#

# Copyright (c) 2005, 2008, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

#

# Shared variables for standard unix utilties on all platforms.

#

# Assumes Platform.gmk has been included before this file.

#

# These input UTILS_* variables can be defined at anytime, ideally once.

#         Unix Commands: Normally /bin/, /usr/bin/. or C:/mksnt/mksnt/

#            UTILS_COMMAND_PATH

#         /usr/bin/ 

#            UTILS_USR_BIN_PATH

#         /usr/ccs/bin/ (sccs, m4, lex, yacc, as, ar, strip, mcs)

#            UTILS_CCS_BIN_PATH

#         Dev Tools: zip, unzip, etc that we may have special versions of

#            UTILS_DEVTOOL_PATH

#

# WARNING:  This file cannot assume that any of these utilties are available

#           to be run via their variable names defined here.

#           The paths inside the UTILS_* variables may not be defined yet.

#

# Note: There is no guarantee that all these exist on all platforms.

#       Some only make sense for one platform, but are harmless.

#

ifeq ($(PLATFORM),linux)

  UTILS_COMMAND_PATH=$(UNIXCOMMAND_PATH)

  UTILS_USR_BIN_PATH=$(USRBIN_PATH)

  UTILS_CCS_BIN_PATH=$(USRBIN_PATH)

  UTILS_DEVTOOL_PATH=$(USRBIN_PATH)

endif

ifeq ($(PLATFORM),solaris)

  UTILS_COMMAND_PATH=$(UNIXCOMMAND_PATH)

  UTILS_USR_BIN_PATH=$(UNIXCOMMAND_PATH)

  UTILS_CCS_BIN_PATH=$(UNIXCCS_PATH)

  UTILS_DEVTOOL_PATH=$(DEVTOOLS_PATH)

endif

ifeq ($(PLATFORM),windows)

  UTILS_COMMAND_PATH=$(UNIXCOMMAND_PATH)

  UTILS_USR_BIN_PATH=$(UNIXCOMMAND_PATH)

  UTILS_CCS_BIN_PATH=$(UNIXCOMMAND_PATH)

  UTILS_DEVTOOL_PATH=$(DEVTOOLS_PATH)

endif

# Utilities

ADB            = $(UTILS_COMMAND_PATH)adb

AR             = $(UTILS_CCS_BIN_PATH)ar

AS             = $(UTILS_CCS_BIN_PATH)as

BASENAME       = $(UTILS_COMMAND_PATH)basename

BZIP2          = $(UTILS_COMMAND_PATH)bzip2

CAT            = $(UTILS_COMMAND_PATH)cat

CHMOD          = $(UTILS_COMMAND_PATH)chmod

CMP            = $(UTILS_USR_BIN_PATH)cmp

COMM           = $(UTILS_USR_BIN_PATH)comm

COMPRESS       = $(UTILS_USR_BIN_PATH)compress

CP             = $(UTILS_COMMAND_PATH)cp

CPIO           = $(UTILS_COMMAND_PATH)cpio

CUT            = $(UTILS_USR_BIN_PATH)cut

DATE           = $(UTILS_COMMAND_PATH)date

DF             = $(UTILS_COMMAND_PATH)df

DIFF           = $(UTILS_USR_BIN_PATH)diff

DIRNAME        = $(UTILS_USR_BIN_PATH)dirname

ECHO           = $(UTILS_COMMAND_PATH)echo

EGREP          = $(UTILS_COMMAND_PATH)egrep

EXPR           = $(UTILS_USR_BIN_PATH)expr

FILE           = $(UTILS_USR_BIN_PATH)file

FIND           = $(UTILS_USR_BIN_PATH)find

FMT            = $(UTILS_COMMAND_PATH)fmt

GDB            = $(UTILS_USR_BIN_PATH)gdb

GREP           = $(UTILS_COMMAND_PATH)grep

GUNZIP         = $(UTILS_COMMAND_PATH)gunzip

HEAD           = $(UTILS_USR_BIN_PATH)head

ID             = $(UTILS_COMMAND_PATH)id

ISAINFO        = $(UTILS_COMMAND_PATH)isainfo

KSH            = $(UTILS_COMMAND_PATH)ksh

LD             = $(UTILS_CCS_BIN_PATH)ld

LEX            = $(UTILS_CCS_BIN_PATH)lex

LN             = $(UTILS_COMMAND_PATH)ln

LS             = $(UTILS_COMMAND_PATH)ls

MCS            = $(UTILS_CCS_BIN_PATH)mcs

M4             = $(UTILS_CCS_BIN_PATH)m4

MKDIR          = $(UTILS_COMMAND_PATH)mkdir

MKSINFO        = $(UTILS_COMMAND_PATH)mksinfo

MSGFMT         = $(UTILS_USR_BIN_PATH)msgfmt

MV             = $(UTILS_COMMAND_PATH)mv

NAWK           = $(UTILS_USR_BIN_PATH)nawk

NM             = $(UTILS_CCS_BIN_PATH)nm

PKGMK          = $(UTILS_COMMAND_PATH)pkgmk

PRINTF         = $(UTILS_USR_BIN_PATH)printf

PWD            = $(UTILS_COMMAND_PATH)pwd

RC             = $(UTILS_COMMAND_PATH)rc

RMDIR          = $(UTILS_COMMAND_PATH)rmdir

RPM            = $(UTILS_COMMAND_PATH)rpm

RPMBUILD       = $(UTILS_COMMAND_PATH)rpmbuild

SCCS           = $(UTILS_CCS_BIN_PATH)sccs

SED            = $(UTILS_COMMAND_PATH)sed

SH             = $(UTILS_COMMAND_PATH)sh

SHOWREV        = $(UTILS_USR_BIN_PATH)showrev

SORT           = $(UTILS_COMMAND_PATH)sort

STRIP          = $(UTILS_CCS_BIN_PATH)strip

TAIL           = $(UTILS_USR_BIN_PATH)tail

TAR            = $(UTILS_COMMAND_PATH)tar

TEST           = $(UTILS_USR_BIN_PATH)test

TOUCH          = $(UTILS_COMMAND_PATH)touch

TR             = $(UTILS_USR_BIN_PATH)tr

TRUE           = $(UTILS_COMMAND_PATH)true

UNAME          = $(UTILS_COMMAND_PATH)uname

UNIQ           = $(UTILS_USR_BIN_PATH)uniq

UNZIP          = $(UTILS_USR_BIN_PATH)unzip

UNZIPSFX       = $(UTILS_DEVTOOL_PATH)unzipsfx

WC             = $(UTILS_USR_BIN_PATH)wc

WHICH          = $(UTILS_USR_BIN_PATH)which

YACC           = $(UTILS_CCS_BIN_PATH)yacc

ZIPEXE         = $(UTILS_DEVTOOL_PATH)zip

# Special cases

#RM   is defined by GNU Make as 'rm -f'

CD             = cd # intrinsic unix command

# Windows specific

ifeq ($(PLATFORM),windows)

  ifdef USING_CYGWIN

    # Intrinsic unix command, with backslash-escaped character interpretation

    ECHO = $(UNIXCOMMAND_PATH)echo -e

    ZIPEXE = $(UNIXCOMMAND_PATH)zip

    UNZIP  = $(UNIXCOMMAND_PATH)unzip

    # Some CYGWIN nawk versions require BINMODE=w for proper '\r' interpretation

    NAWK   = $(UNIXCOMMAND_PATH)awk -v BINMODE=w

  else

    ZIPEXE = $(UTILS_DEVTOOL_PATH)zip

    UNZIP  = $(UTILS_DEVTOOL_PATH)unzip

    NAWK   = $(UNIXCOMMAND_PATH)awk

  endif

  # Re-define some utilities

  LEX            =# override GNU Make intrinsic: no lex on windows

  SHA1SUM        = $(UNIXCOMMAND_PATH)openssl sha1

endif

# Linux specific

ifeq ($(PLATFORM),linux)

  # A few redefines

  # Allows for builds on Debian GNU Linux, basename is in a different place

  BASENAME=$(firstword $(wildcard $(UTILS_COMMAND_PATH)basename) \

                       $(wildcard $(UTILS_USR_BIN_PATH)basename))

  # RPM 4 has replaced "rpm -b" with an entirely new utility "rpmbuild".

  # Also, some distribution (Ubuntu, Debian, others?) place the rpm command

  # itself in /usr/bin rather than it's traditional home in /bin.

  RPM=$(firstword $(wildcard $(UTILS_COMMAND_PATH)rpm) \

		  $(wildcard $(UTILS_USR_BIN_PATH)rpm))

  RPMBUILD=$(firstword $(wildcard $(UTILS_COMMAND_PATH)rpmbuild) \

		       $(wildcard $(UTILS_USR_BIN_PATH)rpmbuild) \

		       $(wildcard $(UTILS_COMMAND_PATH)rpm) \

		       $(wildcard $(UTILS_USR_BIN_PATH)rpm))

  # Most Linux distros have "sort" in /bin.  Ubuntu, Debian and perhaps

  # others have it in /usr/bin.

  SORT=$(firstword $(wildcard $(UTILS_COMMAND_PATH)sort) \

		   $(wildcard $(UTILS_USR_BIN_PATH)sort))

  NAWK           = $(USRBIN_PATH)gawk

  # Intrinsic unix command, with backslash-escaped character interpretation

  ECHO           = /bin/echo -e

  # These are really in UTILS_USR_BIN_PATH on Linux (only sccs is not)

  AR             = $(UTILS_USR_BIN_PATH)ar

  AS             = $(UTILS_USR_BIN_PATH)as

  LD             = $(UTILS_USR_BIN_PATH)ld

  LEX            = $(UTILS_USR_BIN_PATH)lex

  MCS            = $(UTILS_USR_BIN_PATH)mcs

  M4             = $(UTILS_USR_BIN_PATH)m4

  NM             = $(UTILS_USR_BIN_PATH)nm

  STRIP          = $(UTILS_USR_BIN_PATH)strip

  YACC           = $(UTILS_USR_BIN_PATH)yacc

endif

# Solaris specific

ifeq ($(PLATFORM),solaris)

  # Intrinsic unix command, with backslash-escaped character interpretation

  #   (not using -e  will cause build failure when using /bin/bash)

  #   (using -e breaks something else)

  ECHO           = /usr/bin/echo

endif