#

# Copyright (c) 1995, 2012, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

# If NEWBUILD is defined, use the new build-infra Makefiles and configure.

#     See NewMakefile.gmk for more information.

# If not specified, select what the default build is

ifndef NEWBUILD

  NEWBUILD=true

endif

ifeq ($(NEWBUILD),true)

  # The new top level Makefile

  include NewMakefile.gmk

else # Original Makefile logic

BUILD_PARENT_DIRECTORY=.

# Basename of any originally supplied ALT_OUTPUTDIR directory

ifndef ORIG_OUTPUTDIR_BASENAME

  ifdef ALT_OUTPUTDIR

    ORIG_OUTPUTDIR_BASENAME := $(shell basename $(ALT_OUTPUTDIR))

  else

    ORIG_OUTPUTDIR_BASENAME  = $(PLATFORM)-$(ARCH)

  endif

endif

export ORIG_OUTPUTDIR_BASENAME

# The three possible directories created for output (3 build flavors)

OUTPUTDIR_BASENAME-          = $(ORIG_OUTPUTDIR_BASENAME)

OUTPUTDIR_BASENAME-debug     = $(ORIG_OUTPUTDIR_BASENAME)-debug

OUTPUTDIR_BASENAME-fastdebug = $(ORIG_OUTPUTDIR_BASENAME)-fastdebug

# Relative path to a debug output area

REL_JDK_OUTPUTDIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))

# The created jdk image directory

JDK_IMAGE_DIRNAME = j2sdk-image

JDK_IMAGE_DIR     = $(OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)

ABS_JDK_IMAGE_DIR = $(ABS_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)

# Relative path from an output directory to the image directory

REL_JDK_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-$(DEBUG_NAME))/$(JDK_IMAGE_DIRNAME)

REL_JDK_DEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-debug)/$(JDK_IMAGE_DIRNAME)

REL_JDK_FASTDEBUG_IMAGE_DIR = ../$(OUTPUTDIR_BASENAME-fastdebug)/$(JDK_IMAGE_DIRNAME)

ifndef TOPDIR

  TOPDIR:=.

endif

ifndef JDK_TOPDIR

  JDK_TOPDIR=$(TOPDIR)/jdk

endif

ifndef JDK_MAKE_SHARED_DIR

  JDK_MAKE_SHARED_DIR=$(JDK_TOPDIR)/make/common/shared

endif

default: all

include $(JDK_MAKE_SHARED_DIR)/Defs-control.gmk

include ./make/Defs-internal.gmk

include ./make/sanity-rules.gmk

include ./make/hotspot-rules.gmk

include ./make/langtools-rules.gmk

include ./make/corba-rules.gmk

include ./make/jaxp-rules.gmk

include ./make/jaxws-rules.gmk

include ./make/jdk-rules.gmk

include ./make/install-rules.gmk

include ./make/sponsors-rules.gmk

include ./make/deploy-rules.gmk

all:: sanity

ifeq ($(SKIP_FASTDEBUG_BUILD), false)

  all:: fastdebug_build

endif

ifeq ($(SKIP_DEBUG_BUILD), false)

  all:: debug_build

endif

all:: all_product_build 

all_product_build::

# Everything for a full product build

ifeq ($(SKIP_PRODUCT_BUILD), false)

  all_product_build:: product_build

  ifeq ($(BUILD_INSTALL), true)

    all_product_build:: $(INSTALL)

    clobber:: install-clobber

  endif

  ifeq ($(BUILD_SPONSORS), true)

    all_product_build:: $(SPONSORS)

    clobber:: sponsors-clobber

  endif

  ifneq ($(SKIP_COMPARE_IMAGES), true)

    all_product_build:: compare-image

  endif

endif

define StartTimer

	$(MKDIR) -p $(BUILDTIMESDIR)

	$(RM) $(BUILDTIMESDIR)/build_time_*

	$(call RecordStartTime,TOTAL)

endef

define StopTimer

	$(if $(REPORT_BUILD_TIMES),$(call RecordEndTime,TOTAL) && $(call ReportBuildTimes,$1),)

endef

# Generic build of basic repo series

generic_build_repo_series:: $(SOURCE_TIPS)

	$(MKDIR) -p $(JDK_IMAGE_DIR)

	@$(call StartTimer)

ifeq ($(BUILD_LANGTOOLS), true)

  generic_build_repo_series:: langtools

  clobber:: langtools-clobber

endif

ifeq ($(BUILD_CORBA), true)

  generic_build_repo_series:: corba

  clobber:: corba-clobber

endif

ifeq ($(BUILD_JAXP), true)

  generic_build_repo_series:: jaxp

  clobber:: jaxp-clobber

endif

ifeq ($(BUILD_JAXWS), true)

  generic_build_repo_series:: jaxws

  clobber:: jaxws-clobber

endif

ifeq ($(BUILD_HOTSPOT), true)

  generic_build_repo_series:: $(HOTSPOT) 

  clobber:: hotspot-clobber

endif

ifeq ($(BUILD_JDK), true)

  generic_build_repo_series:: $(JDK_JAVA_EXE)

  clobber:: jdk-clobber

endif

ifeq ($(BUILD_DEPLOY), true)

  generic_build_repo_series:: $(DEPLOY)

  clobber:: deploy-clobber

endif

generic_build_repo_series::

	@$(call StopTimer,$(if $(DEBUG_NAME),$(DEBUG_NAME)_build,all_product_build))

# The debug build, fastdebug or debug. Needs special handling.

#  Note that debug builds do NOT do INSTALL steps, but must be done

#  after the product build and before the INSTALL step of the product build.

#

#   DEBUG_NAME is fastdebug or debug

#   ALT_OUTPUTDIR is changed to have -debug or -fastdebug suffix

#   The resulting image directory (j2sdk-image) is used by the install makefiles

#     to create a debug install bundle jdk-*-debug-** bundle (tar or zip) 

#     which will install in the debug or fastdebug subdirectory of the

#     normal product install area.

#     The install process needs to know what the DEBUG_NAME is, so

#     look for INSTALL_DEBUG_NAME in the install rules.

#

#   NOTE: On windows, do not use $(ABS_BOOTDIR_OUTPUTDIR)-$(DEBUG_NAME).

#         Due to the use of short paths in $(ABS_OUTPUTDIR), this may 

#         not be the same location.

#

# Location of fresh bootdir output

ABS_BOOTDIR_OUTPUTDIR=$(ABS_OUTPUTDIR)/bootjdk

FRESH_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(JDK_IMAGE_DIRNAME)

FRESH_DEBUG_BOOTDIR=$(ABS_BOOTDIR_OUTPUTDIR)/$(REL_JDK_IMAGE_DIR)

create_fresh_product_bootdir: FRC

	$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \

		GENERATE_DOCS=false \

		BOOT_CYCLE_SETTINGS= \

		build_product_image

create_fresh_debug_bootdir: FRC

	$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \

		GENERATE_DOCS=false \

		BOOT_CYCLE_DEBUG_SETTINGS= \

		build_debug_image

create_fresh_fastdebug_bootdir: FRC

	$(MAKE) ALT_OUTPUTDIR=$(ABS_BOOTDIR_OUTPUTDIR) \

		GENERATE_DOCS=false \

		BOOT_CYCLE_DEBUG_SETTINGS= \

		build_fastdebug_image

# Create boot image?

ifeq ($(SKIP_BOOT_CYCLE),false)

  ifneq ($(PLATFORM)$(ARCH_DATA_MODEL),solaris64)

    DO_BOOT_CYCLE=true

  endif

endif

ifeq ($(DO_BOOT_CYCLE),true)

  # Create the bootdir to use in the build

  product_build:: create_fresh_product_bootdir

  debug_build:: create_fresh_debug_bootdir

  fastdebug_build:: create_fresh_fastdebug_bootdir

  # Define variables to be used now for the boot jdk

  BOOT_CYCLE_SETTINGS= \

     ALT_BOOTDIR=$(FRESH_BOOTDIR) \

     ALT_JDK_IMPORT_PATH=$(FRESH_BOOTDIR)

  BOOT_CYCLE_DEBUG_SETTINGS= \

     ALT_BOOTDIR=$(FRESH_DEBUG_BOOTDIR) \

     ALT_JDK_IMPORT_PATH=$(FRESH_DEBUG_BOOTDIR)

else

  # Use the supplied ALT_BOOTDIR as the boot

  BOOT_CYCLE_SETTINGS=

  BOOT_CYCLE_DEBUG_SETTINGS=

endif

build_product_image:

	$(MAKE) \

	        SKIP_FASTDEBUG_BUILD=true \

	        SKIP_DEBUG_BUILD=true \

	        $(BOOT_CYCLE_SETTINGS) \

	        generic_build_repo_series

#   NOTE: On windows, do not use $(ABS_OUTPUTDIR)-$(DEBUG_NAME).

#         Due to the use of short paths in $(ABS_OUTPUTDIR), this may 

#         not be the same location.

generic_debug_build:

	$(MAKE) \

		ALT_OUTPUTDIR=$(ABS_OUTPUTDIR)/$(REL_JDK_OUTPUTDIR) \

	        DEBUG_NAME=$(DEBUG_NAME) \

		GENERATE_DOCS=false \

	        $(BOOT_CYCLE_DEBUG_SETTINGS) \

		generic_build_repo_series

build_debug_image:

	$(MAKE) DEBUG_NAME=debug generic_debug_build

build_fastdebug_image:

	$(MAKE) DEBUG_NAME=fastdebug generic_debug_build

# Build final image

product_build:: build_product_image

debug_build:: build_debug_image

fastdebug_build:: build_fastdebug_image

# The source tips are stored with the relative path to the repo.

#   This file will be used when constructing the jdk image.

source_tips: $(SOURCE_TIPS)

	$(CAT) $<

$(SOURCE_TIPS): FRC

	@$(prep-target)

	@$(call GetSourceTips)

clobber:: REPORT_BUILD_TIMES=

clobber:: 

	$(RM) -r $(OUTPUTDIR)/*

	-($(RMDIR) -p $(OUTPUTDIR) > $(DEV_NULL) 2>&1; $(TRUE))

clean: clobber

#

# Dev builds

#

dev : dev-build

dev-build:

	$(MAKE) DEV_ONLY=true all

dev-sanity:

	$(MAKE) DEV_ONLY=true sanity

dev-clobber:

	$(MAKE) DEV_ONLY=true clobber

#

# Quick jdk verification build

#

jdk_only:

	$(MAKE) SKIP_FASTDEBUG_BUILD=true BUILD_HOTSPOT=false all

#

# Quick jdk verification fastdebug build

#

jdk_fastdebug_only:

	$(MAKE) DEBUG_NAME=fastdebug BUILD_HOTSPOT=false BUILD_DEPLOY=false \

	    BUILD_INSTALL=false BUILD_SPONSORS=false generic_debug_build

#

# Quick deploy verification fastdebug build

#

deploy_fastdebug_only:

	$(MAKE) \

	    DEBUG_NAME=fastdebug \

	    BUILD_HOTSPOT=false \

	    BUILD_JDK=false \

	    BUILD_LANGTOOLS=false \

	    BUILD_CORBA=false \

	    BUILD_JAXP=false \

	    BUILD_JAXWS=false \

	    BUILD_INSTALL=false \

	    BUILD_SPONSORS=false \

	    generic_debug_build

#

# Product build (skip debug builds)

#

product_only:

	$(MAKE) SKIP_FASTDEBUG_BUILD=true all

#

# Check target

#

check: variable_check

#

# Help target

#

help: intro_help target_help variable_help notes_help examples_help

# Intro help message

intro_help:

	@$(ECHO) "\

Makefile for the JDK builds (all the JDK). \n\

"

# Target help

target_help:

	@$(ECHO) "\

--- Common Targets ---  \n\

all               -- build the core JDK (default target) \n\

help              -- Print out help information \n\

check             -- Check make variable values for correctness \n\

sanity            -- Perform detailed sanity checks on system and settings \n\

fastdebug_build   -- build the core JDK in 'fastdebug' mode (-g -O) \n\

debug_build       -- build the core JDK in 'debug' mode (-g) \n\

clean             -- remove all built and imported files \n\

clobber           -- same as clean \n\

"

# Variable help (only common ones used by this Makefile)

variable_help: variable_help_intro variable_list variable_help_end

variable_help_intro:

	@$(ECHO) "--- Common Variables ---"

variable_help_end:

	@$(ECHO) " "

# One line descriptions for the variables

OUTPUTDIR.desc             = Output directory

PARALLEL_COMPILE_JOBS.desc = Solaris/Linux parallel compile run count

SLASH_JAVA.desc            = Root of all build tools, e.g. /java or J:

BOOTDIR.desc               = JDK used to boot the build

JDK_IMPORT_PATH.desc       = JDK used to import components of the build

COMPILER_PATH.desc         = Compiler install directory

CACERTS_FILE.desc          = Location of certificates file

DEVTOOLS_PATH.desc         = Directory containing zip and gnumake

CUPS_HEADERS_PATH.desc     = Include directory location for CUPS header files

DXSDK_PATH.desc            = Root directory of DirectX SDK

# Make variables to print out (description and value)

VARIABLE_PRINTVAL_LIST +=       \

    OUTPUTDIR                   \

    PARALLEL_COMPILE_JOBS       \

    SLASH_JAVA                  \

    BOOTDIR                     \

    JDK_IMPORT_PATH             \

    COMPILER_PATH               \

    CACERTS_FILE                \

    DEVTOOLS_PATH

# Make variables that should refer to directories that exist

VARIABLE_CHECKDIR_LIST +=       \

    SLASH_JAVA                  \

    BOOTDIR                     \

    JDK_IMPORT_PATH             \

    COMPILER_PATH               \

    DEVTOOLS_PATH 

# Make variables that should refer to files that exist

VARIABLE_CHECKFIL_LIST +=       \

    CACERTS_FILE

# Some are windows specific

ifeq ($(PLATFORM), windows)

VARIABLE_PRINTVAL_LIST +=       \

    DXSDK_PATH

VARIABLE_CHECKDIR_LIST +=       \

    DXSDK_PATH

endif

# For pattern rules below, so all are treated the same

DO_PRINTVAL_LIST=$(VARIABLE_PRINTVAL_LIST:%=%.printval)

DO_CHECKDIR_LIST=$(VARIABLE_CHECKDIR_LIST:%=%.checkdir)

DO_CHECKFIL_LIST=$(VARIABLE_CHECKFIL_LIST:%=%.checkfil)

# Complete variable check

variable_check: $(DO_CHECKDIR_LIST) $(DO_CHECKFIL_LIST)

variable_list: $(DO_PRINTVAL_LIST) variable_check

# Pattern rule for printing out a variable

%.printval:

	@$(ECHO) "  ALT_$* - $($*.desc)"

	@$(ECHO) "  \t $*=$($*)"

# Pattern rule for checking to see if a variable with a directory exists

%.checkdir:

	@if [ ! -d $($*) ] ; then \

	    $(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \

	fi

# Pattern rule for checking to see if a variable with a file exists

%.checkfil:

	@if [ ! -f $($*) ] ; then \

	    $(ECHO) "WARNING: $* does not exist, try $(MAKE) sanity"; \

	fi

# Misc notes on help

notes_help:

	@$(ECHO) "\

--- Notes --- \n\

- All builds use same output directory unless overridden with \n\

 \t ALT_OUTPUTDIR=<dir>, changing from product to fastdebug you may want \n\

 \t to use the clean target first. \n\

- JDK_IMPORT_PATH must refer to a compatible build, not all past promoted \n\

 \t builds or previous release JDK builds will work. \n\

- The fastest builds have been when the sources and the BOOTDIR are on \n\

 \t local disk. \n\

"

examples_help:

	@$(ECHO) "\

--- Examples --- \n\

  $(MAKE) fastdebug_build \n\

  $(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\

  $(MAKE) ALT_OUTPUTDIR=/tmp/foobar fastdebug_build \n\

  $(MAKE) ALT_OUTPUTDIR=/tmp/foobar all \n\

  $(MAKE) ALT_BOOTDIR=/opt/java/jdk1.5.0 \n\

  $(MAKE) ALT_JDK_IMPORT_PATH=/opt/java/jdk1.6.0 \n\

"

################################################################

# Source bundling

################################################################

ifeq ($(BUNDLE_RULES_AVAILABLE), true)

  include $(BUNDLE_RULES)

endif

################################################################

# rule to test

################################################################

.NOTPARALLEL: test_run

test:

	$(MAKE) test_run

test_run: test_clean test_start test_summary

test_start:

	@$(ECHO) "Tests started at `$(DATE)`"