--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/jdk/src/share/lib/security/java.security-linux Tue Dec 04 17:40:41 2012 -0500
@@ -0,0 +1,398 @@
+#
+# This is the "master security properties file".
+#
+# An alternate java.security properties file may be specified
+# from the command line via the system property
+#
+# -Djava.security.properties=<URL>
+#
+# This properties file appends to the master security properties file.
+# If both properties files specify values for the same key, the value
+# from the command-line properties file is selected, as it is the last
+# one loaded.
+#
+# Also, if you specify
+#
+# -Djava.security.properties==<URL> (2 equals),
+#
+# then that properties file completely overrides the master security
+# properties file.
+#
+# To disable the ability to specify an additional properties file from
+# the command line, set the key security.overridePropertiesFile
+# to false in the master security properties file. It is set to true
+# by default.
+
+# In this file, various security properties are set for use by
+# java.security classes. This is where users can statically register
+# Cryptography Package Providers ("providers" for short). The term
+# "provider" refers to a package or set of packages that supply a
+# concrete implementation of a subset of the cryptography aspects of
+# the Java Security API. A provider may, for example, implement one or
+# more digital signature algorithms or message digest algorithms.
+#
+# Each provider must implement a subclass of the Provider class.
+# To register a provider in this master security properties file,
+# specify the Provider subclass name and priority in the format
+#
+# security.provider.<n>=<className>
+#
+# This declares a provider, and specifies its preference
+# order n. The preference order is the order in which providers are
+# searched for requested algorithms (when no specific provider is
+# requested). The order is 1-based; 1 is the most preferred, followed
+# by 2, and so on.
+#
+# <className> must specify the subclass of the Provider class whose
+# constructor sets the values of various properties that are required
+# for the Java Security API to look up the algorithms or other
+# facilities implemented by the provider.
+#
+# There must be at least one provider specification in java.security.
+# There is a default provider that comes standard with the JDK. It
+# is called the "SUN" provider, and its Provider subclass
+# named Sun appears in the sun.security.provider package. Thus, the
+# "SUN" provider is registered via the following:
+#
+# security.provider.1=sun.security.provider.Sun
+#
+# (The number 1 is used for the default provider.)
+#
+# Note: Providers can be dynamically registered instead by calls to
+# either the addProvider or insertProviderAt method in the Security
+# class.
+
+#
+# List of providers and their preference orders (see above):
+#
+security.provider.1=sun.security.provider.Sun
+security.provider.2=sun.security.rsa.SunRsaSign
+security.provider.3=sun.security.ec.SunEC
+security.provider.4=com.sun.net.ssl.internal.ssl.Provider
+security.provider.5=com.sun.crypto.provider.SunJCE
+security.provider.6=sun.security.jgss.SunProvider
+security.provider.7=com.sun.security.sasl.Provider
+security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI
+security.provider.9=sun.security.smartcardio.SunPCSC
+
+#
+# Select the source of seed data for SecureRandom. By default an
+# attempt is made to use the entropy gathering device specified by
+# the securerandom.source property. If an exception occurs when
+# accessing the URL then the traditional system/thread activity
+# algorithm is used.
+#
+# On Solaris and Linux systems, if file:/dev/urandom is specified and it
+# exists, a special SecureRandom implementation is activated by default.
+# This "NativePRNG" reads random bytes directly from /dev/urandom.
+#
+# On Windows systems, the URLs file:/dev/random and file:/dev/urandom
+# enables use of the Microsoft CryptoAPI seed functionality.
+#
+securerandom.source=file:/dev/urandom
+#
+# The entropy gathering device is described as a URL and can also
+# be specified with the system property "java.security.egd". For example,
+# -Djava.security.egd=file:/dev/urandom
+# Specifying this system property will override the securerandom.source
+# setting.
+
+#
+# Class to instantiate as the javax.security.auth.login.Configuration
+# provider.
+#
+login.configuration.provider=com.sun.security.auth.login.ConfigFile
+
+#
+# Default login configuration file
+#
+#login.config.url.1=file:${user.home}/.java.login.config
+
+#
+# Class to instantiate as the system Policy. This is the name of the class
+# that will be used as the Policy object.
+#
+policy.provider=sun.security.provider.PolicyFile
+
+# The default is to have a single system-wide policy file,
+# and a policy file in the user's home directory.
+policy.url.1=file:${java.home}/lib/security/java.policy
+policy.url.2=file:${user.home}/.java.policy
+
+# whether or not we expand properties in the policy file
+# if this is set to false, properties (${...}) will not be expanded in policy
+# files.
+policy.expandProperties=true
+
+# whether or not we allow an extra policy to be passed on the command line
+# with -Djava.security.policy=somefile. Comment out this line to disable
+# this feature.
+policy.allowSystemProperty=true
+
+# whether or not we look into the IdentityScope for trusted Identities
+# when encountering a 1.1 signed JAR file. If the identity is found
+# and is trusted, we grant it AllPermission.
+policy.ignoreIdentityScope=false
+
+#
+# Default keystore type.
+#
+keystore.type=jks
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageAccess unless the
+# corresponding RuntimePermission ("accessClassInPackage."+package) has
+# been granted.
+package.access=sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,jdk.internal.
+
+#
+# List of comma-separated packages that start with or equal this string
+# will cause a security exception to be thrown when
+# passed to checkPackageDefinition unless the
+# corresponding RuntimePermission ("defineClassInPackage."+package) has
+# been granted.
+#
+# by default, none of the class loaders supplied with the JDK call
+# checkPackageDefinition.
+#
+package.definition=sun.,com.sun.xml.internal.ws.,com.sun.xml.internal.bind.,com.sun.imageio.,com.sun.org.apache.xerces.internal.utils.,com.sun.org.apache.xalan.internal.utils.,com.sun.org.glassfish.external.,com.sun.org.glassfish.gmbal.,jdk.internal.
+
+#
+# Determines whether this properties file can be appended to
+# or overridden on the command line via -Djava.security.properties
+#
+security.overridePropertiesFile=true
+
+#
+# Determines the default key and trust manager factory algorithms for
+# the javax.net.ssl package.
+#
+ssl.KeyManagerFactory.algorithm=SunX509
+ssl.TrustManagerFactory.algorithm=PKIX
+
+#
+# The Java-level namelookup cache policy for successful lookups:
+#
+# any negative value: caching forever
+# any positive value: the number of seconds to cache an address for
+# zero: do not cache
+#
+# default value is forever (FOREVER). For security reasons, this
+# caching is made forever when a security manager is set. When a security
+# manager is not set, the default behavior in this implementation
+# is to cache for 30 seconds.
+#
+# NOTE: setting this to anything other than the default value can have
+# serious security implications. Do not set it unless
+# you are sure you are not exposed to DNS spoofing attack.
+#
+#networkaddress.cache.ttl=-1
+
+# The Java-level namelookup cache policy for failed lookups:
+#
+# any negative value: cache forever
+# any positive value: the number of seconds to cache negative lookup results
+# zero: do not cache
+#
+# In some Microsoft Windows networking environments that employ
+# the WINS name service in addition to DNS, name service lookups
+# that fail may take a noticeably long time to return (approx. 5 seconds).
+# For this reason the default caching policy is to maintain these
+# results for 10 seconds.
+#
+#
+networkaddress.cache.negative.ttl=10
+
+#
+# Properties to configure OCSP for certificate revocation checking
+#
+
+# Enable OCSP
+#
+# By default, OCSP is not used for certificate revocation checking.
+# This property enables the use of OCSP when set to the value "true".
+#
+# NOTE: SocketPermission is required to connect to an OCSP responder.
+#
+# Example,
+# ocsp.enable=true
+
+#
+# Location of the OCSP responder
+#
+# By default, the location of the OCSP responder is determined implicitly
+# from the certificate being validated. This property explicitly specifies
+# the location of the OCSP responder. The property is used when the
+# Authority Information Access extension (defined in RFC 3280) is absent
+# from the certificate or when it requires overriding.
+#
+# Example,
+# ocsp.responderURL=http://ocsp.example.net:80
+
+#
+# Subject name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. In cases where
+# the subject name alone is not sufficient to uniquely identify the certificate
+# then both the "ocsp.responderCertIssuerName" and
+# "ocsp.responderCertSerialNumber" properties must be used instead. When this
+# property is set then those two properties are ignored.
+#
+# Example,
+# ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"
+
+#
+# Issuer name of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# distinguished name (defined in RFC 2253) which identifies a certificate in
+# the set of certificates supplied during cert path validation. When this
+# property is set then the "ocsp.responderCertSerialNumber" property must also
+# be set. When the "ocsp.responderCertSubjectName" property is set then this
+# property is ignored.
+#
+# Example,
+# ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"
+
+#
+# Serial number of the OCSP responder's certificate
+#
+# By default, the certificate of the OCSP responder is that of the issuer
+# of the certificate being validated. This property identifies the certificate
+# of the OCSP responder when the default does not apply. Its value is a string
+# of hexadecimal digits (colon or space separators may be present) which
+# identifies a certificate in the set of certificates supplied during cert path
+# validation. When this property is set then the "ocsp.responderCertIssuerName"
+# property must also be set. When the "ocsp.responderCertSubjectName" property
+# is set then this property is ignored.
+#
+# Example,
+# ocsp.responderCertSerialNumber=2A:FF:00
+
+#
+# Policy for failed Kerberos KDC lookups:
+#
+# When a KDC is unavailable (network error, service failure, etc), it is
+# put inside a blacklist and accessed less often for future requests. The
+# value (case-insensitive) for this policy can be:
+#
+# tryLast
+# KDCs in the blacklist are always tried after those not on the list.
+#
+# tryLess[:max_retries,timeout]
+# KDCs in the blacklist are still tried by their order in the configuration,
+# but with smaller max_retries and timeout values. max_retries and timeout
+# are optional numerical parameters (default 1 and 5000, which means once
+# and 5 seconds). Please notes that if any of the values defined here is
+# more than what is defined in krb5.conf, it will be ignored.
+#
+# Whenever a KDC is detected as available, it is removed from the blacklist.
+# The blacklist is reset when krb5.conf is reloaded. You can add
+# refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
+# reloaded whenever a JAAS authentication is attempted.
+#
+# Example,
+# krb5.kdc.bad.policy = tryLast
+# krb5.kdc.bad.policy = tryLess:2,2000
+krb5.kdc.bad.policy = tryLast
+
+# Algorithm restrictions for certification path (CertPath) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# for certification path building and validation. For example, "MD2" is
+# generally no longer considered to be a secure hash algorithm. This section
+# describes the mechanism for disabling algorithms based on algorithm name
+# and/or key length. This includes algorithms used in certificates, as well
+# as revocation information such as CRLs and signed OCSP Responses.
+#
+# The syntax of the disabled algorithm string is described as this Java
+# BNF-style:
+# DisabledAlgorithms:
+# " DisabledAlgorithm { , DisabledAlgorithm } "
+#
+# DisabledAlgorithm:
+# AlgorithmName [Constraint]
+#
+# AlgorithmName:
+# (see below)
+#
+# Constraint:
+# KeySizeConstraint
+#
+# KeySizeConstraint:
+# keySize Operator DecimalInteger
+#
+# Operator:
+# <= | < | == | != | >= | >
+#
+# DecimalInteger:
+# DecimalDigits
+#
+# DecimalDigits:
+# DecimalDigit {DecimalDigit}
+#
+# DecimalDigit: one of
+# 1 2 3 4 5 6 7 8 9 0
+#
+# The "AlgorithmName" is the standard algorithm name of the disabled
+# algorithm. See "Java Cryptography Architecture Standard Algorithm Name
+# Documentation" for information about Standard Algorithm Names. Matching
+# is performed using a case-insensitive sub-element matching rule. (For
+# example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
+# "ECDSA" for signatures.) If the assertion "AlgorithmName" is a
+# sub-element of the certificate algorithm name, the algorithm will be
+# rejected during certification path building and validation. For example,
+# the assertion algorithm name "DSA" will disable all certificate algorithms
+# that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion
+# will not disable algorithms related to "ECDSA".
+#
+# A "Constraint" provides further guidance for the algorithm being specified.
+# The "KeySizeConstraint" requires a key of a valid size range if the
+# "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the
+# key size specified in number of bits. For example, "RSA keySize <= 1024"
+# indicates that any RSA key with key size less than or equal to 1024 bits
+# should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates
+# that any RSA key with key size less than 1024 or greater than 2048 should
+# be disabled. Note that the "KeySizeConstraint" only makes sense to key
+# algorithms.
+#
+# Note: This property is currently used by Oracle's PKIX implementation. It
+# is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
+#
+#
+jdk.certpath.disabledAlgorithms=MD2
+
+# Algorithm restrictions for Secure Socket Layer/Transport Layer Security
+# (SSL/TLS) processing
+#
+# In some environments, certain algorithms or key lengths may be undesirable
+# when using SSL/TLS. This section describes the mechanism for disabling
+# algorithms during SSL/TLS security parameters negotiation, including cipher
+# suites selection, peer authentication and key exchange mechanisms.
+#
+# For PKI-based peer authentication and key exchange mechanisms, this list
+# of disabled algorithms will also be checked during certification path
+# building and validation, including algorithms used in certificates, as
+# well as revocation information such as CRLs and signed OCSP Responses.
+# This is in addition to the jdk.certpath.disabledAlgorithms property above.
+#
+# See the specification of "jdk.certpath.disabledAlgorithms" for the
+# syntax of the disabled algorithm string.
+#
+# Note: This property is currently used by Oracle's JSSE implementation.
+# It is not guaranteed to be examined and used by other implementations.
+#
+# Example:
+# jdk.tls.disabledAlgorithms=MD5, SHA1, DSA, RSA keySize < 2048
+