/*

 * Copyright (c) 2018, Oracle and/or its affiliates. All rights reserved.

 * Copyright (c) 2018, SAP SE. All rights reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

 * or visit www.oracle.com if you need additional information or have any

 * questions.

 *

 */

#include "precompiled.hpp"

#include "asm/macroAssembler.inline.hpp"

#include "gc/g1/g1BarrierSet.hpp"

#include "gc/g1/g1BarrierSetAssembler.hpp"

#include "gc/g1/g1CardTable.hpp"

#include "gc/g1/g1ThreadLocalData.hpp"

#include "gc/g1/heapRegion.hpp"

#include "interpreter/interp_masm.hpp"

#include "runtime/sharedRuntime.hpp"

#ifdef COMPILER1

#include "c1/c1_LIRAssembler.hpp"

#include "c1/c1_MacroAssembler.hpp"

#include "gc/g1/c1/g1BarrierSetC1.hpp"

#endif

#define __ masm->

void G1BarrierSetAssembler::gen_write_ref_array_pre_barrier(MacroAssembler* masm, DecoratorSet decorators,

                                                            Register from, Register to, Register count,

                                                            Register preserve1, Register preserve2) {

  bool dest_uninitialized = (decorators & AS_DEST_NOT_INITIALIZED) != 0;

  // With G1, don't generate the call if we statically know that the target in uninitialized

  if (!dest_uninitialized) {

    int spill_slots = 3;

    if (preserve1 != noreg) { spill_slots++; }

    if (preserve2 != noreg) { spill_slots++; }

    const int frame_size = align_up(frame::abi_reg_args_size + spill_slots * BytesPerWord, frame::alignment_in_bytes);

    Label filtered;

    // Is marking active?

    if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) {

      __ lwz(R0, in_bytes(G1ThreadLocalData::satb_mark_queue_active_offset()), R16_thread);

    } else {

      guarantee(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption");

      __ lbz(R0, in_bytes(G1ThreadLocalData::satb_mark_queue_active_offset()), R16_thread);

    }

    __ cmpdi(CCR0, R0, 0);

    __ beq(CCR0, filtered);

    __ save_LR_CR(R0);

    __ push_frame(frame_size, R0);

    int slot_nr = 0;

    __ std(from,  frame_size - (++slot_nr) * wordSize, R1_SP);

    __ std(to,    frame_size - (++slot_nr) * wordSize, R1_SP);

    __ std(count, frame_size - (++slot_nr) * wordSize, R1_SP);

    if (preserve1 != noreg) { __ std(preserve1, frame_size - (++slot_nr) * wordSize, R1_SP); }

    if (preserve2 != noreg) { __ std(preserve2, frame_size - (++slot_nr) * wordSize, R1_SP); }

    if (UseCompressedOops) {

      __ call_VM_leaf(CAST_FROM_FN_PTR(address, G1BarrierSet::write_ref_array_pre_narrow_oop_entry), to, count);

    } else {

      __ call_VM_leaf(CAST_FROM_FN_PTR(address, G1BarrierSet::write_ref_array_pre_oop_entry), to, count);

    }

    slot_nr = 0;

    __ ld(from,  frame_size - (++slot_nr) * wordSize, R1_SP);

    __ ld(to,    frame_size - (++slot_nr) * wordSize, R1_SP);

    __ ld(count, frame_size - (++slot_nr) * wordSize, R1_SP);

    if (preserve1 != noreg) { __ ld(preserve1, frame_size - (++slot_nr) * wordSize, R1_SP); }

    if (preserve2 != noreg) { __ ld(preserve2, frame_size - (++slot_nr) * wordSize, R1_SP); }

    __ addi(R1_SP, R1_SP, frame_size); // pop_frame()

    __ restore_LR_CR(R0);

    __ bind(filtered);

  }

}

void G1BarrierSetAssembler::gen_write_ref_array_post_barrier(MacroAssembler* masm, DecoratorSet decorators,

                                                             Register addr, Register count, Register preserve) {

  int spill_slots = (preserve != noreg) ? 1 : 0;

  const int frame_size = align_up(frame::abi_reg_args_size + spill_slots * BytesPerWord, frame::alignment_in_bytes);

  __ save_LR_CR(R0);

  __ push_frame(frame_size, R0);

  if (preserve != noreg) { __ std(preserve, frame_size - 1 * wordSize, R1_SP); }

  __ call_VM_leaf(CAST_FROM_FN_PTR(address, G1BarrierSet::write_ref_array_post_entry), addr, count);

  if (preserve != noreg) { __ ld(preserve, frame_size - 1 * wordSize, R1_SP); }

  __ addi(R1_SP, R1_SP, frame_size); // pop_frame();

  __ restore_LR_CR(R0);

}

void G1BarrierSetAssembler::g1_write_barrier_pre(MacroAssembler* masm, DecoratorSet decorators, Register obj, RegisterOrConstant ind_or_offs, Register pre_val,

                                                 Register tmp1, Register tmp2, bool needs_frame) {

  bool not_null  = (decorators & OOP_NOT_NULL) != 0,

       preloaded = obj == noreg;

  Register nv_save = noreg;

  if (preloaded) {

    // We are not loading the previous value so make

    // sure that we don't trash the value in pre_val

    // with the code below.

    assert_different_registers(pre_val, tmp1, tmp2);

    if (pre_val->is_volatile()) {

      nv_save = !tmp1->is_volatile() ? tmp1 : tmp2;

      assert(!nv_save->is_volatile(), "need one nv temp register if pre_val lives in volatile register");

    }

  }

  Label runtime, filtered;

  // Is marking active?

  if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) {

    __ lwz(tmp1, in_bytes(G1ThreadLocalData::satb_mark_queue_active_offset()), R16_thread);

  } else {

    guarantee(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption");

    __ lbz(tmp1, in_bytes(G1ThreadLocalData::satb_mark_queue_active_offset()), R16_thread);

  }

  __ cmpdi(CCR0, tmp1, 0);

  __ beq(CCR0, filtered);

  // Do we need to load the previous value?

  if (!preloaded) {

    // Load the previous value...

    if (UseCompressedOops) {

      __ lwz(pre_val, ind_or_offs, obj);

    } else {

      __ ld(pre_val, ind_or_offs, obj);

    }

    // Previous value has been loaded into Rpre_val.

  }

  assert(pre_val != noreg, "must have a real register");

  // Is the previous value null?

  if (preloaded && not_null) {

#ifdef ASSERT

    __ cmpdi(CCR0, pre_val, 0);

    __ asm_assert_ne("null oop not allowed (G1 pre)", 0x321); // Checked by caller.

#endif

  } else {

    __ cmpdi(CCR0, pre_val, 0);

    __ beq(CCR0, filtered);

  }

  if (!preloaded && UseCompressedOops) {

    __ decode_heap_oop_not_null(pre_val);

  }

  // OK, it's not filtered, so we'll need to call enqueue. In the normal

  // case, pre_val will be a scratch G-reg, but there are some cases in

  // which it's an O-reg. In the first case, do a normal call. In the

  // latter, do a save here and call the frameless version.

  // Can we store original value in the thread's buffer?

  // Is index == 0?

  // (The index field is typed as size_t.)

  const Register Rbuffer = tmp1, Rindex = tmp2;

  __ ld(Rindex, in_bytes(G1ThreadLocalData::satb_mark_queue_index_offset()), R16_thread);

  __ cmpdi(CCR0, Rindex, 0);

  __ beq(CCR0, runtime); // If index == 0, goto runtime.

  __ ld(Rbuffer, in_bytes(G1ThreadLocalData::satb_mark_queue_buffer_offset()), R16_thread);

  __ addi(Rindex, Rindex, -wordSize); // Decrement index.

  __ std(Rindex, in_bytes(G1ThreadLocalData::satb_mark_queue_index_offset()), R16_thread);

  // Record the previous value.

  __ stdx(pre_val, Rbuffer, Rindex);

  __ b(filtered);

  __ bind(runtime);

  // May need to preserve LR. Also needed if current frame is not compatible with C calling convention.

  if (needs_frame) {

    __ save_LR_CR(tmp1);

    __ push_frame_reg_args(0, tmp2);

  }

  if (pre_val->is_volatile() && preloaded) { __ mr(nv_save, pre_val); } // Save pre_val across C call if it was preloaded.

  __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_pre), pre_val, R16_thread);

  if (pre_val->is_volatile() && preloaded) { __ mr(pre_val, nv_save); } // restore

  if (needs_frame) {

    __ pop_frame();

    __ restore_LR_CR(tmp1);

  }

  __ bind(filtered);

}

void G1BarrierSetAssembler::g1_write_barrier_post(MacroAssembler* masm, DecoratorSet decorators, Register store_addr, Register new_val,

                                                  Register tmp1, Register tmp2, Register tmp3) {

  bool not_null = (decorators & OOP_NOT_NULL) != 0;

  Label runtime, filtered;

  assert_different_registers(store_addr, new_val, tmp1, tmp2);

  CardTableBarrierSet* ct = barrier_set_cast<CardTableBarrierSet>(BarrierSet::barrier_set());

  assert(sizeof(*ct->card_table()->byte_map_base()) == sizeof(jbyte), "adjust this code");

  // Does store cross heap regions?

  if (G1RSBarrierRegionFilter) {

    __ xorr(tmp1, store_addr, new_val);

    __ srdi_(tmp1, tmp1, HeapRegion::LogOfHRGrainBytes);

    __ beq(CCR0, filtered);

  }

  // Crosses regions, storing NULL?

  if (not_null) {

#ifdef ASSERT

    __ cmpdi(CCR0, new_val, 0);

    __ asm_assert_ne("null oop not allowed (G1 post)", 0x322); // Checked by caller.

#endif

  } else {

    __ cmpdi(CCR0, new_val, 0);

    __ beq(CCR0, filtered);

  }

  // Storing region crossing non-NULL, is card already dirty?

  const Register Rcard_addr = tmp1;

  Register Rbase = tmp2;

  __ load_const_optimized(Rbase, (address)(ct->card_table()->byte_map_base()), /*temp*/ tmp3);

  __ srdi(Rcard_addr, store_addr, CardTable::card_shift);

  // Get the address of the card.

  __ lbzx(/*card value*/ tmp3, Rbase, Rcard_addr);

  __ cmpwi(CCR0, tmp3, (int)G1CardTable::g1_young_card_val());

  __ beq(CCR0, filtered);

  __ membar(Assembler::StoreLoad);

  __ lbzx(/*card value*/ tmp3, Rbase, Rcard_addr);  // Reload after membar.

  __ cmpwi(CCR0, tmp3 /* card value */, (int)G1CardTable::dirty_card_val());

  __ beq(CCR0, filtered);

  // Storing a region crossing, non-NULL oop, card is clean.

  // Dirty card and log.

  __ li(tmp3, (int)G1CardTable::dirty_card_val());

  //release(); // G1: oops are allowed to get visible after dirty marking.

  __ stbx(tmp3, Rbase, Rcard_addr);

  __ add(Rcard_addr, Rbase, Rcard_addr); // This is the address which needs to get enqueued.

  Rbase = noreg; // end of lifetime

  const Register Rqueue_index = tmp2,

                 Rqueue_buf   = tmp3;

  __ ld(Rqueue_index, in_bytes(G1ThreadLocalData::dirty_card_queue_index_offset()), R16_thread);

  __ cmpdi(CCR0, Rqueue_index, 0);

  __ beq(CCR0, runtime); // index == 0 then jump to runtime

  __ ld(Rqueue_buf, in_bytes(G1ThreadLocalData::dirty_card_queue_buffer_offset()), R16_thread);

  __ addi(Rqueue_index, Rqueue_index, -wordSize); // decrement index

  __ std(Rqueue_index, in_bytes(G1ThreadLocalData::dirty_card_queue_index_offset()), R16_thread);

  __ stdx(Rcard_addr, Rqueue_buf, Rqueue_index); // store card

  __ b(filtered);

  __ bind(runtime);

  // Save the live input values.

  __ call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::g1_wb_post), Rcard_addr, R16_thread);

  __ bind(filtered);

}

void G1BarrierSetAssembler::oop_store_at(MacroAssembler* masm, DecoratorSet decorators, BasicType type,

                                       Register base, RegisterOrConstant ind_or_offs, Register val,

                                       Register tmp1, Register tmp2, Register tmp3, bool needs_frame) {

  bool on_array = (decorators & IN_HEAP_ARRAY) != 0;

  bool on_anonymous = (decorators & ON_UNKNOWN_OOP_REF) != 0;

  bool precise = on_array || on_anonymous;

  // Load and record the previous value.

  g1_write_barrier_pre(masm, decorators, base, ind_or_offs,

                       tmp1, tmp2, tmp3, needs_frame);

  BarrierSetAssembler::store_at(masm, decorators, type, base, ind_or_offs, val, tmp1, tmp2, tmp3, needs_frame);

  // No need for post barrier if storing NULL

  if (val != noreg) {

    if (precise) {

      if (ind_or_offs.is_constant()) {

        __ add_const_optimized(base, base, ind_or_offs.as_constant(), tmp1);

      } else {

        __ add(base, ind_or_offs.as_register(), base);

      }

    }

    g1_write_barrier_post(masm, decorators, base, val, tmp1, tmp2, tmp3);

  }

}

void G1BarrierSetAssembler::load_at(MacroAssembler* masm, DecoratorSet decorators, BasicType type,

                                    Register base, RegisterOrConstant ind_or_offs, Register dst,

  bool on_oop = type == T_OBJECT || type == T_ARRAY;

  bool on_weak = (decorators & ON_WEAK_OOP_REF) != 0;

  bool on_phantom = (decorators & ON_PHANTOM_OOP_REF) != 0;

  bool on_reference = on_weak || on_phantom;

  Label done;

  // Load the value of the referent field.

  if (on_oop && on_reference) {

    // Generate the G1 pre-barrier code to log the value of

    // the referent field in an SATB buffer. Note with

    // these parameters the pre-barrier does not generate

    // the load of the previous value

    // We only reach here if value is not null.

    g1_write_barrier_pre(masm, decorators | OOP_NOT_NULL, noreg /* obj */, (intptr_t)0, dst /* pre_val */,

                         tmp1, tmp2, needs_frame);

  }

  __ bind(done);

}

void G1BarrierSetAssembler::resolve_jobject(MacroAssembler* masm, Register value, Register tmp1, Register tmp2, bool needs_frame) {

  Label done, not_weak;

  __ cmpdi(CCR0, value, 0);

  __ beq(CCR0, done);         // Use NULL as-is.

  __ clrrdi(tmp1, value, JNIHandles::weak_tag_size);

  __ andi_(tmp2, value, JNIHandles::weak_tag_mask);

  __ ld(value, 0, tmp1);      // Resolve (untagged) jobject.

  __ beq(CCR0, not_weak);     // Test for jweak tag.

  __ verify_oop(value);

  g1_write_barrier_pre(masm, IN_ROOT | ON_PHANTOM_OOP_REF,

                       noreg, noreg, value,

                       tmp1, tmp2, needs_frame);

  __ bind(not_weak);

  __ verify_oop(value);

  __ bind(done);

}

#ifdef COMPILER1

#undef __

#define __ ce->masm()->

void G1BarrierSetAssembler::gen_pre_barrier_stub(LIR_Assembler* ce, G1PreBarrierStub* stub) {

  G1BarrierSetC1* bs = (G1BarrierSetC1*)BarrierSet::barrier_set()->barrier_set_c1();

  // At this point we know that marking is in progress.

  // If do_load() is true then we have to emit the

  // load of the previous value; otherwise it has already

  // been loaded into _pre_val.

  __ bind(*stub->entry());

  assert(stub->pre_val()->is_register(), "Precondition.");

  Register pre_val_reg = stub->pre_val()->as_register();

  if (stub->do_load()) {

    ce->mem2reg(stub->addr(), stub->pre_val(), T_OBJECT, stub->patch_code(), stub->info(), false /*wide*/, false /*unaligned*/);

  }

  __ cmpdi(CCR0, pre_val_reg, 0);

  __ bc_far_optimized(Assembler::bcondCRbiIs1, __ bi0(CCR0, Assembler::equal), *stub->continuation());

  address c_code = bs->pre_barrier_c1_runtime_code_blob()->code_begin();

  //__ load_const_optimized(R0, c_code);

  __ add_const_optimized(R0, R29_TOC, MacroAssembler::offset_to_global_toc(c_code));

  __ std(pre_val_reg, -8, R1_SP); // Pass pre_val on stack.

  __ mtctr(R0);

  __ bctrl();

  __ b(*stub->continuation());

}

void G1BarrierSetAssembler::gen_post_barrier_stub(LIR_Assembler* ce, G1PostBarrierStub* stub) {

  G1BarrierSetC1* bs = (G1BarrierSetC1*)BarrierSet::barrier_set()->barrier_set_c1();

  __ bind(*stub->entry());

  assert(stub->addr()->is_register(), "Precondition.");

  assert(stub->new_val()->is_register(), "Precondition.");

  Register addr_reg = stub->addr()->as_pointer_register();

  Register new_val_reg = stub->new_val()->as_register();

  __ cmpdi(CCR0, new_val_reg, 0);

  __ bc_far_optimized(Assembler::bcondCRbiIs1, __ bi0(CCR0, Assembler::equal), *stub->continuation());

  address c_code = bs->post_barrier_c1_runtime_code_blob()->code_begin();

  //__ load_const_optimized(R0, c_code);

  __ add_const_optimized(R0, R29_TOC, MacroAssembler::offset_to_global_toc(c_code));

  __ mtctr(R0);

  __ mr(R0, addr_reg); // Pass addr in R0.

  __ bctrl();

  __ b(*stub->continuation());

}

#undef __

#define __ sasm->

void G1BarrierSetAssembler::generate_c1_pre_barrier_runtime_stub(StubAssembler* sasm) {

  BarrierSet* bs = BarrierSet::barrier_set();

  __ set_info("g1_pre_barrier_slow_id", false);

  // Using stack slots: pre_val (pre-pushed), spill tmp, spill tmp2.

  const int stack_slots = 3;

  Register pre_val = R0; // previous value of memory

  Register tmp  = R14;

  Register tmp2 = R15;

  Label refill, restart, marking_not_active;

  int satb_q_active_byte_offset = in_bytes(G1ThreadLocalData::satb_mark_queue_active_offset());

  int satb_q_index_byte_offset = in_bytes(G1ThreadLocalData::satb_mark_queue_index_offset());

  int satb_q_buf_byte_offset = in_bytes(G1ThreadLocalData::satb_mark_queue_buffer_offset());

  // Spill

  __ std(tmp, -16, R1_SP);

  __ std(tmp2, -24, R1_SP);

  // Is marking still active?

  if (in_bytes(SATBMarkQueue::byte_width_of_active()) == 4) {

    __ lwz(tmp, satb_q_active_byte_offset, R16_thread);

  } else {

    assert(in_bytes(SATBMarkQueue::byte_width_of_active()) == 1, "Assumption");

    __ lbz(tmp, satb_q_active_byte_offset, R16_thread);

  }

  __ cmpdi(CCR0, tmp, 0);

  __ beq(CCR0, marking_not_active);

  __ bind(restart);

  // Load the index into the SATB buffer. SATBMarkQueue::_index is a

  // size_t so ld_ptr is appropriate.

  __ ld(tmp, satb_q_index_byte_offset, R16_thread);

  // index == 0?

  __ cmpdi(CCR0, tmp, 0);

  __ beq(CCR0, refill);

  __ ld(tmp2, satb_q_buf_byte_offset, R16_thread);

  __ ld(pre_val, -8, R1_SP); // Load from stack.

  __ addi(tmp, tmp, -oopSize);

  __ std(tmp, satb_q_index_byte_offset, R16_thread);

  __ stdx(pre_val, tmp2, tmp); // [_buf + index] := <address_of_card>

  __ bind(marking_not_active);

  // Restore temp registers and return-from-leaf.

  __ ld(tmp2, -24, R1_SP);

  __ ld(tmp, -16, R1_SP);

  __ blr();

  __ bind(refill);

  const int nbytes_save = (MacroAssembler::num_volatile_regs + stack_slots) * BytesPerWord;

  __ save_volatile_gprs(R1_SP, -nbytes_save); // except R0

  __ mflr(R0);

  __ std(R0, _abi(lr), R1_SP);

  __ push_frame_reg_args(nbytes_save, R0); // dummy frame for C call

  __ call_VM_leaf(CAST_FROM_FN_PTR(address, SATBMarkQueueSet::handle_zero_index_for_thread), R16_thread);

  __ pop_frame();

  __ ld(R0, _abi(lr), R1_SP);

  __ mtlr(R0);

  __ restore_volatile_gprs(R1_SP, -nbytes_save); // except R0

  __ b(restart);

}

void G1BarrierSetAssembler::generate_c1_post_barrier_runtime_stub(StubAssembler* sasm) {

  G1BarrierSet* bs = barrier_set_cast<G1BarrierSet>(BarrierSet::barrier_set());

  __ set_info("g1_post_barrier_slow_id", false);

  // Using stack slots: spill addr, spill tmp2

  const int stack_slots = 2;

  Register tmp = R0;

  Register addr = R14;

  Register tmp2 = R15;

  jbyte* byte_map_base = bs->card_table()->byte_map_base();

  Label restart, refill, ret;

  // Spill

  __ std(addr, -8, R1_SP);

  __ std(tmp2, -16, R1_SP);

  __ srdi(addr, R0, CardTable::card_shift); // Addr is passed in R0.

  __ load_const_optimized(/*cardtable*/ tmp2, byte_map_base, tmp);

  __ add(addr, tmp2, addr);

  __ lbz(tmp, 0, addr); // tmp := [addr + cardtable]

  // Return if young card.

  __ cmpwi(CCR0, tmp, G1CardTable::g1_young_card_val());

  __ beq(CCR0, ret);

  // Return if sequential consistent value is already dirty.

  __ membar(Assembler::StoreLoad);

  __ lbz(tmp, 0, addr); // tmp := [addr + cardtable]