/*

 * Copyright 1998-2007 Sun Microsystems, Inc.  All Rights Reserved.

 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

 *

 * This code is free software; you can redistribute it and/or modify it

 * under the terms of the GNU General Public License version 2 only, as

 * published by the Free Software Foundation.

 *

 * This code is distributed in the hope that it will be useful, but WITHOUT

 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

 * version 2 for more details (a copy is included in the LICENSE file that

 * accompanied this code).

 *

 * You should have received a copy of the GNU General Public License version

 * 2 along with this work; if not, write to the Free Software Foundation,

 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

 *

 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara,

 * CA 95054 USA or visit www.sun.com if you need additional information or

 * have any questions.

 *

 */

#include "incls/_precompiled.incl"

#include "incls/_postaloc.cpp.incl"

// see if this register kind does not requires two registers

static bool is_single_register(uint x) {

#ifdef _LP64

  return (x != Op_RegD && x != Op_RegL && x != Op_RegP);

#else

  return (x != Op_RegD && x != Op_RegL);

#endif

}

//------------------------------may_be_copy_of_callee-----------------------------

// Check to see if we can possibly be a copy of a callee-save value.

bool PhaseChaitin::may_be_copy_of_callee( Node *def ) const {

  // Short circuit if there are no callee save registers

  if (_matcher.number_of_saved_registers() == 0) return false;

  // Expect only a spill-down and reload on exit for callee-save spills.

  // Chains of copies cannot be deep.

  // 5008997 - This is wishful thinking. Register allocator seems to

  // be splitting live ranges for callee save registers to such

  // an extent that in large methods the chains can be very long

  // (50+). The conservative answer is to return true if we don't

  // know as this prevents optimizations from occuring.

  const int limit = 60;

  int i;

  for( i=0; i < limit; i++ ) {

    if( def->is_Proj() && def->in(0)->is_Start() &&

        _matcher.is_save_on_entry(lrgs(n2lidx(def)).reg()) )

      return true;              // Direct use of callee-save proj

    if( def->is_Copy() )        // Copies carry value through

      def = def->in(def->is_Copy());

    else if( def->is_Phi() )    // Phis can merge it from any direction

      def = def->in(1);

    else

      break;

    guarantee(def != NULL, "must not resurrect dead copy");

  }

  // If we reached the end and didn't find a callee save proj

  // then this may be a callee save proj so we return true

  // as the conservative answer. If we didn't reach then end

  // we must have discovered that it was not a callee save

  // else we would have returned.

  return i == limit;

}

//------------------------------yank_if_dead-----------------------------------

// Removed an edge from 'old'.  Yank if dead.  Return adjustment counts to

// iterators in the current block.

int PhaseChaitin::yank_if_dead( Node *old, Block *current_block, Node_List *value, Node_List *regnd ) {

  int blk_adjust=0;

  while (old->outcnt() == 0 && old != C->top()) {

    Block *oldb = _cfg._bbs[old->_idx];

    oldb->find_remove(old);

    // Count 1 if deleting an instruction from the current block

    if( oldb == current_block ) blk_adjust++;

    _cfg._bbs.map(old->_idx,NULL);

    OptoReg::Name old_reg = lrgs(n2lidx(old)).reg();

    if( regnd && (*regnd)[old_reg]==old ) { // Instruction is currently available?

      value->map(old_reg,NULL);  // Yank from value/regnd maps

      regnd->map(old_reg,NULL);  // This register's value is now unknown

    }

    Node *tmp = old->req() > 1 ? old->in(1) : NULL;

    old->disconnect_inputs(NULL);

    if( !tmp ) break;

    old = tmp;

  }

  return blk_adjust;

}

//------------------------------use_prior_register-----------------------------

// Use the prior value instead of the current value, in an effort to make

// the current value go dead.  Return block iterator adjustment, in case

// we yank some instructions from this block.

int PhaseChaitin::use_prior_register( Node *n, uint idx, Node *def, Block *current_block, Node_List &value, Node_List &regnd ) {

  // No effect?

  if( def == n->in(idx) ) return 0;

  // Def is currently dead and can be removed?  Do not resurrect

  if( def->outcnt() == 0 ) return 0;

  // Not every pair of physical registers are assignment compatible,

  // e.g. on sparc floating point registers are not assignable to integer

  // registers.

  const LRG &def_lrg = lrgs(n2lidx(def));

  OptoReg::Name def_reg = def_lrg.reg();

  const RegMask &use_mask = n->in_RegMask(idx);

  bool can_use = ( RegMask::can_represent(def_reg) ? (use_mask.Member(def_reg) != 0)

                                                   : (use_mask.is_AllStack() != 0));

  // Check for a copy to or from a misaligned pair.

  can_use = can_use && !use_mask.is_misaligned_Pair() && !def_lrg.mask().is_misaligned_Pair();

  if (!can_use)

    return 0;

  // Capture the old def in case it goes dead...

  Node *old = n->in(idx);

  // Save-on-call copies can only be elided if the entire copy chain can go

  // away, lest we get the same callee-save value alive in 2 locations at

  // once.  We check for the obvious trivial case here.  Although it can

  // sometimes be elided with cooperation outside our scope, here we will just

  // miss the opportunity.  :-(

  if( may_be_copy_of_callee(def) ) {

    if( old->outcnt() > 1 ) return 0; // We're the not last user

    int idx = old->is_Copy();

    assert( idx, "chain of copies being removed" );

    Node *old2 = old->in(idx);  // Chain of copies

    if( old2->outcnt() > 1 ) return 0; // old is not the last user

    int idx2 = old2->is_Copy();

    if( !idx2 ) return 0;       // Not a chain of 2 copies

    if( def != old2->in(idx2) ) return 0; // Chain of exactly 2 copies

  }

  // Use the new def

  n->set_req(idx,def);

  _post_alloc++;

  // Is old def now dead?  We successfully yanked a copy?

  return yank_if_dead(old,current_block,&value,&regnd);

}

//------------------------------skip_copies------------------------------------

// Skip through any number of copies (that don't mod oop-i-ness)

Node *PhaseChaitin::skip_copies( Node *c ) {

  int idx = c->is_Copy();

  uint is_oop = lrgs(n2lidx(c))._is_oop;

  while (idx != 0) {

    guarantee(c->in(idx) != NULL, "must not resurrect dead copy");

    if (lrgs(n2lidx(c->in(idx)))._is_oop != is_oop)

      break;  // casting copy, not the same value

    c = c->in(idx);

    idx = c->is_Copy();

  }

  return c;

}

//------------------------------elide_copy-------------------------------------

// Remove (bypass) copies along Node n, edge k.

int PhaseChaitin::elide_copy( Node *n, int k, Block *current_block, Node_List &value, Node_List &regnd, bool can_change_regs ) {

  int blk_adjust = 0;

  uint nk_idx = n2lidx(n->in(k));

  OptoReg::Name nk_reg = lrgs(nk_idx ).reg();

  // Remove obvious same-register copies

  Node *x = n->in(k);

  int idx;

  while( (idx=x->is_Copy()) != 0 ) {

    Node *copy = x->in(idx);

    guarantee(copy != NULL, "must not resurrect dead copy");

    if( lrgs(n2lidx(copy)).reg() != nk_reg ) break;

    blk_adjust += use_prior_register(n,k,copy,current_block,value,regnd);

    if( n->in(k) != copy ) break; // Failed for some cutout?

    x = copy;                   // Progress, try again

  }

  // Phis and 2-address instructions cannot change registers so easily - their

  // outputs must match their input.

  if( !can_change_regs )

    return blk_adjust;          // Only check stupid copies!

  // Loop backedges won't have a value-mapping yet

  if( &value == NULL ) return blk_adjust;

  // Skip through all copies to the _value_ being used.  Do not change from

  // int to pointer.  This attempts to jump through a chain of copies, where

  // intermediate copies might be illegal, i.e., value is stored down to stack

  // then reloaded BUT survives in a register the whole way.

  Node *val = skip_copies(n->in(k));

  if( val == x ) return blk_adjust; // No progress?

  bool single = is_single_register(val->ideal_reg());

  uint val_idx = n2lidx(val);

  OptoReg::Name val_reg = lrgs(val_idx).reg();

  // See if it happens to already be in the correct register!

  // (either Phi's direct register, or the common case of the name

  // never-clobbered original-def register)

  if( value[val_reg] == val &&

      // Doubles check both halves

      ( single || value[val_reg-1] == val ) ) {

    blk_adjust += use_prior_register(n,k,regnd[val_reg],current_block,value,regnd);

    if( n->in(k) == regnd[val_reg] ) // Success!  Quit trying

      return blk_adjust;

  }

  // See if we can skip the copy by changing registers.  Don't change from

  // using a register to using the stack unless we know we can remove a

  // copy-load.  Otherwise we might end up making a pile of Intel cisc-spill

  // ops reading from memory instead of just loading once and using the

  // register.

  // Also handle duplicate copies here.

  const Type *t = val->is_Con() ? val->bottom_type() : NULL;

  // Scan all registers to see if this value is around already

  for( uint reg = 0; reg < (uint)_max_reg; reg++ ) {

    Node *vv = value[reg];

    if( !single ) {             // Doubles check for aligned-adjacent pair

      if( (reg&1)==0 ) continue;  // Wrong half of a pair

      if( vv != value[reg-1] ) continue; // Not a complete pair

    }

    if( vv == val ||            // Got a direct hit?

        (t && vv && vv->bottom_type() == t && vv->is_Mach() &&

         vv->as_Mach()->rule() == val->as_Mach()->rule()) ) { // Or same constant?

      assert( !n->is_Phi(), "cannot change registers at a Phi so easily" );

      if( OptoReg::is_stack(nk_reg) || // CISC-loading from stack OR

          OptoReg::is_reg(reg) || // turning into a register use OR

          regnd[reg]->outcnt()==1 ) { // last use of a spill-load turns into a CISC use

        blk_adjust += use_prior_register(n,k,regnd[reg],current_block,value,regnd);

        if( n->in(k) == regnd[reg] ) // Success!  Quit trying

          return blk_adjust;

      } // End of if not degrading to a stack

    } // End of if found value in another register

  } // End of scan all machine registers

  return blk_adjust;

}

//

// Check if nreg already contains the constant value val.  Normal copy

// elimination doesn't doesn't work on constants because multiple

// nodes can represent the same constant so the type and rule of the

// MachNode must be checked to ensure equivalence.

//

bool PhaseChaitin::eliminate_copy_of_constant(Node* val, Node* n,

                                              Block *current_block,

                                              Node_List& value, Node_List& regnd,

                                              OptoReg::Name nreg, OptoReg::Name nreg2) {

  if (value[nreg] != val && val->is_Con() &&

      value[nreg] != NULL && value[nreg]->is_Con() &&

      (nreg2 == OptoReg::Bad || value[nreg] == value[nreg2]) &&

      value[nreg]->bottom_type() == val->bottom_type() &&

      value[nreg]->as_Mach()->rule() == val->as_Mach()->rule()) {

    // This code assumes that two MachNodes representing constants

    // which have the same rule and the same bottom type will produce

    // identical effects into a register.  This seems like it must be

    // objectively true unless there are hidden inputs to the nodes

    // but if that were to change this code would need to updated.

    // Since they are equivalent the second one if redundant and can

    // be removed.

    //

    // n will be replaced with the old value but n might have

    // kills projections associated with it so remove them now so that

    // yank_if_dead will be able to elminate the copy once the uses

    // have been transferred to the old[value].

    for (DUIterator_Fast imax, i = n->fast_outs(imax); i < imax; i++) {

      Node* use = n->fast_out(i);

      if (use->is_Proj() && use->outcnt() == 0) {

        // Kill projections have no users and one input

        use->set_req(0, C->top());

        yank_if_dead(use, current_block, &value, &regnd);

        --i; --imax;

      }

    }

    _post_alloc++;

    return true;

  }

  return false;

}

//------------------------------post_allocate_copy_removal---------------------

// Post-Allocation peephole copy removal.  We do this in 1 pass over the

// basic blocks.  We maintain a mapping of registers to Nodes (an  array of

// Nodes indexed by machine register or stack slot number).  NULL means that a

// register is not mapped to any Node.  We can (want to have!) have several

// registers map to the same Node.  We walk forward over the instructions

// updating the mapping as we go.  At merge points we force a NULL if we have

// to merge 2 different Nodes into the same register.  Phi functions will give

// us a new Node if there is a proper value merging.  Since the blocks are

// arranged in some RPO, we will visit all parent blocks before visiting any

// successor blocks (except at loops).

//

// If we find a Copy we look to see if the Copy's source register is a stack

// slot and that value has already been loaded into some machine register; if

// so we use machine register directly.  This turns a Load into a reg-reg

// Move.  We also look for reloads of identical constants.

//

// When we see a use from a reg-reg Copy, we will attempt to use the copy's

// source directly and make the copy go dead.

void PhaseChaitin::post_allocate_copy_removal() {

  NOT_PRODUCT( Compile::TracePhase t3("postAllocCopyRemoval", &_t_postAllocCopyRemoval, TimeCompiler); )

  ResourceMark rm;

  // Need a mapping from basic block Node_Lists.  We need a Node_List to

  // map from register number to value-producing Node.

  Node_List **blk2value = NEW_RESOURCE_ARRAY( Node_List *, _cfg._num_blocks+1);

  memset( blk2value, 0, sizeof(Node_List*)*(_cfg._num_blocks+1) );

  // Need a mapping from basic block Node_Lists.  We need a Node_List to

  // map from register number to register-defining Node.

  Node_List **blk2regnd = NEW_RESOURCE_ARRAY( Node_List *, _cfg._num_blocks+1);

  memset( blk2regnd, 0, sizeof(Node_List*)*(_cfg._num_blocks+1) );

  // We keep unused Node_Lists on a free_list to avoid wasting

  // memory.

  GrowableArray<Node_List*> free_list = GrowableArray<Node_List*>(16);

  // For all blocks

  for( uint i = 0; i < _cfg._num_blocks; i++ ) {

    uint j;

    Block *b = _cfg._blocks[i];

    // Count of Phis in block

    uint phi_dex;

    for( phi_dex = 1; phi_dex < b->_nodes.size(); phi_dex++ ) {

      Node *phi = b->_nodes[phi_dex];

      if( !phi->is_Phi() )

        break;

    }

    // If any predecessor has not been visited, we do not know the state

    // of registers at the start.  Check for this, while updating copies

    // along Phi input edges

    bool missing_some_inputs = false;

    Block *freed = NULL;

    for( j = 1; j < b->num_preds(); j++ ) {

      Block *pb = _cfg._bbs[b->pred(j)->_idx];

      // Remove copies along phi edges

      for( uint k=1; k<phi_dex; k++ )

        elide_copy( b->_nodes[k], j, b, *blk2value[pb->_pre_order], *blk2regnd[pb->_pre_order], false );

      if( blk2value[pb->_pre_order] ) { // Have a mapping on this edge?

        // See if this predecessor's mappings have been used by everybody

        // who wants them.  If so, free 'em.

        uint k;

        for( k=0; k<pb->_num_succs; k++ ) {

          Block *pbsucc = pb->_succs[k];

          if( !blk2value[pbsucc->_pre_order] && pbsucc != b )

            break;              // Found a future user

        }

        if( k >= pb->_num_succs ) { // No more uses, free!

          freed = pb;           // Record last block freed

          free_list.push(blk2value[pb->_pre_order]);

          free_list.push(blk2regnd[pb->_pre_order]);

        }

      } else {                  // This block has unvisited (loopback) inputs

        missing_some_inputs = true;

      }

    }

    // Extract Node_List mappings.  If 'freed' is non-zero, we just popped

    // 'freed's blocks off the list

    Node_List &regnd = *(free_list.is_empty() ? new Node_List() : free_list.pop());

    Node_List &value = *(free_list.is_empty() ? new Node_List() : free_list.pop());

    assert( !freed || blk2value[freed->_pre_order] == &value, "" );

    value.map(_max_reg,NULL);

    regnd.map(_max_reg,NULL);

    // Set mappings as OUR mappings

    blk2value[b->_pre_order] = &value;

    blk2regnd[b->_pre_order] = &regnd;

    // Initialize value & regnd for this block

    if( missing_some_inputs ) {

      // Some predecessor has not yet been visited; zap map to empty

      for( uint k = 0; k < (uint)_max_reg; k++ ) {

        value.map(k,NULL);

        regnd.map(k,NULL);

      }

    } else {

      if( !freed ) {            // Didn't get a freebie prior block

        // Must clone some data

        freed = _cfg._bbs[b->pred(1)->_idx];

        Node_List &f_value = *blk2value[freed->_pre_order];

        Node_List &f_regnd = *blk2regnd[freed->_pre_order];

        for( uint k = 0; k < (uint)_max_reg; k++ ) {

          value.map(k,f_value[k]);

          regnd.map(k,f_regnd[k]);

        }

      }

      // Merge all inputs together, setting to NULL any conflicts.

      for( j = 1; j < b->num_preds(); j++ ) {

        Block *pb = _cfg._bbs[b->pred(j)->_idx];

        if( pb == freed ) continue; // Did self already via freelist

        Node_List &p_regnd = *blk2regnd[pb->_pre_order];

        for( uint k = 0; k < (uint)_max_reg; k++ ) {

          if( regnd[k] != p_regnd[k] ) { // Conflict on reaching defs?

            value.map(k,NULL); // Then no value handy

            regnd.map(k,NULL);

          }

        }

      }

    }

    // For all Phi's

    for( j = 1; j < phi_dex; j++ ) {

      uint k;

      Node *phi = b->_nodes[j];

      uint pidx = n2lidx(phi);

      OptoReg::Name preg = lrgs(n2lidx(phi)).reg();

      // Remove copies remaining on edges.  Check for junk phi.

      Node *u = NULL;

      for( k=1; k<phi->req(); k++ ) {

        Node *x = phi->in(k);

        if( phi != x && u != x ) // Found a different input

          u = u ? NodeSentinel : x; // Capture unique input, or NodeSentinel for 2nd input

      }

      if( u != NodeSentinel ) {    // Junk Phi.  Remove

        b->_nodes.remove(j--); phi_dex--;

        _cfg._bbs.map(phi->_idx,NULL);

        phi->replace_by(u);

        phi->disconnect_inputs(NULL);

        continue;

      }

      // Note that if value[pidx] exists, then we merged no new values here

      // and the phi is useless.  This can happen even with the above phi

      // removal for complex flows.  I cannot keep the better known value here

      // because locally the phi appears to define a new merged value.  If I

      // keep the better value then a copy of the phi, being unable to use the

      // global flow analysis, can't "peek through" the phi to the original

      // reaching value and so will act like it's defining a new value.  This

      // can lead to situations where some uses are from the old and some from

      // the new values.  Not illegal by itself but throws the over-strong

      // assert in scheduling.

      if( pidx ) {

        value.map(preg,phi);

        regnd.map(preg,phi);

        OptoReg::Name preg_lo = OptoReg::add(preg,-1);

        if( !is_single_register(phi->ideal_reg()) ) {

          value.map(preg_lo,phi);

          regnd.map(preg_lo,phi);

        }

      }

    }

    // For all remaining instructions

    for( j = phi_dex; j < b->_nodes.size(); j++ ) {

      Node *n = b->_nodes[j];

      if( n->outcnt() == 0 &&   // Dead?

          n != C->top() &&      // (ignore TOP, it has no du info)

          !n->is_Proj() ) {     // fat-proj kills

        j -= yank_if_dead(n,b,&value,&regnd);

        continue;

      }

      // Improve reaching-def info.  Occasionally post-alloc's liveness gives

      // up (at loop backedges, because we aren't doing a full flow pass).

      // The presence of a live use essentially asserts that the use's def is

      // alive and well at the use (or else the allocator fubar'd).  Take

      // advantage of this info to set a reaching def for the use-reg.

      uint k;

      for( k = 1; k < n->req(); k++ ) {

        Node *def = n->in(k);   // n->in(k) is a USE; def is the DEF for this USE

        guarantee(def != NULL, "no disconnected nodes at this point");

        uint useidx = n2lidx(def); // useidx is the live range index for this USE

        if( useidx ) {

          OptoReg::Name ureg = lrgs(useidx).reg();

          if( !value[ureg] ) {

            int idx;            // Skip occasional useless copy

            while( (idx=def->is_Copy()) != 0 &&

                   def->in(idx) != NULL &&  // NULL should not happen

                   ureg == lrgs(n2lidx(def->in(idx))).reg() )

              def = def->in(idx);

            Node *valdef = skip_copies(def); // tighten up val through non-useless copies

            value.map(ureg,valdef); // record improved reaching-def info

            regnd.map(ureg,   def);

            // Record other half of doubles

            OptoReg::Name ureg_lo = OptoReg::add(ureg,-1);

            if( !is_single_register(def->ideal_reg()) &&

                ( !RegMask::can_represent(ureg_lo) ||

                  lrgs(useidx).mask().Member(ureg_lo) ) && // Nearly always adjacent

                !value[ureg_lo] ) {

              value.map(ureg_lo,valdef); // record improved reaching-def info

              regnd.map(ureg_lo,   def);

            }

          }

        }

      }

      const uint two_adr = n->is_Mach() ? n->as_Mach()->two_adr() : 0;

      // Remove copies along input edges

      for( k = 1; k < n->req(); k++ )

        j -= elide_copy( n, k, b, value, regnd, two_adr!=k );

      // Unallocated Nodes define no registers

      uint lidx = n2lidx(n);

      if( !lidx ) continue;

      // Update the register defined by this instruction

      OptoReg::Name nreg = lrgs(lidx).reg();

      // Skip through all copies to the _value_ being defined.

      // Do not change from int to pointer

      Node *val = skip_copies(n);

      uint n_ideal_reg = n->ideal_reg();

      if( is_single_register(n_ideal_reg) ) {

        // If Node 'n' does not change the value mapped by the register,

        // then 'n' is a useless copy.  Do not update the register->node

        // mapping so 'n' will go dead.

        if( value[nreg] != val ) {

          if (eliminate_copy_of_constant(val, n, b, value, regnd, nreg, OptoReg::Bad)) {

            n->replace_by(regnd[nreg]);

            j -= yank_if_dead(n,b,&value,&regnd);

          } else {