6971706: sun/nio/cs/ext/* classes are duplicated between rt.jar, charsets.jar, and localedata.jar
Reviewed-by: ohair
#
# Copyright (c) 1995, 2008, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License version 2 only, as
# published by the Free Software Foundation. Oracle designates this
# particular file as subject to the "Classpath" exception as provided
# by Oracle in the LICENSE file that accompanied this code.
#
# This code is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
# version 2 for more details (a copy is included in the LICENSE file that
# accompanied this code).
#
# You should have received a copy of the GNU General Public License version
# 2 along with this work; if not, write to the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
#
# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
# or visit www.oracle.com if you need additional information or have any
# questions.
#
#
# Common variables used by all the Java makefiles. This file should
# not contain rules.
#
# WARNING: This file is shared with other workspaces.
# So when it includes other files, it must use JDK_TOPDIR.
#
# Check for strange explicit settings (change to empty or true)
ifdef OPENJDK
ifneq ($(OPENJDK),true)
x:=$(error "OPENJDK (if defined) can only be set to true")
endif
endif
#
# On Solaris, the 'make' utility from Sun will not work with these makefiles.
# This little rule is only understood by Sun's make, and is harmless
# when seen by the GNU make tool. If using Sun's make, this causes the
# make command to fail.
#
SUN_MAKE_TEST:sh = echo "ERROR: PLEASE USE GNU VERSION OF MAKE"; exit 33
ifndef JDK_TOPDIR
ifdef BUILDDIR
JDK_TOPDIR=$(BUILDDIR)/..
else
JDK_TOPDIR:=$(error "ERROR: Cannot define top of jdk repository")
endif
endif
ifndef BUILDDIR
# Hack, due to deploy repository using this file.
BUILDDIR=$(JDK_TOPDIR)/make
endif
ifndef JDK_MAKE_SHARED_DIR
JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared
endif
include $(JDK_MAKE_SHARED_DIR)/Platform.gmk
TOPDIR=$(BUILDDIR)/..
include $(JDK_TOPDIR)/make/common/CancelImplicits.gmk
# Historically PLATFORM_SRC used to be src/$(PLATFORM), but we switched it to
# src/solaris so if you want to build on Linux you didn't need a src/linux
# directory. In an ideal world it would be called src/genunix but we are not
# there yet.
#
ifndef SHARE_SRC
SHARE_SRC = $(BUILDDIR)/../src/share
endif
# Files that cannot be included in the OpenJDK distribution are
# collected under a parent directory which contains just those files.
ifndef CLOSED_SRC
CLOSED_SRC = $(BUILDDIR)/../src/closed
endif
# If we have no closed directory, force it to an openjdk build
CLOSED_SRC_DIR_EXISTS := $(shell \
if [ -d $(CLOSED_SRC) ] ; then \
echo true; \
else \
echo false; \
fi)
ifeq ($(CLOSED_SRC_DIR_EXISTS), false)
OPENJDK = true
endif
# Define where closed directories are
ifdef OPENJDK
CLOSED_SRC =
CLOSED_SHARE_SRC =
else
ifndef CLOSED_SHARE_SRC
CLOSED_SHARE_SRC = $(CLOSED_SRC)/share
endif
endif
# If OPENJDK is defined, we may still need to use some native libraries that
# exist only as part of the closed source. If the closed sources are not
# available, the libraries must have been pre-built. Since these libraries
# and the JDK internal interfaces to these are reasonably stable this is not
# a significant problem. But we do need to provide a way to locate them,
# including a way to point to a new one when there have been changes.
#
# If you have a formal binary plugs download, set ALT_BINARY_PLUGS_PATH
# to the location.
# (Optionally you can set ALT_CLOSED_JDK_IMPORT_PATH to point to the latest
# build JDK, or last promotion for this JDK version, but will not work
# on windows).
#
# As the OPENJDK is built, the binary plugs are used instead of building the
# libraries.
# Individual Makefiles that specify USE_BINARY_PLUG_LIBRARY, will get
# the binary plug copy (or a copy from a built JDK).
#
# See common/internal/BinaryPlugs.gmk for more information.
#
# Usage notes:
#
# ALT_BINARY_PLUGS_JARFILE is probably rarely needed. It can be used
# to identify the exact jar file to be used for all closed classes..
#
# ALT_BINARY_PLUGS_PATH points to a directory containing precisely the
# binaries needed to build.
#
# ALT_BUILD_BINARY_PLUGS_PATH points to a directory containing binary plug dirs
# multiple architectures named using the standard conventions
# This is useful for build scripts that need to build multiple architectures
# of the OpenJDK.
#
# ALT_CLOSED_JDK_IMPORT_PATH points to the top-level of a specific platform
# JDK image.
#
# The precedence is that
# 1. ALT_BINARY_PLUGS_JARFILE overrides any other location of the classes
# 2. ALT_BINARY_PLUGS_PATH overrides all locations of classes and libraries
# 3. ALT_BUILD_BINARY_PLUGS_PATH is used to find a ALT_BINARY_PLUGS_PATH
# 4. ALT_CLOSED_JDK_IMPORT_PATH is used to locate classes and libraries
# Note: If any of the ALT_ variables are modified here, it is assumed
# that the build should be done with IMPORT_BINARY_PLUGS=true as
# well. Otherwise the default will be IMPORT_BINARY_PLUGS=false.
# Lastly, setting IMPORT_BINARY_PLUGS=false on the command line
# will override this logic, and plugs will not be imported.
#
# Always needed, defines the name of the imported/exported jarfile
BINARY_PLUGS_JARNAME = rt-closed.jar
ifdef OPENJDK
ifdef ALT_CLOSED_JDK_IMPORT_PATH
CLOSED_JDK_IMPORT_PATH = $(ALT_CLOSED_JDK_IMPORT_PATH)
BINARY_PLUGS_PATH = $(CLOSED_JDK_IMPORT_PATH)
BINARY_PLUGS_JARFILE = $(CLOSED_JDK_IMPORT_PATH)/jre/lib/rt.jar
IMPORT_BINARY_PLUGS=true
endif
ifdef ALT_BUILD_BINARY_PLUGS_PATH
BUILD_BINARY_PLUGS_PATH = $(ALT_BUILD_BINARY_PLUGS_PATH)
IMPORT_BINARY_PLUGS=true
else
BUILD_BINARY_PLUGS_PATH = $(SLASH_JAVA)/re/jdk/$(JDK_VERSION)/promoted/latest/openjdk/binaryplugs
endif
BINARY_PLUGS_PATH = $(BUILD_BINARY_PLUGS_PATH)/$(PLATFORM)-$(ARCH)
BINARY_PLUGS_JARFILE = $(BINARY_PLUGS_PATH)/jre/lib/$(BINARY_PLUGS_JARNAME)
ifdef ALT_BINARY_PLUGS_PATH
BINARY_PLUGS_PATH = $(ALT_BINARY_PLUGS_PATH)
BINARY_PLUGS_JARFILE = $(BINARY_PLUGS_PATH)/jre/lib/$(BINARY_PLUGS_JARNAME)
IMPORT_BINARY_PLUGS=true
endif
ifdef ALT_BINARY_PLUGS_JARFILE
BINARY_PLUGS_JARFILE = $(ALT_BINARY_PLUGS_JARFILE)
IMPORT_BINARY_PLUGS=true
endif
endif # OPENJDK
#
# Get platform definitions
#
include $(JDK_TOPDIR)/make/common/Defs-$(PLATFORM).gmk
#
# Freetype logic is applicable to OpenJDK only
#
ifdef OPENJDK
#if we use system lib we do not need to copy it to build tree
USING_SYSTEM_FT_LIB=false
ifeq ($(PLATFORM), windows)
DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/win32/freetype-$(ARCH)
endif
ifeq ($(PLATFORM), linux)
DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(PLATFORM)/freetype-$(ARCH)
endif
ifeq ($(PLATFORM), solaris)
# historically for Solaris we have slightly different devtools
# naming conventions
DEVTOOLS_FT_DIR=$(JDK_DEVTOOLS_DIR)/$(ARCH_FAMILY)/freetype-$(ARCH)
endif
DEVTOOLS_FT_DIR_EXISTS = $(shell \
if [ -f $(DEVTOOLS_FT_DIR)/include/ft2build.h ] ; then \
echo true; \
else \
echo false; \
fi)
ifdef ALT_FREETYPE_LIB_PATH
FREETYPE_LIB_PATH = $(ALT_FREETYPE_LIB_PATH)
else
ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)
FREETYPE_LIB_PATH = $(DEVTOOLS_FT_DIR)/lib
else
FREETYPE_LIB_PATH = /usr/lib
USING_SYSTEM_FT_LIB=true
endif
endif
ifdef ALT_FREETYPE_HEADERS_PATH
FREETYPE_HEADERS_PATH = $(ALT_FREETYPE_HEADERS_PATH)
else
ifeq ($(DEVTOOLS_FT_DIR_EXISTS), true)
FREETYPE_HEADERS_PATH = $(DEVTOOLS_FT_DIR)/include
else
FREETYPE_HEADERS_PATH = /usr/include
endif
endif
endif
#
# zlib version
#
ZLIB_VERSION = 1.2.3
#
# Localizations for the different parts of the product beyond English
#
JRE_LOCALES = de es fr it ja ko sv zh_CN zh_TW zh_HK
PLUGIN_LOCALES = de es fr it ja ko sv zh_CN zh_TW zh_HK
JDK_LOCALES = ja zh_CN
#
# A list of locales we support but don't have resource files.
# This is defined to optimize the search of resource bundles.
#
JRE_NONEXIST_LOCALES = en en_US de_DE es_ES fr_FR it_IT ja_JP ko_KR sv_SE zh
#
# All libraries except libjava and libjvm itself link against libjvm and
# libjava, the latter for its exported common utilities. libjava only links
# against libjvm. Programs' makefiles take their own responsibility for
# adding other libs.
#
ifdef PACKAGE
# put JAVALIB first, but do not lose any platform specific values....
LDLIBS_COMMON = $(JAVALIB)
endif # PACKAGE
#
# Libraries that must appear ahead of libc.so on the link command line
#
ifdef PROGRAM
ifeq ($(PLATFORM), solaris)
LDLIBS_COMMON = -lthread -ldl
endif
ifeq ($(PLATFORM), linux)
LDLIBS_COMMON = -ldl
endif
endif # PROGRAM
LDLIBS_COMMON += $(EXTRA_LIBS)
#
# Default is to build, not import native binaries
#
ifndef IMPORT_NATIVE_BINARIES
IMPORT_NATIVE_BINARIES=false
endif
# If importing libraries in, no incremental builds
ifeq ($(IMPORT_NATIVE_BINARIES),true)
INCREMENTAL_BUILD=false
endif
# for generated libraries
LIBDIR = $(OUTPUTDIR)/lib
ABS_LIBDIR = $(ABS_OUTPUTDIR)/lib
# Optional place to save the windows .lib files
LIBFILES_DIR = $(OUTPUTDIR)/libfiles
# for ext jre files
EXTDIR = $(LIBDIR)/ext
# for generated include files
INCLUDEDIR = $(OUTPUTDIR)/include
# for generated class files
CLASSBINDIR = $(OUTPUTDIR)/classes
DEMOCLASSDIR = $(OUTPUTDIR)/democlasses
# for modules
MODULES_DIR = $(OUTPUTDIR)/modules
ABS_MODULES_DIR = $(ABS_OUTPUTDIR)/modules
# for generated tool class files
BUILDTOOLCLASSDIR = $(OUTPUTDIR)/btclasses
# for build tool jar files
BUILDTOOLJARDIR = $(OUTPUTDIR)/btjars
ABS_BUILDTOOLJARDIR = $(ABS_OUTPUTDIR)/btjars
# for generated tool class files
BUILDTOOLBINDIR = $(OUTPUTDIR)/btbins
# for generated java source files
GENSRCDIR = $(OUTPUTDIR)/gensrc
# for generated C source files (not javah)
GENNATIVESRCDIR = $(OUTPUTDIR)/gennativesrc
# for imported source files
IMPORTSRCDIR = $(OUTPUTDIR)/impsrc
# for imported documents
IMPORTDOCDIR = $(OUTPUTDIR)/impdoc
# for generated demo
DEMODIR = $(OUTPUTDIR)/demo
# for sample code
SAMPLEDIR = $(OUTPUTDIR)/sample
# for generated documentation
DOCSDIR = $(OUTPUTDIR)/docs$(DOCSDIRSUFFIX)
DOCSDIRSUFFIX =
# The MESSAGE, WARNING and ERROR files are used to store sanityck and
# SCCS check messages, warnings and errors.
ifndef ERROR_FILE
ERROR_FILE = $(OUTPUTDIR)/sanityCheckErrors.txt
endif
ifndef WARNING_FILE
WARNING_FILE = $(OUTPUTDIR)/sanityCheckWarnings.txt
endif
ifndef MESSAGE_FILE
MESSAGE_FILE = $(OUTPUTDIR)/sanityCheckMessages.txt
endif
JDK_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2sdk-image
JRE_IMAGE_DIR = $(ABS_OUTPUTDIR)/j2re-image
#where the demo source can be found
DEMOSRCDIR = $(SHARE_SRC)/demo
# An attempt is made to generate unique enough directories for the
# generated files to not have name collisisons. Most build units
# defines PRODUCT (except Release.gmk), but then they may or may
# not define PACKAGE, THREADIR (only HPI uses this), PROGRAM, and
# LIBRARY. This code chunk attempts to generate a unique
# OBJDIR/CLASSHDRDIR for each build unit based on which of those
# values are set within each build unit.
UNIQUE_LOCATION_STRING = tmp
ifneq ($(PRODUCT),)
UNIQUE_LOCATION_STRING += /$(PRODUCT)
endif
ifneq ($(PACKAGE),)
UNIQUE_LOCATION_STRING += /$(PACKAGE)
endif
ifneq ($(PROGRAM),)
UNIQUE_LOCATION_STRING += /$(PROGRAM)
endif
ifneq ($(LIBRARY),)
ifneq ($(LIBRARY_OUTPUT),)
UNIQUE_LOCATION_STRING += /$(LIBRARY_OUTPUT)
else
UNIQUE_LOCATION_STRING += /$(LIBRARY)
endif
endif
ifneq ($(THREADDIR),)
UNIQUE_LOCATION_STRING += /$(THREADDIR)
endif
#
# Build units may or may not define MODULE. Default to "other".
#
# MODULE variable defines the lowest-level module name that
# might or might not be the name of the modules created in
# the modules build (see make/modules/modules.config and
# modules.group).
#
MODULES_TEMPDIR = $(OUTPUTDIR)/tmp/modules
ABS_MODULES_TEMPDIR = $(ABS_OUTPUTDIR)/tmp/modules
ifndef MODULE
MODULE = other
endif
override MODULE_DEST_DIR = $(MODULES_TEMPDIR)/$(MODULE)
# the use of += above makes a space separated list which we need to
# remove for filespecs.
#
NULLSTRING :=
ONESPACE := $(NULLSTRING) # space before this comment is required.
UNIQUE_PATH = $(subst $(ONESPACE),,$(UNIQUE_LOCATION_STRING))
# TEMPDIR is a unique general purpose directory
# need to use 'override' because GNU Make on Linux exports the wrong
# value.
override TEMPDIR = $(OUTPUTDIR)/$(UNIQUE_PATH)
override ABS_TEMPDIR = $(ABS_OUTPUTDIR)/$(UNIQUE_PATH)
# This must be created right away for pattern rules in Sanity.gmk to work.
dummy1:=$(shell $(MKDIR) -p $(TEMPDIR))
dummy2:=$(shell $(MKDIR) -p $(TEMP_DISK))
# OBJDIRNAME is the name of the directory where the object code is to
# be placed. It's name depends on whether the data model architecture
# is 32-bit or not.
ifneq ($(ARCH_DATA_MODEL), 32)
OBJDIRNAME = obj$(ARCH_DATA_MODEL)$(OBJDIRNAME_SUFFIX)
else
OBJDIRNAME = obj$(OBJDIRNAME_SUFFIX)
endif
OBJDIR = $(TEMPDIR)/$(OBJDIRNAME)
# CLASSHDRDIR is where the generated C Class Header files go.
CLASSHDRDIR = $(TEMPDIR)/CClassHeaders
#
# CLASSDESTDIR can be used to specify the directory where generated classes
# are to be placed. The default is CLASSBINDIR.
#
ifndef CLASSDESTDIR
CLASSDESTDIR = $(CLASSBINDIR)
endif
INCLUDES = -I. -I$(CLASSHDRDIR) \
$(patsubst %,-I%,$(subst $(CLASSPATH_SEPARATOR), ,$(VPATH.h))) $(OTHER_INCLUDES)
OTHER_CPPFLAGS = $(INCLUDES)
#
# vpaths. These are the default locations searched for source files.
# GNUmakefiles of individual areas often override the default settings.
# There are no longer default vpath entries for C and assembler files
# so we can ensure that libraries don't get their hands on JVM files.
#
# We define an intermediate variable for Java files because
# we use its value later to help define $SOURCEPATH
VPATH0.java = $(GENSRCDIR)$(CLASSPATH_SEPARATOR)$(PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/classes
ifdef OPENJDK
VPATH.java = $(VPATH0.java)
else
#
# If filenames are duplicated between open/closed workspaces, prefer
# the closed files.
#
# Source ordering is important: some targets depend on closed files
# replacing open ones, and thus the closed file sources must be found
# before the open ones.
#
# Don't reorder without consulting the teams that depend on this behavior.
#
VPATH.java = $(CLOSED_PLATFORM_SRC)/classes$(CLASSPATH_SEPARATOR)$(CLOSED_SHARE_SRC)/classes$(CLASSPATH_SEPARATOR)$(VPATH0.java)
endif
vpath %.java $(VPATH.java)
vpath %.class $(CLASSBINDIR)
vpath %.$(OBJECT_SUFFIX) $(OBJDIR)
#
# VPATH.h is used elsewhere to generate include flags. By default,
# anyone has access to the include files that the JVM area exports,
# namely jni.h, jvm.h, and jni_utils.h, plus their platform-specific
# relatives.
#
VPATH.h = $(PLATFORM_SRC)/javavm/export$(CLASSPATH_SEPARATOR)$(SHARE_SRC)/javavm/export
vpath %.h $(VPATH.h)
#
# Used in two ways: helps link against libjava.so. Also if overridden
# determines where your shared library is installed.
#
ifndef LIB_LOCATION
LIB_LOCATION = $(LIBDIR)/$(LIBARCH)
endif
#
# Java header and stub variables
#
CLASSHDRS = $(patsubst %,$(CLASSHDRDIR)/%.h,$(subst .,_,$(CLASSES.export)))
CLASSSTUBOBJS = classstubs.$(OBJECT_SUFFIX)
STUBPREAMBLE = $(INCLUDEDIR)/StubPreamble.h
#
# Classpath seen by javac (different from the one seen by the VM
# running javac), and useful variables.
#
SOURCEPATH = $(VPATH.java)
PKG = $(shell $(EXPR) $(PACKAGE) : '\([a-z]*\)')
PKGDIR = $(subst .,/,$(PACKAGE))
#
# The java/javac/jdk variables (JAVAC_CMD, JAVA_CMD, etc.)
#
include $(JDK_MAKE_SHARED_DIR)/Defs-java.gmk
#
# Macros to find the module that $@ belongs to
#
UNIQUE_PATH_PATTERN = $(subst /,.,$(UNIQUE_PATH))
MODULE_PATH_PATTERN = -e 's%.*\/classes\/%classes\/%' \
-e 's%.*\/$(UNIQUE_PATH_PATTERN)\/%classes\/%' \
-e 's%.*\/lib\/%lib\/%' \
-e 's%.*\/bin\/%bin\/%' \
-e 's%.*\/include\/%include\/%' \
-e 's%.*\/demo\/%demo\/%' \
-e 's%.*\/sample\/%sample\/%'
# Install a file to its module
define install-module-file
dest=`echo $(@D)/ | $(SED) $(MODULE_PATH_PATTERN)` ; \
$(MKDIR) -p $(MODULE_DEST_DIR)/$$dest; \
$(CP) -f $@ $(MODULE_DEST_DIR)/$$dest
endef
# Install all files from the directory to its module
define install-module-dir
dest=`echo $(@D)/ | $(SED) $(MODULE_PATH_PATTERN)` ; \
$(MKDIR) -p $(MODULE_DEST_DIR)/$$dest; \
$(CP) -rf $(@D)/* $(MODULE_DEST_DIR)/$$dest
endef
# chmod the file in its module
define chmod-module-file
dest=`echo $@ | $(SED) $(MODULE_PATH_PATTERN)` ; \
$(CHMOD) $1 $(MODULE_DEST_DIR)/$$dest
endef
# install a sym link in its module
define install-module-sym-link
dest=`echo $@ | $(SED) $(MODULE_PATH_PATTERN)` ; \
$(LN) -sf $1 $(MODULE_DEST_DIR)/$$dest
endef
# Run MAKE $@ for a launcher:
# $(call make-launcher, name, mainclass, java-args, main-args)
define make-launcher
$(CD) $(BUILDDIR)/launchers && \
$(MAKE) -f Makefile.launcher \
MODULE=$(MODULE) \
PROGRAM=$(strip $1) \
MAIN_CLASS=$(strip $2) \
MAIN_JAVA_ARGS="$(strip $3)" \
MAIN_ARGS="$(strip $4)"
endef
#
# Convenient macros
#
# Prepare $@ target, remove old one and making sure directory exists
define prep-target
$(MKDIR) -p $(@D)
$(RM) $@
endef
# Simple install of $< file to $@
define install-file
$(prep-target)
$(CP) $< $@
@$(install-module-file)
endef
define chmod-file
$(CHMOD) $1 $@
@$(call chmod-module-file, $1)
endef
define install-sym-link
$(LN) -s $1 $@
@$(call install-module-sym-link, $1)
endef
#
# Marcos for files not belonging to any module
define install-non-module-file
$(prep-target)
$(CP) $< $@
endef
define install-manifest-file
$(install-non-module-file)
endef
# Cleanup rule for after debug java run (hotspot.log file is left around)
# (This could be an old leftover file in a read-only area, use the @- prefix)
HOTSPOT_LOG_NAME = hotspot.log
define java-vm-cleanup
if [ -w $(HOTSPOT_LOG_NAME) ] ; then $(RM) $(HOTSPOT_LOG_NAME); fi
endef
# Current directory
CURRENT_DIRECTORY := $(shell $(PWD))
#
# Create BYFILE OPT and DBG settings, if CFLAGS_OPT/foobar.o is set then it is
# used for this file, otherwise the default settings are used.
#
CFLAGS_$(VARIANT)/BYFILE = $(CFLAGS_$(VARIANT)/$(@F)) \
$(CFLAGS_$(VARIANT)$(CFLAGS_$(VARIANT)/$(@F)))
CXXFLAGS_$(VARIANT)/BYFILE = $(CXXFLAGS_$(VARIANT)/$(@F)) \
$(CXXFLAGS_$(VARIANT)$(CXXFLAGS_$(VARIANT)/$(@F)))
#
# Tool flags
#
ASFLAGS = $(ASFLAGS_$(VARIANT)) $(ASFLAGS_COMMON) $(OTHER_ASFLAGS)
CFLAGS = $(CFLAGS_$(VARIANT)/BYFILE) $(CFLAGS_COMMON) $(OTHER_CFLAGS)
CXXFLAGS = $(CXXFLAGS_$(VARIANT)/BYFILE) $(CXXFLAGS_COMMON) $(OTHER_CXXFLAGS)
CPPFLAGS = $(CPPFLAGS_$(VARIANT)) $(CPPFLAGS_COMMON) $(OTHER_CPPFLAGS) \
$(DEFINES) $(OPTIONS:%=-D%)
LDFLAGS = $(LDFLAGS_$(VARIANT)) $(LDFLAGS_COMMON) $(OTHER_LDFLAGS)
LDLIBS = $(OTHER_LDLIBS) $(LDLIBS_$(VARIANT)) $(LDLIBS_COMMON)
LINTFLAGS = $(LINTFLAGS_$(VARIANT)) $(LINTFLAGS_COMMON) \
$(OTHER_LINTFLAGS)
VERSION_DEFINES = -DRELEASE='"$(RELEASE)"'
# Note: As a rule, GNU Make rules should not appear in any of the
# Defs*.gmk files. These were added for Kestrel-Solaris and do address
# a TeamWare bug. They should be moved elsewhere for Merlin.
#
# Override gnumake built-in rules which do sccs get operations badly.
# (They put the checked out code in the current directory, not in the
# directory of the original file.)
# Since this is a symptom of a teamware failure, complain and die on the spot.
# This message immediately goes to stdout and the build terminates.
define SCCS-trouble
$(error \
"ERROR: File $@ referenced while building in $(CURRENT_DIRECTORY) \
is out of date with respect to its SCCS file $<. \
This can happen from an unresolved Teamware conflict, a file movement, or \
a failure in which SCCS files are updated but the 'sccs get' was not done. \
You should double check for other out of date files in your workspace. \
Or run: cd $(TOPDIR) && $(MAKE) sccs_get")
endef
%:: s.%
@$(SCCS-trouble)
%:: SCCS/s.%
@$(SCCS-trouble)
@$(ECHO) " is out of date with respect to its SCCS file." >> $(WARNING_FILE)
@$(ECHO) " This file may be from an unresolved Teamware conflict." >> $(WARNING_FILE)
@$(ECHO) " This is also a symptom of a Teamware bringover/putback failure" >> $(WARNING_FILE)
@$(ECHO) " in which SCCS files are updated but not checked out." >> $(WARNING_FILE)
@$(ECHO) " Check for other out of date files in your workspace." >> $(WARNING_FILE)
@$(ECHO) "" >> $(WARNING_FILE)
@#exit 666
ifdef INSANE
export INSANE
endif
ifdef ALT_COPYRIGHT_YEAR
COPYRIGHT_YEAR = $(ALT_COPYRIGHT_YEAR)
else
COPYRIGHT_YEAR := $(shell $(DATE) '+%Y')
endif
# Install of imported file (JDK_IMPORT_PATH, or some other external location)
define install-importonly-file
@$(ECHO) "ASSEMBLY_IMPORT: $@"
$(prep-target)
$(CP) $< $@
@if [ "$(PLATFORM)" = "linux" -a "$(@F)" = "libjvm.so" ] ; then \
if [ -x /usr/sbin/selinuxenabled ] ; then \
/usr/sbin/selinuxenabled; \
if [ $$? = 0 ] ; then \
$(ECHO) "/usr/bin/chcon -t textrel_shlib_t $@"; \
/usr/bin/chcon -t textrel_shlib_t $@; \
if [ $$? != 0 ]; then \
echo "ERROR: Cannot chcon $@"; \
fi; \
fi; \
fi; \
fi
endef
define install-import-file
$(install-importonly-file)
@$(install-module-file)
endef
.PHONY: all build clean clobber