--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/hotspot/test/Makefile Sat Dec 01 00:00:00 2007 +0000
@@ -0,0 +1,239 @@
+#
+# Copyright 2006 Sun Microsystems, Inc. All Rights Reserved.
+# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+#
+# This code is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 only, as
+# published by the Free Software Foundation.
+#
+# This code is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# version 2 for more details (a copy is included in the LICENSE file that
+# accompanied this code).
+#
+# You should have received a copy of the GNU General Public License version
+# 2 along with this work; if not, write to the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,
+# CA 95054 USA or visit www.sun.com if you need additional information or
+# have any questions.
+#
+#
+
+#
+# Makefile to run jtreg
+#
+
+OSNAME = $(shell uname -s)
+ifeq ($(OSNAME), SunOS)
+ PLATFORM = solaris
+ JCT_PLATFORM = solaris
+ ARCH = $(shell uname -p)
+ ifeq ($(ARCH), i386)
+ ARCH=i586
+ endif
+endif
+ifeq ($(OSNAME), Linux)
+ PLATFORM = linux
+ JCT_PLATFORM = linux
+ ARCH = $(shell uname -m)
+ ifeq ($(ARCH), i386)
+ ARCH=i586
+ endif
+endif
+ifeq ($(OSNAME), Windows_NT)
+ PLATFORM = windows
+ JCT_PLATFORM = win32
+ ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),ia64)
+ ARCH=ia64
+ else
+ ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),AMD64)
+ ARCH=x64
+ else
+ ifeq ($(word 1, $(PROCESSOR_IDENTIFIER)),EM64T)
+ ARCH=x64
+ else
+ ARCH=i586
+ endif
+ endif
+ endif
+endif
+
+# Default bundle of all test results (passed or not)
+JPRT_ARCHIVE_BUNDLE=$(TEST_ROOT)/JPRT_ARCHIVE_BUNDLE.zip
+
+# Default home for JTREG
+ifeq ($(PLATFORM), windows)
+ JT_HOME = J:/svc/jct-tools3.2.2_01
+else
+ JT_HOME = /java/svc/jct-tools3.2.2_01
+endif
+
+# Default JTREG to run
+JTREG = $(JT_HOME)/$(JCT_PLATFORM)/bin/jtreg
+
+# Root of this test area
+TEST_ROOT := $(shell pwd)
+
+# Default JDK to test
+JAVA_HOME = $(TEST_ROOT)/../build/$(PLATFORM)-$(ARCH)
+
+# The test directories to run
+DEFAULT_TESTDIRS = serviceability
+TESTDIRS = $(DEFAULT_TESTDIRS)
+
+# Files that hold total passed and failed counts (passed==0 is bad)
+JTREG_TOTALS_DIR = $(TEST_ROOT)/JTREG_TOTALS_$(PLATFORM)_$(ARCH)
+JTREG_FAILED = $(JTREG_TOTALS_DIR)/failed_count
+JTREG_PASSED = $(JTREG_TOTALS_DIR)/passed_count
+
+# Root of all test results
+JTREG_ALL_OUTPUT_DIRNAME = JTREG_OUTPUT_$(PLATFORM)_$(ARCH)
+JTREG_ALL_OUTPUT_DIR = $(TEST_ROOT)/$(JTREG_ALL_OUTPUT_DIRNAME)
+
+# Test results for one test directory
+JTREG_TEST_OUTPUT_DIR = $(JTREG_ALL_OUTPUT_DIR)/$@
+JTREG_TEST_REPORT_DIR = $(JTREG_TEST_OUTPUT_DIR)/JTreport
+JTREG_TEST_WORK_DIR = $(JTREG_TEST_OUTPUT_DIR)/JTwork
+JTREG_TEST_SUMMARY = $(JTREG_TEST_REPORT_DIR)/summary.txt
+
+# Temp files used by this Makefile
+JTREG_TEST_TEMP_DIR = $(JTREG_ALL_OUTPUT_DIR)/$@/temp
+JTREG_TEMP_PASSED = $(JTREG_TEST_TEMP_DIR)/passed
+JTREG_TEMP_FAILED = $(JTREG_TEST_TEMP_DIR)/failed
+JTREG_TEMP_OUTPUT = $(JTREG_TEST_TEMP_DIR)/output
+JTREG_TEMP_RESULTS = $(JTREG_TEST_TEMP_DIR)/results
+
+# JTREG options (different for 2.1.6 and 3.2.2_01)
+JTREG_COMMON_OPTIONS = -r:$(JTREG_TEST_REPORT_DIR) \
+ -w:$(JTREG_TEST_WORK_DIR) \
+ -testjdk:$(JAVA_HOME) \
+ -automatic \
+ -verbose:all
+JTREG_216_OPTIONS = $(JTREG_COMMON_OPTIONS) $@ $(JAVA_ARGS)
+JTREG_322_OPTIONS = $(JTREG_COMMON_OPTIONS) $(JAVA_ARGS:%=-vmoption:%) $@
+
+# Default make rule
+all: clean check tests
+
+# Chaeck to make sure these directories exist
+check: $(JT_HOME) $(JAVA_HOME) $(JTREG)
+
+# Prime the test run
+primecounts: FRC
+ @rm -f -r $(JTREG_TOTALS_DIR)
+ @mkdir -p $(JTREG_TOTALS_DIR)
+ @echo "0" > $(JTREG_FAILED)
+ @echo "0" > $(JTREG_PASSED)
+
+# Run the tests and determine the 'make' command exit status
+# Ultimately we determine the make exit code based on the passed/failed count
+tests: primecounts $(TESTDIRS)
+ @echo "JTREG TOTAL: passed=`cat $(JTREG_PASSED)` failed=`cat $(JTREG_FAILED)`"
+ zip -q -r $(JPRT_ARCHIVE_BUNDLE) $(JTREG_ALL_OUTPUT_DIRNAME)
+ @if [ `cat $(JTREG_FAILED)` -ne 0 -o \
+ `cat $(JTREG_PASSED)` -le 0 ] ; then \
+ echo "JTREG FAILED"; \
+ exit 1; \
+ else \
+ echo "JTREG PASSED"; \
+ exit 0; \
+ fi
+
+# Just make sure these directires exist
+$(JT_HOME) $(JAVA_HOME): FRC
+ @if [ ! -d $@ ] ; then \
+ echo "ERROR: Directory $@ does not exist"; \
+ exit 1; \
+ fi
+
+# Make sure this file exists
+$(JTREG): FRC
+ @if [ ! -f $@ ] ; then \
+ echo "ERROR: File $@ does not exist"; \
+ exit 1; \
+ fi
+
+# Process each test directory one by one, this rule always completes.
+# Note that the use of 'tee' tosses the jtreg process exit status, this
+# is as expected because even if jtreg fails, we need to save the
+# output. So we update the JTREG_PASSED and JTREG_FAILED count files.
+# Note that missing the 'results:' line in the last few lines of output
+# will indicate a failure (or a bump by one of the JTREG_FAILED file.
+# Note that passed: 0 or no passed: indication means a failure.
+# Note that any indication of the word 'failed' indicates failure.
+# Ultimately if the contents of JTREG_FAILED is not 0, we have failed
+# tests, and if the contents of JTREG_PASSED is 0, we consider that a
+# failure.
+$(TESTDIRS): FRC
+ @if [ ! -d $@ ] ; then \
+ echo "ERROR: Directory $@ does not exist"; \
+ exit 1; \
+ fi
+ @echo "---------------------------------------------------"
+ @rm -f -r $(JTREG_TEST_OUTPUT_DIR)
+ @mkdir -p $(JTREG_TEST_OUTPUT_DIR)
+ @mkdir -p $(JTREG_TEST_WORK_DIR)
+ @mkdir -p $(JTREG_TEST_WORK_DIR)/scratch
+ @mkdir -p $(JTREG_TEST_REPORT_DIR)
+ @mkdir -p $(JTREG_TEST_TEMP_DIR)
+ @echo "Testing $@"
+ @echo "Using JAVA_HOME=$(JAVA_HOME)"
+ @echo "Using JAVA_ARGS=$(JAVA_ARGS)"
+ @if [ "`$(JTREG) -help 2>&1 | fgrep -- -vmoption`" != "" ] ; then \
+ echo "Assume we are using jtreg 3.2.2_01 or newer"; \
+ echo "$(JTREG) $(JTREG_322_OPTIONS)"; \
+ $(JTREG) $(JTREG_322_OPTIONS) 2>&1 | tee $(JTREG_TEMP_OUTPUT) ; \
+ else \
+ echo "Assume we are using jtreg 2.1.6"; \
+ echo "$(JTREG) $(JTREG_216_OPTIONS)"; \
+ $(JTREG) $(JTREG_216_OPTIONS) 2>&1 | tee $(JTREG_TEMP_OUTPUT) ; \
+ fi
+ @echo "---------------------------------------------------"
+ @echo "Extracting passed and failed counts from jtreg output"
+ @tail -10 $(JTREG_TEMP_OUTPUT) | fgrep -i 'results:' | \
+ tail -1 | tee $(JTREG_TEMP_RESULTS)
+ @sed -e 's@.*\ passed:\ \([1-9][0-9]*\).*@\1@' $(JTREG_TEMP_RESULTS) \
+ > $(JTREG_TEMP_PASSED)
+ @if [ "`cat $(JTREG_TEMP_PASSED)`" = "" ] ; then \
+ echo "ERROR: No passed indication in results"; \
+ expr `cat $(JTREG_FAILED)` '+' 1 > $(JTREG_FAILED); \
+ elif [ `cat $(JTREG_TEMP_PASSED)` -le 0 ] ; then \
+ echo "ERROR: Passed count appears to be 0"; \
+ expr `cat $(JTREG_FAILED)` '+' 1 > $(JTREG_FAILED); \
+ elif [ "`fgrep -i failed $(JTREG_TEMP_RESULTS)`" = "" ] ; then \
+ echo "No indication anything failed"; \
+ expr `cat $(JTREG_PASSED)` '+' `cat $(JTREG_TEMP_PASSED)` \
+ > $(JTREG_PASSED); \
+ else \
+ sed -e 's@.*\ failed:\ \([1-9][0-9]*\).*@\1@' $(JTREG_TEMP_FAILED) \
+ > $(JTREG_TEMP_FAILED); \
+ if [ "`cat $(JTREG_TEMP_FAILED)`" = "" ] ; then \
+ echo "ERROR: Failed pattern but no failed count in results"; \
+ expr `cat $(JTREG_FAILED)` '+' 1 > $(JTREG_FAILED); \
+ elif [ `cat $(JTREG_TEMP_FAILED)` -le 0 ] ; then \
+ echo "ERROR: Failed count is 0, did something failed or not?"; \
+ expr `cat $(JTREG_FAILED)` '+' 1 > $(JTREG_FAILED); \
+ else \
+ expr `cat $(JTREG_FAILED)` '+' `cat $(JTREG_TEMP_FAILED)` \
+ > $(JTREG_FAILED); \
+ fi; \
+ fi
+ @echo "---------------------------------------------------"
+ @echo "Summary: "
+ @if [ -f $(JTREG_TEST_SUMMARY) ] ; then \
+ cat $(JTREG_TEST_SUMMARY) ; \
+ else \
+ echo "ERROR: Missing $(JTREG_TEST_SUMMARY)"; \
+ fi
+ @echo "---------------------------------------------------"
+
+# Cleanup
+clean:
+ rm -f -r $(JTREG_ALL_OUTPUT_DIR)
+ rm -f $(JPRT_ARCHIVE_BUNDLE)
+
+FRC:
+