 8 VS2005"
msg " -v7 Use Visual Studio 7 VS2003"
msg " -32 Force 32bit"
msg " -64 Force 64bit"
exit 0
elif [ "$1" = "-debug" ] ; then
debug="true"
shift
elif [ "$1" = "-v" ] ; then
verbose="true"
shift
elif [ "$1" = "-c" ] ; then
shellStyle="csh"
shift
elif [ "$1" = "-s" ] ; then
shellStyle="sh"
shift
elif [ "$1" = "-p" ] ; then
shellStyle="props"
shift
elif [ "$1" = "-v11" ] ; then
vcBin32Dir="${vc11Bin32Dir}"
vcBin64Dir="${vc11Bin64Dir}"
vcvars32Bat="${vc11vars32Bat}"
vcvars64Bat="${vc11vars64Bat}"
vcSelection="11"
shift
elif [ "$1" = "-v10" ] ; then
vcBin32Dir="${vc10Bin32Dir}"
vcBin64Dir="${vc10Bin64Dir}"
vcvars32Bat="${vc10vars32Bat}"
vcvars64Bat="${vc10vars64Bat}"
vcSelection="10"
shift
elif [ "$1" = "-v9" ] ; then
vcBin32Dir="${vc9Bin32Dir}"
vcBin64Dir="${vc9Bin64Dir}"
vcvars32Bat="${vc9vars32Bat}"
vcvars64Bat="${vc9vars64Bat}"
vcSelection="9"
shift
elif [ "$1" = "-v8" ] ; then
vcBin32Dir="${vc8Bin32Dir}"
vcBin64Dir="${vc8Bin64Dir}"
vcvars32Bat="${vc8vars32Bat}"
vcvars64Bat="${vc8vars64Bat}"
vcSelection="8"
shift
elif [ "$1" = "-v7" ] ; then
vcBin32Dir="${vc7Bin32Dir}"
vcBin64Dir="${vc7Bin64Dir}"
vcvars32Bat="${vc7vars32Bat}"
vcvars64Bat="${vc7vars64Bat}"
vcSelection="7"
shift
elif [ "$1" = "-32" ] ; then
arch_data_model=32
shift
elif [ "$1" = "-64" ] ; then
arch_data_model=64
shift
else
msg "${usage}"
error "Unknown option: $1"
fi
done
# Need to pick
if [ "${vcSelection}" = "" ] ; then
msg "${usage}"
error "You must pick the version"
fi
# Which vcvars bat file to run
if [ "${arch_data_model}" = "32" ] ; then
vcBinDir="${vcBin32Dir}"
vcvarsBat="${vcvars32Bat}"
fi
if [ "${arch_data_model}" = "64" ] ; then
vcBinDir="${vcBin64Dir}"
vcvarsBat="${vcvars64Bat}"
fi
# Do not allow any error returns
set -e
# Different systems have different awk's
if [ -f /usr/bin/nawk ] ; then
awk="nawk"
elif [ -f /usr/bin/gawk ] ; then
awk="gawk"
else
awk="awk"
fi
if [ "${verbose}" = "true" ] ; then
echo "# Welcome to verbose mode"
set -x
fi
if [ "${debug}" = "true" ] ; then
echo "# Welcome to debug mode"
set -x
fi
# Temp file area
tmp="/tmp/vsvars.$$"
rm -f -r ${tmp}
mkdir -p ${tmp}
# Check paths
checkPaths() # var path sep
{
set -e
sep="$3"
checklist="${tmp}/checklist"
printf "%s\n" "$2" | \
sed -e 's@\\@/@g' | \
sed -e 's@//@/@g' | \
${awk} -F"${sep}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \
> ${checklist}
cat ${checklist} | while read orig; do
if [ "${orig}" != "" ] ; then
if [ ! -d "${orig}" ] ; then
warning "Directory in $1 does not exist: ${orig}"
fi
fi
done
}
# Remove all duplicate entries
removeDeadDups() # string sepIn sepOut
{
set -e
sepIn="$2"
sepOut="$3"
pathlist="${tmp}/pathlist"
printf "%s\n" "$1" | \
sed -e 's@\\@/@g' | \
sed -e 's@//@/@g' | \
${awk} -F"${sepIn}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}' \
> ${pathlist}
upaths="${tmp}/upaths"
cat ${pathlist} | while read orig; do
p="${orig}"
if [ "${fixpath}" != "" ] ; then
if [ "${p}" != "" ] ; then
if [ -d "${p}" ] ; then
short=`${fixpath} "${p}"`
if [ "${short}" != "" -a -d "${short}" ] ; then
p="${short}"
fi
echo "${p}" >> ${upaths}
fi
fi
fi
done
newpaths=""
for i in `cat ${upaths}` ; do
# For some reason, \r characters can get into this
i=`echo "${i}" | tr -d '\r' | sed -e 's@/$@@'`
if [ "${newpaths}" = "" ] ; then
newpaths="${i}"
else
newpaths="${newpaths}${sepOut}${i}"
fi
done
printf "%s\n" "${newpaths}" | \
${awk} -F"${sepOut}" \
'{a[$1];printf "%s",$1;for(i=2;i<=NF;i++){if(!($i in a)){a[$i];printf "%s%s",FS,$i;}};printf "\n";}'
}
# Create bat file to process Visual Studio vcvars*.bat files
createBat() # batfile bindir command
{
bat="$1"
bindir="$2"
command="$3"
stdout="${bat}.stdout"
rm -f ${bat} ${stdout}
echo "Output from: ${command}" > ${stdout}
bdir=`envpath "${bindir}"`
cat > ${bat} << EOF
REM Pick the right vcvars bat file
REM Empty these out so we only get the additions we want
set INCLUDE=
set LIB=
set LIBPATH=
set MSVCDIR=
set MSSdk=
set Mstools=
set DevEnvDir=
set VCINSTALLDIR=
set VSINSTALLDIR=
set WindowsSdkDir=
REM Run the vcvars bat file, send all output to stderr
call `${fixpath_windows} ${bdir}`\\${command} > `${fixpath_windows} "${stdout}"`
REM Echo out env var settings
echo VS_VS71COMNTOOLS="%VS71COMNTOOLS%"
echo export VS_VS71COMNTOOLS
echo VS_VS80COMNTOOLS="%VS80COMNTOOLS%"
echo export VS_VS80COMNTOOLS
echo VS_VS90COMNTOOLS="%VS90COMNTOOLS%"
echo export VS_VS90COMNTOOLS
echo VS_VS100COMNTOOLS="%VS100COMNTOOLS%"
echo export VS_VS100COMNTOOLS
echo VS_VS110COMNTOOLS="%VS110COMNTOOLS%"
echo export VS_VS110COMNTOOLS
echo VS_VCINSTALLDIR="%VCINSTALLDIR%"
echo export VS_VCINSTALLDIR
echo VS_VSINSTALLDIR="%VSINSTALLDIR%"
echo export VS_VSINSTALLDIR
echo VS_DEVENVDIR="%DevEnvDir%"
echo export VS_DEVENVDIR
echo VS_MSVCDIR="%MSVCDIR%"
echo export VS_MSVCDIR
echo VS_MSSDK="%MSSdk%"
echo export VS_MSSDK
echo VS_MSTOOLS="%Mstools%"
echo export VS_MSTOOLS
echo VS_WINDOWSSDKDIR="%WindowsSdkDir%"
echo export VS_WINDOWSSDKDIR
echo VS_INCLUDE="%INCLUDE%"
echo export VS_INCLUDE
echo VS_LIB="%LIB%"
echo export VS_LIB
echo VS_LIBPATH="%LIBPATH%"
echo export VS_LIBPATH
echo VS_WPATH="%PATH%"
echo export VS_WPATH
EOF
chmod a+x ${bat}
}
# Create env file
createEnv() # batfile envfile
{
rm -f ${1}.stdout ${1}.temp1 ${1}.temp2
batfile=`${fixpath} ${1}`
cmd.exe -Q -C < "$batfile" 1> ${1}.temp1 2> ${1}.temp2
cat ${1}.temp1 | \
sed -e 's@^Microsoft.*@@' \
-e 's@^.*Copyright.*@@' \
-e 's@^.*>REM.*@@' \
-e 's@^.*>set.*@@' \
-e 's@^.*>echo.*@@' \
-e 's@^.*>call.*@@' \
-e 's@^.*>$@@' \
-e 's@\\@/@g' | \
sed -e 's@//@/@g' > $2
if [ -f "${1}.stdout" ] ; then
cat ${1}.stdout 1>&2
fi
chmod a+x $2
}
printEnv() # name pname vsname val
{
name="$1"
pname="$2"
vsname="$3"
val="$4"
if [ "${val}" != "" ] ; then
if [ "${shellStyle}" = "csh" ] ; then
if [ "${debug}" = "true" ] ; then
echo "setenv ${vsname} \"${val}\";"
fi
echo "setenv ${name} \"${val}\";"
elif [ "${shellStyle}" = "sh" ] ; then
if [ "${debug}" = "true" ] ; then
echo "${vsname}=\"${val}\";"
echo "export ${vsname};"
fi
echo "${name}=\"${val}\";"
echo "export ${name};"
elif [ "${shellStyle}" = "props" ] ; then
echo "vs.${pname}=${val}"
fi
fi
}
#############################################################################
# Get Visual Studio settings
if [ "${fixpath}" != "" ] ; then
# Create bat file to run
batfile="${tmp}/vs-to-env.bat"
if [ ! -d "${vcBinDir}" ] ; then
error "Does not exist: ${vcBinDir}"
elif [ "${vcvarsBat}" = "" ] ; then
error "No vcvars script: ${vcvarsBat}"
else
createBat "${batfile}" "${vcBinDir}" "${vcvarsBat}"
fi
# Run bat file to create environment variable settings
envfile="${tmp}/env.sh"
createEnv "${batfile}" "${envfile}"
# Read in the VS_* settings
. ${envfile}
# Derive unix style path, save old, and define new (remove dups)
VS_UPATH=`${fixpath_path} "${VS_WPATH}"`
export VS_UPATH
VS_OPATH=`printf "%s" "${PATH}" | sed -e 's@\\\\@/@g'`
export VS_OPATH
VS_PATH=`removeDeadDups "${VS_UPATH}${pathsepIn}${VS_OPATH}" "${pathsepIn}" "${pathsepOut}"`
export VS_PATH
fi
# Adjustments due to differences in vcvars*bat files
if [ "${VS_MSVCDIR}" = "" ] ; then
VS_MSVCDIR="${VS_VCINSTALLDIR}"
fi
if [ "${VS_DEVENVDIR}" = "" ] ; then
VS_DEVENVDIR="${VS_VSINSTALLDIR}"
fi
# Print env settings
# env vs.prop vs env value
# ------- ------- ---------- -----
printEnv INCLUDE include VS_INCLUDE "${VS_INCLUDE}"
printEnv LIB lib VS_LIB "${VS_LIB}"
printEnv LIBPATH libpath VS_LIBPATH "${VS_LIBPATH}"
if [ "${debug}" = "true" ] ; then
printEnv UPATH upath VS_UPATH "${VS_UPATH}"
printEnv WPATH wpath VS_WPATH "${VS_WPATH}"
printEnv OPATH opath VS_OPATH "${VS_OPATH}"
fi
printEnv PATH path VS_PATH "${VS_PATH}"
printEnv VCINSTALLDIR vcinstalldir VS_VCINSTALLDIR "${VS_VCINSTALLDIR}"
printEnv VSINSTALLDIR vsinstalldir VS_VSINSTALLDIR "${VS_VSINSTALLDIR}"
printEnv MSVCDIR msvcdir VS_MSVCDIR "${VS_MSVCDIR}"
printEnv MSSDK mssdk VS_MSSDK "${VS_MSSDK}"
printEnv MSTOOLS mstools VS_MSTOOLS "${VS_MSTOOLS}"
printEnv DEVENVDIR devenvdir VS_DEVENVDIR "${VS_DEVENVDIR}"
printEnv WINDOWSSDKDIR windowssdkdir VS_WINDOWSSDKDIR "${VS_WINDOWSSDKDIR}"
if [ "${vcSelection}" = "11" ] ; then
printEnv VS110COMNTOOLS vs110comntools VS_VS110COMNTOOLS "${VS_VS110COMNTOOLS}"
elif [ "${vcSelection}" = "10" ] ; then
printEnv VS100COMNTOOLS vs100comntools VS_VS100COMNTOOLS "${VS_VS100COMNTOOLS}"
elif [ "${vcSelection}" = "9" ] ; then
printEnv VS90COMNTOOLS vs90comntools VS_VS90COMNTOOLS "${VS_VS90COMNTOOLS}"
elif [ "${vcSelection}" = "7" ] ; then
printEnv VS71COMNTOOLS vs71comntools VS_VS71COMNTOOLS "${VS_VS71COMNTOOLS}"
elif [ "${vcSelection}" = "8" ] ; then
printEnv VS80COMNTOOLS vs80comntools VS_VS80COMNTOOLS "${VS_VS80COMNTOOLS}"
fi
# Check final settings
if [ "${verbose}" = "true" ] ; then
checkPaths "Windows PATH" "${VS_WPATH}" ";"
checkPaths LIB "${VS_LIB}" ";"
checkPaths INCLUDE "${VS_INCLUDE}" ";"
checkPaths PATH "${VS_PATH}" "${pathsepIn}"
fi
# Remove all temp files
if [ "${debug}" != "true" ] ; then
rm -f -r ${tmp}
fi
exit 0