--- a/Makefile Tue Dec 03 10:46:44 2013 -0800
+++ b/Makefile Wed Jul 05 19:24:32 2017 +0200
@@ -1,5 +1,5 @@
#
-# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved.
# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
#
# This code is free software; you can redistribute it and/or modify it
@@ -23,549 +23,112 @@
# questions.
#
-# If NEWBUILD is defined, use the new build-infra Makefiles and configure.
-# See NewMakefile.gmk for more information.
-
-# If not specified, select what the default build is
-ifndef NEWBUILD
- NEWBUILD=true
-endif
-
-ifeq ($(NEWBUILD),true)
-
- # The new top level Makefile
- include NewMakefile.gmk
-
-else # Original Makefile logic
-
-BUILD_PARENT_DIRECTORY=.
+# This must be the first rule
+default:
-# Basename of any originally supplied ALT_OUTPUTDIR directory
-ifndef ORIG_OUTPUTDIR_BASENAME
- ifdef ALT_OUTPUTDIR
- ORIG_OUTPUTDIR_BASENAME := $(shell basename $(ALT_OUTPUTDIR))
- else
- ORIG_OUTPUTDIR_BASENAME = $(PLATFORM)-$(ARCH)
- endif
-endif
-export ORIG_OUTPUTDIR_BASENAME
-
-# The three possible directories created for output (3 build flavors)
-OUTPUTDIR_BASENAME- = $(ORIG_OUTPUTDIR_BASENAME)
-OUTPUTDIR_BASENAME-debug = $(ORIG_OUTPUTDIR_BASENAME)-debug
-OUTPUTDIR_BASENAME-fastdebug = $(ORIG_OUTPUTDIR_BASENAME)-fastdebug
-
-# Relative path to a debug output area
-REL_JDK_OUTPUTDIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))
-
-# The created jdk image directory
-JDK_IMAGE_DIRNAME = j2sdk-image
-JDK_IMAGE_DIR = $(OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
-ABS_JDK_IMAGE_DIR = $(ABS_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
+# Inclusion of this pseudo-target will cause make to execute this file
+# serially, regardless of -j. Recursively called makefiles will not be
+# affected, however. This is required for correct dependency management.
+.NOTPARALLEL:
-# Relative path from an output directory to the image directory
-REL_JDK_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))/$(JDK_IMAGE_DIRNAME)
-REL_JDK_DEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-debug)/$(JDK_IMAGE_DIRNAME)
-REL_JDK_FASTDEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-fastdebug)/$(JDK_IMAGE_DIRNAME)
-
-ifndef TOPDIR
- TOPDIR:=.
-endif
-
-ifndef JDK_TOPDIR
- JDK_TOPDIR=$(TOPDIR)/jdk
-endif
-ifndef JDK_MAKE_SHARED_DIR
- JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared
-endif
-
-default: all
+# The shell code below will be executed on /usr/ccs/bin/make on Solaris, but not in GNU make.
+# /usr/ccs/bin/make lacks basically every other flow control mechanism.
+TEST_FOR_NON_GNUMAKE:sh=echo You are not using GNU make/gmake, this is a requirement. Check your path. 1>&2 && exit 1
-include $(JDK_MAKE_SHARED_DIR)/Defs-control.gmk
-include ./make/Defs-internal.gmk
-include ./make/sanity-rules.gmk
-include ./make/hotspot-rules.gmk
-include ./make/langtools-rules.gmk
-include ./make/corba-rules.gmk
-include ./make/jaxp-rules.gmk
-include ./make/jaxws-rules.gmk
-include ./make/jdk-rules.gmk
-include ./make/nashorn-rules.gmk
-include ./make/install-rules.gmk
-include ./make/sponsors-rules.gmk
-include ./make/deploy-rules.gmk
-
-all:: sanity
-
-ifeq ($(SKIP_FASTDEBUG_BUILD), false)
- all:: fastdebug_build
-endif
-
-ifeq ($(SKIP_DEBUG_BUILD), false)
- all:: debug_build
+# Assume we have GNU make, but check version.
+ifeq ($(strip $(foreach v, 3.81% 3.82% 4.%, $(filter $v, $(MAKE_VERSION)))), )
+ $(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
endif
-all:: all_product_build
-
-all_product_build::
-
-# Everything for a full product build
-ifeq ($(SKIP_PRODUCT_BUILD), false)
-
- all_product_build:: product_build
-
- ifeq ($(BUILD_INSTALL), true)
- all_product_build:: $(INSTALL)
- clobber:: install-clobber
- endif
-
- ifeq ($(BUILD_SPONSORS), true)
- all_product_build:: $(SPONSORS)
- clobber:: sponsors-clobber
- endif
-
- ifneq ($(SKIP_COMPARE_IMAGES), true)
- all_product_build:: compare-image
- endif
-
-endif
-
-define StartTimer
- $(MKDIR) -p $(BUILDTIMESDIR)
- $(RM) $(BUILDTIMESDIR)/build_time_*
- $(call RecordStartTime,TOTAL)
-endef
-
-define StopTimer
- $(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,TOTAL) && $(call ReportBuildTimes,$1),)
-endef
-
-# Generic build of basic repo series
-generic_build_repo_series:: $(SOURCE_TIPS)
- $(MKDIR) -p $(JDK_IMAGE_DIR)
- @$(call StartTimer)
-
-ifeq ($(BUILD_LANGTOOLS), true)
- generic_build_repo_series:: langtools
- clobber:: langtools-clobber
-endif
-
-ifeq ($(BUILD_CORBA), true)
- generic_build_repo_series:: corba
- clobber:: corba-clobber
-endif
-
-ifeq ($(BUILD_JAXP), true)
- generic_build_repo_series:: jaxp
- clobber:: jaxp-clobber
-endif
-
-ifeq ($(BUILD_JAXWS), true)
- generic_build_repo_series:: jaxws
- clobber:: jaxws-clobber
-endif
-
-ifeq ($(BUILD_HOTSPOT), true)
- generic_build_repo_series:: $(HOTSPOT)
- clobber:: hotspot-clobber
+# Locate this Makefile
+ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
+ makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
+else
+ makefile_path:=$(lastword $(MAKEFILE_LIST))
endif
-
-ifeq ($(BUILD_JDK), true)
- generic_build_repo_series:: $(JDK_JAVA_EXE)
- clobber:: jdk-clobber
-endif
+root_dir:=$(dir $(makefile_path))
-ifeq ($(BUILD_NASHORN), true)
- generic_build_repo_series:: $(NASHORN)
- clobber:: nashorn-clobber
-endif
+# ... and then we can include our helper functions
+include $(root_dir)/make/MakeHelpers.gmk
-ifeq ($(BUILD_DEPLOY), true)
- generic_build_repo_series:: $(DEPLOY)
- clobber:: deploy-clobber
-endif
-
-generic_build_repo_series::
- @$(call StopTimer,$(if $(DEBUG_NAME),$(DEBUG_NAME)_build,all_product_build))
+$(eval $(call ParseLogLevel))
+$(eval $(call ParseConfAndSpec))
-# The debug build, fastdebug or debug. Needs special handling.
-# Note that debug builds do NOT do INSTALL steps, but must be done
-# after the product build and before the INSTALL step of the product build.
-#
-# DEBUG_NAME is fastdebug or debug
-# ALT_OUTPUTDIR is changed to have -debug or -fastdebug suffix
-# The resulting image directory (j2sdk-image) is used by the install makefiles
-# to create a debug install bundle jdk-*-debug-** bundle (tar or zip)
-# which will install in the debug or fastdebug subdirectory of the
-# normal product install area.
-# The install process needs to know what the DEBUG_NAME is, so
-# look for INSTALL_DEBUG_NAME in the install rules.
-#
-# NOTE: On windows, do not use $(ABS_BOOTDIR_OUTPUTDIR)-$(DEBUG_NAME).
-# Due to the use of short paths in $(ABS_OUTPUTDIR), this may
-# not be the same location.
-#
+# Now determine if we have zero, one or several configurations to build.
+ifeq ($(SPEC),)
+ # Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
+else
+ ifeq ($(words $(SPEC)),1)
+ # We are building a single configuration. This is the normal case. Execute the Main.gmk file.
+ include $(root_dir)/make/Main.gmk
+ else
+ # We are building multiple configurations.
+ # First, find out the valid targets
+ # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
+ # available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
+ all_phony_targets=$(filter-out $(global_targets) bundles-only, $(strip $(shell \
+ $(MAKE) -p -q -f make/Main.gmk FRC SPEC=$(firstword $(SPEC)) | \
+ grep ^.PHONY: | head -n 1 | cut -d " " -f 2-)))
-# Location of fresh bootdir output
-ABS_BOOTDIR_OUTPUTDIR=$(ABS_OUTPUTDIR)/bootjdk
-FRESH_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)
-FRESH_DEBUG_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(REL_JDK_IMAGE_DIR)
-
-create_fresh_product_bootdir: FRC
- $(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
- GENERATE_DOCS=false \
- BOOT_CYCLE_SETTINGS= \
- build_product_image
+ $(all_phony_targets):
+ @$(foreach spec,$(SPEC),($(MAKE) -f NewMakefile.gmk SPEC=$(spec) \
+ $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $@) &&) true
-create_fresh_debug_bootdir: FRC
- $(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
- GENERATE_DOCS=false \
- BOOT_CYCLE_DEBUG_SETTINGS= \
- build_debug_image
+ .PHONY: $(all_phony_targets)
-create_fresh_fastdebug_bootdir: FRC
- $(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \
- GENERATE_DOCS=false \
- BOOT_CYCLE_DEBUG_SETTINGS= \
- build_fastdebug_image
-
-# Create boot image?
-ifeq ($(SKIP_BOOT_CYCLE),false)
- ifneq ($(PLATFORM)$(ARCH_DATA_MODEL),solaris64)
- DO_BOOT_CYCLE=true
endif
endif
-
-
-ifeq ($(DO_BOOT_CYCLE),true)
-
- # Create the bootdir to use in the build
- product_build:: create_fresh_product_bootdir
- debug_build:: create_fresh_debug_bootdir
- fastdebug_build:: create_fresh_fastdebug_bootdir
-
- # Define variables to be used now for the boot jdk
- BOOT_CYCLE_SETTINGS= \
- ALT_BOOTDIR=$(FRESH_BOOTDIR) \
- ALT_JDK_IMPORT_PATH=$(FRESH_BOOTDIR)
- BOOT_CYCLE_DEBUG_SETTINGS= \
- ALT_BOOTDIR=$(FRESH_DEBUG_BOOTDIR) \
- ALT_JDK_IMPORT_PATH=$(FRESH_DEBUG_BOOTDIR)
-
-else
-
- # Use the supplied ALT_BOOTDIR as the boot
- BOOT_CYCLE_SETTINGS=
- BOOT_CYCLE_DEBUG_SETTINGS=
-
-endif
-
-build_product_image:
- $(MAKE) \
- SKIP_FASTDEBUG_BUILD=true \
- SKIP_DEBUG_BUILD=true \
- $(BOOT_CYCLE_SETTINGS) \
- generic_build_repo_series
-
-# NOTE: On windows, do not use $(ABS_OUTPUTDIR)-$(DEBUG_NAME).
-# Due to the use of short paths in $(ABS_OUTPUTDIR), this may
-# not be the same location.
-
-generic_debug_build:
- $(MAKE) \
- ALT_OUTPUTDIR=$(ABS_OUTPUTDIR)/$(REL_JDK_OUTPUTDIR) \
- DEBUG_NAME=$(DEBUG_NAME) \
- GENERATE_DOCS=false \
- $(BOOT_CYCLE_DEBUG_SETTINGS) \
- generic_build_repo_series
-
-build_debug_image:
- $(MAKE) DEBUG_NAME=debug generic_debug_build
-
-build_fastdebug_image:
- $(MAKE) DEBUG_NAME=fastdebug generic_debug_build
-
-# Build final image
-product_build:: build_product_image
-debug_build:: build_debug_image
-fastdebug_build:: build_fastdebug_image
-
-# The source tips are stored with the relative path to the repo.
-# This file will be used when constructing the jdk image.
-source_tips: $(SOURCE_TIPS)
- $(CAT) $<
-$(SOURCE_TIPS): FRC
- @$(prep-target)
- @$(call GetSourceTips)
-
-clobber:: REPORT_BUILD_TIMES=
-clobber::
- $(RM) -r $(OUTPUTDIR)/*
- -($(RMDIR) -p $(OUTPUTDIR) > $(DEV_NULL) 2>&1; $(TRUE))
-
-clean: clobber
-
-#
-# Dev builds
-#
-
-dev : dev-build
+# Include this after a potential spec file has been included so that the bundles target
+# has access to the spec variables.
+include $(root_dir)/make/Jprt.gmk
-dev-build:
- $(MAKE) DEV_ONLY=true all
-dev-sanity:
- $(MAKE) DEV_ONLY=true sanity
-dev-clobber:
- $(MAKE) DEV_ONLY=true clobber
-
-#
-# Quick jdk verification build
-#
-jdk_only:
- $(MAKE) SKIP_FASTDEBUG_BUILD=true BUILD_HOTSPOT=false all
-
-
-#
-# Quick jdk verification fastdebug build
-#
-jdk_fastdebug_only:
- $(MAKE) DEBUG_NAME=fastdebug BUILD_HOTSPOT=false BUILD_DEPLOY=false \
- BUILD_INSTALL=false BUILD_SPONSORS=false generic_debug_build
-
-#
-# Quick deploy verification fastdebug build
-#
-deploy_fastdebug_only:
- $(MAKE) \
- DEBUG_NAME=fastdebug \
- BUILD_HOTSPOT=false \
- BUILD_JDK=false \
- BUILD_LANGTOOLS=false \
- BUILD_NASHORN=false \
- BUILD_CORBA=false \
- BUILD_JAXP=false \
- BUILD_JAXWS=false \
- BUILD_INSTALL=false \
- BUILD_SPONSORS=false \
- generic_debug_build
-
-#
-# Product build (skip debug builds)
-#
-product_only:
- $(MAKE) SKIP_FASTDEBUG_BUILD=true all
-
-#
-# Check target
-#
-
-check: variable_check
-
-#
-# Help target
-#
-help: intro_help target_help variable_help notes_help examples_help
-
-# Intro help message
-intro_help:
- @$(ECHO) "\
-Makefile for the JDK builds (all the JDK). \n\
-"
-
-# Target help
-target_help:
- @$(ECHO) "\
---- Common Targets --- \n\
-all -- build the core JDK (default target) \n\
-help -- Print out help information \n\
-check -- Check make variable values for correctness \n\
-sanity -- Perform detailed sanity checks on system and settings \n\
-fastdebug_build -- build the core JDK in 'fastdebug' mode (-g -O) \n\
-debug_build -- build the core JDK in 'debug' mode (-g) \n\
-clean -- remove all built and imported files \n\
-clobber -- same as clean \n\
-"
-
-# Variable help (only common ones used by this Makefile)
-variable_help: variable_help_intro variable_list variable_help_end
-variable_help_intro:
- @$(ECHO) "--- Common Variables ---"
-variable_help_end:
- @$(ECHO) " "
+# Here are "global" targets, i.e. targets that can be executed without specifying a single configuration.
+# If you addd more global targets, please update the variable global_targets in MakeHelpers.
-# One line descriptions for the variables
-OUTPUTDIR.desc = Output directory
-PARALLEL_COMPILE_JOBS.desc = Solaris/Linux parallel compile run count
-SLASH_JAVA.desc = Root of all build tools, e.g. /java or J:
-BOOTDIR.desc = JDK used to boot the build
-JDK_IMPORT_PATH.desc = JDK used to import components of the build
-COMPILER_PATH.desc = Compiler install directory
-CACERTS_FILE.desc = Location of certificates file
-DEVTOOLS_PATH.desc = Directory containing zip and gnumake
-CUPS_HEADERS_PATH.desc = Include directory location for CUPS header files
-
-# Make variables to print out (description and value)
-VARIABLE_PRINTVAL_LIST += \
- OUTPUTDIR \
- PARALLEL_COMPILE_JOBS \
- SLASH_JAVA \
- BOOTDIR \
- JDK_IMPORT_PATH \
- COMPILER_PATH \
- CACERTS_FILE \
- DEVTOOLS_PATH
-
-# Make variables that should refer to directories that exist
-VARIABLE_CHECKDIR_LIST += \
- SLASH_JAVA \
- BOOTDIR \
- JDK_IMPORT_PATH \
- COMPILER_PATH \
- DEVTOOLS_PATH
-
-# Make variables that should refer to files that exist
-VARIABLE_CHECKFIL_LIST += \
- CACERTS_FILE
-
-# For pattern rules below, so all are treated the same
-DO_PRINTVAL_LIST=$(VARIABLE_PRINTVAL_LIST:%=%.printval)
-DO_CHECKDIR_LIST=$(VARIABLE_CHECKDIR_LIST:%=%.checkdir)
-DO_CHECKFIL_LIST=$(VARIABLE_CHECKFIL_LIST:%=%.checkfil)
-
-# Complete variable check
-variable_check: $(DO_CHECKDIR_LIST) $(DO_CHECKFIL_LIST)
-variable_list: $(DO_PRINTVAL_LIST) variable_check
-
-# Pattern rule for printing out a variable
-%.printval:
- @$(ECHO) " ALT_$* - $($*.desc)"
- @$(ECHO) " \t $*=$($*)"
-
-# Pattern rule for checking to see if a variable with a directory exists
-%.checkdir:
- @if [ ! -d $($*) ] ; then \
- $(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \
- fi
-
-# Pattern rule for checking to see if a variable with a file exists
-%.checkfil:
- @if [ ! -f $($*) ] ; then \
- $(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \
- fi
-
-# Misc notes on help
-notes_help:
- @$(ECHO) "\
---- Notes --- \n\
-- All builds use same output directory unless overridden with \n\
- \t ALT_OUTPUTDIR=<dir>, changing from product to fastdebug you may want \n\
- \t to use the clean target first. \n\
-- JDK_IMPORT_PATH must refer to a compatible build, not all past promoted \n\
- \t builds or previous release JDK builds will work. \n\
-- The fastest builds have been when the sources and the BOOTDIR are on \n\
- \t local disk. \n\
-"
-
-examples_help:
- @$(ECHO) "\
---- Examples --- \n\
- $(MAKE) fastdebug_build \n\
- $(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\
- $(MAKE) ALT_OUTPUTDIR=/tmp/foobar fastdebug_build \n\
- $(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\
- $(MAKE) ALT_BOOTDIR=/opt/java/jdk1.5.0 \n\
- $(MAKE) ALT_JDK_IMPORT_PATH=/opt/java/jdk1.6.0 \n\
-"
+help:
+ $(info )
+ $(info OpenJDK Makefile help)
+ $(info =====================)
+ $(info )
+ $(info Common make targets)
+ $(info . make [default] # Compile all product in langtools, hotspot, jaxp, jaxws,)
+ $(info . # corba and jdk)
+ $(info . make all # Compile everything, all repos and images)
+ $(info . make images # Create complete j2sdk and j2re images)
+ $(info . make docs # Create javadocs)
+ $(info . make overlay-images # Create limited images for sparc 64 bit platforms)
+ $(info . make profiles # Create complete j2re compact profile images)
+ $(info . make bootcycle-images # Build images twice, second time with newly build JDK)
+ $(info . make install # Install the generated images locally)
+ $(info . make clean # Remove all files generated by make, but not those)
+ $(info . # generated by configure)
+ $(info . make dist-clean # Remove all files, including configuration)
+ $(info . make help # Give some help on using make)
+ $(info . make test # Run tests, default is all tests (see TEST below))
+ $(info )
+ $(info Targets for specific components)
+ $(info (Component is any of langtools, corba, jaxp, jaxws, hotspot, jdk, nashorn, images, overlay-images, docs or test))
+ $(info . make <component> # Build <component> and everything it depends on. )
+ $(info . make <component>-only # Build <component> only, without dependencies. This)
+ $(info . # is faster but can result in incorrect build results!)
+ $(info . make clean-<component> # Remove files generated by make for <component>)
+ $(info )
+ $(info Useful make variables)
+ $(info . make CONF= # Build all configurations (note, assignment is empty))
+ $(info . make CONF=<substring> # Build the configuration(s) with a name matching)
+ $(info . # <substring>)
+ $(info )
+ $(info . make LOG=<loglevel> # Change the log level from warn to <loglevel>)
+ $(info . # Available log levels are:)
+ $(info . # 'warn' (default), 'info', 'debug' and 'trace')
+ $(info . # To see executed command lines, use LOG=debug)
+ $(info )
+ $(info . make JOBS=<n> # Run <n> parallel make jobs)
+ $(info . # Note that -jN does not work as expected!)
+ $(info )
+ $(info . make test TEST=<test> # Only run the given test or tests, e.g.)
+ $(info . # make test TEST="jdk_lang jdk_net")
+ $(info )
-################################################################
-# Source bundling
-################################################################
-ifeq ($(BUNDLE_RULES_AVAILABLE), true)
- include $(BUNDLE_RULES)
-endif
-
-################################################################
-# rule to test
-################################################################
-
-.NOTPARALLEL: test_run
-
-test:
- $(MAKE) test_run
-
-test_run: test_clean test_start test_summary
-
-test_start:
- @$(ECHO) "Tests started at `$(DATE)`"
-
-test_clean:
- $(RM) $(OUTPUTDIR)/test_failures.txt $(OUTPUTDIR)/test_log.txt
-
-test_summary: $(OUTPUTDIR)/test_failures.txt
- @$(ECHO) "#################################################"
- @$(ECHO) "Tests completed at `$(DATE)`"
- @( $(EGREP) '^TEST STATS:' $(OUTPUTDIR)/test_log.txt \
- || $(ECHO) "No TEST STATS seen in log" )
- @$(ECHO) "For complete details see: $(OUTPUTDIR)/test_log.txt"
- @$(ECHO) "#################################################"
- @if [ -s $< ] ; then \
- $(ECHO) "ERROR: Test failure count: `$(CAT) $< | $(WC) -l`"; \
- $(CAT) $<; \
- exit 1; \
- else \
- $(ECHO) "Success! No failures detected"; \
- fi
-
-# Get failure list from log
-$(OUTPUTDIR)/test_failures.txt: $(OUTPUTDIR)/test_log.txt
- @$(RM) $@
- @( $(EGREP) '^FAILED:' $< || $(ECHO) "" ) | $(NAWK) 'length>0' > $@
-
-# Get log file of all tests run
-JDK_TO_TEST := $(shell \
- if [ -d "$(ABS_JDK_IMAGE_DIR)" ] ; then \
- $(ECHO) "$(ABS_JDK_IMAGE_DIR)"; \
- elif [ -d "$(ABS_OUTPUTDIR)/bin" ] ; then \
- $(ECHO) "$(ABS_OUTPUTDIR)"; \
- elif [ "$(PRODUCT_HOME)" != "" -a -d "$(PRODUCT_HOME)/bin" ] ; then \
- $(ECHO) "$(PRODUCT_HOME)"; \
- fi \
-)
-TEST_TARGETS=all
-$(OUTPUTDIR)/test_log.txt:
- $(RM) $@
- ( $(CD) test && \
- $(MAKE) NO_STOPPING=- PRODUCT_HOME=$(JDK_TO_TEST) $(TEST_TARGETS) \
- ) | tee $@
-
-################################################################
-# JPRT rule to build
-################################################################
-
-include ./make/jprt.gmk
-
-################################################################
-# PHONY
-################################################################
-
-.PHONY: all test test_run test_start test_summary test_clean \
- generic_build_repo_series \
- what clobber insane \
- dev dev-build dev-sanity dev-clobber \
- product_build \
- fastdebug_build \
- debug_build \
- build_product_image \
- build_debug_image \
- build_fastdebug_image \
- create_fresh_product_bootdir \
- create_fresh_debug_bootdir \
- create_fresh_fastdebug_bootdir \
- generic_debug_build
-
-# Force target
-FRC:
-
-endif # Original Makefile logic
-
+.PHONY: help