--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/.hgignore Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,12 @@
+syntax: glob
+
+*~
+
+syntax: regexp
+
+^temp/
+
+^\.dep\.inc
+^dist/
+^build/
+^nbproject/private/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/Makefile Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,128 @@
+#
+# There exist several targets which are by default empty and which can be
+# used for execution of your targets. These targets are usually executed
+# before and after some main targets. They are:
+#
+# .build-pre: called before 'build' target
+# .build-post: called after 'build' target
+# .clean-pre: called before 'clean' target
+# .clean-post: called after 'clean' target
+# .clobber-pre: called before 'clobber' target
+# .clobber-post: called after 'clobber' target
+# .all-pre: called before 'all' target
+# .all-post: called after 'all' target
+# .help-pre: called before 'help' target
+# .help-post: called after 'help' target
+#
+# Targets beginning with '.' are not intended to be called on their own.
+#
+# Main targets can be executed directly, and they are:
+#
+# build build a specific configuration
+# clean remove built files from a configuration
+# clobber remove all built files
+# all build all configurations
+# help print help mesage
+#
+# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+# .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+# Available make variables:
+#
+# CND_BASEDIR base directory for relative paths
+# CND_DISTDIR default top distribution directory (build artifacts)
+# CND_BUILDDIR default top build directory (object files, ...)
+# CONF name of current configuration
+# CND_PLATFORM_${CONF} platform name (current configuration)
+# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
+# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
+# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
+# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
+# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
+# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# build tests
+build-tests: .build-tests-post
+
+.build-tests-pre:
+# Add your pre 'build-tests' code here...
+
+.build-tests-post: .build-tests-impl
+# Add your post 'build-tests' code here...
+
+
+# run tests
+test: .test-post
+
+.test-pre: build-tests
+# Add your pre 'test' code here...
+
+.test-post: .test-impl
+# Add your post 'test' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-Debug.mk Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,77 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a -pre and a -post target defined where you can add customized code.
+#
+# This makefile implements configuration specific macros and targets.
+
+
+# Environment
+MKDIR=mkdir
+CP=cp
+GREP=grep
+NM=nm
+CCADMIN=CCadmin
+RANLIB=ranlib
+CC=gcc
+CCC=g++
+CXX=g++
+FC=gfortran
+AS=as
+
+# Macros
+CND_PLATFORM=GNU-Linux
+CND_DLIB_EXT=so
+CND_CONF=Debug
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+
+# Include project Makefile
+include Makefile
+
+# Object Directory
+OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
+
+# Object Files
+OBJECTFILES=
+
+
+# C Compiler Flags
+CFLAGS=
+
+# CC Compiler Flags
+CCFLAGS=
+CXXFLAGS=
+
+# Fortran Compiler Flags
+FFLAGS=
+
+# Assembler Flags
+ASFLAGS=
+
+# Link Libraries and Options
+LDLIBSOPTIONS=
+
+# Build Targets
+.build-conf: ${BUILD_SUBPROJECTS}
+ "${MAKE}" -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp
+
+${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp: ${OBJECTFILES}
+ ${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
+ ${LINK.c} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp ${OBJECTFILES} ${LDLIBSOPTIONS}
+
+# Subprojects
+.build-subprojects:
+
+# Clean Targets
+.clean-conf: ${CLEAN_SUBPROJECTS}
+ ${RM} -r ${CND_BUILDDIR}/${CND_CONF}
+
+# Subprojects
+.clean-subprojects:
+
+# Enable dependency checking
+.dep.inc: .depcheck-impl
+
+include .dep.inc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-Release.mk Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,77 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a -pre and a -post target defined where you can add customized code.
+#
+# This makefile implements configuration specific macros and targets.
+
+
+# Environment
+MKDIR=mkdir
+CP=cp
+GREP=grep
+NM=nm
+CCADMIN=CCadmin
+RANLIB=ranlib
+CC=gcc
+CCC=g++
+CXX=g++
+FC=gfortran
+AS=as
+
+# Macros
+CND_PLATFORM=GNU-Linux
+CND_DLIB_EXT=so
+CND_CONF=Release
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+
+# Include project Makefile
+include Makefile
+
+# Object Directory
+OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
+
+# Object Files
+OBJECTFILES=
+
+
+# C Compiler Flags
+CFLAGS=
+
+# CC Compiler Flags
+CCFLAGS=
+CXXFLAGS=
+
+# Fortran Compiler Flags
+FFLAGS=
+
+# Assembler Flags
+ASFLAGS=
+
+# Link Libraries and Options
+LDLIBSOPTIONS=
+
+# Build Targets
+.build-conf: ${BUILD_SUBPROJECTS}
+ "${MAKE}" -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp
+
+${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp: ${OBJECTFILES}
+ ${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
+ ${LINK.c} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp ${OBJECTFILES} ${LDLIBSOPTIONS}
+
+# Subprojects
+.build-subprojects:
+
+# Clean Targets
+.clean-conf: ${CLEAN_SUBPROJECTS}
+ ${RM} -r ${CND_BUILDDIR}/${CND_CONF}
+
+# Subprojects
+.clean-subprojects:
+
+# Enable dependency checking
+.dep.inc: .depcheck-impl
+
+include .dep.inc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-impl.mk Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,133 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a pre- and a post- target defined where you can add customization code.
+#
+# This makefile implements macros and targets common to all configurations.
+#
+# NOCDDL
+
+
+# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
+# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
+# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
+# and .clean-reqprojects-conf unless SUB has the value 'no'
+SUB_no=NO
+SUBPROJECTS=${SUB_${SUB}}
+BUILD_SUBPROJECTS_=.build-subprojects
+BUILD_SUBPROJECTS_NO=
+BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
+CLEAN_SUBPROJECTS_=.clean-subprojects
+CLEAN_SUBPROJECTS_NO=
+CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
+
+
+# Project Name
+PROJECTNAME=relpipe-out-tabular.cpp
+
+# Active Configuration
+DEFAULTCONF=Debug
+CONF=${DEFAULTCONF}
+
+# All Configurations
+ALLCONFS=Debug Release
+
+
+# build
+.build-impl: .build-pre .validate-impl .depcheck-impl
+ @#echo "=> Running $@... Configuration=$(CONF)"
+ "${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
+
+
+# clean
+.clean-impl: .clean-pre .validate-impl .depcheck-impl
+ @#echo "=> Running $@... Configuration=$(CONF)"
+ "${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
+
+
+# clobber
+.clobber-impl: .clobber-pre .depcheck-impl
+ @#echo "=> Running $@..."
+ for CONF in ${ALLCONFS}; \
+ do \
+ "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
+ done
+
+# all
+.all-impl: .all-pre .depcheck-impl
+ @#echo "=> Running $@..."
+ for CONF in ${ALLCONFS}; \
+ do \
+ "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
+ done
+
+# build tests
+.build-tests-impl: .build-impl .build-tests-pre
+ @#echo "=> Running $@... Configuration=$(CONF)"
+ "${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
+
+# run tests
+.test-impl: .build-tests-impl .test-pre
+ @#echo "=> Running $@... Configuration=$(CONF)"
+ "${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
+
+# dependency checking support
+.depcheck-impl:
+ @echo "# This code depends on make tool being used" >.dep.inc
+ @if [ -n "${MAKE_VERSION}" ]; then \
+ echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES} \$${TESTOBJECTFILES}))" >>.dep.inc; \
+ echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
+ echo "include \$${DEPFILES}" >>.dep.inc; \
+ echo "endif" >>.dep.inc; \
+ else \
+ echo ".KEEP_STATE:" >>.dep.inc; \
+ echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
+ fi
+
+# configuration validation
+.validate-impl:
+ @if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
+ then \
+ echo ""; \
+ echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
+ echo "See 'make help' for details."; \
+ echo "Current directory: " `pwd`; \
+ echo ""; \
+ fi
+ @if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
+ then \
+ exit 1; \
+ fi
+
+
+# help
+.help-impl: .help-pre
+ @echo "This makefile supports the following configurations:"
+ @echo " ${ALLCONFS}"
+ @echo ""
+ @echo "and the following targets:"
+ @echo " build (default target)"
+ @echo " clean"
+ @echo " clobber"
+ @echo " all"
+ @echo " help"
+ @echo ""
+ @echo "Makefile Usage:"
+ @echo " make [CONF=<CONFIGURATION>] [SUB=no] build"
+ @echo " make [CONF=<CONFIGURATION>] [SUB=no] clean"
+ @echo " make [SUB=no] clobber"
+ @echo " make [SUB=no] all"
+ @echo " make help"
+ @echo ""
+ @echo "Target 'build' will build a specific configuration and, unless 'SUB=no',"
+ @echo " also build subprojects."
+ @echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
+ @echo " also clean subprojects."
+ @echo "Target 'clobber' will remove all built files from all configurations and,"
+ @echo " unless 'SUB=no', also from subprojects."
+ @echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
+ @echo " also build subprojects."
+ @echo "Target 'help' prints this message."
+ @echo ""
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-variables.mk Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,35 @@
+#
+# Generated - do not edit!
+#
+# NOCDDL
+#
+CND_BASEDIR=`pwd`
+CND_BUILDDIR=build
+CND_DISTDIR=dist
+# Debug configuration
+CND_PLATFORM_Debug=GNU-Linux
+CND_ARTIFACT_DIR_Debug=dist/Debug/GNU-Linux
+CND_ARTIFACT_NAME_Debug=relpipe-out-tabular.cpp
+CND_ARTIFACT_PATH_Debug=dist/Debug/GNU-Linux/relpipe-out-tabular.cpp
+CND_PACKAGE_DIR_Debug=dist/Debug/GNU-Linux/package
+CND_PACKAGE_NAME_Debug=relpipe-out-tabular.cpp.tar
+CND_PACKAGE_PATH_Debug=dist/Debug/GNU-Linux/package/relpipe-out-tabular.cpp.tar
+# Release configuration
+CND_PLATFORM_Release=GNU-Linux
+CND_ARTIFACT_DIR_Release=dist/Release/GNU-Linux
+CND_ARTIFACT_NAME_Release=relpipe-out-tabular.cpp
+CND_ARTIFACT_PATH_Release=dist/Release/GNU-Linux/relpipe-out-tabular.cpp
+CND_PACKAGE_DIR_Release=dist/Release/GNU-Linux/package
+CND_PACKAGE_NAME_Release=relpipe-out-tabular.cpp.tar
+CND_PACKAGE_PATH_Release=dist/Release/GNU-Linux/package/relpipe-out-tabular.cpp.tar
+#
+# include compiler specific variables
+#
+# dmake command
+ROOT:sh = test -f nbproject/private/Makefile-variables.mk || \
+ (mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk)
+#
+# gmake command
+.PHONY: $(shell test -f nbproject/private/Makefile-variables.mk || (mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk))
+#
+include nbproject/private/Makefile-variables.mk
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Package-Debug.bash Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,76 @@
+#!/bin/bash -x
+
+#
+# Generated - do not edit!
+#
+
+# Macros
+TOP=`pwd`
+CND_PLATFORM=GNU-Linux
+CND_CONF=Debug
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+CND_DLIB_EXT=so
+NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
+TMPDIRNAME=tmp-packaging
+OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp
+OUTPUT_BASENAME=relpipe-out-tabular.cpp
+PACKAGE_TOP_DIR=relpipe-out-tabular.cpp/
+
+# Functions
+function checkReturnCode
+{
+ rc=$?
+ if [ $rc != 0 ]
+ then
+ exit $rc
+ fi
+}
+function makeDirectory
+# $1 directory path
+# $2 permission (optional)
+{
+ mkdir -p "$1"
+ checkReturnCode
+ if [ "$2" != "" ]
+ then
+ chmod $2 "$1"
+ checkReturnCode
+ fi
+}
+function copyFileToTmpDir
+# $1 from-file path
+# $2 to-file path
+# $3 permission
+{
+ cp "$1" "$2"
+ checkReturnCode
+ if [ "$3" != "" ]
+ then
+ chmod $3 "$2"
+ checkReturnCode
+ fi
+}
+
+# Setup
+cd "${TOP}"
+mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
+rm -rf ${NBTMPDIR}
+mkdir -p ${NBTMPDIR}
+
+# Copy files and create directories and links
+cd "${TOP}"
+makeDirectory "${NBTMPDIR}/relpipe-out-tabular.cpp/bin"
+copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
+
+
+# Generate tar file
+cd "${TOP}"
+rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/relpipe-out-tabular.cpp.tar
+cd ${NBTMPDIR}
+tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/relpipe-out-tabular.cpp.tar *
+checkReturnCode
+
+# Cleanup
+cd "${TOP}"
+rm -rf ${NBTMPDIR}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Package-Release.bash Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,76 @@
+#!/bin/bash -x
+
+#
+# Generated - do not edit!
+#
+
+# Macros
+TOP=`pwd`
+CND_PLATFORM=GNU-Linux
+CND_CONF=Release
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+CND_DLIB_EXT=so
+NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
+TMPDIRNAME=tmp-packaging
+OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/relpipe-out-tabular.cpp
+OUTPUT_BASENAME=relpipe-out-tabular.cpp
+PACKAGE_TOP_DIR=relpipe-out-tabular.cpp/
+
+# Functions
+function checkReturnCode
+{
+ rc=$?
+ if [ $rc != 0 ]
+ then
+ exit $rc
+ fi
+}
+function makeDirectory
+# $1 directory path
+# $2 permission (optional)
+{
+ mkdir -p "$1"
+ checkReturnCode
+ if [ "$2" != "" ]
+ then
+ chmod $2 "$1"
+ checkReturnCode
+ fi
+}
+function copyFileToTmpDir
+# $1 from-file path
+# $2 to-file path
+# $3 permission
+{
+ cp "$1" "$2"
+ checkReturnCode
+ if [ "$3" != "" ]
+ then
+ chmod $3 "$2"
+ checkReturnCode
+ fi
+}
+
+# Setup
+cd "${TOP}"
+mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
+rm -rf ${NBTMPDIR}
+mkdir -p ${NBTMPDIR}
+
+# Copy files and create directories and links
+cd "${TOP}"
+makeDirectory "${NBTMPDIR}/relpipe-out-tabular.cpp/bin"
+copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
+
+
+# Generate tar file
+cd "${TOP}"
+rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/relpipe-out-tabular.cpp.tar
+cd ${NBTMPDIR}
+tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/relpipe-out-tabular.cpp.tar *
+checkReturnCode
+
+# Cleanup
+cd "${TOP}"
+rm -rf ${NBTMPDIR}
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/configurations.xml Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,61 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="100">
+ <logicalFolder name="root" displayName="root" projectFiles="true" kind="ROOT">
+ <logicalFolder name="HeaderFiles"
+ displayName="Header Files"
+ projectFiles="true">
+ </logicalFolder>
+ <logicalFolder name="ResourceFiles"
+ displayName="Resource Files"
+ projectFiles="true">
+ </logicalFolder>
+ <logicalFolder name="SourceFiles"
+ displayName="Source Files"
+ projectFiles="true">
+ </logicalFolder>
+ <logicalFolder name="TestFiles"
+ displayName="Test Files"
+ projectFiles="false"
+ kind="TEST_LOGICAL_FOLDER">
+ </logicalFolder>
+ <logicalFolder name="ExternalFiles"
+ displayName="Important Files"
+ projectFiles="false"
+ kind="IMPORTANT_FILES_FOLDER">
+ <itemPath>Makefile</itemPath>
+ </logicalFolder>
+ </logicalFolder>
+ <projectmakefile>Makefile</projectmakefile>
+ <confs>
+ <conf name="Debug" type="1">
+ <toolsSet>
+ <compilerSet>default</compilerSet>
+ <dependencyChecking>true</dependencyChecking>
+ <rebuildPropChanged>false</rebuildPropChanged>
+ </toolsSet>
+ <compileType>
+ </compileType>
+ </conf>
+ <conf name="Release" type="1">
+ <toolsSet>
+ <compilerSet>default</compilerSet>
+ <dependencyChecking>true</dependencyChecking>
+ <rebuildPropChanged>false</rebuildPropChanged>
+ </toolsSet>
+ <compileType>
+ <cTool>
+ <developmentMode>5</developmentMode>
+ </cTool>
+ <ccTool>
+ <developmentMode>5</developmentMode>
+ </ccTool>
+ <fortranCompilerTool>
+ <developmentMode>5</developmentMode>
+ </fortranCompilerTool>
+ <asmTool>
+ <developmentMode>5</developmentMode>
+ </asmTool>
+ </compileType>
+ </conf>
+ </confs>
+</configurationDescriptor>
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/project.xml Sat Aug 25 11:40:13 2018 +0200
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+ <type>org.netbeans.modules.cnd.makeproject</type>
+ <configuration>
+ <data xmlns="http://www.netbeans.org/ns/make-project/1">
+ <name>relpipe-out-tabular.cpp</name>
+ <c-extensions/>
+ <cpp-extensions/>
+ <header-extensions/>
+ <sourceEncoding>UTF-8</sourceEncoding>
+ <make-dep-projects/>
+ <sourceRootList/>
+ <confList>
+ <confElem>
+ <name>Debug</name>
+ <type>1</type>
+ </confElem>
+ <confElem>
+ <name>Release</name>
+ <type>1</type>
+ </confElem>
+ </confList>
+ <formatting>
+ <project-formatting-style>false</project-formatting-style>
+ </formatting>
+ </data>
+ </configuration>
+</project>