#

# Copyright (c) 2012, 2015, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

################################################################################

# This is the bootstrapping part of the build. This file is included from the

# top level Makefile, and is responsible for launching the Main.gmk file with

# the proper make and the proper make arguments.

################################################################################

# This must be the first rule

default:

.PHONY: default

# Inclusion of this pseudo-target will cause make to execute this file

# serially, regardless of -j.

.NOTPARALLEL:

# If included from the top-level Makefile then topdir is set, but not when

# recursively calling ourself with a spec.

ifeq ($(topdir),)

  topdir := $(strip $(patsubst %/make/, %, $(dir $(lastword $(MAKEFILE_LIST)))))

endif

# Our helper functions. Will include $(SPEC) if $(HAS_SPEC) is true.

include $(topdir)/make/InitSupport.gmk

# Here are "global" targets, i.e. targets that can be executed without having a configuration.

# This will define ALL_GLOBAL_TARGETS.

include $(topdir)/make/Help.gmk

# Extract main targets from Main.gmk.

ifneq ($(any_spec_file), )

  ifeq ($(wildcard $(dir $(any_spec_file))/make-support/module-deps.gmk),)

    # If make-support does not exist, we need to build the genmodules java tool first.

    $(info Creating data for first make execution in new configuration...)

    ignore_output := $(shell $(MAKE) -r -R -f $(topdir)/make/Main.gmk \

        -I $(topdir)/make/common SPEC=$(any_spec_file) NO_RECIPES=true FRC)

    $(info Done)

  endif

  ALL_MAIN_TARGETS := $(shell $(MAKE) -r -R -f $(topdir)/make/Main.gmk \

      -I $(topdir)/make/common SPEC=$(any_spec_file) NO_RECIPES=true print-targets)

else

  # Without at least a single valid configuration, we cannot extract any real

  # targets. To provide a helpful error message about the missing configuration

  # later on, accept whatever targets the user has provided for now.

  ALL_MAIN_TARGETS := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), default)

endif

# Targets provided by this file.

ALL_INIT_TARGETS := reconfigure

ALL_TARGETS := $(sort $(ALL_GLOBAL_TARGETS) $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS))

ifneq ($(findstring qp, $(MAKEFLAGS)),)

  ##############################################################################

  # When called with -qp, assume an external part (e.g. bash completion) is trying

  # to understand our targets. Just list our targets and do no more checking.

  ##############################################################################

  $(ALL_TARGETS):

  .PHONY: $(ALL_TARGETS)

else ifeq ($(HAS_SPEC),)

  ##############################################################################

  # This is the normal case, we have been called from the command line by the

  # user and we need to call ourself back with a proper SPEC.

  ##############################################################################

  $(eval $(call CheckControlVariables))

  $(eval $(call CheckDeprecatedEnvironment))

  $(eval $(call CheckInvalidMakeFlags))

  $(eval $(call ParseConfCheckOption))

  # Check that the LOG given is valid, and set LOG_LEVEL, LOG_NOFILE and MAKE_LOG_FLAGS.

  $(eval $(call ParseLogLevel))

  ifneq ($(findstring $(LOG_LEVEL),info debug trace),)

    $(info Running make as '$(strip $(MAKE) $(MFLAGS) $(COMMAND_LINE_VARIABLES) $(MAKECMDGOALS))')

  endif

  # CALLED_TARGETS is the list of targets that the user provided,

  # or "default" if unspecified.

  CALLED_TARGETS := $(if $(MAKECMDGOALS), $(MAKECMDGOALS), default)

  CALLED_SPEC_TARGETS := $(filter $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS), $(CALLED_TARGETS))

  ifneq ($(CALLED_SPEC_TARGETS),)

    # We have at least one non-global target, which need a SPEC

    $(eval $(call ParseConfAndSpec))

    # Now SPECS contain 1..N spec files (otherwise ParseConfAndSpec fails)

    INIT_TARGETS := $(filter $(ALL_INIT_TARGETS), $(CALLED_SPEC_TARGETS))

    SEQUENTIAL_TARGETS := $(filter dist-clean clean%, $(CALLED_SPEC_TARGETS))

    PARALLEL_TARGETS := $(filter-out $(INIT_TARGETS) $(SEQUENTIAL_TARGETS), $(CALLED_SPEC_TARGETS))

    # The spec files depend on the autoconf source code. This check makes sure

    # the configuration is up to date after changes to configure.

    $(SPECS): $(wildcard $(topdir)/common/autoconf/*)

        ifeq ($(CONF_CHECK), fail)

	  @echo "Error: The configuration is not up to date for '$(lastword $(subst /, , $(dir $@)))'."

	  $(call PrintConfCheckFailed)

	  @exit 2

        else ifeq ($(CONF_CHECK), auto)

	  @echo "Note: The configuration is not up to date for '$(lastword $(subst /, , $(dir $@)))'."

	  @( cd $(topdir) && \

	      $(MAKE) $(MFLAGS) $(MAKE_LOG_FLAGS) -f $(topdir)/make/Init.gmk SPEC=$@ HAS_SPEC=true \

	      reconfigure )

        else ifeq ($(CONF_CHECK), ignore)

          # Do nothing

        endif

    # Unless reconfigure is explicitely called, let all targets depend on the spec files to be up to date.

    ifeq ($(findstring reconfigure, $(CALLED_SPEC_TARGETS)), )

      $(CALLED_SPEC_TARGETS): $(SPECS)

    endif

    # The recipe will be run once for every target specified, but we only want to execute the

    # recipe a single time, hence the TARGET_DONE with a dummy command if true.

    $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS):

	@$(if $(TARGET_DONE), \

	  true \

	, \

	  $(foreach spec, $(SPECS), \

	    ( cd $(topdir) && \

	    $(MAKE) $(MFLAGS) $(MAKE_LOG_FLAGS) -j 1 -f $(topdir)/make/Init.gmk \

	        SPEC=$(spec) HAS_SPEC=true \

	        USER_MAKE_VARS="$(USER_MAKE_VARS)" MAKE_LOG_FLAGS=$(MAKE_LOG_FLAGS) \

	        LOG_LEVEL=$(LOG_LEVEL) LOG_NOFILE=$(LOG_NOFILE) \

	        INIT_TARGETS="$(INIT_TARGETS)" SEQUENTIAL_TARGETS="$(SEQUENTIAL_TARGETS)" \

	        PARALLEL_TARGETS="$(PARALLEL_TARGETS)"  \

	        main ) && \

	  ) true \

	  $(eval TARGET_DONE=true) \

	)

    .PHONY: $(ALL_MAIN_TARGETS) $(ALL_INIT_TARGETS)

  endif # has $(CALLED_SPEC_TARGETS)

else # HAS_SPEC=true

  ##############################################################################

  # Now we have a spec. This part provides the "main" target that acts as a

  # trampoline to call the Main.gmk with the value of $(MAKE) found in the spec

  # file.

  ##############################################################################

  ifeq ($(LOG_NOFILE), true)

    # Disable log wrapper if LOG=[level,]nofile was given

    override BUILD_LOG_WRAPPER :=

  endif

  ifeq ($(OUTPUT_SYNC_SUPPORTED), true)

    OUTPUT_SYNC_FLAG := -O$(OUTPUT_SYNC)

  endif

  $(eval $(call CheckSpecSanity))

  reconfigure:

        ifneq ($(CONFIGURE_COMMAND_LINE), )

	  $(ECHO) "Re-running configure using arguments '$(CONFIGURE_COMMAND_LINE)'"

        else

	  $(ECHO) "Re-running configure using default settings"

        endif

	( cd $(OUTPUT_ROOT) && PATH="$(ORIGINAL_PATH)" \

	    $(BASH) $(TOPDIR)/configure $(CONFIGURE_COMMAND_LINE) )

  main-init:

	$(call RotateLogFiles)

	$(BUILD_LOG_WRAPPER) $(PRINTF) "Building target(s) '$(strip \

	    $(INIT_TARGETS) $(SEQUENTIAL_TARGETS) $(PARALLEL_TARGETS) \

	    )' in configuration '$(CONF_NAME)'\n"

  # MAKEOVERRIDES is automatically set and propagated by Make to sub-Make calls.

  # We need to clear it of the init-specific variables. The user-specified

  # variables are explicitely propagated using $(USER_MAKE_VARS).

  main: MAKEOVERRIDES :=

  main: $(INIT_TARGETS) main-init

        ifneq ($(SEQUENTIAL_TARGETS), )

          # Don't touch build output dir since we might be cleaning. That means

	  # no log wrapper.

	  ( cd $(TOPDIR) && \

	      $(MAKE) $(MAKE_ARGS) -j 1 -f make/Main.gmk $(USER_MAKE_VARS) \

	      $(SEQUENTIAL_TARGETS) \

	  )

        endif

        ifneq ($(PARALLEL_TARGETS), )

	  $(call StartGlobalTimer)

	  $(call PrepareSmartJavac)

	  ( cd $(TOPDIR) && \

	      $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) $(OUTPUT_SYNC_FLAG) \

	      -j $(JOBS) -f make/Main.gmk $(USER_MAKE_VARS) \

	      $(PARALLEL_TARGETS) \

	  )

	  $(call CleanupSmartJavac)

	  $(call StopGlobalTimer)

	  $(call ReportBuildTimes)

        endif

	$(BUILD_LOG_WRAPPER) $(PRINTF) "Finished building target(s) '$(strip \

	    $(INIT_TARGETS) $(SEQUENTIAL_TARGETS) $(PARALLEL_TARGETS) \

	    )' in configuration '$(CONF_NAME)'\n"

  .PHONY: reconfigure main-init main

endif