#

# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.

# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.

#

# This code is free software; you can redistribute it and/or modify it

# under the terms of the GNU General Public License version 2 only, as

# published by the Free Software Foundation.  Oracle designates this

# particular file as subject to the "Classpath" exception as provided

# by Oracle in the LICENSE file that accompanied this code.

#

# This code is distributed in the hope that it will be useful, but WITHOUT

# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or

# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

# version 2 for more details (a copy is included in the LICENSE file that

# accompanied this code).

#

# You should have received a copy of the GNU General Public License version

# 2 along with this work; if not, write to the Free Software Foundation,

# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

#

# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA

# or visit www.oracle.com if you need additional information or have any

# questions.

#

################################################################

#

# This file contains helper functions for the top-level Makefile that does

# not depend on the spec.gmk file having been read. (The purpose of this

# file is ju to avoid cluttering the top-level Makefile.)

#

################################################################

ifndef _MAKEHELPERS_GMK

_MAKEHELPERS_GMK := 1

##############################

# Stuff to run at include time

##############################

# Find out which variables were passed explicitely on the make command line. These

# will be passed on to sub-makes, overriding spec.gmk settings.

MAKE_ARGS=$(foreach var,$(subst =command,,$(filter %=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var)))))),$(var)="$($(var))")

list_alt_overrides_with_origins=$(filter ALT_%=environment ALT_%=command,$(foreach var,$(.VARIABLES),$(var)=$(firstword $(origin $(var)))))

list_alt_overrides=$(subst =command,,$(subst =environment,,$(list_alt_overrides_with_origins)))

# Store the build times in this directory.

BUILDTIMESDIR=$(OUTPUT_ROOT)/make-support/build-times

# Global targets are possible to run either with or without a SPEC. The prototypical

# global target is "help".

global_targets=help

##############################

# Functions

##############################

define CheckEnvironment

        # Find all environment or command line variables that begin with ALT.

	$(if $(list_alt_overrides),

	  @$(PRINTF) "\nWARNING: You have the following ALT_ variables set:\n"

	  @$(PRINTF) "$(foreach var,$(list_alt_overrides),$(var)=$$$(var))\n"

	  @$(PRINTF) "ALT_ variables are deprecated and will be ignored. Please clean your environment.\n\n"

	)

endef

### Functions for timers

# Record starting time for build of a sub repository.

define RecordStartTime

	$(MKDIR) -p $(BUILDTIMESDIR)

	$(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1

	$(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable

endef

# Record ending time and calculate the difference and store it in a

# easy to read format. Handles builds that cross midnight. Expects

# that a build will never take 24 hours or more.

define RecordEndTime

	$(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1

	$(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable

	$(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \

	    $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \

	    M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \

	    > $(BUILDTIMESDIR)/build_time_diff_$1

endef

# Find all build_time_* files and print their contents in a list sorted

# on the name of the sub repository.

define ReportBuildTimes

	$(BUILD_LOG_WRAPPER) $(PRINTF) -- "----- Build times -------\nStart %s\nEnd   %s\n%s\n%s\n-------------------------\n" \

	    "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \

	    "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \

	    "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \

	    "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"

endef

define ResetAllTimers

  $$(shell $(MKDIR) -p $(BUILDTIMESDIR) && $(RM) $(BUILDTIMESDIR)/build_time_*)

endef

define StartGlobalTimer

	$(call RecordStartTime,TOTAL)

endef

define StopGlobalTimer

	$(call RecordEndTime,TOTAL)

endef

### Functions for managing makefile structure (start/end of makefile and individual targets)

# Do not indent this function, this will add whitespace at the start which the caller won't handle

define GetRealTarget

$(strip $(if $(findstring main-wrapper, $(MAKECMDGOALS)), $(MAIN_TARGETS), \

    $(if $(MAKECMDGOALS),$(MAKECMDGOALS),default)))

endef

# Do not indent this function, this will add whitespace at the start which the caller won't handle

define LastGoal

$(strip $(lastword $(call GetRealTarget)))

endef

# Check if the current target is the final target, as specified by

# the user on the command line. If so, call AtRootMakeEnd.

define CheckIfMakeAtEnd

        # Check if the current target is the last goal

	$(if $(filter $@,$(call LastGoal)),$(call AtMakeEnd))

        # If the target is 'foo-only', check if our goal was stated as 'foo'

	$(if $(filter $@,$(call LastGoal)-only),$(call AtMakeEnd))

endef

# Hook to be called when starting to execute a top-level target

define TargetEnter

	$(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"

	$(call RecordStartTime,$(patsubst %-only,%,$@))

endef

# Hook to be called when finish executing a top-level target

define TargetExit

	$(call RecordEndTime,$(patsubst %-only,%,$@))

	$(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \

	    "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"

endef

# Hook to be called as the very first thing when running a normal build

define AtMakeStart

	$(if $(findstring --jobserver,$(MAKEFLAGS)),$(error make -j is not supported, use make JOBS=n))

	$(call CheckEnvironment)

	$(BUILD_LOG_WRAPPER) $(PRINTF) $(LOG_INFO) "Running make as '$(MAKE) $(MFLAGS) $(MAKE_ARGS)'\n"

	$(BUILD_LOG_WRAPPER) $(PRINTF) "Building $(PRODUCT_NAME) for target '$(call GetRealTarget)' in configuration '$(CONF_NAME)'\n\n"

	$(call StartGlobalTimer)

endef

# Hook to be called as the very last thing for targets that are "top level" targets

define AtMakeEnd

	[ -f $(SJAVAC_SERVER_DIR)/server.port ] && echo Stopping sjavac server && $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true

	$(call StopGlobalTimer)

	$(call ReportBuildTimes)

	@$(PRINTF) "\nFinished building $(PRODUCT_NAME) for target '$(call GetRealTarget)'\n"

	$(call CheckEnvironment)

endef

### Functions for parsing and setting up make options from command-line

define FatalError

  # If the user specificed a "global" target (e.g. 'help'), do not exit but continue running

  $$(if $$(filter-out $(global_targets),$$(call GetRealTarget)),$$(error Cannot continue))

endef

define ParseLogLevel

  ifeq ($$(origin VERBOSE),undefined)

    # Setup logging according to LOG (but only if VERBOSE is not given)

    # If the "nofile" argument is given, act on it and strip it away

    ifneq ($$(findstring nofile,$$(LOG)),)

      # Reset the build log wrapper, regardless of other values

      override BUILD_LOG_WRAPPER=

      # COMMA is defined in spec.gmk, but that is not included yet

      COMMA=,

      # First try to remove ",nofile" if it exists

      LOG_STRIPPED1=$$(subst $$(COMMA)nofile,,$$(LOG))

      # Otherwise just remove "nofile"

      LOG_STRIPPED2=$$(subst nofile,,$$(LOG_STRIPPED1))

      # We might have ended up with a leading comma. Remove it

      LOG_STRIPPED3=$$(strip $$(patsubst $$(COMMA)%,%,$$(LOG_STRIPPED2)))

      LOG_LEVEL:=$$(LOG_STRIPPED3)

    else

      LOG_LEVEL:=$$(LOG)

    endif

    ifeq ($$(LOG_LEVEL),)

      # Set LOG to "warn" as default if not set (and no VERBOSE given)

      override LOG_LEVEL=warn

    endif

    ifeq ($$(LOG_LEVEL),warn)

      VERBOSE=-s

    else ifeq ($$(LOG_LEVEL),info)

      VERBOSE=-s

    else ifeq ($$(LOG_LEVEL),debug)

      VERBOSE=

    else ifeq ($$(LOG_LEVEL),trace)

      VERBOSE=

    else

      $$(info Error: LOG must be one of: warn, info, debug or trace.)

      $$(eval $$(call FatalError))

    endif

  else

    # Provide resonable interpretations of LOG_LEVEL if VERBOSE is given.

    ifeq ($(VERBOSE),)

      LOG_LEVEL:=debug

    else

      LOG_LEVEL:=warn

    endif

    ifneq ($$(LOG),)

      # We have both a VERBOSE and a LOG argument. This is OK only if this is a repeated call by ourselves,

      # but complain if this is the top-level make call.

      ifeq ($$(MAKELEVEL),0)

        $$(info Cannot use LOG=$$(LOG) and VERBOSE=$$(VERBOSE) at the same time. Choose one.)

        $$(eval $$(call FatalError))

      endif

    endif

  endif

endef

define ParseConfAndSpec

  ifneq ($$(filter-out $(global_targets),$$(call GetRealTarget)),)

    # If we only have global targets, no need to bother with SPEC or CONF

    ifneq ($$(origin SPEC),undefined)

      # We have been given a SPEC, check that it works out properly

      ifneq ($$(origin CONF),undefined)

        # We also have a CONF argument. This is OK only if this is a repeated call by ourselves,

        # but complain if this is the top-level make call.

        ifeq ($$(MAKELEVEL),0)

          $$(info Error: Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)

          $$(eval $$(call FatalError))

        endif

      endif

      ifeq ($$(wildcard $$(SPEC)),)

        $$(info Error: Cannot locate spec.gmk, given by SPEC=$$(SPEC).)

        $$(eval $$(call FatalError))

      endif

      # ... OK, we're satisfied, we'll use this SPEC later on

    else

      # Find all spec.gmk files in the build output directory

      output_dir=$$(root_dir)/build

      all_spec_files=$$(wildcard $$(output_dir)/*/spec.gmk)

      ifeq ($$(all_spec_files),)

        $$(info Error: No configurations found for $$(root_dir).)

        $$(info Please run 'bash configure' to create a configuration.)

        $$(eval $$(call FatalError))

      endif

      # Extract the configuration names from the path

      all_confs=$$(patsubst %/spec.gmk,%,$$(patsubst $$(output_dir)/%,%,$$(all_spec_files)))

      ifneq ($$(origin CONF),undefined)

        # User have given a CONF= argument.

        ifeq ($$(CONF),)

          # If given CONF=, match all configurations

          matching_confs=$$(strip $$(all_confs))

        else

          # Otherwise select those that contain the given CONF string

          matching_confs=$$(strip $$(foreach var,$$(all_confs),$$(if $$(findstring $$(CONF),$$(var)),$$(var))))

        endif

        ifeq ($$(matching_confs),)

          $$(info Error: No configurations found matching CONF=$$(CONF).)

          $$(info Available configurations in $$(output_dir):)

          $$(foreach var,$$(all_confs),$$(info * $$(var)))

          $$(eval $$(call FatalError))

        else

          ifeq ($$(words $$(matching_confs)),1)

            $$(info Building '$$(matching_confs)' (matching CONF=$$(CONF)))

          else

            $$(info Building target '$(call GetRealTarget)' in these configurations (matching CONF=$$(CONF)):)

            $$(foreach var,$$(matching_confs),$$(info * $$(var)))

          endif

        endif

        # Create a SPEC definition. This will contain the path to one or more spec.gmk files.

        SPEC=$$(addsuffix /spec.gmk,$$(addprefix $$(output_dir)/,$$(matching_confs)))

      else

        # No CONF or SPEC given, check the available configurations

        ifneq ($$(words $$(all_spec_files)),1)

          $$(info Error: No CONF given, but more than one configuration found.)

          $$(info Available configurations in $$(output_dir):)

          $$(foreach var,$$(all_confs),$$(info * $$(var)))

          $$(info Please retry building with CONF=<config pattern> (or SPEC=<specfile>).)

          $$(eval $$(call FatalError))

        endif

        # We found exactly one configuration, use it

        SPEC=$$(strip $$(all_spec_files))

      endif

    endif

  endif

endef

### Convenience functions from Main.gmk

# Cleans the dir given as $1

define CleanDir

	@$(PRINTF) "Cleaning $(strip $1) build artifacts ..."

	@($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)

	@$(PRINTF) " done\n"

endef

define Clean-gensrc

	@$(PRINTF) "Cleaning gensrc $(if $1,for $(strip $1) )..."

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/gensrc_no_docs/$(strip $1)

	@$(PRINTF) " done\n"

endef

define Clean-java

	@$(PRINTF) "Cleaning java $(if $1,for $(strip $1) )..."

	@$(RM) -r $(JDK_OUTPUTDIR)/modules/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/misc/$(strip $1)

	@$(PRINTF) " done\n"

	@$(PRINTF) "Cleaning headers $(if $1,for $(strip $1)) ..."

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/headers/$(strip $1)

	@$(PRINTF) " done\n"

endef

define Clean-native

	@$(PRINTF) "Cleaning native $(if $1,for $(strip $1) )..."

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/native/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_libs-stripped/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds/$(strip $1)

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_cmds-stripped/$(strip $1)

	@$(PRINTF) " done\n"

endef

define Clean-include

	@$(PRINTF) "Cleaning include $(if $1,for $(strip $1) )..."

	@$(RM) -r $(SUPPORT_OUTPUTDIR)/modules_include/$(strip $1)

	@$(PRINTF) " done\n"

endef

define CleanModule

  $(call Clean-gensrc, $1)

  $(call Clean-java, $1)

  $(call Clean-native, $1)

  $(call Clean-include, $1)

endef

################################################################################

MAKE_TOPDIR_LIST := $(JDK_TOPDIR) $(CORBA_TOPDIR) $(LANGTOOLS_TOPDIR)

MAKE_MAKEDIR_LIST := make

# Helper macro for DeclareRecipesForPhase

# Declare a recipe for calling the module and phase specific makefile.

# If there are multiple makefiles to call, create a rule for each topdir

# that contains a makefile with the target $module-$suffix-$repodir,

# (i.e: java.base-gensrc-jdk)

# Normally there is only one makefile, and the target will just be

# $module-$suffix

# Param 1: Name of list to add targets to

# Param 2: Module name

# Param 3: Topdir

define DeclareRecipeForModuleMakefile

  ifeq ($$($1_MULTIPLE_MAKEFILES), true)

    $2-$$($1_TARGET_SUFFIX): $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)

    $1 += $2-$$($1_TARGET_SUFFIX)-$$(notdir $3)

    $2-$$($1_TARGET_SUFFIX)-$$(notdir $3):

  else

    $2-$$($1_TARGET_SUFFIX):

  endif

	$(ECHO) $(LOG_INFO) "Building $$@"

        ifeq ($$($1_USE_WRAPPER), true)

	  +($(CD) $(SRC_ROOT)/make && $(MAKE) $(MAKE_ARGS) \

	      -f ModuleWrapper.gmk \

	          $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \

	          $$(addsuffix /$$($1_MAKE_SUBDIR), $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \

	          MODULE=$2 MAKEFILE_PREFIX=$$($1_FILE_PREFIX))

        else

	  +($(CD) $$(dir $$(firstword $$(wildcard $$(patsubst %, \

	          $3/%/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, $(MAKE_MAKEDIR_LIST))))) \

	    && $(MAKE) $(MAKE_ARGS) \

	          -f $$($1_FILE_PREFIX)-$2.gmk \

	          $$(addprefix -I, $$(wildcard $$(addprefix $3/, $(MAKE_MAKEDIR_LIST)) \

	          $$(addsuffix /$3, $$(addprefix $3/, $(MAKE_MAKEDIR_LIST))))) \

	          MODULE=$2)

        endif

endef

# Helper macro for DeclareRecipesForPhase

# Param 1: Name of list to add targets to

# Param 2: Module name

define DeclareRecipesForPhaseAndModule

  $1_$2_TOPDIRS := $$(strip $$(sort $$(foreach d, $(MAKE_TOPDIR_LIST), \

      $$(patsubst $$d/%, $$d, $$(filter $$d/%, \

          $$(wildcard $$(patsubst %, %/$$($1_MAKE_SUBDIR)/$$($1_FILE_PREFIX)-$2.gmk, \

          $$(foreach s, $(MAKE_MAKEDIR_LIST), \

              $$(addsuffix /$$s, $(MAKE_TOPDIR_LIST))))))))))

  # Only declare recipes if there are makefiles to call

  ifneq ($$($1_$2_TOPDIRS), )

    $$(foreach d, $$($1_$2_TOPDIRS), \

        $$(eval $$(call DeclareRecipeForModuleMakefile,$1,$2,$$d)))

    $1 += $2-$$($1_TARGET_SUFFIX)

    $1_MODULES += $2

  endif

endef

# Declare recipes for a specific module and build phase if there are makefiles

# present for the specific combination.

# Param 1: Name of list to add targets to

# Named params:

# TARGET_SUFFIX : Suffix of target to create for recipe

# MAKE_SUBDIR : Subdir for this build phase

# FILE_PREFIX : File prefix for this build phase

# USE_WRAPPER : Set to true to use ModuleWrapper.gmk

# CHECK_MODULES : List of modules to try

# MULTIPLE_MAKEFILES : Set to true to handle makefils for the same module in

#                      phase in multiple repos

# Exported variables:

# $1_MODULES : All modules that had rules generated

# $1_TARGETS : All targets generated

define DeclareRecipesForPhase

  $(foreach i,2 3 4 5 6 7, $(if $($i),$(strip $1)_$(strip $($i)))$(NEWLINE))

  $(if $(8),$(error Internal makefile error: Too many arguments to \

      DeclareRecipesForPhase, please update MakeHelper.gmk))

  $$(foreach m, $$($(strip $1)_CHECK_MODULES), \

      $$(eval $$(call DeclareRecipesForPhaseAndModule,$(strip $1),$$m)))

  $(strip $1)_TARGETS := $$($(strip $1))

endef

################################################################################

endif # _MAKEHELPERS_GMK