# HG changeset patch
# User František Kučera <franta-hg@frantovo.cz>
# Date 1534703651 -7200
# Node ID 0f855036489e5272b2141e986c6eeaf940699b03

common definitions of constants and types

diff -r 000000000000 -r 0f855036489e .hgignore
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/.hgignore	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,12 @@
+syntax: glob
+
+*~
+
+syntax: regexp
+
+^temp/
+
+^\.dep\.inc
+^dist/
+^build/
+^nbproject/private/
diff -r 000000000000 -r 0f855036489e Makefile
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/Makefile	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,128 @@
+#
+#  There exist several targets which are by default empty and which can be 
+#  used for execution of your targets. These targets are usually executed 
+#  before and after some main targets. They are: 
+#
+#     .build-pre:              called before 'build' target
+#     .build-post:             called after 'build' target
+#     .clean-pre:              called before 'clean' target
+#     .clean-post:             called after 'clean' target
+#     .clobber-pre:            called before 'clobber' target
+#     .clobber-post:           called after 'clobber' target
+#     .all-pre:                called before 'all' target
+#     .all-post:               called after 'all' target
+#     .help-pre:               called before 'help' target
+#     .help-post:              called after 'help' target
+#
+#  Targets beginning with '.' are not intended to be called on their own.
+#
+#  Main targets can be executed directly, and they are:
+#  
+#     build                    build a specific configuration
+#     clean                    remove built files from a configuration
+#     clobber                  remove all built files
+#     all                      build all configurations
+#     help                     print help mesage
+#  
+#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+#  .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+#  Available make variables:
+#
+#     CND_BASEDIR                base directory for relative paths
+#     CND_DISTDIR                default top distribution directory (build artifacts)
+#     CND_BUILDDIR               default top build directory (object files, ...)
+#     CONF                       name of current configuration
+#     CND_PLATFORM_${CONF}       platform name (current configuration)
+#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
+#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
+#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
+#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
+#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
+#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment 
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# build tests
+build-tests: .build-tests-post
+
+.build-tests-pre:
+# Add your pre 'build-tests' code here...
+
+.build-tests-post: .build-tests-impl
+# Add your post 'build-tests' code here...
+
+
+# run tests
+test: .test-post
+
+.test-pre: build-tests
+# Add your pre 'test' code here...
+
+.test-post: .test-impl
+# Add your post 'test' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk
diff -r 000000000000 -r 0f855036489e include/relpipe/protocol/constants.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/relpipe/protocol/constants.h	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,33 @@
+#pragma once
+
+#include <cstdint>
+#include <string>
+
+#include "typedefs.h"
+
+namespace relpipe {
+namespace protocol {
+
+const integer_t DATA_TYPE_ID_BOOLEAN = 1;
+const integer_t DATA_TYPE_ID_INTEGER = 2;
+const integer_t DATA_TYPE_ID_STRING = 3;
+
+const string_t DATA_TYPE_CODE_BOOLEAN = L"boolean";
+const string_t DATA_TYPE_CODE_INTEGER = L"integer";
+const string_t DATA_TYPE_CODE_STRING = L"string";
+
+
+/**
+ * With respect for the tradition and computer pioneers, we use same numbers as in ASCII texts:
+ * 
+ * 1C    FS  ␜  File Separator
+ * 1D    GS  ␝  Group Separator
+ * 1E    RS  ␞  Record Separator
+ * 1F    US  ␟  Unit Separator
+ * 
+ */
+const integer_t DATA_PART_START = 0x1D;
+const integer_t DATA_PART_ROW = 0x1E;
+
+}
+}
\ No newline at end of file
diff -r 000000000000 -r 0f855036489e include/relpipe/protocol/typedefs.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/include/relpipe/protocol/typedefs.h	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,15 @@
+#pragma once
+
+#include <cstdint>
+#include <string>
+
+namespace relpipe {
+namespace protocol {
+
+using octet_t = uint8_t;
+using integer_t = uint64_t;
+using boolean_t = bool;
+using string_t = std::wstring;
+
+}
+}
\ No newline at end of file
diff -r 000000000000 -r 0f855036489e nbproject/Makefile-Debug.mk
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-Debug.mk	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,83 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a -pre and a -post target defined where you can add customized code.
+#
+# This makefile implements configuration specific macros and targets.
+
+
+# Environment
+MKDIR=mkdir
+CP=cp
+GREP=grep
+NM=nm
+CCADMIN=CCadmin
+RANLIB=ranlib
+CC=gcc
+CCC=g++
+CXX=g++
+FC=gfortran
+AS=as
+
+# Macros
+CND_PLATFORM=GNU-Linux
+CND_DLIB_EXT=so
+CND_CONF=Debug
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+
+# Include project Makefile
+include Makefile
+
+# Object Directory
+OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
+
+# Object Files
+OBJECTFILES= \
+	${OBJECTDIR}/protocol.o
+
+
+# C Compiler Flags
+CFLAGS=
+
+# CC Compiler Flags
+CCFLAGS=
+CXXFLAGS=
+
+# Fortran Compiler Flags
+FFLAGS=
+
+# Assembler Flags
+ASFLAGS=
+
+# Link Libraries and Options
+LDLIBSOPTIONS=
+
+# Build Targets
+.build-conf: ${BUILD_SUBPROJECTS}
+	"${MAKE}"  -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+
+${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}: ${OBJECTFILES}
+	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
+	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT} ${OBJECTFILES} ${LDLIBSOPTIONS} -shared -fPIC
+
+${OBJECTDIR}/protocol.o: protocol.cpp
+	${MKDIR} -p ${OBJECTDIR}
+	${RM} "$@.d"
+	$(COMPILE.cc) -g -fPIC  -MMD -MP -MF "$@.d" -o ${OBJECTDIR}/protocol.o protocol.cpp
+
+# Subprojects
+.build-subprojects:
+
+# Clean Targets
+.clean-conf: ${CLEAN_SUBPROJECTS}
+	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
+
+# Subprojects
+.clean-subprojects:
+
+# Enable dependency checking
+.dep.inc: .depcheck-impl
+
+include .dep.inc
diff -r 000000000000 -r 0f855036489e nbproject/Makefile-Release.mk
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-Release.mk	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,83 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a -pre and a -post target defined where you can add customized code.
+#
+# This makefile implements configuration specific macros and targets.
+
+
+# Environment
+MKDIR=mkdir
+CP=cp
+GREP=grep
+NM=nm
+CCADMIN=CCadmin
+RANLIB=ranlib
+CC=gcc
+CCC=g++
+CXX=g++
+FC=gfortran
+AS=as
+
+# Macros
+CND_PLATFORM=GNU-Linux
+CND_DLIB_EXT=so
+CND_CONF=Release
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+
+# Include project Makefile
+include Makefile
+
+# Object Directory
+OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
+
+# Object Files
+OBJECTFILES= \
+	${OBJECTDIR}/protocol.o
+
+
+# C Compiler Flags
+CFLAGS=
+
+# CC Compiler Flags
+CCFLAGS=
+CXXFLAGS=
+
+# Fortran Compiler Flags
+FFLAGS=
+
+# Assembler Flags
+ASFLAGS=
+
+# Link Libraries and Options
+LDLIBSOPTIONS=
+
+# Build Targets
+.build-conf: ${BUILD_SUBPROJECTS}
+	"${MAKE}"  -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+
+${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}: ${OBJECTFILES}
+	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
+	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT} ${OBJECTFILES} ${LDLIBSOPTIONS} -shared -fPIC
+
+${OBJECTDIR}/protocol.o: protocol.cpp
+	${MKDIR} -p ${OBJECTDIR}
+	${RM} "$@.d"
+	$(COMPILE.cc) -O2 -fPIC  -MMD -MP -MF "$@.d" -o ${OBJECTDIR}/protocol.o protocol.cpp
+
+# Subprojects
+.build-subprojects:
+
+# Clean Targets
+.clean-conf: ${CLEAN_SUBPROJECTS}
+	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
+
+# Subprojects
+.clean-subprojects:
+
+# Enable dependency checking
+.dep.inc: .depcheck-impl
+
+include .dep.inc
diff -r 000000000000 -r 0f855036489e nbproject/Makefile-impl.mk
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-impl.mk	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,133 @@
+# 
+# Generated Makefile - do not edit! 
+# 
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a pre- and a post- target defined where you can add customization code.
+#
+# This makefile implements macros and targets common to all configurations.
+#
+# NOCDDL
+
+
+# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
+# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
+# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
+# and .clean-reqprojects-conf unless SUB has the value 'no'
+SUB_no=NO
+SUBPROJECTS=${SUB_${SUB}}
+BUILD_SUBPROJECTS_=.build-subprojects
+BUILD_SUBPROJECTS_NO=
+BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
+CLEAN_SUBPROJECTS_=.clean-subprojects
+CLEAN_SUBPROJECTS_NO=
+CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
+
+
+# Project Name
+PROJECTNAME=relpipe-lib-protocol.cpp
+
+# Active Configuration
+DEFAULTCONF=Debug
+CONF=${DEFAULTCONF}
+
+# All Configurations
+ALLCONFS=Debug Release 
+
+
+# build
+.build-impl: .build-pre .validate-impl .depcheck-impl
+	@#echo "=> Running $@... Configuration=$(CONF)"
+	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
+
+
+# clean
+.clean-impl: .clean-pre .validate-impl .depcheck-impl
+	@#echo "=> Running $@... Configuration=$(CONF)"
+	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
+
+
+# clobber 
+.clobber-impl: .clobber-pre .depcheck-impl
+	@#echo "=> Running $@..."
+	for CONF in ${ALLCONFS}; \
+	do \
+	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
+	done
+
+# all 
+.all-impl: .all-pre .depcheck-impl
+	@#echo "=> Running $@..."
+	for CONF in ${ALLCONFS}; \
+	do \
+	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
+	done
+
+# build tests
+.build-tests-impl: .build-impl .build-tests-pre
+	@#echo "=> Running $@... Configuration=$(CONF)"
+	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
+
+# run tests
+.test-impl: .build-tests-impl .test-pre
+	@#echo "=> Running $@... Configuration=$(CONF)"
+	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
+
+# dependency checking support
+.depcheck-impl:
+	@echo "# This code depends on make tool being used" >.dep.inc
+	@if [ -n "${MAKE_VERSION}" ]; then \
+	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES} \$${TESTOBJECTFILES}))" >>.dep.inc; \
+	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
+	    echo "include \$${DEPFILES}" >>.dep.inc; \
+	    echo "endif" >>.dep.inc; \
+	else \
+	    echo ".KEEP_STATE:" >>.dep.inc; \
+	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
+	fi
+
+# configuration validation
+.validate-impl:
+	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
+	then \
+	    echo ""; \
+	    echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
+	    echo "See 'make help' for details."; \
+	    echo "Current directory: " `pwd`; \
+	    echo ""; \
+	fi
+	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
+	then \
+	    exit 1; \
+	fi
+
+
+# help
+.help-impl: .help-pre
+	@echo "This makefile supports the following configurations:"
+	@echo "    ${ALLCONFS}"
+	@echo ""
+	@echo "and the following targets:"
+	@echo "    build  (default target)"
+	@echo "    clean"
+	@echo "    clobber"
+	@echo "    all"
+	@echo "    help"
+	@echo ""
+	@echo "Makefile Usage:"
+	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] build"
+	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] clean"
+	@echo "    make [SUB=no] clobber"
+	@echo "    make [SUB=no] all"
+	@echo "    make help"
+	@echo ""
+	@echo "Target 'build' will build a specific configuration and, unless 'SUB=no',"
+	@echo "    also build subprojects."
+	@echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
+	@echo "    also clean subprojects."
+	@echo "Target 'clobber' will remove all built files from all configurations and,"
+	@echo "    unless 'SUB=no', also from subprojects."
+	@echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
+	@echo "    also build subprojects."
+	@echo "Target 'help' prints this message."
+	@echo ""
+
diff -r 000000000000 -r 0f855036489e nbproject/Makefile-variables.mk
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Makefile-variables.mk	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,35 @@
+#
+# Generated - do not edit!
+#
+# NOCDDL
+#
+CND_BASEDIR=`pwd`
+CND_BUILDDIR=build
+CND_DISTDIR=dist
+# Debug configuration
+CND_PLATFORM_Debug=GNU-Linux
+CND_ARTIFACT_DIR_Debug=dist/Debug/GNU-Linux
+CND_ARTIFACT_NAME_Debug=librelpipe-lib-protocol.cpp.so
+CND_ARTIFACT_PATH_Debug=dist/Debug/GNU-Linux/librelpipe-lib-protocol.cpp.so
+CND_PACKAGE_DIR_Debug=dist/Debug/GNU-Linux/package
+CND_PACKAGE_NAME_Debug=librelpipe-lib-protocol.cpp.so.tar
+CND_PACKAGE_PATH_Debug=dist/Debug/GNU-Linux/package/librelpipe-lib-protocol.cpp.so.tar
+# Release configuration
+CND_PLATFORM_Release=GNU-Linux
+CND_ARTIFACT_DIR_Release=dist/Release/GNU-Linux
+CND_ARTIFACT_NAME_Release=librelpipe-lib-protocol.cpp.so
+CND_ARTIFACT_PATH_Release=dist/Release/GNU-Linux/librelpipe-lib-protocol.cpp.so
+CND_PACKAGE_DIR_Release=dist/Release/GNU-Linux/package
+CND_PACKAGE_NAME_Release=librelpipe-lib-protocol.cpp.so.tar
+CND_PACKAGE_PATH_Release=dist/Release/GNU-Linux/package/librelpipe-lib-protocol.cpp.so.tar
+#
+# include compiler specific variables
+#
+# dmake command
+ROOT:sh = test -f nbproject/private/Makefile-variables.mk || \
+	(mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk)
+#
+# gmake command
+.PHONY: $(shell test -f nbproject/private/Makefile-variables.mk || (mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk))
+#
+include nbproject/private/Makefile-variables.mk
diff -r 000000000000 -r 0f855036489e nbproject/Package-Debug.bash
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Package-Debug.bash	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,76 @@
+#!/bin/bash -x
+
+#
+# Generated - do not edit!
+#
+
+# Macros
+TOP=`pwd`
+CND_PLATFORM=GNU-Linux
+CND_CONF=Debug
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+CND_DLIB_EXT=so
+NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
+TMPDIRNAME=tmp-packaging
+OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+OUTPUT_BASENAME=librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+PACKAGE_TOP_DIR=librelpipe-lib-protocol.cpp.so/
+
+# Functions
+function checkReturnCode
+{
+    rc=$?
+    if [ $rc != 0 ]
+    then
+        exit $rc
+    fi
+}
+function makeDirectory
+# $1 directory path
+# $2 permission (optional)
+{
+    mkdir -p "$1"
+    checkReturnCode
+    if [ "$2" != "" ]
+    then
+      chmod $2 "$1"
+      checkReturnCode
+    fi
+}
+function copyFileToTmpDir
+# $1 from-file path
+# $2 to-file path
+# $3 permission
+{
+    cp "$1" "$2"
+    checkReturnCode
+    if [ "$3" != "" ]
+    then
+        chmod $3 "$2"
+        checkReturnCode
+    fi
+}
+
+# Setup
+cd "${TOP}"
+mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
+rm -rf ${NBTMPDIR}
+mkdir -p ${NBTMPDIR}
+
+# Copy files and create directories and links
+cd "${TOP}"
+makeDirectory "${NBTMPDIR}/librelpipe-lib-protocol.cpp.so/lib"
+copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}lib/${OUTPUT_BASENAME}" 0644
+
+
+# Generate tar file
+cd "${TOP}"
+rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/librelpipe-lib-protocol.cpp.so.tar
+cd ${NBTMPDIR}
+tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/librelpipe-lib-protocol.cpp.so.tar *
+checkReturnCode
+
+# Cleanup
+cd "${TOP}"
+rm -rf ${NBTMPDIR}
diff -r 000000000000 -r 0f855036489e nbproject/Package-Release.bash
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/Package-Release.bash	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,76 @@
+#!/bin/bash -x
+
+#
+# Generated - do not edit!
+#
+
+# Macros
+TOP=`pwd`
+CND_PLATFORM=GNU-Linux
+CND_CONF=Release
+CND_DISTDIR=dist
+CND_BUILDDIR=build
+CND_DLIB_EXT=so
+NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
+TMPDIRNAME=tmp-packaging
+OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+OUTPUT_BASENAME=librelpipe-lib-protocol.cpp.${CND_DLIB_EXT}
+PACKAGE_TOP_DIR=librelpipe-lib-protocol.cpp.so/
+
+# Functions
+function checkReturnCode
+{
+    rc=$?
+    if [ $rc != 0 ]
+    then
+        exit $rc
+    fi
+}
+function makeDirectory
+# $1 directory path
+# $2 permission (optional)
+{
+    mkdir -p "$1"
+    checkReturnCode
+    if [ "$2" != "" ]
+    then
+      chmod $2 "$1"
+      checkReturnCode
+    fi
+}
+function copyFileToTmpDir
+# $1 from-file path
+# $2 to-file path
+# $3 permission
+{
+    cp "$1" "$2"
+    checkReturnCode
+    if [ "$3" != "" ]
+    then
+        chmod $3 "$2"
+        checkReturnCode
+    fi
+}
+
+# Setup
+cd "${TOP}"
+mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
+rm -rf ${NBTMPDIR}
+mkdir -p ${NBTMPDIR}
+
+# Copy files and create directories and links
+cd "${TOP}"
+makeDirectory "${NBTMPDIR}/librelpipe-lib-protocol.cpp.so/lib"
+copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}lib/${OUTPUT_BASENAME}" 0644
+
+
+# Generate tar file
+cd "${TOP}"
+rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/librelpipe-lib-protocol.cpp.so.tar
+cd ${NBTMPDIR}
+tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/librelpipe-lib-protocol.cpp.so.tar *
+checkReturnCode
+
+# Cleanup
+cd "${TOP}"
+rm -rf ${NBTMPDIR}
diff -r 000000000000 -r 0f855036489e nbproject/configurations.xml
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/configurations.xml	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,88 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="100">
+  <logicalFolder name="root" displayName="root" projectFiles="true" kind="ROOT">
+    <logicalFolder name="HeaderFiles"
+                   displayName="Header Files"
+                   projectFiles="true">
+      <itemPath>include/relpipe/protocol/constants.h</itemPath>
+      <itemPath>include/relpipe/protocol/typedefs.h</itemPath>
+    </logicalFolder>
+    <logicalFolder name="ResourceFiles"
+                   displayName="Resource Files"
+                   projectFiles="true">
+    </logicalFolder>
+    <logicalFolder name="SourceFiles"
+                   displayName="Source Files"
+                   projectFiles="true">
+      <itemPath>protocol.cpp</itemPath>
+    </logicalFolder>
+    <logicalFolder name="TestFiles"
+                   displayName="Test Files"
+                   projectFiles="false"
+                   kind="TEST_LOGICAL_FOLDER">
+    </logicalFolder>
+    <logicalFolder name="ExternalFiles"
+                   displayName="Important Files"
+                   projectFiles="false"
+                   kind="IMPORTANT_FILES_FOLDER">
+      <itemPath>Makefile</itemPath>
+    </logicalFolder>
+  </logicalFolder>
+  <projectmakefile>Makefile</projectmakefile>
+  <confs>
+    <conf name="Debug" type="2">
+      <toolsSet>
+        <compilerSet>default</compilerSet>
+        <dependencyChecking>true</dependencyChecking>
+        <rebuildPropChanged>false</rebuildPropChanged>
+      </toolsSet>
+      <compileType>
+      </compileType>
+      <item path="include/relpipe/protocol/constants.h"
+            ex="false"
+            tool="3"
+            flavor2="0">
+      </item>
+      <item path="include/relpipe/protocol/typedefs.h"
+            ex="false"
+            tool="3"
+            flavor2="0">
+      </item>
+      <item path="protocol.cpp" ex="false" tool="1" flavor2="0">
+      </item>
+    </conf>
+    <conf name="Release" type="2">
+      <toolsSet>
+        <compilerSet>default</compilerSet>
+        <dependencyChecking>true</dependencyChecking>
+        <rebuildPropChanged>false</rebuildPropChanged>
+      </toolsSet>
+      <compileType>
+        <cTool>
+          <developmentMode>5</developmentMode>
+        </cTool>
+        <ccTool>
+          <developmentMode>5</developmentMode>
+        </ccTool>
+        <fortranCompilerTool>
+          <developmentMode>5</developmentMode>
+        </fortranCompilerTool>
+        <asmTool>
+          <developmentMode>5</developmentMode>
+        </asmTool>
+      </compileType>
+      <item path="include/relpipe/protocol/constants.h"
+            ex="false"
+            tool="3"
+            flavor2="0">
+      </item>
+      <item path="include/relpipe/protocol/typedefs.h"
+            ex="false"
+            tool="3"
+            flavor2="0">
+      </item>
+      <item path="protocol.cpp" ex="false" tool="1" flavor2="0">
+      </item>
+    </conf>
+  </confs>
+</configurationDescriptor>
diff -r 000000000000 -r 0f855036489e nbproject/project.xml
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nbproject/project.xml	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+    <type>org.netbeans.modules.cnd.makeproject</type>
+    <configuration>
+        <data xmlns="http://www.netbeans.org/ns/make-project/1">
+            <name>relpipe-lib-protocol.cpp</name>
+            <c-extensions/>
+            <cpp-extensions>cpp</cpp-extensions>
+            <header-extensions>h</header-extensions>
+            <sourceEncoding>UTF-8</sourceEncoding>
+            <make-dep-projects/>
+            <sourceRootList/>
+            <confList>
+                <confElem>
+                    <name>Debug</name>
+                    <type>2</type>
+                </confElem>
+                <confElem>
+                    <name>Release</name>
+                    <type>2</type>
+                </confElem>
+            </confList>
+            <formatting>
+                <project-formatting-style>false</project-formatting-style>
+            </formatting>
+        </data>
+    </configuration>
+</project>
diff -r 000000000000 -r 0f855036489e protocol.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/protocol.cpp	Sun Aug 19 20:34:11 2018 +0200
@@ -0,0 +1,7 @@
+/*
+ * The relpipe-lib-protocol.cpp is a header-only C++ library.
+ * Generated .so file is quite useless and it is not needed to compile this library.
+ * Compilation just validates that the .h file has no severe bugs.
+ * In future, the binary might contain some code for testing purposes.
+ */
+#include "include/relpipe/protocol/constants.h"
\ No newline at end of file