#

# Copyright (c) 2011, 2018, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

# When you read this source. Remember that $(sort ...) has the side effect

# of removing duplicates. It is actually this side effect that is

# desired whenever sort is used below!

ifndef _NATIVE_COMPILATION_GMK

_NATIVE_COMPILATION_GMK := 1

ifeq ($(_MAKEBASE_GMK), )

  $(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)

endif

################################################################################

# Create exported symbols file for static libraries

################################################################################

# get the exported symbols from mapfiles and if there

# is no mapfile, get them from the archive

define GetSymbols

  $(RM) $$(@D)/$$(basename $$(@F)).symbols; \

  if [ ! -z $$($1_MAPFILE) -a -e $$($1_MAPFILE) ]; then \

    $(ECHO) "Getting symbols from mapfile $$($1_MAPFILE)"; \

    $(AWK) '/global:/','/local:/' $$($1_MAPFILE) | \

        $(SED) -e 's/#.*//;s/global://;s/local://;s/\;//;s/^[ 	]*/_/;/^_$$$$/d' | \

        $(EGREP) -v "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" > \

        $$(@D)/$$(basename $$(@F)).symbols || true; \

    $(NM) $$($1_TARGET) | $(GREP)  " T " | \

        $(EGREP) "JNI_OnLoad|JNI_OnUnload|Agent_OnLoad|Agent_OnUnload|Agent_OnAttach" | \

        $(CUT) -d ' ' -f 3 >>  $$(@D)/$$(basename $$(@F)).symbols || true;\

  else \

    $(ECHO) "Getting symbols from nm"; \

    $(NM) -m $$($1_TARGET) | $(GREP)  "__TEXT" | \

        $(EGREP) -v "non-external|private extern|__TEXT,__eh_frame" | \

        $(SED) -e  's/.* //' > $$(@D)/$$(basename $$(@F)).symbols; \

  fi

endef

################################################################################

# Define a native toolchain configuration that can be used by

# SetupNativeCompilation calls

#

# Parameter 1 is the name of the toolchain definition

#

# Remaining parameters are named arguments:

#   EXTENDS - Optional parent definition to get defaults from

#   CC - The C compiler

#   CXX - The C++ compiler

#   LD - The Linker

#   AR - Static linker

#   AS - Assembler

#   MT - Windows MT tool

#   RC - Windows RC tool

#   OBJCOPY - The objcopy tool for debug symbol handling

#   STRIP - The tool to use for stripping debug symbols

#   SYSROOT_CFLAGS - Compiler flags for using the specific sysroot

#   SYSROOT_LDFLAGS - Linker flags for using the specific sysroot

DefineNativeToolchain = $(NamedParamsMacroTemplate)

define DefineNativeToolchainBody

  # If extending another definition, get default values from that,

  # otherwise, nothing more needs to be done as variable assignments

  # already happened in NamedParamsMacroTemplate.

  ifneq ($$($1_EXTENDS), )

    $$(call SetIfEmpty, $1_CC, $$($$($1_EXTENDS)_CC))

    $$(call SetIfEmpty, $1_CXX, $$($$($1_EXTENDS)_CXX))

    $$(call SetIfEmpty, $1_LD, $$($$($1_EXTENDS)_LD))

    $$(call SetIfEmpty, $1_AR, $$($$($1_EXTENDS)_AR))

    $$(call SetIfEmpty, $1_AS, $$($$($1_EXTENDS)_AS))

    $$(call SetIfEmpty, $1_MT, $$($$($1_EXTENDS)_MT))

    $$(call SetIfEmpty, $1_RC, $$($$($1_EXTENDS)_RC))

    $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_EXTENDS)_OBJCOPY))

    $$(call SetIfEmpty, $1_STRIP, $$($$($1_EXTENDS)_STRIP))

    $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_EXTENDS)_SYSROOT_CFLAGS))

    $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_EXTENDS)_SYSROOT_LDFLAGS))

  endif

endef

# Create a default toolchain with the main compiler and linker

$(eval $(call DefineNativeToolchain, TOOLCHAIN_DEFAULT, \

    CC := $(CC), \

    CXX := $(CXX), \

    LD := $(LD), \

    AR := $(AR), \

    AS := $(AS), \

    MT := $(MT), \

    RC := $(RC), \

    OBJCOPY := $(OBJCOPY), \

    STRIP := $(STRIP), \

    SYSROOT_CFLAGS := $(SYSROOT_CFLAGS), \

    SYSROOT_LDFLAGS := $(SYSROOT_LDFLAGS), \

))

# Create a toolchain where linking is done with the C++ linker

$(eval $(call DefineNativeToolchain, TOOLCHAIN_LINK_CXX, \

    EXTENDS := TOOLCHAIN_DEFAULT, \

    LD := $(LDCXX), \

))

# Create a toolchain with the BUILD compiler, used for build tools that

# are to be run during the build.

$(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD, \

    CC := $(BUILD_CC), \

    CXX := $(BUILD_CXX), \

    LD := $(BUILD_LD), \

    AR := $(BUILD_AR), \

    AS := $(BUILD_AS), \

    OBJCOPY := $(BUILD_OBJCOPY), \

    STRIP := $(BUILD_STRIP), \

    SYSROOT_CFLAGS := $(BUILD_SYSROOT_CFLAGS), \

    SYSROOT_LDFLAGS := $(BUILD_SYSROOT_LDFLAGS), \

))

# BUILD toolchain with the C++ linker

$(eval $(call DefineNativeToolchain, TOOLCHAIN_BUILD_LINK_CXX, \

    EXTENDS := TOOLCHAIN_BUILD, \

    LD := $(BUILD_LDCXX), \

))

################################################################################

# Extensions of files handled by this macro.

NATIVE_SOURCE_EXTENSIONS := %.s %.S %.c %.cpp %.cc %.m %.mm

# Replaces native source extensions with the object file extension in a string.

# Param 1: the string containing source file names with extensions

# The surrounding strip is needed to keep additional whitespace out

define replace_with_obj_extension

$(strip \

  $(foreach extension, $(NATIVE_SOURCE_EXTENSIONS), \

      $(patsubst $(extension),%$(OBJ_SUFFIX),$(filter $(extension),$1))) \

)

endef

ifeq ($(OPENJDK_BUILD_OS_ENV), windows.cygwin)

  UNIX_PATH_PREFIX := /cygdrive

else ifeq ($(OPENJDK_BUILD_OS_ENV), windows.msys)

  UNIX_PATH_PREFIX :=

endif

# This pattern is used to transform the output of the microsoft CL compiler

# into a make syntax dependency file (.d)

WINDOWS_SHOWINCLUDE_SED_PATTERN := \

    -e '/^Note: including file:/!d' \

    -e 's|Note: including file: *||' \

    -e 's|\r||g' \

    -e 's|\\|/|g' \

    -e 's|^\([a-zA-Z]\):|$(UNIX_PATH_PREFIX)/\1|g' \

    -e '\|$(TOPDIR)|I !d' \

    -e 's|$$$$| \\|g' \

    #

# This pattern is used to transform a dependency file (.d) to a list

# of make targets for dependent files (.d.targets)

DEPENDENCY_TARGET_SED_PATTERN := \

    -e 's/\#.*//' \

    -e 's/^[^:]*: *//' \

    -e 's/ *\\$$$$//' \

    -e 's/^[	 ]*//' \

    -e '/^$$$$/ d' \

    -e 's/$$$$/ :/' \

    #

define add_native_source

  # param 1 = BUILD_MYPACKAGE

  # parma 2 = the source file name (..../alfa.c or .../beta.cpp)

  # param 3 = the bin dir that stores all .o (.obj) and .d files.

  # param 4 = the c flags to the compiler

  # param 5 = the c compiler

  # param 6 = the c++ flags to the compiler

  # param 7 = the c++ compiler

  # param 8 = the flags to the assembler

  # param 9 = set to disable THIS_FILE

  ifeq ($9, )

    $1_$2_THIS_FILE = -DTHIS_FILE='"$$(<F)"'

  endif

  ifeq ($$($1_$(notdir $2)_OPTIMIZATION), )

    $1_$(notdir $2)_OPT_CFLAGS := $$($1_OPT_CFLAGS)

    $1_$(notdir $2)_OPT_CXXFLAGS := $$($1_OPT_CXXFLAGS)

  else

    ifeq (NONE, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_NONE)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_NONE)

    else ifeq (LOW, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_NORM)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_NORM)

    else ifeq (HIGH, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_HI)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_HI)

    else ifeq (HIGHEST, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_HIGHEST)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST)

    else ifeq (HIGHEST_JVM, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_HIGHEST_JVM)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_HIGHEST_JVM)

    else ifeq (SIZE, $$($1_$(notdir $2)_OPTIMIZATION))

      $1_$(notdir $2)_OPT_CFLAGS := $(C_O_FLAG_SIZE)

      $1_$(notdir $2)_OPT_CXXFLAGS := $(CXX_O_FLAG_SIZE)

    else

      $$(error Unknown value for OPTIMIZATION: $$($1_$(notdir $2)_OPTIMIZATION))

    endif

  endif

  ifneq ($$($1_PRECOMPILED_HEADER), )

    ifeq ($$(filter $$(notdir $2), $$($1_PRECOMPILED_HEADER_EXCLUDE)), )

      $1_$2_USE_PCH_FLAGS := $$($1_USE_PCH_FLAGS)

    endif

  endif

  ifneq ($$(filter %.c, $2), )

    # Compile as a C file

    $1_$2_FLAGS := $(CFLAGS_CCACHE) $$($1_$2_USE_PCH_FLAGS) $4 \

        $$($1_$(notdir $2)_OPT_CFLAGS) \

        $$($1_$(notdir $2)_CFLAGS) $$($1_$2_THIS_FILE) -c

    $1_$2_COMP := $5

    $1_$2_DEP_FLAG := $(C_FLAG_DEPS)

  else ifneq ($$(filter %.m, $2), )

    # Compile as an Objective-C file

    $1_$2_FLAGS := -x objective-c $(CFLAGS_CCACHE) $$($1_$2_USE_PCH_FLAGS) $4 \

        $$($1_$(notdir $2)_OPT_CFLAGS) \

        $$($1_$(notdir $2)_CFLAGS) $$($1_$2_THIS_FILE) -c

    $1_$2_COMP := $5

    $1_$2_DEP_FLAG := $(C_FLAG_DEPS)

  else ifneq ($$(filter %.s %.S, $2), )

    # Compile as assembler file

    $1_$2_FLAGS := $8

    $1_$2_COMP := $(AS)

    $1_$2_DEP_FLAG :=

  else ifneq ($$(filter %.cpp, $2)$$(filter %.cc, $2)$$(filter %.mm, $2), )

    # Compile as a C++ or Objective-C++ file

    $1_$2_FLAGS := $(CFLAGS_CCACHE) $$($1_$2_USE_PCH_FLAGS) $6 \

        $$($1_$(notdir $2)_OPT_CXXFLAGS) \

        $$($1_$(notdir $2)_CXXFLAGS) $$($1_$2_THIS_FILE) -c

    $1_$2_COMP := $7

    $1_$2_DEP_FLAG := $(CXX_FLAG_DEPS)

  else

    $$(error Internal error in NativeCompilation.gmk: no compiler for file $2)

  endif

  # Generate the .o (.obj) file name and place it in the bin dir.

  $1_$2_OBJ := $3/$$(call replace_with_obj_extension, $$(notdir $2))

  # Only continue if this object file hasn't been processed already. This lets the first found

  # source file override any other with the same name.

  ifeq ($$(findstring $$($1_$2_OBJ), $$($1_OBJS_SO_FAR)), )

    $1_OBJS_SO_FAR += $$($1_$2_OBJ)

    ifeq ($$(filter %.s %.S, $2), )

      # And this is the dependency file for this obj file.

      $1_$2_DEP := $$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))

      # The dependency target file lists all dependencies as empty targets

      # to avoid make error "No rule to make target" for removed files

      $1_$2_DEP_TARGETS := $$(patsubst %$(OBJ_SUFFIX),%.d.targets,$$($1_$2_OBJ))

      # Include previously generated dependency information. (if it exists)

      -include $$($1_$2_DEP)

      -include $$($1_$2_DEP_TARGETS)

      ifeq ($(TOOLCHAIN_TYPE), microsoft)

        # To avoid name clashes between pdbs for objects and libs/execs, put

        # object pdbs in a separate subdir.

        $1_$2_DEBUG_OUT_FLAGS := -Fd$$(strip $$(patsubst $$($1_OBJECT_DIR)/%, \

            $$($1_OBJECT_DIR)/pdb/%, $$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ))))

      endif

    endif

    ifneq ($$(strip $$($1_$(notdir $2)_CFLAGS) $$($1_$(notdir $2)_CXXFLAGS) \

        $$($1_$(notdir $2)_OPTIMIZATION)), )

      $1_$2_VARDEPS := $$($1_$(notdir $2)_CFLAGS) $$($1_$(notdir $2)_CXXFLAGS) \

          $$($1_$(notdir $2)_OPT_CFLAGS) $$($1_$(notdir $2)_OPT_CXXFLAGS)

      $1_$2_VARDEPS_FILE := $$(call DependOnVariable, $1_$2_VARDEPS, $$($1_$2_OBJ).vardeps)

    endif

    $$($1_$2_OBJ) : $2 $$($1_COMPILE_VARDEPS_FILE) $$($1_$2_VARDEPS_FILE) | $$($1_BUILD_INFO)

	$$(call LogInfo, Compiling $$(notdir $2) (for $$($1_BASENAME)))

	$$(call MakeDir, $$(@D) $$(@D)/pdb)

        ifneq ($(TOOLCHAIN_TYPE), microsoft)

          ifeq ($(TOOLCHAIN_TYPE)$$(filter %.s, $2), solstudio)

            # The Solaris studio compiler doesn't output the full path to the object file in the

            # generated deps files. Fixing it with sed. If compiling assembly, don't try this.

	    $$(call ExecuteWithLog, $$@, \

	        $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP).tmp $(CC_OUT_OPTION)$$($1_$2_OBJ) $2)

	    $(SED) 's|^$$(@F):|$$@:|' $$($1_$2_DEP).tmp > $$($1_$2_DEP)

          else

	    $$(call ExecuteWithLog, $$@, \

	        $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2)

          endif

          # Create a dependency target file from the dependency file.

          # Solution suggested by http://make.mad-scientist.net/papers/advanced-auto-dependency-generation/

          ifneq ($$($1_$2_DEP), )

	    $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_$2_DEP) > $$($1_$2_DEP_TARGETS)

          endif

        else

          # The Visual Studio compiler lacks a feature for generating make dependencies, but by

          # setting -showIncludes, all included files are printed. These are filtered out and

          # parsed into make dependences.

          # Keep as much as possible on one execution line for best performance on Windows.

          # No need to save exit code from compilation since pipefail is always active on

          # Windows.

	  $$(call ExecuteWithLog, $$@, \

	      $$($1_$2_COMP) $$($1_$2_FLAGS) -showIncludes $$($1_$2_DEBUG_OUT_FLAGS) \

	          $(CC_OUT_OPTION)$$($1_$2_OBJ) $2) \

	      | $(GREP) -v -e "^Note: including file:" \

	          -e "^$(notdir $2)$$$$" || test "$$$$?" = "1" ; \

	  $(ECHO) $$@: \\ > $$($1_$2_DEP) ; \

	  $(SED) $(WINDOWS_SHOWINCLUDE_SED_PATTERN) $$($1_$2_OBJ).log \

	      | $(SORT) -u >> $$($1_$2_DEP) ; \

	  $(SED) $(DEPENDENCY_TARGET_SED_PATTERN) $$($1_$2_DEP) > $$($1_$2_DEP_TARGETS)

        endif

  endif

endef

# Setup make rules for creating a native binary (a shared library or an

# executable).

#

# Parameter 1 is the name of the rule. This name is used as variable prefix,

# and the targets generated are listed in a variable by that name.

#

# Remaining parameters are named arguments. These include:

#   NAME The base name for the resulting binary, excluding decorations (like *.exe)

#   TYPE Type of binary (EXECUTABLE, LIBRARY or STATIC_LIBRARY). Default is LIBRARY.

#   SUFFIX Override the default suffix for the output file

#   TOOLCHAIN Name of toolchain setup to use. Defaults to TOOLCHAIN_DEFAULT.

#   SRC one or more directory roots to scan for C/C++ files.

#   CFLAGS the compiler flags to be used, used both for C and C++.

#   CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.

#   LDFLAGS the linker flags to be used, used both for C and C++.

#   LIBS the libraries to link to

#   ARFLAGS the archiver flags to be used

#   OBJECT_DIR the directory where we store the object files

#   OUTPUT_DIR the directory where the resulting binary is put

#   INCLUDES only pick source from these directories

#   EXCLUDES do not pick source from these directories

#   INCLUDE_FILES only compile exactly these files!

#   EXCLUDE_FILES with these names

#   EXCLUDE_PATTERN exclude files matching any of these substrings

#   EXTRA_FILES List of extra files not in any of the SRC dirs

#   EXTRA_OBJECT_FILES List of extra object files to include when linking

#   VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run

#   RC_FLAGS flags for RC.

#   EMBED_MANIFEST if true, embed manifest on Windows.

#   MAPFILE mapfile

#   REORDER reorder file

#   USE_MAPFILE_FOR_SYMBOLS if true and this is a STATIC_BUILD, just copy the

#       mapfile for the output symbols file

#   CC the compiler to use, default is $(CC)

#   LD the linker to use, default is $(LD)

#   OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST, HIGHEST_JVM, SIZE

#   DISABLED_WARNINGS_<toolchain> Disable the given warnings for the specified toolchain

#   DISABLED_WARNINGS_C_<toolchain> Disable the given warnings for the specified toolchain

#       when compiling C code

#   DISABLED_WARNINGS_CXX_<toolchain> Disable the given warnings for the specified

#       toolchain when compiling C++ code

#   STRIP_SYMBOLS Set to false to override global strip policy and always leave

#       symbols in the binary, if the toolchain allows for it

#   DEBUG_SYMBOLS Set to false to disable generation of debug symbols

#   COPY_DEBUG_SYMBOLS Set to false to override global setting of debug symbol copying

#   ZIP_EXTERNAL_DEBUG_SYMBOLS Set to false to override global setting of debug symbol

#       zipping

#   CFLAGS_DEBUG_SYMBOLS Overrides the default cflags for enabling debug symbols

#   CXXFLAGS_DEBUG_SYMBOLS Overrides the default cxxflags for enabling debug symbols

#   STRIPFLAGS Optionally change the flags given to the strip command

#   PRECOMPILED_HEADER Header file to use as precompiled header

#   PRECOMPILED_HEADER_EXCLUDE List of source files that should not use PCH

SetupNativeCompilation = $(NamedParamsMacroTemplate)

define SetupNativeCompilationBody

  # If type is unspecified, default to LIBRARY

  ifeq ($$($1_TYPE), )

    $1_TYPE := LIBRARY

  endif

  # If we're doing a static build and producing a library

  # force it to be a static library and remove the -l libraries

  ifeq ($(STATIC_BUILD), true)

    ifeq ($$($1_TYPE), LIBRARY)

      $1_TYPE := STATIC_LIBRARY

    endif

  endif

  ifeq ($$($1_TYPE), EXECUTABLE)

    $1_PREFIX :=

    ifeq ($$($1_SUFFIX), )

      $1_SUFFIX := $(EXE_SUFFIX)

    endif

  else

    $1_PREFIX := $(LIBRARY_PREFIX)

    ifeq ($$($1_TYPE), LIBRARY)

      ifeq ($$($1_SUFFIX), )

        $1_SUFFIX := $(SHARED_LIBRARY_SUFFIX)

      endif

    else ifeq ($$($1_TYPE), STATIC_LIBRARY)

      ifeq ($$($1_SUFFIX), )

        $1_SUFFIX := $(STATIC_LIBRARY_SUFFIX)

      endif

    endif

  endif

  ifneq ($$($1_NAME), $(basename $$($1_NAME)))

    $$(error NAME must not contain any directory path in $1)

  endif

  ifneq ($(findstring $$($1_SUFFIX), $$($1_NAME)), )

    $$(error NAME should be specified without suffix: $$($1_SUFFIX) in $1)

  endif

  ifneq ($(findstring $$($1_PREFIX), $$($1_NAME)), )

    $$(error NAME should be specified without prefix: $$($1_PREFIX) in $1)

  endif

  ifeq ($$($1_OUTPUT_DIR), )

    $$(error OUTPUT_DIR is missing in $1)

  endif

  ifneq ($$($1_MANIFEST), )

    ifeq ($$($1_MANIFEST_VERSION), )

      $$(error If MANIFEST is provided, then MANIFEST_VERSION is required in $1)

    endif

  endif

  $1_BASENAME := $$($1_PREFIX)$$($1_NAME)$$($1_SUFFIX)

  $1_TARGET := $$($1_OUTPUT_DIR)/$$($1_BASENAME)

  $1_NOSUFFIX := $$($1_PREFIX)$$($1_NAME)

  $1_SAFE_NAME := $$(strip $$(subst /,_, $1))

  # Setup the toolchain to be used

  $$(call SetIfEmpty, $1_TOOLCHAIN, TOOLCHAIN_DEFAULT)

  $$(call SetIfEmpty, $1_CC, $$($$($1_TOOLCHAIN)_CC))

  $$(call SetIfEmpty, $1_CXX, $$($$($1_TOOLCHAIN)_CXX))

  $$(call SetIfEmpty, $1_LD, $$($$($1_TOOLCHAIN)_LD))

  $$(call SetIfEmpty, $1_AR, $$($$($1_TOOLCHAIN)_AR))

  $$(call SetIfEmpty, $1_AS, $$($$($1_TOOLCHAIN)_AS))

  $$(call SetIfEmpty, $1_MT, $$($$($1_TOOLCHAIN)_MT))

  $$(call SetIfEmpty, $1_RC, $$($$($1_TOOLCHAIN)_RC))

  $$(call SetIfEmpty, $1_OBJCOPY, $$($$($1_TOOLCHAIN)_OBJCOPY))

  $$(call SetIfEmpty, $1_STRIP, $$($$($1_TOOLCHAIN)_STRIP))

  $$(call SetIfEmpty, $1_SYSROOT_CFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_CFLAGS))

  $$(call SetIfEmpty, $1_SYSROOT_LDFLAGS, $$($$($1_TOOLCHAIN)_SYSROOT_LDFLAGS))

  # Make sure the dirs exist.

  $$(call MakeDir, $$($1_OBJECT_DIR) $$($1_OUTPUT_DIR))

  $$(foreach d, $$($1_SRC), $$(if $$(wildcard $$d), , \

      $$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))

  # Find all files in the source trees. Preserve order.

  $1_SRCS := $$(foreach s, $$($1_SRC), $$(call CacheFind, $$(s)))

  $1_SRCS := $$(filter $$(NATIVE_SOURCE_EXTENSIONS), $$($1_SRCS))

  # Extract the C/C++ files.

  ifneq ($$($1_EXCLUDE_PATTERNS), )

    # We must not match the exclude pattern against the src root(s).

    $1_SRCS_WITHOUT_ROOTS := $$($1_SRCS)

    $$(foreach i, $$($1_SRC), $$(eval $1_SRCS_WITHOUT_ROOTS := $$(patsubst \

        $$i/%,%, $$($1_SRCS_WITHOUT_ROOTS))))

    $1_ALL_EXCLUDE_FILES :=  $$(call containing, $$($1_EXCLUDE_PATTERNS), \

        $$($1_SRCS_WITHOUT_ROOTS))

  endif

  ifneq ($$($1_EXCLUDE_FILES), )

    $1_ALL_EXCLUDE_FILES += $$($1_EXCLUDE_FILES)

  endif

  ifneq ($$($1_ALL_EXCLUDE_FILES), )

    $1_EXCLUDE_FILES_PAT := $$($1_ALL_EXCLUDE_FILES) \

        $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_ALL_EXCLUDE_FILES)))

    $1_EXCLUDE_FILES_PAT := $$(addprefix %, $$($1_EXCLUDE_FILES_PAT))

    $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PAT), $$($1_SRCS))

  endif

  ifneq ($$($1_INCLUDE_FILES), )

    $1_INCLUDE_FILES_PAT := $$(foreach i, $$($1_SRC), $$(addprefix $$i/, $$($1_INCLUDE_FILES)))

    $1_SRCS := $$(filter $$($1_INCLUDE_FILES_PAT), $$($1_SRCS))

  endif