#!/bin/sh

#

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

# This file should be used to set the Visual Studio environment

#   variables normally set by the vcvars32.bat or vcvars64.bat file or

#   SetEnv.cmd for older SDKs.

########################################################################

# Error functions

msg() # message

{

  echo "$1" 1>&2

}

error() # message

{

  msg "ERROR: $1"

  exit 1

}

warning() # message

{

  msg "WARNING: $1"

}

envpath() # path

{

  else

    echo "$1"

  fi

}

########################################################################

# Defaults settings

debug="false"

verbose="false"

set -e

# Check environment first

if [ "${PROGRAMFILES}" != "" ] ; then

  progfiles=`envpath "${PROGRAMFILES}"`

elif [ "${ProgramFiles}" != "" ] ; then

  progfiles=`envpath "${ProgramFiles}"`

elif [ "${SYSTEMDRIVE}" != "" ] ; then

  progfiles=`envpath "${SYSTEMDRIVE}/Program Files"`

elif [ "${SystemDrive}" != "" ] ; then

  progfiles=`envpath "${SystemDrive}/Program Files"`

else

  error "No PROGRAMFILES or SYSTEMDRIVE defined in environment"

fi

# Arch data model

if [ "${PROCESSOR_IDENTIFIER}" != "" ] ; then

  arch=`echo "${PROCESSOR_IDENTIFIER}" | cut -d' ' -f1`

  else

  fi

fi

if [ "${arch}" = "X86" -o \

     "${arch}" = "386" -o "${arch}" = "i386" -o \

     "${arch}" = "486" -o "${arch}" = "i486" -o \

     "${arch}" = "586" -o "${arch}" = "i586" -o \

     "${arch}" = "686" -o "${arch}" = "i686" -o \

     "${arch}" = "86" ] ; then

  arch="x86"

fi

if [ "${arch}" = "X64"     -o \

     "${arch}" = "8664"    -o "${arch}" = "i8664"   -o \

     "${arch}" = "amd64"   -o "${arch}" = "AMD64"   -o \

     "${arch}" = "EM64T"   -o "${arch}" = "emt64t"  -o \

     "${arch}" = "intel64" -o "${arch}" = "Intel64" -o \

     "${arch}" = "64" ] ; then

  arch="x64"

fi

if [ "${arch}" = "IA64" ] ; then

  arch="ia64"

fi

if [ "${arch}" != "x86" -a "${arch}" != "x64" -a "${arch}" != "ia64" ] ; then

 error "No PROCESSOR_IDENTIFIER or MACHTYPE environment variables and uname -m is not helping"

fi

if [ "${arch}" = "x86" ] ; then

  arch_data_model=32

  progfiles32="${progfiles}"

  progfiles64="${progfiles}"

else

  arch_data_model=64

  progfiles32="${progfiles}"

  if [ "${PROGRAMW6432}" != "" ] ; then

    progfiles64=`envpath "${PROGRAMW6432}"`

  else

    progfiles64=`envpath "C:/Program Files"`

  fi

fi

# VS2010 (VC10)

if [ "${VS100COMNTOOLS}" = "" ] ; then

  VS100COMNTOOLS="${progfiles32}/Microsoft Visual Studio 10.0/Common7/Tools/"

  export VS100COMNTOOLS

fi

vc10Bin32Dir=`envpath "${VS100COMNTOOLS}"`/../../VC/Bin

vc10Bin64Dir="${vc10Bin32Dir}${binarch64}"

vc10vars32Bat="vcvars32.bat"

vc10vars64Bat="vcvars64.bat"

# VS2008 (VC9)

if [ "${VS90COMNTOOLS}" = "" ] ; then

  VS90COMNTOOLS="${progfiles32}/Microsoft Visual Studio 9.0/Common7/Tools/"

  export VS90COMNTOOLS

fi

vc9Bin32Dir=`envpath "${VS90COMNTOOLS}"`/../../VC/Bin

vc9Bin64Dir="${vc9Bin32Dir}"

vc9vars32Bat="vcvars32.bat"

vc9vars64Bat="vcvars64.bat"

# VS2005 (VC8)

if [ "${VS80COMNTOOLS}" = "" ] ; then

  VS80COMNTOOLS="${progfiles32}/Microsoft Visual Studio 8.0/Common7/Tools/"

  export VS80COMNTOOLS

fi

vc8Bin32Dir=`envpath "${VS80COMNTOOLS}"`/../../VC/Bin

vc8Bin64Dir="${progfiles64}/Microsoft Platform SDK"

vc8vars32Bat="vcvars32.bat"

vc8vars64Bat="SetEnv.cmd /X64"

# VS2003 (VC7)

if [ "${VS71COMNTOOLS}" = "" ] ; then

  VS71COMNTOOLS="${progfiles32}/Microsoft Visual Studio .NET 2003/Common7/Tools/"

  export VS71COMNTOOLS

fi

vc7Bin32Dir=`envpath "${VS71COMNTOOLS}"`/../../VC7/Bin

vc7Bin64Dir="${progfiles64}/Microsoft Platform SDK"

vc7vars32Bat="vcvars32.bat"

vc7vars64Bat="SetEnv.cmd /X64"

# Force user to select

vcSelection=""

# Parse options

usage="Usage: $0 [-help] [-debug] [-v] [-c] [-s] [-p] [-v10] [-v9] [-v8] [-v7] [-32] [-64]"

while [ $# -gt 0 ] ; do

  if [ "$1" = "-help" ] ; then

    msg "${usage}"

    msg "  -help    Print out this help message"

    msg "  -debug   Print out extra env variables to help debug this script"

    msg "  -v       Verbose output warns about missing directories"

    msg "  -c       Print out csh style output"

    msg "  -s       Print out sh style output"

    msg "  -p       Print out properties style output"

    msg "  -v10     Use Visual Studio 10 VS2010"

    msg "  -v9      Use Visual Studio 9 VS2008"

    msg "  -v8      Use Visual Studio 8 VS2005"

    msg "  -v7      Use Visual Studio 7 VS2003"

    msg "  -32      Force 32bit"

    msg "  -64      Force 64bit"

    exit 0

  elif [ "$1" = "-debug" ] ; then

    debug="true"

    shift

  elif [ "$1" = "-v" ] ; then

    verbose="true"

    shift

  elif [ "$1" = "-c" ] ; then

    shellStyle="csh"

    shift

  elif [ "$1" = "-s" ] ; then

    shellStyle="sh"

    shift

  elif [ "$1" = "-p" ] ; then

    shellStyle="props"

    shift

  elif [ "$1" = "-v10" ] ; then

    vcBin32Dir="${vc10Bin32Dir}"

    vcBin64Dir="${vc10Bin64Dir}"

    vcvars32Bat="${vc10vars32Bat}"

    vcvars64Bat="${vc10vars64Bat}"

    vcSelection="10"

    shift

  elif [ "$1" = "-v9" ] ; then

    vcBin32Dir="${vc9Bin32Dir}"

    vcBin64Dir="${vc9Bin64Dir}"

    vcvars32Bat="${vc9vars32Bat}"

    vcvars64Bat="${vc9vars64Bat}"

    vcSelection="9"

    shift

  elif [ "$1" = "-v8" ] ; then

    vcBin32Dir="${vc8Bin32Dir}"

    vcBin64Dir="${vc8Bin64Dir}"

    vcvars32Bat="${vc8vars32Bat}"

    vcvars64Bat="${vc8vars64Bat}"

    vcSelection="8"

    shift

  elif [ "$1" = "-v7" ] ; then

    vcBin32Dir="${vc7Bin32Dir}"

    vcBin64Dir="${vc7Bin64Dir}"

    vcvars32Bat="${vc7vars32Bat}"

    vcvars64Bat="${vc7vars64Bat}"

    vcSelection="7"

    shift

  elif [ "$1" = "-32" ] ; then

    arch_data_model=32

    shift

  elif [ "$1" = "-64" ] ; then

    arch_data_model=64

    shift

  else

    msg "${usage}"

    error "Unknown option: $1"

  fi

done

# Need to pick

if [ "${vcSelection}" = "" ] ; then

  msg "${usage}"

  error "You must pick the version"

fi

# Which vcvars bat file to run

if [ "${arch_data_model}" = "32" ] ; then

  vcBinDir="${vcBin32Dir}"

  vcvarsBat="${vcvars32Bat}"

fi

if [ "${arch_data_model}" = "64" ] ; then

  vcBinDir="${vcBin64Dir}"

  vcvarsBat="${vcvars64Bat}"

fi

# Do not allow any error returns

set -e

# Different systems have different awk's

if [ -f /usr/bin/nawk ] ; then

  awk="nawk"

elif [ -f /usr/bin/gawk ] ; then

  awk="gawk"

else

  awk="awk"

fi

if [ "${verbose}" = "true" ] ; then

  echo "# Welcome to verbose mode"

  set -x

fi

if [ "${debug}" = "true" ] ; then

  echo "# Welcome to debug mode"

  set -x

fi

# Temp file area

tmp="/tmp/vsvars.$$"

rm -f -r ${tmp}

mkdir -p ${tmp}

# Check paths

checkPaths() # var path sep

{

  set -e

  sep="$3"

  checklist="${tmp}/checklist"

  printf "%s\n" "$2" | \

    sed -e 's@\\@/@g' | \

    sed -e 's@//@/@g' | \

    ${awk} -F"${sep}" '{for(i=1;i<=NF;i++){printf "%s\n",$i;}}'  \

      > ${checklist}

  cat ${checklist} | while read orig; do

    if [ "${orig}" != "" ] ; then

      if [ ! -d "${orig}" ] ; then

        warning "Directory in $1 does not exist: ${orig}"

      fi

    fi

  done

}

# Remove all duplicate entries

{

  set -e

  pathlist="${tmp}/pathlist"

  printf "%s\n" "$1" | \

    sed -e 's@\\@/@g' | \

    sed -e 's@//@/@g' | \

      > ${pathlist}

  upaths="${tmp}/upaths"

  cat ${pathlist} | while read orig; do

    p="${orig}"

      if [ "${p}" != "" ] ; then

        if [ -d "${p}" ] ; then

          if [ "${short}" != "" -a -d "${short}" ] ; then

          fi

          echo "${p}" >> ${upaths}

        fi

      fi

    fi

  done

  newpaths=""

  for i in  `cat ${upaths}` ; do

    # For some reason, \r characters can get into this

    i=`echo "${i}" | tr -d '\r' | sed -e 's@/$@@'`

    if [ "${newpaths}" = "" ] ; then

      newpaths="${i}"

    else

    fi

  done

  printf "%s\n" "${newpaths}" | \

       '{a[$1];printf "%s",$1;for(i=2;i<=NF;i++){if(!($i in a)){a[$i];printf "%s%s",FS,$i;}};printf "\n";}'

}

# Create bat file to process Visual Studio vcvars*.bat files

createBat() # batfile bindir command

{

  bat="$1"

  bindir="$2"

  command="$3"

  stdout="${bat}.stdout"

  rm -f ${bat} ${stdout}

  echo "Output from: ${command}" > ${stdout}

  bdir=`envpath "${bindir}"`

  cat > ${bat} << EOF  

REM Pick the right vcvars bat file

REM Empty these out so we only get the additions we want

set INCLUDE=

set LIB=

set LIBPATH=

set MSVCDIR=

set MSSdk=

set Mstools=

set DevEnvDir=

set VCINSTALLDIR=

set VSINSTALLDIR=

set WindowsSdkDir=

REM Run the vcvars bat file, send all output to stderr

REM Echo out env var settings

echo VS_VS71COMNTOOLS="%VS71COMNTOOLS%"

echo export VS_VS71COMNTOOLS

echo VS_VS80COMNTOOLS="%VS80COMNTOOLS%"

echo export VS_VS80COMNTOOLS

echo VS_VS90COMNTOOLS="%VS90COMNTOOLS%"

echo export VS_VS90COMNTOOLS

echo VS_VS100COMNTOOLS="%VS100COMNTOOLS%"

echo export VS_VS100COMNTOOLS

echo VS_VCINSTALLDIR="%VCINSTALLDIR%"

echo export VS_VCINSTALLDIR

echo VS_VSINSTALLDIR="%VSINSTALLDIR%"

echo export VS_VSINSTALLDIR

echo VS_DEVENVDIR="%DevEnvDir%"

echo export VS_DEVENVDIR

echo VS_MSVCDIR="%MSVCDIR%"

echo export VS_MSVCDIR

echo VS_MSSDK="%MSSdk%"

echo export VS_MSSDK

echo VS_MSTOOLS="%Mstools%"

echo export VS_MSTOOLS

echo VS_WINDOWSSDKDIR="%WindowsSdkDir%"

echo export VS_WINDOWSSDKDIR

echo VS_INCLUDE="%INCLUDE%"

echo export VS_INCLUDE

echo VS_LIB="%LIB%"

echo export VS_LIB

echo VS_LIBPATH="%LIBPATH%"

echo export VS_LIBPATH

echo VS_WPATH="%PATH%"

echo export VS_WPATH

EOF

  chmod a+x ${bat}

}

# Create env file

createEnv() # batfile envfile

{

    sed -e 's@//@/@g' > $2

  if [ -f "${1}.stdout" ] ; then

    cat ${1}.stdout 1>&2

  fi

  chmod a+x $2

}

printEnv() # name pname vsname val

{

  name="$1"

  pname="$2"

  vsname="$3"

  val="$4"

  if [ "${val}" != "" ] ; then

    if [ "${shellStyle}" = "csh" ] ; then

      if [ "${debug}" = "true" ] ; then

        echo "setenv ${vsname} \"${val}\";"

      fi

      echo "setenv ${name} \"${val}\";"

    elif [ "${shellStyle}" = "sh" ] ; then

      if [ "${debug}" = "true" ] ; then

        echo "${vsname}=\"${val}\";"

        echo "export ${vsname};"

      fi

      echo "${name}=\"${val}\";"

      echo "export ${name};"

    elif [ "${shellStyle}" = "props" ] ; then

      echo "vs.${pname}=${val}"

    fi

  fi

}

#############################################################################

# Get Visual Studio settings

  # Create bat file to run

  batfile="${tmp}/vs-to-env.bat"