8001931: The new build system whitespace cleanup
Reviewed-by: tbell, simonis, erikj
--- a/NewMakefile.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/NewMakefile.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -37,16 +37,16 @@
# Assume we have GNU make, but check version.
ifeq (,$(findstring 3.81,$(MAKE_VERSION)))
- ifeq (,$(findstring 3.82,$(MAKE_VERSION)))
- $(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
- endif
+ ifeq (,$(findstring 3.82,$(MAKE_VERSION)))
+ $(error This version of GNU Make is too low ($(MAKE_VERSION)). Check your path, or upgrade to 3.81 or newer.)
+ endif
endif
# Locate this Makefile
ifeq ($(filter /%,$(lastword $(MAKEFILE_LIST))),)
- makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
+ makefile_path:=$(CURDIR)/$(lastword $(MAKEFILE_LIST))
else
- makefile_path:=$(lastword $(MAKEFILE_LIST))
+ makefile_path:=$(lastword $(MAKEFILE_LIST))
endif
root_dir:=$(dir $(makefile_path))
@@ -58,27 +58,27 @@
# Now determine if we have zero, one or several configurations to build.
ifeq ($(SPEC),)
- # Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
+ # Since we got past ParseConfAndSpec, we must be building a global target. Do nothing.
else
- ifeq ($(words $(SPEC)),1)
- # We are building a single configuration. This is the normal case. Execute the Main.gmk file.
- include $(root_dir)/common/makefiles/Main.gmk
- else
- # We are building multiple configurations.
- # First, find out the valid targets
- # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
- # available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
- all_phony_targets=$(filter-out $(global_targets) bundles-only, $(strip $(shell \
- $(MAKE) -p -q -f common/makefiles/Main.gmk FRC SPEC=$(firstword $(SPEC)) | \
- grep ^.PHONY: | head -n 1 | cut -d " " -f 2-)))
+ ifeq ($(words $(SPEC)),1)
+ # We are building a single configuration. This is the normal case. Execute the Main.gmk file.
+ include $(root_dir)/common/makefiles/Main.gmk
+ else
+ # We are building multiple configurations.
+ # First, find out the valid targets
+ # Run the makefile with an arbitrary SPEC using -p -q (quiet dry-run and dump rules) to find
+ # available PHONY targets. Use this list as valid targets to pass on to the repeated calls.
+ all_phony_targets=$(filter-out $(global_targets) bundles-only, $(strip $(shell \
+ $(MAKE) -p -q -f common/makefiles/Main.gmk FRC SPEC=$(firstword $(SPEC)) | \
+ grep ^.PHONY: | head -n 1 | cut -d " " -f 2-)))
- $(all_phony_targets):
- @$(foreach spec,$(SPEC),($(MAKE) -f NewMakefile.gmk SPEC=$(spec) \
- $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $@) &&) true
+ $(all_phony_targets):
+ @$(foreach spec,$(SPEC),($(MAKE) -f NewMakefile.gmk SPEC=$(spec) \
+ $(VERBOSE) VERBOSE=$(VERBOSE) LOG_LEVEL=$(LOG_LEVEL) $@) &&) true
- .PHONY: $(all_phony_targets)
+ .PHONY: $(all_phony_targets)
- endif
+ endif
endif
# Include this after a potential spec file has been included so that the bundles target
--- a/common/autoconf/autogen.sh Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/autogen.sh Thu Oct 10 14:58:19 2013 +0200
@@ -62,7 +62,7 @@
# We have custom sources available; also generate configure script
# with custom hooks compiled in.
cat $script_dir/configure.ac | sed -e "s|@DATE_WHEN_GENERATED@|$TIMESTAMP|" | \
- sed -e "s|#CUSTOM_AUTOCONF_INCLUDE|m4_include([$custom_hook])|" | ${AUTOCONF} -W all -I$script_dir - > $custom_script_dir/generated-configure.sh
+ sed -e "s|#CUSTOM_AUTOCONF_INCLUDE|m4_include([$custom_hook])|" | ${AUTOCONF} -W all -I$script_dir - > $custom_script_dir/generated-configure.sh
rm -rf autom4te.cache
else
echo No custom hook found: $custom_hook
--- a/common/autoconf/basics.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/basics.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -24,23 +24,23 @@
#
# Test if $1 is a valid argument to $3 (often is $JAVA passed as $3)
-# If so, then append $1 to $2\
+# If so, then append $1 to $2 \
# Also set JVM_ARG_OK to true/false depending on outcome.
AC_DEFUN([ADD_JVM_ARG_IF_OK],
[
- $ECHO "Check if jvm arg is ok: $1" >&AS_MESSAGE_LOG_FD
- $ECHO "Command: $3 $1 -version" >&AS_MESSAGE_LOG_FD
- OUTPUT=`$3 $1 -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- $2="[$]$2 $1"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&AS_MESSAGE_LOG_FD
- $ECHO "$OUTPUT" >&AS_MESSAGE_LOG_FD
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: $1" >&AS_MESSAGE_LOG_FD
+ $ECHO "Command: $3 $1 -version" >&AS_MESSAGE_LOG_FD
+ OUTPUT=`$3 $1 -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ $2="[$]$2 $1"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&AS_MESSAGE_LOG_FD
+ $ECHO "$OUTPUT" >&AS_MESSAGE_LOG_FD
+ JVM_ARG_OK=false
+ fi
])
# Appends a string to a path variable, only adding the : when needed.
@@ -82,7 +82,7 @@
AC_MSG_ERROR([The path of $1, which resolves as "$path", is not found.])
fi
- $1="`cd "$path"; $THEPWDCMD -L`"
+ $1="`cd "$path"; $THEPWDCMD -L`"
fi
])
@@ -129,78 +129,78 @@
AC_MSG_NOTICE([Resolving $1 (as $path) failed, using $path directly.])
new_path="$path"
fi
-
+
if test "x$new_path" = x; then
- AC_MSG_NOTICE([The path of $1, which resolves as "$complete", is not found.])
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- AC_MSG_NOTICE([This might be caused by spaces in the path, which is not allowed.])
- fi
- AC_MSG_ERROR([Cannot locate the the path of $1])
+ AC_MSG_NOTICE([The path of $1, which resolves as "$complete", is not found.])
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ AC_MSG_NOTICE([This might be caused by spaces in the path, which is not allowed.])
fi
+ AC_MSG_ERROR([Cannot locate the the path of $1])
+ fi
fi
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- $1="$new_complete"
- AC_MSG_NOTICE([Rewriting $1 to "$new_complete"])
- fi
+ $1="$new_complete"
+ AC_MSG_NOTICE([Rewriting $1 to "$new_complete"])
+ fi
])
AC_DEFUN([BASIC_REMOVE_SYMBOLIC_LINKS],
[
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
- if test "x$READLINK" != x; then
- $1=`$READLINK -f [$]$1`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME [$]$1`
- sym_link_file=`$BASENAME [$]$1`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- $1=$sym_link_dir/$sym_link_file
+ if test "x$READLINK" != x; then
+ $1=`$READLINK -f [$]$1`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME [$]$1`
+ sym_link_file=`$BASENAME [$]$1`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ $1=$sym_link_dir/$sym_link_file
fi
+ fi
])
# Register a --with argument but mark it as deprecated
@@ -214,12 +214,12 @@
AC_DEFUN_ONCE([BASIC_INIT],
[
-# Save the original command line. This is passed to us by the wrapper configure script.
-AC_SUBST(CONFIGURE_COMMAND_LINE)
-DATE_WHEN_CONFIGURED=`LANG=C date`
-AC_SUBST(DATE_WHEN_CONFIGURED)
-AC_MSG_NOTICE([Configuration created at $DATE_WHEN_CONFIGURED.])
-AC_MSG_NOTICE([configure script generated at timestamp $DATE_WHEN_GENERATED.])
+ # Save the original command line. This is passed to us by the wrapper configure script.
+ AC_SUBST(CONFIGURE_COMMAND_LINE)
+ DATE_WHEN_CONFIGURED=`LANG=C date`
+ AC_SUBST(DATE_WHEN_CONFIGURED)
+ AC_MSG_NOTICE([Configuration created at $DATE_WHEN_CONFIGURED.])
+ AC_MSG_NOTICE([configure script generated at timestamp $DATE_WHEN_GENERATED.])
])
# Test that variable $1 denoting a program is not empty. If empty, exit with an error.
@@ -227,15 +227,15 @@
# $2: executable name to print in warning (optional)
AC_DEFUN([BASIC_CHECK_NONEMPTY],
[
- if test "x[$]$1" = x; then
- if test "x$2" = x; then
- PROG_NAME=translit($1,A-Z,a-z)
- else
- PROG_NAME=$2
- fi
- AC_MSG_NOTICE([Could not find $PROG_NAME!])
- AC_MSG_ERROR([Cannot continue])
+ if test "x[$]$1" = x; then
+ if test "x$2" = x; then
+ PROG_NAME=translit($1,A-Z,a-z)
+ else
+ PROG_NAME=$2
fi
+ AC_MSG_NOTICE([Could not find $PROG_NAME!])
+ AC_MSG_ERROR([Cannot continue])
+ fi
])
# Does AC_PATH_PROG followed by BASIC_CHECK_NONEMPTY.
@@ -244,8 +244,8 @@
# $2: executable name to look for
AC_DEFUN([BASIC_REQUIRE_PROG],
[
- AC_PATH_PROGS($1, $2)
- BASIC_CHECK_NONEMPTY($1, $2)
+ AC_PATH_PROGS($1, $2)
+ BASIC_CHECK_NONEMPTY($1, $2)
])
# Setup the most fundamental tools that relies on not much else to set up,
@@ -253,171 +253,171 @@
AC_DEFUN_ONCE([BASIC_SETUP_FUNDAMENTAL_TOOLS],
[
-# Start with tools that do not need have cross compilation support
-# and can be expected to be found in the default PATH. These tools are
-# used by configure. Nor are these tools expected to be found in the
-# devkit from the builddeps server either, since they are
-# needed to download the devkit.
+ # Start with tools that do not need have cross compilation support
+ # and can be expected to be found in the default PATH. These tools are
+ # used by configure. Nor are these tools expected to be found in the
+ # devkit from the builddeps server either, since they are
+ # needed to download the devkit.
-# First are all the simple required tools.
-BASIC_REQUIRE_PROG(BASENAME, basename)
-BASIC_REQUIRE_PROG(BASH, bash)
-BASIC_REQUIRE_PROG(CAT, cat)
-BASIC_REQUIRE_PROG(CHMOD, chmod)
-BASIC_REQUIRE_PROG(CMP, cmp)
-BASIC_REQUIRE_PROG(COMM, comm)
-BASIC_REQUIRE_PROG(CP, cp)
-BASIC_REQUIRE_PROG(CPIO, cpio)
-BASIC_REQUIRE_PROG(CUT, cut)
-BASIC_REQUIRE_PROG(DATE, date)
-BASIC_REQUIRE_PROG(DIFF, [gdiff diff])
-BASIC_REQUIRE_PROG(DIRNAME, dirname)
-BASIC_REQUIRE_PROG(ECHO, echo)
-BASIC_REQUIRE_PROG(EXPR, expr)
-BASIC_REQUIRE_PROG(FILE, file)
-BASIC_REQUIRE_PROG(FIND, find)
-BASIC_REQUIRE_PROG(HEAD, head)
-BASIC_REQUIRE_PROG(LN, ln)
-BASIC_REQUIRE_PROG(LS, ls)
-BASIC_REQUIRE_PROG(MKDIR, mkdir)
-BASIC_REQUIRE_PROG(MKTEMP, mktemp)
-BASIC_REQUIRE_PROG(MV, mv)
-BASIC_REQUIRE_PROG(PRINTF, printf)
-BASIC_REQUIRE_PROG(RM, rm)
-BASIC_REQUIRE_PROG(SH, sh)
-BASIC_REQUIRE_PROG(SORT, sort)
-BASIC_REQUIRE_PROG(TAIL, tail)
-BASIC_REQUIRE_PROG(TAR, tar)
-BASIC_REQUIRE_PROG(TEE, tee)
-BASIC_REQUIRE_PROG(TOUCH, touch)
-BASIC_REQUIRE_PROG(TR, tr)
-BASIC_REQUIRE_PROG(UNAME, uname)
-BASIC_REQUIRE_PROG(UNIQ, uniq)
-BASIC_REQUIRE_PROG(WC, wc)
-BASIC_REQUIRE_PROG(WHICH, which)
-BASIC_REQUIRE_PROG(XARGS, xargs)
+ # First are all the simple required tools.
+ BASIC_REQUIRE_PROG(BASENAME, basename)
+ BASIC_REQUIRE_PROG(BASH, bash)
+ BASIC_REQUIRE_PROG(CAT, cat)
+ BASIC_REQUIRE_PROG(CHMOD, chmod)
+ BASIC_REQUIRE_PROG(CMP, cmp)
+ BASIC_REQUIRE_PROG(COMM, comm)
+ BASIC_REQUIRE_PROG(CP, cp)
+ BASIC_REQUIRE_PROG(CPIO, cpio)
+ BASIC_REQUIRE_PROG(CUT, cut)
+ BASIC_REQUIRE_PROG(DATE, date)
+ BASIC_REQUIRE_PROG(DIFF, [gdiff diff])
+ BASIC_REQUIRE_PROG(DIRNAME, dirname)
+ BASIC_REQUIRE_PROG(ECHO, echo)
+ BASIC_REQUIRE_PROG(EXPR, expr)
+ BASIC_REQUIRE_PROG(FILE, file)
+ BASIC_REQUIRE_PROG(FIND, find)
+ BASIC_REQUIRE_PROG(HEAD, head)
+ BASIC_REQUIRE_PROG(LN, ln)
+ BASIC_REQUIRE_PROG(LS, ls)
+ BASIC_REQUIRE_PROG(MKDIR, mkdir)
+ BASIC_REQUIRE_PROG(MKTEMP, mktemp)
+ BASIC_REQUIRE_PROG(MV, mv)
+ BASIC_REQUIRE_PROG(PRINTF, printf)
+ BASIC_REQUIRE_PROG(RM, rm)
+ BASIC_REQUIRE_PROG(SH, sh)
+ BASIC_REQUIRE_PROG(SORT, sort)
+ BASIC_REQUIRE_PROG(TAIL, tail)
+ BASIC_REQUIRE_PROG(TAR, tar)
+ BASIC_REQUIRE_PROG(TEE, tee)
+ BASIC_REQUIRE_PROG(TOUCH, touch)
+ BASIC_REQUIRE_PROG(TR, tr)
+ BASIC_REQUIRE_PROG(UNAME, uname)
+ BASIC_REQUIRE_PROG(UNIQ, uniq)
+ BASIC_REQUIRE_PROG(WC, wc)
+ BASIC_REQUIRE_PROG(WHICH, which)
+ BASIC_REQUIRE_PROG(XARGS, xargs)
-# Then required tools that require some special treatment.
-AC_PROG_AWK
-BASIC_CHECK_NONEMPTY(AWK)
-AC_PROG_GREP
-BASIC_CHECK_NONEMPTY(GREP)
-AC_PROG_EGREP
-BASIC_CHECK_NONEMPTY(EGREP)
-AC_PROG_FGREP
-BASIC_CHECK_NONEMPTY(FGREP)
-AC_PROG_SED
-BASIC_CHECK_NONEMPTY(SED)
+ # Then required tools that require some special treatment.
+ AC_PROG_AWK
+ BASIC_CHECK_NONEMPTY(AWK)
+ AC_PROG_GREP
+ BASIC_CHECK_NONEMPTY(GREP)
+ AC_PROG_EGREP
+ BASIC_CHECK_NONEMPTY(EGREP)
+ AC_PROG_FGREP
+ BASIC_CHECK_NONEMPTY(FGREP)
+ AC_PROG_SED
+ BASIC_CHECK_NONEMPTY(SED)
-AC_PATH_PROGS(NAWK, [nawk gawk awk])
-BASIC_CHECK_NONEMPTY(NAWK)
+ AC_PATH_PROGS(NAWK, [nawk gawk awk])
+ BASIC_CHECK_NONEMPTY(NAWK)
-# Always force rm.
-RM="$RM -f"
+ # Always force rm.
+ RM="$RM -f"
-# pwd behaves differently on various platforms and some don't support the -L flag.
-# Always use the bash builtin pwd to get uniform behavior.
-THEPWDCMD=pwd
+ # pwd behaves differently on various platforms and some don't support the -L flag.
+ # Always use the bash builtin pwd to get uniform behavior.
+ THEPWDCMD=pwd
-# These are not required on all platforms
-AC_PATH_PROG(CYGPATH, cygpath)
-AC_PATH_PROG(READLINK, readlink)
-AC_PATH_PROG(DF, df)
-AC_PATH_PROG(SETFILE, SetFile)
+ # These are not required on all platforms
+ AC_PATH_PROG(CYGPATH, cygpath)
+ AC_PATH_PROG(READLINK, readlink)
+ AC_PATH_PROG(DF, df)
+ AC_PATH_PROG(SETFILE, SetFile)
])
# Setup basic configuration paths, and platform-specific stuff related to PATHs.
AC_DEFUN_ONCE([BASIC_SETUP_PATHS],
[
-# Locate the directory of this script.
-SCRIPT="[$]0"
-AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
+ # Locate the directory of this script.
+ SCRIPT="[$]0"
+ AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
-# Where is the source? It is located two levels above the configure script.
-CURDIR="$PWD"
-cd "$AUTOCONF_DIR/../.."
-SRC_ROOT="`$THEPWDCMD -L`"
+ # Where is the source? It is located two levels above the configure script.
+ CURDIR="$PWD"
+ cd "$AUTOCONF_DIR/../.."
+ SRC_ROOT="`$THEPWDCMD -L`"
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- PATH_SEP=";"
- BASIC_CHECK_PATHS_WINDOWS
-else
- PATH_SEP=":"
-fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ PATH_SEP=";"
+ BASIC_CHECK_PATHS_WINDOWS
+ else
+ PATH_SEP=":"
+ fi
-AC_SUBST(SRC_ROOT)
-AC_SUBST(PATH_SEP)
-cd "$CURDIR"
+ AC_SUBST(SRC_ROOT)
+ AC_SUBST(PATH_SEP)
+ cd "$CURDIR"
-BASIC_FIXUP_PATH(SRC_ROOT)
-BASIC_FIXUP_PATH(CURDIR)
+ BASIC_FIXUP_PATH(SRC_ROOT)
+ BASIC_FIXUP_PATH(CURDIR)
-if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
+ if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
# Add extra search paths on solaris for utilities like ar and as etc...
PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"
-fi
+ fi
-# You can force the sys-root if the sys-root encoded into the cross compiler tools
-# is not correct.
-AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root],
- [pass this sys-root to the compilers and tools (for cross-compiling)])])
+ # You can force the sys-root if the sys-root encoded into the cross compiler tools
+ # is not correct.
+ AC_ARG_WITH(sys-root, [AS_HELP_STRING([--with-sys-root],
+ [pass this sys-root to the compilers and tools (for cross-compiling)])])
-if test "x$with_sys_root" != x; then
- SYS_ROOT=$with_sys_root
-else
- SYS_ROOT=/
-fi
-AC_SUBST(SYS_ROOT)
+ if test "x$with_sys_root" != x; then
+ SYS_ROOT=$with_sys_root
+ else
+ SYS_ROOT=/
+ fi
+ AC_SUBST(SYS_ROOT)
-AC_ARG_WITH([tools-dir], [AS_HELP_STRING([--with-tools-dir],
- [search this directory for compilers and tools (for cross-compiling)])],
- [TOOLS_DIR=$with_tools_dir]
-)
+ AC_ARG_WITH([tools-dir], [AS_HELP_STRING([--with-tools-dir],
+ [search this directory for compilers and tools (for cross-compiling)])],
+ [TOOLS_DIR=$with_tools_dir]
+ )
-AC_ARG_WITH([devkit], [AS_HELP_STRING([--with-devkit],
- [use this directory as base for tools-dir and sys-root (for cross-compiling)])],
- [
- if test "x$with_sys_root" != x; then
- AC_MSG_ERROR([Cannot specify both --with-devkit and --with-sys-root at the same time])
- fi
- BASIC_FIXUP_PATH([with_devkit])
- BASIC_APPEND_TO_PATH([TOOLS_DIR],$with_devkit/bin)
- if test -d "$with_devkit/$host_alias/libc"; then
- SYS_ROOT=$with_devkit/$host_alias/libc
- elif test -d "$with_devkit/$host/sys-root"; then
- SYS_ROOT=$with_devkit/$host/sys-root
- fi
- ])
+ AC_ARG_WITH([devkit], [AS_HELP_STRING([--with-devkit],
+ [use this directory as base for tools-dir and sys-root (for cross-compiling)])],
+ [
+ if test "x$with_sys_root" != x; then
+ AC_MSG_ERROR([Cannot specify both --with-devkit and --with-sys-root at the same time])
+ fi
+ BASIC_FIXUP_PATH([with_devkit])
+ BASIC_APPEND_TO_PATH([TOOLS_DIR],$with_devkit/bin)
+ if test -d "$with_devkit/$host_alias/libc"; then
+ SYS_ROOT=$with_devkit/$host_alias/libc
+ elif test -d "$with_devkit/$host/sys-root"; then
+ SYS_ROOT=$with_devkit/$host/sys-root
+ fi
+ ])
])
AC_DEFUN_ONCE([BASIC_SETUP_OUTPUT_DIR],
[
-AC_ARG_WITH(conf-name, [AS_HELP_STRING([--with-conf-name],
- [use this as the name of the configuration @<:@generated from important configuration options@:>@])],
- [ CONF_NAME=${with_conf_name} ])
+ AC_ARG_WITH(conf-name, [AS_HELP_STRING([--with-conf-name],
+ [use this as the name of the configuration @<:@generated from important configuration options@:>@])],
+ [ CONF_NAME=${with_conf_name} ])
-# Test from where we are running configure, in or outside of src root.
-if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
- || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
- || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
+ # Test from where we are running configure, in or outside of src root.
+ if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
# We are running configure from the src root.
# Create a default ./build/target-variant-debuglevel output root.
if test "x${CONF_NAME}" = x; then
- CONF_NAME="${OPENJDK_TARGET_OS}-${OPENJDK_TARGET_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}"
+ CONF_NAME="${OPENJDK_TARGET_OS}-${OPENJDK_TARGET_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}"
fi
OUTPUT_ROOT="$SRC_ROOT/build/${CONF_NAME}"
$MKDIR -p "$OUTPUT_ROOT"
if test ! -d "$OUTPUT_ROOT"; then
- AC_MSG_ERROR([Could not create build directory $OUTPUT_ROOT])
+ AC_MSG_ERROR([Could not create build directory $OUTPUT_ROOT])
fi
-else
+ else
# We are running configure from outside of the src dir.
# Then use the current directory as output dir!
# If configuration is situated in normal build directory, just use the build
# directory name as configuration name, otherwise use the complete path.
if test "x${CONF_NAME}" = x; then
- CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"`
+ CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"`
fi
OUTPUT_ROOT="$CURDIR"
@@ -428,10 +428,10 @@
# If we have a spec.gmk, we have run here before and we are OK. Otherwise, check for
# other files
files_present=`$LS $OUTPUT_ROOT`
- # Configure has already touched config.log and confdefs.h in the current dir when this check
+ # Configure has already touched config.log and confdefs.h in the current dir when this check
# is performed.
filtered_files=`$ECHO "$files_present" | $SED -e 's/config.log//g' -e 's/confdefs.h//g' -e 's/ //g' \
- | $TR -d '\n'`
+ | $TR -d '\n'`
if test "x$filtered_files" != x; then
AC_MSG_NOTICE([Current directory is $CURDIR.])
AC_MSG_NOTICE([Since this is not the source root, configure will output the configuration here])
@@ -443,46 +443,46 @@
AC_MSG_ERROR([Will not continue creating configuration in $CURDIR])
fi
fi
-fi
-AC_MSG_CHECKING([what configuration name to use])
-AC_MSG_RESULT([$CONF_NAME])
+ fi
+ AC_MSG_CHECKING([what configuration name to use])
+ AC_MSG_RESULT([$CONF_NAME])
-BASIC_FIXUP_PATH(OUTPUT_ROOT)
+ BASIC_FIXUP_PATH(OUTPUT_ROOT)
-AC_SUBST(SPEC, $OUTPUT_ROOT/spec.gmk)
-AC_SUBST(CONF_NAME, $CONF_NAME)
-AC_SUBST(OUTPUT_ROOT, $OUTPUT_ROOT)
+ AC_SUBST(SPEC, $OUTPUT_ROOT/spec.gmk)
+ AC_SUBST(CONF_NAME, $CONF_NAME)
+ AC_SUBST(OUTPUT_ROOT, $OUTPUT_ROOT)
-# Most of the probed defines are put into config.h
-AC_CONFIG_HEADERS([$OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in])
-# The spec.gmk file contains all variables for the make system.
-AC_CONFIG_FILES([$OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in])
-# The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
-AC_CONFIG_FILES([$OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in])
-# The bootcycle-spec.gmk file contains support for boot cycle builds.
-AC_CONFIG_FILES([$OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in])
-# The compare.sh is used to compare the build output to other builds.
-AC_CONFIG_FILES([$OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in])
-# Spec.sh is currently used by compare-objects.sh
-AC_CONFIG_FILES([$OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in])
-# The generated Makefile knows where the spec.gmk is and where the source is.
-# You can run make from the OUTPUT_ROOT, or from the top-level Makefile
-# which will look for generated configurations
-AC_CONFIG_FILES([$OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in])
+ # Most of the probed defines are put into config.h
+ AC_CONFIG_HEADERS([$OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in])
+ # The spec.gmk file contains all variables for the make system.
+ AC_CONFIG_FILES([$OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in])
+ # The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
+ AC_CONFIG_FILES([$OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in])
+ # The bootcycle-spec.gmk file contains support for boot cycle builds.
+ AC_CONFIG_FILES([$OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in])
+ # The compare.sh is used to compare the build output to other builds.
+ AC_CONFIG_FILES([$OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in])
+ # Spec.sh is currently used by compare-objects.sh
+ AC_CONFIG_FILES([$OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in])
+ # The generated Makefile knows where the spec.gmk is and where the source is.
+ # You can run make from the OUTPUT_ROOT, or from the top-level Makefile
+ # which will look for generated configurations
+ AC_CONFIG_FILES([$OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in])
-# Save the arguments given to us
-echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments
+ # Save the arguments given to us
+ echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments
])
AC_DEFUN_ONCE([BASIC_SETUP_LOGGING],
[
-# Setup default logging of stdout and stderr to build.log in the output root.
-BUILD_LOG='$(OUTPUT_ROOT)/build.log'
-BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
-BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
-AC_SUBST(BUILD_LOG)
-AC_SUBST(BUILD_LOG_PREVIOUS)
-AC_SUBST(BUILD_LOG_WRAPPER)
+ # Setup default logging of stdout and stderr to build.log in the output root.
+ BUILD_LOG='$(OUTPUT_ROOT)/build.log'
+ BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
+ BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
+ AC_SUBST(BUILD_LOG)
+ AC_SUBST(BUILD_LOG_PREVIOUS)
+ AC_SUBST(BUILD_LOG_WRAPPER)
])
@@ -581,85 +581,85 @@
AC_DEFUN([BASIC_CHECK_FIND_DELETE],
[
- # Test if find supports -delete
- AC_MSG_CHECKING([if find supports -delete])
- FIND_DELETE="-delete"
+ # Test if find supports -delete
+ AC_MSG_CHECKING([if find supports -delete])
+ FIND_DELETE="-delete"
- DELETEDIR=`$MKTEMP -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
+ DELETEDIR=`$MKTEMP -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
- echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
+ echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
- TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
- if test -f $DELETEDIR/TestIfFindSupportsDelete; then
- # No, it does not.
- rm $DELETEDIR/TestIfFindSupportsDelete
- FIND_DELETE="-exec rm \{\} \+"
- AC_MSG_RESULT([no])
- else
- AC_MSG_RESULT([yes])
- fi
- rmdir $DELETEDIR
- AC_SUBST(FIND_DELETE)
+ TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
+ if test -f $DELETEDIR/TestIfFindSupportsDelete; then
+ # No, it does not.
+ rm $DELETEDIR/TestIfFindSupportsDelete
+ FIND_DELETE="-exec rm \{\} \+"
+ AC_MSG_RESULT([no])
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ rmdir $DELETEDIR
+ AC_SUBST(FIND_DELETE)
])
AC_DEFUN_ONCE([BASIC_SETUP_COMPLEX_TOOLS],
[
-BASIC_CHECK_GNU_MAKE
+ BASIC_CHECK_GNU_MAKE
-BASIC_CHECK_FIND_DELETE
+ BASIC_CHECK_FIND_DELETE
-# These tools might not be installed by default,
-# need hint on how to install them.
-BASIC_REQUIRE_PROG(UNZIP, unzip)
-BASIC_REQUIRE_PROG(ZIP, zip)
+ # These tools might not be installed by default,
+ # need hint on how to install them.
+ BASIC_REQUIRE_PROG(UNZIP, unzip)
+ BASIC_REQUIRE_PROG(ZIP, zip)
-# Non-required basic tools
+ # Non-required basic tools
-AC_PATH_PROG(LDD, ldd)
-if test "x$LDD" = "x"; then
+ AC_PATH_PROG(LDD, ldd)
+ if test "x$LDD" = "x"; then
# List shared lib dependencies is used for
# debug output and checking for forbidden dependencies.
# We can build without it.
LDD="true"
-fi
-AC_PATH_PROG(OTOOL, otool)
-if test "x$OTOOL" = "x"; then
- OTOOL="true"
-fi
-AC_PATH_PROGS(READELF, [readelf greadelf])
-AC_PATH_PROG(HG, hg)
-AC_PATH_PROG(STAT, stat)
-AC_PATH_PROG(TIME, time)
-# Check if it's GNU time
-IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
-if test "x$IS_GNU_TIME" != x; then
- IS_GNU_TIME=yes
-else
- IS_GNU_TIME=no
-fi
-AC_SUBST(IS_GNU_TIME)
+ fi
+ AC_PATH_PROG(OTOOL, otool)
+ if test "x$OTOOL" = "x"; then
+ OTOOL="true"
+ fi
+ AC_PATH_PROGS(READELF, [readelf greadelf])
+ AC_PATH_PROG(HG, hg)
+ AC_PATH_PROG(STAT, stat)
+ AC_PATH_PROG(TIME, time)
+ # Check if it's GNU time
+ IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
+ if test "x$IS_GNU_TIME" != x; then
+ IS_GNU_TIME=yes
+ else
+ IS_GNU_TIME=no
+ fi
+ AC_SUBST(IS_GNU_TIME)
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- BASIC_REQUIRE_PROG(COMM, comm)
-fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ BASIC_REQUIRE_PROG(COMM, comm)
+ fi
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- BASIC_REQUIRE_PROG(XATTR, xattr)
- AC_PATH_PROG(CODESIGN, codesign)
- if test "x$CODESIGN" != "x"; then
- # Verify that the openjdk_codesign certificate is present
- AC_MSG_CHECKING([if openjdk_codesign certificate is present])
- rm -f codesign-testfile
- touch codesign-testfile
- codesign -s openjdk_codesign codesign-testfile 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
- rm -f codesign-testfile
- if test "x$CODESIGN" = x; then
- AC_MSG_RESULT([no])
- else
- AC_MSG_RESULT([yes])
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ BASIC_REQUIRE_PROG(XATTR, xattr)
+ AC_PATH_PROG(CODESIGN, codesign)
+ if test "x$CODESIGN" != "x"; then
+ # Verify that the openjdk_codesign certificate is present
+ AC_MSG_CHECKING([if openjdk_codesign certificate is present])
+ rm -f codesign-testfile
+ touch codesign-testfile
+ codesign -s openjdk_codesign codesign-testfile 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD || CODESIGN=
+ rm -f codesign-testfile
+ if test "x$CODESIGN" = x; then
+ AC_MSG_RESULT([no])
+ else
+ AC_MSG_RESULT([yes])
+ fi
fi
fi
-fi
])
# Check if build directory is on local disk. If not possible to determine,
@@ -669,8 +669,8 @@
# Argument 3: what to do otherwise (remote disk or failure)
AC_DEFUN([BASIC_CHECK_DIR_ON_LOCAL_DISK],
[
- # df -l lists only local disks; if the given directory is not found then
- # a non-zero exit code is given
+ # df -l lists only local disks; if the given directory is not found then
+ # a non-zero exit code is given
if test "x$DF" = x; then
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
# msys does not have df; use Windows "net use" instead.
@@ -707,32 +707,30 @@
AC_DEFUN_ONCE([BASIC_TEST_USABILITY_ISSUES],
[
+ AC_MSG_CHECKING([if build directory is on local disk])
+ BASIC_CHECK_DIR_ON_LOCAL_DISK($OUTPUT_ROOT,
+ [OUTPUT_DIR_IS_LOCAL="yes"],
+ [OUTPUT_DIR_IS_LOCAL="no"])
+ AC_MSG_RESULT($OUTPUT_DIR_IS_LOCAL)
-AC_MSG_CHECKING([if build directory is on local disk])
-BASIC_CHECK_DIR_ON_LOCAL_DISK($OUTPUT_ROOT,
- [OUTPUT_DIR_IS_LOCAL="yes"],
- [OUTPUT_DIR_IS_LOCAL="no"])
-AC_MSG_RESULT($OUTPUT_DIR_IS_LOCAL)
+ BASIC_CHECK_SRC_PERMS
-BASIC_CHECK_SRC_PERMS
-
-# Check if the user has any old-style ALT_ variables set.
-FOUND_ALT_VARIABLES=`env | grep ^ALT_`
+ # Check if the user has any old-style ALT_ variables set.
+ FOUND_ALT_VARIABLES=`env | grep ^ALT_`
-# Before generating output files, test if they exist. If they do, this is a reconfigure.
-# Since we can't properly handle the dependencies for this, warn the user about the situation
-if test -e $OUTPUT_ROOT/spec.gmk; then
- IS_RECONFIGURE=yes
-else
- IS_RECONFIGURE=no
-fi
+ # Before generating output files, test if they exist. If they do, this is a reconfigure.
+ # Since we can't properly handle the dependencies for this, warn the user about the situation
+ if test -e $OUTPUT_ROOT/spec.gmk; then
+ IS_RECONFIGURE=yes
+ else
+ IS_RECONFIGURE=no
+ fi
-if test -e $SRC_ROOT/build/.hide-configure-performance-hints; then
- HIDE_PERFORMANCE_HINTS=yes
-else
- HIDE_PERFORMANCE_HINTS=no
- # Hide it the next time around...
- $TOUCH $SRC_ROOT/build/.hide-configure-performance-hints > /dev/null 2>&1
-fi
-
+ if test -e $SRC_ROOT/build/.hide-configure-performance-hints; then
+ HIDE_PERFORMANCE_HINTS=yes
+ else
+ HIDE_PERFORMANCE_HINTS=no
+ # Hide it the next time around...
+ $TOUCH $SRC_ROOT/build/.hide-configure-performance-hints > /dev/null 2>&1
+ fi
])
--- a/common/autoconf/basics_windows.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/basics_windows.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -145,7 +145,7 @@
# Not in mixed or Windows style, start by that.
new_path=`cmd //c echo $path`
fi
-
+
BASIC_MAKE_WINDOWS_SPACE_SAFE_MSYS([$new_path])
BASIC_WINDOWS_REWRITE_AS_UNIX_PATH(new_path)
if test "x$path" != "x$new_path"; then
@@ -175,8 +175,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -191,8 +191,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -218,9 +218,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
AC_MSG_NOTICE([The path of $1, which resolves as "$new_path", is invalid.])
AC_MSG_NOTICE([Neither "$new_path" nor "$new_path.exe/cmd" can be found])
@@ -254,7 +254,7 @@
# Now try to locate executable using which
new_path=`$WHICH "$new_path" 2> /dev/null`
-
+
if test "x$new_path" = x; then
# Oops. Which didn't find the executable.
# The splitting of arguments from the executable at a space might have been incorrect,
@@ -264,9 +264,9 @@
arguments="EOL"
new_path="$path"
BASIC_WINDOWS_REWRITE_AS_UNIX_PATH(new_path)
-
+
new_path=`$WHICH "$new_path" 2> /dev/null`
-
+
if test "x$new_path" = x; then
# It's still not found. Now this is an unrecoverable error.
AC_MSG_NOTICE([The path of $1, which resolves as "$complete", is not found.])
@@ -302,7 +302,7 @@
[
SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
if test $SRC_ROOT_LENGTH -gt 100; then
- AC_MSG_ERROR([Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported])
+ AC_MSG_ERROR([Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported])
fi
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -311,14 +311,14 @@
AC_MSG_RESULT([$CYGWIN_VERSION])
WINDOWS_ENV_VENDOR='cygwin'
WINDOWS_ENV_VERSION="$CYGWIN_VERSION"
-
+
CYGWIN_VERSION_OK=`$ECHO $CYGWIN_VERSION | $GREP ^1.7.`
if test "x$CYGWIN_VERSION_OK" = x; then
AC_MSG_NOTICE([Your cygwin is too old. You are running $CYGWIN_VERSION, but at least cygwin 1.7 is required. Please upgrade.])
AC_MSG_ERROR([Cannot continue])
fi
if test "x$CYGPATH" = x; then
- AC_MSG_ERROR([Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path])
+ AC_MSG_ERROR([Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path])
fi
AC_MSG_CHECKING([cygwin root directory as unix-style path])
# The cmd output ends with Windows line endings (CR/LF), the grep command will strip that away
@@ -329,13 +329,13 @@
WINDOWS_ENV_ROOT_PATH="$CYGWIN_ROOT_PATH"
test_cygdrive_prefix=`$ECHO $CYGWIN_ROOT_PATH | $GREP ^/cygdrive/`
if test "x$test_cygdrive_prefix" = x; then
- AC_MSG_ERROR([Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c.])
+ AC_MSG_ERROR([Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c.])
fi
elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
AC_MSG_CHECKING([msys release])
MSYS_VERSION=`$UNAME -r`
AC_MSG_RESULT([$MSYS_VERSION])
-
+
WINDOWS_ENV_VENDOR='msys'
WINDOWS_ENV_VERSION="$MSYS_VERSION"
@@ -367,12 +367,12 @@
AC_DEFUN_ONCE([BASIC_COMPILE_FIXPATH],
[
-# When using cygwin or msys, we need a wrapper binary that renames
-# /cygdrive/c/ arguments into c:/ arguments and peeks into
-# @files and rewrites these too! This wrapper binary is
-# called fixpath.
-FIXPATH=
-if test "x$OPENJDK_BUILD_OS" = xwindows; then
+ # When using cygwin or msys, we need a wrapper binary that renames
+ # /cygdrive/c/ arguments into c:/ arguments and peeks into
+ # @files and rewrites these too! This wrapper binary is
+ # called fixpath.
+ FIXPATH=
+ if test "x$OPENJDK_BUILD_OS" = xwindows; then
AC_MSG_CHECKING([if fixpath can be created])
FIXPATH_SRC="$SRC_ROOT/common/src/fixpath.c"
FIXPATH_BIN="$OUTPUT_ROOT/fixpath.exe"
@@ -389,7 +389,7 @@
# @ was chosen as separator to minimize risk of other tools messing around with it
all_unique_prefixes=`echo "${all_fixpath_prefixes@<:@@@:>@}" | tr ' ' '\n' | grep '^/./' | sort | uniq`
fixpath_argument_list=`echo $all_unique_prefixes | tr ' ' '@'`
-
+
FIXPATH="$OUTPUT_ROOT/fixpath -m$fixpath_argument_list"
fi
rm -f $OUTPUT_ROOT/fixpath*
@@ -397,24 +397,24 @@
$CC $FIXPATH_SRC -Fe$FIXPATH_BIN > $OUTPUT_ROOT/fixpath1.log 2>&1
cd $CURDIR
- if test ! -x $OUTPUT_ROOT/fixpath.exe; then
- AC_MSG_RESULT([no])
- cat $OUTPUT_ROOT/fixpath1.log
- AC_MSG_ERROR([Could not create $OUTPUT_ROOT/fixpath.exe])
+ if test ! -x $OUTPUT_ROOT/fixpath.exe; then
+ AC_MSG_RESULT([no])
+ cat $OUTPUT_ROOT/fixpath1.log
+ AC_MSG_ERROR([Could not create $OUTPUT_ROOT/fixpath.exe])
fi
AC_MSG_RESULT([yes])
AC_MSG_CHECKING([if fixpath.exe works])
cd $OUTPUT_ROOT
- $FIXPATH $CC $SRC_ROOT/common/src/fixpath.c -Fe$OUTPUT_ROOT/fixpath2.exe > $OUTPUT_ROOT/fixpath2.log 2>&1
+ $FIXPATH $CC $SRC_ROOT/common/src/fixpath.c -Fe$OUTPUT_ROOT/fixpath2.exe > $OUTPUT_ROOT/fixpath2.log 2>&1
cd $CURDIR
- if test ! -x $OUTPUT_ROOT/fixpath2.exe; then
- AC_MSG_RESULT([no])
- cat $OUTPUT_ROOT/fixpath2.log
- AC_MSG_ERROR([fixpath did not work!])
+ if test ! -x $OUTPUT_ROOT/fixpath2.exe; then
+ AC_MSG_RESULT([no])
+ cat $OUTPUT_ROOT/fixpath2.log
+ AC_MSG_ERROR([fixpath did not work!])
fi
AC_MSG_RESULT([yes])
rm -f $OUTPUT_ROOT/fixpath?.??? $OUTPUT_ROOT/fixpath.obj
-fi
+ fi
-AC_SUBST(FIXPATH)
+ AC_SUBST(FIXPATH)
])
--- a/common/autoconf/boot-jdk.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/boot-jdk.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -44,7 +44,7 @@
AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK did not contain bin/javac; ignoring])
AC_MSG_NOTICE([(This might be an JRE instead of an JDK)])
BOOT_JDK_FOUND=no
- else
+ else
# Do we have an rt.jar? (On MacOSX it is called classes.jar)
if test ! -f "$BOOT_JDK/jre/lib/rt.jar" && test ! -f "$BOOT_JDK/../Classes/classes.jar"; then
AC_MSG_NOTICE([Potential Boot JDK found at $BOOT_JDK did not contain an rt.jar; ignoring])
@@ -79,70 +79,70 @@
# Test: Is bootjdk explicitely set by command line arguments?
AC_DEFUN([BOOTJDK_CHECK_ARGUMENTS],
[
-if test "x$with_boot_jdk" != x; then
+ if test "x$with_boot_jdk" != x; then
BOOT_JDK=$with_boot_jdk
BOOT_JDK_FOUND=maybe
AC_MSG_NOTICE([Found potential Boot JDK using configure arguments])
-fi
+ fi
])
# Test: Is bootjdk available from builddeps?
AC_DEFUN([BOOTJDK_CHECK_BUILDDEPS],
[
- BDEPS_CHECK_MODULE(BOOT_JDK, bootjdk, xxx, [BOOT_JDK_FOUND=maybe], [BOOT_JDK_FOUND=no])
+ BDEPS_CHECK_MODULE(BOOT_JDK, bootjdk, xxx, [BOOT_JDK_FOUND=maybe], [BOOT_JDK_FOUND=no])
])
# Test: Is $JAVA_HOME set?
AC_DEFUN([BOOTJDK_CHECK_JAVA_HOME],
[
- if test "x$JAVA_HOME" != x; then
- JAVA_HOME_PROCESSED="$JAVA_HOME"
- BASIC_FIXUP_PATH(JAVA_HOME_PROCESSED)
- if test ! -d "$JAVA_HOME_PROCESSED"; then
- AC_MSG_NOTICE([Your JAVA_HOME points to a non-existing directory!])
- else
- # Aha, the user has set a JAVA_HOME
- # let us use that as the Boot JDK.
- BOOT_JDK="$JAVA_HOME_PROCESSED"
- BOOT_JDK_FOUND=maybe
- AC_MSG_NOTICE([Found potential Boot JDK using JAVA_HOME])
- fi
+ if test "x$JAVA_HOME" != x; then
+ JAVA_HOME_PROCESSED="$JAVA_HOME"
+ BASIC_FIXUP_PATH(JAVA_HOME_PROCESSED)
+ if test ! -d "$JAVA_HOME_PROCESSED"; then
+ AC_MSG_NOTICE([Your JAVA_HOME points to a non-existing directory!])
+ else
+ # Aha, the user has set a JAVA_HOME
+ # let us use that as the Boot JDK.
+ BOOT_JDK="$JAVA_HOME_PROCESSED"
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using JAVA_HOME])
fi
+ fi
])
# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
AC_DEFUN([BOOTJDK_CHECK_JAVA_IN_PATH_IS_SYMLINK],
[
- AC_PATH_PROG(JAVAC_CHECK, javac)
- AC_PATH_PROG(JAVA_CHECK, java)
- BINARY="$JAVAC_CHECK"
- if test "x$JAVAC_CHECK" = x; then
- BINARY="$JAVA_CHECK"
+ AC_PATH_PROG(JAVAC_CHECK, javac)
+ AC_PATH_PROG(JAVA_CHECK, java)
+ BINARY="$JAVAC_CHECK"
+ if test "x$JAVAC_CHECK" = x; then
+ BINARY="$JAVA_CHECK"
+ fi
+ if test "x$BINARY" != x; then
+ # So there is a java(c) binary, it might be part of a JDK.
+ # Lets find the JDK/JRE directory by following symbolic links.
+ # Linux/GNU systems often have links from /usr/bin/java to
+ # /etc/alternatives/java to the real JDK binary.
+ BASIC_REMOVE_SYMBOLIC_LINKS(BINARY)
+ BOOT_JDK=`dirname "$BINARY"`
+ BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
+ if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
+ # Looks like we found ourselves an JDK
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using java(c) in PATH])
fi
- if test "x$BINARY" != x; then
- # So there is a java(c) binary, it might be part of a JDK.
- # Lets find the JDK/JRE directory by following symbolic links.
- # Linux/GNU systems often have links from /usr/bin/java to
- # /etc/alternatives/java to the real JDK binary.
- BASIC_REMOVE_SYMBOLIC_LINKS(BINARY)
- BOOT_JDK=`dirname "$BINARY"`
- BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
- if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
- # Looks like we found ourselves an JDK
- BOOT_JDK_FOUND=maybe
- AC_MSG_NOTICE([Found potential Boot JDK using java(c) in PATH])
- fi
- fi
+ fi
])
# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
AC_DEFUN([BOOTJDK_CHECK_LIBEXEC_JAVA_HOME],
[
- if test -x /usr/libexec/java_home; then
- BOOT_JDK=`/usr/libexec/java_home`
- BOOT_JDK_FOUND=maybe
- AC_MSG_NOTICE([Found potential Boot JDK using /usr/libexec/java_home])
- fi
+ if test -x /usr/libexec/java_home; then
+ BOOT_JDK=`/usr/libexec/java_home`
+ BOOT_JDK_FOUND=maybe
+ AC_MSG_NOTICE([Found potential Boot JDK using /usr/libexec/java_home])
+ fi
])
# Look for a jdk in the given path. If there are multiple, try to select the newest.
@@ -204,123 +204,123 @@
AC_MSG_CHECKING([for $2 in Boot JDK])
$1=$BOOT_JDK/bin/$2
if test ! -x [$]$1; then
- AC_MSG_RESULT(not found)
- AC_MSG_NOTICE([Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk])
- AC_MSG_ERROR([Could not find $2 in the Boot JDK])
+ AC_MSG_RESULT(not found)
+ AC_MSG_NOTICE([Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk])
+ AC_MSG_ERROR([Could not find $2 in the Boot JDK])
fi
AC_MSG_RESULT(ok)
])
###############################################################################
#
-# We need a Boot JDK to bootstrap the build.
+# We need a Boot JDK to bootstrap the build.
#
AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK],
[
-BOOT_JDK_FOUND=no
-AC_ARG_WITH(boot-jdk, [AS_HELP_STRING([--with-boot-jdk],
- [path to Boot JDK (used to bootstrap build) @<:@probed@:>@])])
+ BOOT_JDK_FOUND=no
+ AC_ARG_WITH(boot-jdk, [AS_HELP_STRING([--with-boot-jdk],
+ [path to Boot JDK (used to bootstrap build) @<:@probed@:>@])])
-# We look for the Boot JDK through various means, going from more certain to
-# more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
-# we detected something (if so, the path to the jdk is in BOOT_JDK). But we
-# must check if this is indeed valid; otherwise we'll continue looking.
+ # We look for the Boot JDK through various means, going from more certain to
+ # more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
+ # we detected something (if so, the path to the jdk is in BOOT_JDK). But we
+ # must check if this is indeed valid; otherwise we'll continue looking.
-# Test: Is bootjdk explicitely set by command line arguments?
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_ARGUMENTS])
-if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
- # Having specified an argument which is incorrect will produce an instant failure;
- # we should not go on looking
- AC_MSG_ERROR([The path given by --with-boot-jdk does not contain a valid Boot JDK])
-fi
+ # Test: Is bootjdk explicitely set by command line arguments?
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_ARGUMENTS])
+ if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
+ # Having specified an argument which is incorrect will produce an instant failure;
+ # we should not go on looking
+ AC_MSG_ERROR([The path given by --with-boot-jdk does not contain a valid Boot JDK])
+ fi
-# Test: Is bootjdk available from builddeps?
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_BUILDDEPS])
+ # Test: Is bootjdk available from builddeps?
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_BUILDDEPS])
-# Test: Is $JAVA_HOME set?
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_HOME])
+ # Test: Is $JAVA_HOME set?
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_HOME])
-# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_LIBEXEC_JAVA_HOME])
+ # Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_LIBEXEC_JAVA_HOME])
-# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_IN_PATH_IS_SYMLINK])
+ # Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_JAVA_IN_PATH_IS_SYMLINK])
-# Test: Is there a JDK installed in default, well-known locations?
-BOOTJDK_DO_CHECK([BOOTJDK_CHECK_WELL_KNOWN_LOCATIONS])
+ # Test: Is there a JDK installed in default, well-known locations?
+ BOOTJDK_DO_CHECK([BOOTJDK_CHECK_WELL_KNOWN_LOCATIONS])
-# If we haven't found anything yet, we've truly lost. Give up.
-if test "x$BOOT_JDK_FOUND" = xno; then
- HELP_MSG_MISSING_DEPENDENCY([openjdk])
- AC_MSG_NOTICE([Could not find a valid Boot JDK. $HELP_MSG])
- AC_MSG_NOTICE([This might be fixed by explicitely setting --with-boot-jdk])
- AC_MSG_ERROR([Cannot continue])
-fi
+ # If we haven't found anything yet, we've truly lost. Give up.
+ if test "x$BOOT_JDK_FOUND" = xno; then
+ HELP_MSG_MISSING_DEPENDENCY([openjdk])
+ AC_MSG_NOTICE([Could not find a valid Boot JDK. $HELP_MSG])
+ AC_MSG_NOTICE([This might be fixed by explicitely setting --with-boot-jdk])
+ AC_MSG_ERROR([Cannot continue])
+ fi
-# Setup proper paths for what we found
-BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
-if test ! -f "$BOOT_RTJAR"; then
+ # Setup proper paths for what we found
+ BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
+ if test ! -f "$BOOT_RTJAR"; then
# On MacOSX it is called classes.jar
BOOT_RTJAR="$BOOT_JDK/../Classes/classes.jar"
if test -f "$BOOT_RTJAR"; then
- # Remove the ..
+ # Remove the ..
BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
fi
-fi
-BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
-BOOT_JDK="$BOOT_JDK"
-AC_SUBST(BOOT_RTJAR)
-AC_SUBST(BOOT_TOOLSJAR)
-AC_SUBST(BOOT_JDK)
+ fi
+ BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
+ BOOT_JDK="$BOOT_JDK"
+ AC_SUBST(BOOT_RTJAR)
+ AC_SUBST(BOOT_TOOLSJAR)
+ AC_SUBST(BOOT_JDK)
-# Setup tools from the Boot JDK.
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVA,java)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAC,javac)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAH,javah)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAP,javap)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAR,jar)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(RMIC,rmic)
-BOOTJDK_CHECK_TOOL_IN_BOOTJDK(NATIVE2ASCII,native2ascii)
+ # Setup tools from the Boot JDK.
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVA,java)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAC,javac)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAH,javah)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAVAP,javap)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(JAR,jar)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(RMIC,rmic)
+ BOOTJDK_CHECK_TOOL_IN_BOOTJDK(NATIVE2ASCII,native2ascii)
-# Finally, set some other options...
+ # Finally, set some other options...
-# When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
-BOOT_JDK_SOURCETARGET="-source 7 -target 7"
-AC_SUBST(BOOT_JDK_SOURCETARGET)
-AC_SUBST(JAVAC_FLAGS)
+ # When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
+ BOOT_JDK_SOURCETARGET="-source 7 -target 7"
+ AC_SUBST(BOOT_JDK_SOURCETARGET)
+ AC_SUBST(JAVAC_FLAGS)
])
AC_DEFUN_ONCE([BOOTJDK_SETUP_BOOT_JDK_ARGUMENTS],
[
-##############################################################################
-#
-# Specify options for anything that is run with the Boot JDK.
-#
-AC_ARG_WITH(boot-jdk-jvmargs, [AS_HELP_STRING([--with-boot-jdk-jvmargs],
- [specify JVM arguments to be passed to all invocations of the Boot JDK, overriding the default values,
- e.g --with-boot-jdk-jvmargs="-Xmx8G -enableassertions"])])
+ ##############################################################################
+ #
+ # Specify options for anything that is run with the Boot JDK.
+ #
+ AC_ARG_WITH(boot-jdk-jvmargs, [AS_HELP_STRING([--with-boot-jdk-jvmargs],
+ [specify JVM arguments to be passed to all invocations of the Boot JDK, overriding the default values,
+ e.g --with-boot-jdk-jvmargs="-Xmx8G -enableassertions"])])
-if test "x$with_boot_jdk_jvmargs" = x; then
+ if test "x$with_boot_jdk_jvmargs" = x; then
# Not all JVM:s accept the same arguments on the command line.
# OpenJDK specific increase in thread stack for JDK build,
# well more specifically, when running javac.
if test "x$BUILD_NUM_BITS" = x32; then
- STACK_SIZE=768
+ STACK_SIZE=768
else
- # Running Javac on a JVM on a 64-bit machine, the stack takes more space
- # since 64-bit pointers are pushed on the stach. Apparently, we need
- # to increase the stack space when javacing the JDK....
- STACK_SIZE=1536
+ # Running Javac on a JVM on a 64-bit machine, the stack takes more space
+ # since 64-bit pointers are pushed on the stach. Apparently, we need
+ # to increase the stack space when javacing the JDK....
+ STACK_SIZE=1536
fi
# Minimum amount of heap memory.
ADD_JVM_ARG_IF_OK([-Xms64M],boot_jdk_jvmargs,[$JAVA])
if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- # Why does macosx need more heap? Its the huge JDK batch.
- ADD_JVM_ARG_IF_OK([-Xmx1600M],boot_jdk_jvmargs,[$JAVA])
+ # Why does macosx need more heap? Its the huge JDK batch.
+ ADD_JVM_ARG_IF_OK([-Xmx1600M],boot_jdk_jvmargs,[$JAVA])
else
- ADD_JVM_ARG_IF_OK([-Xmx1100M],boot_jdk_jvmargs,[$JAVA])
+ ADD_JVM_ARG_IF_OK([-Xmx1100M],boot_jdk_jvmargs,[$JAVA])
fi
# When is adding -client something that speeds up the JVM?
# ADD_JVM_ARG_IF_OK([-client],boot_jdk_jvmargs,[$JAVA])
@@ -329,7 +329,7 @@
ADD_JVM_ARG_IF_OK([-XX:ThreadStackSize=$STACK_SIZE],boot_jdk_jvmargs,[$JAVA])
# Disable special log output when a debug build is used as Boot JDK...
ADD_JVM_ARG_IF_OK([-XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput],boot_jdk_jvmargs,[$JAVA])
-fi
+ fi
-AC_SUBST(BOOT_JDK_JVMARGS, $boot_jdk_jvmargs)
+ AC_SUBST(BOOT_JDK_JVMARGS, $boot_jdk_jvmargs)
])
--- a/common/autoconf/bootcycle-spec.gmk.in Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/bootcycle-spec.gmk.in Thu Oct 10 14:58:19 2013 +0200
@@ -36,7 +36,7 @@
JAVA_EXEC_POS=1
endif
ifneq ($(word $(JAVA_EXEC_POS),$(SJAVAC_SERVER_JAVA)),$(word $(JAVA_EXEC_POS),$(JAVA)))
- $(error Bootcycle builds are not possible if --with-sjavac-server-java is specified)
+ $(error Bootcycle builds are not possible if --with-sjavac-server-java is specified)
endif
--- a/common/autoconf/build-aux/config.guess Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/build-aux/config.guess Thu Oct 10 14:58:19 2013 +0200
@@ -58,6 +58,6 @@
OUT=$REAL_CPU`echo $OUT | sed -e 's/[^-]*//'`
;;
esac
-fi
+fi
echo $OUT
--- a/common/autoconf/build-performance.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/build-performance.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,78 +25,77 @@
AC_DEFUN([BPERF_CHECK_CORES],
[
- AC_MSG_CHECKING([for number of cores])
- NUM_CORES=1
- FOUND_CORES=no
-
- if test -f /proc/cpuinfo; then
- # Looks like a Linux (or cygwin) system
- NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
- FOUND_CORES=yes
- elif test -x /usr/sbin/psrinfo; then
- # Looks like a Solaris system
- NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
- FOUND_CORES=yes
- elif test -x /usr/sbin/system_profiler; then
- # Looks like a MacOSX system
- NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print [$]5}'`
- FOUND_CORES=yes
- elif test -n "$NUMBER_OF_PROCESSORS"; then
- # On windows, look in the env
- NUM_CORES=$NUMBER_OF_PROCESSORS
- FOUND_CORES=yes
- fi
+ AC_MSG_CHECKING([for number of cores])
+ NUM_CORES=1
+ FOUND_CORES=no
- if test "x$FOUND_CORES" = xyes; then
- AC_MSG_RESULT([$NUM_CORES])
- else
- AC_MSG_RESULT([could not detect number of cores, defaulting to 1])
- AC_MSG_WARN([This will disable all parallelism from build!])
- fi
+ if test -f /proc/cpuinfo; then
+ # Looks like a Linux (or cygwin) system
+ NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
+ FOUND_CORES=yes
+ elif test -x /usr/sbin/psrinfo; then
+ # Looks like a Solaris system
+ NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
+ FOUND_CORES=yes
+ elif test -x /usr/sbin/system_profiler; then
+ # Looks like a MacOSX system
+ NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print [$]5}'`
+ FOUND_CORES=yes
+ elif test -n "$NUMBER_OF_PROCESSORS"; then
+ # On windows, look in the env
+ NUM_CORES=$NUMBER_OF_PROCESSORS
+ FOUND_CORES=yes
+ fi
+ if test "x$FOUND_CORES" = xyes; then
+ AC_MSG_RESULT([$NUM_CORES])
+ else
+ AC_MSG_RESULT([could not detect number of cores, defaulting to 1])
+ AC_MSG_WARN([This will disable all parallelism from build!])
+ fi
])
AC_DEFUN([BPERF_CHECK_MEMORY_SIZE],
[
- AC_MSG_CHECKING([for memory size])
- # Default to 1024 MB
- MEMORY_SIZE=1024
- FOUND_MEM=no
-
- if test -f /proc/meminfo; then
- # Looks like a Linux (or cygwin) system
- MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print [$]2}'`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
- FOUND_MEM=yes
- elif test -x /usr/sbin/prtconf; then
- # Looks like a Solaris system
- MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print [$]3 }'`
- FOUND_MEM=yes
- elif test -x /usr/sbin/system_profiler; then
- # Looks like a MacOSX system
- MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print [$]2}'`
- MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
- FOUND_MEM=yes
- elif test "x$OPENJDK_BUILD_OS" = xwindows; then
- # Windows, but without cygwin
- MEMORY_SIZE=`wmic computersystem get totalphysicalmemory -value | grep = | cut -d "=" -f 2-`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
- FOUND_MEM=yes
- fi
+ AC_MSG_CHECKING([for memory size])
+ # Default to 1024 MB
+ MEMORY_SIZE=1024
+ FOUND_MEM=no
- if test "x$FOUND_MEM" = xyes; then
- AC_MSG_RESULT([$MEMORY_SIZE MB])
- else
- AC_MSG_RESULT([could not detect memory size, defaulting to 1024 MB])
- AC_MSG_WARN([This might seriously impact build performance!])
- fi
+ if test -f /proc/meminfo; then
+ # Looks like a Linux (or cygwin) system
+ MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print [$]2}'`
+ MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
+ FOUND_MEM=yes
+ elif test -x /usr/sbin/prtconf; then
+ # Looks like a Solaris system
+ MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print [$]3 }'`
+ FOUND_MEM=yes
+ elif test -x /usr/sbin/system_profiler; then
+ # Looks like a MacOSX system
+ MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print [$]2}'`
+ MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
+ FOUND_MEM=yes
+ elif test "x$OPENJDK_BUILD_OS" = xwindows; then
+ # Windows, but without cygwin
+ MEMORY_SIZE=`wmic computersystem get totalphysicalmemory -value | grep = | cut -d "=" -f 2-`
+ MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
+ FOUND_MEM=yes
+ fi
+
+ if test "x$FOUND_MEM" = xyes; then
+ AC_MSG_RESULT([$MEMORY_SIZE MB])
+ else
+ AC_MSG_RESULT([could not detect memory size, defaulting to 1024 MB])
+ AC_MSG_WARN([This might seriously impact build performance!])
+ fi
])
AC_DEFUN_ONCE([BPERF_SETUP_BUILD_CORES],
[
# How many cores do we have on this build system?
AC_ARG_WITH(num-cores, [AS_HELP_STRING([--with-num-cores],
- [number of cores in the build system, e.g. --with-num-cores=8 @<:@probed@:>@])])
+ [number of cores in the build system, e.g. --with-num-cores=8 @<:@probed@:>@])])
if test "x$with_num_cores" = x; then
# The number of cores were not specified, try to probe them.
BPERF_CHECK_CORES
@@ -110,7 +109,7 @@
[
# How much memory do we have on this build system?
AC_ARG_WITH(memory-size, [AS_HELP_STRING([--with-memory-size],
- [memory (in MB) available in the build system, e.g. --with-memory-size=1024 @<:@probed@:>@])])
+ [memory (in MB) available in the build system, e.g. --with-memory-size=1024 @<:@probed@:>@])])
if test "x$with_memory_size" = x; then
# The memory size was not specified, try to probe it.
BPERF_CHECK_MEMORY_SIZE
@@ -122,10 +121,10 @@
AC_DEFUN_ONCE([BPERF_SETUP_BUILD_JOBS],
[
- # Provide a decent default number of parallel jobs for make depending on
+ # Provide a decent default number of parallel jobs for make depending on
# number of cores, amount of memory and machine architecture.
AC_ARG_WITH(jobs, [AS_HELP_STRING([--with-jobs],
- [number of parallel jobs to let make run @<:@calculated based on cores and memory@:>@])])
+ [number of parallel jobs to let make run @<:@calculated based on cores and memory@:>@])])
if test "x$with_jobs" = x; then
# Number of jobs was not specified, calculate.
AC_MSG_CHECKING([for appropriate number of jobs to run in parallel])
@@ -157,179 +156,178 @@
AC_DEFUN([BPERF_SETUP_CCACHE],
[
- AC_ARG_ENABLE([ccache],
- [AS_HELP_STRING([--disable-ccache],
- [disable using ccache to speed up recompilations @<:@enabled@:>@])],
- [ENABLE_CCACHE=${enable_ccache}], [ENABLE_CCACHE=yes])
- if test "x$ENABLE_CCACHE" = xyes; then
- OLD_PATH="$PATH"
- if test "x$TOOLS_DIR" != x; then
- PATH=$TOOLS_DIR:$PATH
- fi
- AC_PATH_PROG(CCACHE, ccache)
- PATH="$OLD_PATH"
- else
- AC_MSG_CHECKING([for ccache])
- AC_MSG_RESULT([explicitly disabled])
- CCACHE=
- fi
- AC_SUBST(CCACHE)
+ AC_ARG_ENABLE([ccache],
+ [AS_HELP_STRING([--disable-ccache],
+ [disable using ccache to speed up recompilations @<:@enabled@:>@])],
+ [ENABLE_CCACHE=${enable_ccache}], [ENABLE_CCACHE=yes])
+ if test "x$ENABLE_CCACHE" = xyes; then
+ OLD_PATH="$PATH"
+ if test "x$TOOLS_DIR" != x; then
+ PATH=$TOOLS_DIR:$PATH
+ fi
+ AC_PATH_PROG(CCACHE, ccache)
+ PATH="$OLD_PATH"
+ else
+ AC_MSG_CHECKING([for ccache])
+ AC_MSG_RESULT([explicitly disabled])
+ CCACHE=
+ fi
+ AC_SUBST(CCACHE)
- AC_ARG_WITH([ccache-dir],
- [AS_HELP_STRING([--with-ccache-dir],
- [where to store ccache files @<:@~/.ccache@:>@])])
+ AC_ARG_WITH([ccache-dir],
+ [AS_HELP_STRING([--with-ccache-dir],
+ [where to store ccache files @<:@~/.ccache@:>@])])
- if test "x$with_ccache_dir" != x; then
- # When using a non home ccache directory, assume the use is to share ccache files
- # with other users. Thus change the umask.
- SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002"
- fi
- CCACHE_FOUND=""
- if test "x$CCACHE" != x; then
- BPERF_SETUP_CCACHE_USAGE
- fi
+ if test "x$with_ccache_dir" != x; then
+ # When using a non home ccache directory, assume the use is to share ccache files
+ # with other users. Thus change the umask.
+ SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002"
+ fi
+ CCACHE_FOUND=""
+ if test "x$CCACHE" != x; then
+ BPERF_SETUP_CCACHE_USAGE
+ fi
])
AC_DEFUN([BPERF_SETUP_CCACHE_USAGE],
[
- if test "x$CCACHE" != x; then
- CCACHE_FOUND="true"
- # Only use ccache if it is 3.1.4 or later, which supports
- # precompiled headers.
- AC_MSG_CHECKING([if ccache supports precompiled headers])
- HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.@<:@456789@:>@) 2> /dev/null`
- if test "x$HAS_GOOD_CCACHE" = x; then
- AC_MSG_RESULT([no, disabling ccache])
- CCACHE=
- else
- AC_MSG_RESULT([yes])
- AC_MSG_CHECKING([if C-compiler supports ccache precompiled headers])
- PUSHED_FLAGS="$CXXFLAGS"
- CXXFLAGS="-fpch-preprocess $CXXFLAGS"
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [])], [CC_KNOWS_CCACHE_TRICK=yes], [CC_KNOWS_CCACHE_TRICK=no])
- CXXFLAGS="$PUSHED_FLAGS"
- if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no, disabling ccaching of precompiled headers])
- CCACHE=
- fi
- fi
+ if test "x$CCACHE" != x; then
+ CCACHE_FOUND="true"
+ # Only use ccache if it is 3.1.4 or later, which supports
+ # precompiled headers.
+ AC_MSG_CHECKING([if ccache supports precompiled headers])
+ HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.@<:@456789@:>@) 2> /dev/null`
+ if test "x$HAS_GOOD_CCACHE" = x; then
+ AC_MSG_RESULT([no, disabling ccache])
+ CCACHE=
+ else
+ AC_MSG_RESULT([yes])
+ AC_MSG_CHECKING([if C-compiler supports ccache precompiled headers])
+ PUSHED_FLAGS="$CXXFLAGS"
+ CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([], [])], [CC_KNOWS_CCACHE_TRICK=yes], [CC_KNOWS_CCACHE_TRICK=no])
+ CXXFLAGS="$PUSHED_FLAGS"
+ if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no, disabling ccaching of precompiled headers])
+ CCACHE=
+ fi
fi
-
- if test "x$CCACHE" != x; then
- CCACHE_SLOPPINESS=time_macros
- CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
- CCACHE_FLAGS=-fpch-preprocess
+ fi
- if test "x$SET_CCACHE_DIR" != x; then
- mkdir -p $CCACHE_DIR > /dev/null 2>&1
- chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1
- fi
+ if test "x$CCACHE" != x; then
+ CCACHE_SLOPPINESS=time_macros
+ CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
+ CCACHE_FLAGS=-fpch-preprocess
+
+ if test "x$SET_CCACHE_DIR" != x; then
+ mkdir -p $CCACHE_DIR > /dev/null 2>&1
+ chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1
fi
+ fi
])
AC_DEFUN_ONCE([BPERF_SETUP_PRECOMPILED_HEADERS],
[
-
-###############################################################################
-#
-# Can the C/C++ compiler use precompiled headers?
-#
-AC_ARG_ENABLE([precompiled-headers], [AS_HELP_STRING([--disable-precompiled-headers],
- [disable using precompiled headers when compiling C++ @<:@enabled@:>@])],
- [ENABLE_PRECOMPH=${enable_precompiled_headers}], [ENABLE_PRECOMPH=yes])
-USE_PRECOMPILED_HEADER=1
-if test "x$ENABLE_PRECOMPH" = xno; then
+ ###############################################################################
+ #
+ # Can the C/C++ compiler use precompiled headers?
+ #
+ AC_ARG_ENABLE([precompiled-headers], [AS_HELP_STRING([--disable-precompiled-headers],
+ [disable using precompiled headers when compiling C++ @<:@enabled@:>@])],
+ [ENABLE_PRECOMPH=${enable_precompiled_headers}], [ENABLE_PRECOMPH=yes])
+
+ USE_PRECOMPILED_HEADER=1
+ if test "x$ENABLE_PRECOMPH" = xno; then
USE_PRECOMPILED_HEADER=0
-fi
+ fi
-if test "x$ENABLE_PRECOMPH" = xyes; then
+ if test "x$ENABLE_PRECOMPH" = xyes; then
# Check that the compiler actually supports precomp headers.
if test "x$GCC" = xyes; then
- AC_MSG_CHECKING([that precompiled headers work])
- echo "int alfa();" > conftest.h
- $CXX -x c++-header conftest.h -o conftest.hpp.gch 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD
- if test ! -f conftest.hpp.gch; then
- USE_PRECOMPILED_HEADER=0
- AC_MSG_RESULT([no])
- else
- AC_MSG_RESULT([yes])
- fi
- rm -f conftest.h conftest.hpp.gch
+ AC_MSG_CHECKING([that precompiled headers work])
+ echo "int alfa();" > conftest.h
+ $CXX -x c++-header conftest.h -o conftest.hpp.gch 2>&AS_MESSAGE_LOG_FD >&AS_MESSAGE_LOG_FD
+ if test ! -f conftest.hpp.gch; then
+ USE_PRECOMPILED_HEADER=0
+ AC_MSG_RESULT([no])
+ else
+ AC_MSG_RESULT([yes])
+ fi
+ rm -f conftest.h conftest.hpp.gch
fi
-fi
+ fi
-AC_SUBST(USE_PRECOMPILED_HEADER)
+ AC_SUBST(USE_PRECOMPILED_HEADER)
])
AC_DEFUN_ONCE([BPERF_SETUP_SMART_JAVAC],
[
-AC_ARG_WITH(sjavac-server-java, [AS_HELP_STRING([--with-sjavac-server-java],
- [use this java binary for running the sjavac background server @<:@Boot JDK java@:>@])])
+ AC_ARG_WITH(sjavac-server-java, [AS_HELP_STRING([--with-sjavac-server-java],
+ [use this java binary for running the sjavac background server @<:@Boot JDK java@:>@])])
-if test "x$with_sjavac_server_java" != x; then
+ if test "x$with_sjavac_server_java" != x; then
SJAVAC_SERVER_JAVA="$with_sjavac_server_java"
FOUND_VERSION=`$SJAVAC_SERVER_JAVA -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" = x; then
- AC_MSG_ERROR([Could not execute server java: $SJAVAC_SERVER_JAVA])
+ AC_MSG_ERROR([Could not execute server java: $SJAVAC_SERVER_JAVA])
fi
-else
+ else
SJAVAC_SERVER_JAVA=""
# Hotspot specific options.
ADD_JVM_ARG_IF_OK([-verbosegc],SJAVAC_SERVER_JAVA,[$JAVA])
# JRockit specific options.
ADD_JVM_ARG_IF_OK([-Xverbose:gc],SJAVAC_SERVER_JAVA,[$JAVA])
SJAVAC_SERVER_JAVA="$JAVA $SJAVAC_SERVER_JAVA"
-fi
-AC_SUBST(SJAVAC_SERVER_JAVA)
+ fi
+ AC_SUBST(SJAVAC_SERVER_JAVA)
-if test "$MEMORY_SIZE" -gt "2500"; then
+ if test "$MEMORY_SIZE" -gt "2500"; then
ADD_JVM_ARG_IF_OK([-d64],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
if test "$JVM_ARG_OK" = true; then
- JVM_64BIT=true
- JVM_ARG_OK=false
- fi
+ JVM_64BIT=true
+ JVM_ARG_OK=false
fi
+ fi
-if test "$JVM_64BIT" = true; then
+ if test "$JVM_64BIT" = true; then
if test "$MEMORY_SIZE" -gt "17000"; then
- ADD_JVM_ARG_IF_OK([-Xms10G -Xmx10G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms10G -Xmx10G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
fi
if test "$MEMORY_SIZE" -gt "10000" && test "$JVM_ARG_OK" = false; then
- ADD_JVM_ARG_IF_OK([-Xms6G -Xmx6G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms6G -Xmx6G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
fi
if test "$MEMORY_SIZE" -gt "5000" && test "$JVM_ARG_OK" = false; then
- ADD_JVM_ARG_IF_OK([-Xms1G -Xmx3G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms1G -Xmx3G],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
fi
if test "$MEMORY_SIZE" -gt "3800" && test "$JVM_ARG_OK" = false; then
- ADD_JVM_ARG_IF_OK([-Xms1G -Xmx2500M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
+ ADD_JVM_ARG_IF_OK([-Xms1G -Xmx2500M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
fi
-fi
-if test "$MEMORY_SIZE" -gt "2500" && test "$JVM_ARG_OK" = false; then
+ fi
+ if test "$MEMORY_SIZE" -gt "2500" && test "$JVM_ARG_OK" = false; then
ADD_JVM_ARG_IF_OK([-Xms1000M -Xmx1500M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
-fi
-if test "$MEMORY_SIZE" -gt "1000" && test "$JVM_ARG_OK" = false; then
+ fi
+ if test "$MEMORY_SIZE" -gt "1000" && test "$JVM_ARG_OK" = false; then
ADD_JVM_ARG_IF_OK([-Xms400M -Xmx1100M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
-fi
-if test "$JVM_ARG_OK" = false; then
+ fi
+ if test "$JVM_ARG_OK" = false; then
ADD_JVM_ARG_IF_OK([-Xms256M -Xmx512M],SJAVAC_SERVER_JAVA,[$SJAVAC_SERVER_JAVA])
-fi
+ fi
-AC_MSG_CHECKING([whether to use sjavac])
-AC_ARG_ENABLE([sjavac], [AS_HELP_STRING([--enable-sjavac],
- [use sjavac to do fast incremental compiles @<:@disabled@:>@])],
- [ENABLE_SJAVAC="${enableval}"], [ENABLE_SJAVAC='no'])
-AC_MSG_RESULT([$ENABLE_SJAVAC])
-AC_SUBST(ENABLE_SJAVAC)
+ AC_MSG_CHECKING([whether to use sjavac])
+ AC_ARG_ENABLE([sjavac], [AS_HELP_STRING([--enable-sjavac],
+ [use sjavac to do fast incremental compiles @<:@disabled@:>@])],
+ [ENABLE_SJAVAC="${enableval}"], [ENABLE_SJAVAC='no'])
+ AC_MSG_RESULT([$ENABLE_SJAVAC])
+ AC_SUBST(ENABLE_SJAVAC)
-if test "x$ENABLE_SJAVAC" = xyes; then
+ if test "x$ENABLE_SJAVAC" = xyes; then
SJAVAC_SERVER_DIR="$OUTPUT_ROOT/javacservers"
-else
+ else
SJAVAC_SERVER_DIR=
-fi
-AC_SUBST(SJAVAC_SERVER_DIR)
-
+ fi
+ AC_SUBST(SJAVAC_SERVER_DIR)
])
--- a/common/autoconf/builddeps.conf.example Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/builddeps.conf.example Thu Oct 10 14:58:19 2013 +0200
@@ -34,7 +34,7 @@
# If no rewrite was found, then rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
REWRITE_i686_pc_linux_gnu=i686-unknown-linux-gnu
REWRITE_i386_pc_solaris2_10=i686-sun-solaris2_10
-
+
# The needed cups builddeps are platform independent header files.
# I.e. they need not be part of the devkit.
builddep_cups=lib/cups_1_3_9.zip
--- a/common/autoconf/builddeps.conf.nfs.example Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/builddeps.conf.nfs.example Thu Oct 10 14:58:19 2013 +0200
@@ -29,7 +29,7 @@
REWRITE_i686_pc_linux_gnu=i686-unknown-linux-gnu
REWRITE_i386_pc_solaris2_10=i686-sun-solaris2_10
-
+
DEVTOOLS=/java/devtools
builddep_cups=${DEVTOOLS}/linux/cups/include
--- a/common/autoconf/builddeps.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/builddeps.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,223 +25,223 @@
AC_DEFUN_ONCE([BDEPS_SCAN_FOR_BUILDDEPS],
[
- define(LIST_OF_BUILD_DEPENDENCIES,)
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- if test "x$with_builddeps_conf" != x; then
- AC_MSG_CHECKING([for supplied builddeps configuration file])
- builddepsfile=$with_builddeps_conf
- if test -s $builddepsfile; then
- . $builddepsfile
- AC_MSG_RESULT([loaded!])
- else
- AC_MSG_ERROR([The given builddeps conf file $with_builddeps_conf could not be loaded!])
- fi
- else
- AC_MSG_CHECKING([for builddeps.conf files in sources...])
- builddepsfile=`mktemp`
- touch $builddepsfile
- # Put all found confs into a single file.
- find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
- # Source the file to acquire the variables
- if test -s $builddepsfile; then
- . $builddepsfile
- AC_MSG_RESULT([found at least one!])
- else
- AC_MSG_ERROR([Could not find any builddeps.conf at all!])
- fi
- fi
- # Create build and target names that use _ instead of "-" and ".".
- # This is necessary to use them in variable names.
- build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
- target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
- # Extract rewrite information for build and target
- eval rewritten_build=\${REWRITE_${build_var}}
- if test "x$rewritten_build" = x; then
- rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
- echo Build stays the same $rewritten_build
- else
- echo Rewriting build for builddeps into $rewritten_build
- fi
- eval rewritten_target=\${REWRITE_${target_var}}
- if test "x$rewritten_target" = x; then
- rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
- echo Target stays the same $rewritten_target
- else
- echo Rewriting target for builddeps into $rewritten_target
- fi
- rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
- rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
+ define(LIST_OF_BUILD_DEPENDENCIES,)
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ if test "x$with_builddeps_conf" != x; then
+ AC_MSG_CHECKING([for supplied builddeps configuration file])
+ builddepsfile=$with_builddeps_conf
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ AC_MSG_RESULT([loaded!])
+ else
+ AC_MSG_ERROR([The given builddeps conf file $with_builddeps_conf could not be loaded!])
+ fi
+ else
+ AC_MSG_CHECKING([for builddeps.conf files in sources...])
+ builddepsfile=`mktemp`
+ touch $builddepsfile
+ # Put all found confs into a single file.
+ find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
+ # Source the file to acquire the variables
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ AC_MSG_RESULT([found at least one!])
+ else
+ AC_MSG_ERROR([Could not find any builddeps.conf at all!])
+ fi
fi
- AC_CHECK_PROGS(BDEPS_UNZIP, [7z unzip])
- if test "x$BDEPS_UNZIP" = x7z; then
- BDEPS_UNZIP="7z x"
+ # Create build and target names that use _ instead of "-" and ".".
+ # This is necessary to use them in variable names.
+ build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ # Extract rewrite information for build and target
+ eval rewritten_build=\${REWRITE_${build_var}}
+ if test "x$rewritten_build" = x; then
+ rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
+ echo Build stays the same $rewritten_build
+ else
+ echo Rewriting build for builddeps into $rewritten_build
fi
+ eval rewritten_target=\${REWRITE_${target_var}}
+ if test "x$rewritten_target" = x; then
+ rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
+ echo Target stays the same $rewritten_target
+ else
+ echo Rewriting target for builddeps into $rewritten_target
+ fi
+ rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
+ rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
+ fi
+ AC_CHECK_PROGS(BDEPS_UNZIP, [7z unzip])
+ if test "x$BDEPS_UNZIP" = x7z; then
+ BDEPS_UNZIP="7z x"
+ fi
- AC_CHECK_PROGS(BDEPS_FTP, [wget lftp ftp])
+ AC_CHECK_PROGS(BDEPS_FTP, [wget lftp ftp])
])
AC_DEFUN([BDEPS_FTPGET],
[
- # $1 is the ftp://abuilddeps.server.com/libs/cups.zip
- # $2 is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $2 $1
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $1 -o $2"
+ # $1 is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $2 is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $2 $1
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $1 -o $2"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $1 | cut -f 3 -d '/'`
+ FTPPATH=`echo $1 | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $1 | cut -f 3 -d '/'`
- FTPPATH=`echo $1 | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $2" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- AC_MSG_ERROR([I do not know how to use the tool: $BDEPS_FTP])
- fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $2" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ AC_MSG_ERROR([I do not know how to use the tool: $BDEPS_FTP])
+ fi
])
AC_DEFUN([BDEPS_CHECK_MODULE],
[
- define([LIST_OF_BUILD_DEPENDENCIES],LIST_OF_BUILD_DEPENDENCIES[$2=$3'\n'])
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_$2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_$2_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_$2_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The $2 comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_$2}
- fi
- if test "x$resource" != x; then
- AC_MSG_NOTICE([Using builddeps $resource for $2])
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
- BDEPS_FETCH($2, $resource, $with_builddeps_server, $with_builddeps_dir, depdir)
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_$2_ROOT}
- thecflags=${builddep_$2_CFLAGS}
- thelibs=${builddep_$2_LIBS}
- if test "x$depdir" = x; then
- AC_MSG_ERROR([Could not download build dependency $2])
- fi
- $1=$depdir
- if test "x$theroot" != x; then
- $1="$theroot"
- fi
- if test "x$thecflags" != x; then
- $1_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- $1_LIBS="$thelibs"
- fi
- m4_default([$4], [:])
- m4_ifvaln([$5], [else $5])
- fi
- m4_ifvaln([$5], [else $5])
+ define([LIST_OF_BUILD_DEPENDENCIES],LIST_OF_BUILD_DEPENDENCIES[$2=$3'\n'])
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_$2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_$2_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_$2_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The $2 comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_$2}
fi
+ if test "x$resource" != x; then
+ AC_MSG_NOTICE([Using builddeps $resource for $2])
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+ BDEPS_FETCH($2, $resource, $with_builddeps_server, $with_builddeps_dir, depdir)
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_$2_ROOT}
+ thecflags=${builddep_$2_CFLAGS}
+ thelibs=${builddep_$2_LIBS}
+ if test "x$depdir" = x; then
+ AC_MSG_ERROR([Could not download build dependency $2])
+ fi
+ $1=$depdir
+ if test "x$theroot" != x; then
+ $1="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ $1_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ $1_LIBS="$thelibs"
+ fi
+ m4_default([$4], [:])
+ m4_ifvaln([$5], [else $5])
+ fi
+ m4_ifvaln([$5], [else $5])
+ fi
])
AC_DEFUN([BDEPS_FETCH],
[
-# $1 is for example mymodule
-# $2 is for example libs/general/libmymod_1_2_3.zip
-# $3 is for example ftp://mybuilddeps.myserver.com/builddeps
-# $4 is for example /localhome/builddeps
-# $5 is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $2`
- filebase=`echo $filename | sed 's/\.[[^\.]]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$4/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- AC_MSG_NOTICE([Downloading build dependency $1 from $3/$2 and installing into $installdir])
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- AC_MSG_ERROR([Could not create directory $installdir])
- fi
- tmpfile=`mktemp $installdir/$1.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- AC_MSG_ERROR([Could not create files in directory $installdir])
- fi
- BDEPS_FTPGET([$3/$2] , [$tmpfile])
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- AC_MSG_ERROR([Could not download $3/$2])
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) AC_MSG_ERROR([Cannot handle build depency archive with extension $extension])
- ;;
- esac
+ # $1 is for example mymodule
+ # $2 is for example libs/general/libmymod_1_2_3.zip
+ # $3 is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $4 is for example /localhome/builddeps
+ # $5 is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $2`
+ filebase=`echo $filename | sed 's/\.[[^\.]]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$4/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ AC_MSG_NOTICE([Downloading build dependency $1 from $3/$2 and installing into $installdir])
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ AC_MSG_ERROR([Could not create directory $installdir])
fi
- if test -f $installdir/$filename.unpacked; then
- $5=$installdir
+ tmpfile=`mktemp $installdir/$1.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ AC_MSG_ERROR([Could not create files in directory $installdir])
+ fi
+ BDEPS_FTPGET([$3/$2] , [$tmpfile])
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ AC_MSG_ERROR([Could not download $3/$2])
fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) AC_MSG_ERROR([Cannot handle build depency archive with extension $extension])
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ $5=$installdir
+ fi
])
AC_DEFUN_ONCE([BDEPS_CONFIGURE_BUILDDEPS],
[
-AC_ARG_WITH(builddeps-conf, [AS_HELP_STRING([--with-builddeps-conf],
- [use this configuration file for the builddeps])])
+ AC_ARG_WITH(builddeps-conf, [AS_HELP_STRING([--with-builddeps-conf],
+ [use this configuration file for the builddeps])])
-AC_ARG_WITH(builddeps-server, [AS_HELP_STRING([--with-builddeps-server],
- [download and use build dependencies from this server url])])
+ AC_ARG_WITH(builddeps-server, [AS_HELP_STRING([--with-builddeps-server],
+ [download and use build dependencies from this server url])])
-AC_ARG_WITH(builddeps-dir, [AS_HELP_STRING([--with-builddeps-dir],
- [store downloaded build dependencies here @<:@/localhome/builddeps@:>@])],
- [],
- [with_builddeps_dir=/localhome/builddeps])
+ AC_ARG_WITH(builddeps-dir, [AS_HELP_STRING([--with-builddeps-dir],
+ [store downloaded build dependencies here @<:@/localhome/builddeps@:>@])],
+ [],
+ [with_builddeps_dir=/localhome/builddeps])
-AC_ARG_WITH(builddeps-group, [AS_HELP_STRING([--with-builddeps-group],
- [chgrp the downloaded build dependencies to this group])])
+ AC_ARG_WITH(builddeps-group, [AS_HELP_STRING([--with-builddeps-group],
+ [chgrp the downloaded build dependencies to this group])])
])
--- a/common/autoconf/compare.sh.in Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/compare.sh.in Thu Oct 10 14:58:19 2013 +0200
@@ -22,7 +22,7 @@
# questions.
#
-# This script is processed by configure before it's usable. It is run from
+# This script is processed by configure before it's usable. It is run from
# the root of the build directory.
@@ -67,14 +67,14 @@
SRC_ROOT="@SRC_ROOT@"
if [ "$OPENJDK_TARGET_OS" = "windows" ]; then
- PATH="@VS_PATH@"
+ PATH="@VS_PATH@"
fi
# Now locate the main script and run it.
REAL_COMPARE_SCRIPT="$SRC_ROOT/common/bin/compare.sh"
if [ ! -e "$REAL_COMPARE_SCRIPT" ]; then
- echo "Error: Cannot locate compare script, it should have been in $REAL_COMPARE_SCRIPT"
- exit 1
+ echo "Error: Cannot locate compare script, it should have been in $REAL_COMPARE_SCRIPT"
+ exit 1
fi
. "$REAL_COMPARE_SCRIPT" "$@"
--- a/common/autoconf/config.h.in Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/config.h.in Thu Oct 10 14:58:19 2013 +0200
@@ -46,4 +46,4 @@
#define HAVE_LIBGIF
#define HAVE_LIBZ
#define HAVE_LIBM
-#define HAVE_ALTZONE
+#define HAVE_ALTZONE
--- a/common/autoconf/configure Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/configure Thu Oct 10 14:58:19 2013 +0200
@@ -88,7 +88,6 @@
check_autoconf_timestamps
fi
fi
-
fi
}
@@ -106,7 +105,7 @@
fi
fi
-# Autoconf calls the configure script recursively sometimes.
+# Autoconf calls the configure script recursively sometimes.
# Don't start logging twice in that case
if test "x$conf_debug_configure" = xtrue; then
conf_debug_configure=recursive
@@ -120,28 +119,28 @@
for conf_option
do
case $conf_option in
- --openjdk-target=*)
- conf_openjdk_target=`expr "X$conf_option" : '[^=]*=\(.*\)'`
- continue ;;
- --debug-configure)
- if test "x$conf_debug_configure" != xrecursive; then
- conf_debug_configure=true
- export conf_debug_configure
- fi
- continue ;;
- *)
- conf_processed_arguments=("${conf_processed_arguments[@]}" "$conf_option") ;;
+ --openjdk-target=*)
+ conf_openjdk_target=`expr "X$conf_option" : '[^=]*=\(.*\)'`
+ continue ;;
+ --debug-configure)
+ if test "x$conf_debug_configure" != xrecursive; then
+ conf_debug_configure=true
+ export conf_debug_configure
+ fi
+ continue ;;
+ *)
+ conf_processed_arguments=("${conf_processed_arguments[@]}" "$conf_option") ;;
esac
case $conf_option in
- -build | --build | --buil | --bui | --bu |-build=* | --build=* | --buil=* | --bui=* | --bu=*)
- conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
- -target | --target | --targe | --targ | --tar | --ta | --t | -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
- -host | --host | --hos | --ho | -host=* | --host=* | --hos=* | --ho=*)
- conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
- -help | --help | --hel | --he | -h)
- conf_print_help=true ;;
+ -build | --build | --buil | --bui | --bu |-build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
+ -target | --target | --targe | --targ | --tar | --ta | --t | -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
+ -host | --host | --hos | --ho | -host=* | --host=* | --hos=* | --ho=*)
+ conf_legacy_crosscompile="$conf_legacy_crosscompile $conf_option" ;;
+ -help | --help | --hel | --he | -h)
+ conf_print_help=true ;;
esac
done
@@ -179,7 +178,7 @@
else
echo Running generated-configure.sh
conf_script_to_run=$conf_script_dir/generated-configure.sh
-fi
+fi
if test "x$conf_debug_configure" != x; then
# Turn on shell debug output if requested (initial or recursive)
--- a/common/autoconf/configure.ac Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/configure.ac Thu Oct 10 14:58:19 2013 +0200
@@ -236,7 +236,7 @@
# Create the actual output files. Now the main work of configure is done.
AC_OUTPUT
-# Try to move the config.log file to the output directory.
+# Try to move the config.log file to the output directory.
if test -e ./config.log; then
$MV -f ./config.log "$OUTPUT_ROOT/config.log" 2> /dev/null
fi
--- a/common/autoconf/generated-configure.sh Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/generated-configure.sh Thu Oct 10 14:58:19 2013 +0200
@@ -3112,7 +3112,7 @@
#
# Test if $1 is a valid argument to $3 (often is $JAVA passed as $3)
-# If so, then append $1 to $2\
+# If so, then append $1 to $2 \
# Also set JVM_ARG_OK to true/false depending on outcome.
@@ -3441,74 +3441,74 @@
cygwin_help() {
- case $1 in
+ case $1 in
unzip)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P unzip" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P unzip" ;;
zip)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P zip" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P zip" ;;
make)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P make" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P make" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
apt_help() {
- case $1 in
+ case $1 in
devkit)
- PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;;
openjdk)
- PKGHANDLER_COMMAND="sudo apt-get install openjdk-7-jdk" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install openjdk-7-jdk" ;;
alsa)
- PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;;
cups)
- PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;;
freetype2)
- PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;;
pulse)
- PKGHANDLER_COMMAND="sudo apt-get install libpulse-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libpulse-dev" ;;
x11)
- PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
ccache)
- PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
yum_help() {
- case $1 in
+ case $1 in
devkit)
- PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;;
+ PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;;
openjdk)
- PKGHANDLER_COMMAND="sudo yum install java-1.7.0-openjdk" ;;
+ PKGHANDLER_COMMAND="sudo yum install java-1.7.0-openjdk" ;;
alsa)
- PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;;
cups)
- PKGHANDLER_COMMAND="sudo yum install cups-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install cups-devel" ;;
freetype2)
- PKGHANDLER_COMMAND="sudo yum install freetype-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install freetype-devel" ;;
pulse)
- PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
x11)
- PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
ccache)
- PKGHANDLER_COMMAND="sudo yum install ccache" ;;
+ PKGHANDLER_COMMAND="sudo yum install ccache" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
port_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
pkgutil_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
pkgadd_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
@@ -3662,8 +3662,8 @@
# doing anything else with these values.
- # Setup the legacy variables, for controlling the old makefiles.
- #
+# Setup the legacy variables, for controlling the old makefiles.
+#
@@ -3818,7 +3818,7 @@
#CUSTOM_AUTOCONF_INCLUDE
# Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1381335331
+DATE_WHEN_GENERATED=1381407169
###############################################################################
#
@@ -3831,26 +3831,26 @@
# Basic initialization that must happen first of all
-# Save the original command line. This is passed to us by the wrapper configure script.
-
-DATE_WHEN_CONFIGURED=`LANG=C date`
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: Configuration created at $DATE_WHEN_CONFIGURED." >&5
+ # Save the original command line. This is passed to us by the wrapper configure script.
+
+ DATE_WHEN_CONFIGURED=`LANG=C date`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Configuration created at $DATE_WHEN_CONFIGURED." >&5
$as_echo "$as_me: Configuration created at $DATE_WHEN_CONFIGURED." >&6;}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: configure script generated at timestamp $DATE_WHEN_GENERATED." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: configure script generated at timestamp $DATE_WHEN_GENERATED." >&5
$as_echo "$as_me: configure script generated at timestamp $DATE_WHEN_GENERATED." >&6;}
-# Start with tools that do not need have cross compilation support
-# and can be expected to be found in the default PATH. These tools are
-# used by configure. Nor are these tools expected to be found in the
-# devkit from the builddeps server either, since they are
-# needed to download the devkit.
-
-# First are all the simple required tools.
-
- for ac_prog in basename
+ # Start with tools that do not need have cross compilation support
+ # and can be expected to be found in the default PATH. These tools are
+ # used by configure. Nor are these tools expected to be found in the
+ # devkit from the builddeps server either, since they are
+ # needed to download the devkit.
+
+ # First are all the simple required tools.
+
+ for ac_prog in basename
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -3896,20 +3896,20 @@
done
- if test "x$BASENAME" = x; then
- if test "xbasename" = x; then
- PROG_NAME=basename
- else
- PROG_NAME=basename
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in bash
+ if test "x$BASENAME" = x; then
+ if test "xbasename" = x; then
+ PROG_NAME=basename
+ else
+ PROG_NAME=basename
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in bash
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -3955,20 +3955,20 @@
done
- if test "x$BASH" = x; then
- if test "xbash" = x; then
- PROG_NAME=bash
- else
- PROG_NAME=bash
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in cat
+ if test "x$BASH" = x; then
+ if test "xbash" = x; then
+ PROG_NAME=bash
+ else
+ PROG_NAME=bash
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cat
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4014,20 +4014,20 @@
done
- if test "x$CAT" = x; then
- if test "xcat" = x; then
- PROG_NAME=cat
- else
- PROG_NAME=cat
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in chmod
+ if test "x$CAT" = x; then
+ if test "xcat" = x; then
+ PROG_NAME=cat
+ else
+ PROG_NAME=cat
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in chmod
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4073,20 +4073,20 @@
done
- if test "x$CHMOD" = x; then
- if test "xchmod" = x; then
- PROG_NAME=chmod
- else
- PROG_NAME=chmod
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in cmp
+ if test "x$CHMOD" = x; then
+ if test "xchmod" = x; then
+ PROG_NAME=chmod
+ else
+ PROG_NAME=chmod
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cmp
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4132,20 +4132,20 @@
done
- if test "x$CMP" = x; then
- if test "xcmp" = x; then
- PROG_NAME=cmp
- else
- PROG_NAME=cmp
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in comm
+ if test "x$CMP" = x; then
+ if test "xcmp" = x; then
+ PROG_NAME=cmp
+ else
+ PROG_NAME=cmp
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in comm
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4191,20 +4191,20 @@
done
- if test "x$COMM" = x; then
- if test "xcomm" = x; then
- PROG_NAME=comm
- else
- PROG_NAME=comm
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in cp
+ if test "x$COMM" = x; then
+ if test "xcomm" = x; then
+ PROG_NAME=comm
+ else
+ PROG_NAME=comm
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cp
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4250,20 +4250,20 @@
done
- if test "x$CP" = x; then
- if test "xcp" = x; then
- PROG_NAME=cp
- else
- PROG_NAME=cp
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in cpio
+ if test "x$CP" = x; then
+ if test "xcp" = x; then
+ PROG_NAME=cp
+ else
+ PROG_NAME=cp
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cpio
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4309,20 +4309,20 @@
done
- if test "x$CPIO" = x; then
- if test "xcpio" = x; then
- PROG_NAME=cpio
- else
- PROG_NAME=cpio
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in cut
+ if test "x$CPIO" = x; then
+ if test "xcpio" = x; then
+ PROG_NAME=cpio
+ else
+ PROG_NAME=cpio
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in cut
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4368,20 +4368,20 @@
done
- if test "x$CUT" = x; then
- if test "xcut" = x; then
- PROG_NAME=cut
- else
- PROG_NAME=cut
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in date
+ if test "x$CUT" = x; then
+ if test "xcut" = x; then
+ PROG_NAME=cut
+ else
+ PROG_NAME=cut
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in date
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4427,20 +4427,20 @@
done
- if test "x$DATE" = x; then
- if test "xdate" = x; then
- PROG_NAME=date
- else
- PROG_NAME=date
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in gdiff diff
+ if test "x$DATE" = x; then
+ if test "xdate" = x; then
+ PROG_NAME=date
+ else
+ PROG_NAME=date
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in gdiff diff
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4486,20 +4486,20 @@
done
- if test "x$DIFF" = x; then
- if test "xgdiff diff" = x; then
- PROG_NAME=diff
- else
- PROG_NAME=gdiff diff
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in dirname
+ if test "x$DIFF" = x; then
+ if test "xgdiff diff" = x; then
+ PROG_NAME=diff
+ else
+ PROG_NAME=gdiff diff
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in dirname
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4545,20 +4545,20 @@
done
- if test "x$DIRNAME" = x; then
- if test "xdirname" = x; then
- PROG_NAME=dirname
- else
- PROG_NAME=dirname
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in echo
+ if test "x$DIRNAME" = x; then
+ if test "xdirname" = x; then
+ PROG_NAME=dirname
+ else
+ PROG_NAME=dirname
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in echo
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4604,20 +4604,20 @@
done
- if test "x$ECHO" = x; then
- if test "xecho" = x; then
- PROG_NAME=echo
- else
- PROG_NAME=echo
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in expr
+ if test "x$ECHO" = x; then
+ if test "xecho" = x; then
+ PROG_NAME=echo
+ else
+ PROG_NAME=echo
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in expr
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4663,20 +4663,20 @@
done
- if test "x$EXPR" = x; then
- if test "xexpr" = x; then
- PROG_NAME=expr
- else
- PROG_NAME=expr
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in file
+ if test "x$EXPR" = x; then
+ if test "xexpr" = x; then
+ PROG_NAME=expr
+ else
+ PROG_NAME=expr
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in file
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4722,20 +4722,20 @@
done
- if test "x$FILE" = x; then
- if test "xfile" = x; then
- PROG_NAME=file
- else
- PROG_NAME=file
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in find
+ if test "x$FILE" = x; then
+ if test "xfile" = x; then
+ PROG_NAME=file
+ else
+ PROG_NAME=file
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in find
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4781,20 +4781,20 @@
done
- if test "x$FIND" = x; then
- if test "xfind" = x; then
- PROG_NAME=find
- else
- PROG_NAME=find
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in head
+ if test "x$FIND" = x; then
+ if test "xfind" = x; then
+ PROG_NAME=find
+ else
+ PROG_NAME=find
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in head
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4840,20 +4840,20 @@
done
- if test "x$HEAD" = x; then
- if test "xhead" = x; then
- PROG_NAME=head
- else
- PROG_NAME=head
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in ln
+ if test "x$HEAD" = x; then
+ if test "xhead" = x; then
+ PROG_NAME=head
+ else
+ PROG_NAME=head
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in ln
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4899,20 +4899,20 @@
done
- if test "x$LN" = x; then
- if test "xln" = x; then
- PROG_NAME=ln
- else
- PROG_NAME=ln
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in ls
+ if test "x$LN" = x; then
+ if test "xln" = x; then
+ PROG_NAME=ln
+ else
+ PROG_NAME=ln
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in ls
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -4958,20 +4958,20 @@
done
- if test "x$LS" = x; then
- if test "xls" = x; then
- PROG_NAME=ls
- else
- PROG_NAME=ls
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in mkdir
+ if test "x$LS" = x; then
+ if test "xls" = x; then
+ PROG_NAME=ls
+ else
+ PROG_NAME=ls
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in mkdir
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5017,20 +5017,20 @@
done
- if test "x$MKDIR" = x; then
- if test "xmkdir" = x; then
- PROG_NAME=mkdir
- else
- PROG_NAME=mkdir
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in mktemp
+ if test "x$MKDIR" = x; then
+ if test "xmkdir" = x; then
+ PROG_NAME=mkdir
+ else
+ PROG_NAME=mkdir
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in mktemp
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5076,20 +5076,20 @@
done
- if test "x$MKTEMP" = x; then
- if test "xmktemp" = x; then
- PROG_NAME=mktemp
- else
- PROG_NAME=mktemp
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in mv
+ if test "x$MKTEMP" = x; then
+ if test "xmktemp" = x; then
+ PROG_NAME=mktemp
+ else
+ PROG_NAME=mktemp
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in mv
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5135,20 +5135,20 @@
done
- if test "x$MV" = x; then
- if test "xmv" = x; then
- PROG_NAME=mv
- else
- PROG_NAME=mv
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in printf
+ if test "x$MV" = x; then
+ if test "xmv" = x; then
+ PROG_NAME=mv
+ else
+ PROG_NAME=mv
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in printf
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5194,20 +5194,20 @@
done
- if test "x$PRINTF" = x; then
- if test "xprintf" = x; then
- PROG_NAME=printf
- else
- PROG_NAME=printf
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in rm
+ if test "x$PRINTF" = x; then
+ if test "xprintf" = x; then
+ PROG_NAME=printf
+ else
+ PROG_NAME=printf
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in rm
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5253,20 +5253,20 @@
done
- if test "x$RM" = x; then
- if test "xrm" = x; then
- PROG_NAME=rm
- else
- PROG_NAME=rm
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in sh
+ if test "x$RM" = x; then
+ if test "xrm" = x; then
+ PROG_NAME=rm
+ else
+ PROG_NAME=rm
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in sh
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5312,20 +5312,20 @@
done
- if test "x$SH" = x; then
- if test "xsh" = x; then
- PROG_NAME=sh
- else
- PROG_NAME=sh
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in sort
+ if test "x$SH" = x; then
+ if test "xsh" = x; then
+ PROG_NAME=sh
+ else
+ PROG_NAME=sh
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in sort
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5371,20 +5371,20 @@
done
- if test "x$SORT" = x; then
- if test "xsort" = x; then
- PROG_NAME=sort
- else
- PROG_NAME=sort
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in tail
+ if test "x$SORT" = x; then
+ if test "xsort" = x; then
+ PROG_NAME=sort
+ else
+ PROG_NAME=sort
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tail
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5430,20 +5430,20 @@
done
- if test "x$TAIL" = x; then
- if test "xtail" = x; then
- PROG_NAME=tail
- else
- PROG_NAME=tail
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in tar
+ if test "x$TAIL" = x; then
+ if test "xtail" = x; then
+ PROG_NAME=tail
+ else
+ PROG_NAME=tail
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tar
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5489,20 +5489,20 @@
done
- if test "x$TAR" = x; then
- if test "xtar" = x; then
- PROG_NAME=tar
- else
- PROG_NAME=tar
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in tee
+ if test "x$TAR" = x; then
+ if test "xtar" = x; then
+ PROG_NAME=tar
+ else
+ PROG_NAME=tar
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tee
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5548,20 +5548,20 @@
done
- if test "x$TEE" = x; then
- if test "xtee" = x; then
- PROG_NAME=tee
- else
- PROG_NAME=tee
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in touch
+ if test "x$TEE" = x; then
+ if test "xtee" = x; then
+ PROG_NAME=tee
+ else
+ PROG_NAME=tee
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in touch
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5607,20 +5607,20 @@
done
- if test "x$TOUCH" = x; then
- if test "xtouch" = x; then
- PROG_NAME=touch
- else
- PROG_NAME=touch
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in tr
+ if test "x$TOUCH" = x; then
+ if test "xtouch" = x; then
+ PROG_NAME=touch
+ else
+ PROG_NAME=touch
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in tr
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5666,20 +5666,20 @@
done
- if test "x$TR" = x; then
- if test "xtr" = x; then
- PROG_NAME=tr
- else
- PROG_NAME=tr
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in uname
+ if test "x$TR" = x; then
+ if test "xtr" = x; then
+ PROG_NAME=tr
+ else
+ PROG_NAME=tr
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in uname
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5725,20 +5725,20 @@
done
- if test "x$UNAME" = x; then
- if test "xuname" = x; then
- PROG_NAME=uname
- else
- PROG_NAME=uname
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in uniq
+ if test "x$UNAME" = x; then
+ if test "xuname" = x; then
+ PROG_NAME=uname
+ else
+ PROG_NAME=uname
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in uniq
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5784,20 +5784,20 @@
done
- if test "x$UNIQ" = x; then
- if test "xuniq" = x; then
- PROG_NAME=uniq
- else
- PROG_NAME=uniq
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in wc
+ if test "x$UNIQ" = x; then
+ if test "xuniq" = x; then
+ PROG_NAME=uniq
+ else
+ PROG_NAME=uniq
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in wc
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5843,20 +5843,20 @@
done
- if test "x$WC" = x; then
- if test "xwc" = x; then
- PROG_NAME=wc
- else
- PROG_NAME=wc
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in which
+ if test "x$WC" = x; then
+ if test "xwc" = x; then
+ PROG_NAME=wc
+ else
+ PROG_NAME=wc
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in which
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5902,20 +5902,20 @@
done
- if test "x$WHICH" = x; then
- if test "xwhich" = x; then
- PROG_NAME=which
- else
- PROG_NAME=which
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in xargs
+ if test "x$WHICH" = x; then
+ if test "xwhich" = x; then
+ PROG_NAME=which
+ else
+ PROG_NAME=which
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in xargs
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -5961,21 +5961,21 @@
done
- if test "x$XARGS" = x; then
- if test "xxargs" = x; then
- PROG_NAME=xargs
- else
- PROG_NAME=xargs
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
-# Then required tools that require some special treatment.
-for ac_prog in gawk mawk nawk awk
+ if test "x$XARGS" = x; then
+ if test "xxargs" = x; then
+ PROG_NAME=xargs
+ else
+ PROG_NAME=xargs
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ # Then required tools that require some special treatment.
+ for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -6018,18 +6018,18 @@
done
- if test "x$AWK" = x; then
- if test "x" = x; then
- PROG_NAME=awk
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+ if test "x$AWK" = x; then
+ if test "x" = x; then
+ PROG_NAME=awk
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
if ${ac_cv_path_GREP+:} false; then :
$as_echo_n "(cached) " >&6
@@ -6093,18 +6093,18 @@
- if test "x$GREP" = x; then
- if test "x" = x; then
- PROG_NAME=grep
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+ if test "x$GREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=grep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
$as_echo_n "checking for egrep... " >&6; }
if ${ac_cv_path_EGREP+:} false; then :
$as_echo_n "(cached) " >&6
@@ -6172,18 +6172,18 @@
- if test "x$EGREP" = x; then
- if test "x" = x; then
- PROG_NAME=egrep
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+ if test "x$EGREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=egrep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
$as_echo_n "checking for fgrep... " >&6; }
if ${ac_cv_path_FGREP+:} false; then :
$as_echo_n "(cached) " >&6
@@ -6251,18 +6251,18 @@
- if test "x$FGREP" = x; then
- if test "x" = x; then
- PROG_NAME=fgrep
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+ if test "x$FGREP" = x; then
+ if test "x" = x; then
+ PROG_NAME=fgrep
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
$as_echo_n "checking for a sed that does not truncate output... " >&6; }
if ${ac_cv_path_SED+:} false; then :
$as_echo_n "(cached) " >&6
@@ -6332,19 +6332,19 @@
rm -f conftest.sed
- if test "x$SED" = x; then
- if test "x" = x; then
- PROG_NAME=sed
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-for ac_prog in nawk gawk awk
+ if test "x$SED" = x; then
+ if test "x" = x; then
+ PROG_NAME=sed
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+ for ac_prog in nawk gawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -6390,27 +6390,27 @@
done
- if test "x$NAWK" = x; then
- if test "x" = x; then
- PROG_NAME=nawk
- else
- PROG_NAME=
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-# Always force rm.
-RM="$RM -f"
-
-# pwd behaves differently on various platforms and some don't support the -L flag.
-# Always use the bash builtin pwd to get uniform behavior.
-THEPWDCMD=pwd
-
-# These are not required on all platforms
-# Extract the first word of "cygpath", so it can be a program name with args.
+ if test "x$NAWK" = x; then
+ if test "x" = x; then
+ PROG_NAME=nawk
+ else
+ PROG_NAME=
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+ # Always force rm.
+ RM="$RM -f"
+
+ # pwd behaves differently on various platforms and some don't support the -L flag.
+ # Always use the bash builtin pwd to get uniform behavior.
+ THEPWDCMD=pwd
+
+ # These are not required on all platforms
+ # Extract the first word of "cygpath", so it can be a program name with args.
set dummy cygpath; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -6450,7 +6450,7 @@
fi
-# Extract the first word of "readlink", so it can be a program name with args.
+ # Extract the first word of "readlink", so it can be a program name with args.
set dummy readlink; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -6490,7 +6490,7 @@
fi
-# Extract the first word of "df", so it can be a program name with args.
+ # Extract the first word of "df", so it can be a program name with args.
set dummy df; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -6530,7 +6530,7 @@
fi
-# Extract the first word of "SetFile", so it can be a program name with args.
+ # Extract the first word of "SetFile", so it can be a program name with args.
set dummy SetFile; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -6685,26 +6685,26 @@
NONENONEs,x,x, &&
program_prefix=${target_alias}-
-# Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
-# is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
-# product you're building. The target of this build is called "host". Since this is confusing to most people, we
-# have not adopted that system, but use "target" as the platform we are building for. In some places though we need
-# to use the configure naming style.
-
-
-
-
-
- # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
- # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
- # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
- # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
- OPENJDK_TARGET_AUTOCONF_NAME="$host"
- OPENJDK_BUILD_AUTOCONF_NAME="$build"
-
-
-
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ # Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
+ # is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
+ # product you're building. The target of this build is called "host". Since this is confusing to most people, we
+ # have not adopted that system, but use "target" as the platform we are building for. In some places though we need
+ # to use the configure naming style.
+
+
+
+
+
+ # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
+ # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
+ # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
+ # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
+ OPENJDK_TARGET_AUTOCONF_NAME="$host"
+ OPENJDK_BUILD_AUTOCONF_NAME="$build"
+
+
+
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
case "$build_os" in
*linux*)
@@ -6768,63 +6768,63 @@
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
powerpc64)
VAR_CPU=ppc64
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390)
VAR_CPU=s390
VAR_CPU_ARCH=s390
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390x)
VAR_CPU=s390x
VAR_CPU_ARCH=s390
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparc)
VAR_CPU=sparc
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparcv9)
VAR_CPU=sparcv9
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
*)
as_fn_error $? "unsupported cpu $build_cpu" "$LINENO" 5
;;
esac
- # ..and setup our own variables. (Do this explicitely to facilitate searching)
- OPENJDK_BUILD_OS="$VAR_OS"
- OPENJDK_BUILD_OS_API="$VAR_OS_API"
- OPENJDK_BUILD_OS_ENV="$VAR_OS_ENV"
- OPENJDK_BUILD_CPU="$VAR_CPU"
- OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-build os-cpu" >&5
+ # ..and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_BUILD_OS="$VAR_OS"
+ OPENJDK_BUILD_OS_API="$VAR_OS_API"
+ OPENJDK_BUILD_OS_ENV="$VAR_OS_ENV"
+ OPENJDK_BUILD_CPU="$VAR_CPU"
+ OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-build os-cpu" >&5
$as_echo_n "checking openjdk-build os-cpu... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" >&5
$as_echo "$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU" >&6; }
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
case "$host_os" in
*linux*)
@@ -6888,60 +6888,60 @@
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
powerpc64)
VAR_CPU=ppc64
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390)
VAR_CPU=s390
VAR_CPU_ARCH=s390
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390x)
VAR_CPU=s390x
VAR_CPU_ARCH=s390
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparc)
VAR_CPU=sparc
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparcv9)
VAR_CPU=sparcv9
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
*)
as_fn_error $? "unsupported cpu $host_cpu" "$LINENO" 5
;;
esac
- # ... and setup our own variables. (Do this explicitely to facilitate searching)
- OPENJDK_TARGET_OS="$VAR_OS"
- OPENJDK_TARGET_OS_API="$VAR_OS_API"
- OPENJDK_TARGET_OS_ENV="$VAR_OS_ENV"
- OPENJDK_TARGET_CPU="$VAR_CPU"
- OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
-
-
-
-
-
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-target os-cpu" >&5
+ # ... and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_TARGET_OS="$VAR_OS"
+ OPENJDK_TARGET_OS_API="$VAR_OS_API"
+ OPENJDK_TARGET_OS_ENV="$VAR_OS_ENV"
+ OPENJDK_TARGET_CPU="$VAR_CPU"
+ OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking openjdk-target os-cpu" >&5
$as_echo_n "checking openjdk-target os-cpu... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" >&5
$as_echo "$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU" >&6; }
@@ -6991,168 +6991,167 @@
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking compilation type" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking compilation type" >&5
$as_echo_n "checking compilation type... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMPILE_TYPE" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $COMPILE_TYPE" >&5
$as_echo "$COMPILE_TYPE" >&6; }
- if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- REQUIRED_OS_NAME=SunOS
- REQUIRED_OS_VERSION=5.10
- fi
- if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
- REQUIRED_OS_NAME=Linux
- REQUIRED_OS_VERSION=2.6
- fi
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- REQUIRED_OS_NAME=Windows
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
- REQUIRED_OS_VERSION=5.2
- else
- REQUIRED_OS_VERSION=5.1
- fi
- fi
- if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- REQUIRED_OS_NAME=Darwin
- REQUIRED_OS_VERSION=11.2
- fi
-
-
-
-
-
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of x86 and x86_64
- OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY="i586"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except MacOSX replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_LEGACY="amd64"
- fi
-
-
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of x86 and x86_64.
- OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
- elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
- fi
-
-
- # This is the name of the cpu (but using i386 and amd64 instead of
- # x86 and x86_64, respectively), preceeded by a /, to be used when
- # locating libraries. On macosx, it's empty, though.
- OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- OPENJDK_TARGET_CPU_LIBDIR=""
- fi
-
-
- # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
- # /amd64 or /sparcv9. This string is appended to some library paths, like this:
- # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
- OPENJDK_TARGET_CPU_ISADIR=""
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_ISADIR="/amd64"
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
- fi
- fi
-
-
- # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
- OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
- # On linux only, we replace x86 with i386.
- OPENJDK_TARGET_CPU_OSARCH="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_OSARCH="amd64"
- fi
-
-
- OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_JLI="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_JLI="amd64"
- fi
- # Now setup the -D flags for building libjli.
- OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
- OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
- elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
- OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
- fi
- fi
-
-
- # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
- if test "x$OPENJDK_TARGET_OS_API" = xposix; then
- OPENJDK_TARGET_OS_API_DIR="solaris"
- fi
- if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
- OPENJDK_TARGET_OS_API_DIR="windows"
- fi
-
-
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- A_LP64="LP64:="
- # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
- # unpack200.exe
- if test "x$OPENJDK_TARGET_OS" = xlinux || test "x$OPENJDK_TARGET_OS" = xmacosx; then
- ADD_LP64="-D_LP64=1"
- fi
- fi
- LP64=$A_LP64
-
-
- if test "x$COMPILE_TYPE" = "xcross"; then
- # FIXME: ... or should this include reduced builds..?
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
- else
- DEFINE_CROSS_COMPILE_ARCH=""
- fi
-
-
- # ZERO_ARCHDEF is used to enable architecture-specific code
- case "${OPENJDK_TARGET_CPU}" in
- ppc*) ZERO_ARCHDEF=PPC ;;
- s390*) ZERO_ARCHDEF=S390 ;;
- sparc*) ZERO_ARCHDEF=SPARC ;;
- x86_64*) ZERO_ARCHDEF=AMD64 ;;
- x86) ZERO_ARCHDEF=IA32 ;;
- *) ZERO_ARCHDEF=$(echo "${OPENJDK_TARGET_CPU_LEGACY_LIB}" | tr a-z A-Z)
- esac
-
+ if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ REQUIRED_OS_NAME=SunOS
+ REQUIRED_OS_VERSION=5.10
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
+ REQUIRED_OS_NAME=Linux
+ REQUIRED_OS_VERSION=2.6
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ REQUIRED_OS_NAME=Windows
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
+ REQUIRED_OS_VERSION=5.2
+ else
+ REQUIRED_OS_VERSION=5.1
+ fi
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ REQUIRED_OS_NAME=Darwin
+ REQUIRED_OS_VERSION=11.2
+ fi
+
+
+
+
+
+ # Also store the legacy naming of the cpu.
+ # Ie i586 and amd64 instead of x86 and x86_64
+ OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY="i586"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except MacOSX replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_LEGACY="amd64"
+ fi
+
+
+ # And the second legacy naming of the cpu.
+ # Ie i386 and amd64 instead of x86 and x86_64.
+ OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
+ elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
+ fi
+
+
+ # This is the name of the cpu (but using i386 and amd64 instead of
+ # x86 and x86_64, respectively), preceeded by a /, to be used when
+ # locating libraries. On macosx, it's empty, though.
+ OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ OPENJDK_TARGET_CPU_LIBDIR=""
+ fi
+
+
+ # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
+ # /amd64 or /sparcv9. This string is appended to some library paths, like this:
+ # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
+ OPENJDK_TARGET_CPU_ISADIR=""
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_ISADIR="/amd64"
+ elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
+ OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
+ fi
+ fi
+
+
+ # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
+ OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
+ # On linux only, we replace x86 with i386.
+ OPENJDK_TARGET_CPU_OSARCH="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_OSARCH="amd64"
+ fi
+
+
+ OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_JLI="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_JLI="amd64"
+ fi
+ # Now setup the -D flags for building libjli.
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
+ fi
+ fi
+
+
+ # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
+ if test "x$OPENJDK_TARGET_OS_API" = xposix; then
+ OPENJDK_TARGET_OS_API_DIR="solaris"
+ fi
+ if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
+ OPENJDK_TARGET_OS_API_DIR="windows"
+ fi
+
+
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ A_LP64="LP64:="
+ # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
+ # unpack200.exe
+ if test "x$OPENJDK_TARGET_OS" = xlinux || test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ ADD_LP64="-D_LP64=1"
+ fi
+ fi
+ LP64=$A_LP64
+
+
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ # FIXME: ... or should this include reduced builds..?
+ DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
+ else
+ DEFINE_CROSS_COMPILE_ARCH=""
+ fi
+
+
+ # ZERO_ARCHDEF is used to enable architecture-specific code
+ case "${OPENJDK_TARGET_CPU}" in
+ ppc*) ZERO_ARCHDEF=PPC ;;
+ s390*) ZERO_ARCHDEF=S390 ;;
+ sparc*) ZERO_ARCHDEF=SPARC ;;
+ x86_64*) ZERO_ARCHDEF=AMD64 ;;
+ x86) ZERO_ARCHDEF=IA32 ;;
+ *) ZERO_ARCHDEF=$(echo "${OPENJDK_TARGET_CPU_LEGACY_LIB}" | tr a-z A-Z)
+ esac
# Continue setting up basic stuff. Most remaining code require fundamental tools.
-# Locate the directory of this script.
-SCRIPT="$0"
-AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
-
-# Where is the source? It is located two levels above the configure script.
-CURDIR="$PWD"
-cd "$AUTOCONF_DIR/../.."
-SRC_ROOT="`$THEPWDCMD -L`"
-
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- PATH_SEP=";"
+ # Locate the directory of this script.
+ SCRIPT="$0"
+ AUTOCONF_DIR=`cd \`$DIRNAME $SCRIPT\`; $THEPWDCMD -L`
+
+ # Where is the source? It is located two levels above the configure script.
+ CURDIR="$PWD"
+ cd "$AUTOCONF_DIR/../.."
+ SRC_ROOT="`$THEPWDCMD -L`"
+
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ PATH_SEP=";"
SRC_ROOT_LENGTH=`$THEPWDCMD -L|$WC -m`
if test $SRC_ROOT_LENGTH -gt 100; then
- as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
+ as_fn_error $? "Your base path is too long. It is $SRC_ROOT_LENGTH characters long, but only 100 is supported" "$LINENO" 5
fi
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -7171,7 +7170,7 @@
as_fn_error $? "Cannot continue" "$LINENO" 5
fi
if test "x$CYGPATH" = x; then
- as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
+ as_fn_error $? "Something is wrong with your cygwin installation since I cannot find cygpath.exe in your path" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking cygwin root directory as unix-style path" >&5
$as_echo_n "checking cygwin root directory as unix-style path... " >&6; }
@@ -7184,7 +7183,7 @@
WINDOWS_ENV_ROOT_PATH="$CYGWIN_ROOT_PATH"
test_cygdrive_prefix=`$ECHO $CYGWIN_ROOT_PATH | $GREP ^/cygdrive/`
if test "x$test_cygdrive_prefix" = x; then
- as_fn_error $? "Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c." "$LINENO" 5
+ as_fn_error $? "Your cygdrive prefix is not /cygdrive. This is currently not supported. Change with mount -c." "$LINENO" 5
fi
elif test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking msys release" >&5
@@ -7239,13 +7238,13 @@
$as_echo "$as_me: WARNING: It seems that your find utility is non-standard." >&2;}
fi
-else
- PATH_SEP=":"
-fi
-
-
-
-cd "$CURDIR"
+ else
+ PATH_SEP=":"
+ fi
+
+
+
+ cd "$CURDIR"
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -7492,13 +7491,13 @@
fi
-if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
+ if test "x$OPENJDK_BUILD_OS" = "xsolaris"; then
# Add extra search paths on solaris for utilities like ar and as etc...
PATH="$PATH:/usr/ccs/bin:/usr/sfw/bin:/opt/csw/bin"
-fi
-
-# You can force the sys-root if the sys-root encoded into the cross compiler tools
-# is not correct.
+ fi
+
+ # You can force the sys-root if the sys-root encoded into the cross compiler tools
+ # is not correct.
# Check whether --with-sys-root was given.
if test "${with_sys_root+set}" = set; then :
@@ -7506,11 +7505,11 @@
fi
-if test "x$with_sys_root" != x; then
- SYS_ROOT=$with_sys_root
-else
- SYS_ROOT=/
-fi
+ if test "x$with_sys_root" != x; then
+ SYS_ROOT=$with_sys_root
+ else
+ SYS_ROOT=/
+ fi
@@ -7525,9 +7524,9 @@
# Check whether --with-devkit was given.
if test "${with_devkit+set}" = set; then :
withval=$with_devkit;
- if test "x$with_sys_root" != x; then
- as_fn_error $? "Cannot specify both --with-devkit and --with-sys-root at the same time" "$LINENO" 5
- fi
+ if test "x$with_sys_root" != x; then
+ as_fn_error $? "Cannot specify both --with-devkit and --with-sys-root at the same time" "$LINENO" 5
+ fi
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -7657,20 +7656,20 @@
TOOLS_DIR="$TOOLS_DIR:$with_devkit/bin"
fi
- if test -d "$with_devkit/$host_alias/libc"; then
- SYS_ROOT=$with_devkit/$host_alias/libc
- elif test -d "$with_devkit/$host/sys-root"; then
- SYS_ROOT=$with_devkit/$host/sys-root
- fi
-
-fi
-
-
-
-# Setup default logging of stdout and stderr to build.log in the output root.
-BUILD_LOG='$(OUTPUT_ROOT)/build.log'
-BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
-BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
+ if test -d "$with_devkit/$host_alias/libc"; then
+ SYS_ROOT=$with_devkit/$host_alias/libc
+ elif test -d "$with_devkit/$host/sys-root"; then
+ SYS_ROOT=$with_devkit/$host/sys-root
+ fi
+
+fi
+
+
+
+ # Setup default logging of stdout and stderr to build.log in the output root.
+ BUILD_LOG='$(OUTPUT_ROOT)/build.log'
+ BUILD_LOG_PREVIOUS='$(OUTPUT_ROOT)/build.log.old'
+ BUILD_LOG_WRAPPER='$(BASH) $(SRC_ROOT)/common/bin/logger.sh $(BUILD_LOG)'
@@ -7725,18 +7724,18 @@
# These are needed to be able to create a configuration name (and thus the output directory)
-###############################################################################
-#
-# Check which variant of the JDK that we want to build.
-# Currently we have:
-# normal: standard edition
-# but the custom make system may add other variants
-#
-# Effectively the JDK variant gives a name to a specific set of
-# modules to compile into the JDK. In the future, these modules
-# might even be Jigsaw modules.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of the JDK to build" >&5
+ ###############################################################################
+ #
+ # Check which variant of the JDK that we want to build.
+ # Currently we have:
+ # normal: standard edition
+ # but the custom make system may add other variants
+ #
+ # Effectively the JDK variant gives a name to a specific set of
+ # modules to compile into the JDK. In the future, these modules
+ # might even be Jigsaw modules.
+ #
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of the JDK to build" >&5
$as_echo_n "checking which variant of the JDK to build... " >&6; }
# Check whether --with-jdk-variant was given.
@@ -7745,31 +7744,31 @@
fi
-if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
+ if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
JDK_VARIANT="normal"
-else
+ else
as_fn_error $? "The available JDK variants are: normal" "$LINENO" 5
-fi
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $JDK_VARIANT" >&5
+ fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $JDK_VARIANT" >&5
$as_echo "$JDK_VARIANT" >&6; }
-###############################################################################
-#
-# Check which variants of the JVM that we want to build.
-# Currently we have:
-# server: normal interpreter and a tiered C1/C2 compiler
-# client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms)
-# minimal1: reduced form of client with optional VM services and features stripped out
-# kernel: kernel footprint JVM that passes the TCK without major performance problems,
-# ie normal interpreter and C1, only the serial GC, kernel jvmti etc
-# zero: no machine code interpreter, no compiler
-# zeroshark: zero interpreter and shark/llvm compiler backend
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variants of the JVM to build" >&5
+ ###############################################################################
+ #
+ # Check which variants of the JVM that we want to build.
+ # Currently we have:
+ # server: normal interpreter and a tiered C1/C2 compiler
+ # client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms)
+ # minimal1: reduced form of client with optional VM services and features stripped out
+ # kernel: kernel footprint JVM that passes the TCK without major performance problems,
+ # ie normal interpreter and C1, only the serial GC, kernel jvmti etc
+ # zero: no machine code interpreter, no compiler
+ # zeroshark: zero interpreter and shark/llvm compiler backend
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variants of the JVM to build" >&5
$as_echo_n "checking which variants of the JVM to build... " >&6; }
# Check whether --with-jvm-variants was given.
@@ -7778,87 +7777,86 @@
fi
-if test "x$with_jvm_variants" = x; then
- with_jvm_variants="server"
-fi
-
-JVM_VARIANTS=",$with_jvm_variants,"
-TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/minimal1,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'`
-
-if test "x$TEST_VARIANTS" != "x,"; then
- as_fn_error $? "The available JVM variants are: server, client, minimal1, kernel, zero, zeroshark" "$LINENO" 5
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_jvm_variants" >&5
+ if test "x$with_jvm_variants" = x; then
+ with_jvm_variants="server"
+ fi
+
+ JVM_VARIANTS=",$with_jvm_variants,"
+ TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/minimal1,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'`
+
+ if test "x$TEST_VARIANTS" != "x,"; then
+ as_fn_error $? "The available JVM variants are: server, client, minimal1, kernel, zero, zeroshark" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_jvm_variants" >&5
$as_echo "$with_jvm_variants" >&6; }
-JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'`
-JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'`
-JVM_VARIANT_MINIMAL1=`$ECHO "$JVM_VARIANTS" | $SED -e '/,minimal1,/!s/.*/false/g' -e '/,minimal1,/s/.*/true/g'`
-JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'`
-JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'`
-JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'`
-
-if test "x$JVM_VARIANT_CLIENT" = xtrue; then
+ JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'`
+ JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'`
+ JVM_VARIANT_MINIMAL1=`$ECHO "$JVM_VARIANTS" | $SED -e '/,minimal1,/!s/.*/false/g' -e '/,minimal1,/s/.*/true/g'`
+ JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'`
+ JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'`
+ JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'`
+
+ if test "x$JVM_VARIANT_CLIENT" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- as_fn_error $? "You cannot build a client JVM for a 64-bit machine." "$LINENO" 5
- fi
-fi
-if test "x$JVM_VARIANT_KERNEL" = xtrue; then
+ as_fn_error $? "You cannot build a client JVM for a 64-bit machine." "$LINENO" 5
+ fi
+ fi
+ if test "x$JVM_VARIANT_KERNEL" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- as_fn_error $? "You cannot build a kernel JVM for a 64-bit machine." "$LINENO" 5
- fi
-fi
-if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
+ as_fn_error $? "You cannot build a kernel JVM for a 64-bit machine." "$LINENO" 5
+ fi
+ fi
+ if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- as_fn_error $? "You cannot build a minimal JVM for a 64-bit machine." "$LINENO" 5
- fi
-fi
-
-# Replace the commas with AND for use in the build directory name.
-ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'`
-COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/minimal1,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'`
-if test "x$COUNT_VARIANTS" != "x,1"; then
+ as_fn_error $? "You cannot build a minimal JVM for a 64-bit machine." "$LINENO" 5
+ fi
+ fi
+
+ # Replace the commas with AND for use in the build directory name.
+ ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'`
+ COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/minimal1,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'`
+ if test "x$COUNT_VARIANTS" != "x,1"; then
BUILDING_MULTIPLE_JVM_VARIANTS=yes
-else
+ else
BUILDING_MULTIPLE_JVM_VARIANTS=no
-fi
-
-
-
-
-
-
-
-
-
-INCLUDE_SA=true
-if test "x$JVM_VARIANT_ZERO" = xtrue ; then
+ fi
+
+
+
+
+
+
+
+
+
+ INCLUDE_SA=true
+ if test "x$JVM_VARIANT_ZERO" = xtrue ; then
INCLUDE_SA=false
-fi
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue ; then
+ fi
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue ; then
INCLUDE_SA=false
-fi
-
-
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- MACOSX_UNIVERSAL="true"
-fi
-
-
-
-
-
-###############################################################################
-#
-# Set the debug level
-# release: no debug information, all optimizations, no asserts.
-# fastdebug: debug information (-g), all optimizations, all asserts
-# slowdebug: debug information (-g), no optimizations, all asserts
-#
-DEBUG_LEVEL="release"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which debug level to use" >&5
+ fi
+
+
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ MACOSX_UNIVERSAL="true"
+ fi
+
+
+
+
+ ###############################################################################
+ #
+ # Set the debug level
+ # release: no debug information, all optimizations, no asserts.
+ # fastdebug: debug information (-g), all optimizations, all asserts
+ # slowdebug: debug information (-g), no optimizations, all asserts
+ #
+ DEBUG_LEVEL="release"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which debug level to use" >&5
$as_echo_n "checking which debug level to use... " >&6; }
-# Check whether --enable-debug was given.
+ # Check whether --enable-debug was given.
if test "${enable_debug+set}" = set; then :
enableval=$enable_debug;
ENABLE_DEBUG="${enableval}"
@@ -7875,96 +7873,96 @@
withval=$with_debug_level;
DEBUG_LEVEL="${withval}"
if test "x$ENABLE_DEBUG" = xyes; then
- as_fn_error $? "You cannot use both --enable-debug and --with-debug-level at the same time." "$LINENO" 5
- fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEBUG_LEVEL" >&5
+ as_fn_error $? "You cannot use both --enable-debug and --with-debug-level at the same time." "$LINENO" 5
+ fi
+
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DEBUG_LEVEL" >&5
$as_echo "$DEBUG_LEVEL" >&6; }
-if test "x$DEBUG_LEVEL" != xrelease && \
- test "x$DEBUG_LEVEL" != xfastdebug && \
- test "x$DEBUG_LEVEL" != xslowdebug; then
- as_fn_error $? "Allowed debug levels are: release, fastdebug and slowdebug" "$LINENO" 5
-fi
-
-
-###############################################################################
-#
-# Setup legacy vars/targets and new vars to deal with different debug levels.
-#
-
-case $DEBUG_LEVEL in
- release )
- VARIANT="OPT"
- FASTDEBUG="false"
- DEBUG_CLASSFILES="false"
- BUILD_VARIANT_RELEASE=""
- HOTSPOT_DEBUG_LEVEL="product"
- HOTSPOT_EXPORT="product"
- ;;
- fastdebug )
- VARIANT="DBG"
- FASTDEBUG="true"
- DEBUG_CLASSFILES="true"
- BUILD_VARIANT_RELEASE="-fastdebug"
- HOTSPOT_DEBUG_LEVEL="fastdebug"
- HOTSPOT_EXPORT="fastdebug"
- ;;
- slowdebug )
- VARIANT="DBG"
- FASTDEBUG="false"
- DEBUG_CLASSFILES="true"
- BUILD_VARIANT_RELEASE="-debug"
- HOTSPOT_DEBUG_LEVEL="jvmg"
- HOTSPOT_EXPORT="debug"
- ;;
-esac
-
-#####
-# Generate the legacy makefile targets for hotspot.
-# The hotspot api for selecting the build artifacts, really, needs to be improved.
-# JDK-7195896 will fix this on the hotspot side by using the JVM_VARIANT_* variables to
-# determine what needs to be built. All we will need to set here is all_product, all_fastdebug etc
-# But until then ...
-HOTSPOT_TARGET=""
-
-if test "x$JVM_VARIANT_SERVER" = xtrue; then
+ if test "x$DEBUG_LEVEL" != xrelease && \
+ test "x$DEBUG_LEVEL" != xfastdebug && \
+ test "x$DEBUG_LEVEL" != xslowdebug; then
+ as_fn_error $? "Allowed debug levels are: release, fastdebug and slowdebug" "$LINENO" 5
+ fi
+
+
+ ###############################################################################
+ #
+ # Setup legacy vars/targets and new vars to deal with different debug levels.
+ #
+
+ case $DEBUG_LEVEL in
+ release )
+ VARIANT="OPT"
+ FASTDEBUG="false"
+ DEBUG_CLASSFILES="false"
+ BUILD_VARIANT_RELEASE=""
+ HOTSPOT_DEBUG_LEVEL="product"
+ HOTSPOT_EXPORT="product"
+ ;;
+ fastdebug )
+ VARIANT="DBG"
+ FASTDEBUG="true"
+ DEBUG_CLASSFILES="true"
+ BUILD_VARIANT_RELEASE="-fastdebug"
+ HOTSPOT_DEBUG_LEVEL="fastdebug"
+ HOTSPOT_EXPORT="fastdebug"
+ ;;
+ slowdebug )
+ VARIANT="DBG"
+ FASTDEBUG="false"
+ DEBUG_CLASSFILES="true"
+ BUILD_VARIANT_RELEASE="-debug"
+ HOTSPOT_DEBUG_LEVEL="jvmg"
+ HOTSPOT_EXPORT="debug"
+ ;;
+ esac
+
+ #####
+ # Generate the legacy makefile targets for hotspot.
+ # The hotspot api for selecting the build artifacts, really, needs to be improved.
+ # JDK-7195896 will fix this on the hotspot side by using the JVM_VARIANT_* variables to
+ # determine what needs to be built. All we will need to set here is all_product, all_fastdebug etc
+ # But until then ...
+ HOTSPOT_TARGET=""
+
+ if test "x$JVM_VARIANT_SERVER" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL} "
-fi
-
-if test "x$JVM_VARIANT_CLIENT" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_CLIENT" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}1 "
-fi
-
-if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}minimal1 "
-fi
-
-if test "x$JVM_VARIANT_KERNEL" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_KERNEL" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}kernel "
-fi
-
-if test "x$JVM_VARIANT_ZERO" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_ZERO" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}zero "
-fi
-
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}shark "
-fi
-
-HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
-
-# On Macosx universal binaries are produced, but they only contain
-# 64 bit intel. This invalidates control of which jvms are built
-# from configure, but only server is valid anyway. Fix this
-# when hotspot makefiles are rewritten.
-if test "x$MACOSX_UNIVERSAL" = xtrue; then
+ fi
+
+ HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
+
+ # On Macosx universal binaries are produced, but they only contain
+ # 64 bit intel. This invalidates control of which jvms are built
+ # from configure, but only server is valid anyway. Fix this
+ # when hotspot makefiles are rewritten.
+ if test "x$MACOSX_UNIVERSAL" = xtrue; then
HOTSPOT_TARGET=universal_${HOTSPOT_EXPORT}
-fi
-
-#####
+ fi
+
+ #####
@@ -7987,27 +7985,27 @@
fi
-# Test from where we are running configure, in or outside of src root.
-if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
- || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
- || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
+ # Test from where we are running configure, in or outside of src root.
+ if test "x$CURDIR" = "x$SRC_ROOT" || test "x$CURDIR" = "x$SRC_ROOT/common" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/autoconf" \
+ || test "x$CURDIR" = "x$SRC_ROOT/common/makefiles" ; then
# We are running configure from the src root.
# Create a default ./build/target-variant-debuglevel output root.
if test "x${CONF_NAME}" = x; then
- CONF_NAME="${OPENJDK_TARGET_OS}-${OPENJDK_TARGET_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}"
+ CONF_NAME="${OPENJDK_TARGET_OS}-${OPENJDK_TARGET_CPU}-${JDK_VARIANT}-${ANDED_JVM_VARIANTS}-${DEBUG_LEVEL}"
fi
OUTPUT_ROOT="$SRC_ROOT/build/${CONF_NAME}"
$MKDIR -p "$OUTPUT_ROOT"
if test ! -d "$OUTPUT_ROOT"; then
- as_fn_error $? "Could not create build directory $OUTPUT_ROOT" "$LINENO" 5
- fi
-else
+ as_fn_error $? "Could not create build directory $OUTPUT_ROOT" "$LINENO" 5
+ fi
+ else
# We are running configure from outside of the src dir.
# Then use the current directory as output dir!
# If configuration is situated in normal build directory, just use the build
# directory name as configuration name, otherwise use the complete path.
if test "x${CONF_NAME}" = x; then
- CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"`
+ CONF_NAME=`$ECHO $CURDIR | $SED -e "s!^${SRC_ROOT}/build/!!"`
fi
OUTPUT_ROOT="$CURDIR"
@@ -8021,7 +8019,7 @@
# Configure has already touched config.log and confdefs.h in the current dir when this check
# is performed.
filtered_files=`$ECHO "$files_present" | $SED -e 's/config.log//g' -e 's/confdefs.h//g' -e 's/ //g' \
- | $TR -d '\n'`
+ | $TR -d '\n'`
if test "x$filtered_files" != x; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: Current directory is $CURDIR." >&5
$as_echo "$as_me: Current directory is $CURDIR." >&6;}
@@ -8040,10 +8038,10 @@
as_fn_error $? "Will not continue creating configuration in $CURDIR" "$LINENO" 5
fi
fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what configuration name to use" >&5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking what configuration name to use" >&5
$as_echo_n "checking what configuration name to use... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CONF_NAME" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CONF_NAME" >&5
$as_echo "$CONF_NAME" >&6; }
@@ -8169,44 +8167,44 @@
fi
-SPEC=$OUTPUT_ROOT/spec.gmk
-
-CONF_NAME=$CONF_NAME
-
-OUTPUT_ROOT=$OUTPUT_ROOT
-
-
-# Most of the probed defines are put into config.h
-ac_config_headers="$ac_config_headers $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in"
-
-# The spec.gmk file contains all variables for the make system.
-ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in"
-
-# The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
-ac_config_files="$ac_config_files $OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in"
-
-# The bootcycle-spec.gmk file contains support for boot cycle builds.
-ac_config_files="$ac_config_files $OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in"
-
-# The compare.sh is used to compare the build output to other builds.
-ac_config_files="$ac_config_files $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in"
-
-# Spec.sh is currently used by compare-objects.sh
-ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in"
-
-# The generated Makefile knows where the spec.gmk is and where the source is.
-# You can run make from the OUTPUT_ROOT, or from the top-level Makefile
-# which will look for generated configurations
-ac_config_files="$ac_config_files $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in"
-
-
-# Save the arguments given to us
-echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments
+ SPEC=$OUTPUT_ROOT/spec.gmk
+
+ CONF_NAME=$CONF_NAME
+
+ OUTPUT_ROOT=$OUTPUT_ROOT
+
+
+ # Most of the probed defines are put into config.h
+ ac_config_headers="$ac_config_headers $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in"
+
+ # The spec.gmk file contains all variables for the make system.
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in"
+
+ # The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in"
+
+ # The bootcycle-spec.gmk file contains support for boot cycle builds.
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in"
+
+ # The compare.sh is used to compare the build output to other builds.
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in"
+
+ # Spec.sh is currently used by compare-objects.sh
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in"
+
+ # The generated Makefile knows where the spec.gmk is and where the source is.
+ # You can run make from the OUTPUT_ROOT, or from the top-level Makefile
+ # which will look for generated configurations
+ ac_config_files="$ac_config_files $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in"
+
+
+ # Save the arguments given to us
+ echo "$CONFIGURE_COMMAND_LINE" > $OUTPUT_ROOT/configure-arguments
# Must be done before we can call HELP_MSG_MISSING_DEPENDENCY.
- for ac_prog in apt-get yum port pkgutil pkgadd
+ for ac_prog in apt-get yum port pkgutil pkgadd
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -8314,8 +8312,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -8330,8 +8328,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -8359,9 +8357,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
@@ -8537,29 +8535,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -8671,8 +8669,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -8687,8 +8685,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -8716,9 +8714,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
@@ -8894,29 +8892,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -9025,8 +9023,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9041,8 +9039,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9070,9 +9068,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
@@ -9248,29 +9246,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -9384,8 +9382,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9400,8 +9398,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9429,9 +9427,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
@@ -9607,29 +9605,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -9737,8 +9735,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9753,8 +9751,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -9782,9 +9780,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$new_path\", is invalid." >&6;}
@@ -9960,29 +9958,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of FOUND_MAKE, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of FOUND_MAKE" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- FOUND_MAKE="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
+ FOUND_MAKE="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting FOUND_MAKE to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting FOUND_MAKE to \"$new_complete\"" >&6;}
- fi
+ fi
fi
fi
@@ -10006,34 +10004,34 @@
- # Test if find supports -delete
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5
+ # Test if find supports -delete
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if find supports -delete" >&5
$as_echo_n "checking if find supports -delete... " >&6; }
- FIND_DELETE="-delete"
-
- DELETEDIR=`$MKTEMP -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
-
- echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
-
- TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
- if test -f $DELETEDIR/TestIfFindSupportsDelete; then
- # No, it does not.
- rm $DELETEDIR/TestIfFindSupportsDelete
- FIND_DELETE="-exec rm \{\} \+"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ FIND_DELETE="-delete"
+
+ DELETEDIR=`$MKTEMP -d tmp.XXXXXXXXXX` || (echo Could not create temporary directory!; exit $?)
+
+ echo Hejsan > $DELETEDIR/TestIfFindSupportsDelete
+
+ TEST_DELETE=`$FIND "$DELETEDIR" -name TestIfFindSupportsDelete $FIND_DELETE 2>&1`
+ if test -f $DELETEDIR/TestIfFindSupportsDelete; then
+ # No, it does not.
+ rm $DELETEDIR/TestIfFindSupportsDelete
+ FIND_DELETE="-exec rm \{\} \+"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- fi
- rmdir $DELETEDIR
-
-
-
-# These tools might not be installed by default,
-# need hint on how to install them.
-
- for ac_prog in unzip
+ fi
+ rmdir $DELETEDIR
+
+
+
+ # These tools might not be installed by default,
+ # need hint on how to install them.
+
+ for ac_prog in unzip
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10079,20 +10077,20 @@
done
- if test "x$UNZIP" = x; then
- if test "xunzip" = x; then
- PROG_NAME=unzip
- else
- PROG_NAME=unzip
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
- for ac_prog in zip
+ if test "x$UNZIP" = x; then
+ if test "xunzip" = x; then
+ PROG_NAME=unzip
+ else
+ PROG_NAME=unzip
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ for ac_prog in zip
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10138,22 +10136,22 @@
done
- if test "x$ZIP" = x; then
- if test "xzip" = x; then
- PROG_NAME=zip
- else
- PROG_NAME=zip
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-
-# Non-required basic tools
-
-# Extract the first word of "ldd", so it can be a program name with args.
+ if test "x$ZIP" = x; then
+ if test "xzip" = x; then
+ PROG_NAME=zip
+ else
+ PROG_NAME=zip
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+
+ # Non-required basic tools
+
+ # Extract the first word of "ldd", so it can be a program name with args.
set dummy ldd; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10193,13 +10191,13 @@
fi
-if test "x$LDD" = "x"; then
+ if test "x$LDD" = "x"; then
# List shared lib dependencies is used for
# debug output and checking for forbidden dependencies.
# We can build without it.
LDD="true"
-fi
-# Extract the first word of "otool", so it can be a program name with args.
+ fi
+ # Extract the first word of "otool", so it can be a program name with args.
set dummy otool; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10239,10 +10237,10 @@
fi
-if test "x$OTOOL" = "x"; then
- OTOOL="true"
-fi
-for ac_prog in readelf greadelf
+ if test "x$OTOOL" = "x"; then
+ OTOOL="true"
+ fi
+ for ac_prog in readelf greadelf
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10287,7 +10285,7 @@
test -n "$READELF" && break
done
-# Extract the first word of "hg", so it can be a program name with args.
+ # Extract the first word of "hg", so it can be a program name with args.
set dummy hg; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10327,7 +10325,7 @@
fi
-# Extract the first word of "stat", so it can be a program name with args.
+ # Extract the first word of "stat", so it can be a program name with args.
set dummy stat; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10367,7 +10365,7 @@
fi
-# Extract the first word of "time", so it can be a program name with args.
+ # Extract the first word of "time", so it can be a program name with args.
set dummy time; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10407,18 +10405,18 @@
fi
-# Check if it's GNU time
-IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
-if test "x$IS_GNU_TIME" != x; then
- IS_GNU_TIME=yes
-else
- IS_GNU_TIME=no
-fi
-
-
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
-
- for ac_prog in comm
+ # Check if it's GNU time
+ IS_GNU_TIME=`$TIME --version 2>&1 | $GREP 'GNU time'`
+ if test "x$IS_GNU_TIME" != x; then
+ IS_GNU_TIME=yes
+ else
+ IS_GNU_TIME=no
+ fi
+
+
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+
+ for ac_prog in comm
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10464,23 +10462,23 @@
done
- if test "x$COMM" = x; then
- if test "xcomm" = x; then
- PROG_NAME=comm
- else
- PROG_NAME=comm
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
-fi
-
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
-
- for ac_prog in xattr
+ if test "x$COMM" = x; then
+ if test "xcomm" = x; then
+ PROG_NAME=comm
+ else
+ PROG_NAME=comm
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+
+ for ac_prog in xattr
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10526,19 +10524,19 @@
done
- if test "x$XATTR" = x; then
- if test "xxattr" = x; then
- PROG_NAME=xattr
- else
- PROG_NAME=xattr
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
-
-
- # Extract the first word of "codesign", so it can be a program name with args.
+ if test "x$XATTR" = x; then
+ if test "xxattr" = x; then
+ PROG_NAME=xattr
+ else
+ PROG_NAME=xattr
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+
+ # Extract the first word of "codesign", so it can be a program name with args.
set dummy codesign; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -10578,23 +10576,23 @@
fi
- if test "x$CODESIGN" != "x"; then
- # Verify that the openjdk_codesign certificate is present
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if openjdk_codesign certificate is present" >&5
+ if test "x$CODESIGN" != "x"; then
+ # Verify that the openjdk_codesign certificate is present
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if openjdk_codesign certificate is present" >&5
$as_echo_n "checking if openjdk_codesign certificate is present... " >&6; }
- rm -f codesign-testfile
- touch codesign-testfile
- codesign -s openjdk_codesign codesign-testfile 2>&5 >&5 || CODESIGN=
- rm -f codesign-testfile
- if test "x$CODESIGN" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ rm -f codesign-testfile
+ touch codesign-testfile
+ codesign -s openjdk_codesign codesign-testfile 2>&5 >&5 || CODESIGN=
+ rm -f codesign-testfile
+ if test "x$CODESIGN" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- fi
- fi
-fi
+ fi
+ fi
+ fi
# Check if pkg-config is available.
@@ -10717,14 +10715,14 @@
# After basic tools have been setup, we can check build os specific details.
-###############################################################################
-
-# Note that this is the build platform OS version!
-
-OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`"
-OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`"
-OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`"
-OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`"
+ ###############################################################################
+
+ # Note that this is the build platform OS version!
+
+ OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`"
+ OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`"
+ OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`"
+ OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`"
@@ -10766,57 +10764,57 @@
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- if test "x$with_builddeps_conf" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for supplied builddeps configuration file" >&5
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ if test "x$with_builddeps_conf" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for supplied builddeps configuration file" >&5
$as_echo_n "checking for supplied builddeps configuration file... " >&6; }
- builddepsfile=$with_builddeps_conf
- if test -s $builddepsfile; then
- . $builddepsfile
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: loaded!" >&5
+ builddepsfile=$with_builddeps_conf
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: loaded!" >&5
$as_echo "loaded!" >&6; }
- else
- as_fn_error $? "The given builddeps conf file $with_builddeps_conf could not be loaded!" "$LINENO" 5
- fi
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builddeps.conf files in sources..." >&5
+ else
+ as_fn_error $? "The given builddeps conf file $with_builddeps_conf could not be loaded!" "$LINENO" 5
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for builddeps.conf files in sources..." >&5
$as_echo_n "checking for builddeps.conf files in sources...... " >&6; }
- builddepsfile=`mktemp`
- touch $builddepsfile
- # Put all found confs into a single file.
- find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
- # Source the file to acquire the variables
- if test -s $builddepsfile; then
- . $builddepsfile
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: found at least one!" >&5
+ builddepsfile=`mktemp`
+ touch $builddepsfile
+ # Put all found confs into a single file.
+ find ${SRC_ROOT} -name builddeps.conf -exec cat \{\} \; >> $builddepsfile
+ # Source the file to acquire the variables
+ if test -s $builddepsfile; then
+ . $builddepsfile
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: found at least one!" >&5
$as_echo "found at least one!" >&6; }
- else
- as_fn_error $? "Could not find any builddeps.conf at all!" "$LINENO" 5
- fi
- fi
- # Create build and target names that use _ instead of "-" and ".".
- # This is necessary to use them in variable names.
- build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
- target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
- # Extract rewrite information for build and target
- eval rewritten_build=\${REWRITE_${build_var}}
- if test "x$rewritten_build" = x; then
- rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
- echo Build stays the same $rewritten_build
- else
- echo Rewriting build for builddeps into $rewritten_build
- fi
- eval rewritten_target=\${REWRITE_${target_var}}
- if test "x$rewritten_target" = x; then
- rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
- echo Target stays the same $rewritten_target
- else
- echo Rewriting target for builddeps into $rewritten_target
- fi
- rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
- rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
- fi
- for ac_prog in 7z unzip
+ else
+ as_fn_error $? "Could not find any builddeps.conf at all!" "$LINENO" 5
+ fi
+ fi
+ # Create build and target names that use _ instead of "-" and ".".
+ # This is necessary to use them in variable names.
+ build_var=`echo ${OPENJDK_BUILD_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ target_var=`echo ${OPENJDK_TARGET_AUTOCONF_NAME} | tr '-' '_' | tr '.' '_'`
+ # Extract rewrite information for build and target
+ eval rewritten_build=\${REWRITE_${build_var}}
+ if test "x$rewritten_build" = x; then
+ rewritten_build=${OPENJDK_BUILD_AUTOCONF_NAME}
+ echo Build stays the same $rewritten_build
+ else
+ echo Rewriting build for builddeps into $rewritten_build
+ fi
+ eval rewritten_target=\${REWRITE_${target_var}}
+ if test "x$rewritten_target" = x; then
+ rewritten_target=${OPENJDK_TARGET_AUTOCONF_NAME}
+ echo Target stays the same $rewritten_target
+ else
+ echo Rewriting target for builddeps into $rewritten_target
+ fi
+ rewritten_build_var=`echo ${rewritten_build} | tr '-' '_' | tr '.' '_'`
+ rewritten_target_var=`echo ${rewritten_target} | tr '-' '_' | tr '.' '_'`
+ fi
+ for ac_prog in 7z unzip
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10858,11 +10856,11 @@
test -n "$BDEPS_UNZIP" && break
done
- if test "x$BDEPS_UNZIP" = x7z; then
- BDEPS_UNZIP="7z x"
- fi
-
- for ac_prog in wget lftp ftp
+ if test "x$BDEPS_UNZIP" = x7z; then
+ BDEPS_UNZIP="7z x"
+ fi
+
+ for ac_prog in wget lftp ftp
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -10915,14 +10913,14 @@
# We need build & target for this.
-###############################################################################
-#
-# Should we build a JDK/JVM with headful support (ie a graphical ui)?
-# We always build headless support.
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking headful support" >&5
+ ###############################################################################
+ #
+ # Should we build a JDK/JVM with headful support (ie a graphical ui)?
+ # We always build headless support.
+ #
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking headful support" >&5
$as_echo_n "checking headful support... " >&6; }
-# Check whether --enable-headful was given.
+ # Check whether --enable-headful was given.
if test "${enable_headful+set}" = set; then :
enableval=$enable_headful; SUPPORT_HEADFUL=${enable_headful}
else
@@ -10930,110 +10928,110 @@
fi
-SUPPORT_HEADLESS=yes
-BUILD_HEADLESS="BUILD_HEADLESS:=true"
-
-if test "x$SUPPORT_HEADFUL" = xyes; then
+ SUPPORT_HEADLESS=yes
+ BUILD_HEADLESS="BUILD_HEADLESS:=true"
+
+ if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
headful_msg="include support for both headful and headless"
-fi
-
-if test "x$SUPPORT_HEADFUL" = xno; then
+ fi
+
+ if test "x$SUPPORT_HEADFUL" = xno; then
# Thus we are building headless only.
BUILD_HEADLESS="BUILD_HEADLESS:=true"
headful_msg="headless only"
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $headful_msg" >&5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $headful_msg" >&5
$as_echo "$headful_msg" >&6; }
-# Control wether Hotspot runs Queens test after build.
-# Check whether --enable-hotspot-test-in-build was given.
+ # Control wether Hotspot runs Queens test after build.
+ # Check whether --enable-hotspot-test-in-build was given.
if test "${enable_hotspot_test_in_build+set}" = set; then :
enableval=$enable_hotspot_test_in_build;
else
enable_hotspot_test_in_build=no
fi
-if test "x$enable_hotspot_test_in_build" = "xyes"; then
+ if test "x$enable_hotspot_test_in_build" = "xyes"; then
TEST_IN_BUILD=true
-else
+ else
TEST_IN_BUILD=false
-fi
-
-
-###############################################################################
-#
-# Choose cacerts source file
-#
+ fi
+
+
+ ###############################################################################
+ #
+ # Choose cacerts source file
+ #
# Check whether --with-cacerts-file was given.
if test "${with_cacerts_file+set}" = set; then :
withval=$with_cacerts_file;
fi
-if test "x$with_cacerts_file" != x; then
+ if test "x$with_cacerts_file" != x; then
CACERTS_FILE=$with_cacerts_file
-else
+ else
CACERTS_FILE=${SRC_ROOT}/jdk/src/share/lib/security/cacerts
-fi
-
-
-###############################################################################
-#
-# Enable or disable unlimited crypto
-#
-# Check whether --enable-unlimited-crypto was given.
+ fi
+
+
+ ###############################################################################
+ #
+ # Enable or disable unlimited crypto
+ #
+ # Check whether --enable-unlimited-crypto was given.
if test "${enable_unlimited_crypto+set}" = set; then :
enableval=$enable_unlimited_crypto;
else
enable_unlimited_crypto=no
fi
-if test "x$enable_unlimited_crypto" = "xyes"; then
+ if test "x$enable_unlimited_crypto" = "xyes"; then
UNLIMITED_CRYPTO=true
-else
+ else
UNLIMITED_CRYPTO=false
-fi
-
-
-###############################################################################
-#
-# Enable or disable the elliptic curve crypto implementation
-#
-
-
-###############################################################################
-#
-# Compress jars
-#
-COMPRESS_JARS=false
-
-
-
-
-# Source the version numbers
-. $AUTOCONF_DIR/version-numbers
-
-# Get the settings from parameters
+ fi
+
+
+ ###############################################################################
+ #
+ # Enable or disable the elliptic curve crypto implementation
+ #
+
+
+ ###############################################################################
+ #
+ # Compress jars
+ #
+ COMPRESS_JARS=false
+
+
+
+
+ # Source the version numbers
+ . $AUTOCONF_DIR/version-numbers
+
+ # Get the settings from parameters
# Check whether --with-milestone was given.
if test "${with_milestone+set}" = set; then :
withval=$with_milestone;
fi
-if test "x$with_milestone" = xyes; then
- as_fn_error $? "Milestone must have a value" "$LINENO" 5
-elif test "x$with_milestone" != x; then
+ if test "x$with_milestone" = xyes; then
+ as_fn_error $? "Milestone must have a value" "$LINENO" 5
+ elif test "x$with_milestone" != x; then
MILESTONE="$with_milestone"
-fi
-if test "x$MILESTONE" = x; then
- MILESTONE=internal
-fi
+ fi
+ if test "x$MILESTONE" = x; then
+ MILESTONE=internal
+ fi
# Check whether --with-update-version was given.
@@ -11041,11 +11039,11 @@
withval=$with_update_version;
fi
-if test "x$with_update_version" = xyes; then
- as_fn_error $? "Update version must have a value" "$LINENO" 5
-elif test "x$with_update_version" != x; then
- JDK_UPDATE_VERSION="$with_update_version"
-fi
+ if test "x$with_update_version" = xyes; then
+ as_fn_error $? "Update version must have a value" "$LINENO" 5
+ elif test "x$with_update_version" != x; then
+ JDK_UPDATE_VERSION="$with_update_version"
+ fi
# Check whether --with-user-release-suffix was given.
@@ -11053,11 +11051,11 @@
withval=$with_user_release_suffix;
fi
-if test "x$with_user_release_suffix" = xyes; then
- as_fn_error $? "Release suffix must have a value" "$LINENO" 5
-elif test "x$with_user_release_suffix" != x; then
- USER_RELEASE_SUFFIX="$with_user_release_suffix"
-fi
+ if test "x$with_user_release_suffix" = xyes; then
+ as_fn_error $? "Release suffix must have a value" "$LINENO" 5
+ elif test "x$with_user_release_suffix" != x; then
+ USER_RELEASE_SUFFIX="$with_user_release_suffix"
+ fi
# Check whether --with-build-number was given.
@@ -11065,49 +11063,49 @@
withval=$with_build_number;
fi
-if test "x$with_build_number" = xyes; then
- as_fn_error $? "Build number must have a value" "$LINENO" 5
-elif test "x$with_build_number" != x; then
- JDK_BUILD_NUMBER="$with_build_number"
-fi
-# Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
-if test "x$JDK_BUILD_NUMBER" = x; then
- JDK_BUILD_NUMBER=b00
- if test "x$USER_RELEASE_SUFFIX" = x; then
- BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
- # Avoid [:alnum:] since it depends on the locale.
- CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
- USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- fi
-fi
-
-# Now set the JDK version, milestone, build number etc.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-COPYRIGHT_YEAR=`date +'%Y'`
-
-
-if test "x$JDK_UPDATE_VERSION" != x; then
- JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}"
-else
- JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}"
-fi
-
-
-COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'`
+ if test "x$with_build_number" = xyes; then
+ as_fn_error $? "Build number must have a value" "$LINENO" 5
+ elif test "x$with_build_number" != x; then
+ JDK_BUILD_NUMBER="$with_build_number"
+ fi
+ # Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
+ if test "x$JDK_BUILD_NUMBER" = x; then
+ JDK_BUILD_NUMBER=b00
+ if test "x$USER_RELEASE_SUFFIX" = x; then
+ BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
+ # Avoid [:alnum:] since it depends on the locale.
+ CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
+ USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+ fi
+
+ # Now set the JDK version, milestone, build number etc.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ COPYRIGHT_YEAR=`date +'%Y'`
+
+
+ if test "x$JDK_UPDATE_VERSION" != x; then
+ JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}"
+ else
+ JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}"
+ fi
+
+
+ COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'`
@@ -11118,7 +11116,7 @@
###############################################################################
-BOOT_JDK_FOUND=no
+ BOOT_JDK_FOUND=no
# Check whether --with-boot-jdk was given.
if test "${with_boot_jdk+set}" = set; then :
@@ -11126,22 +11124,22 @@
fi
-# We look for the Boot JDK through various means, going from more certain to
-# more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
-# we detected something (if so, the path to the jdk is in BOOT_JDK). But we
-# must check if this is indeed valid; otherwise we'll continue looking.
-
-# Test: Is bootjdk explicitely set by command line arguments?
+ # We look for the Boot JDK through various means, going from more certain to
+ # more of a guess-work. After each test, BOOT_JDK_FOUND is set to "yes" if
+ # we detected something (if so, the path to the jdk is in BOOT_JDK). But we
+ # must check if this is indeed valid; otherwise we'll continue looking.
+
+ # Test: Is bootjdk explicitely set by command line arguments?
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
-if test "x$with_boot_jdk" != x; then
+ if test "x$with_boot_jdk" != x; then
BOOT_JDK=$with_boot_jdk
BOOT_JDK_FOUND=maybe
{ $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using configure arguments" >&5
$as_echo "$as_me: Found potential Boot JDK using configure arguments" >&6;}
-fi
+ fi
# If previous step claimed to have found a JDK, check it to see if it seems to be valid.
@@ -11318,161 +11316,161 @@
fi # end check boot jdk found
fi
-if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
- # Having specified an argument which is incorrect will produce an instant failure;
- # we should not go on looking
- as_fn_error $? "The path given by --with-boot-jdk does not contain a valid Boot JDK" "$LINENO" 5
-fi
-
-# Test: Is bootjdk available from builddeps?
+ if test "x$with_boot_jdk" != x && test "x$BOOT_JDK_FOUND" = xno; then
+ # Having specified an argument which is incorrect will produce an instant failure;
+ # we should not go on looking
+ as_fn_error $? "The path given by --with-boot-jdk does not contain a valid Boot JDK" "$LINENO" 5
+ fi
+
+ # Test: Is bootjdk available from builddeps?
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_bootjdk_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The bootjdk comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_bootjdk}
- fi
- if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for bootjdk" >&5
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_bootjdk_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_bootjdk_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The bootjdk comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_bootjdk}
+ fi
+ if test "x$resource" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for bootjdk" >&5
$as_echo "$as_me: Using builddeps $resource for bootjdk" >&6;}
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
-
-# bootjdk is for example mymodule
-# $resource is for example libs/general/libmymod_1_2_3.zip
-# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
-# $with_builddeps_dir is for example /localhome/builddeps
-# depdir is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $resource`
- filebase=`echo $filename | sed 's/\.[^\.]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$with_builddeps_dir/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency bootjdk from $with_builddeps_server/$resource and installing into $installdir" >&5
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+
+ # bootjdk is for example mymodule
+ # $resource is for example libs/general/libmymod_1_2_3.zip
+ # $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $with_builddeps_dir is for example /localhome/builddeps
+ # depdir is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $resource`
+ filebase=`echo $filename | sed 's/\.[^\.]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$with_builddeps_dir/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency bootjdk from $with_builddeps_server/$resource and installing into $installdir" >&5
$as_echo "$as_me: Downloading build dependency bootjdk from $with_builddeps_server/$resource and installing into $installdir" >&6;}
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
- fi
- tmpfile=`mktemp $installdir/bootjdk.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
- fi
-
- # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
- # $tmpfile is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $tmpfile $with_builddeps_server/$resource
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
- fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
- FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $tmpfile" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
- fi
-
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
- ;;
- esac
- fi
- if test -f $installdir/$filename.unpacked; then
- depdir=$installdir
- fi
-
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_bootjdk_ROOT}
- thecflags=${builddep_bootjdk_CFLAGS}
- thelibs=${builddep_bootjdk_LIBS}
- if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency bootjdk" "$LINENO" 5
- fi
- BOOT_JDK=$depdir
- if test "x$theroot" != x; then
- BOOT_JDK="$theroot"
- fi
- if test "x$thecflags" != x; then
- BOOT_JDK_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- BOOT_JDK_LIBS="$thelibs"
- fi
- BOOT_JDK_FOUND=maybe
- else BOOT_JDK_FOUND=no
-
- fi
- else BOOT_JDK_FOUND=no
-
- fi
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
+ fi
+ tmpfile=`mktemp $installdir/bootjdk.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
+ fi
+
+ # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $tmpfile is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $tmpfile $with_builddeps_server/$resource
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
+ FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
+ fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $tmpfile" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
+ fi
+
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
+ fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ depdir=$installdir
+ fi
+
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_bootjdk_ROOT}
+ thecflags=${builddep_bootjdk_CFLAGS}
+ thelibs=${builddep_bootjdk_LIBS}
+ if test "x$depdir" = x; then
+ as_fn_error $? "Could not download build dependency bootjdk" "$LINENO" 5
+ fi
+ BOOT_JDK=$depdir
+ if test "x$theroot" != x; then
+ BOOT_JDK="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ BOOT_JDK_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ BOOT_JDK_LIBS="$thelibs"
+ fi
+ BOOT_JDK_FOUND=maybe
+ else BOOT_JDK_FOUND=no
+
+ fi
+ else BOOT_JDK_FOUND=no
+
+ fi
@@ -11651,13 +11649,13 @@
fi
-# Test: Is $JAVA_HOME set?
+ # Test: Is $JAVA_HOME set?
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
- if test "x$JAVA_HOME" != x; then
- JAVA_HOME_PROCESSED="$JAVA_HOME"
+ if test "x$JAVA_HOME" != x; then
+ JAVA_HOME_PROCESSED="$JAVA_HOME"
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -11780,18 +11778,18 @@
JAVA_HOME_PROCESSED="`cd "$path"; $THEPWDCMD -L`"
fi
- if test ! -d "$JAVA_HOME_PROCESSED"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your JAVA_HOME points to a non-existing directory!" >&5
+ if test ! -d "$JAVA_HOME_PROCESSED"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your JAVA_HOME points to a non-existing directory!" >&5
$as_echo "$as_me: Your JAVA_HOME points to a non-existing directory!" >&6;}
- else
- # Aha, the user has set a JAVA_HOME
- # let us use that as the Boot JDK.
- BOOT_JDK="$JAVA_HOME_PROCESSED"
- BOOT_JDK_FOUND=maybe
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using JAVA_HOME" >&5
+ else
+ # Aha, the user has set a JAVA_HOME
+ # let us use that as the Boot JDK.
+ BOOT_JDK="$JAVA_HOME_PROCESSED"
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using JAVA_HOME" >&5
$as_echo "$as_me: Found potential Boot JDK using JAVA_HOME" >&6;}
- fi
- fi
+ fi
+ fi
# If previous step claimed to have found a JDK, check it to see if it seems to be valid.
@@ -11969,17 +11967,17 @@
fi
-# Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
+ # Test: Is there a /usr/libexec/java_home? (Typically on MacOSX)
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
- if test -x /usr/libexec/java_home; then
- BOOT_JDK=`/usr/libexec/java_home`
- BOOT_JDK_FOUND=maybe
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using /usr/libexec/java_home" >&5
+ if test -x /usr/libexec/java_home; then
+ BOOT_JDK=`/usr/libexec/java_home`
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using /usr/libexec/java_home" >&5
$as_echo "$as_me: Found potential Boot JDK using /usr/libexec/java_home" >&6;}
- fi
+ fi
# If previous step claimed to have found a JDK, check it to see if it seems to be valid.
@@ -12157,12 +12155,12 @@
fi
-# Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
+ # Test: Is there a java or javac in the PATH, which is a symlink to the JDK?
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
- # Extract the first word of "javac", so it can be a program name with args.
+ # Extract the first word of "javac", so it can be a program name with args.
set dummy javac; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -12202,7 +12200,7 @@
fi
- # Extract the first word of "java", so it can be a program name with args.
+ # Extract the first word of "java", so it can be a program name with args.
set dummy java; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -12242,72 +12240,72 @@
fi
- BINARY="$JAVAC_CHECK"
- if test "x$JAVAC_CHECK" = x; then
- BINARY="$JAVA_CHECK"
- fi
- if test "x$BINARY" != x; then
- # So there is a java(c) binary, it might be part of a JDK.
- # Lets find the JDK/JRE directory by following symbolic links.
- # Linux/GNU systems often have links from /usr/bin/java to
- # /etc/alternatives/java to the real JDK binary.
-
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- BINARY=`$READLINK -f $BINARY`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $BINARY`
- sym_link_file=`$BASENAME $BINARY`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- BINARY=$sym_link_dir/$sym_link_file
- fi
- fi
-
- BOOT_JDK=`dirname "$BINARY"`
- BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
- if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
- # Looks like we found ourselves an JDK
- BOOT_JDK_FOUND=maybe
- { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using java(c) in PATH" >&5
+ BINARY="$JAVAC_CHECK"
+ if test "x$JAVAC_CHECK" = x; then
+ BINARY="$JAVA_CHECK"
+ fi
+ if test "x$BINARY" != x; then
+ # So there is a java(c) binary, it might be part of a JDK.
+ # Lets find the JDK/JRE directory by following symbolic links.
+ # Linux/GNU systems often have links from /usr/bin/java to
+ # /etc/alternatives/java to the real JDK binary.
+
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ BINARY=`$READLINK -f $BINARY`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $BINARY`
+ sym_link_file=`$BASENAME $BINARY`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ BINARY=$sym_link_dir/$sym_link_file
+ fi
+ fi
+
+ BOOT_JDK=`dirname "$BINARY"`
+ BOOT_JDK=`cd "$BOOT_JDK/.."; pwd`
+ if test -x "$BOOT_JDK/bin/javac" && test -x "$BOOT_JDK/bin/java"; then
+ # Looks like we found ourselves an JDK
+ BOOT_JDK_FOUND=maybe
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Found potential Boot JDK using java(c) in PATH" >&5
$as_echo "$as_me: Found potential Boot JDK using java(c) in PATH" >&6;}
- fi
- fi
+ fi
+ fi
# If previous step claimed to have found a JDK, check it to see if it seems to be valid.
@@ -12485,7 +12483,7 @@
fi
-# Test: Is there a JDK installed in default, well-known locations?
+ # Test: Is there a JDK installed in default, well-known locations?
if test "x$BOOT_JDK_FOUND" = xno; then
# Now execute the test
@@ -15715,67 +15713,67 @@
fi
-# If we haven't found anything yet, we've truly lost. Give up.
-if test "x$BOOT_JDK_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # openjdk is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=openjdk
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ # If we haven't found anything yet, we've truly lost. Give up.
+ if test "x$BOOT_JDK_FOUND" = xno; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # openjdk is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=openjdk
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a valid Boot JDK. $HELP_MSG" >&5
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find a valid Boot JDK. $HELP_MSG" >&5
$as_echo "$as_me: Could not find a valid Boot JDK. $HELP_MSG" >&6;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
-fi
-
-# Setup proper paths for what we found
-BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
-if test ! -f "$BOOT_RTJAR"; then
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
+
+ # Setup proper paths for what we found
+ BOOT_RTJAR="$BOOT_JDK/jre/lib/rt.jar"
+ if test ! -f "$BOOT_RTJAR"; then
# On MacOSX it is called classes.jar
BOOT_RTJAR="$BOOT_JDK/../Classes/classes.jar"
if test -f "$BOOT_RTJAR"; then
# Remove the ..
BOOT_RTJAR="`cd ${BOOT_RTJAR%/*} && pwd`/${BOOT_RTJAR##*/}"
fi
-fi
-BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
-BOOT_JDK="$BOOT_JDK"
-
-
-
-
-# Setup tools from the Boot JDK.
+ fi
+ BOOT_TOOLSJAR="$BOOT_JDK/lib/tools.jar"
+ BOOT_JDK="$BOOT_JDK"
+
+
+
+
+ # Setup tools from the Boot JDK.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for java in Boot JDK" >&5
$as_echo_n "checking for java in Boot JDK... " >&6; }
JAVA=$BOOT_JDK/bin/java
if test ! -x $JAVA; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find java in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find java in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15785,11 +15783,11 @@
$as_echo_n "checking for javac in Boot JDK... " >&6; }
JAVAC=$BOOT_JDK/bin/javac
if test ! -x $JAVAC; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find javac in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find javac in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15799,11 +15797,11 @@
$as_echo_n "checking for javah in Boot JDK... " >&6; }
JAVAH=$BOOT_JDK/bin/javah
if test ! -x $JAVAH; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find javah in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find javah in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15813,11 +15811,11 @@
$as_echo_n "checking for javap in Boot JDK... " >&6; }
JAVAP=$BOOT_JDK/bin/javap
if test ! -x $JAVAP; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find javap in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find javap in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15827,11 +15825,11 @@
$as_echo_n "checking for jar in Boot JDK... " >&6; }
JAR=$BOOT_JDK/bin/jar
if test ! -x $JAR; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find jar in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find jar in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15841,11 +15839,11 @@
$as_echo_n "checking for rmic in Boot JDK... " >&6; }
RMIC=$BOOT_JDK/bin/rmic
if test ! -x $RMIC; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find rmic in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find rmic in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
@@ -15855,28 +15853,28 @@
$as_echo_n "checking for native2ascii in Boot JDK... " >&6; }
NATIVE2ASCII=$BOOT_JDK/bin/native2ascii
if test ! -x $NATIVE2ASCII; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: not found" >&5
$as_echo "not found" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&5
$as_echo "$as_me: Your Boot JDK seems broken. This might be fixed by explicitely setting --with-boot-jdk" >&6;}
- as_fn_error $? "Could not find native2ascii in the Boot JDK" "$LINENO" 5
+ as_fn_error $? "Could not find native2ascii in the Boot JDK" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
$as_echo "ok" >&6; }
-# Finally, set some other options...
-
-# When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
-BOOT_JDK_SOURCETARGET="-source 7 -target 7"
-
-
-
-
-##############################################################################
-#
-# Specify options for anything that is run with the Boot JDK.
-#
+ # Finally, set some other options...
+
+ # When compiling code to be executed by the Boot JDK, force jdk7 compatibility.
+ BOOT_JDK_SOURCETARGET="-source 7 -target 7"
+
+
+
+
+ ##############################################################################
+ #
+ # Specify options for anything that is run with the Boot JDK.
+ #
# Check whether --with-boot-jdk-jvmargs was given.
if test "${with_boot_jdk_jvmargs+set}" = set; then :
@@ -15884,135 +15882,135 @@
fi
-if test "x$with_boot_jdk_jvmargs" = x; then
+ if test "x$with_boot_jdk_jvmargs" = x; then
# Not all JVM:s accept the same arguments on the command line.
# OpenJDK specific increase in thread stack for JDK build,
# well more specifically, when running javac.
if test "x$BUILD_NUM_BITS" = x32; then
- STACK_SIZE=768
- else
- # Running Javac on a JVM on a 64-bit machine, the stack takes more space
- # since 64-bit pointers are pushed on the stach. Apparently, we need
- # to increase the stack space when javacing the JDK....
- STACK_SIZE=1536
+ STACK_SIZE=768
+ else
+ # Running Javac on a JVM on a 64-bit machine, the stack takes more space
+ # since 64-bit pointers are pushed on the stach. Apparently, we need
+ # to increase the stack space when javacing the JDK....
+ STACK_SIZE=1536
fi
# Minimum amount of heap memory.
- $ECHO "Check if jvm arg is ok: -Xms64M" >&5
- $ECHO "Command: $JAVA -Xms64M -version" >&5
- OUTPUT=`$JAVA -Xms64M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -Xms64M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -Xms64M" >&5
+ $ECHO "Command: $JAVA -Xms64M -version" >&5
+ OUTPUT=`$JAVA -Xms64M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -Xms64M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- # Why does macosx need more heap? Its the huge JDK batch.
-
- $ECHO "Check if jvm arg is ok: -Xmx1600M" >&5
- $ECHO "Command: $JAVA -Xmx1600M -version" >&5
- OUTPUT=`$JAVA -Xmx1600M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1600M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
- else
-
- $ECHO "Check if jvm arg is ok: -Xmx1100M" >&5
- $ECHO "Command: $JAVA -Xmx1100M -version" >&5
- OUTPUT=`$JAVA -Xmx1100M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1100M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ # Why does macosx need more heap? Its the huge JDK batch.
+
+ $ECHO "Check if jvm arg is ok: -Xmx1600M" >&5
+ $ECHO "Command: $JAVA -Xmx1600M -version" >&5
+ OUTPUT=`$JAVA -Xmx1600M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1600M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ else
+
+ $ECHO "Check if jvm arg is ok: -Xmx1100M" >&5
+ $ECHO "Command: $JAVA -Xmx1100M -version" >&5
+ OUTPUT=`$JAVA -Xmx1100M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -Xmx1100M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
fi
# When is adding -client something that speeds up the JVM?
# ADD_JVM_ARG_IF_OK([-client],boot_jdk_jvmargs,[$JAVA])
- $ECHO "Check if jvm arg is ok: -XX:PermSize=32m" >&5
- $ECHO "Command: $JAVA -XX:PermSize=32m -version" >&5
- OUTPUT=`$JAVA -XX:PermSize=32m -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:PermSize=32m"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -XX:MaxPermSize=160m" >&5
- $ECHO "Command: $JAVA -XX:MaxPermSize=160m -version" >&5
- OUTPUT=`$JAVA -XX:MaxPermSize=160m -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:MaxPermSize=160m"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-
- $ECHO "Check if jvm arg is ok: -XX:ThreadStackSize=$STACK_SIZE" >&5
- $ECHO "Command: $JAVA -XX:ThreadStackSize=$STACK_SIZE -version" >&5
- OUTPUT=`$JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:ThreadStackSize=$STACK_SIZE"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -XX:PermSize=32m" >&5
+ $ECHO "Command: $JAVA -XX:PermSize=32m -version" >&5
+ OUTPUT=`$JAVA -XX:PermSize=32m -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:PermSize=32m"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+
+ $ECHO "Check if jvm arg is ok: -XX:MaxPermSize=160m" >&5
+ $ECHO "Command: $JAVA -XX:MaxPermSize=160m -version" >&5
+ OUTPUT=`$JAVA -XX:MaxPermSize=160m -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:MaxPermSize=160m"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+
+ $ECHO "Check if jvm arg is ok: -XX:ThreadStackSize=$STACK_SIZE" >&5
+ $ECHO "Command: $JAVA -XX:ThreadStackSize=$STACK_SIZE -version" >&5
+ OUTPUT=`$JAVA -XX:ThreadStackSize=$STACK_SIZE -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:ThreadStackSize=$STACK_SIZE"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
# Disable special log output when a debug build is used as Boot JDK...
- $ECHO "Check if jvm arg is ok: -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput" >&5
- $ECHO "Command: $JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version" >&5
- OUTPUT=`$JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-fi
-
-BOOT_JDK_JVMARGS=$boot_jdk_jvmargs
+ $ECHO "Check if jvm arg is ok: -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput" >&5
+ $ECHO "Command: $JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version" >&5
+ OUTPUT=`$JAVA -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ boot_jdk_jvmargs="$boot_jdk_jvmargs -XX:-PrintVMOptions -XX:-UnlockDiagnosticVMOptions -XX:-LogVMOutput"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ fi
+
+ BOOT_JDK_JVMARGS=$boot_jdk_jvmargs
@@ -16023,31 +16021,30 @@
###############################################################################
-
-# Where are the sources. Any of these can be overridden
-# using --with-override-corba and the likes.
-LANGTOOLS_TOPDIR="$SRC_ROOT/langtools"
-CORBA_TOPDIR="$SRC_ROOT/corba"
-JAXP_TOPDIR="$SRC_ROOT/jaxp"
-JAXWS_TOPDIR="$SRC_ROOT/jaxws"
-HOTSPOT_TOPDIR="$SRC_ROOT/hotspot"
-NASHORN_TOPDIR="$SRC_ROOT/nashorn"
-JDK_TOPDIR="$SRC_ROOT/jdk"
-
-
-
-
-
-
-
-
-
-
-###############################################################################
-#
-# Pickup additional source for a component from outside of the source root
-# or override source for a component.
-#
+ # Where are the sources. Any of these can be overridden
+ # using --with-override-corba and the likes.
+ LANGTOOLS_TOPDIR="$SRC_ROOT/langtools"
+ CORBA_TOPDIR="$SRC_ROOT/corba"
+ JAXP_TOPDIR="$SRC_ROOT/jaxp"
+ JAXWS_TOPDIR="$SRC_ROOT/jaxws"
+ HOTSPOT_TOPDIR="$SRC_ROOT/hotspot"
+ NASHORN_TOPDIR="$SRC_ROOT/nashorn"
+ JDK_TOPDIR="$SRC_ROOT/jdk"
+
+
+
+
+
+
+
+
+
+
+ ###############################################################################
+ #
+ # Pickup additional source for a component from outside of the source root
+ # or override source for a component.
+ #
# Check whether --with-add-source-root was given.
if test "${with_add_source_root+set}" = set; then :
@@ -16069,14 +16066,14 @@
fi
-if test "x$with_adds_and_overrides" != x; then
+ if test "x$with_adds_and_overrides" != x; then
with_add_source_root="$with_adds_and_overrides/adds"
with_override_source_root="$with_adds_and_overrides/overrides"
-fi
-
-if test "x$with_add_source_root" != x; then
+ fi
+
+ if test "x$with_add_source_root" != x; then
if ! test -d $with_add_source_root; then
- as_fn_error $? "Trying to use a non-existant add-source-root $with_add_source_root" "$LINENO" 5
+ as_fn_error $? "Trying to use a non-existant add-source-root $with_add_source_root" "$LINENO" 5
fi
CURDIR="$PWD"
cd "$with_add_source_root"
@@ -16085,93 +16082,93 @@
# Verify that the addon source root does not have any root makefiles.
# If it does, then it is usually an error, prevent this.
if test -f $with_add_source_root/langtools/makefiles/Makefile || \
- test -f $with_add_source_root/langtools/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/langtools/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/corba/makefiles/Makefile || \
- test -f $with_add_source_root/corba/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full corba repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/corba/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full corba repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/jaxp/makefiles/Makefile || \
- test -f $with_add_source_root/jaxp/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/jaxp/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/jaxws/makefiles/Makefile || \
- test -f $with_add_source_root/jaxws/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/jaxws/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/hotspot/makefiles/Makefile || \
- test -f $with_add_source_root/hotspot/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/hotspot/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/nashorn/makefiles/Makefile || \
- test -f $with_add_source_root/nashorn/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full nashorn repo! An add source root should only contain additional sources." "$LINENO" 5
+ test -f $with_add_source_root/nashorn/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full nashorn repo! An add source root should only contain additional sources." "$LINENO" 5
fi
if test -f $with_add_source_root/jdk/makefiles/Makefile || \
- test -f $with_add_source_root/jdk/make/Makefile; then
- as_fn_error $? "Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources." "$LINENO" 5
- fi
-fi
-
-
-if test "x$with_override_source_root" != x; then
+ test -f $with_add_source_root/jdk/make/Makefile; then
+ as_fn_error $? "Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources." "$LINENO" 5
+ fi
+ fi
+
+
+ if test "x$with_override_source_root" != x; then
if ! test -d $with_override_source_root; then
- as_fn_error $? "Trying to use a non-existant override-source-root $with_override_source_root" "$LINENO" 5
+ as_fn_error $? "Trying to use a non-existant override-source-root $with_override_source_root" "$LINENO" 5
fi
CURDIR="$PWD"
cd "$with_override_source_root"
OVERRIDE_SRC_ROOT="`pwd`"
cd "$CURDIR"
if test -f $with_override_source_root/langtools/makefiles/Makefile || \
- test -f $with_override_source_root/langtools/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/langtools/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/corba/makefiles/Makefile || \
- test -f $with_override_source_root/corba/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full corba repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/corba/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full corba repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/jaxp/makefiles/Makefile || \
- test -f $with_override_source_root/jaxp/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/jaxp/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/jaxws/makefiles/Makefile || \
- test -f $with_override_source_root/jaxws/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/jaxws/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/hotspot/makefiles/Makefile || \
- test -f $with_override_source_root/hotspot/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/hotspot/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/nashorn/makefiles/Makefile || \
- test -f $with_override_source_root/nashorn/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full nashorn repo! An override source root should only contain sources that override." "$LINENO" 5
+ test -f $with_override_source_root/nashorn/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full nashorn repo! An override source root should only contain sources that override." "$LINENO" 5
fi
if test -f $with_override_source_root/jdk/makefiles/Makefile || \
- test -f $with_override_source_root/jdk/make/Makefile; then
- as_fn_error $? "Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override." "$LINENO" 5
- fi
-fi
-
-
-###############################################################################
-#
-# Override a repo completely, this is used for example when you have 3 small
-# development sandboxes of the langtools sources and want to avoid having 3 full
-# OpenJDK sources checked out on disk.
-#
-# Assuming that the 3 langtools sandboxes are located here:
-# /home/fredrik/sandbox1/langtools
-# /home/fredrik/sandbox2/langtools
-# /home/fredrik/sandbox3/langtools
-#
-# From the source root you create build subdirs manually:
-# mkdir -p build1 build2 build3
-# in each build directory run:
-# (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make)
-# (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make)
-# (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make)
-#
+ test -f $with_override_source_root/jdk/make/Makefile; then
+ as_fn_error $? "Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override." "$LINENO" 5
+ fi
+ fi
+
+
+ ###############################################################################
+ #
+ # Override a repo completely, this is used for example when you have 3 small
+ # development sandboxes of the langtools sources and want to avoid having 3 full
+ # OpenJDK sources checked out on disk.
+ #
+ # Assuming that the 3 langtools sandboxes are located here:
+ # /home/fredrik/sandbox1/langtools
+ # /home/fredrik/sandbox2/langtools
+ # /home/fredrik/sandbox3/langtools
+ #
+ # From the source root you create build subdirs manually:
+ # mkdir -p build1 build2 build3
+ # in each build directory run:
+ # (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make)
+ # (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make)
+ # (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make)
+ #
# Check whether --with-override-langtools was given.
@@ -16222,106 +16219,105 @@
fi
-if test "x$with_override_langtools" != x; then
+ if test "x$with_override_langtools" != x; then
CURDIR="$PWD"
cd "$with_override_langtools"
LANGTOOLS_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $LANGTOOLS_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override langtools with a full langtools repo!" "$LINENO" 5
+ as_fn_error $? "You have to override langtools with a full langtools repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if langtools should be overridden" >&5
$as_echo_n "checking if langtools should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $LANGTOOLS_TOPDIR" >&5
$as_echo "yes with $LANGTOOLS_TOPDIR" >&6; }
-fi
-if test "x$with_override_corba" != x; then
+ fi
+ if test "x$with_override_corba" != x; then
CURDIR="$PWD"
cd "$with_override_corba"
CORBA_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $CORBA_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override corba with a full corba repo!" "$LINENO" 5
+ as_fn_error $? "You have to override corba with a full corba repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if corba should be overridden" >&5
$as_echo_n "checking if corba should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $CORBA_TOPDIR" >&5
$as_echo "yes with $CORBA_TOPDIR" >&6; }
-fi
-if test "x$with_override_jaxp" != x; then
+ fi
+ if test "x$with_override_jaxp" != x; then
CURDIR="$PWD"
cd "$with_override_jaxp"
JAXP_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JAXP_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override jaxp with a full jaxp repo!" "$LINENO" 5
+ as_fn_error $? "You have to override jaxp with a full jaxp repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if jaxp should be overridden" >&5
$as_echo_n "checking if jaxp should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JAXP_TOPDIR" >&5
$as_echo "yes with $JAXP_TOPDIR" >&6; }
-fi
-if test "x$with_override_jaxws" != x; then
+ fi
+ if test "x$with_override_jaxws" != x; then
CURDIR="$PWD"
cd "$with_override_jaxws"
JAXWS_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JAXWS_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override jaxws with a full jaxws repo!" "$LINENO" 5
+ as_fn_error $? "You have to override jaxws with a full jaxws repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if jaxws should be overridden" >&5
$as_echo_n "checking if jaxws should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JAXWS_TOPDIR" >&5
$as_echo "yes with $JAXWS_TOPDIR" >&6; }
-fi
-if test "x$with_override_hotspot" != x; then
+ fi
+ if test "x$with_override_hotspot" != x; then
CURDIR="$PWD"
cd "$with_override_hotspot"
HOTSPOT_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $HOTSPOT_TOPDIR/make/Makefile && \
- ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override hotspot with a full hotspot repo!" "$LINENO" 5
+ ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then
+ as_fn_error $? "You have to override hotspot with a full hotspot repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if hotspot should be overridden" >&5
$as_echo_n "checking if hotspot should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $HOTSPOT_TOPDIR" >&5
$as_echo "yes with $HOTSPOT_TOPDIR" >&6; }
-fi
-if test "x$with_override_nashorn" != x; then
+ fi
+ if test "x$with_override_nashorn" != x; then
CURDIR="$PWD"
cd "$with_override_nashorn"
NASHORN_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $NASHORN_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override nashorn with a full nashorn repo!" "$LINENO" 5
+ as_fn_error $? "You have to override nashorn with a full nashorn repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if nashorn should be overridden" >&5
$as_echo_n "checking if nashorn should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $NASHORN_TOPDIR" >&5
$as_echo "yes with $NASHORN_TOPDIR" >&6; }
-fi
-if test "x$with_override_jdk" != x; then
+ fi
+ if test "x$with_override_jdk" != x; then
CURDIR="$PWD"
cd "$with_override_jdk"
JDK_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JDK_TOPDIR/makefiles/Makefile; then
- as_fn_error $? "You have to override JDK with a full JDK repo!" "$LINENO" 5
+ as_fn_error $? "You have to override JDK with a full JDK repo!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if JDK should be overridden" >&5
$as_echo_n "checking if JDK should be overridden... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes with $JDK_TOPDIR" >&5
$as_echo "yes with $JDK_TOPDIR" >&6; }
-fi
-
-
-
-BUILD_OUTPUT="$OUTPUT_ROOT"
-
-
-HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
-BUILD_HOTSPOT=true
+ fi
+
+
+ BUILD_OUTPUT="$OUTPUT_ROOT"
+
+
+ HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
+ BUILD_HOTSPOT=true
@@ -16330,22 +16326,22 @@
withval=$with_import_hotspot;
fi
-if test "x$with_import_hotspot" != x; then
+ if test "x$with_import_hotspot" != x; then
CURDIR="$PWD"
cd "$with_import_hotspot"
HOTSPOT_DIST="`pwd`"
cd "$CURDIR"
if ! (test -d $HOTSPOT_DIST/lib && test -d $HOTSPOT_DIST/jre/lib); then
- as_fn_error $? "You have to import hotspot from a full jdk image or hotspot build dist dir!" "$LINENO" 5
+ as_fn_error $? "You have to import hotspot from a full jdk image or hotspot build dist dir!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if hotspot should be imported" >&5
$as_echo_n "checking if hotspot should be imported... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes from $HOTSPOT_DIST" >&5
$as_echo "yes from $HOTSPOT_DIST" >&6; }
BUILD_HOTSPOT=false
-fi
-
-JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
+ fi
+
+ JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
###############################################################################
@@ -16356,26 +16352,26 @@
###############################################################################
-###############################################################################
-#
-# Configure the development tool paths and potential sysroot.
-#
-ac_ext=cpp
+ ###############################################################################
+ #
+ # Configure the development tool paths and potential sysroot.
+ #
+ ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-# The option used to specify the target .o,.a or .so file.
-# When compiling, how to specify the to be created object file.
-CC_OUT_OPTION='-o$(SPACE)'
-# When linking, how to specify the to be created executable.
-EXE_OUT_OPTION='-o$(SPACE)'
-# When linking, how to specify the to be created dynamically linkable library.
-LD_OUT_OPTION='-o$(SPACE)'
-# When archiving, how to specify the to be create static archive for object files.
-AR_OUT_OPTION='rcs$(SPACE)'
+ # The option used to specify the target .o,.a or .so file.
+ # When compiling, how to specify the to be created object file.
+ CC_OUT_OPTION='-o$(SPACE)'
+ # When linking, how to specify the to be created executable.
+ EXE_OUT_OPTION='-o$(SPACE)'
+ # When linking, how to specify the to be created dynamically linkable library.
+ LD_OUT_OPTION='-o$(SPACE)'
+ # When archiving, how to specify the to be create static archive for object files.
+ AR_OUT_OPTION='rcs$(SPACE)'
@@ -16544,7 +16540,7 @@
else
# try to find jtreg on path
- for ac_prog in jtreg
+ for ac_prog in jtreg
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
@@ -16590,16 +16586,16 @@
done
- if test "x$JTREGEXE" = x; then
- if test "xjtreg" = x; then
- PROG_NAME=jtregexe
- else
- PROG_NAME=jtreg
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
-$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
- as_fn_error $? "Cannot continue" "$LINENO" 5
- fi
+ if test "x$JTREGEXE" = x; then
+ if test "xjtreg" = x; then
+ PROG_NAME=jtregexe
+ else
+ PROG_NAME=jtreg
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $PROG_NAME!" >&5
+$as_echo "$as_me: Could not find $PROG_NAME!" >&6;}
+ as_fn_error $? "Cannot continue" "$LINENO" 5
+ fi
JT_HOME="`$DIRNAME $JTREGEXE`"
@@ -16610,7 +16606,7 @@
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
# Store path to cygwin link.exe to help excluding it when searching for
# VS linker. This must be done before changing the PATH when looking for VS.
@@ -17065,8 +17061,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -17081,8 +17077,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -17110,9 +17106,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$new_path\", is invalid." >&6;}
@@ -17288,29 +17284,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of VS_ENV_CMD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of VS_ENV_CMD" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- VS_ENV_CMD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting VS_ENV_CMD to \"$new_complete\"" >&5
+ VS_ENV_CMD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting VS_ENV_CMD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting VS_ENV_CMD to \"$new_complete\"" >&6;}
- fi
+ fi
# Lets extract the variables that are set by vcvarsall.bat/vsvars32.bat/vsvars64.bat
@@ -17626,21 +17622,21 @@
fi
-fi
-
-
-
-# If --build AND --host is set, then the configure script will find any
-# cross compilation tools in the PATH. Cross compilation tools
-# follows the cross compilation standard where they are prefixed with ${host}.
-# For example the binary i686-sun-solaris2.10-gcc
-# will cross compile for i686-sun-solaris2.10
-# If neither of build and host is not set, then build=host and the
-# default compiler found in the path will be used.
-# Setting only --host, does not seem to be really supported.
-# Please set both --build and --host if you want to cross compile.
-
-if test "x$COMPILE_TYPE" = "xcross"; then
+ fi
+
+
+
+ # If --build AND --host is set, then the configure script will find any
+ # cross compilation tools in the PATH. Cross compilation tools
+ # follows the cross compilation standard where they are prefixed with ${host}.
+ # For example the binary i686-sun-solaris2.10-gcc
+ # will cross compile for i686-sun-solaris2.10
+ # If neither of build and host is not set, then build=host and the
+ # default compiler found in the path will be used.
+ # Setting only --host, does not seem to be really supported.
+ # Please set both --build and --host if you want to cross compile.
+
+ if test "x$COMPILE_TYPE" = "xcross"; then
# Now we to find a C/C++ compiler that can build executables for the build
# platform. We can't use the AC_PROG_CC macro, since it can only be used
# once. Also, we need to do this before adding a tools dir to the path,
@@ -17711,8 +17707,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -17727,8 +17723,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -17756,9 +17752,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$new_path\", is invalid." >&6;}
@@ -17934,29 +17930,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_CC" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CC to \"$new_complete\"" >&5
+ BUILD_CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_CC to \"$new_complete\"" >&6;}
- fi
+ fi
for ac_prog in cl CC g++
do
@@ -18022,8 +18018,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18038,8 +18034,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18067,9 +18063,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$new_path\", is invalid." >&6;}
@@ -18245,29 +18241,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_CXX" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CXX to \"$new_complete\"" >&5
+ BUILD_CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_CXX to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
@@ -18328,8 +18324,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18344,8 +18340,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18373,9 +18369,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$new_path\", is invalid." >&6;}
@@ -18551,219 +18547,220 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of BUILD_LD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of BUILD_LD" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- BUILD_LD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_LD to \"$new_complete\"" >&5
+ BUILD_LD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting BUILD_LD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting BUILD_LD to \"$new_complete\"" >&6;}
- fi
-
-fi
-
-
-
-
-# If a devkit is found on the builddeps server, then prepend its path to the
-# PATH variable. If there are cross compilers available in the devkit, these
-# will be found by AC_PROG_CC et al.
-DEVKIT=
-
-
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_devkit_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The devkit comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_devkit}
- fi
- if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for devkit" >&5
+ fi
+
+ fi
+
+
+
+
+ # If a devkit is found on the builddeps server, then prepend its path to the
+ # PATH variable. If there are cross compilers available in the devkit, these
+ # will be found by AC_PROG_CC et al.
+ DEVKIT=
+
+
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_devkit_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_devkit_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The devkit comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_devkit}
+ fi
+ if test "x$resource" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for devkit" >&5
$as_echo "$as_me: Using builddeps $resource for devkit" >&6;}
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
-
-# devkit is for example mymodule
-# $resource is for example libs/general/libmymod_1_2_3.zip
-# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
-# $with_builddeps_dir is for example /localhome/builddeps
-# depdir is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $resource`
- filebase=`echo $filename | sed 's/\.[^\.]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$with_builddeps_dir/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency devkit from $with_builddeps_server/$resource and installing into $installdir" >&5
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+
+ # devkit is for example mymodule
+ # $resource is for example libs/general/libmymod_1_2_3.zip
+ # $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $with_builddeps_dir is for example /localhome/builddeps
+ # depdir is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $resource`
+ filebase=`echo $filename | sed 's/\.[^\.]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$with_builddeps_dir/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency devkit from $with_builddeps_server/$resource and installing into $installdir" >&5
$as_echo "$as_me: Downloading build dependency devkit from $with_builddeps_server/$resource and installing into $installdir" >&6;}
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
- fi
- tmpfile=`mktemp $installdir/devkit.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
- fi
-
- # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
- # $tmpfile is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $tmpfile $with_builddeps_server/$resource
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
- fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
- FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $tmpfile" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
- fi
-
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
- ;;
- esac
- fi
- if test -f $installdir/$filename.unpacked; then
- depdir=$installdir
- fi
-
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_devkit_ROOT}
- thecflags=${builddep_devkit_CFLAGS}
- thelibs=${builddep_devkit_LIBS}
- if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency devkit" "$LINENO" 5
- fi
- DEVKIT=$depdir
- if test "x$theroot" != x; then
- DEVKIT="$theroot"
- fi
- if test "x$thecflags" != x; then
- DEVKIT_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- DEVKIT_LIBS="$thelibs"
- fi
- # Found devkit
- PATH="$DEVKIT/bin:$PATH"
- SYS_ROOT="$DEVKIT/${rewritten_target}/sys-root"
- if test "x$x_includes" = "xNONE"; then
- x_includes="$SYS_ROOT/usr/include/X11"
- fi
- if test "x$x_libraries" = "xNONE"; then
- x_libraries="$SYS_ROOT/usr/lib"
- fi
-
-
- fi
-
- fi
-
-
-# Store the CFLAGS etal passed to the configure script.
-ORG_CFLAGS="$CFLAGS"
-ORG_CXXFLAGS="$CXXFLAGS"
-ORG_OBJCFLAGS="$OBJCFLAGS"
-
-# autoconf magic only relies on PATH, so update it if tools dir is specified
-OLD_PATH="$PATH"
-if test "x$TOOLS_DIR" != x; then
- PATH=$TOOLS_DIR:$PATH
-fi
-
-
-### Locate C compiler (CC)
-
-# On windows, only cl.exe is supported.
-# On Solaris, cc is preferred to gcc.
-# Elsewhere, gcc is preferred to cc.
-
-if test "x$CC" != x; then
- COMPILER_CHECK_LIST="$CC"
-elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- COMPILER_CHECK_LIST="cl"
-elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- COMPILER_CHECK_LIST="cc gcc"
-else
- COMPILER_CHECK_LIST="gcc cc"
-fi
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
+ fi
+ tmpfile=`mktemp $installdir/devkit.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
+ fi
+
+ # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $tmpfile is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $tmpfile $with_builddeps_server/$resource
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
+ FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
+ fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $tmpfile" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
+ fi
+
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
+ fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ depdir=$installdir
+ fi
+
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_devkit_ROOT}
+ thecflags=${builddep_devkit_CFLAGS}
+ thelibs=${builddep_devkit_LIBS}
+ if test "x$depdir" = x; then
+ as_fn_error $? "Could not download build dependency devkit" "$LINENO" 5
+ fi
+ DEVKIT=$depdir
+ if test "x$theroot" != x; then
+ DEVKIT="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ DEVKIT_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ DEVKIT_LIBS="$thelibs"
+ fi
+
+ # Found devkit
+ PATH="$DEVKIT/bin:$PATH"
+ SYS_ROOT="$DEVKIT/${rewritten_target}/sys-root"
+ if test "x$x_includes" = "xNONE"; then
+ x_includes="$SYS_ROOT/usr/include/X11"
+ fi
+ if test "x$x_libraries" = "xNONE"; then
+ x_libraries="$SYS_ROOT/usr/lib"
+ fi
+
+
+ fi
+
+ fi
+
+
+ # Store the CFLAGS etal passed to the configure script.
+ ORG_CFLAGS="$CFLAGS"
+ ORG_CXXFLAGS="$CXXFLAGS"
+ ORG_OBJCFLAGS="$OBJCFLAGS"
+
+ # autoconf magic only relies on PATH, so update it if tools dir is specified
+ OLD_PATH="$PATH"
+ if test "x$TOOLS_DIR" != x; then
+ PATH=$TOOLS_DIR:$PATH
+ fi
+
+
+ ### Locate C compiler (CC)
+
+ # On windows, only cl.exe is supported.
+ # On Solaris, cc is preferred to gcc.
+ # Elsewhere, gcc is preferred to cc.
+
+ if test "x$CC" != x; then
+ COMPILER_CHECK_LIST="$CC"
+ elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ COMPILER_CHECK_LIST="cl"
+ elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ COMPILER_CHECK_LIST="cc gcc"
+ else
+ COMPILER_CHECK_LIST="gcc cc"
+ fi
COMPILER_NAME=C
@@ -18876,31 +18873,31 @@
if test "x$CC" = x; then
- # Print a helpful message on how to acquire the necessary build dependency.
- # devkit is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=devkit
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # devkit is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=devkit
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
fi
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -18921,8 +18918,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18937,8 +18934,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -18966,9 +18963,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of CC, which resolves as \"$new_path\", is invalid." >&6;}
@@ -19144,80 +19141,80 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of CC" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CC to \"$new_complete\"" >&5
+ CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CC to \"$new_complete\"" >&6;}
- fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CC" >&5
$as_echo_n "checking resolved symbolic links for CC... " >&6; }
TEST_COMPILER="$CC"
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- TEST_COMPILER=`$READLINK -f $TEST_COMPILER`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $TEST_COMPILER`
- sym_link_file=`$BASENAME $TEST_COMPILER`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- TEST_COMPILER=$sym_link_dir/$sym_link_file
- fi
- fi
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ TEST_COMPILER=`$READLINK -f $TEST_COMPILER`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $TEST_COMPILER`
+ sym_link_file=`$BASENAME $TEST_COMPILER`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ TEST_COMPILER=$sym_link_dir/$sym_link_file
+ fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEST_COMPILER" >&5
$as_echo "$TEST_COMPILER" >&6; }
@@ -19357,8 +19354,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -19373,8 +19370,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -19402,9 +19399,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CC, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CC, which resolves as \"$new_path\", is invalid." >&6;}
@@ -19580,81 +19577,81 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CC, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CC" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- PROPER_COMPILER_CC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&5
+ PROPER_COMPILER_CC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting PROPER_COMPILER_CC to \"$new_complete\"" >&6;}
- fi
+ fi
PATH="$RETRY_COMPILER_SAVED_PATH"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for resolved symbolic links for CC" >&5
$as_echo_n "checking for resolved symbolic links for CC... " >&6; }
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- PROPER_COMPILER_CC=`$READLINK -f $PROPER_COMPILER_CC`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $PROPER_COMPILER_CC`
- sym_link_file=`$BASENAME $PROPER_COMPILER_CC`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- PROPER_COMPILER_CC=$sym_link_dir/$sym_link_file
- fi
- fi
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ PROPER_COMPILER_CC=`$READLINK -f $PROPER_COMPILER_CC`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $PROPER_COMPILER_CC`
+ sym_link_file=`$BASENAME $PROPER_COMPILER_CC`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ PROPER_COMPILER_CC=$sym_link_dir/$sym_link_file
+ fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PROPER_COMPILER_CC" >&5
$as_echo "$PROPER_COMPILER_CC" >&6; }
@@ -19726,8 +19723,8 @@
$as_echo "$as_me: Using $COMPILER_VENDOR $COMPILER_NAME compiler version $COMPILER_VERSION (located at $COMPILER)" >&6;}
-# Now that we have resolved CC ourself, let autoconf have its go at it
-ac_ext=c
+ # Now that we have resolved CC ourself, let autoconf have its go at it
+ ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -20325,17 +20322,17 @@
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-### Locate C++ compiler (CXX)
-
-if test "x$CXX" != x; then
- COMPILER_CHECK_LIST="$CXX"
-elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- COMPILER_CHECK_LIST="cl"
-elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- COMPILER_CHECK_LIST="CC g++"
-else
- COMPILER_CHECK_LIST="g++ CC"
-fi
+ ### Locate C++ compiler (CXX)
+
+ if test "x$CXX" != x; then
+ COMPILER_CHECK_LIST="$CXX"
+ elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ COMPILER_CHECK_LIST="cl"
+ elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ COMPILER_CHECK_LIST="CC g++"
+ else
+ COMPILER_CHECK_LIST="g++ CC"
+ fi
COMPILER_NAME=C++
@@ -20448,31 +20445,31 @@
if test "x$CXX" = x; then
- # Print a helpful message on how to acquire the necessary build dependency.
- # devkit is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=devkit
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # devkit is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=devkit
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ as_fn_error $? "Could not find a $COMPILER_NAME compiler. $HELP_MSG" "$LINENO" 5
fi
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -20493,8 +20490,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -20509,8 +20506,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -20538,9 +20535,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of CXX, which resolves as \"$new_path\", is invalid." >&6;}
@@ -20716,80 +20713,80 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of CXX" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXX to \"$new_complete\"" >&5
+ CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CXX to \"$new_complete\"" >&6;}
- fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking resolved symbolic links for CXX" >&5
$as_echo_n "checking resolved symbolic links for CXX... " >&6; }
TEST_COMPILER="$CXX"
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- TEST_COMPILER=`$READLINK -f $TEST_COMPILER`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $TEST_COMPILER`
- sym_link_file=`$BASENAME $TEST_COMPILER`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- TEST_COMPILER=$sym_link_dir/$sym_link_file
- fi
- fi
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ TEST_COMPILER=`$READLINK -f $TEST_COMPILER`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $TEST_COMPILER`
+ sym_link_file=`$BASENAME $TEST_COMPILER`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ TEST_COMPILER=$sym_link_dir/$sym_link_file
+ fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $TEST_COMPILER" >&5
$as_echo "$TEST_COMPILER" >&6; }
@@ -20929,8 +20926,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -20945,8 +20942,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -20974,9 +20971,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CXX, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CXX, which resolves as \"$new_path\", is invalid." >&6;}
@@ -21152,81 +21149,81 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CXX, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of PROPER_COMPILER_CXX, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of PROPER_COMPILER_CXX, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CXX" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of PROPER_COMPILER_CXX" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- PROPER_COMPILER_CXX="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&5
+ PROPER_COMPILER_CXX="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting PROPER_COMPILER_CXX to \"$new_complete\"" >&6;}
- fi
+ fi
PATH="$RETRY_COMPILER_SAVED_PATH"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for resolved symbolic links for CXX" >&5
$as_echo_n "checking for resolved symbolic links for CXX... " >&6; }
- if test "x$OPENJDK_BUILD_OS" != xwindows; then
- # Follow a chain of symbolic links. Use readlink
- # where it exists, else fall back to horribly
- # complicated shell code.
- if test "x$READLINK_TESTED" != yes; then
- # On MacOSX there is a readlink tool with a different
- # purpose than the GNU readlink tool. Check the found readlink.
- ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
- if test "x$ISGNU" = x; then
- # A readlink that we do not know how to use.
- # Are there other non-GNU readlinks out there?
- READLINK_TESTED=yes
- READLINK=
- fi
- fi
-
- if test "x$READLINK" != x; then
- PROPER_COMPILER_CXX=`$READLINK -f $PROPER_COMPILER_CXX`
- else
- # Save the current directory for restoring afterwards
- STARTDIR=$PWD
- COUNTER=0
- sym_link_dir=`$DIRNAME $PROPER_COMPILER_CXX`
- sym_link_file=`$BASENAME $PROPER_COMPILER_CXX`
- cd $sym_link_dir
- # Use -P flag to resolve symlinks in directories.
- cd `$THEPWDCMD -P`
- sym_link_dir=`$THEPWDCMD -P`
- # Resolve file symlinks
- while test $COUNTER -lt 20; do
- ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
- if test "x$ISLINK" == x; then
- # This is not a symbolic link! We are done!
- break
- fi
- # Again resolve directory symlinks since the target of the just found
- # link could be in a different directory
- cd `$DIRNAME $ISLINK`
- sym_link_dir=`$THEPWDCMD -P`
- sym_link_file=`$BASENAME $ISLINK`
- let COUNTER=COUNTER+1
- done
- cd $STARTDIR
- PROPER_COMPILER_CXX=$sym_link_dir/$sym_link_file
- fi
- fi
+ if test "x$OPENJDK_BUILD_OS" != xwindows; then
+ # Follow a chain of symbolic links. Use readlink
+ # where it exists, else fall back to horribly
+ # complicated shell code.
+ if test "x$READLINK_TESTED" != yes; then
+ # On MacOSX there is a readlink tool with a different
+ # purpose than the GNU readlink tool. Check the found readlink.
+ ISGNU=`$READLINK --version 2>&1 | $GREP GNU`
+ if test "x$ISGNU" = x; then
+ # A readlink that we do not know how to use.
+ # Are there other non-GNU readlinks out there?
+ READLINK_TESTED=yes
+ READLINK=
+ fi
+ fi
+
+ if test "x$READLINK" != x; then
+ PROPER_COMPILER_CXX=`$READLINK -f $PROPER_COMPILER_CXX`
+ else
+ # Save the current directory for restoring afterwards
+ STARTDIR=$PWD
+ COUNTER=0
+ sym_link_dir=`$DIRNAME $PROPER_COMPILER_CXX`
+ sym_link_file=`$BASENAME $PROPER_COMPILER_CXX`
+ cd $sym_link_dir
+ # Use -P flag to resolve symlinks in directories.
+ cd `$THEPWDCMD -P`
+ sym_link_dir=`$THEPWDCMD -P`
+ # Resolve file symlinks
+ while test $COUNTER -lt 20; do
+ ISLINK=`$LS -l $sym_link_dir/$sym_link_file | $GREP '\->' | $SED -e 's/.*-> \(.*\)/\1/'`
+ if test "x$ISLINK" == x; then
+ # This is not a symbolic link! We are done!
+ break
+ fi
+ # Again resolve directory symlinks since the target of the just found
+ # link could be in a different directory
+ cd `$DIRNAME $ISLINK`
+ sym_link_dir=`$THEPWDCMD -P`
+ sym_link_file=`$BASENAME $ISLINK`
+ let COUNTER=COUNTER+1
+ done
+ cd $STARTDIR
+ PROPER_COMPILER_CXX=$sym_link_dir/$sym_link_file
+ fi
+ fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $PROPER_COMPILER_CXX" >&5
$as_echo "$PROPER_COMPILER_CXX" >&6; }
@@ -21298,8 +21295,8 @@
$as_echo "$as_me: Using $COMPILER_VENDOR $COMPILER_NAME compiler version $COMPILER_VERSION (located at $COMPILER)" >&6;}
-# Now that we have resolved CXX ourself, let autoconf have its go at it
-ac_ext=cpp
+ # Now that we have resolved CXX ourself, let autoconf have its go at it
+ ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -21557,9 +21554,9 @@
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-### Locate other tools
-
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ ### Locate other tools
+
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
ac_ext=m
ac_cpp='$OBJCPP $CPPFLAGS'
ac_compile='$OBJC -c $OBJCFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -21830,8 +21827,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -21846,8 +21843,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -21875,9 +21872,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of OBJC, which resolves as \"$new_path\", is invalid." >&6;}
@@ -22053,53 +22050,53 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of OBJC" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJC to \"$new_complete\"" >&5
+ OBJC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJC to \"$new_complete\"" >&6;}
- fi
-
-else
+ fi
+
+ else
OBJC=
-fi
-
-# Restore the flags to the user specified values.
-# This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
-CFLAGS="$ORG_CFLAGS"
-CXXFLAGS="$ORG_CXXFLAGS"
-OBJCFLAGS="$ORG_OBJCFLAGS"
-
-LD="$CC"
-LDEXE="$CC"
-LDCXX="$CXX"
-LDEXECXX="$CXX"
-
-# LDEXE is the linker to use, when creating executables.
-
-# Linking C++ libraries.
-
-# Linking C++ executables.
-
-
-if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ fi
+
+ # Restore the flags to the user specified values.
+ # This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
+ CFLAGS="$ORG_CFLAGS"
+ CXXFLAGS="$ORG_CXXFLAGS"
+ OBJCFLAGS="$ORG_OBJCFLAGS"
+
+ LD="$CC"
+ LDEXE="$CC"
+ LDCXX="$CXX"
+ LDEXECXX="$CXX"
+
+ # LDEXE is the linker to use, when creating executables.
+
+ # Linking C++ libraries.
+
+ # Linking C++ executables.
+
+
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
@@ -22211,8 +22208,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22227,8 +22224,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22256,9 +22253,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of AR, which resolves as \"$new_path\", is invalid." >&6;}
@@ -22434,47 +22431,47 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AR, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of AR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of AR" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- AR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AR to \"$new_complete\"" >&5
+ AR="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AR to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting AR to \"$new_complete\"" >&6;}
- fi
-
-fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ fi
+
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
ARFLAGS="-r"
-else
+ else
ARFLAGS=""
-fi
-
-
-# For hotspot, we need these in Windows mixed path; other platforms keep them the same
-HOTSPOT_CXX="$CXX"
-HOTSPOT_LD="$LD"
-
-
-
-COMPILER_NAME=gcc
-COMPILER_TYPE=CC
-if test "x$OPENJDK_TARGET_OS" = xwindows; then :
+ fi
+
+
+ # For hotspot, we need these in Windows mixed path; other platforms keep them the same
+ HOTSPOT_CXX="$CXX"
+ HOTSPOT_LD="$LD"
+
+
+
+ COMPILER_NAME=gcc
+ COMPILER_TYPE=CC
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then :
# For now, assume that we are always compiling using cl.exe.
CC_OUT_OPTION=-Fo
@@ -22558,8 +22555,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22574,8 +22571,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22603,9 +22600,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINLD, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of WINLD, which resolves as \"$new_path\", is invalid." >&6;}
@@ -22781,29 +22778,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINLD, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINLD, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of WINLD, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of WINLD" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of WINLD" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- WINLD="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINLD to \"$new_complete\"" >&5
+ WINLD="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINLD to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting WINLD to \"$new_complete\"" >&6;}
- fi
+ fi
printf "Windows linker was found at $WINLD\n"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the found link.exe is actually the Visual Studio linker" >&5
@@ -22895,8 +22892,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22911,8 +22908,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -22940,9 +22937,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of MT, which resolves as \"$new_path\", is invalid." >&6;}
@@ -23118,29 +23115,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MT, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of MT, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of MT" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- MT="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MT to \"$new_complete\"" >&5
+ MT="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MT to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting MT to \"$new_complete\"" >&6;}
- fi
+ fi
# The resource compiler
# Extract the first word of "rc", so it can be a program name with args.
@@ -23216,8 +23213,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23232,8 +23229,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23261,9 +23258,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of RC, which resolves as \"$new_path\", is invalid." >&6;}
@@ -23439,29 +23436,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of RC, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of RC, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of RC" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- RC="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting RC to \"$new_complete\"" >&5
+ RC="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting RC to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting RC to \"$new_complete\"" >&6;}
- fi
+ fi
# For hotspot, we need these in Windows mixed path,
@@ -23516,26 +23513,26 @@
RC_FLAGS="-nologo -l 0x409 -r"
if test "x$VARIANT" = xOPT; then :
- RC_FLAGS="$RC_FLAGS -d NDEBUG"
-
-fi
-
- # The version variables used to create RC_FLAGS may be overridden
- # in a custom configure script, or possibly the command line.
- # Let those variables be expanded at make time in spec.gmk.
- # The \$ are escaped to the shell, and the $(...) variables
- # are evaluated by make.
- RC_FLAGS="$RC_FLAGS \
- -d \"JDK_BUILD_ID=\$(FULL_VERSION)\" \
- -d \"JDK_COMPANY=\$(COMPANY_NAME)\" \
- -d \"JDK_COMPONENT=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) binary\" \
- -d \"JDK_VER=\$(JDK_MINOR_VERSION).\$(JDK_MICRO_VERSION).\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0).\$(COOKED_BUILD_NUMBER)\" \
- -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\" \
- -d \"JDK_NAME=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) \$(JDK_MINOR_VERSION) \$(JDK_UPDATE_META_TAG)\" \
- -d \"JDK_FVER=\$(JDK_MINOR_VERSION),\$(JDK_MICRO_VERSION),\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0),\$(COOKED_BUILD_NUMBER)\""
-
- # lib.exe is used to create static libraries.
- # Extract the first word of "lib", so it can be a program name with args.
+ RC_FLAGS="$RC_FLAGS -d NDEBUG"
+
+fi
+
+ # The version variables used to create RC_FLAGS may be overridden
+ # in a custom configure script, or possibly the command line.
+ # Let those variables be expanded at make time in spec.gmk.
+ # The \$ are escaped to the shell, and the $(...) variables
+ # are evaluated by make.
+ RC_FLAGS="$RC_FLAGS \
+ -d \"JDK_BUILD_ID=\$(FULL_VERSION)\" \
+ -d \"JDK_COMPANY=\$(COMPANY_NAME)\" \
+ -d \"JDK_COMPONENT=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) binary\" \
+ -d \"JDK_VER=\$(JDK_MINOR_VERSION).\$(JDK_MICRO_VERSION).\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0).\$(COOKED_BUILD_NUMBER)\" \
+ -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\" \
+ -d \"JDK_NAME=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) \$(JDK_MINOR_VERSION) \$(JDK_UPDATE_META_TAG)\" \
+ -d \"JDK_FVER=\$(JDK_MINOR_VERSION),\$(JDK_MICRO_VERSION),\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0),\$(COOKED_BUILD_NUMBER)\""
+
+ # lib.exe is used to create static libraries.
+ # Extract the first word of "lib", so it can be a program name with args.
set dummy lib; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -23591,8 +23588,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23607,8 +23604,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23636,9 +23633,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINAR, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of WINAR, which resolves as \"$new_path\", is invalid." >&6;}
@@ -23814,34 +23811,34 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINAR, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of WINAR, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of WINAR, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of WINAR" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of WINAR" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- WINAR="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINAR to \"$new_complete\"" >&5
+ WINAR="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting WINAR to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting WINAR to \"$new_complete\"" >&6;}
- fi
-
- AR="$WINAR"
- ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
-
- # Extract the first word of "dumpbin", so it can be a program name with args.
+ fi
+
+ AR="$WINAR"
+ ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
+
+ # Extract the first word of "dumpbin", so it can be a program name with args.
set dummy dumpbin; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -23897,8 +23894,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23913,8 +23910,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -23942,9 +23939,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$new_path\", is invalid." >&6;}
@@ -24120,39 +24117,39 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of DUMPBIN, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of DUMPBIN" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- DUMPBIN="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting DUMPBIN to \"$new_complete\"" >&5
+ DUMPBIN="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting DUMPBIN to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting DUMPBIN to \"$new_complete\"" >&6;}
- fi
-
-
- COMPILER_TYPE=CL
- CCXXFLAGS="$CCXXFLAGS -nologo"
-
-fi
-
-
-
-ac_ext=c
+ fi
+
+
+ COMPILER_TYPE=CL
+ CCXXFLAGS="$CCXXFLAGS -nologo"
+
+fi
+
+
+
+ ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -24308,8 +24305,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -24324,8 +24321,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -24353,9 +24350,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of CPP, which resolves as \"$new_path\", is invalid." >&6;}
@@ -24531,32 +24528,32 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CPP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of CPP" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CPP to \"$new_complete\"" >&5
+ CPP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CPP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CPP to \"$new_complete\"" >&6;}
- fi
-
-
-ac_ext=cpp
+ fi
+
+
+ ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -24708,8 +24705,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -24724,8 +24721,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -24753,9 +24750,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of CXXCPP, which resolves as \"$new_path\", is invalid." >&6;}
@@ -24931,32 +24928,32 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of CXXCPP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of CXXCPP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of CXXCPP" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- CXXCPP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXXCPP to \"$new_complete\"" >&5
+ CXXCPP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting CXXCPP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting CXXCPP to \"$new_complete\"" >&6;}
- fi
-
-
-if test "x$COMPILE_TYPE" != "xcross"; then
+ fi
+
+
+ if test "x$COMPILE_TYPE" != "xcross"; then
# If we are not cross compiling, use the same compilers for
# building the build platform executables. The cross-compilation
# case needed to be done earlier, but this can only be done after
@@ -24964,20 +24961,20 @@
BUILD_CC="$CC"
BUILD_CXX="$CXX"
BUILD_LD="$LD"
-fi
-
-# for solaris we really need solaris tools, and not gnu equivalent
-# these seems to normally reside in /usr/ccs/bin so add that to path before
-# starting to probe
-#
-# NOTE: I add this /usr/ccs/bin after TOOLS but before OLD_PATH
-# so that it can be overriden --with-tools-dir
-if test "x$OPENJDK_BUILD_OS" = xsolaris; then
+ fi
+
+ # for solaris we really need solaris tools, and not gnu equivalent
+ # these seems to normally reside in /usr/ccs/bin so add that to path before
+ # starting to probe
+ #
+ # NOTE: I add this /usr/ccs/bin after TOOLS but before OLD_PATH
+ # so that it can be overriden --with-tools-dir
+ if test "x$OPENJDK_BUILD_OS" = xsolaris; then
PATH="${TOOLS_DIR}:/usr/ccs/bin:${OLD_PATH}"
-fi
-
-# Find the right assembler.
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+
+ # Find the right assembler.
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -25037,8 +25034,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25053,8 +25050,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25082,9 +25079,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of AS, which resolves as \"$new_path\", is invalid." >&6;}
@@ -25260,36 +25257,36 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of AS, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of AS, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of AS" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- AS="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AS to \"$new_complete\"" >&5
+ AS="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting AS to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting AS to \"$new_complete\"" >&6;}
- fi
-
-else
+ fi
+
+ else
AS="$CC -c"
-fi
-
-
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+
+
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -25349,8 +25346,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25365,8 +25362,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25394,9 +25391,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$new_path\", is invalid." >&6;}
@@ -25572,29 +25569,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
+ NM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "gnm", so it can be a program name with args.
set dummy gnm; ac_word=$2
@@ -25655,8 +25652,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25671,8 +25668,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25700,9 +25697,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of GNM, which resolves as \"$new_path\", is invalid." >&6;}
@@ -25878,29 +25875,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of GNM, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of GNM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of GNM" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- GNM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting GNM to \"$new_complete\"" >&5
+ GNM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting GNM to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting GNM to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
@@ -25961,8 +25958,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -25977,8 +25974,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -26006,9 +26003,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$new_path\", is invalid." >&6;}
@@ -26184,29 +26181,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
+ STRIP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
+ fi
# Extract the first word of "mcs", so it can be a program name with args.
set dummy mcs; ac_word=$2
@@ -26267,8 +26264,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -26283,8 +26280,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -26312,9 +26309,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of MCS, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of MCS, which resolves as \"$new_path\", is invalid." >&6;}
@@ -26490,31 +26487,31 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MCS, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of MCS, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of MCS, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of MCS" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of MCS" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- MCS="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MCS to \"$new_complete\"" >&5
+ MCS="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting MCS to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting MCS to \"$new_complete\"" >&6;}
- fi
-
-elif test "x$OPENJDK_TARGET_OS" != xwindows; then
+ fi
+
+ elif test "x$OPENJDK_TARGET_OS" != xwindows; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}nm", so it can be a program name with args.
set dummy ${ac_tool_prefix}nm; ac_word=$2
@@ -26626,8 +26623,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -26642,8 +26639,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -26671,9 +26668,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$new_path\", is invalid." >&6;}
@@ -26849,29 +26846,29 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of NM, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of NM, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of NM" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- NM="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
+ NM="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting NM to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting NM to \"$new_complete\"" >&6;}
- fi
+ fi
GNM="$NM"
@@ -26986,8 +26983,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27002,8 +26999,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27031,9 +27028,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$new_path\", is invalid." >&6;}
@@ -27209,35 +27206,35 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of STRIP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of STRIP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of STRIP" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- STRIP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
+ STRIP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting STRIP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting STRIP to \"$new_complete\"" >&6;}
- fi
-
-fi
-
-# objcopy is used for moving debug symbols to separate files when
-# full debug symbols are enabled.
-if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
+ fi
+
+ fi
+
+ # objcopy is used for moving debug symbols to separate files when
+ # full debug symbols are enabled.
+ if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
if test -n "$ac_tool_prefix"; then
for ac_prog in gobjcopy objcopy
do
@@ -27359,8 +27356,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27375,8 +27372,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27404,9 +27401,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$new_path\", is invalid." >&6;}
@@ -27582,34 +27579,34 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJCOPY, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of OBJCOPY" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJCOPY="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJCOPY to \"$new_complete\"" >&5
+ OBJCOPY="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJCOPY to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJCOPY to \"$new_complete\"" >&6;}
- fi
-
- fi
-fi
-
-if test -n "$ac_tool_prefix"; then
+ fi
+
+ fi
+ fi
+
+ if test -n "$ac_tool_prefix"; then
for ac_prog in gobjdump objdump
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
@@ -27709,8 +27706,8 @@
fi
fi
-if test "x$OBJDUMP" != x; then
- # Only used for compare.sh; we can live without it. BASIC_FIXUP_EXECUTABLE bails if argument is missing.
+ if test "x$OBJDUMP" != x; then
+ # Only used for compare.sh; we can live without it. BASIC_FIXUP_EXECUTABLE bails if argument is missing.
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -27730,8 +27727,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27746,8 +27743,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -27775,9 +27772,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$new_path\", is invalid." >&6;}
@@ -27953,34 +27950,34 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of OBJDUMP, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of OBJDUMP" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- OBJDUMP="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJDUMP to \"$new_complete\"" >&5
+ OBJDUMP="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting OBJDUMP to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting OBJDUMP to \"$new_complete\"" >&6;}
- fi
-
-fi
-
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- # Extract the first word of "lipo", so it can be a program name with args.
+ fi
+
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ # Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -28039,8 +28036,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -28055,8 +28052,8 @@
# bat and cmd files are not always considered executable in cygwin causing which
# to not find them
if test "x$new_path" = x \
- && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
- && test "x`$LS \"$path\" 2>/dev/null`" != x; then
+ && test "x`$ECHO \"$path\" | $GREP -i -e \"\\.bat$\" -e \"\\.cmd$\"`" != x \
+ && test "x`$LS \"$path\" 2>/dev/null`" != x; then
new_path=`$CYGPATH -u "$path"`
fi
if test "x$new_path" = x; then
@@ -28084,9 +28081,9 @@
# Short path failed, file does not exist as specified.
# Try adding .exe or .cmd
if test -f "${new_path}.exe"; then
- input_to_shortpath="${new_path}.exe"
+ input_to_shortpath="${new_path}.exe"
elif test -f "${new_path}.cmd"; then
- input_to_shortpath="${new_path}.cmd"
+ input_to_shortpath="${new_path}.cmd"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$new_path\", is invalid." >&5
$as_echo "$as_me: The path of LIPO, which resolves as \"$new_path\", is invalid." >&6;}
@@ -28262,36 +28259,36 @@
fi
if test "x$new_path" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: The path of LIPO, which resolves as \"$complete\", is not found." >&5
$as_echo "$as_me: The path of LIPO, which resolves as \"$complete\", is not found." >&6;}
- has_space=`$ECHO "$complete" | $GREP " "`
- if test "x$has_space" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
+ has_space=`$ECHO "$complete" | $GREP " "`
+ if test "x$has_space" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: This might be caused by spaces in the path, which is not allowed." >&5
$as_echo "$as_me: This might be caused by spaces in the path, which is not allowed." >&6;}
- fi
- as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
- fi
- fi
-
- # Now join together the path and the arguments once again
- if test "x$arguments" != xEOL; then
- new_complete="$new_path ${arguments% *}"
- else
- new_complete="$new_path"
- fi
+ fi
+ as_fn_error $? "Cannot locate the the path of LIPO" "$LINENO" 5
+ fi
+ fi
+
+ # Now join together the path and the arguments once again
+ if test "x$arguments" != xEOL; then
+ new_complete="$new_path ${arguments% *}"
+ else
+ new_complete="$new_path"
+ fi
if test "x$complete" != "x$new_complete"; then
- LIPO="$new_complete"
- { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LIPO to \"$new_complete\"" >&5
+ LIPO="$new_complete"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting LIPO to \"$new_complete\"" >&5
$as_echo "$as_me: Rewriting LIPO to \"$new_complete\"" >&6;}
- fi
-
-fi
-
-
-
-# Restore old path without tools dir
-PATH="$OLD_PATH"
+ fi
+
+ fi
+
+
+
+ # Restore old path without tools dir
+ PATH="$OLD_PATH"
# FIXME: Currently we must test this after paths but before flags. Fix!
@@ -28429,15 +28426,15 @@
-###############################################################################
-#
-# Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code.
-# (The JVM can use 32 or 64 bit Java pointers but that decision
-# is made at runtime.)
-#
-
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # Always specify -m flags on Solaris
+ ###############################################################################
+ #
+ # Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code.
+ # (The JVM can use 32 or 64 bit Java pointers but that decision
+ # is made at runtime.)
+ #
+
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Always specify -m flags on Solaris
# When we add flags to the "official" CFLAGS etc, we need to
# keep track of these additions in ADDED_CFLAGS etc. These
@@ -28455,9 +28452,9 @@
CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
-elif test "x$COMPILE_TYPE" = xreduced; then
- if test "x$OPENJDK_TARGET_OS" != xwindows; then
- # Specify -m if running reduced on other Posix platforms
+ elif test "x$COMPILE_TYPE" = xreduced; then
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # Specify -m if running reduced on other Posix platforms
# When we add flags to the "official" CFLAGS etc, we need to
# keep track of these additions in ADDED_CFLAGS etc. These
@@ -28475,11 +28472,11 @@
CXXFLAGS_JDK="${CXXFLAGS_JDK}${ADDED_CXXFLAGS}"
LDFLAGS_JDK="${LDFLAGS_JDK}${ADDED_LDFLAGS}"
- fi
-fi
-
-# Make compilation sanity check
-for ac_header in stdio.h
+ fi
+ fi
+
+ # Make compilation sanity check
+ for ac_header in stdio.h
do :
ac_fn_cxx_check_header_mongrel "$LINENO" "stdio.h" "ac_cv_header_stdio_h" "$ac_includes_default"
if test "x$ac_cv_header_stdio_h" = xyes; then :
@@ -28489,23 +28486,23 @@
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Failed to compile stdio.h. This likely implies missing compile dependencies." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Failed to compile stdio.h. This likely implies missing compile dependencies." >&5
$as_echo "$as_me: Failed to compile stdio.h. This likely implies missing compile dependencies." >&6;}
- if test "x$COMPILE_TYPE" = xreduced; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a reduced build. Check that you have 32-bit libraries installed." >&5
+ if test "x$COMPILE_TYPE" = xreduced; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a reduced build. Check that you have 32-bit libraries installed." >&5
$as_echo "$as_me: You are doing a reduced build. Check that you have 32-bit libraries installed." >&6;}
- elif test "x$COMPILE_TYPE" = xcross; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&5
+ elif test "x$COMPILE_TYPE" = xcross; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&5
$as_echo "$as_me: You are doing a cross-compilation. Check that you have all target platform libraries installed." >&6;}
- fi
- as_fn_error $? "Cannot continue." "$LINENO" 5
-
-fi
-
-done
-
-
-# The cast to long int works around a bug in the HP C Compiler
+ fi
+ as_fn_error $? "Cannot continue." "$LINENO" 5
+
+fi
+
+done
+
+
+ # The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
@@ -28539,34 +28536,34 @@
-if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
- # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
- SIZEOF_INT_P="$ac_cv_sizeof_int_p"
-fi
-
-if test "x$SIZEOF_INT_P" = x; then
+ if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
+ # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
+ SIZEOF_INT_P="$ac_cv_sizeof_int_p"
+ fi
+
+ if test "x$SIZEOF_INT_P" = x; then
# The test failed, lets stick to the assumed value.
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&5
$as_echo "$as_me: WARNING: The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS." >&2;}
-else
+ else
TESTED_TARGET_CPU_BITS=`expr 8 \* $SIZEOF_INT_P`
if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
- as_fn_error $? "The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" "$LINENO" 5
- fi
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for target address size" >&5
+ as_fn_error $? "The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)" "$LINENO" 5
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for target address size" >&5
$as_echo_n "checking for target address size... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_CPU_BITS bits" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OPENJDK_TARGET_CPU_BITS bits" >&5
$as_echo "$OPENJDK_TARGET_CPU_BITS bits" >&6; }
-###############################################################################
-#
-# Is the target little of big endian?
-#
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
+ ###############################################################################
+ #
+ # Is the target little of big endian?
+ #
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
$as_echo_n "checking whether byte ordering is bigendian... " >&6; }
if ${ac_cv_c_bigendian+:} false; then :
$as_echo_n "(cached) " >&6
@@ -28787,23 +28784,23 @@
esac
-if test "x$ENDIAN" = xuniversal_endianness; then
+ if test "x$ENDIAN" = xuniversal_endianness; then
as_fn_error $? "Building with both big and little endianness is not supported" "$LINENO" 5
-fi
-if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
+ fi
+ if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
as_fn_error $? "The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)" "$LINENO" 5
-fi
+ fi
# Configure flags for the tools
-###############################################################################
-#
-# How to compile shared libraries.
-#
-
-if test "x$GCC" = xyes; then
+ ###############################################################################
+ #
+ # How to compile shared libraries.
+ #
+
+ if test "x$GCC" = xyes; then
COMPILER_NAME=gcc
PICFLAG="-fPIC"
LIBRARY_PREFIX=lib
@@ -28828,95 +28825,95 @@
# Linking is different on MacOSX
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # Might change in the future to clang.
- COMPILER_NAME=gcc
- SHARED_LIBRARY='lib$1.dylib'
- SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
- SHARED_LIBRARY_SUFFIX='.dylib'
- EXE_SUFFIX=''
- SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/$1'
- SET_SHARED_LIBRARY_MAPFILE=''
- SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
- SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
- POST_STRIP_CMD="$STRIP -S"
- fi
-else
+ # Might change in the future to clang.
+ COMPILER_NAME=gcc
+ SHARED_LIBRARY='lib$1.dylib'
+ SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
+ SHARED_LIBRARY_SUFFIX='.dylib'
+ EXE_SUFFIX=''
+ SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/$1'
+ SET_SHARED_LIBRARY_MAPFILE=''
+ SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
+ POST_STRIP_CMD="$STRIP -S"
+ fi
+ else
if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler
- COMPILER_NAME=ossc
- PICFLAG="-KPIC"
- LIBRARY_PREFIX=lib
- SHARED_LIBRARY='lib$1.so'
- STATIC_LIBRARY='lib$1.a'
- SHARED_LIBRARY_FLAGS="-G"
- SHARED_LIBRARY_SUFFIX='.so'
- STATIC_LIBRARY_SUFFIX='.a'
- OBJ_SUFFIX='.o'
- EXE_SUFFIX=''
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE='-M$1'
- C_FLAG_REORDER='-xF'
- CXX_FLAG_REORDER='-xF'
- SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN$1'
- SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
- CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
- CFLAGS_JDKLIB_EXTRA='-xstrconst'
- POST_STRIP_CMD="$STRIP -x"
- POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\""
+ # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler
+ COMPILER_NAME=ossc
+ PICFLAG="-KPIC"
+ LIBRARY_PREFIX=lib
+ SHARED_LIBRARY='lib$1.so'
+ STATIC_LIBRARY='lib$1.a'
+ SHARED_LIBRARY_FLAGS="-G"
+ SHARED_LIBRARY_SUFFIX='.so'
+ STATIC_LIBRARY_SUFFIX='.a'
+ OBJ_SUFFIX='.o'
+ EXE_SUFFIX=''
+ SET_SHARED_LIBRARY_NAME=''
+ SET_SHARED_LIBRARY_MAPFILE='-M$1'
+ C_FLAG_REORDER='-xF'
+ CXX_FLAG_REORDER='-xF'
+ SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN$1'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
+ CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
+ CFLAGS_JDKLIB_EXTRA='-xstrconst'
+ POST_STRIP_CMD="$STRIP -x"
+ POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\""
fi
if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # If it is not gcc, then assume it is the MS Visual Studio compiler
- COMPILER_NAME=cl
- PICFLAG=""
- LIBRARY_PREFIX=
- SHARED_LIBRARY='$1.dll'
- STATIC_LIBRARY='$1.lib'
- SHARED_LIBRARY_FLAGS="-LD"
- SHARED_LIBRARY_SUFFIX='.dll'
- STATIC_LIBRARY_SUFFIX='.lib'
- OBJ_SUFFIX='.obj'
- EXE_SUFFIX='.exe'
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE=''
- SET_SHARED_LIBRARY_ORIGIN=''
- SET_EXECUTABLE_ORIGIN=''
- fi
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-# The (cross) compiler is now configured, we can now test capabilities
-# of the target platform.
-
-
-
-###############################################################################
-#
-# Setup the opt flags for different compilers
-# and different operating systems.
-#
-
-#
-# NOTE: check for -mstackrealign needs to be below potential addition of -m32
-#
-if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ # If it is not gcc, then assume it is the MS Visual Studio compiler
+ COMPILER_NAME=cl
+ PICFLAG=""
+ LIBRARY_PREFIX=
+ SHARED_LIBRARY='$1.dll'
+ STATIC_LIBRARY='$1.lib'
+ SHARED_LIBRARY_FLAGS="-LD"
+ SHARED_LIBRARY_SUFFIX='.dll'
+ STATIC_LIBRARY_SUFFIX='.lib'
+ OBJ_SUFFIX='.obj'
+ EXE_SUFFIX='.exe'
+ SET_SHARED_LIBRARY_NAME=''
+ SET_SHARED_LIBRARY_MAPFILE=''
+ SET_SHARED_LIBRARY_ORIGIN=''
+ SET_EXECUTABLE_ORIGIN=''
+ fi
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ # The (cross) compiler is now configured, we can now test capabilities
+ # of the target platform.
+
+
+
+ ###############################################################################
+ #
+ # Setup the opt flags for different compilers
+ # and different operating systems.
+ #
+
+ #
+ # NOTE: check for -mstackrealign needs to be below potential addition of -m32
+ #
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
# On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
# While waiting for a better solution, the current workaround is to use -mstackrealign.
CFLAGS="$CFLAGS -mstackrealign"
@@ -28928,176 +28925,177 @@
_ACEOF
if ac_fn_cxx_try_link "$LINENO"; then :
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- as_fn_error $? "The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ as_fn_error $? "The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path." "$LINENO" 5
+
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-fi
-
-C_FLAG_DEPS="-MMD -MF"
-CXX_FLAG_DEPS="-MMD -MF"
-
-case $COMPILER_TYPE in
- CC )
- case $COMPILER_NAME in
- gcc )
- case $OPENJDK_TARGET_OS in
- macosx )
- # On MacOSX we optimize for size, something
- # we should do for all platforms?
- C_O_FLAG_HI="-Os"
- C_O_FLAG_NORM="-Os"
- C_O_FLAG_NONE=""
- ;;
- *)
- C_O_FLAG_HI="-O3"
- C_O_FLAG_NORM="-O2"
- C_O_FLAG_NONE="-O0"
- ;;
- esac
- CXX_O_FLAG_HI="$C_O_FLAG_HI"
- CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
- CFLAGS_DEBUG_SYMBOLS="-g"
- CXXFLAGS_DEBUG_SYMBOLS="-g"
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
+ fi
+
+ C_FLAG_DEPS="-MMD -MF"
+ CXX_FLAG_DEPS="-MMD -MF"
+
+ case $COMPILER_TYPE in
+ CC )
+ case $COMPILER_NAME in
+ gcc )
+ case $OPENJDK_TARGET_OS in
+ macosx )
+ # On MacOSX we optimize for size, something
+ # we should do for all platforms?
+ C_O_FLAG_HI="-Os"
+ C_O_FLAG_NORM="-Os"
+ C_O_FLAG_NONE=""
+ ;;
+ *)
+ C_O_FLAG_HI="-O3"
+ C_O_FLAG_NORM="-O2"
+ C_O_FLAG_NONE="-O0"
+ ;;
+ esac
+ CXX_O_FLAG_HI="$C_O_FLAG_HI"
+ CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
+ CFLAGS_DEBUG_SYMBOLS="-g"
+ CXXFLAGS_DEBUG_SYMBOLS="-g"
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
CFLAGS_DEBUG_SYMBOLS="-g1"
CXXFLAGS_DEBUG_SYMBOLS="-g1"
- fi
- ;;
- ossc )
- #
- # Forte has different names for this with their C++ compiler...
- #
- C_FLAG_DEPS="-xMMD -xMF"
- CXX_FLAG_DEPS="-xMMD -xMF"
-
- # Extra options used with HIGHEST
- #
- # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
- # done with care, there are some assumptions below that need to
- # be understood about the use of pointers, and IEEE behavior.
- #
- # Use non-standard floating point mode (not IEEE 754)
- CC_HIGHEST="$CC_HIGHEST -fns"
- # Do some simplification of floating point arithmetic (not IEEE 754)
- CC_HIGHEST="$CC_HIGHEST -fsimple"
- # Use single precision floating point with 'float'
- CC_HIGHEST="$CC_HIGHEST -fsingle"
- # Assume memory references via basic pointer types do not alias
- # (Source with excessing pointer casting and data access with mixed
- # pointer types are not recommended)
- CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
- # Use intrinsic or inline versions for math/std functions
- # (If you expect perfect errno behavior, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
- # Loop data dependency optimizations (need -xO3 or higher)
- CC_HIGHEST="$CC_HIGHEST -xdepend"
- # Pointer parameters to functions do not overlap
- # (Similar to -xalias_level=basic usage, but less obvious sometimes.
- # If you pass in multiple pointers to the same data, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xrestrict"
- # Inline some library routines
- # (If you expect perfect errno behavior, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xlibmil"
- # Use optimized math routines
- # (If you expect perfect errno behavior, do not use this)
- # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
- #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
-
- if test "x$OPENJDK_TARGET_CPU" = xsparc; then
- CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -xmemalign=4s"
- fi
-
- case $OPENJDK_TARGET_CPU_ARCH in
- x86)
- C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
- C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
- C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
- C_O_FLAG_NONE="-xregs=no%frameptr"
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
- CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
- CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
- CXX_O_FLAG_NONE="-xregs=no%frameptr"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
- fi
- ;;
- sparc)
- CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
- C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_NONE=""
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
- CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_NONE=""
- ;;
- esac
-
- CFLAGS_DEBUG_SYMBOLS="-g -xs"
- CXXFLAGS_DEBUG_SYMBOLS="-g0 -xs"
- esac
- ;;
- CL )
- C_O_FLAG_HIGHEST="-O2"
- C_O_FLAG_HI="-O1"
- C_O_FLAG_NORM="-O1"
- C_O_FLAG_NONE="-Od"
- CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
- CXX_O_FLAG_HI="$C_O_FLAG_HI"
- CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
- ;;
-esac
-
-if test -z "$C_O_FLAG_HIGHEST"; then
- C_O_FLAG_HIGHEST="$C_O_FLAG_HI"
-fi
-
-if test -z "$CXX_O_FLAG_HIGHEST"; then
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI"
-fi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags" >&5
+ fi
+ ;;
+ ossc )
+ #
+ # Forte has different names for this with their C++ compiler...
+ #
+ C_FLAG_DEPS="-xMMD -xMF"
+ CXX_FLAG_DEPS="-xMMD -xMF"
+
+ # Extra options used with HIGHEST
+ #
+ # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
+ # done with care, there are some assumptions below that need to
+ # be understood about the use of pointers, and IEEE behavior.
+ #
+ # Use non-standard floating point mode (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fns"
+ # Do some simplification of floating point arithmetic (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fsimple"
+ # Use single precision floating point with 'float'
+ CC_HIGHEST="$CC_HIGHEST -fsingle"
+ # Assume memory references via basic pointer types do not alias
+ # (Source with excessing pointer casting and data access with mixed
+ # pointer types are not recommended)
+ CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
+ # Use intrinsic or inline versions for math/std functions
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
+ # Loop data dependency optimizations (need -xO3 or higher)
+ CC_HIGHEST="$CC_HIGHEST -xdepend"
+ # Pointer parameters to functions do not overlap
+ # (Similar to -xalias_level=basic usage, but less obvious sometimes.
+ # If you pass in multiple pointers to the same data, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xrestrict"
+ # Inline some library routines
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xlibmil"
+ # Use optimized math routines
+ # (If you expect perfect errno behavior, do not use this)
+ # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
+ #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
+
+ if test "x$OPENJDK_TARGET_CPU" = xsparc; then
+ CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} -xmemalign=4s"
+ fi
+
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86)
+ C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
+ C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
+ C_O_FLAG_NONE="-xregs=no%frameptr"
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NONE="-xregs=no%frameptr"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
+ fi
+ ;;
+ sparc)
+ CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
+ CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
+ C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
+ C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0"
+ C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0"
+ C_O_FLAG_NONE=""
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
+ CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
+ CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
+ CXX_O_FLAG_NONE=""
+ ;;
+ esac
+
+ CFLAGS_DEBUG_SYMBOLS="-g -xs"
+ CXXFLAGS_DEBUG_SYMBOLS="-g0 -xs"
+ esac
+ ;;
+ CL )
+ C_O_FLAG_HIGHEST="-O2"
+ C_O_FLAG_HI="-O1"
+ C_O_FLAG_NORM="-O1"
+ C_O_FLAG_NONE="-Od"
+ CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
+ CXX_O_FLAG_HI="$C_O_FLAG_HI"
+ CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
+ ;;
+ esac
+
+ if test -z "$C_O_FLAG_HIGHEST"; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HI"
+ fi
+
+ if test -z "$CXX_O_FLAG_HIGHEST"; then
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI"
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags" >&5
$as_echo "$as_me: WARNING: Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags" >&2;}
-fi
-
-if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags" >&5
+ fi
+
+ if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags" >&5
$as_echo "$as_me: WARNING: Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags" >&2;}
-fi
-
-if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags" >&5
+ fi
+
+ if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags" >&5
$as_echo "$as_me: WARNING: Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags" >&2;}
-fi
+ fi
# Check whether --with-extra-cflags was given.
@@ -29120,128 +29118,128 @@
fi
-CFLAGS_JDK="${CFLAGS_JDK} $with_extra_cflags"
-CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
-LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
-
-# Hotspot needs these set in their legacy form
-LEGACY_EXTRA_CFLAGS=$with_extra_cflags
-LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
-LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
-
-
-
-
-
-###############################################################################
-#
-# Now setup the CFLAGS and LDFLAGS for the JDK build.
-# Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
-#
-case $COMPILER_NAME in
- gcc )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \
- -pipe \
- -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_TARGET_CPU_ARCH in
- arm )
- # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer nor strict-aliasing
- ;;
- * )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fno-omit-frame-pointer"
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
+ CFLAGS_JDK="${CFLAGS_JDK} $with_extra_cflags"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
+ LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
+
+ # Hotspot needs these set in their legacy form
+ LEGACY_EXTRA_CFLAGS=$with_extra_cflags
+ LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
+ LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
+
+
+
+
+
+ ###############################################################################
+ #
+ # Now setup the CFLAGS and LDFLAGS for the JDK build.
+ # Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
+ #
+ case $COMPILER_NAME in
+ gcc )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \
+ -pipe \
+ -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ arm )
+ # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
+ CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
;;
- esac
+ ppc )
+ # on ppc we don't prevent gcc to omit frame pointer nor strict-aliasing
+ ;;
+ * )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fno-omit-frame-pointer"
+ CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
;;
- ossc )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
- case $OPENJDK_TARGET_CPU_ARCH in
- x86 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_TARGET_CPU_LEGACY_LIB"
- CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
+ esac
+ ;;
+ ossc )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
;;
- esac
-
- CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
-
- LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
+ esac
+
+ CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
+
+ LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
+ LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
+ ;;
+ cl )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
+ -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
+ -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
+ -DWIN32 -DIAL"
+ case $OPENJDK_TARGET_CPU in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
;;
- cl )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
- -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
- -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
- -DWIN32 -DIAL"
- case $OPENJDK_TARGET_CPU in
- x86 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
- ;;
- x86_64 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
- ;;
- esac
+ x86_64 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
;;
-esac
-
-###############################################################################
-
-# Adjust flags according to debug level.
-case $DEBUG_LEVEL in
- fastdebug )
- CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
- CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
- C_O_FLAG_HI="$C_O_FLAG_NORM"
- C_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_HI="$CXX_O_FLAG_NORM"
- CXX_O_FLAG_NORM="$CXX_O_FLAG_NORM"
- JAVAC_FLAGS="$JAVAC_FLAGS -g"
- ;;
- slowdebug )
- CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
- CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
- C_O_FLAG_HI="$C_O_FLAG_NONE"
- C_O_FLAG_NORM="$C_O_FLAG_NONE"
- CXX_O_FLAG_HI="$CXX_O_FLAG_NONE"
- CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE"
- JAVAC_FLAGS="$JAVAC_FLAGS -g"
- ;;
-esac
-
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
-
-# The package path is used only on macosx?
-PACKAGE_PATH=/opt/local
-
-
-if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
+ esac
+ ;;
+ esac
+
+ ###############################################################################
+
+ # Adjust flags according to debug level.
+ case $DEBUG_LEVEL in
+ fastdebug )
+ CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
+ C_O_FLAG_HI="$C_O_FLAG_NORM"
+ C_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_HI="$CXX_O_FLAG_NORM"
+ CXX_O_FLAG_NORM="$CXX_O_FLAG_NORM"
+ JAVAC_FLAGS="$JAVAC_FLAGS -g"
+ ;;
+ slowdebug )
+ CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
+ C_O_FLAG_HI="$C_O_FLAG_NONE"
+ C_O_FLAG_NORM="$C_O_FLAG_NONE"
+ CXX_O_FLAG_HI="$CXX_O_FLAG_NONE"
+ CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE"
+ JAVAC_FLAGS="$JAVAC_FLAGS -g"
+ ;;
+ esac
+
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
+
+ # The package path is used only on macosx?
+ PACKAGE_PATH=/opt/local
+
+
+ if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
# The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
# Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
# (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
# Note: -Dmacro is the same as #define macro 1
- # -Dmacro= is the same as #define macro
+ # -Dmacro= is the same as #define macro
if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
- else
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
- fi
-else
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
+ else
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+ fi
+ else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN"
-fi
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DLINUX"
-fi
-if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DWINDOWS"
-fi
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DSOLARIS"
-fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE -D_DARWIN_UNLIMITED_SELECT"
# Setting these parameters makes it an error to link to macosx APIs that are
# newer than the given OS version and makes the linked binaries compatible even
@@ -29254,106 +29252,106 @@
# command line.
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MIN)) -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
LDFLAGS_JDK="$LDFLAGS_JDK -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
-fi
-if test "x$OPENJDK_TARGET_OS" = xbsd; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xbsd; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE"
-fi
-if test "x$DEBUG_LEVEL" = xrelease; then
+ fi
+ if test "x$DEBUG_LEVEL" = xrelease; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG"
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
- fi
-else
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
+ fi
+ else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG"
-fi
-
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
-
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
- -I${JDK_OUTPUTDIR}/include \
- -I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
- -I${JDK_TOPDIR}/src/share/javavm/export \
- -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
- -I${JDK_TOPDIR}/src/share/native/common \
- -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
-
-# The shared libraries are compiled using the picflag.
-CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
-CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA "
-
-# Executable flags
-CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK"
-CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK"
-
-# Now this is odd. The JDK native libraries have to link against libjvm.so
-# On 32-bit machines there is normally two distinct libjvm.so:s, client and server.
-# Which should we link to? Are we lucky enough that the binary api to the libjvm.so library
-# is identical for client and server? Yes. Which is picked at runtime (client or server)?
-# Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following
-# libraries will link to whatever is in memory. Yuck.
-#
-# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
-if test "x$COMPILER_NAME" = xcl; then
+ fi
+
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
+
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
+ -I${JDK_OUTPUTDIR}/include \
+ -I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
+ -I${JDK_TOPDIR}/src/share/javavm/export \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
+ -I${JDK_TOPDIR}/src/share/native/common \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
+
+ # The shared libraries are compiled using the picflag.
+ CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
+ CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA "
+
+ # Executable flags
+ CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK"
+ CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK"
+
+ # Now this is odd. The JDK native libraries have to link against libjvm.so
+ # On 32-bit machines there is normally two distinct libjvm.so:s, client and server.
+ # Which should we link to? Are we lucky enough that the binary api to the libjvm.so library
+ # is identical for client and server? Yes. Which is picked at runtime (client or server)?
+ # Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following
+ # libraries will link to whatever is in memory. Yuck.
+ #
+ # Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
+ if test "x$COMPILER_NAME" = xcl; then
LDFLAGS_JDK="$LDFLAGS_JDK -nologo -opt:ref -incremental:no"
if test "x$OPENJDK_TARGET_CPU" = xx86; then
- LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
+ LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
fi
# TODO: make -debug optional "--disable-full-debug-symbols"
LDFLAGS_JDK="$LDFLAGS_JDK -debug"
LDFLAGS_JDKLIB="${LDFLAGS_JDK} -dll -libpath:${JDK_OUTPUTDIR}/lib"
LDFLAGS_JDKLIB_SUFFIX=""
if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
- LDFLAGS_STACK_SIZE=1048576
- else
- LDFLAGS_STACK_SIZE=327680
+ LDFLAGS_STACK_SIZE=1048576
+ else
+ LDFLAGS_STACK_SIZE=327680
fi
LDFLAGS_JDKEXE="${LDFLAGS_JDK} /STACK:$LDFLAGS_STACK_SIZE"
-else
+ else
if test "x$COMPILER_NAME" = xgcc; then
- # If this is a --hash-style=gnu system, use --hash-style=both, why?
- HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'`
- if test -n "$HAS_GNU_HASH"; then
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker --hash-style=both "
- fi
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- # And since we now know that the linker is gnu, then add -z defs, to forbid
- # undefined symbols in object files.
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -z -Xlinker defs"
- if test "x$DEBUG_LEVEL" = "xrelease"; then
- # When building release libraries, tell the linker optimize them.
- # Should this be supplied to the OSS linker as well?
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -O1"
- fi
- fi
+ # If this is a --hash-style=gnu system, use --hash-style=both, why?
+ HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'`
+ if test -n "$HAS_GNU_HASH"; then
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker --hash-style=both "
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ # And since we now know that the linker is gnu, then add -z defs, to forbid
+ # undefined symbols in object files.
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -z -Xlinker defs"
+ if test "x$DEBUG_LEVEL" = "xrelease"; then
+ # When building release libraries, tell the linker optimize them.
+ # Should this be supplied to the OSS linker as well?
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -O1"
+ fi
+ fi
fi
LDFLAGS_JDKLIB="${LDFLAGS_JDK} $SHARED_LIBRARY_FLAGS \
- -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
# On some platforms (mac) the linker warns about non existing -L dirs.
# Add server first if available. Linking aginst client does not always produce the same results.
# Only add client dir if client is being built. Add minimal (note not minimal1) if only building minimal1.
# Default to server for other variants.
if test "x$JVM_VARIANT_SERVER" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
elif test "x$JVM_VARIANT_CLIENT" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client"
elif test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/minimal"
- else
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/minimal"
+ else
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
fi
LDFLAGS_JDKLIB_SUFFIX="-ljava -ljvm"
if test "x$COMPILER_NAME" = xossc; then
- LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
+ LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
fi
LDFLAGS_JDKEXE="${LDFLAGS_JDK}"
if test "x$OPENJDK_TARGET_OS" = xlinux; then
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
- fi
-fi
+ LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
+ fi
+ fi
@@ -29393,9 +29391,7 @@
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
- int i;
-
+int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
@@ -29421,9 +29417,7 @@
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
- int i;
-
+int i;
_ACEOF
if ac_fn_cxx_try_compile "$LINENO"; then :
@@ -29466,9 +29460,7 @@
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
- int i;
-
+int i;
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
@@ -29494,9 +29486,7 @@
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
- int i;
-
+int i;
_ACEOF
if ac_fn_cxx_try_compile "$LINENO"; then :
@@ -29525,64 +29515,64 @@
# Setup debug symbols (need objcopy from the toolchain for that)
-#
-# ENABLE_DEBUG_SYMBOLS
-# This must be done after the toolchain is setup, since we're looking at objcopy.
-#
-# Check whether --enable-debug-symbols was given.
+ #
+ # ENABLE_DEBUG_SYMBOLS
+ # This must be done after the toolchain is setup, since we're looking at objcopy.
+ #
+ # Check whether --enable-debug-symbols was given.
if test "${enable_debug_symbols+set}" = set; then :
enableval=$enable_debug_symbols;
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should generate debug symbols" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should generate debug symbols" >&5
$as_echo_n "checking if we should generate debug symbols... " >&6; }
-if test "x$enable_debug_symbols" = "xyes" && test "x$OBJCOPY" = x; then
- # explicit enabling of enable-debug-symbols and can't find objcopy
- # this is an error
- as_fn_error $? "Unable to find objcopy, cannot enable debug-symbols" "$LINENO" 5
-fi
-
-if test "x$enable_debug_symbols" = "xyes"; then
- ENABLE_DEBUG_SYMBOLS=true
-elif test "x$enable_debug_symbols" = "xno"; then
- ENABLE_DEBUG_SYMBOLS=false
-else
- # default on macosx is false
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ if test "x$enable_debug_symbols" = "xyes" && test "x$OBJCOPY" = x; then
+ # explicit enabling of enable-debug-symbols and can't find objcopy
+ # this is an error
+ as_fn_error $? "Unable to find objcopy, cannot enable debug-symbols" "$LINENO" 5
+ fi
+
+ if test "x$enable_debug_symbols" = "xyes"; then
+ ENABLE_DEBUG_SYMBOLS=true
+ elif test "x$enable_debug_symbols" = "xno"; then
ENABLE_DEBUG_SYMBOLS=false
- # Default is on if objcopy is found, otherwise off
- elif test "x$OBJCOPY" != x || test "x$OPENJDK_TARGET_OS" = xwindows; then
- ENABLE_DEBUG_SYMBOLS=true
- else
- ENABLE_DEBUG_SYMBOLS=false
- fi
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_DEBUG_SYMBOLS" >&5
+ else
+ # default on macosx is false
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ ENABLE_DEBUG_SYMBOLS=false
+ # Default is on if objcopy is found, otherwise off
+ elif test "x$OBJCOPY" != x || test "x$OPENJDK_TARGET_OS" = xwindows; then
+ ENABLE_DEBUG_SYMBOLS=true
+ else
+ ENABLE_DEBUG_SYMBOLS=false
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_DEBUG_SYMBOLS" >&5
$as_echo "$ENABLE_DEBUG_SYMBOLS" >&6; }
-#
-# ZIP_DEBUGINFO_FILES
-#
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should zip debug-info files" >&5
+ #
+ # ZIP_DEBUGINFO_FILES
+ #
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we should zip debug-info files" >&5
$as_echo_n "checking if we should zip debug-info files... " >&6; }
-# Check whether --enable-zip-debug-info was given.
+ # Check whether --enable-zip-debug-info was given.
if test "${enable_zip_debug_info+set}" = set; then :
enableval=$enable_zip_debug_info; enable_zip_debug_info="${enableval}"
else
enable_zip_debug_info="yes"
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${enable_zip_debug_info}" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${enable_zip_debug_info}" >&5
$as_echo "${enable_zip_debug_info}" >&6; }
-if test "x${enable_zip_debug_info}" = "xno"; then
- ZIP_DEBUGINFO_FILES=false
-else
- ZIP_DEBUGINFO_FILES=true
-fi
+ if test "x${enable_zip_debug_info}" = "xno"; then
+ ZIP_DEBUGINFO_FILES=false
+ else
+ ZIP_DEBUGINFO_FILES=true
+ fi
@@ -29598,28 +29588,28 @@
-###############################################################################
-#
-# OS specific settings that we never will need to probe.
-#
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ ###############################################################################
+ #
+ # OS specific settings that we never will need to probe.
+ #
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Linux?" >&5
$as_echo_n "checking what is not needed on Linux?... " >&6; }
PULSE_NOT_NEEDED=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: pulse" >&5
$as_echo "pulse" >&6; }
-fi
-
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Solaris?" >&5
$as_echo_n "checking what is not needed on Solaris?... " >&6; }
ALSA_NOT_NEEDED=yes
PULSE_NOT_NEEDED=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse" >&5
$as_echo "alsa pulse" >&6; }
-fi
-
-if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on Windows?" >&5
$as_echo_n "checking what is not needed on Windows?... " >&6; }
CUPS_NOT_NEEDED=yes
@@ -29628,9 +29618,9 @@
X11_NOT_NEEDED=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa cups pulse x11" >&5
$as_echo "alsa cups pulse x11" >&6; }
-fi
-
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on MacOSX?" >&5
$as_echo_n "checking what is not needed on MacOSX?... " >&6; }
ALSA_NOT_NEEDED=yes
@@ -29641,30 +29631,30 @@
# This will be adjusted below.
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse x11" >&5
$as_echo "alsa pulse x11" >&6; }
-fi
-
-if test "x$OPENJDK_TARGET_OS" = xbsd; then
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xbsd; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on bsd?" >&5
$as_echo_n "checking what is not needed on bsd?... " >&6; }
ALSA_NOT_NEEDED=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa" >&5
$as_echo "alsa" >&6; }
-fi
-
-if test "x$OPENJDK" = "xfalse"; then
+ fi
+
+ if test "x$OPENJDK" = "xfalse"; then
FREETYPE2_NOT_NEEDED=yes
-fi
-
-if test "x$SUPPORT_HEADFUL" = xno; then
+ fi
+
+ if test "x$SUPPORT_HEADFUL" = xno; then
X11_NOT_NEEDED=yes
-fi
-
-###############################################################################
-#
-# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
-# that uses this API.
-#
-# Check whether --enable-macosx-runtime-support was given.
+ fi
+
+ ###############################################################################
+ #
+ # Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
+ # that uses this API.
+ #
+ # Check whether --enable-macosx-runtime-support was given.
if test "${enable_macosx_runtime_support+set}" = set; then :
enableval=$enable_macosx_runtime_support; MACOSX_RUNTIME_SUPPORT="${enableval}"
else
@@ -29672,64 +29662,64 @@
fi
-USE_MACOSX_RUNTIME_SUPPORT=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for explicit Java runtime support in the OS" >&5
+ USE_MACOSX_RUNTIME_SUPPORT=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for explicit Java runtime support in the OS" >&5
$as_echo_n "checking for explicit Java runtime support in the OS... " >&6; }
-if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then
+ if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then
if test "x$MACOSX_RUNTIME_SUPPORT" != xno; then
- MACOSX_RUNTIME_SUPPORT=yes
- USE_MACOSX_RUNTIME_SUPPORT=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, does not need alsa freetype2 pulse and X11" >&5
+ MACOSX_RUNTIME_SUPPORT=yes
+ USE_MACOSX_RUNTIME_SUPPORT=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, does not need alsa freetype2 pulse and X11" >&5
$as_echo "yes, does not need alsa freetype2 pulse and X11" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, but explicitly disabled." >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes, but explicitly disabled." >&5
$as_echo "yes, but explicitly disabled." >&6; }
fi
-else
+ else
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
-fi
-
-if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what is not needed on an X11 build on MacOSX?" >&5
$as_echo_n "checking what is not needed on an X11 build on MacOSX?... " >&6; }
X11_NOT_NEEDED=
FREETYPE2_NOT_NEEDED=
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: alsa pulse" >&5
$as_echo "alsa pulse" >&6; }
-fi
-
-
-
-###############################################################################
-#
-# Check for X Windows
-#
-
-# Check if the user has specified sysroot, but not --x-includes or --x-libraries.
-# Make a simple check for the libraries at the sysroot, and setup --x-includes and
-# --x-libraries for the sysroot, if that seems to be correct.
-if test "x$SYS_ROOT" != "x/"; then
- if test "x$x_includes" = xNONE; then
- if test -f "$SYS_ROOT/usr/X11R6/include/X11/Xlib.h"; then
- x_includes="$SYS_ROOT/usr/X11R6/include"
- elif test -f "$SYS_ROOT/usr/include/X11/Xlib.h"; then
- x_includes="$SYS_ROOT/usr/include"
- fi
- fi
- if test "x$x_libraries" = xNONE; then
- if test -f "$SYS_ROOT/usr/X11R6/lib/libX11.so"; then
- x_libraries="$SYS_ROOT/usr/X11R6/lib"
- elif test "$SYS_ROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- x_libraries="$SYS_ROOT/usr/lib64"
- elif test -f "$SYS_ROOT/usr/lib/libX11.so"; then
- x_libraries="$SYS_ROOT/usr/lib"
- fi
- fi
-fi
-
-# Now let autoconf do it's magic
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
+ fi
+
+
+
+ ###############################################################################
+ #
+ # Check for X Windows
+ #
+
+ # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
+ # Make a simple check for the libraries at the sysroot, and setup --x-includes and
+ # --x-libraries for the sysroot, if that seems to be correct.
+ if test "x$SYS_ROOT" != "x/"; then
+ if test "x$x_includes" = xNONE; then
+ if test -f "$SYS_ROOT/usr/X11R6/include/X11/Xlib.h"; then
+ x_includes="$SYS_ROOT/usr/X11R6/include"
+ elif test -f "$SYS_ROOT/usr/include/X11/Xlib.h"; then
+ x_includes="$SYS_ROOT/usr/include"
+ fi
+ fi
+ if test "x$x_libraries" = xNONE; then
+ if test -f "$SYS_ROOT/usr/X11R6/lib/libX11.so"; then
+ x_libraries="$SYS_ROOT/usr/X11R6/lib"
+ elif test "$SYS_ROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ x_libraries="$SYS_ROOT/usr/lib64"
+ elif test -f "$SYS_ROOT/usr/lib/libX11.so"; then
+ x_libraries="$SYS_ROOT/usr/lib"
+ fi
+ fi
+ fi
+
+ # Now let autoconf do it's magic
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
$as_echo_n "checking for X... " >&6; }
@@ -29922,7 +29912,7 @@
$as_echo "libraries $x_libraries, headers $x_includes" >&6; }
fi
-if test "$no_x" = yes; then
+ if test "$no_x" = yes; then
# Not all programs may use this symbol, but it does not hurt to define it.
$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h
@@ -30413,83 +30403,85 @@
fi
-# AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
-# this doesn't make sense so we remove it.
-if test "x$COMPILE_TYPE" = xcross; then
- X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[^ ]*//g'`
-fi
-
-if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # x11 is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=x11
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
+ # this doesn't make sense so we remove it.
+ if test "x$COMPILE_TYPE" = xcross; then
+ X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[^ ]*//g'`
+ fi
+
+ if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # x11 is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=x11
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
as_fn_error $? "Could not find X11 libraries. $HELP_MSG" "$LINENO" 5
-fi
-
-# Some of the old makefiles require a setting of OPENWIN_HOME
-# Since the X11R6 directory has disappeared on later Linuxes,
-# we need to probe for it.
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ fi
+
+ # Some of the old makefiles require a setting of OPENWIN_HOME
+ # Since the X11R6 directory has disappeared on later Linuxes,
+ # we need to probe for it.
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
if test -d "$SYS_ROOT/usr/X11R6"; then
- OPENWIN_HOME="$SYS_ROOT/usr/X11R6"
+ OPENWIN_HOME="$SYS_ROOT/usr/X11R6"
elif test -d "$SYS_ROOT/usr/include/X11"; then
- OPENWIN_HOME="$SYS_ROOT/usr"
- fi
-fi
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ OPENWIN_HOME="$SYS_ROOT/usr"
+ fi
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
OPENWIN_HOME="/usr/openwin"
-fi
-
-
-
-#
-# Weird Sol10 something check...TODO change to try compile
-#
-if test "x${OPENJDK_TARGET_OS}" = xsolaris; then
- if test "`uname -r`" = "5.10"; then
- if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then
- X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS"
- fi
- fi
-fi
-
-ac_ext=c
+ fi
+
+
+
+ #
+ # Weird Sol10 something check...TODO change to try compile
+ #
+ if test "x${OPENJDK_TARGET_OS}" = xsolaris; then
+ if test "`uname -r`" = "5.10"; then
+ if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then
+ X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS"
+ fi
+ fi
+ fi
+
+ ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-OLD_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $X_CFLAGS"
-
-# Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
-for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h
+ OLD_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $X_CFLAGS"
+
+ # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
+ for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" " # include <X11/Xlib.h>
- # include <X11/Xutil.h>
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "
+ # include <X11/Xlib.h>
+ # include <X11/Xutil.h>
+
"
if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
@@ -30504,52 +30496,52 @@
done
-CFLAGS="$OLD_CFLAGS"
-ac_ext=cpp
+ CFLAGS="$OLD_CFLAGS"
+ ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # x11 is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=x11
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # x11 is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=x11
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
as_fn_error $? "Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG" "$LINENO" 5
-fi
-
-
-
-
-
-
-###############################################################################
-#
-# The common unix printing system cups is used to print from java.
-#
+ fi
+
+
+
+
+
+
+ ###############################################################################
+ #
+ # The common unix printing system cups is used to print from java.
+ #
# Check whether --with-cups was given.
if test "${with_cups+set}" = set; then :
@@ -30563,175 +30555,175 @@
fi
-if test "x$CUPS_NOT_NEEDED" = xyes; then
- if test "x${with_cups}" != x || test "x${with_cups_include}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cups not used, so --with-cups is ignored" >&5
+ if test "x$CUPS_NOT_NEEDED" = xyes; then
+ if test "x${with_cups}" != x || test "x${with_cups_include}" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cups not used, so --with-cups is ignored" >&5
$as_echo "$as_me: WARNING: cups not used, so --with-cups is ignored" >&2;}
- fi
- CUPS_CFLAGS=
-else
- CUPS_FOUND=no
-
- if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno; then
- as_fn_error $? "It is not possible to disable the use of cups. Remove the --without-cups option." "$LINENO" 5
- fi
-
- if test "x${with_cups}" != x; then
- CUPS_CFLAGS="-I${with_cups}/include"
- CUPS_FOUND=yes
- fi
- if test "x${with_cups_include}" != x; then
- CUPS_CFLAGS="-I${with_cups_include}"
- CUPS_FOUND=yes
- fi
- if test "x$CUPS_FOUND" = xno; then
-
-
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_cups_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_cups_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_cups_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The cups comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_cups}
- fi
- if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for cups" >&5
+ fi
+ CUPS_CFLAGS=
+ else
+ CUPS_FOUND=no
+
+ if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno; then
+ as_fn_error $? "It is not possible to disable the use of cups. Remove the --without-cups option." "$LINENO" 5
+ fi
+
+ if test "x${with_cups}" != x; then
+ CUPS_CFLAGS="-I${with_cups}/include"
+ CUPS_FOUND=yes
+ fi
+ if test "x${with_cups_include}" != x; then
+ CUPS_CFLAGS="-I${with_cups_include}"
+ CUPS_FOUND=yes
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+
+
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_cups_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_cups_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_cups_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The cups comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_cups}
+ fi
+ if test "x$resource" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for cups" >&5
$as_echo "$as_me: Using builddeps $resource for cups" >&6;}
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
-
-# cups is for example mymodule
-# $resource is for example libs/general/libmymod_1_2_3.zip
-# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
-# $with_builddeps_dir is for example /localhome/builddeps
-# depdir is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $resource`
- filebase=`echo $filename | sed 's/\.[^\.]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$with_builddeps_dir/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency cups from $with_builddeps_server/$resource and installing into $installdir" >&5
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+
+ # cups is for example mymodule
+ # $resource is for example libs/general/libmymod_1_2_3.zip
+ # $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $with_builddeps_dir is for example /localhome/builddeps
+ # depdir is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $resource`
+ filebase=`echo $filename | sed 's/\.[^\.]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$with_builddeps_dir/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency cups from $with_builddeps_server/$resource and installing into $installdir" >&5
$as_echo "$as_me: Downloading build dependency cups from $with_builddeps_server/$resource and installing into $installdir" >&6;}
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
- fi
- tmpfile=`mktemp $installdir/cups.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
- fi
-
- # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
- # $tmpfile is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $tmpfile $with_builddeps_server/$resource
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
- fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
- FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $tmpfile" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
- fi
-
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
- ;;
- esac
- fi
- if test -f $installdir/$filename.unpacked; then
- depdir=$installdir
- fi
-
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_cups_ROOT}
- thecflags=${builddep_cups_CFLAGS}
- thelibs=${builddep_cups_LIBS}
- if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency cups" "$LINENO" 5
- fi
- CUPS=$depdir
- if test "x$theroot" != x; then
- CUPS="$theroot"
- fi
- if test "x$thecflags" != x; then
- CUPS_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- CUPS_LIBS="$thelibs"
- fi
- CUPS_FOUND=yes
-
- fi
-
- fi
-
- fi
- if test "x$CUPS_FOUND" = xno; then
- # Are the cups headers installed in the default /usr/include location?
- for ac_header in cups/cups.h cups/ppd.h
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
+ fi
+ tmpfile=`mktemp $installdir/cups.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
+ fi
+
+ # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $tmpfile is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $tmpfile $with_builddeps_server/$resource
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
+ FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
+ fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $tmpfile" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
+ fi
+
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
+ fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ depdir=$installdir
+ fi
+
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_cups_ROOT}
+ thecflags=${builddep_cups_CFLAGS}
+ thelibs=${builddep_cups_LIBS}
+ if test "x$depdir" = x; then
+ as_fn_error $? "Could not download build dependency cups" "$LINENO" 5
+ fi
+ CUPS=$depdir
+ if test "x$theroot" != x; then
+ CUPS="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ CUPS_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ CUPS_LIBS="$thelibs"
+ fi
+ CUPS_FOUND=yes
+
+ fi
+
+ fi
+
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ # Are the cups headers installed in the default /usr/include location?
+ for ac_header in cups/cups.h cups/ppd.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
ac_fn_cxx_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
@@ -30739,70 +30731,73 @@
cat >>confdefs.h <<_ACEOF
#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
- CUPS_FOUND=yes
- CUPS_CFLAGS=
- DEFAULT_CUPS=yes
-fi
-
-done
-
- fi
- if test "x$CUPS_FOUND" = xno; then
- # Getting nervous now? Lets poke around for standard Solaris third-party
- # package installation locations.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cups headers" >&5
+
+ CUPS_FOUND=yes
+ CUPS_CFLAGS=
+ DEFAULT_CUPS=yes
+
+
+fi
+
+done
+
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ # Getting nervous now? Lets poke around for standard Solaris third-party
+ # package installation locations.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cups headers" >&5
$as_echo_n "checking for cups headers... " >&6; }
- if test -s /opt/sfw/cups/include/cups/cups.h; then
- # An SFW package seems to be installed!
- CUPS_FOUND=yes
- CUPS_CFLAGS="-I/opt/sfw/cups/include"
- elif test -s /opt/csw/include/cups/cups.h; then
- # A CSW package seems to be installed!
- CUPS_FOUND=yes
- CUPS_CFLAGS="-I/opt/csw/include"
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUPS_FOUND" >&5
+ if test -s /opt/sfw/cups/include/cups/cups.h; then
+ # An SFW package seems to be installed!
+ CUPS_FOUND=yes
+ CUPS_CFLAGS="-I/opt/sfw/cups/include"
+ elif test -s /opt/csw/include/cups/cups.h; then
+ # A CSW package seems to be installed!
+ CUPS_FOUND=yes
+ CUPS_CFLAGS="-I/opt/csw/include"
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CUPS_FOUND" >&5
$as_echo "$CUPS_FOUND" >&6; }
- fi
- if test "x$CUPS_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # cups is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=cups
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # cups is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=cups
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- as_fn_error $? "Could not find cups! $HELP_MSG " "$LINENO" 5
- fi
-fi
-
-
-
-
-
-
-###############################################################################
-#
-# The ubiquitous freetype2 library is used to render fonts.
-#
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ as_fn_error $? "Could not find cups! $HELP_MSG " "$LINENO" 5
+ fi
+ fi
+
+
+
+
+
+
+ ###############################################################################
+ #
+ # The ubiquitous freetype2 library is used to render fonts.
+ #
# Check whether --with-freetype was given.
if test "${with_freetype+set}" = set; then :
@@ -30810,21 +30805,21 @@
fi
-# If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree
-USING_SYSTEM_FT_LIB=false
-
-if test "x$FREETYPE2_NOT_NEEDED" = xyes; then
- if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: freetype not used, so --with-freetype is ignored" >&5
+ # If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree
+ USING_SYSTEM_FT_LIB=false
+
+ if test "x$FREETYPE2_NOT_NEEDED" = xyes; then
+ if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: freetype not used, so --with-freetype is ignored" >&5
$as_echo "$as_me: WARNING: freetype not used, so --with-freetype is ignored" >&2;}
- fi
- FREETYPE2_CFLAGS=
- FREETYPE2_LIBS=
- FREETYPE2_LIB_PATH=
-else
- FREETYPE2_FOUND=no
-
- if test "x$with_freetype" != x; then
+ fi
+ FREETYPE2_CFLAGS=
+ FREETYPE2_LIBS=
+ FREETYPE2_LIB_PATH=
+ else
+ FREETYPE2_FOUND=no
+
+ if test "x$with_freetype" != x; then
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -30947,186 +30942,186 @@
with_freetype="`cd "$path"; $THEPWDCMD -L`"
fi
- FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype"
- FREETYPE2_LIB_PATH="$with_freetype/lib"
- if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64 && test -d "$with_freetype/lib/amd64"; then
- FREETYPE2_LIBS="-L$with_freetype/lib/amd64 -lfreetype"
- FREETYPE2_LIB_PATH="$with_freetype/lib/amd64"
- fi
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPE2_LIBS="$with_freetype/lib/freetype.lib"
- fi
- FREETYPE2_CFLAGS="-I$with_freetype/include"
- if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then
- FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include"
- fi
- FREETYPE2_FOUND=yes
- if test "x$FREETYPE2_FOUND" = xyes; then
- # Verify that the directories exist
- if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then
- as_fn_error $? "Could not find the expected directories $with_freetype/lib and $with_freetype/include" "$LINENO" 5
- fi
- # List the contents of the lib.
- FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null`
- if test "x$FREETYPELIB" = x; then
- as_fn_error $? "Could not find libfreetype.so nor freetype.dll in $with_freetype/lib" "$LINENO" 5
- fi
- # Check one h-file
- if ! test -s "$with_freetype/include/ft2build.h"; then
- as_fn_error $? "Could not find $with_freetype/include/ft2build.h" "$LINENO" 5
- fi
- fi
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
-
-
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_freetype2_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The freetype2 comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_freetype2}
- fi
- if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for freetype2" >&5
+ FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype"
+ FREETYPE2_LIB_PATH="$with_freetype/lib"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64 && test -d "$with_freetype/lib/amd64"; then
+ FREETYPE2_LIBS="-L$with_freetype/lib/amd64 -lfreetype"
+ FREETYPE2_LIB_PATH="$with_freetype/lib/amd64"
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ FREETYPE2_LIBS="$with_freetype/lib/freetype.lib"
+ fi
+ FREETYPE2_CFLAGS="-I$with_freetype/include"
+ if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then
+ FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include"
+ fi
+ FREETYPE2_FOUND=yes
+ if test "x$FREETYPE2_FOUND" = xyes; then
+ # Verify that the directories exist
+ if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then
+ as_fn_error $? "Could not find the expected directories $with_freetype/lib and $with_freetype/include" "$LINENO" 5
+ fi
+ # List the contents of the lib.
+ FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null`
+ if test "x$FREETYPELIB" = x; then
+ as_fn_error $? "Could not find libfreetype.so nor freetype.dll in $with_freetype/lib" "$LINENO" 5
+ fi
+ # Check one h-file
+ if ! test -s "$with_freetype/include/ft2build.h"; then
+ as_fn_error $? "Could not find $with_freetype/include/ft2build.h" "$LINENO" 5
+ fi
+ fi
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+
+
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_freetype2_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_freetype2_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The freetype2 comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_freetype2}
+ fi
+ if test "x$resource" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for freetype2" >&5
$as_echo "$as_me: Using builddeps $resource for freetype2" >&6;}
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
-
-# freetype2 is for example mymodule
-# $resource is for example libs/general/libmymod_1_2_3.zip
-# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
-# $with_builddeps_dir is for example /localhome/builddeps
-# depdir is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $resource`
- filebase=`echo $filename | sed 's/\.[^\.]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$with_builddeps_dir/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency freetype2 from $with_builddeps_server/$resource and installing into $installdir" >&5
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+
+ # freetype2 is for example mymodule
+ # $resource is for example libs/general/libmymod_1_2_3.zip
+ # $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $with_builddeps_dir is for example /localhome/builddeps
+ # depdir is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $resource`
+ filebase=`echo $filename | sed 's/\.[^\.]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$with_builddeps_dir/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency freetype2 from $with_builddeps_server/$resource and installing into $installdir" >&5
$as_echo "$as_me: Downloading build dependency freetype2 from $with_builddeps_server/$resource and installing into $installdir" >&6;}
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
- fi
- tmpfile=`mktemp $installdir/freetype2.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
- fi
-
- # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
- # $tmpfile is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $tmpfile $with_builddeps_server/$resource
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
- fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
- FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $tmpfile" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
- fi
-
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
- ;;
- esac
- fi
- if test -f $installdir/$filename.unpacked; then
- depdir=$installdir
- fi
-
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_freetype2_ROOT}
- thecflags=${builddep_freetype2_CFLAGS}
- thelibs=${builddep_freetype2_LIBS}
- if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency freetype2" "$LINENO" 5
- fi
- FREETYPE2=$depdir
- if test "x$theroot" != x; then
- FREETYPE2="$theroot"
- fi
- if test "x$thecflags" != x; then
- FREETYPE2_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- FREETYPE2_LIBS="$thelibs"
- fi
- FREETYPE2_FOUND=yes
- else FREETYPE2_FOUND=no
-
- fi
- else FREETYPE2_FOUND=no
-
- fi
-
- USING_SYSTEM_FT_LIB=true
- fi
- if test "x$FREETYPE2_FOUND" = xno && test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPELOCATION="$PROGRAMFILES/GnuWin32"
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
+ fi
+ tmpfile=`mktemp $installdir/freetype2.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
+ fi
+
+ # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $tmpfile is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $tmpfile $with_builddeps_server/$resource
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
+ FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
+ fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $tmpfile" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
+ fi
+
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
+ fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ depdir=$installdir
+ fi
+
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_freetype2_ROOT}
+ thecflags=${builddep_freetype2_CFLAGS}
+ thelibs=${builddep_freetype2_LIBS}
+ if test "x$depdir" = x; then
+ as_fn_error $? "Could not download build dependency freetype2" "$LINENO" 5
+ fi
+ FREETYPE2=$depdir
+ if test "x$theroot" != x; then
+ FREETYPE2="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ FREETYPE2_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ FREETYPE2_LIBS="$thelibs"
+ fi
+ FREETYPE2_FOUND=yes
+ else FREETYPE2_FOUND=no
+
+ fi
+ else FREETYPE2_FOUND=no
+
+ fi
+
+ USING_SYSTEM_FT_LIB=true
+ fi
+ if test "x$FREETYPE2_FOUND" = xno && test "x$OPENJDK_TARGET_OS" = xwindows; then
+ FREETYPELOCATION="$PROGRAMFILES/GnuWin32"
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.cygwin"; then
@@ -31249,25 +31244,25 @@
FREETYPELOCATION="`cd "$path"; $THEPWDCMD -L`"
fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard windows locations" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard windows locations" >&5
$as_echo_n "checking for freetype in some standard windows locations... " >&6; }
- if test -s "$FREETYPELOCATION/include/ft2build.h" && test -d "$FREETYPELOCATION/include/freetype2/freetype"; then
- FREETYPE2_CFLAGS="-I$FREETYPELOCATION/include/freetype2 -I$FREETYPELOCATION/include"
- FREETYPE2_LIBS="$FREETYPELOCATION/lib/freetype.lib"
- FREETYPE2_LIB_PATH="$FREETYPELOCATION/lib"
- if ! test -s "$FREETYPE2_LIBS"; then
- as_fn_error $? "Could not find $FREETYPE2_LIBS" "$LINENO" 5
- fi
- if ! test -s "$FREETYPE2_LIB_PATH/freetype.dll"; then
- as_fn_error $? "Could not find $FREETYPE2_LIB_PATH/freetype.dll" "$LINENO" 5
- fi
- USING_SYSTEM_FT_LIB=true
- FREETYPE2_FOUND=yes
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE2_FOUND" >&5
+ if test -s "$FREETYPELOCATION/include/ft2build.h" && test -d "$FREETYPELOCATION/include/freetype2/freetype"; then
+ FREETYPE2_CFLAGS="-I$FREETYPELOCATION/include/freetype2 -I$FREETYPELOCATION/include"
+ FREETYPE2_LIBS="$FREETYPELOCATION/lib/freetype.lib"
+ FREETYPE2_LIB_PATH="$FREETYPELOCATION/lib"
+ if ! test -s "$FREETYPE2_LIBS"; then
+ as_fn_error $? "Could not find $FREETYPE2_LIBS" "$LINENO" 5
+ fi
+ if ! test -s "$FREETYPE2_LIB_PATH/freetype.dll"; then
+ as_fn_error $? "Could not find $FREETYPE2_LIB_PATH/freetype.dll" "$LINENO" 5
+ fi
+ USING_SYSTEM_FT_LIB=true
+ FREETYPE2_FOUND=yes
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE2_FOUND" >&5
$as_echo "$FREETYPE2_FOUND" >&6; }
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for FREETYPE2" >&5
@@ -31335,92 +31330,94 @@
$as_echo "yes" >&6; }
FREETYPE2_FOUND=yes
fi
- # On solaris, pkg_check adds -lz to freetype libs, which isn't necessary for us.
- FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's/-lz//g'`
- USING_SYSTEM_FT_LIB=true
- # 64-bit libs for Solaris x86 are installed in the amd64 subdirectory, change lib to lib/amd64
- if test "x$FREETYPE2_FOUND" = xyes && test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's?/lib?/lib/amd64?g'`
- fi
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard locations" >&5
+ # On solaris, pkg_check adds -lz to freetype libs, which isn't necessary for us.
+ FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's/-lz//g'`
+ USING_SYSTEM_FT_LIB=true
+ # 64-bit libs for Solaris x86 are installed in the amd64 subdirectory, change lib to lib/amd64
+ if test "x$FREETYPE2_FOUND" = xyes && test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's?/lib?/lib/amd64?g'`
+ fi
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for freetype in some standard locations" >&5
$as_echo_n "checking for freetype in some standard locations... " >&6; }
- if test -s $SYS_ROOT/usr/X11/include/ft2build.h && test -d $SYS_ROOT/usr/X11/include/freetype2/freetype; then
- DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/X11/include/freetype2 -I$SYS_ROOT/usr/X11/include"
- DEFAULT_FREETYPE_LIBS="-L$SYS_ROOT/usr/X11/lib -lfreetype"
- fi
- if test -s $SYS_ROOT/usr/include/ft2build.h && test -d $SYS_ROOT/usr/include/freetype2/freetype; then
- DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/include/freetype2"
- DEFAULT_FREETYPE_LIBS="-lfreetype"
- fi
-
- PREV_CXXCFLAGS="$CXXFLAGS"
- PREV_LDFLAGS="$LDFLAGS"
- CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS"
- LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include<ft2build.h>
- #include FT_FREETYPE_H
- int main() { return 0; }
+ if test -s $SYS_ROOT/usr/X11/include/ft2build.h && test -d $SYS_ROOT/usr/X11/include/freetype2/freetype; then
+ DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/X11/include/freetype2 -I$SYS_ROOT/usr/X11/include"
+ DEFAULT_FREETYPE_LIBS="-L$SYS_ROOT/usr/X11/lib -lfreetype"
+ fi
+ if test -s $SYS_ROOT/usr/include/ft2build.h && test -d $SYS_ROOT/usr/include/freetype2/freetype; then
+ DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/include/freetype2"
+ DEFAULT_FREETYPE_LIBS="-lfreetype"
+ fi
+
+ PREV_CXXCFLAGS="$CXXFLAGS"
+ PREV_LDFLAGS="$LDFLAGS"
+ CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS"
+ LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #include<ft2build.h>
+ #include FT_FREETYPE_H
+ int main() { return 0; }
_ACEOF
if ac_fn_cxx_try_link "$LINENO"; then :
- # Yes, the default cflags and libs did the trick.
- FREETYPE2_FOUND=yes
- FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS"
- FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS"
-
-else
-
- FREETYPE2_FOUND=no
+ # Yes, the default cflags and libs did the trick.
+ FREETYPE2_FOUND=yes
+ FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS"
+ FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS"
+
+else
+
+ FREETYPE2_FOUND=no
+
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- CXXCFLAGS="$PREV_CXXFLAGS"
- LDFLAGS="$PREV_LDFLAGS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE2_FOUND" >&5
+ CXXCFLAGS="$PREV_CXXFLAGS"
+ LDFLAGS="$PREV_LDFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FREETYPE2_FOUND" >&5
$as_echo "$FREETYPE2_FOUND" >&6; }
- USING_SYSTEM_FT_LIB=true
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # freetype2 is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=freetype2
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ USING_SYSTEM_FT_LIB=true
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # freetype2 is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=freetype2
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- as_fn_error $? "Could not find freetype2! $HELP_MSG " "$LINENO" 5
- fi
-
- if test "x$OPENJDK_TARGET_OS" != xwindows; then
- # AC_CHECK_LIB does not support use of cl.exe
- PREV_LDFLAGS="$LDFLAGS"
- LDFLAGS="$FREETYPE2_LIBS"
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FT_Init_FreeType in -lfreetype" >&5
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ as_fn_error $? "Could not find freetype2! $HELP_MSG " "$LINENO" 5
+ fi
+
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # AC_CHECK_LIB does not support use of cl.exe
+ PREV_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$FREETYPE2_LIBS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for FT_Init_FreeType in -lfreetype" >&5
$as_echo_n "checking for FT_Init_FreeType in -lfreetype... " >&6; }
if ${ac_cv_lib_freetype_FT_Init_FreeType+:} false; then :
$as_echo_n "(cached) " >&6
@@ -31462,22 +31459,21 @@
as_fn_error $? "Could not find freetype2! $HELP_MSG " "$LINENO" 5
fi
- LDFLAGS="$PREV_LDFLAGS"
- fi
-fi
-
-
-
-
-
-
-
-
-
-###############################################################################
-#
-# Check for alsa headers and libraries. Used on Linux/GNU systems.
-#
+ LDFLAGS="$PREV_LDFLAGS"
+ fi
+ fi
+
+
+
+
+
+
+
+
+ ###############################################################################
+ #
+ # Check for alsa headers and libraries. Used on Linux/GNU systems.
+ #
# Check whether --with-alsa was given.
if test "${with_alsa+set}" = set; then :
@@ -31497,181 +31493,181 @@
fi
-if test "x$ALSA_NOT_NEEDED" = xyes; then
- if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: alsa not used, so --with-alsa is ignored" >&5
+ if test "x$ALSA_NOT_NEEDED" = xyes; then
+ if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: alsa not used, so --with-alsa is ignored" >&5
$as_echo "$as_me: WARNING: alsa not used, so --with-alsa is ignored" >&2;}
- fi
- ALSA_CFLAGS=
- ALSA_LIBS=
-else
- ALSA_FOUND=no
-
- if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then
- as_fn_error $? "It is not possible to disable the use of alsa. Remove the --without-alsa option." "$LINENO" 5
- fi
-
- if test "x${with_alsa}" != x; then
- ALSA_LIBS="-L${with_alsa}/lib -lalsa"
- ALSA_CFLAGS="-I${with_alsa}/include"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_include}" != x; then
- ALSA_CFLAGS="-I${with_alsa_include}"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_lib}" != x; then
- ALSA_LIBS="-L${with_alsa_lib} -lalsa"
- ALSA_FOUND=yes
- fi
- if test "x$ALSA_FOUND" = xno; then
-
-
- if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
- # Source the builddeps file again, to make sure it uses the latest variables!
- . $builddepsfile
- # Look for a target and build machine specific resource!
- eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
- if test "x$resource" = x; then
- # Ok, lets instead look for a target specific resource
- eval resource=\${builddep_alsa_TARGET_${rewritten_target_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a build specific resource
- eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}}
- fi
- if test "x$resource" = x; then
- # Ok, lets instead look for a generic resource
- # (The alsa comes from M4 and not the shell, thus no need for eval here.)
- resource=${builddep_alsa}
- fi
- if test "x$resource" != x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for alsa" >&5
+ fi
+ ALSA_CFLAGS=
+ ALSA_LIBS=
+ else
+ ALSA_FOUND=no
+
+ if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then
+ as_fn_error $? "It is not possible to disable the use of alsa. Remove the --without-alsa option." "$LINENO" 5
+ fi
+
+ if test "x${with_alsa}" != x; then
+ ALSA_LIBS="-L${with_alsa}/lib -lalsa"
+ ALSA_CFLAGS="-I${with_alsa}/include"
+ ALSA_FOUND=yes
+ fi
+ if test "x${with_alsa_include}" != x; then
+ ALSA_CFLAGS="-I${with_alsa_include}"
+ ALSA_FOUND=yes
+ fi
+ if test "x${with_alsa_lib}" != x; then
+ ALSA_LIBS="-L${with_alsa_lib} -lalsa"
+ ALSA_FOUND=yes
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+
+
+ if test "x$with_builddeps_server" != x || test "x$with_builddeps_conf" != x; then
+ # Source the builddeps file again, to make sure it uses the latest variables!
+ . $builddepsfile
+ # Look for a target and build machine specific resource!
+ eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}_TARGET_${rewritten_target_var}}
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a target specific resource
+ eval resource=\${builddep_alsa_TARGET_${rewritten_target_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a build specific resource
+ eval resource=\${builddep_alsa_BUILD_${rewritten_build_var}}
+ fi
+ if test "x$resource" = x; then
+ # Ok, lets instead look for a generic resource
+ # (The alsa comes from M4 and not the shell, thus no need for eval here.)
+ resource=${builddep_alsa}
+ fi
+ if test "x$resource" != x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Using builddeps $resource for alsa" >&5
$as_echo "$as_me: Using builddeps $resource for alsa" >&6;}
- # If the resource in the builddeps.conf file is an existing directory,
- # for example /java/linux/cups
- if test -d ${resource}; then
- depdir=${resource}
- else
-
-# alsa is for example mymodule
-# $resource is for example libs/general/libmymod_1_2_3.zip
-# $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
-# $with_builddeps_dir is for example /localhome/builddeps
-# depdir is the name of the variable into which we store the depdir, eg MYMOD
-# Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
-# unzip into the directory: /localhome/builddeps/libmymod_1_2_3
- filename=`basename $resource`
- filebase=`echo $filename | sed 's/\.[^\.]*$//'`
- filebase=${filename%%.*}
- extension=${filename#*.}
- installdir=$with_builddeps_dir/$filebase
- if test ! -f $installdir/$filename.unpacked; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency alsa from $with_builddeps_server/$resource and installing into $installdir" >&5
+ # If the resource in the builddeps.conf file is an existing directory,
+ # for example /java/linux/cups
+ if test -d ${resource}; then
+ depdir=${resource}
+ else
+
+ # alsa is for example mymodule
+ # $resource is for example libs/general/libmymod_1_2_3.zip
+ # $with_builddeps_server is for example ftp://mybuilddeps.myserver.com/builddeps
+ # $with_builddeps_dir is for example /localhome/builddeps
+ # depdir is the name of the variable into which we store the depdir, eg MYMOD
+ # Will download ftp://mybuilddeps.myserver.com/builddeps/libs/general/libmymod_1_2_3.zip and
+ # unzip into the directory: /localhome/builddeps/libmymod_1_2_3
+ filename=`basename $resource`
+ filebase=`echo $filename | sed 's/\.[^\.]*$//'`
+ filebase=${filename%%.*}
+ extension=${filename#*.}
+ installdir=$with_builddeps_dir/$filebase
+ if test ! -f $installdir/$filename.unpacked; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Downloading build dependency alsa from $with_builddeps_server/$resource and installing into $installdir" >&5
$as_echo "$as_me: Downloading build dependency alsa from $with_builddeps_server/$resource and installing into $installdir" >&6;}
- if test ! -d $installdir; then
- mkdir -p $installdir
- fi
- if test ! -d $installdir; then
- as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
- fi
- tmpfile=`mktemp $installdir/alsa.XXXXXXXXX`
- touch $tmpfile
- if test ! -f $tmpfile; then
- as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
- fi
-
- # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
- # $tmpfile is the local file name for the downloaded file.
- VALID_TOOL=no
- if test "x$BDEPS_FTP" = xwget; then
- VALID_TOOL=yes
- wget -O $tmpfile $with_builddeps_server/$resource
- fi
- if test "x$BDEPS_FTP" = xlftp; then
- VALID_TOOL=yes
- lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
- fi
- if test "x$BDEPS_FTP" = xftp; then
- VALID_TOOL=yes
- FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
- FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
- FTPUSERPWD=${FTPSERVER%%@*}
- if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
- FTPUSER=${userpwd%%:*}
- FTPPWD=${userpwd#*@}
- FTPSERVER=${FTPSERVER#*@}
- else
- FTPUSER=ftp
- FTPPWD=ftp
- fi
- # the "pass" command does not work on some
- # ftp clients (read ftp.exe) but if it works,
- # passive mode is better!
- (\
- echo "user $FTPUSER $FTPPWD" ;\
- echo "pass" ;\
- echo "bin" ;\
- echo "get $FTPPATH $tmpfile" ;\
- ) | ftp -in $FTPSERVER
- fi
- if test "x$VALID_TOOL" != xyes; then
- as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
- fi
-
- mv $tmpfile $installdir/$filename
- if test ! -s $installdir/$filename; then
- as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
- fi
- case "$extension" in
- zip) echo "Unzipping $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
- ;;
- tar.gz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- tgz) echo "Untaring $installdir/$filename..."
- (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
- ;;
- *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
- ;;
- esac
- fi
- if test -f $installdir/$filename.unpacked; then
- depdir=$installdir
- fi
-
- fi
- # Source the builddeps file again, because in the previous command, the depdir
- # was updated to point at the current build dependency install directory.
- . $builddepsfile
- # Now extract variables from the builddeps.conf files.
- theroot=${builddep_alsa_ROOT}
- thecflags=${builddep_alsa_CFLAGS}
- thelibs=${builddep_alsa_LIBS}
- if test "x$depdir" = x; then
- as_fn_error $? "Could not download build dependency alsa" "$LINENO" 5
- fi
- ALSA=$depdir
- if test "x$theroot" != x; then
- ALSA="$theroot"
- fi
- if test "x$thecflags" != x; then
- ALSA_CFLAGS="$thecflags"
- fi
- if test "x$thelibs" != x; then
- ALSA_LIBS="$thelibs"
- fi
- ALSA_FOUND=yes
- else ALSA_FOUND=no
-
- fi
- else ALSA_FOUND=no
-
- fi
-
- fi
- if test "x$ALSA_FOUND" = xno; then
+ if test ! -d $installdir; then
+ mkdir -p $installdir
+ fi
+ if test ! -d $installdir; then
+ as_fn_error $? "Could not create directory $installdir" "$LINENO" 5
+ fi
+ tmpfile=`mktemp $installdir/alsa.XXXXXXXXX`
+ touch $tmpfile
+ if test ! -f $tmpfile; then
+ as_fn_error $? "Could not create files in directory $installdir" "$LINENO" 5
+ fi
+
+ # $with_builddeps_server/$resource is the ftp://abuilddeps.server.com/libs/cups.zip
+ # $tmpfile is the local file name for the downloaded file.
+ VALID_TOOL=no
+ if test "x$BDEPS_FTP" = xwget; then
+ VALID_TOOL=yes
+ wget -O $tmpfile $with_builddeps_server/$resource
+ fi
+ if test "x$BDEPS_FTP" = xlftp; then
+ VALID_TOOL=yes
+ lftp -c "get $with_builddeps_server/$resource -o $tmpfile"
+ fi
+ if test "x$BDEPS_FTP" = xftp; then
+ VALID_TOOL=yes
+ FTPSERVER=`echo $with_builddeps_server/$resource | cut -f 3 -d '/'`
+ FTPPATH=`echo $with_builddeps_server/$resource | cut -f 4- -d '/'`
+ FTPUSERPWD=${FTPSERVER%%@*}
+ if test "x$FTPSERVER" != "x$FTPUSERPWD"; then
+ FTPUSER=${userpwd%%:*}
+ FTPPWD=${userpwd#*@}
+ FTPSERVER=${FTPSERVER#*@}
+ else
+ FTPUSER=ftp
+ FTPPWD=ftp
+ fi
+ # the "pass" command does not work on some
+ # ftp clients (read ftp.exe) but if it works,
+ # passive mode is better!
+ ( \
+ echo "user $FTPUSER $FTPPWD" ; \
+ echo "pass" ; \
+ echo "bin" ; \
+ echo "get $FTPPATH $tmpfile" ; \
+ ) | ftp -in $FTPSERVER
+ fi
+ if test "x$VALID_TOOL" != xyes; then
+ as_fn_error $? "I do not know how to use the tool: $BDEPS_FTP" "$LINENO" 5
+ fi
+
+ mv $tmpfile $installdir/$filename
+ if test ! -s $installdir/$filename; then
+ as_fn_error $? "Could not download $with_builddeps_server/$resource" "$LINENO" 5
+ fi
+ case "$extension" in
+ zip) echo "Unzipping $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; $BDEPS_UNZIP $installdir/$filename > /dev/null && touch $installdir/$filename.unpacked)
+ ;;
+ tar.gz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ tgz) echo "Untaring $installdir/$filename..."
+ (cd $installdir ; rm -f $installdir/$filename.unpacked ; tar xzf $installdir/$filename && touch $installdir/$filename.unpacked)
+ ;;
+ *) as_fn_error $? "Cannot handle build depency archive with extension $extension" "$LINENO" 5
+ ;;
+ esac
+ fi
+ if test -f $installdir/$filename.unpacked; then
+ depdir=$installdir
+ fi
+
+ fi
+ # Source the builddeps file again, because in the previous command, the depdir
+ # was updated to point at the current build dependency install directory.
+ . $builddepsfile
+ # Now extract variables from the builddeps.conf files.
+ theroot=${builddep_alsa_ROOT}
+ thecflags=${builddep_alsa_CFLAGS}
+ thelibs=${builddep_alsa_LIBS}
+ if test "x$depdir" = x; then
+ as_fn_error $? "Could not download build dependency alsa" "$LINENO" 5
+ fi
+ ALSA=$depdir
+ if test "x$theroot" != x; then
+ ALSA="$theroot"
+ fi
+ if test "x$thecflags" != x; then
+ ALSA_CFLAGS="$thecflags"
+ fi
+ if test "x$thelibs" != x; then
+ ALSA_LIBS="$thelibs"
+ fi
+ ALSA_FOUND=yes
+ else ALSA_FOUND=no
+
+ fi
+ else ALSA_FOUND=no
+
+ fi
+
+ fi
+ if test "x$ALSA_FOUND" = xno; then
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ALSA" >&5
@@ -31739,69 +31735,70 @@
$as_echo "yes" >&6; }
ALSA_FOUND=yes
fi
- fi
- if test "x$ALSA_FOUND" = xno; then
- for ac_header in alsa/asoundlib.h
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+ for ac_header in alsa/asoundlib.h
do :
ac_fn_cxx_check_header_mongrel "$LINENO" "alsa/asoundlib.h" "ac_cv_header_alsa_asoundlib_h" "$ac_includes_default"
if test "x$ac_cv_header_alsa_asoundlib_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
#define HAVE_ALSA_ASOUNDLIB_H 1
_ACEOF
- ALSA_FOUND=yes
- ALSA_CFLAGS=-Iignoreme
- ALSA_LIBS=-lasound
- DEFAULT_ALSA=yes
+
+ ALSA_FOUND=yes
+ ALSA_CFLAGS=-Iignoreme
+ ALSA_LIBS=-lasound
+ DEFAULT_ALSA=yes
+
else
ALSA_FOUND=no
fi
done
- fi
- if test "x$ALSA_FOUND" = xno; then
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # alsa is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=alsa
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # alsa is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=alsa
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- as_fn_error $? "Could not find alsa! $HELP_MSG " "$LINENO" 5
- fi
-fi
-
-
-
-
-
-
-
-###############################################################################
-#
-# Check for the jpeg library
-#
-
-USE_EXTERNAL_LIBJPEG=true
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -ljpeg" >&5
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ as_fn_error $? "Could not find alsa! $HELP_MSG " "$LINENO" 5
+ fi
+ fi
+
+
+
+
+
+
+ ###############################################################################
+ #
+ # Check for the jpeg library
+ #
+
+ USE_EXTERNAL_LIBJPEG=true
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -ljpeg" >&5
$as_echo_n "checking for main in -ljpeg... " >&6; }
if ${ac_cv_lib_jpeg_main+:} false; then :
$as_echo_n "(cached) " >&6
@@ -31840,17 +31837,17 @@
else
USE_EXTERNAL_LIBJPEG=false
- { $as_echo "$as_me:${as_lineno-$LINENO}: Will use jpeg decoder bundled with the OpenJDK source" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Will use jpeg decoder bundled with the OpenJDK source" >&5
$as_echo "$as_me: Will use jpeg decoder bundled with the OpenJDK source" >&6;}
fi
-###############################################################################
-#
-# Check for the gif library
-#
+ ###############################################################################
+ #
+ # Check for the gif library
+ #
# Check whether --with-giflib was given.
@@ -31860,25 +31857,25 @@
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for which giflib to use" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which giflib to use" >&5
$as_echo_n "checking for which giflib to use... " >&6; }
-# default is bundled
-DEFAULT_GIFLIB=bundled
-
-#
-# if user didn't specify, use DEFAULT_GIFLIB
-#
-if test "x${with_giflib}" = "x"; then
+ # default is bundled
+ DEFAULT_GIFLIB=bundled
+
+ #
+ # if user didn't specify, use DEFAULT_GIFLIB
+ #
+ if test "x${with_giflib}" = "x"; then
with_giflib=${DEFAULT_GIFLIB}
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_giflib}" >&5
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_giflib}" >&5
$as_echo "${with_giflib}" >&6; }
-if test "x${with_giflib}" = "xbundled"; then
+ if test "x${with_giflib}" = "xbundled"; then
USE_EXTERNAL_LIBGIF=false
-elif test "x${with_giflib}" = "xsystem"; then
+ elif test "x${with_giflib}" = "xsystem"; then
ac_fn_cxx_check_header_mongrel "$LINENO" "gif_lib.h" "ac_cv_header_gif_lib_h" "$ac_includes_default"
if test "x$ac_cv_header_gif_lib_h" = xyes; then :
@@ -31936,15 +31933,15 @@
USE_EXTERNAL_LIBGIF=true
-else
+ else
as_fn_error $? "Invalid value of --with-giflib: ${with_giflib}, use 'system' or 'bundled'" "$LINENO" 5
-fi
-
-
-###############################################################################
-#
-# Check for the zlib library
-#
+ fi
+
+
+ ###############################################################################
+ #
+ # Check for the zlib library
+ #
# Check whether --with-zlib was given.
@@ -31953,7 +31950,7 @@
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for compress in -lz" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for compress in -lz" >&5
$as_echo_n "checking for compress in -lz... " >&6; }
if ${ac_cv_lib_z_compress+:} false; then :
$as_echo_n "(cached) " >&6
@@ -31996,62 +31993,62 @@
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for which zlib to use" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for which zlib to use" >&5
$as_echo_n "checking for which zlib to use... " >&6; }
-DEFAULT_ZLIB=bundled
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
-#
-# On macosx default is system...on others default is
-#
+ DEFAULT_ZLIB=bundled
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ #
+ # On macosx default is system...on others default is
+ #
DEFAULT_ZLIB=system
-fi
-
-if test "x${ZLIB_FOUND}" != "xyes"; then
-#
-# If we don't find any system...set default to bundled
-#
+ fi
+
+ if test "x${ZLIB_FOUND}" != "xyes"; then
+ #
+ # If we don't find any system...set default to bundled
+ #
DEFAULT_ZLIB=bundled
-fi
-
-#
-# If user didn't specify, use DEFAULT_ZLIB
-#
-if test "x${with_zlib}" = "x"; then
+ fi
+
+ #
+ # If user didn't specify, use DEFAULT_ZLIB
+ #
+ if test "x${with_zlib}" = "x"; then
with_zlib=${DEFAULT_ZLIB}
-fi
-
-if test "x${with_zlib}" = "xbundled"; then
+ fi
+
+ if test "x${with_zlib}" = "xbundled"; then
USE_EXTERNAL_LIBZ=false
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: bundled" >&5
$as_echo "bundled" >&6; }
-elif test "x${with_zlib}" = "xsystem"; then
+ elif test "x${with_zlib}" = "xsystem"; then
if test "x${ZLIB_FOUND}" = "xyes"; then
- USE_EXTERNAL_LIBZ=true
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system" >&5
+ USE_EXTERNAL_LIBZ=true
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: system" >&5
$as_echo "system" >&6; }
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: system not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: system not found" >&5
$as_echo "system not found" >&6; }
- as_fn_error $? "--with-zlib=system specified, but no zlib found!" "$LINENO" 5
- fi
-else
+ as_fn_error $? "--with-zlib=system specified, but no zlib found!" "$LINENO" 5
+ fi
+ else
as_fn_error $? "Invalid value for --with-zlib: ${with_zlib}, use 'system' or 'bundled'" "$LINENO" 5
-fi
-
-
-
-###############################################################################
-LIBZIP_CAN_USE_MMAP=true
-
-
-
-###############################################################################
-#
-# Check if altzone exists in time.h
-#
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ fi
+
+
+
+ ###############################################################################
+ LIBZIP_CAN_USE_MMAP=true
+
+
+
+ ###############################################################################
+ #
+ # Check if altzone exists in time.h
+ #
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <time.h>
int
@@ -32069,18 +32066,18 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-if test "x$has_altzone" = xyes; then
+ if test "x$has_altzone" = xyes; then
$as_echo "#define HAVE_ALTZONE 1" >>confdefs.h
-fi
-
-###############################################################################
-#
-# Check the maths library
-#
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+ fi
+
+ ###############################################################################
+ #
+ # Check the maths library
+ #
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
$as_echo_n "checking for cos in -lm... " >&6; }
if ${ac_cv_lib_m_cos+:} false; then :
$as_echo_n "(cached) " >&6
@@ -32125,20 +32122,21 @@
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: Maths library was not found" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Maths library was not found" >&5
$as_echo "$as_me: Maths library was not found" >&6;}
-fi
-
-
-
-###############################################################################
-#
-# Check for libdl.so
-
-save_LIBS="$LIBS"
-LIBS=""
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+
+fi
+
+
+
+ ###############################################################################
+ #
+ # Check for libdl.so
+
+ save_LIBS="$LIBS"
+ LIBS=""
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
$as_echo_n "(cached) " >&6
@@ -32183,25 +32181,24 @@
fi
-LIBDL="$LIBS"
-
-LIBS="$save_LIBS"
-
-
-
-###############################################################################
-#
-# statically link libstdc++ before C++ ABI is stablized on Linux unless
-# dynamic build is configured on command line.
-#
+ LIBDL="$LIBS"
+
+ LIBS="$save_LIBS"
+
+
+ ###############################################################################
+ #
+ # statically link libstdc++ before C++ ABI is stablized on Linux unless
+ # dynamic build is configured on command line.
+ #
# Check whether --with-stdc++lib was given.
if test "${with_stdc__lib+set}" = set; then :
withval=$with_stdc__lib;
- if test "x$with_stdc__lib" != xdynamic && test "x$with_stdc__lib" != xstatic \
- && test "x$with_stdc__lib" != xdefault; then
- as_fn_error $? "Bad parameter value --with-stdc++lib=$with_stdc__lib!" "$LINENO" 5
- fi
+ if test "x$with_stdc__lib" != xdynamic && test "x$with_stdc__lib" != xstatic \
+ && test "x$with_stdc__lib" != xdefault; then
+ as_fn_error $? "Bad parameter value --with-stdc++lib=$with_stdc__lib!" "$LINENO" 5
+ fi
else
with_stdc__lib=default
@@ -32209,7 +32206,7 @@
fi
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
# Test if -lstdc++ works.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if dynamic link of stdc++ is possible" >&5
$as_echo_n "checking if dynamic link of stdc++ is possible... " >&6; }
@@ -32293,15 +32290,15 @@
$as_echo "$has_static_libstdcxx" >&6; }
if test "x$has_static_libstdcxx" = xno && test "x$has_dynamic_libstdcxx" = xno; then
- as_fn_error $? "Cannot link to stdc++, neither dynamically nor statically!" "$LINENO" 5
+ as_fn_error $? "Cannot link to stdc++, neither dynamically nor statically!" "$LINENO" 5
fi
if test "x$with_stdc__lib" = xstatic && test "x$has_static_libstdcxx" = xno; then
- as_fn_error $? "Static linking of libstdc++ was not possible!" "$LINENO" 5
+ as_fn_error $? "Static linking of libstdc++ was not possible!" "$LINENO" 5
fi
if test "x$with_stdc__lib" = xdynamic && test "x$has_dynamic_libstdcxx" = xno; then
- as_fn_error $? "Dynamic linking of libstdc++ was not possible!" "$LINENO" 5
+ as_fn_error $? "Dynamic linking of libstdc++ was not possible!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libstdc++" >&5
@@ -32309,22 +32306,22 @@
# If dynamic was requested, it's available since it would fail above otherwise.
# If dynamic wasn't requested, go with static unless it isn't available.
if test "x$with_stdc__lib" = xdynamic || test "x$has_static_libstdcxx" = xno || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
- LIBCXX="$LIBCXX -lstdc++"
- LDCXX="$CXX"
- STATIC_CXX_SETTING="STATIC_CXX=false"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: dynamic" >&5
+ LIBCXX="$LIBCXX -lstdc++"
+ LDCXX="$CXX"
+ STATIC_CXX_SETTING="STATIC_CXX=false"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: dynamic" >&5
$as_echo "dynamic" >&6; }
else
- LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS"
- LDCXX="$CC"
- STATIC_CXX_SETTING="STATIC_CXX=true"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5
+ LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS"
+ LDCXX="$CC"
+ STATIC_CXX_SETTING="STATIC_CXX=true"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: static" >&5
$as_echo "static" >&6; }
fi
-fi
-
-
-if test "x$JVM_VARIANT_ZERO" = xtrue || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ fi
+
+
+ if test "x$JVM_VARIANT_ZERO" = xtrue || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
# Figure out LIBFFI_CFLAGS and LIBFFI_LIBS
pkg_failed=no
@@ -32413,9 +32410,9 @@
:
fi
-fi
-
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ fi
+
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
# Extract the first word of "llvm-config", so it can be a program name with args.
set dummy llvm-config; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
@@ -32455,7 +32452,7 @@
if test "x$LLVM_CONFIG" != xllvm-config; then
- as_fn_error $? "llvm-config not found in $PATH." "$LINENO" 5
+ as_fn_error $? "llvm-config not found in $PATH." "$LINENO" 5
fi
llvm_components="jit mcjit engine nativecodegen native"
@@ -32496,30 +32493,29 @@
-fi
-
-# libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
-if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
+ fi
+
+ # libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
+ if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
LIBCXX="/usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libCrun.so.1"
-fi
-
-# TODO better (platform agnostic) test
-if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then
+ fi
+
+ # TODO better (platform agnostic) test
+ if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then
LIBCXX="-lstdc++"
-fi
-
+ fi
# After we have toolchain and the paths to all libraries (needed by msys), we can compile the fixpath helper
-# When using cygwin or msys, we need a wrapper binary that renames
-# /cygdrive/c/ arguments into c:/ arguments and peeks into
-# @files and rewrites these too! This wrapper binary is
-# called fixpath.
-FIXPATH=
-if test "x$OPENJDK_BUILD_OS" = xwindows; then
+ # When using cygwin or msys, we need a wrapper binary that renames
+ # /cygdrive/c/ arguments into c:/ arguments and peeks into
+ # @files and rewrites these too! This wrapper binary is
+ # called fixpath.
+ FIXPATH=
+ if test "x$OPENJDK_BUILD_OS" = xwindows; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if fixpath can be created" >&5
$as_echo_n "checking if fixpath can be created... " >&6; }
FIXPATH_SRC="$SRC_ROOT/common/src/fixpath.c"
@@ -32546,10 +32542,10 @@
cd $CURDIR
if test ! -x $OUTPUT_ROOT/fixpath.exe; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- cat $OUTPUT_ROOT/fixpath1.log
- as_fn_error $? "Could not create $OUTPUT_ROOT/fixpath.exe" "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ cat $OUTPUT_ROOT/fixpath1.log
+ as_fn_error $? "Could not create $OUTPUT_ROOT/fixpath.exe" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
@@ -32559,15 +32555,15 @@
$FIXPATH $CC $SRC_ROOT/common/src/fixpath.c -Fe$OUTPUT_ROOT/fixpath2.exe > $OUTPUT_ROOT/fixpath2.log 2>&1
cd $CURDIR
if test ! -x $OUTPUT_ROOT/fixpath2.exe; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- cat $OUTPUT_ROOT/fixpath2.log
- as_fn_error $? "fixpath did not work!" "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ cat $OUTPUT_ROOT/fixpath2.log
+ as_fn_error $? "fixpath did not work!" "$LINENO" 5
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
rm -f $OUTPUT_ROOT/fixpath?.??? $OUTPUT_ROOT/fixpath.obj
-fi
+ fi
@@ -32579,30 +32575,29 @@
###############################################################################
-HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
-
-
-# The name of the Service Agent jar.
-SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}"
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}"
-fi
-
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if elliptic curve crypto implementation is present" >&5
+ HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
+
+
+ # The name of the Service Agent jar.
+ SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}"
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}"
+ fi
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if elliptic curve crypto implementation is present" >&5
$as_echo_n "checking if elliptic curve crypto implementation is present... " >&6; }
-if test -d "${SRC_ROOT}/jdk/src/share/native/sun/security/ec/impl"; then
- ENABLE_INTREE_EC=yes
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ if test -d "${SRC_ROOT}/jdk/src/share/native/sun/security/ec/impl"; then
+ ENABLE_INTREE_EC=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
-else
- ENABLE_INTREE_EC=no
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
+ else
+ ENABLE_INTREE_EC=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
@@ -32625,39 +32620,38 @@
if test "x$with_num_cores" = x; then
# The number of cores were not specified, try to probe them.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for number of cores" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for number of cores" >&5
$as_echo_n "checking for number of cores... " >&6; }
- NUM_CORES=1
- FOUND_CORES=no
-
- if test -f /proc/cpuinfo; then
- # Looks like a Linux (or cygwin) system
- NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
- FOUND_CORES=yes
- elif test -x /usr/sbin/psrinfo; then
- # Looks like a Solaris system
- NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
- FOUND_CORES=yes
- elif test -x /usr/sbin/system_profiler; then
- # Looks like a MacOSX system
- NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print $5}'`
- FOUND_CORES=yes
- elif test -n "$NUMBER_OF_PROCESSORS"; then
- # On windows, look in the env
- NUM_CORES=$NUMBER_OF_PROCESSORS
- FOUND_CORES=yes
- fi
-
- if test "x$FOUND_CORES" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NUM_CORES" >&5
+ NUM_CORES=1
+ FOUND_CORES=no
+
+ if test -f /proc/cpuinfo; then
+ # Looks like a Linux (or cygwin) system
+ NUM_CORES=`cat /proc/cpuinfo | grep -c processor`
+ FOUND_CORES=yes
+ elif test -x /usr/sbin/psrinfo; then
+ # Looks like a Solaris system
+ NUM_CORES=`LC_MESSAGES=C /usr/sbin/psrinfo -v | grep -c on-line`
+ FOUND_CORES=yes
+ elif test -x /usr/sbin/system_profiler; then
+ # Looks like a MacOSX system
+ NUM_CORES=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Cores' | awk '{print $5}'`
+ FOUND_CORES=yes
+ elif test -n "$NUMBER_OF_PROCESSORS"; then
+ # On windows, look in the env
+ NUM_CORES=$NUMBER_OF_PROCESSORS
+ FOUND_CORES=yes
+ fi
+
+ if test "x$FOUND_CORES" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NUM_CORES" >&5
$as_echo "$NUM_CORES" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect number of cores, defaulting to 1" >&5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect number of cores, defaulting to 1" >&5
$as_echo "could not detect number of cores, defaulting to 1" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This will disable all parallelism from build!" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This will disable all parallelism from build!" >&5
$as_echo "$as_me: WARNING: This will disable all parallelism from build!" >&2;}
- fi
-
+ fi
else
NUM_CORES=$with_num_cores
@@ -32675,42 +32669,42 @@
if test "x$with_memory_size" = x; then
# The memory size was not specified, try to probe it.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for memory size" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for memory size" >&5
$as_echo_n "checking for memory size... " >&6; }
- # Default to 1024 MB
- MEMORY_SIZE=1024
- FOUND_MEM=no
-
- if test -f /proc/meminfo; then
- # Looks like a Linux (or cygwin) system
- MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print $2}'`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
- FOUND_MEM=yes
- elif test -x /usr/sbin/prtconf; then
- # Looks like a Solaris system
- MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print $3 }'`
- FOUND_MEM=yes
- elif test -x /usr/sbin/system_profiler; then
- # Looks like a MacOSX system
- MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print $2}'`
- MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
- FOUND_MEM=yes
- elif test "x$OPENJDK_BUILD_OS" = xwindows; then
- # Windows, but without cygwin
- MEMORY_SIZE=`wmic computersystem get totalphysicalmemory -value | grep = | cut -d "=" -f 2-`
- MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
- FOUND_MEM=yes
- fi
-
- if test "x$FOUND_MEM" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MEMORY_SIZE MB" >&5
+ # Default to 1024 MB
+ MEMORY_SIZE=1024
+ FOUND_MEM=no
+
+ if test -f /proc/meminfo; then
+ # Looks like a Linux (or cygwin) system
+ MEMORY_SIZE=`cat /proc/meminfo | grep MemTotal | awk '{print $2}'`
+ MEMORY_SIZE=`expr $MEMORY_SIZE / 1024`
+ FOUND_MEM=yes
+ elif test -x /usr/sbin/prtconf; then
+ # Looks like a Solaris system
+ MEMORY_SIZE=`/usr/sbin/prtconf | grep "Memory size" | awk '{ print $3 }'`
+ FOUND_MEM=yes
+ elif test -x /usr/sbin/system_profiler; then
+ # Looks like a MacOSX system
+ MEMORY_SIZE=`/usr/sbin/system_profiler -detailLevel full SPHardwareDataType | grep 'Memory' | awk '{print $2}'`
+ MEMORY_SIZE=`expr $MEMORY_SIZE \* 1024`
+ FOUND_MEM=yes
+ elif test "x$OPENJDK_BUILD_OS" = xwindows; then
+ # Windows, but without cygwin
+ MEMORY_SIZE=`wmic computersystem get totalphysicalmemory -value | grep = | cut -d "=" -f 2-`
+ MEMORY_SIZE=`expr $MEMORY_SIZE / 1024 / 1024`
+ FOUND_MEM=yes
+ fi
+
+ if test "x$FOUND_MEM" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MEMORY_SIZE MB" >&5
$as_echo "$MEMORY_SIZE MB" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size, defaulting to 1024 MB" >&5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: could not detect memory size, defaulting to 1024 MB" >&5
$as_echo "could not detect memory size, defaulting to 1024 MB" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This might seriously impact build performance!" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: This might seriously impact build performance!" >&5
$as_echo "$as_me: WARNING: This might seriously impact build performance!" >&2;}
- fi
+ fi
else
MEMORY_SIZE=$with_memory_size
@@ -32766,224 +32760,223 @@
fi
-if test "x$with_sjavac_server_java" != x; then
+ if test "x$with_sjavac_server_java" != x; then
SJAVAC_SERVER_JAVA="$with_sjavac_server_java"
FOUND_VERSION=`$SJAVAC_SERVER_JAVA -version 2>&1 | grep " version \""`
if test "x$FOUND_VERSION" = x; then
- as_fn_error $? "Could not execute server java: $SJAVAC_SERVER_JAVA" "$LINENO" 5
- fi
-else
+ as_fn_error $? "Could not execute server java: $SJAVAC_SERVER_JAVA" "$LINENO" 5
+ fi
+ else
SJAVAC_SERVER_JAVA=""
# Hotspot specific options.
- $ECHO "Check if jvm arg is ok: -verbosegc" >&5
- $ECHO "Command: $JAVA -verbosegc -version" >&5
- OUTPUT=`$JAVA -verbosegc -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -verbosegc"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -verbosegc" >&5
+ $ECHO "Command: $JAVA -verbosegc -version" >&5
+ OUTPUT=`$JAVA -verbosegc -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -verbosegc"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
# JRockit specific options.
- $ECHO "Check if jvm arg is ok: -Xverbose:gc" >&5
- $ECHO "Command: $JAVA -Xverbose:gc -version" >&5
- OUTPUT=`$JAVA -Xverbose:gc -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xverbose:gc"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -Xverbose:gc" >&5
+ $ECHO "Command: $JAVA -Xverbose:gc -version" >&5
+ OUTPUT=`$JAVA -Xverbose:gc -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xverbose:gc"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
SJAVAC_SERVER_JAVA="$JAVA $SJAVAC_SERVER_JAVA"
-fi
-
-
-if test "$MEMORY_SIZE" -gt "2500"; then
-
- $ECHO "Check if jvm arg is ok: -d64" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -d64 -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -d64"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ fi
+
+
+ if test "$MEMORY_SIZE" -gt "2500"; then
+
+ $ECHO "Check if jvm arg is ok: -d64" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -d64 -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -d64 -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -d64"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
if test "$JVM_ARG_OK" = true; then
- JVM_64BIT=true
- JVM_ARG_OK=false
- fi
- fi
-
-if test "$JVM_64BIT" = true; then
+ JVM_64BIT=true
+ JVM_ARG_OK=false
+ fi
+ fi
+
+ if test "$JVM_64BIT" = true; then
if test "$MEMORY_SIZE" -gt "17000"; then
- $ECHO "Check if jvm arg is ok: -Xms10G -Xmx10G" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -Xms10G -Xmx10G" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms10G -Xmx10G"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
fi
if test "$MEMORY_SIZE" -gt "10000" && test "$JVM_ARG_OK" = false; then
- $ECHO "Check if jvm arg is ok: -Xms6G -Xmx6G" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -Xms6G -Xmx6G" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms6G -Xmx6G"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
fi
if test "$MEMORY_SIZE" -gt "5000" && test "$JVM_ARG_OK" = false; then
- $ECHO "Check if jvm arg is ok: -Xms1G -Xmx3G" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
+ $ECHO "Check if jvm arg is ok: -Xms1G -Xmx3G" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx3G"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
fi
if test "$MEMORY_SIZE" -gt "3800" && test "$JVM_ARG_OK" = false; then
- $ECHO "Check if jvm arg is ok: -Xms1G -Xmx2500M" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
- fi
-fi
-if test "$MEMORY_SIZE" -gt "2500" && test "$JVM_ARG_OK" = false; then
-
- $ECHO "Check if jvm arg is ok: -Xms1000M -Xmx1500M" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-fi
-if test "$MEMORY_SIZE" -gt "1000" && test "$JVM_ARG_OK" = false; then
-
- $ECHO "Check if jvm arg is ok: -Xms400M -Xmx1100M" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-fi
-if test "$JVM_ARG_OK" = false; then
-
- $ECHO "Check if jvm arg is ok: -Xms256M -Xmx512M" >&5
- $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version" >&5
- OUTPUT=`$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version 2>&1`
- FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
- FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
- if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
- SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M"
- JVM_ARG_OK=true
- else
- $ECHO "Arg failed:" >&5
- $ECHO "$OUTPUT" >&5
- JVM_ARG_OK=false
- fi
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use sjavac" >&5
+ $ECHO "Check if jvm arg is ok: -Xms1G -Xmx2500M" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1G -Xmx2500M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ fi
+ fi
+ if test "$MEMORY_SIZE" -gt "2500" && test "$JVM_ARG_OK" = false; then
+
+ $ECHO "Check if jvm arg is ok: -Xms1000M -Xmx1500M" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms1000M -Xmx1500M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ fi
+ if test "$MEMORY_SIZE" -gt "1000" && test "$JVM_ARG_OK" = false; then
+
+ $ECHO "Check if jvm arg is ok: -Xms400M -Xmx1100M" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms400M -Xmx1100M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ fi
+ if test "$JVM_ARG_OK" = false; then
+
+ $ECHO "Check if jvm arg is ok: -Xms256M -Xmx512M" >&5
+ $ECHO "Command: $SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version" >&5
+ OUTPUT=`$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M -version 2>&1`
+ FOUND_WARN=`$ECHO "$OUTPUT" | grep -i warn`
+ FOUND_VERSION=`$ECHO $OUTPUT | grep " version \""`
+ if test "x$FOUND_VERSION" != x && test "x$FOUND_WARN" = x; then
+ SJAVAC_SERVER_JAVA="$SJAVAC_SERVER_JAVA -Xms256M -Xmx512M"
+ JVM_ARG_OK=true
+ else
+ $ECHO "Arg failed:" >&5
+ $ECHO "$OUTPUT" >&5
+ JVM_ARG_OK=false
+ fi
+
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use sjavac" >&5
$as_echo_n "checking whether to use sjavac... " >&6; }
-# Check whether --enable-sjavac was given.
+ # Check whether --enable-sjavac was given.
if test "${enable_sjavac+set}" = set; then :
enableval=$enable_sjavac; ENABLE_SJAVAC="${enableval}"
else
ENABLE_SJAVAC='no'
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_SJAVAC" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ENABLE_SJAVAC" >&5
$as_echo "$ENABLE_SJAVAC" >&6; }
-if test "x$ENABLE_SJAVAC" = xyes; then
+ if test "x$ENABLE_SJAVAC" = xyes; then
SJAVAC_SERVER_DIR="$OUTPUT_ROOT/javacservers"
-else
+ else
SJAVAC_SERVER_DIR=
-fi
-
+ fi
# Can the C/C++ compiler use precompiled headers?
-###############################################################################
-#
-# Can the C/C++ compiler use precompiled headers?
-#
-# Check whether --enable-precompiled-headers was given.
+ ###############################################################################
+ #
+ # Can the C/C++ compiler use precompiled headers?
+ #
+ # Check whether --enable-precompiled-headers was given.
if test "${enable_precompiled_headers+set}" = set; then :
enableval=$enable_precompiled_headers; ENABLE_PRECOMPH=${enable_precompiled_headers}
else
@@ -32991,48 +32984,48 @@
fi
-USE_PRECOMPILED_HEADER=1
-if test "x$ENABLE_PRECOMPH" = xno; then
+ USE_PRECOMPILED_HEADER=1
+ if test "x$ENABLE_PRECOMPH" = xno; then
USE_PRECOMPILED_HEADER=0
-fi
-
-if test "x$ENABLE_PRECOMPH" = xyes; then
+ fi
+
+ if test "x$ENABLE_PRECOMPH" = xyes; then
# Check that the compiler actually supports precomp headers.
if test "x$GCC" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking that precompiled headers work" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking that precompiled headers work" >&5
$as_echo_n "checking that precompiled headers work... " >&6; }
- echo "int alfa();" > conftest.h
- $CXX -x c++-header conftest.h -o conftest.hpp.gch 2>&5 >&5
- if test ! -f conftest.hpp.gch; then
- USE_PRECOMPILED_HEADER=0
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ echo "int alfa();" > conftest.h
+ $CXX -x c++-header conftest.h -o conftest.hpp.gch 2>&5 >&5
+ if test ! -f conftest.hpp.gch; then
+ USE_PRECOMPILED_HEADER=0
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- fi
- rm -f conftest.h conftest.hpp.gch
- fi
-fi
+ fi
+ rm -f conftest.h conftest.hpp.gch
+ fi
+ fi
# Setup use of ccache, if available
- # Check whether --enable-ccache was given.
+ # Check whether --enable-ccache was given.
if test "${enable_ccache+set}" = set; then :
enableval=$enable_ccache; ENABLE_CCACHE=${enable_ccache}
else
ENABLE_CCACHE=yes
fi
- if test "x$ENABLE_CCACHE" = xyes; then
- OLD_PATH="$PATH"
- if test "x$TOOLS_DIR" != x; then
- PATH=$TOOLS_DIR:$PATH
- fi
- # Extract the first word of "ccache", so it can be a program name with args.
+ if test "x$ENABLE_CCACHE" = xyes; then
+ OLD_PATH="$PATH"
+ if test "x$TOOLS_DIR" != x; then
+ PATH=$TOOLS_DIR:$PATH
+ fi
+ # Extract the first word of "ccache", so it can be a program name with args.
set dummy ccache; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -33072,14 +33065,14 @@
fi
- PATH="$OLD_PATH"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ccache" >&5
+ PATH="$OLD_PATH"
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ccache" >&5
$as_echo_n "checking for ccache... " >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: explicitly disabled" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: explicitly disabled" >&5
$as_echo "explicitly disabled" >&6; }
- CCACHE=
- fi
+ CCACHE=
+ fi
@@ -33089,33 +33082,33 @@
fi
- if test "x$with_ccache_dir" != x; then
- # When using a non home ccache directory, assume the use is to share ccache files
- # with other users. Thus change the umask.
- SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002"
- fi
- CCACHE_FOUND=""
- if test "x$CCACHE" != x; then
-
- if test "x$CCACHE" != x; then
- CCACHE_FOUND="true"
- # Only use ccache if it is 3.1.4 or later, which supports
- # precompiled headers.
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ccache supports precompiled headers" >&5
+ if test "x$with_ccache_dir" != x; then
+ # When using a non home ccache directory, assume the use is to share ccache files
+ # with other users. Thus change the umask.
+ SET_CCACHE_DIR="CCACHE_DIR=$with_ccache_dir CCACHE_UMASK=002"
+ fi
+ CCACHE_FOUND=""
+ if test "x$CCACHE" != x; then
+
+ if test "x$CCACHE" != x; then
+ CCACHE_FOUND="true"
+ # Only use ccache if it is 3.1.4 or later, which supports
+ # precompiled headers.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if ccache supports precompiled headers" >&5
$as_echo_n "checking if ccache supports precompiled headers... " >&6; }
- HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.[456789]) 2> /dev/null`
- if test "x$HAS_GOOD_CCACHE" = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccache" >&5
+ HAS_GOOD_CCACHE=`($CCACHE --version | head -n 1 | grep -E 3.1.[456789]) 2> /dev/null`
+ if test "x$HAS_GOOD_CCACHE" = x; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccache" >&5
$as_echo "no, disabling ccache" >&6; }
- CCACHE=
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ CCACHE=
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if C-compiler supports ccache precompiled headers" >&5
$as_echo_n "checking if C-compiler supports ccache precompiled headers... " >&6; }
- PUSHED_FLAGS="$CXXFLAGS"
- CXXFLAGS="-fpch-preprocess $CXXFLAGS"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ PUSHED_FLAGS="$CXXFLAGS"
+ CXXFLAGS="-fpch-preprocess $CXXFLAGS"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int
@@ -33132,30 +33125,30 @@
CC_KNOWS_CCACHE_TRICK=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- CXXFLAGS="$PUSHED_FLAGS"
- if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+ CXXFLAGS="$PUSHED_FLAGS"
+ if test "x$CC_KNOWS_CCACHE_TRICK" = xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccaching of precompiled headers" >&5
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, disabling ccaching of precompiled headers" >&5
$as_echo "no, disabling ccaching of precompiled headers" >&6; }
- CCACHE=
- fi
- fi
- fi
-
- if test "x$CCACHE" != x; then
- CCACHE_SLOPPINESS=time_macros
- CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
- CCACHE_FLAGS=-fpch-preprocess
-
- if test "x$SET_CCACHE_DIR" != x; then
- mkdir -p $CCACHE_DIR > /dev/null 2>&1
- chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1
- fi
- fi
-
- fi
+ CCACHE=
+ fi
+ fi
+ fi
+
+ if test "x$CCACHE" != x; then
+ CCACHE_SLOPPINESS=time_macros
+ CCACHE="CCACHE_COMPRESS=1 $SET_CCACHE_DIR CCACHE_SLOPPINESS=$CCACHE_SLOPPINESS $CCACHE"
+ CCACHE_FLAGS=-fpch-preprocess
+
+ if test "x$SET_CCACHE_DIR" != x; then
+ mkdir -p $CCACHE_DIR > /dev/null 2>&1
+ chmod a+rwxs $CCACHE_DIR > /dev/null 2>&1
+ fi
+ fi
+
+ fi
###############################################################################
@@ -33174,12 +33167,11 @@
fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if build directory is on local disk" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if build directory is on local disk" >&5
$as_echo_n "checking if build directory is on local disk... " >&6; }
- # df -l lists only local disks; if the given directory is not found then
- # a non-zero exit code is given
+ # df -l lists only local disks; if the given directory is not found then
+ # a non-zero exit code is given
if test "x$DF" = x; then
if test "x$OPENJDK_BUILD_OS_ENV" = "xwindows.msys"; then
# msys does not have df; use Windows "net use" instead.
@@ -33201,30 +33193,29 @@
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $OUTPUT_DIR_IS_LOCAL" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OUTPUT_DIR_IS_LOCAL" >&5
$as_echo "$OUTPUT_DIR_IS_LOCAL" >&6; }
-# Check if the user has any old-style ALT_ variables set.
-FOUND_ALT_VARIABLES=`env | grep ^ALT_`
-
-# Before generating output files, test if they exist. If they do, this is a reconfigure.
-# Since we can't properly handle the dependencies for this, warn the user about the situation
-if test -e $OUTPUT_ROOT/spec.gmk; then
- IS_RECONFIGURE=yes
-else
- IS_RECONFIGURE=no
-fi
-
-if test -e $SRC_ROOT/build/.hide-configure-performance-hints; then
- HIDE_PERFORMANCE_HINTS=yes
-else
- HIDE_PERFORMANCE_HINTS=no
- # Hide it the next time around...
- $TOUCH $SRC_ROOT/build/.hide-configure-performance-hints > /dev/null 2>&1
-fi
-
+ # Check if the user has any old-style ALT_ variables set.
+ FOUND_ALT_VARIABLES=`env | grep ^ALT_`
+
+ # Before generating output files, test if they exist. If they do, this is a reconfigure.
+ # Since we can't properly handle the dependencies for this, warn the user about the situation
+ if test -e $OUTPUT_ROOT/spec.gmk; then
+ IS_RECONFIGURE=yes
+ else
+ IS_RECONFIGURE=no
+ fi
+
+ if test -e $SRC_ROOT/build/.hide-configure-performance-hints; then
+ HIDE_PERFORMANCE_HINTS=yes
+ else
+ HIDE_PERFORMANCE_HINTS=no
+ # Hide it the next time around...
+ $TOUCH $SRC_ROOT/build/.hide-configure-performance-hints > /dev/null 2>&1
+ fi
# At the end, call the custom hook. (Dummy macro if no custom sources available)
@@ -34525,115 +34516,115 @@
# Finally output some useful information to the user
-# Finally output some useful information to the user
-
-if test "x$CCACHE_FOUND" != x; then
- if test "x$HAS_GOOD_CCACHE" = x; then
- CCACHE_STATUS="installed, but disabled (version older than 3.1.4)"
- CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading."
- else
- CCACHE_STATUS="installed and in use"
- fi
-else
- if test "x$GCC" = xyes; then
- CCACHE_STATUS="not installed (consider installing)"
- CCACHE_HELP_MSG="You do not have ccache installed. Try installing it."
- else
- CCACHE_STATUS="not available for your system"
- fi
-fi
-
-printf "\n"
-printf "====================================================\n"
-printf "A new configuration has been successfully created in\n"
-printf "$OUTPUT_ROOT\n"
-if test "x$CONFIGURE_COMMAND_LINE" != x; then
- printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n"
-else
- printf "using default settings.\n"
-fi
-
-printf "\n"
-printf "Configuration summary:\n"
-printf "* Debug level: $DEBUG_LEVEL\n"
-printf "* JDK variant: $JDK_VARIANT\n"
-printf "* JVM variants: $with_jvm_variants\n"
-printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n"
-
-printf "\n"
-printf "Tools summary:\n"
-if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- printf "* Environment: $WINDOWS_ENV_VENDOR version $WINDOWS_ENV_VERSION (root at $WINDOWS_ENV_ROOT_PATH)\n"
-fi
-printf "* Boot JDK: $BOOT_JDK_VERSION (at $BOOT_JDK)\n"
-printf "* C Compiler: $CC_VENDOR version $CC_VERSION (at $CC)\n"
-printf "* C++ Compiler: $CXX_VENDOR version $CXX_VERSION (at $CXX)\n"
-
-printf "\n"
-printf "Build performance summary:\n"
-printf "* Cores to use: $JOBS\n"
-printf "* Memory limit: $MEMORY_SIZE MB\n"
-printf "* ccache status: $CCACHE_STATUS\n"
-printf "\n"
-
-if test "x$CCACHE_HELP_MSG" != x && test "x$HIDE_PERFORMANCE_HINTS" = "xno"; then
- printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n"
- printf "$CCACHE_HELP_MSG\n"
-
- # Print a helpful message on how to acquire the necessary build dependency.
- # ccache is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=ccache
- PKGHANDLER_COMMAND=
-
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ # Finally output some useful information to the user
+
+ if test "x$CCACHE_FOUND" != x; then
+ if test "x$HAS_GOOD_CCACHE" = x; then
+ CCACHE_STATUS="installed, but disabled (version older than 3.1.4)"
+ CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading."
+ else
+ CCACHE_STATUS="installed and in use"
+ fi
+ else
+ if test "x$GCC" = xyes; then
+ CCACHE_STATUS="not installed (consider installing)"
+ CCACHE_HELP_MSG="You do not have ccache installed. Try installing it."
+ else
+ CCACHE_STATUS="not available for your system"
+ fi
+ fi
+
+ printf "\n"
+ printf "====================================================\n"
+ printf "A new configuration has been successfully created in\n"
+ printf "$OUTPUT_ROOT\n"
+ if test "x$CONFIGURE_COMMAND_LINE" != x; then
+ printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n"
+ else
+ printf "using default settings.\n"
+ fi
+
+ printf "\n"
+ printf "Configuration summary:\n"
+ printf "* Debug level: $DEBUG_LEVEL\n"
+ printf "* JDK variant: $JDK_VARIANT\n"
+ printf "* JVM variants: $with_jvm_variants\n"
+ printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n"
+
+ printf "\n"
+ printf "Tools summary:\n"
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ printf "* Environment: $WINDOWS_ENV_VENDOR version $WINDOWS_ENV_VERSION (root at $WINDOWS_ENV_ROOT_PATH)\n"
+ fi
+ printf "* Boot JDK: $BOOT_JDK_VERSION (at $BOOT_JDK)\n"
+ printf "* C Compiler: $CC_VENDOR version $CC_VERSION (at $CC)\n"
+ printf "* C++ Compiler: $CXX_VENDOR version $CXX_VERSION (at $CXX)\n"
+
+ printf "\n"
+ printf "Build performance summary:\n"
+ printf "* Cores to use: $JOBS\n"
+ printf "* Memory limit: $MEMORY_SIZE MB\n"
+ printf "* ccache status: $CCACHE_STATUS\n"
+ printf "\n"
+
+ if test "x$CCACHE_HELP_MSG" != x && test "x$HIDE_PERFORMANCE_HINTS" = "xno"; then
+ printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n"
+ printf "$CCACHE_HELP_MSG\n"
+
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # ccache is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=ccache
+ PKGHANDLER_COMMAND=
+
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
-
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
-
- printf "$HELP_MSG\n"
- printf "\n"
-fi
-
-if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xyes"; then
- printf "NOTE: You have requested to build more than one version of the JVM, which\n"
- printf "will result in longer build times.\n"
- printf "\n"
-fi
-
-if test "x$FOUND_ALT_VARIABLES" != "x"; then
- printf "WARNING: You have old-style ALT_ environment variables set.\n"
- printf "These are not respected, and will be ignored. It is recommended\n"
- printf "that you clean your environment. The following variables are set:\n"
- printf "$FOUND_ALT_VARIABLES\n"
- printf "\n"
-fi
-
-if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then
- printf "WARNING: Your build output directory is not on a local disk.\n"
- printf "This will severely degrade build performance!\n"
- printf "It is recommended that you create an output directory on a local disk,\n"
- printf "and run the configure script again from that directory.\n"
- printf "\n"
-fi
-
-if test "x$IS_RECONFIGURE" = "xyes"; then
- printf "WARNING: The result of this configuration has overridden an older\n"
- printf "configuration. You *should* run 'make clean' to make sure you get a\n"
- printf "proper build. Failure to do so might result in strange build problems.\n"
- printf "\n"
-fi
-
+ esac
+
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
+
+ printf "$HELP_MSG\n"
+ printf "\n"
+ fi
+
+ if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xyes"; then
+ printf "NOTE: You have requested to build more than one version of the JVM, which\n"
+ printf "will result in longer build times.\n"
+ printf "\n"
+ fi
+
+ if test "x$FOUND_ALT_VARIABLES" != "x"; then
+ printf "WARNING: You have old-style ALT_ environment variables set.\n"
+ printf "These are not respected, and will be ignored. It is recommended\n"
+ printf "that you clean your environment. The following variables are set:\n"
+ printf "$FOUND_ALT_VARIABLES\n"
+ printf "\n"
+ fi
+
+ if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then
+ printf "WARNING: Your build output directory is not on a local disk.\n"
+ printf "This will severely degrade build performance!\n"
+ printf "It is recommended that you create an output directory on a local disk,\n"
+ printf "and run the configure script again from that directory.\n"
+ printf "\n"
+ fi
+
+ if test "x$IS_RECONFIGURE" = "xyes"; then
+ printf "WARNING: The result of this configuration has overridden an older\n"
+ printf "configuration. You *should* run 'make clean' to make sure you get a\n"
+ printf "proper build. Failure to do so might result in strange build problems.\n"
+ printf "\n"
+ fi
+
--- a/common/autoconf/help.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/help.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,194 +25,194 @@
AC_DEFUN_ONCE([HELP_SETUP_DEPENDENCY_HELP],
[
- AC_CHECK_PROGS(PKGHANDLER, apt-get yum port pkgutil pkgadd)
+ AC_CHECK_PROGS(PKGHANDLER, apt-get yum port pkgutil pkgadd)
])
AC_DEFUN([HELP_MSG_MISSING_DEPENDENCY],
[
- # Print a helpful message on how to acquire the necessary build dependency.
- # $1 is the help tag: freetyp2, cups, pulse, alsa etc
- MISSING_DEPENDENCY=$1
- PKGHANDLER_COMMAND=
+ # Print a helpful message on how to acquire the necessary build dependency.
+ # $1 is the help tag: freetyp2, cups, pulse, alsa etc
+ MISSING_DEPENDENCY=$1
+ PKGHANDLER_COMMAND=
- case $PKGHANDLER in
- apt-get)
- apt_help $MISSING_DEPENDENCY ;;
+ case $PKGHANDLER in
+ apt-get)
+ apt_help $MISSING_DEPENDENCY ;;
yum)
- yum_help $MISSING_DEPENDENCY ;;
- port)
- port_help $MISSING_DEPENDENCY ;;
- pkgutil)
- pkgutil_help $MISSING_DEPENDENCY ;;
- pkgadd)
- pkgadd_help $MISSING_DEPENDENCY ;;
+ yum_help $MISSING_DEPENDENCY ;;
+ port)
+ port_help $MISSING_DEPENDENCY ;;
+ pkgutil)
+ pkgutil_help $MISSING_DEPENDENCY ;;
+ pkgadd)
+ pkgadd_help $MISSING_DEPENDENCY ;;
* )
break ;;
- esac
+ esac
- if test "x$PKGHANDLER_COMMAND" != x; then
- HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
- fi
+ if test "x$PKGHANDLER_COMMAND" != x; then
+ HELP_MSG="You might be able to fix this by running '$PKGHANDLER_COMMAND'."
+ fi
])
cygwin_help() {
- case $1 in
+ case $1 in
unzip)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P unzip" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P unzip" ;;
zip)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P zip" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P zip" ;;
make)
- PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P make" ;;
+ PKGHANDLER_COMMAND="cd <location of cygwin setup.exe> && cmd /c setup -q -P make" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
apt_help() {
- case $1 in
+ case $1 in
devkit)
- PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install build-essential" ;;
openjdk)
- PKGHANDLER_COMMAND="sudo apt-get install openjdk-7-jdk" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install openjdk-7-jdk" ;;
alsa)
- PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libasound2-dev" ;;
cups)
- PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libcups2-dev" ;;
freetype2)
- PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libfreetype6-dev" ;;
pulse)
- PKGHANDLER_COMMAND="sudo apt-get install libpulse-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libpulse-dev" ;;
x11)
- PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install libX11-dev libxext-dev libxrender-dev libxtst-dev libxt-dev" ;;
ccache)
- PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
+ PKGHANDLER_COMMAND="sudo apt-get install ccache" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
yum_help() {
- case $1 in
+ case $1 in
devkit)
- PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;;
+ PKGHANDLER_COMMAND="sudo yum groupinstall \"Development Tools\"" ;;
openjdk)
- PKGHANDLER_COMMAND="sudo yum install java-1.7.0-openjdk" ;;
+ PKGHANDLER_COMMAND="sudo yum install java-1.7.0-openjdk" ;;
alsa)
- PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install alsa-lib-devel" ;;
cups)
- PKGHANDLER_COMMAND="sudo yum install cups-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install cups-devel" ;;
freetype2)
- PKGHANDLER_COMMAND="sudo yum install freetype-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install freetype-devel" ;;
pulse)
- PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
x11)
- PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
+ PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
ccache)
- PKGHANDLER_COMMAND="sudo yum install ccache" ;;
+ PKGHANDLER_COMMAND="sudo yum install ccache" ;;
* )
- break ;;
- esac
+ break ;;
+ esac
}
port_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
pkgutil_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
pkgadd_help() {
- PKGHANDLER_COMMAND=""
+ PKGHANDLER_COMMAND=""
}
AC_DEFUN_ONCE([HELP_PRINT_SUMMARY_AND_WARNINGS],
[
-# Finally output some useful information to the user
+ # Finally output some useful information to the user
-if test "x$CCACHE_FOUND" != x; then
- if test "x$HAS_GOOD_CCACHE" = x; then
- CCACHE_STATUS="installed, but disabled (version older than 3.1.4)"
- CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading."
- else
- CCACHE_STATUS="installed and in use"
- fi
-else
- if test "x$GCC" = xyes; then
- CCACHE_STATUS="not installed (consider installing)"
- CCACHE_HELP_MSG="You do not have ccache installed. Try installing it."
- else
- CCACHE_STATUS="not available for your system"
- fi
-fi
+ if test "x$CCACHE_FOUND" != x; then
+ if test "x$HAS_GOOD_CCACHE" = x; then
+ CCACHE_STATUS="installed, but disabled (version older than 3.1.4)"
+ CCACHE_HELP_MSG="You have ccache installed, but it is a version prior to 3.1.4. Try upgrading."
+ else
+ CCACHE_STATUS="installed and in use"
+ fi
+ else
+ if test "x$GCC" = xyes; then
+ CCACHE_STATUS="not installed (consider installing)"
+ CCACHE_HELP_MSG="You do not have ccache installed. Try installing it."
+ else
+ CCACHE_STATUS="not available for your system"
+ fi
+ fi
-printf "\n"
-printf "====================================================\n"
-printf "A new configuration has been successfully created in\n"
-printf "$OUTPUT_ROOT\n"
-if test "x$CONFIGURE_COMMAND_LINE" != x; then
- printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n"
-else
- printf "using default settings.\n"
-fi
+ printf "\n"
+ printf "====================================================\n"
+ printf "A new configuration has been successfully created in\n"
+ printf "$OUTPUT_ROOT\n"
+ if test "x$CONFIGURE_COMMAND_LINE" != x; then
+ printf "using configure arguments '$CONFIGURE_COMMAND_LINE'.\n"
+ else
+ printf "using default settings.\n"
+ fi
-printf "\n"
-printf "Configuration summary:\n"
-printf "* Debug level: $DEBUG_LEVEL\n"
-printf "* JDK variant: $JDK_VARIANT\n"
-printf "* JVM variants: $with_jvm_variants\n"
-printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n"
+ printf "\n"
+ printf "Configuration summary:\n"
+ printf "* Debug level: $DEBUG_LEVEL\n"
+ printf "* JDK variant: $JDK_VARIANT\n"
+ printf "* JVM variants: $with_jvm_variants\n"
+ printf "* OpenJDK target: OS: $OPENJDK_TARGET_OS, CPU architecture: $OPENJDK_TARGET_CPU_ARCH, address length: $OPENJDK_TARGET_CPU_BITS\n"
-printf "\n"
-printf "Tools summary:\n"
-if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
- printf "* Environment: $WINDOWS_ENV_VENDOR version $WINDOWS_ENV_VERSION (root at $WINDOWS_ENV_ROOT_PATH)\n"
-fi
-printf "* Boot JDK: $BOOT_JDK_VERSION (at $BOOT_JDK)\n"
-printf "* C Compiler: $CC_VENDOR version $CC_VERSION (at $CC)\n"
-printf "* C++ Compiler: $CXX_VENDOR version $CXX_VERSION (at $CXX)\n"
+ printf "\n"
+ printf "Tools summary:\n"
+ if test "x$OPENJDK_BUILD_OS" = "xwindows"; then
+ printf "* Environment: $WINDOWS_ENV_VENDOR version $WINDOWS_ENV_VERSION (root at $WINDOWS_ENV_ROOT_PATH)\n"
+ fi
+ printf "* Boot JDK: $BOOT_JDK_VERSION (at $BOOT_JDK)\n"
+ printf "* C Compiler: $CC_VENDOR version $CC_VERSION (at $CC)\n"
+ printf "* C++ Compiler: $CXX_VENDOR version $CXX_VERSION (at $CXX)\n"
-printf "\n"
-printf "Build performance summary:\n"
-printf "* Cores to use: $JOBS\n"
-printf "* Memory limit: $MEMORY_SIZE MB\n"
-printf "* ccache status: $CCACHE_STATUS\n"
-printf "\n"
+ printf "\n"
+ printf "Build performance summary:\n"
+ printf "* Cores to use: $JOBS\n"
+ printf "* Memory limit: $MEMORY_SIZE MB\n"
+ printf "* ccache status: $CCACHE_STATUS\n"
+ printf "\n"
-if test "x$CCACHE_HELP_MSG" != x && test "x$HIDE_PERFORMANCE_HINTS" = "xno"; then
- printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n"
- printf "$CCACHE_HELP_MSG\n"
- HELP_MSG_MISSING_DEPENDENCY([ccache])
- printf "$HELP_MSG\n"
- printf "\n"
-fi
+ if test "x$CCACHE_HELP_MSG" != x && test "x$HIDE_PERFORMANCE_HINTS" = "xno"; then
+ printf "Build performance tip: ccache gives a tremendous speedup for C++ recompilations.\n"
+ printf "$CCACHE_HELP_MSG\n"
+ HELP_MSG_MISSING_DEPENDENCY([ccache])
+ printf "$HELP_MSG\n"
+ printf "\n"
+ fi
-if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xyes"; then
- printf "NOTE: You have requested to build more than one version of the JVM, which\n"
- printf "will result in longer build times.\n"
- printf "\n"
-fi
+ if test "x$BUILDING_MULTIPLE_JVM_VARIANTS" = "xyes"; then
+ printf "NOTE: You have requested to build more than one version of the JVM, which\n"
+ printf "will result in longer build times.\n"
+ printf "\n"
+ fi
-if test "x$FOUND_ALT_VARIABLES" != "x"; then
- printf "WARNING: You have old-style ALT_ environment variables set.\n"
- printf "These are not respected, and will be ignored. It is recommended\n"
- printf "that you clean your environment. The following variables are set:\n"
- printf "$FOUND_ALT_VARIABLES\n"
- printf "\n"
-fi
+ if test "x$FOUND_ALT_VARIABLES" != "x"; then
+ printf "WARNING: You have old-style ALT_ environment variables set.\n"
+ printf "These are not respected, and will be ignored. It is recommended\n"
+ printf "that you clean your environment. The following variables are set:\n"
+ printf "$FOUND_ALT_VARIABLES\n"
+ printf "\n"
+ fi
-if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then
- printf "WARNING: Your build output directory is not on a local disk.\n"
- printf "This will severely degrade build performance!\n"
- printf "It is recommended that you create an output directory on a local disk,\n"
- printf "and run the configure script again from that directory.\n"
- printf "\n"
-fi
+ if test "x$OUTPUT_DIR_IS_LOCAL" != "xyes"; then
+ printf "WARNING: Your build output directory is not on a local disk.\n"
+ printf "This will severely degrade build performance!\n"
+ printf "It is recommended that you create an output directory on a local disk,\n"
+ printf "and run the configure script again from that directory.\n"
+ printf "\n"
+ fi
-if test "x$IS_RECONFIGURE" = "xyes"; then
- printf "WARNING: The result of this configuration has overridden an older\n"
- printf "configuration. You *should* run 'make clean' to make sure you get a\n"
- printf "proper build. Failure to do so might result in strange build problems.\n"
- printf "\n"
-fi
+ if test "x$IS_RECONFIGURE" = "xyes"; then
+ printf "WARNING: The result of this configuration has overridden an older\n"
+ printf "configuration. You *should* run 'make clean' to make sure you get a\n"
+ printf "proper build. Failure to do so might result in strange build problems.\n"
+ printf "\n"
+ fi
])
--- a/common/autoconf/hotspot-spec.gmk.in Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/hotspot-spec.gmk.in Thu Oct 10 14:58:19 2013 +0200
@@ -111,12 +111,12 @@
USE_PRECOMPILED_HEADER=@USE_PRECOMPILED_HEADER@
# Hotspot expects the variable FULL_DEBUG_SYMBOLS=1/0 to control debug symbols
-# creation.
-ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
+# creation.
+ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
FULL_DEBUG_SYMBOLS=1
- # Ensure hotspot uses the objcopy that configure located
- ALT_OBJCOPY:=$(OBJCOPY)
-else
+ # Ensure hotspot uses the objcopy that configure located
+ ALT_OBJCOPY:=$(OBJCOPY)
+else
FULL_DEBUG_SYMBOLS=0
endif
--- a/common/autoconf/jdk-options.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/jdk-options.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,235 +25,234 @@
AC_DEFUN_ONCE([JDKOPT_SETUP_JDK_VARIANT],
[
-###############################################################################
-#
-# Check which variant of the JDK that we want to build.
-# Currently we have:
-# normal: standard edition
-# but the custom make system may add other variants
-#
-# Effectively the JDK variant gives a name to a specific set of
-# modules to compile into the JDK. In the future, these modules
-# might even be Jigsaw modules.
-#
-AC_MSG_CHECKING([which variant of the JDK to build])
-AC_ARG_WITH([jdk-variant], [AS_HELP_STRING([--with-jdk-variant],
- [JDK variant to build (normal) @<:@normal@:>@])])
+ ###############################################################################
+ #
+ # Check which variant of the JDK that we want to build.
+ # Currently we have:
+ # normal: standard edition
+ # but the custom make system may add other variants
+ #
+ # Effectively the JDK variant gives a name to a specific set of
+ # modules to compile into the JDK. In the future, these modules
+ # might even be Jigsaw modules.
+ #
+ AC_MSG_CHECKING([which variant of the JDK to build])
+ AC_ARG_WITH([jdk-variant], [AS_HELP_STRING([--with-jdk-variant],
+ [JDK variant to build (normal) @<:@normal@:>@])])
-if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
+ if test "x$with_jdk_variant" = xnormal || test "x$with_jdk_variant" = x; then
JDK_VARIANT="normal"
-else
+ else
AC_MSG_ERROR([The available JDK variants are: normal])
-fi
+ fi
-AC_SUBST(JDK_VARIANT)
+ AC_SUBST(JDK_VARIANT)
-AC_MSG_RESULT([$JDK_VARIANT])
+ AC_MSG_RESULT([$JDK_VARIANT])
])
AC_DEFUN_ONCE([JDKOPT_SETUP_JVM_VARIANTS],
[
-###############################################################################
-#
-# Check which variants of the JVM that we want to build.
-# Currently we have:
-# server: normal interpreter and a tiered C1/C2 compiler
-# client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms)
-# minimal1: reduced form of client with optional VM services and features stripped out
-# kernel: kernel footprint JVM that passes the TCK without major performance problems,
-# ie normal interpreter and C1, only the serial GC, kernel jvmti etc
-# zero: no machine code interpreter, no compiler
-# zeroshark: zero interpreter and shark/llvm compiler backend
-AC_MSG_CHECKING([which variants of the JVM to build])
-AC_ARG_WITH([jvm-variants], [AS_HELP_STRING([--with-jvm-variants],
- [JVM variants (separated by commas) to build (server, client, minimal1, kernel, zero, zeroshark) @<:@server@:>@])])
+ ###############################################################################
+ #
+ # Check which variants of the JVM that we want to build.
+ # Currently we have:
+ # server: normal interpreter and a tiered C1/C2 compiler
+ # client: normal interpreter and C1 (no C2 compiler) (only 32-bit platforms)
+ # minimal1: reduced form of client with optional VM services and features stripped out
+ # kernel: kernel footprint JVM that passes the TCK without major performance problems,
+ # ie normal interpreter and C1, only the serial GC, kernel jvmti etc
+ # zero: no machine code interpreter, no compiler
+ # zeroshark: zero interpreter and shark/llvm compiler backend
+ AC_MSG_CHECKING([which variants of the JVM to build])
+ AC_ARG_WITH([jvm-variants], [AS_HELP_STRING([--with-jvm-variants],
+ [JVM variants (separated by commas) to build (server, client, minimal1, kernel, zero, zeroshark) @<:@server@:>@])])
-if test "x$with_jvm_variants" = x; then
- with_jvm_variants="server"
-fi
+ if test "x$with_jvm_variants" = x; then
+ with_jvm_variants="server"
+ fi
-JVM_VARIANTS=",$with_jvm_variants,"
-TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/minimal1,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'`
+ JVM_VARIANTS=",$with_jvm_variants,"
+ TEST_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,//' -e 's/client,//' -e 's/minimal1,//' -e 's/kernel,//' -e 's/zero,//' -e 's/zeroshark,//'`
-if test "x$TEST_VARIANTS" != "x,"; then
- AC_MSG_ERROR([The available JVM variants are: server, client, minimal1, kernel, zero, zeroshark])
-fi
-AC_MSG_RESULT([$with_jvm_variants])
+ if test "x$TEST_VARIANTS" != "x,"; then
+ AC_MSG_ERROR([The available JVM variants are: server, client, minimal1, kernel, zero, zeroshark])
+ fi
+ AC_MSG_RESULT([$with_jvm_variants])
-JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'`
-JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'`
-JVM_VARIANT_MINIMAL1=`$ECHO "$JVM_VARIANTS" | $SED -e '/,minimal1,/!s/.*/false/g' -e '/,minimal1,/s/.*/true/g'`
-JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'`
-JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'`
-JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'`
+ JVM_VARIANT_SERVER=`$ECHO "$JVM_VARIANTS" | $SED -e '/,server,/!s/.*/false/g' -e '/,server,/s/.*/true/g'`
+ JVM_VARIANT_CLIENT=`$ECHO "$JVM_VARIANTS" | $SED -e '/,client,/!s/.*/false/g' -e '/,client,/s/.*/true/g'`
+ JVM_VARIANT_MINIMAL1=`$ECHO "$JVM_VARIANTS" | $SED -e '/,minimal1,/!s/.*/false/g' -e '/,minimal1,/s/.*/true/g'`
+ JVM_VARIANT_KERNEL=`$ECHO "$JVM_VARIANTS" | $SED -e '/,kernel,/!s/.*/false/g' -e '/,kernel,/s/.*/true/g'`
+ JVM_VARIANT_ZERO=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zero,/!s/.*/false/g' -e '/,zero,/s/.*/true/g'`
+ JVM_VARIANT_ZEROSHARK=`$ECHO "$JVM_VARIANTS" | $SED -e '/,zeroshark,/!s/.*/false/g' -e '/,zeroshark,/s/.*/true/g'`
-if test "x$JVM_VARIANT_CLIENT" = xtrue; then
+ if test "x$JVM_VARIANT_CLIENT" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- AC_MSG_ERROR([You cannot build a client JVM for a 64-bit machine.])
+ AC_MSG_ERROR([You cannot build a client JVM for a 64-bit machine.])
fi
-fi
-if test "x$JVM_VARIANT_KERNEL" = xtrue; then
+ fi
+ if test "x$JVM_VARIANT_KERNEL" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- AC_MSG_ERROR([You cannot build a kernel JVM for a 64-bit machine.])
+ AC_MSG_ERROR([You cannot build a kernel JVM for a 64-bit machine.])
fi
-fi
-if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
+ fi
+ if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- AC_MSG_ERROR([You cannot build a minimal JVM for a 64-bit machine.])
+ AC_MSG_ERROR([You cannot build a minimal JVM for a 64-bit machine.])
fi
-fi
+ fi
-# Replace the commas with AND for use in the build directory name.
-ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'`
-COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/minimal1,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'`
-if test "x$COUNT_VARIANTS" != "x,1"; then
+ # Replace the commas with AND for use in the build directory name.
+ ANDED_JVM_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/^,//' -e 's/,$//' -e 's/,/AND/'`
+ COUNT_VARIANTS=`$ECHO "$JVM_VARIANTS" | $SED -e 's/server,/1/' -e 's/client,/1/' -e 's/minimal1,/1/' -e 's/kernel,/1/' -e 's/zero,/1/' -e 's/zeroshark,/1/'`
+ if test "x$COUNT_VARIANTS" != "x,1"; then
BUILDING_MULTIPLE_JVM_VARIANTS=yes
-else
+ else
BUILDING_MULTIPLE_JVM_VARIANTS=no
-fi
+ fi
-AC_SUBST(JVM_VARIANTS)
-AC_SUBST(JVM_VARIANT_SERVER)
-AC_SUBST(JVM_VARIANT_CLIENT)
-AC_SUBST(JVM_VARIANT_MINIMAL1)
-AC_SUBST(JVM_VARIANT_KERNEL)
-AC_SUBST(JVM_VARIANT_ZERO)
-AC_SUBST(JVM_VARIANT_ZEROSHARK)
+ AC_SUBST(JVM_VARIANTS)
+ AC_SUBST(JVM_VARIANT_SERVER)
+ AC_SUBST(JVM_VARIANT_CLIENT)
+ AC_SUBST(JVM_VARIANT_MINIMAL1)
+ AC_SUBST(JVM_VARIANT_KERNEL)
+ AC_SUBST(JVM_VARIANT_ZERO)
+ AC_SUBST(JVM_VARIANT_ZEROSHARK)
-INCLUDE_SA=true
-if test "x$JVM_VARIANT_ZERO" = xtrue ; then
+ INCLUDE_SA=true
+ if test "x$JVM_VARIANT_ZERO" = xtrue ; then
INCLUDE_SA=false
-fi
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue ; then
+ fi
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue ; then
INCLUDE_SA=false
-fi
-AC_SUBST(INCLUDE_SA)
+ fi
+ AC_SUBST(INCLUDE_SA)
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- MACOSX_UNIVERSAL="true"
-fi
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ MACOSX_UNIVERSAL="true"
+ fi
-AC_SUBST(MACOSX_UNIVERSAL)
-
+ AC_SUBST(MACOSX_UNIVERSAL)
])
AC_DEFUN_ONCE([JDKOPT_SETUP_DEBUG_LEVEL],
[
-###############################################################################
-#
-# Set the debug level
-# release: no debug information, all optimizations, no asserts.
-# fastdebug: debug information (-g), all optimizations, all asserts
-# slowdebug: debug information (-g), no optimizations, all asserts
-#
-DEBUG_LEVEL="release"
-AC_MSG_CHECKING([which debug level to use])
-AC_ARG_ENABLE([debug], [AS_HELP_STRING([--enable-debug],
- [set the debug level to fastdebug (shorthand for --with-debug-level=fastdebug) @<:@disabled@:>@])],
- [
+ ###############################################################################
+ #
+ # Set the debug level
+ # release: no debug information, all optimizations, no asserts.
+ # fastdebug: debug information (-g), all optimizations, all asserts
+ # slowdebug: debug information (-g), no optimizations, all asserts
+ #
+ DEBUG_LEVEL="release"
+ AC_MSG_CHECKING([which debug level to use])
+ AC_ARG_ENABLE([debug], [AS_HELP_STRING([--enable-debug],
+ [set the debug level to fastdebug (shorthand for --with-debug-level=fastdebug) @<:@disabled@:>@])],
+ [
ENABLE_DEBUG="${enableval}"
DEBUG_LEVEL="fastdebug"
- ], [ENABLE_DEBUG="no"])
+ ], [ENABLE_DEBUG="no"])
-AC_ARG_WITH([debug-level], [AS_HELP_STRING([--with-debug-level],
- [set the debug level (release, fastdebug, slowdebug) @<:@release@:>@])],
- [
+ AC_ARG_WITH([debug-level], [AS_HELP_STRING([--with-debug-level],
+ [set the debug level (release, fastdebug, slowdebug) @<:@release@:>@])],
+ [
DEBUG_LEVEL="${withval}"
if test "x$ENABLE_DEBUG" = xyes; then
- AC_MSG_ERROR([You cannot use both --enable-debug and --with-debug-level at the same time.])
+ AC_MSG_ERROR([You cannot use both --enable-debug and --with-debug-level at the same time.])
fi
- ])
-AC_MSG_RESULT([$DEBUG_LEVEL])
+ ])
+ AC_MSG_RESULT([$DEBUG_LEVEL])
-if test "x$DEBUG_LEVEL" != xrelease && \
- test "x$DEBUG_LEVEL" != xfastdebug && \
- test "x$DEBUG_LEVEL" != xslowdebug; then
- AC_MSG_ERROR([Allowed debug levels are: release, fastdebug and slowdebug])
-fi
+ if test "x$DEBUG_LEVEL" != xrelease && \
+ test "x$DEBUG_LEVEL" != xfastdebug && \
+ test "x$DEBUG_LEVEL" != xslowdebug; then
+ AC_MSG_ERROR([Allowed debug levels are: release, fastdebug and slowdebug])
+ fi
-###############################################################################
-#
-# Setup legacy vars/targets and new vars to deal with different debug levels.
-#
+ ###############################################################################
+ #
+ # Setup legacy vars/targets and new vars to deal with different debug levels.
+ #
-case $DEBUG_LEVEL in
- release )
- VARIANT="OPT"
- FASTDEBUG="false"
- DEBUG_CLASSFILES="false"
- BUILD_VARIANT_RELEASE=""
- HOTSPOT_DEBUG_LEVEL="product"
- HOTSPOT_EXPORT="product"
- ;;
- fastdebug )
- VARIANT="DBG"
- FASTDEBUG="true"
- DEBUG_CLASSFILES="true"
- BUILD_VARIANT_RELEASE="-fastdebug"
- HOTSPOT_DEBUG_LEVEL="fastdebug"
- HOTSPOT_EXPORT="fastdebug"
- ;;
- slowdebug )
- VARIANT="DBG"
- FASTDEBUG="false"
- DEBUG_CLASSFILES="true"
- BUILD_VARIANT_RELEASE="-debug"
- HOTSPOT_DEBUG_LEVEL="jvmg"
- HOTSPOT_EXPORT="debug"
- ;;
-esac
+ case $DEBUG_LEVEL in
+ release )
+ VARIANT="OPT"
+ FASTDEBUG="false"
+ DEBUG_CLASSFILES="false"
+ BUILD_VARIANT_RELEASE=""
+ HOTSPOT_DEBUG_LEVEL="product"
+ HOTSPOT_EXPORT="product"
+ ;;
+ fastdebug )
+ VARIANT="DBG"
+ FASTDEBUG="true"
+ DEBUG_CLASSFILES="true"
+ BUILD_VARIANT_RELEASE="-fastdebug"
+ HOTSPOT_DEBUG_LEVEL="fastdebug"
+ HOTSPOT_EXPORT="fastdebug"
+ ;;
+ slowdebug )
+ VARIANT="DBG"
+ FASTDEBUG="false"
+ DEBUG_CLASSFILES="true"
+ BUILD_VARIANT_RELEASE="-debug"
+ HOTSPOT_DEBUG_LEVEL="jvmg"
+ HOTSPOT_EXPORT="debug"
+ ;;
+ esac
-#####
-# Generate the legacy makefile targets for hotspot.
-# The hotspot api for selecting the build artifacts, really, needs to be improved.
-# JDK-7195896 will fix this on the hotspot side by using the JVM_VARIANT_* variables to
-# determine what needs to be built. All we will need to set here is all_product, all_fastdebug etc
-# But until then ...
-HOTSPOT_TARGET=""
+ #####
+ # Generate the legacy makefile targets for hotspot.
+ # The hotspot api for selecting the build artifacts, really, needs to be improved.
+ # JDK-7195896 will fix this on the hotspot side by using the JVM_VARIANT_* variables to
+ # determine what needs to be built. All we will need to set here is all_product, all_fastdebug etc
+ # But until then ...
+ HOTSPOT_TARGET=""
-if test "x$JVM_VARIANT_SERVER" = xtrue; then
+ if test "x$JVM_VARIANT_SERVER" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL} "
-fi
+ fi
-if test "x$JVM_VARIANT_CLIENT" = xtrue; then
+ if test "x$JVM_VARIANT_CLIENT" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}1 "
-fi
+ fi
-if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
+ if test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}minimal1 "
-fi
+ fi
-if test "x$JVM_VARIANT_KERNEL" = xtrue; then
+ if test "x$JVM_VARIANT_KERNEL" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}kernel "
-fi
+ fi
-if test "x$JVM_VARIANT_ZERO" = xtrue; then
+ if test "x$JVM_VARIANT_ZERO" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}zero "
-fi
+ fi
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
HOTSPOT_TARGET="$HOTSPOT_TARGET${HOTSPOT_DEBUG_LEVEL}shark "
-fi
+ fi
-HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
+ HOTSPOT_TARGET="$HOTSPOT_TARGET docs export_$HOTSPOT_EXPORT"
-# On Macosx universal binaries are produced, but they only contain
-# 64 bit intel. This invalidates control of which jvms are built
-# from configure, but only server is valid anyway. Fix this
-# when hotspot makefiles are rewritten.
-if test "x$MACOSX_UNIVERSAL" = xtrue; then
+ # On Macosx universal binaries are produced, but they only contain
+ # 64 bit intel. This invalidates control of which jvms are built
+ # from configure, but only server is valid anyway. Fix this
+ # when hotspot makefiles are rewritten.
+ if test "x$MACOSX_UNIVERSAL" = xtrue; then
HOTSPOT_TARGET=universal_${HOTSPOT_EXPORT}
-fi
+ fi
-#####
+ #####
-AC_SUBST(DEBUG_LEVEL)
-AC_SUBST(VARIANT)
-AC_SUBST(FASTDEBUG)
-AC_SUBST(DEBUG_CLASSFILES)
-AC_SUBST(BUILD_VARIANT_RELEASE)
+ AC_SUBST(DEBUG_LEVEL)
+ AC_SUBST(VARIANT)
+ AC_SUBST(FASTDEBUG)
+ AC_SUBST(DEBUG_CLASSFILES)
+ AC_SUBST(BUILD_VARIANT_RELEASE)
])
@@ -264,7 +263,7 @@
AC_DEFUN_ONCE([JDKOPT_SETUP_OPEN_OR_CUSTOM],
[
AC_ARG_ENABLE([openjdk-only], [AS_HELP_STRING([--enable-openjdk-only],
- [suppress building custom source even if present @<:@disabled@:>@])],,[enable_openjdk_only="no"])
+ [suppress building custom source even if present @<:@disabled@:>@])],,[enable_openjdk_only="no"])
AC_MSG_CHECKING([for presence of closed sources])
if test -d "$SRC_ROOT/jdk/src/closed"; then
@@ -301,100 +300,100 @@
AC_DEFUN_ONCE([JDKOPT_SETUP_JDK_OPTIONS],
[
-###############################################################################
-#
-# Should we build a JDK/JVM with headful support (ie a graphical ui)?
-# We always build headless support.
-#
-AC_MSG_CHECKING([headful support])
-AC_ARG_ENABLE([headful], [AS_HELP_STRING([--disable-headful],
- [disable building headful support (graphical UI support) @<:@enabled@:>@])],
- [SUPPORT_HEADFUL=${enable_headful}], [SUPPORT_HEADFUL=yes])
+ ###############################################################################
+ #
+ # Should we build a JDK/JVM with headful support (ie a graphical ui)?
+ # We always build headless support.
+ #
+ AC_MSG_CHECKING([headful support])
+ AC_ARG_ENABLE([headful], [AS_HELP_STRING([--disable-headful],
+ [disable building headful support (graphical UI support) @<:@enabled@:>@])],
+ [SUPPORT_HEADFUL=${enable_headful}], [SUPPORT_HEADFUL=yes])
-SUPPORT_HEADLESS=yes
-BUILD_HEADLESS="BUILD_HEADLESS:=true"
+ SUPPORT_HEADLESS=yes
+ BUILD_HEADLESS="BUILD_HEADLESS:=true"
-if test "x$SUPPORT_HEADFUL" = xyes; then
+ if test "x$SUPPORT_HEADFUL" = xyes; then
# We are building both headful and headless.
headful_msg="include support for both headful and headless"
-fi
+ fi
-if test "x$SUPPORT_HEADFUL" = xno; then
+ if test "x$SUPPORT_HEADFUL" = xno; then
# Thus we are building headless only.
BUILD_HEADLESS="BUILD_HEADLESS:=true"
headful_msg="headless only"
-fi
+ fi
-AC_MSG_RESULT([$headful_msg])
+ AC_MSG_RESULT([$headful_msg])
-AC_SUBST(SUPPORT_HEADLESS)
-AC_SUBST(SUPPORT_HEADFUL)
-AC_SUBST(BUILD_HEADLESS)
+ AC_SUBST(SUPPORT_HEADLESS)
+ AC_SUBST(SUPPORT_HEADFUL)
+ AC_SUBST(BUILD_HEADLESS)
-# Control wether Hotspot runs Queens test after build.
-AC_ARG_ENABLE([hotspot-test-in-build], [AS_HELP_STRING([--enable-hotspot-test-in-build],
- [run the Queens test after Hotspot build @<:@disabled@:>@])],,
- [enable_hotspot_test_in_build=no])
-if test "x$enable_hotspot_test_in_build" = "xyes"; then
+ # Control wether Hotspot runs Queens test after build.
+ AC_ARG_ENABLE([hotspot-test-in-build], [AS_HELP_STRING([--enable-hotspot-test-in-build],
+ [run the Queens test after Hotspot build @<:@disabled@:>@])],,
+ [enable_hotspot_test_in_build=no])
+ if test "x$enable_hotspot_test_in_build" = "xyes"; then
TEST_IN_BUILD=true
-else
+ else
TEST_IN_BUILD=false
-fi
-AC_SUBST(TEST_IN_BUILD)
+ fi
+ AC_SUBST(TEST_IN_BUILD)
-###############################################################################
-#
-# Choose cacerts source file
-#
-AC_ARG_WITH(cacerts-file, [AS_HELP_STRING([--with-cacerts-file],
- [specify alternative cacerts file])])
-if test "x$with_cacerts_file" != x; then
+ ###############################################################################
+ #
+ # Choose cacerts source file
+ #
+ AC_ARG_WITH(cacerts-file, [AS_HELP_STRING([--with-cacerts-file],
+ [specify alternative cacerts file])])
+ if test "x$with_cacerts_file" != x; then
CACERTS_FILE=$with_cacerts_file
-else
+ else
CACERTS_FILE=${SRC_ROOT}/jdk/src/share/lib/security/cacerts
-fi
-AC_SUBST(CACERTS_FILE)
+ fi
+ AC_SUBST(CACERTS_FILE)
-###############################################################################
-#
-# Enable or disable unlimited crypto
-#
-AC_ARG_ENABLE(unlimited-crypto, [AS_HELP_STRING([--enable-unlimited-crypto],
- [Enable unlimited crypto policy @<:@disabled@:>@])],,
- [enable_unlimited_crypto=no])
-if test "x$enable_unlimited_crypto" = "xyes"; then
+ ###############################################################################
+ #
+ # Enable or disable unlimited crypto
+ #
+ AC_ARG_ENABLE(unlimited-crypto, [AS_HELP_STRING([--enable-unlimited-crypto],
+ [Enable unlimited crypto policy @<:@disabled@:>@])],,
+ [enable_unlimited_crypto=no])
+ if test "x$enable_unlimited_crypto" = "xyes"; then
UNLIMITED_CRYPTO=true
-else
+ else
UNLIMITED_CRYPTO=false
-fi
-AC_SUBST(UNLIMITED_CRYPTO)
+ fi
+ AC_SUBST(UNLIMITED_CRYPTO)
-###############################################################################
-#
-# Enable or disable the elliptic curve crypto implementation
-#
-AC_DEFUN_ONCE([JDKOPT_DETECT_INTREE_EC],
-[
-AC_MSG_CHECKING([if elliptic curve crypto implementation is present])
+ ###############################################################################
+ #
+ # Enable or disable the elliptic curve crypto implementation
+ #
+ AC_DEFUN_ONCE([JDKOPT_DETECT_INTREE_EC],
+ [
+ AC_MSG_CHECKING([if elliptic curve crypto implementation is present])
-if test -d "${SRC_ROOT}/jdk/src/share/native/sun/security/ec/impl"; then
- ENABLE_INTREE_EC=yes
- AC_MSG_RESULT([yes])
-else
- ENABLE_INTREE_EC=no
- AC_MSG_RESULT([no])
-fi
+ if test -d "${SRC_ROOT}/jdk/src/share/native/sun/security/ec/impl"; then
+ ENABLE_INTREE_EC=yes
+ AC_MSG_RESULT([yes])
+ else
+ ENABLE_INTREE_EC=no
+ AC_MSG_RESULT([no])
+ fi
-AC_SUBST(ENABLE_INTREE_EC)
-])
+ AC_SUBST(ENABLE_INTREE_EC)
+ ])
-###############################################################################
-#
-# Compress jars
-#
-COMPRESS_JARS=false
+ ###############################################################################
+ #
+ # Compress jars
+ #
+ COMPRESS_JARS=false
-AC_SUBST(COMPRESS_JARS)
+ AC_SUBST(COMPRESS_JARS)
])
###############################################################################
@@ -403,153 +402,152 @@
#
AC_DEFUN_ONCE([JDKOPT_SETUP_JDK_VERSION_NUMBERS],
[
-# Source the version numbers
-. $AUTOCONF_DIR/version-numbers
+ # Source the version numbers
+ . $AUTOCONF_DIR/version-numbers
-# Get the settings from parameters
-AC_ARG_WITH(milestone, [AS_HELP_STRING([--with-milestone],
- [Set milestone value for build @<:@internal@:>@])])
-if test "x$with_milestone" = xyes; then
- AC_MSG_ERROR([Milestone must have a value])
-elif test "x$with_milestone" != x; then
+ # Get the settings from parameters
+ AC_ARG_WITH(milestone, [AS_HELP_STRING([--with-milestone],
+ [Set milestone value for build @<:@internal@:>@])])
+ if test "x$with_milestone" = xyes; then
+ AC_MSG_ERROR([Milestone must have a value])
+ elif test "x$with_milestone" != x; then
MILESTONE="$with_milestone"
-fi
-if test "x$MILESTONE" = x; then
- MILESTONE=internal
-fi
+ fi
+ if test "x$MILESTONE" = x; then
+ MILESTONE=internal
+ fi
-AC_ARG_WITH(update-version, [AS_HELP_STRING([--with-update-version],
- [Set update version value for build @<:@b00@:>@])])
-if test "x$with_update_version" = xyes; then
- AC_MSG_ERROR([Update version must have a value])
-elif test "x$with_update_version" != x; then
- JDK_UPDATE_VERSION="$with_update_version"
-fi
+ AC_ARG_WITH(update-version, [AS_HELP_STRING([--with-update-version],
+ [Set update version value for build @<:@b00@:>@])])
+ if test "x$with_update_version" = xyes; then
+ AC_MSG_ERROR([Update version must have a value])
+ elif test "x$with_update_version" != x; then
+ JDK_UPDATE_VERSION="$with_update_version"
+ fi
-AC_ARG_WITH(user-release-suffix, [AS_HELP_STRING([--with-user-release-suffix],
- [Add a custom string to the version string if build number isn't set.@<:@username_builddateb00@:>@])])
-if test "x$with_user_release_suffix" = xyes; then
- AC_MSG_ERROR([Release suffix must have a value])
-elif test "x$with_user_release_suffix" != x; then
- USER_RELEASE_SUFFIX="$with_user_release_suffix"
-fi
+ AC_ARG_WITH(user-release-suffix, [AS_HELP_STRING([--with-user-release-suffix],
+ [Add a custom string to the version string if build number isn't set.@<:@username_builddateb00@:>@])])
+ if test "x$with_user_release_suffix" = xyes; then
+ AC_MSG_ERROR([Release suffix must have a value])
+ elif test "x$with_user_release_suffix" != x; then
+ USER_RELEASE_SUFFIX="$with_user_release_suffix"
+ fi
-AC_ARG_WITH(build-number, [AS_HELP_STRING([--with-build-number],
- [Set build number value for build @<:@b00@:>@])])
-if test "x$with_build_number" = xyes; then
- AC_MSG_ERROR([Build number must have a value])
-elif test "x$with_build_number" != x; then
- JDK_BUILD_NUMBER="$with_build_number"
-fi
-# Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
-if test "x$JDK_BUILD_NUMBER" = x; then
- JDK_BUILD_NUMBER=b00
- if test "x$USER_RELEASE_SUFFIX" = x; then
- BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
- # Avoid [:alnum:] since it depends on the locale.
- CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
- USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ AC_ARG_WITH(build-number, [AS_HELP_STRING([--with-build-number],
+ [Set build number value for build @<:@b00@:>@])])
+ if test "x$with_build_number" = xyes; then
+ AC_MSG_ERROR([Build number must have a value])
+ elif test "x$with_build_number" != x; then
+ JDK_BUILD_NUMBER="$with_build_number"
fi
-fi
+ # Define default USER_RELEASE_SUFFIX if BUILD_NUMBER and USER_RELEASE_SUFFIX are not set
+ if test "x$JDK_BUILD_NUMBER" = x; then
+ JDK_BUILD_NUMBER=b00
+ if test "x$USER_RELEASE_SUFFIX" = x; then
+ BUILD_DATE=`date '+%Y_%m_%d_%H_%M'`
+ # Avoid [:alnum:] since it depends on the locale.
+ CLEAN_USERNAME=`echo "$USER" | $TR -d -c 'abcdefghijklmnopqrstuvqxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'`
+ USER_RELEASE_SUFFIX=`echo "${CLEAN_USERNAME}_${BUILD_DATE}" | $TR 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ fi
+ fi
-# Now set the JDK version, milestone, build number etc.
-AC_SUBST(USER_RELEASE_SUFFIX)
-AC_SUBST(JDK_MAJOR_VERSION)
-AC_SUBST(JDK_MINOR_VERSION)
-AC_SUBST(JDK_MICRO_VERSION)
-AC_SUBST(JDK_UPDATE_VERSION)
-AC_SUBST(JDK_BUILD_NUMBER)
-AC_SUBST(MILESTONE)
-AC_SUBST(LAUNCHER_NAME)
-AC_SUBST(PRODUCT_NAME)
-AC_SUBST(PRODUCT_SUFFIX)
-AC_SUBST(JDK_RC_PLATFORM_NAME)
-AC_SUBST(COMPANY_NAME)
-AC_SUBST(MACOSX_BUNDLE_NAME_BASE)
-AC_SUBST(MACOSX_BUNDLE_ID_BASE)
+ # Now set the JDK version, milestone, build number etc.
+ AC_SUBST(USER_RELEASE_SUFFIX)
+ AC_SUBST(JDK_MAJOR_VERSION)
+ AC_SUBST(JDK_MINOR_VERSION)
+ AC_SUBST(JDK_MICRO_VERSION)
+ AC_SUBST(JDK_UPDATE_VERSION)
+ AC_SUBST(JDK_BUILD_NUMBER)
+ AC_SUBST(MILESTONE)
+ AC_SUBST(LAUNCHER_NAME)
+ AC_SUBST(PRODUCT_NAME)
+ AC_SUBST(PRODUCT_SUFFIX)
+ AC_SUBST(JDK_RC_PLATFORM_NAME)
+ AC_SUBST(COMPANY_NAME)
+ AC_SUBST(MACOSX_BUNDLE_NAME_BASE)
+ AC_SUBST(MACOSX_BUNDLE_ID_BASE)
-COPYRIGHT_YEAR=`date +'%Y'`
-AC_SUBST(COPYRIGHT_YEAR)
+ COPYRIGHT_YEAR=`date +'%Y'`
+ AC_SUBST(COPYRIGHT_YEAR)
-if test "x$JDK_UPDATE_VERSION" != x; then
- JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}"
-else
- JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}"
-fi
-AC_SUBST(JDK_VERSION)
+ if test "x$JDK_UPDATE_VERSION" != x; then
+ JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}_${JDK_UPDATE_VERSION}"
+ else
+ JDK_VERSION="${JDK_MAJOR_VERSION}.${JDK_MINOR_VERSION}.${JDK_MICRO_VERSION}"
+ fi
+ AC_SUBST(JDK_VERSION)
-COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'`
-AC_SUBST(COOKED_BUILD_NUMBER)
+ COOKED_BUILD_NUMBER=`$ECHO $JDK_BUILD_NUMBER | $SED -e 's/^b//' -e 's/^0//'`
+ AC_SUBST(COOKED_BUILD_NUMBER)
])
AC_DEFUN_ONCE([JDKOPT_SETUP_BUILD_TWEAKS],
[
-HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
-AC_SUBST(HOTSPOT_MAKE_ARGS)
+ HOTSPOT_MAKE_ARGS="$HOTSPOT_TARGET"
+ AC_SUBST(HOTSPOT_MAKE_ARGS)
-# The name of the Service Agent jar.
-SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}"
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}"
-fi
-AC_SUBST(SALIB_NAME)
-
+ # The name of the Service Agent jar.
+ SALIB_NAME="${LIBRARY_PREFIX}saproc${SHARED_LIBRARY_SUFFIX}"
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ SALIB_NAME="${LIBRARY_PREFIX}sawindbg${SHARED_LIBRARY_SUFFIX}"
+ fi
+ AC_SUBST(SALIB_NAME)
])
AC_DEFUN_ONCE([JDKOPT_SETUP_DEBUG_SYMBOLS],
[
-#
-# ENABLE_DEBUG_SYMBOLS
-# This must be done after the toolchain is setup, since we're looking at objcopy.
-#
-AC_ARG_ENABLE([debug-symbols],
- [AS_HELP_STRING([--disable-debug-symbols],[disable generation of debug symbols @<:@enabled@:>@])])
-
-AC_MSG_CHECKING([if we should generate debug symbols])
+ #
+ # ENABLE_DEBUG_SYMBOLS
+ # This must be done after the toolchain is setup, since we're looking at objcopy.
+ #
+ AC_ARG_ENABLE([debug-symbols],
+ [AS_HELP_STRING([--disable-debug-symbols],[disable generation of debug symbols @<:@enabled@:>@])])
-if test "x$enable_debug_symbols" = "xyes" && test "x$OBJCOPY" = x; then
- # explicit enabling of enable-debug-symbols and can't find objcopy
- # this is an error
- AC_MSG_ERROR([Unable to find objcopy, cannot enable debug-symbols])
-fi
+ AC_MSG_CHECKING([if we should generate debug symbols])
-if test "x$enable_debug_symbols" = "xyes"; then
- ENABLE_DEBUG_SYMBOLS=true
-elif test "x$enable_debug_symbols" = "xno"; then
- ENABLE_DEBUG_SYMBOLS=false
-else
- # default on macosx is false
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- ENABLE_DEBUG_SYMBOLS=false
- # Default is on if objcopy is found, otherwise off
- elif test "x$OBJCOPY" != x || test "x$OPENJDK_TARGET_OS" = xwindows; then
+ if test "x$enable_debug_symbols" = "xyes" && test "x$OBJCOPY" = x; then
+ # explicit enabling of enable-debug-symbols and can't find objcopy
+ # this is an error
+ AC_MSG_ERROR([Unable to find objcopy, cannot enable debug-symbols])
+ fi
+
+ if test "x$enable_debug_symbols" = "xyes"; then
ENABLE_DEBUG_SYMBOLS=true
+ elif test "x$enable_debug_symbols" = "xno"; then
+ ENABLE_DEBUG_SYMBOLS=false
else
- ENABLE_DEBUG_SYMBOLS=false
+ # default on macosx is false
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ ENABLE_DEBUG_SYMBOLS=false
+ # Default is on if objcopy is found, otherwise off
+ elif test "x$OBJCOPY" != x || test "x$OPENJDK_TARGET_OS" = xwindows; then
+ ENABLE_DEBUG_SYMBOLS=true
+ else
+ ENABLE_DEBUG_SYMBOLS=false
+ fi
fi
-fi
-AC_MSG_RESULT([$ENABLE_DEBUG_SYMBOLS])
+ AC_MSG_RESULT([$ENABLE_DEBUG_SYMBOLS])
-#
-# ZIP_DEBUGINFO_FILES
-#
-AC_MSG_CHECKING([if we should zip debug-info files])
-AC_ARG_ENABLE([zip-debug-info],
- [AS_HELP_STRING([--disable-zip-debug-info],[disable zipping of debug-info files @<:@enabled@:>@])],
- [enable_zip_debug_info="${enableval}"], [enable_zip_debug_info="yes"])
-AC_MSG_RESULT([${enable_zip_debug_info}])
+ #
+ # ZIP_DEBUGINFO_FILES
+ #
+ AC_MSG_CHECKING([if we should zip debug-info files])
+ AC_ARG_ENABLE([zip-debug-info],
+ [AS_HELP_STRING([--disable-zip-debug-info],[disable zipping of debug-info files @<:@enabled@:>@])],
+ [enable_zip_debug_info="${enableval}"], [enable_zip_debug_info="yes"])
+ AC_MSG_RESULT([${enable_zip_debug_info}])
-if test "x${enable_zip_debug_info}" = "xno"; then
- ZIP_DEBUGINFO_FILES=false
-else
- ZIP_DEBUGINFO_FILES=true
-fi
+ if test "x${enable_zip_debug_info}" = "xno"; then
+ ZIP_DEBUGINFO_FILES=false
+ else
+ ZIP_DEBUGINFO_FILES=true
+ fi
-AC_SUBST(ENABLE_DEBUG_SYMBOLS)
-AC_SUBST(ZIP_DEBUGINFO_FILES)
-AC_SUBST(CFLAGS_DEBUG_SYMBOLS)
-AC_SUBST(CXXFLAGS_DEBUG_SYMBOLS)
+ AC_SUBST(ENABLE_DEBUG_SYMBOLS)
+ AC_SUBST(ZIP_DEBUGINFO_FILES)
+ AC_SUBST(CFLAGS_DEBUG_SYMBOLS)
+ AC_SUBST(CXXFLAGS_DEBUG_SYMBOLS)
])
# Support for customization of the build process. Some build files
@@ -557,5 +555,5 @@
# for a degree of customization of the build targets and the rules/recipes
# to create them
AC_ARG_WITH([custom-make-dir], [AS_HELP_STRING([--with-custom-make-dir],
- [use this directory for custom build/make files])], [CUSTOM_MAKE_DIR=$with_custom_make_dir])
+[use this directory for custom build/make files])], [CUSTOM_MAKE_DIR=$with_custom_make_dir])
AC_SUBST(CUSTOM_MAKE_DIR)
--- a/common/autoconf/libraries.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/libraries.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,638 +25,645 @@
AC_DEFUN_ONCE([LIB_SETUP_INIT],
[
-
-###############################################################################
-#
-# OS specific settings that we never will need to probe.
-#
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+
+ ###############################################################################
+ #
+ # OS specific settings that we never will need to probe.
+ #
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
AC_MSG_CHECKING([what is not needed on Linux?])
PULSE_NOT_NEEDED=yes
AC_MSG_RESULT([pulse])
-fi
+ fi
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
AC_MSG_CHECKING([what is not needed on Solaris?])
ALSA_NOT_NEEDED=yes
PULSE_NOT_NEEDED=yes
AC_MSG_RESULT([alsa pulse])
-fi
+ fi
-if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
AC_MSG_CHECKING([what is not needed on Windows?])
- CUPS_NOT_NEEDED=yes
+ CUPS_NOT_NEEDED=yes
ALSA_NOT_NEEDED=yes
PULSE_NOT_NEEDED=yes
X11_NOT_NEEDED=yes
AC_MSG_RESULT([alsa cups pulse x11])
-fi
+ fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
AC_MSG_CHECKING([what is not needed on MacOSX?])
ALSA_NOT_NEEDED=yes
PULSE_NOT_NEEDED=yes
X11_NOT_NEEDED=yes
- FREETYPE2_NOT_NEEDED=yes
+ FREETYPE2_NOT_NEEDED=yes
# If the java runtime framework is disabled, then we need X11.
# This will be adjusted below.
AC_MSG_RESULT([alsa pulse x11])
-fi
+ fi
-if test "x$OPENJDK_TARGET_OS" = xbsd; then
+ if test "x$OPENJDK_TARGET_OS" = xbsd; then
AC_MSG_CHECKING([what is not needed on bsd?])
ALSA_NOT_NEEDED=yes
- AC_MSG_RESULT([alsa])
-fi
+ AC_MSG_RESULT([alsa])
+ fi
-if test "x$OPENJDK" = "xfalse"; then
+ if test "x$OPENJDK" = "xfalse"; then
FREETYPE2_NOT_NEEDED=yes
-fi
+ fi
-if test "x$SUPPORT_HEADFUL" = xno; then
+ if test "x$SUPPORT_HEADFUL" = xno; then
X11_NOT_NEEDED=yes
-fi
+ fi
-###############################################################################
-#
-# Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
-# that uses this API.
-#
-AC_ARG_ENABLE([macosx-runtime-support], [AS_HELP_STRING([--disable-macosx-runtime-support],
- [disable the use of MacOSX Java runtime support framework @<:@enabled@:>@])],
- [MACOSX_RUNTIME_SUPPORT="${enableval}"],[MACOSX_RUNTIME_SUPPORT="no"])
+ ###############################################################################
+ #
+ # Check for MacOSX support for OpenJDK. If this exists, try to build a JVM
+ # that uses this API.
+ #
+ AC_ARG_ENABLE([macosx-runtime-support], [AS_HELP_STRING([--disable-macosx-runtime-support],
+ [disable the use of MacOSX Java runtime support framework @<:@enabled@:>@])],
+ [MACOSX_RUNTIME_SUPPORT="${enableval}"],[MACOSX_RUNTIME_SUPPORT="no"])
-USE_MACOSX_RUNTIME_SUPPORT=no
-AC_MSG_CHECKING([for explicit Java runtime support in the OS])
-if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then
+ USE_MACOSX_RUNTIME_SUPPORT=no
+ AC_MSG_CHECKING([for explicit Java runtime support in the OS])
+ if test -f /System/Library/Frameworks/JavaVM.framework/Frameworks/JavaRuntimeSupport.framework/Headers/JavaRuntimeSupport.h; then
if test "x$MACOSX_RUNTIME_SUPPORT" != xno; then
- MACOSX_RUNTIME_SUPPORT=yes
- USE_MACOSX_RUNTIME_SUPPORT=yes
- AC_MSG_RESULT([yes, does not need alsa freetype2 pulse and X11])
+ MACOSX_RUNTIME_SUPPORT=yes
+ USE_MACOSX_RUNTIME_SUPPORT=yes
+ AC_MSG_RESULT([yes, does not need alsa freetype2 pulse and X11])
else
- AC_MSG_RESULT([yes, but explicitly disabled.])
+ AC_MSG_RESULT([yes, but explicitly disabled.])
fi
-else
+ else
AC_MSG_RESULT([no])
-fi
+ fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then
+ if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$USE_MACOSX_RUNTIME_SUPPORT" = xno; then
AC_MSG_CHECKING([what is not needed on an X11 build on MacOSX?])
X11_NOT_NEEDED=
FREETYPE2_NOT_NEEDED=
AC_MSG_RESULT([alsa pulse])
-fi
+ fi
])
AC_DEFUN_ONCE([LIB_SETUP_X11],
[
-###############################################################################
-#
-# Check for X Windows
-#
+ ###############################################################################
+ #
+ # Check for X Windows
+ #
-# Check if the user has specified sysroot, but not --x-includes or --x-libraries.
-# Make a simple check for the libraries at the sysroot, and setup --x-includes and
-# --x-libraries for the sysroot, if that seems to be correct.
-if test "x$SYS_ROOT" != "x/"; then
- if test "x$x_includes" = xNONE; then
- if test -f "$SYS_ROOT/usr/X11R6/include/X11/Xlib.h"; then
- x_includes="$SYS_ROOT/usr/X11R6/include"
- elif test -f "$SYS_ROOT/usr/include/X11/Xlib.h"; then
- x_includes="$SYS_ROOT/usr/include"
+ # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
+ # Make a simple check for the libraries at the sysroot, and setup --x-includes and
+ # --x-libraries for the sysroot, if that seems to be correct.
+ if test "x$SYS_ROOT" != "x/"; then
+ if test "x$x_includes" = xNONE; then
+ if test -f "$SYS_ROOT/usr/X11R6/include/X11/Xlib.h"; then
+ x_includes="$SYS_ROOT/usr/X11R6/include"
+ elif test -f "$SYS_ROOT/usr/include/X11/Xlib.h"; then
+ x_includes="$SYS_ROOT/usr/include"
+ fi
+ fi
+ if test "x$x_libraries" = xNONE; then
+ if test -f "$SYS_ROOT/usr/X11R6/lib/libX11.so"; then
+ x_libraries="$SYS_ROOT/usr/X11R6/lib"
+ elif test "$SYS_ROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ x_libraries="$SYS_ROOT/usr/lib64"
+ elif test -f "$SYS_ROOT/usr/lib/libX11.so"; then
+ x_libraries="$SYS_ROOT/usr/lib"
+ fi
fi
fi
- if test "x$x_libraries" = xNONE; then
- if test -f "$SYS_ROOT/usr/X11R6/lib/libX11.so"; then
- x_libraries="$SYS_ROOT/usr/X11R6/lib"
- elif test "$SYS_ROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- x_libraries="$SYS_ROOT/usr/lib64"
- elif test -f "$SYS_ROOT/usr/lib/libX11.so"; then
- x_libraries="$SYS_ROOT/usr/lib"
- fi
- fi
-fi
+
+ # Now let autoconf do it's magic
+ AC_PATH_X
+ AC_PATH_XTRA
-# Now let autoconf do it's magic
-AC_PATH_X
-AC_PATH_XTRA
+ # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
+ # this doesn't make sense so we remove it.
+ if test "x$COMPILE_TYPE" = xcross; then
+ X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[[^ ]]*//g'`
+ fi
-# AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
-# this doesn't make sense so we remove it.
-if test "x$COMPILE_TYPE" = xcross; then
- X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[[^ ]]*//g'`
-fi
-
-if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
+ if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
HELP_MSG_MISSING_DEPENDENCY([x11])
AC_MSG_ERROR([Could not find X11 libraries. $HELP_MSG])
-fi
+ fi
-# Some of the old makefiles require a setting of OPENWIN_HOME
-# Since the X11R6 directory has disappeared on later Linuxes,
-# we need to probe for it.
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ # Some of the old makefiles require a setting of OPENWIN_HOME
+ # Since the X11R6 directory has disappeared on later Linuxes,
+ # we need to probe for it.
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
if test -d "$SYS_ROOT/usr/X11R6"; then
- OPENWIN_HOME="$SYS_ROOT/usr/X11R6"
+ OPENWIN_HOME="$SYS_ROOT/usr/X11R6"
elif test -d "$SYS_ROOT/usr/include/X11"; then
- OPENWIN_HOME="$SYS_ROOT/usr"
+ OPENWIN_HOME="$SYS_ROOT/usr"
fi
-fi
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
OPENWIN_HOME="/usr/openwin"
-fi
-AC_SUBST(OPENWIN_HOME)
+ fi
+ AC_SUBST(OPENWIN_HOME)
-#
-# Weird Sol10 something check...TODO change to try compile
-#
-if test "x${OPENJDK_TARGET_OS}" = xsolaris; then
- if test "`uname -r`" = "5.10"; then
- if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then
- X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS"
- fi
+ #
+ # Weird Sol10 something check...TODO change to try compile
+ #
+ if test "x${OPENJDK_TARGET_OS}" = xsolaris; then
+ if test "`uname -r`" = "5.10"; then
+ if test "`${EGREP} -c XLinearGradient ${OPENWIN_HOME}/share/include/X11/extensions/Xrender.h`" = "0"; then
+ X_CFLAGS="${X_CFLAGS} -DSOLARIS10_NO_XRENDER_STRUCTS"
+ fi
+ fi
fi
-fi
+
+ AC_LANG_PUSH(C)
+ OLD_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $X_CFLAGS"
-AC_LANG_PUSH(C)
-OLD_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS $X_CFLAGS"
+ # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
+ AC_CHECK_HEADERS([X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h],
+ [X11_A_OK=yes],
+ [X11_A_OK=no; break],
+ [
+ # include <X11/Xlib.h>
+ # include <X11/Xutil.h>
+ ]
+ )
-# Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
-AC_CHECK_HEADERS([X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h],
- [X11_A_OK=yes],
- [X11_A_OK=no; break],
- [ # include <X11/Xlib.h>
- # include <X11/Xutil.h>
- ])
+ CFLAGS="$OLD_CFLAGS"
+ AC_LANG_POP(C)
-CFLAGS="$OLD_CFLAGS"
-AC_LANG_POP(C)
-
-if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
+ if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
HELP_MSG_MISSING_DEPENDENCY([x11])
AC_MSG_ERROR([Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG])
-fi
+ fi
-AC_SUBST(X_CFLAGS)
-AC_SUBST(X_LIBS)
+ AC_SUBST(X_CFLAGS)
+ AC_SUBST(X_LIBS)
])
AC_DEFUN_ONCE([LIB_SETUP_CUPS],
[
-###############################################################################
-#
-# The common unix printing system cups is used to print from java.
-#
-AC_ARG_WITH(cups, [AS_HELP_STRING([--with-cups],
- [specify prefix directory for the cups package
- (expecting the headers under PATH/include)])])
-AC_ARG_WITH(cups-include, [AS_HELP_STRING([--with-cups-include],
- [specify directory for the cups include files])])
+ ###############################################################################
+ #
+ # The common unix printing system cups is used to print from java.
+ #
+ AC_ARG_WITH(cups, [AS_HELP_STRING([--with-cups],
+ [specify prefix directory for the cups package
+ (expecting the headers under PATH/include)])])
+ AC_ARG_WITH(cups-include, [AS_HELP_STRING([--with-cups-include],
+ [specify directory for the cups include files])])
-if test "x$CUPS_NOT_NEEDED" = xyes; then
- if test "x${with_cups}" != x || test "x${with_cups_include}" != x; then
- AC_MSG_WARN([cups not used, so --with-cups is ignored])
- fi
- CUPS_CFLAGS=
-else
- CUPS_FOUND=no
+ if test "x$CUPS_NOT_NEEDED" = xyes; then
+ if test "x${with_cups}" != x || test "x${with_cups_include}" != x; then
+ AC_MSG_WARN([cups not used, so --with-cups is ignored])
+ fi
+ CUPS_CFLAGS=
+ else
+ CUPS_FOUND=no
- if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno; then
- AC_MSG_ERROR([It is not possible to disable the use of cups. Remove the --without-cups option.])
- fi
+ if test "x${with_cups}" = xno || test "x${with_cups_include}" = xno; then
+ AC_MSG_ERROR([It is not possible to disable the use of cups. Remove the --without-cups option.])
+ fi
- if test "x${with_cups}" != x; then
- CUPS_CFLAGS="-I${with_cups}/include"
- CUPS_FOUND=yes
- fi
- if test "x${with_cups_include}" != x; then
- CUPS_CFLAGS="-I${with_cups_include}"
- CUPS_FOUND=yes
- fi
- if test "x$CUPS_FOUND" = xno; then
- BDEPS_CHECK_MODULE(CUPS, cups, xxx, [CUPS_FOUND=yes])
- fi
- if test "x$CUPS_FOUND" = xno; then
- # Are the cups headers installed in the default /usr/include location?
- AC_CHECK_HEADERS([cups/cups.h cups/ppd.h],
- [CUPS_FOUND=yes
- CUPS_CFLAGS=
- DEFAULT_CUPS=yes])
- fi
- if test "x$CUPS_FOUND" = xno; then
- # Getting nervous now? Lets poke around for standard Solaris third-party
- # package installation locations.
- AC_MSG_CHECKING([for cups headers])
- if test -s /opt/sfw/cups/include/cups/cups.h; then
- # An SFW package seems to be installed!
- CUPS_FOUND=yes
- CUPS_CFLAGS="-I/opt/sfw/cups/include"
- elif test -s /opt/csw/include/cups/cups.h; then
- # A CSW package seems to be installed!
- CUPS_FOUND=yes
- CUPS_CFLAGS="-I/opt/csw/include"
- fi
- AC_MSG_RESULT([$CUPS_FOUND])
- fi
- if test "x$CUPS_FOUND" = xno; then
- HELP_MSG_MISSING_DEPENDENCY([cups])
- AC_MSG_ERROR([Could not find cups! $HELP_MSG ])
- fi
-fi
+ if test "x${with_cups}" != x; then
+ CUPS_CFLAGS="-I${with_cups}/include"
+ CUPS_FOUND=yes
+ fi
+ if test "x${with_cups_include}" != x; then
+ CUPS_CFLAGS="-I${with_cups_include}"
+ CUPS_FOUND=yes
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ BDEPS_CHECK_MODULE(CUPS, cups, xxx, [CUPS_FOUND=yes])
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ # Are the cups headers installed in the default /usr/include location?
+ AC_CHECK_HEADERS([cups/cups.h cups/ppd.h],
+ [
+ CUPS_FOUND=yes
+ CUPS_CFLAGS=
+ DEFAULT_CUPS=yes
+ ]
+ )
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ # Getting nervous now? Lets poke around for standard Solaris third-party
+ # package installation locations.
+ AC_MSG_CHECKING([for cups headers])
+ if test -s /opt/sfw/cups/include/cups/cups.h; then
+ # An SFW package seems to be installed!
+ CUPS_FOUND=yes
+ CUPS_CFLAGS="-I/opt/sfw/cups/include"
+ elif test -s /opt/csw/include/cups/cups.h; then
+ # A CSW package seems to be installed!
+ CUPS_FOUND=yes
+ CUPS_CFLAGS="-I/opt/csw/include"
+ fi
+ AC_MSG_RESULT([$CUPS_FOUND])
+ fi
+ if test "x$CUPS_FOUND" = xno; then
+ HELP_MSG_MISSING_DEPENDENCY([cups])
+ AC_MSG_ERROR([Could not find cups! $HELP_MSG ])
+ fi
+ fi
-AC_SUBST(CUPS_CFLAGS)
+ AC_SUBST(CUPS_CFLAGS)
])
AC_DEFUN_ONCE([LIB_SETUP_FREETYPE],
[
-###############################################################################
-#
-# The ubiquitous freetype2 library is used to render fonts.
-#
-AC_ARG_WITH(freetype, [AS_HELP_STRING([--with-freetype],
- [specify prefix directory for the freetype2 package
- (expecting the libraries under PATH/lib and the headers under PATH/include)])])
+ ###############################################################################
+ #
+ # The ubiquitous freetype2 library is used to render fonts.
+ #
+ AC_ARG_WITH(freetype, [AS_HELP_STRING([--with-freetype],
+ [specify prefix directory for the freetype2 package
+ (expecting the libraries under PATH/lib and the headers under PATH/include)])])
-# If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree
-USING_SYSTEM_FT_LIB=false
+ # If we are using the OS installed system lib for freetype, then we do not need to copy it to the build tree
+ USING_SYSTEM_FT_LIB=false
-if test "x$FREETYPE2_NOT_NEEDED" = xyes; then
- if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then
- AC_MSG_WARN([freetype not used, so --with-freetype is ignored])
- fi
- FREETYPE2_CFLAGS=
- FREETYPE2_LIBS=
- FREETYPE2_LIB_PATH=
-else
- FREETYPE2_FOUND=no
+ if test "x$FREETYPE2_NOT_NEEDED" = xyes; then
+ if test "x$with_freetype" != x || test "x$with_freetype_include" != x || test "x$with_freetype_lib" != x; then
+ AC_MSG_WARN([freetype not used, so --with-freetype is ignored])
+ fi
+ FREETYPE2_CFLAGS=
+ FREETYPE2_LIBS=
+ FREETYPE2_LIB_PATH=
+ else
+ FREETYPE2_FOUND=no
- if test "x$with_freetype" != x; then
- BASIC_FIXUP_PATH(with_freetype)
- FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype"
- FREETYPE2_LIB_PATH="$with_freetype/lib"
- if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64 && test -d "$with_freetype/lib/amd64"; then
- FREETYPE2_LIBS="-L$with_freetype/lib/amd64 -lfreetype"
- FREETYPE2_LIB_PATH="$with_freetype/lib/amd64"
- fi
- if test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPE2_LIBS="$with_freetype/lib/freetype.lib"
- fi
- FREETYPE2_CFLAGS="-I$with_freetype/include"
- if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then
- FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include"
- fi
- FREETYPE2_FOUND=yes
- if test "x$FREETYPE2_FOUND" = xyes; then
- # Verify that the directories exist
- if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then
- AC_MSG_ERROR([Could not find the expected directories $with_freetype/lib and $with_freetype/include])
- fi
- # List the contents of the lib.
- FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null`
- if test "x$FREETYPELIB" = x; then
- AC_MSG_ERROR([Could not find libfreetype.so nor freetype.dll in $with_freetype/lib])
- fi
- # Check one h-file
- if ! test -s "$with_freetype/include/ft2build.h"; then
- AC_MSG_ERROR([Could not find $with_freetype/include/ft2build.h])
- fi
- fi
+ if test "x$with_freetype" != x; then
+ BASIC_FIXUP_PATH(with_freetype)
+ FREETYPE2_LIBS="-L$with_freetype/lib -lfreetype"
+ FREETYPE2_LIB_PATH="$with_freetype/lib"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64 && test -d "$with_freetype/lib/amd64"; then
+ FREETYPE2_LIBS="-L$with_freetype/lib/amd64 -lfreetype"
+ FREETYPE2_LIB_PATH="$with_freetype/lib/amd64"
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ FREETYPE2_LIBS="$with_freetype/lib/freetype.lib"
+ fi
+ FREETYPE2_CFLAGS="-I$with_freetype/include"
+ if test -s $with_freetype/include/ft2build.h && test -d $with_freetype/include/freetype2/freetype; then
+ FREETYPE2_CFLAGS="-I$with_freetype/include/freetype2 -I$with_freetype/include"
+ fi
+ FREETYPE2_FOUND=yes
+ if test "x$FREETYPE2_FOUND" = xyes; then
+ # Verify that the directories exist
+ if ! test -d "$with_freetype/lib" || ! test -d "$with_freetype/include"; then
+ AC_MSG_ERROR([Could not find the expected directories $with_freetype/lib and $with_freetype/include])
+ fi
+ # List the contents of the lib.
+ FREETYPELIB=`ls $with_freetype/lib/libfreetype.so $with_freetype/lib/freetype.dll 2> /dev/null`
+ if test "x$FREETYPELIB" = x; then
+ AC_MSG_ERROR([Could not find libfreetype.so nor freetype.dll in $with_freetype/lib])
+ fi
+ # Check one h-file
+ if ! test -s "$with_freetype/include/ft2build.h"; then
+ AC_MSG_ERROR([Could not find $with_freetype/include/ft2build.h])
+ fi
+ fi
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+ BDEPS_CHECK_MODULE(FREETYPE2, freetype2, xxx, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no])
+ USING_SYSTEM_FT_LIB=true
+ fi
+ if test "x$FREETYPE2_FOUND" = xno && test "x$OPENJDK_TARGET_OS" = xwindows; then
+ FREETYPELOCATION="$PROGRAMFILES/GnuWin32"
+ BASIC_FIXUP_PATH(FREETYPELOCATION)
+ AC_MSG_CHECKING([for freetype in some standard windows locations])
+ if test -s "$FREETYPELOCATION/include/ft2build.h" && test -d "$FREETYPELOCATION/include/freetype2/freetype"; then
+ FREETYPE2_CFLAGS="-I$FREETYPELOCATION/include/freetype2 -I$FREETYPELOCATION/include"
+ FREETYPE2_LIBS="$FREETYPELOCATION/lib/freetype.lib"
+ FREETYPE2_LIB_PATH="$FREETYPELOCATION/lib"
+ if ! test -s "$FREETYPE2_LIBS"; then
+ AC_MSG_ERROR([Could not find $FREETYPE2_LIBS])
+ fi
+ if ! test -s "$FREETYPE2_LIB_PATH/freetype.dll"; then
+ AC_MSG_ERROR([Could not find $FREETYPE2_LIB_PATH/freetype.dll])
fi
- if test "x$FREETYPE2_FOUND" = xno; then
- BDEPS_CHECK_MODULE(FREETYPE2, freetype2, xxx, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no])
- USING_SYSTEM_FT_LIB=true
- fi
- if test "x$FREETYPE2_FOUND" = xno && test "x$OPENJDK_TARGET_OS" = xwindows; then
- FREETYPELOCATION="$PROGRAMFILES/GnuWin32"
- BASIC_FIXUP_PATH(FREETYPELOCATION)
- AC_MSG_CHECKING([for freetype in some standard windows locations])
- if test -s "$FREETYPELOCATION/include/ft2build.h" && test -d "$FREETYPELOCATION/include/freetype2/freetype"; then
- FREETYPE2_CFLAGS="-I$FREETYPELOCATION/include/freetype2 -I$FREETYPELOCATION/include"
- FREETYPE2_LIBS="$FREETYPELOCATION/lib/freetype.lib"
- FREETYPE2_LIB_PATH="$FREETYPELOCATION/lib"
- if ! test -s "$FREETYPE2_LIBS"; then
- AC_MSG_ERROR([Could not find $FREETYPE2_LIBS])
- fi
- if ! test -s "$FREETYPE2_LIB_PATH/freetype.dll"; then
- AC_MSG_ERROR([Could not find $FREETYPE2_LIB_PATH/freetype.dll])
- fi
- USING_SYSTEM_FT_LIB=true
- FREETYPE2_FOUND=yes
- fi
- AC_MSG_RESULT([$FREETYPE2_FOUND])
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
- PKG_CHECK_MODULES(FREETYPE2, freetype2, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no])
- # On solaris, pkg_check adds -lz to freetype libs, which isn't necessary for us.
- FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's/-lz//g'`
- USING_SYSTEM_FT_LIB=true
- # 64-bit libs for Solaris x86 are installed in the amd64 subdirectory, change lib to lib/amd64
- if test "x$FREETYPE2_FOUND" = xyes && test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's?/lib?/lib/amd64?g'`
- fi
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
- AC_MSG_CHECKING([for freetype in some standard locations])
-
- if test -s $SYS_ROOT/usr/X11/include/ft2build.h && test -d $SYS_ROOT/usr/X11/include/freetype2/freetype; then
- DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/X11/include/freetype2 -I$SYS_ROOT/usr/X11/include"
- DEFAULT_FREETYPE_LIBS="-L$SYS_ROOT/usr/X11/lib -lfreetype"
- fi
- if test -s $SYS_ROOT/usr/include/ft2build.h && test -d $SYS_ROOT/usr/include/freetype2/freetype; then
- DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/include/freetype2"
- DEFAULT_FREETYPE_LIBS="-lfreetype"
- fi
-
- PREV_CXXCFLAGS="$CXXFLAGS"
- PREV_LDFLAGS="$LDFLAGS"
- CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS"
- LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS"
- AC_LINK_IFELSE([AC_LANG_SOURCE([[#include<ft2build.h>
- #include FT_FREETYPE_H
- int main() { return 0; }
- ]])],
- [
- # Yes, the default cflags and libs did the trick.
- FREETYPE2_FOUND=yes
- FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS"
- FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS"
- ],
- [
- FREETYPE2_FOUND=no
- ])
- CXXCFLAGS="$PREV_CXXFLAGS"
- LDFLAGS="$PREV_LDFLAGS"
- AC_MSG_RESULT([$FREETYPE2_FOUND])
- USING_SYSTEM_FT_LIB=true
- fi
- if test "x$FREETYPE2_FOUND" = xno; then
- HELP_MSG_MISSING_DEPENDENCY([freetype2])
- AC_MSG_ERROR([Could not find freetype2! $HELP_MSG ])
- fi
+ USING_SYSTEM_FT_LIB=true
+ FREETYPE2_FOUND=yes
+ fi
+ AC_MSG_RESULT([$FREETYPE2_FOUND])
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+ PKG_CHECK_MODULES(FREETYPE2, freetype2, [FREETYPE2_FOUND=yes], [FREETYPE2_FOUND=no])
+ # On solaris, pkg_check adds -lz to freetype libs, which isn't necessary for us.
+ FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's/-lz//g'`
+ USING_SYSTEM_FT_LIB=true
+ # 64-bit libs for Solaris x86 are installed in the amd64 subdirectory, change lib to lib/amd64
+ if test "x$FREETYPE2_FOUND" = xyes && test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ FREETYPE2_LIBS=`$ECHO $FREETYPE2_LIBS | $SED 's?/lib?/lib/amd64?g'`
+ fi
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+ AC_MSG_CHECKING([for freetype in some standard locations])
+
+ if test -s $SYS_ROOT/usr/X11/include/ft2build.h && test -d $SYS_ROOT/usr/X11/include/freetype2/freetype; then
+ DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/X11/include/freetype2 -I$SYS_ROOT/usr/X11/include"
+ DEFAULT_FREETYPE_LIBS="-L$SYS_ROOT/usr/X11/lib -lfreetype"
+ fi
+ if test -s $SYS_ROOT/usr/include/ft2build.h && test -d $SYS_ROOT/usr/include/freetype2/freetype; then
+ DEFAULT_FREETYPE_CFLAGS="-I$SYS_ROOT/usr/include/freetype2"
+ DEFAULT_FREETYPE_LIBS="-lfreetype"
+ fi
- if test "x$OPENJDK_TARGET_OS" != xwindows; then
- # AC_CHECK_LIB does not support use of cl.exe
- PREV_LDFLAGS="$LDFLAGS"
- LDFLAGS="$FREETYPE2_LIBS"
- AC_CHECK_LIB(freetype, FT_Init_FreeType,
- FREETYPE2_FOUND=true,
- AC_MSG_ERROR([Could not find freetype2! $HELP_MSG ]))
- LDFLAGS="$PREV_LDFLAGS"
- fi
-fi
+ PREV_CXXCFLAGS="$CXXFLAGS"
+ PREV_LDFLAGS="$LDFLAGS"
+ CXXFLAGS="$CXXFLAGS $DEFAULT_FREETYPE_CFLAGS"
+ LDFLAGS="$LDFLAGS $DEFAULT_FREETYPE_LIBS"
+ AC_LINK_IFELSE([AC_LANG_SOURCE([[
+ #include<ft2build.h>
+ #include FT_FREETYPE_H
+ int main() { return 0; }
+ ]])],
+ [
+ # Yes, the default cflags and libs did the trick.
+ FREETYPE2_FOUND=yes
+ FREETYPE2_CFLAGS="$DEFAULT_FREETYPE_CFLAGS"
+ FREETYPE2_LIBS="$DEFAULT_FREETYPE_LIBS"
+ ],
+ [
+ FREETYPE2_FOUND=no
+ ]
+ )
+ CXXCFLAGS="$PREV_CXXFLAGS"
+ LDFLAGS="$PREV_LDFLAGS"
+ AC_MSG_RESULT([$FREETYPE2_FOUND])
+ USING_SYSTEM_FT_LIB=true
+ fi
+ if test "x$FREETYPE2_FOUND" = xno; then
+ HELP_MSG_MISSING_DEPENDENCY([freetype2])
+ AC_MSG_ERROR([Could not find freetype2! $HELP_MSG ])
+ fi
-AC_SUBST(USING_SYSTEM_FT_LIB)
-AC_SUBST(FREETYPE2_LIB_PATH)
-AC_SUBST(FREETYPE2_CFLAGS)
-AC_SUBST(FREETYPE2_LIBS)
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # AC_CHECK_LIB does not support use of cl.exe
+ PREV_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$FREETYPE2_LIBS"
+ AC_CHECK_LIB(freetype, FT_Init_FreeType,
+ FREETYPE2_FOUND=true,
+ AC_MSG_ERROR([Could not find freetype2! $HELP_MSG ]))
+ LDFLAGS="$PREV_LDFLAGS"
+ fi
+ fi
+ AC_SUBST(USING_SYSTEM_FT_LIB)
+ AC_SUBST(FREETYPE2_LIB_PATH)
+ AC_SUBST(FREETYPE2_CFLAGS)
+ AC_SUBST(FREETYPE2_LIBS)
])
AC_DEFUN_ONCE([LIB_SETUP_ALSA],
[
-###############################################################################
-#
-# Check for alsa headers and libraries. Used on Linux/GNU systems.
-#
-AC_ARG_WITH(alsa, [AS_HELP_STRING([--with-alsa],
- [specify prefix directory for the alsa package
- (expecting the libraries under PATH/lib and the headers under PATH/include)])])
-AC_ARG_WITH(alsa-include, [AS_HELP_STRING([--with-alsa-include],
- [specify directory for the alsa include files])])
-AC_ARG_WITH(alsa-lib, [AS_HELP_STRING([--with-alsa-lib],
- [specify directory for the alsa library])])
+ ###############################################################################
+ #
+ # Check for alsa headers and libraries. Used on Linux/GNU systems.
+ #
+ AC_ARG_WITH(alsa, [AS_HELP_STRING([--with-alsa],
+ [specify prefix directory for the alsa package
+ (expecting the libraries under PATH/lib and the headers under PATH/include)])])
+ AC_ARG_WITH(alsa-include, [AS_HELP_STRING([--with-alsa-include],
+ [specify directory for the alsa include files])])
+ AC_ARG_WITH(alsa-lib, [AS_HELP_STRING([--with-alsa-lib],
+ [specify directory for the alsa library])])
-if test "x$ALSA_NOT_NEEDED" = xyes; then
- if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then
- AC_MSG_WARN([alsa not used, so --with-alsa is ignored])
- fi
- ALSA_CFLAGS=
- ALSA_LIBS=
-else
- ALSA_FOUND=no
+ if test "x$ALSA_NOT_NEEDED" = xyes; then
+ if test "x${with_alsa}" != x || test "x${with_alsa_include}" != x || test "x${with_alsa_lib}" != x; then
+ AC_MSG_WARN([alsa not used, so --with-alsa is ignored])
+ fi
+ ALSA_CFLAGS=
+ ALSA_LIBS=
+ else
+ ALSA_FOUND=no
- if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then
- AC_MSG_ERROR([It is not possible to disable the use of alsa. Remove the --without-alsa option.])
- fi
+ if test "x${with_alsa}" = xno || test "x${with_alsa_include}" = xno || test "x${with_alsa_lib}" = xno; then
+ AC_MSG_ERROR([It is not possible to disable the use of alsa. Remove the --without-alsa option.])
+ fi
- if test "x${with_alsa}" != x; then
- ALSA_LIBS="-L${with_alsa}/lib -lalsa"
- ALSA_CFLAGS="-I${with_alsa}/include"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_include}" != x; then
- ALSA_CFLAGS="-I${with_alsa_include}"
- ALSA_FOUND=yes
- fi
- if test "x${with_alsa_lib}" != x; then
- ALSA_LIBS="-L${with_alsa_lib} -lalsa"
- ALSA_FOUND=yes
- fi
- if test "x$ALSA_FOUND" = xno; then
- BDEPS_CHECK_MODULE(ALSA, alsa, xxx, [ALSA_FOUND=yes], [ALSA_FOUND=no])
- fi
- if test "x$ALSA_FOUND" = xno; then
- PKG_CHECK_MODULES(ALSA, alsa, [ALSA_FOUND=yes], [ALSA_FOUND=no])
- fi
- if test "x$ALSA_FOUND" = xno; then
- AC_CHECK_HEADERS([alsa/asoundlib.h],
- [ALSA_FOUND=yes
- ALSA_CFLAGS=-Iignoreme
- ALSA_LIBS=-lasound
- DEFAULT_ALSA=yes],
- [ALSA_FOUND=no])
- fi
- if test "x$ALSA_FOUND" = xno; then
- HELP_MSG_MISSING_DEPENDENCY([alsa])
- AC_MSG_ERROR([Could not find alsa! $HELP_MSG ])
- fi
-fi
+ if test "x${with_alsa}" != x; then
+ ALSA_LIBS="-L${with_alsa}/lib -lalsa"
+ ALSA_CFLAGS="-I${with_alsa}/include"
+ ALSA_FOUND=yes
+ fi
+ if test "x${with_alsa_include}" != x; then
+ ALSA_CFLAGS="-I${with_alsa_include}"
+ ALSA_FOUND=yes
+ fi
+ if test "x${with_alsa_lib}" != x; then
+ ALSA_LIBS="-L${with_alsa_lib} -lalsa"
+ ALSA_FOUND=yes
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+ BDEPS_CHECK_MODULE(ALSA, alsa, xxx, [ALSA_FOUND=yes], [ALSA_FOUND=no])
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+ PKG_CHECK_MODULES(ALSA, alsa, [ALSA_FOUND=yes], [ALSA_FOUND=no])
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+ AC_CHECK_HEADERS([alsa/asoundlib.h],
+ [
+ ALSA_FOUND=yes
+ ALSA_CFLAGS=-Iignoreme
+ ALSA_LIBS=-lasound
+ DEFAULT_ALSA=yes
+ ],
+ [ALSA_FOUND=no])
+ fi
+ if test "x$ALSA_FOUND" = xno; then
+ HELP_MSG_MISSING_DEPENDENCY([alsa])
+ AC_MSG_ERROR([Could not find alsa! $HELP_MSG ])
+ fi
+ fi
-AC_SUBST(ALSA_CFLAGS)
-AC_SUBST(ALSA_LIBS)
-
+ AC_SUBST(ALSA_CFLAGS)
+ AC_SUBST(ALSA_LIBS)
])
AC_DEFUN_ONCE([LIB_SETUP_MISC_LIBS],
[
-###############################################################################
-#
-# Check for the jpeg library
-#
+ ###############################################################################
+ #
+ # Check for the jpeg library
+ #
-USE_EXTERNAL_LIBJPEG=true
-AC_CHECK_LIB(jpeg, main, [],
- [ USE_EXTERNAL_LIBJPEG=false
- AC_MSG_NOTICE([Will use jpeg decoder bundled with the OpenJDK source])
- ])
-AC_SUBST(USE_EXTERNAL_LIBJPEG)
-
-###############################################################################
-#
-# Check for the gif library
-#
+ USE_EXTERNAL_LIBJPEG=true
+ AC_CHECK_LIB(jpeg, main, [],
+ [ USE_EXTERNAL_LIBJPEG=false
+ AC_MSG_NOTICE([Will use jpeg decoder bundled with the OpenJDK source])
+ ])
+ AC_SUBST(USE_EXTERNAL_LIBJPEG)
-AC_ARG_WITH(giflib, [AS_HELP_STRING([--with-giflib],
- [use giflib from build system or OpenJDK source (system, bundled) @<:@bundled@:>@])])
+ ###############################################################################
+ #
+ # Check for the gif library
+ #
+
+ AC_ARG_WITH(giflib, [AS_HELP_STRING([--with-giflib],
+ [use giflib from build system or OpenJDK source (system, bundled) @<:@bundled@:>@])])
-AC_MSG_CHECKING([for which giflib to use])
+ AC_MSG_CHECKING([for which giflib to use])
-# default is bundled
-DEFAULT_GIFLIB=bundled
+ # default is bundled
+ DEFAULT_GIFLIB=bundled
-#
-# if user didn't specify, use DEFAULT_GIFLIB
-#
-if test "x${with_giflib}" = "x"; then
+ #
+ # if user didn't specify, use DEFAULT_GIFLIB
+ #
+ if test "x${with_giflib}" = "x"; then
with_giflib=${DEFAULT_GIFLIB}
-fi
+ fi
-AC_MSG_RESULT(${with_giflib})
+ AC_MSG_RESULT(${with_giflib})
-if test "x${with_giflib}" = "xbundled"; then
+ if test "x${with_giflib}" = "xbundled"; then
USE_EXTERNAL_LIBGIF=false
-elif test "x${with_giflib}" = "xsystem"; then
+ elif test "x${with_giflib}" = "xsystem"; then
AC_CHECK_HEADER(gif_lib.h, [],
- [ AC_MSG_ERROR([--with-giflib=system specified, but gif_lib.h not found!])])
+ [ AC_MSG_ERROR([--with-giflib=system specified, but gif_lib.h not found!])])
AC_CHECK_LIB(gif, DGifGetCode, [],
- [ AC_MSG_ERROR([--with-giflib=system specified, but no giflib found!])])
+ [ AC_MSG_ERROR([--with-giflib=system specified, but no giflib found!])])
USE_EXTERNAL_LIBGIF=true
-else
+ else
AC_MSG_ERROR([Invalid value of --with-giflib: ${with_giflib}, use 'system' or 'bundled'])
-fi
-AC_SUBST(USE_EXTERNAL_LIBGIF)
+ fi
+ AC_SUBST(USE_EXTERNAL_LIBGIF)
-###############################################################################
-#
-# Check for the zlib library
-#
+ ###############################################################################
+ #
+ # Check for the zlib library
+ #
-AC_ARG_WITH(zlib, [AS_HELP_STRING([--with-zlib],
- [use zlib from build system or OpenJDK source (system, bundled) @<:@bundled@:>@])])
+ AC_ARG_WITH(zlib, [AS_HELP_STRING([--with-zlib],
+ [use zlib from build system or OpenJDK source (system, bundled) @<:@bundled@:>@])])
-AC_CHECK_LIB(z, compress,
- [ ZLIB_FOUND=yes ],
- [ ZLIB_FOUND=no ])
+ AC_CHECK_LIB(z, compress,
+ [ ZLIB_FOUND=yes ],
+ [ ZLIB_FOUND=no ])
-AC_MSG_CHECKING([for which zlib to use])
+ AC_MSG_CHECKING([for which zlib to use])
-DEFAULT_ZLIB=bundled
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
-#
-# On macosx default is system...on others default is
-#
+ DEFAULT_ZLIB=bundled
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ #
+ # On macosx default is system...on others default is
+ #
DEFAULT_ZLIB=system
-fi
+ fi
-if test "x${ZLIB_FOUND}" != "xyes"; then
-#
-# If we don't find any system...set default to bundled
-#
+ if test "x${ZLIB_FOUND}" != "xyes"; then
+ #
+ # If we don't find any system...set default to bundled
+ #
DEFAULT_ZLIB=bundled
-fi
+ fi
-#
-# If user didn't specify, use DEFAULT_ZLIB
-#
-if test "x${with_zlib}" = "x"; then
+ #
+ # If user didn't specify, use DEFAULT_ZLIB
+ #
+ if test "x${with_zlib}" = "x"; then
with_zlib=${DEFAULT_ZLIB}
-fi
+ fi
-if test "x${with_zlib}" = "xbundled"; then
+ if test "x${with_zlib}" = "xbundled"; then
USE_EXTERNAL_LIBZ=false
AC_MSG_RESULT([bundled])
-elif test "x${with_zlib}" = "xsystem"; then
+ elif test "x${with_zlib}" = "xsystem"; then
if test "x${ZLIB_FOUND}" = "xyes"; then
- USE_EXTERNAL_LIBZ=true
- AC_MSG_RESULT([system])
+ USE_EXTERNAL_LIBZ=true
+ AC_MSG_RESULT([system])
else
- AC_MSG_RESULT([system not found])
- AC_MSG_ERROR([--with-zlib=system specified, but no zlib found!])
+ AC_MSG_RESULT([system not found])
+ AC_MSG_ERROR([--with-zlib=system specified, but no zlib found!])
fi
-else
- AC_MSG_ERROR([Invalid value for --with-zlib: ${with_zlib}, use 'system' or 'bundled'])
-fi
+ else
+ AC_MSG_ERROR([Invalid value for --with-zlib: ${with_zlib}, use 'system' or 'bundled'])
+ fi
-AC_SUBST(USE_EXTERNAL_LIBZ)
+ AC_SUBST(USE_EXTERNAL_LIBZ)
-###############################################################################
-LIBZIP_CAN_USE_MMAP=true
+ ###############################################################################
+ LIBZIP_CAN_USE_MMAP=true
-AC_SUBST(LIBZIP_CAN_USE_MMAP)
+ AC_SUBST(LIBZIP_CAN_USE_MMAP)
-###############################################################################
-#
-# Check if altzone exists in time.h
-#
+ ###############################################################################
+ #
+ # Check if altzone exists in time.h
+ #
-AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <time.h>], [return (int)altzone;])],
- [has_altzone=yes],
- [has_altzone=no])
-if test "x$has_altzone" = xyes; then
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <time.h>], [return (int)altzone;])],
+ [has_altzone=yes],
+ [has_altzone=no])
+ if test "x$has_altzone" = xyes; then
AC_DEFINE([HAVE_ALTZONE], 1, [Define if you have the external 'altzone' variable in time.h])
-fi
+ fi
-###############################################################################
-#
-# Check the maths library
-#
+ ###############################################################################
+ #
+ # Check the maths library
+ #
-AC_CHECK_LIB(m, cos, [],
- [
- AC_MSG_NOTICE([Maths library was not found])
- ])
-AC_SUBST(LIBM)
+ AC_CHECK_LIB(m, cos, [],
+ [
+ AC_MSG_NOTICE([Maths library was not found])
+ ]
+ )
+ AC_SUBST(LIBM)
-###############################################################################
-#
-# Check for libdl.so
+ ###############################################################################
+ #
+ # Check for libdl.so
-save_LIBS="$LIBS"
-LIBS=""
-AC_CHECK_LIB(dl,dlopen)
-LIBDL="$LIBS"
-AC_SUBST(LIBDL)
-LIBS="$save_LIBS"
-
+ save_LIBS="$LIBS"
+ LIBS=""
+ AC_CHECK_LIB(dl,dlopen)
+ LIBDL="$LIBS"
+ AC_SUBST(LIBDL)
+ LIBS="$save_LIBS"
])
AC_DEFUN_ONCE([LIB_SETUP_STATIC_LINK_LIBSTDCPP],
[
-###############################################################################
-#
-# statically link libstdc++ before C++ ABI is stablized on Linux unless
-# dynamic build is configured on command line.
-#
-AC_ARG_WITH([stdc++lib], [AS_HELP_STRING([--with-stdc++lib=<static>,<dynamic>,<default>],
- [force linking of the C++ runtime on Linux to either static or dynamic, default is static with dynamic as fallback])],
- [
- if test "x$with_stdc__lib" != xdynamic && test "x$with_stdc__lib" != xstatic \
- && test "x$with_stdc__lib" != xdefault; then
- AC_MSG_ERROR([Bad parameter value --with-stdc++lib=$with_stdc__lib!])
- fi
- ],
- [with_stdc__lib=default]
-)
+ ###############################################################################
+ #
+ # statically link libstdc++ before C++ ABI is stablized on Linux unless
+ # dynamic build is configured on command line.
+ #
+ AC_ARG_WITH([stdc++lib], [AS_HELP_STRING([--with-stdc++lib=<static>,<dynamic>,<default>],
+ [force linking of the C++ runtime on Linux to either static or dynamic, default is static with dynamic as fallback])],
+ [
+ if test "x$with_stdc__lib" != xdynamic && test "x$with_stdc__lib" != xstatic \
+ && test "x$with_stdc__lib" != xdefault; then
+ AC_MSG_ERROR([Bad parameter value --with-stdc++lib=$with_stdc__lib!])
+ fi
+ ],
+ [with_stdc__lib=default]
+ )
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
# Test if -lstdc++ works.
AC_MSG_CHECKING([if dynamic link of stdc++ is possible])
AC_LANG_PUSH(C++)
OLD_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -lstdc++"
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [return 0;])],
- [has_dynamic_libstdcxx=yes],
- [has_dynamic_libstdcxx=no])
+ [has_dynamic_libstdcxx=yes],
+ [has_dynamic_libstdcxx=no])
CXXFLAGS="$OLD_CXXFLAGS"
AC_LANG_POP(C++)
AC_MSG_RESULT([$has_dynamic_libstdcxx])
@@ -668,55 +675,55 @@
OLD_LIBS="$LIBS"
OLD_CXX="$CXX"
LIBS="$STATIC_STDCXX_FLAGS"
- CXX="$CC"
+ CXX="$CC"
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [return 0;])],
- [has_static_libstdcxx=yes],
- [has_static_libstdcxx=no])
+ [has_static_libstdcxx=yes],
+ [has_static_libstdcxx=no])
LIBS="$OLD_LIBS"
CXX="$OLD_CXX"
AC_LANG_POP(C++)
AC_MSG_RESULT([$has_static_libstdcxx])
if test "x$has_static_libstdcxx" = xno && test "x$has_dynamic_libstdcxx" = xno; then
- AC_MSG_ERROR([Cannot link to stdc++, neither dynamically nor statically!])
+ AC_MSG_ERROR([Cannot link to stdc++, neither dynamically nor statically!])
fi
if test "x$with_stdc__lib" = xstatic && test "x$has_static_libstdcxx" = xno; then
- AC_MSG_ERROR([Static linking of libstdc++ was not possible!])
+ AC_MSG_ERROR([Static linking of libstdc++ was not possible!])
fi
if test "x$with_stdc__lib" = xdynamic && test "x$has_dynamic_libstdcxx" = xno; then
- AC_MSG_ERROR([Dynamic linking of libstdc++ was not possible!])
+ AC_MSG_ERROR([Dynamic linking of libstdc++ was not possible!])
fi
AC_MSG_CHECKING([how to link with libstdc++])
# If dynamic was requested, it's available since it would fail above otherwise.
# If dynamic wasn't requested, go with static unless it isn't available.
if test "x$with_stdc__lib" = xdynamic || test "x$has_static_libstdcxx" = xno || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
- LIBCXX="$LIBCXX -lstdc++"
- LDCXX="$CXX"
- STATIC_CXX_SETTING="STATIC_CXX=false"
- AC_MSG_RESULT([dynamic])
+ LIBCXX="$LIBCXX -lstdc++"
+ LDCXX="$CXX"
+ STATIC_CXX_SETTING="STATIC_CXX=false"
+ AC_MSG_RESULT([dynamic])
else
- LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS"
- LDCXX="$CC"
- STATIC_CXX_SETTING="STATIC_CXX=true"
- AC_MSG_RESULT([static])
+ LIBCXX="$LIBCXX $STATIC_STDCXX_FLAGS"
+ LDCXX="$CC"
+ STATIC_CXX_SETTING="STATIC_CXX=true"
+ AC_MSG_RESULT([static])
fi
-fi
-AC_SUBST(STATIC_CXX_SETTING)
+ fi
+ AC_SUBST(STATIC_CXX_SETTING)
-if test "x$JVM_VARIANT_ZERO" = xtrue || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ if test "x$JVM_VARIANT_ZERO" = xtrue || test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
# Figure out LIBFFI_CFLAGS and LIBFFI_LIBS
PKG_CHECK_MODULES([LIBFFI], [libffi])
-fi
+ fi
-if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
+ if test "x$JVM_VARIANT_ZEROSHARK" = xtrue; then
AC_CHECK_PROG([LLVM_CONFIG], [llvm-config], [llvm-config])
if test "x$LLVM_CONFIG" != xllvm-config; then
- AC_MSG_ERROR([llvm-config not found in $PATH.])
+ AC_MSG_ERROR([llvm-config not found in $PATH.])
fi
llvm_components="jit mcjit engine nativecodegen native"
@@ -757,18 +764,17 @@
AC_SUBST(LLVM_CFLAGS)
AC_SUBST(LLVM_LDFLAGS)
AC_SUBST(LLVM_LIBS)
-fi
+ fi
-# libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
-if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
+ # libCrun is the c++ runtime-library with SunStudio (roughly the equivalent of gcc's libstdc++.so)
+ if test "x$OPENJDK_TARGET_OS" = xsolaris && test "x$LIBCXX" = x; then
LIBCXX="/usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libCrun.so.1"
-fi
+ fi
-# TODO better (platform agnostic) test
-if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then
+ # TODO better (platform agnostic) test
+ if test "x$OPENJDK_TARGET_OS" = xmacosx && test "x$LIBCXX" = x && test "x$GCC" = xyes; then
LIBCXX="-lstdc++"
-fi
+ fi
-AC_SUBST(LIBCXX)
-
+ AC_SUBST(LIBCXX)
])
--- a/common/autoconf/platform.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/platform.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -53,37 +53,37 @@
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
powerpc64)
VAR_CPU=ppc64
VAR_CPU_ARCH=ppc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390)
VAR_CPU=s390
VAR_CPU_ARCH=s390
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
s390x)
VAR_CPU=s390x
VAR_CPU_ARCH=s390
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparc)
VAR_CPU=sparc
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=32
VAR_CPU_ENDIAN=big
- ;;
+ ;;
sparcv9)
VAR_CPU=sparcv9
VAR_CPU_ARCH=sparc
VAR_CPU_BITS=64
VAR_CPU_ENDIAN=big
- ;;
+ ;;
*)
AC_MSG_ERROR([unsupported cpu $1])
;;
@@ -140,56 +140,56 @@
# OPENJDK_BUILD_OS, etc.
AC_DEFUN([PLATFORM_EXTRACT_TARGET_AND_BUILD],
[
- # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
- # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
- # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
- # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
- OPENJDK_TARGET_AUTOCONF_NAME="$host"
- OPENJDK_BUILD_AUTOCONF_NAME="$build"
- AC_SUBST(OPENJDK_TARGET_AUTOCONF_NAME)
- AC_SUBST(OPENJDK_BUILD_AUTOCONF_NAME)
+ # Copy the autoconf trip/quadruplet verbatim to OPENJDK_TARGET_AUTOCONF_NAME
+ # (from the autoconf "host") and OPENJDK_BUILD_AUTOCONF_NAME
+ # Note that we might later on rewrite e.g. OPENJDK_TARGET_CPU due to reduced build,
+ # but this will not change the value of OPENJDK_TARGET_AUTOCONF_NAME.
+ OPENJDK_TARGET_AUTOCONF_NAME="$host"
+ OPENJDK_BUILD_AUTOCONF_NAME="$build"
+ AC_SUBST(OPENJDK_TARGET_AUTOCONF_NAME)
+ AC_SUBST(OPENJDK_BUILD_AUTOCONF_NAME)
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
- PLATFORM_EXTRACT_VARS_FROM_OS($build_os)
- PLATFORM_EXTRACT_VARS_FROM_CPU($build_cpu)
- # ..and setup our own variables. (Do this explicitely to facilitate searching)
- OPENJDK_BUILD_OS="$VAR_OS"
- OPENJDK_BUILD_OS_API="$VAR_OS_API"
- OPENJDK_BUILD_OS_ENV="$VAR_OS_ENV"
- OPENJDK_BUILD_CPU="$VAR_CPU"
- OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
- AC_SUBST(OPENJDK_BUILD_OS)
- AC_SUBST(OPENJDK_BUILD_OS_API)
- AC_SUBST(OPENJDK_BUILD_CPU)
- AC_SUBST(OPENJDK_BUILD_CPU_ARCH)
- AC_SUBST(OPENJDK_BUILD_CPU_BITS)
- AC_SUBST(OPENJDK_BUILD_CPU_ENDIAN)
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ PLATFORM_EXTRACT_VARS_FROM_OS($build_os)
+ PLATFORM_EXTRACT_VARS_FROM_CPU($build_cpu)
+ # ..and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_BUILD_OS="$VAR_OS"
+ OPENJDK_BUILD_OS_API="$VAR_OS_API"
+ OPENJDK_BUILD_OS_ENV="$VAR_OS_ENV"
+ OPENJDK_BUILD_CPU="$VAR_CPU"
+ OPENJDK_BUILD_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_BUILD_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_BUILD_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+ AC_SUBST(OPENJDK_BUILD_OS)
+ AC_SUBST(OPENJDK_BUILD_OS_API)
+ AC_SUBST(OPENJDK_BUILD_CPU)
+ AC_SUBST(OPENJDK_BUILD_CPU_ARCH)
+ AC_SUBST(OPENJDK_BUILD_CPU_BITS)
+ AC_SUBST(OPENJDK_BUILD_CPU_ENDIAN)
- AC_MSG_CHECKING([openjdk-build os-cpu])
- AC_MSG_RESULT([$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU])
+ AC_MSG_CHECKING([openjdk-build os-cpu])
+ AC_MSG_RESULT([$OPENJDK_BUILD_OS-$OPENJDK_BUILD_CPU])
- # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
- PLATFORM_EXTRACT_VARS_FROM_OS($host_os)
- PLATFORM_EXTRACT_VARS_FROM_CPU($host_cpu)
- # ... and setup our own variables. (Do this explicitely to facilitate searching)
- OPENJDK_TARGET_OS="$VAR_OS"
- OPENJDK_TARGET_OS_API="$VAR_OS_API"
- OPENJDK_TARGET_OS_ENV="$VAR_OS_ENV"
- OPENJDK_TARGET_CPU="$VAR_CPU"
- OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
- OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
- OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
- AC_SUBST(OPENJDK_TARGET_OS)
- AC_SUBST(OPENJDK_TARGET_OS_API)
- AC_SUBST(OPENJDK_TARGET_CPU)
- AC_SUBST(OPENJDK_TARGET_CPU_ARCH)
- AC_SUBST(OPENJDK_TARGET_CPU_BITS)
- AC_SUBST(OPENJDK_TARGET_CPU_ENDIAN)
+ # Convert the autoconf OS/CPU value to our own data, into the VAR_OS/CPU variables.
+ PLATFORM_EXTRACT_VARS_FROM_OS($host_os)
+ PLATFORM_EXTRACT_VARS_FROM_CPU($host_cpu)
+ # ... and setup our own variables. (Do this explicitely to facilitate searching)
+ OPENJDK_TARGET_OS="$VAR_OS"
+ OPENJDK_TARGET_OS_API="$VAR_OS_API"
+ OPENJDK_TARGET_OS_ENV="$VAR_OS_ENV"
+ OPENJDK_TARGET_CPU="$VAR_CPU"
+ OPENJDK_TARGET_CPU_ARCH="$VAR_CPU_ARCH"
+ OPENJDK_TARGET_CPU_BITS="$VAR_CPU_BITS"
+ OPENJDK_TARGET_CPU_ENDIAN="$VAR_CPU_ENDIAN"
+ AC_SUBST(OPENJDK_TARGET_OS)
+ AC_SUBST(OPENJDK_TARGET_OS_API)
+ AC_SUBST(OPENJDK_TARGET_CPU)
+ AC_SUBST(OPENJDK_TARGET_CPU_ARCH)
+ AC_SUBST(OPENJDK_TARGET_CPU_BITS)
+ AC_SUBST(OPENJDK_TARGET_CPU_ENDIAN)
- AC_MSG_CHECKING([openjdk-target os-cpu])
- AC_MSG_RESULT([$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU])
+ AC_MSG_CHECKING([openjdk-target os-cpu])
+ AC_MSG_RESULT([$OPENJDK_TARGET_OS-$OPENJDK_TARGET_CPU])
])
# Check if a reduced build (32-bit on 64-bit platforms) is requested, and modify behaviour
@@ -198,7 +198,7 @@
AC_DEFUN([PLATFORM_SETUP_TARGET_CPU_BITS],
[
AC_ARG_WITH(target-bits, [AS_HELP_STRING([--with-target-bits],
- [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-target-bits=32 @<:@guessed@:>@])])
+ [build 32-bit or 64-bit binaries (for platforms that support it), e.g. --with-target-bits=32 @<:@guessed@:>@])])
# We have three types of compiles:
# native == normal compilation, target system == build system
@@ -227,7 +227,7 @@
OPENJDK_TARGET_CPU=sparc
else
AC_MSG_ERROR([Reduced build (--with-target-bits=32) is only supported on x86_64 and sparcv9])
- fi
+ fi
elif test "x$with_target_bits" = x64 && test "x$OPENJDK_TARGET_CPU_BITS" = x32; then
AC_MSG_ERROR([It is not possible to use --with-target-bits=64 on a 32 bit system. Use proper cross-compilation instead.])
elif test "x$with_target_bits" = "x$OPENJDK_TARGET_CPU_BITS"; then
@@ -238,184 +238,183 @@
fi
AC_SUBST(COMPILE_TYPE)
-AC_MSG_CHECKING([compilation type])
-AC_MSG_RESULT([$COMPILE_TYPE])
+ AC_MSG_CHECKING([compilation type])
+ AC_MSG_RESULT([$COMPILE_TYPE])
])
- # Setup the legacy variables, for controlling the old makefiles.
- #
+# Setup the legacy variables, for controlling the old makefiles.
+#
AC_DEFUN([PLATFORM_SETUP_LEGACY_VARS],
[
- # Also store the legacy naming of the cpu.
- # Ie i586 and amd64 instead of x86 and x86_64
- OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY="i586"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except MacOSX replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_LEGACY="amd64"
- fi
- AC_SUBST(OPENJDK_TARGET_CPU_LEGACY)
+ # Also store the legacy naming of the cpu.
+ # Ie i586 and amd64 instead of x86 and x86_64
+ OPENJDK_TARGET_CPU_LEGACY="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY="i586"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except MacOSX replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_LEGACY="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LEGACY)
- # And the second legacy naming of the cpu.
- # Ie i386 and amd64 instead of x86 and x86_64.
- OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
- elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
- fi
- AC_SUBST(OPENJDK_TARGET_CPU_LEGACY_LIB)
+ # And the second legacy naming of the cpu.
+ # Ie i386 and amd64 instead of x86 and x86_64.
+ OPENJDK_TARGET_CPU_LEGACY_LIB="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="i386"
+ elif test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_LEGACY_LIB="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LEGACY_LIB)
- # This is the name of the cpu (but using i386 and amd64 instead of
- # x86 and x86_64, respectively), preceeded by a /, to be used when
- # locating libraries. On macosx, it's empty, though.
- OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
- if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- OPENJDK_TARGET_CPU_LIBDIR=""
- fi
- AC_SUBST(OPENJDK_TARGET_CPU_LIBDIR)
+ # This is the name of the cpu (but using i386 and amd64 instead of
+ # x86 and x86_64, respectively), preceeded by a /, to be used when
+ # locating libraries. On macosx, it's empty, though.
+ OPENJDK_TARGET_CPU_LIBDIR="/$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ OPENJDK_TARGET_CPU_LIBDIR=""
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_LIBDIR)
- # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
- # /amd64 or /sparcv9. This string is appended to some library paths, like this:
- # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
- OPENJDK_TARGET_CPU_ISADIR=""
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- OPENJDK_TARGET_CPU_ISADIR="/amd64"
- elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
- OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
- fi
+ # OPENJDK_TARGET_CPU_ISADIR is normally empty. On 64-bit Solaris systems, it is set to
+ # /amd64 or /sparcv9. This string is appended to some library paths, like this:
+ # /usr/lib${OPENJDK_TARGET_CPU_ISADIR}/libexample.so
+ OPENJDK_TARGET_CPU_ISADIR=""
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ OPENJDK_TARGET_CPU_ISADIR="/amd64"
+ elif test "x$OPENJDK_TARGET_CPU" = xsparcv9; then
+ OPENJDK_TARGET_CPU_ISADIR="/sparcv9"
fi
- AC_SUBST(OPENJDK_TARGET_CPU_ISADIR)
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_ISADIR)
- # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
- OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
- # On linux only, we replace x86 with i386.
- OPENJDK_TARGET_CPU_OSARCH="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_OSARCH="amd64"
- fi
- AC_SUBST(OPENJDK_TARGET_CPU_OSARCH)
+ # Setup OPENJDK_TARGET_CPU_OSARCH, which is used to set the os.arch Java system property
+ OPENJDK_TARGET_CPU_OSARCH="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_OS" = xlinux && test "x$OPENJDK_TARGET_CPU" = xx86; then
+ # On linux only, we replace x86 with i386.
+ OPENJDK_TARGET_CPU_OSARCH="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_OSARCH="amd64"
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_OSARCH)
- OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- OPENJDK_TARGET_CPU_JLI="i386"
- elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
- # On all platforms except macosx, we replace x86_64 with amd64.
- OPENJDK_TARGET_CPU_JLI="amd64"
+ OPENJDK_TARGET_CPU_JLI="$OPENJDK_TARGET_CPU"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ OPENJDK_TARGET_CPU_JLI="i386"
+ elif test "x$OPENJDK_TARGET_OS" != xmacosx && test "x$OPENJDK_TARGET_CPU" = xx86_64; then
+ # On all platforms except macosx, we replace x86_64 with amd64.
+ OPENJDK_TARGET_CPU_JLI="amd64"
+ fi
+ # Now setup the -D flags for building libjli.
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
+ elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
+ OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
fi
- # Now setup the -D flags for building libjli.
- OPENJDK_TARGET_CPU_JLI_CFLAGS="-DLIBARCHNAME='\"$OPENJDK_TARGET_CPU_JLI\"'"
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- if test "x$OPENJDK_TARGET_CPU_ARCH" = xsparc; then
- OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"sparc\"' -DLIBARCH64NAME='\"sparcv9\"'"
- elif test "x$OPENJDK_TARGET_CPU_ARCH" = xx86; then
- OPENJDK_TARGET_CPU_JLI_CFLAGS="$OPENJDK_TARGET_CPU_JLI_CFLAGS -DLIBARCH32NAME='\"i386\"' -DLIBARCH64NAME='\"amd64\"'"
- fi
- fi
- AC_SUBST(OPENJDK_TARGET_CPU_JLI_CFLAGS)
+ fi
+ AC_SUBST(OPENJDK_TARGET_CPU_JLI_CFLAGS)
- # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
- if test "x$OPENJDK_TARGET_OS_API" = xposix; then
- OPENJDK_TARGET_OS_API_DIR="solaris"
- fi
- if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
- OPENJDK_TARGET_OS_API_DIR="windows"
- fi
- AC_SUBST(OPENJDK_TARGET_OS_API_DIR)
+ # Setup OPENJDK_TARGET_OS_API_DIR, used in source paths.
+ if test "x$OPENJDK_TARGET_OS_API" = xposix; then
+ OPENJDK_TARGET_OS_API_DIR="solaris"
+ fi
+ if test "x$OPENJDK_TARGET_OS_API" = xwinapi; then
+ OPENJDK_TARGET_OS_API_DIR="windows"
+ fi
+ AC_SUBST(OPENJDK_TARGET_OS_API_DIR)
- if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
- A_LP64="LP64:="
- # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
- # unpack200.exe
- if test "x$OPENJDK_TARGET_OS" = xlinux || test "x$OPENJDK_TARGET_OS" = xmacosx; then
- ADD_LP64="-D_LP64=1"
- fi
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+ A_LP64="LP64:="
+ # -D_LP64=1 is only set on linux and mac. Setting on windows causes diff in
+ # unpack200.exe
+ if test "x$OPENJDK_TARGET_OS" = xlinux || test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ ADD_LP64="-D_LP64=1"
fi
- AC_SUBST(LP64,$A_LP64)
+ fi
+ AC_SUBST(LP64,$A_LP64)
- if test "x$COMPILE_TYPE" = "xcross"; then
- # FIXME: ... or should this include reduced builds..?
- DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
- else
- DEFINE_CROSS_COMPILE_ARCH=""
- fi
- AC_SUBST(DEFINE_CROSS_COMPILE_ARCH)
+ if test "x$COMPILE_TYPE" = "xcross"; then
+ # FIXME: ... or should this include reduced builds..?
+ DEFINE_CROSS_COMPILE_ARCH="CROSS_COMPILE_ARCH:=$OPENJDK_TARGET_CPU_LEGACY"
+ else
+ DEFINE_CROSS_COMPILE_ARCH=""
+ fi
+ AC_SUBST(DEFINE_CROSS_COMPILE_ARCH)
- # ZERO_ARCHDEF is used to enable architecture-specific code
- case "${OPENJDK_TARGET_CPU}" in
- ppc*) ZERO_ARCHDEF=PPC ;;
- s390*) ZERO_ARCHDEF=S390 ;;
- sparc*) ZERO_ARCHDEF=SPARC ;;
- x86_64*) ZERO_ARCHDEF=AMD64 ;;
- x86) ZERO_ARCHDEF=IA32 ;;
- *) ZERO_ARCHDEF=$(echo "${OPENJDK_TARGET_CPU_LEGACY_LIB}" | tr a-z A-Z)
- esac
- AC_SUBST(ZERO_ARCHDEF)
-
+ # ZERO_ARCHDEF is used to enable architecture-specific code
+ case "${OPENJDK_TARGET_CPU}" in
+ ppc*) ZERO_ARCHDEF=PPC ;;
+ s390*) ZERO_ARCHDEF=S390 ;;
+ sparc*) ZERO_ARCHDEF=SPARC ;;
+ x86_64*) ZERO_ARCHDEF=AMD64 ;;
+ x86) ZERO_ARCHDEF=IA32 ;;
+ *) ZERO_ARCHDEF=$(echo "${OPENJDK_TARGET_CPU_LEGACY_LIB}" | tr a-z A-Z)
+ esac
+ AC_SUBST(ZERO_ARCHDEF)
])
AC_DEFUN([PLATFORM_SET_RELEASE_FILE_OS_VALUES],
[
- if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- REQUIRED_OS_NAME=SunOS
- REQUIRED_OS_VERSION=5.10
- fi
- if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
- REQUIRED_OS_NAME=Linux
- REQUIRED_OS_VERSION=2.6
+ if test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ REQUIRED_OS_NAME=SunOS
+ REQUIRED_OS_VERSION=5.10
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
+ REQUIRED_OS_NAME=Linux
+ REQUIRED_OS_VERSION=2.6
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ REQUIRED_OS_NAME=Windows
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
+ REQUIRED_OS_VERSION=5.2
+ else
+ REQUIRED_OS_VERSION=5.1
fi
- if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- REQUIRED_OS_NAME=Windows
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
- REQUIRED_OS_VERSION=5.2
- else
- REQUIRED_OS_VERSION=5.1
- fi
- fi
- if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- REQUIRED_OS_NAME=Darwin
- REQUIRED_OS_VERSION=11.2
- fi
+ fi
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ REQUIRED_OS_NAME=Darwin
+ REQUIRED_OS_VERSION=11.2
+ fi
- AC_SUBST(REQUIRED_OS_NAME)
- AC_SUBST(REQUIRED_OS_VERSION)
+ AC_SUBST(REQUIRED_OS_NAME)
+ AC_SUBST(REQUIRED_OS_VERSION)
])
#%%% Build and target systems %%%
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_AND_TARGET],
[
-# Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
-# is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
-# product you're building. The target of this build is called "host". Since this is confusing to most people, we
-# have not adopted that system, but use "target" as the platform we are building for. In some places though we need
-# to use the configure naming style.
-AC_CANONICAL_BUILD
-AC_CANONICAL_HOST
-AC_CANONICAL_TARGET
+ # Figure out the build and target systems. # Note that in autoconf terminology, "build" is obvious, but "target"
+ # is confusing; it assumes you are cross-compiling a cross-compiler (!) and "target" is thus the target of the
+ # product you're building. The target of this build is called "host". Since this is confusing to most people, we
+ # have not adopted that system, but use "target" as the platform we are building for. In some places though we need
+ # to use the configure naming style.
+ AC_CANONICAL_BUILD
+ AC_CANONICAL_HOST
+ AC_CANONICAL_TARGET
-PLATFORM_EXTRACT_TARGET_AND_BUILD
-PLATFORM_SETUP_TARGET_CPU_BITS
-PLATFORM_SET_RELEASE_FILE_OS_VALUES
-PLATFORM_SETUP_LEGACY_VARS
+ PLATFORM_EXTRACT_TARGET_AND_BUILD
+ PLATFORM_SETUP_TARGET_CPU_BITS
+ PLATFORM_SET_RELEASE_FILE_OS_VALUES
+ PLATFORM_SETUP_LEGACY_VARS
])
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_BUILD_OS_VERSION],
[
-###############################################################################
+ ###############################################################################
-# Note that this is the build platform OS version!
+ # Note that this is the build platform OS version!
-OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`"
-OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`"
-OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`"
-OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`"
-AC_SUBST(OS_VERSION_MAJOR)
-AC_SUBST(OS_VERSION_MINOR)
-AC_SUBST(OS_VERSION_MICRO)
+ OS_VERSION="`uname -r | ${SED} 's!\.! !g' | ${SED} 's!-! !g'`"
+ OS_VERSION_MAJOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 1 -d ' '`"
+ OS_VERSION_MINOR="`${ECHO} ${OS_VERSION} | ${CUT} -f 2 -d ' '`"
+ OS_VERSION_MICRO="`${ECHO} ${OS_VERSION} | ${CUT} -f 3 -d ' '`"
+ AC_SUBST(OS_VERSION_MAJOR)
+ AC_SUBST(OS_VERSION_MINOR)
+ AC_SUBST(OS_VERSION_MICRO)
])
# Support macro for PLATFORM_SETUP_OPENJDK_TARGET_BITS.
@@ -441,68 +440,68 @@
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_BITS],
[
-###############################################################################
-#
-# Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code.
-# (The JVM can use 32 or 64 bit Java pointers but that decision
-# is made at runtime.)
-#
+ ###############################################################################
+ #
+ # Now we check if libjvm.so will use 32 or 64 bit pointers for the C/C++ code.
+ # (The JVM can use 32 or 64 bit Java pointers but that decision
+ # is made at runtime.)
+ #
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # Always specify -m flags on Solaris
- PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS
-elif test "x$COMPILE_TYPE" = xreduced; then
- if test "x$OPENJDK_TARGET_OS" != xwindows; then
- # Specify -m if running reduced on other Posix platforms
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Always specify -m flags on Solaris
PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS
+ elif test "x$COMPILE_TYPE" = xreduced; then
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ # Specify -m if running reduced on other Posix platforms
+ PLATFORM_SET_COMPILER_TARGET_BITS_FLAGS
+ fi
fi
-fi
-# Make compilation sanity check
-AC_CHECK_HEADERS([stdio.h], , [
- AC_MSG_NOTICE([Failed to compile stdio.h. This likely implies missing compile dependencies.])
- if test "x$COMPILE_TYPE" = xreduced; then
- AC_MSG_NOTICE([You are doing a reduced build. Check that you have 32-bit libraries installed.])
- elif test "x$COMPILE_TYPE" = xcross; then
- AC_MSG_NOTICE([You are doing a cross-compilation. Check that you have all target platform libraries installed.])
+ # Make compilation sanity check
+ AC_CHECK_HEADERS([stdio.h], , [
+ AC_MSG_NOTICE([Failed to compile stdio.h. This likely implies missing compile dependencies.])
+ if test "x$COMPILE_TYPE" = xreduced; then
+ AC_MSG_NOTICE([You are doing a reduced build. Check that you have 32-bit libraries installed.])
+ elif test "x$COMPILE_TYPE" = xcross; then
+ AC_MSG_NOTICE([You are doing a cross-compilation. Check that you have all target platform libraries installed.])
+ fi
+ AC_MSG_ERROR([Cannot continue.])
+ ])
+
+ AC_CHECK_SIZEOF([int *], [1111])
+
+ if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
+ # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
+ SIZEOF_INT_P="$ac_cv_sizeof_int_p"
fi
- AC_MSG_ERROR([Cannot continue.])
-])
-AC_CHECK_SIZEOF([int *], [1111])
-
-if test "x$SIZEOF_INT_P" != "x$ac_cv_sizeof_int_p"; then
- # Workaround autoconf bug, see http://lists.gnu.org/archive/html/autoconf/2010-07/msg00004.html
- SIZEOF_INT_P="$ac_cv_sizeof_int_p"
-fi
-
-if test "x$SIZEOF_INT_P" = x; then
+ if test "x$SIZEOF_INT_P" = x; then
# The test failed, lets stick to the assumed value.
AC_MSG_WARN([The number of bits in the target could not be determined, using $OPENJDK_TARGET_CPU_BITS.])
-else
+ else
TESTED_TARGET_CPU_BITS=`expr 8 \* $SIZEOF_INT_P`
if test "x$TESTED_TARGET_CPU_BITS" != "x$OPENJDK_TARGET_CPU_BITS"; then
- AC_MSG_ERROR([The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)])
+ AC_MSG_ERROR([The tested number of bits in the target ($TESTED_TARGET_CPU_BITS) differs from the number of bits expected to be found in the target ($OPENJDK_TARGET_CPU_BITS)])
fi
-fi
+ fi
-AC_MSG_CHECKING([for target address size])
-AC_MSG_RESULT([$OPENJDK_TARGET_CPU_BITS bits])
+ AC_MSG_CHECKING([for target address size])
+ AC_MSG_RESULT([$OPENJDK_TARGET_CPU_BITS bits])
])
AC_DEFUN_ONCE([PLATFORM_SETUP_OPENJDK_TARGET_ENDIANNESS],
[
-###############################################################################
-#
-# Is the target little of big endian?
-#
-AC_C_BIGENDIAN([ENDIAN="big"],[ENDIAN="little"],[ENDIAN="unknown"],[ENDIAN="universal_endianness"])
+ ###############################################################################
+ #
+ # Is the target little of big endian?
+ #
+ AC_C_BIGENDIAN([ENDIAN="big"],[ENDIAN="little"],[ENDIAN="unknown"],[ENDIAN="universal_endianness"])
-if test "x$ENDIAN" = xuniversal_endianness; then
+ if test "x$ENDIAN" = xuniversal_endianness; then
AC_MSG_ERROR([Building with both big and little endianness is not supported])
-fi
-if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
+ fi
+ if test "x$ENDIAN" != "x$OPENJDK_TARGET_CPU_ENDIAN"; then
AC_MSG_ERROR([The tested endian in the target ($ENDIAN) differs from the endian expected to be found in the target ($OPENJDK_TARGET_CPU_ENDIAN)])
-fi
+ fi
])
--- a/common/autoconf/source-dirs.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/source-dirs.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -25,55 +25,54 @@
AC_DEFUN_ONCE([SRCDIRS_SETUP_TOPDIRS],
[
-
-# Where are the sources. Any of these can be overridden
-# using --with-override-corba and the likes.
-LANGTOOLS_TOPDIR="$SRC_ROOT/langtools"
-CORBA_TOPDIR="$SRC_ROOT/corba"
-JAXP_TOPDIR="$SRC_ROOT/jaxp"
-JAXWS_TOPDIR="$SRC_ROOT/jaxws"
-HOTSPOT_TOPDIR="$SRC_ROOT/hotspot"
-NASHORN_TOPDIR="$SRC_ROOT/nashorn"
-JDK_TOPDIR="$SRC_ROOT/jdk"
-AC_SUBST(LANGTOOLS_TOPDIR)
-AC_SUBST(CORBA_TOPDIR)
-AC_SUBST(JAXP_TOPDIR)
-AC_SUBST(JAXWS_TOPDIR)
-AC_SUBST(HOTSPOT_TOPDIR)
-AC_SUBST(NASHORN_TOPDIR)
-AC_SUBST(JDK_TOPDIR)
+ # Where are the sources. Any of these can be overridden
+ # using --with-override-corba and the likes.
+ LANGTOOLS_TOPDIR="$SRC_ROOT/langtools"
+ CORBA_TOPDIR="$SRC_ROOT/corba"
+ JAXP_TOPDIR="$SRC_ROOT/jaxp"
+ JAXWS_TOPDIR="$SRC_ROOT/jaxws"
+ HOTSPOT_TOPDIR="$SRC_ROOT/hotspot"
+ NASHORN_TOPDIR="$SRC_ROOT/nashorn"
+ JDK_TOPDIR="$SRC_ROOT/jdk"
+ AC_SUBST(LANGTOOLS_TOPDIR)
+ AC_SUBST(CORBA_TOPDIR)
+ AC_SUBST(JAXP_TOPDIR)
+ AC_SUBST(JAXWS_TOPDIR)
+ AC_SUBST(HOTSPOT_TOPDIR)
+ AC_SUBST(NASHORN_TOPDIR)
+ AC_SUBST(JDK_TOPDIR)
])
AC_DEFUN_ONCE([SRCDIRS_SETUP_ALTERNATIVE_TOPDIRS],
[
-###############################################################################
-#
-# Pickup additional source for a component from outside of the source root
-# or override source for a component.
-#
-AC_ARG_WITH(add-source-root, [AS_HELP_STRING([--with-add-source-root],
- [for each and every source directory, look in this additional source root for
- the same directory; if it exists and have files in it, include it in the build])])
-
-AC_ARG_WITH(override-source-root, [AS_HELP_STRING([--with-override-source-root],
- [for each and every source directory, look in this override source root for
- the same directory; if it exists, use that directory instead and
- ignore the directory in the original source root])])
+ ###############################################################################
+ #
+ # Pickup additional source for a component from outside of the source root
+ # or override source for a component.
+ #
+ AC_ARG_WITH(add-source-root, [AS_HELP_STRING([--with-add-source-root],
+ [for each and every source directory, look in this additional source root for
+ the same directory; if it exists and have files in it, include it in the build])])
-AC_ARG_WITH(adds-and-overrides, [AS_HELP_STRING([--with-adds-and-overrides],
- [use the subdirs 'adds' and 'overrides' in the specified directory as
- add-source-root and override-source-root])])
+ AC_ARG_WITH(override-source-root, [AS_HELP_STRING([--with-override-source-root],
+ [for each and every source directory, look in this override source root for
+ the same directory; if it exists, use that directory instead and
+ ignore the directory in the original source root])])
-if test "x$with_adds_and_overrides" != x; then
+ AC_ARG_WITH(adds-and-overrides, [AS_HELP_STRING([--with-adds-and-overrides],
+ [use the subdirs 'adds' and 'overrides' in the specified directory as
+ add-source-root and override-source-root])])
+
+ if test "x$with_adds_and_overrides" != x; then
with_add_source_root="$with_adds_and_overrides/adds"
with_override_source_root="$with_adds_and_overrides/overrides"
-fi
+ fi
-if test "x$with_add_source_root" != x; then
+ if test "x$with_add_source_root" != x; then
if ! test -d $with_add_source_root; then
- AC_MSG_ERROR([Trying to use a non-existant add-source-root $with_add_source_root])
+ AC_MSG_ERROR([Trying to use a non-existant add-source-root $with_add_source_root])
fi
CURDIR="$PWD"
cd "$with_add_source_root"
@@ -82,219 +81,218 @@
# Verify that the addon source root does not have any root makefiles.
# If it does, then it is usually an error, prevent this.
if test -f $with_add_source_root/langtools/makefiles/Makefile || \
- test -f $with_add_source_root/langtools/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/langtools/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full langtools repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/corba/makefiles/Makefile || \
- test -f $with_add_source_root/corba/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full corba repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/corba/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full corba repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/jaxp/makefiles/Makefile || \
- test -f $with_add_source_root/jaxp/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/jaxp/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full jaxp repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/jaxws/makefiles/Makefile || \
- test -f $with_add_source_root/jaxws/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/jaxws/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full jaxws repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/hotspot/makefiles/Makefile || \
- test -f $with_add_source_root/hotspot/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/hotspot/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full hotspot repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/nashorn/makefiles/Makefile || \
- test -f $with_add_source_root/nashorn/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full nashorn repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/nashorn/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full nashorn repo! An add source root should only contain additional sources.])
fi
if test -f $with_add_source_root/jdk/makefiles/Makefile || \
- test -f $with_add_source_root/jdk/make/Makefile; then
- AC_MSG_ERROR([Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources.])
+ test -f $with_add_source_root/jdk/make/Makefile; then
+ AC_MSG_ERROR([Your add source root seems to contain a full JDK repo! An add source root should only contain additional sources.])
fi
-fi
-AC_SUBST(ADD_SRC_ROOT)
+ fi
+ AC_SUBST(ADD_SRC_ROOT)
-if test "x$with_override_source_root" != x; then
+ if test "x$with_override_source_root" != x; then
if ! test -d $with_override_source_root; then
- AC_MSG_ERROR([Trying to use a non-existant override-source-root $with_override_source_root])
+ AC_MSG_ERROR([Trying to use a non-existant override-source-root $with_override_source_root])
fi
CURDIR="$PWD"
cd "$with_override_source_root"
OVERRIDE_SRC_ROOT="`pwd`"
cd "$CURDIR"
if test -f $with_override_source_root/langtools/makefiles/Makefile || \
- test -f $with_override_source_root/langtools/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/langtools/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full langtools repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/corba/makefiles/Makefile || \
- test -f $with_override_source_root/corba/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full corba repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/corba/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full corba repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/jaxp/makefiles/Makefile || \
- test -f $with_override_source_root/jaxp/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/jaxp/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full jaxp repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/jaxws/makefiles/Makefile || \
- test -f $with_override_source_root/jaxws/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/jaxws/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full jaxws repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/hotspot/makefiles/Makefile || \
- test -f $with_override_source_root/hotspot/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/hotspot/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full hotspot repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/nashorn/makefiles/Makefile || \
- test -f $with_override_source_root/nashorn/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full nashorn repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/nashorn/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full nashorn repo! An override source root should only contain sources that override.])
fi
if test -f $with_override_source_root/jdk/makefiles/Makefile || \
- test -f $with_override_source_root/jdk/make/Makefile; then
- AC_MSG_ERROR([Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override.])
+ test -f $with_override_source_root/jdk/make/Makefile; then
+ AC_MSG_ERROR([Your override source root seems to contain a full JDK repo! An override source root should only contain sources that override.])
fi
-fi
-AC_SUBST(OVERRIDE_SRC_ROOT)
+ fi
+ AC_SUBST(OVERRIDE_SRC_ROOT)
-###############################################################################
-#
-# Override a repo completely, this is used for example when you have 3 small
-# development sandboxes of the langtools sources and want to avoid having 3 full
-# OpenJDK sources checked out on disk.
-#
-# Assuming that the 3 langtools sandboxes are located here:
-# /home/fredrik/sandbox1/langtools
-# /home/fredrik/sandbox2/langtools
-# /home/fredrik/sandbox3/langtools
-#
-# From the source root you create build subdirs manually:
-# mkdir -p build1 build2 build3
-# in each build directory run:
-# (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make)
-# (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make)
-# (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make)
-#
+ ###############################################################################
+ #
+ # Override a repo completely, this is used for example when you have 3 small
+ # development sandboxes of the langtools sources and want to avoid having 3 full
+ # OpenJDK sources checked out on disk.
+ #
+ # Assuming that the 3 langtools sandboxes are located here:
+ # /home/fredrik/sandbox1/langtools
+ # /home/fredrik/sandbox2/langtools
+ # /home/fredrik/sandbox3/langtools
+ #
+ # From the source root you create build subdirs manually:
+ # mkdir -p build1 build2 build3
+ # in each build directory run:
+ # (cd build1 && ../configure --with-override-langtools=/home/fredrik/sandbox1 && make)
+ # (cd build2 && ../configure --with-override-langtools=/home/fredrik/sandbox2 && make)
+ # (cd build3 && ../configure --with-override-langtools=/home/fredrik/sandbox3 && make)
+ #
-AC_ARG_WITH(override-langtools, [AS_HELP_STRING([--with-override-langtools],
- [use this langtools dir for the build])])
+ AC_ARG_WITH(override-langtools, [AS_HELP_STRING([--with-override-langtools],
+ [use this langtools dir for the build])])
-AC_ARG_WITH(override-corba, [AS_HELP_STRING([--with-override-corba],
- [use this corba dir for the build])])
+ AC_ARG_WITH(override-corba, [AS_HELP_STRING([--with-override-corba],
+ [use this corba dir for the build])])
-AC_ARG_WITH(override-jaxp, [AS_HELP_STRING([--with-override-jaxp],
- [use this jaxp dir for the build])])
+ AC_ARG_WITH(override-jaxp, [AS_HELP_STRING([--with-override-jaxp],
+ [use this jaxp dir for the build])])
-AC_ARG_WITH(override-jaxws, [AS_HELP_STRING([--with-override-jaxws],
- [use this jaxws dir for the build])])
+ AC_ARG_WITH(override-jaxws, [AS_HELP_STRING([--with-override-jaxws],
+ [use this jaxws dir for the build])])
-AC_ARG_WITH(override-hotspot, [AS_HELP_STRING([--with-override-hotspot],
- [use this hotspot dir for the build])])
+ AC_ARG_WITH(override-hotspot, [AS_HELP_STRING([--with-override-hotspot],
+ [use this hotspot dir for the build])])
-AC_ARG_WITH(override-nashorn, [AS_HELP_STRING([--with-override-nashorn],
- [use this nashorn dir for the build])])
+ AC_ARG_WITH(override-nashorn, [AS_HELP_STRING([--with-override-nashorn],
+ [use this nashorn dir for the build])])
-AC_ARG_WITH(override-jdk, [AS_HELP_STRING([--with-override-jdk],
- [use this jdk dir for the build])])
+ AC_ARG_WITH(override-jdk, [AS_HELP_STRING([--with-override-jdk],
+ [use this jdk dir for the build])])
-if test "x$with_override_langtools" != x; then
+ if test "x$with_override_langtools" != x; then
CURDIR="$PWD"
cd "$with_override_langtools"
LANGTOOLS_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $LANGTOOLS_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override langtools with a full langtools repo!])
+ AC_MSG_ERROR([You have to override langtools with a full langtools repo!])
fi
AC_MSG_CHECKING([if langtools should be overridden])
AC_MSG_RESULT([yes with $LANGTOOLS_TOPDIR])
-fi
-if test "x$with_override_corba" != x; then
+ fi
+ if test "x$with_override_corba" != x; then
CURDIR="$PWD"
cd "$with_override_corba"
CORBA_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $CORBA_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override corba with a full corba repo!])
+ AC_MSG_ERROR([You have to override corba with a full corba repo!])
fi
AC_MSG_CHECKING([if corba should be overridden])
AC_MSG_RESULT([yes with $CORBA_TOPDIR])
-fi
-if test "x$with_override_jaxp" != x; then
+ fi
+ if test "x$with_override_jaxp" != x; then
CURDIR="$PWD"
cd "$with_override_jaxp"
JAXP_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JAXP_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override jaxp with a full jaxp repo!])
+ AC_MSG_ERROR([You have to override jaxp with a full jaxp repo!])
fi
AC_MSG_CHECKING([if jaxp should be overridden])
AC_MSG_RESULT([yes with $JAXP_TOPDIR])
-fi
-if test "x$with_override_jaxws" != x; then
+ fi
+ if test "x$with_override_jaxws" != x; then
CURDIR="$PWD"
cd "$with_override_jaxws"
JAXWS_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JAXWS_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override jaxws with a full jaxws repo!])
+ AC_MSG_ERROR([You have to override jaxws with a full jaxws repo!])
fi
AC_MSG_CHECKING([if jaxws should be overridden])
AC_MSG_RESULT([yes with $JAXWS_TOPDIR])
-fi
-if test "x$with_override_hotspot" != x; then
+ fi
+ if test "x$with_override_hotspot" != x; then
CURDIR="$PWD"
cd "$with_override_hotspot"
HOTSPOT_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $HOTSPOT_TOPDIR/make/Makefile && \
- ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override hotspot with a full hotspot repo!])
+ ! test -f $HOTSPOT_TOPDIR/makefiles/Makefile; then
+ AC_MSG_ERROR([You have to override hotspot with a full hotspot repo!])
fi
AC_MSG_CHECKING([if hotspot should be overridden])
AC_MSG_RESULT([yes with $HOTSPOT_TOPDIR])
-fi
-if test "x$with_override_nashorn" != x; then
+ fi
+ if test "x$with_override_nashorn" != x; then
CURDIR="$PWD"
cd "$with_override_nashorn"
NASHORN_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $NASHORN_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override nashorn with a full nashorn repo!])
+ AC_MSG_ERROR([You have to override nashorn with a full nashorn repo!])
fi
AC_MSG_CHECKING([if nashorn should be overridden])
AC_MSG_RESULT([yes with $NASHORN_TOPDIR])
-fi
-if test "x$with_override_jdk" != x; then
+ fi
+ if test "x$with_override_jdk" != x; then
CURDIR="$PWD"
cd "$with_override_jdk"
JDK_TOPDIR="`pwd`"
cd "$CURDIR"
if ! test -f $JDK_TOPDIR/makefiles/Makefile; then
- AC_MSG_ERROR([You have to override JDK with a full JDK repo!])
+ AC_MSG_ERROR([You have to override JDK with a full JDK repo!])
fi
AC_MSG_CHECKING([if JDK should be overridden])
AC_MSG_RESULT([yes with $JDK_TOPDIR])
-fi
-
+ fi
])
AC_DEFUN_ONCE([SRCDIRS_SETUP_OUTPUT_DIRS],
[
-BUILD_OUTPUT="$OUTPUT_ROOT"
-AC_SUBST(BUILD_OUTPUT)
+ BUILD_OUTPUT="$OUTPUT_ROOT"
+ AC_SUBST(BUILD_OUTPUT)
-HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
-BUILD_HOTSPOT=true
-AC_SUBST(HOTSPOT_DIST)
-AC_SUBST(BUILD_HOTSPOT)
-AC_ARG_WITH(import-hotspot, [AS_HELP_STRING([--with-import-hotspot],
- [import hotspot binaries from this jdk image or hotspot build dist dir instead of building from source])])
-if test "x$with_import_hotspot" != x; then
+ HOTSPOT_DIST="$OUTPUT_ROOT/hotspot/dist"
+ BUILD_HOTSPOT=true
+ AC_SUBST(HOTSPOT_DIST)
+ AC_SUBST(BUILD_HOTSPOT)
+ AC_ARG_WITH(import-hotspot, [AS_HELP_STRING([--with-import-hotspot],
+ [import hotspot binaries from this jdk image or hotspot build dist dir instead of building from source])])
+ if test "x$with_import_hotspot" != x; then
CURDIR="$PWD"
cd "$with_import_hotspot"
HOTSPOT_DIST="`pwd`"
cd "$CURDIR"
if ! (test -d $HOTSPOT_DIST/lib && test -d $HOTSPOT_DIST/jre/lib); then
- AC_MSG_ERROR([You have to import hotspot from a full jdk image or hotspot build dist dir!])
+ AC_MSG_ERROR([You have to import hotspot from a full jdk image or hotspot build dist dir!])
fi
AC_MSG_CHECKING([if hotspot should be imported])
AC_MSG_RESULT([yes from $HOTSPOT_DIST])
BUILD_HOTSPOT=false
-fi
+ fi
-JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
+ JDK_OUTPUTDIR="$OUTPUT_ROOT/jdk"
])
--- a/common/autoconf/spec.gmk.in Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/spec.gmk.in Thu Oct 10 14:58:19 2013 +0200
@@ -30,8 +30,8 @@
# (called @OPENJDK_BUILD_AUTOCONF_NAME@ by autoconf)
# using 'configure @CONFIGURE_COMMAND_LINE@'
-# When calling macros, the spaces between arguments are
-# often semantically important! Sometimes we need to subst
+# When calling macros, the spaces between arguments are
+# often semantically important! Sometimes we need to subst
# spaces and commas, therefore we need the following macros.
X:=
SPACE:=$(X) $(X)
@@ -56,17 +56,17 @@
# Pass along the verbosity and log level settings.
ifeq (,$(findstring VERBOSE=,$(MAKE)))
- MAKE:=$(MAKE) $(VERBOSE) VERBOSE="$(VERBOSE)" LOG_LEVEL="$(LOG_LEVEL)"
+ MAKE:=$(MAKE) $(VERBOSE) VERBOSE="$(VERBOSE)" LOG_LEVEL="$(LOG_LEVEL)"
endif
# No implicit variables or rules!
ifeq (,$(findstring -R,$(MAKE)))
- MAKE:=$(MAKE) -R
+ MAKE:=$(MAKE) -R
endif
# Specify where the common include directory for makefiles is.
ifeq (,$(findstring -I @SRC_ROOT@/common/makefiles,$(MAKE)))
- MAKE:=$(MAKE) -I @SRC_ROOT@/common/makefiles
+ MAKE:=$(MAKE) -I @SRC_ROOT@/common/makefiles
endif
# The "human readable" name of this configuration
@@ -175,7 +175,7 @@
RELEASE=$(JDK_VERSION)-$(MILESTONE)$(BUILD_VARIANT_RELEASE)
endif
-ifneq ($(USER_RELEASE_SUFFIX),)
+ifneq ($(USER_RELEASE_SUFFIX), )
FULL_VERSION=$(RELEASE)-$(USER_RELEASE_SUFFIX)-$(JDK_BUILD_NUMBER)
else
FULL_VERSION=$(RELEASE)-$(JDK_BUILD_NUMBER)
@@ -287,7 +287,7 @@
# Enable unlimited crypto policy
UNLIMITED_CRYPTO=@UNLIMITED_CRYPTO@
-# Necessary additional compiler flags to compile X11
+# Necessary additional compiler flags to compile X11
X_CFLAGS:=@X_CFLAGS@
X_LIBS:=@X_LIBS@
OPENWIN_HOME:=@OPENWIN_HOME@
@@ -388,7 +388,7 @@
# Command to create a shared library
SHARED_LIBRARY_FLAGS:=@SHARED_LIBRARY_FLAGS@
-# Options to linker to specify a mapfile.
+# Options to linker to specify a mapfile.
# (Note absence of := assignment, because we do not want to evaluate the macro body here)
SET_SHARED_LIBRARY_MAPFILE=@SET_SHARED_LIBRARY_MAPFILE@
@@ -461,7 +461,7 @@
# Guarding this against resetting value. Legacy make files include spec multiple
# times.
ifndef RC_FLAGS
-RC_FLAGS:=@RC_FLAGS@
+ RC_FLAGS:=@RC_FLAGS@
endif
# A specific java binary with specific options can be used to run
@@ -541,9 +541,9 @@
# we have solved how to prevent the log wrapper to wait
# for the background sjavac server process.
ifeq (@ENABLE_SJAVAC@X@OPENJDK_BUILD_OS_API@,yesXwinapi)
- BUILD_LOG_WRAPPER:=
+ BUILD_LOG_WRAPPER:=
else
- BUILD_LOG_WRAPPER:=@BUILD_LOG_WRAPPER@
+ BUILD_LOG_WRAPPER:=@BUILD_LOG_WRAPPER@
endif
# Build setup
@@ -563,12 +563,12 @@
# of the next macro to get rid of superfluous files.
ADD_SRCS=$1
ifneq (,$(ADD_SRC_ROOT))
- # Append wildcard rule to pickup any matching source roots found below ADD_SRC_ROOT
- ADD_SRCS+=$(wildcard $(subst $(SRC_ROOT),$(ADD_SRC_ROOT),$1))
+ # Append wildcard rule to pickup any matching source roots found below ADD_SRC_ROOT
+ ADD_SRCS+=$(wildcard $(subst $(SRC_ROOT),$(ADD_SRC_ROOT),$1))
endif
ifneq (,$(OVERRIDE_SRC_ROOT))
- # Append wildcard rule to pickup any matching source roots found below OVERRIDE_SRC_ROOT
- ADD_SRCS+=$(wildcard $(subst $(SRC_ROOT),$(OVERRIDE_SRC_ROOT),$1))
+ # Append wildcard rule to pickup any matching source roots found below OVERRIDE_SRC_ROOT
+ ADD_SRCS+=$(wildcard $(subst $(SRC_ROOT),$(OVERRIDE_SRC_ROOT),$1))
endif
# OVR_SRCS creates a filter expression to filter out sources in
@@ -578,9 +578,9 @@
# We cannot do the scan in configure, since that would force us to rerun configure when
# we add overridden sources.
ifneq (,$(OVERRIDE_SRC_ROOT))
- OVR_SRCS:=$(addsuffix %,$(subst $(OVERRIDE_SRC_ROOT),$(SRC_ROOT),$(sort $(dir $(shell $(FIND) $(OVERRIDE_SRC_ROOT) -type f)))))
+ OVR_SRCS:=$(addsuffix %,$(subst $(OVERRIDE_SRC_ROOT),$(SRC_ROOT),$(sort $(dir $(shell $(FIND) $(OVERRIDE_SRC_ROOT) -type f)))))
else
- OVR_SRCS:=
+ OVR_SRCS:=
endif
####################################################
@@ -589,7 +589,7 @@
#
# Common prefix for all installed files. Defaults to /usr/local,
-# but /opt/myjdk is another common version.
+# but /opt/myjdk is another common version.
INSTALL_PREFIX=@prefix@
# Directories containing architecture-dependent files should be relative to exec_prefix
@@ -619,7 +619,7 @@
# Executables that other programs run.
INSTALL_LIBEXECDIR=@libexecdir@
-# Locale-dependent but architecture-independent data, such as message catalogs.
+# Locale-dependent but architecture-independent data, such as message catalogs.
INSTALL_LOCALEDIR=@localedir@
# Modifiable single-machine data
--- a/common/autoconf/toolchain.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/toolchain.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -86,25 +86,25 @@
AC_DEFUN_ONCE([TOOLCHAIN_SETUP_SYSROOT_AND_OUT_OPTIONS],
[
-###############################################################################
-#
-# Configure the development tool paths and potential sysroot.
-#
-AC_LANG(C++)
+ ###############################################################################
+ #
+ # Configure the development tool paths and potential sysroot.
+ #
+ AC_LANG(C++)
-# The option used to specify the target .o,.a or .so file.
-# When compiling, how to specify the to be created object file.
-CC_OUT_OPTION='-o$(SPACE)'
-# When linking, how to specify the to be created executable.
-EXE_OUT_OPTION='-o$(SPACE)'
-# When linking, how to specify the to be created dynamically linkable library.
-LD_OUT_OPTION='-o$(SPACE)'
-# When archiving, how to specify the to be create static archive for object files.
-AR_OUT_OPTION='rcs$(SPACE)'
-AC_SUBST(CC_OUT_OPTION)
-AC_SUBST(EXE_OUT_OPTION)
-AC_SUBST(LD_OUT_OPTION)
-AC_SUBST(AR_OUT_OPTION)
+ # The option used to specify the target .o,.a or .so file.
+ # When compiling, how to specify the to be created object file.
+ CC_OUT_OPTION='-o$(SPACE)'
+ # When linking, how to specify the to be created executable.
+ EXE_OUT_OPTION='-o$(SPACE)'
+ # When linking, how to specify the to be created dynamically linkable library.
+ LD_OUT_OPTION='-o$(SPACE)'
+ # When archiving, how to specify the to be create static archive for object files.
+ AR_OUT_OPTION='rcs$(SPACE)'
+ AC_SUBST(CC_OUT_OPTION)
+ AC_SUBST(EXE_OUT_OPTION)
+ AC_SUBST(LD_OUT_OPTION)
+ AC_SUBST(AR_OUT_OPTION)
])
# $1 = compiler to test (CC or CXX)
@@ -133,8 +133,8 @@
fi
if test "x[$]$1" = x; then
- HELP_MSG_MISSING_DEPENDENCY([devkit])
- AC_MSG_ERROR([Could not find a $COMPILER_NAME compiler. $HELP_MSG])
+ HELP_MSG_MISSING_DEPENDENCY([devkit])
+ AC_MSG_ERROR([Could not find a $COMPILER_NAME compiler. $HELP_MSG])
fi
BASIC_FIXUP_EXECUTABLE($1)
AC_MSG_CHECKING([resolved symbolic links for $1])
@@ -174,26 +174,26 @@
AC_DEFUN([TOOLCHAIN_SETUP_PATHS],
[
-if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV
- BASIC_DEPRECATED_ARG_WITH([dxsdk])
- BASIC_DEPRECATED_ARG_WITH([dxsdk-lib])
- BASIC_DEPRECATED_ARG_WITH([dxsdk-include])
-fi
+ if test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV
+ BASIC_DEPRECATED_ARG_WITH([dxsdk])
+ BASIC_DEPRECATED_ARG_WITH([dxsdk-lib])
+ BASIC_DEPRECATED_ARG_WITH([dxsdk-include])
+ fi
-AC_SUBST(MSVCR_DLL)
+ AC_SUBST(MSVCR_DLL)
-# If --build AND --host is set, then the configure script will find any
-# cross compilation tools in the PATH. Cross compilation tools
-# follows the cross compilation standard where they are prefixed with ${host}.
-# For example the binary i686-sun-solaris2.10-gcc
-# will cross compile for i686-sun-solaris2.10
-# If neither of build and host is not set, then build=host and the
-# default compiler found in the path will be used.
-# Setting only --host, does not seem to be really supported.
-# Please set both --build and --host if you want to cross compile.
+ # If --build AND --host is set, then the configure script will find any
+ # cross compilation tools in the PATH. Cross compilation tools
+ # follows the cross compilation standard where they are prefixed with ${host}.
+ # For example the binary i686-sun-solaris2.10-gcc
+ # will cross compile for i686-sun-solaris2.10
+ # If neither of build and host is not set, then build=host and the
+ # default compiler found in the path will be used.
+ # Setting only --host, does not seem to be really supported.
+ # Please set both --build and --host if you want to cross compile.
-if test "x$COMPILE_TYPE" = "xcross"; then
+ if test "x$COMPILE_TYPE" = "xcross"; then
# Now we to find a C/C++ compiler that can build executables for the build
# platform. We can't use the AC_PROG_CC macro, since it can only be used
# once. Also, we need to do this before adding a tools dir to the path,
@@ -206,123 +206,124 @@
BASIC_FIXUP_EXECUTABLE(BUILD_CXX)
AC_PATH_PROG(BUILD_LD, ld)
BASIC_FIXUP_EXECUTABLE(BUILD_LD)
-fi
-AC_SUBST(BUILD_CC)
-AC_SUBST(BUILD_CXX)
-AC_SUBST(BUILD_LD)
+ fi
+ AC_SUBST(BUILD_CC)
+ AC_SUBST(BUILD_CXX)
+ AC_SUBST(BUILD_LD)
-# If a devkit is found on the builddeps server, then prepend its path to the
-# PATH variable. If there are cross compilers available in the devkit, these
-# will be found by AC_PROG_CC et al.
-DEVKIT=
-BDEPS_CHECK_MODULE(DEVKIT, devkit, xxx,
- [# Found devkit
- PATH="$DEVKIT/bin:$PATH"
- SYS_ROOT="$DEVKIT/${rewritten_target}/sys-root"
- if test "x$x_includes" = "xNONE"; then
- x_includes="$SYS_ROOT/usr/include/X11"
- fi
- if test "x$x_libraries" = "xNONE"; then
- x_libraries="$SYS_ROOT/usr/lib"
- fi
- ],
- [])
+ # If a devkit is found on the builddeps server, then prepend its path to the
+ # PATH variable. If there are cross compilers available in the devkit, these
+ # will be found by AC_PROG_CC et al.
+ DEVKIT=
+ BDEPS_CHECK_MODULE(DEVKIT, devkit, xxx,
+ [
+ # Found devkit
+ PATH="$DEVKIT/bin:$PATH"
+ SYS_ROOT="$DEVKIT/${rewritten_target}/sys-root"
+ if test "x$x_includes" = "xNONE"; then
+ x_includes="$SYS_ROOT/usr/include/X11"
+ fi
+ if test "x$x_libraries" = "xNONE"; then
+ x_libraries="$SYS_ROOT/usr/lib"
+ fi
+ ],
+ [])
-# Store the CFLAGS etal passed to the configure script.
-ORG_CFLAGS="$CFLAGS"
-ORG_CXXFLAGS="$CXXFLAGS"
-ORG_OBJCFLAGS="$OBJCFLAGS"
+ # Store the CFLAGS etal passed to the configure script.
+ ORG_CFLAGS="$CFLAGS"
+ ORG_CXXFLAGS="$CXXFLAGS"
+ ORG_OBJCFLAGS="$OBJCFLAGS"
-# autoconf magic only relies on PATH, so update it if tools dir is specified
-OLD_PATH="$PATH"
-if test "x$TOOLS_DIR" != x; then
- PATH=$TOOLS_DIR:$PATH
-fi
+ # autoconf magic only relies on PATH, so update it if tools dir is specified
+ OLD_PATH="$PATH"
+ if test "x$TOOLS_DIR" != x; then
+ PATH=$TOOLS_DIR:$PATH
+ fi
-### Locate C compiler (CC)
+ ### Locate C compiler (CC)
-# On windows, only cl.exe is supported.
-# On Solaris, cc is preferred to gcc.
-# Elsewhere, gcc is preferred to cc.
+ # On windows, only cl.exe is supported.
+ # On Solaris, cc is preferred to gcc.
+ # Elsewhere, gcc is preferred to cc.
-if test "x$CC" != x; then
- COMPILER_CHECK_LIST="$CC"
-elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- COMPILER_CHECK_LIST="cl"
-elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- COMPILER_CHECK_LIST="cc gcc"
-else
- COMPILER_CHECK_LIST="gcc cc"
-fi
+ if test "x$CC" != x; then
+ COMPILER_CHECK_LIST="$CC"
+ elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ COMPILER_CHECK_LIST="cl"
+ elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ COMPILER_CHECK_LIST="cc gcc"
+ else
+ COMPILER_CHECK_LIST="gcc cc"
+ fi
-TOOLCHAIN_FIND_COMPILER([CC],[C],[$COMPILER_CHECK_LIST])
-# Now that we have resolved CC ourself, let autoconf have its go at it
-AC_PROG_CC([$CC])
+ TOOLCHAIN_FIND_COMPILER([CC],[C],[$COMPILER_CHECK_LIST])
+ # Now that we have resolved CC ourself, let autoconf have its go at it
+ AC_PROG_CC([$CC])
-### Locate C++ compiler (CXX)
+ ### Locate C++ compiler (CXX)
-if test "x$CXX" != x; then
- COMPILER_CHECK_LIST="$CXX"
-elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
- COMPILER_CHECK_LIST="cl"
-elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
- COMPILER_CHECK_LIST="CC g++"
-else
- COMPILER_CHECK_LIST="g++ CC"
-fi
+ if test "x$CXX" != x; then
+ COMPILER_CHECK_LIST="$CXX"
+ elif test "x$OPENJDK_TARGET_OS" = "xwindows"; then
+ COMPILER_CHECK_LIST="cl"
+ elif test "x$OPENJDK_TARGET_OS" = "xsolaris"; then
+ COMPILER_CHECK_LIST="CC g++"
+ else
+ COMPILER_CHECK_LIST="g++ CC"
+ fi
-TOOLCHAIN_FIND_COMPILER([CXX],[C++],[$COMPILER_CHECK_LIST])
-# Now that we have resolved CXX ourself, let autoconf have its go at it
-AC_PROG_CXX([$CXX])
+ TOOLCHAIN_FIND_COMPILER([CXX],[C++],[$COMPILER_CHECK_LIST])
+ # Now that we have resolved CXX ourself, let autoconf have its go at it
+ AC_PROG_CXX([$CXX])
-### Locate other tools
+ ### Locate other tools
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
AC_PROG_OBJC
BASIC_FIXUP_EXECUTABLE(OBJC)
-else
+ else
OBJC=
-fi
+ fi
-# Restore the flags to the user specified values.
-# This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
-CFLAGS="$ORG_CFLAGS"
-CXXFLAGS="$ORG_CXXFLAGS"
-OBJCFLAGS="$ORG_OBJCFLAGS"
+ # Restore the flags to the user specified values.
+ # This is necessary since AC_PROG_CC defaults CFLAGS to "-g -O2"
+ CFLAGS="$ORG_CFLAGS"
+ CXXFLAGS="$ORG_CXXFLAGS"
+ OBJCFLAGS="$ORG_OBJCFLAGS"
-LD="$CC"
-LDEXE="$CC"
-LDCXX="$CXX"
-LDEXECXX="$CXX"
-AC_SUBST(LD)
-# LDEXE is the linker to use, when creating executables.
-AC_SUBST(LDEXE)
-# Linking C++ libraries.
-AC_SUBST(LDCXX)
-# Linking C++ executables.
-AC_SUBST(LDEXECXX)
+ LD="$CC"
+ LDEXE="$CC"
+ LDCXX="$CXX"
+ LDEXECXX="$CXX"
+ AC_SUBST(LD)
+ # LDEXE is the linker to use, when creating executables.
+ AC_SUBST(LDEXE)
+ # Linking C++ libraries.
+ AC_SUBST(LDCXX)
+ # Linking C++ executables.
+ AC_SUBST(LDEXECXX)
-if test "x$OPENJDK_TARGET_OS" != xwindows; then
+ if test "x$OPENJDK_TARGET_OS" != xwindows; then
AC_CHECK_TOOL(AR, ar)
BASIC_FIXUP_EXECUTABLE(AR)
-fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
ARFLAGS="-r"
-else
+ else
ARFLAGS=""
-fi
-AC_SUBST(ARFLAGS)
+ fi
+ AC_SUBST(ARFLAGS)
-# For hotspot, we need these in Windows mixed path; other platforms keep them the same
-HOTSPOT_CXX="$CXX"
-HOTSPOT_LD="$LD"
-AC_SUBST(HOTSPOT_CXX)
-AC_SUBST(HOTSPOT_LD)
+ # For hotspot, we need these in Windows mixed path; other platforms keep them the same
+ HOTSPOT_CXX="$CXX"
+ HOTSPOT_LD="$LD"
+ AC_SUBST(HOTSPOT_CXX)
+ AC_SUBST(HOTSPOT_LD)
-COMPILER_NAME=gcc
-COMPILER_TYPE=CC
-AS_IF([test "x$OPENJDK_TARGET_OS" = xwindows], [
+ COMPILER_NAME=gcc
+ COMPILER_TYPE=CC
+ AS_IF([test "x$OPENJDK_TARGET_OS" = xwindows], [
# For now, assume that we are always compiling using cl.exe.
CC_OUT_OPTION=-Fo
EXE_OUT_OPTION=-out:
@@ -369,45 +370,45 @@
RC_FLAGS="-nologo -l 0x409 -r"
AS_IF([test "x$VARIANT" = xOPT], [
- RC_FLAGS="$RC_FLAGS -d NDEBUG"
- ])
+ RC_FLAGS="$RC_FLAGS -d NDEBUG"
+ ])
- # The version variables used to create RC_FLAGS may be overridden
- # in a custom configure script, or possibly the command line.
- # Let those variables be expanded at make time in spec.gmk.
- # The \$ are escaped to the shell, and the $(...) variables
- # are evaluated by make.
- RC_FLAGS="$RC_FLAGS \
- -d \"JDK_BUILD_ID=\$(FULL_VERSION)\" \
- -d \"JDK_COMPANY=\$(COMPANY_NAME)\" \
- -d \"JDK_COMPONENT=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) binary\" \
- -d \"JDK_VER=\$(JDK_MINOR_VERSION).\$(JDK_MICRO_VERSION).\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0).\$(COOKED_BUILD_NUMBER)\" \
- -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\" \
- -d \"JDK_NAME=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) \$(JDK_MINOR_VERSION) \$(JDK_UPDATE_META_TAG)\" \
- -d \"JDK_FVER=\$(JDK_MINOR_VERSION),\$(JDK_MICRO_VERSION),\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0),\$(COOKED_BUILD_NUMBER)\""
+ # The version variables used to create RC_FLAGS may be overridden
+ # in a custom configure script, or possibly the command line.
+ # Let those variables be expanded at make time in spec.gmk.
+ # The \$ are escaped to the shell, and the $(...) variables
+ # are evaluated by make.
+ RC_FLAGS="$RC_FLAGS \
+ -d \"JDK_BUILD_ID=\$(FULL_VERSION)\" \
+ -d \"JDK_COMPANY=\$(COMPANY_NAME)\" \
+ -d \"JDK_COMPONENT=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) binary\" \
+ -d \"JDK_VER=\$(JDK_MINOR_VERSION).\$(JDK_MICRO_VERSION).\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0).\$(COOKED_BUILD_NUMBER)\" \
+ -d \"JDK_COPYRIGHT=Copyright \xA9 $COPYRIGHT_YEAR\" \
+ -d \"JDK_NAME=\$(PRODUCT_NAME) \$(JDK_RC_PLATFORM_NAME) \$(JDK_MINOR_VERSION) \$(JDK_UPDATE_META_TAG)\" \
+ -d \"JDK_FVER=\$(JDK_MINOR_VERSION),\$(JDK_MICRO_VERSION),\$(if \$(JDK_UPDATE_VERSION),\$(JDK_UPDATE_VERSION),0),\$(COOKED_BUILD_NUMBER)\""
- # lib.exe is used to create static libraries.
- AC_CHECK_PROG([WINAR], [lib],[lib],,,)
- BASIC_FIXUP_EXECUTABLE(WINAR)
- AR="$WINAR"
- ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
+ # lib.exe is used to create static libraries.
+ AC_CHECK_PROG([WINAR], [lib],[lib],,,)
+ BASIC_FIXUP_EXECUTABLE(WINAR)
+ AR="$WINAR"
+ ARFLAGS="-nologo -NODEFAULTLIB:MSVCRT"
- AC_CHECK_PROG([DUMPBIN], [dumpbin], [dumpbin],,,)
- BASIC_FIXUP_EXECUTABLE(DUMPBIN)
+ AC_CHECK_PROG([DUMPBIN], [dumpbin], [dumpbin],,,)
+ BASIC_FIXUP_EXECUTABLE(DUMPBIN)
- COMPILER_TYPE=CL
- CCXXFLAGS="$CCXXFLAGS -nologo"
-])
-AC_SUBST(RC_FLAGS)
-AC_SUBST(COMPILER_TYPE)
+ COMPILER_TYPE=CL
+ CCXXFLAGS="$CCXXFLAGS -nologo"
+ ])
+ AC_SUBST(RC_FLAGS)
+ AC_SUBST(COMPILER_TYPE)
-AC_PROG_CPP
-BASIC_FIXUP_EXECUTABLE(CPP)
+ AC_PROG_CPP
+ BASIC_FIXUP_EXECUTABLE(CPP)
-AC_PROG_CXXCPP
-BASIC_FIXUP_EXECUTABLE(CXXCPP)
+ AC_PROG_CXXCPP
+ BASIC_FIXUP_EXECUTABLE(CXXCPP)
-if test "x$COMPILE_TYPE" != "xcross"; then
+ if test "x$COMPILE_TYPE" != "xcross"; then
# If we are not cross compiling, use the same compilers for
# building the build platform executables. The cross-compilation
# case needed to be done earlier, but this can only be done after
@@ -415,28 +416,28 @@
BUILD_CC="$CC"
BUILD_CXX="$CXX"
BUILD_LD="$LD"
-fi
+ fi
-# for solaris we really need solaris tools, and not gnu equivalent
-# these seems to normally reside in /usr/ccs/bin so add that to path before
-# starting to probe
-#
-# NOTE: I add this /usr/ccs/bin after TOOLS but before OLD_PATH
-# so that it can be overriden --with-tools-dir
-if test "x$OPENJDK_BUILD_OS" = xsolaris; then
+ # for solaris we really need solaris tools, and not gnu equivalent
+ # these seems to normally reside in /usr/ccs/bin so add that to path before
+ # starting to probe
+ #
+ # NOTE: I add this /usr/ccs/bin after TOOLS but before OLD_PATH
+ # so that it can be overriden --with-tools-dir
+ if test "x$OPENJDK_BUILD_OS" = xsolaris; then
PATH="${TOOLS_DIR}:/usr/ccs/bin:${OLD_PATH}"
-fi
+ fi
-# Find the right assembler.
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ # Find the right assembler.
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
AC_PATH_PROG(AS, as)
BASIC_FIXUP_EXECUTABLE(AS)
-else
+ else
AS="$CC -c"
-fi
-AC_SUBST(AS)
+ fi
+ AC_SUBST(AS)
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
AC_PATH_PROG(NM, nm)
BASIC_FIXUP_EXECUTABLE(NM)
AC_PATH_PROG(GNM, gnm)
@@ -445,52 +446,52 @@
BASIC_FIXUP_EXECUTABLE(STRIP)
AC_PATH_PROG(MCS, mcs)
BASIC_FIXUP_EXECUTABLE(MCS)
-elif test "x$OPENJDK_TARGET_OS" != xwindows; then
+ elif test "x$OPENJDK_TARGET_OS" != xwindows; then
AC_CHECK_TOOL(NM, nm)
BASIC_FIXUP_EXECUTABLE(NM)
GNM="$NM"
AC_SUBST(GNM)
AC_CHECK_TOOL(STRIP, strip)
BASIC_FIXUP_EXECUTABLE(STRIP)
-fi
+ fi
-# objcopy is used for moving debug symbols to separate files when
-# full debug symbols are enabled.
-if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
+ # objcopy is used for moving debug symbols to separate files when
+ # full debug symbols are enabled.
+ if test "x$OPENJDK_TARGET_OS" = xsolaris || test "x$OPENJDK_TARGET_OS" = xlinux; then
AC_CHECK_TOOLS(OBJCOPY, [gobjcopy objcopy])
# Only call fixup if objcopy was found.
if test -n "$OBJCOPY"; then
- BASIC_FIXUP_EXECUTABLE(OBJCOPY)
+ BASIC_FIXUP_EXECUTABLE(OBJCOPY)
fi
-fi
+ fi
-AC_CHECK_TOOLS(OBJDUMP, [gobjdump objdump])
-if test "x$OBJDUMP" != x; then
- # Only used for compare.sh; we can live without it. BASIC_FIXUP_EXECUTABLE bails if argument is missing.
- BASIC_FIXUP_EXECUTABLE(OBJDUMP)
-fi
+ AC_CHECK_TOOLS(OBJDUMP, [gobjdump objdump])
+ if test "x$OBJDUMP" != x; then
+ # Only used for compare.sh; we can live without it. BASIC_FIXUP_EXECUTABLE bails if argument is missing.
+ BASIC_FIXUP_EXECUTABLE(OBJDUMP)
+ fi
-if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
- AC_PATH_PROG(LIPO, lipo)
- BASIC_FIXUP_EXECUTABLE(LIPO)
-fi
+ if test "x$OPENJDK_TARGET_OS" = "xmacosx"; then
+ AC_PATH_PROG(LIPO, lipo)
+ BASIC_FIXUP_EXECUTABLE(LIPO)
+ fi
-TOOLCHAIN_SETUP_JTREG
+ TOOLCHAIN_SETUP_JTREG
-# Restore old path without tools dir
-PATH="$OLD_PATH"
+ # Restore old path without tools dir
+ PATH="$OLD_PATH"
])
AC_DEFUN_ONCE([TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_LIBS],
[
-###############################################################################
-#
-# How to compile shared libraries.
-#
+ ###############################################################################
+ #
+ # How to compile shared libraries.
+ #
-if test "x$GCC" = xyes; then
+ if test "x$GCC" = xyes; then
COMPILER_NAME=gcc
PICFLAG="-fPIC"
LIBRARY_PREFIX=lib
@@ -515,398 +516,399 @@
# Linking is different on MacOSX
if test "x$OPENJDK_TARGET_OS" = xmacosx; then
- # Might change in the future to clang.
- COMPILER_NAME=gcc
- SHARED_LIBRARY='lib[$]1.dylib'
- SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
- SHARED_LIBRARY_SUFFIX='.dylib'
- EXE_SUFFIX=''
- SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/[$]1'
- SET_SHARED_LIBRARY_MAPFILE=''
- SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
- SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
- POST_STRIP_CMD="$STRIP -S"
+ # Might change in the future to clang.
+ COMPILER_NAME=gcc
+ SHARED_LIBRARY='lib[$]1.dylib'
+ SHARED_LIBRARY_FLAGS="-dynamiclib -compatibility_version 1.0.0 -current_version 1.0.0 $PICFLAG"
+ SHARED_LIBRARY_SUFFIX='.dylib'
+ EXE_SUFFIX=''
+ SET_SHARED_LIBRARY_NAME='-Xlinker -install_name -Xlinker @rpath/[$]1'
+ SET_SHARED_LIBRARY_MAPFILE=''
+ SET_SHARED_LIBRARY_ORIGIN='-Xlinker -rpath -Xlinker @loader_path/.'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
+ POST_STRIP_CMD="$STRIP -S"
fi
-else
+ else
if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler
- COMPILER_NAME=ossc
- PICFLAG="-KPIC"
- LIBRARY_PREFIX=lib
- SHARED_LIBRARY='lib[$]1.so'
- STATIC_LIBRARY='lib[$]1.a'
- SHARED_LIBRARY_FLAGS="-G"
- SHARED_LIBRARY_SUFFIX='.so'
- STATIC_LIBRARY_SUFFIX='.a'
- OBJ_SUFFIX='.o'
- EXE_SUFFIX=''
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE='-M[$]1'
- C_FLAG_REORDER='-xF'
- CXX_FLAG_REORDER='-xF'
- SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN[$]1'
- SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
- CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
- CFLAGS_JDKLIB_EXTRA='-xstrconst'
- POST_STRIP_CMD="$STRIP -x"
- POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\""
+ # If it is not gcc, then assume it is the Oracle Solaris Studio Compiler
+ COMPILER_NAME=ossc
+ PICFLAG="-KPIC"
+ LIBRARY_PREFIX=lib
+ SHARED_LIBRARY='lib[$]1.so'
+ STATIC_LIBRARY='lib[$]1.a'
+ SHARED_LIBRARY_FLAGS="-G"
+ SHARED_LIBRARY_SUFFIX='.so'
+ STATIC_LIBRARY_SUFFIX='.a'
+ OBJ_SUFFIX='.o'
+ EXE_SUFFIX=''
+ SET_SHARED_LIBRARY_NAME=''
+ SET_SHARED_LIBRARY_MAPFILE='-M[$]1'
+ C_FLAG_REORDER='-xF'
+ CXX_FLAG_REORDER='-xF'
+ SET_SHARED_LIBRARY_ORIGIN='-R\$$$$ORIGIN[$]1'
+ SET_EXECUTABLE_ORIGIN="$SET_SHARED_LIBRARY_ORIGIN"
+ CFLAGS_JDK="${CFLAGS_JDK} -D__solaris__"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} -D__solaris__"
+ CFLAGS_JDKLIB_EXTRA='-xstrconst'
+ POST_STRIP_CMD="$STRIP -x"
+ POST_MCS_CMD="$MCS -d -a \"JDK $FULL_VERSION\""
fi
if test "x$OPENJDK_TARGET_OS" = xwindows; then
- # If it is not gcc, then assume it is the MS Visual Studio compiler
- COMPILER_NAME=cl
- PICFLAG=""
- LIBRARY_PREFIX=
- SHARED_LIBRARY='[$]1.dll'
- STATIC_LIBRARY='[$]1.lib'
- SHARED_LIBRARY_FLAGS="-LD"
- SHARED_LIBRARY_SUFFIX='.dll'
- STATIC_LIBRARY_SUFFIX='.lib'
- OBJ_SUFFIX='.obj'
- EXE_SUFFIX='.exe'
- SET_SHARED_LIBRARY_NAME=''
- SET_SHARED_LIBRARY_MAPFILE=''
- SET_SHARED_LIBRARY_ORIGIN=''
- SET_EXECUTABLE_ORIGIN=''
+ # If it is not gcc, then assume it is the MS Visual Studio compiler
+ COMPILER_NAME=cl
+ PICFLAG=""
+ LIBRARY_PREFIX=
+ SHARED_LIBRARY='[$]1.dll'
+ STATIC_LIBRARY='[$]1.lib'
+ SHARED_LIBRARY_FLAGS="-LD"
+ SHARED_LIBRARY_SUFFIX='.dll'
+ STATIC_LIBRARY_SUFFIX='.lib'
+ OBJ_SUFFIX='.obj'
+ EXE_SUFFIX='.exe'
+ SET_SHARED_LIBRARY_NAME=''
+ SET_SHARED_LIBRARY_MAPFILE=''
+ SET_SHARED_LIBRARY_ORIGIN=''
+ SET_EXECUTABLE_ORIGIN=''
fi
-fi
+ fi
-AC_SUBST(COMPILER_NAME)
-AC_SUBST(OBJ_SUFFIX)
-AC_SUBST(SHARED_LIBRARY)
-AC_SUBST(STATIC_LIBRARY)
-AC_SUBST(LIBRARY_PREFIX)
-AC_SUBST(SHARED_LIBRARY_SUFFIX)
-AC_SUBST(STATIC_LIBRARY_SUFFIX)
-AC_SUBST(EXE_SUFFIX)
-AC_SUBST(SHARED_LIBRARY_FLAGS)
-AC_SUBST(SET_SHARED_LIBRARY_NAME)
-AC_SUBST(SET_SHARED_LIBRARY_MAPFILE)
-AC_SUBST(C_FLAG_REORDER)
-AC_SUBST(CXX_FLAG_REORDER)
-AC_SUBST(SET_SHARED_LIBRARY_ORIGIN)
-AC_SUBST(SET_EXECUTABLE_ORIGIN)
-AC_SUBST(POST_STRIP_CMD)
-AC_SUBST(POST_MCS_CMD)
+ AC_SUBST(COMPILER_NAME)
+ AC_SUBST(OBJ_SUFFIX)
+ AC_SUBST(SHARED_LIBRARY)
+ AC_SUBST(STATIC_LIBRARY)
+ AC_SUBST(LIBRARY_PREFIX)
+ AC_SUBST(SHARED_LIBRARY_SUFFIX)
+ AC_SUBST(STATIC_LIBRARY_SUFFIX)
+ AC_SUBST(EXE_SUFFIX)
+ AC_SUBST(SHARED_LIBRARY_FLAGS)
+ AC_SUBST(SET_SHARED_LIBRARY_NAME)
+ AC_SUBST(SET_SHARED_LIBRARY_MAPFILE)
+ AC_SUBST(C_FLAG_REORDER)
+ AC_SUBST(CXX_FLAG_REORDER)
+ AC_SUBST(SET_SHARED_LIBRARY_ORIGIN)
+ AC_SUBST(SET_EXECUTABLE_ORIGIN)
+ AC_SUBST(POST_STRIP_CMD)
+ AC_SUBST(POST_MCS_CMD)
-# The (cross) compiler is now configured, we can now test capabilities
-# of the target platform.
+ # The (cross) compiler is now configured, we can now test capabilities
+ # of the target platform.
])
AC_DEFUN_ONCE([TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_OPTIMIZATION],
[
-###############################################################################
-#
-# Setup the opt flags for different compilers
-# and different operating systems.
-#
+ ###############################################################################
+ #
+ # Setup the opt flags for different compilers
+ # and different operating systems.
+ #
-#
-# NOTE: check for -mstackrealign needs to be below potential addition of -m32
-#
-if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ #
+ # NOTE: check for -mstackrealign needs to be below potential addition of -m32
+ #
+ if test "x$OPENJDK_TARGET_CPU_BITS" = x32 && test "x$OPENJDK_TARGET_OS" = xmacosx; then
# On 32-bit MacOSX the OS requires C-entry points to be 16 byte aligned.
# While waiting for a better solution, the current workaround is to use -mstackrealign.
CFLAGS="$CFLAGS -mstackrealign"
AC_MSG_CHECKING([if 32-bit compiler supports -mstackrealign])
AC_LINK_IFELSE([AC_LANG_SOURCE([[int main() { return 0; }]])],
- [
- AC_MSG_RESULT([yes])
- ],
- [
- AC_MSG_RESULT([no])
- AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.])
- ])
-fi
+ [
+ AC_MSG_RESULT([yes])
+ ],
+ [
+ AC_MSG_RESULT([no])
+ AC_MSG_ERROR([The selected compiler $CXX does not support -mstackrealign! Try to put another compiler in the path.])
+ ]
+ )
+ fi
-C_FLAG_DEPS="-MMD -MF"
-CXX_FLAG_DEPS="-MMD -MF"
+ C_FLAG_DEPS="-MMD -MF"
+ CXX_FLAG_DEPS="-MMD -MF"
-case $COMPILER_TYPE in
- CC )
- case $COMPILER_NAME in
- gcc )
- case $OPENJDK_TARGET_OS in
- macosx )
- # On MacOSX we optimize for size, something
- # we should do for all platforms?
- C_O_FLAG_HI="-Os"
- C_O_FLAG_NORM="-Os"
- C_O_FLAG_NONE=""
- ;;
- *)
- C_O_FLAG_HI="-O3"
- C_O_FLAG_NORM="-O2"
- C_O_FLAG_NONE="-O0"
- ;;
- esac
- CXX_O_FLAG_HI="$C_O_FLAG_HI"
- CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
- CFLAGS_DEBUG_SYMBOLS="-g"
- CXXFLAGS_DEBUG_SYMBOLS="-g"
- if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
+ case $COMPILER_TYPE in
+ CC )
+ case $COMPILER_NAME in
+ gcc )
+ case $OPENJDK_TARGET_OS in
+ macosx )
+ # On MacOSX we optimize for size, something
+ # we should do for all platforms?
+ C_O_FLAG_HI="-Os"
+ C_O_FLAG_NORM="-Os"
+ C_O_FLAG_NONE=""
+ ;;
+ *)
+ C_O_FLAG_HI="-O3"
+ C_O_FLAG_NORM="-O2"
+ C_O_FLAG_NONE="-O0"
+ ;;
+ esac
+ CXX_O_FLAG_HI="$C_O_FLAG_HI"
+ CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
+ CFLAGS_DEBUG_SYMBOLS="-g"
+ CXXFLAGS_DEBUG_SYMBOLS="-g"
+ if test "x$OPENJDK_TARGET_CPU_BITS" = "x64" && test "x$DEBUG_LEVEL" = "xfastdebug"; then
CFLAGS_DEBUG_SYMBOLS="-g1"
CXXFLAGS_DEBUG_SYMBOLS="-g1"
- fi
- ;;
- ossc )
- #
- # Forte has different names for this with their C++ compiler...
- #
- C_FLAG_DEPS="-xMMD -xMF"
- CXX_FLAG_DEPS="-xMMD -xMF"
+ fi
+ ;;
+ ossc )
+ #
+ # Forte has different names for this with their C++ compiler...
+ #
+ C_FLAG_DEPS="-xMMD -xMF"
+ CXX_FLAG_DEPS="-xMMD -xMF"
- # Extra options used with HIGHEST
- #
- # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
- # done with care, there are some assumptions below that need to
- # be understood about the use of pointers, and IEEE behavior.
- #
- # Use non-standard floating point mode (not IEEE 754)
- CC_HIGHEST="$CC_HIGHEST -fns"
- # Do some simplification of floating point arithmetic (not IEEE 754)
- CC_HIGHEST="$CC_HIGHEST -fsimple"
- # Use single precision floating point with 'float'
- CC_HIGHEST="$CC_HIGHEST -fsingle"
- # Assume memory references via basic pointer types do not alias
- # (Source with excessing pointer casting and data access with mixed
- # pointer types are not recommended)
- CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
- # Use intrinsic or inline versions for math/std functions
- # (If you expect perfect errno behavior, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
- # Loop data dependency optimizations (need -xO3 or higher)
- CC_HIGHEST="$CC_HIGHEST -xdepend"
- # Pointer parameters to functions do not overlap
- # (Similar to -xalias_level=basic usage, but less obvious sometimes.
- # If you pass in multiple pointers to the same data, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xrestrict"
- # Inline some library routines
- # (If you expect perfect errno behavior, do not use this)
- CC_HIGHEST="$CC_HIGHEST -xlibmil"
- # Use optimized math routines
- # (If you expect perfect errno behavior, do not use this)
- # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
- #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
+ # Extra options used with HIGHEST
+ #
+ # WARNING: Use of OPTIMIZATION_LEVEL=HIGHEST in your Makefile needs to be
+ # done with care, there are some assumptions below that need to
+ # be understood about the use of pointers, and IEEE behavior.
+ #
+ # Use non-standard floating point mode (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fns"
+ # Do some simplification of floating point arithmetic (not IEEE 754)
+ CC_HIGHEST="$CC_HIGHEST -fsimple"
+ # Use single precision floating point with 'float'
+ CC_HIGHEST="$CC_HIGHEST -fsingle"
+ # Assume memory references via basic pointer types do not alias
+ # (Source with excessing pointer casting and data access with mixed
+ # pointer types are not recommended)
+ CC_HIGHEST="$CC_HIGHEST -xalias_level=basic"
+ # Use intrinsic or inline versions for math/std functions
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xbuiltin=%all"
+ # Loop data dependency optimizations (need -xO3 or higher)
+ CC_HIGHEST="$CC_HIGHEST -xdepend"
+ # Pointer parameters to functions do not overlap
+ # (Similar to -xalias_level=basic usage, but less obvious sometimes.
+ # If you pass in multiple pointers to the same data, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xrestrict"
+ # Inline some library routines
+ # (If you expect perfect errno behavior, do not use this)
+ CC_HIGHEST="$CC_HIGHEST -xlibmil"
+ # Use optimized math routines
+ # (If you expect perfect errno behavior, do not use this)
+ # Can cause undefined external on Solaris 8 X86 on __sincos, removing for now
+ #CC_HIGHEST="$CC_HIGHEST -xlibmopt"
- if test "x$OPENJDK_TARGET_CPU" = xsparc; then
- CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
- CXXFLAGS_JDK="${CXXFLAGS_JDK} -xmemalign=4s"
- fi
+ if test "x$OPENJDK_TARGET_CPU" = xsparc; then
+ CFLAGS_JDK="${CFLAGS_JDK} -xmemalign=4s"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} -xmemalign=4s"
+ fi
- case $OPENJDK_TARGET_CPU_ARCH in
- x86)
- C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
- C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
- C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
- C_O_FLAG_NONE="-xregs=no%frameptr"
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
- CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
- CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
- CXX_O_FLAG_NONE="-xregs=no%frameptr"
- if test "x$OPENJDK_TARGET_CPU" = xx86; then
- C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
- fi
- ;;
- sparc)
- CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
- C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
- C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0"
- C_O_FLAG_NONE=""
- CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
- CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
- CXX_O_FLAG_NONE=""
- ;;
- esac
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86)
+ C_O_FLAG_HIGHEST="-xO4 -Wu,-O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ C_O_FLAG_HI="-xO4 -Wu,-O4~yz -xregs=no%frameptr"
+ C_O_FLAG_NORM="-xO2 -Wu,-O2~yz -xregs=no%frameptr"
+ C_O_FLAG_NONE="-xregs=no%frameptr"
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption ube -O4~yz $CC_HIGHEST -xregs=no%frameptr"
+ CXX_O_FLAG_HI="-xO4 -Qoption ube -O4~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NORM="-xO2 -Qoption ube -O2~yz -xregs=no%frameptr"
+ CXX_O_FLAG_NONE="-xregs=no%frameptr"
+ if test "x$OPENJDK_TARGET_CPU" = xx86; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST -xchip=pentium"
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HIGHEST -xchip=pentium"
+ fi
+ ;;
+ sparc)
+ CFLAGS_JDKLIB_EXTRA="${CFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
+ CXXFLAGS_JDKLIB_EXTRA="${CXXFLAGS_JDKLIB_EXTRA} -xregs=no%appl"
+ C_O_FLAG_HIGHEST="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
+ C_O_FLAG_HI="-xO4 -Wc,-Qrm-s -Wc,-Qiselect-T0"
+ C_O_FLAG_NORM="-xO2 -Wc,-Qrm-s -Wc,-Qiselect-T0"
+ C_O_FLAG_NONE=""
+ CXX_O_FLAG_HIGHEST="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0 $CC_HIGHEST -xprefetch=auto,explicit -xchip=ultra"
+ CXX_O_FLAG_HI="-xO4 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
+ CXX_O_FLAG_NORM="-xO2 -Qoption cg -Qrm-s -Qoption cg -Qiselect-T0"
+ CXX_O_FLAG_NONE=""
+ ;;
+ esac
- CFLAGS_DEBUG_SYMBOLS="-g -xs"
- CXXFLAGS_DEBUG_SYMBOLS="-g0 -xs"
- esac
- ;;
- CL )
- C_O_FLAG_HIGHEST="-O2"
- C_O_FLAG_HI="-O1"
- C_O_FLAG_NORM="-O1"
- C_O_FLAG_NONE="-Od"
- CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
- CXX_O_FLAG_HI="$C_O_FLAG_HI"
- CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
- ;;
-esac
+ CFLAGS_DEBUG_SYMBOLS="-g -xs"
+ CXXFLAGS_DEBUG_SYMBOLS="-g0 -xs"
+ esac
+ ;;
+ CL )
+ C_O_FLAG_HIGHEST="-O2"
+ C_O_FLAG_HI="-O1"
+ C_O_FLAG_NORM="-O1"
+ C_O_FLAG_NONE="-Od"
+ CXX_O_FLAG_HIGHEST="$C_O_FLAG_HIGHEST"
+ CXX_O_FLAG_HI="$C_O_FLAG_HI"
+ CXX_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_NONE="$C_O_FLAG_NONE"
+ ;;
+ esac
-if test -z "$C_O_FLAG_HIGHEST"; then
- C_O_FLAG_HIGHEST="$C_O_FLAG_HI"
-fi
+ if test -z "$C_O_FLAG_HIGHEST"; then
+ C_O_FLAG_HIGHEST="$C_O_FLAG_HI"
+ fi
-if test -z "$CXX_O_FLAG_HIGHEST"; then
- CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI"
-fi
+ if test -z "$CXX_O_FLAG_HIGHEST"; then
+ CXX_O_FLAG_HIGHEST="$CXX_O_FLAG_HI"
+ fi
-AC_SUBST(C_O_FLAG_HIGHEST)
-AC_SUBST(C_O_FLAG_HI)
-AC_SUBST(C_O_FLAG_NORM)
-AC_SUBST(C_O_FLAG_NONE)
-AC_SUBST(CXX_O_FLAG_HIGHEST)
-AC_SUBST(CXX_O_FLAG_HI)
-AC_SUBST(CXX_O_FLAG_NORM)
-AC_SUBST(CXX_O_FLAG_NONE)
-AC_SUBST(C_FLAG_DEPS)
-AC_SUBST(CXX_FLAG_DEPS)
+ AC_SUBST(C_O_FLAG_HIGHEST)
+ AC_SUBST(C_O_FLAG_HI)
+ AC_SUBST(C_O_FLAG_NORM)
+ AC_SUBST(C_O_FLAG_NONE)
+ AC_SUBST(CXX_O_FLAG_HIGHEST)
+ AC_SUBST(CXX_O_FLAG_HI)
+ AC_SUBST(CXX_O_FLAG_NORM)
+ AC_SUBST(CXX_O_FLAG_NONE)
+ AC_SUBST(C_FLAG_DEPS)
+ AC_SUBST(CXX_FLAG_DEPS)
])
AC_DEFUN_ONCE([TOOLCHAIN_SETUP_COMPILER_FLAGS_FOR_JDK],
[
-if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
- AC_MSG_WARN([Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags])
-fi
+ if test "x$CFLAGS" != "x${ADDED_CFLAGS}"; then
+ AC_MSG_WARN([Ignoring CFLAGS($CFLAGS) found in environment. Use --with-extra-cflags])
+ fi
-if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
- AC_MSG_WARN([Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags])
-fi
+ if test "x$CXXFLAGS" != "x${ADDED_CXXFLAGS}"; then
+ AC_MSG_WARN([Ignoring CXXFLAGS($CXXFLAGS) found in environment. Use --with-extra-cxxflags])
+ fi
-if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
- AC_MSG_WARN([Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags])
-fi
+ if test "x$LDFLAGS" != "x${ADDED_LDFLAGS}"; then
+ AC_MSG_WARN([Ignoring LDFLAGS($LDFLAGS) found in environment. Use --with-extra-ldflags])
+ fi
-AC_ARG_WITH(extra-cflags, [AS_HELP_STRING([--with-extra-cflags],
- [extra flags to be used when compiling jdk c-files])])
+ AC_ARG_WITH(extra-cflags, [AS_HELP_STRING([--with-extra-cflags],
+ [extra flags to be used when compiling jdk c-files])])
-AC_ARG_WITH(extra-cxxflags, [AS_HELP_STRING([--with-extra-cxxflags],
- [extra flags to be used when compiling jdk c++-files])])
+ AC_ARG_WITH(extra-cxxflags, [AS_HELP_STRING([--with-extra-cxxflags],
+ [extra flags to be used when compiling jdk c++-files])])
-AC_ARG_WITH(extra-ldflags, [AS_HELP_STRING([--with-extra-ldflags],
- [extra flags to be used when linking jdk])])
+ AC_ARG_WITH(extra-ldflags, [AS_HELP_STRING([--with-extra-ldflags],
+ [extra flags to be used when linking jdk])])
-CFLAGS_JDK="${CFLAGS_JDK} $with_extra_cflags"
-CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
-LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
+ CFLAGS_JDK="${CFLAGS_JDK} $with_extra_cflags"
+ CXXFLAGS_JDK="${CXXFLAGS_JDK} $with_extra_cxxflags"
+ LDFLAGS_JDK="${LDFLAGS_JDK} $with_extra_ldflags"
-# Hotspot needs these set in their legacy form
-LEGACY_EXTRA_CFLAGS=$with_extra_cflags
-LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
-LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
+ # Hotspot needs these set in their legacy form
+ LEGACY_EXTRA_CFLAGS=$with_extra_cflags
+ LEGACY_EXTRA_CXXFLAGS=$with_extra_cxxflags
+ LEGACY_EXTRA_LDFLAGS=$with_extra_ldflags
-AC_SUBST(LEGACY_EXTRA_CFLAGS)
-AC_SUBST(LEGACY_EXTRA_CXXFLAGS)
-AC_SUBST(LEGACY_EXTRA_LDFLAGS)
+ AC_SUBST(LEGACY_EXTRA_CFLAGS)
+ AC_SUBST(LEGACY_EXTRA_CXXFLAGS)
+ AC_SUBST(LEGACY_EXTRA_LDFLAGS)
-###############################################################################
-#
-# Now setup the CFLAGS and LDFLAGS for the JDK build.
-# Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
-#
-case $COMPILER_NAME in
- gcc )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \
- -pipe \
- -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
- case $OPENJDK_TARGET_CPU_ARCH in
- arm )
- # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
- ;;
- ppc )
- # on ppc we don't prevent gcc to omit frame pointer nor strict-aliasing
- ;;
- * )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fno-omit-frame-pointer"
- CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
+ ###############################################################################
+ #
+ # Now setup the CFLAGS and LDFLAGS for the JDK build.
+ # Later we will also have CFLAGS and LDFLAGS for the hotspot subrepo build.
+ #
+ case $COMPILER_NAME in
+ gcc )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -W -Wall -Wno-unused -Wno-parentheses \
+ -pipe \
+ -D_GNU_SOURCE -D_REENTRANT -D_LARGEFILE64_SOURCE"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ arm )
+ # on arm we don't prevent gcc to omit frame pointer but do prevent strict aliasing
+ CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
;;
- esac
+ ppc )
+ # on ppc we don't prevent gcc to omit frame pointer nor strict-aliasing
+ ;;
+ * )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -fno-omit-frame-pointer"
+ CFLAGS_JDK="${CFLAGS_JDK} -fno-strict-aliasing"
;;
- ossc )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
- case $OPENJDK_TARGET_CPU_ARCH in
- x86 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_TARGET_CPU_LEGACY_LIB"
- CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
- ;;
- esac
-
- CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
- CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
-
- LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
- LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
+ esac
+ ;;
+ ossc )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -DTRACING -DMACRO_MEMSYS_OPS -DBREAKPTS"
+ case $OPENJDK_TARGET_CPU_ARCH in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DcpuIntel -Di586 -D$OPENJDK_TARGET_CPU_LEGACY_LIB"
+ CFLAGS_JDK="$CFLAGS_JDK -erroff=E_BAD_PRAGMA_PACK_VALUE"
;;
- cl )
- CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
- -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
- -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
- -DWIN32 -DIAL"
- case $OPENJDK_TARGET_CPU in
- x86 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
- ;;
- x86_64 )
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
- ;;
- esac
- ;;
-esac
+ esac
+
+ CFLAGS_JDK="$CFLAGS_JDK -xc99=%none -xCC -errshort=tags -Xa -v -mt -W0,-noglobal"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK -errtags=yes +w -mt -features=no%except -DCC_NOEX -norunpath -xnolib"
-###############################################################################
+ LDFLAGS_JDK="$LDFLAGS_JDK -z defs -xildoff -ztext"
+ LDFLAGS_CXX_JDK="$LDFLAGS_CXX_JDK -norunpath -xnolib"
+ ;;
+ cl )
+ CCXXFLAGS_JDK="$CCXXFLAGS $CCXXFLAGS_JDK -Zi -MD -Zc:wchar_t- -W3 -wd4800 \
+ -D_STATIC_CPPLIB -D_DISABLE_DEPRECATE_STATIC_CPPLIB -DWIN32_LEAN_AND_MEAN \
+ -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE \
+ -DWIN32 -DIAL"
+ case $OPENJDK_TARGET_CPU in
+ x86 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_X86_ -Dx86"
+ ;;
+ x86_64 )
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_AMD64_ -Damd64"
+ ;;
+ esac
+ ;;
+ esac
+
+ ###############################################################################
-# Adjust flags according to debug level.
-case $DEBUG_LEVEL in
- fastdebug )
- CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
- CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
- C_O_FLAG_HI="$C_O_FLAG_NORM"
- C_O_FLAG_NORM="$C_O_FLAG_NORM"
- CXX_O_FLAG_HI="$CXX_O_FLAG_NORM"
- CXX_O_FLAG_NORM="$CXX_O_FLAG_NORM"
- JAVAC_FLAGS="$JAVAC_FLAGS -g"
- ;;
- slowdebug )
- CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
- CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
- C_O_FLAG_HI="$C_O_FLAG_NONE"
- C_O_FLAG_NORM="$C_O_FLAG_NONE"
- CXX_O_FLAG_HI="$CXX_O_FLAG_NONE"
- CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE"
- JAVAC_FLAGS="$JAVAC_FLAGS -g"
- ;;
-esac
+ # Adjust flags according to debug level.
+ case $DEBUG_LEVEL in
+ fastdebug )
+ CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
+ C_O_FLAG_HI="$C_O_FLAG_NORM"
+ C_O_FLAG_NORM="$C_O_FLAG_NORM"
+ CXX_O_FLAG_HI="$CXX_O_FLAG_NORM"
+ CXX_O_FLAG_NORM="$CXX_O_FLAG_NORM"
+ JAVAC_FLAGS="$JAVAC_FLAGS -g"
+ ;;
+ slowdebug )
+ CFLAGS_JDK="$CFLAGS_JDK $CFLAGS_DEBUG_SYMBOLS"
+ CXXFLAGS_JDK="$CXXFLAGS_JDK $CXXFLAGS_DEBUG_SYMBOLS"
+ C_O_FLAG_HI="$C_O_FLAG_NONE"
+ C_O_FLAG_NORM="$C_O_FLAG_NONE"
+ CXX_O_FLAG_HI="$CXX_O_FLAG_NONE"
+ CXX_O_FLAG_NORM="$CXX_O_FLAG_NONE"
+ JAVAC_FLAGS="$JAVAC_FLAGS -g"
+ ;;
+ esac
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK $ADD_LP64"
-# The package path is used only on macosx?
-PACKAGE_PATH=/opt/local
-AC_SUBST(PACKAGE_PATH)
+ # The package path is used only on macosx?
+ PACKAGE_PATH=/opt/local
+ AC_SUBST(PACKAGE_PATH)
-if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
+ if test "x$OPENJDK_TARGET_CPU_ENDIAN" = xlittle; then
# The macro _LITTLE_ENDIAN needs to be defined the same to avoid the
# Sun C compiler warning message: warning: macro redefined: _LITTLE_ENDIAN
# (The Solaris X86 system defines this in file /usr/include/sys/isa_defs.h).
# Note: -Dmacro is the same as #define macro 1
- # -Dmacro= is the same as #define macro
+ # -Dmacro= is the same as #define macro
if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN="
else
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_LITTLE_ENDIAN"
fi
-else
+ else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -D_BIG_ENDIAN"
-fi
-if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DLINUX"
-fi
-if test "x$OPENJDK_TARGET_OS" = xwindows; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xwindows; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DWINDOWS"
-fi
-if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DSOLARIS"
-fi
-if test "x$OPENJDK_TARGET_OS" = xmacosx; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xmacosx; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMACOSX -D_ALLBSD_SOURCE -D_DARWIN_UNLIMITED_SELECT"
# Setting these parameters makes it an error to link to macosx APIs that are
# newer than the given OS version and makes the linked binaries compatible even
@@ -919,118 +921,118 @@
# command line.
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DMAC_OS_X_VERSION_MAX_ALLOWED=\$(subst .,,\$(MACOSX_VERSION_MIN)) -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
LDFLAGS_JDK="$LDFLAGS_JDK -mmacosx-version-min=\$(MACOSX_VERSION_MIN)"
-fi
-if test "x$OPENJDK_TARGET_OS" = xbsd; then
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xbsd; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DBSD -D_ALLBSD_SOURCE"
-fi
-if test "x$DEBUG_LEVEL" = xrelease; then
+ fi
+ if test "x$DEBUG_LEVEL" = xrelease; then
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DNDEBUG"
- if test "x$OPENJDK_TARGET_OS" = xsolaris; then
- CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
- fi
-else
+ if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DTRIMMED"
+ fi
+ else
CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DDEBUG"
-fi
+ fi
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DARCH='\"$OPENJDK_TARGET_CPU_LEGACY\"' -D$OPENJDK_TARGET_CPU_LEGACY"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK -DRELEASE='\"$RELEASE\"'"
-CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
- -I${JDK_OUTPUTDIR}/include \
- -I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
- -I${JDK_TOPDIR}/src/share/javavm/export \
- -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
- -I${JDK_TOPDIR}/src/share/native/common \
- -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
+ CCXXFLAGS_JDK="$CCXXFLAGS_JDK \
+ -I${JDK_OUTPUTDIR}/include \
+ -I${JDK_OUTPUTDIR}/include/$OPENJDK_TARGET_OS \
+ -I${JDK_TOPDIR}/src/share/javavm/export \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/javavm/export \
+ -I${JDK_TOPDIR}/src/share/native/common \
+ -I${JDK_TOPDIR}/src/$OPENJDK_TARGET_OS_API_DIR/native/common"
-# The shared libraries are compiled using the picflag.
-CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
-CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA "
+ # The shared libraries are compiled using the picflag.
+ CFLAGS_JDKLIB="$CCXXFLAGS_JDK $CFLAGS_JDK $PICFLAG $CFLAGS_JDKLIB_EXTRA"
+ CXXFLAGS_JDKLIB="$CCXXFLAGS_JDK $CXXFLAGS_JDK $PICFLAG $CXXFLAGS_JDKLIB_EXTRA "
-# Executable flags
-CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK"
-CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK"
+ # Executable flags
+ CFLAGS_JDKEXE="$CCXXFLAGS_JDK $CFLAGS_JDK"
+ CXXFLAGS_JDKEXE="$CCXXFLAGS_JDK $CXXFLAGS_JDK"
-# Now this is odd. The JDK native libraries have to link against libjvm.so
-# On 32-bit machines there is normally two distinct libjvm.so:s, client and server.
-# Which should we link to? Are we lucky enough that the binary api to the libjvm.so library
-# is identical for client and server? Yes. Which is picked at runtime (client or server)?
-# Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following
-# libraries will link to whatever is in memory. Yuck.
-#
-# Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
-if test "x$COMPILER_NAME" = xcl; then
+ # Now this is odd. The JDK native libraries have to link against libjvm.so
+ # On 32-bit machines there is normally two distinct libjvm.so:s, client and server.
+ # Which should we link to? Are we lucky enough that the binary api to the libjvm.so library
+ # is identical for client and server? Yes. Which is picked at runtime (client or server)?
+ # Neither, since the chosen libjvm.so has already been loaded by the launcher, all the following
+ # libraries will link to whatever is in memory. Yuck.
+ #
+ # Thus we offer the compiler to find libjvm.so first in server then in client. It works. Ugh.
+ if test "x$COMPILER_NAME" = xcl; then
LDFLAGS_JDK="$LDFLAGS_JDK -nologo -opt:ref -incremental:no"
if test "x$OPENJDK_TARGET_CPU" = xx86; then
- LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
+ LDFLAGS_JDK="$LDFLAGS_JDK -safeseh"
fi
# TODO: make -debug optional "--disable-full-debug-symbols"
LDFLAGS_JDK="$LDFLAGS_JDK -debug"
LDFLAGS_JDKLIB="${LDFLAGS_JDK} -dll -libpath:${JDK_OUTPUTDIR}/lib"
LDFLAGS_JDKLIB_SUFFIX=""
if test "x$OPENJDK_TARGET_CPU_BITS" = "x64"; then
- LDFLAGS_STACK_SIZE=1048576
+ LDFLAGS_STACK_SIZE=1048576
else
- LDFLAGS_STACK_SIZE=327680
+ LDFLAGS_STACK_SIZE=327680
fi
LDFLAGS_JDKEXE="${LDFLAGS_JDK} /STACK:$LDFLAGS_STACK_SIZE"
-else
+ else
if test "x$COMPILER_NAME" = xgcc; then
- # If this is a --hash-style=gnu system, use --hash-style=both, why?
- HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'`
- if test -n "$HAS_GNU_HASH"; then
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker --hash-style=both "
+ # If this is a --hash-style=gnu system, use --hash-style=both, why?
+ HAS_GNU_HASH=`$CC -dumpspecs 2>/dev/null | $GREP 'hash-style=gnu'`
+ if test -n "$HAS_GNU_HASH"; then
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker --hash-style=both "
+ fi
+ if test "x$OPENJDK_TARGET_OS" = xlinux; then
+ # And since we now know that the linker is gnu, then add -z defs, to forbid
+ # undefined symbols in object files.
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -z -Xlinker defs"
+ if test "x$DEBUG_LEVEL" = "xrelease"; then
+ # When building release libraries, tell the linker optimize them.
+ # Should this be supplied to the OSS linker as well?
+ LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -O1"
fi
- if test "x$OPENJDK_TARGET_OS" = xlinux; then
- # And since we now know that the linker is gnu, then add -z defs, to forbid
- # undefined symbols in object files.
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -z -Xlinker defs"
- if test "x$DEBUG_LEVEL" = "xrelease"; then
- # When building release libraries, tell the linker optimize them.
- # Should this be supplied to the OSS linker as well?
- LDFLAGS_JDK="${LDFLAGS_JDK} -Xlinker -O1"
- fi
- fi
+ fi
fi
LDFLAGS_JDKLIB="${LDFLAGS_JDK} $SHARED_LIBRARY_FLAGS \
- -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
+ -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}"
# On some platforms (mac) the linker warns about non existing -L dirs.
# Add server first if available. Linking aginst client does not always produce the same results.
# Only add client dir if client is being built. Add minimal (note not minimal1) if only building minimal1.
# Default to server for other variants.
if test "x$JVM_VARIANT_SERVER" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
elif test "x$JVM_VARIANT_CLIENT" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/client"
elif test "x$JVM_VARIANT_MINIMAL1" = xtrue; then
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/minimal"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/minimal"
else
- LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
+ LDFLAGS_JDKLIB="${LDFLAGS_JDKLIB} -L${JDK_OUTPUTDIR}/lib${OPENJDK_TARGET_CPU_LIBDIR}/server"
fi
LDFLAGS_JDKLIB_SUFFIX="-ljava -ljvm"
if test "x$COMPILER_NAME" = xossc; then
- LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
+ LDFLAGS_JDKLIB_SUFFIX="$LDFLAGS_JDKLIB_SUFFIX -lc"
fi
LDFLAGS_JDKEXE="${LDFLAGS_JDK}"
if test "x$OPENJDK_TARGET_OS" = xlinux; then
- LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
+ LDFLAGS_JDKEXE="$LDFLAGS_JDKEXE -Xlinker --allow-shlib-undefined"
fi
-fi
+ fi
-AC_SUBST(CFLAGS_JDKLIB)
-AC_SUBST(CFLAGS_JDKEXE)
+ AC_SUBST(CFLAGS_JDKLIB)
+ AC_SUBST(CFLAGS_JDKEXE)
-AC_SUBST(CXXFLAGS_JDKLIB)
-AC_SUBST(CXXFLAGS_JDKEXE)
+ AC_SUBST(CXXFLAGS_JDKLIB)
+ AC_SUBST(CXXFLAGS_JDKEXE)
-AC_SUBST(LDFLAGS_JDKLIB)
-AC_SUBST(LDFLAGS_JDKEXE)
-AC_SUBST(LDFLAGS_JDKLIB_SUFFIX)
-AC_SUBST(LDFLAGS_JDKEXE_SUFFIX)
-AC_SUBST(LDFLAGS_CXX_JDK)
+ AC_SUBST(LDFLAGS_JDKLIB)
+ AC_SUBST(LDFLAGS_JDKEXE)
+ AC_SUBST(LDFLAGS_JDKLIB_SUFFIX)
+ AC_SUBST(LDFLAGS_JDKEXE_SUFFIX)
+ AC_SUBST(LDFLAGS_CXX_JDK)
])
@@ -1046,18 +1048,16 @@
saved_cflags="$CFLAGS"
CFLAGS="$CFLAGS $1"
AC_LANG_PUSH([C])
- AC_COMPILE_IFELSE([
- AC_LANG_SOURCE([[int i;]])
- ], [], [supports=no])
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int i;]])], [],
+ [supports=no])
AC_LANG_POP([C])
CFLAGS="$saved_cflags"
saved_cxxflags="$CXXFLAGS"
CXXFLAGS="$CXXFLAG $1"
AC_LANG_PUSH([C++])
- AC_COMPILE_IFELSE([
- AC_LANG_SOURCE([[int i;]])
- ], [], [supports=no])
+ AC_COMPILE_IFELSE([AC_LANG_SOURCE([[int i;]])], [],
+ [supports=no])
AC_LANG_POP([C++])
CXXFLAGS="$saved_cxxflags"
@@ -1086,8 +1086,8 @@
# Check that the compiler supports -mX flags
# Set COMPILER_SUPPORTS_TARGET_BITS_FLAG to 'true' if it does
TOOLCHAIN_COMPILER_CHECK_ARGUMENTS([-m${OPENJDK_TARGET_CPU_BITS}],
- [COMPILER_SUPPORTS_TARGET_BITS_FLAG=true],
- [COMPILER_SUPPORTS_TARGET_BITS_FLAG=false])
+ [COMPILER_SUPPORTS_TARGET_BITS_FLAG=true],
+ [COMPILER_SUPPORTS_TARGET_BITS_FLAG=false])
AC_SUBST(COMPILER_SUPPORTS_TARGET_BITS_FLAG)
])
@@ -1095,9 +1095,9 @@
AC_DEFUN_ONCE([TOOLCHAIN_SETUP_JTREG],
[
AC_ARG_WITH(jtreg, [AS_HELP_STRING([--with-jtreg],
- [Regression Test Harness @<:@probed@:>@])],
- [],
- [with_jtreg=no])
+ [Regression Test Harness @<:@probed@:>@])],
+ [],
+ [with_jtreg=no])
if test "x$with_jtreg" = xno; then
# jtreg disabled
--- a/common/autoconf/toolchain_windows.m4 Wed Oct 09 18:51:32 2013 -0700
+++ b/common/autoconf/toolchain_windows.m4 Thu Oct 10 14:58:19 2013 +0200
@@ -75,7 +75,7 @@
VCVARSFILE="vc/bin/vcvars32.bat"
else
VCVARSFILE="vc/bin/amd64/vcvars64.bat"
- fi
+ fi
VS_ENV_CMD=""
VS_ENV_ARGS=""
@@ -89,7 +89,7 @@
AC_MSG_NOTICE([The path given by --with-tools-dir does not contain a valid Visual Studio installation])
AC_MSG_NOTICE([Please point to the VC/bin directory within the Visual Studio installation])
AC_MSG_ERROR([Cannot locate a valid Visual Studio installation])
- fi
+ fi
if test "x$VS100COMNTOOLS" != x; then
TOOLCHAIN_CHECK_POSSIBLE_VISUAL_STUDIO_ROOT([$VS100COMNTOOLS/../..], [VS100COMNTOOLS variable])
@@ -118,7 +118,7 @@
# the set env variables into the spec file.
AC_DEFUN([TOOLCHAIN_SETUP_VISUAL_STUDIO_ENV],
[
- # Store path to cygwin link.exe to help excluding it when searching for
+ # Store path to cygwin link.exe to help excluding it when searching for
# VS linker. This must be done before changing the PATH when looking for VS.
AC_PATH_PROG(CYGWIN_LINK, link)
if test "x$CYGWIN_LINK" != x; then
@@ -187,7 +187,7 @@
AC_MSG_ERROR([Cannot continue])
fi
- # Now set all paths and other env variables. This will allow the rest of
+ # Now set all paths and other env variables. This will allow the rest of
# the configure script to find and run the compiler in the proper way.
AC_MSG_NOTICE([Setting extracted environment variables])
. $OUTPUT_ROOT/localdevenv.sh
@@ -198,7 +198,7 @@
# At this point, we should have corrent variables in the environment, or we can't continue.
AC_MSG_CHECKING([for Visual Studio variables])
-
+
if test "x$VCINSTALLDIR" != x || test "x$WindowsSDKDir" != x || test "x$WINDOWSSDKDIR" != x; then
if test "x$INCLUDE" = x || test "x$LIB" = x; then
AC_MSG_RESULT([present but broken])
@@ -228,7 +228,7 @@
AC_MSG_NOTICE([or run "bash.exe -l" from a VS command prompt and then run configure from there.])
AC_MSG_ERROR([Cannot continue])
fi
-
+
AC_MSG_CHECKING([for msvcr100.dll])
AC_ARG_WITH(msvcr-dll, [AS_HELP_STRING([--with-msvcr-dll],
[copy this msvcr100.dll into the built JDK (Windows only) @<:@probed@:>@])])
--- a/common/makefiles/HotspotWrapper.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/HotspotWrapper.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -36,7 +36,7 @@
default: all
# Get all files except .hg in the hotspot directory.
-HOTSPOT_FILES := $(shell $(FIND) -L $(HOTSPOT_TOPDIR) -name ".hg" -prune -o -print)
+HOTSPOT_FILES := $(shell $(FIND) -L $(HOTSPOT_TOPDIR) -name ".hg" -prune -o -print)
# The old build creates hotspot output dir before calling hotspot and
# not doing it breaks builds on msys.
--- a/common/makefiles/IdlCompilation.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/IdlCompilation.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -23,52 +23,52 @@
# questions.
#
-PREFIXES=-pkgPrefix CORBA org.omg \
- -pkgPrefix CosNaming org.omg \
- -pkgPrefix CosTransactions org.omg \
- -pkgPrefix CosTSInteroperation org.omg \
- -pkgPrefix DynamicAny org.omg \
- -pkgPrefix Dynamic org.omg \
- -pkgPrefix IOP org.omg \
- -pkgPrefix Messaging org.omg \
- -pkgPrefix PortableInterceptor org.omg \
- -pkgPrefix PortableServer org.omg \
- -pkgPrefix activation com.sun.corba.se.spi \
- -pkgPrefix GIOP com.sun.corba.se \
- -pkgPrefix PortableActivationIDL com.sun.corba.se \
- -pkgPrefix messages com.sun.corba.se
+PREFIXES=-pkgPrefix CORBA org.omg \
+ -pkgPrefix CosNaming org.omg \
+ -pkgPrefix CosTransactions org.omg \
+ -pkgPrefix CosTSInteroperation org.omg \
+ -pkgPrefix DynamicAny org.omg \
+ -pkgPrefix Dynamic org.omg \
+ -pkgPrefix IOP org.omg \
+ -pkgPrefix Messaging org.omg \
+ -pkgPrefix PortableInterceptor org.omg \
+ -pkgPrefix PortableServer org.omg \
+ -pkgPrefix activation com.sun.corba.se.spi \
+ -pkgPrefix GIOP com.sun.corba.se \
+ -pkgPrefix PortableActivationIDL com.sun.corba.se \
+ -pkgPrefix messages com.sun.corba.se
define add_idl_package
- # param 1 = MYPACKAGE
- # param 2 = src root
- # param 3 = gensrc root
- # param 4 = source idl to compile
- # param 5 = target idl package
- # param 6 = delete these files that were output from the idlj
- # param 7 = idls that match these patterns should be compiled with -oldImplBase
- # param 8 = the idlj command
- # Save the generated java files to a temporary directory so
- # that we can find them and create proper dependencies.
- # After that, we move them to the real gensrc target dir.
- $4_TMPDIR:=tmp___$(subst /,_,$(patsubst $2/%,%,$4))___
- ifneq ($$(filter $7,$4),)
- $4_OLDIMPLBASE:=-oldImplBase
- $4_OLDIMPLBASE_MSG:=with -oldImplBase
- endif
- $5 : $4
+ # param 1 = MYPACKAGE
+ # param 2 = src root
+ # param 3 = gensrc root
+ # param 4 = source idl to compile
+ # param 5 = target idl package
+ # param 6 = delete these files that were output from the idlj
+ # param 7 = idls that match these patterns should be compiled with -oldImplBase
+ # param 8 = the idlj command
+ # Save the generated java files to a temporary directory so
+ # that we can find them and create proper dependencies.
+ # After that, we move them to the real gensrc target dir.
+ $4_TMPDIR:=tmp___$(subst /,_,$(patsubst $2/%,%,$4))___
+ ifneq ($$(filter $7,$4),)
+ $4_OLDIMPLBASE:=-oldImplBase
+ $4_OLDIMPLBASE_MSG:=with -oldImplBase
+ endif
+ $5 : $4
$(MKDIR) -p $3/$$($4_TMPDIR)
$(RM) -rf $3/$$($4_TMPDIR)
$(MKDIR) -p $(dir $5)
- $(ECHO) $(LOG_INFO) Compiling IDL $(patsubst $2/%,%,$4)
+ $(ECHO) $(LOG_INFO) Compiling IDL $(patsubst $2/%,%,$4)
$8 -td $3/$$($4_TMPDIR) \
- -i $2/org/omg/CORBA \
- -i $2/org/omg/PortableInterceptor \
- -i $2/org/omg/PortableServer \
- -D CORBA3 -corba 3.0 \
- -fall \
- $$($4_OLDIMPLBASE) \
- $(PREFIXES) \
- $4
+ -i $2/org/omg/CORBA \
+ -i $2/org/omg/PortableInterceptor \
+ -i $2/org/omg/PortableServer \
+ -D CORBA3 -corba 3.0 \
+ -fall \
+ $$($4_OLDIMPLBASE) \
+ $(PREFIXES) \
+ $4
$(RM) -f $$(addprefix $3/$$($4_TMPDIR)/,$6)
$(CP) -r $3/$$($4_TMPDIR)/* $3
($(CD) $3/$$($4_TMPDIR) && $(FIND) . -type f | $(SED) 's!\./!$3/!g' | $(NAWK) '{ print $$$$1 ": $4" }' > $5)
@@ -76,31 +76,31 @@
endef
define SetupIdlCompilation
-# param 1 is for example BUILD_IDLS
-# param 2,3,4,5,6,7,8 are named args.
-# IDLJ,SRC,BIN,INCLUDES,EXCLUDES,OLDIMPLBASES,DELETES
-$(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
-$(call LogSetupMacroEntry,SetupIdlCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
-$(if $(16),$(error Internal makefile error: Too many arguments to SetupIdlCompilation, please update IdlCompilation.gmk))
+ # param 1 is for example BUILD_IDLS
+ # param 2,3,4,5,6,7,8 are named args.
+ # IDLJ,SRC,BIN,INCLUDES,EXCLUDES,OLDIMPLBASES,DELETES
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupIdlCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupIdlCompilation, please update IdlCompilation.gmk))
-# Find all existing java files and existing class files.
-$$(eval $$(call MakeDir,$$($1_BIN)))
-$1_SRCS := $$(shell find $$($1_SRC) -name "*.idl")
-$1_BINS := $$(shell find $$($1_BIN) -name "*.java")
-# Prepend the source/bin path to the filter expressions.
-$1_SRC_INCLUDES := $$(addprefix $$($1_SRC)/,$$($1_INCLUDES))
-$1_SRC_EXCLUDES := $$(addprefix $$($1_SRC)/,$$($1_EXCLUDES))
-$1_BIN_INCLUDES := $$(addprefix $$($1_BIN)/,$$($1_INCLUDES))
-$1_BIN_EXCLUDES := $$(addprefix $$($1_BIN)/,$$($1_EXCLUDES))
-$1_OLDIMPLBASES := $$(addprefix $$($1_SRC)/,$$($1_OLDIMPLBASES))
-# Now remove unwanted java/class files.
-$1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
-$1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
-$1_BINS := $$(filter $$($1_BIN_INCLUDES),$$($1_BINS))
-$1_BINS := $$(filter-out $$($1_BIN_EXCLUDES),$$($1_BINS))
-$1 := $$(sort $$(patsubst $$($1_SRC)/%.idl,$$($1_BIN)/%.idl.d,$$($1_SRCS)))
-# Now create the dependencies for each idl target.
-$$(foreach p,$$($1),$$(eval $$(call add_idl_package,$1,$$($1_SRC),$$($1_BIN),$$(patsubst $$($1_BIN)/%.idl.d,$$($1_SRC)/%.idl,$$p),$$p,$$($1_DELETES),$$($1_OLDIMPLBASES),$$($1_IDLJ))))
+ # Find all existing java files and existing class files.
+ $$(eval $$(call MakeDir,$$($1_BIN)))
+ $1_SRCS := $$(shell find $$($1_SRC) -name "*.idl")
+ $1_BINS := $$(shell find $$($1_BIN) -name "*.java")
+ # Prepend the source/bin path to the filter expressions.
+ $1_SRC_INCLUDES := $$(addprefix $$($1_SRC)/,$$($1_INCLUDES))
+ $1_SRC_EXCLUDES := $$(addprefix $$($1_SRC)/,$$($1_EXCLUDES))
+ $1_BIN_INCLUDES := $$(addprefix $$($1_BIN)/,$$($1_INCLUDES))
+ $1_BIN_EXCLUDES := $$(addprefix $$($1_BIN)/,$$($1_EXCLUDES))
+ $1_OLDIMPLBASES := $$(addprefix $$($1_SRC)/,$$($1_OLDIMPLBASES))
+ # Now remove unwanted java/class files.
+ $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
+ $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ $1_BINS := $$(filter $$($1_BIN_INCLUDES),$$($1_BINS))
+ $1_BINS := $$(filter-out $$($1_BIN_EXCLUDES),$$($1_BINS))
+ $1 := $$(sort $$(patsubst $$($1_SRC)/%.idl,$$($1_BIN)/%.idl.d,$$($1_SRCS)))
+ # Now create the dependencies for each idl target.
+ $$(foreach p,$$($1),$$(eval $$(call add_idl_package,$1,$$($1_SRC),$$($1_BIN),$$(patsubst $$($1_BIN)/%.idl.d,$$($1_SRC)/%.idl,$$p),$$p,$$($1_DELETES),$$($1_OLDIMPLBASES),$$($1_IDLJ))))
endef
.SUFFIXES: .java .class .package
--- a/common/makefiles/JavaCompilation.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/JavaCompilation.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -35,288 +35,288 @@
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!
-ifeq (,$(_MAKEBASE_GMK))
- $(error You must include MakeBase.gmk prior to including JavaCompilation.gmk)
+ifeq (,$(_MAKEBASE_GMK))
+ $(error You must include MakeBase.gmk prior to including JavaCompilation.gmk)
endif
FALSE_FIND_PATTERN:=-name FILE_NAME_THAT_DOESNT_EXIST
define SetupJavaCompiler
- # param 1 is for example GENERATE_OLD_BYTECODE or GENERATE_NEW_JDKBYTECODE
- # This is the name of the compiler setup.
- # param 2-9 are named args.
- # JVM:=The jvm used to run the javac/javah command
- # JAVAC:=The javac jar and bootstrap classpath changes, or just bin/javac if JVM is left out
- # FLAGS:=Flags to be supplied to javac
- # SERVER_DIR:=Use a javac server (-XDserver) and store the server related files here
- # SERVER_JVM:=Use this JVM for the server. Defaults to the JVM above.
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupJavaCompiler($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
- $(if $(16),$(error Internal makefile error: Too many arguments to SetupJavaCompiler, please update JavaCompilation.gmk))
+ # param 1 is for example GENERATE_OLD_BYTECODE or GENERATE_NEW_JDKBYTECODE
+ # This is the name of the compiler setup.
+ # param 2-9 are named args.
+ # JVM:=The jvm used to run the javac/javah command
+ # JAVAC:=The javac jar and bootstrap classpath changes, or just bin/javac if JVM is left out
+ # FLAGS:=Flags to be supplied to javac
+ # SERVER_DIR:=Use a javac server (-XDserver) and store the server related files here
+ # SERVER_JVM:=Use this JVM for the server. Defaults to the JVM above.
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupJavaCompiler($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupJavaCompiler, please update JavaCompilation.gmk))
- # The port file contains the tcp/ip on which the server listens
- # and the cookie necessary to talk to the server.
- $1_SJAVAC_PORTFILE:=$$($1_SERVER_DIR)/server.port
- # You can use a different JVM to run the background javac server.
- ifeq ($$($1_SERVER_JVM),)
- # It defaults to the same JVM that is used to start the javac command.
- $1_SERVER_JVM:=$$($1_JVM)
- endif
+ # The port file contains the tcp/ip on which the server listens
+ # and the cookie necessary to talk to the server.
+ $1_SJAVAC_PORTFILE:=$$($1_SERVER_DIR)/server.port
+ # You can use a different JVM to run the background javac server.
+ ifeq ($$($1_SERVER_JVM),)
+ # It defaults to the same JVM that is used to start the javac command.
+ $1_SERVER_JVM:=$$($1_JVM)
+ endif
endef
define SetupArchive
- # param 1 is for example ARCHIVE_MYPACKAGE
- # param 2 are the dependecies
- # param 3,4,5,6,7,8,9 are named args.
- # SRCS:=List of directories in where to find files to add to archive
- # SUFFIXES:=File suffixes to include in jar
- # INCLUDES:=List of directories/packages in SRCS that should be included
- # EXCLUDES:=List of directories/packages in SRCS that should be excluded
- # EXCLUDE_FILES:=List of files in SRCS that should be excluded
- # EXTRA_FILES:=List of files in SRCS that should be included regardless of suffix match.
- # JAR:=Jar file to create
- # MANIFEST:=Optional manifest file template.
- # JARMAIN:=Optional main class to add to manifest
- # JARINDEX:=true means generate the index in the jar file.
- # SKIP_METAINF:=Set to prevent contents of an META-INF directory to be automatically
- # added to the archive.
- # EXTRA_MANIFEST_ATTR:=Extra attribute to add to manifest.
- # CHECK_COMPRESS_JAR Check the COMPRESS_JAR variable
+ # param 1 is for example ARCHIVE_MYPACKAGE
+ # param 2 are the dependecies
+ # param 3,4,5,6,7,8,9 are named args.
+ # SRCS:=List of directories in where to find files to add to archive
+ # SUFFIXES:=File suffixes to include in jar
+ # INCLUDES:=List of directories/packages in SRCS that should be included
+ # EXCLUDES:=List of directories/packages in SRCS that should be excluded
+ # EXCLUDE_FILES:=List of files in SRCS that should be excluded
+ # EXTRA_FILES:=List of files in SRCS that should be included regardless of suffix match.
+ # JAR:=Jar file to create
+ # MANIFEST:=Optional manifest file template.
+ # JARMAIN:=Optional main class to add to manifest
+ # JARINDEX:=true means generate the index in the jar file.
+ # SKIP_METAINF:=Set to prevent contents of an META-INF directory to be automatically
+ # added to the archive.
+ # EXTRA_MANIFEST_ATTR:=Extra attribute to add to manifest.
+ # CHECK_COMPRESS_JAR Check the COMPRESS_JAR variable
+
+ # NOTE: $2 is dependencies, not a named argument!
+ $(foreach i,3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupArchive($1),<dependencies>,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(findstring $(LOG_LEVEL),debug trace), $(info *[2] <dependencies> = $(strip $2)))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupArchive, please update JavaCompilation.gmk))
- # NOTE: $2 is dependencies, not a named argument!
- $(foreach i,3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupArchive($1),<dependencies>,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
- $(if $(findstring $(LOG_LEVEL),debug trace), $(info *[2] <dependencies> = $(strip $2)))
- $(if $(16),$(error Internal makefile error: Too many arguments to SetupArchive, please update JavaCompilation.gmk))
+ $1_JARMAIN:=$(strip $$($1_JARMAIN))
+ $1_JARNAME:=$$(notdir $$($1_JAR))
+ $1_MANIFEST_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_manifest
+ $1_DELETESS_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletess
+ $1_DELETES_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletes
+ $1_BIN:=$$(dir $$($1_JAR))
- $1_JARMAIN:=$(strip $$($1_JARMAIN))
- $1_JARNAME:=$$(notdir $$($1_JAR))
- $1_MANIFEST_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_manifest
- $1_DELETESS_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletess
- $1_DELETES_FILE:=$$(dir $$($1_JAR))_the.$$($1_JARNAME)_deletes
- $1_BIN:=$$(dir $$($1_JAR))
-
- ifeq (,$$($1_SUFFIXES))
- # No suffix was set, default to classes.
- $1_SUFFIXES:=.class
+ ifeq (,$$($1_SUFFIXES))
+ # No suffix was set, default to classes.
+ $1_SUFFIXES:=.class
+ endif
+ # Convert suffixes to a find expression
+ $1_FIND_PATTERNS:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_SUFFIXES))
+ # On windows, a lot of includes/excludes risk making the command line too long, so
+ # writing the grep patterns to files.
+ ifneq (,$$($1_INCLUDES))
+ $1_GREP_INCLUDE_PATTERNS:=$$(foreach src,$$($1_SRCS), \
+ $$(addprefix $$(src)/,$$($1_INCLUDES)))
+ # If there are a lot of include patterns, output to file to shorten command lines
+ ifeq ($$(word 20,$$($1_GREP_INCLUDE_PATTERNS)),)
+ $1_GREP_INCLUDES:=| $(GREP) $$(patsubst %,$(SPACE)-e$(SPACE)$(DQUOTE)%$(DQUOTE),$$($1_GREP_INCLUDE_PATTERNS))
+ else
+ $1_GREP_INCLUDE_OUTPUT:=$(RM) $$($1_BIN)/_the.$$($1_JARNAME)_include && \
+ $$(strip $$(call ListPathsSafely,$1_GREP_INCLUDE_PATTERNS,\n, \
+ >> $$($1_BIN)/_the.$$($1_JARNAME)_include))
+ $1_GREP_INCLUDES:=| $(GREP) -f $$($1_BIN)/_the.$$($1_JARNAME)_include
endif
- # Convert suffixes to a find expression
- $1_FIND_PATTERNS:=$(FALSE_FIND_PATTERN) $$(patsubst %,$(SPACE)-o$(SPACE)-name$(SPACE)$(DQUOTE)*%$(DQUOTE),$$($1_SUFFIXES))
- # On windows, a lot of includes/excludes risk making the command line too long, so
- # writing the grep patterns to files.
- ifneq (,$$($1_INCLUDES))
- $1_GREP_INCLUDE_PATTERNS:=$$(foreach src,$$($1_SRCS),\
- $$(addprefix $$(src)/,$$($1_INCLUDES)))
- # If there are a lot of include patterns, output to file to shorten command lines
- ifeq ($$(word 20,$$($1_GREP_INCLUDE_PATTERNS)),)
- $1_GREP_INCLUDES:=| $(GREP) $$(patsubst %,$(SPACE)-e$(SPACE)$(DQUOTE)%$(DQUOTE),$$($1_GREP_INCLUDE_PATTERNS))
- else
- $1_GREP_INCLUDE_OUTPUT:=$(RM) $$($1_BIN)/_the.$$($1_JARNAME)_include && \
- $$(strip $$(call ListPathsSafely,$1_GREP_INCLUDE_PATTERNS,\n, \
- >> $$($1_BIN)/_the.$$($1_JARNAME)_include))
- $1_GREP_INCLUDES:=| $(GREP) -f $$($1_BIN)/_the.$$($1_JARNAME)_include
- endif
- endif
- ifneq (,$$($1_EXCLUDES)$$($1_EXCLUDE_FILES))
- $1_GREP_EXCLUDE_PATTERNS:=$$(foreach src,$$($1_SRCS),$$(addprefix $$(src)/,\
- $$($1_EXCLUDES) $$($1_EXCLUDE_FILES)))
- # If there are a lot of include patterns, output to file to shorten command lines
- ifeq ($$(word 20,$$($1_GREP_EXCLUDE_PATTERNS)),)
- $1_GREP_EXCLUDES:=| $(GREP) -v $$(patsubst %,$(SPACE)-e$(SPACE)$(DQUOTE)%$(DQUOTE),$$($1_GREP_EXCLUDE_PATTERNS))
- else
- $1_GREP_EXCLUDE_OUTPUT=$(RM) $$($1_BIN)/_the.$$($1_JARNAME)_exclude && \
- $$(strip $$(call ListPathsSafely,$1_GREP_EXCLUDE_PATTERNS,\n, \
- >> $$($1_BIN)/_the.$$($1_JARNAME)_exclude))
- $1_GREP_EXCLUDES:=| $(GREP) -v -f $$($1_BIN)/_the.$$($1_JARNAME)_exclude
- endif
- endif
-
- # Check if this jar needs to have its index generated.
- ifneq (,$$($1_JARINDEX))
- $1_JARINDEX = (cd $$(dir $$@) && $(JAR) -i $$(notdir $$@))
+ endif
+ ifneq (,$$($1_EXCLUDES)$$($1_EXCLUDE_FILES))
+ $1_GREP_EXCLUDE_PATTERNS:=$$(foreach src,$$($1_SRCS),$$(addprefix $$(src)/, \
+ $$($1_EXCLUDES) $$($1_EXCLUDE_FILES)))
+ # If there are a lot of include patterns, output to file to shorten command lines
+ ifeq ($$(word 20,$$($1_GREP_EXCLUDE_PATTERNS)),)
+ $1_GREP_EXCLUDES:=| $(GREP) -v $$(patsubst %,$(SPACE)-e$(SPACE)$(DQUOTE)%$(DQUOTE),$$($1_GREP_EXCLUDE_PATTERNS))
else
- $1_JARINDEX = true
+ $1_GREP_EXCLUDE_OUTPUT=$(RM) $$($1_BIN)/_the.$$($1_JARNAME)_exclude && \
+ $$(strip $$(call ListPathsSafely,$1_GREP_EXCLUDE_PATTERNS,\n, \
+ >> $$($1_BIN)/_the.$$($1_JARNAME)_exclude))
+ $1_GREP_EXCLUDES:=| $(GREP) -v -f $$($1_BIN)/_the.$$($1_JARNAME)_exclude
endif
- # When this macro is run in the same makefile as the java compilation, dependencies are
- # transfered in make variables. When the macro is run in a different makefile than the
- # java compilation, the dependencies need to be found in the filesystem.
- ifneq (,$2)
- $1_DEPS:=$2
- else
- $1_DEPS:=$$(filter $$(addprefix %,$$($1_SUFFIXES)),\
- $$(call CacheFind,$$($1_SRCS)))
- ifneq (,$$($1_GREP_INCLUDE_PATTERNS))
- $1_DEPS:=$$(filter $$(addsuffix %,$$($1_GREP_INCLUDE_PATTERNS)),$$($1_DEPS))
- endif
- ifneq (,$$($1_GREP_EXCLUDE_PATTERNS))
- $1_DEPS:=$$(filter-out $$(addsuffix %,$$($1_GREP_EXCLUDE_PATTERNS)),$$($1_DEPS))
- endif
- # The subst of \ is needed because $ has to be escaped with \ in EXTRA_FILES for the command
- # lines, but not here for use in make dependencies.
- $1_DEPS+=$$(subst \,,$$(foreach src,$$($1_SRCS),$$(addprefix $$(src)/,$$($1_EXTRA_FILES))))
- ifeq (,$$($1_SKIP_METAINF))
- $1_DEPS+=$$(call CacheFind,$$(wildcard $$(addsuffix /META-INF,$$($1_SRCS))))
- endif
+ endif
+
+ # Check if this jar needs to have its index generated.
+ ifneq (,$$($1_JARINDEX))
+ $1_JARINDEX = (cd $$(dir $$@) && $(JAR) -i $$(notdir $$@))
+ else
+ $1_JARINDEX = true
+ endif
+ # When this macro is run in the same makefile as the java compilation, dependencies are
+ # transfered in make variables. When the macro is run in a different makefile than the
+ # java compilation, the dependencies need to be found in the filesystem.
+ ifneq (,$2)
+ $1_DEPS:=$2
+ else
+ $1_DEPS:=$$(filter $$(addprefix %,$$($1_SUFFIXES)), \
+ $$(call CacheFind,$$($1_SRCS)))
+ ifneq (,$$($1_GREP_INCLUDE_PATTERNS))
+ $1_DEPS:=$$(filter $$(addsuffix %,$$($1_GREP_INCLUDE_PATTERNS)),$$($1_DEPS))
endif
-
- # Utility macros, to make the shell script receipt somewhat easier to decipher.
-
- # The capture contents macro finds all files (matching the patterns, typically
- # .class and .prp) that are newer than the jar-file, ie the new content to be put into the jar.
- $1_CAPTURE_CONTENTS=$$(foreach src,$$($1_SRCS),\
- (($(FIND) $$(src) -type f -a \( $$($1_FIND_PATTERNS) \) -a -newer $$@ $$($1_GREP_INCLUDES) \
- $$($1_GREP_EXCLUDES) | $(SED) 's|$$(src)/||g' &&\
- $(ECHO) $$(subst $$(src)/,,$$($1_EXTRA_FILES))) > \
- $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
- # The capture metainf macro finds all files below the META-INF directory that are newer than the jar-file.
+ ifneq (,$$($1_GREP_EXCLUDE_PATTERNS))
+ $1_DEPS:=$$(filter-out $$(addsuffix %,$$($1_GREP_EXCLUDE_PATTERNS)),$$($1_DEPS))
+ endif
+ # The subst of \ is needed because $ has to be escaped with \ in EXTRA_FILES for the command
+ # lines, but not here for use in make dependencies.
+ $1_DEPS+=$$(subst \,,$$(foreach src,$$($1_SRCS),$$(addprefix $$(src)/,$$($1_EXTRA_FILES))))
ifeq (,$$($1_SKIP_METAINF))
- $1_CAPTURE_METAINF =$$(foreach src,$$($1_SRCS),($(FIND) $$(src)/META-INF -type f -a -newer $$@ 2> /dev/null | $(SED) 's|$$(src)/||g' >> $$(src)/_the.$$($1_JARNAME)_contents ) $$(NEWLINE))
+ $1_DEPS+=$$(call CacheFind,$$(wildcard $$(addsuffix /META-INF,$$($1_SRCS))))
endif
- # The capture deletes macro finds all deleted files and concatenates them. The resulting file
- # tells us what to remove from the jar-file.
- $1_CAPTURE_DELETES=$$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.deleted -newer $$@ -exec $(SED) 's|$$(src)||g' \{\} >> $$($1_DELETES_FILE) \;) $$(NEWLINE))
- # The update contents macro updates the jar file with the previously capture contents.
- # xargs is used to trim the whitespace from the contents file, to see if it is empty.
- $1_UPDATE_CONTENTS=$$(foreach src,$$($1_SRCS),\
- (cd $$(src) && \
- if [ -n "`$(CAT) _the.$$($1_JARNAME)_contents | $(XARGS)`" ]; then \
- $(ECHO) " updating" `$(WC) -l _the.$$($1_JARNAME)_contents | $(AWK) '{ print $$$$1 }'` files && \
- $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @_the.$$($1_JARNAME)_contents; \
- fi) $$(NEWLINE))
- # The s-variants of the above macros are used when the jar is created from scratch.
- $1_SCAPTURE_CONTENTS=$$(foreach src,$$($1_SRCS),\
- (($(FIND) $$(src) -type f -a \( $$($1_FIND_PATTERNS) \) $$($1_GREP_INCLUDES) \
- $$($1_GREP_EXCLUDES) | $(SED) 's|$$(src)/||g' &&\
- $$(subst $$(src)/,,$(ECHO) $$($1_EXTRA_FILES))) > \
- $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
+ endif
+
+ # Utility macros, to make the shell script receipt somewhat easier to decipher.
- ifeq (,$$($1_SKIP_METAINF))
- $1_SCAPTURE_METAINF=$$(foreach src,$$($1_SRCS),\
- ($(FIND) $$(src)/META-INF -type f 2> /dev/null | $(SED) 's|$$(src)/||g' >> \
- $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
- endif
- $1_SUPDATE_CONTENTS=$$(foreach src,$$($1_SRCS),\
- (cd $$(src) && $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @$$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
-
- # Use a slightly shorter name for logging, but with enough path to identify this jar.
- $1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_JAR))
+ # The capture contents macro finds all files (matching the patterns, typically
+ # .class and .prp) that are newer than the jar-file, ie the new content to be put into the jar.
+ $1_CAPTURE_CONTENTS=$$(foreach src,$$($1_SRCS), \
+ (($(FIND) $$(src) -type f -a \( $$($1_FIND_PATTERNS) \) -a -newer $$@ $$($1_GREP_INCLUDES) \
+ $$($1_GREP_EXCLUDES) | $(SED) 's|$$(src)/||g' && \
+ $(ECHO) $$(subst $$(src)/,,$$($1_EXTRA_FILES))) > \
+ $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
+ # The capture metainf macro finds all files below the META-INF directory that are newer than the jar-file.
+ ifeq (,$$($1_SKIP_METAINF))
+ $1_CAPTURE_METAINF =$$(foreach src,$$($1_SRCS),($(FIND) $$(src)/META-INF -type f -a -newer $$@ 2> /dev/null | $(SED) 's|$$(src)/||g' >> $$(src)/_the.$$($1_JARNAME)_contents ) $$(NEWLINE))
+ endif
+ # The capture deletes macro finds all deleted files and concatenates them. The resulting file
+ # tells us what to remove from the jar-file.
+ $1_CAPTURE_DELETES=$$(foreach src,$$($1_SRCS),($(FIND) $$(src) -name _the.package.deleted -newer $$@ -exec $(SED) 's|$$(src)||g' \{\} >> $$($1_DELETES_FILE) \;) $$(NEWLINE))
+ # The update contents macro updates the jar file with the previously capture contents.
+ # xargs is used to trim the whitespace from the contents file, to see if it is empty.
+ $1_UPDATE_CONTENTS=$$(foreach src,$$($1_SRCS), \
+ (cd $$(src) && \
+ if [ -n "`$(CAT) _the.$$($1_JARNAME)_contents | $(XARGS)`" ]; then \
+ $(ECHO) " updating" `$(WC) -l _the.$$($1_JARNAME)_contents | $(AWK) '{ print $$$$1 }'` files && \
+ $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @_the.$$($1_JARNAME)_contents; \
+ fi) $$(NEWLINE))
+ # The s-variants of the above macros are used when the jar is created from scratch.
+ $1_SCAPTURE_CONTENTS=$$(foreach src,$$($1_SRCS), \
+ (($(FIND) $$(src) -type f -a \( $$($1_FIND_PATTERNS) \) $$($1_GREP_INCLUDES) \
+ $$($1_GREP_EXCLUDES) | $(SED) 's|$$(src)/||g' && \
+ $$(subst $$(src)/,,$(ECHO) $$($1_EXTRA_FILES))) > \
+ $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
- ifneq (,$$($1_CHECK_COMPRESS_JAR))
- $1_JAR_CREATE_OPTIONS := c0fm
- $1_JAR_UPDATE_OPTIONS := u0f
- ifeq ($(COMPRESS_JARS), true)
- $1_JAR_CREATE_OPTIONS := cfm
- $1_JAR_UPDATE_OPTIONS := uf
- endif
- else
- $1_JAR_CREATE_OPTIONS := cfm
- $1_JAR_UPDATE_OPTIONS := uf
+ ifeq (,$$($1_SKIP_METAINF))
+ $1_SCAPTURE_METAINF=$$(foreach src,$$($1_SRCS), \
+ ($(FIND) $$(src)/META-INF -type f 2> /dev/null | $(SED) 's|$$(src)/||g' >> \
+ $$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
+ endif
+ $1_SUPDATE_CONTENTS=$$(foreach src,$$($1_SRCS), \
+ (cd $$(src) && $(JAR) $$($1_JAR_UPDATE_OPTIONS) $$@ @$$(src)/_the.$$($1_JARNAME)_contents) $$(NEWLINE))
+
+ # Use a slightly shorter name for logging, but with enough path to identify this jar.
+ $1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_JAR))
+
+ ifneq (,$$($1_CHECK_COMPRESS_JAR))
+ $1_JAR_CREATE_OPTIONS := c0fm
+ $1_JAR_UPDATE_OPTIONS := u0f
+ ifeq ($(COMPRESS_JARS), true)
+ $1_JAR_CREATE_OPTIONS := cfm
+ $1_JAR_UPDATE_OPTIONS := uf
endif
+ else
+ $1_JAR_CREATE_OPTIONS := cfm
+ $1_JAR_UPDATE_OPTIONS := uf
+ endif
- # Here is the rule that creates/updates the jar file.
- $$($1_JAR) : $$($1_DEPS)
+ # Here is the rule that creates/updates the jar file.
+ $$($1_JAR) : $$($1_DEPS)
$(MKDIR) -p $$($1_BIN)
$$($1_GREP_INCLUDE_OUTPUT)
$$($1_GREP_EXCLUDE_OUTPUT)
- $$(if $$($1_MANIFEST),\
- $(SED) -e "s#@@RELEASE@@#$(RELEASE)#" \
- -e "s#@@COMPANY_NAME@@#$(COMPANY_NAME)#" $$($1_MANIFEST) > $$($1_MANIFEST_FILE) \
- ,\
- $(RM) $$($1_MANIFEST_FILE) && $(TOUCH) $$($1_MANIFEST_FILE))
+ $$(if $$($1_MANIFEST), \
+ $(SED) -e "s#@@RELEASE@@#$(RELEASE)#" \
+ -e "s#@@COMPANY_NAME@@#$(COMPANY_NAME)#" $$($1_MANIFEST) > $$($1_MANIFEST_FILE) \
+ , \
+ $(RM) $$($1_MANIFEST_FILE) && $(TOUCH) $$($1_MANIFEST_FILE))
$$(if $$($1_JARMAIN),$(ECHO) "Main-Class: $$(strip $$($1_JARMAIN))" >> $$($1_MANIFEST_FILE))
$$(if $$($1_EXTRA_MANIFEST_ATTR),$(PRINTF) "$$($1_EXTRA_MANIFEST_ATTR)\n" >> $$($1_MANIFEST_FILE))
- $$(if $$(wildcard $$@),\
- $(ECHO) Modifying $$($1_NAME) $$(NEWLINE)\
- $$($1_CAPTURE_CONTENTS) \
- $$($1_CAPTURE_METAINF) \
- $(RM) $$($1_DELETES_FILE) $$(NEWLINE)\
- $$($1_CAPTURE_DELETES) \
- $(CAT) $$($1_DELETES_FILE) > $$($1_DELETESS_FILE) $$(NEWLINE)\
- if [ -s $$($1_DELETESS_FILE) ]; then \
- $(ECHO) " deleting" `$(WC) -l $$($1_DELETESS_FILE) | $(AWK) '{ print $$$$1 }'` files && \
- $(ZIP) -q -d $$@ `$(CAT) $$($1_DELETESS_FILE)` ; \
- fi $$(NEWLINE) \
- $$($1_UPDATE_CONTENTS) true $$(NEWLINE) \
- $$($1_JARINDEX) && true \
- ,\
- $(ECHO) Creating $$($1_NAME) && $(JAR) $$($1_JAR_CREATE_OPTIONS) $$@ $$($1_MANIFEST_FILE) $$(NEWLINE) \
- $$($1_SCAPTURE_CONTENTS) \
- $$($1_SCAPTURE_METAINF) \
- $$($1_SUPDATE_CONTENTS) \
- $$($1_JARINDEX) && true )
+ $$(if $$(wildcard $$@), \
+ $(ECHO) Modifying $$($1_NAME) $$(NEWLINE) \
+ $$($1_CAPTURE_CONTENTS) \
+ $$($1_CAPTURE_METAINF) \
+ $(RM) $$($1_DELETES_FILE) $$(NEWLINE) \
+ $$($1_CAPTURE_DELETES) \
+ $(CAT) $$($1_DELETES_FILE) > $$($1_DELETESS_FILE) $$(NEWLINE) \
+ if [ -s $$($1_DELETESS_FILE) ]; then \
+ $(ECHO) " deleting" `$(WC) -l $$($1_DELETESS_FILE) | $(AWK) '{ print $$$$1 }'` files && \
+ $(ZIP) -q -d $$@ `$(CAT) $$($1_DELETESS_FILE)` ; \
+ fi $$(NEWLINE) \
+ $$($1_UPDATE_CONTENTS) true $$(NEWLINE) \
+ $$($1_JARINDEX) && true \
+ , \
+ $(ECHO) Creating $$($1_NAME) && $(JAR) $$($1_JAR_CREATE_OPTIONS) $$@ $$($1_MANIFEST_FILE) $$(NEWLINE) \
+ $$($1_SCAPTURE_CONTENTS) \
+ $$($1_SCAPTURE_METAINF) \
+ $$($1_SUPDATE_CONTENTS) \
+ $$($1_JARINDEX) && true )
endef
define SetupZipArchive
- # param 1 is for example ZIP_MYSOURCE
- # param 2,3,4,5,6,7,8,9 are named args.
- # SRC,ZIP,INCLUDES,INCLUDE_FILES,EXCLUDES,EXCLUDE_FILES,SUFFIXES,EXTRA_DEPS
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupZipArchive($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
- $(if $(16),$(error Internal makefile error: Too many arguments to SetupZipArchive, please update JavaCompilation.gmk))
+ # param 1 is for example ZIP_MYSOURCE
+ # param 2,3,4,5,6,7,8,9 are named args.
+ # SRC,ZIP,INCLUDES,INCLUDE_FILES,EXCLUDES,EXCLUDE_FILES,SUFFIXES,EXTRA_DEPS
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupZipArchive($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupZipArchive, please update JavaCompilation.gmk))
- # To avoid running find over too large sets of files, which causes make to crash
- # on some configurations (cygwin), use INCLUDES and INCLUDE_FILES to build a set
- # of directories to run find in, if available.
- ifneq ($$($1_INCLUDES)$$($1_INCLUDE_FILES),)
- $1_FIND_LIST := $$(wildcard $$(foreach i,$$($1_SRC),\
- $$(addprefix $$i/,$$($1_INCLUDES) $$($1_INCLUDE_FILES))))
- else
- $1_FIND_LIST := $$($1_SRC)
- endif
+ # To avoid running find over too large sets of files, which causes make to crash
+ # on some configurations (cygwin), use INCLUDES and INCLUDE_FILES to build a set
+ # of directories to run find in, if available.
+ ifneq ($$($1_INCLUDES)$$($1_INCLUDE_FILES),)
+ $1_FIND_LIST := $$(wildcard $$(foreach i,$$($1_SRC), \
+ $$(addprefix $$i/,$$($1_INCLUDES) $$($1_INCLUDE_FILES))))
+ else
+ $1_FIND_LIST := $$($1_SRC)
+ endif
- # Find all files in the source tree.
- $1_ALL_SRCS := $$(call not-containing,_the.,\
- $$(filter $$(addprefix %,$$($1_SUFFIXES)),$$(call CacheFind,$$($1_FIND_LIST))))
+ # Find all files in the source tree.
+ $1_ALL_SRCS := $$(call not-containing,_the., \
+ $$(filter $$(addprefix %,$$($1_SUFFIXES)),$$(call CacheFind,$$($1_FIND_LIST))))
- ifneq ($$($1_INCLUDES),)
- ifneq ($$($1_SUFFIXES),)
- $1_ZIP_INCLUDES := $$(foreach s,$$($1_SUFFIXES),\
- $$(addprefix -i$(SPACE)$(DQUOTE),$$(addsuffix /*$$s$(DQUOTE),$$($1_INCLUDES))))
- else
- $1_ZIP_INCLUDES := $$(addprefix -i$(SPACE)$(DQUOTE),$$(addsuffix /*$(DQUOTE),$$($1_INCLUDES)))
- endif
- endif
- ifneq ($$($1_INCLUDE_FILES),)
- $1_ZIP_INCLUDES += $$(addprefix -i$(SPACE),$$($1_INCLUDE_FILES))
- endif
- ifneq ($$($1_EXCLUDES),)
- $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
- $1_ZIP_EXCLUDES := $$(addprefix -x$(SPACE)$(DQUOTE),$$(addsuffix /*$(DQUOTE),$$($1_EXCLUDES)))
- $1_ALL_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_SRCS))
+ ifneq ($$($1_INCLUDES),)
+ ifneq ($$($1_SUFFIXES),)
+ $1_ZIP_INCLUDES := $$(foreach s,$$($1_SUFFIXES), \
+ $$(addprefix -i$(SPACE)$(DQUOTE),$$(addsuffix /*$$s$(DQUOTE),$$($1_INCLUDES))))
+ else
+ $1_ZIP_INCLUDES := $$(addprefix -i$(SPACE)$(DQUOTE),$$(addsuffix /*$(DQUOTE),$$($1_INCLUDES)))
endif
+ endif
+ ifneq ($$($1_INCLUDE_FILES),)
+ $1_ZIP_INCLUDES += $$(addprefix -i$(SPACE),$$($1_INCLUDE_FILES))
+ endif
+ ifneq ($$($1_EXCLUDES),)
+ $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
+ $1_ZIP_EXCLUDES := $$(addprefix -x$(SPACE)$(DQUOTE),$$(addsuffix /*$(DQUOTE),$$($1_EXCLUDES)))
+ $1_ALL_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_SRCS))
+ endif
- # Use a slightly shorter name for logging, but with enough path to identify this zip.
- $1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_ZIP))
+ # Use a slightly shorter name for logging, but with enough path to identify this zip.
+ $1_NAME:=$$(subst $$(OUTPUT_ROOT)/,,$$($1_ZIP))
- # Now $1_ALL_SRCS should contain all sources that are going to be put into the zip.
- # I.e. the zip -i and -x options should match the filtering done in the makefile.
- # Explicitly excluded files can be given with absolute path. The patsubst solution
- # isn't perfect but the likelyhood of an absolute path to match something in a src
- # dir is very small.
- # If zip has nothing to do, it returns 12 and would fail the build. Check for 12
- # and only fail if it's not.
- $$($1_ZIP) : $$($1_ALL_SRCS) $$($1_EXTRA_DEPS)
- $(MKDIR) -p $$(@D)
- $(ECHO) Updating $$($1_NAME)
- $$(foreach i,$$($1_SRC),(cd $$i && $(ZIP) -qru $$@ . $$($1_ZIP_INCLUDES) $$($1_ZIP_EXCLUDES) -x \*_the.\* $$(addprefix -x$(SPACE),$$(patsubst $$i/%,%,$$($1_EXCLUDE_FILES))) || test "$$$$?" = "12" )$$(NEWLINE)) true
- $(TOUCH) $$@
+ # Now $1_ALL_SRCS should contain all sources that are going to be put into the zip.
+ # I.e. the zip -i and -x options should match the filtering done in the makefile.
+ # Explicitly excluded files can be given with absolute path. The patsubst solution
+ # isn't perfect but the likelyhood of an absolute path to match something in a src
+ # dir is very small.
+ # If zip has nothing to do, it returns 12 and would fail the build. Check for 12
+ # and only fail if it's not.
+ $$($1_ZIP) : $$($1_ALL_SRCS) $$($1_EXTRA_DEPS)
+ $(MKDIR) -p $$(@D)
+ $(ECHO) Updating $$($1_NAME)
+ $$(foreach i,$$($1_SRC),(cd $$i && $(ZIP) -qru $$@ . $$($1_ZIP_INCLUDES) $$($1_ZIP_EXCLUDES) -x \*_the.\* $$(addprefix -x$(SPACE),$$(patsubst $$i/%,%,$$($1_EXCLUDE_FILES))) || test "$$$$?" = "12" )$$(NEWLINE)) true
+ $(TOUCH) $$@
endef
define add_file_to_copy
- # param 1 = BUILD_MYPACKAGE
- # parma 2 = The source file to copy.
- $2_TARGET:=$2
- # Remove the source prefix.
- $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))
- # Now we can setup the depency that will trigger the copying.
- $$($1_BIN)$$($2_TARGET) : $2
+ # param 1 = BUILD_MYPACKAGE
+ # parma 2 = The source file to copy.
+ $2_TARGET:=$2
+ # Remove the source prefix.
+ $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))
+ # Now we can setup the depency that will trigger the copying.
+ $$($1_BIN)$$($2_TARGET) : $2
$(MKDIR) -p $$(@D)
$(CP) $$< $$@
$(CHMOD) -f ug+w $$@
- # And do not forget this target
- $1_ALL_COPY_TARGETS += $$($1_BIN)$$($2_TARGET)
+ # And do not forget this target
+ $1_ALL_COPY_TARGETS += $$($1_BIN)$$($2_TARGET)
endef
@@ -326,206 +326,206 @@
# This is the new clean standard. Though it is to be superseded by
# a standard annotation processor from with sjavac.
define add_file_to_copy_and_clean
- # param 1 = BUILD_MYPACKAGE
- # parma 2 = The source file to copy and clean.
- $2_TARGET:=$2
- # Remove the source prefix.
- $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))
- # Now we can setup the depency that will trigger the copying.
- $$($1_BIN)$$($2_TARGET) : $2
+ # param 1 = BUILD_MYPACKAGE
+ # parma 2 = The source file to copy and clean.
+ $2_TARGET:=$2
+ # Remove the source prefix.
+ $$(foreach i,$$($1_SRC),$$(eval $$(call remove_string,$$i,$2_TARGET)))
+ # Now we can setup the depency that will trigger the copying.
+ $$($1_BIN)$$($2_TARGET) : $2
$(MKDIR) -p $$(@D)
- $(CAT) $$< | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' -e 's/#.*/#/g' \
- | $(SED) -f "$(SRC_ROOT)/common/makefiles/support/unicode2x.sed" \
- | $(SED) -e '/^#/d' -e '/^$$$$/d' \
- -e :a -e '/\\$$$$/N; s/\\\n//; ta' \
- -e 's/^[ \t]*//;s/[ \t]*$$$$//' \
- -e 's/\\=/=/' | LANG=C $(SORT) > $$@
+ $(CAT) $$< | $(SED) -e 's/\([^\\]\):/\1\\:/g' -e 's/\([^\\]\)=/\1\\=/g' -e 's/#.*/#/g' \
+ | $(SED) -f "$(SRC_ROOT)/common/makefiles/support/unicode2x.sed" \
+ | $(SED) -e '/^#/d' -e '/^$$$$/d' \
+ -e :a -e '/\\$$$$/N; s/\\\n//; ta' \
+ -e 's/^[ \t]*//;s/[ \t]*$$$$//' \
+ -e 's/\\=/=/' | LANG=C $(SORT) > $$@
$(CHMOD) -f ug+w $$@
- # And do not forget this target
- $1_ALL_COPY_CLEAN_TARGETS += $$($1_BIN)$$($2_TARGET)
+ # And do not forget this target
+ $1_ALL_COPY_CLEAN_TARGETS += $$($1_BIN)$$($2_TARGET)
endef
define remove_string
- $2 := $$(subst $1,,$$($2))
+ $2 := $$(subst $1,,$$($2))
endef
define replace_space_with_pathsep
- $1:=$(subst $(SPACE),$(PATH_SEP),$(strip $(patsubst %,%,$2)))
+ $1:=$(subst $(SPACE),$(PATH_SEP),$(strip $(patsubst %,%,$2)))
endef
define SetupJavaCompilation
- # param 1 is for example BUILD_MYPACKAGE
- # param 2,3,4,5,6,7,8 are named args.
- # SETUP:=must point to a previously setup java compiler, for example: SETUP:=BOOTJAVAC
- # JVM:=path to ..bin/java
- # ADD_JAVAC_FLAGS:=javac flags to append to the default ones.
- # SRC:=one or more directories to search for sources
- # BIN:=store classes here
- # INCLUDES:=myapp.foo means will only compile java files in myapp.foo or any of its sub-packages.
- # EXCLUDES:=myapp.foo means will do not compile java files in myapp.foo or any of its sub-packages.
- # COPY:=.prp means copy all prp files to the corresponding package in BIN.
- # CLEAN:=.properties means copy and clean all properties file to the corresponding package in BIN.
- # COPY_FILES:=myapp/foo/setting.txt means copy this file over to the package myapp/foo
- # SRCZIP:=Create a src.zip based on the found sources and copied files.
- # INCLUDE_FILES:="com/sun/SolarisFoobar.java" means only compile this file!
- # EXCLUDE_FILES:="com/sun/SolarisFoobar.java" means do not compile this particular file!
- # "SolarisFoobar.java" means do not compile SolarisFoobar, wherever it is found.
- # JAVAC_SOURCE_PATH_UGLY_OVERRIDE:=Don't use this. This forces an explicit -sourcepath to javac.
- # Its only here until we cleanup some nasty source code pasta in the jdk.
- # HEADERS:=path to directory where all generated c-headers are written.
- # DEPENDS:=Extra dependecy
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupJavaCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
- $(if $(16),$(error Internal makefile error: Too many arguments to SetupJavaCompilation, please update JavaCompilation.gmk))
+ # param 1 is for example BUILD_MYPACKAGE
+ # param 2,3,4,5,6,7,8 are named args.
+ # SETUP:=must point to a previously setup java compiler, for example: SETUP:=BOOTJAVAC
+ # JVM:=path to ..bin/java
+ # ADD_JAVAC_FLAGS:=javac flags to append to the default ones.
+ # SRC:=one or more directories to search for sources
+ # BIN:=store classes here
+ # INCLUDES:=myapp.foo means will only compile java files in myapp.foo or any of its sub-packages.
+ # EXCLUDES:=myapp.foo means will do not compile java files in myapp.foo or any of its sub-packages.
+ # COPY:=.prp means copy all prp files to the corresponding package in BIN.
+ # CLEAN:=.properties means copy and clean all properties file to the corresponding package in BIN.
+ # COPY_FILES:=myapp/foo/setting.txt means copy this file over to the package myapp/foo
+ # SRCZIP:=Create a src.zip based on the found sources and copied files.
+ # INCLUDE_FILES:="com/sun/SolarisFoobar.java" means only compile this file!
+ # EXCLUDE_FILES:="com/sun/SolarisFoobar.java" means do not compile this particular file!
+ # "SolarisFoobar.java" means do not compile SolarisFoobar, wherever it is found.
+ # JAVAC_SOURCE_PATH_UGLY_OVERRIDE:=Don't use this. This forces an explicit -sourcepath to javac.
+ # Its only here until we cleanup some nasty source code pasta in the jdk.
+ # HEADERS:=path to directory where all generated c-headers are written.
+ # DEPENDS:=Extra dependecy
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupJavaCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupJavaCompilation, please update JavaCompilation.gmk))
- # Extract the info from the java compiler setup.
- $1_JVM := $$($$($1_SETUP)_JVM)
- $1_JAVAC := $$($$($1_SETUP)_JAVAC)
- $1_FLAGS := $$($$($1_SETUP)_FLAGS) $(JAVAC_FLAGS) $$($1_ADD_JAVAC_FLAGS)
- ifeq ($$($1_JAVAC),)
- $$(error The Java compilation $1 refers to a non-existant java compiler setup $$($1_SETUP))
- endif
- $1_SJAVAC_PORTFILE := $$($$($1_SETUP)_SJAVAC_PORTFILE)
- $1_SERVER_JVM := $$($$($1_SETUP)_SERVER_JVM)
+ # Extract the info from the java compiler setup.
+ $1_JVM := $$($$($1_SETUP)_JVM)
+ $1_JAVAC := $$($$($1_SETUP)_JAVAC)
+ $1_FLAGS := $$($$($1_SETUP)_FLAGS) $(JAVAC_FLAGS) $$($1_ADD_JAVAC_FLAGS)
+ ifeq ($$($1_JAVAC),)
+ $$(error The Java compilation $1 refers to a non-existant java compiler setup $$($1_SETUP))
+ endif
+ $1_SJAVAC_PORTFILE := $$($$($1_SETUP)_SJAVAC_PORTFILE)
+ $1_SERVER_JVM := $$($$($1_SETUP)_SERVER_JVM)
+
+ # Handle addons and overrides.
+ $1_SRC:=$$(call ADD_SRCS,$$($1_SRC))
+ # Make sure the dirs exist.
+ $$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupJavaCompilation $1 contains missing directory $$d)))
+ $$(eval $$(call MakeDir,$$($1_BIN)))
+ # Find all files in the source trees.
+ $1_ALL_SRCS += $$(filter-out $(OVR_SRCS),$$(call CacheFind,$$($1_SRC)))
+ # Extract the java files.
+ ifneq ($$($1_EXCLUDE_FILES),)
+ $1_EXCLUDE_FILES_PATTERN:=$$(addprefix %,$$($1_EXCLUDE_FILES))
+ endif
+ $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$(filter %.java,$$($1_ALL_SRCS)))
+ ifneq ($$($1_INCLUDE_FILES),)
+ $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
+ $1_SRCS := $$(filter $$($1_INCLUDE_FILES), $$($1_SRCS))
+ endif
+
+ # Now we have a list of all java files to compile: $$($1_SRCS)
+
+ # Create the corresponding smart javac wrapper command line.
+ $1_SJAVAC_ARGS:=$$(addprefix -x ,$$(addsuffix .*,$$(subst /,.,$$($1_EXCLUDES)))) \
+ $$(addprefix -i ,$$(addsuffix .*,$$(subst /,.,$$($1_INCLUDES)))) \
+ $$(addprefix -xf *,$$(strip $$($1_EXCLUDE_FILES))) \
+ $$(addprefix -if *,$$(strip $$($1_INCLUDE_FILES))) \
+ -src "$$(subst $$(SPACE),$$(PATH_SEP),$$(strip $$($1_SRC)))"
- # Handle addons and overrides.
- $1_SRC:=$$(call ADD_SRCS,$$($1_SRC))
- # Make sure the dirs exist.
- $$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupJavaCompilation $1 contains missing directory $$d)))
- $$(eval $$(call MakeDir,$$($1_BIN)))
- # Find all files in the source trees.
- $1_ALL_SRCS += $$(filter-out $(OVR_SRCS),$$(call CacheFind,$$($1_SRC)))
- # Extract the java files.
- ifneq ($$($1_EXCLUDE_FILES),)
- $1_EXCLUDE_FILES_PATTERN:=$$(addprefix %,$$($1_EXCLUDE_FILES))
+ # Prepend the source/bin path to the filter expressions.
+ ifneq ($$($1_INCLUDES),)
+ $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
+ $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
+ endif
+ ifneq ($$($1_EXCLUDES),)
+ $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
+ $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ endif
+
+ # Find all files to be copied from source to bin.
+ ifneq (,$$($1_COPY))
+ # Search for all files to be copied.
+ $1_ALL_COPIES := $$(filter $$(addprefix %,$$($1_COPY)),$$($1_ALL_SRCS))
+ # Copy these explicitly
+ $1_ALL_COPIES += $$($1_COPY_FILES)
+ # Copy must also respect filters.
+ ifneq (,$$($1_INCLUDES))
+ $1_ALL_COPIES := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_COPIES))
endif
- $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$(filter %.java,$$($1_ALL_SRCS)))
- ifneq ($$($1_INCLUDE_FILES),)
- $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
- $1_SRCS := $$(filter $$($1_INCLUDE_FILES), $$($1_SRCS))
+ ifneq (,$$($1_EXCLUDES))
+ $1_ALL_COPIES := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_COPIES))
+ endif
+ ifneq (,$$($1_EXCLUDE_FILES))
+ $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_COPIES))
endif
+ # All files below META-INF are always copied.
+ $1_ALL_COPIES += $$(filter $$(addsuffix /META-INF%,$$($1_SRC)),$$($1_ALL_SRCS))
+ ifneq (,$$($1_ALL_COPIES))
+ # Yep, there are files to be copied!
+ $1_ALL_COPY_TARGETS:=
+ $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i)))
+ # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files!
+ endif
+ endif
- # Now we have a list of all java files to compile: $$($1_SRCS)
-
- # Create the corresponding smart javac wrapper command line.
- $1_SJAVAC_ARGS:=$$(addprefix -x ,$$(addsuffix .*,$$(subst /,.,$$($1_EXCLUDES)))) \
- $$(addprefix -i ,$$(addsuffix .*,$$(subst /,.,$$($1_INCLUDES)))) \
- $$(addprefix -xf *,$$(strip $$($1_EXCLUDE_FILES))) \
- $$(addprefix -if *,$$(strip $$($1_INCLUDE_FILES))) \
- -src "$$(subst $$(SPACE),$$(PATH_SEP),$$(strip $$($1_SRC)))"
+ # Find all property files to be copied and cleaned from source to bin.
+ ifneq (,$$($1_CLEAN))
+ # Search for all files to be copied.
+ $1_ALL_CLEANS := $$(filter $$(addprefix %,$$($1_CLEAN)),$$($1_ALL_SRCS))
+ # Copy and clean must also respect filters.
+ ifneq (,$$($1_INCLUDES))
+ $1_ALL_CLEANS := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_EXCLUDES))
+ $1_ALL_CLEANS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_EXCLUDE_FILES))
+ $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_CLEANS))
+ endif
+ ifneq (,$$($1_ALL_CLEANS))
+ # Yep, there are files to be copied and cleaned!
+ $1_ALL_COPY_CLEAN_TARGETS:=
+ $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_copy_and_clean,$1,$$i)))
+ # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files!
+ endif
+ endif
- # Prepend the source/bin path to the filter expressions.
- ifneq ($$($1_INCLUDES),)
- $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
- $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
- endif
- ifneq ($$($1_EXCLUDES),)
- $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
- $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ # Prep the source paths.
+ ifneq ($$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE),)
+ $$(eval $$(call replace_space_with_pathsep,$1_SRCROOTSC,$$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE)))
+ else
+ $$(eval $$(call replace_space_with_pathsep,$1_SRCROOTSC,$$($1_SRC)))
+ endif
+
+ # Create a sed expression to remove the source roots and to replace / with .
+ # and remove .java at the end.
+ $1_REWRITE_INTO_CLASSES:=$$(foreach i,$$($1_SRC),-e 's|$$i/||g') -e 's|/|.|g' -e 's|.java$$$$||g'
+
+ ifeq ($$($1_DISABLE_SJAVAC)x$$(ENABLE_SJAVAC),xyes)
+ ifneq (,$$($1_HEADERS))
+ $1_HEADERS_ARG := -h $$($1_HEADERS)
endif
- # Find all files to be copied from source to bin.
- ifneq (,$$($1_COPY))
- # Search for all files to be copied.
- $1_ALL_COPIES := $$(filter $$(addprefix %,$$($1_COPY)),$$($1_ALL_SRCS))
- # Copy these explicitly
- $1_ALL_COPIES += $$($1_COPY_FILES)
- # Copy must also respect filters.
- ifneq (,$$($1_INCLUDES))
- $1_ALL_COPIES := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_COPIES))
- endif
- ifneq (,$$($1_EXCLUDES))
- $1_ALL_COPIES := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_COPIES))
- endif
- ifneq (,$$($1_EXCLUDE_FILES))
- $1_ALL_COPIES := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_COPIES))
- endif
- # All files below META-INF are always copied.
- $1_ALL_COPIES += $$(filter $$(addsuffix /META-INF%,$$($1_SRC)),$$($1_ALL_SRCS))
- ifneq (,$$($1_ALL_COPIES))
- # Yep, there are files to be copied!
- $1_ALL_COPY_TARGETS:=
- $$(foreach i,$$($1_ALL_COPIES),$$(eval $$(call add_file_to_copy,$1,$$i)))
- # Now we can depend on $$($1_ALL_COPY_TARGETS) to copy all files!
- endif
- endif
+ # Using sjavac to compile.
+ $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/javac_state
- # Find all property files to be copied and cleaned from source to bin.
- ifneq (,$$($1_CLEAN))
- # Search for all files to be copied.
- $1_ALL_CLEANS := $$(filter $$(addprefix %,$$($1_CLEAN)),$$($1_ALL_SRCS))
- # Copy and clean must also respect filters.
- ifneq (,$$($1_INCLUDES))
- $1_ALL_CLEANS := $$(filter $$($1_SRC_INCLUDES),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_EXCLUDES))
- $1_ALL_CLEANS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_EXCLUDE_FILES))
- $1_ALL_CLEANS := $$(filter-out $$($1_EXCLUDE_FILES_PATTERN),$$($1_ALL_CLEANS))
- endif
- ifneq (,$$($1_ALL_CLEANS))
- # Yep, there are files to be copied and cleaned!
- $1_ALL_COPY_CLEAN_TARGETS:=
- $$(foreach i,$$($1_ALL_CLEANS),$$(eval $$(call add_file_to_copy_and_clean,$1,$$i)))
- # Now we can depend on $$($1_ALL_COPY_CLEAN_TARGETS) to copy all files!
- endif
- endif
+ # Create SJAVAC variable form JAVAC variable. Expects $1_JAVAC to be
+ # "bootclasspathprepend -cp .../javac.jar com.sun.tools.javac.Main"
+ # and javac is simply replaced with sjavac.
+ $1_SJAVAC:=$$(subst com.sun.tools.javac.Main,com.sun.tools.sjavac.Main,$$($1_JAVAC))
+
+ # Set the $1_REMOTE to spawn a background javac server.
+ $1_REMOTE:=--server:portfile=$$($1_SJAVAC_PORTFILE),id=$1,sjavac=$$(subst $$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_SJAVAC))))
- # Prep the source paths.
- ifneq ($$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE),)
- $$(eval $$(call replace_space_with_pathsep,$1_SRCROOTSC,$$($1_JAVAC_SOURCE_PATH_UGLY_OVERRIDE)))
- else
- $$(eval $$(call replace_space_with_pathsep,$1_SRCROOTSC,$$($1_SRC)))
- endif
-
- # Create a sed expression to remove the source roots and to replace / with .
- # and remove .java at the end.
- $1_REWRITE_INTO_CLASSES:=$$(foreach i,$$($1_SRC),-e 's|$$i/||g') -e 's|/|.|g' -e 's|.java$$$$||g'
-
- ifeq ($$($1_DISABLE_SJAVAC)x$$(ENABLE_SJAVAC),xyes)
- ifneq (,$$($1_HEADERS))
- $1_HEADERS_ARG := -h $$($1_HEADERS)
- endif
-
- # Using sjavac to compile.
- $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/javac_state
-
- # Create SJAVAC variable form JAVAC variable. Expects $1_JAVAC to be
- # "bootclasspathprepend -cp .../javac.jar com.sun.tools.javac.Main"
- # and javac is simply replaced with sjavac.
- $1_SJAVAC:=$$(subst com.sun.tools.javac.Main,com.sun.tools.sjavac.Main,$$($1_JAVAC))
-
- # Set the $1_REMOTE to spawn a background javac server.
- $1_REMOTE:=--server:portfile=$$($1_SJAVAC_PORTFILE),id=$1,sjavac=$$(subst $$(SPACE),%20,$$(subst $$(COMMA),%2C,$$(strip $$($1_SERVER_JVM) $$($1_SJAVAC))))
+ $$($1_BIN)/javac_state: $$($1_SRCS) $$($1_DEPENDS)
+ $(MKDIR) -p $$(@D)
+ $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
+ $(ECHO) Compiling $1
+ ($$($1_JVM) $$($1_SJAVAC) \
+ $$($1_REMOTE) \
+ -j $(JOBS) \
+ --permit-unidentified-artifacts \
+ --permit-sources-without-package \
+ --compare-found-sources $$($1_BIN)/_the.batch.tmp \
+ --log=$(LOG_LEVEL) \
+ $$($1_SJAVAC_ARGS) \
+ $$($1_FLAGS) \
+ $$($1_HEADERS_ARG) \
+ -d $$($1_BIN) && \
+ $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
+ else
+ # Using plain javac to batch compile everything.
+ $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/_the.batch
- $$($1_BIN)/javac_state: $$($1_SRCS) $$($1_DEPENDS)
- $(MKDIR) -p $$(@D)
- $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
- $(ECHO) Compiling $1
- ($$($1_JVM) $$($1_SJAVAC) \
- $$($1_REMOTE) \
- -j $(JOBS) \
- --permit-unidentified-artifacts \
- --permit-sources-without-package \
- --compare-found-sources $$($1_BIN)/_the.batch.tmp \
- --log=$(LOG_LEVEL) \
- $$($1_SJAVAC_ARGS) \
- $$($1_FLAGS) \
- $$($1_HEADERS_ARG) \
- -d $$($1_BIN) && \
- $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
- else
- # Using plain javac to batch compile everything.
- $1 := $$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS) $$($1_BIN)/_the.batch
+ # When building in batch, put headers in a temp dir to filter out those that actually
+ # changed before copying them to the real header dir.
+ ifneq (,$$($1_HEADERS))
+ $1_HEADERS_ARG := -h $$($1_HEADERS).tmp
- # When building in batch, put headers in a temp dir to filter out those that actually
- # changed before copying them to the real header dir.
- ifneq (,$$($1_HEADERS))
- $1_HEADERS_ARG := -h $$($1_HEADERS).tmp
-
- $$($1_HEADERS)/_the.headers: $$($1_BIN)/_the.batch
+ $$($1_HEADERS)/_the.headers: $$($1_BIN)/_the.batch
$(MKDIR) -p $$(@D)
for f in `ls $$($1_HEADERS).tmp`; do \
if [ ! -f "$$($1_HEADERS)/$$$$f" ] || [ "`$(DIFF) $$($1_HEADERS)/$$$$f $$($1_HEADERS).tmp/$$$$f`" != "" ]; then \
@@ -535,54 +535,54 @@
$(RM) -r $$($1_HEADERS).tmp
$(TOUCH) $$@
- $1 += $$($1_HEADERS)/_the.headers
- endif
+ $1 += $$($1_HEADERS)/_the.headers
+ endif
- # When not using sjavac, pass along all sources to javac using an @file.
- $$($1_BIN)/_the.batch: $$($1_SRCS) $$($1_DEPENDS)
- $(MKDIR) -p $$(@D)
- $(RM) $$($1_BIN)/_the.batch $$($1_BIN)/_the.batch.tmp
- $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
- $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files for $1
- ($$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) \
- -implicit:none -sourcepath "$$($1_SRCROOTSC)" \
- -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.batch.tmp && \
- $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
+ # When not using sjavac, pass along all sources to javac using an @file.
+ $$($1_BIN)/_the.batch: $$($1_SRCS) $$($1_DEPENDS)
+ $(MKDIR) -p $$(@D)
+ $(RM) $$($1_BIN)/_the.batch $$($1_BIN)/_the.batch.tmp
+ $$(call ListPathsSafely,$1_SRCS,\n, >> $$($1_BIN)/_the.batch.tmp)
+ $(ECHO) Compiling `$(WC) $$($1_BIN)/_the.batch.tmp | $(TR) -s ' ' | $(CUT) -f 2 -d ' '` files for $1
+ ($$($1_JVM) $$($1_JAVAC) $$($1_FLAGS) \
+ -implicit:none -sourcepath "$$($1_SRCROOTSC)" \
+ -d $$($1_BIN) $$($1_HEADERS_ARG) @$$($1_BIN)/_the.batch.tmp && \
+ $(MV) $$($1_BIN)/_the.batch.tmp $$($1_BIN)/_the.batch)
+ endif
+
+ # Check if a jar file was specified, then setup the rules for the jar.
+ ifneq (,$$($1_JAR))
+ # If no suffixes was explicitly set for this jar file.
+ # Use class and the cleaned/copied properties file suffixes as the default
+ # for the types of files to be put into the jar.
+ ifeq (,$$($1_SUFFIXES))
+ $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY)
endif
- # Check if a jar file was specified, then setup the rules for the jar.
- ifneq (,$$($1_JAR))
- # If no suffixes was explicitly set for this jar file.
- # Use class and the cleaned/copied properties file suffixes as the default
- # for the types of files to be put into the jar.
- ifeq (,$$($1_SUFFIXES))
- $1_SUFFIXES:=.class $$($1_CLEAN) $$($1_COPY)
- endif
+ $$(eval $$(call SetupArchive,ARCHIVE_$1,$$($1), \
+ SRCS:=$$($1_BIN), \
+ SUFFIXES:=$$($1_SUFFIXES), \
+ EXCLUDE:=$$($1_EXCLUDES), \
+ INCLUDES:=$$($1_INCLUDES), \
+ EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS), \
+ JAR:=$$($1_JAR), \
+ JARMAIN:=$$($1_JARMAIN), \
+ MANIFEST:=$$($1_MANIFEST), \
+ EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR), \
+ JARINDEX:=$$($1_JARINDEX), \
+ HEADERS:=$$($1_HEADERS), \
+ SETUP:=$$($1_SETUP)))
+ endif
- $$(eval $$(call SetupArchive,ARCHIVE_$1,$$($1),\
- SRCS:=$$($1_BIN),\
- SUFFIXES:=$$($1_SUFFIXES),\
- EXCLUDE:=$$($1_EXCLUDES),\
- INCLUDES:=$$($1_INCLUDES),\
- EXTRA_FILES:=$$($1_ALL_COPY_TARGETS) $$($1_ALL_COPY_CLEAN_TARGETS),\
- JAR:=$$($1_JAR),\
- JARMAIN:=$$($1_JARMAIN),\
- MANIFEST:=$$($1_MANIFEST),\
- EXTRA_MANIFEST_ATTR:=$$($1_EXTRA_MANIFEST_ATTR),\
- JARINDEX:=$$($1_JARINDEX),\
- HEADERS:=$$($1_HEADERS),\
- SETUP:=$$($1_SETUP)))
- endif
-
- # Check if a srczip was specified, then setup the rules for the srczip.
- ifneq (,$$($1_SRCZIP))
- $$(eval $$(call SetupZipArchive,ARCHIVE_$1,\
- SRC:=$$($1_SRC),\
- ZIP:=$$($1_SRCZIP),\
- INCLUDES:=$$($1_INCLUDES),\
- EXCLUDES:=$$($1_EXCLUDES),\
- EXCLUDE_FILES:=$$($1_EXCLUDE_FILES)))
- endif
+ # Check if a srczip was specified, then setup the rules for the srczip.
+ ifneq (,$$($1_SRCZIP))
+ $$(eval $$(call SetupZipArchive,ARCHIVE_$1, \
+ SRC:=$$($1_SRC), \
+ ZIP:=$$($1_SRCZIP), \
+ INCLUDES:=$$($1_INCLUDES), \
+ EXCLUDES:=$$($1_EXCLUDES), \
+ EXCLUDE_FILES:=$$($1_EXCLUDE_FILES)))
+ endif
endef
--- a/common/makefiles/Jprt.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/Jprt.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -23,7 +23,7 @@
# questions.
#
-# This file is included by the root NewerMakefile and contains targets
+# This file is included by the root NewerMakefile and contains targets
# and utilities needed by JPRT.
# Utilities used in this Makefile. Most of this makefile executes without
@@ -36,7 +36,7 @@
PRINTF=printf
PWD=pwd
# Insure we have a path that looks like it came from pwd
-# (This is mostly for Windows sake and drive letters)
+# (This is mostly for Windows sake and drive letters)
define UnixPath # path
$(shell (cd "$1" && $(PWD)))
endef
@@ -47,19 +47,19 @@
OPEN_BUILD=true
else
OPEN_BUILD := $(if $(or $(wildcard $(root_dir)/jdk/src/closed), \
- $(wildcard $(root_dir)/jdk/make/closed), \
- $(wildcard $(root_dir)/jdk/test/closed), \
- $(wildcard $(root_dir)/hotspot/src/closed), \
- $(wildcard $(root_dir)/hotspot/make/closed), \
- $(wildcard $(root_dir)/hotspot/test/closed)), \
- false,true)
+ $(wildcard $(root_dir)/jdk/make/closed), \
+ $(wildcard $(root_dir)/jdk/test/closed), \
+ $(wildcard $(root_dir)/hotspot/src/closed), \
+ $(wildcard $(root_dir)/hotspot/make/closed), \
+ $(wildcard $(root_dir)/hotspot/test/closed)), \
+ false,true)
endif
HOTSPOT_AVAILABLE := $(if $(wildcard $(root_dir)/hotspot),true,false)
###########################################################################
# To help in adoption of the new configure&&make build process, a bridge
-# build will use the old settings to run configure and do the build.
+# build will use the old settings to run configure and do the build.
# Build with the configure bridge. After running configure, restart make
# to parse the new spec file.
@@ -85,80 +85,80 @@
$(RM) $@.tmp
$(MKDIR) -p $(BUILD_DIR_ROOT)
@$(ECHO) " --with-debug-level=$(if $(DEBUG_LEVEL),$(DEBUG_LEVEL),release) " >> $@.tmp
-ifdef ARCH_DATA_MODEL
- @$(ECHO) " --with-target-bits=$(ARCH_DATA_MODEL) " >> $@.tmp
-endif
-ifeq ($(ARCH_DATA_MODEL),32)
- @$(ECHO) " --with-jvm-variants=client,server " >> $@.tmp
-endif
-ifdef ALT_PARALLEL_COMPILE_JOBS
- @$(ECHO) " --with-num-cores=$(ALT_PARALLEL_COMPILE_JOBS) " >> $@.tmp
-endif
-ifdef ALT_BOOTDIR
- @$(ECHO) " --with-boot-jdk=$(call UnixPath,$(ALT_BOOTDIR)) " >> $@.tmp
-endif
-ifdef ALT_CUPS_HEADERS_PATH
- @$(ECHO) " --with-cups-include=$(call UnixPath,$(ALT_CUPS_HEADERS_PATH)) " >> $@.tmp
-endif
-ifdef ALT_FREETYPE_HEADERS_PATH
- @$(ECHO) " --with-freetype=$(call UnixPath,$(ALT_FREETYPE_HEADERS_PATH)/..) " >> $@.tmp
-endif
-ifdef ENABLE_SJAVAC
- @$(ECHO) " --enable-sjavac" >> $@.tmp
-endif
-ifeq ($(HOTSPOT_AVAILABLE),false)
- ifdef ALT_JDK_IMPORT_PATH
- @$(ECHO) " --with-import-hotspot=$(call UnixPath,$(ALT_JDK_IMPORT_PATH)) " >> $@.tmp
- endif
-endif
-ifeq ($(OPEN_BUILD),true)
- @$(ECHO) " --enable-openjdk-only " >> $@.tmp
-else
- # Todo: move to closed?
- ifdef ALT_MOZILLA_HEADERS_PATH
- @$(ECHO) " --with-mozilla-headers=$(call UnixPath,$(ALT_MOZILLA_HEADERS_PATH)) " >> $@.tmp
- endif
- ifdef ALT_JUNIT_DIR
- @$(ECHO) " --with-junit-dir=$(call UnixPath,$(ALT_JUNIT_DIR)) " >> $@.tmp
- endif
- ifdef ANT_HOME
- @$(ECHO) " --with-ant-home=$(call UnixPath,$(ANT_HOME)) " >> $@.tmp
- endif
- ifdef ALT_JAVAFX_ZIP_DIR
- @$(ECHO) " --with-javafx-zip-dir=$(call UnixPath,$(ALT_JAVAFX_ZIP_DIR)) " >> $@.tmp
- endif
- ifdef ALT_JMC_ZIP_DIR
- @$(ECHO) " --with-jmc-zip-dir=$(call UnixPath,$(ALT_JMC_ZIP_DIR)) " >> $@.tmp
- endif
- ifdef ALT_WIXDIR
- @$(ECHO) " --with-wix=$(call UnixPath,$(ALT_WIXDIR)) " >> $@.tmp
- endif
- ifdef ALT_INSTALL_LZMA_PATH
- @$(ECHO) " --with-lzma-path=$(call UnixPath,$(ALT_INSTALL_LZMA_PATH)) " >> $@.tmp
- endif
- ifdef ALT_INSTALL_UPX_PATH
- @$(ECHO) " --with-upx-path=$(call UnixPath,$(ALT_INSTALL_UPX_PATH)) " >> $@.tmp
- endif
- ifdef ALT_INSTALL_UPX_FILENAME
- @$(ECHO) " --with-upx-filename=$(call UnixPath,$(ALT_INSTALL_UPX_FILENAME)) " >> $@.tmp
- endif
- ifdef ALT_CCSS_SIGNING_DIR
- @$(ECHO) " --with-ccss-signing=$(call UnixPath,$(ALT_CCSS_SIGNING_DIR)) " >> $@.tmp
- endif
- ifdef ALT_SLASH_JAVA
- @$(ECHO) " --with-java-devtools=$(call UnixPath,$(ALT_SLASH_JAVA)/devtools) " >> $@.tmp
- endif
- ifdef ALT_SPARKLE_FRAMEWORK_DIR
- @$(ECHO) " --with-sparkle-framework=$(call UnixPath,$(ALT_SPARKLE_FRAMEWORK_DIR)) " >> $@.tmp
- endif
-endif
+ ifdef ARCH_DATA_MODEL
+ @$(ECHO) " --with-target-bits=$(ARCH_DATA_MODEL) " >> $@.tmp
+ endif
+ ifeq ($(ARCH_DATA_MODEL),32)
+ @$(ECHO) " --with-jvm-variants=client,server " >> $@.tmp
+ endif
+ ifdef ALT_PARALLEL_COMPILE_JOBS
+ @$(ECHO) " --with-num-cores=$(ALT_PARALLEL_COMPILE_JOBS) " >> $@.tmp
+ endif
+ ifdef ALT_BOOTDIR
+ @$(ECHO) " --with-boot-jdk=$(call UnixPath,$(ALT_BOOTDIR)) " >> $@.tmp
+ endif
+ ifdef ALT_CUPS_HEADERS_PATH
+ @$(ECHO) " --with-cups-include=$(call UnixPath,$(ALT_CUPS_HEADERS_PATH)) " >> $@.tmp
+ endif
+ ifdef ALT_FREETYPE_HEADERS_PATH
+ @$(ECHO) " --with-freetype=$(call UnixPath,$(ALT_FREETYPE_HEADERS_PATH)/..) " >> $@.tmp
+ endif
+ ifdef ENABLE_SJAVAC
+ @$(ECHO) " --enable-sjavac" >> $@.tmp
+ endif
+ ifeq ($(HOTSPOT_AVAILABLE),false)
+ ifdef ALT_JDK_IMPORT_PATH
+ @$(ECHO) " --with-import-hotspot=$(call UnixPath,$(ALT_JDK_IMPORT_PATH)) " >> $@.tmp
+ endif
+ endif
+ ifeq ($(OPEN_BUILD),true)
+ @$(ECHO) " --enable-openjdk-only " >> $@.tmp
+ else
+# Todo: move to closed?
+ ifdef ALT_MOZILLA_HEADERS_PATH
+ @$(ECHO) " --with-mozilla-headers=$(call UnixPath,$(ALT_MOZILLA_HEADERS_PATH)) " >> $@.tmp
+ endif
+ ifdef ALT_JUNIT_DIR
+ @$(ECHO) " --with-junit-dir=$(call UnixPath,$(ALT_JUNIT_DIR)) " >> $@.tmp
+ endif
+ ifdef ANT_HOME
+ @$(ECHO) " --with-ant-home=$(call UnixPath,$(ANT_HOME)) " >> $@.tmp
+ endif
+ ifdef ALT_JAVAFX_ZIP_DIR
+ @$(ECHO) " --with-javafx-zip-dir=$(call UnixPath,$(ALT_JAVAFX_ZIP_DIR)) " >> $@.tmp
+ endif
+ ifdef ALT_JMC_ZIP_DIR
+ @$(ECHO) " --with-jmc-zip-dir=$(call UnixPath,$(ALT_JMC_ZIP_DIR)) " >> $@.tmp
+ endif
+ ifdef ALT_WIXDIR
+ @$(ECHO) " --with-wix=$(call UnixPath,$(ALT_WIXDIR)) " >> $@.tmp
+ endif
+ ifdef ALT_INSTALL_LZMA_PATH
+ @$(ECHO) " --with-lzma-path=$(call UnixPath,$(ALT_INSTALL_LZMA_PATH)) " >> $@.tmp
+ endif
+ ifdef ALT_INSTALL_UPX_PATH
+ @$(ECHO) " --with-upx-path=$(call UnixPath,$(ALT_INSTALL_UPX_PATH)) " >> $@.tmp
+ endif
+ ifdef ALT_INSTALL_UPX_FILENAME
+ @$(ECHO) " --with-upx-filename=$(call UnixPath,$(ALT_INSTALL_UPX_FILENAME)) " >> $@.tmp
+ endif
+ ifdef ALT_CCSS_SIGNING_DIR
+ @$(ECHO) " --with-ccss-signing=$(call UnixPath,$(ALT_CCSS_SIGNING_DIR)) " >> $@.tmp
+ endif
+ ifdef ALT_SLASH_JAVA
+ @$(ECHO) " --with-java-devtools=$(call UnixPath,$(ALT_SLASH_JAVA)/devtools) " >> $@.tmp
+ endif
+ ifdef ALT_SPARKLE_FRAMEWORK_DIR
+ @$(ECHO) " --with-sparkle-framework=$(call UnixPath,$(ALT_SPARKLE_FRAMEWORK_DIR)) " >> $@.tmp
+ endif
+ endif
@if [ -f $@ ] ; then \
- if ! $(CMP) $@ $@.tmp > /dev/null ; then \
- $(CP) $@.tmp $@ ; \
- fi ; \
- else \
- $(CP) $@.tmp $@ ; \
- fi
+ if ! $(CMP) $@ $@.tmp > /dev/null ; then \
+ $(CP) $@.tmp $@ ; \
+ fi ; \
+ else \
+ $(CP) $@.tmp $@ ; \
+ fi
$(RM) $@.tmp
PHONY_LIST += bridge2configure bridgeBuild
@@ -170,7 +170,7 @@
JPRT_ARCHIVE_BUNDLE=/tmp/jprt_bundles/j2sdk-image.zip
endif
ifndef JPRT_ARCHIVE_INSTALL_BUNDLE
- JPRT_ARCHIVE_INSTALL_BUNDLE=/tmp/jprt_bundles/product-install.zip
+ JPRT_ARCHIVE_INSTALL_BUNDLE=/tmp/jprt_bundles/product-install.zip
endif
# These targets execute in a SPEC free context, before calling bridgeBuild
@@ -212,9 +212,9 @@
$(MKDIR) -p $(BUILD_OUTPUT)/bundles
$(CD) $(SRC_JDK_IMAGE_DIR) && $(ZIP) -y -q -r $(BUILD_OUTPUT)/bundles/$(JDK_IMAGE_SUBDIR).zip .
$(CD) $(SRC_JRE_IMAGE_DIR) && $(ZIP) -y -q -r $(BUILD_OUTPUT)/bundles/$(JRE_IMAGE_SUBDIR).zip .
- if [ -d $(BUILD_OUTPUT)/install/bundles ] ; then \
- $(CD) $(BUILD_OUTPUT)/install/bundles && $(ZIP) -y -q -r $(JPRT_ARCHIVE_INSTALL_BUNDLE) . ; \
- fi
+ if [ -d $(BUILD_OUTPUT)/install/bundles ] ; then \
+ $(CD) $(BUILD_OUTPUT)/install/bundles && $(ZIP) -y -q -r $(JPRT_ARCHIVE_INSTALL_BUNDLE) . ; \
+ fi
@$(call TargetExit)
# Copy images to one unified location regardless of platform etc.
@@ -226,19 +226,19 @@
$(MKDIR) -p $(BUILD_OUTPUT)/final-images/$(JRE_IMAGE_SUBDIR)
$(CP) -R -P $(SRC_JDK_IMAGE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JDK_IMAGE_SUBDIR)/
$(CP) -R -P $(SRC_JRE_IMAGE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JRE_IMAGE_SUBDIR)/
-ifeq ($(OPENJDK_TARGET_OS),macosx)
- $(MKDIR) -p $(BUILD_OUTPUT)/final-images/$(JDK_BUNDLE_SUBDIR)
- $(MKDIR) -p $(BUILD_OUTPUT)/final-images/$(JRE_BUNDLE_SUBDIR)
- $(CP) -R -P $(SRC_JDK_BUNDLE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JDK_BUNDLE_SUBDIR)/
- $(CP) -R -P $(SRC_JRE_BUNDLE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JRE_BUNDLE_SUBDIR)/
-endif
+ ifeq ($(OPENJDK_TARGET_OS),macosx)
+ $(MKDIR) -p $(BUILD_OUTPUT)/final-images/$(JDK_BUNDLE_SUBDIR)
+ $(MKDIR) -p $(BUILD_OUTPUT)/final-images/$(JRE_BUNDLE_SUBDIR)
+ $(CP) -R -P $(SRC_JDK_BUNDLE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JDK_BUNDLE_SUBDIR)/
+ $(CP) -R -P $(SRC_JRE_BUNDLE_DIR)/* $(BUILD_OUTPUT)/final-images/$(JRE_BUNDLE_SUBDIR)/
+ endif
@$(call TargetExit)
# Keep track of phony targets
PHONY_LIST += jprt_build_product jprt_build_fastdebug jprt_build_debug \
- jprt_build_generic bundles jprt_bundle \
- final-images final-images-only
+ jprt_build_generic bundles jprt_bundle \
+ final-images final-images-only
###########################################################################
# Phony targets
--- a/common/makefiles/Main.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/Main.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -28,7 +28,7 @@
# Now load the spec
include $(SPEC)
-# Load the vital tools for all the makefiles.
+# Load the vital tools for all the makefiles.
include $(SRC_ROOT)/common/makefiles/MakeBase.gmk
# Include the corresponding custom file, if present.
@@ -38,19 +38,19 @@
# Remove any build.log from a previous run, if they exist
ifneq (,$(BUILD_LOG))
- ifneq (,$(BUILD_LOG_PREVIOUS))
- # Rotate old log
- $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
- $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
- else
- $(shell $(RM) $(BUILD_LOG) 2> /dev/null)
- endif
- $(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
+ ifneq (,$(BUILD_LOG_PREVIOUS))
+ # Rotate old log
+ $(shell $(RM) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
+ $(shell $(MV) $(BUILD_LOG) $(BUILD_LOG_PREVIOUS) 2> /dev/null)
+ else
+ $(shell $(RM) $(BUILD_LOG) 2> /dev/null)
+ endif
+ $(shell $(RM) $(OUTPUT_ROOT)/build-trace-time.log 2> /dev/null)
endif
# Remove any javac server logs and port files. This
# prevents a new make run to reuse the previous servers.
ifneq (,$(SJAVAC_SERVER_DIR))
- $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
+ $(shell $(MKDIR) -p $(SJAVAC_SERVER_DIR) && $(RM) -rf $(SJAVAC_SERVER_DIR)/*)
endif
# Reset the build timers.
@@ -103,8 +103,8 @@
@$(call TargetExit)
ifeq ($(BUILD_HOTSPOT),true)
-hotspot: hotspot-only
-hotspot-only: start-make
+ hotspot: hotspot-only
+ hotspot-only: start-make
@$(call TargetEnter)
@($(CD) $(SRC_ROOT)/common/makefiles && $(BUILD_LOG_WRAPPER) $(MAKE) $(MAKE_ARGS) -f HotspotWrapper.gmk)
@$(call TargetExit)
@@ -149,9 +149,9 @@
@$(call TargetExit)
profiles-oscheck:
-ifneq ($(OPENJDK_TARGET_OS), linux)
- @echo "Error: The Java SE 8 Compact Profiles are only implemented for Linux at this time" && exit 1
-endif
+ ifneq ($(OPENJDK_TARGET_OS), linux)
+ @echo "Error: The Java SE 8 Compact Profiles are only implemented for Linux at this time" && exit 1
+ endif
install: images install-only
install-only: start-make
@@ -202,12 +202,12 @@
dist-clean: clean
@($(CD) $(OUTPUT_ROOT) && $(RM) -r *spec.gmk config.* configure-arguments Makefile compare.sh spec.sh tmp javacservers)
@$(if $(filter $(CONF_NAME),$(notdir $(OUTPUT_ROOT))), \
- if test "x`$(LS) $(OUTPUT_ROOT)`" != x; then \
- $(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ;\
- else \
- ($(CD) $(SRC_ROOT) && $(ECHO) "Removing configuration directory for '$(CONF_NAME)'" && $(RM) -r $(OUTPUT_ROOT)) \
- fi \
- )
+ if test "x`$(LS) $(OUTPUT_ROOT)`" != x; then \
+ $(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ; \
+ else \
+ ($(CD) $(SRC_ROOT) && $(ECHO) "Removing configuration directory for '$(CONF_NAME)'" && $(RM) -r $(OUTPUT_ROOT)) \
+ fi \
+ )
@$(ECHO) Cleaned everything, you will have to re-run configure.
clean-langtools:
--- a/common/makefiles/MakeBase.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/MakeBase.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -48,314 +48,314 @@
$(compress_post)
decompress_paths=$(SED) -f $(SRC_ROOT)/common/makefiles/support/ListPathsSafely-uncompress.sed -e 's|X99|\\n|g' \
- -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
- -e 's|X00|X|g' | tr '\n' '$2'
+ -e 's|X98|$(OUTPUT_ROOT)|g' -e 's|X97|$(SRC_ROOT)|g' \
+ -e 's|X00|X|g' | tr '\n' '$2'
define ListPathsSafely_If
- $(if $(word $3,$($1)),$(eval $1_LPS$3:=$(call compress_paths,$(wordlist $3,$4,$($1)))))
+ $(if $(word $3,$($1)),$(eval $1_LPS$3:=$(call compress_paths,$(wordlist $3,$4,$($1)))))
endef
define ListPathsSafely_Printf
- $(if $(strip $($1_LPS$4)),printf -- "$(strip $($1_LPS$4))\n" | $(decompress_paths) $3)
+ $(if $(strip $($1_LPS$4)),printf -- "$(strip $($1_LPS$4))\n" | $(decompress_paths) $3)
endef
# Receipt example:
-# rm -f thepaths
-# $(call ListPathsSafely,THEPATHS,\n, >> thepaths)
-# The \n argument means translate spaces into \n
-# if instead , , (a space) is supplied, then spaces remain spaces.
+# rm -f thepaths
+# $(call ListPathsSafely,THEPATHS,\n, >> thepaths)
+# The \n argument means translate spaces into \n
+# if instead , , (a space) is supplied, then spaces remain spaces.
define ListPathsSafely
- $(if $(word 16001,$($1)),$(error Cannot list safely more than 16000 paths. $1 has $(words $($1)) paths!))
- $(call ListPathsSafely_If,$1,$2,1,250)
- $(call ListPathsSafely_If,$1,$2,251,500)
- $(call ListPathsSafely_If,$1,$2,501,750)
- $(call ListPathsSafely_If,$1,$2,751,1000)
+ $(if $(word 16001,$($1)),$(error Cannot list safely more than 16000 paths. $1 has $(words $($1)) paths!))
+ $(call ListPathsSafely_If,$1,$2,1,250)
+ $(call ListPathsSafely_If,$1,$2,251,500)
+ $(call ListPathsSafely_If,$1,$2,501,750)
+ $(call ListPathsSafely_If,$1,$2,751,1000)
- $(call ListPathsSafely_If,$1,$2,1001,1250)
- $(call ListPathsSafely_If,$1,$2,1251,1500)
- $(call ListPathsSafely_If,$1,$2,1501,1750)
- $(call ListPathsSafely_If,$1,$2,1751,2000)
+ $(call ListPathsSafely_If,$1,$2,1001,1250)
+ $(call ListPathsSafely_If,$1,$2,1251,1500)
+ $(call ListPathsSafely_If,$1,$2,1501,1750)
+ $(call ListPathsSafely_If,$1,$2,1751,2000)
- $(call ListPathsSafely_If,$1,$2,2001,2250)
- $(call ListPathsSafely_If,$1,$2,2251,2500)
- $(call ListPathsSafely_If,$1,$2,2501,2750)
- $(call ListPathsSafely_If,$1,$2,2751,3000)
+ $(call ListPathsSafely_If,$1,$2,2001,2250)
+ $(call ListPathsSafely_If,$1,$2,2251,2500)
+ $(call ListPathsSafely_If,$1,$2,2501,2750)
+ $(call ListPathsSafely_If,$1,$2,2751,3000)
- $(call ListPathsSafely_If,$1,$2,3001,3250)
- $(call ListPathsSafely_If,$1,$2,3251,3500)
- $(call ListPathsSafely_If,$1,$2,3501,3750)
- $(call ListPathsSafely_If,$1,$2,3751,4000)
+ $(call ListPathsSafely_If,$1,$2,3001,3250)
+ $(call ListPathsSafely_If,$1,$2,3251,3500)
+ $(call ListPathsSafely_If,$1,$2,3501,3750)
+ $(call ListPathsSafely_If,$1,$2,3751,4000)
- $(call ListPathsSafely_If,$1,$2,4001,4250)
- $(call ListPathsSafely_If,$1,$2,4251,4500)
- $(call ListPathsSafely_If,$1,$2,4501,4750)
- $(call ListPathsSafely_If,$1,$2,4751,5000)
+ $(call ListPathsSafely_If,$1,$2,4001,4250)
+ $(call ListPathsSafely_If,$1,$2,4251,4500)
+ $(call ListPathsSafely_If,$1,$2,4501,4750)
+ $(call ListPathsSafely_If,$1,$2,4751,5000)
- $(call ListPathsSafely_If,$1,$2,5001,5250)
- $(call ListPathsSafely_If,$1,$2,5251,5500)
- $(call ListPathsSafely_If,$1,$2,5501,5750)
- $(call ListPathsSafely_If,$1,$2,5751,6000)
+ $(call ListPathsSafely_If,$1,$2,5001,5250)
+ $(call ListPathsSafely_If,$1,$2,5251,5500)
+ $(call ListPathsSafely_If,$1,$2,5501,5750)
+ $(call ListPathsSafely_If,$1,$2,5751,6000)
- $(call ListPathsSafely_If,$1,$2,6001,6250)
- $(call ListPathsSafely_If,$1,$2,6251,6500)
- $(call ListPathsSafely_If,$1,$2,6501,6750)
- $(call ListPathsSafely_If,$1,$2,6751,7000)
+ $(call ListPathsSafely_If,$1,$2,6001,6250)
+ $(call ListPathsSafely_If,$1,$2,6251,6500)
+ $(call ListPathsSafely_If,$1,$2,6501,6750)
+ $(call ListPathsSafely_If,$1,$2,6751,7000)
- $(call ListPathsSafely_If,$1,$2,7001,7250)
- $(call ListPathsSafely_If,$1,$2,7251,7500)
- $(call ListPathsSafely_If,$1,$2,7501,7750)
- $(call ListPathsSafely_If,$1,$2,7751,8000)
+ $(call ListPathsSafely_If,$1,$2,7001,7250)
+ $(call ListPathsSafely_If,$1,$2,7251,7500)
+ $(call ListPathsSafely_If,$1,$2,7501,7750)
+ $(call ListPathsSafely_If,$1,$2,7751,8000)
- $(call ListPathsSafely_If,$1,$2,8001,8250)
- $(call ListPathsSafely_If,$1,$2,8251,8500)
- $(call ListPathsSafely_If,$1,$2,8501,8750)
- $(call ListPathsSafely_If,$1,$2,8751,9000)
+ $(call ListPathsSafely_If,$1,$2,8001,8250)
+ $(call ListPathsSafely_If,$1,$2,8251,8500)
+ $(call ListPathsSafely_If,$1,$2,8501,8750)
+ $(call ListPathsSafely_If,$1,$2,8751,9000)
- $(call ListPathsSafely_If,$1,$2,9001,9250)
- $(call ListPathsSafely_If,$1,$2,9251,9500)
- $(call ListPathsSafely_If,$1,$2,9501,9750)
- $(call ListPathsSafely_If,$1,$2,9751,10000)
+ $(call ListPathsSafely_If,$1,$2,9001,9250)
+ $(call ListPathsSafely_If,$1,$2,9251,9500)
+ $(call ListPathsSafely_If,$1,$2,9501,9750)
+ $(call ListPathsSafely_If,$1,$2,9751,10000)
- $(call ListPathsSafely_If,$1,$2,10001,10250)
- $(call ListPathsSafely_If,$1,$2,10251,10500)
- $(call ListPathsSafely_If,$1,$2,10501,10750)
- $(call ListPathsSafely_If,$1,$2,10751,11000)
+ $(call ListPathsSafely_If,$1,$2,10001,10250)
+ $(call ListPathsSafely_If,$1,$2,10251,10500)
+ $(call ListPathsSafely_If,$1,$2,10501,10750)
+ $(call ListPathsSafely_If,$1,$2,10751,11000)
- $(call ListPathsSafely_If,$1,$2,11001,11250)
- $(call ListPathsSafely_If,$1,$2,11251,11500)
- $(call ListPathsSafely_If,$1,$2,11501,11750)
- $(call ListPathsSafely_If,$1,$2,11751,12000)
+ $(call ListPathsSafely_If,$1,$2,11001,11250)
+ $(call ListPathsSafely_If,$1,$2,11251,11500)
+ $(call ListPathsSafely_If,$1,$2,11501,11750)
+ $(call ListPathsSafely_If,$1,$2,11751,12000)
- $(call ListPathsSafely_If,$1,$2,12001,12250)
- $(call ListPathsSafely_If,$1,$2,12251,12500)
- $(call ListPathsSafely_If,$1,$2,12501,12750)
- $(call ListPathsSafely_If,$1,$2,12751,13000)
+ $(call ListPathsSafely_If,$1,$2,12001,12250)
+ $(call ListPathsSafely_If,$1,$2,12251,12500)
+ $(call ListPathsSafely_If,$1,$2,12501,12750)
+ $(call ListPathsSafely_If,$1,$2,12751,13000)
- $(call ListPathsSafely_If,$1,$2,13001,13250)
- $(call ListPathsSafely_If,$1,$2,13251,13500)
- $(call ListPathsSafely_If,$1,$2,13501,13750)
- $(call ListPathsSafely_If,$1,$2,13751,14000)
+ $(call ListPathsSafely_If,$1,$2,13001,13250)
+ $(call ListPathsSafely_If,$1,$2,13251,13500)
+ $(call ListPathsSafely_If,$1,$2,13501,13750)
+ $(call ListPathsSafely_If,$1,$2,13751,14000)
- $(call ListPathsSafely_If,$1,$2,14001,14250)
- $(call ListPathsSafely_If,$1,$2,14251,14500)
- $(call ListPathsSafely_If,$1,$2,14501,14750)
- $(call ListPathsSafely_If,$1,$2,14751,15000)
+ $(call ListPathsSafely_If,$1,$2,14001,14250)
+ $(call ListPathsSafely_If,$1,$2,14251,14500)
+ $(call ListPathsSafely_If,$1,$2,14501,14750)
+ $(call ListPathsSafely_If,$1,$2,14751,15000)
- $(call ListPathsSafely_If,$1,$2,15001,15250)
- $(call ListPathsSafely_If,$1,$2,15251,15500)
- $(call ListPathsSafely_If,$1,$2,15501,15750)
- $(call ListPathsSafely_If,$1,$2,15751,16000)
+ $(call ListPathsSafely_If,$1,$2,15001,15250)
+ $(call ListPathsSafely_If,$1,$2,15251,15500)
+ $(call ListPathsSafely_If,$1,$2,15501,15750)
+ $(call ListPathsSafely_If,$1,$2,15751,16000)
- $(call ListPathsSafely_Printf,$1,$2,$3,1)
- $(call ListPathsSafely_Printf,$1,$2,$3,251)
- $(call ListPathsSafely_Printf,$1,$2,$3,501)
- $(call ListPathsSafely_Printf,$1,$2,$3,751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,1)
+ $(call ListPathsSafely_Printf,$1,$2,$3,251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,751)
- $(call ListPathsSafely_Printf,$1,$2,$3,1001)
- $(call ListPathsSafely_Printf,$1,$2,$3,1251)
- $(call ListPathsSafely_Printf,$1,$2,$3,1501)
- $(call ListPathsSafely_Printf,$1,$2,$3,1751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,1001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,1251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,1501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,1751)
- $(call ListPathsSafely_Printf,$1,$2,$3,2001)
- $(call ListPathsSafely_Printf,$1,$2,$3,2251)
- $(call ListPathsSafely_Printf,$1,$2,$3,2501)
- $(call ListPathsSafely_Printf,$1,$2,$3,2751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,2001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,2251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,2501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,2751)
- $(call ListPathsSafely_Printf,$1,$2,$3,3001)
- $(call ListPathsSafely_Printf,$1,$2,$3,3251)
- $(call ListPathsSafely_Printf,$1,$2,$3,3501)
- $(call ListPathsSafely_Printf,$1,$2,$3,3751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,3001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,3251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,3501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,3751)
- $(call ListPathsSafely_Printf,$1,$2,$3,4001)
- $(call ListPathsSafely_Printf,$1,$2,$3,4251)
- $(call ListPathsSafely_Printf,$1,$2,$3,4501)
- $(call ListPathsSafely_Printf,$1,$2,$3,4751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,4001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,4251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,4501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,4751)
- $(call ListPathsSafely_Printf,$1,$2,$3,5001)
- $(call ListPathsSafely_Printf,$1,$2,$3,5251)
- $(call ListPathsSafely_Printf,$1,$2,$3,5501)
- $(call ListPathsSafely_Printf,$1,$2,$3,5751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,5001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,5251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,5501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,5751)
- $(call ListPathsSafely_Printf,$1,$2,$3,6001)
- $(call ListPathsSafely_Printf,$1,$2,$3,6251)
- $(call ListPathsSafely_Printf,$1,$2,$3,6501)
- $(call ListPathsSafely_Printf,$1,$2,$3,6751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,6001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,6251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,6501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,6751)
- $(call ListPathsSafely_Printf,$1,$2,$3,7001)
- $(call ListPathsSafely_Printf,$1,$2,$3,7251)
- $(call ListPathsSafely_Printf,$1,$2,$3,7501)
- $(call ListPathsSafely_Printf,$1,$2,$3,7751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,7001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,7251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,7501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,7751)
- $(call ListPathsSafely_Printf,$1,$2,$3,8001)
- $(call ListPathsSafely_Printf,$1,$2,$3,8251)
- $(call ListPathsSafely_Printf,$1,$2,$3,8501)
- $(call ListPathsSafely_Printf,$1,$2,$3,8751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,8001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,8251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,8501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,8751)
- $(call ListPathsSafely_Printf,$1,$2,$3,9001)
- $(call ListPathsSafely_Printf,$1,$2,$3,9251)
- $(call ListPathsSafely_Printf,$1,$2,$3,9501)
- $(call ListPathsSafely_Printf,$1,$2,$3,9751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,9001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,9251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,9501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,9751)
- $(call ListPathsSafely_Printf,$1,$2,$3,10001)
- $(call ListPathsSafely_Printf,$1,$2,$3,10251)
- $(call ListPathsSafely_Printf,$1,$2,$3,10501)
- $(call ListPathsSafely_Printf,$1,$2,$3,10751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,10001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,10251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,10501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,10751)
- $(call ListPathsSafely_Printf,$1,$2,$3,11001)
- $(call ListPathsSafely_Printf,$1,$2,$3,11251)
- $(call ListPathsSafely_Printf,$1,$2,$3,11501)
- $(call ListPathsSafely_Printf,$1,$2,$3,11751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,11001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,11251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,11501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,11751)
- $(call ListPathsSafely_Printf,$1,$2,$3,12001)
- $(call ListPathsSafely_Printf,$1,$2,$3,12251)
- $(call ListPathsSafely_Printf,$1,$2,$3,12501)
- $(call ListPathsSafely_Printf,$1,$2,$3,12751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,12001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,12251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,12501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,12751)
- $(call ListPathsSafely_Printf,$1,$2,$3,13001)
- $(call ListPathsSafely_Printf,$1,$2,$3,13251)
- $(call ListPathsSafely_Printf,$1,$2,$3,13501)
- $(call ListPathsSafely_Printf,$1,$2,$3,13751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,13001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,13251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,13501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,13751)
- $(call ListPathsSafely_Printf,$1,$2,$3,14001)
- $(call ListPathsSafely_Printf,$1,$2,$3,14251)
- $(call ListPathsSafely_Printf,$1,$2,$3,14501)
- $(call ListPathsSafely_Printf,$1,$2,$3,14751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,14001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,14251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,14501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,14751)
- $(call ListPathsSafely_Printf,$1,$2,$3,15001)
- $(call ListPathsSafely_Printf,$1,$2,$3,15251)
- $(call ListPathsSafely_Printf,$1,$2,$3,15501)
- $(call ListPathsSafely_Printf,$1,$2,$3,15751)
+ $(call ListPathsSafely_Printf,$1,$2,$3,15001)
+ $(call ListPathsSafely_Printf,$1,$2,$3,15251)
+ $(call ListPathsSafely_Printf,$1,$2,$3,15501)
+ $(call ListPathsSafely_Printf,$1,$2,$3,15751)
endef
define ListPathsSafelyNow_IfPrintf
- ifneq (,$$(word $4,$$($1)))
- $$(eval $1_LPS$4:=$$(call compress_paths,$$(wordlist $4,$5,$$($1))))
- $$(shell printf -- "$$(strip $$($1_LPS$4))\n" | $(decompress_paths) $3)
- endif
+ ifneq (,$$(word $4,$$($1)))
+ $$(eval $1_LPS$4:=$$(call compress_paths,$$(wordlist $4,$5,$$($1))))
+ $$(shell printf -- "$$(strip $$($1_LPS$4))\n" | $(decompress_paths) $3)
+ endif
endef
# And an non-receipt version:
define ListPathsSafelyNow
- ifneq (,$$(word 10001,$$($1)))
- $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
- endif
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1,250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,251,500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,501,750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,751,1000)
+ ifneq (,$$(word 10001,$$($1)))
+ $$(error Cannot list safely more than 10000 paths. $1 has $$(words $$($1)) paths!)
+ endif
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1,250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,251,500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,501,750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,751,1000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1001,1250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1251,1500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1501,1750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1751,2000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1001,1250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1251,1500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1501,1750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,1751,2000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2001,2250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2251,2500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2501,2750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2751,3000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2001,2250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2251,2500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2501,2750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,2751,3000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3001,3250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3251,3500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3501,3750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3751,4000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3001,3250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3251,3500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3501,3750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,3751,4000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4001,4250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4251,4500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4501,4750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4751,5000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4001,4250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4251,4500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4501,4750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,4751,5000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5001,5250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5251,5500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5501,5750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5751,6000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5001,5250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5251,5500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5501,5750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,5751,6000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6001,6250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6251,6500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6501,6750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6751,7000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6001,6250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6251,6500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6501,6750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,6751,7000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7001,7250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7251,7500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7501,7750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7751,8000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7001,7250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7251,7500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7501,7750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,7751,8000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8001,8250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8251,8500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8501,8750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8751,9000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8001,8250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8251,8500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8501,8750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,8751,9000)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9001,9250)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9251,9500)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9501,9750)
- $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9751,10000)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9001,9250)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9251,9500)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9501,9750)
+ $(call ListPathsSafelyNow_IfPrintf,$1,$2,$3,9751,10000)
endef
# The source tips can come from the Mercurial repository, or in the files
-# $(HGTIP_FILENAME) which contains the tip but is also positioned in the same
-# directory as the original $(HGDIR) directory.
-# These should not be := assignments, only used from the root Makefile.
+# $(HGTIP_FILENAME) which contains the tip but is also positioned in the same
+# directory as the original $(HGDIR) directory.
+# These should not be := assignments, only used from the root Makefile.
HG_VERSION = $(shell $(HG) version 2> /dev/null)
HG_DIRECTORY=.hg
HGTIP_FILENAME=.hgtip
HG_SEARCH = ./REPO ./*/REPO ./*/*/REPO ./*/*/*/REPO
REPO_LIST = $(patsubst ./%,%,$(patsubst %/,%,$(sort $(dir \
$(shell $(CD) $(SRC_ROOT) ; ( $(LS) -d $(HG_SEARCH:%/REPO=%/$(HG_DIRECTORY)) ; \
- $(LS) $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) ) \
- 2> /dev/null)))))
+ $(LS) $(HG_SEARCH:%/REPO=%/$(HGTIP_FILENAME)) ) \
+ 2> /dev/null)))))
# Emit the repo:tip pairs to $@
define GetSourceTips
-$(CD) $(SRC_ROOT) ; \
-for i in $(REPO_LIST) IGNORE ; do \
- if [ "$${i}" = "IGNORE" ] ; then \
- continue; \
- elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \
- $(PRINTF) " %s:%s" \
- "$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \
- elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \
- $(PRINTF) " %s:%s" \
- "$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \
- fi; \
-done >> $@
-$(PRINTF) "\n" >> $@
+ $(CD) $(SRC_ROOT) ; \
+ for i in $(REPO_LIST) IGNORE ; do \
+ if [ "$${i}" = "IGNORE" ] ; then \
+ continue; \
+ elif [ -d $${i}/$(HG_DIRECTORY) -a "$(HG_VERSION)" != "" ] ; then \
+ $(PRINTF) " %s:%s" \
+ "$${i}" `$(HG) tip --repository $${i} --template '{node|short}\n'` ; \
+ elif [ -f $${i}/$(HGTIP_FILENAME) ] ; then \
+ $(PRINTF) " %s:%s" \
+ "$${i}" `$(CAT) $${i}/$(HGTIP_FILENAME)` ; \
+ fi; \
+ done >> $@
+ $(PRINTF) "\n" >> $@
endef
# Create the HGTIP_FILENAME file. Called from jdk/make/closed/bundles.gmk
define CreateHgTip
-$(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME);\
-$(ECHO) $1/$(HGTIP_FILENAME)
+ $(HG) tip --repository $1 --template '{node|short}\n' > $1/$(HGTIP_FILENAME); \
+ $(ECHO) $1/$(HGTIP_FILENAME)
endef
define SetupLogging
- ifeq ($$(LOG_LEVEL),trace)
- # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
- # For each target executed, will print
- # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
- # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
- # (and causing a crash on Cygwin).
- # Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
- # Only use time if it's GNU time which supports format and output file.
- WRAPPER_SHELL:=/bin/bash $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log /bin/bash
- SHELL=$$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
- endif
- # Never remove warning messages; this is just for completeness
- LOG_WARN=
- ifneq ($$(findstring $$(LOG_LEVEL),info debug trace),)
- LOG_INFO=
- else
- LOG_INFO=> /dev/null
- endif
- ifneq ($$(findstring $$(LOG_LEVEL),debug trace),)
- LOG_DEBUG=
- else
- LOG_DEBUG=> /dev/null
- endif
- ifneq ($$(findstring $$(LOG_LEVEL),trace),)
- LOG_TRACE=
- else
- LOG_TRACE=> /dev/null
- endif
+ ifeq ($$(LOG_LEVEL),trace)
+ # Shell redefinition trick inspired by http://www.cmcrossroads.com/ask-mr-make/6535-tracing-rule-execution-in-gnu-make
+ # For each target executed, will print
+ # Building <TARGET> (from <FIRST PREREQUISITE>) (<ALL NEWER PREREQUISITES> newer)
+ # but with a limit of 20 on <ALL NEWER PREREQUISITES>, to avoid cluttering logs too much
+ # (and causing a crash on Cygwin).
+ # Default shell seems to always be /bin/sh. Must override with bash to get this to work on Solaris.
+ # Only use time if it's GNU time which supports format and output file.
+ WRAPPER_SHELL:=/bin/bash $$(SRC_ROOT)/common/bin/shell-tracer.sh $$(if $$(findstring yes,$$(IS_GNU_TIME)),$$(TIME),-) $$(OUTPUT_ROOT)/build-trace-time.log /bin/bash
+ SHELL=$$(warning $$(if $$@,Building $$@,Running shell command) $$(if $$<, (from $$<))$$(if $$?, ($$(wordlist 1, 20, $$?) $$(if $$(wordlist 21, 22, $$?), ... [in total $$(words $$?) files]) newer)))$$(WRAPPER_SHELL)
+ endif
+ # Never remove warning messages; this is just for completeness
+ LOG_WARN=
+ ifneq ($$(findstring $$(LOG_LEVEL),info debug trace),)
+ LOG_INFO=
+ else
+ LOG_INFO=> /dev/null
+ endif
+ ifneq ($$(findstring $$(LOG_LEVEL),debug trace),)
+ LOG_DEBUG=
+ else
+ LOG_DEBUG=> /dev/null
+ endif
+ ifneq ($$(findstring $$(LOG_LEVEL),trace),)
+ LOG_TRACE=
+ else
+ LOG_TRACE=> /dev/null
+ endif
endef
# Make sure logging is setup for everyone that includes MakeBase.gmk.
@@ -363,43 +363,43 @@
# This is to be called by all SetupFoo macros
define LogSetupMacroEntry
- $(if $(27),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
- $(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
+ $(if $(27),$(error Internal makefile error: Too many arguments to LogSetupMacroEntry, please update MakeBase.gmk))
+ $(if $(findstring $(LOG_LEVEL),debug trace), $(info $1 $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26,$(if $($i),$(NEWLINE) $(strip [$i] $($i))))))
endef
# Make directory without forking mkdir if not needed
define MakeDir
- ifneq ($$(wildcard $1 $2 $3 $4 $5 $6 $7 $8 $9),$$(strip $1 $2 $3 $4 $5 $6 $7 $8 $9))
- $$(shell $(MKDIR) -p $1 $2 $3 $4 $5 $6 $7 $8 $9)
- endif
+ ifneq ($$(wildcard $1 $2 $3 $4 $5 $6 $7 $8 $9),$$(strip $1 $2 $3 $4 $5 $6 $7 $8 $9))
+ $$(shell $(MKDIR) -p $1 $2 $3 $4 $5 $6 $7 $8 $9)
+ endif
endef
ifeq ($(OPENJDK_TARGET_OS),solaris)
-# On Solaris, if the target is a symlink and exists, cp won't overwrite.
-# Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the
-# name of the target file differs from the source file, rename after copy.
-define install-file
+ # On Solaris, if the target is a symlink and exists, cp won't overwrite.
+ # Cp has to operate in recursive mode to allow for -P flag, to preserve soft links. If the
+ # name of the target file differs from the source file, rename after copy.
+ define install-file
$(MKDIR) -p $(@D)
$(RM) '$@'
$(CP) -f -r -P '$<' '$(@D)'
if [ "$(@F)" != "$(<F)" ]; then $(MV) '$(@D)/$(<F)' '$@'; fi
-endef
+ endef
else ifeq ($(OPENJDK_TARGET_OS),macosx)
-# On mac, extended attributes sometimes creep into the source files, which may later
-# cause the creation of ._* files which confuses testing. Clear these with xattr if
-# set. Some files get their write permissions removed after being copied to the
-# output dir. When these are copied again to images, xattr would fail. By only clearing
-# attributes when they are present, failing on this is avoided.
-define install-file
+ # On mac, extended attributes sometimes creep into the source files, which may later
+ # cause the creation of ._* files which confuses testing. Clear these with xattr if
+ # set. Some files get their write permissions removed after being copied to the
+ # output dir. When these are copied again to images, xattr would fail. By only clearing
+ # attributes when they are present, failing on this is avoided.
+ define install-file
$(MKDIR) -p $(@D)
$(CP) -fRP '$<' '$@'
if [ -n "`$(XATTR) -l '$@'`" ]; then $(XATTR) -c '$@'; fi
-endef
+ endef
else
-define install-file
+ define install-file
$(MKDIR) -p $(@D)
$(CP) -fP '$<' '$@'
-endef
+ endef
endif
# Convenience functions for working around make's limitations with $(filter ).
@@ -409,25 +409,25 @@
################################################################################
# In Cygwin, finds are very costly, both because of expensive forks and because
# of bad file system caching. Find is used extensively in $(shell) commands to
-# find source files. This makes rerunning make with no or few changes rather
+# find source files. This makes rerunning make with no or few changes rather
# expensive. To speed this up, these two macros are used to cache the results
# of simple find commands for reuse.
-#
+#
# Runs a find and stores both the directories where it was run and the results.
# This macro can be called multiple times to add to the cache. Only finds files
# with no filters.
#
# Needs to be called with $(eval )
-#
+#
# Param 1 - Dir to find in
ifeq ($(OPENJDK_BUILD_OS),windows)
-define FillCacheFind
+ define FillCacheFind
FIND_CACHE_DIR += $1
FIND_CACHE := $$(sort $$(FIND_CACHE) $$(shell $(FIND) $1 -type f -o -type l))
-endef
+ endef
else
-define FillCacheFind
-endef
+ define FillCacheFind
+ endef
endif
# Mimics find by looking in the cache if all of the directories have been cached.
@@ -437,9 +437,9 @@
# The extra - is needed when FIND_CACHE_DIR is empty but should be harmless.
# Param 1 - Dirs to find in
define CacheFind
- $(if $(filter-out $(addsuffix %,- $(FIND_CACHE_DIR)),$1),\
- $(shell $(FIND) $1 -type f -o -type l),\
- $(filter $(addsuffix %,$1),$(FIND_CACHE)))
+ $(if $(filter-out $(addsuffix %,- $(FIND_CACHE_DIR)),$1), \
+ $(shell $(FIND) $1 -type f -o -type l), \
+ $(filter $(addsuffix %,$1),$(FIND_CACHE)))
endef
################################################################################
--- a/common/makefiles/MakeHelpers.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/MakeHelpers.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -26,7 +26,7 @@
################################################################
#
# This file contains helper functions for the top-level Makefile that does
-# not depend on the spec.gmk file having been read. (The purpose of this
+# not depend on the spec.gmk file having been read. (The purpose of this
# file is ju to avoid cluttering the top-level Makefile.)
#
################################################################
@@ -49,7 +49,7 @@
BUILDTIMESDIR=$(OUTPUT_ROOT)/tmp/buildtimes
# Global targets are possible to run either with or without a SPEC. The prototypical
-# global target is "help".
+# global target is "help".
global_targets=help jprt% bridgeBuild
##############################
@@ -57,55 +57,55 @@
##############################
define CheckEnvironment
- # Find all environment or command line variables that begin with ALT.
- $(if $(list_alt_overrides),
- @$(PRINTF) "\nWARNING: You have the following ALT_ variables set:\n"
- @$(PRINTF) "$(foreach var,$(list_alt_overrides),$(var)=$$$(var))\n"
- @$(PRINTF) "ALT_ variables are deprecated and will be ignored. Please clean your environment.\n\n"
- )
+ # Find all environment or command line variables that begin with ALT.
+ $(if $(list_alt_overrides),
+ @$(PRINTF) "\nWARNING: You have the following ALT_ variables set:\n"
+ @$(PRINTF) "$(foreach var,$(list_alt_overrides),$(var)=$$$(var))\n"
+ @$(PRINTF) "ALT_ variables are deprecated and will be ignored. Please clean your environment.\n\n"
+ )
endef
### Functions for timers
# Record starting time for build of a sub repository.
define RecordStartTime
- $(MKDIR) -p $(BUILDTIMESDIR)
- $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1
- $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable
+ $(MKDIR) -p $(BUILDTIMESDIR)
+ $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_start_$1
+ $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_start_$1_human_readable
endef
# Record ending time and calculate the difference and store it in a
# easy to read format. Handles builds that cross midnight. Expects
-# that a build will never take 24 hours or more.
+# that a build will never take 24 hours or more.
define RecordEndTime
- $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1
- $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable
- $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \
- $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
- M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
- > $(BUILDTIMESDIR)/build_time_diff_$1
+ $(DATE) '+%Y %m %d %H %M %S' | $(NAWK) '{ print $$1,$$2,$$3,$$4,$$5,$$6,($$4*3600+$$5*60+$$6) }' > $(BUILDTIMESDIR)/build_time_end_$1
+ $(DATE) '+%Y-%m-%d %H:%M:%S' > $(BUILDTIMESDIR)/build_time_end_$1_human_readable
+ $(ECHO) `$(CAT) $(BUILDTIMESDIR)/build_time_start_$1` `$(CAT) $(BUILDTIMESDIR)/build_time_end_$1` $1 | \
+ $(NAWK) '{ F=$$7; T=$$14; if (F > T) { T+=3600*24 }; D=T-F; H=int(D/3600); \
+ M=int((D-H*3600)/60); S=D-H*3600-M*60; printf("%02d:%02d:%02d %s\n",H,M,S,$$15); }' \
+ > $(BUILDTIMESDIR)/build_time_diff_$1
endef
# Find all build_time_* files and print their contents in a list sorted
# on the name of the sub repository.
define ReportBuildTimes
- $(BUILD_LOG_WRAPPER) $(PRINTF) -- "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
- "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
+ $(BUILD_LOG_WRAPPER) $(PRINTF) -- "----- Build times -------\nStart %s\nEnd %s\n%s\n%s\n-------------------------\n" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_start_TOTAL_human_readable`" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_end_TOTAL_human_readable`" \
+ "`$(LS) $(BUILDTIMESDIR)/build_time_diff_* | $(GREP) -v _TOTAL | $(XARGS) $(CAT) | $(SORT) -k 2`" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_TOTAL`"
endef
define ResetAllTimers
- $$(shell $(MKDIR) -p $(BUILDTIMESDIR) && $(RM) $(BUILDTIMESDIR)/build_time_*)
+ $$(shell $(MKDIR) -p $(BUILDTIMESDIR) && $(RM) $(BUILDTIMESDIR)/build_time_*)
endef
define StartGlobalTimer
- $(call RecordStartTime,TOTAL)
+ $(call RecordStartTime,TOTAL)
endef
define StopGlobalTimer
- $(call RecordEndTime,TOTAL)
+ $(call RecordEndTime,TOTAL)
endef
### Functions for managing makefile structure (start/end of makefile and individual targets)
@@ -123,184 +123,184 @@
# Check if the current target is the final target, as specified by
# the user on the command line. If so, call AtRootMakeEnd.
define CheckIfMakeAtEnd
- # Check if the current target is the last goal
- $(if $(filter $@,$(call LastGoal)),$(call AtMakeEnd))
- # If the target is 'foo-only', check if our goal was stated as 'foo'
- $(if $(filter $@,$(call LastGoal)-only),$(call AtMakeEnd))
+ # Check if the current target is the last goal
+ $(if $(filter $@,$(call LastGoal)),$(call AtMakeEnd))
+ # If the target is 'foo-only', check if our goal was stated as 'foo'
+ $(if $(filter $@,$(call LastGoal)-only),$(call AtMakeEnd))
endef
# Hook to be called when starting to execute a top-level target
define TargetEnter
- $(BUILD_LOG_WRAPPER) $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"
- $(call RecordStartTime,$(patsubst %-only,%,$@))
+ $(BUILD_LOG_WRAPPER) $(PRINTF) "## Starting $(patsubst %-only,%,$@)\n"
+ $(call RecordStartTime,$(patsubst %-only,%,$@))
endef
# Hook to be called when finish executing a top-level target
define TargetExit
- $(call RecordEndTime,$(patsubst %-only,%,$@))
- $(BUILD_LOG_WRAPPER) $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \
- "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"
- $(call CheckIfMakeAtEnd)
+ $(call RecordEndTime,$(patsubst %-only,%,$@))
+ $(BUILD_LOG_WRAPPER) $(PRINTF) "## Finished $(patsubst %-only,%,$@) (build time %s)\n\n" \
+ "`$(CAT) $(BUILDTIMESDIR)/build_time_diff_$(patsubst %-only,%,$@) | $(CUT) -f 1 -d ' '`"
+ $(call CheckIfMakeAtEnd)
endef
# Hook to be called as the very first thing when running a normal build
define AtMakeStart
- $(if $(findstring --jobserver,$(MAKEFLAGS)),$(error make -j is not supported, use make JOBS=n))
- $(call CheckEnvironment)
- @$(PRINTF) $(LOG_INFO) "Running make as '$(MAKE) $(MFLAGS) $(MAKE_ARGS)'\n"
- @$(PRINTF) "Building $(PRODUCT_NAME) for target '$(call GetRealTarget)' in configuration '$(CONF_NAME)'\n\n"
- $(call StartGlobalTimer)
+ $(if $(findstring --jobserver,$(MAKEFLAGS)),$(error make -j is not supported, use make JOBS=n))
+ $(call CheckEnvironment)
+ @$(PRINTF) $(LOG_INFO) "Running make as '$(MAKE) $(MFLAGS) $(MAKE_ARGS)'\n"
+ @$(PRINTF) "Building $(PRODUCT_NAME) for target '$(call GetRealTarget)' in configuration '$(CONF_NAME)'\n\n"
+ $(call StartGlobalTimer)
endef
# Hook to be called as the very last thing for targets that are "top level" targets
define AtMakeEnd
- [ -f $(SJAVAC_SERVER_DIR)/server.port ] && echo Stopping sjavac server && $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true
- $(call StopGlobalTimer)
- $(call ReportBuildTimes)
- @$(PRINTF) "Finished building $(PRODUCT_NAME) for target '$(call GetRealTarget)'\n"
- $(call CheckEnvironment)
+ [ -f $(SJAVAC_SERVER_DIR)/server.port ] && echo Stopping sjavac server && $(TOUCH) $(SJAVAC_SERVER_DIR)/server.port.stop; true
+ $(call StopGlobalTimer)
+ $(call ReportBuildTimes)
+ @$(PRINTF) "Finished building $(PRODUCT_NAME) for target '$(call GetRealTarget)'\n"
+ $(call CheckEnvironment)
endef
### Functions for parsing and setting up make options from command-line
define FatalError
- # If the user specificed a "global" target (e.g. 'help'), do not exit but continue running
- $$(if $$(filter-out $(global_targets),$$(call GetRealTarget)),$$(error Cannot continue))
+ # If the user specificed a "global" target (e.g. 'help'), do not exit but continue running
+ $$(if $$(filter-out $(global_targets),$$(call GetRealTarget)),$$(error Cannot continue))
endef
define ParseLogLevel
- ifeq ($$(origin VERBOSE),undefined)
- # Setup logging according to LOG (but only if VERBOSE is not given)
+ ifeq ($$(origin VERBOSE),undefined)
+ # Setup logging according to LOG (but only if VERBOSE is not given)
- # If the "nofile" argument is given, act on it and strip it away
- ifneq ($$(findstring nofile,$$(LOG)),)
- # Reset the build log wrapper, regardless of other values
- override BUILD_LOG_WRAPPER=
- # COMMA is defined in spec.gmk, but that is not included yet
- COMMA=,
- # First try to remove ",nofile" if it exists
- LOG_STRIPPED1=$$(subst $$(COMMA)nofile,,$$(LOG))
- # Otherwise just remove "nofile"
- LOG_STRIPPED2=$$(subst nofile,,$$(LOG_STRIPPED1))
- # We might have ended up with a leading comma. Remove it
- LOG_STRIPPED3=$$(strip $$(patsubst $$(COMMA)%,%,$$(LOG_STRIPPED2)))
- LOG_LEVEL:=$$(LOG_STRIPPED3)
- else
- LOG_LEVEL:=$$(LOG)
- endif
+ # If the "nofile" argument is given, act on it and strip it away
+ ifneq ($$(findstring nofile,$$(LOG)),)
+ # Reset the build log wrapper, regardless of other values
+ override BUILD_LOG_WRAPPER=
+ # COMMA is defined in spec.gmk, but that is not included yet
+ COMMA=,
+ # First try to remove ",nofile" if it exists
+ LOG_STRIPPED1=$$(subst $$(COMMA)nofile,,$$(LOG))
+ # Otherwise just remove "nofile"
+ LOG_STRIPPED2=$$(subst nofile,,$$(LOG_STRIPPED1))
+ # We might have ended up with a leading comma. Remove it
+ LOG_STRIPPED3=$$(strip $$(patsubst $$(COMMA)%,%,$$(LOG_STRIPPED2)))
+ LOG_LEVEL:=$$(LOG_STRIPPED3)
+ else
+ LOG_LEVEL:=$$(LOG)
+ endif
- ifeq ($$(LOG_LEVEL),)
- # Set LOG to "warn" as default if not set (and no VERBOSE given)
- override LOG_LEVEL=warn
- endif
- ifeq ($$(LOG_LEVEL),warn)
- VERBOSE=-s
- else ifeq ($$(LOG_LEVEL),info)
- VERBOSE=-s
- else ifeq ($$(LOG_LEVEL),debug)
- VERBOSE=
- else ifeq ($$(LOG_LEVEL),trace)
- VERBOSE=
- else
- $$(info Error: LOG must be one of: warn, info, debug or trace.)
- $$(eval $$(call FatalError))
- endif
+ ifeq ($$(LOG_LEVEL),)
+ # Set LOG to "warn" as default if not set (and no VERBOSE given)
+ override LOG_LEVEL=warn
+ endif
+ ifeq ($$(LOG_LEVEL),warn)
+ VERBOSE=-s
+ else ifeq ($$(LOG_LEVEL),info)
+ VERBOSE=-s
+ else ifeq ($$(LOG_LEVEL),debug)
+ VERBOSE=
+ else ifeq ($$(LOG_LEVEL),trace)
+ VERBOSE=
else
- # Provide resonable interpretations of LOG_LEVEL if VERBOSE is given.
- ifeq ($(VERBOSE),)
- LOG_LEVEL:=debug
- else
- LOG_LEVEL:=warn
- endif
- ifneq ($$(LOG),)
- # We have both a VERBOSE and a LOG argument. This is OK only if this is a repeated call by ourselves,
- # but complain if this is the top-level make call.
- ifeq ($$(MAKELEVEL),0)
- $$(info Cannot use LOG=$$(LOG) and VERBOSE=$$(VERBOSE) at the same time. Choose one.)
- $$(eval $$(call FatalError))
- endif
- endif
+ $$(info Error: LOG must be one of: warn, info, debug or trace.)
+ $$(eval $$(call FatalError))
+ endif
+ else
+ # Provide resonable interpretations of LOG_LEVEL if VERBOSE is given.
+ ifeq ($(VERBOSE),)
+ LOG_LEVEL:=debug
+ else
+ LOG_LEVEL:=warn
endif
+ ifneq ($$(LOG),)
+ # We have both a VERBOSE and a LOG argument. This is OK only if this is a repeated call by ourselves,
+ # but complain if this is the top-level make call.
+ ifeq ($$(MAKELEVEL),0)
+ $$(info Cannot use LOG=$$(LOG) and VERBOSE=$$(VERBOSE) at the same time. Choose one.)
+ $$(eval $$(call FatalError))
+ endif
+ endif
+ endif
endef
define ParseConfAndSpec
- ifneq ($$(filter-out $(global_targets),$$(call GetRealTarget)),)
- # If we only have global targets, no need to bother with SPEC or CONF
- ifneq ($$(origin SPEC),undefined)
- # We have been given a SPEC, check that it works out properly
- ifeq ($$(wildcard $$(SPEC)),)
- $$(info Cannot locate spec.gmk, given by SPEC=$$(SPEC))
- $$(eval $$(call FatalError))
- endif
- ifneq ($$(origin CONF),undefined)
- # We also have a CONF argument. This is OK only if this is a repeated call by ourselves,
- # but complain if this is the top-level make call.
- ifeq ($$(MAKELEVEL),0)
- $$(info Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)
- $$(eval $$(call FatalError))
- endif
- endif
- # ... OK, we're satisfied, we'll use this SPEC later on
- else
- # Find all spec.gmk files in the build output directory
- output_dir=$$(root_dir)/build
- all_spec_files=$$(wildcard $$(output_dir)/*/spec.gmk)
- ifeq ($$(all_spec_files),)
- $$(info No configurations found for $$(root_dir)! Please run configure to create a configuration.)
- $$(eval $$(call FatalError))
- endif
- # Extract the configuration names from the path
- all_confs=$$(patsubst %/spec.gmk,%,$$(patsubst $$(output_dir)/%,%,$$(all_spec_files)))
+ ifneq ($$(filter-out $(global_targets),$$(call GetRealTarget)),)
+ # If we only have global targets, no need to bother with SPEC or CONF
+ ifneq ($$(origin SPEC),undefined)
+ # We have been given a SPEC, check that it works out properly
+ ifeq ($$(wildcard $$(SPEC)),)
+ $$(info Cannot locate spec.gmk, given by SPEC=$$(SPEC))
+ $$(eval $$(call FatalError))
+ endif
+ ifneq ($$(origin CONF),undefined)
+ # We also have a CONF argument. This is OK only if this is a repeated call by ourselves,
+ # but complain if this is the top-level make call.
+ ifeq ($$(MAKELEVEL),0)
+ $$(info Cannot use CONF=$$(CONF) and SPEC=$$(SPEC) at the same time. Choose one.)
+ $$(eval $$(call FatalError))
+ endif
+ endif
+ # ... OK, we're satisfied, we'll use this SPEC later on
+ else
+ # Find all spec.gmk files in the build output directory
+ output_dir=$$(root_dir)/build
+ all_spec_files=$$(wildcard $$(output_dir)/*/spec.gmk)
+ ifeq ($$(all_spec_files),)
+ $$(info No configurations found for $$(root_dir)! Please run configure to create a configuration.)
+ $$(eval $$(call FatalError))
+ endif
+ # Extract the configuration names from the path
+ all_confs=$$(patsubst %/spec.gmk,%,$$(patsubst $$(output_dir)/%,%,$$(all_spec_files)))
- ifneq ($$(origin CONF),undefined)
- # User have given a CONF= argument.
- ifeq ($$(CONF),)
- # If given CONF=, match all configurations
- matching_confs=$$(strip $$(all_confs))
- else
- # Otherwise select those that contain the given CONF string
- matching_confs=$$(strip $$(foreach var,$$(all_confs),$$(if $$(findstring $$(CONF),$$(var)),$$(var))))
- endif
- ifeq ($$(matching_confs),)
- $$(info No configurations found matching CONF=$$(CONF))
- $$(info Available configurations:)
- $$(foreach var,$$(all_confs),$$(info * $$(var)))
- $$(eval $$(call FatalError))
- else
- ifeq ($$(words $$(matching_confs)),1)
- $$(info Building '$$(matching_confs)' (matching CONF=$$(CONF)))
- else
- $$(info Building target '$(call GetRealTarget)' in the following configurations (matching CONF=$$(CONF)):)
- $$(foreach var,$$(matching_confs),$$(info * $$(var)))
- endif
- endif
+ ifneq ($$(origin CONF),undefined)
+ # User have given a CONF= argument.
+ ifeq ($$(CONF),)
+ # If given CONF=, match all configurations
+ matching_confs=$$(strip $$(all_confs))
+ else
+ # Otherwise select those that contain the given CONF string
+ matching_confs=$$(strip $$(foreach var,$$(all_confs),$$(if $$(findstring $$(CONF),$$(var)),$$(var))))
+ endif
+ ifeq ($$(matching_confs),)
+ $$(info No configurations found matching CONF=$$(CONF))
+ $$(info Available configurations:)
+ $$(foreach var,$$(all_confs),$$(info * $$(var)))
+ $$(eval $$(call FatalError))
+ else
+ ifeq ($$(words $$(matching_confs)),1)
+ $$(info Building '$$(matching_confs)' (matching CONF=$$(CONF)))
+ else
+ $$(info Building target '$(call GetRealTarget)' in the following configurations (matching CONF=$$(CONF)):)
+ $$(foreach var,$$(matching_confs),$$(info * $$(var)))
+ endif
+ endif
- # Create a SPEC definition. This will contain the path to one or more spec.gmk files.
- SPEC=$$(addsuffix /spec.gmk,$$(addprefix $$(output_dir)/,$$(matching_confs)))
- else
- # No CONF or SPEC given, check the available configurations
- ifneq ($$(words $$(all_spec_files)),1)
- $$(info No CONF given, but more than one configuration found in $$(output_dir).)
- $$(info Available configurations:)
- $$(foreach var,$$(all_confs),$$(info * $$(var)))
- $$(info Please retry building with CONF=<config pattern> (or SPEC=<specfile>))
- $$(eval $$(call FatalError))
- endif
+ # Create a SPEC definition. This will contain the path to one or more spec.gmk files.
+ SPEC=$$(addsuffix /spec.gmk,$$(addprefix $$(output_dir)/,$$(matching_confs)))
+ else
+ # No CONF or SPEC given, check the available configurations
+ ifneq ($$(words $$(all_spec_files)),1)
+ $$(info No CONF given, but more than one configuration found in $$(output_dir).)
+ $$(info Available configurations:)
+ $$(foreach var,$$(all_confs),$$(info * $$(var)))
+ $$(info Please retry building with CONF=<config pattern> (or SPEC=<specfile>))
+ $$(eval $$(call FatalError))
+ endif
- # We found exactly one configuration, use it
- SPEC=$$(strip $$(all_spec_files))
- endif
- endif
+ # We found exactly one configuration, use it
+ SPEC=$$(strip $$(all_spec_files))
+ endif
endif
+ endif
endef
### Convenience functions from Main.gmk
# Cleans the component given as $1
define CleanComponent
- @$(PRINTF) "Cleaning $1 build artifacts ..."
- @($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)
- @$(PRINTF) " done\n"
+ @$(PRINTF) "Cleaning $1 build artifacts ..."
+ @($(CD) $(OUTPUT_ROOT) && $(RM) -r $1)
+ @$(PRINTF) " done\n"
endef
endif # _MAKEHELPERS_GMK
--- a/common/makefiles/NativeCompilation.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/NativeCompilation.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -27,556 +27,556 @@
# of removing duplicates. It is actually this side effect that is
# desired whenever sort is used below!
-ifeq (,$(_MAKEBASE_GMK))
- $(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)
+ifeq (,$(_MAKEBASE_GMK))
+ $(error You must include MakeBase.gmk prior to including NativeCompilation.gmk)
endif
ifeq ($(COMPILER_TYPE),CC)
- COMPILING_MSG=echo $(LOG_INFO) "Compiling $(notdir $1) (for $(notdir $2))"
- LINKING_MSG=echo $(LOG_INFO) "Linking $1"
- LINKING_EXE_MSG=echo $(LOG_INFO) "Linking executable $1"
- ARCHIVING_MSG=echo $(LOG_INFO) "Archiving $1"
+ COMPILING_MSG=echo $(LOG_INFO) "Compiling $(notdir $1) (for $(notdir $2))"
+ LINKING_MSG=echo $(LOG_INFO) "Linking $1"
+ LINKING_EXE_MSG=echo $(LOG_INFO) "Linking executable $1"
+ ARCHIVING_MSG=echo $(LOG_INFO) "Archiving $1"
else
- COMPILING_MSG=
- LINKING_MSG=
- LINKING_EXE_MSG=
- ARCHIVING_MSG=
+ COMPILING_MSG=
+ LINKING_MSG=
+ LINKING_EXE_MSG=
+ ARCHIVING_MSG=
endif
define add_native_source
- # param 1 = BUILD_MYPACKAGE
- # parma 2 = the source file name (..../alfa.c or .../beta.cpp)
- # param 3 = the bin dir that stores all .o (.obj) and .d files.
- # param 4 = the c flags to the compiler
- # param 5 = the c compiler
- # param 6 = the c++ flags to the compiler
- # param 7 = the c++ compiler
- # param 8 = the flags to the assembler
+ # param 1 = BUILD_MYPACKAGE
+ # parma 2 = the source file name (..../alfa.c or .../beta.cpp)
+ # param 3 = the bin dir that stores all .o (.obj) and .d files.
+ # param 4 = the c flags to the compiler
+ # param 5 = the c compiler
+ # param 6 = the c++ flags to the compiler
+ # param 7 = the c++ compiler
+ # param 8 = the flags to the assembler
- ifneq (,$$(filter %.c,$2))
- # Compile as a C file
- $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
- $1_$2_COMP=$5
- $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
- else ifneq (,$$(filter %.m,$2))
- # Compile as a objective-c file
- $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
- $1_$2_COMP=$5
- $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
- else ifneq (,$$(filter %.s,$2))
- # Compile as assembler file
- $1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
- $1_$2_COMP=$(AS)
- $1_$2_DEP_FLAG:=
- else
- # Compile as a C++ file
- $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
- $1_$2_COMP=$7
- $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
+ ifneq (,$$(filter %.c,$2))
+ # Compile as a C file
+ $1_$2_FLAGS=$4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+ $1_$2_COMP=$5
+ $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
+ else ifneq (,$$(filter %.m,$2))
+ # Compile as a objective-c file
+ $1_$2_FLAGS=-x objective-c $4 $$($1_$(notdir $2)_CFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+ $1_$2_COMP=$5
+ $1_$2_DEP_FLAG:=$(C_FLAG_DEPS)
+ else ifneq (,$$(filter %.s,$2))
+ # Compile as assembler file
+ $1_$2_FLAGS=$8 -DTHIS_FILE='"$$(<F)"'
+ $1_$2_COMP=$(AS)
+ $1_$2_DEP_FLAG:=
+ else
+ # Compile as a C++ file
+ $1_$2_FLAGS=$6 $$($1_$(notdir $2)_CXXFLAGS) -DTHIS_FILE='"$$(<F)"' -c
+ $1_$2_COMP=$7
+ $1_$2_DEP_FLAG:=$(CXX_FLAG_DEPS)
+ endif
+ # Generate the .o (.obj) file name and place it in the bin dir.
+ $1_$2_OBJ:=$3/$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $2)))))
+ # Only continue if this object file hasn't been processed already. This lets the first found
+ # source file override any other with the same name.
+ ifeq (,$$(findstring $$($1_$2_OBJ),$$($1_OBJS_SO_FAR)))
+ $1_OBJS_SO_FAR+=$$($1_$2_OBJ)
+ ifeq (,$$(filter %.s,$2))
+ # And this is the dependency file for this obj file.
+ $1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))
+ # Include previously generated dependency information. (if it exists)
+ -include $$($1_$2_DEP)
+
+ ifeq ($(COMPILER_TYPE),CL)
+ $1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \
+ -Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ))
+ endif
endif
- # Generate the .o (.obj) file name and place it in the bin dir.
- $1_$2_OBJ:=$3/$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $2)))))
- # Only continue if this object file hasn't been processed already. This lets the first found
- # source file override any other with the same name.
- ifeq (,$$(findstring $$($1_$2_OBJ),$$($1_OBJS_SO_FAR)))
- $1_OBJS_SO_FAR+=$$($1_$2_OBJ)
- ifeq (,$$(filter %.s,$2))
- # And this is the dependency file for this obj file.
- $1_$2_DEP:=$$(patsubst %$(OBJ_SUFFIX),%.d,$$($1_$2_OBJ))
- # Include previously generated dependency information. (if it exists)
- -include $$($1_$2_DEP)
- ifeq ($(COMPILER_TYPE),CL)
- $1_$2_DEBUG_OUT_FLAGS:=-Fd$$(patsubst %$(OBJ_SUFFIX),%.pdb,$$($1_$2_OBJ)) \
- -Fm$$(patsubst %$(OBJ_SUFFIX),%.map,$$($1_$2_OBJ))
- endif
- endif
-
- $$($1_$2_OBJ) : $2
+ $$($1_$2_OBJ) : $2
ifeq ($(COMPILER_TYPE),CC)
- $$(call COMPILING_MSG,$2,$$($1_TARGET))
+ $$(call COMPILING_MSG,$2,$$($1_TARGET))
# The Sun studio compiler doesn't output the full path to the object file in the
# generated deps files. Fixing it with sed. If compiling assembly, don't try this.
ifeq ($(COMPILER_NAME)$$(filter %.s,$2),ossc)
- $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP).tmp $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
- $(SED) 's|^$$(@F):|$$@:|' $$($1_$2_DEP).tmp > $$($1_$2_DEP)
+ $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP).tmp $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
+ $(SED) 's|^$$(@F):|$$@:|' $$($1_$2_DEP).tmp > $$($1_$2_DEP)
else
- $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
- endif
+ $$($1_$2_COMP) $$($1_$2_FLAGS) $$($1_$2_DEP_FLAG) $$($1_$2_DEP) $(CC_OUT_OPTION)$$($1_$2_OBJ) $2
+ endif
endif
# The Visual Studio compiler lacks a feature for generating make dependencies, but by
- # setting -showIncludes, all included files are printed. These are filtered out and
+ # setting -showIncludes, all included files are printed. These are filtered out and
# parsed into make dependences.
ifeq ($(COMPILER_TYPE),CL)
- ($$($1_$2_COMP) $$($1_$2_FLAGS) -showIncludes $$($1_$2_DEBUG_OUT_FLAGS) \
- $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 ; echo $$$$? > $$($1_$2_DEP).exitvalue) \
- | $(TEE) $$($1_$2_DEP).raw | $(GREP) -v "^Note: including file:" \
- && exit `cat $$($1_$2_DEP).exitvalue`
- $(RM) $$($1_$2_DEP).exitvalue
- ($(ECHO) $$@: \\ \
- && $(SED) -e '/^Note: including file:/!d' \
- -e 's|Note: including file: *||' \
- -e 's|\\|/|g' \
- -e 's|^\([a-zA-Z]\):|/cygdrive/\1|g' \
- -e '/$(subst /,\/,$(TOPDIR))/!d' \
- -e 's|$$$$| \\|g' \
- $$($1_$2_DEP).raw) > $$($1_$2_DEP)
+ ($$($1_$2_COMP) $$($1_$2_FLAGS) -showIncludes $$($1_$2_DEBUG_OUT_FLAGS) \
+ $(CC_OUT_OPTION)$$($1_$2_OBJ) $2 ; echo $$$$? > $$($1_$2_DEP).exitvalue) \
+ | $(TEE) $$($1_$2_DEP).raw | $(GREP) -v "^Note: including file:" \
+ && exit `cat $$($1_$2_DEP).exitvalue`
+ $(RM) $$($1_$2_DEP).exitvalue
+ ($(ECHO) $$@: \\ \
+ && $(SED) -e '/^Note: including file:/!d' \
+ -e 's|Note: including file: *||' \
+ -e 's|\\|/|g' \
+ -e 's|^\([a-zA-Z]\):|/cygdrive/\1|g' \
+ -e '/$(subst /,\/,$(TOPDIR))/!d' \
+ -e 's|$$$$| \\|g' \
+ $$($1_$2_DEP).raw) > $$($1_$2_DEP)
endif
- endif
+ endif
endef
define SetupNativeCompilation
- # param 1 is for example BUILD_MYPACKAGE
- # param 2,3,4,5,6,7,8 are named args.
- # SRC one or more directory roots to scan for C/C++ files.
- # LANG C or C++
- # CFLAGS the compiler flags to be used, used both for C and C++.
- # CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.
- # LDFLAGS the linker flags to be used, used both for C and C++.
- # LDFLAGS_SUFFIX the linker flags to be added last on the commandline
- # typically the libraries linked to.
- # ARFLAGS the archiver flags to be used
- # OBJECT_DIR the directory where we store the object files
- # LIBRARY the resulting library file
- # PROGRAM the resulting exec file
- # INCLUDES only pick source from these directories
- # EXCLUDES do not pick source from these directories
- # INCLUDE_FILES only compile exactly these files!
- # EXCLUDE_FILES with these names
- # VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run
- # RC_FLAGS flags for RC.
- # MAPFILE mapfile
- # REORDER reorder file
- # DEBUG_SYMBOLS add debug symbols (if configured on)
- # CC the compiler to use, default is $(CC)
- # LDEXE the linker to use for linking executables, default is $(LDEXE)
- # OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupNativeCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15),$(16),$(17),$(18),$(19),$(20),$(21),$(22),$(23),$(24),$(25),$(26))
- $(if $(27),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
+ # param 1 is for example BUILD_MYPACKAGE
+ # param 2,3,4,5,6,7,8 are named args.
+ # SRC one or more directory roots to scan for C/C++ files.
+ # LANG C or C++
+ # CFLAGS the compiler flags to be used, used both for C and C++.
+ # CXXFLAGS the compiler flags to be used for c++, if set overrides CFLAGS.
+ # LDFLAGS the linker flags to be used, used both for C and C++.
+ # LDFLAGS_SUFFIX the linker flags to be added last on the commandline
+ # typically the libraries linked to.
+ # ARFLAGS the archiver flags to be used
+ # OBJECT_DIR the directory where we store the object files
+ # LIBRARY the resulting library file
+ # PROGRAM the resulting exec file
+ # INCLUDES only pick source from these directories
+ # EXCLUDES do not pick source from these directories
+ # INCLUDE_FILES only compile exactly these files!
+ # EXCLUDE_FILES with these names
+ # VERSIONINFO_RESOURCE Input file for RC. Setting this implies that RC will be run
+ # RC_FLAGS flags for RC.
+ # MAPFILE mapfile
+ # REORDER reorder file
+ # DEBUG_SYMBOLS add debug symbols (if configured on)
+ # CC the compiler to use, default is $(CC)
+ # LDEXE the linker to use for linking executables, default is $(LDEXE)
+ # OPTIMIZATION sets optimization level to NONE, LOW, HIGH, HIGHEST
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupNativeCompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15),$(16),$(17),$(18),$(19),$(20),$(21),$(22),$(23),$(24),$(25),$(26))
+ $(if $(27),$(error Internal makefile error: Too many arguments to SetupNativeCompilation, please update NativeCompilation.gmk))
- ifneq (,$$($1_BIN))
- $$(error BIN has been replaced with OBJECT_DIR)
- endif
+ ifneq (,$$($1_BIN))
+ $$(error BIN has been replaced with OBJECT_DIR)
+ endif
- ifneq (,$$($1_LIB))
- $$(error LIB has been replaced with LIBRARY)
- endif
-
- ifneq (,$$($1_EXE))
- $$(error EXE has been replaced with PROGRAM)
- endif
+ ifneq (,$$($1_LIB))
+ $$(error LIB has been replaced with LIBRARY)
+ endif
- ifneq (,$$($1_LIBRARY))
- ifeq (,$$($1_OUTPUT_DIR))
- $$(error LIBRARY requires OUTPUT_DIR)
- endif
-
- ifneq ($$($1_LIBRARY),$(basename $$($1_LIBRARY)))
- $$(error directory of LIBRARY should be specified using OUTPUT_DIR)
- endif
+ ifneq (,$$($1_EXE))
+ $$(error EXE has been replaced with PROGRAM)
+ endif
- ifneq (,$(findstring $(SHARED_LIBRARY_SUFFIX),$$($1_LIBRARY)))
- $$(error LIBRARY should be specified without SHARED_LIBRARY_SUFFIX: $(SHARED_LIBRARY_SUFFIX))
- endif
-
- ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_LIBRARY)))
- $$(error LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
- endif
-
- $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_LIBRARY)$(SHARED_LIBRARY_SUFFIX)
- $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
-
+ ifneq (,$$($1_LIBRARY))
+ ifeq (,$$($1_OUTPUT_DIR))
+ $$(error LIBRARY requires OUTPUT_DIR)
endif
- ifneq (,$$($1_STATIC_LIBRARY))
- ifeq (,$$($1_OUTPUT_DIR))
- $$(error STATIC_LIBRARY requires OUTPUT_DIR)
- endif
+ ifneq ($$($1_LIBRARY),$(basename $$($1_LIBRARY)))
+ $$(error directory of LIBRARY should be specified using OUTPUT_DIR)
+ endif
- ifneq ($$($1_STATIC_LIBRARY),$(basename $$($1_STATIC_LIBRARY)))
- $$(error directory of STATIC_LIBRARY should be specified using OUTPUT_DIR)
- endif
+ ifneq (,$(findstring $(SHARED_LIBRARY_SUFFIX),$$($1_LIBRARY)))
+ $$(error LIBRARY should be specified without SHARED_LIBRARY_SUFFIX: $(SHARED_LIBRARY_SUFFIX))
+ endif
- ifneq (,$(findstring $(STATIC_LIBRARY_SUFFIX),$$($1_STATIC_LIBRARY)))
- $$(error STATIC_LIBRARY should be specified without STATIC_LIBRARY_SUFFIX: $(STATIC_LIBRARY_SUFFIX))
- endif
+ ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_LIBRARY)))
+ $$(error LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
+ endif
- ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_STATIC_LIBRARY)))
- $$(error STATIC_LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
- endif
+ $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_LIBRARY)$(SHARED_LIBRARY_SUFFIX)
+ $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
- $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)$(STATIC_LIBRARY_SUFFIX)
- $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
+ endif
+
+ ifneq (,$$($1_STATIC_LIBRARY))
+ ifeq (,$$($1_OUTPUT_DIR))
+ $$(error STATIC_LIBRARY requires OUTPUT_DIR)
endif
- ifneq (,$$($1_PROGRAM))
- ifeq (,$$($1_OUTPUT_DIR))
- $$(error PROGRAM requires OUTPUT_DIR)
- endif
+ ifneq ($$($1_STATIC_LIBRARY),$(basename $$($1_STATIC_LIBRARY)))
+ $$(error directory of STATIC_LIBRARY should be specified using OUTPUT_DIR)
+ endif
- ifneq ($$($1_PROGRAM),$(basename $$($1_PROGRAM)))
- $$(error directory of PROGRAM should be specified using OUTPUT_DIR)
- endif
+ ifneq (,$(findstring $(STATIC_LIBRARY_SUFFIX),$$($1_STATIC_LIBRARY)))
+ $$(error STATIC_LIBRARY should be specified without STATIC_LIBRARY_SUFFIX: $(STATIC_LIBRARY_SUFFIX))
+ endif
- ifneq (,$(findstring $(EXE_SUFFIX),$$($1_PROGRAM)))
- $$(error PROGRAM should be specified without EXE_SUFFIX: $(EXE_SUFFIX))
- endif
-
- $1_BASENAME:=$$($1_PROGRAM)$(EXE_SUFFIX)
- $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
-
+ ifneq (,$(findstring $(LIBRARY_PREFIX),$$($1_STATIC_LIBRARY)))
+ $$(error STATIC_LIBRARY should be specified without LIBRARY_PREFIX: $(LIBRARY_PREFIX))
endif
- ifeq (,$$($1_TARGET))
- $$(error Neither PROGRAM, LIBRARY nor STATIC_LIBRARY has been specified for SetupNativeCompilation)
+ $1_BASENAME:=$(LIBRARY_PREFIX)$$($1_STATIC_LIBRARY)$(STATIC_LIBRARY_SUFFIX)
+ $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
+ endif
+
+ ifneq (,$$($1_PROGRAM))
+ ifeq (,$$($1_OUTPUT_DIR))
+ $$(error PROGRAM requires OUTPUT_DIR)
endif
- ifeq (,$$($1_LANG))
- $$(error You have to specify LANG for native compilation $1)
- endif
- ifeq (C,$$($1_LANG))
- ifeq ($$($1_LDEXE),)
- $1_LDEXE:=$(LDEXE)
- endif
- $1_LD:=$(LD)
- else
- ifeq (C++,$$($1_LANG))
- $1_LD:=$(LDCXX)
- $1_LDEXE:=$(LDEXECXX)
- else
- $$(error Unknown native language $$($1_LANG) for $1)
- endif
+ ifneq ($$($1_PROGRAM),$(basename $$($1_PROGRAM)))
+ $$(error directory of PROGRAM should be specified using OUTPUT_DIR)
endif
- ifeq ($$($1_CC),)
- $1_CC:=$(CC)
+ ifneq (,$(findstring $(EXE_SUFFIX),$$($1_PROGRAM)))
+ $$(error PROGRAM should be specified without EXE_SUFFIX: $(EXE_SUFFIX))
endif
- # Make sure the dirs exist.
- $$(eval $$(call MakeDir,$$($1_OBJECT_DIR) $$($1_OUTPUT_DIR)))
- $$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))
+ $1_BASENAME:=$$($1_PROGRAM)$(EXE_SUFFIX)
+ $1_TARGET:=$$($1_OUTPUT_DIR)/$$($1_BASENAME)
+
+ endif
- # Find all files in the source trees. Sort to remove duplicates.
- $1_ALL_SRCS := $$(sort $$(call CacheFind,$$($1_SRC)))
- # Extract the C/C++ files.
- $1_EXCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_EXCLUDE_FILES)))
- $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
- ifneq ($$($1_EXCLUDE_FILES),)
- $1_EXCLUDE_FILES:=$$(addprefix %,$$($1_EXCLUDE_FILES))
- endif
- $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter %.s %.c %.cpp %.m,$$($1_ALL_SRCS)))
- ifneq (,$$(strip $$($1_INCLUDE_FILES)))
- $1_SRCS := $$(filter $$($1_INCLUDE_FILES),$$($1_SRCS))
+ ifeq (,$$($1_TARGET))
+ $$(error Neither PROGRAM, LIBRARY nor STATIC_LIBRARY has been specified for SetupNativeCompilation)
+ endif
+
+ ifeq (,$$($1_LANG))
+ $$(error You have to specify LANG for native compilation $1)
+ endif
+ ifeq (C,$$($1_LANG))
+ ifeq ($$($1_LDEXE),)
+ $1_LDEXE:=$(LDEXE)
endif
- ifeq (,$$($1_SRCS))
- $$(error No sources found for $1 when looking inside the dirs $$($1_SRC))
+ $1_LD:=$(LD)
+ else
+ ifeq (C++,$$($1_LANG))
+ $1_LD:=$(LDCXX)
+ $1_LDEXE:=$(LDEXECXX)
+ else
+ $$(error Unknown native language $$($1_LANG) for $1)
endif
- # There can be only a single bin dir root, no need to foreach over the roots.
- $1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX))
- # Now we have a list of all c/c++ files to compile: $$($1_SRCS)
- # and we have a list of all existing object files: $$($1_BINS)
+ endif
- # Prepend the source/bin path to the filter expressions. Then do the filtering.
- ifneq ($$($1_INCLUDES),)
- $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
- $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
- endif
- ifneq ($$($1_EXCLUDES),)
- $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
- $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
- endif
+ ifeq ($$($1_CC),)
+ $1_CC:=$(CC)
+ endif
+
+ # Make sure the dirs exist.
+ $$(eval $$(call MakeDir,$$($1_OBJECT_DIR) $$($1_OUTPUT_DIR)))
+ $$(foreach d,$$($1_SRC), $$(if $$(wildcard $$d),,$$(error SRC specified to SetupNativeCompilation $1 contains missing directory $$d)))
- # Calculate the expected output from compiling the sources (sort to remove duplicates. Also provides
- # a reproducable order on the input files to the linker).
- $1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_OBJECT_DIR)/,$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $$($1_SRCS))))))))
- # Are there too many object files on disk? Perhaps because some source file was removed?
- $1_SUPERFLOUS_OBJS:=$$(sort $$(filter-out $$($1_EXPECTED_OBJS),$$($1_BINS)))
- # Clean out the superfluous object files.
- ifneq ($$($1_SUPERFLUOUS_OBJS),)
- $$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS))
- endif
+ # Find all files in the source trees. Sort to remove duplicates.
+ $1_ALL_SRCS := $$(sort $$(call CacheFind,$$($1_SRC)))
+ # Extract the C/C++ files.
+ $1_EXCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_EXCLUDE_FILES)))
+ $1_INCLUDE_FILES:=$$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$($1_INCLUDE_FILES)))
+ ifneq ($$($1_EXCLUDE_FILES),)
+ $1_EXCLUDE_FILES:=$$(addprefix %,$$($1_EXCLUDE_FILES))
+ endif
+ $1_SRCS := $$(filter-out $$($1_EXCLUDE_FILES),$$(filter %.s %.c %.cpp %.m,$$($1_ALL_SRCS)))
+ ifneq (,$$(strip $$($1_INCLUDE_FILES)))
+ $1_SRCS := $$(filter $$($1_INCLUDE_FILES),$$($1_SRCS))
+ endif
+ ifeq (,$$($1_SRCS))
+ $$(error No sources found for $1 when looking inside the dirs $$($1_SRC))
+ endif
+ # There can be only a single bin dir root, no need to foreach over the roots.
+ $1_BINS := $$(wildcard $$($1_OBJECT_DIR)/*$(OBJ_SUFFIX))
+ # Now we have a list of all c/c++ files to compile: $$($1_SRCS)
+ # and we have a list of all existing object files: $$($1_BINS)
- # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CFLAGS.
- $1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS))
- ifneq ($(DEBUG_LEVEL),release)
- # Pickup extra debug dependent variables for CFLAGS
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_debug)
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug)
- else
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_release)
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_release)
- $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
- endif
+ # Prepend the source/bin path to the filter expressions. Then do the filtering.
+ ifneq ($$($1_INCLUDES),)
+ $1_SRC_INCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_INCLUDES))))
+ $1_SRCS := $$(filter $$($1_SRC_INCLUDES),$$($1_SRCS))
+ endif
+ ifneq ($$($1_EXCLUDES),)
+ $1_SRC_EXCLUDES := $$(foreach i,$$($1_SRC),$$(addprefix $$i/,$$(addsuffix /%,$$($1_EXCLUDES))))
+ $1_SRCS := $$(filter-out $$($1_SRC_EXCLUDES),$$($1_SRCS))
+ endif
- # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS.
- $1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS))
- ifneq ($(DEBUG_LEVEL),release)
- # Pickup extra debug dependent variables for CXXFLAGS
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_debug)
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug)
- else
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_release)
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_release)
- $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
- endif
+ # Calculate the expected output from compiling the sources (sort to remove duplicates. Also provides
+ # a reproducable order on the input files to the linker).
+ $1_EXPECTED_OBJS:=$$(sort $$(addprefix $$($1_OBJECT_DIR)/,$$(patsubst %.cpp,%$(OBJ_SUFFIX),$$(patsubst %.c,%$(OBJ_SUFFIX),$$(patsubst %.m,%$(OBJ_SUFFIX),$$(patsubst %.s,%$(OBJ_SUFFIX),$$(notdir $$($1_SRCS))))))))
+ # Are there too many object files on disk? Perhaps because some source file was removed?
+ $1_SUPERFLOUS_OBJS:=$$(sort $$(filter-out $$($1_EXPECTED_OBJS),$$($1_BINS)))
+ # Clean out the superfluous object files.
+ ifneq ($$($1_SUPERFLUOUS_OBJS),)
+ $$(shell $(RM) -f $$($1_SUPERFLUOUS_OBJS))
+ endif
+
+ # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CFLAGS.
+ $1_EXTRA_CFLAGS:=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CFLAGS_$(OPENJDK_TARGET_OS))
+ ifneq ($(DEBUG_LEVEL),release)
+ # Pickup extra debug dependent variables for CFLAGS
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_debug)
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_debug)
+ else
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_release)
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS_API)_release)
+ $1_EXTRA_CFLAGS+=$$($1_CFLAGS_$(OPENJDK_TARGET_OS)_release)
+ endif
- ifneq (,$$($1_DEBUG_SYMBOLS))
- ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
- ifdef OPENJDK
- # Always add debug symbols
- $1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
- $1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
- else
- # Programs don't get the debug symbols added in the old build. It's not clear if
- # this is intentional.
- ifeq ($$($1_PROGRAM),)
- $1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
- $1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
- endif
- endif
+ # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables for CXXFLAGS.
+ $1_EXTRA_CXXFLAGS:=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_CXXFLAGS_$(OPENJDK_TARGET_OS))
+ ifneq ($(DEBUG_LEVEL),release)
+ # Pickup extra debug dependent variables for CXXFLAGS
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_debug)
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_debug)
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_debug)
+ else
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_release)
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS_API)_release)
+ $1_EXTRA_CXXFLAGS+=$$($1_CXXFLAGS_$(OPENJDK_TARGET_OS)_release)
+ endif
+
+ ifneq (,$$($1_DEBUG_SYMBOLS))
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
+ ifdef OPENJDK
+ # Always add debug symbols
+ $1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
+ $1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
+ else
+ # Programs don't get the debug symbols added in the old build. It's not clear if
+ # this is intentional.
+ ifeq ($$($1_PROGRAM),)
+ $1_EXTRA_CFLAGS+=$(CFLAGS_DEBUG_SYMBOLS)
+ $1_EXTRA_CXXFLAGS+=$(CXXFLAGS_DEBUG_SYMBOLS)
endif
- endif
-
- ifeq ($$($1_CXXFLAGS),)
- $1_CXXFLAGS:=$$($1_CFLAGS)
+ endif
endif
- ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)),)
- $1_EXTRA_CXXFLAGS:=$$($1_EXTRA_CFLAGS)
- endif
+ endif
- ifneq (,$$($1_REORDER))
- $1_EXTRA_CFLAGS += $$(C_FLAG_REORDER)
- $1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER)
- endif
+ ifeq ($$($1_CXXFLAGS),)
+ $1_CXXFLAGS:=$$($1_CFLAGS)
+ endif
+ ifeq ($$(strip $$($1_EXTRA_CXXFLAGS)),)
+ $1_EXTRA_CXXFLAGS:=$$($1_EXTRA_CFLAGS)
+ endif
+
+ ifneq (,$$($1_REORDER))
+ $1_EXTRA_CFLAGS += $$(C_FLAG_REORDER)
+ $1_EXTRA_CXXFLAGS += $$(CXX_FLAG_REORDER)
+ endif
- ifeq (NONE, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $(C_O_FLAG_NONE)
- $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NONE)
- else ifeq (LOW, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $(C_O_FLAG_NORM)
- $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NORM)
- else ifeq (HIGH, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $(C_O_FLAG_HI)
- $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HI)
- else ifeq (HIGHEST, $$($1_OPTIMIZATION))
- $1_EXTRA_CFLAGS += $(C_O_FLAG_HIGHEST)
- $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HIGHEST)
- else ifneq (, $$($1_OPTIMIZATION))
- $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
- endif
+ ifeq (NONE, $$($1_OPTIMIZATION))
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_NONE)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NONE)
+ else ifeq (LOW, $$($1_OPTIMIZATION))
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_NORM)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_NORM)
+ else ifeq (HIGH, $$($1_OPTIMIZATION))
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_HI)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HI)
+ else ifeq (HIGHEST, $$($1_OPTIMIZATION))
+ $1_EXTRA_CFLAGS += $(C_O_FLAG_HIGHEST)
+ $1_EXTRA_CXXFLAGS += $(CXX_O_FLAG_HIGHEST)
+ else ifneq (, $$($1_OPTIMIZATION))
+ $$(error Unknown value for OPTIMIZATION: $$($1_OPTIMIZATION))
+ endif
- # Now call add_native_source for each source file we are going to compile.
- $$(foreach p,$$($1_SRCS),\
- $$(eval $$(call add_native_source,$1,$$p,$$($1_OBJECT_DIR),\
- $$($1_CFLAGS) $$($1_EXTRA_CFLAGS),$$($1_CC),\
- $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX),$$($1_ASFLAGS))))
+ # Now call add_native_source for each source file we are going to compile.
+ $$(foreach p,$$($1_SRCS), \
+ $$(eval $$(call add_native_source,$1,$$p,$$($1_OBJECT_DIR), \
+ $$($1_CFLAGS) $$($1_EXTRA_CFLAGS),$$($1_CC), \
+ $$($1_CXXFLAGS) $$($1_EXTRA_CXXFLAGS),$(CXX),$$($1_ASFLAGS))))
- # On windows we need to create a resource file
- ifeq ($(OPENJDK_TARGET_OS), windows)
- ifneq (,$$($1_VERSIONINFO_RESOURCE))
- $1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
- $$($1_RES): $$($1_VERSIONINFO_RESOURCE)
+ # On windows we need to create a resource file
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ ifneq (,$$($1_VERSIONINFO_RESOURCE))
+ $1_RES:=$$($1_OBJECT_DIR)/$$($1_BASENAME).res
+ $$($1_RES): $$($1_VERSIONINFO_RESOURCE)
$(RC) $$($1_RC_FLAGS) $(CC_OUT_OPTION)$$@ $$($1_VERSIONINFO_RESOURCE)
- endif
- ifneq (,$$($1_MANIFEST))
- $1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest
- IMVERSIONVALUE:=$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION).$(JDK_UPDATE_VERSION).$(COOKED_BUILD_NUMBER)
- $$($1_GEN_MANIFEST): $$($1_MANIFEST)
+ endif
+ ifneq (,$$($1_MANIFEST))
+ $1_GEN_MANIFEST:=$$($1_OBJECT_DIR)/$$($1_PROGRAM).manifest
+ IMVERSIONVALUE:=$(JDK_MINOR_VERSION).$(JDK_MICRO_VERSION).$(JDK_UPDATE_VERSION).$(COOKED_BUILD_NUMBER)
+ $$($1_GEN_MANIFEST): $$($1_MANIFEST)
$(SED) 's%IMVERSION%$$(IMVERSIONVALUE)%g;s%PROGRAM%$$($1_PROGRAM)%g' $$< > $$@
- endif
endif
+ endif
- # mapfile doesnt seem to be implemented on macosx (yet??)
- ifneq ($(OPENJDK_TARGET_OS),macosx)
+ # mapfile doesnt seem to be implemented on macosx (yet??)
+ ifneq ($(OPENJDK_TARGET_OS),macosx)
ifneq ($(OPENJDK_TARGET_OS),windows)
- $1_REAL_MAPFILE:=$$($1_MAPFILE)
- ifneq (,$$($1_REORDER))
- $1_REAL_MAPFILE:=$$($1_OBJECT_DIR)/mapfile
+ $1_REAL_MAPFILE:=$$($1_MAPFILE)
+ ifneq (,$$($1_REORDER))
+ $1_REAL_MAPFILE:=$$($1_OBJECT_DIR)/mapfile
- $$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER)
+ $$($1_REAL_MAPFILE) : $$($1_MAPFILE) $$($1_REORDER)
$$(MKDIR) -p $$(@D)
$$(CP) $$($1_MAPFILE) $$@.tmp
$$(SED) -e 's=OUTPUTDIR=$$($1_OBJECT_DIR)=' $$($1_REORDER) >> $$@.tmp
$$(MV) $$@.tmp $$@
- endif
+ endif
endif
+ endif
+
+ # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables
+ # for LDFLAGS and LDFLAGS_SUFFIX
+ $1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS))
+ $1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS))
+ ifneq (,$$($1_REAL_MAPFILE))
+ $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE))
+ endif
+
+ $1 := $$($1_TARGET)
+ ifneq (,$$($1_LIBRARY))
+ # Generating a dynamic library.
+ $1_EXTRA_LDFLAGS+=$$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME))
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $1_EXTRA_LDFLAGS+="-implib:$$($1_OBJECT_DIR)/$$($1_LIBRARY).lib"
endif
- # Pickup extra OPENJDK_TARGET_OS_API and/or OPENJDK_TARGET_OS dependent variables
- # for LDFLAGS and LDFLAGS_SUFFIX
- $1_EXTRA_LDFLAGS:=$$($1_LDFLAGS_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_$(OPENJDK_TARGET_OS))
- $1_EXTRA_LDFLAGS_SUFFIX:=$$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS_API)) $$($1_LDFLAGS_SUFFIX_$(OPENJDK_TARGET_OS))
- ifneq (,$$($1_REAL_MAPFILE))
- $1_EXTRA_LDFLAGS += $(call SET_SHARED_LIBRARY_MAPFILE,$$($1_REAL_MAPFILE))
- endif
+ $1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
- $1 := $$($1_TARGET)
- ifneq (,$$($1_LIBRARY))
- # Generating a dynamic library.
- $1_EXTRA_LDFLAGS+=$$(call SET_SHARED_LIBRARY_NAME,$$($1_BASENAME))
+ ifneq (,$$($1_DEBUG_SYMBOLS))
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
ifeq ($(OPENJDK_TARGET_OS), windows)
- $1_EXTRA_LDFLAGS+="-implib:$$($1_OBJECT_DIR)/$$($1_LIBRARY).lib"
+ $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_LIBRARY).pdb" \
+ "-map:$$($1_OBJECT_DIR)/$$($1_LIBRARY).map"
endif
- $1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
-
- ifneq (,$$($1_DEBUG_SYMBOLS))
- ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_LIBRARY).pdb" \
- "-map:$$($1_OBJECT_DIR)/$$($1_LIBRARY).map"
- endif
-
- ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
- $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
- $(CP) $$< $$@
- endif
-
- ifeq ($(OPENJDK_TARGET_OS), solaris)
- # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
- # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
- # empty section headers until a fixed $(OBJCOPY) is available.
- # An empty section header has sh_addr == 0 and sh_size == 0.
- # This problem has only been seen on Solaris X64, but we call this tool
- # on all Solaris builds just in case.
- #
- # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
- # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
- $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET) \
- $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
- $(RM) $$@
- $(FIX_EMPTY_SEC_HDR_FLAGS) $(LOG_INFO) $$<
- $(OBJCOPY) --only-keep-debug $$< $$@
- $(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $(LOG_INFO) $$(@F) $$<
- else # not solaris
- $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET)
- $(RM) $$@
- $(OBJCOPY) --only-keep-debug $$< $$@
- $(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
- endif # Touch to not retrigger rule on rebuild
- $(TOUCH) $$@
-
- ifeq ($(ZIP_DEBUGINFO_FILES), true)
- $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz
-
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET)
- $(CD) $$($1_OBJECT_DIR) \
- && $(ZIP) -q $$@ $$($1_LIBRARY).map $$($1_LIBRARY).pdb
- else
- $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET) \
- $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
- $(CD) $$($1_OBJECT_DIR) \
- && $(ZIP) -q $$@ $$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
- endif
- else
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $1 += $$($1_OUTPUT_DIR)/$$($1_LIBRARY).map \
- $$($1_OUTPUT_DIR)/$$($1_LIBRARY).pdb
- else
- $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
- endif
- endif
- endif
+ ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
+ $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
+ $(CP) $$< $$@
endif
- $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE)
- $$(call LINKING_MSG,$$($1_BASENAME))
- $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(LD_OUT_OPTION)$$@ \
- $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
- $$($1_EXTRA_LDFLAGS_SUFFIX)
+ ifeq ($(OPENJDK_TARGET_OS), solaris)
+ # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
+ # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
+ # empty section headers until a fixed $(OBJCOPY) is available.
+ # An empty section header has sh_addr == 0 and sh_size == 0.
+ # This problem has only been seen on Solaris X64, but we call this tool
+ # on all Solaris builds just in case.
+ #
+ # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
+ # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
+ $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET) \
+ $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
+ $(RM) $$@
+ $(FIX_EMPTY_SEC_HDR_FLAGS) $(LOG_INFO) $$<
+ $(OBJCOPY) --only-keep-debug $$< $$@
+ $(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $(LOG_INFO) $$(@F) $$<
+ else # not solaris
+ $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo : $$($1_TARGET)
+ $(RM) $$@
+ $(OBJCOPY) --only-keep-debug $$< $$@
+ $(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
+ endif # Touch to not retrigger rule on rebuild
+ $(TOUCH) $$@
- endif
+ ifeq ($(ZIP_DEBUGINFO_FILES), true)
+ $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz
- ifneq (,$$($1_STATIC_LIBRARY))
- # Generating a static library, ie object file archive.
- $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES)
- $$(call ARCHIVING_MSG,$$($1_LIBRARY))
- $(AR) $$($1_AR_FLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_EXPECTED_OBJS) \
- $$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET)
+ $(CD) $$($1_OBJECT_DIR) \
+ && $(ZIP) -q $$@ $$($1_LIBRARY).map $$($1_LIBRARY).pdb
+ else
+ $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).diz : $$($1_TARGET) \
+ $$($1_OBJECT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
+ $(CD) $$($1_OBJECT_DIR) \
+ && $(ZIP) -q $$@ $$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
+ endif
+ else
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $1 += $$($1_OUTPUT_DIR)/$$($1_LIBRARY).map \
+ $$($1_OUTPUT_DIR)/$$($1_LIBRARY).pdb
+ else
+ $1 += $$($1_OUTPUT_DIR)/$$(LIBRARY_PREFIX)$$($1_LIBRARY).debuginfo
+ endif
+ endif
+ endif
endif
- ifneq (,$$($1_PROGRAM))
- # A executable binary has been specified, setup the target for it.
- ifneq (,$$($1_DEBUG_SYMBOLS))
- ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_PROGRAM).pdb" \
- "-map:$$($1_OBJECT_DIR)/$$($1_PROGRAM).map"
- endif
+ $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_REAL_MAPFILE)
+ $$(call LINKING_MSG,$$($1_BASENAME))
+ $$($1_LD) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(LD_OUT_OPTION)$$@ \
+ $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
+ $$($1_EXTRA_LDFLAGS_SUFFIX)
- ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
- $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
- $(CP) $$< $$@
- endif
+ endif
- ifeq ($(OPENJDK_TARGET_OS), solaris)
- # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
- # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
- # empty section headers until a fixed $(OBJCOPY) is available.
- # An empty section header has sh_addr == 0 and sh_size == 0.
- # This problem has only been seen on Solaris X64, but we call this tool
- # on all Solaris builds just in case.
- #
- # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
- # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
- $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET) \
- $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
- $(RM) $$@
- $(FIX_EMPTY_SEC_HDR_FLAGS) $(LOG_INFO) $$<
- $(OBJCOPY) --only-keep-debug $$< $$@
- $(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $(LOG_INFO) $$(@F) $$<
- else # not solaris
- $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET)
- $(RM) $$@
- $(OBJCOPY) --only-keep-debug $$< $$@
- $(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
- endif
- $(TOUCH) $$@
+ ifneq (,$$($1_STATIC_LIBRARY))
+ # Generating a static library, ie object file archive.
+ $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES)
+ $$(call ARCHIVING_MSG,$$($1_LIBRARY))
+ $(AR) $$($1_AR_FLAGS) $(AR_OUT_OPTION)$$($1_TARGET) $$($1_EXPECTED_OBJS) \
+ $$($1_RES) $$($1_LDFLAGS_SUFFIX) $$($1_EXTRA_LDFLAGS_SUFFIX)
+ endif
- ifeq ($(ZIP_DEBUGINFO_FILES), true)
- $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).diz
+ ifneq (,$$($1_PROGRAM))
+ # A executable binary has been specified, setup the target for it.
+ ifneq (,$$($1_DEBUG_SYMBOLS))
+ ifeq ($(ENABLE_DEBUG_SYMBOLS), true)
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $1_EXTRA_LDFLAGS+="-pdb:$$($1_OBJECT_DIR)/$$($1_PROGRAM).pdb" \
+ "-map:$$($1_OBJECT_DIR)/$$($1_PROGRAM).map"
+ endif
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $$($1_OBJECT_DIR)/$$($1_PROGRAM).diz : $$($1_TARGET)
- $(CD) $$($1_OBJECT_DIR) \
- && $(ZIP) -q $$@ $$($1_PROGRAM).map $$($1_PROGRAM).pdb
- else
- $$($1_OBJECT_DIR)/$$(PROGRAM_PREFIX)$$($1_PROGRAM).diz : $$($1_TARGET) \
- $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo
- $(CD) $$($1_OBJECT_DIR) \
- && $(ZIP) -q $$@ $$($1_PROGRAM).debuginfo
- endif
- else
- ifeq ($(OPENJDK_TARGET_OS), windows)
- $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).map \
- $$($1_OUTPUT_DIR)/$$($1_PROGRAM).pdb
- else
- $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).debuginfo
- endif
- endif
- endif
+ ifneq ($$($1_OUTPUT_DIR),$$($1_OBJECT_DIR))
+ $$($1_OUTPUT_DIR)/% : $$($1_OBJECT_DIR)/%
+ $(CP) $$< $$@
endif
- $1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
+ ifeq ($(OPENJDK_TARGET_OS), solaris)
+ # gobjcopy crashes on "empty" section headers with the SHF_ALLOC flag set.
+ # Use $(FIX_EMPTY_SEC_HDR_FLAGS) to clear the SHF_ALLOC flag (if set) from
+ # empty section headers until a fixed $(OBJCOPY) is available.
+ # An empty section header has sh_addr == 0 and sh_size == 0.
+ # This problem has only been seen on Solaris X64, but we call this tool
+ # on all Solaris builds just in case.
+ #
+ # $(OBJCOPY) --add-gnu-debuglink=... corrupts SUNW_* sections.
+ # Use $(ADD_GNU_DEBUGLINK) until a fixed $(OBJCOPY) is available.
+ $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET) \
+ $(FIX_EMPTY_SEC_HDR_FLAGS) $(ADD_GNU_DEBUGLINK)
+ $(RM) $$@
+ $(FIX_EMPTY_SEC_HDR_FLAGS) $(LOG_INFO) $$<
+ $(OBJCOPY) --only-keep-debug $$< $$@
+ $(CD) $$(@D) && $(ADD_GNU_DEBUGLINK) $(LOG_INFO) $$(@F) $$<
+ else # not solaris
+ $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo : $$($1_TARGET)
+ $(RM) $$@
+ $(OBJCOPY) --only-keep-debug $$< $$@
+ $(CD) $$(@D) && $(OBJCOPY) --add-gnu-debuglink=$$(@F) $$<
+ endif
+ $(TOUCH) $$@
+
+ ifeq ($(ZIP_DEBUGINFO_FILES), true)
+ $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).diz
- $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST)
- $$(call LINKING_EXE_MSG,$$($1_BASENAME))
- $$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(EXE_OUT_OPTION)$$($1_TARGET) \
- $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
- $$($1_EXTRA_LDFLAGS_SUFFIX)
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $$($1_OBJECT_DIR)/$$($1_PROGRAM).diz : $$($1_TARGET)
+ $(CD) $$($1_OBJECT_DIR) \
+ && $(ZIP) -q $$@ $$($1_PROGRAM).map $$($1_PROGRAM).pdb
+ else
+ $$($1_OBJECT_DIR)/$$(PROGRAM_PREFIX)$$($1_PROGRAM).diz : $$($1_TARGET) \
+ $$($1_OBJECT_DIR)/$$($1_PROGRAM).debuginfo
+ $(CD) $$($1_OBJECT_DIR) \
+ && $(ZIP) -q $$@ $$($1_PROGRAM).debuginfo
+ endif
+ else
+ ifeq ($(OPENJDK_TARGET_OS), windows)
+ $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).map \
+ $$($1_OUTPUT_DIR)/$$($1_PROGRAM).pdb
+ else
+ $1 += $$($1_OUTPUT_DIR)/$$($1_PROGRAM).debuginfo
+ endif
+ endif
+ endif
+ endif
+
+ $1_EXTRA_LDFLAGS_SUFFIX += $(GLOBAL_LDFLAGS_SUFFIX)
+
+ $$($1_TARGET) : $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_GEN_MANIFEST)
+ $$(call LINKING_EXE_MSG,$$($1_BASENAME))
+ $$($1_LDEXE) $$($1_LDFLAGS) $$($1_EXTRA_LDFLAGS) $(EXE_OUT_OPTION)$$($1_TARGET) \
+ $$($1_EXPECTED_OBJS) $$($1_RES) $$($1_LDFLAGS_SUFFIX) \
+ $$($1_EXTRA_LDFLAGS_SUFFIX)
ifneq (,$$($1_GEN_MANIFEST))
- $(MT) -nologo -manifest $$($1_GEN_MANIFEST) -outputresource:$$@;#1
+ $(MT) -nologo -manifest $$($1_GEN_MANIFEST) -outputresource:$$@;#1
endif
# This only works if the openjdk_codesign identity is present on the system. Let
# silently fail otherwise.
ifneq (,$(CODESIGN))
- ifneq (,$$($1_CODESIGN))
- $(CODESIGN) -s openjdk_codesign $$@
- endif
+ ifneq (,$$($1_CODESIGN))
+ $(CODESIGN) -s openjdk_codesign $$@
+ endif
endif
- endif
+ endif
endef
--- a/common/makefiles/RMICompilation.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/RMICompilation.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -24,74 +24,74 @@
#
define SetupRMICompilation
- # param 1 is a name for a variable to depend on.
- # param 2 and up are named args.
- # CLASSES:=List of classes to generate stubs for
- # CLASSES_DIR:=Directory where to look for classes
- # STUB_CLASSES_DIR:=Directory in where to put stub classes
- # RUN_V11:=Set to run rmic with -v1.1
- # RUN_V12:=Set to run rmic with -v1.2
- # RUN_IIOP:=Set to run rmic with -iiop
- # RUN_IIOP_STDPKG:=Set to run rmic with -iiop -standardPackage
- # KEEP_GENERATED:=Set to keep generated sources around
- $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
- $(call LogSetupMacroEntry,SetupRMICompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
- $(if $(16),$(error Internal makefile error: Too many arguments to SetupRMICompilation, please update RMICompilation.gmk))
+ # param 1 is a name for a variable to depend on.
+ # param 2 and up are named args.
+ # CLASSES:=List of classes to generate stubs for
+ # CLASSES_DIR:=Directory where to look for classes
+ # STUB_CLASSES_DIR:=Directory in where to put stub classes
+ # RUN_V11:=Set to run rmic with -v1.1
+ # RUN_V12:=Set to run rmic with -v1.2
+ # RUN_IIOP:=Set to run rmic with -iiop
+ # RUN_IIOP_STDPKG:=Set to run rmic with -iiop -standardPackage
+ # KEEP_GENERATED:=Set to keep generated sources around
+ $(foreach i,2 3 4 5 6 7 8 9 10 11 12 13 14 15, $(if $($i),$1_$(strip $($i)))$(NEWLINE))
+ $(call LogSetupMacroEntry,SetupRMICompilation($1),$2,$3,$4,$5,$6,$7,$8,$9,$(10),$(11),$(12),$(13),$(14),$(15))
+ $(if $(16),$(error Internal makefile error: Too many arguments to SetupRMICompilation, please update RMICompilation.gmk))
- $1_DEP_FILE := $$($1_STUB_CLASSES_DIR)/$1_rmic
+ $1_DEP_FILE := $$($1_STUB_CLASSES_DIR)/$1_rmic
- $1_CLASSES_SLASH := $$(subst .,/,$$($1_CLASSES))
- $1_CLASS_FILES := $$(addprefix $$($1_CLASSES_DIR)/,$$(addsuffix .class,$$($1_CLASSES_SLASH)))
- $1_STUB_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Stub.class,$$($1_CLASSES_SLASH)))
- $1_TARGETS := $$($1_STUB_FILES)
- $1_ARGS :=
- ifneq (,$$($1_RUN_V11))
- $1_SKEL_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Skel.class,$$($1_CLASSES_SLASH)))
- $1_TARGETS += $$($1_SKEL_FILES)
- $1_ARGS += -v1.1
- endif
- ifneq (,$$($1_RUN_V12))
- $1_ARGS += -v1.2
- endif
+ $1_CLASSES_SLASH := $$(subst .,/,$$($1_CLASSES))
+ $1_CLASS_FILES := $$(addprefix $$($1_CLASSES_DIR)/,$$(addsuffix .class,$$($1_CLASSES_SLASH)))
+ $1_STUB_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Stub.class,$$($1_CLASSES_SLASH)))
+ $1_TARGETS := $$($1_STUB_FILES)
+ $1_ARGS :=
+ ifneq (,$$($1_RUN_V11))
+ $1_SKEL_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Skel.class,$$($1_CLASSES_SLASH)))
+ $1_TARGETS += $$($1_SKEL_FILES)
+ $1_ARGS += -v1.1
+ endif
+ ifneq (,$$($1_RUN_V12))
+ $1_ARGS += -v1.2
+ endif
- $1_TIE_BASE_FILES := $$(foreach f,$$($1_CLASSES_SLASH),$$(dir $$f)_$$(notdir $$f))
- $1_TIE_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/org/omg/stub/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES)))
- $1_TIE_STDPKG_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES)))
+ $1_TIE_BASE_FILES := $$(foreach f,$$($1_CLASSES_SLASH),$$(dir $$f)_$$(notdir $$f))
+ $1_TIE_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/org/omg/stub/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES)))
+ $1_TIE_STDPKG_FILES := $$(addprefix $$($1_STUB_CLASSES_DIR)/,$$(addsuffix _Tie.class,$$($1_TIE_BASE_FILES)))
- ifneq (,$$($1_RUN_IIOP))
- $1_TARGETS += $$($1_TIE_FILES)
- $1_ARGS += -iiop
- endif
- ifneq (,$$($1_RUN_IIOP_STDPKG))
- $1_TARGETS += $$($1_TIE_STDPKG_FILES)
- $1_ARGS2 := -iiop -standardPackage
- endif
+ ifneq (,$$($1_RUN_IIOP))
+ $1_TARGETS += $$($1_TIE_FILES)
+ $1_ARGS += -iiop
+ endif
+ ifneq (,$$($1_RUN_IIOP_STDPKG))
+ $1_TARGETS += $$($1_TIE_STDPKG_FILES)
+ $1_ARGS2 := -iiop -standardPackage
+ endif
- ifneq (,$$($1_KEEP_GENERATED))
- $1_ARGS += -keepgenerated
- $1_TARGETS += $$(subst .class,.java,$$($1_TARGETS))
- endif
+ ifneq (,$$($1_KEEP_GENERATED))
+ $1_ARGS += -keepgenerated
+ $1_TARGETS += $$(subst .class,.java,$$($1_TARGETS))
+ endif
- $1_DOLLAR_SAFE_CLASSES := $$(subst $$$$,\$$$$,$$($1_CLASSES))
+ $1_DOLLAR_SAFE_CLASSES := $$(subst $$$$,\$$$$,$$($1_CLASSES))
- $$($1_TARGETS): $$($1_DEP_FILE) $$($1_CLASS_FILES)
+ $$($1_TARGETS): $$($1_DEP_FILE) $$($1_CLASS_FILES)
- $$($1_DEP_FILE): $$($1_CLASS_FILES)
+ $$($1_DEP_FILE): $$($1_CLASS_FILES)
$(MKDIR) -p $$($1_STUB_CLASSES_DIR)
if [ "x$$($1_ARGS)" != "x" ]; then \
- $(ECHO) $(LOG_INFO) Running rmic $$($1_ARGS) for $$($1_DOLLAR_SAFE_CLASSES) &&\
- $(RMIC) $$($1_ARGS) -classpath "$$($1_CLASSES_DIR)" \
- -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES);\
+ $(ECHO) $(LOG_INFO) Running rmic $$($1_ARGS) for $$($1_DOLLAR_SAFE_CLASSES) && \
+ $(RMIC) $$($1_ARGS) -classpath "$$($1_CLASSES_DIR)" \
+ -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES); \
fi;
if [ "x$$($1_ARGS2)" != "x" ]; then \
- $(ECHO) $(LOG_INFO) Running rmic $$($1_ARGS2) for $$($1_DOLLAR_SAFE_CLASSES) &&\
- $(RMIC) $$($1_ARGS2) -classpath "$$($1_CLASSES_DIR)" \
- -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES);\
+ $(ECHO) $(LOG_INFO) Running rmic $$($1_ARGS2) for $$($1_DOLLAR_SAFE_CLASSES) && \
+ $(RMIC) $$($1_ARGS2) -classpath "$$($1_CLASSES_DIR)" \
+ -d $$($1_STUB_CLASSES_DIR) $$($1_DOLLAR_SAFE_CLASSES); \
fi;
- $1 := $$($1_TARGETS)
+ $1 := $$($1_TARGETS)
- # By marking as secondary, this "touch" file doesn't need to be touched and will never exist.
- .SECONDARY: $$($1_DEP_FILE)
+ # By marking as secondary, this "touch" file doesn't need to be touched and will never exist.
+ .SECONDARY: $$($1_DEP_FILE)
endef
--- a/common/makefiles/devkit/Makefile Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/devkit/Makefile Thu Oct 10 14:58:19 2013 +0200
@@ -25,12 +25,12 @@
##########################################################################################
#
-# This Makefile, together with Tools.gmk, can be used to compile a set of
-# gcc based cross compilation, portable, self contained packages, capable
+# This Makefile, together with Tools.gmk, can be used to compile a set of
+# gcc based cross compilation, portable, self contained packages, capable
# of building OpenJDK.
-#
-# In addition to the makefiles, access to Oracle Linux installation
-# media is required. This has been tested against Oracle Enterprise Linux
+#
+# In addition to the makefiles, access to Oracle Linux installation
+# media is required. This has been tested against Oracle Enterprise Linux
# 5.5. Set variables RPM_DIR_x86_64 and RPM_DIR_i686 respectively to point
# to directory containing the RPMs.
#
@@ -43,9 +43,9 @@
#
# To build the full set of crosstools, use a command line looking like this:
#
-# make tars RPM_DIR_x86_64=/tmp/oel55-x86_64/Server/ RPM_DIR_i686=/tmp/oel55-i686/Server/
+# make tars RPM_DIR_x86_64=/tmp/oel55-x86_64/Server/ RPM_DIR_i686=/tmp/oel55-i686/Server/
#
-# To create a x86_64 package without the redundant i686 cross compiler, do
+# To create a x86_64 package without the redundant i686 cross compiler, do
# like this:
#
# make tars platforms=x86_64-unknown-linux-gnu RPM_DIR_x86_64=/tmp/oel55-x86_64/Server/ RPM_DIR_i686=/tmp/oel55-i686/Server/
@@ -54,70 +54,68 @@
# Main makefile which iterates over all host and target platforms.
#
-os := $(shell uname -o)
-cpu := x86_64
+os := $(shell uname -o)
+cpu := x86_64
#$(shell uname -p)
#
# This wrapper script can handle exactly these platforms
#
-platforms := $(foreach p,x86_64 i686,$(p)-unknown-linux-gnu)
-#platforms := $(foreach p,x86_64,$(p)-unknown-linux-gnu)
+platforms := $(foreach p,x86_64 i686,$(p)-unknown-linux-gnu)
+#platforms := $(foreach p,x86_64,$(p)-unknown-linux-gnu)
# Figure out what platform this is building on.
-me := $(cpu)-$(if $(findstring Linux,$(os)),unknown-linux-gnu)
+me := $(cpu)-$(if $(findstring Linux,$(os)),unknown-linux-gnu)
$(info Building on platform $(me))
-all compile : $(platforms)
+all compile : $(platforms)
ifeq (,$(SKIP_ME))
-$(foreach p,$(filter-out $(me),$(platforms)),$(eval $(p) : $$(me)))
+ $(foreach p,$(filter-out $(me),$(platforms)),$(eval $(p) : $$(me)))
endif
-OUTPUT_ROOT = $(abspath ../../../build/devkit)
-RESULT = $(OUTPUT_ROOT)/result
+OUTPUT_ROOT = $(abspath ../../../build/devkit)
+RESULT = $(OUTPUT_ROOT)/result
-submakevars = HOST=$@ BUILD=$(me) \
- RESULT=$(RESULT) PREFIX=$(RESULT)/$@ \
- OUTPUT_ROOT=$(OUTPUT_ROOT)
-$(platforms) :
- @echo 'Building compilers for $@'
- @echo 'Targets: $(platforms)'
- for p in $@ $(filter-out $@,$(platforms)); do \
- $(MAKE) -f Tools.gmk all $(submakevars) \
- TARGET=$$p || exit 1 ; \
- done
- @echo 'Building ccache program for $@'
- $(MAKE) -f Tools.gmk ccache $(submakevars) TARGET=$@
- @echo 'All done"'
+submakevars = HOST=$@ BUILD=$(me) \
+ RESULT=$(RESULT) PREFIX=$(RESULT)/$@ \
+ OUTPUT_ROOT=$(OUTPUT_ROOT)
+$(platforms) :
+ @echo 'Building compilers for $@'
+ @echo 'Targets: $(platforms)'
+ for p in $@ $(filter-out $@,$(platforms)); do \
+ $(MAKE) -f Tools.gmk all $(submakevars) \
+ TARGET=$$p || exit 1 ; \
+ done
+ @echo 'Building ccache program for $@'
+ $(MAKE) -f Tools.gmk ccache $(submakevars) TARGET=$@
+ @echo 'All done"'
$(foreach a,i686 x86_64,$(eval $(a) : $(filter $(a)%,$(platforms))))
-ia32 : i686
-today := $(shell date +%Y%m%d)
+ia32 : i686
+today := $(shell date +%Y%m%d)
define Mktar
-$(1)_tar = $$(RESULT)/sdk-$(1)-$$(today).tar.gz
-$$($(1)_tar) : PLATFORM = $(1)
-TARFILES += $$($(1)_tar)
-$$($(1)_tar) : $(1) $$(shell find $$(RESULT)/$(1))
+ $(1)_tar = $$(RESULT)/sdk-$(1)-$$(today).tar.gz
+ $$($(1)_tar) : PLATFORM = $(1)
+ TARFILES += $$($(1)_tar)
+ $$($(1)_tar) : $(1) $$(shell find $$(RESULT)/$(1))
endef
$(foreach p,$(platforms),$(eval $(call Mktar,$(p))))
-tars : all $(TARFILES)
-onlytars : $(TARFILES)
-%.tar.gz :
- @echo 'Creating compiler package $@'
- cd $(RESULT)/$(PLATFORM) && tar -czf $@ *
- touch $@
+tars : all $(TARFILES)
+onlytars : $(TARFILES)
+%.tar.gz :
+ @echo 'Creating compiler package $@'
+ cd $(RESULT)/$(PLATFORM) && tar -czf $@ *
+ touch $@
-clean :
+clean :
rm -rf build result
-FORCE :
-.PHONY : $(configs) $(platforms)
-
-
+FORCE :
+.PHONY : $(configs) $(platforms)
--- a/common/makefiles/devkit/Tools.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/devkit/Tools.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -26,15 +26,15 @@
##########################################################################################
#
# Workhorse makefile for creating ONE cross compiler
-# Needs either to be from BUILD -> BUILD OR have
+# Needs either to be from BUILD -> BUILD OR have
# BUILD -> HOST prebuilt
#
-# NOTE: There is a bug here. We don't limit the
-# PATH when building BUILD -> BUILD, which means that
+# NOTE: There is a bug here. We don't limit the
+# PATH when building BUILD -> BUILD, which means that
# if you configure after you've once build the BUILD->BUILD
# compiler THAT one will be picked up as the compiler for itself.
# This is not so great, especially if you did a partial delete
-# of the target tree.
+# of the target tree.
#
# Fix this...
#
@@ -43,45 +43,45 @@
$(info HOST=$(HOST))
$(info BUILD=$(BUILD))
-ARCH := $(word 1,$(subst -, ,$(TARGET)))
+ARCH := $(word 1,$(subst -, ,$(TARGET)))
##########################################################################################
# Define external dependencies
# Latest that could be made to work.
-gcc_ver := gcc-4.7.3
-binutils_ver := binutils-2.22
-ccache_ver := ccache-3.1.9
-mpfr_ver := mpfr-3.0.1
-gmp_ver := gmp-4.3.2
-mpc_ver := mpc-1.0.1
+gcc_ver := gcc-4.7.3
+binutils_ver := binutils-2.22
+ccache_ver := ccache-3.1.9
+mpfr_ver := mpfr-3.0.1
+gmp_ver := gmp-4.3.2
+mpc_ver := mpc-1.0.1
-GCC := http://ftp.gnu.org/pub/gnu/gcc/$(gcc_ver)/$(gcc_ver).tar.bz2
-BINUTILS := http://ftp.gnu.org/pub/gnu/binutils/$(binutils_ver).tar.bz2
-CCACHE := http://samba.org/ftp/ccache/$(ccache_ver).tar.gz
-MPFR := http://www.mpfr.org/${mpfr_ver}/${mpfr_ver}.tar.bz2
-GMP := http://ftp.gnu.org/pub/gnu/gmp/${gmp_ver}.tar.bz2
-MPC := http://www.multiprecision.org/mpc/download/${mpc_ver}.tar.gz
+GCC := http://ftp.gnu.org/pub/gnu/gcc/$(gcc_ver)/$(gcc_ver).tar.bz2
+BINUTILS := http://ftp.gnu.org/pub/gnu/binutils/$(binutils_ver).tar.bz2
+CCACHE := http://samba.org/ftp/ccache/$(ccache_ver).tar.gz
+MPFR := http://www.mpfr.org/${mpfr_ver}/${mpfr_ver}.tar.bz2
+GMP := http://ftp.gnu.org/pub/gnu/gmp/${gmp_ver}.tar.bz2
+MPC := http://www.multiprecision.org/mpc/download/${mpc_ver}.tar.gz
# RPMs in OEL5.5
-RPM_LIST := \
- kernel-headers \
- glibc-2 glibc-headers glibc-devel \
- cups-libs cups-devel \
- libX11 libX11-devel \
- xorg-x11-proto-devel \
- alsa-lib alsa-lib-devel \
- libXext libXext-devel \
- libXtst libXtst-devel \
- libXrender libXrender-devel \
- freetype freetype-devel \
- libXt libXt-devel \
- libSM libSM-devel \
- libICE libICE-devel \
- libXi libXi-devel \
- libXdmcp libXdmcp-devel \
- libXau libXau-devel \
- libgcc
+RPM_LIST := \
+ kernel-headers \
+ glibc-2 glibc-headers glibc-devel \
+ cups-libs cups-devel \
+ libX11 libX11-devel \
+ xorg-x11-proto-devel \
+ alsa-lib alsa-lib-devel \
+ libXext libXext-devel \
+ libXtst libXtst-devel \
+ libXrender libXrender-devel \
+ freetype freetype-devel \
+ libXt libXt-devel \
+ libSM libSM-devel \
+ libICE libICE-devel \
+ libXi libXi-devel \
+ libXdmcp libXdmcp-devel \
+ libXau libXau-devel \
+ libgcc
ifeq ($(ARCH),x86_64)
@@ -90,7 +90,7 @@
ifeq ($(BUILD),$(HOST))
ifeq ($(TARGET),$(HOST))
# When building the native compiler for x86_64, enable mixed mode.
- RPM_ARCHS += i386 i686
+ RPM_ARCHS += i386 i686
endif
endif
else
@@ -110,47 +110,47 @@
# Ensure we have 32-bit libs also for x64. We enable mixed-mode.
ifeq (x86_64,$(ARCH))
- LIBDIRS := lib64 lib
- CFLAGS_lib := -m32
+ LIBDIRS := lib64 lib
+ CFLAGS_lib := -m32
else
- LIBDIRS := lib
+ LIBDIRS := lib
endif
# Define directories
-RESULT := $(OUTPUT_ROOT)/result
-BUILDDIR := $(OUTPUT_ROOT)/$(HOST)/$(TARGET)
-PREFIX := $(RESULT)/$(HOST)
-TARGETDIR := $(PREFIX)/$(TARGET)
-SYSROOT := $(TARGETDIR)/sys-root
-DOWNLOAD := $(OUTPUT_ROOT)/download
-SRCDIR := $(OUTPUT_ROOT)/src
+RESULT := $(OUTPUT_ROOT)/result
+BUILDDIR := $(OUTPUT_ROOT)/$(HOST)/$(TARGET)
+PREFIX := $(RESULT)/$(HOST)
+TARGETDIR := $(PREFIX)/$(TARGET)
+SYSROOT := $(TARGETDIR)/sys-root
+DOWNLOAD := $(OUTPUT_ROOT)/download
+SRCDIR := $(OUTPUT_ROOT)/src
# Marker file for unpacking rpms
-rpms := $(SYSROOT)/rpms_unpacked
+rpms := $(SYSROOT)/rpms_unpacked
-# Need to patch libs that are linker scripts to use non-absolute paths
-libs := $(SYSROOT)/libs_patched
+# Need to patch libs that are linker scripts to use non-absolute paths
+libs := $(SYSROOT)/libs_patched
##########################################################################################
# Unpack source packages
-# Generate downloading + unpacking of sources.
+# Generate downloading + unpacking of sources.
define Download
-$(1)_DIR = $(abspath $(SRCDIR)/$(basename $(basename $(notdir $($(1))))))
-$(1)_CFG = $$($(1)_DIR)/configure
-$(1)_FILE = $(DOWNLOAD)/$(notdir $($(1)))
+ $(1)_DIR = $(abspath $(SRCDIR)/$(basename $(basename $(notdir $($(1))))))
+ $(1)_CFG = $$($(1)_DIR)/configure
+ $(1)_FILE = $(DOWNLOAD)/$(notdir $($(1)))
-$$($(1)_CFG) : $$($(1)_FILE)
- mkdir -p $$(SRCDIR)
- tar -C $$(SRCDIR) -x$$(if $$(findstring .gz, $$<),z,j)f $$<
- $$(foreach p,$$(abspath $$(wildcard $$(notdir $$($(1)_DIR)).patch)), \
- echo PATCHING $$(p) ; \
- patch -d $$($(1)_DIR) -p1 -i $$(p) ; \
- )
- touch $$@
+ $$($(1)_CFG) : $$($(1)_FILE)
+ mkdir -p $$(SRCDIR)
+ tar -C $$(SRCDIR) -x$$(if $$(findstring .gz, $$<),z,j)f $$<
+ $$(foreach p,$$(abspath $$(wildcard $$(notdir $$($(1)_DIR)).patch)), \
+ echo PATCHING $$(p) ; \
+ patch -d $$($(1)_DIR) -p1 -i $$(p) ; \
+ )
+ touch $$@
-$$($(1)_FILE) :
- wget -P $(DOWNLOAD) $$($(1))
+ $$($(1)_FILE) :
+ wget -P $(DOWNLOAD) $$($(1))
endef
# Download and unpack all source packages
@@ -159,48 +159,48 @@
##########################################################################################
# Unpack RPMS
-# Note. For building linux you should install rpm2cpio.
+# Note. For building linux you should install rpm2cpio.
define unrpm
-$(SYSROOT)/$(notdir $(1)).unpacked \
- : $(1)
-$$(rpms) : $(SYSROOT)/$(notdir $(1)).unpacked
+ $(SYSROOT)/$(notdir $(1)).unpacked \
+ : $(1)
+ $$(rpms) : $(SYSROOT)/$(notdir $(1)).unpacked
endef
-%.unpacked :
- $(info Unpacking target rpms and libraries from $<)
- @(mkdir -p $(@D); \
- cd $(@D); \
- rpm2cpio $< | \
- cpio --extract --make-directories \
- -f \
- "./usr/share/doc/*" \
- "./usr/share/man/*" \
- "./usr/X11R6/man/*" \
- "*/X11/locale/*" \
- || die ; )
- touch $@
+%.unpacked :
+ $(info Unpacking target rpms and libraries from $<)
+ @(mkdir -p $(@D); \
+ cd $(@D); \
+ rpm2cpio $< | \
+ cpio --extract --make-directories \
+ -f \
+ "./usr/share/doc/*" \
+ "./usr/share/man/*" \
+ "./usr/X11R6/man/*" \
+ "*/X11/locale/*" \
+ || die ; )
+ touch $@
$(foreach p,$(RPM_FILE_LIST),$(eval $(call unrpm,$(p))))
##########################################################################################
-# Note: MUST create a <sys-root>/usr/lib even if not really needed.
-# gcc will use a path relative to it to resolve lib64. (x86_64).
-# we're creating multi-lib compiler with 32bit libc as well, so we should
+# Note: MUST create a <sys-root>/usr/lib even if not really needed.
+# gcc will use a path relative to it to resolve lib64. (x86_64).
+# we're creating multi-lib compiler with 32bit libc as well, so we should
# have it anyway, but just to make sure...
# Patch libc.so and libpthread.so to force linking against libraries in sysroot
# and not the ones installed on the build machine.
-$(libs) : $(rpms)
- @echo Patching libc and pthreads
- @(for f in `find $(SYSROOT) -name libc.so -o -name libpthread.so`; do \
- (cat $$f | sed -e 's|/usr/lib64/||g' \
- -e 's|/usr/lib/||g' \
- -e 's|/lib64/||g' \
- -e 's|/lib/||g' ) > $$f.tmp ; \
- mv $$f.tmp $$f ; \
- done)
- @mkdir -p $(SYSROOT)/usr/lib
- @touch $@
+$(libs) : $(rpms)
+ @echo Patching libc and pthreads
+ @(for f in `find $(SYSROOT) -name libc.so -o -name libpthread.so`; do \
+ (cat $$f | sed -e 's|/usr/lib64/||g' \
+ -e 's|/usr/lib/||g' \
+ -e 's|/lib64/||g' \
+ -e 's|/lib/||g' ) > $$f.tmp ; \
+ mv $$f.tmp $$f ; \
+ done)
+ @mkdir -p $(SYSROOT)/usr/lib
+ @touch $@
##########################################################################################
@@ -210,264 +210,264 @@
##########################################################################################
# Default base config
-CONFIG = --target=$(TARGET) \
- --host=$(HOST) --build=$(BUILD) \
- --prefix=$(PREFIX)
+CONFIG = --target=$(TARGET) \
+ --host=$(HOST) --build=$(BUILD) \
+ --prefix=$(PREFIX)
-PATHEXT = $(RESULT)/$(BUILD)/bin:
+PATHEXT = $(RESULT)/$(BUILD)/bin:
-PATHPRE = PATH=$(PATHEXT)$(PATH)
-BUILDPAR = -j16
+PATHPRE = PATH=$(PATHEXT)$(PATH)
+BUILDPAR = -j16
# Default commands to when making
-MAKECMD =
-INSTALLCMD = install
+MAKECMD =
+INSTALLCMD = install
-declare_tools = CC$(1)=$(2)gcc LD$(1)=$(2)ld AR$(1)=$(2)ar AS$(1)=$(2)as RANLIB$(1)=$(2)ranlib CXX$(1)=$(2)g++ OBJDUMP$(1)=$(2)objdump
+declare_tools = CC$(1)=$(2)gcc LD$(1)=$(2)ld AR$(1)=$(2)ar AS$(1)=$(2)as RANLIB$(1)=$(2)ranlib CXX$(1)=$(2)g++ OBJDUMP$(1)=$(2)objdump
ifeq ($(HOST),$(BUILD))
-ifeq ($(HOST),$(TARGET))
-TOOLS = $(call declare_tools,_FOR_TARGET,)
-endif
+ ifeq ($(HOST),$(TARGET))
+ TOOLS = $(call declare_tools,_FOR_TARGET,)
+ endif
endif
-TOOLS ?= $(call declare_tools,_FOR_TARGET,$(TARGET)-)
+TOOLS ?= $(call declare_tools,_FOR_TARGET,$(TARGET)-)
##########################################################################################
-# Create a TARGET bfd + libiberty only.
+# Create a TARGET bfd + libiberty only.
# Configure one or two times depending on mulitlib arch.
-# If multilib, the second should be 32-bit, and we resolve
+# If multilib, the second should be 32-bit, and we resolve
# CFLAG_<name> to most likely -m32.
define mk_bfd
-$$(info Libs for $(1))
-$$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
- : CFLAGS += $$(CFLAGS_$(1))
-$$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
- : LIBDIRS = --libdir=$(TARGETDIR)/$(1)
+ $$(info Libs for $(1))
+ $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
+ : CFLAGS += $$(CFLAGS_$(1))
+ $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile \
+ : LIBDIRS = --libdir=$(TARGETDIR)/$(1)
-bfdlib += $$(TARGETDIR)/$$(binutils_ver)-$(subst /,-,$(1)).done
-bfdmakes += $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile
+ bfdlib += $$(TARGETDIR)/$$(binutils_ver)-$(subst /,-,$(1)).done
+ bfdmakes += $$(BUILDDIR)/$$(binutils_ver)-$(subst /,-,$(1))/Makefile
endef
# Create one set of bfds etc for each multilib arch
$(foreach l,$(LIBDIRS),$(eval $(call mk_bfd,$(l))))
# Only build these two libs.
-$(bfdlib) : MAKECMD = all-libiberty all-bfd
-$(bfdlib) : INSTALLCMD = install-libiberty install-bfd
+$(bfdlib) : MAKECMD = all-libiberty all-bfd
+$(bfdlib) : INSTALLCMD = install-libiberty install-bfd
-# Building targets libbfd + libiberty. HOST==TARGET, i.e not
-# for a cross env.
-$(bfdmakes) : CONFIG = --target=$(TARGET) \
- --host=$(TARGET) --build=$(BUILD) \
- --prefix=$(TARGETDIR) \
- --with-sysroot=$(SYSROOT) \
- $(LIBDIRS)
+# Building targets libbfd + libiberty. HOST==TARGET, i.e not
+# for a cross env.
+$(bfdmakes) : CONFIG = --target=$(TARGET) \
+ --host=$(TARGET) --build=$(BUILD) \
+ --prefix=$(TARGETDIR) \
+ --with-sysroot=$(SYSROOT) \
+ $(LIBDIRS)
-$(bfdmakes) : TOOLS = $(call declare_tools,_FOR_TARGET,$(TARGET)-) $(call declare_tools,,$(TARGET)-)
+$(bfdmakes) : TOOLS = $(call declare_tools,_FOR_TARGET,$(TARGET)-) $(call declare_tools,,$(TARGET)-)
##########################################################################################
-$(gcc) \
-$(binutils) \
-$(gmp) \
-$(mpfr) \
-$(mpc) \
-$(bfdmakes) \
-$(ccache) : ENVS += $(TOOLS)
+$(gcc) \
+ $(binutils) \
+ $(gmp) \
+ $(mpfr) \
+ $(mpc) \
+ $(bfdmakes) \
+ $(ccache) : ENVS += $(TOOLS)
# libdir to work around hateful bfd stuff installing into wrong dirs...
-# ensure we have 64 bit bfd support in the HOST library. I.e our
+# ensure we have 64 bit bfd support in the HOST library. I.e our
# compiler on i686 will know 64 bit symbols, BUT later
-# we build just the libs again for TARGET, then with whatever the arch
+# we build just the libs again for TARGET, then with whatever the arch
# wants.
$(BUILDDIR)/$(binutils_ver)/Makefile : CONFIG += --enable-64-bit-bfd --libdir=$(PREFIX)/$(word 1,$(LIBDIRS))
# Makefile creation. Simply run configure in build dir.
-$(bfdmakes) \
-$(BUILDDIR)/$(binutils_ver)/Makefile \
- : $(BINUTILS_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(BINUTILS_CFG) \
- $(CONFIG) \
- --with-sysroot=$(SYSROOT) \
- --disable-nls \
- --program-prefix=$(TARGET)- \
- --enable-multilib \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+$(bfdmakes) \
+$(BUILDDIR)/$(binutils_ver)/Makefile \
+ : $(BINUTILS_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ @mkdir -p $(@D)
+ ( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
+ $(BINUTILS_CFG) \
+ $(CONFIG) \
+ --with-sysroot=$(SYSROOT) \
+ --disable-nls \
+ --program-prefix=$(TARGET)- \
+ --enable-multilib \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
-$(BUILDDIR)/$(mpfr_ver)/Makefile \
- : $(MPFR_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(MPFR_CFG) \
- $(CONFIG) \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-gmp=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+$(BUILDDIR)/$(mpfr_ver)/Makefile \
+ : $(MPFR_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ @mkdir -p $(@D)
+ ( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
+ $(MPFR_CFG) \
+ $(CONFIG) \
+ --program-prefix=$(TARGET)- \
+ --enable-shared=no \
+ --with-gmp=$(PREFIX) \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
-$(BUILDDIR)/$(gmp_ver)/Makefile \
- : $(GMP_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(GMP_CFG) \
- --host=$(HOST) --build=$(BUILD) \
- --prefix=$(PREFIX) \
- --disable-nls \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-mpfr=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+$(BUILDDIR)/$(gmp_ver)/Makefile \
+ : $(GMP_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ @mkdir -p $(@D)
+ ( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
+ $(GMP_CFG) \
+ --host=$(HOST) --build=$(BUILD) \
+ --prefix=$(PREFIX) \
+ --disable-nls \
+ --program-prefix=$(TARGET)- \
+ --enable-shared=no \
+ --with-mpfr=$(PREFIX) \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
-$(BUILDDIR)/$(mpc_ver)/Makefile \
- : $(MPC_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
- $(MPC_CFG) \
- $(CONFIG) \
- --program-prefix=$(TARGET)- \
- --enable-shared=no \
- --with-mpfr=$(PREFIX) \
- --with-gmp=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+$(BUILDDIR)/$(mpc_ver)/Makefile \
+ : $(MPC_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ @mkdir -p $(@D)
+ ( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) CFLAGS="$(CFLAGS)" \
+ $(MPC_CFG) \
+ $(CONFIG) \
+ --program-prefix=$(TARGET)- \
+ --enable-shared=no \
+ --with-mpfr=$(PREFIX) \
+ --with-gmp=$(PREFIX) \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
# Only valid if glibc target -> linux
# proper destructor handling for c++
ifneq (,$(findstring linux,$(TARGET)))
-$(BUILDDIR)/$(gcc_ver)/Makefile : CONFIG += --enable-__cxa_atexit
+ $(BUILDDIR)/$(gcc_ver)/Makefile : CONFIG += --enable-__cxa_atexit
endif
# Want:
-# c,c++
-# shared libs
-# multilib (-m32/-m64 on x64)
-# skip native language.
-# and link and assemble with the binutils we created
-# earlier, so --with-gnu*
-$(BUILDDIR)/$(gcc_ver)/Makefile \
- : $(GCC_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- mkdir -p $(@D)
- ( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) $(GCC_CFG) $(EXTRA_CFLAGS) \
- $(CONFIG) \
- --with-sysroot=$(SYSROOT) \
- --enable-languages=c,c++ \
- --enable-shared \
- --enable-multilib \
- --disable-nls \
- --with-gnu-as \
- --with-gnu-ld \
- --with-mpfr=$(PREFIX) \
- --with-gmp=$(PREFIX) \
- --with-mpc=$(PREFIX) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+# c,c++
+# shared libs
+# multilib (-m32/-m64 on x64)
+# skip native language.
+# and link and assemble with the binutils we created
+# earlier, so --with-gnu*
+$(BUILDDIR)/$(gcc_ver)/Makefile \
+ : $(GCC_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ mkdir -p $(@D)
+ ( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) $(GCC_CFG) $(EXTRA_CFLAGS) \
+ $(CONFIG) \
+ --with-sysroot=$(SYSROOT) \
+ --enable-languages=c,c++ \
+ --enable-shared \
+ --enable-multilib \
+ --disable-nls \
+ --with-gnu-as \
+ --with-gnu-ld \
+ --with-mpfr=$(PREFIX) \
+ --with-gmp=$(PREFIX) \
+ --with-mpc=$(PREFIX) \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
# need binutils for gcc
-$(gcc) : $(binutils)
+$(gcc) : $(binutils)
# as of 4.3 or so need these for doing config
$(BUILDDIR)/$(gcc_ver)/Makefile : $(gmp) $(mpfr) $(mpc)
-$(mpfr) : $(gmp)
-$(mpc) : $(gmp) $(mpfr)
+$(mpfr) : $(gmp)
+$(mpc) : $(gmp) $(mpfr)
##########################################################################################
-# very straightforward. just build a ccache. it is only for host.
-$(BUILDDIR)/$(ccache_ver)/Makefile \
- : $(CCACHE_CFG)
- $(info Configuring $@. Log in $(@D)/log.config)
- @mkdir -p $(@D)
- @( \
- cd $(@D) ; \
- $(PATHPRE) $(ENVS) $(CCACHE_CFG) \
- $(CONFIG) \
- ) > $(@D)/log.config 2>&1
- @echo 'done'
+# very straightforward. just build a ccache. it is only for host.
+$(BUILDDIR)/$(ccache_ver)/Makefile \
+ : $(CCACHE_CFG)
+ $(info Configuring $@. Log in $(@D)/log.config)
+ @mkdir -p $(@D)
+ @( \
+ cd $(@D) ; \
+ $(PATHPRE) $(ENVS) $(CCACHE_CFG) \
+ $(CONFIG) \
+ ) > $(@D)/log.config 2>&1
+ @echo 'done'
-gccpatch = $(TARGETDIR)/gcc-patched
+gccpatch = $(TARGETDIR)/gcc-patched
##########################################################################################
-# For some reason cpp is not created as a target-compiler
+# For some reason cpp is not created as a target-compiler
ifeq ($(HOST),$(TARGET))
-$(gccpatch) : $(gcc) link_libs
- @echo -n 'Creating compiler symlinks...'
- @for f in cpp; do \
- if [ ! -e $(PREFIX)/bin/$(TARGET)-$$f ];\
- then \
- cd $(PREFIX)/bin && \
- ln -s $$f $(TARGET)-$$f ; \
- fi \
- done
- @touch $@
- @echo 'done'
+ $(gccpatch) : $(gcc) link_libs
+ @echo -n 'Creating compiler symlinks...'
+ @for f in cpp; do \
+ if [ ! -e $(PREFIX)/bin/$(TARGET)-$$f ]; \
+ then \
+ cd $(PREFIX)/bin && \
+ ln -s $$f $(TARGET)-$$f ; \
+ fi \
+ done
+ @touch $@
+ @echo 'done'
-##########################################################################################
-# Ugly at best. Seems that when we compile host->host compiler, that are NOT
-# the BUILD compiler, the result will not try searching for libs in package root.
-# "Solve" this by create links from the target libdirs to where they are.
-link_libs:
- @echo -n 'Creating library symlinks...'
- @$(foreach l,$(LIBDIRS), \
- for f in `cd $(PREFIX)/$(l) && ls`; do \
- if [ ! -e $(TARGETDIR)/$(l)/$$f ]; then \
- mkdir -p $(TARGETDIR)/$(l) && \
- cd $(TARGETDIR)/$(l)/ && \
- ln -s $(if $(findstring /,$(l)),../,)../../$(l)/$$f $$f; \
- fi \
- done;)
- @echo 'done'
+ ##########################################################################################
+ # Ugly at best. Seems that when we compile host->host compiler, that are NOT
+ # the BUILD compiler, the result will not try searching for libs in package root.
+ # "Solve" this by create links from the target libdirs to where they are.
+ link_libs:
+ @echo -n 'Creating library symlinks...'
+ @$(foreach l,$(LIBDIRS), \
+ for f in `cd $(PREFIX)/$(l) && ls`; do \
+ if [ ! -e $(TARGETDIR)/$(l)/$$f ]; then \
+ mkdir -p $(TARGETDIR)/$(l) && \
+ cd $(TARGETDIR)/$(l)/ && \
+ ln -s $(if $(findstring /,$(l)),../,)../../$(l)/$$f $$f; \
+ fi \
+ done;)
+ @echo 'done'
else
-$(gccpatch) :
- @echo 'done'
+ $(gccpatch) :
+ @echo 'done'
endif
##########################################################################################
-# Build in two steps.
+# Build in two steps.
# make <default>
-# make install.
+# make install.
# Use path to our build hosts cross tools
-# Always need to build cross tools for build host self.
-$(TARGETDIR)/%.done : $(BUILDDIR)/%/Makefile
- $(info Building $(basename $@). Log in $(<D)/log.build)
- $(PATHPRE) $(ENVS) $(MAKE) $(BUILDPAR) -f $< -C $(<D) $(MAKECMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.build 2>&1
- @echo -n 'installing...'
- $(PATHPRE) $(MAKE) $(INSTALLPAR) -f $< -C $(<D) $(INSTALLCMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.install 2>&1
- @touch $@
- @echo 'done'
+# Always need to build cross tools for build host self.
+$(TARGETDIR)/%.done : $(BUILDDIR)/%/Makefile
+ $(info Building $(basename $@). Log in $(<D)/log.build)
+ $(PATHPRE) $(ENVS) $(MAKE) $(BUILDPAR) -f $< -C $(<D) $(MAKECMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.build 2>&1
+ @echo -n 'installing...'
+ $(PATHPRE) $(MAKE) $(INSTALLPAR) -f $< -C $(<D) $(INSTALLCMD) $(MAKECMD.$(notdir $@)) > $(<D)/log.install 2>&1
+ @touch $@
+ @echo 'done'
##########################################################################################
-bfdlib : $(bfdlib)
-binutils : $(binutils)
-rpms : $(rpms)
-libs : $(libs)
-sysroot : rpms libs
-gcc : sysroot $(gcc) $(gccpatch)
-all : binutils gcc bfdlib
+bfdlib : $(bfdlib)
+binutils : $(binutils)
+rpms : $(rpms)
+libs : $(libs)
+sysroot : rpms libs
+gcc : sysroot $(gcc) $(gccpatch)
+all : binutils gcc bfdlib
-# this is only built for host. so separate.
-ccache : $(ccache)
+# this is only built for host. so separate.
+ccache : $(ccache)
-.PHONY : gcc all binutils bfdlib link_libs rpms libs sysroot
+.PHONY : gcc all binutils bfdlib link_libs rpms libs sysroot
--- a/common/makefiles/javadoc/CORE_PKGS.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/javadoc/CORE_PKGS.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -24,49 +24,49 @@
#
# EXCLUDE_PKGS is the list of packages to exclude from the
-# Java API Specification. Do not add these to CORE_PKGS.
+# Java API Specification. Do not add these to CORE_PKGS.
# The concatenation of EXCLUDE_PKGS and CORE_PKGS
# should make up the list of all packages under the
# src/shared/classes directory of the JDK source tree.
#
-EXCLUDE_PKGS = \
- java.awt.peer \
- java.awt.dnd.peer \
- sun.* \
- com.sun.* \
- org.apache.* \
- org.jcp.* \
- org.w3c.dom.css \
- org.w3c.dom.html \
- org.w3c.dom.stylesheets \
- org.w3c.dom.traversal \
- org.w3c.dom.ranges \
- org.w3c.dom.views \
- org.omg.stub.javax.management.remote.rmi
+EXCLUDE_PKGS = \
+ java.awt.peer \
+ java.awt.dnd.peer \
+ sun.* \
+ com.sun.* \
+ org.apache.* \
+ org.jcp.* \
+ org.w3c.dom.css \
+ org.w3c.dom.html \
+ org.w3c.dom.stylesheets \
+ org.w3c.dom.traversal \
+ org.w3c.dom.ranges \
+ org.w3c.dom.views \
+ org.omg.stub.javax.management.remote.rmi
#
# ACTIVE_JSR_PKGS are packages that are part of an active JSR process--
# one that is doing its own review. These packages are not included when
# creating diff pages for the platform's JCP process.
-#
-# (see /java/pubs/apisrc/jdk/6.0/beta/make/docs/active_jsr_pkgs)
+#
+# (see /java/pubs/apisrc/jdk/6.0/beta/make/docs/active_jsr_pkgs)
# Note:
# This is a list of regular expressions. So foo.* matches "foo" and "foo.bar".
#
ACTIVE_JSR_PKGS= \
- java.lang.invoke \
- java.sql \
- javax.activation \
- javax.annotation.* \
- javax.jws.* \
- javax.lang.* \
- javax.management.* \
- javax.script \
- javax.sql.* \
- javax.tools.* \
- javax.xml.* \
- org.w3c.* \
- org.xml.sax
+ java.lang.invoke \
+ java.sql \
+ javax.activation \
+ javax.annotation.* \
+ javax.jws.* \
+ javax.lang.* \
+ javax.management.* \
+ javax.script \
+ javax.sql.* \
+ javax.tools.* \
+ javax.xml.* \
+ org.w3c.* \
+ org.xml.sax
#
# CORE_PKGS is the list of packages that form the
@@ -77,224 +77,224 @@
### determines which table the packages go in on the main page.
### Currently, there is only table ("Platform Packages") and
### everything goes in it, so REGEXP is "*". But if that policy
-### changes, packages added will need to be reflected in that
+### changes, packages added will need to be reflected in that
### list of wildcard expressions, as well.
###
-CORE_PKGS = \
- java.applet \
- java.awt \
- java.awt.color \
- java.awt.datatransfer \
- java.awt.dnd \
- java.awt.event \
- java.awt.font \
- java.awt.geom \
- java.awt.im \
- java.awt.im.spi \
- java.awt.image \
- java.awt.image.renderable \
- java.awt.print \
- java.beans \
- java.beans.beancontext \
- java.io \
- java.lang \
- java.lang.annotation \
- java.lang.instrument \
- java.lang.invoke \
- java.lang.management \
- java.lang.ref \
- java.lang.reflect \
- java.math \
- java.net \
- java.nio \
- java.nio.channels \
- java.nio.channels.spi \
- java.nio.charset \
- java.nio.charset.spi \
- java.nio.file \
- java.nio.file.attribute \
- java.nio.file.spi \
- java.rmi \
- java.rmi.activation \
- java.rmi.dgc \
- java.rmi.registry \
- java.rmi.server \
- java.security \
- java.security.acl \
- java.security.cert \
- java.security.interfaces \
- java.security.spec \
- java.sql \
- java.text \
- java.text.spi \
- java.time \
- java.time.chrono \
- java.time.format \
- java.time.temporal \
- java.time.zone \
- java.util \
- java.util.concurrent \
- java.util.concurrent.atomic \
- java.util.concurrent.locks \
- java.util.function \
- java.util.jar \
- java.util.logging \
- java.util.prefs \
- java.util.regex \
- java.util.spi \
- java.util.stream \
- java.util.zip \
- javax.accessibility \
- javax.activation \
- javax.activity \
- javax.annotation \
- javax.annotation.processing \
- javax.crypto \
- javax.crypto.interfaces \
- javax.crypto.spec \
- javax.imageio \
- javax.imageio.event \
- javax.imageio.metadata \
- javax.imageio.plugins.jpeg \
- javax.imageio.plugins.bmp \
- javax.imageio.spi \
- javax.imageio.stream \
- javax.jws \
- javax.jws.soap \
- javax.lang.model \
- javax.lang.model.element \
- javax.lang.model.type \
- javax.lang.model.util \
- javax.management \
- javax.management.loading \
- javax.management.monitor \
- javax.management.relation \
- javax.management.openmbean \
- javax.management.timer \
- javax.management.modelmbean \
- javax.management.remote \
- javax.management.remote.rmi \
- javax.naming \
- javax.naming.directory \
- javax.naming.event \
- javax.naming.ldap \
- javax.naming.spi \
- javax.net \
- javax.net.ssl \
- javax.print \
- javax.print.attribute \
- javax.print.attribute.standard \
- javax.print.event \
- javax.rmi \
- javax.rmi.CORBA \
- javax.rmi.ssl \
- javax.script \
- javax.security.auth \
- javax.security.auth.callback \
- javax.security.auth.kerberos \
- javax.security.auth.login \
- javax.security.auth.spi \
- javax.security.auth.x500 \
- javax.security.cert \
- javax.security.sasl \
- javax.sound.sampled \
- javax.sound.sampled.spi \
- javax.sound.midi \
- javax.sound.midi.spi \
- javax.sql \
- javax.sql.rowset \
- javax.sql.rowset.serial \
- javax.sql.rowset.spi \
- javax.swing \
- javax.swing.border \
- javax.swing.colorchooser \
- javax.swing.filechooser \
- javax.swing.event \
- javax.swing.table \
- javax.swing.text \
- javax.swing.text.html \
- javax.swing.text.html.parser \
- javax.swing.text.rtf \
- javax.swing.tree \
- javax.swing.undo \
- javax.swing.plaf \
- javax.swing.plaf.basic \
- javax.swing.plaf.metal \
- javax.swing.plaf.multi \
- javax.swing.plaf.nimbus \
- javax.swing.plaf.synth \
- javax.tools \
- javax.tools.annotation \
- javax.transaction \
- javax.transaction.xa \
- javax.xml.parsers \
- javax.xml.bind \
- javax.xml.bind.annotation \
- javax.xml.bind.annotation.adapters \
- javax.xml.bind.attachment \
- javax.xml.bind.helpers \
- javax.xml.bind.util \
- javax.xml.soap \
- javax.xml.ws \
- javax.xml.ws.handler \
- javax.xml.ws.handler.soap \
- javax.xml.ws.http \
- javax.xml.ws.soap \
- javax.xml.ws.spi \
- javax.xml.ws.spi.http \
- javax.xml.ws.wsaddressing \
- javax.xml.transform \
- javax.xml.transform.sax \
- javax.xml.transform.dom \
- javax.xml.transform.stax \
- javax.xml.transform.stream \
- javax.xml \
- javax.xml.crypto \
- javax.xml.crypto.dom \
- javax.xml.crypto.dsig \
- javax.xml.crypto.dsig.dom \
- javax.xml.crypto.dsig.keyinfo \
- javax.xml.crypto.dsig.spec \
- javax.xml.datatype \
- javax.xml.validation \
- javax.xml.namespace \
- javax.xml.xpath \
- javax.xml.stream \
- javax.xml.stream.events \
- javax.xml.stream.util \
- org.ietf.jgss \
- org.omg.CORBA \
- org.omg.CORBA.DynAnyPackage \
- org.omg.CORBA.ORBPackage \
- org.omg.CORBA.TypeCodePackage \
- org.omg.stub.java.rmi \
- org.omg.CORBA.portable \
- org.omg.CORBA_2_3 \
- org.omg.CORBA_2_3.portable \
- org.omg.CosNaming \
- org.omg.CosNaming.NamingContextExtPackage \
- org.omg.CosNaming.NamingContextPackage \
- org.omg.SendingContext \
- org.omg.PortableServer \
- org.omg.PortableServer.CurrentPackage \
- org.omg.PortableServer.POAPackage \
- org.omg.PortableServer.POAManagerPackage \
- org.omg.PortableServer.ServantLocatorPackage \
- org.omg.PortableServer.portable \
- org.omg.PortableInterceptor \
- org.omg.PortableInterceptor.ORBInitInfoPackage \
- org.omg.Messaging \
- org.omg.IOP \
- org.omg.IOP.CodecFactoryPackage \
- org.omg.IOP.CodecPackage \
- org.omg.Dynamic \
- org.omg.DynamicAny \
- org.omg.DynamicAny.DynAnyPackage \
- org.omg.DynamicAny.DynAnyFactoryPackage \
- org.w3c.dom \
- org.w3c.dom.events \
- org.w3c.dom.bootstrap \
- org.w3c.dom.ls \
- org.xml.sax \
- org.xml.sax.ext \
- org.xml.sax.helpers
+CORE_PKGS = \
+ java.applet \
+ java.awt \
+ java.awt.color \
+ java.awt.datatransfer \
+ java.awt.dnd \
+ java.awt.event \
+ java.awt.font \
+ java.awt.geom \
+ java.awt.im \
+ java.awt.im.spi \
+ java.awt.image \
+ java.awt.image.renderable \
+ java.awt.print \
+ java.beans \
+ java.beans.beancontext \
+ java.io \
+ java.lang \
+ java.lang.annotation \
+ java.lang.instrument \
+ java.lang.invoke \
+ java.lang.management \
+ java.lang.ref \
+ java.lang.reflect \
+ java.math \
+ java.net \
+ java.nio \
+ java.nio.channels \
+ java.nio.channels.spi \
+ java.nio.charset \
+ java.nio.charset.spi \
+ java.nio.file \
+ java.nio.file.attribute \
+ java.nio.file.spi \
+ java.rmi \
+ java.rmi.activation \
+ java.rmi.dgc \
+ java.rmi.registry \
+ java.rmi.server \
+ java.security \
+ java.security.acl \
+ java.security.cert \
+ java.security.interfaces \
+ java.security.spec \
+ java.sql \
+ java.text \
+ java.text.spi \
+ java.time \
+ java.time.chrono \
+ java.time.format \
+ java.time.temporal \
+ java.time.zone \
+ java.util \
+ java.util.concurrent \
+ java.util.concurrent.atomic \
+ java.util.concurrent.locks \
+ java.util.function \
+ java.util.jar \
+ java.util.logging \
+ java.util.prefs \
+ java.util.regex \
+ java.util.spi \
+ java.util.stream \
+ java.util.zip \
+ javax.accessibility \
+ javax.activation \
+ javax.activity \
+ javax.annotation \
+ javax.annotation.processing \
+ javax.crypto \
+ javax.crypto.interfaces \
+ javax.crypto.spec \
+ javax.imageio \
+ javax.imageio.event \
+ javax.imageio.metadata \
+ javax.imageio.plugins.jpeg \
+ javax.imageio.plugins.bmp \
+ javax.imageio.spi \
+ javax.imageio.stream \
+ javax.jws \
+ javax.jws.soap \
+ javax.lang.model \
+ javax.lang.model.element \
+ javax.lang.model.type \
+ javax.lang.model.util \
+ javax.management \
+ javax.management.loading \
+ javax.management.monitor \
+ javax.management.relation \
+ javax.management.openmbean \
+ javax.management.timer \
+ javax.management.modelmbean \
+ javax.management.remote \
+ javax.management.remote.rmi \
+ javax.naming \
+ javax.naming.directory \
+ javax.naming.event \
+ javax.naming.ldap \
+ javax.naming.spi \
+ javax.net \
+ javax.net.ssl \
+ javax.print \
+ javax.print.attribute \
+ javax.print.attribute.standard \
+ javax.print.event \
+ javax.rmi \
+ javax.rmi.CORBA \
+ javax.rmi.ssl \
+ javax.script \
+ javax.security.auth \
+ javax.security.auth.callback \
+ javax.security.auth.kerberos \
+ javax.security.auth.login \
+ javax.security.auth.spi \
+ javax.security.auth.x500 \
+ javax.security.cert \
+ javax.security.sasl \
+ javax.sound.sampled \
+ javax.sound.sampled.spi \
+ javax.sound.midi \
+ javax.sound.midi.spi \
+ javax.sql \
+ javax.sql.rowset \
+ javax.sql.rowset.serial \
+ javax.sql.rowset.spi \
+ javax.swing \
+ javax.swing.border \
+ javax.swing.colorchooser \
+ javax.swing.filechooser \
+ javax.swing.event \
+ javax.swing.table \
+ javax.swing.text \
+ javax.swing.text.html \
+ javax.swing.text.html.parser \
+ javax.swing.text.rtf \
+ javax.swing.tree \
+ javax.swing.undo \
+ javax.swing.plaf \
+ javax.swing.plaf.basic \
+ javax.swing.plaf.metal \
+ javax.swing.plaf.multi \
+ javax.swing.plaf.nimbus \
+ javax.swing.plaf.synth \
+ javax.tools \
+ javax.tools.annotation \
+ javax.transaction \
+ javax.transaction.xa \
+ javax.xml.parsers \
+ javax.xml.bind \
+ javax.xml.bind.annotation \
+ javax.xml.bind.annotation.adapters \
+ javax.xml.bind.attachment \
+ javax.xml.bind.helpers \
+ javax.xml.bind.util \
+ javax.xml.soap \
+ javax.xml.ws \
+ javax.xml.ws.handler \
+ javax.xml.ws.handler.soap \
+ javax.xml.ws.http \
+ javax.xml.ws.soap \
+ javax.xml.ws.spi \
+ javax.xml.ws.spi.http \
+ javax.xml.ws.wsaddressing \
+ javax.xml.transform \
+ javax.xml.transform.sax \
+ javax.xml.transform.dom \
+ javax.xml.transform.stax \
+ javax.xml.transform.stream \
+ javax.xml \
+ javax.xml.crypto \
+ javax.xml.crypto.dom \
+ javax.xml.crypto.dsig \
+ javax.xml.crypto.dsig.dom \
+ javax.xml.crypto.dsig.keyinfo \
+ javax.xml.crypto.dsig.spec \
+ javax.xml.datatype \
+ javax.xml.validation \
+ javax.xml.namespace \
+ javax.xml.xpath \
+ javax.xml.stream \
+ javax.xml.stream.events \
+ javax.xml.stream.util \
+ org.ietf.jgss \
+ org.omg.CORBA \
+ org.omg.CORBA.DynAnyPackage \
+ org.omg.CORBA.ORBPackage \
+ org.omg.CORBA.TypeCodePackage \
+ org.omg.stub.java.rmi \
+ org.omg.CORBA.portable \
+ org.omg.CORBA_2_3 \
+ org.omg.CORBA_2_3.portable \
+ org.omg.CosNaming \
+ org.omg.CosNaming.NamingContextExtPackage \
+ org.omg.CosNaming.NamingContextPackage \
+ org.omg.SendingContext \
+ org.omg.PortableServer \
+ org.omg.PortableServer.CurrentPackage \
+ org.omg.PortableServer.POAPackage \
+ org.omg.PortableServer.POAManagerPackage \
+ org.omg.PortableServer.ServantLocatorPackage \
+ org.omg.PortableServer.portable \
+ org.omg.PortableInterceptor \
+ org.omg.PortableInterceptor.ORBInitInfoPackage \
+ org.omg.Messaging \
+ org.omg.IOP \
+ org.omg.IOP.CodecFactoryPackage \
+ org.omg.IOP.CodecPackage \
+ org.omg.Dynamic \
+ org.omg.DynamicAny \
+ org.omg.DynamicAny.DynAnyPackage \
+ org.omg.DynamicAny.DynAnyFactoryPackage \
+ org.w3c.dom \
+ org.w3c.dom.events \
+ org.w3c.dom.bootstrap \
+ org.w3c.dom.ls \
+ org.xml.sax \
+ org.xml.sax.ext \
+ org.xml.sax.helpers
--- a/common/makefiles/javadoc/Javadoc.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/javadoc/Javadoc.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -47,31 +47,31 @@
BUILD_NUMBER=$(JDK_BUILD_NUMBER)
JAVADOC_CMD = $(JAVA) \
- -Xmx1024m \
- -Djava.awt.headless=true \
- $(NEW_JAVADOC) \
- -bootclasspath $(JDK_OUTPUTDIR)/classes
+ -Xmx1024m \
+ -Djava.awt.headless=true \
+ $(NEW_JAVADOC) \
+ -bootclasspath $(JDK_OUTPUTDIR)/classes
# Copyright year for beginning of Java and some of the apis
-# (Needed when creating the javadocs)
-FIRST_COPYRIGHT_YEAR = 1993
-DOMAPI_FIRST_COPYRIGHT_YEAR = 2005
-MIRROR_FIRST_COPYRIGHT_YEAR = 2004
-DOCLETAPI_FIRST_COPYRIGHT_YEAR = 1993
-TAGLETAPI_FIRST_COPYRIGHT_YEAR = 1993
-JDI_FIRST_COPYRIGHT_YEAR = 1999
-JAAS_FIRST_COPYRIGHT_YEAR = 1998
-JGSS_FIRST_COPYRIGHT_YEAR = 2000
-SMARTCARDIO_FIRST_COPYRIGHT_YEAR = 2005
-HTTPSERVER_FIRST_COPYRIGHT_YEAR = 2005
-MGMT_FIRST_COPYRIGHT_YEAR = 2003
-ATTACH_FIRST_COPYRIGHT_YEAR = 2005
-JCONSOLE_FIRST_COPYRIGHT_YEAR = 2006
-SCTPAPI_FIRST_COPYRIGHT_YEAR = 2009
-TRACING_FIRST_COPYRIGHT_YEAR = 2008
-TREEAPI_FIRST_COPYRIGHT_YEAR = 2005
-JNLP_FIRST_COPYRIGHT_YEAR = 1998
-PLUGIN2_FIRST_COPYRIGHT_YEAR = 2007
+# (Needed when creating the javadocs)
+FIRST_COPYRIGHT_YEAR = 1993
+DOMAPI_FIRST_COPYRIGHT_YEAR = 2005
+MIRROR_FIRST_COPYRIGHT_YEAR = 2004
+DOCLETAPI_FIRST_COPYRIGHT_YEAR = 1993
+TAGLETAPI_FIRST_COPYRIGHT_YEAR = 1993
+JDI_FIRST_COPYRIGHT_YEAR = 1999
+JAAS_FIRST_COPYRIGHT_YEAR = 1998
+JGSS_FIRST_COPYRIGHT_YEAR = 2000
+SMARTCARDIO_FIRST_COPYRIGHT_YEAR = 2005
+HTTPSERVER_FIRST_COPYRIGHT_YEAR = 2005
+MGMT_FIRST_COPYRIGHT_YEAR = 2003
+ATTACH_FIRST_COPYRIGHT_YEAR = 2005
+JCONSOLE_FIRST_COPYRIGHT_YEAR = 2006
+SCTPAPI_FIRST_COPYRIGHT_YEAR = 2009
+TRACING_FIRST_COPYRIGHT_YEAR = 2008
+TREEAPI_FIRST_COPYRIGHT_YEAR = 2005
+JNLP_FIRST_COPYRIGHT_YEAR = 1998
+PLUGIN2_FIRST_COPYRIGHT_YEAR = 2007
# Oracle name
FULL_COMPANY_NAME = Oracle and/or its affiliates
@@ -83,15 +83,15 @@
TRADEMARK = ™
# Common copyright lines used
-# The word "Copyright" might optionally be a link to the file cpyr.html.
-# The first year of copyright may vary or not be available.
-# The address to the company might be optional.
+# The word "Copyright" might optionally be a link to the file cpyr.html.
+# The first year of copyright may vary or not be available.
+# The address to the company might be optional.
COMMA:= ,
EMPTY:=
SPACE:=$(EMPTY) $(EMPTY)
COPYRIGHT_SYMBOL = &\#x00a9;
# Macro to construct the copyright line
-# (The GNU make 3.78.1 "if" conditional is broken, fixed in GNU make 3.81)
+# (The GNU make 3.78.1 "if" conditional is broken, fixed in GNU make 3.81)
define CopyrightLine # optionalurl optionalfirstyear optionaladdress
$(if $(strip $1),<a href="$(strip $1)">Copyright</a>,Copyright) \
$(COPYRIGHT_SYMBOL) $(if $2,$2${COMMA},) $(COPYRIGHT_YEAR),\
@@ -114,7 +114,7 @@
BUG_SUBMIT_LINE = <a href="$(BUG_SUBMIT_URL)">Submit a bug or feature</a>
# Url to devdocs page
-# Was: http://java.sun.com/javase/6/webnotes/devdocs-vs-specs.html
+# Was: http://java.sun.com/javase/6/webnotes/devdocs-vs-specs.html
DEV_DOCS_URL-7 = http://download.oracle.com/javase/7/docs/index.html
# This isn't added in old build yet.
#DEV_DOCS_URL-8 = http://download.oracle.com/javase/7/docs/index.html
@@ -130,17 +130,17 @@
# List of all possible directories for javadoc to look for sources
-# NOTE: Quotes are required around sourcepath argument only on Windows.
-# Otherwise, you get "No packages or classes specified." due
-# to $(PATH_SEP) being interpreted as an end of
-# command (newline or shell ; character)
+# NOTE: Quotes are required around sourcepath argument only on Windows.
+# Otherwise, you get "No packages or classes specified." due
+# to $(PATH_SEP) being interpreted as an end of
+# command (newline or shell ; character)
ALL_SOURCE_DIRS = $(JDK_SHARE_CLASSES) \
- $(JDK_IMPSRC) \
- $(JDK_GENSRC) \
- $(JDK_OUTPUTDIR)/gendocsrc_rmic \
- $(JDK_TOPDIR)/src/solaris/classes \
- $(JDK_TOPDIR)/src/windows/classes \
- $(JDK_SHARE_SRC)/doc/stub
+ $(JDK_IMPSRC) \
+ $(JDK_GENSRC) \
+ $(JDK_OUTPUTDIR)/gendocsrc_rmic \
+ $(JDK_TOPDIR)/src/solaris/classes \
+ $(JDK_TOPDIR)/src/windows/classes \
+ $(JDK_SHARE_SRC)/doc/stub
# List of directories that actually exist
ALL_EXISTING_SOURCE_DIRS := $(wildcard $(ALL_SOURCE_DIRS))
@@ -152,60 +152,60 @@
$(subst $(SPACE),$(PATH_SEP),$(strip $(ALL_SOURCE_DIRS)))
define prep-target
-$(MKDIR) -p $(@D)
-$(RM) $@
+ $(MKDIR) -p $(@D)
+ $(RM) $@
endef
# Prep for javadoc creation, assumes $@ is an index.html file
define prep-javadoc
-@if [ -f "$@" -a "$?" != "" ] ; then \
- $(ECHO) "# Dependencies have changed: $?"; \
-fi
-$(RM) -r $(@D)
-$(MKDIR) -p $(@D)
+ @if [ -f "$@" -a "$?" != "" ] ; then \
+ $(ECHO) "# Dependencies have changed: $?"; \
+ fi
+ $(RM) -r $(@D)
+ $(MKDIR) -p $(@D)
endef
# A cache of the directories in ALL_SOURCE_DIRS
DIRECTORY_CACHE = $(DOCSTMPDIR)/directory.cache
# Given a list of packages, return a list of files or dirs to be dependent on
-# (Currently only returning a list of directories)
+# (Currently only returning a list of directories)
define PackageDependencies # packages
-$(shell \
- if [ "$1" != "" -a -f $(DIRECTORY_CACHE) ] ; then \
- for p in $1 ; do \
- pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
- $(CAT) $(DIRECTORY_CACHE) | $(GREP) "/$${pd}/" ; \
- done; \
- fi \
-)
+ $(shell \
+ if [ "$1" != "" -a -f $(DIRECTORY_CACHE) ] ; then \
+ for p in $1 ; do \
+ pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
+ $(CAT) $(DIRECTORY_CACHE) | $(GREP) "/$${pd}/" ; \
+ done; \
+ fi \
+ )
endef
# Given a list of packages, add packages that exist to $@, print summary
define PackageFilter # packages
-@if [ "$1" != "" ] ; then \
- for p in $1 ; do \
- pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
- found="false"; \
- for cp in $(ALL_SOURCE_DIRS) ; do \
- if [ -d $${cp}/$${pd} ] ; then \
- $(ECHO) "$${p}" >> $@; \
- found="true"; \
- break; \
- fi; \
- done; \
- if [ "$${found}" = "false" ] ; then \
- $(ECHO) "WARNING: Package not found: $${p}"; \
- fi; \
- done; \
-fi
+ @if [ "$1" != "" ] ; then \
+ for p in $1 ; do \
+ pd=`$(ECHO) $${p} | $(SED) -e 's@[.]@/@g'`; \
+ found="false"; \
+ for cp in $(ALL_SOURCE_DIRS) ; do \
+ if [ -d $${cp}/$${pd} ] ; then \
+ $(ECHO) "$${p}" >> $@; \
+ found="true"; \
+ break; \
+ fi; \
+ done; \
+ if [ "$${found}" = "false" ] ; then \
+ $(ECHO) "WARNING: Package not found: $${p}"; \
+ fi; \
+ done; \
+ fi
endef
# Print out a summary of the javadoc command about to be run
define JavadocSummary # optionsfile packagesfile
-@$(ECHO) "# Summary for $@";\
- $(ECHO) "# Options (`$(BASENAME) $1`):"; $(SED) -e 's@^@# @' $1; \
- $(ECHO) "# Packages (`$(BASENAME) $2`):";$(SED) -e 's@^@# @' $2
+ @$(ECHO) "# Summary for $@"; \
+ $(ECHO) "# Options (`$(BASENAME) $1`):"; $(SED) -e 's@^@# @' $1; \
+ $(ECHO) "# Packages (`$(BASENAME) $2`):";$(SED) -e 's@^@# @' $2
endef
#
@@ -216,15 +216,15 @@
#
# Different api directories created from root directory
#
-COREAPI_DOCSDIR = $(DOCSDIR)/api
-JDK_API_DOCSDIR = $(DOCSDIR)/jdk/api
-JRE_API_DOCSDIR = $(DOCSDIR)/jre/api
-PLATFORM_DOCSDIR = $(DOCSDIR)/platform
+COREAPI_DOCSDIR = $(DOCSDIR)/api
+JDK_API_DOCSDIR = $(DOCSDIR)/jdk/api
+JRE_API_DOCSDIR = $(DOCSDIR)/jre/api
+PLATFORM_DOCSDIR = $(DOCSDIR)/platform
# The non-core api javadocs need to be able to access the root of the core
-# api directory, so for jdk/api or jre/api to get to the core api/
-# directory we would use this:
-JDKJRE2COREAPI = ../../api
+# api directory, so for jdk/api or jre/api to get to the core api/
+# directory we would use this:
+JDKJRE2COREAPI = ../../api
# Common bottom argument
define CommonBottom # year
@@ -241,13 +241,13 @@
# Common echo of option
define OptionOnly # opt
-$(PRINTF) "%s\n" "$1"
+ $(PRINTF) "%s\n" "$1"
endef
define OptionPair # opt arg
-$(PRINTF) "%s '%s'\n" "$1" '$2'
+ $(PRINTF) "%s '%s'\n" "$1" '$2'
endef
define OptionTrip # opt arg arg
-$(PRINTF) "%s '%s' '%s'\n" "$1" '$2' '$3'
+ $(PRINTF) "%s '%s' '%s'\n" "$1" '$2' '$3'
endef
# Core api bottom argument (with special sauce)
@@ -261,18 +261,18 @@
</font>
# Common javadoc options used by all
-COMMON_JAVADOCFLAGS = \
- -XDignore.symbol.file=true \
- -quiet \
- -use \
- -keywords \
- -Xdoclint:none \
- -Xprofilespath $(JDK_TOPDIR)/makefiles/profile-rtjar-includes.txt \
- $(ADDITIONAL_JAVADOCFLAGS)
+COMMON_JAVADOCFLAGS = \
+ -XDignore.symbol.file=true \
+ -quiet \
+ -use \
+ -keywords \
+ -Xdoclint:none \
+ -Xprofilespath $(JDK_TOPDIR)/makefiles/profile-rtjar-includes.txt \
+ $(ADDITIONAL_JAVADOCFLAGS)
ifdef OPENJDK
- ADDITIONAL_JAVADOCFLAGS = \
- -Xdocrootparent $(DOCS_BASE_URL)
+ ADDITIONAL_JAVADOCFLAGS = \
+ -Xdocrootparent $(DOCS_BASE_URL)
else
ADDITIONAL_JAVADOCFLAGS =
endif
@@ -280,11 +280,11 @@
# Draft used for non-fcs documents
DRAFT_HEADER =
ifneq ($(MILESTONE), fcs)
- DRAFT_HEADER = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
- DRAFT_BOTTOM = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
- DRAFT_WINTITLE = $(BUILD_NUMBER)
- # Early access top text (not used in FCS releases)
- COREAPI_TOP_EARLYACCESS = \
+ DRAFT_HEADER = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
+ DRAFT_BOTTOM = <br><strong>DRAFT $(MILESTONE)-$(BUILD_NUMBER)</strong>
+ DRAFT_WINTITLE = $(BUILD_NUMBER)
+ # Early access top text (not used in FCS releases)
+ COREAPI_TOP_EARLYACCESS = \
<div style="background-color: \#EEEEEE"> \
<div style="padding: 6px; margin-top: 2px; margin-bottom: 6px; \
margin-left: 6px; margin-right: 6px; text-align: justify; \
@@ -295,6 +295,7 @@
The information is being made available to you solely for purpose of \
evaluation. \
</div> </div>
+
endif
#################################################################
@@ -321,12 +322,12 @@
#################################################################
# Production Targets -- USE THESE TARGETS WHEN:
-# a) You're generating docs outside of release engineering's
-# standard control build.
-# b) The docs will be pushed to the web and/or included in
-# the downloaded doc bundle.
+# a) You're generating docs outside of release engineering's
+# standard control build.
+# b) The docs will be pushed to the web and/or included in
+# the downloaded doc bundle.
#
-# See: Notes.html#releaseTargets
+# See: Notes.html#releaseTargets
# Note: Spaces precede ifdef/ifndef indents. Tabs precede target commands (!)
#
@@ -336,20 +337,20 @@
@$(ECHO) " BUILD_NUMBER = $(BUILD_NUMBER)"
@$(ECHO) " MILESTONE = $(MILESTONE)"
@$(ECHO) ""
- ifeq ($(BUILD_NUMBER), b00)
- @$(ECHO) "ERROR: Build number must be defined"
- @$(ECHO) "MILESTONE is set to $(MILESTONE)"
- @$(ECHO) ""
- exit 1
- endif
+ ifeq ($(BUILD_NUMBER), b00)
+ @$(ECHO) "ERROR: Build number must be defined"
+ @$(ECHO) "MILESTONE is set to $(MILESTONE)"
+ @$(ECHO) ""
+ exit 1
+ endif
#############################################################
#
# coredocs
#
-COREAPI_DOCTITLE = Java$(TRADEMARK) Platform, Standard Edition \
+COREAPI_DOCTITLE = Java$(TRADEMARK) Platform, Standard Edition \
$(JDK_MINOR_VERSION)<br>API Specification
-COREAPI_WINDOWTITLE = Java Platform SE $(JDK_MINOR_VERSION)
+COREAPI_WINDOWTITLE = Java Platform SE $(JDK_MINOR_VERSION)
COREAPI_HEADER = \
<strong>Java$(TRADEMARK) Platform<br>Standard Ed. $(JDK_MINOR_VERSION)</strong>
@@ -361,8 +362,8 @@
COREAPI_OVERVIEW = $(JDK_SHARE_CLASSES)/overview-core.html
# The index.html, options, and packages files
-COREAPI_INDEX_FILE = $(COREAPI_DOCSDIR)/index.html
-COREAPI_OPTIONS_FILE = $(DOCSTMPDIR)/coredocs.options
+COREAPI_INDEX_FILE = $(COREAPI_DOCSDIR)/index.html
+COREAPI_OPTIONS_FILE = $(DOCSTMPDIR)/coredocs.options
COREAPI_PACKAGES_FILE = $(DOCSTMPDIR)/coredocs.packages
coredocs: $(COREAPI_INDEX_FILE)
@@ -375,43 +376,43 @@
$(prep-javadoc)
$(call JavadocSummary,$(COREAPI_OPTIONS_FILE),$(COREAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(COREAPI_OPTIONS_FILE) @$(COREAPI_PACKAGES_FILE)
+ @$(COREAPI_OPTIONS_FILE) @$(COREAPI_PACKAGES_FILE)
# Create file with javadoc options in it
$(COREAPI_OPTIONS_FILE): $(COREAPI_OVERVIEW)
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ISO-8859-1) ; \
- $(call OptionPair,-tag,beaninfo:X) ; \
- $(call OptionPair,-tag,revised:X) ; \
- $(call OptionPair,-tag,since.unbundled:X) ; \
- $(call OptionPair,-tag,spec:X) ; \
- $(call OptionPair,-tag,specdefault:X) ; \
- $(call OptionPair,-tag,Note:X) ; \
- $(call OptionPair,-tag,ToDo:X) ; \
- $(call OptionPair,-tag,apiNote:a:API Note:) ; \
- $(call OptionPair,-tag,implSpec:a:Implementation Requirements:) ; \
- $(call OptionPair,-tag,implNote:a:Implementation Note:) ; \
- $(call OptionPair,-tag,param) ; \
- $(call OptionPair,-tag,return) ; \
- $(call OptionPair,-tag,throws) ; \
- $(call OptionPair,-tag,since) ; \
- $(call OptionPair,-tag,version) ; \
- $(call OptionPair,-tag,serialData) ; \
- $(call OptionPair,-tag,factory) ; \
- $(call OptionPair,-tag,see) ; \
- $(call OptionPair,-tag,$(TAG_JLS)) ; \
- $(call OptionOnly,-splitIndex) ; \
- $(call OptionPair,-overview,$(COREAPI_OVERVIEW)) ; \
- $(call OptionPair,-doctitle,$(COREAPI_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(COREAPI_WINDOWTITLE) $(DRAFT_WINTITLE)) ;\
- $(call OptionPair,-header,$(COREAPI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(COREAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
- ) >> $@
-ifdef COREAPI_TOP_EARLYACCESS
- @$(call OptionPair,-top,$(COREAPI_TOP_EARLYACCESS)) >> $@
-endif
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ISO-8859-1) ; \
+ $(call OptionPair,-tag,beaninfo:X) ; \
+ $(call OptionPair,-tag,revised:X) ; \
+ $(call OptionPair,-tag,since.unbundled:X) ; \
+ $(call OptionPair,-tag,spec:X) ; \
+ $(call OptionPair,-tag,specdefault:X) ; \
+ $(call OptionPair,-tag,Note:X) ; \
+ $(call OptionPair,-tag,ToDo:X) ; \
+ $(call OptionPair,-tag,apiNote:a:API Note:) ; \
+ $(call OptionPair,-tag,implSpec:a:Implementation Requirements:) ; \
+ $(call OptionPair,-tag,implNote:a:Implementation Note:) ; \
+ $(call OptionPair,-tag,param) ; \
+ $(call OptionPair,-tag,return) ; \
+ $(call OptionPair,-tag,throws) ; \
+ $(call OptionPair,-tag,since) ; \
+ $(call OptionPair,-tag,version) ; \
+ $(call OptionPair,-tag,serialData) ; \
+ $(call OptionPair,-tag,factory) ; \
+ $(call OptionPair,-tag,see) ; \
+ $(call OptionPair,-tag,$(TAG_JLS)) ; \
+ $(call OptionOnly,-splitIndex) ; \
+ $(call OptionPair,-overview,$(COREAPI_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(COREAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(COREAPI_WINDOWTITLE) $(DRAFT_WINTITLE)) ; \
+ $(call OptionPair,-header,$(COREAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(COREAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ ) >> $@
+ ifdef COREAPI_TOP_EARLYACCESS
+ @$(call OptionPair,-top,$(COREAPI_TOP_EARLYACCESS)) >> $@
+ endif
# Create a file with the package names in it
$(COREAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(CORE_PKGS))
@@ -425,19 +426,19 @@
ALL_OTHER_TARGETS += docletapidocs
-DOCLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/doclet
-DOCLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
-DOCLETAPI_DOCTITLE := Doclet API
-DOCLETAPI_WINDOWTITLE := Doclet API
-DOCLETAPI_HEADER := <strong>Doclet API</strong>
-DOCLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOCLETAPI_FIRST_COPYRIGHT_YEAR))
-DOCLETAPI_GROUPNAME := Packages
-DOCLETAPI_REGEXP := com.sun.javadoc
+DOCLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/doclet
+DOCLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+DOCLETAPI_DOCTITLE := Doclet API
+DOCLETAPI_WINDOWTITLE := Doclet API
+DOCLETAPI_HEADER := <strong>Doclet API</strong>
+DOCLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOCLETAPI_FIRST_COPYRIGHT_YEAR))
+DOCLETAPI_GROUPNAME := Packages
+DOCLETAPI_REGEXP := com.sun.javadoc
# DOCLETAPI_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-DOCLETAPI_INDEX_FILE = $(DOCLETAPI_DOCDIR)/index.html
-DOCLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/docletapi.options
+DOCLETAPI_INDEX_FILE = $(DOCLETAPI_DOCDIR)/index.html
+DOCLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/docletapi.options
DOCLETAPI_PACKAGES_FILE = $(DOCSTMPDIR)/docletapi.packages
docletapidocs: $(DOCLETAPI_INDEX_FILE)
@@ -450,22 +451,22 @@
$(prep-javadoc)
$(call JavadocSummary,$(DOCLETAPI_OPTIONS_FILE),$(DOCLETAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(DOCLETAPI_OPTIONS_FILE) @$(DOCLETAPI_PACKAGES_FILE)
+ @$(DOCLETAPI_OPTIONS_FILE) @$(DOCLETAPI_PACKAGES_FILE)
# Create file with javadoc options in it
$(DOCLETAPI_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-breakiterator) ; \
- $(call OptionPair,-doctitle,$(DOCLETAPI_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(DOCLETAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(DOCLETAPI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(DOCLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-breakiterator) ; \
+ $(call OptionPair,-doctitle,$(DOCLETAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(DOCLETAPI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(DOCLETAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(DOCLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-group,$(DOCLETAPI_GROUPNAME),$(DOCLETAPI_REGEXP)); \
$(call OptionTrip,-linkoffline,$(DOCLETAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(DOCLETAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(DOCLETAPI_PKGS))
@@ -478,17 +479,17 @@
#
ALL_OTHER_TARGETS += tagletapidocs
-TAGLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/taglet
-TAGLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
-TAGLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(TAGLETAPI_FIRST_COPYRIGHT_YEAR))
+TAGLETAPI_DOCDIR := $(JDK_API_DOCSDIR)/javadoc/taglet
+TAGLETAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+TAGLETAPI_BOTTOM := $(call CommonTrademarkBottom,$(TAGLETAPI_FIRST_COPYRIGHT_YEAR))
# TAGLETAPI_FILE is located in NON_CORE_PKGS.gmk
# Temporary directory (special generation rules)
-TAGLETAPI_TEMPDIR = $(DOCSTMPDIR)/taglets_temp
+TAGLETAPI_TEMPDIR = $(DOCSTMPDIR)/taglets_temp
# The index.html, options, and packages files
-TAGLETAPI_INDEX_FILE = $(TAGLETAPI_DOCDIR)/index.html
-TAGLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/tagletapi.options
+TAGLETAPI_INDEX_FILE = $(TAGLETAPI_DOCDIR)/index.html
+TAGLETAPI_OPTIONS_FILE = $(DOCSTMPDIR)/tagletapi.options
TAGLETAPI_PACKAGES_FILE = $(DOCSTMPDIR)/tagletapi.packages
tagletapidocs: $(TAGLETAPI_INDEX_FILE)
@@ -503,7 +504,7 @@
$(MKDIR) -p $(TAGLETAPI_TEMPDIR)
$(call JavadocSummary,$(TAGLETAPI_OPTIONS_FILE),$(TAGLETAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(TAGLETAPI_TEMPDIR) \
- @$(TAGLETAPI_OPTIONS_FILE) @$(TAGLETAPI_PACKAGES_FILE)
+ @$(TAGLETAPI_OPTIONS_FILE) @$(TAGLETAPI_PACKAGES_FILE)
cp -r $(TAGLETAPI_TEMPDIR)/com $(@D)
cp $(TAGLETAPI_TEMPDIR)/stylesheet.css $(@D)
$(RM) -r $(TAGLETAPI_TEMPDIR)
@@ -511,14 +512,14 @@
# Create file with javadoc options in it
$(TAGLETAPI_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nonavbar) ; \
- $(call OptionOnly,-noindex) ; \
- $(call OptionPair,-bottom,$(TAGLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nonavbar) ; \
+ $(call OptionOnly,-noindex) ; \
+ $(call OptionPair,-bottom,$(TAGLETAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(TAGLETAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(TAGLETAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(TAGLETAPI_PKGS))
@@ -532,19 +533,19 @@
ALL_OTHER_TARGETS += domapidocs
-DOMAPI_DOCDIR := $(JRE_API_DOCSDIR)/plugin/dom
-DOMAPI2COREAPI := ../../$(JDKJRE2COREAPI)
-DOMAPI_DOCTITLE := Common DOM API
-DOMAPI_WINDOWTITLE := Common DOM API
-DOMAPI_HEADER := <strong>Common DOM API</strong>
-DOMAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOMAPI_FIRST_COPYRIGHT_YEAR))
-DOMAPI_GROUPNAME := Packages
-DOMAPI_REGEXP := com.sun.java.browser.dom:org.w3c.dom*
+DOMAPI_DOCDIR := $(JRE_API_DOCSDIR)/plugin/dom
+DOMAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+DOMAPI_DOCTITLE := Common DOM API
+DOMAPI_WINDOWTITLE := Common DOM API
+DOMAPI_HEADER := <strong>Common DOM API</strong>
+DOMAPI_BOTTOM := $(call CommonTrademarkBottom,$(DOMAPI_FIRST_COPYRIGHT_YEAR))
+DOMAPI_GROUPNAME := Packages
+DOMAPI_REGEXP := com.sun.java.browser.dom:org.w3c.dom*
# DOMAPI_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-DOMAPI_INDEX_FILE = $(DOMAPI_DOCDIR)/index.html
-DOMAPI_OPTIONS_FILE = $(DOCSTMPDIR)/domapi.options
+DOMAPI_INDEX_FILE = $(DOMAPI_DOCDIR)/index.html
+DOMAPI_OPTIONS_FILE = $(DOCSTMPDIR)/domapi.options
DOMAPI_PACKAGES_FILE = $(DOCSTMPDIR)/domapi.packages
domapidocs: $(DOMAPI_INDEX_FILE)
@@ -557,22 +558,22 @@
$(prep-javadoc)
$(call JavadocSummary,$(DOMAPI_OPTIONS_FILE),$(DOMAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(DOMAPI_OPTIONS_FILE) @$(DOMAPI_PACKAGES_FILE)
+ @$(DOMAPI_OPTIONS_FILE) @$(DOMAPI_PACKAGES_FILE)
# Create file with javadoc options in it
$(DOMAPI_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-splitIndex) ; \
- $(call OptionPair,-doctitle,$(DOMAPI_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(DOMAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(DOMAPI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(DOMAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-splitIndex) ; \
+ $(call OptionPair,-doctitle,$(DOMAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(DOMAPI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(DOMAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(DOMAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-group,$(DOMAPI_GROUPNAME),$(DOMAPI_REGEXP)); \
$(call OptionTrip,-linkoffline,$(DOMAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(DOMAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(DOMAPI_PKGS))
@@ -595,18 +596,18 @@
ALL_OTHER_TARGETS += jdidocs
-JDI_DOCDIR := $(JDK_API_DOCSDIR)/jpda/jdi
-JDI2COREAPI := ../../$(JDKJRE2COREAPI)
-JDI_DOCTITLE := Java$(TRADEMARK) Debug Interface
+JDI_DOCDIR := $(JDK_API_DOCSDIR)/jpda/jdi
+JDI2COREAPI := ../../$(JDKJRE2COREAPI)
+JDI_DOCTITLE := Java$(TRADEMARK) Debug Interface
JDI_WINDOWTITLE := Java Debug Interface
-JDI_HEADER := <strong>Java Debug Interface</strong>
-JDI_BOTTOM := $(call CommonBottom,$(JDI_FIRST_COPYRIGHT_YEAR))
-JDI_OVERVIEW := $(JDK_SHARE_CLASSES)/jdi-overview.html
+JDI_HEADER := <strong>Java Debug Interface</strong>
+JDI_BOTTOM := $(call CommonBottom,$(JDI_FIRST_COPYRIGHT_YEAR))
+JDI_OVERVIEW := $(JDK_SHARE_CLASSES)/jdi-overview.html
# JDI_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-JDI_INDEX_FILE = $(JDI_DOCDIR)/index.html
-JDI_OPTIONS_FILE = $(DOCSTMPDIR)/jdi.options
+JDI_INDEX_FILE = $(JDI_DOCDIR)/index.html
+JDI_OPTIONS_FILE = $(DOCSTMPDIR)/jdi.options
JDI_PACKAGES_FILE = $(DOCSTMPDIR)/jdi.packages
jdidocs: $(JDI_INDEX_FILE)
@@ -619,21 +620,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(JDI_OPTIONS_FILE),$(JDI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(JDI_OPTIONS_FILE) @$(JDI_PACKAGES_FILE)
+ @$(JDI_OPTIONS_FILE) @$(JDI_PACKAGES_FILE)
# Create file with javadoc options in it
$(JDI_OPTIONS_FILE): $(JDI_OVERVIEW)
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionPair,-overview,$(JDI_OVERVIEW)) ; \
- $(call OptionPair,-doctitle,$(JDI_DOCTITLE)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-overview,$(JDI_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JDI_DOCTITLE)) ; \
$(call OptionPair,-windowtitle,$(JDI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
- $(call OptionPair,-header,$(JDI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(JDI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionPair,-header,$(JDI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JDI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(JDI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(JDI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JDI_PKGS))
@@ -647,7 +648,7 @@
ALL_OTHER_TARGETS += jdwpdocs
-JDWP_DOCDIR = $(PLATFORM_DOCSDIR)/jpda/jdwp
+JDWP_DOCDIR = $(PLATFORM_DOCSDIR)/jpda/jdwp
jdwpdocs: $(JDWP_DOCDIR)/jdwp-protocol.html
$(JDWP_DOCDIR)/jdwp-protocol.html : $(JDK_OUTPUTDIR)/gensrc_jdwp_doc/jdwp-protocol.html
@@ -662,16 +663,16 @@
ALL_OTHER_TARGETS += jvmtidocs
-JVMTI_DOCDIR = $(PLATFORM_DOCSDIR)/jvmti
-JVMTI_HTML = $(HOTSPOT_DIST)/docs/platform/jvmti/jvmti.html
+JVMTI_DOCDIR = $(PLATFORM_DOCSDIR)/jvmti
+JVMTI_HTML = $(HOTSPOT_DIST)/docs/platform/jvmti/jvmti.html
-jvmtidocs: $(JVMTI_DOCDIR)/jvmti.html
+jvmtidocs: $(JVMTI_DOCDIR)/jvmti.html
$(JVMTI_DOCDIR)/jvmti.html:
@$(prep-javadoc)
- @if [ -f $(JVMTI_HTML) ] ; then \
- $(ECHO) "$(CP) $(JVMTI_HTML) $@"; \
- $(CP) $(JVMTI_HTML) $@; \
- else \
+ @if [ -f $(JVMTI_HTML) ] ; then \
+ $(ECHO) "$(CP) $(JVMTI_HTML) $@"; \
+ $(CP) $(JVMTI_HTML) $@; \
+ else \
$(ECHO) "WARNING: Generated file does not exist: $(JVMTI_HTML)"; \
fi
@@ -682,18 +683,18 @@
ALL_OTHER_TARGETS += jaasdocs
-JAAS_DOCDIR := $(JRE_API_DOCSDIR)/security/jaas/spec
-JAAS2COREAPI := ../../../$(JDKJRE2COREAPI)
-JAAS_DOCTITLE := Java$(TRADEMARK) Authentication and Authorization Service
+JAAS_DOCDIR := $(JRE_API_DOCSDIR)/security/jaas/spec
+JAAS2COREAPI := ../../../$(JDKJRE2COREAPI)
+JAAS_DOCTITLE := Java$(TRADEMARK) Authentication and Authorization Service
JAAS_WINDOWTITLE := Java Authentication and Authorization Service
-JAAS_HEADER := <strong>Java Authentication and Authorization Service</strong>
-JAAS_BOTTOM := $(call CommonBottom,$(JAAS_FIRST_COPYRIGHT_YEAR))
+JAAS_HEADER := <strong>Java Authentication and Authorization Service</strong>
+JAAS_BOTTOM := $(call CommonBottom,$(JAAS_FIRST_COPYRIGHT_YEAR))
# JAAS_PKGS is located in NON_CORE_PKGS.gmk
-JAAS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/auth/jaas-overview.html
+JAAS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/auth/jaas-overview.html
# The index.html, options, and packages files
-JAAS_INDEX_FILE = $(JAAS_DOCDIR)/index.html
-JAAS_OPTIONS_FILE = $(DOCSTMPDIR)/jaas.options
+JAAS_INDEX_FILE = $(JAAS_DOCDIR)/index.html
+JAAS_OPTIONS_FILE = $(DOCSTMPDIR)/jaas.options
JAAS_PACKAGES_FILE = $(DOCSTMPDIR)/jaas.packages
jaasdocs: $(JAAS_INDEX_FILE)
@@ -706,21 +707,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(JAAS_OPTIONS_FILE),$(JAAS_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(JAAS_OPTIONS_FILE) @$(JAAS_PACKAGES_FILE)
+ @$(JAAS_OPTIONS_FILE) @$(JAAS_PACKAGES_FILE)
# Create file with javadoc options in it
$(JAAS_OPTIONS_FILE): $(JAAS_OVERVIEW)
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionPair,-overview,$(JAAS_OVERVIEW)) ; \
- $(call OptionPair,-doctitle,$(JAAS_DOCTITLE)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-overview,$(JAAS_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JAAS_DOCTITLE)) ; \
$(call OptionPair,-windowtitle,$(JAAS_WINDOWTITLE) $(DRAFT_WINTITLE)); \
- $(call OptionPair,-header,$(JAAS_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(JAAS_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionPair,-header,$(JAAS_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JAAS_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(JAAS2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(JAAS_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JAAS_PKGS))
@@ -734,18 +735,18 @@
ALL_OTHER_TARGETS += jgssdocs
-JGSS_DOCDIR := $(JRE_API_DOCSDIR)/security/jgss/spec
-JGSS2COREAPI := ../../../$(JDKJRE2COREAPI)
-JGSS_DOCTITLE := Java$(TRADEMARK) GSS-API Utilities
+JGSS_DOCDIR := $(JRE_API_DOCSDIR)/security/jgss/spec
+JGSS2COREAPI := ../../../$(JDKJRE2COREAPI)
+JGSS_DOCTITLE := Java$(TRADEMARK) GSS-API Utilities
JGSS_WINDOWTITLE := Java GSS-API Utilities
-JGSS_HEADER := <strong>Java GSS-API Utilities</strong>
-JGSS_BOTTOM := $(call CommonBottom,$(JGSS_FIRST_COPYRIGHT_YEAR))
-JGSS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/jgss/jgss-overview.html
+JGSS_HEADER := <strong>Java GSS-API Utilities</strong>
+JGSS_BOTTOM := $(call CommonBottom,$(JGSS_FIRST_COPYRIGHT_YEAR))
+JGSS_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/security/jgss/jgss-overview.html
# JGSS_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-JGSS_INDEX_FILE = $(JGSS_DOCDIR)/index.html
-JGSS_OPTIONS_FILE = $(DOCSTMPDIR)/jgss.options
+JGSS_INDEX_FILE = $(JGSS_DOCDIR)/index.html
+JGSS_OPTIONS_FILE = $(DOCSTMPDIR)/jgss.options
JGSS_PACKAGES_FILE = $(DOCSTMPDIR)/jgss.packages
jgssdocs: $(JGSS_INDEX_FILE)
@@ -758,22 +759,22 @@
$(prep-javadoc)
$(call JavadocSummary,$(JGSS_OPTIONS_FILE),$(JGSS_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(JGSS_OPTIONS_FILE) @$(JGSS_PACKAGES_FILE)
+ @$(JGSS_OPTIONS_FILE) @$(JGSS_PACKAGES_FILE)
# Create file with javadoc options in it
$(JGSS_OPTIONS_FILE): $(JGSS_OVERVIEW)
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-overview,$(JGSS_OVERVIEW)) ; \
- $(call OptionPair,-doctitle,$(JGSS_DOCTITLE)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-overview,$(JGSS_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(JGSS_DOCTITLE)) ; \
$(call OptionPair,-windowtitle,$(JGSS_WINDOWTITLE) $(DRAFT_WINTITLE)); \
- $(call OptionPair,-header,$(JGSS_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(JGSS_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionPair,-header,$(JGSS_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JGSS_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(JGSS2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(JGSS_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JGSS_PKGS))
@@ -787,17 +788,17 @@
ALL_OTHER_TARGETS += smartcardiodocs
-SMARTCARDIO_DOCDIR := $(JRE_API_DOCSDIR)/security/smartcardio/spec
-SMARTCARDIO2COREAPI := ../../../$(JDKJRE2COREAPI)
-SMARTCARDIO_DOCTITLE := Java$(TRADEMARK) Smart Card I/O
+SMARTCARDIO_DOCDIR := $(JRE_API_DOCSDIR)/security/smartcardio/spec
+SMARTCARDIO2COREAPI := ../../../$(JDKJRE2COREAPI)
+SMARTCARDIO_DOCTITLE := Java$(TRADEMARK) Smart Card I/O
SMARTCARDIO_WINDOWTITLE := Java Smart Card I/O
-SMARTCARDIO_HEADER := <strong>Java Smart Card I/O</strong>
-SMARTCARDIO_BOTTOM := $(call CommonBottom,$(SMARTCARDIO_FIRST_COPYRIGHT_YEAR))
+SMARTCARDIO_HEADER := <strong>Java Smart Card I/O</strong>
+SMARTCARDIO_BOTTOM := $(call CommonBottom,$(SMARTCARDIO_FIRST_COPYRIGHT_YEAR))
# SMARTCARDIO_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-SMARTCARDIO_INDEX_FILE = $(SMARTCARDIO_DOCDIR)/index.html
-SMARTCARDIO_OPTIONS_FILE = $(DOCSTMPDIR)/smartcardio.options
+SMARTCARDIO_INDEX_FILE = $(SMARTCARDIO_DOCDIR)/index.html
+SMARTCARDIO_OPTIONS_FILE = $(DOCSTMPDIR)/smartcardio.options
SMARTCARDIO_PACKAGES_FILE = $(DOCSTMPDIR)/smartcardio.packages
smartcardiodocs: $(SMARTCARDIO_INDEX_FILE)
@@ -810,21 +811,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(SMARTCARDIO_OPTIONS_FILE),$(SMARTCARDIO_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(SMARTCARDIO_OPTIONS_FILE) @$(SMARTCARDIO_PACKAGES_FILE)
+ @$(SMARTCARDIO_OPTIONS_FILE) @$(SMARTCARDIO_PACKAGES_FILE)
# Create file with javadoc options in it
$(SMARTCARDIO_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-doctitle,$(SMARTCARDIO_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(SMARTCARDIO_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(SMARTCARDIO_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(SMARTCARDIO_WINDOWTITLE) $(DRAFT_WINTITLE)); \
$(call OptionPair,-header,$(SMARTCARDIO_HEADER)$(DRAFT_HEADER)); \
$(call OptionPair,-bottom,$(SMARTCARDIO_BOTTOM)$(DRAFT_BOTTOM)); \
$(call OptionTrip,-linkoffline,$(SMARTCARDIO2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(SMARTCARDIO_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(SMARTCARDIO_PKGS))
@@ -838,16 +839,16 @@
ALL_OTHER_TARGETS += httpserverdocs
-HTTPSERVER_DOCDIR := $(JRE_API_DOCSDIR)/net/httpserver/spec
-HTTPSERVER2COREAPI := ../../../$(JDKJRE2COREAPI)
-HTTPSERVER_DOCTITLE := Java$(TRADEMARK) HTTP Server
+HTTPSERVER_DOCDIR := $(JRE_API_DOCSDIR)/net/httpserver/spec
+HTTPSERVER2COREAPI := ../../../$(JDKJRE2COREAPI)
+HTTPSERVER_DOCTITLE := Java$(TRADEMARK) HTTP Server
HTTPSERVER_WINDOWTITLE := Java HTTP Server
-HTTPSERVER_HEADER := <strong>Java HTTP Server</strong>
-HTTPSERVER_BOTTOM := $(call CommonBottom,$(HTTPSERVER_FIRST_COPYRIGHT_YEAR))
+HTTPSERVER_HEADER := <strong>Java HTTP Server</strong>
+HTTPSERVER_BOTTOM := $(call CommonBottom,$(HTTPSERVER_FIRST_COPYRIGHT_YEAR))
# HTTPSERVER_PKGS is located in NON_CORE_PKGS.gmk
-HTTPSERVER_INDEX_HTML = $(HTTPSERVER_DOCDIR)/index.html
-HTTPSERVER_OPTIONS_FILE = $(DOCSTMPDIR)/httpserver.options
+HTTPSERVER_INDEX_HTML = $(HTTPSERVER_DOCDIR)/index.html
+HTTPSERVER_OPTIONS_FILE = $(DOCSTMPDIR)/httpserver.options
HTTPSERVER_PACKAGES_FILE = $(DOCSTMPDIR)/httpserver.packages
httpserverdocs: $(HTTPSERVER_INDEX_HTML)
@@ -860,21 +861,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(HTTPSERVER_OPTIONS_FILE),$(HTTPSERVER_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(HTTPSERVER_OPTIONS_FILE) @$(HTTPSERVER_PACKAGES_FILE)
+ @$(HTTPSERVER_OPTIONS_FILE) @$(HTTPSERVER_PACKAGES_FILE)
# Create file with javadoc options in it
$(HTTPSERVER_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-doctitle,$(HTTPSERVER_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(HTTPSERVER_WINDOWTITLE) $(DRAFT_WINTITLE));\
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(HTTPSERVER_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(HTTPSERVER_WINDOWTITLE) $(DRAFT_WINTITLE)); \
$(call OptionPair,-header,$(HTTPSERVER_HEADER)$(DRAFT_HEADER)); \
$(call OptionPair,-bottom,$(HTTPSERVER_BOTTOM)$(DRAFT_BOTTOM)); \
$(call OptionTrip,-linkoffline,$(HTTPSERVER2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(HTTPSERVER_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(HTTPSERVER_PKGS))
@@ -888,20 +889,20 @@
ALL_OTHER_TARGETS += mgmtdocs
-MGMT_DOCDIR := $(JRE_API_DOCSDIR)/management/extension
-MGMT2COREAPI := ../../$(JDKJRE2COREAPI)
-JVM_MIB_NAME := JVM-MANAGEMENT-MIB.mib
-JVM_MIB_SRC := $(JDK_TOPDIR)/src/closed/share/classes/sun/management/snmp/$(JVM_MIB_NAME)
-MGMT_DOCTITLE := Monitoring and Management Interface for the Java$(TRADEMARK) Platform
+MGMT_DOCDIR := $(JRE_API_DOCSDIR)/management/extension
+MGMT2COREAPI := ../../$(JDKJRE2COREAPI)
+JVM_MIB_NAME := JVM-MANAGEMENT-MIB.mib
+JVM_MIB_SRC := $(JDK_TOPDIR)/src/closed/share/classes/sun/management/snmp/$(JVM_MIB_NAME)
+MGMT_DOCTITLE := Monitoring and Management Interface for the Java$(TRADEMARK) Platform
MGMT_WINDOWTITLE := Monitoring and Management Interface for the Java Platform
-MGMT_HEADER := <strong>Monitoring and Management Interface for the Java Platform</strong>
-MGMT_BOTTOM := $(call CommonBottom,$(MGMT_FIRST_COPYRIGHT_YEAR))
-MGMT_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/management/mgmt-overview.html
+MGMT_HEADER := <strong>Monitoring and Management Interface for the Java Platform</strong>
+MGMT_BOTTOM := $(call CommonBottom,$(MGMT_FIRST_COPYRIGHT_YEAR))
+MGMT_OVERVIEW := $(JDK_SHARE_CLASSES)/com/sun/management/mgmt-overview.html
# MGMT_PKGS is located in NON_CORE_PKGS.gmk
# The index.html, options, and packages files
-MGMT_INDEX_FILE = $(MGMT_DOCDIR)/index.html
-MGMT_OPTIONS_FILE = $(DOCSTMPDIR)/mgmt.options
+MGMT_INDEX_FILE = $(MGMT_DOCDIR)/index.html
+MGMT_OPTIONS_FILE = $(DOCSTMPDIR)/mgmt.options
MGMT_PACKAGES_FILE = $(DOCSTMPDIR)/mgmt.packages
mgmtdocs: $(MGMT_INDEX_FILE)
@@ -912,30 +913,30 @@
# Run javadoc if the index file is out of date or missing
$(MGMT_INDEX_FILE): $(MGMT_OPTIONS_FILE) $(MGMT_PACKAGES_FILE) coredocs
$(prep-javadoc)
- @if [ -f $(JVM_MIB_SRC) ] ; then \
- $(ECHO) "$(CP) $(JVM_MIB_SRC) $(@D)/.."; \
- $(CP) $(JVM_MIB_SRC) $(@D)/.. ; \
- else \
- $(ECHO) "WARNING: File $(JVM_MIB_NAME) not available."; \
+ @if [ -f $(JVM_MIB_SRC) ] ; then \
+ $(ECHO) "$(CP) $(JVM_MIB_SRC) $(@D)/.."; \
+ $(CP) $(JVM_MIB_SRC) $(@D)/.. ; \
+ else \
+ $(ECHO) "WARNING: File $(JVM_MIB_NAME) not available."; \
fi
$(call JavadocSummary,$(MGMT_OPTIONS_FILE),$(MGMT_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(MGMT_OPTIONS_FILE) @$(MGMT_PACKAGES_FILE)
+ @$(MGMT_OPTIONS_FILE) @$(MGMT_PACKAGES_FILE)
# Create file with javadoc options in it
$(MGMT_OPTIONS_FILE): $(MGMT_OVERVIEW)
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-overview,$(MGMT_OVERVIEW)) ; \
- $(call OptionPair,-doctitle,$(MGMT_DOCTITLE)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-overview,$(MGMT_OVERVIEW)) ; \
+ $(call OptionPair,-doctitle,$(MGMT_DOCTITLE)) ; \
$(call OptionPair,-windowtitle,$(MGMT_WINDOWTITLE) $(DRAFT_WINTITLE)); \
- $(call OptionPair,-header,$(MGMT_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(MGMT_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ $(call OptionPair,-header,$(MGMT_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(MGMT_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(MGMT2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(MGMT_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(MGMT_PKGS))
@@ -949,16 +950,16 @@
ALL_OTHER_TARGETS += attachdocs
-ATTACH_DOCDIR := $(JDK_API_DOCSDIR)/attach/spec
-ATTACH2COREAPI := ../../$(JDKJRE2COREAPI)
-ATTACH_DOCTITLE := Attach API
+ATTACH_DOCDIR := $(JDK_API_DOCSDIR)/attach/spec
+ATTACH2COREAPI := ../../$(JDKJRE2COREAPI)
+ATTACH_DOCTITLE := Attach API
ATTACH_WINDOWTITLE := Attach API
-ATTACH_HEADER := <strong>Attach API</strong>
-ATTACH_BOTTOM := $(call CommonBottom,$(ATTACH_FIRST_COPYRIGHT_YEAR))
+ATTACH_HEADER := <strong>Attach API</strong>
+ATTACH_BOTTOM := $(call CommonBottom,$(ATTACH_FIRST_COPYRIGHT_YEAR))
# ATTACH_PKGS is located in NON_CORE_PKGS.gmk
-ATTACH_INDEX_HTML = $(ATTACH_DOCDIR)/index.html
-ATTACH_OPTIONS_FILE = $(DOCSTMPDIR)/attach.options
+ATTACH_INDEX_HTML = $(ATTACH_DOCDIR)/index.html
+ATTACH_OPTIONS_FILE = $(DOCSTMPDIR)/attach.options
ATTACH_PACKAGES_FILE = $(DOCSTMPDIR)/attach.packages
attachdocs: $(ATTACH_INDEX_HTML)
@@ -971,21 +972,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(ATTACH_OPTIONS_FILE),$(ATTACH_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(ATTACH_OPTIONS_FILE) @$(ATTACH_PACKAGES_FILE)
+ @$(ATTACH_OPTIONS_FILE) @$(ATTACH_PACKAGES_FILE)
# Create file with javadoc options in it
$(ATTACH_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-doctitle,$(ATTACH_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(ATTACH_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(ATTACH_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(ATTACH_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(ATTACH_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(ATTACH_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(ATTACH_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(ATTACH_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(ATTACH2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(ATTACH_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(ATTACH_PKGS))
@@ -999,16 +1000,16 @@
ALL_OTHER_TARGETS += jconsoledocs
-JCONSOLE_DOCDIR := $(JDK_API_DOCSDIR)/jconsole/spec
-JCONSOLE2COREAPI := ../../$(JDKJRE2COREAPI)
-JCONSOLE_DOCTITLE := JConsole API
+JCONSOLE_DOCDIR := $(JDK_API_DOCSDIR)/jconsole/spec
+JCONSOLE2COREAPI := ../../$(JDKJRE2COREAPI)
+JCONSOLE_DOCTITLE := JConsole API
JCONSOLE_WINDOWTITLE := JConsole API
-JCONSOLE_HEADER := <strong>JConsole API</strong>
-JCONSOLE_BOTTOM := $(call CommonBottom,$(JCONSOLE_FIRST_COPYRIGHT_YEAR))
+JCONSOLE_HEADER := <strong>JConsole API</strong>
+JCONSOLE_BOTTOM := $(call CommonBottom,$(JCONSOLE_FIRST_COPYRIGHT_YEAR))
# JCONSOLE_PKGS is located in NON_CORE_PKGS.gmk
-JCONSOLE_INDEX_HTML = $(JCONSOLE_DOCDIR)/index.html
-JCONSOLE_OPTIONS_FILE = $(DOCSTMPDIR)/jconsole.options
+JCONSOLE_INDEX_HTML = $(JCONSOLE_DOCDIR)/index.html
+JCONSOLE_OPTIONS_FILE = $(DOCSTMPDIR)/jconsole.options
JCONSOLE_PACKAGES_FILE = $(DOCSTMPDIR)/jconsole.packages
jconsoledocs: $(JCONSOLE_INDEX_HTML)
@@ -1021,21 +1022,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(JCONSOLE_OPTIONS_FILE),$(JCONSOLE_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(JCONSOLE_OPTIONS_FILE) @$(JCONSOLE_PACKAGES_FILE)
+ @$(JCONSOLE_OPTIONS_FILE) @$(JCONSOLE_PACKAGES_FILE)
# Create file with javadoc options in it
$(JCONSOLE_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-doctitle,$(JCONSOLE_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(JCONSOLE_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(JCONSOLE_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(JCONSOLE_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(JCONSOLE_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(JCONSOLE_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(JCONSOLE_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(JCONSOLE_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(JCONSOLE2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(JCONSOLE_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(JCONSOLE_PKGS))
@@ -1049,18 +1050,18 @@
ALL_OTHER_TARGETS += treeapidocs
-TREEAPI_DOCDIR := $(JDK_API_DOCSDIR)/javac/tree
-TREEAPI2COREAPI := ../../$(JDKJRE2COREAPI)
-TREEAPI_DOCTITLE := Compiler Tree API
-TREEAPI_WINDOWTITLE := Compiler Tree API
-TREEAPI_HEADER := <strong>Compiler Tree API</strong>
-TREEAPI_BOTTOM := $(call CommonBottom,$(TREEAPI_FIRST_COPYRIGHT_YEAR))
-TREEAPI_GROUPNAME := Packages
-TREEAPI_REGEXP := com.sun.source.*
+TREEAPI_DOCDIR := $(JDK_API_DOCSDIR)/javac/tree
+TREEAPI2COREAPI := ../../$(JDKJRE2COREAPI)
+TREEAPI_DOCTITLE := Compiler Tree API
+TREEAPI_WINDOWTITLE := Compiler Tree API
+TREEAPI_HEADER := <strong>Compiler Tree API</strong>
+TREEAPI_BOTTOM := $(call CommonBottom,$(TREEAPI_FIRST_COPYRIGHT_YEAR))
+TREEAPI_GROUPNAME := Packages
+TREEAPI_REGEXP := com.sun.source.*
# TREEAPI_PKGS is located in NON_CORE_PKGS.gmk
-TREEAPI_INDEX_HTML = $(TREEAPI_DOCDIR)/index.html
-TREEAPI_OPTIONS_FILE = $(DOCSTMPDIR)/treeapi.options
+TREEAPI_INDEX_HTML = $(TREEAPI_DOCDIR)/index.html
+TREEAPI_OPTIONS_FILE = $(DOCSTMPDIR)/treeapi.options
TREEAPI_PACKAGES_FILE = $(DOCSTMPDIR)/treeapi.packages
treeapidocs: $(TREEAPI_INDEX_HTML)
@@ -1073,22 +1074,22 @@
$(prep-javadoc)
$(call JavadocSummary,$(TREEAPI_OPTIONS_FILE),$(TREEAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(TREEAPI_OPTIONS_FILE) @$(TREEAPI_PACKAGES_FILE)
+ @$(TREEAPI_OPTIONS_FILE) @$(TREEAPI_PACKAGES_FILE)
# Create file with javadoc options in it
$(TREEAPI_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionPair,-doctitle,$(TREEAPI_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(TREEAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(TREEAPI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-tag,$(TAG_JLS)) ; \
- $(call OptionPair,-bottom,$(TREEAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionPair,-doctitle,$(TREEAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(TREEAPI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(TREEAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-tag,$(TAG_JLS)) ; \
+ $(call OptionPair,-bottom,$(TREEAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-group,$(TREEAPI_GROUPNAME),$(TREEAPI_REGEXP)); \
$(call OptionTrip,-linkoffline,$(TREEAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(TREEAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(TREEAPI_PKGS))
@@ -1102,16 +1103,16 @@
ALL_OTHER_TARGETS += sctpdocs
-SCTPAPI_DOCDIR := $(JRE_API_DOCSDIR)/nio/sctp/spec
-SCTPAPI2COREAPI := ../../../$(JDKJRE2COREAPI)
-SCTPAPI_DOCTITLE := SCTP API
+SCTPAPI_DOCDIR := $(JRE_API_DOCSDIR)/nio/sctp/spec
+SCTPAPI2COREAPI := ../../../$(JDKJRE2COREAPI)
+SCTPAPI_DOCTITLE := SCTP API
SCTPAPI_WINDOWTITLE := SCTP API
-SCTPAPI_HEADER := <strong>SCTP API</strong>
-SCTPAPI_BOTTOM := $(call CommonBottom,$(SCTPAPI_FIRST_COPYRIGHT_YEAR))
+SCTPAPI_HEADER := <strong>SCTP API</strong>
+SCTPAPI_BOTTOM := $(call CommonBottom,$(SCTPAPI_FIRST_COPYRIGHT_YEAR))
# SCTPAPI_PKGS is located in NON_CORE_PKGS.gmk
-SCTPAPI_INDEX_HTML = $(SCTPAPI_DOCDIR)/index.html
-SCTPAPI_OPTIONS_FILE = $(DOCSTMPDIR)/sctp.options
+SCTPAPI_INDEX_HTML = $(SCTPAPI_DOCDIR)/index.html
+SCTPAPI_OPTIONS_FILE = $(DOCSTMPDIR)/sctp.options
SCTPAPI_PACKAGES_FILE = $(DOCSTMPDIR)/sctp.packages
sctpdocs: $(SCTPAPI_INDEX_HTML)
@@ -1124,21 +1125,21 @@
$(prep-javadoc)
$(call JavadocSummary,$(SCTPAPI_OPTIONS_FILE),$(SCTPAPI_PACKAGES_FILE))
$(JAVADOC_CMD) -d $(@D) \
- @$(SCTPAPI_OPTIONS_FILE) @$(SCTPAPI_PACKAGES_FILE)
+ @$(SCTPAPI_OPTIONS_FILE) @$(SCTPAPI_PACKAGES_FILE)
# Create file with javadoc options in it
$(SCTPAPI_OPTIONS_FILE):
$(prep-target)
- @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
- $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
- $(call OptionPair,-encoding,ascii) ; \
- $(call OptionOnly,-nodeprecatedlist) ; \
- $(call OptionPair,-doctitle,$(SCTPAPI_DOCTITLE)) ; \
- $(call OptionPair,-windowtitle,$(SCTPAPI_WINDOWTITLE) $(DRAFT_WINTITLE));\
- $(call OptionPair,-header,$(SCTPAPI_HEADER)$(DRAFT_HEADER)) ; \
- $(call OptionPair,-bottom,$(SCTPAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
+ @($(call OptionOnly,$(COMMON_JAVADOCFLAGS)) ; \
+ $(call OptionPair,-sourcepath,$(RELEASEDOCS_SOURCEPATH)) ; \
+ $(call OptionPair,-encoding,ascii) ; \
+ $(call OptionOnly,-nodeprecatedlist) ; \
+ $(call OptionPair,-doctitle,$(SCTPAPI_DOCTITLE)) ; \
+ $(call OptionPair,-windowtitle,$(SCTPAPI_WINDOWTITLE) $(DRAFT_WINTITLE)); \
+ $(call OptionPair,-header,$(SCTPAPI_HEADER)$(DRAFT_HEADER)) ; \
+ $(call OptionPair,-bottom,$(SCTPAPI_BOTTOM)$(DRAFT_BOTTOM)) ; \
$(call OptionTrip,-linkoffline,$(SCTPAPI2COREAPI),$(COREAPI_DOCSDIR)/); \
- ) >> $@
+ ) >> $@
# Create a file with the package names in it
$(SCTPAPI_PACKAGES_FILE): $(DIRECTORY_CACHE) $(call PackageDependencies,$(SCTPAPI_PKGS))
@@ -1151,9 +1152,9 @@
$(DIRECTORY_CACHE): $(ALL_EXISTING_SOURCE_DIRS)
$(prep-target)
- @for cp in $(ALL_EXISTING_SOURCE_DIRS) ; do \
- $(ECHO) "$(FIND) $${cp} -type f >> $@"; \
- $(FIND) $${cp} -type f >> $@; \
+ @for cp in $(ALL_EXISTING_SOURCE_DIRS) ; do \
+ $(ECHO) "$(FIND) $${cp} -type f >> $@"; \
+ $(FIND) $${cp} -type f >> $@; \
done
#############################################################
@@ -1178,11 +1179,11 @@
# is set properly, and to help identify values we can use instead of making new ones.
# (Most of them come from common/shared/Defs.gmk)
#
-# Notes:
-# * BUILD_NUMBER defaults to b00 if not set on command line with BUILD_NUMBER=<value>
-# * MILESTONE defaults to internal unless set to beta, rc, or fcs on command line
+# Notes:
+# * BUILD_NUMBER defaults to b00 if not set on command line with BUILD_NUMBER=<value>
+# * MILESTONE defaults to internal unless set to beta, rc, or fcs on command line
#
#############################################################
.PHONY: all docs coredocs rel-docs otherdocs rel-coredocs \
- sanitycheckcoredocs $(ALL_OTHER_TARGETS)
+ sanitycheckcoredocs $(ALL_OTHER_TARGETS)
--- a/common/makefiles/javadoc/NON_CORE_PKGS.gmk Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/javadoc/NON_CORE_PKGS.gmk Thu Oct 10 14:58:19 2013 +0200
@@ -24,87 +24,87 @@
#
#
-# This file contains the package names of all the "non-core"
-# API published in the Java 2 SDK documentation. "Non-core" means
+# This file contains the package names of all the "non-core"
+# API published in the Java 2 SDK documentation. "Non-core" means
# it includes all published API outside of the JDK API specification.
#
-# These environment variables are used by javadoc in
+# These environment variables are used by javadoc in
# make/docs/Makefile and are referenced by the localization
# team when determining which APIs to extract javadoc
# comments from.
-DOMAPI_PKGS = com.sun.java.browser.dom \
- org.w3c.dom \
- org.w3c.dom.bootstrap \
- org.w3c.dom.ls \
- org.w3c.dom.ranges \
- org.w3c.dom.traversal \
- org.w3c.dom.html \
- org.w3c.dom.stylesheets \
- org.w3c.dom.css \
- org.w3c.dom.events \
- org.w3c.dom.views
+DOMAPI_PKGS = com.sun.java.browser.dom \
+ org.w3c.dom \
+ org.w3c.dom.bootstrap \
+ org.w3c.dom.ls \
+ org.w3c.dom.ranges \
+ org.w3c.dom.traversal \
+ org.w3c.dom.html \
+ org.w3c.dom.stylesheets \
+ org.w3c.dom.css \
+ org.w3c.dom.events \
+ org.w3c.dom.views
-JDI_PKGS = com.sun.jdi \
- com.sun.jdi.event \
- com.sun.jdi.request \
- com.sun.jdi.connect \
- com.sun.jdi.connect.spi
+JDI_PKGS = com.sun.jdi \
+ com.sun.jdi.event \
+ com.sun.jdi.request \
+ com.sun.jdi.connect \
+ com.sun.jdi.connect.spi
-MGMT_PKGS = com.sun.management
+MGMT_PKGS = com.sun.management
-JAAS_PKGS = com.sun.security.auth \
- com.sun.security.auth.callback \
- com.sun.security.auth.login \
- com.sun.security.auth.module
+JAAS_PKGS = com.sun.security.auth \
+ com.sun.security.auth.callback \
+ com.sun.security.auth.login \
+ com.sun.security.auth.module
-JGSS_PKGS = com.sun.security.jgss
+JGSS_PKGS = com.sun.security.jgss
-OLD_JSSE_PKGS = com.sun.net.ssl
+OLD_JSSE_PKGS = com.sun.net.ssl
-HTTPSERVER_PKGS = com.sun.net.httpserver \
- com.sun.net.httpserver.spi
+HTTPSERVER_PKGS = com.sun.net.httpserver \
+ com.sun.net.httpserver.spi
-NIO_PKGS = com.sun.nio.file
+NIO_PKGS = com.sun.nio.file
-DOCLETAPI_PKGS = com.sun.javadoc
+DOCLETAPI_PKGS = com.sun.javadoc
-TAGLETAPI_FILE = com/sun/tools/doclets/Taglet.java
+TAGLETAPI_FILE = com/sun/tools/doclets/Taglet.java
-TAGLETAPI_PKGS = com.sun.tools.doclets
+TAGLETAPI_PKGS = com.sun.tools.doclets
-ATTACH_PKGS = com.sun.tools.attach \
- com.sun.tools.attach.spi
+ATTACH_PKGS = com.sun.tools.attach \
+ com.sun.tools.attach.spi
-JCONSOLE_PKGS = com.sun.tools.jconsole
+JCONSOLE_PKGS = com.sun.tools.jconsole
-TREEAPI_PKGS = com.sun.source.doctree \
- com.sun.source.tree \
- com.sun.source.util \
- jdk
+TREEAPI_PKGS = com.sun.source.doctree \
+ com.sun.source.tree \
+ com.sun.source.util \
+ jdk
SMARTCARDIO_PKGS = javax.smartcardio
-SCTPAPI_PKGS = com.sun.nio.sctp
+SCTPAPI_PKGS = com.sun.nio.sctp
ifeq ($(PLATFORM), macosx)
-APPLE_EXT_PKGS = com.apple.concurrent \
- com.apple.eawt \
- com.apple.eawt.event \
- com.apple.eio
+ APPLE_EXT_PKGS = com.apple.concurrent \
+ com.apple.eawt \
+ com.apple.eawt.event \
+ com.apple.eio
endif
-JDK_PKGS = jdk
+JDK_PKGS = jdk
# non-core packages in rt.jar
-NON_CORE_PKGS = $(DOMAPI_PKGS) \
- $(MGMT_PKGS) \
- $(JAAS_PKGS) \
- $(JGSS_PKGS) \
- $(NIO_PKGS) \
- $(OLD_JSSE_PKGS) \
- $(HTTPSERVER_PKGS) \
- $(SMARTCARDIO_PKGS) \
- $(SCTPAPI_PKGS) \
- $(APPLE_EXT_PKGS) \
- $(JDK_PKGS)
+NON_CORE_PKGS = $(DOMAPI_PKGS) \
+ $(MGMT_PKGS) \
+ $(JAAS_PKGS) \
+ $(JGSS_PKGS) \
+ $(NIO_PKGS) \
+ $(OLD_JSSE_PKGS) \
+ $(HTTPSERVER_PKGS) \
+ $(SMARTCARDIO_PKGS) \
+ $(SCTPAPI_PKGS) \
+ $(APPLE_EXT_PKGS) \
+ $(JDK_PKGS)
--- a/common/makefiles/javadoc/Notes.html Wed Oct 09 18:51:32 2013 -0700
+++ b/common/makefiles/javadoc/Notes.html Thu Oct 10 14:58:19 2013 +0200
@@ -8,42 +8,42 @@
<body>
<h3><a name="REGEXP"></a><br>
REGEXP</h3>
-<p> REGEXP is a list of wildcard patterns that determines which packages listed
- in CORE_PKGS.gmk go into which summary-table on the main API index page. It
- was motivated by the need to divide the world into "core packages"
- (java.*) and "extension packages" (javax.*). In time, the distinction
- went away. The whole table is now called "Platform Packages"--which
- eliminated the need for this list of regular expressions. But it lingered on,
- accreting all of the packages in the JVM, one by one. I pruned it back to "*",
- so it now covers every package in the Java platform API docs. If some separation
- is needed in the future, it can grow back into a colon-separated list, starting
- with this, which is in all respects equivalent to "*" at this point
+<p> REGEXP is a list of wildcard patterns that determines which packages listed
+ in CORE_PKGS.gmk go into which summary-table on the main API index page. It
+ was motivated by the need to divide the world into "core packages"
+ (java.*) and "extension packages" (javax.*). In time, the distinction
+ went away. The whole table is now called "Platform Packages"--which
+ eliminated the need for this list of regular expressions. But it lingered on,
+ accreting all of the packages in the JVM, one by one. I pruned it back to "*",
+ so it now covers every package in the Java platform API docs. If some separation
+ is needed in the future, it can grow back into a colon-separated list, starting
+ with this, which is in all respects equivalent to "*" at this point
in time:</p>
-<blockquote>
+<blockquote>
<pre>REGEXP = "java.*:javax.*:org.ietf*:org.omg.</pre>
</blockquote>
<h3><a name="releaseTargets"></a><br>
Release Targets</h3>
<p> (Thanks to Kelly O'Hair for this info.)</p>
-<p> The <tt>rel-coredocs</tt> and <tt>rel-docs</tt> targets were added by Eric
- Armstrong. <tt>rel-coredocs</tt> assumes the kind of large, 32-bit machine used
- in the javapubs group's docs-release process. It specifies memory settings accordingly
+<p> The <tt>rel-coredocs</tt> and <tt>rel-docs</tt> targets were added by Eric
+ Armstrong. <tt>rel-coredocs</tt> assumes the kind of large, 32-bit machine used
+ in the javapubs group's docs-release process. It specifies memory settings accordingly
to maximize performance.</p>
-<p> The performance settings, like the sanity check, are most important for the
- core docs--the platform APIs. Running javadoc on those APIs takes a significant
- amount of time and memory. Setting the initial heap size as large as possible
- is important to prevent thrashing as the heap grows. Setting the maximum as
+<p> The performance settings, like the sanity check, are most important for the
+ core docs--the platform APIs. Running javadoc on those APIs takes a significant
+ amount of time and memory. Setting the initial heap size as large as possible
+ is important to prevent thrashing as the heap grows. Setting the maximum as
large as necessary is also important to keep the job from failing.</p>
<blockquote>
<p> <tt>-J-Xmx512</tt> sets a maximum of 512, which became necessary in 6.0<br>
<tt>-J-Xms256</tt> sets starting size to 256 (default is 8)</p>
</blockquote>
-<p> <tt>rel-coredocs</tt> also includes a sanity check to help ensure that <tt>BUILD_NUMBER</tt>
- and <tt>MILESTONE</tt> are specified properly when docs are built outside of
- the normal release engineering process, with the intention of releasing them
- on the web or in a downloaded docs bundle. (When invoked in release engineering's
- control build, the values are always set properly. But when the targets are
- run by themselves, they default to b00 and "internal"--which silently
+<p> <tt>rel-coredocs</tt> also includes a sanity check to help ensure that <tt>BUILD_NUMBER</tt>
+ and <tt>MILESTONE</tt> are specified properly when docs are built outside of
+ the normal release engineering process, with the intention of releasing them
+ on the web or in a downloaded docs bundle. (When invoked in release engineering's
+ control build, the values are always set properly. But when the targets are
+ run by themselves, they default to b00 and "internal"--which silently
sabotage the result of a build that can take many hours to complete.</p>
</body>
</html>