#

# Copyright (c) 2013, 2016, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

$(eval $(call IncludeCustomExtension, hotspot, gensrc/GensrcAdlc.gmk))

ifeq ($(call check-jvm-feature, compiler2), true)

  ADLC_SUPPORT_DIR := $(JVM_SUPPORT_DIR)/adlc

  ##############################################################################

  # Build the ad compiler (the adlc build tool)

  # Flags depending on the build platform/tool chain

  # NOTE: No optimization or debug flags set here

  ifeq ($(OPENJDK_BUILD_OS), linux)

    ADLC_CFLAGS := -fno-exceptions -DLINUX

  else ifeq ($(OPENJDK_BUILD_OS), solaris)

    ADLC_LDFLAGS := -m64

    ADLC_CFLAGS := -m64

    ADLC_CFLAGS_WARNINGS := +w

  else ifeq ($(OPENJDK_BUILD_OS), aix)

    ADLC_LDFLAGS := -q64

    ADLC_CFLAGS := -qnortti -qeh -q64 -DAIX

  else ifeq ($(OPENJDK_BUILD_OS), windows)

    ADLC_LDFLAGS := -nologo

    ADLC_CFLAGS := -nologo -EHsc

    # NOTE: The old build also have -D_CRT_SECURE_NO_DEPRECATE but it doesn't

    # seem needed any more.

    ADLC_CFLAGS_WARNINGS := -W3 -D_CRT_SECURE_NO_WARNINGS

  endif

  # Set the C++ standard if supported

  ADLC_CFLAGS += $(CXXSTD_CXXFLAG)

  # NOTE: The old build didn't set -DASSERT for windows but it doesn't seem to

  # hurt.

  ADLC_CFLAGS += -DASSERT

  ADLC_CFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)

  ADLC_CFLAGS += -I$(HOTSPOT_TOPDIR)/src/share/vm

  $(eval $(call SetupNativeCompilation, BUILD_ADLC, \

      TOOLCHAIN := TOOLCHAIN_BUILD_LINK_CXX, \

      SRC := $(HOTSPOT_TOPDIR)/src/share/vm/adlc, \

      EXTRA_FILES := $(HOTSPOT_TOPDIR)/src/share/vm/opto/opcodes.cpp, \

      CFLAGS := $(ADLC_CFLAGS) $(ADLC_CFLAGS_WARNINGS), \

      LDFLAGS := $(ADLC_LDFLAGS), \

      LIBS := $(ADLC_LIBS), \

      OBJECT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc/objs, \

      OUTPUT_DIR := $(JVM_VARIANT_OUTPUTDIR)/tools/adlc, \

      PROGRAM := adlc, \

      DEBUG_SYMBOLS := false, \

      DISABLED_WARNINGS_clang := parentheses tautological-compare, \

      DISABLED_WARNINGS_solstudio := notemsource, \

  ))

  ADLC_TOOL := $(BUILD_ADLC_TARGET)

  ##############################################################################

  # Transform the ad source files into C++ source files using adlc

  # Setup flags for the adlc build tool (ADLCFLAGS).

  ADLCFLAGS += -q -T

  # ADLC flags depending on target OS

  ifeq ($(OPENJDK_TARGET_OS), linux)

    ADLCFLAGS += -DLINUX=1 -D_GNU_SOURCE=1

  else ifeq ($(OPENJDK_TARGET_OS), solaris)

    ADLCFLAGS += -DSOLARIS=1 -DSPARC_WORKS=1

  else ifeq ($(OPENJDK_TARGET_OS), aix)

    ADLCFLAGS += -DAIX=1

  else ifeq ($(OPENJDK_TARGET_OS), macosx)

    ADLCFLAGS += -D_ALLBSD_SOURCE=1 -D_GNU_SOURCE=1

  endif

  ifneq ($(OPENJDK_TARGET_OS), windows)

    # NOTE: Windows adlc flags was different in the old build. Is this really

    # correct?

    # -g makes #line directives in the generated C++ files.

    ADLCFLAGS += -g

    ADLCFLAGS += -D$(HOTSPOT_TARGET_CPU_DEFINE)=1

  endif

  # This generates checks in the generated C++ files that _LP64 is correctly

  # (un)defined when compiling them.

  ifeq ($(OPENJDK_TARGET_CPU_BITS), 64)

    ADLCFLAGS += -D_LP64=1

  else

    ADLCFLAGS += -U_LP64

  endif

  ##############################################################################

  # Concatenate all ad source files into a single file, which will be fed to

  # adlc. Also include a #line directive at the start of every included file

  # (after the initial header block), stating the original source file name.

  #

  # Normally, debugging is done directly on the ad_<arch>*.cpp files, but the

  # #line directives in those files will be pointing back to <arch>.ad.

  # AD_SRC_ROOTS might have been added to by a custom extension

  AD_SRC_ROOTS += $(HOTSPOT_TOPDIR)/src

  AD_SRC_FILES := $(call uniq, $(wildcard $(foreach d, $(AD_SRC_ROOTS), \

      $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_CPU).ad \

      $d/cpu/$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_CPU_ARCH).ad \

      $d/os_cpu/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH)/vm/$(HOTSPOT_TARGET_OS)_$(HOTSPOT_TARGET_CPU_ARCH).ad \

    )))

  SINGLE_AD_SRCFILE := $(ADLC_SUPPORT_DIR)/all-ad-src.ad

  INSERT_FILENAME_AWK_SCRIPT := \

      '{ \

         if (CUR_FN != FILENAME) { CUR_FN=FILENAME; NR_BASE=NR-1; need_lineno=1 } \

         if (need_lineno && $$0 !~ /\/\//) \

           { print "\n\n\#line " (NR-NR_BASE) " \"" FILENAME "\""; need_lineno=0 }; \

         print \

       }'

  $(SINGLE_AD_SRCFILE): $(AD_SRC_FILES)

	$(call LogInfo, Preprocessing adlc files $(^F))

	$(call MakeDir, $(@D))

	$(NAWK) $(INSERT_FILENAME_AWK_SCRIPT) $^ > $@

  ##############################################################################

  # Run the adlc tool on the single concatenated ad source file, and store the

  # output in support/adlc for further processing.

  ADLC_RUN_MARKER := $(ADLC_SUPPORT_DIR)/_adlc_run.marker

  $(ADLC_RUN_MARKER): $(BUILD_ADLC) $(SINGLE_AD_SRCFILE)

	$(call LogInfo, Generating adlc files)

	$(call MakeDir, $(@D))

	$(call ExecuteWithLog, $(ADLC_SUPPORT_DIR)/adlc_run, \

	    $(FIXPATH) $(ADLC_TOOL) $(ADLCFLAGS) $(SINGLE_AD_SRCFILE) \

	        -c$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \

	        -h$(ADLC_SUPPORT_DIR)/ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \

	        -a$(ADLC_SUPPORT_DIR)/dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \

	        -v$(ADLC_SUPPORT_DIR)/adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp)

	$(TOUCH) $@

  ##############################################################################

  # Finally copy the generated files from support/adlc into gensrc/adfiles,

  # and postprocess them by fixing dummy #line directives.

  ADLC_GENERATED_FILES := $(addprefix $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/, \

      ad_$(HOTSPOT_TARGET_CPU_ARCH).cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH).hpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_clone.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_expand.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_format.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_gen.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_misc.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_peephole.cpp \

      ad_$(HOTSPOT_TARGET_CPU_ARCH)_pipeline.cpp \

      adGlobals_$(HOTSPOT_TARGET_CPU_ARCH).hpp \

      dfa_$(HOTSPOT_TARGET_CPU_ARCH).cpp \

  )

  $(JVM_VARIANT_OUTPUTDIR)/gensrc/adfiles/%: $(ADLC_RUN_MARKER)

	$(call LogInfo, Postprocessing adlc file $*)

	$(call MakeDir, $(@D))

	$(NAWK) \

	    'BEGIN { print "#line 1 \"$*\""; } \

	     /^#line 999999$$/ {print "#line " (NR+1) " \"$*\""; next} \

	     {print}' \

	    < $(ADLC_SUPPORT_DIR)/$* > $@

  TARGETS := $(ADLC_GENERATED_FILES)

endif