#

# Copyright (c) 2011, 2015, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

# When you read this source. Remember that $(sort ...) has the side effect

# of removing duplicates. It is actually this side effect that is

# desired whenever sort is used below!

ifndef _JAVA_COMPILATION_GMK

_JAVA_COMPILATION_GMK := 1

ifeq (,$(_MAKEBASE_GMK))

  $(error You must include MakeBase.gmk prior to including JavaCompilation.gmk)

endif

# Java compilation needs SetupJarArchive and/or SetupZipArchive, if we're

# generating a jar file or a source zip.

include JarArchive.gmk

include ZipArchive.gmk

# Setup make rules for defining a Java compiler, which is needed to compile

# Java code. This rule generates no output.

#

# Parameter 1 is the name of the compiler definition. This name needs to be

# passed to SetupJavaCompilation. This name is used as variable prefix.

#

# Remaining parameters are named arguments. These include:

#   JVM:=The jvm used to run the javac/javah command

#   JAVAC:=The javac jar and bootstrap classpath changes, or just bin/javac if JVM is left out

#   FLAGS:=Flags to be supplied to javac

#   SERVER_DIR:=Use a javac server (-XDserver) and store the server related files here

#   SERVER_JVM:=Use this JVM for the server. Defaults to the JVM above.

#   DISABLE_SJAVAC:=Set to true if this setup does not support sjavac

SetupJavaCompiler = $(NamedParamsMacroTemplate)

define SetupJavaCompilerBody

  # The port file contains the tcp/ip on which the server listens

  # and the cookie necessary to talk to the server.

  $1_SJAVAC_PORTFILE:=$$($1_SERVER_DIR)/server.port

  # You can use a different JVM to run the background javac server.

  ifeq ($$($1_SERVER_JVM),)

    # It defaults to the same JVM that is used to start the javac command.

    $1_SERVER_JVM:=$$($1_JVM)

  endif

endef

define add_file_to_copy

  # param 1 = BUILD_MYPACKAGE

  # parma 2 = The source file to copy.

  $2_TARGET:=$2

  # Remove the source prefix.

  $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))

  # To allow for automatic overrides, do not create a rule for a target file that

  # already has one

  ifneq ($$($1_COPY_$$($2_TARGET)), 1)

    $1_COPY_$$($2_TARGET) := 1

    # Now we can setup the dependency that will trigger the copying.

    $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) : $2

	$(MKDIR) -p $$(@D)

	$(CP) $$< $$@

	$(CHMOD) -f ug+w $$@

    # And do not forget this target

    $1_ALL_COPY_TARGETS += $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET)

  endif

endef

# This macro is used only for properties files that are to be

# copied over to the classes directory in cleaned form:

# Previously this was inconsistently done in different repositories.

# This is the new clean standard. Though it is to be superseded by

# a standard annotation processor from with sjavac.

#

# An empty echo ensures that the input to sed always ends with a newline.

# Certain implementations (e.g. Solaris) will skip the last line without

# it.

#

# The sed expression does this:

# 1. Add a backslash before any :, = or ! that do not have a backslash already.

# 2. Apply the file unicode2x.sed which does a whole bunch of \u00XX to \xXX

#    conversions.

# 3. Delete all lines starting with #.

# 4. Delete empty lines.

# 5. Append lines ending with \ with the next line.

# 6. Remove leading and trailing white space. Note that tabs must be explicit

#    as sed on macosx does not understand '\t'.

# 7. Replace the first \= with just =.

# 8. Finally it's all sorted to create a stable output.

#

# It is assumed that = is the character used for separating names and values.

define add_file_to_clean

  # param 1 = BUILD_MYPACKAGE

  # parma 2 = The source file to copy and clean.

  $2_TARGET:=$2

  # Remove the source prefix.

  $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))

  # Now we can setup the depency that will trigger the copying.

  # To allow for automatic overrides, do not create a rule for a target file that

  # already has one

  ifneq ($$($1_CLEAN_$$($2_TARGET)), 1)

    $1_CLEAN_$$($2_TARGET) := 1

    $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET) : $2

	$(MKDIR) -p $$(@D)

	export LC_ALL=C ; ( $(CAT) $$< && $(ECHO) "" ) \

	    | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' \

	        -e 's/\([^\\]\)!/\1\\!/g' -e 's/^[ 	]*#.*/#/g' \

	    | $(SED) -f "$(SRC_ROOT)/make/common/support/unicode2x.sed" \

	    | $(SED) -e '/^#/d' -e '/^$$$$/d' \

	        -e :a -e '/\\$$$$/N; s/\\\n//; ta' \

	        -e 's/^[ 	]*//;s/[ 	]*$$$$//' \

	        -e 's/\\=/=/' \

	    | $(SORT) > $$@

	$(CHMOD) -f ug+w $$@

    # And do not forget this target

    $1_ALL_COPY_CLEAN_TARGETS += $$($1_BIN)$$($1_MODULE_SUBDIR)$$($2_TARGET)

  endif

endef

define remove_string

  $2 := $$(subst $1,,$$($2))

endef

# Setup make rules for compiling Java source code to class files and/or a

# resulting jar file.

#

# Parameter 1 is the name of the rule. This name is used as variable prefix,

# and the targets generated are listed in a variable by that name.

#

# Remaining parameters are named arguments. These include:

#   SETUP:=must point to a previously setup java compiler, for example: SETUP:=BOOTJAVAC

#   JVM:=path to ..bin/java

#   ADD_JAVAC_FLAGS:=javac flags to append to the default ones.

#   SRC:=one or more directories to search for sources. The order of the source roots

#        is significant. The first found file of a certain name has priority.

#   BIN:=store classes here

#   MODULE:=Name of module being compiled. If set, classes are put in BIN/MODULE.

#   CLASSPATH:=a list of additional entries to set as classpath to javac

#   INCLUDES:=myapp.foo means will only compile java files in myapp.foo or any of its sub-packages.

#   EXCLUDES:=myapp.foo means will do not compile java files in myapp.foo or any of its sub-packages.

#   COPY:=.prp means copy all prp files to the corresponding package in BIN.

#   COPY_FILES:=myapp/foo/setting.txt means copy this file over to the package myapp/foo

#   CLEAN:=.properties means copy and clean all properties file to the corresponding package in BIN.

#   CLEAN_FILES:=myapp/foo/setting.txt means clean this file over to the package myapp/foo

#   SRCZIP:=Create a src.zip based on the found sources and copied files.

#   INCLUDE_FILES:="com/sun/SolarisFoobar.java" means only compile this file!

#   EXCLUDE_FILES:="com/sun/SolarisFoobar.java" means do not compile this particular file!

#       "SolarisFoobar.java" means do not compile SolarisFoobar, wherever it is found.

#   HEADERS:=path to directory where all generated c-headers are written.

#   DEPENDS:=Extra dependecy

#   DISABLE_SJAVAC:=Explicitly disable the use of sjavac for this compilation unit.

#   KEEP_DUPS:=Do not remove duplicate file names from different source roots.

SetupJavaCompilation = $(NamedParamsMacroTemplate)

define SetupJavaCompilationBody

  # Verify arguments

  ifeq ($$($1_BIN),)

    $$(error Must specify BIN (in $1))

  endif

  # Extract the info from the java compiler setup.

  $1_JVM := $$($$($1_SETUP)_JVM)

  $1_JAVAC := $$($$($1_SETUP)_JAVAC)

  $1_FLAGS := $$($$($1_SETUP)_FLAGS) $$($1_ADD_JAVAC_FLAGS) $(JAVAC_FLAGS)

  ifneq ($$($1_CLASSPATH), )

    $1_FLAGS += -cp $$(call PathList, $$($1_CLASSPATH))

  endif

  ifeq ($$($1_JAVAC),)

    $$(error The Java compilation $1 refers to a non-existant java compiler setup $$($1_SETUP))

  endif

  $1_SJAVAC_PORTFILE := $$($$($1_SETUP)_SJAVAC_PORTFILE)

  $1_SERVER_JVM := $$($$($1_SETUP)_SERVER_JVM)

  $1_DISABLE_SJAVAC := $$($$($1_SETUP)_DISABLE_SJAVAC)

  ifneq ($$($1_MODULE), )

    $1_MODULE_SUBDIR := /$$($1_MODULE)

  endif

  # Make sure the dirs exist.

  $$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupJavaCompilation $1 contains missing directory >$$d<)))

  $$(call MakeDir,$$($1_BIN))

  # Add all source roots to the find cache since we are likely going to run find

  # on these more than once. The cache will only be updated if necessary.

  $$(eval $$(call FillCacheFind,$$($1_SRC)))

  # Find all files in the source trees. Preserve order of source roots so that

  # the first version in case of multiple instances of the same file is selected.

  # CacheFind does not preserve order so need to call it for each root.

  $1_ALL_SRCS += $$(foreach s, $$($1_SRC), $$(call CacheFind, $$(s)))

  # Extract the java files.

  $1_SRCS := $$(filter %.java, $$($1_ALL_SRCS))

  # Translate include/exclude into patterns

  ifneq ($$($1_EXCLUDE_FILES), )

    $1_EXCLUDE_PATTERN := $$(addprefix %, $$($1_EXCLUDE_FILES))

  endif

  ifneq ($$($1_INCLUDE_FILES), )

    $1_INCLUDE_PATTERN := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_INCLUDE_FILES)))

  endif

  ifneq ($$($1_EXCLUDES), )

    $1_EXCLUDE_PATTERN += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_EXCLUDES))))

  endif

  ifneq ($$($1_INCLUDES), )

    $1_INCLUDE_PATTERN += $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$(addsuffix /%, $$($1_INCLUDES))))

  endif

  # Apply include/exclude patterns to java sources

  ifneq ($$($1_EXCLUDE_PATTERN), )

    $1_SRCS := $$(filter-out $$($1_EXCLUDE_PATTERN), $$($1_SRCS))

  endif

  ifneq ($$($1_INCLUDE_PATTERN), )

    $1_SRCS := $$(filter $$($1_INCLUDE_PATTERN), $$($1_SRCS))

  endif

  ifneq ($$($1_KEEP_DUPS), true)

    # Remove duplicate source files by keeping the first found of each duplicate.

    # This allows for automatic overrides with custom or platform specific versions

    # source files.

    #

    # For the smart javac wrapper case, add each removed file to an extra exclude

    # file list to prevent sjavac from finding duplicate sources.

    $1_SRCS := $$(strip $$(foreach s, $$($1_SRCS), \

        $$(eval relative_src := $$(call remove-prefixes, $$($1_SRC), $$(s))) \

        $$(if $$($1_$$(relative_src)), \

          $$(eval $1_SJAVAC_EXCLUDE_FILES += $$(s)), \

          $$(eval $1_$$(relative_src) := 1) $$(s))))

  endif

  ifeq ($$(strip $$($1_SRCS)), )

    $$(error No source files found for $1)

  endif

  $1_SAFE_NAME := $$(strip $$(subst /,_, $1))

  # All files below META-INF are always copied.

  $1_ALL_COPIES := $$(filter $$(addsuffix /META-INF%,$$($1_SRC)),$$($1_ALL_SRCS))

  # Find all files to be copied from source to bin.

  ifneq (,$$($1_COPY)$$($1_COPY_FILES))

    # Search for all files to be copied.

    $1_ALL_COPIES += $$(filter $$(addprefix %,$$($1_COPY)),$$($1_ALL_SRCS))

    # Copy these explicitly

    $1_ALL_COPIES += $$($1_COPY_FILES)

  endif

  # Copy must also respect filters.

  ifneq (,$$($1_INCLUDE_PATTERN))

    $1_ALL_COPIES := $$(filter $$($1_INCLUDE_PATTERN),$$($1_ALL_COPIES))

  endif

  ifneq (,$$($1_EXCLUDE_PATTERN))

    $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_PATTERN),$$($1_ALL_COPIES))

  endif

  ifneq (,$$($1_ALL_COPIES))

    # Yep, there are files to be copied!

    $1_ALL_COPY_TARGETS:=

        $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i)))

    # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files!

  endif

  # Find all property files to be copied and cleaned from source to bin.

  ifneq (,$$($1_CLEAN)$$($1_CLEAN_FILES))

    # Search for all files to be copied.

    $1_ALL_CLEANS := $$(filter $$(addprefix %,$$($1_CLEAN)),$$($1_ALL_SRCS))

    # Clean these explicitly

    $1_ALL_CLEANS += $$($1_CLEAN_FILES)

    # Copy and clean must also respect filters.

    ifneq (,$$($1_INCLUDE_PATTERN))

      $1_ALL_CLEANS := $$(filter $$($1_INCLUDE_PATTERN),$$($1_ALL_CLEANS))

    endif

    ifneq (,$$($1_EXCLUDE_PATTERN))

      $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_PATTERN),$$($1_ALL_CLEANS))

    endif

    ifneq (,$$($1_ALL_CLEANS))

      # Yep, there are files to be copied and cleaned!

      $1_ALL_COPY_CLEAN_TARGETS:=

          $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_clean,$1,$$i)))

      # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files!

    endif

  endif

  # Create a sed expression to remove the source roots and to replace / with .

  # and remove .java at the end.

  $1_REWRITE_INTO_CLASSES:=$$(foreach i,$$($1_SRC),-e 's|$$i/||g') -e 's|/|.|g' -e 's|.java$$$$||g'

  # Create SJAVAC variable from JAVAC variable. Expects $1_JAVAC to be

  # "bootclasspathprepend -cp .../javac.jar com.sun.tools.javac.Main"

  # and javac is simply replaced with sjavac.

  $1_SJAVAC:=$$(subst com.sun.tools.javac.Main,com.sun.tools.sjavac.Main,$$($1_JAVAC))

  # Set the $1_REMOTE to spawn a background javac server.

  $1_REMOTE:=--server:portfile=$$($1_SJAVAC_PORTFILE),id=$1,sjavac=$$(subst \

      $$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_SJAVAC))))

  $1_COMPILE_TARGET := $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_batch

  ifeq ($$($1_DISABLE_SJAVAC)x$$(ENABLE_SJAVAC),xyes)

    # Using sjavac to compile.

    # Create the sjavac wrapper command line. Sjavac doesn't handle patterns that

    # match the absolute path, only the part inside each src dir. Instead -i and

    # -x flags apply only to the next -src arg on the command line.

    $1_EXCLUDE_FILES_ABS := $$(filter /%, $$($1_EXCLUDE_FILES)) $$($1_SJAVAC_EXCLUDE_FILES)

    $1_EXCLUDE_FILES_REL := $$(filter-out /%, $$($1_EXCLUDE_FILES))

    $1_SJAVAC_ARGS_STRING := $$(foreach s, $$(patsubst %/, %, $$($1_SRC)), \

        $$(addprefix -x ,$$(addsuffix /**,$$($1_EXCLUDES))) \

        $$(addprefix -i ,$$(addsuffix /**,$$($1_INCLUDES))) \

        $$(addprefix -x **,$$(strip $$($1_EXCLUDE_FILES_REL))) \

        $$(addprefix -i **,$$(strip $$($1_INCLUDE_FILES))) \

        $$(addprefix -x , $$(strip $$(patsubst $$(s)/%, %, $$(filter $$(s)/%, $$($1_EXCLUDE_FILES_ABS))))) \

        -src $$(s))

    ifneq ($$(word 20, $$($1_SJAVAC_ARGS_STRING)), )

      $1_SJAVAC_ARGS_FILE := $$($1_BIN)/_the.$1_args

      $1_SJAVAC_ARGS := @$$($1_SJAVAC_ARGS_FILE)

    else

      $1_SJAVAC_ARGS := $$($1_SJAVAC_ARGS_STRING)

    endif

    ifneq (,$$($1_HEADERS))

      $1_HEADERS_ARG := -h $$($1_HEADERS)

    endif

    $1_VARDEPS := $$($1_JVM) $$($1_SJAVAC) $$($1_SJAVAC_ARGS_STRING) $$($1_FLAGS) \

        $$($1_HEADERS_ARG) $$($1_BIN) $$($1_EXCLUDES) $$($1_INCLUDES) \

        $$($1_EXCLUDE_FILES) $$($1_INCLUDE_FILES)

    $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \

        $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1.vardeps)

    $$($1_COMPILE_TARGET): $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)

	$$(call MakeDir, $$(@D) $$(dir $$($1_SJAVAC_PORTFILE)))

	$$(eval $$(call ListPathsSafely,$1_SRCS, $$@.tmp))

        ifneq ($$($1_SJAVAC_ARGS_FILE), )

	  $$(eval $$(call ListPathsSafely,$1_SJAVAC_ARGS_STRING, $$($1_SJAVAC_ARGS_FILE)))

        endif

	$$(call LogWarn, Compiling $1)

	$$(call ExecuteWithLog, $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$$($1_SAFE_NAME)_batch, \

	    $$($1_JVM) $$($1_SJAVAC) \

	        $$($1_REMOTE) \

	        -j 1 \

	        --permit-unidentified-artifacts \

	        --permit-sources-without-package \

	        --compare-found-sources $$@.tmp \

	        --log=$(LOG_LEVEL) \

	        --state-dir=$$($1_BIN)$$($1_MODULE_SUBDIR) \

	        $$($1_SJAVAC_ARGS) \

	        $$($1_FLAGS) \

	        $$($1_HEADERS_ARG) \

	        -d $$($1_BIN)) && \

	$(MV) $$@.tmp $$@

        # Create a pubapi file that only changes when the pubapi changes. Dependent

        # compilations can use this file to only get recompiled when pubapi has changed.

        # Grep returns 1 if no matching lines are found. Do not fail for this.

	$(GREP) -e "^I" $$($1_BIN)$$($1_MODULE_SUBDIR)/javac_state > $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi.tmp \

	    || test "$$$$?" = "1"

	if [ ! -f $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi ] \

	    || [ "`$(DIFF) $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi \

	        $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi.tmp`" != "" ]; then \

	  $(MV) $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi.tmp \

	      $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1_pubapi; \

	fi

  else

    # Using plain javac to batch compile everything.

    # When building in batch, put headers in a temp dir to filter out those that actually

    # changed before copying them to the real header dir.

    ifneq (,$$($1_HEADERS))

      $1_HEADERS_ARG := -h $$($1_HEADERS).$1.tmp

      $$($1_HEADERS)/_the.$1_headers: $$($1_COMPILE_TARGET)

		$(MKDIR) -p $$(@D)

		if [ -d "$$($1_HEADERS).$1.tmp" ]; then \

		  for f in `$(CD) $$($1_HEADERS).$1.tmp && $(FIND) . -type f`; do \

		    if [ ! -f "$$($1_HEADERS)/$$$$f" ] \

		        || [ "`$(DIFF) $$($1_HEADERS)/$$$$f $$($1_HEADERS).$1.tmp/$$$$f`" != "" ]; then \

		      $(MKDIR) -p `$(DIRNAME) $$($1_HEADERS)/$$$$f`; \

		      $(CP) -f $$($1_HEADERS).$1.tmp/$$$$f $$($1_HEADERS)/$$$$f; \

		    fi; \

		  done; \

		fi

		$(RM) -r $$($1_HEADERS).$1.tmp

		$(TOUCH) $$@

      $1_HEADER_TARGETS := $$($1_HEADERS)/_the.$1_headers

    endif

    $1_VARDEPS := $$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) $$($1_BIN) \

        $$($1_HEADERS_ARG) $$($1_EXCLUDES) $$($1_INCLUDES) \

        $$($1_EXCLUDE_FILES) $$($1_INCLUDE_FILES)

    $1_VARDEPS_FILE := $$(call DependOnVariable, $1_VARDEPS, \

        $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$1.vardeps)

    ifeq ($$($1_DISABLE_SJAVAC)x$(ENABLE_JAVAC_SERVER), xyes)

      $1_JAVAC_CMD := $$($1_SJAVAC) $$($1_REMOTE)

    else

      $1_JAVAC_CMD := $$($1_JAVAC)

    endif

    # When not using sjavac, pass along all sources to javac using an @file.

    $$($1_COMPILE_TARGET): $$($1_SRCS) $$($1_DEPENDS) $$($1_VARDEPS_FILE)

	$$(call MakeDir, $$(@D))

	$$(eval $$(call ListPathsSafely,$1_SRCS, $$@.tmp))

	$$(call LogWarn, Compiling $$(words $$($1_SRCS)) files for $1)

	$$(call ExecuteWithLog, $$($1_BIN)$$($1_MODULE_SUBDIR)/_the.$$($1_SAFE_NAME)_batch, \

	    $$($1_JVM) $$($1_JAVAC_CMD) $$($1_FLAGS) \

	        -implicit:none \

		-d $$($1_BIN) $$($1_HEADERS_ARG) @$$@.tmp) && \

	$(MV) $$@.tmp $$@

  endif

  # Add all targets to main variable

  $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_COMPILE_TARGET) \

      $$($1_HEADER_TARGETS)

  # Check if a jar file was specified, then setup the rules for the jar.

  ifneq (,$$($1_JAR))

    # If no suffixes was explicitly set for this jar file.

    # Use class and the cleaned/copied properties file suffixes as the default

    # for the types of files to be put into the jar.

    ifeq (,$$($1_SUFFIXES))

      $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY)

    endif

    $$(eval $$(call SetupJarArchive, ARCHIVE_$1, \

        DEPENDENCIES:=$$($1), \

        SRCS:=$$($1_BIN)$$($1_MODULE_SUBDIR), \

        SUFFIXES:=$$($1_SUFFIXES), \

        EXCLUDE:=$$($1_EXCLUDES), \

        INCLUDES:=$$($1_INCLUDES), \

        EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS), \

        JAR:=$$($1_JAR), \

        JARMAIN:=$$($1_JARMAIN), \

        MANIFEST:=$$($1_MANIFEST), \

        EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR), \

        JARINDEX:=$$($1_JARINDEX), \

        HEADERS:=$$($1_HEADERS), \

        SETUP:=$$($1_SETUP), \

    ))

    # Add jar to target list

    $1 += $$($1_JAR)

  endif

  # Check if a srczip was specified, then setup the rules for the srczip.

  ifneq (,$$($1_SRCZIP))

    $$(eval $$(call SetupZipArchive, ZIP_ARCHIVE_$1, \

        SRC:=$$($1_SRC), \

        ZIP:=$$($1_SRCZIP), \

        INCLUDES:=$$($1_INCLUDES), \

        EXCLUDES:=$$($1_EXCLUDES), \

        EXCLUDE_FILES:=$$($1_EXCLUDE_FILES)))

    # Add zip to target list

    $1 += $$($1_SRCZIP)

  endif

endef

# Use this macro to find the correct target to depend on when the original

# SetupJavaCompilation is declared in a different makefile, to avoid having

# to declare and evaluate it again.

# param 1 is for example BUILD_MYPACKAGE

# param 2 is the output directory (BIN)

define SetupJavaCompilationCompileTarget

  $(if $(findstring yes, $(ENABLE_SJAVAC)), $(strip $2)/_the.$(strip $1)_pubapi, \

      $(strip $2)/_the.$(strip $1)_batch)

endef

endif # _JAVA_COMPILATION_GMK