/*

 * Copyright 2003-2007 Sun Microsystems, Inc.  All Rights Reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,

 * CA 95054 USA or visit www.sun.com if you need additional information or

 * have any questions.

 *

 */

#include "incls/_precompiled.incl"

#include "incls/_sharedRuntime_x86_64.cpp.incl"

DeoptimizationBlob *SharedRuntime::_deopt_blob;

#ifdef COMPILER2

UncommonTrapBlob   *SharedRuntime::_uncommon_trap_blob;

ExceptionBlob      *OptoRuntime::_exception_blob;

#endif // COMPILER2

SafepointBlob      *SharedRuntime::_polling_page_safepoint_handler_blob;

SafepointBlob      *SharedRuntime::_polling_page_return_handler_blob;

RuntimeStub*       SharedRuntime::_wrong_method_blob;

RuntimeStub*       SharedRuntime::_ic_miss_blob;

RuntimeStub*       SharedRuntime::_resolve_opt_virtual_call_blob;

RuntimeStub*       SharedRuntime::_resolve_virtual_call_blob;

RuntimeStub*       SharedRuntime::_resolve_static_call_blob;

#define __ masm->

class SimpleRuntimeFrame {

  public:

  // Most of the runtime stubs have this simple frame layout.

  // This class exists to make the layout shared in one place.

  // Offsets are for compiler stack slots, which are jints.

  enum layout {

    // The frame sender code expects that rbp will be in the "natural" place and

    // will override any oopMap setting for it. We must therefore force the layout

    // so that it agrees with the frame sender code.

    rbp_off = frame::arg_reg_save_area_bytes/BytesPerInt,

    rbp_off2,

    return_off, return_off2,

    framesize

  };

};

class RegisterSaver {

  // Capture info about frame layout.  Layout offsets are in jint

  // units because compiler frame slots are jints.

#define DEF_XMM_OFFS(regnum) xmm ## regnum ## _off = xmm_off + (regnum)*16/BytesPerInt, xmm ## regnum ## H_off

  enum layout {

    fpu_state_off = frame::arg_reg_save_area_bytes/BytesPerInt, // fxsave save area

    xmm_off       = fpu_state_off + 160/BytesPerInt,            // offset in fxsave save area

    DEF_XMM_OFFS(0),

    DEF_XMM_OFFS(1),

    DEF_XMM_OFFS(2),

    DEF_XMM_OFFS(3),

    DEF_XMM_OFFS(4),

    DEF_XMM_OFFS(5),

    DEF_XMM_OFFS(6),

    DEF_XMM_OFFS(7),

    DEF_XMM_OFFS(8),

    DEF_XMM_OFFS(9),

    DEF_XMM_OFFS(10),

    DEF_XMM_OFFS(11),

    DEF_XMM_OFFS(12),

    DEF_XMM_OFFS(13),

    DEF_XMM_OFFS(14),

    DEF_XMM_OFFS(15),

    fpu_state_end = fpu_state_off + ((FPUStateSizeInWords-1)*wordSize / BytesPerInt),

    fpu_stateH_end,

    r15_off, r15H_off,

    r14_off, r14H_off,

    r13_off, r13H_off,

    r12_off, r12H_off,

    r11_off, r11H_off,

    r10_off, r10H_off,

    r9_off,  r9H_off,

    r8_off,  r8H_off,

    rdi_off, rdiH_off,

    rsi_off, rsiH_off,

    ignore_off, ignoreH_off,  // extra copy of rbp

    rsp_off, rspH_off,

    rbx_off, rbxH_off,

    rdx_off, rdxH_off,

    rcx_off, rcxH_off,

    rax_off, raxH_off,

    // 16-byte stack alignment fill word: see MacroAssembler::push/pop_IU_state

    align_off, alignH_off,

    flags_off, flagsH_off,

    // The frame sender code expects that rbp will be in the "natural" place and

    // will override any oopMap setting for it. We must therefore force the layout

    // so that it agrees with the frame sender code.

    rbp_off, rbpH_off,        // copy of rbp we will restore

    return_off, returnH_off,  // slot for return address

    reg_save_size             // size in compiler stack slots

  };

 public:

  static OopMap* save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words);

  static void restore_live_registers(MacroAssembler* masm);

  // Offsets into the register save area

  // Used by deoptimization when it is managing result register

  // values on its own

  static int rax_offset_in_bytes(void)    { return BytesPerInt * rax_off; }

  static int rbx_offset_in_bytes(void)    { return BytesPerInt * rbx_off; }

  static int xmm0_offset_in_bytes(void)   { return BytesPerInt * xmm0_off; }

  static int return_offset_in_bytes(void) { return BytesPerInt * return_off; }

  // During deoptimization only the result registers need to be restored,

  // all the other values have already been extracted.

  static void restore_result_registers(MacroAssembler* masm);

};

OopMap* RegisterSaver::save_live_registers(MacroAssembler* masm, int additional_frame_words, int* total_frame_words) {

  // Always make the frame size 16-byte aligned

  int frame_size_in_bytes = round_to(additional_frame_words*wordSize +

                                     reg_save_size*BytesPerInt, 16);

  // OopMap frame size is in compiler stack slots (jint's) not bytes or words

  int frame_size_in_slots = frame_size_in_bytes / BytesPerInt;

  // The caller will allocate additional_frame_words

  int additional_frame_slots = additional_frame_words*wordSize / BytesPerInt;

  // CodeBlob frame size is in words.

  int frame_size_in_words = frame_size_in_bytes / wordSize;

  *total_frame_words = frame_size_in_words;

  // Save registers, fpu state, and flags.

  // We assume caller has already pushed the return address onto the

  // stack, so rsp is 8-byte aligned here.

  // We push rpb twice in this sequence because we want the real rbp

  // to be under the return like a normal enter.

  __ enter();          // rsp becomes 16-byte aligned here

  __ push_CPU_state(); // Push a multiple of 16 bytes

  if (frame::arg_reg_save_area_bytes != 0) {

    // Allocate argument register save area

    __ subq(rsp, frame::arg_reg_save_area_bytes);

  }

  // Set an oopmap for the call site.  This oopmap will map all

  // oop-registers and debug-info registers as callee-saved.  This

  // will allow deoptimization at this safepoint to find all possible

  // debug-info recordings, as well as let GC find all oops.

  OopMapSet *oop_maps = new OopMapSet();

  OopMap* map = new OopMap(frame_size_in_slots, 0);

  map->set_callee_saved(VMRegImpl::stack2reg( rax_off  + additional_frame_slots), rax->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( rcx_off  + additional_frame_slots), rcx->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( rdx_off  + additional_frame_slots), rdx->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( rbx_off  + additional_frame_slots), rbx->as_VMReg());

  // rbp location is known implicitly by the frame sender code, needs no oopmap

  // and the location where rbp was saved by is ignored

  map->set_callee_saved(VMRegImpl::stack2reg( rsi_off  + additional_frame_slots), rsi->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( rdi_off  + additional_frame_slots), rdi->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r8_off   + additional_frame_slots), r8->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r9_off   + additional_frame_slots), r9->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r10_off  + additional_frame_slots), r10->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r11_off  + additional_frame_slots), r11->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r12_off  + additional_frame_slots), r12->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r13_off  + additional_frame_slots), r13->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r14_off  + additional_frame_slots), r14->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg( r15_off  + additional_frame_slots), r15->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm0_off  + additional_frame_slots), xmm0->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm1_off  + additional_frame_slots), xmm1->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm2_off  + additional_frame_slots), xmm2->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm3_off  + additional_frame_slots), xmm3->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm4_off  + additional_frame_slots), xmm4->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm5_off  + additional_frame_slots), xmm5->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm6_off  + additional_frame_slots), xmm6->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm7_off  + additional_frame_slots), xmm7->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm8_off  + additional_frame_slots), xmm8->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm9_off  + additional_frame_slots), xmm9->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm10_off + additional_frame_slots), xmm10->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm11_off + additional_frame_slots), xmm11->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm12_off + additional_frame_slots), xmm12->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm13_off + additional_frame_slots), xmm13->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm14_off + additional_frame_slots), xmm14->as_VMReg());

  map->set_callee_saved(VMRegImpl::stack2reg(xmm15_off + additional_frame_slots), xmm15->as_VMReg());

  // %%% These should all be a waste but we'll keep things as they were for now

  if (true) {

    map->set_callee_saved(VMRegImpl::stack2reg( raxH_off  + additional_frame_slots),

                          rax->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( rcxH_off  + additional_frame_slots),

                          rcx->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( rdxH_off  + additional_frame_slots),

                          rdx->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( rbxH_off  + additional_frame_slots),

                          rbx->as_VMReg()->next());

    // rbp location is known implicitly by the frame sender code, needs no oopmap

    map->set_callee_saved(VMRegImpl::stack2reg( rsiH_off  + additional_frame_slots),

                          rsi->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( rdiH_off  + additional_frame_slots),

                          rdi->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r8H_off   + additional_frame_slots),

                          r8->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r9H_off   + additional_frame_slots),

                          r9->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r10H_off  + additional_frame_slots),

                          r10->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r11H_off  + additional_frame_slots),

                          r11->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r12H_off  + additional_frame_slots),

                          r12->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r13H_off  + additional_frame_slots),

                          r13->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r14H_off  + additional_frame_slots),

                          r14->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg( r15H_off  + additional_frame_slots),

                          r15->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm0H_off  + additional_frame_slots),

                          xmm0->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm1H_off  + additional_frame_slots),

                          xmm1->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm2H_off  + additional_frame_slots),

                          xmm2->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm3H_off  + additional_frame_slots),

                          xmm3->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm4H_off  + additional_frame_slots),

                          xmm4->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm5H_off  + additional_frame_slots),

                          xmm5->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm6H_off  + additional_frame_slots),

                          xmm6->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm7H_off  + additional_frame_slots),

                          xmm7->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm8H_off  + additional_frame_slots),

                          xmm8->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm9H_off  + additional_frame_slots),

                          xmm9->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm10H_off + additional_frame_slots),

                          xmm10->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm11H_off + additional_frame_slots),

                          xmm11->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm12H_off + additional_frame_slots),

                          xmm12->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm13H_off + additional_frame_slots),

                          xmm13->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm14H_off + additional_frame_slots),

                          xmm14->as_VMReg()->next());

    map->set_callee_saved(VMRegImpl::stack2reg(xmm15H_off + additional_frame_slots),

                          xmm15->as_VMReg()->next());

  }

  return map;

}

void RegisterSaver::restore_live_registers(MacroAssembler* masm) {

  if (frame::arg_reg_save_area_bytes != 0) {

    // Pop arg register save area

    __ addq(rsp, frame::arg_reg_save_area_bytes);

  }

  // Recover CPU state

  __ pop_CPU_state();

  // Get the rbp described implicitly by the calling convention (no oopMap)

  __ popq(rbp);

}

void RegisterSaver::restore_result_registers(MacroAssembler* masm) {

  // Just restore result register. Only used by deoptimization. By

  // now any callee save register that needs to be restored to a c2

  // caller of the deoptee has been extracted into the vframeArray

  // and will be stuffed into the c2i adapter we create for later

  // restoration so only result registers need to be restored here.

  // Restore fp result register

  __ movdbl(xmm0, Address(rsp, xmm0_offset_in_bytes()));

  // Restore integer result register

  __ movq(rax, Address(rsp, rax_offset_in_bytes()));

  // Pop all of the register save are off the stack except the return address

  __ addq(rsp, return_offset_in_bytes());

}

// The java_calling_convention describes stack locations as ideal slots on

// a frame with no abi restrictions. Since we must observe abi restrictions

// (like the placement of the register window) the slots must be biased by

// the following value.

static int reg2offset_in(VMReg r) {

  // Account for saved rbp and return address

  // This should really be in_preserve_stack_slots

  return (r->reg2stack() + 4) * VMRegImpl::stack_slot_size;

}

static int reg2offset_out(VMReg r) {

  return (r->reg2stack() + SharedRuntime::out_preserve_stack_slots()) * VMRegImpl::stack_slot_size;

}

// ---------------------------------------------------------------------------

// Read the array of BasicTypes from a signature, and compute where the

// arguments should go.  Values in the VMRegPair regs array refer to 4-byte

// quantities.  Values less than VMRegImpl::stack0 are registers, those above

// refer to 4-byte stack slots.  All stack slots are based off of the stack pointer

// as framesizes are fixed.

// VMRegImpl::stack0 refers to the first slot 0(sp).

// and VMRegImpl::stack0+1 refers to the memory word 4-byes higher.  Register

// up to RegisterImpl::number_of_registers) are the 64-bit

// integer registers.

// Note: the INPUTS in sig_bt are in units of Java argument words, which are

// either 32-bit or 64-bit depending on the build.  The OUTPUTS are in 32-bit

// units regardless of build. Of course for i486 there is no 64 bit build

// The Java calling convention is a "shifted" version of the C ABI.

// By skipping the first C ABI register we can call non-static jni methods

// with small numbers of arguments without having to shuffle the arguments

// at all. Since we control the java ABI we ought to at least get some

// advantage out of it.

int SharedRuntime::java_calling_convention(const BasicType *sig_bt,

                                           VMRegPair *regs,

                                           int total_args_passed,

                                           int is_outgoing) {

  // Create the mapping between argument positions and

  // registers.

  static const Register INT_ArgReg[Argument::n_int_register_parameters_j] = {

    j_rarg0, j_rarg1, j_rarg2, j_rarg3, j_rarg4, j_rarg5

  };

  static const XMMRegister FP_ArgReg[Argument::n_float_register_parameters_j] = {

    j_farg0, j_farg1, j_farg2, j_farg3,

    j_farg4, j_farg5, j_farg6, j_farg7

  };

  uint int_args = 0;

  uint fp_args = 0;

  uint stk_args = 0; // inc by 2 each time

  for (int i = 0; i < total_args_passed; i++) {

    switch (sig_bt[i]) {

    case T_BOOLEAN:

    case T_CHAR:

    case T_BYTE:

    case T_SHORT:

    case T_INT:

      if (int_args < Argument::n_int_register_parameters_j) {

        regs[i].set1(INT_ArgReg[int_args++]->as_VMReg());

      } else {

        regs[i].set1(VMRegImpl::stack2reg(stk_args));

        stk_args += 2;

      }

      break;

    case T_VOID:

      // halves of T_LONG or T_DOUBLE

      assert(i != 0 && (sig_bt[i - 1] == T_LONG || sig_bt[i - 1] == T_DOUBLE), "expecting half");

      regs[i].set_bad();

      break;

    case T_LONG:

      assert(sig_bt[i + 1] == T_VOID, "expecting half");

      // fall through

    case T_OBJECT:

    case T_ARRAY:

    case T_ADDRESS:

      if (int_args < Argument::n_int_register_parameters_j) {

        regs[i].set2(INT_ArgReg[int_args++]->as_VMReg());

      } else {

        regs[i].set2(VMRegImpl::stack2reg(stk_args));

        stk_args += 2;

      }

      break;

    case T_FLOAT:

      if (fp_args < Argument::n_float_register_parameters_j) {

        regs[i].set1(FP_ArgReg[fp_args++]->as_VMReg());

      } else {

        regs[i].set1(VMRegImpl::stack2reg(stk_args));

        stk_args += 2;

      }

      break;

    case T_DOUBLE:

      assert(sig_bt[i + 1] == T_VOID, "expecting half");

      if (fp_args < Argument::n_float_register_parameters_j) {

        regs[i].set2(FP_ArgReg[fp_args++]->as_VMReg());

      } else {

        regs[i].set2(VMRegImpl::stack2reg(stk_args));

        stk_args += 2;

      }

      break;

    default:

      ShouldNotReachHere();

      break;

    }

  }

  return round_to(stk_args, 2);

}

// Patch the callers callsite with entry to compiled code if it exists.

static void patch_callers_callsite(MacroAssembler *masm) {

  Label L;

  __ verify_oop(rbx);

  __ cmpq(Address(rbx, in_bytes(methodOopDesc::code_offset())), (int)NULL_WORD);

  __ jcc(Assembler::equal, L);

  // Save the current stack pointer

  __ movq(r13, rsp);

  // Schedule the branch target address early.

  // Call into the VM to patch the caller, then jump to compiled callee

  // rax isn't live so capture return address while we easily can

  __ movq(rax, Address(rsp, 0));

  // align stack so push_CPU_state doesn't fault

  __ andq(rsp, -(StackAlignmentInBytes));

  __ push_CPU_state();

  __ verify_oop(rbx);

  // VM needs caller's callsite

  // VM needs target method

  // This needs to be a long call since we will relocate this adapter to

  // the codeBuffer and it may not reach

  // Allocate argument register save area

  if (frame::arg_reg_save_area_bytes != 0) {

    __ subq(rsp, frame::arg_reg_save_area_bytes);

  }

  __ movq(c_rarg0, rbx);

  __ movq(c_rarg1, rax);

  __ call(RuntimeAddress(CAST_FROM_FN_PTR(address, SharedRuntime::fixup_callers_callsite)));

  // De-allocate argument register save area

  if (frame::arg_reg_save_area_bytes != 0) {

    __ addq(rsp, frame::arg_reg_save_area_bytes);

  }

  __ pop_CPU_state();

  // restore sp

  __ movq(rsp, r13);

  __ bind(L);

}

// Helper function to put tags in interpreter stack.

static void  tag_stack(MacroAssembler *masm, const BasicType sig, int st_off) {

  if (TaggedStackInterpreter) {

    int tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(0);

    if (sig == T_OBJECT || sig == T_ARRAY) {

      __ mov64(Address(rsp, tag_offset), frame::TagReference);

    } else if (sig == T_LONG || sig == T_DOUBLE) {

      int next_tag_offset = st_off + Interpreter::expr_tag_offset_in_bytes(1);

      __ mov64(Address(rsp, next_tag_offset), frame::TagValue);

      __ mov64(Address(rsp, tag_offset), frame::TagValue);

    } else {

      __ mov64(Address(rsp, tag_offset), frame::TagValue);

    }

  }

}

static void gen_c2i_adapter(MacroAssembler *masm,

                            int total_args_passed,

                            int comp_args_on_stack,

                            const BasicType *sig_bt,

                            const VMRegPair *regs,

                            Label& skip_fixup) {

  // Before we get into the guts of the C2I adapter, see if we should be here

  // at all.  We've come from compiled code and are attempting to jump to the

  // interpreter, which means the caller made a static call to get here

  // (vcalls always get a compiled target if there is one).  Check for a

  // compiled target.  If there is one, we need to patch the caller's call.

  patch_callers_callsite(masm);

  __ bind(skip_fixup);

  // Since all args are passed on the stack, total_args_passed *

  // Interpreter::stackElementSize is the space we need. Plus 1 because

  // we also account for the return address location since

  // we store it first rather than hold it in rax across all the shuffling

  int extraspace = (total_args_passed * Interpreter::stackElementSize()) + wordSize;

  // stack is aligned, keep it that way

  extraspace = round_to(extraspace, 2*wordSize);

  // Get return address

  __ popq(rax);

  // set senderSP value

  __ movq(r13, rsp);

  __ subq(rsp, extraspace);

  // Store the return address in the expected location

  __ movq(Address(rsp, 0), rax);

  // Now write the args into the outgoing interpreter space

  for (int i = 0; i < total_args_passed; i++) {

    if (sig_bt[i] == T_VOID) {

      assert(i > 0 && (sig_bt[i-1] == T_LONG || sig_bt[i-1] == T_DOUBLE), "missing half");

      continue;

    }

    // offset to start parameters

    int st_off   = (total_args_passed - i) * Interpreter::stackElementSize() +

                   Interpreter::value_offset_in_bytes();

    int next_off = st_off - Interpreter::stackElementSize();

    // Say 4 args:

    // i   st_off

    // 0   32 T_LONG

    // 1   24 T_VOID

    // 2   16 T_OBJECT

    // 3    8 T_BOOL

    // -    0 return address

    //

    // However to make thing extra confusing. Because we can fit a long/double in

    // a single slot on a 64 bt vm and it would be silly to break them up, the interpreter

    // leaves one slot empty and only stores to a single slot. In this case the

    // slot that is occupied is the T_VOID slot. See I said it was confusing.

    VMReg r_1 = regs[i].first();